* [PATCH v3] staging: sm750fb: Code readability is improved
@ 2017-03-19 13:19 ` Arushi Singhal
0 siblings, 0 replies; 10+ messages in thread
From: Arushi Singhal @ 2017-03-19 13:07 UTC (permalink / raw)
To: sudipm.mukherjee
Cc: Teddy Wang, Greg Kroah-Hartman, linux-fbdev, devel, linux-kernel,
outreachy-kernel
New variables are added to make the code more readable.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
changes in v3
-try to make the code much more readable.
drivers/staging/sm750fb/ddk750_mode.c | 61 ++++++++++++++++++++---------------
1 file changed, 35 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index eea5aef2956f..5f18ce4d10de 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *
if (pll->clockType == SECONDARY_PLL) {
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- poke32(CRT_HORIZONTAL_TOTAL,
- (((pModeParam->horizontal_total - 1) <<
- CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
- CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->horizontal_display_end - 1) &
- CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
-
- poke32(CRT_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
- CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
- CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
- CRT_HORIZONTAL_SYNC_START_MASK));
- poke32(CRT_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
- CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
- CRT_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
- CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
-
- poke32(CRT_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
- CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
- CRT_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
- CRT_VERTICAL_SYNC_START_MASK));
+ unsigned int a = (pModeParam->horizontal_total - 1) <<
+ CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
+ unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
+ unsigned int c = (pModeParam->horizontal_display_end - 1) &
+ CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_HORIZONTAL_TOTAL, temp);
+
+ unsigned int a = (pModeParam->horizontal_sync_width <<
+ CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
+ unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
+ unsigned int c = (pModeParam->horizontal_sync_start - 1) &
+ CRT_HORIZONTAL_SYNC_START_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_HORIZONTAL_SYNC, temp);
+
+ unsigned int a = (pModeParam->vertical_total - 1) <<
+ CRT_VERTICAL_TOTAL_TOTAL_SHIFT;
+ unsigned int b = a & CRT_VERTICAL_TOTAL_TOTAL_MASK;
+ unsigned int c = (pModeParam->vertical_display_end - 1) &
+ CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_VERTICAL_TOTAL, temp);
+
+ unsigned int a = pModeParam->vertical_sync_height <<
+ CRT_VERTICAL_SYNC_HEIGHT_SHIFT;
+ unsigned int b = a & CRT_VERTICAL_SYNC_HEIGHT_MASK;
+ unsigned int c = (pModeParam->vertical_sync_start - 1) &
+ CRT_VERTICAL_SYNC_START_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_VERTICAL_SYNC, temp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
2017-03-19 13:19 ` Arushi Singhal
@ 2017-03-19 13:11 ` Julia Lawall
-1 siblings, 0 replies; 10+ messages in thread
From: Julia Lawall @ 2017-03-19 13:11 UTC (permalink / raw)
To: Arushi Singhal
Cc: sudipm.mukherjee, Teddy Wang, Greg Kroah-Hartman, linux-fbdev,
devel, linux-kernel, outreachy-kernel
On Sun, 19 Mar 2017, Arushi Singhal wrote:
> New variables are added to make the code more readable.
>
> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
> ---
> changes in v3
> -try to make the code much more readable.
>
> drivers/staging/sm750fb/ddk750_mode.c | 61 ++++++++++++++++++++---------------
> 1 file changed, 35 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> index eea5aef2956f..5f18ce4d10de 100644
> --- a/drivers/staging/sm750fb/ddk750_mode.c
> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *
> if (pll->clockType == SECONDARY_PLL) {
> /* programe secondary pixel clock */
> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
> - poke32(CRT_HORIZONTAL_TOTAL,
> - (((pModeParam->horizontal_total - 1) <<
> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->horizontal_display_end - 1) &
> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(CRT_HORIZONTAL_SYNC,
> - ((pModeParam->horizontal_sync_width <<
> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
> - ((pModeParam->horizontal_sync_start - 1) &
> - CRT_HORIZONTAL_SYNC_START_MASK));
>
> - poke32(CRT_VERTICAL_TOTAL,
> - (((pModeParam->vertical_total - 1) <<
> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->vertical_display_end - 1) &
> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(CRT_VERTICAL_SYNC,
> - ((pModeParam->vertical_sync_height <<
> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
> - ((pModeParam->vertical_sync_start - 1) &
> - CRT_VERTICAL_SYNC_START_MASK));
> + unsigned int a = (pModeParam->horizontal_total - 1) <<
> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
> + unsigned int c = (pModeParam->horizontal_display_end - 1) &
> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> + unsigned int temp = b | c;
> +
> + poke32(CRT_HORIZONTAL_TOTAL, temp);
> +
> + unsigned int a = (pModeParam->horizontal_sync_width <<
> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
> + unsigned int c = (pModeParam->horizontal_sync_start - 1) &
> + CRT_HORIZONTAL_SYNC_START_MASK;
> + unsigned int temp = b | c;
This is back to the original incorrect solution. You can't declare
variables on the fly in Linux code. Variables have to be declared at the
top of a block.
But you can reuse the same variables over and over, if no one cares about
their previous values.
julia
> +
> + poke32(CRT_HORIZONTAL_SYNC, temp);
> +
> + unsigned int a = (pModeParam->vertical_total - 1) <<
> + CRT_VERTICAL_TOTAL_TOTAL_SHIFT;
> + unsigned int b = a & CRT_VERTICAL_TOTAL_TOTAL_MASK;
> + unsigned int c = (pModeParam->vertical_display_end - 1) &
> + CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
> + unsigned int temp = b | c;
> +
> + poke32(CRT_VERTICAL_TOTAL, temp);
> +
> + unsigned int a = pModeParam->vertical_sync_height <<
> + CRT_VERTICAL_SYNC_HEIGHT_SHIFT;
> + unsigned int b = a & CRT_VERTICAL_SYNC_HEIGHT_MASK;
> + unsigned int c = (pModeParam->vertical_sync_start - 1) &
> + CRT_VERTICAL_SYNC_START_MASK;
> + unsigned int temp = b | c;
> +
> + poke32(CRT_VERTICAL_SYNC, temp);
>
> tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
> if (pModeParam->vertical_sync_polarity)
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170319130744.GA24605%40arushi-HP-Pavilion-Notebook.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
@ 2017-03-19 13:11 ` Julia Lawall
0 siblings, 0 replies; 10+ messages in thread
From: Julia Lawall @ 2017-03-19 13:11 UTC (permalink / raw)
To: Arushi Singhal
Cc: sudipm.mukherjee, Teddy Wang, Greg Kroah-Hartman, linux-fbdev,
devel, linux-kernel, outreachy-kernel
On Sun, 19 Mar 2017, Arushi Singhal wrote:
> New variables are added to make the code more readable.
>
> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
> ---
> changes in v3
> -try to make the code much more readable.
>
> drivers/staging/sm750fb/ddk750_mode.c | 61 ++++++++++++++++++++---------------
> 1 file changed, 35 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
> index eea5aef2956f..5f18ce4d10de 100644
> --- a/drivers/staging/sm750fb/ddk750_mode.c
> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *
> if (pll->clockType = SECONDARY_PLL) {
> /* programe secondary pixel clock */
> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
> - poke32(CRT_HORIZONTAL_TOTAL,
> - (((pModeParam->horizontal_total - 1) <<
> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->horizontal_display_end - 1) &
> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(CRT_HORIZONTAL_SYNC,
> - ((pModeParam->horizontal_sync_width <<
> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
> - ((pModeParam->horizontal_sync_start - 1) &
> - CRT_HORIZONTAL_SYNC_START_MASK));
>
> - poke32(CRT_VERTICAL_TOTAL,
> - (((pModeParam->vertical_total - 1) <<
> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
> - ((pModeParam->vertical_display_end - 1) &
> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
> -
> - poke32(CRT_VERTICAL_SYNC,
> - ((pModeParam->vertical_sync_height <<
> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
> - ((pModeParam->vertical_sync_start - 1) &
> - CRT_VERTICAL_SYNC_START_MASK));
> + unsigned int a = (pModeParam->horizontal_total - 1) <<
> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
> + unsigned int c = (pModeParam->horizontal_display_end - 1) &
> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> + unsigned int temp = b | c;
> +
> + poke32(CRT_HORIZONTAL_TOTAL, temp);
> +
> + unsigned int a = (pModeParam->horizontal_sync_width <<
> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
> + unsigned int c = (pModeParam->horizontal_sync_start - 1) &
> + CRT_HORIZONTAL_SYNC_START_MASK;
> + unsigned int temp = b | c;
This is back to the original incorrect solution. You can't declare
variables on the fly in Linux code. Variables have to be declared at the
top of a block.
But you can reuse the same variables over and over, if no one cares about
their previous values.
julia
> +
> + poke32(CRT_HORIZONTAL_SYNC, temp);
> +
> + unsigned int a = (pModeParam->vertical_total - 1) <<
> + CRT_VERTICAL_TOTAL_TOTAL_SHIFT;
> + unsigned int b = a & CRT_VERTICAL_TOTAL_TOTAL_MASK;
> + unsigned int c = (pModeParam->vertical_display_end - 1) &
> + CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
> + unsigned int temp = b | c;
> +
> + poke32(CRT_VERTICAL_TOTAL, temp);
> +
> + unsigned int a = pModeParam->vertical_sync_height <<
> + CRT_VERTICAL_SYNC_HEIGHT_SHIFT;
> + unsigned int b = a & CRT_VERTICAL_SYNC_HEIGHT_MASK;
> + unsigned int c = (pModeParam->vertical_sync_start - 1) &
> + CRT_VERTICAL_SYNC_START_MASK;
> + unsigned int temp = b | c;
> +
> + poke32(CRT_VERTICAL_SYNC, temp);
>
> tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
> if (pModeParam->vertical_sync_polarity)
> --
> 2.11.0
>
> --
> You received this message because you are subscribed to the Google Groups "outreachy-kernel" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to outreachy-kernel+unsubscribe@googlegroups.com.
> To post to this group, send email to outreachy-kernel@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/msgid/outreachy-kernel/20170319130744.GA24605%40arushi-HP-Pavilion-Notebook.
> For more options, visit https://groups.google.com/d/optout.
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3] staging: sm750fb: Code readability is improved
@ 2017-03-19 13:19 ` Arushi Singhal
0 siblings, 0 replies; 10+ messages in thread
From: Arushi Singhal @ 2017-03-19 13:19 UTC (permalink / raw)
To: sudipm.mukherjee
Cc: Teddy Wang, Greg Kroah-Hartman, linux-fbdev, devel, linux-kernel,
outreachy-kernel
New variables are added to make the code more readable.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
---
changes in v3
-try to make the code much more readable.
drivers/staging/sm750fb/ddk750_mode.c | 61 ++++++++++++++++++++---------------
1 file changed, 35 insertions(+), 26 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index eea5aef2956f..5f18ce4d10de 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *
if (pll->clockType = SECONDARY_PLL) {
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- poke32(CRT_HORIZONTAL_TOTAL,
- (((pModeParam->horizontal_total - 1) <<
- CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
- CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->horizontal_display_end - 1) &
- CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
-
- poke32(CRT_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
- CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
- CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
- CRT_HORIZONTAL_SYNC_START_MASK));
- poke32(CRT_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
- CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
- CRT_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
- CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
-
- poke32(CRT_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
- CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
- CRT_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
- CRT_VERTICAL_SYNC_START_MASK));
+ unsigned int a = (pModeParam->horizontal_total - 1) <<
+ CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
+ unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
+ unsigned int c = (pModeParam->horizontal_display_end - 1) &
+ CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_HORIZONTAL_TOTAL, temp);
+
+ unsigned int a = (pModeParam->horizontal_sync_width <<
+ CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
+ unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
+ unsigned int c = (pModeParam->horizontal_sync_start - 1) &
+ CRT_HORIZONTAL_SYNC_START_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_HORIZONTAL_SYNC, temp);
+
+ unsigned int a = (pModeParam->vertical_total - 1) <<
+ CRT_VERTICAL_TOTAL_TOTAL_SHIFT;
+ unsigned int b = a & CRT_VERTICAL_TOTAL_TOTAL_MASK;
+ unsigned int c = (pModeParam->vertical_display_end - 1) &
+ CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_VERTICAL_TOTAL, temp);
+
+ unsigned int a = pModeParam->vertical_sync_height <<
+ CRT_VERTICAL_SYNC_HEIGHT_SHIFT;
+ unsigned int b = a & CRT_VERTICAL_SYNC_HEIGHT_MASK;
+ unsigned int c = (pModeParam->vertical_sync_start - 1) &
+ CRT_VERTICAL_SYNC_START_MASK;
+ unsigned int temp = b | c;
+
+ poke32(CRT_VERTICAL_SYNC, temp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
if (pModeParam->vertical_sync_polarity)
--
2.11.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
2017-03-19 13:11 ` Julia Lawall
@ 2017-03-19 14:04 ` Geert Uytterhoeven
-1 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2017-03-19 14:04 UTC (permalink / raw)
To: Julia Lawall
Cc: Arushi Singhal, Sudip Mukherjee, Teddy Wang, Greg Kroah-Hartman,
Linux Fbdev development list, driverdevel, linux-kernel,
outreachy-kernel
On Sun, Mar 19, 2017 at 2:11 PM, Julia Lawall <julia.lawall@lip6.fr> wrote:
> On Sun, 19 Mar 2017, Arushi Singhal wrote:
>> New variables are added to make the code more readable.
>>
>> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
>> ---
>> changes in v3
>> -try to make the code much more readable.
>>
>> drivers/staging/sm750fb/ddk750_mode.c | 61 ++++++++++++++++++++---------------
>> 1 file changed, 35 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
>> index eea5aef2956f..5f18ce4d10de 100644
>> --- a/drivers/staging/sm750fb/ddk750_mode.c
>> +++ b/drivers/staging/sm750fb/ddk750_mode.c
>> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *
>> if (pll->clockType == SECONDARY_PLL) {
>> /* programe secondary pixel clock */
>> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
>> - poke32(CRT_HORIZONTAL_TOTAL,
>> - (((pModeParam->horizontal_total - 1) <<
>> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
>> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
>> - ((pModeParam->horizontal_display_end - 1) &
>> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
>> -
>> - poke32(CRT_HORIZONTAL_SYNC,
>> - ((pModeParam->horizontal_sync_width <<
>> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
>> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
>> - ((pModeParam->horizontal_sync_start - 1) &
>> - CRT_HORIZONTAL_SYNC_START_MASK));
>>
>> - poke32(CRT_VERTICAL_TOTAL,
>> - (((pModeParam->vertical_total - 1) <<
>> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
>> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
>> - ((pModeParam->vertical_display_end - 1) &
>> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
>> -
>> - poke32(CRT_VERTICAL_SYNC,
>> - ((pModeParam->vertical_sync_height <<
>> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
>> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
>> - ((pModeParam->vertical_sync_start - 1) &
>> - CRT_VERTICAL_SYNC_START_MASK));
>> + unsigned int a = (pModeParam->horizontal_total - 1) <<
>> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
>> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
>> + unsigned int c = (pModeParam->horizontal_display_end - 1) &
>> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
>> + unsigned int temp = b | c;
>> +
>> + poke32(CRT_HORIZONTAL_TOTAL, temp);
>> +
>> + unsigned int a = (pModeParam->horizontal_sync_width <<
>> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
>> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
>> + unsigned int c = (pModeParam->horizontal_sync_start - 1) &
>> + CRT_HORIZONTAL_SYNC_START_MASK;
>> + unsigned int temp = b | c;
>
> This is back to the original incorrect solution. You can't declare
> variables on the fly in Linux code. Variables have to be declared at the
> top of a block.
Arushi: have you tried to compile this?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
@ 2017-03-19 14:04 ` Geert Uytterhoeven
0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2017-03-19 14:04 UTC (permalink / raw)
To: Julia Lawall
Cc: Arushi Singhal, Sudip Mukherjee, Teddy Wang, Greg Kroah-Hartman,
Linux Fbdev development list, driverdevel, linux-kernel,
outreachy-kernel
On Sun, Mar 19, 2017 at 2:11 PM, Julia Lawall <julia.lawall@lip6.fr> wrote:
> On Sun, 19 Mar 2017, Arushi Singhal wrote:
>> New variables are added to make the code more readable.
>>
>> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
>> ---
>> changes in v3
>> -try to make the code much more readable.
>>
>> drivers/staging/sm750fb/ddk750_mode.c | 61 ++++++++++++++++++++---------------
>> 1 file changed, 35 insertions(+), 26 deletions(-)
>>
>> diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
>> index eea5aef2956f..5f18ce4d10de 100644
>> --- a/drivers/staging/sm750fb/ddk750_mode.c
>> +++ b/drivers/staging/sm750fb/ddk750_mode.c
>> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t *pModeParam, struct pll_value *
>> if (pll->clockType = SECONDARY_PLL) {
>> /* programe secondary pixel clock */
>> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
>> - poke32(CRT_HORIZONTAL_TOTAL,
>> - (((pModeParam->horizontal_total - 1) <<
>> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
>> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
>> - ((pModeParam->horizontal_display_end - 1) &
>> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
>> -
>> - poke32(CRT_HORIZONTAL_SYNC,
>> - ((pModeParam->horizontal_sync_width <<
>> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
>> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
>> - ((pModeParam->horizontal_sync_start - 1) &
>> - CRT_HORIZONTAL_SYNC_START_MASK));
>>
>> - poke32(CRT_VERTICAL_TOTAL,
>> - (((pModeParam->vertical_total - 1) <<
>> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
>> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
>> - ((pModeParam->vertical_display_end - 1) &
>> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
>> -
>> - poke32(CRT_VERTICAL_SYNC,
>> - ((pModeParam->vertical_sync_height <<
>> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
>> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
>> - ((pModeParam->vertical_sync_start - 1) &
>> - CRT_VERTICAL_SYNC_START_MASK));
>> + unsigned int a = (pModeParam->horizontal_total - 1) <<
>> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
>> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
>> + unsigned int c = (pModeParam->horizontal_display_end - 1) &
>> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
>> + unsigned int temp = b | c;
>> +
>> + poke32(CRT_HORIZONTAL_TOTAL, temp);
>> +
>> + unsigned int a = (pModeParam->horizontal_sync_width <<
>> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
>> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
>> + unsigned int c = (pModeParam->horizontal_sync_start - 1) &
>> + CRT_HORIZONTAL_SYNC_START_MASK;
>> + unsigned int temp = b | c;
>
> This is back to the original incorrect solution. You can't declare
> variables on the fly in Linux code. Variables have to be declared at the
> top of a block.
Arushi: have you tried to compile this?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
2017-03-19 14:04 ` Geert Uytterhoeven
(?)
@ 2017-03-19 15:52 ` Arushi Singhal
2017-03-19 16:05 ` Geert Uytterhoeven
-1 siblings, 1 reply; 10+ messages in thread
From: Arushi Singhal @ 2017-03-19 15:52 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Julia Lawall, Sudip Mukherjee, Teddy Wang, Greg Kroah-Hartman,
Linux Fbdev development list, driverdevel, linux-kernel,
outreachy-kernel
[-- Attachment #1: Type: text/plain, Size: 4146 bytes --]
On Sun, Mar 19, 2017 at 7:34 PM, Geert Uytterhoeven <geert@linux-m68k.org>
wrote:
> On Sun, Mar 19, 2017 at 2:11 PM, Julia Lawall <julia.lawall@lip6.fr>
> wrote:
> > On Sun, 19 Mar 2017, Arushi Singhal wrote:
> >> New variables are added to make the code more readable.
> >>
> >> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
> >> ---
> >> changes in v3
> >> -try to make the code much more readable.
> >>
> >> drivers/staging/sm750fb/ddk750_mode.c | 61
> ++++++++++++++++++++---------------
> >> 1 file changed, 35 insertions(+), 26 deletions(-)
> >>
> >> diff --git a/drivers/staging/sm750fb/ddk750_mode.c
> b/drivers/staging/sm750fb/ddk750_mode.c
> >> index eea5aef2956f..5f18ce4d10de 100644
> >> --- a/drivers/staging/sm750fb/ddk750_mode.c
> >> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> >> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t
> *pModeParam, struct pll_value *
> >> if (pll->clockType == SECONDARY_PLL) {
> >> /* programe secondary pixel clock */
> >> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
> >> - poke32(CRT_HORIZONTAL_TOTAL,
> >> - (((pModeParam->horizontal_total - 1) <<
> >> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> >> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
> >> - ((pModeParam->horizontal_display_end - 1) &
> >> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
> >> -
> >> - poke32(CRT_HORIZONTAL_SYNC,
> >> - ((pModeParam->horizontal_sync_width <<
> >> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> >> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
> >> - ((pModeParam->horizontal_sync_start - 1) &
> >> - CRT_HORIZONTAL_SYNC_START_MASK));
> >>
> >> - poke32(CRT_VERTICAL_TOTAL,
> >> - (((pModeParam->vertical_total - 1) <<
> >> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
> >> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
> >> - ((pModeParam->vertical_display_end - 1) &
> >> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
> >> -
> >> - poke32(CRT_VERTICAL_SYNC,
> >> - ((pModeParam->vertical_sync_height <<
> >> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
> >> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
> >> - ((pModeParam->vertical_sync_start - 1) &
> >> - CRT_VERTICAL_SYNC_START_MASK));
> >> + unsigned int a = (pModeParam->horizontal_total - 1) <<
> >> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
> >> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
> >> + unsigned int c = (pModeParam->horizontal_display_end -
> 1) &
> >> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> >> + unsigned int temp = b | c;
> >> +
> >> + poke32(CRT_HORIZONTAL_TOTAL, temp);
> >> +
> >> + unsigned int a = (pModeParam->horizontal_sync_width <<
> >> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
> >> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
> >> + unsigned int c = (pModeParam->horizontal_sync_start - 1)
> &
> >> + CRT_HORIZONTAL_SYNC_START_MASK;
> >> + unsigned int temp = b | c;
> >
> > This is back to the original incorrect solution. You can't declare
> > variables on the fly in Linux code. Variables have to be declared at the
> > top of a block.
>
> Arushi: have you tried to compile this?
>
Yes.
It's not showing any error.
Is it not fine when you compiled :( ?
Arushi
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
> geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker.
> But
> when I'm talking to journalists I just say "programmer" or something like
> that.
> -- Linus Torvalds
>
[-- Attachment #2: Type: text/html, Size: 6146 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
2017-03-19 15:52 ` Arushi Singhal
@ 2017-03-19 16:05 ` Geert Uytterhoeven
0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2017-03-19 16:05 UTC (permalink / raw)
To: Arushi Singhal
Cc: Julia Lawall, Sudip Mukherjee, Teddy Wang, Greg Kroah-Hartman,
Linux Fbdev development list, driverdevel, linux-kernel,
outreachy-kernel
On Sun, Mar 19, 2017 at 4:52 PM, Arushi Singhal
<arushisinghal19971997@gmail.com> wrote:
> On Sun, Mar 19, 2017 at 7:34 PM, Geert Uytterhoeven <geert@linux-m68k.org>
> wrote:
>>
>> On Sun, Mar 19, 2017 at 2:11 PM, Julia Lawall <julia.lawall@lip6.fr>
>> wrote:
>> > On Sun, 19 Mar 2017, Arushi Singhal wrote:
>> >> New variables are added to make the code more readable.
>> >>
>> >> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
>> >> ---
>> >> changes in v3
>> >> -try to make the code much more readable.
>> >>
>> >> drivers/staging/sm750fb/ddk750_mode.c | 61
>> >> ++++++++++++++++++++---------------
>> >> 1 file changed, 35 insertions(+), 26 deletions(-)
>> >>
>> >> diff --git a/drivers/staging/sm750fb/ddk750_mode.c
>> >> b/drivers/staging/sm750fb/ddk750_mode.c
>> >> index eea5aef2956f..5f18ce4d10de 100644
>> >> --- a/drivers/staging/sm750fb/ddk750_mode.c
>> >> +++ b/drivers/staging/sm750fb/ddk750_mode.c
>> >> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t
>> >> *pModeParam, struct pll_value *
>> >> if (pll->clockType == SECONDARY_PLL) {
>> >> /* programe secondary pixel clock */
>> >> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
>> >> - poke32(CRT_HORIZONTAL_TOTAL,
>> >> - (((pModeParam->horizontal_total - 1) <<
>> >> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
>> >> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
>> >> - ((pModeParam->horizontal_display_end - 1) &
>> >> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
>> >> -
>> >> - poke32(CRT_HORIZONTAL_SYNC,
>> >> - ((pModeParam->horizontal_sync_width <<
>> >> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
>> >> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
>> >> - ((pModeParam->horizontal_sync_start - 1) &
>> >> - CRT_HORIZONTAL_SYNC_START_MASK));
>> >>
>> >> - poke32(CRT_VERTICAL_TOTAL,
>> >> - (((pModeParam->vertical_total - 1) <<
>> >> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
>> >> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
>> >> - ((pModeParam->vertical_display_end - 1) &
>> >> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
>> >> -
>> >> - poke32(CRT_VERTICAL_SYNC,
>> >> - ((pModeParam->vertical_sync_height <<
>> >> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
>> >> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
>> >> - ((pModeParam->vertical_sync_start - 1) &
>> >> - CRT_VERTICAL_SYNC_START_MASK));
>> >> + unsigned int a = (pModeParam->horizontal_total - 1) <<
>> >> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
>> >> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
>> >> + unsigned int c = (pModeParam->horizontal_display_end - 1)
>> >> &
>> >> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
>> >> + unsigned int temp = b | c;
>> >> +
>> >> + poke32(CRT_HORIZONTAL_TOTAL, temp);
>> >> +
>> >> + unsigned int a = (pModeParam->horizontal_sync_width <<
>> >> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
>> >> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
>> >> + unsigned int c = (pModeParam->horizontal_sync_start - 1)
>> >> &
>> >> + CRT_HORIZONTAL_SYNC_START_MASK;
>> >> + unsigned int temp = b | c;
>> >
>> > This is back to the original incorrect solution. You can't declare
>> > variables on the fly in Linux code. Variables have to be declared at
>> > the
>> > top of a block.
>>
>> Arushi: have you tried to compile this?
>
> Yes.
> It's not showing any error.
No, not an error.
> Is it not fine when you compiled :( ?
But you did introduce warnings, like:
drivers/staging/sm750fb/ddk750_mode.c: In function 'programModeRegisters':
drivers/staging/sm750fb/ddk750_mode.c:87:3: warning: ISO C90 forbids
mixed declarations and code [-Wdeclaration-after-statement]
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
@ 2017-03-19 16:05 ` Geert Uytterhoeven
0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2017-03-19 16:05 UTC (permalink / raw)
To: Arushi Singhal
Cc: Julia Lawall, Sudip Mukherjee, Teddy Wang, Greg Kroah-Hartman,
Linux Fbdev development list, driverdevel, linux-kernel,
outreachy-kernel
On Sun, Mar 19, 2017 at 4:52 PM, Arushi Singhal
<arushisinghal19971997@gmail.com> wrote:
> On Sun, Mar 19, 2017 at 7:34 PM, Geert Uytterhoeven <geert@linux-m68k.org>
> wrote:
>>
>> On Sun, Mar 19, 2017 at 2:11 PM, Julia Lawall <julia.lawall@lip6.fr>
>> wrote:
>> > On Sun, 19 Mar 2017, Arushi Singhal wrote:
>> >> New variables are added to make the code more readable.
>> >>
>> >> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
>> >> ---
>> >> changes in v3
>> >> -try to make the code much more readable.
>> >>
>> >> drivers/staging/sm750fb/ddk750_mode.c | 61
>> >> ++++++++++++++++++++---------------
>> >> 1 file changed, 35 insertions(+), 26 deletions(-)
>> >>
>> >> diff --git a/drivers/staging/sm750fb/ddk750_mode.c
>> >> b/drivers/staging/sm750fb/ddk750_mode.c
>> >> index eea5aef2956f..5f18ce4d10de 100644
>> >> --- a/drivers/staging/sm750fb/ddk750_mode.c
>> >> +++ b/drivers/staging/sm750fb/ddk750_mode.c
>> >> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t
>> >> *pModeParam, struct pll_value *
>> >> if (pll->clockType = SECONDARY_PLL) {
>> >> /* programe secondary pixel clock */
>> >> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
>> >> - poke32(CRT_HORIZONTAL_TOTAL,
>> >> - (((pModeParam->horizontal_total - 1) <<
>> >> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
>> >> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
>> >> - ((pModeParam->horizontal_display_end - 1) &
>> >> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
>> >> -
>> >> - poke32(CRT_HORIZONTAL_SYNC,
>> >> - ((pModeParam->horizontal_sync_width <<
>> >> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
>> >> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
>> >> - ((pModeParam->horizontal_sync_start - 1) &
>> >> - CRT_HORIZONTAL_SYNC_START_MASK));
>> >>
>> >> - poke32(CRT_VERTICAL_TOTAL,
>> >> - (((pModeParam->vertical_total - 1) <<
>> >> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
>> >> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
>> >> - ((pModeParam->vertical_display_end - 1) &
>> >> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
>> >> -
>> >> - poke32(CRT_VERTICAL_SYNC,
>> >> - ((pModeParam->vertical_sync_height <<
>> >> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
>> >> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
>> >> - ((pModeParam->vertical_sync_start - 1) &
>> >> - CRT_VERTICAL_SYNC_START_MASK));
>> >> + unsigned int a = (pModeParam->horizontal_total - 1) <<
>> >> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
>> >> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
>> >> + unsigned int c = (pModeParam->horizontal_display_end - 1)
>> >> &
>> >> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
>> >> + unsigned int temp = b | c;
>> >> +
>> >> + poke32(CRT_HORIZONTAL_TOTAL, temp);
>> >> +
>> >> + unsigned int a = (pModeParam->horizontal_sync_width <<
>> >> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
>> >> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
>> >> + unsigned int c = (pModeParam->horizontal_sync_start - 1)
>> >> &
>> >> + CRT_HORIZONTAL_SYNC_START_MASK;
>> >> + unsigned int temp = b | c;
>> >
>> > This is back to the original incorrect solution. You can't declare
>> > variables on the fly in Linux code. Variables have to be declared at
>> > the
>> > top of a block.
>>
>> Arushi: have you tried to compile this?
>
> Yes.
> It's not showing any error.
No, not an error.
> Is it not fine when you compiled :( ?
But you did introduce warnings, like:
drivers/staging/sm750fb/ddk750_mode.c: In function 'programModeRegisters':
drivers/staging/sm750fb/ddk750_mode.c:87:3: warning: ISO C90 forbids
mixed declarations and code [-Wdeclaration-after-statement]
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Outreachy kernel] [PATCH v3] staging: sm750fb: Code readability is improved
2017-03-19 16:05 ` Geert Uytterhoeven
(?)
@ 2017-03-19 16:20 ` Arushi Singhal
-1 siblings, 0 replies; 10+ messages in thread
From: Arushi Singhal @ 2017-03-19 16:20 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Julia Lawall, Sudip Mukherjee, Teddy Wang, Greg Kroah-Hartman,
Linux Fbdev development list, driverdevel, linux-kernel,
outreachy-kernel
[-- Attachment #1: Type: text/plain, Size: 4883 bytes --]
On Sun, Mar 19, 2017 at 9:35 PM, Geert Uytterhoeven <geert@linux-m68k.org>
wrote:
> On Sun, Mar 19, 2017 at 4:52 PM, Arushi Singhal
> <arushisinghal19971997@gmail.com> wrote:
> > On Sun, Mar 19, 2017 at 7:34 PM, Geert Uytterhoeven <
> geert@linux-m68k.org>
> > wrote:
> >>
> >> On Sun, Mar 19, 2017 at 2:11 PM, Julia Lawall <julia.lawall@lip6.fr>
> >> wrote:
> >> > On Sun, 19 Mar 2017, Arushi Singhal wrote:
> >> >> New variables are added to make the code more readable.
> >> >>
> >> >> Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
> >> >> ---
> >> >> changes in v3
> >> >> -try to make the code much more readable.
> >> >>
> >> >> drivers/staging/sm750fb/ddk750_mode.c | 61
> >> >> ++++++++++++++++++++---------------
> >> >> 1 file changed, 35 insertions(+), 26 deletions(-)
> >> >>
> >> >> diff --git a/drivers/staging/sm750fb/ddk750_mode.c
> >> >> b/drivers/staging/sm750fb/ddk750_mode.c
> >> >> index eea5aef2956f..5f18ce4d10de 100644
> >> >> --- a/drivers/staging/sm750fb/ddk750_mode.c
> >> >> +++ b/drivers/staging/sm750fb/ddk750_mode.c
> >> >> @@ -81,33 +81,42 @@ static int programModeRegisters(mode_parameter_t
> >> >> *pModeParam, struct pll_value *
> >> >> if (pll->clockType == SECONDARY_PLL) {
> >> >> /* programe secondary pixel clock */
> >> >> poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
> >> >> - poke32(CRT_HORIZONTAL_TOTAL,
> >> >> - (((pModeParam->horizontal_total - 1) <<
> >> >> - CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
> >> >> - CRT_HORIZONTAL_TOTAL_TOTAL_MASK) |
> >> >> - ((pModeParam->horizontal_display_end - 1) &
> >> >> - CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK));
> >> >> -
> >> >> - poke32(CRT_HORIZONTAL_SYNC,
> >> >> - ((pModeParam->horizontal_sync_width <<
> >> >> - CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
> >> >> - CRT_HORIZONTAL_SYNC_WIDTH_MASK) |
> >> >> - ((pModeParam->horizontal_sync_start - 1) &
> >> >> - CRT_HORIZONTAL_SYNC_START_MASK));
> >> >>
> >> >> - poke32(CRT_VERTICAL_TOTAL,
> >> >> - (((pModeParam->vertical_total - 1) <<
> >> >> - CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
> >> >> - CRT_VERTICAL_TOTAL_TOTAL_MASK) |
> >> >> - ((pModeParam->vertical_display_end - 1) &
> >> >> - CRT_VERTICAL_TOTAL_DISPLAY_END_MASK));
> >> >> -
> >> >> - poke32(CRT_VERTICAL_SYNC,
> >> >> - ((pModeParam->vertical_sync_height <<
> >> >> - CRT_VERTICAL_SYNC_HEIGHT_SHIFT) &
> >> >> - CRT_VERTICAL_SYNC_HEIGHT_MASK) |
> >> >> - ((pModeParam->vertical_sync_start - 1) &
> >> >> - CRT_VERTICAL_SYNC_START_MASK));
> >> >> + unsigned int a = (pModeParam->horizontal_total - 1) <<
> >> >> + CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT;
> >> >> + unsigned int b = a & CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
> >> >> + unsigned int c = (pModeParam->horizontal_display_end
> - 1)
> >> >> &
> >> >> + CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
> >> >> + unsigned int temp = b | c;
> >> >> +
> >> >> + poke32(CRT_HORIZONTAL_TOTAL, temp);
> >> >> +
> >> >> + unsigned int a = (pModeParam->horizontal_sync_width <<
> >> >> + CRT_HORIZONTAL_SYNC_WIDTH_SHIFT);
> >> >> + unsigned int b = a & CRT_HORIZONTAL_SYNC_WIDTH_MASK;
> >> >> + unsigned int c = (pModeParam->horizontal_sync_start -
> 1)
> >> >> &
> >> >> + CRT_HORIZONTAL_SYNC_START_MASK;
> >> >> + unsigned int temp = b | c;
> >> >
> >> > This is back to the original incorrect solution. You can't declare
> >> > variables on the fly in Linux code. Variables have to be declared at
> >> > the
> >> > top of a block.
> >>
> >> Arushi: have you tried to compile this?
> >
> > Yes.
> > It's not showing any error.
>
> No, not an error.
>
> > Is it not fine when you compiled :( ?
>
> But you did introduce warnings, like:
>
>
drivers/staging/sm750fb/ddk750_mode.c: In function 'programModeRegisters':
> drivers/staging/sm750fb/ddk750_mode.c:87:3: warning: ISO C90 forbids
> mixed declarations and code [-Wdeclaration-after-statement]
>
> No
Arushi
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
> geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker.
> But
> when I'm talking to journalists I just say "programmer" or something like
> that.
> -- Linus Torvalds
>
[-- Attachment #2: Type: text/html, Size: 7816 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2017-03-19 16:20 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-19 13:07 [PATCH v3] staging: sm750fb: Code readability is improved Arushi Singhal
2017-03-19 13:19 ` Arushi Singhal
2017-03-19 13:11 ` [Outreachy kernel] " Julia Lawall
2017-03-19 13:11 ` Julia Lawall
2017-03-19 14:04 ` Geert Uytterhoeven
2017-03-19 14:04 ` Geert Uytterhoeven
2017-03-19 15:52 ` Arushi Singhal
2017-03-19 16:05 ` Geert Uytterhoeven
2017-03-19 16:05 ` Geert Uytterhoeven
2017-03-19 16:20 ` Arushi Singhal
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.