* [GIT PULL] dmaengine/async_tx update for 2.6.35
@ 2010-05-19 22:28 Dan Williams
2010-05-21 23:20 ` Dan Williams
0 siblings, 1 reply; 3+ messages in thread
From: Dan Williams @ 2010-05-19 22:28 UTC (permalink / raw)
To: Linus Torvalds, Andrew Morton; +Cc: linux-kernel
Hi Linus, please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx.git next
...to receive:
1/ Two new dma drivers ste_dma40 and timb_dma.
2/ A rework of the existing channel-status and channel-control api's to
make them more generic/extensible. Hence the touch-ups to existing dma
drivers and the excursions into drivers/video/, drivers/serial/, and
sound/.
3/ An update to the ioat driver to allow descriptor submission to run
unlocked against descriptor cleanup.
4/ Other cleanups and fixes
There is one more driver to submit, but it depended on the merge of the
ARM tree and will be sent separately. As you can see below there were a
few late patches, but they have seen at least one -next release.
Thanks,
Dan
Dan Williams (6):
dmaengine: provide helper for setting txstate
ioat: convert to circ_buf
ioat2,3: convert to producer/consumer locking
ioat3: disable cacheline-unaligned transfers for raid operations
async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
Merge branch 'ioat' into dmaengine
Jassi Brar (1):
DMA ENGINE: Do not reset 'private' of channel
Jonas Aaberg (1):
DMAENGINE: DMA40 support paused channel status
Linus Walleij (6):
DMAENGINE: COH 901 318 rename confusing vars
DMAENGINE: COH 901 318 fix bytesleft
DMAENGINE: generic slave control v2
DMAENGINE: generic channel status v2
DMAENGINE: Support for ST-Ericssons DMA40 block v3
DMAENGINE: extend the control command to include an arg
Marcin Mielczarczyk (1):
DMAENGINE: DMA40 fix for allocation of logical channel 0
Minskey Guo (1):
ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
Richard Röjfors (2):
dma: Add timb-dma
dma: timb-dma: Update comment and fix compiler warning
Stephen Rothwell (1):
async_tx: use of kzalloc/kfree requires the include of slab.h
Tobias Klauser (1):
dmaengine: mpc512x: Use resource_size
arch/arm/mach-u300/include/mach/coh901318.h | 21 -
arch/arm/plat-nomadik/include/plat/ste_dma40.h | 239 +++
crypto/async_tx/async_tx.c | 46 +-
drivers/dma/Kconfig | 14 +
drivers/dma/Makefile | 2 +
drivers/dma/at_hdmac.c | 35 +-
drivers/dma/coh901318.c | 263 ++-
drivers/dma/dmaengine.c | 22 +-
drivers/dma/dw_dmac.c | 24 +-
drivers/dma/fsldma.c | 28 +-
drivers/dma/ioat/dma.c | 12 +-
drivers/dma/ioat/dma.h | 19 +-
drivers/dma/ioat/dma_v2.c | 186 +-
drivers/dma/ioat/dma_v2.h | 33 +-
drivers/dma/ioat/dma_v3.c | 143 +-
drivers/dma/ioat/pci.c | 7 +-
drivers/dma/iop-adma.c | 39 +-
drivers/dma/ipu/ipu_idmac.c | 34 +-
drivers/dma/mpc512x_dma.c | 15 +-
drivers/dma/mv_xor.c | 25 +-
drivers/dma/ppc4xx/adma.c | 19 +-
drivers/dma/shdma.c | 27 +-
drivers/dma/ste_dma40.c | 2657 ++++++++++++++++++++++++
drivers/dma/ste_dma40_ll.c | 454 ++++
drivers/dma/ste_dma40_ll.h | 354 ++++
drivers/dma/timb_dma.c | 860 ++++++++
drivers/dma/txx9dmac.c | 23 +-
drivers/mmc/host/atmel-mci.c | 2 +-
drivers/serial/sh-sci.c | 2 +-
drivers/video/mx3fb.c | 3 +-
include/linux/dmaengine.h | 127 ++-
include/linux/timb_dma.h | 55 +
sound/soc/txx9/txx9aclc.c | 7 +-
33 files changed, 5286 insertions(+), 511 deletions(-)
create mode 100644 arch/arm/plat-nomadik/include/plat/ste_dma40.h
create mode 100644 drivers/dma/ste_dma40.c
create mode 100644 drivers/dma/ste_dma40_ll.c
create mode 100644 drivers/dma/ste_dma40_ll.h
create mode 100644 drivers/dma/timb_dma.c
create mode 100644 include/linux/timb_dma.h
commit 0b28330e39bbe0ffee4c56b09fc415fcec595ea3
Merge: 0582763 caa20d97
Author: Dan Williams <dan.j.williams@intel.com>
Date: Mon May 17 16:30:58 2010 -0700
Merge branch 'ioat' into dmaengine
commit 058276303dbc4ed089c1f7dad0871810b1f5ddf1
Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon May 17 16:30:42 2010 -0700
DMAENGINE: extend the control command to include an arg
This adds an argument to the DMAengine control function, so that
we can later provide control commands that need some external data
passed in through an argument akin to the ioctl() operation
prototype.
[dan.j.williams@intel.com: fix up some missed conversions]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit caa20d974c86af496b419eef70010e63b7fab7ac
Author: Dan Williams <dan.j.williams@intel.com>
Date: Mon May 17 16:24:16 2010 -0700
async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
Saves 24 bytes per descriptor (64-bit) when the channel-switching
capabilities of async_tx are not required.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 4aed79b2818e7330b5d00143e4c20bc6555df91f
Author: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Date: Tue May 18 00:41:21 2010 +0200
DMAENGINE: DMA40 fix for allocation of logical channel 0
Fix for allocation failure of logical channel when event line
happens to be number 0.
Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit a5ebca4769f28ceade28ff59fcbffb8e184e599c
Author: Jonas Aaberg <jonas.aberg@stericsson.com>
Date: Tue May 18 00:41:09 2010 +0200
DMAENGINE: DMA40 support paused channel status
Support determining whether a channel is paused or
not using the status function.
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 8381fc35244dbdf58cfc49e04e0d7c3498c8aa03
Author: Tobias Klauser <tklauser@distanz.ch>
Date: Thu May 6 11:58:55 2010 +0200
dmaengine: mpc512x: Use resource_size
Use the resource_size function instead of manually calculating the
resource size. This reduces the chance of introducing off-by-one
errors.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit cc05ea0cd63437da2033b3ce6e033b1f1aaaf640
Author: Jassi Brar <jassi.brar@samsung.com>
Date: Tue May 4 18:22:15 2010 +0900
DMA ENGINE: Do not reset 'private' of channel
The member 'private' of 'struct dma_chan' is meant for passing
data between client and the controller driver.
The DMA client driver may point it to platform specific stuff after
acquiring the channel. So, it is the responsiblity of the same code
to reset it, if it must.
The DMA engine doesn't set it and hence, shouldn't reset it either.
This reseting of private by DMA Engine comes in the way of implementing
default channel settings during DMAC probe. That capability is useful
for not having the clients to always provide platform specific data,
like Rx/Tx FIFO addresses, which usually doesn't change across channel
requests.
Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit c86e1401c9f2ba8d989fa1c4b33d0f0ec3ba8aaf
Author: Minskey Guo <chaohong_guo@linux.intel.com>
Date: Sun May 2 12:52:35 2010 -0700
ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
The memory for ioatdma_device structure is being allocated in
alloc_ioatdma()
Signed-off-by: Minskey Guo <chaohong_guo@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 2adfc550b6d9646301c810643bc309fa49375987
Author: Dan Williams <dan.j.williams@intel.com>
Date: Sat May 1 15:22:56 2010 -0700
ioat3: disable cacheline-unaligned transfers for raid operations
There are cases where cacheline-unaligned raid operations can hang the
dma channel. Simply disable these operations by increasing the
alignment constraints published to async_tx. The raid456 driver always
issues page aligned requests, so the only in-kernel user of the ioatdma
driver that is affected by this change is dmatest.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 074cc47679f8b0931d7d5384e95822d82768f149
Author: Dan Williams <dan.j.williams@intel.com>
Date: Sat May 1 15:22:55 2010 -0700
ioat2,3: convert to producer/consumer locking
Use separate locks for the descriptor prep (producer) and descriptor
cleanup (consumer) paths. Allows the producer path to run concurrently
with the cleanup path. Inspired by Documentation/circular-buffer.txt.
Cc: David Howells <dhowells@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit abb12dfd50c7580d7dcbd581cf6265ba4d01ea7e
Author: Dan Williams <dan.j.williams@intel.com>
Date: Sat May 1 15:22:54 2010 -0700
ioat: convert to circ_buf
Use the common power-of-2 circular buffer macros.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 8d318a50b3d72e3daf94131f91e1ab799a8d5ad4
Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue Mar 30 15:33:42 2010 +0200
DMAENGINE: Support for ST-Ericssons DMA40 block v3
This is a straightforward driver for the ST-Ericsson DMA40 DMA
controller found in U8500, implemented akin to the existing
COH 901 318 driver.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com>
Cc: STEricsson_nomadik_linux@list.st.com
Cc: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 6a3cd3ea48584d14f60dce0b3c4e9e4428beb0fe
Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon Mar 29 15:54:40 2010 +1100
async_tx: use of kzalloc/kfree requires the include of slab.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit bca3469205402d9fb14060d255d8786ae2256640
Author: Dan Williams <dan.j.williams@intel.com>
Date: Fri Mar 26 16:52:10 2010 -0700
dmaengine: provide helper for setting txstate
Simple conditional struct filler to cut out some duplicated code.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 0793448187643b50af89d36b08470baf45a3cab4
Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Fri Mar 26 16:50:49 2010 -0700
DMAENGINE: generic channel status v2
Convert the device_is_tx_complete() operation on the
DMA engine to a generic device_tx_status()operation which
can return three states, DMA_TX_RUNNING, DMA_TX_COMPLETE,
DMA_TX_PAUSED.
[dan.j.williams@intel.com: update for timberdale]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Li Yang <leoli@freescale.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit c3635c78e500a52c9fcd55de381a72928d9e054d
Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Fri Mar 26 16:44:01 2010 -0700
DMAENGINE: generic slave control v2
Convert the device_terminate_all() operation on the
DMA engine to a generic device_control() operation
which can now optionally support also pausing and
resuming DMA on a certain channel. Implemented for the
COH 901 318 DMAC as an example.
[dan.j.williams@intel.com: update for timberdale]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Li Yang <leoli@freescale.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: Magnus Damm <damm@opensource.se>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 0f65169b1bf44220308e1ce1f6666ad03ddc27af
Author: Richard Röjfors <richard.rojfors@pelagicore.com>
Date: Fri Mar 26 08:23:58 2010 +0100
dma: timb-dma: Update comment and fix compiler warning
An incremental patch which clarifies what the spinlock is used for
and fixes a compiler warning.
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit de5d4453c5b224eefd02b6a141ed411a76d458af
Author: Richard Röjfors <richard.rojfors@pelagicore.com>
Date: Thu Mar 25 19:44:21 2010 +0100
dma: Add timb-dma
Adds the support for the DMA engine withing the timberdale FPGA.
The DMA channels are strict device to host, or host to device
and can not be used for generic memcpy.
Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit 84c8447c544bc7579097649273bc3f4e1b5de6af
Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu Mar 4 14:40:30 2010 +0100
DMAENGINE: COH 901 318 fix bytesleft
This makes the function to get the number of bytes left in the
ongoing DMA transaction actually work: the old code did not take
neither lli:s nor queued jobs into account. Also fix a missing
spinlock while we're at it.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
commit cecd87da83869ad4157295b87a2e51e38c3e03bf
Author: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu Mar 4 14:31:47 2010 +0100
DMAENGINE: COH 901 318 rename confusing vars
This fixes up the code with a lot of comments that make it readable,
rename things with opaque names like "data" into something more
appropriate, and remove some very confusing BUG() statements.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [GIT PULL] dmaengine/async_tx update for 2.6.35
2010-05-19 22:28 [GIT PULL] dmaengine/async_tx update for 2.6.35 Dan Williams
@ 2010-05-21 23:20 ` Dan Williams
2010-05-22 0:07 ` Linus Torvalds
0 siblings, 1 reply; 3+ messages in thread
From: Dan Williams @ 2010-05-21 23:20 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Andrew Morton, linux-kernel
On Wed, 2010-05-19 at 15:28 -0700, Dan Williams wrote:
> Hi Linus, please pull from:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx.git next
>
> ...to receive:
I think this got overlooked (other pull requests from later in the week
have gone in).
Thanks,
Dan
>
> 1/ Two new dma drivers ste_dma40 and timb_dma.
> 2/ A rework of the existing channel-status and channel-control api's to
> make them more generic/extensible. Hence the touch-ups to existing dma
> drivers and the excursions into drivers/video/, drivers/serial/, and
> sound/.
> 3/ An update to the ioat driver to allow descriptor submission to run
> unlocked against descriptor cleanup.
> 4/ Other cleanups and fixes
>
> There is one more driver to submit, but it depended on the merge of the
> ARM tree and will be sent separately. As you can see below there were a
> few late patches, but they have seen at least one -next release.
>
> Thanks,
> Dan
>
> Dan Williams (6):
> dmaengine: provide helper for setting txstate
> ioat: convert to circ_buf
> ioat2,3: convert to producer/consumer locking
> ioat3: disable cacheline-unaligned transfers for raid operations
> async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
> Merge branch 'ioat' into dmaengine
>
> Jassi Brar (1):
> DMA ENGINE: Do not reset 'private' of channel
>
> Jonas Aaberg (1):
> DMAENGINE: DMA40 support paused channel status
>
> Linus Walleij (6):
> DMAENGINE: COH 901 318 rename confusing vars
> DMAENGINE: COH 901 318 fix bytesleft
> DMAENGINE: generic slave control v2
> DMAENGINE: generic channel status v2
> DMAENGINE: Support for ST-Ericssons DMA40 block v3
> DMAENGINE: extend the control command to include an arg
>
> Marcin Mielczarczyk (1):
> DMAENGINE: DMA40 fix for allocation of logical channel 0
>
> Minskey Guo (1):
> ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
>
> Richard Röjfors (2):
> dma: Add timb-dma
> dma: timb-dma: Update comment and fix compiler warning
>
> Stephen Rothwell (1):
> async_tx: use of kzalloc/kfree requires the include of slab.h
>
> Tobias Klauser (1):
> dmaengine: mpc512x: Use resource_size
>
> arch/arm/mach-u300/include/mach/coh901318.h | 21 -
> arch/arm/plat-nomadik/include/plat/ste_dma40.h | 239 +++
> crypto/async_tx/async_tx.c | 46 +-
> drivers/dma/Kconfig | 14 +
> drivers/dma/Makefile | 2 +
> drivers/dma/at_hdmac.c | 35 +-
> drivers/dma/coh901318.c | 263 ++-
> drivers/dma/dmaengine.c | 22 +-
> drivers/dma/dw_dmac.c | 24 +-
> drivers/dma/fsldma.c | 28 +-
> drivers/dma/ioat/dma.c | 12 +-
> drivers/dma/ioat/dma.h | 19 +-
> drivers/dma/ioat/dma_v2.c | 186 +-
> drivers/dma/ioat/dma_v2.h | 33 +-
> drivers/dma/ioat/dma_v3.c | 143 +-
> drivers/dma/ioat/pci.c | 7 +-
> drivers/dma/iop-adma.c | 39 +-
> drivers/dma/ipu/ipu_idmac.c | 34 +-
> drivers/dma/mpc512x_dma.c | 15 +-
> drivers/dma/mv_xor.c | 25 +-
> drivers/dma/ppc4xx/adma.c | 19 +-
> drivers/dma/shdma.c | 27 +-
> drivers/dma/ste_dma40.c | 2657 ++++++++++++++++++++++++
> drivers/dma/ste_dma40_ll.c | 454 ++++
> drivers/dma/ste_dma40_ll.h | 354 ++++
> drivers/dma/timb_dma.c | 860 ++++++++
> drivers/dma/txx9dmac.c | 23 +-
> drivers/mmc/host/atmel-mci.c | 2 +-
> drivers/serial/sh-sci.c | 2 +-
> drivers/video/mx3fb.c | 3 +-
> include/linux/dmaengine.h | 127 ++-
> include/linux/timb_dma.h | 55 +
> sound/soc/txx9/txx9aclc.c | 7 +-
> 33 files changed, 5286 insertions(+), 511 deletions(-)
> create mode 100644 arch/arm/plat-nomadik/include/plat/ste_dma40.h
> create mode 100644 drivers/dma/ste_dma40.c
> create mode 100644 drivers/dma/ste_dma40_ll.c
> create mode 100644 drivers/dma/ste_dma40_ll.h
> create mode 100644 drivers/dma/timb_dma.c
> create mode 100644 include/linux/timb_dma.h
>
> commit 0b28330e39bbe0ffee4c56b09fc415fcec595ea3
> Merge: 0582763 caa20d97
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Mon May 17 16:30:58 2010 -0700
>
> Merge branch 'ioat' into dmaengine
>
> commit 058276303dbc4ed089c1f7dad0871810b1f5ddf1
> Author: Linus Walleij <linus.walleij@stericsson.com>
> Date: Mon May 17 16:30:42 2010 -0700
>
> DMAENGINE: extend the control command to include an arg
>
> This adds an argument to the DMAengine control function, so that
> we can later provide control commands that need some external data
> passed in through an argument akin to the ioctl() operation
> prototype.
>
> [dan.j.williams@intel.com: fix up some missed conversions]
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit caa20d974c86af496b419eef70010e63b7fab7ac
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Mon May 17 16:24:16 2010 -0700
>
> async_tx: trim dma_async_tx_descriptor in 'no channel switch' case
>
> Saves 24 bytes per descriptor (64-bit) when the channel-switching
> capabilities of async_tx are not required.
>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 4aed79b2818e7330b5d00143e4c20bc6555df91f
> Author: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
> Date: Tue May 18 00:41:21 2010 +0200
>
> DMAENGINE: DMA40 fix for allocation of logical channel 0
>
> Fix for allocation failure of logical channel when event line
> happens to be number 0.
>
> Signed-off-by: Marcin Mielczarczyk <marcin.mielczarczyk@tieto.com>
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit a5ebca4769f28ceade28ff59fcbffb8e184e599c
> Author: Jonas Aaberg <jonas.aberg@stericsson.com>
> Date: Tue May 18 00:41:09 2010 +0200
>
> DMAENGINE: DMA40 support paused channel status
>
> Support determining whether a channel is paused or
> not using the status function.
>
> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 8381fc35244dbdf58cfc49e04e0d7c3498c8aa03
> Author: Tobias Klauser <tklauser@distanz.ch>
> Date: Thu May 6 11:58:55 2010 +0200
>
> dmaengine: mpc512x: Use resource_size
>
> Use the resource_size function instead of manually calculating the
> resource size. This reduces the chance of introducing off-by-one
> errors.
>
> Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit cc05ea0cd63437da2033b3ce6e033b1f1aaaf640
> Author: Jassi Brar <jassi.brar@samsung.com>
> Date: Tue May 4 18:22:15 2010 +0900
>
> DMA ENGINE: Do not reset 'private' of channel
>
> The member 'private' of 'struct dma_chan' is meant for passing
> data between client and the controller driver.
>
> The DMA client driver may point it to platform specific stuff after
> acquiring the channel. So, it is the responsiblity of the same code
> to reset it, if it must.
>
> The DMA engine doesn't set it and hence, shouldn't reset it either.
>
> This reseting of private by DMA Engine comes in the way of implementing
> default channel settings during DMAC probe. That capability is useful
> for not having the clients to always provide platform specific data,
> like Rx/Tx FIFO addresses, which usually doesn't change across channel
> requests.
>
> Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit c86e1401c9f2ba8d989fa1c4b33d0f0ec3ba8aaf
> Author: Minskey Guo <chaohong_guo@linux.intel.com>
> Date: Sun May 2 12:52:35 2010 -0700
>
> ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device
>
> The memory for ioatdma_device structure is being allocated in
> alloc_ioatdma()
>
> Signed-off-by: Minskey Guo <chaohong_guo@linux.intel.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 2adfc550b6d9646301c810643bc309fa49375987
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Sat May 1 15:22:56 2010 -0700
>
> ioat3: disable cacheline-unaligned transfers for raid operations
>
> There are cases where cacheline-unaligned raid operations can hang the
> dma channel. Simply disable these operations by increasing the
> alignment constraints published to async_tx. The raid456 driver always
> issues page aligned requests, so the only in-kernel user of the ioatdma
> driver that is affected by this change is dmatest.
>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 074cc47679f8b0931d7d5384e95822d82768f149
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Sat May 1 15:22:55 2010 -0700
>
> ioat2,3: convert to producer/consumer locking
>
> Use separate locks for the descriptor prep (producer) and descriptor
> cleanup (consumer) paths. Allows the producer path to run concurrently
> with the cleanup path. Inspired by Documentation/circular-buffer.txt.
>
> Cc: David Howells <dhowells@redhat.com>
> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit abb12dfd50c7580d7dcbd581cf6265ba4d01ea7e
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Sat May 1 15:22:54 2010 -0700
>
> ioat: convert to circ_buf
>
> Use the common power-of-2 circular buffer macros.
>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 8d318a50b3d72e3daf94131f91e1ab799a8d5ad4
> Author: Linus Walleij <linus.walleij@stericsson.com>
> Date: Tue Mar 30 15:33:42 2010 +0200
>
> DMAENGINE: Support for ST-Ericssons DMA40 block v3
>
> This is a straightforward driver for the ST-Ericsson DMA40 DMA
> controller found in U8500, implemented akin to the existing
> COH 901 318 driver.
>
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com>
> Cc: STEricsson_nomadik_linux@list.st.com
> Cc: Alessandro Rubini <rubini@unipv.it>
> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 6a3cd3ea48584d14f60dce0b3c4e9e4428beb0fe
> Author: Stephen Rothwell <sfr@canb.auug.org.au>
> Date: Mon Mar 29 15:54:40 2010 +1100
>
> async_tx: use of kzalloc/kfree requires the include of slab.h
>
> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit bca3469205402d9fb14060d255d8786ae2256640
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Fri Mar 26 16:52:10 2010 -0700
>
> dmaengine: provide helper for setting txstate
>
> Simple conditional struct filler to cut out some duplicated code.
>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 0793448187643b50af89d36b08470baf45a3cab4
> Author: Linus Walleij <linus.walleij@stericsson.com>
> Date: Fri Mar 26 16:50:49 2010 -0700
>
> DMAENGINE: generic channel status v2
>
> Convert the device_is_tx_complete() operation on the
> DMA engine to a generic device_tx_status()operation which
> can return three states, DMA_TX_RUNNING, DMA_TX_COMPLETE,
> DMA_TX_PAUSED.
>
> [dan.j.williams@intel.com: update for timberdale]
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Li Yang <leoli@freescale.com>
> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Cc: Paul Mundt <lethal@linux-sh.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
> Cc: Magnus Damm <damm@opensource.se>
> Cc: Liam Girdwood <lrg@slimlogic.co.uk>
> Cc: Joe Perches <joe@perches.com>
> Cc: Roland Dreier <rdreier@cisco.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit c3635c78e500a52c9fcd55de381a72928d9e054d
> Author: Linus Walleij <linus.walleij@stericsson.com>
> Date: Fri Mar 26 16:44:01 2010 -0700
>
> DMAENGINE: generic slave control v2
>
> Convert the device_terminate_all() operation on the
> DMA engine to a generic device_control() operation
> which can now optionally support also pausing and
> resuming DMA on a certain channel. Implemented for the
> COH 901 318 DMAC as an example.
>
> [dan.j.williams@intel.com: update for timberdale]
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Maciej Sosnowski <maciej.sosnowski@intel.com>
> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Li Yang <leoli@freescale.com>
> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> Cc: Paul Mundt <lethal@linux-sh.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
> Cc: Magnus Damm <damm@opensource.se>
> Cc: Liam Girdwood <lrg@slimlogic.co.uk>
> Cc: Joe Perches <joe@perches.com>
> Cc: Roland Dreier <rdreier@cisco.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 0f65169b1bf44220308e1ce1f6666ad03ddc27af
> Author: Richard Röjfors <richard.rojfors@pelagicore.com>
> Date: Fri Mar 26 08:23:58 2010 +0100
>
> dma: timb-dma: Update comment and fix compiler warning
>
> An incremental patch which clarifies what the spinlock is used for
> and fixes a compiler warning.
>
> Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit de5d4453c5b224eefd02b6a141ed411a76d458af
> Author: Richard Röjfors <richard.rojfors@pelagicore.com>
> Date: Thu Mar 25 19:44:21 2010 +0100
>
> dma: Add timb-dma
>
> Adds the support for the DMA engine withing the timberdale FPGA.
>
> The DMA channels are strict device to host, or host to device
> and can not be used for generic memcpy.
>
> Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit 84c8447c544bc7579097649273bc3f4e1b5de6af
> Author: Linus Walleij <linus.walleij@stericsson.com>
> Date: Thu Mar 4 14:40:30 2010 +0100
>
> DMAENGINE: COH 901 318 fix bytesleft
>
> This makes the function to get the number of bytes left in the
> ongoing DMA transaction actually work: the old code did not take
> neither lli:s nor queued jobs into account. Also fix a missing
> spinlock while we're at it.
>
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
> commit cecd87da83869ad4157295b87a2e51e38c3e03bf
> Author: Linus Walleij <linus.walleij@stericsson.com>
> Date: Thu Mar 4 14:31:47 2010 +0100
>
> DMAENGINE: COH 901 318 rename confusing vars
>
> This fixes up the code with a lot of comments that make it readable,
> rename things with opaque names like "data" into something more
> appropriate, and remove some very confusing BUG() statements.
>
> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [GIT PULL] dmaengine/async_tx update for 2.6.35
2010-05-21 23:20 ` Dan Williams
@ 2010-05-22 0:07 ` Linus Torvalds
0 siblings, 0 replies; 3+ messages in thread
From: Linus Torvalds @ 2010-05-22 0:07 UTC (permalink / raw)
To: Dan Williams; +Cc: Andrew Morton, linux-kernel
On Fri, 21 May 2010, Dan Williams wrote:
>
> I think this got overlooked (other pull requests from later in the week
> have gone in).
It was actually still in my queue, but pulled,
Linus
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2010-05-22 0:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-05-19 22:28 [GIT PULL] dmaengine/async_tx update for 2.6.35 Dan Williams
2010-05-21 23:20 ` Dan Williams
2010-05-22 0:07 ` Linus Torvalds
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.