All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Pitre <nicolas.pitre@linaro.org>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	devicetree-discuss@lists.ozlabs.org,
	Pawel Moll <pawel.moll@arm.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Achin Gupta <achin.gupta@arm.com>,
	Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>,
	Amit Kucheria <amit.kucheria@linaro.org>,
	Jon Medhurst <tixy@linaro.org>
Subject: Re: [RFC PATCH v2 1/2] drivers: mfd: refactor the vexpress config bridge API
Date: Wed, 5 Jun 2013 09:52:41 -0400 (EDT)	[thread overview]
Message-ID: <alpine.LFD.2.03.1306050952080.1200@syhkavp.arg> (raw)
In-Reply-To: <1370432767-6620-2-git-send-email-lorenzo.pieralisi@arm.com>

On Wed, 5 Jun 2013, Lorenzo Pieralisi wrote:

> From: Pawel Moll <pawel.moll@arm.com>
> 
> The introduction of Serial Power Controller (SPC) requires the vexpress
> config interface to change slightly since the SPC memory mapped interface
> can be used as configuration bus but also for operating points
> programming and retrieval. The helper that allocates the bridge functions
> requires an additional parameter allowing to request component specific
> functions that need not be initialized through device tree bindings but
> just using simple look-up and statically defined constants.
> 
> This patch introduces the necessary changes to the vexpress config layer
> to cater for the new vexpress bridge interface requirements.
> 
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Cc: Achin Gupta <achin.gupta@arm.com>
> Cc: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Jon Medhurst <tixy@linaro.org>
> Signed-off-by: Pawel Moll <pawel.moll@arm.com>

Acked-by: Nicolas Pitre <nico@linaro.org>

> ---
>  drivers/mfd/vexpress-config.c | 61 +++++++++++++++++++++++++++----------------
>  drivers/mfd/vexpress-sysreg.c |  2 +-
>  include/linux/vexpress.h      | 16 ++++++++----
>  3 files changed, 51 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
> index 84ce6b9..1af2b0e 100644
> --- a/drivers/mfd/vexpress-config.c
> +++ b/drivers/mfd/vexpress-config.c
> @@ -86,29 +86,13 @@ void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge)
>  }
>  EXPORT_SYMBOL(vexpress_config_bridge_unregister);
>  
> -
> -struct vexpress_config_func {
> -	struct vexpress_config_bridge *bridge;
> -	void *func;
> -};
> -
> -struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
> -		struct device_node *node)
> +static struct vexpress_config_bridge *
> +		vexpress_config_bridge_find(struct device_node *node)
>  {
> -	struct device_node *bridge_node;
> -	struct vexpress_config_func *func;
>  	int i;
> +	struct vexpress_config_bridge *res = NULL;
> +	struct device_node *bridge_node = of_node_get(node);
>  
> -	if (WARN_ON(dev && node && dev->of_node != node))
> -		return NULL;
> -	if (dev && !node)
> -		node = dev->of_node;
> -
> -	func = kzalloc(sizeof(*func), GFP_KERNEL);
> -	if (!func)
> -		return NULL;
> -
> -	bridge_node = of_node_get(node);
>  	while (bridge_node) {
>  		const __be32 *prop = of_get_property(bridge_node,
>  				"arm,vexpress,config-bridge", NULL);
> @@ -129,13 +113,46 @@ struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
>  
>  		if (test_bit(i, vexpress_config_bridges_map) &&
>  				bridge->node == bridge_node) {
> -			func->bridge = bridge;
> -			func->func = bridge->info->func_get(dev, node);
> +			res = bridge;
>  			break;
>  		}
>  	}
>  	mutex_unlock(&vexpress_config_bridges_mutex);
>  
> +	return res;
> +}
> +
> +
> +struct vexpress_config_func {
> +	struct vexpress_config_bridge *bridge;
> +	void *func;
> +};
> +
> +struct vexpress_config_func *__vexpress_config_func_get(
> +		struct vexpress_config_bridge *bridge,
> +		struct device *dev,
> +		struct device_node *node,
> +		const char *id)
> +{
> +	struct vexpress_config_func *func;
> +
> +	if (WARN_ON(dev && node && dev->of_node != node))
> +		return NULL;
> +	if (dev && !node)
> +		node = dev->of_node;
> +
> +	if (!bridge)
> +		bridge = vexpress_config_bridge_find(node);
> +	if (!bridge)
> +		return NULL;
> +
> +	func = kzalloc(sizeof(*func), GFP_KERNEL);
> +	if (!func)
> +		return NULL;
> +
> +	func->bridge = bridge;
> +	func->func = bridge->info->func_get(dev, node, id);
> +
>  	if (!func->func) {
>  		of_node_put(node);
>  		kfree(func);
> diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
> index 96a020b..d2599aa 100644
> --- a/drivers/mfd/vexpress-sysreg.c
> +++ b/drivers/mfd/vexpress-sysreg.c
> @@ -165,7 +165,7 @@ static u32 *vexpress_sysreg_config_data;
>  static int vexpress_sysreg_config_tries;
>  
>  static void *vexpress_sysreg_config_func_get(struct device *dev,
> -		struct device_node *node)
> +		struct device_node *node, const char *id)
>  {
>  	struct vexpress_sysreg_config_func *config_func;
>  	u32 site;
> diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
> index 6e7980d..50368e0 100644
> --- a/include/linux/vexpress.h
> +++ b/include/linux/vexpress.h
> @@ -68,7 +68,8 @@
>   */
>  struct vexpress_config_bridge_info {
>  	const char *name;
> -	void *(*func_get)(struct device *dev, struct device_node *node);
> +	void *(*func_get)(struct device *dev, struct device_node *node,
> +			  const char *id);
>  	void (*func_put)(void *func);
>  	int (*func_exec)(void *func, int offset, bool write, u32 *data);
>  };
> @@ -87,12 +88,17 @@ void vexpress_config_complete(struct vexpress_config_bridge *bridge,
>  
>  struct vexpress_config_func;
>  
> -struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
> -		struct device_node *node);
> +struct vexpress_config_func *__vexpress_config_func_get(
> +		struct vexpress_config_bridge *bridge,
> +		struct device *dev,
> +		struct device_node *node,
> +		const char *id);
> +#define vexpress_config_func_get(bridge, id) \
> +		__vexpress_config_func_get(bridge, NULL, NULL, id)
>  #define vexpress_config_func_get_by_dev(dev) \
> -		__vexpress_config_func_get(dev, NULL)
> +		__vexpress_config_func_get(NULL, dev, NULL, NULL)
>  #define vexpress_config_func_get_by_node(node) \
> -		__vexpress_config_func_get(NULL, node)
> +		__vexpress_config_func_get(NULL, NULL, node, NULL)
>  void vexpress_config_func_put(struct vexpress_config_func *func);
>  
>  /* Both may sleep! */
> -- 
> 1.8.2.2
> 
> 

WARNING: multiple messages have this Message-ID (diff)
From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v2 1/2] drivers: mfd: refactor the vexpress config bridge API
Date: Wed, 5 Jun 2013 09:52:41 -0400 (EDT)	[thread overview]
Message-ID: <alpine.LFD.2.03.1306050952080.1200@syhkavp.arg> (raw)
In-Reply-To: <1370432767-6620-2-git-send-email-lorenzo.pieralisi@arm.com>

On Wed, 5 Jun 2013, Lorenzo Pieralisi wrote:

> From: Pawel Moll <pawel.moll@arm.com>
> 
> The introduction of Serial Power Controller (SPC) requires the vexpress
> config interface to change slightly since the SPC memory mapped interface
> can be used as configuration bus but also for operating points
> programming and retrieval. The helper that allocates the bridge functions
> requires an additional parameter allowing to request component specific
> functions that need not be initialized through device tree bindings but
> just using simple look-up and statically defined constants.
> 
> This patch introduces the necessary changes to the vexpress config layer
> to cater for the new vexpress bridge interface requirements.
> 
> Cc: Samuel Ortiz <sameo@linux.intel.com>
> Cc: Achin Gupta <achin.gupta@arm.com>
> Cc: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
> Cc: Amit Kucheria <amit.kucheria@linaro.org>
> Cc: Jon Medhurst <tixy@linaro.org>
> Signed-off-by: Pawel Moll <pawel.moll@arm.com>

Acked-by: Nicolas Pitre <nico@linaro.org>

> ---
>  drivers/mfd/vexpress-config.c | 61 +++++++++++++++++++++++++++----------------
>  drivers/mfd/vexpress-sysreg.c |  2 +-
>  include/linux/vexpress.h      | 16 ++++++++----
>  3 files changed, 51 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
> index 84ce6b9..1af2b0e 100644
> --- a/drivers/mfd/vexpress-config.c
> +++ b/drivers/mfd/vexpress-config.c
> @@ -86,29 +86,13 @@ void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge)
>  }
>  EXPORT_SYMBOL(vexpress_config_bridge_unregister);
>  
> -
> -struct vexpress_config_func {
> -	struct vexpress_config_bridge *bridge;
> -	void *func;
> -};
> -
> -struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
> -		struct device_node *node)
> +static struct vexpress_config_bridge *
> +		vexpress_config_bridge_find(struct device_node *node)
>  {
> -	struct device_node *bridge_node;
> -	struct vexpress_config_func *func;
>  	int i;
> +	struct vexpress_config_bridge *res = NULL;
> +	struct device_node *bridge_node = of_node_get(node);
>  
> -	if (WARN_ON(dev && node && dev->of_node != node))
> -		return NULL;
> -	if (dev && !node)
> -		node = dev->of_node;
> -
> -	func = kzalloc(sizeof(*func), GFP_KERNEL);
> -	if (!func)
> -		return NULL;
> -
> -	bridge_node = of_node_get(node);
>  	while (bridge_node) {
>  		const __be32 *prop = of_get_property(bridge_node,
>  				"arm,vexpress,config-bridge", NULL);
> @@ -129,13 +113,46 @@ struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
>  
>  		if (test_bit(i, vexpress_config_bridges_map) &&
>  				bridge->node == bridge_node) {
> -			func->bridge = bridge;
> -			func->func = bridge->info->func_get(dev, node);
> +			res = bridge;
>  			break;
>  		}
>  	}
>  	mutex_unlock(&vexpress_config_bridges_mutex);
>  
> +	return res;
> +}
> +
> +
> +struct vexpress_config_func {
> +	struct vexpress_config_bridge *bridge;
> +	void *func;
> +};
> +
> +struct vexpress_config_func *__vexpress_config_func_get(
> +		struct vexpress_config_bridge *bridge,
> +		struct device *dev,
> +		struct device_node *node,
> +		const char *id)
> +{
> +	struct vexpress_config_func *func;
> +
> +	if (WARN_ON(dev && node && dev->of_node != node))
> +		return NULL;
> +	if (dev && !node)
> +		node = dev->of_node;
> +
> +	if (!bridge)
> +		bridge = vexpress_config_bridge_find(node);
> +	if (!bridge)
> +		return NULL;
> +
> +	func = kzalloc(sizeof(*func), GFP_KERNEL);
> +	if (!func)
> +		return NULL;
> +
> +	func->bridge = bridge;
> +	func->func = bridge->info->func_get(dev, node, id);
> +
>  	if (!func->func) {
>  		of_node_put(node);
>  		kfree(func);
> diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
> index 96a020b..d2599aa 100644
> --- a/drivers/mfd/vexpress-sysreg.c
> +++ b/drivers/mfd/vexpress-sysreg.c
> @@ -165,7 +165,7 @@ static u32 *vexpress_sysreg_config_data;
>  static int vexpress_sysreg_config_tries;
>  
>  static void *vexpress_sysreg_config_func_get(struct device *dev,
> -		struct device_node *node)
> +		struct device_node *node, const char *id)
>  {
>  	struct vexpress_sysreg_config_func *config_func;
>  	u32 site;
> diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
> index 6e7980d..50368e0 100644
> --- a/include/linux/vexpress.h
> +++ b/include/linux/vexpress.h
> @@ -68,7 +68,8 @@
>   */
>  struct vexpress_config_bridge_info {
>  	const char *name;
> -	void *(*func_get)(struct device *dev, struct device_node *node);
> +	void *(*func_get)(struct device *dev, struct device_node *node,
> +			  const char *id);
>  	void (*func_put)(void *func);
>  	int (*func_exec)(void *func, int offset, bool write, u32 *data);
>  };
> @@ -87,12 +88,17 @@ void vexpress_config_complete(struct vexpress_config_bridge *bridge,
>  
>  struct vexpress_config_func;
>  
> -struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
> -		struct device_node *node);
> +struct vexpress_config_func *__vexpress_config_func_get(
> +		struct vexpress_config_bridge *bridge,
> +		struct device *dev,
> +		struct device_node *node,
> +		const char *id);
> +#define vexpress_config_func_get(bridge, id) \
> +		__vexpress_config_func_get(bridge, NULL, NULL, id)
>  #define vexpress_config_func_get_by_dev(dev) \
> -		__vexpress_config_func_get(dev, NULL)
> +		__vexpress_config_func_get(NULL, dev, NULL, NULL)
>  #define vexpress_config_func_get_by_node(node) \
> -		__vexpress_config_func_get(NULL, node)
> +		__vexpress_config_func_get(NULL, NULL, node, NULL)
>  void vexpress_config_func_put(struct vexpress_config_func *func);
>  
>  /* Both may sleep! */
> -- 
> 1.8.2.2
> 
> 

  reply	other threads:[~2013-06-05 13:52 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-05 11:46 [RFC PATCH v2 0/2] drivers: mfd: Versatile Express SPC support Lorenzo Pieralisi
2013-06-05 11:46 ` Lorenzo Pieralisi
2013-06-05 11:46 ` Lorenzo Pieralisi
2013-06-05 11:46 ` [RFC PATCH v2 1/2] drivers: mfd: refactor the vexpress config bridge API Lorenzo Pieralisi
2013-06-05 11:46   ` Lorenzo Pieralisi
2013-06-05 13:52   ` Nicolas Pitre [this message]
2013-06-05 13:52     ` Nicolas Pitre
2013-06-05 11:46 ` [RFC PATCH v2 2/2] drivers: mfd: vexpress: add Serial Power Controller (SPC) support Lorenzo Pieralisi
2013-06-05 11:46   ` Lorenzo Pieralisi
2013-06-05 14:07   ` Nicolas Pitre
2013-06-05 14:07     ` Nicolas Pitre
2013-06-05 16:32   ` Jon Medhurst (Tixy)
2013-06-05 16:32     ` Jon Medhurst (Tixy)
2013-06-05 18:08   ` Jon Medhurst (Tixy)
2013-06-05 18:08     ` Jon Medhurst (Tixy)
2013-06-05 18:22     ` Lorenzo Pieralisi
2013-06-05 18:22       ` Lorenzo Pieralisi
2013-06-05 18:22       ` Lorenzo Pieralisi
2013-06-05 14:15 ` [RFC PATCH v2 0/2] drivers: mfd: Versatile Express SPC support Nicolas Pitre
2013-06-05 14:15   ` Nicolas Pitre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.03.1306050952080.1200@syhkavp.arg \
    --to=nicolas.pitre@linaro.org \
    --cc=Sudeep.KarkadaNagesha@arm.com \
    --cc=achin.gupta@arm.com \
    --cc=amit.kucheria@linaro.org \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=sameo@linux.intel.com \
    --cc=tixy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.