* pj4 -marm breaks thumb ftrace
@ 2015-11-12 9:50 Stephen Boyd
2015-11-12 10:30 ` Ard Biesheuvel
0 siblings, 1 reply; 6+ messages in thread
From: Stephen Boyd @ 2015-11-12 9:50 UTC (permalink / raw)
To: linux-arm-kernel
When I boot up a thumb2 multi-v7 kernel with ftrace enabled I get
this ftrace bug splat.
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:1979
ftrace_bug+0x115/0x1bc()
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-10337-g3ea2911b81d3-dirty #129
Hardware name: Qualcomm (Flattened Device Tree)
[<c030cf09>] (unwind_backtrace) from [<c030903d>] (show_stack+0x11/0x14)
[<c030903d>] (show_stack) from [<c0501337>] (dump_stack+0x57/0x6c)
[<c0501337>] (dump_stack) from [<c033249b>] (warn_slowpath_common+0x57/0x88)
[<c033249b>] (warn_slowpath_common) from [<c03324e3>] (warn_slowpath_null+0x17/0x1c)
[<c03324e3>] (warn_slowpath_null) from [<c038c359>] (ftrace_bug+0x115/0x1bc)
[<c038c359>] (ftrace_bug) from [<c038c5d7>] (ftrace_process_locs+0x1d7/0x3e4)
[<c038c5d7>] (ftrace_process_locs) from [<c0e18391>] (ftrace_init+0x49/0xb0)
[<c0e18391>] (ftrace_init) from [<c0e0095b>] (start_kernel+0x26f/0x2d8)
[<c0e0095b>] (start_kernel) from [<0020807f>] (0x20807f)
---[ end trace cb88537fdc8fa200 ]---
ftrace failed to modify [<c030e1e4>] iwmmxt_do+0x8/0x3c
actual: dc:f8:ff:fa
ftrace record flags: 0
(0) expected tramp: c030c565
I suspect this is caused by commit 13d1b9575ac2 (ARM: 8221/1:
PJ4: allow building in Thumb-2 mode, 2014-11-25) which adds an
-marm flag to the compilation of arch/arm/kernel/pj4-cp0.c. When
ftrace tries to replace the instruction in ftrace_make_nop() ->
ftrace_modify_code(), it gets confused because it checks to make
sure the instruction it's replacing is actually a branch to
mcount with a thumb encoding. But given that the branch is done
in arm instead of thumb it doesn't see the instruction it's
looking for and bails out with this bug.
Should we mark this whole file as notrace? That at least seems to
fix the problem for me. I imagine we could make things more
complicated and try to figure out if the branch is either arm or
thumb and replace it with the appropriate nop or interworking
branch to ftrace code, but do we really care?
Here's the simple patch.
-----8<----
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index af9e59bf3831..f65daa440610 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -73,6 +73,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \
perf_event_v7.o
+CFLAGS_REMOVE_pj4-cp0.o = -pg
CFLAGS_pj4-cp0.o := -marm
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 6+ messages in thread
* pj4 -marm breaks thumb ftrace
2015-11-12 9:50 pj4 -marm breaks thumb ftrace Stephen Boyd
@ 2015-11-12 10:30 ` Ard Biesheuvel
2015-11-12 10:38 ` Russell King - ARM Linux
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Ard Biesheuvel @ 2015-11-12 10:30 UTC (permalink / raw)
To: linux-arm-kernel
On 12 November 2015 at 10:50, Stephen Boyd <sboyd@codeaurora.org> wrote:
> When I boot up a thumb2 multi-v7 kernel with ftrace enabled I get
> this ftrace bug splat.
>
> WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:1979
> ftrace_bug+0x115/0x1bc()
> Modules linked in:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-10337-g3ea2911b81d3-dirty #129
> Hardware name: Qualcomm (Flattened Device Tree)
> [<c030cf09>] (unwind_backtrace) from [<c030903d>] (show_stack+0x11/0x14)
> [<c030903d>] (show_stack) from [<c0501337>] (dump_stack+0x57/0x6c)
> [<c0501337>] (dump_stack) from [<c033249b>] (warn_slowpath_common+0x57/0x88)
> [<c033249b>] (warn_slowpath_common) from [<c03324e3>] (warn_slowpath_null+0x17/0x1c)
> [<c03324e3>] (warn_slowpath_null) from [<c038c359>] (ftrace_bug+0x115/0x1bc)
> [<c038c359>] (ftrace_bug) from [<c038c5d7>] (ftrace_process_locs+0x1d7/0x3e4)
> [<c038c5d7>] (ftrace_process_locs) from [<c0e18391>] (ftrace_init+0x49/0xb0)
> [<c0e18391>] (ftrace_init) from [<c0e0095b>] (start_kernel+0x26f/0x2d8)
> [<c0e0095b>] (start_kernel) from [<0020807f>] (0x20807f)
> ---[ end trace cb88537fdc8fa200 ]---
> ftrace failed to modify [<c030e1e4>] iwmmxt_do+0x8/0x3c
> actual: dc:f8:ff:fa
> ftrace record flags: 0
> (0) expected tramp: c030c565
>
> I suspect this is caused by commit 13d1b9575ac2 (ARM: 8221/1:
> PJ4: allow building in Thumb-2 mode, 2014-11-25) which adds an
> -marm flag to the compilation of arch/arm/kernel/pj4-cp0.c. When
> ftrace tries to replace the instruction in ftrace_make_nop() ->
> ftrace_modify_code(), it gets confused because it checks to make
> sure the instruction it's replacing is actually a branch to
> mcount with a thumb encoding. But given that the branch is done
> in arm instead of thumb it doesn't see the instruction it's
> looking for and bails out with this bug.
>
> Should we mark this whole file as notrace? That at least seems to
> fix the problem for me. I imagine we could make things more
> complicated and try to figure out if the branch is either arm or
> thumb and replace it with the appropriate nop or interworking
> branch to ftrace code, but do we really care?
>
I wonder if we should simply fix the code instead.
Compiling pj4-cp0.c in thumb mode fails on the sub instruction in the
following sequence:
static void __init pj4_cp_access_write(u32 value)
{
u32 temp;
__asm__ __volatile__ (
"mcr p15, 0, %1, c1, c0, 2\n\t"
"mrc p15, 0, %0, c1, c0, 2\n\t"
"mov %0, %0\n\t"
"sub pc, pc, #4\n\t"
: "=r" (temp) : "r" (value));
}
I wonder if the sub instruction is simply there to flush the pipeline,
but let's not get into that. I propose we just apply the patch below to
move this code (and its _read() counterpart) to iwmmxt.S, which is
already built as ARM, and not subject to instrumentation.
-----8<-----
From de52762b71c85c6c2142a67ba8833a13d4ca8acb Mon Sep 17 00:00:00 2001
From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Date: Thu, 12 Nov 2015 11:17:46 +0100
Subject: [PATCH] ARM: PJ4: move coprocessor register access sequences to
iwmmxt.S
The PJ4 inline asm sequences in pj4-cp0.c cannot be built in Thumb-2
mode, due to the way they perform arithmetic on the program counter, so
it is built in ARM mode instead. However, building C files in ARM mode
under CONFIG_THUMB2_KERNEL is problematic, since the instrumentation
performed by subsystems like ftrace does not expect having to deal with
interworking branches.
So instead, revert to building pj4-cp0.c in Thumb-2 mode, and move the
offending sequences to iwmmxt.S, which is not instrumented anyway, and
is already built in ARM mode unconditionally.
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index af9e59bf3831..3c789496297f 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -73,7 +73,6 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \
perf_event_v7.o
-CFLAGS_pj4-cp0.o := -marm
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index 49fadbda8c63..2cd418f1b9c3 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -370,3 +370,19 @@ ENDPROC(iwmmxt_task_release)
concan_owner:
.word 0
+#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
+
+ENTRY(pj4_cp_access_read)
+ mrc p15, 0, r0, c1, c0, 2
+ ret lr
+ENDPROC(pj4_cp_access_read)
+
+ENTRY(pj4_cp_access_write)
+ mcr p15, 0, r0, c1, c0, 2
+ mrc p15, 0, r0, c1, c0, 2
+ mov r0, r0
+ sub pc, pc, #4
+ ret lr
+ENDPROC(pj4_cp_access_write)
+
+#endif
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
index 8153e36b2491..4f226e175734 100644
--- a/arch/arm/kernel/pj4-cp0.c
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -49,28 +49,8 @@
.notifier_call = iwmmxt_do,
};
-
-static u32 __init pj4_cp_access_read(void)
-{
- u32 value;
-
- __asm__ __volatile__ (
- "mrc p15, 0, %0, c1, c0, 2\n\t"
- : "=r" (value));
- return value;
-}
-
-static void __init pj4_cp_access_write(u32 value)
-{
- u32 temp;
-
- __asm__ __volatile__ (
- "mcr p15, 0, %1, c1, c0, 2\n\t"
- "mrc p15, 0, %0, c1, c0, 2\n\t"
- "mov %0, %0\n\t"
- "sub pc, pc, #4\n\t"
- : "=r" (temp) : "r" (value));
-}
+asmlinkage u32 pj4_cp_access_read(void);
+asmlinkage void pj4_cp_access_write(u32 value);
static int __init pj4_get_iwmmxt_version(void)
{
^ permalink raw reply related [flat|nested] 6+ messages in thread
* pj4 -marm breaks thumb ftrace
2015-11-12 10:30 ` Ard Biesheuvel
@ 2015-11-12 10:38 ` Russell King - ARM Linux
2015-11-12 15:22 ` Nicolas Pitre
2015-11-12 20:11 ` Stephen Boyd
2 siblings, 0 replies; 6+ messages in thread
From: Russell King - ARM Linux @ 2015-11-12 10:38 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 12, 2015 at 11:30:24AM +0100, Ard Biesheuvel wrote:
> Compiling pj4-cp0.c in thumb mode fails on the sub instruction in the
> following sequence:
>
> static void __init pj4_cp_access_write(u32 value)
> {
> u32 temp;
>
> __asm__ __volatile__ (
> "mcr p15, 0, %1, c1, c0, 2\n\t"
> "mrc p15, 0, %0, c1, c0, 2\n\t"
> "mov %0, %0\n\t"
> "sub pc, pc, #4\n\t"
> : "=r" (temp) : "r" (value));
> }
>
> I wonder if the sub instruction is simply there to flush the pipeline, but
> let's not get into that.
It is. The whole "mov %0, %0; sub pc, pc, #4" is a documented requirement
for Xscale and derivatives to ensure that effects of previous instructions
are seen by following instructios. It predates ARMs barriers.
--
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
^ permalink raw reply [flat|nested] 6+ messages in thread
* pj4 -marm breaks thumb ftrace
2015-11-12 10:30 ` Ard Biesheuvel
2015-11-12 10:38 ` Russell King - ARM Linux
@ 2015-11-12 15:22 ` Nicolas Pitre
2015-11-12 15:50 ` Ard Biesheuvel
2015-11-12 20:11 ` Stephen Boyd
2 siblings, 1 reply; 6+ messages in thread
From: Nicolas Pitre @ 2015-11-12 15:22 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 12 Nov 2015, Ard Biesheuvel wrote:
> On 12 November 2015 at 10:50, Stephen Boyd <sboyd@codeaurora.org> wrote:
> > When I boot up a thumb2 multi-v7 kernel with ftrace enabled I get
> > this ftrace bug splat.
> >
> > WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:1979
> > ftrace_bug+0x115/0x1bc()
> > Modules linked in:
> > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-10337-g3ea2911b81d3-dirty
> > #129
> > Hardware name: Qualcomm (Flattened Device Tree)
> > [<c030cf09>] (unwind_backtrace) from [<c030903d>] (show_stack+0x11/0x14)
> > [<c030903d>] (show_stack) from [<c0501337>] (dump_stack+0x57/0x6c)
> > [<c0501337>] (dump_stack) from [<c033249b>] (warn_slowpath_common+0x57/0x88)
> > [<c033249b>] (warn_slowpath_common) from [<c03324e3>]
> > (warn_slowpath_null+0x17/0x1c)
> > [<c03324e3>] (warn_slowpath_null) from [<c038c359>] (ftrace_bug+0x115/0x1bc)
> > [<c038c359>] (ftrace_bug) from [<c038c5d7>]
> > (ftrace_process_locs+0x1d7/0x3e4)
> > [<c038c5d7>] (ftrace_process_locs) from [<c0e18391>] (ftrace_init+0x49/0xb0)
> > [<c0e18391>] (ftrace_init) from [<c0e0095b>] (start_kernel+0x26f/0x2d8)
> > [<c0e0095b>] (start_kernel) from [<0020807f>] (0x20807f)
> > ---[ end trace cb88537fdc8fa200 ]---
> > ftrace failed to modify [<c030e1e4>] iwmmxt_do+0x8/0x3c
> > actual: dc:f8:ff:fa
> > ftrace record flags: 0
> > (0) expected tramp: c030c565
> >
> > I suspect this is caused by commit 13d1b9575ac2 (ARM: 8221/1:
> > PJ4: allow building in Thumb-2 mode, 2014-11-25) which adds an
> > -marm flag to the compilation of arch/arm/kernel/pj4-cp0.c. When
> > ftrace tries to replace the instruction in ftrace_make_nop() ->
> > ftrace_modify_code(), it gets confused because it checks to make
> > sure the instruction it's replacing is actually a branch to
> > mcount with a thumb encoding. But given that the branch is done
> > in arm instead of thumb it doesn't see the instruction it's
> > looking for and bails out with this bug.
> >
> > Should we mark this whole file as notrace? That at least seems to
> > fix the problem for me. I imagine we could make things more
> > complicated and try to figure out if the branch is either arm or
> > thumb and replace it with the appropriate nop or interworking
> > branch to ftrace code, but do we really care?
> >
>
> I wonder if we should simply fix the code instead.
>
> Compiling pj4-cp0.c in thumb mode fails on the sub instruction in the
> following sequence:
>
> static void __init pj4_cp_access_write(u32 value)
> {
> u32 temp;
>
> __asm__ __volatile__ (
> "mcr p15, 0, %1, c1, c0, 2\n\t"
> "mrc p15, 0, %0, c1, c0, 2\n\t"
> "mov %0, %0\n\t"
> "sub pc, pc, #4\n\t"
> : "=r" (temp) : "r" (value));
> }
>
> I wonder if the sub instruction is simply there to flush the pipeline, but
> let's not get into that. I propose we just apply the patch below to move this
> code (and its _read() counterpart) to iwmmxt.S, which is already built as ARM,
> and not subject to instrumentation.
>
> -----8<-----
> From de52762b71c85c6c2142a67ba8833a13d4ca8acb Mon Sep 17 00:00:00 2001
> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Date: Thu, 12 Nov 2015 11:17:46 +0100
> Subject: [PATCH] ARM: PJ4: move coprocessor register access sequences to
> iwmmxt.S
>
> The PJ4 inline asm sequences in pj4-cp0.c cannot be built in Thumb-2 mode, due
> to the way they perform arithmetic on the program counter, so it is built in
> ARM mode instead. However, building C files in ARM mode under
> CONFIG_THUMB2_KERNEL is problematic, since the instrumentation performed by
> subsystems like ftrace does not expect having to deal with interworking
> branches.
>
> So instead, revert to building pj4-cp0.c in Thumb-2 mode, and move the
> offending sequences to iwmmxt.S, which is not instrumented anyway, and is
> already built in ARM mode unconditionally.
>
> Reported-by: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
>
> diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
> index af9e59bf3831..3c789496297f 100644
> --- a/arch/arm/kernel/Makefile
> +++ b/arch/arm/kernel/Makefile
> @@ -73,7 +73,6 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o
> obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
> obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \
> perf_event_v7.o
> -CFLAGS_pj4-cp0.o := -marm
> AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
> obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
> obj-$(CONFIG_VDSO) += vdso.o
> diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
> index 49fadbda8c63..2cd418f1b9c3 100644
> --- a/arch/arm/kernel/iwmmxt.S
> +++ b/arch/arm/kernel/iwmmxt.S
> @@ -370,3 +370,19 @@ ENDPROC(iwmmxt_task_release)
> concan_owner:
> .word 0
>
> +#if defined(CONFIG_CPU_PJ4) || defined(CONFIG_CPU_PJ4B)
> +
You might add __INIT here.
> +ENTRY(pj4_cp_access_read)
> + mrc p15, 0, r0, c1, c0, 2
> + ret lr
> +ENDPROC(pj4_cp_access_read)
> +
> +ENTRY(pj4_cp_access_write)
> + mcr p15, 0, r0, c1, c0, 2
> + mrc p15, 0, r0, c1, c0, 2
> + mov r0, r0
> + sub pc, pc, #4
> + ret lr
> +ENDPROC(pj4_cp_access_write)
> +
And __FINIT here.
> +#endif
> diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
> index 8153e36b2491..4f226e175734 100644
> --- a/arch/arm/kernel/pj4-cp0.c
> +++ b/arch/arm/kernel/pj4-cp0.c
> @@ -49,28 +49,8 @@
> .notifier_call = iwmmxt_do,
> };
>
> -
> -static u32 __init pj4_cp_access_read(void)
> -{
> - u32 value;
> -
> - __asm__ __volatile__ (
> - "mrc p15, 0, %0, c1, c0, 2\n\t"
> - : "=r" (value));
> - return value;
> -}
> -
> -static void __init pj4_cp_access_write(u32 value)
> -{
> - u32 temp;
> -
> - __asm__ __volatile__ (
> - "mcr p15, 0, %1, c1, c0, 2\n\t"
> - "mrc p15, 0, %0, c1, c0, 2\n\t"
> - "mov %0, %0\n\t"
> - "sub pc, pc, #4\n\t"
> - : "=r" (temp) : "r" (value));
> -}
> +asmlinkage u32 pj4_cp_access_read(void);
> +asmlinkage void pj4_cp_access_write(u32 value);
>
> static int __init pj4_get_iwmmxt_version(void)
> {
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* pj4 -marm breaks thumb ftrace
2015-11-12 15:22 ` Nicolas Pitre
@ 2015-11-12 15:50 ` Ard Biesheuvel
0 siblings, 0 replies; 6+ messages in thread
From: Ard Biesheuvel @ 2015-11-12 15:50 UTC (permalink / raw)
To: linux-arm-kernel
On 12 November 2015 at 16:22, Nicolas Pitre <nicolas.pitre@linaro.org> wrote:
> On Thu, 12 Nov 2015, Ard Biesheuvel wrote:
>
[...]
>
> You might add __INIT here.
>
>> +ENTRY(pj4_cp_access_read)
>> + mrc p15, 0, r0, c1, c0, 2
>> + ret lr
>> +ENDPROC(pj4_cp_access_read)
>> +
>> +ENTRY(pj4_cp_access_write)
>> + mcr p15, 0, r0, c1, c0, 2
>> + mrc p15, 0, r0, c1, c0, 2
>> + mov r0, r0
>> + sub pc, pc, #4
>> + ret lr
>> +ENDPROC(pj4_cp_access_write)
>> +
>
> And __FINIT here.
>
OK, I will do that. Thanks for the tip.
--
Ard.
^ permalink raw reply [flat|nested] 6+ messages in thread
* pj4 -marm breaks thumb ftrace
2015-11-12 10:30 ` Ard Biesheuvel
2015-11-12 10:38 ` Russell King - ARM Linux
2015-11-12 15:22 ` Nicolas Pitre
@ 2015-11-12 20:11 ` Stephen Boyd
2 siblings, 0 replies; 6+ messages in thread
From: Stephen Boyd @ 2015-11-12 20:11 UTC (permalink / raw)
To: linux-arm-kernel
On 11/12, Ard Biesheuvel wrote:
> On 12 November 2015 at 10:50, Stephen Boyd <sboyd@codeaurora.org> wrote:
>
> -----8<-----
> From de52762b71c85c6c2142a67ba8833a13d4ca8acb Mon Sep 17 00:00:00 2001
> From: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Date: Thu, 12 Nov 2015 11:17:46 +0100
> Subject: [PATCH] ARM: PJ4: move coprocessor register access sequences to
> iwmmxt.S
>
> The PJ4 inline asm sequences in pj4-cp0.c cannot be built in Thumb-2
> mode, due to the way they perform arithmetic on the program counter,
> so it is built in ARM mode instead. However, building C files in ARM
> mode under CONFIG_THUMB2_KERNEL is problematic, since the
> instrumentation performed by subsystems like ftrace does not expect
> having to deal with interworking branches.
>
> So instead, revert to building pj4-cp0.c in Thumb-2 mode, and move the
> offending sequences to iwmmxt.S, which is not instrumented anyway,
> and is already built in ARM mode unconditionally.
>
> Reported-by: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
I was thinking alone the same lines for an alternate solution. If
you resend with the __INIT stuff I'll test it out.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-11-12 20:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-11-12 9:50 pj4 -marm breaks thumb ftrace Stephen Boyd
2015-11-12 10:30 ` Ard Biesheuvel
2015-11-12 10:38 ` Russell King - ARM Linux
2015-11-12 15:22 ` Nicolas Pitre
2015-11-12 15:50 ` Ard Biesheuvel
2015-11-12 20:11 ` Stephen Boyd
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.