All of lore.kernel.org
 help / color / mirror / Atom feed
* support for TQ tb5200l
@ 2010-04-16 16:49 Vitus Jensen
  2010-04-16 16:51 ` [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox' Vitus Jensen
                   ` (4 more replies)
  0 siblings, 5 replies; 13+ messages in thread
From: Vitus Jensen @ 2010-04-16 16:49 UTC (permalink / raw)
  To: Openembedded-devel

The following patches add support for TQ's TB5200L a small powerpc-based
machine providing ethernet, USB host, RS232, RS485 and 2 CAN busses.
See http://www.tq-components.com for details.

Bye,
   Vitus

-- 
Vitus Jensen, Hannover, Germany, Universe (current)
pgp public key available from keyservers



^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox'
  2010-04-16 16:49 support for TQ tb5200l Vitus Jensen
@ 2010-04-16 16:51 ` Vitus Jensen
  2010-04-18  8:19   ` Marco Cavallini
  2010-04-16 16:52 ` [PATCH 2/5] base-files: tb5200l specific changes Vitus Jensen
                   ` (3 subsequent siblings)
  4 siblings, 1 reply; 13+ messages in thread
From: Vitus Jensen @ 2010-04-16 16:51 UTC (permalink / raw)
  To: openembedded-devel

[PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox'

Signed-off-by: Vitus Jensen <vjensen@gmx.de>
---
 conf/machine/tb5200l.conf |   28 ++++++++++++++++++++++++++++
 1 files changed, 28 insertions(+), 0 deletions(-)
 create mode 100644 conf/machine/tb5200l.conf

diff --git a/conf/machine/tb5200l.conf b/conf/machine/tb5200l.conf
new file mode 100644
index 0000000..5601397
--- /dev/null
+++ b/conf/machine/tb5200l.conf
@@ -0,0 +1,28 @@
+#@TYPE: Machine
+#@NAME: TQ Components' Tiny Box TB5200L
+#@DESCRIPTION: Mini industrial control
+
+TARGET_ARCH = "powerpc"
+PACKAGE_EXTRA_ARCHS = "ppc"
+
+MACHINE_FEATURES                = "kernel26 usbhost ext2"
+MACHINE_TASK_PROVIDER           = "task-base"
+MACHINE_EXTRA_RRECOMMENDS       = "u-boot-utils iproute2 canutils"
+
+USE_DEVFS = "0"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux = "2.6.32"
+PREFERRED_VERSION_linux-libc-headers = "2.6.32"
+
+# don't try to access tty1 (used for application code)
+USE_VT = "0"
+
+SERIAL_CONSOLE = "115200 ttyPSC0"
+KERNEL_DEVICETREE_tb5200l = "arch/${ARCH}/boot/dts/tqm5200.dts"
+EXTRA_IMAGECMD_jffs2 = "--big-endian -e 0x20000"
+
+# TB5200L carries kernel in separate flash partition
+ROOTFS_POSTPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*Image*"
+
+require conf/machine/include/tune-ppc603e.inc
-- 
1.5.6.5




^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH 2/5] base-files: tb5200l specific changes
  2010-04-16 16:49 support for TQ tb5200l Vitus Jensen
  2010-04-16 16:51 ` [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox' Vitus Jensen
@ 2010-04-16 16:52 ` Vitus Jensen
  2010-04-18  9:11   ` Marco Cavallini
  2010-04-18 10:50   ` Koen Kooi
  2010-04-16 16:53 ` [PATCH 3/5] netbase: add tb5200l specific /etc/network/interfaces Vitus Jensen
                   ` (2 subsequent siblings)
  4 siblings, 2 replies; 13+ messages in thread
From: Vitus Jensen @ 2010-04-16 16:52 UTC (permalink / raw)
  To: openembedded-devel

* create /opt directory
* fstab which mounts / and /opt from jffs2 filesystem on mtd
* link /tmp to /var/tmp
* issue and issue.net

Signed-off-by: Vitus Jensen <vjensen@gmx.de>
---
 recipes/base-files/base-files/tb5200l/fstab     |   10 ++++++++++
 recipes/base-files/base-files/tb5200l/issue     |    2 ++
 recipes/base-files/base-files/tb5200l/issue.net |    3 +++
 recipes/base-files/base-files_3.0.14.bb         |    8 +++++++-
 4 files changed, 22 insertions(+), 1 deletions(-)
 create mode 100644 recipes/base-files/base-files/tb5200l/fstab
 create mode 100644 recipes/base-files/base-files/tb5200l/issue
 create mode 100644 recipes/base-files/base-files/tb5200l/issue.net

diff --git a/recipes/base-files/base-files/tb5200l/fstab b/recipes/base-files/base-files/tb5200l/fstab
new file mode 100644
index 0000000..38de296
--- /dev/null
+++ b/recipes/base-files/base-files/tb5200l/fstab
@@ -0,0 +1,10 @@
+# tb5200l filesystem, mount / read-only, mount /opt read-write
+
+rootfs		/		jffs2		defaults		1  1
+/dev/mtdblock4 	/opt 		jffs2		defaults		0  0
+proc 		/proc 		proc		defaults		0  0
+devpts 		/dev/pts 	devpts		mode=0620,gid=5		0  0
+usbfs 		/proc/bus/usb 	usbfs		defaults		0  0
+tmpfs 		/var/volatile 	tmpfs		defaults		0  0
+tmpfs 		/dev/shm 	tmpfs		mode=0777		0  0
+tmpfs 		/media/ram 	tmpfs		defaults		0  0
diff --git a/recipes/base-files/base-files/tb5200l/issue b/recipes/base-files/base-files/tb5200l/issue
new file mode 100644
index 0000000..5f4ee1f
--- /dev/null
+++ b/recipes/base-files/base-files/tb5200l/issue
@@ -0,0 +1,2 @@
+Cameron Linux \n \l
+
diff --git a/recipes/base-files/base-files/tb5200l/issue.net b/recipes/base-files/base-files/tb5200l/issue.net
new file mode 100644
index 0000000..b5cefd4
--- /dev/null
+++ b/recipes/base-files/base-files/tb5200l/issue.net
@@ -0,0 +1,3 @@
+Cameron Linux %h
+
+
diff --git a/recipes/base-files/base-files_3.0.14.bb b/recipes/base-files/base-files_3.0.14.bb
index 483aef7..e341adc 100644
--- a/recipes/base-files/base-files_3.0.14.bb
+++ b/recipes/base-files/base-files_3.0.14.bb
@@ -42,7 +42,7 @@ dirs755 = "/bin /boot /dev ${sysconfdir} ${sysconfdir}/default \
 	   ${localstatedir}/volatile/lock/subsys \
 	   ${localstatedir}/volatile/log \
 	   ${localstatedir}/volatile/run \
-	   /mnt /media /media/card /media/cf /media/net /media/ram \
+	   /opt /mnt /media /media/card /media/cf /media/net /media/ram \
 	   /media/union /media/realroot /media/hdd \
 	   /media/mmc1"

@@ -157,6 +157,12 @@ do_install_append_netbook-pro () {
 	mkdir -p ${D}/initrd
 }

+do_install_append_tb5200l() {
+	rmdir ${D}/tmp
+	ln -s var/tmp ${D}/tmp
+}
+
+
 PACKAGES = "${PN}-dbg ${PN}-doc ${PN}"
 FILES_${PN} = "/*"
 FILES_${PN}-doc = "${docdir} ${datadir}/common-licenses"
-- 
1.5.6.5





^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH 3/5] netbase: add tb5200l specific /etc/network/interfaces
  2010-04-16 16:49 support for TQ tb5200l Vitus Jensen
  2010-04-16 16:51 ` [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox' Vitus Jensen
  2010-04-16 16:52 ` [PATCH 2/5] base-files: tb5200l specific changes Vitus Jensen
@ 2010-04-16 16:53 ` Vitus Jensen
  2010-04-18  9:12   ` Marco Cavallini
  2010-04-16 16:54 ` [PATCH 4/5] linux_2.6.32: add tb5200l support Vitus Jensen
  2010-04-16 16:55 ` [PATCH 5/5] linux_2.6.33: add recipe Vitus Jensen
  4 siblings, 1 reply; 13+ messages in thread
From: Vitus Jensen @ 2010-04-16 16:53 UTC (permalink / raw)
  To: openembedded-devel

* eth0, usb for host connectivity
* can0, can1 to control CAN devices

Signed-off-by: Vitus Jensen <vjensen@gmx.de>
---
 recipes/netbase/netbase/tb5200l/interfaces |   33 ++++++++++++++++++++++++++++
 1 files changed, 33 insertions(+), 0 deletions(-)
 create mode 100644 recipes/netbase/netbase/tb5200l/interfaces

diff --git a/recipes/netbase/netbase/tb5200l/interfaces b/recipes/netbase/netbase/tb5200l/interfaces
new file mode 100644
index 0000000..9b27ef0
--- /dev/null
+++ b/recipes/netbase/netbase/tb5200l/interfaces
@@ -0,0 +1,33 @@
+# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
+
+# The loopback interface
+auto lo
+iface lo inet loopback
+
+
+# Wired ethernet interface of "tiny box"
+auto eth0
+iface eth0 inet dhcp
+
+
+# Ethernet/RNDIS gadget (g_ether)
+# ... or on host side, usbnet and random hwaddr
+iface usb0 inet static
+	address 192.168.0.202
+	netmask 255.255.255.0
+	network 192.168.0.0
+	gateway 192.168.0.200
+
+# CAN interfaces
+auto can0
+iface can0 inet manual
+	pre-up ip link set $IFACE type can bitrate 125000 listen-only off
+	up /sbin/ifconfig $IFACE up
+	down /sbin/ifconfig $IFACE down
+
+auto can1
+iface can1 inet manual
+	pre-up ip link set $IFACE type can bitrate 125000 listen-only off
+	up /sbin/ifconfig $IFACE up
+	down /sbin/ifconfig $IFACE down
+
-- 
1.5.6.5




^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH 4/5] linux_2.6.32: add tb5200l support
  2010-04-16 16:49 support for TQ tb5200l Vitus Jensen
                   ` (2 preceding siblings ...)
  2010-04-16 16:53 ` [PATCH 3/5] netbase: add tb5200l specific /etc/network/interfaces Vitus Jensen
@ 2010-04-16 16:54 ` Vitus Jensen
  2010-04-18  9:09   ` Marco Cavallini
  2010-04-16 16:55 ` [PATCH 5/5] linux_2.6.33: add recipe Vitus Jensen
  4 siblings, 1 reply; 13+ messages in thread
From: Vitus Jensen @ 2010-04-16 16:54 UTC (permalink / raw)
  To: openembedded-devel

[PATCH 4/5] linux_2.6.32: add tb5200l support

Signed-off-by: Vitus Jensen <vjensen@gmx.de>
---
 recipes/linux/linux_2.6.32.bb   |    1 +
 recipes/linux/tb5200l/defconfig | 1436 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 1437 insertions(+), 0 deletions(-)
 create mode 100644 recipes/linux/tb5200l/defconfig

diff --git a/recipes/linux/linux_2.6.32.bb b/recipes/linux/linux_2.6.32.bb
index 7f2ef0a..85710ac 100644
--- a/recipes/linux/linux_2.6.32.bb
+++ b/recipes/linux/linux_2.6.32.bb
@@ -7,6 +7,7 @@ S = "${WORKDIR}/linux-${PV}"
 # Mark archs/machines that this kernel supports
 DEFAULT_PREFERENCE = "-1"
 DEFAULT_PREFERENCE_simone = "1"
+DEFAULT_PREFERENCE_tb5200l = "1"

 SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
            file://defconfig"
diff --git a/recipes/linux/tb5200l/defconfig b/recipes/linux/tb5200l/defconfig
new file mode 100644
index 0000000..a2f6c57
--- /dev/null
+++ b/recipes/linux/tb5200l/defconfig
@@ -0,0 +1,1436 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 01:57:49 2010
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_PPC_BOOK3S_32=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_NR_IRQS=512
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_MPC5200_LPBFIFO=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=y
+CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_PPC_BESTCOMM_GEN_BD=y
+CONFIG_SIMPLE_GPIO=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_MAX_ACTIVE_REGIONS=32
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+CONFIG_CAN_DEV=y
+CONFIG_CAN_CALC_BITTIMING=y
+CONFIG_CAN_MSCAN=y
+CONFIG_CAN_MPC5XXX=y
+# CONFIG_CAN_SJA1000 is not set
+
+#
+# CAN USB interfaces
+#
+# CONFIG_CAN_EMS_USB is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_PCMCIA is not set
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_MD is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC_MPC52xx=y
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_MPC5200_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_GENERIC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
-- 
1.5.6.5




^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH 5/5] linux_2.6.33: add recipe
  2010-04-16 16:49 support for TQ tb5200l Vitus Jensen
                   ` (3 preceding siblings ...)
  2010-04-16 16:54 ` [PATCH 4/5] linux_2.6.32: add tb5200l support Vitus Jensen
@ 2010-04-16 16:55 ` Vitus Jensen
  4 siblings, 0 replies; 13+ messages in thread
From: Vitus Jensen @ 2010-04-16 16:55 UTC (permalink / raw)
  To: openembedded-devel

Adds recipe for 2.6.33 which contains some CAN-related changes
which are usefull for tb5200l.

Signed-off-by: Vitus Jensen <vjensen@gmx.de>
---
 recipes/linux/linux_2.6.33.bb |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)
 create mode 100644 recipes/linux/linux_2.6.33.bb

diff --git a/recipes/linux/linux_2.6.33.bb b/recipes/linux/linux_2.6.33.bb
new file mode 100644
index 0000000..0e1d3c7
--- /dev/null
+++ b/recipes/linux/linux_2.6.33.bb
@@ -0,0 +1,15 @@
+require linux.inc
+
+PR = "r0"
+
+S = "${WORKDIR}/linux-${PV}"
+
+# Mark archs/machines that this kernel supports
+DEFAULT_PREFERENCE = "-1"
+DEFAULT_PREFERENCE_tb5200l = "1"
+
+SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
+	file://defconfig"
+
+SRC_URI[kernel.md5sum] = "d6249654087f0bcafaa860ac573316a4"
+SRC_URI[kernel.sha256sum] = "91806347cb386002a8bfd20ee66e536e4a7dfb01f207dd751341f2971090d9ac"
-- 
1.5.6.5




^ permalink raw reply related	[flat|nested] 13+ messages in thread

* Re: [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox'
  2010-04-16 16:51 ` [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox' Vitus Jensen
@ 2010-04-18  8:19   ` Marco Cavallini
  0 siblings, 0 replies; 13+ messages in thread
From: Marco Cavallini @ 2010-04-18  8:19 UTC (permalink / raw)
  To: openembedded-devel

Vitus Jensen ha scritto, Il 16/04/2010 18:51:
> [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox'
> 
> Signed-off-by: Vitus Jensen <vjensen@gmx.de>
> ---
>  conf/machine/tb5200l.conf |   28 ++++++++++++++++++++++++++++
>  1 files changed, 28 insertions(+), 0 deletions(-)
>  create mode 100644 conf/machine/tb5200l.conf
> 
> diff --git a/conf/machine/tb5200l.conf b/conf/machine/tb5200l.conf
> new file mode 100644
> index 0000000..5601397
> --- /dev/null
> +++ b/conf/machine/tb5200l.conf
> @@ -0,0 +1,28 @@
> +#@TYPE: Machine
> +#@NAME: TQ Components' Tiny Box TB5200L
> +#@DESCRIPTION: Mini industrial control
> +
> +TARGET_ARCH = "powerpc"
> +PACKAGE_EXTRA_ARCHS = "ppc"
> +
> +MACHINE_FEATURES                = "kernel26 usbhost ext2"
> +MACHINE_TASK_PROVIDER           = "task-base"
> +MACHINE_EXTRA_RRECOMMENDS       = "u-boot-utils iproute2 canutils"
> +
> +USE_DEVFS = "0"
> +
> +PREFERRED_PROVIDER_virtual/kernel = "linux"
> +PREFERRED_VERSION_linux = "2.6.32"
> +PREFERRED_VERSION_linux-libc-headers = "2.6.32"
> +
> +# don't try to access tty1 (used for application code)
> +USE_VT = "0"
> +
> +SERIAL_CONSOLE = "115200 ttyPSC0"
> +KERNEL_DEVICETREE_tb5200l = "arch/${ARCH}/boot/dts/tqm5200.dts"
> +EXTRA_IMAGECMD_jffs2 = "--big-endian -e 0x20000"
> +
> +# TB5200L carries kernel in separate flash partition
> +ROOTFS_POSTPROCESS_COMMAND += "rm -f ${IMAGE_ROOTFS}/boot/*Image*"
> +
> +require conf/machine/include/tune-ppc603e.inc


Acked-by: Marco Cavallini <m.cavallini@koansoftware.com>


Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
   Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com
        http://www.KaeilOS.com




^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 4/5] linux_2.6.32: add tb5200l support
  2010-04-16 16:54 ` [PATCH 4/5] linux_2.6.32: add tb5200l support Vitus Jensen
@ 2010-04-18  9:09   ` Marco Cavallini
  2010-04-19 11:58     ` Vitus Jensen
  0 siblings, 1 reply; 13+ messages in thread
From: Marco Cavallini @ 2010-04-18  9:09 UTC (permalink / raw)
  To: openembedded-devel

Vitus Jensen ha scritto, Il 16/04/2010 18:54:
> [PATCH 4/5] linux_2.6.32: add tb5200l support
> 
> Signed-off-by: Vitus Jensen <vjensen@gmx.de>
> ---
>  recipes/linux/linux_2.6.32.bb   |    1 +
>  recipes/linux/tb5200l/defconfig | 1436 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 1437 insertions(+), 0 deletions(-)
>  create mode 100644 recipes/linux/tb5200l/defconfig
> 
> diff --git a/recipes/linux/linux_2.6.32.bb b/recipes/linux/linux_2.6.32.bb
> index 7f2ef0a..85710ac 100644
> --- a/recipes/linux/linux_2.6.32.bb
> +++ b/recipes/linux/linux_2.6.32.bb
> @@ -7,6 +7,7 @@ S = "${WORKDIR}/linux-${PV}"
>  # Mark archs/machines that this kernel supports
>  DEFAULT_PREFERENCE = "-1"
>  DEFAULT_PREFERENCE_simone = "1"
> +DEFAULT_PREFERENCE_tb5200l = "1"
> 
>  SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
>             file://defconfig"


The /linux/linux_2.6.32.bb part of this patch doesn't apply and it is
composed by two files, next time submit each file in a single patch,
moreover you forgot to bump PR.

Please correct and resubmit.


Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/5] base-files: tb5200l specific changes
  2010-04-16 16:52 ` [PATCH 2/5] base-files: tb5200l specific changes Vitus Jensen
@ 2010-04-18  9:11   ` Marco Cavallini
  2010-04-18 10:50   ` Koen Kooi
  1 sibling, 0 replies; 13+ messages in thread
From: Marco Cavallini @ 2010-04-18  9:11 UTC (permalink / raw)
  To: openembedded-devel

Vitus Jensen ha scritto, Il 16/04/2010 18:52:
> * create /opt directory
> * fstab which mounts / and /opt from jffs2 filesystem on mtd
> * link /tmp to /var/tmp
> * issue and issue.net
> 
> Signed-off-by: Vitus Jensen <vjensen@gmx.de>
> ---
>  recipes/base-files/base-files/tb5200l/fstab     |   10 ++++++++++
>  recipes/base-files/base-files/tb5200l/issue     |    2 ++
>  recipes/base-files/base-files/tb5200l/issue.net |    3 +++
>  recipes/base-files/base-files_3.0.14.bb         |    8 +++++++-
>  4 files changed, 22 insertions(+), 1 deletions(-)
>  create mode 100644 recipes/base-files/base-files/tb5200l/fstab
>  create mode 100644 recipes/base-files/base-files/tb5200l/issue
>  create mode 100644 recipes/base-files/base-files/tb5200l/issue.net
> 
> diff --git a/recipes/base-files/base-files/tb5200l/fstab b/recipes/base-files/base-files/tb5200l/fstab
> new file mode 100644
> index 0000000..38de296
> --- /dev/null
> +++ b/recipes/base-files/base-files/tb5200l/fstab
> @@ -0,0 +1,10 @@
> +# tb5200l filesystem, mount / read-only, mount /opt read-write
> +
> +rootfs		/		jffs2		defaults		1  1
> +/dev/mtdblock4 	/opt 		jffs2		defaults		0  0
> +proc 		/proc 		proc		defaults		0  0
> +devpts 		/dev/pts 	devpts		mode=0620,gid=5		0  0
> +usbfs 		/proc/bus/usb 	usbfs		defaults		0  0
> +tmpfs 		/var/volatile 	tmpfs		defaults		0  0
> +tmpfs 		/dev/shm 	tmpfs		mode=0777		0  0
> +tmpfs 		/media/ram 	tmpfs		defaults		0  0
> diff --git a/recipes/base-files/base-files/tb5200l/issue b/recipes/base-files/base-files/tb5200l/issue
> new file mode 100644
> index 0000000..5f4ee1f
> --- /dev/null
> +++ b/recipes/base-files/base-files/tb5200l/issue
> @@ -0,0 +1,2 @@
> +Cameron Linux \n \l
> +
> diff --git a/recipes/base-files/base-files/tb5200l/issue.net b/recipes/base-files/base-files/tb5200l/issue.net
> new file mode 100644
> index 0000000..b5cefd4
> --- /dev/null
> +++ b/recipes/base-files/base-files/tb5200l/issue.net
> @@ -0,0 +1,3 @@
> +Cameron Linux %h
> +
> +
> diff --git a/recipes/base-files/base-files_3.0.14.bb b/recipes/base-files/base-files_3.0.14.bb
> index 483aef7..e341adc 100644
> --- a/recipes/base-files/base-files_3.0.14.bb
> +++ b/recipes/base-files/base-files_3.0.14.bb
> @@ -42,7 +42,7 @@ dirs755 = "/bin /boot /dev ${sysconfdir} ${sysconfdir}/default \
>  	   ${localstatedir}/volatile/lock/subsys \
>  	   ${localstatedir}/volatile/log \
>  	   ${localstatedir}/volatile/run \
> -	   /mnt /media /media/card /media/cf /media/net /media/ram \
> +	   /opt /mnt /media /media/card /media/cf /media/net /media/ram \
>  	   /media/union /media/realroot /media/hdd \
>  	   /media/mmc1"
> 
> @@ -157,6 +157,12 @@ do_install_append_netbook-pro () {
>  	mkdir -p ${D}/initrd
>  }
> 
> +do_install_append_tb5200l() {
> +	rmdir ${D}/tmp
> +	ln -s var/tmp ${D}/tmp
> +}
> +
> +
>  PACKAGES = "${PN}-dbg ${PN}-doc ${PN}"
>  FILES_${PN} = "/*"
>  FILES_${PN}-doc = "${docdir} ${datadir}/common-licenses"


Acked-by: Marco Cavallini <m.cavallini@koansoftware.com>


Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
   Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com
        http://www.KaeilOS.com




^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 3/5] netbase: add tb5200l specific /etc/network/interfaces
  2010-04-16 16:53 ` [PATCH 3/5] netbase: add tb5200l specific /etc/network/interfaces Vitus Jensen
@ 2010-04-18  9:12   ` Marco Cavallini
  0 siblings, 0 replies; 13+ messages in thread
From: Marco Cavallini @ 2010-04-18  9:12 UTC (permalink / raw)
  To: openembedded-devel

Vitus Jensen ha scritto, Il 16/04/2010 18:53:
> * eth0, usb for host connectivity
> * can0, can1 to control CAN devices
> 
> Signed-off-by: Vitus Jensen <vjensen@gmx.de>
> ---
>  recipes/netbase/netbase/tb5200l/interfaces |   33 ++++++++++++++++++++++++++++
>  1 files changed, 33 insertions(+), 0 deletions(-)
>  create mode 100644 recipes/netbase/netbase/tb5200l/interfaces
> 
> diff --git a/recipes/netbase/netbase/tb5200l/interfaces b/recipes/netbase/netbase/tb5200l/interfaces
> new file mode 100644
> index 0000000..9b27ef0
> --- /dev/null
> +++ b/recipes/netbase/netbase/tb5200l/interfaces
> @@ -0,0 +1,33 @@
> +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
> +
> +# The loopback interface
> +auto lo
> +iface lo inet loopback
> +
> +
> +# Wired ethernet interface of "tiny box"
> +auto eth0
> +iface eth0 inet dhcp
> +
> +
> +# Ethernet/RNDIS gadget (g_ether)
> +# ... or on host side, usbnet and random hwaddr
> +iface usb0 inet static
> +	address 192.168.0.202
> +	netmask 255.255.255.0
> +	network 192.168.0.0
> +	gateway 192.168.0.200
> +
> +# CAN interfaces
> +auto can0
> +iface can0 inet manual
> +	pre-up ip link set $IFACE type can bitrate 125000 listen-only off
> +	up /sbin/ifconfig $IFACE up
> +	down /sbin/ifconfig $IFACE down
> +
> +auto can1
> +iface can1 inet manual
> +	pre-up ip link set $IFACE type can bitrate 125000 listen-only off
> +	up /sbin/ifconfig $IFACE up
> +	down /sbin/ifconfig $IFACE down
> +


Acked-by: Marco Cavallini <m.cavallini@koansoftware.com>


Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini | KOAN sas | Bergamo - Italia
 embedded and real-time software engineering
   Atmel third party certified consultant
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
      http://www.KoanSoftware.com
        http://www.KaeilOS.com



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/5] base-files: tb5200l specific changes
  2010-04-16 16:52 ` [PATCH 2/5] base-files: tb5200l specific changes Vitus Jensen
  2010-04-18  9:11   ` Marco Cavallini
@ 2010-04-18 10:50   ` Koen Kooi
  2010-04-19 11:37     ` Vitus Jensen
  1 sibling, 1 reply; 13+ messages in thread
From: Koen Kooi @ 2010-04-18 10:50 UTC (permalink / raw)
  To: openembedded-devel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 16-04-10 18:52, Vitus Jensen wrote:
> * create /opt directory

> +++ b/recipes/base-files/base-files_3.0.14.bb

> -	   /mnt /media /media/card /media/cf /media/net /media/ram \
> +	   /opt /mnt /media /media/card /media/cf /media/net /media/ram \

NACK!

/opt will automatically get created when a package gets installed to it,
so base-files is the wrong place to create it.
Using /opt is almost as bad as poking at $HOME from inside packages...

regards,

Koen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)

iD8DBQFLyuQNMkyGM64RGpERAlkFAJwPvhWmX6Kv6dziLxTZ/rFb0z3f5ACgl21t
rIzVxHylc3vfpiV+XyebK2o=
=oGck
-----END PGP SIGNATURE-----




^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 2/5] base-files: tb5200l specific changes
  2010-04-18 10:50   ` Koen Kooi
@ 2010-04-19 11:37     ` Vitus Jensen
  0 siblings, 0 replies; 13+ messages in thread
From: Vitus Jensen @ 2010-04-19 11:37 UTC (permalink / raw)
  To: openembedded-devel

On Sun, 18 Apr 2010, Koen Kooi wrote:

> On 16-04-10 18:52, Vitus Jensen wrote:
>> * create /opt directory
>
>> +++ b/recipes/base-files/base-files_3.0.14.bb
>
>> -	   /mnt /media /media/card /media/cf /media/net /media/ram \
>> +	   /opt /mnt /media /media/card /media/cf /media/net /media/ram \
>
> NACK!
>
> /opt will automatically get created when a package gets installed to it,
> so base-files is the wrong place to create it.
> Using /opt is almost as bad as poking at $HOME from inside packages...

I would like to mount the second half of internal flash to /opt, so that 
packages which install there actually have a enough room.  See fstab 
contained in the patch.

Do you propose another directory?  I've found no free directory in 
the list created by base-files.  If this is considered a local issue I 
will move the changes in our local overlay and remove the patch from the 
list.

Vitus

-- 
Vitus Jensen, Hannover, Germany, Universe (current)
pgp public key available from keyservers



^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH 4/5] linux_2.6.32: add tb5200l support
  2010-04-18  9:09   ` Marco Cavallini
@ 2010-04-19 11:58     ` Vitus Jensen
  0 siblings, 0 replies; 13+ messages in thread
From: Vitus Jensen @ 2010-04-19 11:58 UTC (permalink / raw)
  To: openembedded-devel

On Sun, 18 Apr 2010, Marco Cavallini wrote:

> Vitus Jensen ha scritto, Il 16/04/2010 18:54:
>> [PATCH 4/5] linux_2.6.32: add tb5200l support
>>
>> Signed-off-by: Vitus Jensen <vjensen@gmx.de>
>> ---
>>  recipes/linux/linux_2.6.32.bb   |    1 +
>>  recipes/linux/tb5200l/defconfig | 1436 +++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 1437 insertions(+), 0 deletions(-)
>>  create mode 100644 recipes/linux/tb5200l/defconfig
>>
>> diff --git a/recipes/linux/linux_2.6.32.bb b/recipes/linux/linux_2.6.32.bb
>> index 7f2ef0a..85710ac 100644
>> --- a/recipes/linux/linux_2.6.32.bb
>> +++ b/recipes/linux/linux_2.6.32.bb
>> @@ -7,6 +7,7 @@ S = "${WORKDIR}/linux-${PV}"
>>  # Mark archs/machines that this kernel supports
>>  DEFAULT_PREFERENCE = "-1"
>>  DEFAULT_PREFERENCE_simone = "1"
>> +DEFAULT_PREFERENCE_tb5200l = "1"
>>
>>  SRC_URI = "${KERNELORG_MIRROR}/pub/linux/kernel/v2.6/linux-${PV}.tar.bz2;name=kernel \
>>             file://defconfig"
>
>
> The /linux/linux_2.6.32.bb part of this patch doesn't apply and it is
> composed by two files, next time submit each file in a single patch,
> moreover you forgot to bump PR.
>
> Please correct and resubmit.

OK, will split the patch.

Sorry, had base the patch on old revision and will rebase it.  But do you 
really think it's neccessary to bump PR?  The patch won't change the 
contents of a recreated package, nothing needs to be rebuild, an 
installed package doesn't have to be updated.  So I think it's fine to 
keep PR when adding DEFAULT_PREFERENCE.

Vitus

-- 
Vitus Jensen, Hannover, Germany, Universe (current)
pgp public key available from keyservers



^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2010-04-19 12:00 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-16 16:49 support for TQ tb5200l Vitus Jensen
2010-04-16 16:51 ` [PATCH 1/5] tb5200l: add machine configuration for TQ TB5200L 'tinyBox' Vitus Jensen
2010-04-18  8:19   ` Marco Cavallini
2010-04-16 16:52 ` [PATCH 2/5] base-files: tb5200l specific changes Vitus Jensen
2010-04-18  9:11   ` Marco Cavallini
2010-04-18 10:50   ` Koen Kooi
2010-04-19 11:37     ` Vitus Jensen
2010-04-16 16:53 ` [PATCH 3/5] netbase: add tb5200l specific /etc/network/interfaces Vitus Jensen
2010-04-18  9:12   ` Marco Cavallini
2010-04-16 16:54 ` [PATCH 4/5] linux_2.6.32: add tb5200l support Vitus Jensen
2010-04-18  9:09   ` Marco Cavallini
2010-04-19 11:58     ` Vitus Jensen
2010-04-16 16:55 ` [PATCH 5/5] linux_2.6.33: add recipe Vitus Jensen

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.