All of lore.kernel.org
 help / color / mirror / Atom feed
From: Meelis Roos <mroos@linux.ee>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>,
	linux-pci@vger.kernel.org, sparclinux@vger.kernel.org
Subject: Re: sparc64 PCI BAR allocation is still problematic
Date: Wed, 11 Apr 2018 23:25:06 +0300 (EEST)	[thread overview]
Message-ID: <alpine.LRH.2.21.1804112323170.25495@math.ut.ee> (raw)
In-Reply-To: <20180411200143.GA105104@bhelgaas-glaptop.roam.corp.google.com>

> Thanks, this is really interesting.  Would you mind replacing the test
> patch with the following (this applies directly on the upstream
> kernel, e.g., fd3b36d27566)?
> 
> Sorry for the back and forth, but there's a lot going on here that I
> don't understand.  
> 
> I'd like to see the complete dmesg log, /proc/iomem, and "lspci -vv".

00000000-7effdfff : System RAM
  00404000-0085ab9f : Kernel code
  0085aba0-009b8a8f : Kernel data
  009f2000-00a37a37 : Kernel bss
7f000000-7fee5fff : System RAM
7ff04000-7ff0bfff : System RAM
1ff00000000-1ffffffffff : /pci@1f,0
  1ff00000000-1ff000fffff : 0000:00:07.0
  1ff00400000-1ff0041ffff : 0000:00:0c.1
    1ff00400000-1ff0041ffff : sungem
  1ff00420000-1ff00421fff : 0000:00:0c.2
  1ff00422000-1ff00423fff : 0000:00:0c.2
  1ff00424000-1ff00425fff : 0000:00:08.0
  1ff00426000-1ff00427fff : 0000:00:13.0
  1ff00440000-1ff0045ffff : 0000:00:13.0
  1ff00800000-1ff00bfffff : 0000:00:0c.1
  1ff00c00000-1ff00ffffff : 0000:00:0c.2
  1ff01000000-1ff013fffff : 0000:00:0c.3
  1ff02000000-1ff02ffffff : 0000:00:0c.3
    1ff02000000-1ff02ffffff : ohci_hcd
  1ff03000000-1ff030fffff : PCI Bus 0000:01
    1ff03000000-1ff03001fff : 0000:01:00.0
      1ff03000000-1ff03001fff : sym53c8xx
    1ff03002000-1ff03003fff : 0000:01:02.0
    1ff03010000-1ff0301ffff : 0000:01:02.0
  1ff04000000-1ff04ffffff : 0000:00:13.0
    1ff04000000-1ff04ffffff : atyfb
  1ffc0000000-1ffdfffffff : IOMMU
  1fff1000000-1fff1001fff : eeprom


00:03.0 Non-VGA unclassified device: ULi Electronics Inc. M7101 Power Management Controller [PMU]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: [virtual] I/O ports at <unassigned> [size=16]
	Kernel driver in use: ali1535_smbus
00: b9 10 01 71 00 00 00 02 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 20 00 08 18 08 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 01
70: 0f 11 00 00 00 00 00 08 00 00 00 00 00 00 00 00
80: 00 00 10 10 00 00 00 00 01 04 00 00 00 00 00 00
90: 00 00 02 00 00 00 00 0f 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 40 40 01 00 00 02 00 60 04 01 03 00 00 00 30
c0: 00 10 ff 00 00 00 00 00 01 00 00 00 00 00 00 00
d0: ff 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 08 00 06 01 00 01 00 00 00 00 00 00 00 00 00
f0: 45 00 20 7e 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 03000000-030fffff
	Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+
00: 11 10 24 00 07 00 90 02 03 00 04 06 10 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 11 11 80 02
20: 00 03 00 03 f1 ff 01 00 ff ff ff ff 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 3e 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 01
e0: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
	Subsystem: ULi Electronics Inc. ALi M1533 Aladdin IV/V ISA Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: [virtual] I/O ports at 1fe02000000 [size=64K]
	Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [size=1M]
	Capabilities: [a0] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 33 15
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 11 13 49 80 83 09 00 07 00 00 00 10 00 00 fd 01
50: 00 00 00 40 00 07 02 00 6e 03 09 00 00 00 00 08
60: 00 00 00 00 00 00 00 00 00 00 00 00 80 20 00 00
70: 00 00 06 00 41 03 00 d3 04 02 00 02 00 00 01 10
80: 07 00 33 01 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:08.0 Multimedia audio controller: ULi Electronics Inc. M5451 PCI AC-Link Controller Audio Device (rev 01)
	Subsystem: ULi Electronics Inc. M5451 PCI AC-Link Controller Audio Device
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at 0900 [disabled] [size=256]
	Region 1: Memory at 00424000 (32-bit, non-prefetchable) [disabled] [size=8K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 51 54 00 00 90 02 01 00 01 04 00 40 00 00
10: 01 09 00 00 00 40 42 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 51 54
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 01 02 18
40: 00 00 00 00 00 04 00 e2 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 e6
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 Bridge: Oracle/SUN RIO EBUS (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 6250ns max), Cache Line Size: 64 bytes
	BIST result: 00
	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
	Region 1: Memory at <ignored> (32-bit, non-prefetchable)
00: 8e 10 00 11 46 01 80 02 01 00 80 06 10 40 80 80
10: 00 00 00 f0 00 00 00 f1 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 19
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.1 Ethernet controller: Oracle/SUN RIO 10/100 Ethernet [eri] (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 11
	BIST result: 00
	Region 0: Memory at 00400000 (32-bit, non-prefetchable) [size=128K]
	Expansion ROM at 00800000 [disabled] [size=4M]
	Kernel driver in use: gem
00: 8e 10 01 11 06 00 80 02 01 00 00 02 10 40 80 80
10: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 0a 05
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.2 FireWire (IEEE 1394): Oracle/SUN RIO 1394 (rev 01) (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin ? routed to IRQ 12
	BIST result: 00
	Region 0: Memory at 00420000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at 00422000 (32-bit, non-prefetchable) [size=8K]
	Expansion ROM at 00c00000 [disabled] [size=4M]
00: 8e 10 02 11 02 00 80 02 01 10 00 0c 10 40 80 80
10: 00 00 42 00 00 20 42 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 0a 05
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.3 USB controller: Oracle/SUN RIO USB (rev 01) (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 13
	BIST result: 00
	Region 0: Memory at 02000000 (32-bit, non-prefetchable) [size=16M]
	Expansion ROM at 01000000 [disabled] [size=4M]
	Kernel driver in use: ohci-pci
00: 8e 10 03 11 06 00 80 02 01 10 03 0c 10 40 80 80
10: 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 0a 05
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c3) (prog-if ff)
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 0a00 [size=8]
	Region 1: I/O ports at 0a18 [size=8]
	Region 2: I/O ports at 0a10 [size=8]
	Region 3: I/O ports at 0a08 [size=8]
	Region 4: I/O ports at 0a20 [size=16]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_ali
00: b9 10 29 52 05 00 90 02 c3 ff 01 01 00 40 00 00
10: 01 0a 00 00 19 0a 00 00 11 0a 00 00 09 0a 00 00
20: 21 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 01 02 04
40: 06 00 00 7f 00 00 00 00 00 02 20 c9 00 80 ba 1a
50: 03 00 00 81 08 00 a8 00 01 31 31 31 03 09 0a 0a
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:13.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27) (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at 04000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: I/O ports at 0b00 [size=256]
	Region 2: Memory at 00426000 (32-bit, non-prefetchable) [size=8K]
	Expansion ROM at 00440000 [disabled] [size=128K]
	Capabilities: [5c] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: atyfb
00: 02 10 52 47 83 00 90 02 27 00 00 03 10 40 00 00
10: 00 00 00 04 01 0b 00 00 00 60 42 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 44 00 5c 00 00 00 00 00 00 00 f1 01 08 00
40: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 5c 10 00 01 00 00 ff 00 00 00 00 01 00 02 06
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 16000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 1000 [size=256]
	Region 1: Memory at 03000000 (32-bit, non-prefetchable) [size=8K]
	Kernel driver in use: sym53c8xx
00: 00 10 01 00 17 00 00 02 12 00 00 01 10 40 00 00
10: 01 10 00 00 00 00 00 03 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: da 00 00 03 47 00 06 1f 00 08 00 00 80 00 00 02
90: ff e0 dc c1 00 ff ff ff 00 f0 31 21 a0 13 dd c1
a0: 00 08 00 01 00 00 00 50 c0 13 dd c1 c0 13 dd c1
b0: 00 10 dd c1 38 f0 dc c1 ce 6d 00 a1 c0 23 ba c1
c0: 8f 05 00 00 00 05 40 0f 0c 00 80 0f 07 00 02 80
d0: 00 00 02 80 00 00 02 80 00 00 02 80 00 01 ff 40
e0: 00 01 ff 40 00 01 ff 40 00 01 ff 40 00 01 ff 40
f0: 00 01 ff 40 00 01 ff 40 00 01 ff 40 00 01 ff 40

01:01.0 Multimedia audio controller: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)
	Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 1100 [disabled] [size=256]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: f6 13 11 01 00 00 10 02 10 00 01 04 00 40 00 00
10: 01 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:02.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 03002000 (32-bit, non-prefetchable) [disabled] [size=8K]
	Region 1: Memory at 03010000 (32-bit, non-prefetchable) [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: 13 10 05 60 00 00 10 02 01 00 01 04 00 40 00 00
10: 00 20 00 03 00 00 01 03 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 04 18
40: 01 00 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00
f0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


[    0.000059] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
[    0.000116] PROMLIB: Root node compatible: 
[    0.000217] Linux version 4.16.0-11316-gf77cfbe-dirty (mroos@blade100) (gcc version 4.9.3 (Debian 4.9.3-2)) #168 Wed Apr 11 23:14:41 EEST 2018
[    0.280335] bootconsole [earlyprom0] enabled
[    0.331447] ARCH: SUN4U
[    0.360724] Ethernet address: 00:03:ba:0b:7d:5d
[    0.414898] MM: PAGE_OFFSET is 0xfffff80000000000 (max_phys_bits == 40)
[    0.494057] MM: VMALLOC [0x0000000100000000 --> 0x0000060000000000]
[    0.568973] MM: VMEMMAP [0x0000060000000000 --> 0x00000c0000000000]
[    0.720460] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.797625] Remapping the kernel... 
[    0.798175] done.
[    1.201703] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[    1.270449] PROM: Built device tree with 90708 bytes of memory.
[    1.341590] Top of RAM: 0x7ff0c000, Total RAM: 0x7feec000
[    1.406150] Memory hole size: 0MB
[    1.979239] Allocated 16384 bytes for kernel page tables.
[    2.044448] Zone ranges:
[    2.074793]   Normal   [mem 0x0000000000000000-0x000000007ff0bfff]
[    2.148765] Movable zone start for each node
[    2.199783] Early memory node ranges
[    2.242493]   node   0: [mem 0x0000000000000000-0x000000007effdfff]
[    2.317409]   node   0: [mem 0x000000007f000000-0x000000007fee5fff]
[    2.392326]   node   0: [mem 0x000000007ff04000-0x000000007ff0bfff]
[    2.467248] Initmem setup node 0 [mem 0x0000000000000000-0x000000007ff0bfff]
[    2.551514] On node 0 totalpages: 262006
[    2.551525]   Normal zone: 2048 pages used for memmap
[    2.551530]   Normal zone: 0 pages reserved
[    2.551539]   Normal zone: 262006 pages, LIFO batch:15
[    2.653830] Booting Linux...
[    2.688370] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
[    2.765450] CPU CAPS: [vis]
[    2.804900] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    2.804913] pcpu-alloc: [0] 0 
[    2.807648] Built 1 zonelists, mobility grouping on.  Total pages: 259958
[    2.888901] Kernel command line: root=/dev/sda2 ro console=ttyS0
[    2.974322] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[    3.066836] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[    3.151270] Sorting __ex_table...
[    3.346086] Memory: 2069760K/2096048K available (4442K kernel code, 298K rwdata, 1096K rodata, 200K init, 278K bss, 26288K reserved, 0K cma-reserved)
[    3.506677] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    3.585528] NR_IRQS: 2048, nr_irqs: 2048, preallocated irqs: 1
[    3.655545] clocksource: hbtick: mask: 0xffffffffffffffff max_cycles: 0x148020aa9, max_idle_ns: 440795202069 ns
[    3.776260] clocksource: mult[b400012e] shift[24]
[    3.832470] clockevent: mult[16c16bf] shift[32]
[    3.886908] Console: colour dummy device 80x25
[    4.090118] Calibrating delay using timer specific routine.. 11.12 BogoMIPS (lpj=55648)
[    4.185866] pid_max: default: 32768 minimum: 301
[    4.241727] Mount-cache hash table entries: 4096 (order: 2, 32768 bytes)
[    4.321958] Mountpoint-cache hash table entries: 4096 (order: 2, 32768 bytes)
[    4.411687] devtmpfs: initialized
[    4.456082] random: get_random_u32 called from bucket_table_alloc+0x78/0x1e0 with crng_init=0
[    4.558763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    4.676445] futex hash table entries: 256 (order: -1, 6144 bytes)
[    4.750134] NET: Registered protocol family 16
[    4.812677] IRQ pre handler NOT supported.
[    4.862096] IRQ pre handler NOT supported.
[    4.911395] IRQ pre handler NOT supported.
[    4.961961] audit: initializing netlink subsys (disabled)
[    5.033921] kworker/u2:0 (40) used greatest stack depth: 10304 bytes left
[    5.115934] random: fast init done
[    5.169855] /pci@1f,0: PCI IO [io  0x1fe02000000-0x1fe02ffffff] offset 1fe02000000
[    5.260566] /pci@1f,0: PCI MEM [mem 0x1ff00000000-0x1ffffffffff] offset 1ff00000000
[    5.352239] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[    5.411653] PCI: Scanning PBM /pci@1f,0
[    5.457965] sabre f005f408: PCI host bridge to bus 0000:00
[    5.523589] pci_bus 0000:00: root bus resource [io  0x1fe02000000-0x1fe02ffffff] (bus address [0x0000-0xffffff])
[    5.645351] pci_bus 0000:00: root bus resource [mem 0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff])
[    5.773361] pci_bus 0000:00: root bus resource [bus 00-01]
[    5.839024] PCI: scan_bus[/pci@1f,0] bus no 0
[    5.891179]   * /pci@1f,0/ebus@c
[    5.929908]     create device, devfn: 60, type: 
[    5.985145]     class: 0x68000 device name: 0000:00:0c.0
[    6.048714] pci 0000:00:0c.0: [108e:1100] type 00 class 0x068000
[    6.120606]     adding to system ...
[    6.163761] PCI: dev header type: 0
[    6.205506]   * /pci@1f,0/isa@7
[    6.243152]     create device, devfn: 38, type: 
[    6.298419]     class: 0x60100 device name: 0000:00:07.0
[    6.361991] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[    6.433890]     parse addresses (40 bytes) @         (ptrval)
[    6.502673]   start: 1fe02000000, end: 1fe0200ffff, i: 10
[    6.567309] pci 0000:00:07.0: reg 0x10: [io  0x1fe02000000-0x1fe0200ffff]
[    6.648557]   start: 1ff00000000, end: 1ff000fffff, i: 14
[    6.713192] pci 0000:00:07.0: reg 0x14: [mem 0x1ff00000000-0x1ff000fffff]
[    6.794436]     adding to system ...
[    6.837517] PCI: dev header type: 0
[    6.879234]   * /pci@1f,0/pmu@3
[    6.916881]     create device, devfn: 18, type: 
[    6.972141]     class: 0x0 device name: 0000:00:03.0
[    7.031563] pci 0000:00:03.0: [10b9:7101] type 00 class 0x000000
[    7.103460]     parse addresses (20 bytes) @         (ptrval)
[    7.172245]   start: 1fe02000000, end: 1fe0200000f, i: 10
[    7.236882] pci 0000:00:03.0: reg 0x10: [io  0x1fe02000000-0x1fe0200000f]
[    7.318126]     adding to system ...
[    7.360970] pci 0000:00:03.0: quirk: [io  0x1fe02000800-0x1fe0200083f] claimed by ali7101 ACPI
[    7.464025] pci 0000:00:03.0: quirk: [io  0x1fe02000600-0x1fe0200061f] claimed by ali7101 SMB
[    7.566080] pci 0000:00:03.0: quirk_ali7101_acpi+0x0/0x40 took 19531 usecs
[    7.648616] PCI: dev header type: 0
[    7.690327]   * /pci@1f,0/network@c,1
[    7.734236]     create device, devfn: 61, type: network
[    7.796750]     class: 0x20000 device name: 0000:00:0c.1
[    7.860324] pci 0000:00:0c.1: [108e:1101] type 00 class 0x020000
[    7.932219]     parse addresses (40 bytes) @         (ptrval)
[    8.001003]   start: 1ff00400000, end: 1ff0041ffff, i: 10
[    8.065640] pci 0000:00:0c.1: reg 0x10: [mem 0x1ff00400000-0x1ff0041ffff]
[    8.146887]   start: 1ff00800000, end: 1ff00bfffff, i: 30
[    8.211522] pci 0000:00:0c.1: reg 0x30: [mem 0x1ff00800000-0x1ff00bfffff]
[    8.292769]     adding to system ...
[    8.335825] PCI: dev header type: 0
[    8.377569]   * /pci@1f,0/firewire@c,2
[    8.422489]     create device, devfn: 62, type: 
[    8.477747]     class: 0xc0010 device name: 0000:00:0c.2
[    8.541326] pci 0000:00:0c.2: [108e:1102] type 00 class 0x0c0010
[    8.613221]     parse addresses (60 bytes) @         (ptrval)
[    8.682007]   start: 1ff00420000, end: 1ff00421fff, i: 10
[    8.746642] pci 0000:00:0c.2: reg 0x10: [mem 0x1ff00420000-0x1ff00421fff]
[    8.827891]   start: 1ff00422000, end: 1ff00423fff, i: 14
[    8.892525] pci 0000:00:0c.2: reg 0x14: [mem 0x1ff00422000-0x1ff00423fff]
[    8.973775]   start: 1ff00c00000, end: 1ff00ffffff, i: 30
[    9.038411] pci 0000:00:0c.2: reg 0x30: [mem 0x1ff00c00000-0x1ff00ffffff]
[    9.119656]     adding to system ...
[    9.162736] PCI: dev header type: 0
[    9.204457]   * /pci@1f,0/usb@c,3
[    9.244184]     create device, devfn: 63, type: 
[    9.299439]     class: 0xc0310 device name: 0000:00:0c.3
[    9.363017] pci 0000:00:0c.3: [108e:1103] type 00 class 0x0c0310
[    9.434913]     parse addresses (40 bytes) @         (ptrval)
[    9.503701]   start: 1ff02000000, end: 1ff02ffffff, i: 10
[    9.568334] pci 0000:00:0c.3: reg 0x10: [mem 0x1ff02000000-0x1ff02ffffff]
[    9.649582]   start: 1ff01000000, end: 1ff013fffff, i: 30
[    9.714218] pci 0000:00:0c.3: reg 0x30: [mem 0x1ff01000000-0x1ff013fffff]
[    9.795464]     adding to system ...
[    9.838518] PCI: dev header type: 0
[    9.880258]   * /pci@1f,0/sound@8
[    9.919990]     create device, devfn: 40, type: 
[    9.975250]     class: 0x40100 device name: 0000:00:08.0
[   10.038823] pci 0000:00:08.0: [10b9:5451] type 00 class 0x040100
[   10.110721]     parse addresses (40 bytes) @         (ptrval)
[   10.179506]   start: 1fe02000900, end: 1fe020009ff, i: 10
[   10.244142] pci 0000:00:08.0: reg 0x10: [io  0x1fe02000900-0x1fe020009ff]
[   10.325391]   start: 1ff00424000, end: 1ff00425fff, i: 14
[   10.390026] pci 0000:00:08.0: reg 0x14: [mem 0x1ff00424000-0x1ff00425fff]
[   10.471271]     adding to system ...
[   10.514119] pci 0000:00:08.0: supports D1 D2
[   10.514131] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[   10.514430] PCI: dev header type: 0
[   10.556172]   * /pci@1f,0/ide@d
[   10.593822]     create device, devfn: 68, type: ide
[   10.652205]     class: 0x101ff device name: 0000:00:0d.0
[   10.715780] pci 0000:00:0d.0: [10b9:5229] type 00 class 0x0101ff
[   10.787672]     parse addresses (100 bytes) @         (ptrval)
[   10.857495]   start: 1fe02000a00, end: 1fe02000a07, i: 10
[   10.922130] pci 0000:00:0d.0: reg 0x10: [io  0x1fe02000a00-0x1fe02000a07]
[   11.003380]   start: 1fe02000a18, end: 1fe02000a1f, i: 14
[   11.068016] pci 0000:00:0d.0: reg 0x14: [io  0x1fe02000a18-0x1fe02000a1f]
[   11.149264]   start: 1fe02000a10, end: 1fe02000a17, i: 18
[   11.213900] pci 0000:00:0d.0: reg 0x18: [io  0x1fe02000a10-0x1fe02000a17]
[   11.295150]   start: 1fe02000a08, end: 1fe02000a0f, i: 1c
[   11.359785] pci 0000:00:0d.0: reg 0x1c: [io  0x1fe02000a08-0x1fe02000a0f]
[   11.441033]   start: 1fe02000a20, end: 1fe02000a2f, i: 20
[   11.505669] pci 0000:00:0d.0: reg 0x20: [io  0x1fe02000a20-0x1fe02000a2f]
[   11.586915]     adding to system ...
[   11.629978] PCI: dev header type: 0
[   11.671708]   * /pci@1f,0/pci@5
[   11.709365]     create device, devfn: 28, type: pci
[   11.767742]     class: 0x60400 device name: 0000:00:05.0
[   11.831315] pci 0000:00:05.0: [1011:0024] type 01 class 0x060400
[   11.903210]     adding to system ...
[   11.946311] PCI: dev header type: 1
[   11.988001] of_scan_pci_bridge(/pci@1f,0/pci@5)
[   12.042236]     Bridge bus range [1 --> 1]
[   12.091470]     Bridge ranges[        (ptrval)] simba[0]
[   12.154985]     RAW Range[81000000:00000000:00001000:81000000:00000000:00001000:00000000:00001000]
[   12.262208]       Using flags[00000101] start[0000000000001000] size[0000000000001000]
[   12.356975]     RAW Range[82000000:00000000:03000000:82000000:00000000:03000000:00000000:00100000]
[   12.464201]       Using flags[00000200] start[0000000003000000] size[0000000000100000]
[   12.558963]     bus name: PCI Bus 0000:01
[   12.606967] PCI: scan_bus[/pci@1f,0/pci@5] bus no 1
[   12.665361]   * /pci@1f,0/pci@5/scsi@0
[   12.710304]     create device, devfn: 0, type: 
[   12.764510]     class: 0x10000 device name: 0000:01:00.0
[   12.828090] pci 0000:01:00.0: [1000:0001] type 00 class 0x010000
[   12.899985]     parse addresses (40 bytes) @         (ptrval)
[   12.968770]   start: 1fe02001000, end: 1fe020010ff, i: 10
[   13.033408] pci 0000:01:00.0: reg 0x10: [io  0x1fe02001000-0x1fe020010ff]
[   13.114655]   start: 1ff03000000, end: 1ff03001fff, i: 14
[   13.179290] pci 0000:01:00.0: reg 0x14: [mem 0x1ff03000000-0x1ff03001fff]
[   13.260537]     adding to system ...
[   13.303636] PCI: dev header type: 0
[   13.345332]   * /pci@1f,0/pci@5/sound@1
[   13.391308]     create device, devfn: 8, type: 
[   13.445520]     class: 0x40100 device name: 0000:01:01.0
[   13.509093] pci 0000:01:01.0: [13f6:0111] type 00 class 0x040100
[   13.580989]     parse addresses (20 bytes) @         (ptrval)
[   13.649773]   start: 1fe02001100, end: 1fe020011ff, i: 10
[   13.714410] pci 0000:01:01.0: reg 0x10: [io  0x1fe02001100-0x1fe020011ff]
[   13.795654]     adding to system ...
[   13.838512] pci 0000:01:01.0: supports D1 D2
[   13.838755] PCI: dev header type: 0
[   13.880452]   * /pci@1f,0/pci@5/sound@2
[   13.926429]     create device, devfn: 10, type: 
[   13.981678]     class: 0x40100 device name: 0000:01:02.0
[   14.045249] pci 0000:01:02.0: [1013:6005] type 00 class 0x040100
[   14.117146]     parse addresses (40 bytes) @         (ptrval)
[   14.185931]   start: 1ff03002000, end: 1ff03003fff, i: 10
[   14.250568] pci 0000:01:02.0: reg 0x10: [mem 0x1ff03002000-0x1ff03003fff]
[   14.331816]   start: 1ff03010000, end: 1ff0301ffff, i: 14
[   14.396450] pci 0000:01:02.0: reg 0x14: [mem 0x1ff03010000-0x1ff0301ffff]
[   14.477696]     adding to system ...
[   14.520555] pci 0000:01:02.0: supports D1 D2
[   14.520565] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot
[   14.520870] PCI: dev header type: 0
[   14.562597]   * /pci@1f,0/SUNW,m64B@13
[   14.607528]     create device, devfn: 98, type: display
[   14.670066]     class: 0x30000 device name: 0000:00:13.0
[   14.733629] pci 0000:00:13.0: [1002:4752] type 00 class 0x030000
[   14.805526]     parse addresses (80 bytes) @         (ptrval)
[   14.874311]   start: 1ff04000000, end: 1ff04ffffff, i: 10
[   14.938947] pci 0000:00:13.0: reg 0x10: [mem 0x1ff04000000-0x1ff04ffffff]
[   15.020197]   start: 1fe02000b00, end: 1fe02000bff, i: 14
[   15.084831] pci 0000:00:13.0: reg 0x14: [io  0x1fe02000b00-0x1fe02000bff]
[   15.166080]   start: 1ff00426000, end: 1ff00427fff, i: 18
[   15.230717] pci 0000:00:13.0: reg 0x18: [mem 0x1ff00426000-0x1ff00427fff]
[   15.311966]   start: 1ff00440000, end: 1ff0045ffff, i: 30
[   15.376601] pci 0000:00:13.0: reg 0x30: [mem 0x1ff00440000-0x1ff0045ffff]
[   15.457846]     adding to system ...
[   15.500698] pci 0000:00:13.0: supports D1 D2
[   15.500959] PCI: dev header type: 0
[   15.542832] pci 0000:00:0c.0: class 0x68000
[   15.592936] PCI: Claiming 0000:00:07.0: Resource 0: 000001fe02000000..000001fe0200ffff [101]
[   15.693943] pci 0000:00:07.0: can't claim BAR 0 [io  0x1fe02000000-0x1fe0200ffff]: address conflict with 0000:00:03.0 [io  0x1fe02000600-0x1fe0200061f]
[   15.856232] PCI: Claiming 0000:00:07.0: Resource 1: 000001ff00000000..000001ff000fffff [200]
[   15.957232] pci 0000:00:07.0: class 0x60100
[   16.007314] PCI: Claiming 0000:00:03.0: Resource 0: 000001fe02000000..000001fe0200000f [101]
[   16.108310] pci 0000:00:03.0: class 0x0
[   16.154234] PCI: Claiming 0000:00:0c.1: Resource 0: 000001ff00400000..000001ff0041ffff [200]
[   16.255231] PCI: Claiming 0000:00:0c.1: Resource 6: 000001ff00800000..000001ff00bfffff [44200]
[   16.358309] pci 0000:00:0c.1: class 0x20000
[   16.408389] PCI: Claiming 0000:00:0c.2: Resource 0: 000001ff00420000..000001ff00421fff [200]
[   16.509387] PCI: Claiming 0000:00:0c.2: Resource 1: 000001ff00422000..000001ff00423fff [200]
[   16.610384] PCI: Claiming 0000:00:0c.2: Resource 6: 000001ff00c00000..000001ff00ffffff [44200]
[   16.713462] pci 0000:00:0c.2: class 0xc0010
[   16.763541] PCI: Claiming 0000:00:0c.3: Resource 0: 000001ff02000000..000001ff02ffffff [200]
[   16.864540] PCI: Claiming 0000:00:0c.3: Resource 6: 000001ff01000000..000001ff013fffff [44200]
[   16.967617] pci 0000:00:0c.3: class 0xc0310
[   17.017696] PCI: Claiming 0000:00:08.0: Resource 0: 000001fe02000900..000001fe020009ff [101]
[   17.118693] PCI: Claiming 0000:00:08.0: Resource 1: 000001ff00424000..000001ff00425fff [200]
[   17.219694] pci 0000:00:08.0: class 0x40100
[   17.269774] PCI: Claiming 0000:00:0d.0: Resource 0: 000001fe02000a00..000001fe02000a07 [101]
[   17.370772] PCI: Claiming 0000:00:0d.0: Resource 1: 000001fe02000a18..000001fe02000a1f [101]
[   17.471768] PCI: Claiming 0000:00:0d.0: Resource 2: 000001fe02000a10..000001fe02000a17 [101]
[   17.572766] PCI: Claiming 0000:00:0d.0: Resource 3: 000001fe02000a08..000001fe02000a0f [101]
[   17.673762] PCI: Claiming 0000:00:0d.0: Resource 4: 000001fe02000a20..000001fe02000a2f [101]
[   17.774763] pci 0000:00:0d.0: class 0x101ff
[   17.824843] PCI: Claiming 0000:00:05.0: Resource 7: 000001fe02001000..000001fe02001fff [101]
[   17.925839] PCI: Claiming 0000:00:05.0: Resource 8: 000001ff03000000..000001ff030fffff [200]
[   18.026838] pci 0000:00:05.0: class 0x60400
[   18.076919] PCI: Claiming 0000:00:13.0: Resource 0: 000001ff04000000..000001ff04ffffff [200]
[   18.177916] PCI: Claiming 0000:00:13.0: Resource 1: 000001fe02000b00..000001fe02000bff [101]
[   18.278914] PCI: Claiming 0000:00:13.0: Resource 2: 000001ff00426000..000001ff00427fff [200]
[   18.379910] PCI: Claiming 0000:00:13.0: Resource 6: 000001ff00440000..000001ff0045ffff [44200]
[   18.482987] pci 0000:00:13.0: class 0x30000
[   18.533079] pci 0000:00:13.0: requesting [mem 0x1ff000a0000-0x1ff000bffff] from /pci@1f,0 [mem 0x1ff00000000-0x1ffffffffff]
[   18.666284] pci 0000:00:13.0: can't claim VGA legacy [mem 0x1ff000a0000-0x1ff000bffff]: address conflict with 0000:00:07.0 [mem 0x1ff00000000-0x1ff000fffff]
[   18.833774] PCI: Claiming 0000:01:00.0: Resource 0: 000001fe02001000..000001fe020010ff [101]
[   18.934771] PCI: Claiming 0000:01:00.0: Resource 1: 000001ff03000000..000001ff03001fff [200]
[   19.035769] pci 0000:01:00.0: class 0x10000
[   19.085850] PCI: Claiming 0000:01:01.0: Resource 0: 000001fe02001100..000001fe020011ff [101]
[   19.186849] pci 0000:01:01.0: class 0x40100
[   19.236931] PCI: Claiming 0000:01:02.0: Resource 0: 000001ff03002000..000001ff03003fff [200]
[   19.337928] PCI: Claiming 0000:01:02.0: Resource 1: 000001ff03010000..000001ff0301ffff [200]
[   19.438926] pci 0000:01:02.0: class 0x40100
[   19.496203] audit: type=2000 audit(0.320:1): state=initialized audit_enabled=0 res=1
[   19.622228] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[   19.702481] HugeTLB registered 8.00 MiB page size, pre-allocated 0 pages
[   19.782649] HugeTLB registered 256 MiB page size, pre-allocated 0 pages
[   19.861824] HugeTLB registered 2.00 GiB page size, pre-allocated 0 pages
[   19.945112] pci 0000:00:13.0: vgaarb: command 0x0080
[   20.004588] pci 0000:00:13.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[   20.104590] pci 0000:00:13.0: vgaarb: bridge control possible
[   20.173340] pci 0000:00:13.0: vgaarb: setting as boot device (VGA legacy resources not enabled)
[   20.277446] vgaarb: loaded
[   20.310330] SCSI subsystem initialized
[   20.357726] libata version 3.00 loaded.
[   20.362515] /pci@1f,0/ebus@c/eeprom@1,0: Mostek regs at 0x1fff1000000
[   20.440726] clocksource: Switched to clocksource hbtick
[   20.520493] kworker/u2:2 (232) used greatest stack depth: 9104 bytes left
[   20.628364] NET: Registered protocol family 2
[   20.681769] tcp_listen_portaddr_hash hash table entries: 1024 (order: 1, 16384 bytes)
[   20.775592] TCP established hash table entries: 16384 (order: 4, 131072 bytes)
[   20.862705] TCP bind hash table entries: 16384 (order: 4, 131072 bytes)
[   20.942575] TCP: Hash tables configured (established 16384 bind 16384)
[   21.021233] UDP hash table entries: 1024 (order: 2, 32768 bytes)
[   21.093318] UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes)
[   21.171152] NET: Registered protocol family 1
[   21.223437] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[   21.296401] pci 0000:00:07.0: quirk_isa_dma_hangs+0x0/0x40 took 71237 usecs
[   21.379757] PCI: Enabling device: (0000:00:0c.3), cmd 2
[   21.510825] pci 0000:00:0c.3: quirk_usb_early_handoff+0x0/0x740 took 127968 usecs
[   21.600498] PCI: CLS 64 bytes, default 64
[   21.600871] power: Control reg at 1fe02000800
[   21.658494] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[   21.787091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[   21.875693] io scheduler noop registered
[   21.923116] io scheduler cfq registered (default)
[   21.979998] PCI: Enabling device: (0000:00:13.0), cmd 83
[   21.980065] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[   22.055139] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[   22.211443] Console: switching to colour frame buffer device 80x30
[   22.294364] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[   22.366227] f007d64c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9, base_baud = 115387) is a 16550A
[   22.466332] Console: ttyS0 (SU)
[   22.504011] console [ttyS0] enabled
[   22.591449] bootconsole [earlyprom0] disabled
[   22.702383] f007f1a4: ttyS1 at MMIO 0x1fe020002e8 (irq = 9, base_baud = 115387) is a 16550A
[   22.813941] PCI: Enabling device: (0000:00:0d.0), cmd 5
[   22.820467] scsi host0: pata_ali
[   22.864871] scsi host1: pata_ali
[   22.907614] ata1: PATA max UDMA/66 cmd 0x1fe02000a00 ctl 0x1fe02000a18 bmdma 0x1fe02000a20 irq 15
[   23.024268] ata2: PATA max UDMA/66 cmd 0x1fe02000a10 ctl 0x1fe02000a08 bmdma 0x1fe02000a28 irq 15
[   23.143206] mousedev: PS/2 mouse device common for all mice
[   23.219219] rtc-m48t59 rtc-m48t59.0: registered as rtc0
[   23.288749] NET: Registered protocol family 17
[   23.347160] Key type dns_resolver registered
[   23.406899] registered taskstats version 1
[   23.462916] Key type encrypted registered
[   23.516861] rtc-m48t59 rtc-m48t59.0: setting system clock to 2018-04-11 20:18:18 UTC (1523477898)
[   23.633992] ata1.00: ATA-5: ST320414A, 3.28, max UDMA/100
[   23.704921] ata1.00: 39851760 sectors, multi 0: LBA 
[   23.770211] ata1.01: ATAPI: LTN486S, Y3S2, max UDMA/33
[   23.837714] ata1.01: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
[   23.947528] ata1.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[   24.060901] ata1.00: configured for UDMA/66
[   24.118364] ata1.01: configured for UDMA/33
[   24.174823] scsi 0:0:0:0: Direct-Access     ATA      ST320414A        3.28 PQ: 0 ANSI: 5
[   24.283973] sd 0:0:0:0: [sda] 39851760 512-byte logical blocks: (20.4 GB/19.0 GiB)
[   24.385464] scsi 0:0:1:0: CD-ROM            LITEON   CD-ROM LTN486S   Y3S2 PQ: 0 ANSI: 5
[   24.492621] sd 0:0:0:0: [sda] Write Protect is off
[   24.555632] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.558277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.686096]  sda: sda1 sda2 sda3 sda4
[   24.749770] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.847810] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   24.948613] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[   25.064513] devtmpfs: mounted
[   25.104639] This architecture does not have kernel memory protection.
[   26.061161] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   26.236661] systemd[1]: Detected architecture 'sparc64'.
[   26.671894] systemd[1]: Inserted module 'autofs4'
[   26.800339] NET: Registered protocol family 10
[   26.946140] modprobe (500) used greatest stack depth: 7200 bytes left
[   27.090050] Segment Routing with IPv6
[   27.138485] systemd[1]: Inserted module 'ipv6'
[   27.210274] systemd[1]: Set hostname to <blade100>.
[   27.970208] systemd-fstab-g (513) used greatest stack depth: 7000 bytes left
[   28.590730] systemd-sysv-ge (518) used greatest stack depth: 6680 bytes left
[   29.410697] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   29.609766] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   29.711102] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   29.810778] systemd[1]: Expecting device dev-ttyS0.device...
[   29.950980] systemd[1]: Starting Remote File Systems (Pre).
[   31.100922] systemd[1]: Listening on Journal Socket.
[   31.166388] systemd[1]: Starting System Slice.
[   31.280957] systemd[1]: Created slice System Slice.
[   31.345305] systemd[1]: Starting File System Check on Root Device...
[   31.495162] systemd[1]: Starting system-systemd\x2dfsck.slice.
[   31.651043] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   31.736980] systemd[1]: Starting system-getty.slice.
[   31.803873] systemd[1]: Created slice system-getty.slice.
[   31.892349] systemd[1]: Starting system-serial\x2dgetty.slice.
[   31.991909] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   32.781823] loop: module loaded
[   33.950896] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   34.594866] systemd-udevd[858]: starting version 215
[   35.389844] /pci@1f,0/ebus@c/flashprom@0,0: OBP Flash, RD 1fff0000000[100000] WR 1fff0000000[100000]
[   35.891041] usbcore: registered new interface driver usbfs
[   35.963346] usbcore: registered new interface driver hub
[   36.033281] usbcore: registered new device driver usb
[   36.178897] PCI: Enabling device: (0000:00:03.0), cmd 1
[   36.194250] PCI: Enabling device: (0000:01:00.0), cmd 3
[   36.194997] sym0: <810a> rev 0x12 at pci 0000:01:00.0 irq 16
[   36.282598] i2c i2c-0: Error: command never completed
[   36.363542] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   36.434571] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   36.671145] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   36.762362] random: crng init done
[   36.896231] i2c i2c-0: Error: command never completed
[   36.986450] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
[   37.069076] sym0: SCSI BUS has been reset.
[   37.122903] scsi host2: sym-2.2.3
[   37.190955] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[   37.287115] cdrom: Uniform CD-ROM driver Revision: 3.20
[   37.460994] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   37.615750] i2c i2c-0: Error: command never completed
[   37.694838] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   37.697846] i2c i2c-0: Error: command never completed
[   37.789344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   37.881449] i2c i2c-0: Error: command never completed
[   37.956046] i2c i2c-0: Error: command never completed
[   38.032177] i2c i2c-0: Error: command never completed
[   38.105769] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   38.192532] i2c i2c-0: Error: command never completed
[   38.273178] i2c i2c-0: Error: command never completed
[   38.348701] i2c i2c-0: Error: command never completed
[   38.425577] i2c i2c-0: Error: command never completed
[   38.493495] ehci-pci: EHCI PCI platform driver
[   38.608019] i2c i2c-0: Error: command never completed
[   38.676301] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[   38.752290] gem 0000:00:0c.1 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:0b:7d:5d
[   38.892964] ohci-pci: OHCI PCI platform driver
[   38.951551] ohci-pci 0000:00:0c.3: OHCI PCI host controller
[   39.024840] ohci-pci 0000:00:0c.3: new USB bus registered, assigned bus number 1
[   39.122190] ohci-pci 0000:00:0c.3: irq 13, io mem 0x1ff02000000
[   39.271178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.16
[   39.379924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   39.474909] usb usb1: Product: OHCI PCI host controller
[   39.543571] usb usb1: Manufacturer: Linux 4.16.0-11316-gf77cfbe-dirty ohci_hcd
[   39.638437] usb usb1: SerialNumber: 0000:00:0c.3
[   39.709158] hub 1-0:1.0: USB hub found
[   39.759851] hub 1-0:1.0: 4 ports detected
[   39.823518] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   39.894525] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   40.099630] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   40.170645] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   42.770525] Adding 907664k swap on /dev/sda4.  Priority:-2 extents:1 across:907664k 
[   43.331927] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   43.461921] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   44.086961] systemd-journald[848]: Received request to flush runtime journal from PID 1
[   45.582986] sungem_phy: PHY ID: 437421, addr: 1
[   45.583023] gem 0000:00:0c.1 eth0: Found Generic MII PHY
[   45.653493] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   45.734391] ip (1089) used greatest stack depth: 6528 bytes left
[   47.306788] systemd-udevd (871) used greatest stack depth: 5808 bytes left
[   47.412708] systemd-udevd (863) used greatest stack depth: 4592 bytes left
[   48.151054] gem 0000:00:0c.1 eth0: Link is up at 100 Mbps, full-duplex
[   48.242519] gem 0000:00:0c.1 eth0: Pause is disabled
[   48.311819] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

-- 
Meelis Roos (mroos@linux.ee)

WARNING: multiple messages have this Message-ID (diff)
From: Meelis Roos <mroos@linux.ee>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>,
	linux-pci@vger.kernel.org, sparclinux@vger.kernel.org
Subject: Re: sparc64 PCI BAR allocation is still problematic
Date: Wed, 11 Apr 2018 20:25:06 +0000	[thread overview]
Message-ID: <alpine.LRH.2.21.1804112323170.25495@math.ut.ee> (raw)
In-Reply-To: <20180411200143.GA105104@bhelgaas-glaptop.roam.corp.google.com>

> Thanks, this is really interesting.  Would you mind replacing the test
> patch with the following (this applies directly on the upstream
> kernel, e.g., fd3b36d27566)?
> 
> Sorry for the back and forth, but there's a lot going on here that I
> don't understand.  
> 
> I'd like to see the complete dmesg log, /proc/iomem, and "lspci -vv".

00000000-7effdfff : System RAM
  00404000-0085ab9f : Kernel code
  0085aba0-009b8a8f : Kernel data
  009f2000-00a37a37 : Kernel bss
7f000000-7fee5fff : System RAM
7ff04000-7ff0bfff : System RAM
1ff00000000-1ffffffffff : /pci@1f,0
  1ff00000000-1ff000fffff : 0000:00:07.0
  1ff00400000-1ff0041ffff : 0000:00:0c.1
    1ff00400000-1ff0041ffff : sungem
  1ff00420000-1ff00421fff : 0000:00:0c.2
  1ff00422000-1ff00423fff : 0000:00:0c.2
  1ff00424000-1ff00425fff : 0000:00:08.0
  1ff00426000-1ff00427fff : 0000:00:13.0
  1ff00440000-1ff0045ffff : 0000:00:13.0
  1ff00800000-1ff00bfffff : 0000:00:0c.1
  1ff00c00000-1ff00ffffff : 0000:00:0c.2
  1ff01000000-1ff013fffff : 0000:00:0c.3
  1ff02000000-1ff02ffffff : 0000:00:0c.3
    1ff02000000-1ff02ffffff : ohci_hcd
  1ff03000000-1ff030fffff : PCI Bus 0000:01
    1ff03000000-1ff03001fff : 0000:01:00.0
      1ff03000000-1ff03001fff : sym53c8xx
    1ff03002000-1ff03003fff : 0000:01:02.0
    1ff03010000-1ff0301ffff : 0000:01:02.0
  1ff04000000-1ff04ffffff : 0000:00:13.0
    1ff04000000-1ff04ffffff : atyfb
  1ffc0000000-1ffdfffffff : IOMMU
  1fff1000000-1fff1001fff : eeprom


00:03.0 Non-VGA unclassified device: ULi Electronics Inc. M7101 Power Management Controller [PMU]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: [virtual] I/O ports at <unassigned> [size\x16]
	Kernel driver in use: ali1535_smbus
00: b9 10 01 71 00 00 00 02 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 20 00 08 18 08 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 01
70: 0f 11 00 00 00 00 00 08 00 00 00 00 00 00 00 00
80: 00 00 10 10 00 00 00 00 01 04 00 00 00 00 00 00
90: 00 00 02 00 00 00 00 0f 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 40 40 01 00 00 02 00 60 04 01 03 00 00 00 30
c0: 00 10 ff 00 00 00 00 00 01 00 00 00 00 00 00 00
d0: ff 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 08 00 06 01 00 01 00 00 00 00 00 00 00 00 00
f0: 45 00 20 7e 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Bus: primary\0, secondary\x01, subordinate\x01, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 03000000-030fffff
	Prefetchable memory behind bridge: fffffffffff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent"0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
		Bridge: PM- B3+
00: 11 10 24 00 07 00 90 02 03 00 04 06 10 40 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 11 11 80 02
20: 00 03 00 03 f1 ff 01 00 ff ff ff ff 00 00 00 00
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 3e 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 01 01
e0: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:07.0 ISA bridge: ULi Electronics Inc. M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]
	Subsystem: ULi Electronics Inc. ALi M1533 Aladdin IV/V ISA Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: [virtual] I/O ports at 1fe02000000 [sizedK]
	Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [size=1M]
	Capabilities: [a0] Power Management version 1
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 33 15 0f 00 10 02 00 00 01 06 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 33 15
30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00
40: 11 13 49 80 83 09 00 07 00 00 00 10 00 00 fd 01
50: 00 00 00 40 00 07 02 00 6e 03 09 00 00 00 00 08
60: 00 00 00 00 00 00 00 00 00 00 00 00 80 20 00 00
70: 00 00 06 00 41 03 00 d3 04 02 00 02 00 00 01 10
80: 07 00 33 01 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:08.0 Multimedia audio controller: ULi Electronics Inc. M5451 PCI AC-Link Controller Audio Device (rev 01)
	Subsystem: ULi Electronics Inc. M5451 PCI AC-Link Controller Audio Device
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 14
	Region 0: I/O ports at 0900 [disabled] [size%6]
	Region 1: Memory at 00424000 (32-bit, non-prefetchable) [disabled] [size=8K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: b9 10 51 54 00 00 90 02 01 00 01 04 00 40 00 00
10: 01 09 00 00 00 40 42 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 b9 10 51 54
30: 00 00 00 00 dc 00 00 00 00 00 00 00 00 01 02 18
40: 00 00 00 00 00 04 00 e2 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 e6
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 Bridge: Oracle/SUN RIO EBUS (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 6250ns max), Cache Line Size: 64 bytes
	BIST result: 00
	Region 0: Memory at <ignored> (32-bit, non-prefetchable)
	Region 1: Memory at <ignored> (32-bit, non-prefetchable)
00: 8e 10 00 11 46 01 80 02 01 00 80 06 10 40 80 80
10: 00 00 00 f0 00 00 00 f1 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 19
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.1 Ethernet controller: Oracle/SUN RIO 10/100 Ethernet [eri] (rev 01)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 11
	BIST result: 00
	Region 0: Memory at 00400000 (32-bit, non-prefetchable) [size\x128K]
	Expansion ROM at 00800000 [disabled] [size=4M]
	Kernel driver in use: gem
00: 8e 10 01 11 06 00 80 02 01 00 00 02 10 40 80 80
10: 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 0a 05
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.2 FireWire (IEEE 1394): Oracle/SUN RIO 1394 (rev 01) (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin ? routed to IRQ 12
	BIST result: 00
	Region 0: Memory at 00420000 (32-bit, non-prefetchable) [size=8K]
	Region 1: Memory at 00422000 (32-bit, non-prefetchable) [size=8K]
	Expansion ROM at 00c00000 [disabled] [size=4M]
00: 8e 10 02 11 02 00 80 02 01 10 00 0c 10 40 80 80
10: 00 00 42 00 00 20 42 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 0a 05
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.3 USB controller: Oracle/SUN RIO USB (rev 01) (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2500ns min, 1250ns max), Cache Line Size: 64 bytes
	Interrupt: pin ? routed to IRQ 13
	BIST result: 00
	Region 0: Memory at 02000000 (32-bit, non-prefetchable) [size\x16M]
	Expansion ROM at 01000000 [disabled] [size=4M]
	Kernel driver in use: ohci-pci
00: 8e 10 03 11 06 00 80 02 01 10 03 0c 10 40 80 80
10: 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 0a 05
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 IDE interface: ULi Electronics Inc. M5229 IDE (rev c3) (prog-if ff)
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at 0a00 [size=8]
	Region 1: I/O ports at 0a18 [size=8]
	Region 2: I/O ports at 0a10 [size=8]
	Region 3: I/O ports at 0a08 [size=8]
	Region 4: I/O ports at 0a20 [size\x16]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pata_ali
00: b9 10 29 52 05 00 90 02 c3 ff 01 01 00 40 00 00
10: 01 0a 00 00 19 0a 00 00 11 0a 00 00 09 0a 00 00
20: 21 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 00 01 02 04
40: 06 00 00 7f 00 00 00 00 00 02 20 c9 00 80 ba 1a
50: 03 00 00 81 08 00 a8 00 01 31 31 31 03 09 0a 0a
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 21 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:13.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27) (prog-if 00 [VGA controller])
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 19
	Region 0: Memory at 04000000 (32-bit, non-prefetchable) [size\x16M]
	Region 1: I/O ports at 0b00 [size%6]
	Region 2: Memory at 00426000 (32-bit, non-prefetchable) [size=8K]
	Expansion ROM at 00440000 [disabled] [size\x128K]
	Capabilities: [5c] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: atyfb
00: 02 10 52 47 83 00 90 02 27 00 00 03 10 40 00 00
10: 00 00 00 04 01 0b 00 00 00 60 42 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 44 00 5c 00 00 00 00 00 00 00 f1 01 08 00
40: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 02 5c 10 00 01 00 00 ff 00 00 00 00 01 00 02 06
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (2000ns min, 16000ns max), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 1000 [size%6]
	Region 1: Memory at 03000000 (32-bit, non-prefetchable) [size=8K]
	Kernel driver in use: sym53c8xx
00: 00 10 01 00 17 00 00 02 12 00 00 01 10 40 00 00
10: 01 10 00 00 00 00 00 03 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: da 00 00 03 47 00 06 1f 00 08 00 00 80 00 00 02
90: ff e0 dc c1 00 ff ff ff 00 f0 31 21 a0 13 dd c1
a0: 00 08 00 01 00 00 00 50 c0 13 dd c1 c0 13 dd c1
b0: 00 10 dd c1 38 f0 dc c1 ce 6d 00 a1 c0 23 ba c1
c0: 8f 05 00 00 00 05 40 0f 0c 00 80 0f 07 00 02 80
d0: 00 00 02 80 00 00 02 80 00 00 02 80 00 01 ff 40
e0: 00 01 ff 40 00 01 ff 40 00 01 ff 40 00 01 ff 40
f0: 00 01 ff 40 00 01 ff 40 00 01 ff 40 00 01 ff 40

01:01.0 Multimedia audio controller: C-Media Electronics Inc CMI8738/CMI8768 PCI Audio (rev 10)
	Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 1100 [disabled] [size%6]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: f6 13 11 01 00 00 10 02 10 00 01 04 00 40 00 00
10: 01 11 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 f6 13 11 01
30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 02 18
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 01 00 02 06 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:02.0 Multimedia audio controller: Cirrus Logic Crystal CS4281 PCI Audio (rev 01)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at 03002000 (32-bit, non-prefetchable) [disabled] [size=8K]
	Region 1: Memory at 03010000 (32-bit, non-prefetchable) [disabled] [sizedK]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00: 13 10 05 60 00 00 10 02 01 00 01 04 00 40 00 00
10: 00 20 00 03 00 00 01 03 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 04 18
40: 01 00 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00
f0: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


[    0.000059] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
[    0.000116] PROMLIB: Root node compatible: 
[    0.000217] Linux version 4.16.0-11316-gf77cfbe-dirty (mroos@blade100) (gcc version 4.9.3 (Debian 4.9.3-2)) #168 Wed Apr 11 23:14:41 EEST 2018
[    0.280335] bootconsole [earlyprom0] enabled
[    0.331447] ARCH: SUN4U
[    0.360724] Ethernet address: 00:03:ba:0b:7d:5d
[    0.414898] MM: PAGE_OFFSET is 0xfffff80000000000 (max_phys_bits = 40)
[    0.494057] MM: VMALLOC [0x0000000100000000 --> 0x0000060000000000]
[    0.568973] MM: VMEMMAP [0x0000060000000000 --> 0x00000c0000000000]
[    0.720460] Kernel: Using 2 locked TLB entries for main kernel image.
[    0.797625] Remapping the kernel... 
[    0.798175] done.
[    1.201703] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[    1.270449] PROM: Built device tree with 90708 bytes of memory.
[    1.341590] Top of RAM: 0x7ff0c000, Total RAM: 0x7feec000
[    1.406150] Memory hole size: 0MB
[    1.979239] Allocated 16384 bytes for kernel page tables.
[    2.044448] Zone ranges:
[    2.074793]   Normal   [mem 0x0000000000000000-0x000000007ff0bfff]
[    2.148765] Movable zone start for each node
[    2.199783] Early memory node ranges
[    2.242493]   node   0: [mem 0x0000000000000000-0x000000007effdfff]
[    2.317409]   node   0: [mem 0x000000007f000000-0x000000007fee5fff]
[    2.392326]   node   0: [mem 0x000000007ff04000-0x000000007ff0bfff]
[    2.467248] Initmem setup node 0 [mem 0x0000000000000000-0x000000007ff0bfff]
[    2.551514] On node 0 totalpages: 262006
[    2.551525]   Normal zone: 2048 pages used for memmap
[    2.551530]   Normal zone: 0 pages reserved
[    2.551539]   Normal zone: 262006 pages, LIFO batch:15
[    2.653830] Booting Linux...
[    2.688370] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus]
[    2.765450] CPU CAPS: [vis]
[    2.804900] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    2.804913] pcpu-alloc: [0] 0 
[    2.807648] Built 1 zonelists, mobility grouping on.  Total pages: 259958
[    2.888901] Kernel command line: root=/dev/sda2 ro console=ttyS0
[    2.974322] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[    3.066836] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[    3.151270] Sorting __ex_table...
[    3.346086] Memory: 2069760K/2096048K available (4442K kernel code, 298K rwdata, 1096K rodata, 200K init, 278K bss, 26288K reserved, 0K cma-reserved)
[    3.506677] SLUB: HWalign2, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    3.585528] NR_IRQS: 2048, nr_irqs: 2048, preallocated irqs: 1
[    3.655545] clocksource: hbtick: mask: 0xffffffffffffffff max_cycles: 0x148020aa9, max_idle_ns: 440795202069 ns
[    3.776260] clocksource: mult[b400012e] shift[24]
[    3.832470] clockevent: mult[16c16bf] shift[32]
[    3.886908] Console: colour dummy device 80x25
[    4.090118] Calibrating delay using timer specific routine.. 11.12 BogoMIPS (lpjU648)
[    4.185866] pid_max: default: 32768 minimum: 301
[    4.241727] Mount-cache hash table entries: 4096 (order: 2, 32768 bytes)
[    4.321958] Mountpoint-cache hash table entries: 4096 (order: 2, 32768 bytes)
[    4.411687] devtmpfs: initialized
[    4.456082] random: get_random_u32 called from bucket_table_alloc+0x78/0x1e0 with crng_init=0
[    4.558763] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    4.676445] futex hash table entries: 256 (order: -1, 6144 bytes)
[    4.750134] NET: Registered protocol family 16
[    4.812677] IRQ pre handler NOT supported.
[    4.862096] IRQ pre handler NOT supported.
[    4.911395] IRQ pre handler NOT supported.
[    4.961961] audit: initializing netlink subsys (disabled)
[    5.033921] kworker/u2:0 (40) used greatest stack depth: 10304 bytes left
[    5.115934] random: fast init done
[    5.169855] /pci@1f,0: PCI IO [io  0x1fe02000000-0x1fe02ffffff] offset 1fe02000000
[    5.260566] /pci@1f,0: PCI MEM [mem 0x1ff00000000-0x1ffffffffff] offset 1ff00000000
[    5.352239] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[    5.411653] PCI: Scanning PBM /pci@1f,0
[    5.457965] sabre f005f408: PCI host bridge to bus 0000:00
[    5.523589] pci_bus 0000:00: root bus resource [io  0x1fe02000000-0x1fe02ffffff] (bus address [0x0000-0xffffff])
[    5.645351] pci_bus 0000:00: root bus resource [mem 0x1ff00000000-0x1ffffffffff] (bus address [0x00000000-0xffffffff])
[    5.773361] pci_bus 0000:00: root bus resource [bus 00-01]
[    5.839024] PCI: scan_bus[/pci@1f,0] bus no 0
[    5.891179]   * /pci@1f,0/ebus@c
[    5.929908]     create device, devfn: 60, type: 
[    5.985145]     class: 0x68000 device name: 0000:00:0c.0
[    6.048714] pci 0000:00:0c.0: [108e:1100] type 00 class 0x068000
[    6.120606]     adding to system ...
[    6.163761] PCI: dev header type: 0
[    6.205506]   * /pci@1f,0/isa@7
[    6.243152]     create device, devfn: 38, type: 
[    6.298419]     class: 0x60100 device name: 0000:00:07.0
[    6.361991] pci 0000:00:07.0: [10b9:1533] type 00 class 0x060100
[    6.433890]     parse addresses (40 bytes) @         (ptrval)
[    6.502673]   start: 1fe02000000, end: 1fe0200ffff, i: 10
[    6.567309] pci 0000:00:07.0: reg 0x10: [io  0x1fe02000000-0x1fe0200ffff]
[    6.648557]   start: 1ff00000000, end: 1ff000fffff, i: 14
[    6.713192] pci 0000:00:07.0: reg 0x14: [mem 0x1ff00000000-0x1ff000fffff]
[    6.794436]     adding to system ...
[    6.837517] PCI: dev header type: 0
[    6.879234]   * /pci@1f,0/pmu@3
[    6.916881]     create device, devfn: 18, type: 
[    6.972141]     class: 0x0 device name: 0000:00:03.0
[    7.031563] pci 0000:00:03.0: [10b9:7101] type 00 class 0x000000
[    7.103460]     parse addresses (20 bytes) @         (ptrval)
[    7.172245]   start: 1fe02000000, end: 1fe0200000f, i: 10
[    7.236882] pci 0000:00:03.0: reg 0x10: [io  0x1fe02000000-0x1fe0200000f]
[    7.318126]     adding to system ...
[    7.360970] pci 0000:00:03.0: quirk: [io  0x1fe02000800-0x1fe0200083f] claimed by ali7101 ACPI
[    7.464025] pci 0000:00:03.0: quirk: [io  0x1fe02000600-0x1fe0200061f] claimed by ali7101 SMB
[    7.566080] pci 0000:00:03.0: quirk_ali7101_acpi+0x0/0x40 took 19531 usecs
[    7.648616] PCI: dev header type: 0
[    7.690327]   * /pci@1f,0/network@c,1
[    7.734236]     create device, devfn: 61, type: network
[    7.796750]     class: 0x20000 device name: 0000:00:0c.1
[    7.860324] pci 0000:00:0c.1: [108e:1101] type 00 class 0x020000
[    7.932219]     parse addresses (40 bytes) @         (ptrval)
[    8.001003]   start: 1ff00400000, end: 1ff0041ffff, i: 10
[    8.065640] pci 0000:00:0c.1: reg 0x10: [mem 0x1ff00400000-0x1ff0041ffff]
[    8.146887]   start: 1ff00800000, end: 1ff00bfffff, i: 30
[    8.211522] pci 0000:00:0c.1: reg 0x30: [mem 0x1ff00800000-0x1ff00bfffff]
[    8.292769]     adding to system ...
[    8.335825] PCI: dev header type: 0
[    8.377569]   * /pci@1f,0/firewire@c,2
[    8.422489]     create device, devfn: 62, type: 
[    8.477747]     class: 0xc0010 device name: 0000:00:0c.2
[    8.541326] pci 0000:00:0c.2: [108e:1102] type 00 class 0x0c0010
[    8.613221]     parse addresses (60 bytes) @         (ptrval)
[    8.682007]   start: 1ff00420000, end: 1ff00421fff, i: 10
[    8.746642] pci 0000:00:0c.2: reg 0x10: [mem 0x1ff00420000-0x1ff00421fff]
[    8.827891]   start: 1ff00422000, end: 1ff00423fff, i: 14
[    8.892525] pci 0000:00:0c.2: reg 0x14: [mem 0x1ff00422000-0x1ff00423fff]
[    8.973775]   start: 1ff00c00000, end: 1ff00ffffff, i: 30
[    9.038411] pci 0000:00:0c.2: reg 0x30: [mem 0x1ff00c00000-0x1ff00ffffff]
[    9.119656]     adding to system ...
[    9.162736] PCI: dev header type: 0
[    9.204457]   * /pci@1f,0/usb@c,3
[    9.244184]     create device, devfn: 63, type: 
[    9.299439]     class: 0xc0310 device name: 0000:00:0c.3
[    9.363017] pci 0000:00:0c.3: [108e:1103] type 00 class 0x0c0310
[    9.434913]     parse addresses (40 bytes) @         (ptrval)
[    9.503701]   start: 1ff02000000, end: 1ff02ffffff, i: 10
[    9.568334] pci 0000:00:0c.3: reg 0x10: [mem 0x1ff02000000-0x1ff02ffffff]
[    9.649582]   start: 1ff01000000, end: 1ff013fffff, i: 30
[    9.714218] pci 0000:00:0c.3: reg 0x30: [mem 0x1ff01000000-0x1ff013fffff]
[    9.795464]     adding to system ...
[    9.838518] PCI: dev header type: 0
[    9.880258]   * /pci@1f,0/sound@8
[    9.919990]     create device, devfn: 40, type: 
[    9.975250]     class: 0x40100 device name: 0000:00:08.0
[   10.038823] pci 0000:00:08.0: [10b9:5451] type 00 class 0x040100
[   10.110721]     parse addresses (40 bytes) @         (ptrval)
[   10.179506]   start: 1fe02000900, end: 1fe020009ff, i: 10
[   10.244142] pci 0000:00:08.0: reg 0x10: [io  0x1fe02000900-0x1fe020009ff]
[   10.325391]   start: 1ff00424000, end: 1ff00425fff, i: 14
[   10.390026] pci 0000:00:08.0: reg 0x14: [mem 0x1ff00424000-0x1ff00425fff]
[   10.471271]     adding to system ...
[   10.514119] pci 0000:00:08.0: supports D1 D2
[   10.514131] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[   10.514430] PCI: dev header type: 0
[   10.556172]   * /pci@1f,0/ide@d
[   10.593822]     create device, devfn: 68, type: ide
[   10.652205]     class: 0x101ff device name: 0000:00:0d.0
[   10.715780] pci 0000:00:0d.0: [10b9:5229] type 00 class 0x0101ff
[   10.787672]     parse addresses (100 bytes) @         (ptrval)
[   10.857495]   start: 1fe02000a00, end: 1fe02000a07, i: 10
[   10.922130] pci 0000:00:0d.0: reg 0x10: [io  0x1fe02000a00-0x1fe02000a07]
[   11.003380]   start: 1fe02000a18, end: 1fe02000a1f, i: 14
[   11.068016] pci 0000:00:0d.0: reg 0x14: [io  0x1fe02000a18-0x1fe02000a1f]
[   11.149264]   start: 1fe02000a10, end: 1fe02000a17, i: 18
[   11.213900] pci 0000:00:0d.0: reg 0x18: [io  0x1fe02000a10-0x1fe02000a17]
[   11.295150]   start: 1fe02000a08, end: 1fe02000a0f, i: 1c
[   11.359785] pci 0000:00:0d.0: reg 0x1c: [io  0x1fe02000a08-0x1fe02000a0f]
[   11.441033]   start: 1fe02000a20, end: 1fe02000a2f, i: 20
[   11.505669] pci 0000:00:0d.0: reg 0x20: [io  0x1fe02000a20-0x1fe02000a2f]
[   11.586915]     adding to system ...
[   11.629978] PCI: dev header type: 0
[   11.671708]   * /pci@1f,0/pci@5
[   11.709365]     create device, devfn: 28, type: pci
[   11.767742]     class: 0x60400 device name: 0000:00:05.0
[   11.831315] pci 0000:00:05.0: [1011:0024] type 01 class 0x060400
[   11.903210]     adding to system ...
[   11.946311] PCI: dev header type: 1
[   11.988001] of_scan_pci_bridge(/pci@1f,0/pci@5)
[   12.042236]     Bridge bus range [1 --> 1]
[   12.091470]     Bridge ranges[        (ptrval)] simba[0]
[   12.154985]     RAW Range[81000000:00000000:00001000:81000000:00000000:00001000:00000000:00001000]
[   12.262208]       Using flags[00000101] start[0000000000001000] size[0000000000001000]
[   12.356975]     RAW Range[82000000:00000000:03000000:82000000:00000000:03000000:00000000:00100000]
[   12.464201]       Using flags[00000200] start[0000000003000000] size[0000000000100000]
[   12.558963]     bus name: PCI Bus 0000:01
[   12.606967] PCI: scan_bus[/pci@1f,0/pci@5] bus no 1
[   12.665361]   * /pci@1f,0/pci@5/scsi@0
[   12.710304]     create device, devfn: 0, type: 
[   12.764510]     class: 0x10000 device name: 0000:01:00.0
[   12.828090] pci 0000:01:00.0: [1000:0001] type 00 class 0x010000
[   12.899985]     parse addresses (40 bytes) @         (ptrval)
[   12.968770]   start: 1fe02001000, end: 1fe020010ff, i: 10
[   13.033408] pci 0000:01:00.0: reg 0x10: [io  0x1fe02001000-0x1fe020010ff]
[   13.114655]   start: 1ff03000000, end: 1ff03001fff, i: 14
[   13.179290] pci 0000:01:00.0: reg 0x14: [mem 0x1ff03000000-0x1ff03001fff]
[   13.260537]     adding to system ...
[   13.303636] PCI: dev header type: 0
[   13.345332]   * /pci@1f,0/pci@5/sound@1
[   13.391308]     create device, devfn: 8, type: 
[   13.445520]     class: 0x40100 device name: 0000:01:01.0
[   13.509093] pci 0000:01:01.0: [13f6:0111] type 00 class 0x040100
[   13.580989]     parse addresses (20 bytes) @         (ptrval)
[   13.649773]   start: 1fe02001100, end: 1fe020011ff, i: 10
[   13.714410] pci 0000:01:01.0: reg 0x10: [io  0x1fe02001100-0x1fe020011ff]
[   13.795654]     adding to system ...
[   13.838512] pci 0000:01:01.0: supports D1 D2
[   13.838755] PCI: dev header type: 0
[   13.880452]   * /pci@1f,0/pci@5/sound@2
[   13.926429]     create device, devfn: 10, type: 
[   13.981678]     class: 0x40100 device name: 0000:01:02.0
[   14.045249] pci 0000:01:02.0: [1013:6005] type 00 class 0x040100
[   14.117146]     parse addresses (40 bytes) @         (ptrval)
[   14.185931]   start: 1ff03002000, end: 1ff03003fff, i: 10
[   14.250568] pci 0000:01:02.0: reg 0x10: [mem 0x1ff03002000-0x1ff03003fff]
[   14.331816]   start: 1ff03010000, end: 1ff0301ffff, i: 14
[   14.396450] pci 0000:01:02.0: reg 0x14: [mem 0x1ff03010000-0x1ff0301ffff]
[   14.477696]     adding to system ...
[   14.520555] pci 0000:01:02.0: supports D1 D2
[   14.520565] pci 0000:01:02.0: PME# supported from D0 D1 D2 D3hot
[   14.520870] PCI: dev header type: 0
[   14.562597]   * /pci@1f,0/SUNW,m64B@13
[   14.607528]     create device, devfn: 98, type: display
[   14.670066]     class: 0x30000 device name: 0000:00:13.0
[   14.733629] pci 0000:00:13.0: [1002:4752] type 00 class 0x030000
[   14.805526]     parse addresses (80 bytes) @         (ptrval)
[   14.874311]   start: 1ff04000000, end: 1ff04ffffff, i: 10
[   14.938947] pci 0000:00:13.0: reg 0x10: [mem 0x1ff04000000-0x1ff04ffffff]
[   15.020197]   start: 1fe02000b00, end: 1fe02000bff, i: 14
[   15.084831] pci 0000:00:13.0: reg 0x14: [io  0x1fe02000b00-0x1fe02000bff]
[   15.166080]   start: 1ff00426000, end: 1ff00427fff, i: 18
[   15.230717] pci 0000:00:13.0: reg 0x18: [mem 0x1ff00426000-0x1ff00427fff]
[   15.311966]   start: 1ff00440000, end: 1ff0045ffff, i: 30
[   15.376601] pci 0000:00:13.0: reg 0x30: [mem 0x1ff00440000-0x1ff0045ffff]
[   15.457846]     adding to system ...
[   15.500698] pci 0000:00:13.0: supports D1 D2
[   15.500959] PCI: dev header type: 0
[   15.542832] pci 0000:00:0c.0: class 0x68000
[   15.592936] PCI: Claiming 0000:00:07.0: Resource 0: 000001fe02000000..000001fe0200ffff [101]
[   15.693943] pci 0000:00:07.0: can't claim BAR 0 [io  0x1fe02000000-0x1fe0200ffff]: address conflict with 0000:00:03.0 [io  0x1fe02000600-0x1fe0200061f]
[   15.856232] PCI: Claiming 0000:00:07.0: Resource 1: 000001ff00000000..000001ff000fffff [200]
[   15.957232] pci 0000:00:07.0: class 0x60100
[   16.007314] PCI: Claiming 0000:00:03.0: Resource 0: 000001fe02000000..000001fe0200000f [101]
[   16.108310] pci 0000:00:03.0: class 0x0
[   16.154234] PCI: Claiming 0000:00:0c.1: Resource 0: 000001ff00400000..000001ff0041ffff [200]
[   16.255231] PCI: Claiming 0000:00:0c.1: Resource 6: 000001ff00800000..000001ff00bfffff [44200]
[   16.358309] pci 0000:00:0c.1: class 0x20000
[   16.408389] PCI: Claiming 0000:00:0c.2: Resource 0: 000001ff00420000..000001ff00421fff [200]
[   16.509387] PCI: Claiming 0000:00:0c.2: Resource 1: 000001ff00422000..000001ff00423fff [200]
[   16.610384] PCI: Claiming 0000:00:0c.2: Resource 6: 000001ff00c00000..000001ff00ffffff [44200]
[   16.713462] pci 0000:00:0c.2: class 0xc0010
[   16.763541] PCI: Claiming 0000:00:0c.3: Resource 0: 000001ff02000000..000001ff02ffffff [200]
[   16.864540] PCI: Claiming 0000:00:0c.3: Resource 6: 000001ff01000000..000001ff013fffff [44200]
[   16.967617] pci 0000:00:0c.3: class 0xc0310
[   17.017696] PCI: Claiming 0000:00:08.0: Resource 0: 000001fe02000900..000001fe020009ff [101]
[   17.118693] PCI: Claiming 0000:00:08.0: Resource 1: 000001ff00424000..000001ff00425fff [200]
[   17.219694] pci 0000:00:08.0: class 0x40100
[   17.269774] PCI: Claiming 0000:00:0d.0: Resource 0: 000001fe02000a00..000001fe02000a07 [101]
[   17.370772] PCI: Claiming 0000:00:0d.0: Resource 1: 000001fe02000a18..000001fe02000a1f [101]
[   17.471768] PCI: Claiming 0000:00:0d.0: Resource 2: 000001fe02000a10..000001fe02000a17 [101]
[   17.572766] PCI: Claiming 0000:00:0d.0: Resource 3: 000001fe02000a08..000001fe02000a0f [101]
[   17.673762] PCI: Claiming 0000:00:0d.0: Resource 4: 000001fe02000a20..000001fe02000a2f [101]
[   17.774763] pci 0000:00:0d.0: class 0x101ff
[   17.824843] PCI: Claiming 0000:00:05.0: Resource 7: 000001fe02001000..000001fe02001fff [101]
[   17.925839] PCI: Claiming 0000:00:05.0: Resource 8: 000001ff03000000..000001ff030fffff [200]
[   18.026838] pci 0000:00:05.0: class 0x60400
[   18.076919] PCI: Claiming 0000:00:13.0: Resource 0: 000001ff04000000..000001ff04ffffff [200]
[   18.177916] PCI: Claiming 0000:00:13.0: Resource 1: 000001fe02000b00..000001fe02000bff [101]
[   18.278914] PCI: Claiming 0000:00:13.0: Resource 2: 000001ff00426000..000001ff00427fff [200]
[   18.379910] PCI: Claiming 0000:00:13.0: Resource 6: 000001ff00440000..000001ff0045ffff [44200]
[   18.482987] pci 0000:00:13.0: class 0x30000
[   18.533079] pci 0000:00:13.0: requesting [mem 0x1ff000a0000-0x1ff000bffff] from /pci@1f,0 [mem 0x1ff00000000-0x1ffffffffff]
[   18.666284] pci 0000:00:13.0: can't claim VGA legacy [mem 0x1ff000a0000-0x1ff000bffff]: address conflict with 0000:00:07.0 [mem 0x1ff00000000-0x1ff000fffff]
[   18.833774] PCI: Claiming 0000:01:00.0: Resource 0: 000001fe02001000..000001fe020010ff [101]
[   18.934771] PCI: Claiming 0000:01:00.0: Resource 1: 000001ff03000000..000001ff03001fff [200]
[   19.035769] pci 0000:01:00.0: class 0x10000
[   19.085850] PCI: Claiming 0000:01:01.0: Resource 0: 000001fe02001100..000001fe020011ff [101]
[   19.186849] pci 0000:01:01.0: class 0x40100
[   19.236931] PCI: Claiming 0000:01:02.0: Resource 0: 000001ff03002000..000001ff03003fff [200]
[   19.337928] PCI: Claiming 0000:01:02.0: Resource 1: 000001ff03010000..000001ff0301ffff [200]
[   19.438926] pci 0000:01:02.0: class 0x40100
[   19.496203] audit: type 00 audit(0.320:1): state=initialized audit_enabled=0 res=1
[   19.622228] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[   19.702481] HugeTLB registered 8.00 MiB page size, pre-allocated 0 pages
[   19.782649] HugeTLB registered 256 MiB page size, pre-allocated 0 pages
[   19.861824] HugeTLB registered 2.00 GiB page size, pre-allocated 0 pages
[   19.945112] pci 0000:00:13.0: vgaarb: command 0x0080
[   20.004588] pci 0000:00:13.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[   20.104590] pci 0000:00:13.0: vgaarb: bridge control possible
[   20.173340] pci 0000:00:13.0: vgaarb: setting as boot device (VGA legacy resources not enabled)
[   20.277446] vgaarb: loaded
[   20.310330] SCSI subsystem initialized
[   20.357726] libata version 3.00 loaded.
[   20.362515] /pci@1f,0/ebus@c/eeprom@1,0: Mostek regs at 0x1fff1000000
[   20.440726] clocksource: Switched to clocksource hbtick
[   20.520493] kworker/u2:2 (232) used greatest stack depth: 9104 bytes left
[   20.628364] NET: Registered protocol family 2
[   20.681769] tcp_listen_portaddr_hash hash table entries: 1024 (order: 1, 16384 bytes)
[   20.775592] TCP established hash table entries: 16384 (order: 4, 131072 bytes)
[   20.862705] TCP bind hash table entries: 16384 (order: 4, 131072 bytes)
[   20.942575] TCP: Hash tables configured (established 16384 bind 16384)
[   21.021233] UDP hash table entries: 1024 (order: 2, 32768 bytes)
[   21.093318] UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes)
[   21.171152] NET: Registered protocol family 1
[   21.223437] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[   21.296401] pci 0000:00:07.0: quirk_isa_dma_hangs+0x0/0x40 took 71237 usecs
[   21.379757] PCI: Enabling device: (0000:00:0c.3), cmd 2
[   21.510825] pci 0000:00:0c.3: quirk_usb_early_handoff+0x0/0x740 took 127968 usecs
[   21.600498] PCI: CLS 64 bytes, default 64
[   21.600871] power: Control reg at 1fe02000800
[   21.658494] workingset: timestamp_bitsb max_order\x18 bucket_order=0
[   21.787091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[   21.875693] io scheduler noop registered
[   21.923116] io scheduler cfq registered (default)
[   21.979998] PCI: Enabling device: (0000:00:13.0), cmd 83
[   21.980065] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[   22.055139] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[   22.211443] Console: switching to colour frame buffer device 80x30
[   22.294364] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[   22.366227] f007d64c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9, base_baud = 115387) is a 16550A
[   22.466332] Console: ttyS0 (SU)
[   22.504011] console [ttyS0] enabled
[   22.591449] bootconsole [earlyprom0] disabled
[   22.702383] f007f1a4: ttyS1 at MMIO 0x1fe020002e8 (irq = 9, base_baud = 115387) is a 16550A
[   22.813941] PCI: Enabling device: (0000:00:0d.0), cmd 5
[   22.820467] scsi host0: pata_ali
[   22.864871] scsi host1: pata_ali
[   22.907614] ata1: PATA max UDMA/66 cmd 0x1fe02000a00 ctl 0x1fe02000a18 bmdma 0x1fe02000a20 irq 15
[   23.024268] ata2: PATA max UDMA/66 cmd 0x1fe02000a10 ctl 0x1fe02000a08 bmdma 0x1fe02000a28 irq 15
[   23.143206] mousedev: PS/2 mouse device common for all mice
[   23.219219] rtc-m48t59 rtc-m48t59.0: registered as rtc0
[   23.288749] NET: Registered protocol family 17
[   23.347160] Key type dns_resolver registered
[   23.406899] registered taskstats version 1
[   23.462916] Key type encrypted registered
[   23.516861] rtc-m48t59 rtc-m48t59.0: setting system clock to 2018-04-11 20:18:18 UTC (1523477898)
[   23.633992] ata1.00: ATA-5: ST320414A, 3.28, max UDMA/100
[   23.704921] ata1.00: 39851760 sectors, multi 0: LBA 
[   23.770211] ata1.01: ATAPI: LTN486S, Y3S2, max UDMA/33
[   23.837714] ata1.01: WARNING: ATAPI DMA disabled for reliability issues.  It can be enabled
[   23.947528] ata1.01: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[   24.060901] ata1.00: configured for UDMA/66
[   24.118364] ata1.01: configured for UDMA/33
[   24.174823] scsi 0:0:0:0: Direct-Access     ATA      ST320414A        3.28 PQ: 0 ANSI: 5
[   24.283973] sd 0:0:0:0: [sda] 39851760 512-byte logical blocks: (20.4 GB/19.0 GiB)
[   24.385464] scsi 0:0:1:0: CD-ROM            LITEON   CD-ROM LTN486S   Y3S2 PQ: 0 ANSI: 5
[   24.492621] sd 0:0:0:0: [sda] Write Protect is off
[   24.555632] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   24.558277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   24.686096]  sda: sda1 sda2 sda3 sda4
[   24.749770] sd 0:0:0:0: [sda] Attached SCSI disk
[   24.847810] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   24.948613] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[   25.064513] devtmpfs: mounted
[   25.104639] This architecture does not have kernel memory protection.
[   26.061161] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[   26.236661] systemd[1]: Detected architecture 'sparc64'.
[   26.671894] systemd[1]: Inserted module 'autofs4'
[   26.800339] NET: Registered protocol family 10
[   26.946140] modprobe (500) used greatest stack depth: 7200 bytes left
[   27.090050] Segment Routing with IPv6
[   27.138485] systemd[1]: Inserted module 'ipv6'
[   27.210274] systemd[1]: Set hostname to <blade100>.
[   27.970208] systemd-fstab-g (513) used greatest stack depth: 7000 bytes left
[   28.590730] systemd-sysv-ge (518) used greatest stack depth: 6680 bytes left
[   29.410697] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[   29.609766] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   29.711102] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   29.810778] systemd[1]: Expecting device dev-ttyS0.device...
[   29.950980] systemd[1]: Starting Remote File Systems (Pre).
[   31.100922] systemd[1]: Listening on Journal Socket.
[   31.166388] systemd[1]: Starting System Slice.
[   31.280957] systemd[1]: Created slice System Slice.
[   31.345305] systemd[1]: Starting File System Check on Root Device...
[   31.495162] systemd[1]: Starting system-systemd\x2dfsck.slice.
[   31.651043] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   31.736980] systemd[1]: Starting system-getty.slice.
[   31.803873] systemd[1]: Created slice system-getty.slice.
[   31.892349] systemd[1]: Starting system-serial\x2dgetty.slice.
[   31.991909] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   32.781823] loop: module loaded
[   33.950896] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   34.594866] systemd-udevd[858]: starting version 215
[   35.389844] /pci@1f,0/ebus@c/flashprom@0,0: OBP Flash, RD 1fff0000000[100000] WR 1fff0000000[100000]
[   35.891041] usbcore: registered new interface driver usbfs
[   35.963346] usbcore: registered new interface driver hub
[   36.033281] usbcore: registered new device driver usb
[   36.178897] PCI: Enabling device: (0000:00:03.0), cmd 1
[   36.194250] PCI: Enabling device: (0000:01:00.0), cmd 3
[   36.194997] sym0: <810a> rev 0x12 at pci 0000:01:00.0 irq 16
[   36.282598] i2c i2c-0: Error: command never completed
[   36.363542] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   36.434571] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   36.671145] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   36.762362] random: crng init done
[   36.896231] i2c i2c-0: Error: command never completed
[   36.986450] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
[   37.069076] sym0: SCSI BUS has been reset.
[   37.122903] scsi host2: sym-2.2.3
[   37.190955] sr 0:0:1:0: [sr0] scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[   37.287115] cdrom: Uniform CD-ROM driver Revision: 3.20
[   37.460994] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   37.615750] i2c i2c-0: Error: command never completed
[   37.694838] sr 0:0:1:0: Attached scsi CD-ROM sr0
[   37.697846] i2c i2c-0: Error: command never completed
[   37.789344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   37.881449] i2c i2c-0: Error: command never completed
[   37.956046] i2c i2c-0: Error: command never completed
[   38.032177] i2c i2c-0: Error: command never completed
[   38.105769] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   38.192532] i2c i2c-0: Error: command never completed
[   38.273178] i2c i2c-0: Error: command never completed
[   38.348701] i2c i2c-0: Error: command never completed
[   38.425577] i2c i2c-0: Error: command never completed
[   38.493495] ehci-pci: EHCI PCI platform driver
[   38.608019] i2c i2c-0: Error: command never completed
[   38.676301] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[   38.752290] gem 0000:00:0c.1 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:0b:7d:5d
[   38.892964] ohci-pci: OHCI PCI platform driver
[   38.951551] ohci-pci 0000:00:0c.3: OHCI PCI host controller
[   39.024840] ohci-pci 0000:00:0c.3: new USB bus registered, assigned bus number 1
[   39.122190] ohci-pci 0000:00:0c.3: irq 13, io mem 0x1ff02000000
[   39.271178] usb usb1: New USB device found, idVendor\x1d6b, idProduct\001, bcdDevice= 4.16
[   39.379924] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   39.474909] usb usb1: Product: OHCI PCI host controller
[   39.543571] usb usb1: Manufacturer: Linux 4.16.0-11316-gf77cfbe-dirty ohci_hcd
[   39.638437] usb usb1: SerialNumber: 0000:00:0c.3
[   39.709158] hub 1-0:1.0: USB hub found
[   39.759851] hub 1-0:1.0: 4 ports detected
[   39.823518] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   39.894525] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   40.099630] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   40.170645] alim7101_wdt: Detected old alim7101 revision 'a1d'.  If this is a cobalt board, set the 'use_gpio' module parameter.
[   42.770525] Adding 907664k swap on /dev/sda4.  Priority:-2 extents:1 across:907664k 
[   43.331927] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[   43.461921] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   44.086961] systemd-journald[848]: Received request to flush runtime journal from PID 1
[   45.582986] sungem_phy: PHY ID: 437421, addr: 1
[   45.583023] gem 0000:00:0c.1 eth0: Found Generic MII PHY
[   45.653493] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   45.734391] ip (1089) used greatest stack depth: 6528 bytes left
[   47.306788] systemd-udevd (871) used greatest stack depth: 5808 bytes left
[   47.412708] systemd-udevd (863) used greatest stack depth: 4592 bytes left
[   48.151054] gem 0000:00:0c.1 eth0: Link is up at 100 Mbps, full-duplex
[   48.242519] gem 0000:00:0c.1 eth0: Pause is disabled
[   48.311819] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

-- 
Meelis Roos (mroos@linux.ee)

  reply	other threads:[~2018-04-11 20:25 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-08 18:44 sparc64 PCI BAR allocation is still problematic Meelis Roos
2018-04-08 18:44 ` Meelis Roos
2018-04-08 21:21 ` David Miller
2018-04-08 21:21   ` David Miller
2018-04-09  3:00   ` Sinan Kaya
2018-04-09  3:00     ` Sinan Kaya
2018-04-09 10:47     ` Meelis Roos
2018-04-09 10:47       ` Meelis Roos
2018-04-09  3:23 ` Bjorn Helgaas
2018-04-09  3:23   ` Bjorn Helgaas
2018-04-09 14:30   ` Meelis Roos
2018-04-09 14:30     ` Meelis Roos
2018-04-10 17:34 ` Bjorn Helgaas
2018-04-10 17:34   ` Bjorn Helgaas
2018-04-10 18:45   ` Meelis Roos
2018-04-10 18:45     ` Meelis Roos
2018-04-10 18:56     ` Bjorn Helgaas
2018-04-10 18:56       ` Bjorn Helgaas
2018-04-11  7:59       ` Meelis Roos
2018-04-11  7:59         ` Meelis Roos
2018-04-11 13:33         ` Bjorn Helgaas
2018-04-11 13:33           ` Bjorn Helgaas
2018-04-11 14:40           ` Meelis Roos
2018-04-11 14:40             ` Meelis Roos
2018-04-11 20:01             ` Bjorn Helgaas
2018-04-11 20:01               ` Bjorn Helgaas
2018-04-11 20:25               ` Meelis Roos [this message]
2018-04-11 20:25                 ` Meelis Roos
2018-04-11 21:17                 ` Bjorn Helgaas
2018-04-11 21:17                   ` Bjorn Helgaas
2018-05-21 20:10         ` Bjorn Helgaas
2018-05-21 20:10           ` Bjorn Helgaas
2018-06-20 22:05 ` Bjorn Helgaas
2018-06-20 22:05   ` Bjorn Helgaas
2018-06-29 10:06   ` Meelis Roos
2018-06-29 10:06     ` Meelis Roos
2018-06-29 13:47     ` Bjorn Helgaas
2018-06-29 13:47       ` Bjorn Helgaas
2018-07-06 19:49       ` Meelis Roos
2018-07-06 19:49         ` Meelis Roos

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LRH.2.21.1804112323170.25495@math.ut.ee \
    --to=mroos@linux.ee \
    --cc=helgaas@kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=sparclinux@vger.kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.