All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-02 14:06 ` marek.vasut
  0 siblings, 0 replies; 10+ messages in thread
From: marek.vasut @ 2019-05-02 14:06 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: Marek Vasut, Geert Uytterhoeven, Simon Horman, linux-renesas-soc

From: Marek Vasut <marek.vasut+renesas@gmail.com>

The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
Since the line is configured correctly by default, the system works fine.
However, add the IRQ line pin multiplexing configuration for completeness.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
---
 arch/arm/boot/dts/r8a7790-lager.dts   | 7 +++++++
 arch/arm/boot/dts/r8a7790-stout.dts   | 7 ++++++-
 arch/arm/boot/dts/r8a7791-koelsch.dts | 7 +++++++
 arch/arm/boot/dts/r8a7791-porter.dts  | 7 +++++++
 arch/arm/boot/dts/r8a7792-blanche.dts | 7 +++++++
 arch/arm/boot/dts/r8a7793-gose.dts    | 7 +++++++
 6 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 7b9508e83d46..d637b9727808 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -423,6 +423,8 @@
 	 */
 	i2cpwr: i2c-13 {
 		compatible = "i2c-demux-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
 		i2c-parent = <&iic3>, <&i2c3>;
 		i2c-bus-name = "i2c-pwr";
 		#address-cells = <1>;
@@ -615,6 +617,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	hsusb_pins: hsusb {
 		groups = "usb0_ovc_vbus";
 		function = "usb0";
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 7a7d3b84d1a6..ad68e6034b43 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -179,6 +179,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -317,7 +322,7 @@
 
 &iic3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>;
+	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index e6580aa0cea3..a116bfc11f0b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -540,6 +540,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -776,6 +781,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fefdf8238bbe..e08d257f5d0c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -228,6 +228,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -373,6 +378,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index b6fa80c3b07e..7b0d17ee87fb 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -234,6 +234,11 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp";
 		function = "du1";
 	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
 };
 
 &rwdt {
@@ -309,6 +314,8 @@
 };
 
 &iic3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f51601af89a2..9984ebf06695 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -514,6 +514,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -711,6 +716,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 10+ messages in thread
* [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-02 14:06 ` marek.vasut
  0 siblings, 0 replies; 10+ messages in thread
From: marek.vasut @ 2019-05-02 14:06 UTC (permalink / raw)
  To: linux-arm-kernel
  Cc: linux-renesas-soc, Simon Horman, Geert Uytterhoeven, Marek Vasut

From: Marek Vasut <marek.vasut+renesas@gmail.com>

The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
Since the line is configured correctly by default, the system works fine.
However, add the IRQ line pin multiplexing configuration for completeness.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: linux-renesas-soc@vger.kernel.org
To: linux-arm-kernel@lists.infradead.org
---
 arch/arm/boot/dts/r8a7790-lager.dts   | 7 +++++++
 arch/arm/boot/dts/r8a7790-stout.dts   | 7 ++++++-
 arch/arm/boot/dts/r8a7791-koelsch.dts | 7 +++++++
 arch/arm/boot/dts/r8a7791-porter.dts  | 7 +++++++
 arch/arm/boot/dts/r8a7792-blanche.dts | 7 +++++++
 arch/arm/boot/dts/r8a7793-gose.dts    | 7 +++++++
 6 files changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 7b9508e83d46..d637b9727808 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -423,6 +423,8 @@
 	 */
 	i2cpwr: i2c-13 {
 		compatible = "i2c-demux-pinctrl";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_irq_pins>;
 		i2c-parent = <&iic3>, <&i2c3>;
 		i2c-bus-name = "i2c-pwr";
 		#address-cells = <1>;
@@ -615,6 +617,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	hsusb_pins: hsusb {
 		groups = "usb0_ovc_vbus";
 		function = "usb0";
diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts
index 7a7d3b84d1a6..ad68e6034b43 100644
--- a/arch/arm/boot/dts/r8a7790-stout.dts
+++ b/arch/arm/boot/dts/r8a7790-stout.dts
@@ -179,6 +179,11 @@
 		function = "iic3";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -317,7 +322,7 @@
 
 &iic3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&iic3_pins>;
+	pinctrl-0 = <&iic3_pins &pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index e6580aa0cea3..a116bfc11f0b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -540,6 +540,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -776,6 +781,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index fefdf8238bbe..e08d257f5d0c 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -228,6 +228,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -373,6 +378,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index b6fa80c3b07e..7b0d17ee87fb 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -234,6 +234,11 @@
 		groups = "du1_rgb666", "du1_sync", "du1_disp";
 		function = "du1";
 	};
+
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
 };
 
 &rwdt {
@@ -309,6 +314,8 @@
 };
 
 &iic3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 
 	pmic@58 {
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f51601af89a2..9984ebf06695 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -514,6 +514,11 @@
 		function = "intc";
 	};
 
+	pmic_irq_pins: pmicirq {
+		groups = "intc_irq2";
+		function = "intc";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -711,6 +716,8 @@
 };
 
 &i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_irq_pins>;
 	status = "okay";
 	clock-frequency = <100000>;
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  2019-05-02 14:06 ` marek.vasut
@ 2019-05-03 12:36   ` Geert Uytterhoeven
  -1 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2019-05-03 12:36 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Linux ARM, Marek Vasut, Geert Uytterhoeven, Simon Horman, Linux-Renesas

Hi Marek,

On Thu, May 2, 2019 at 4:06 PM <marek.vasut@gmail.com> wrote:
> From: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
> Since the line is configured correctly by default, the system works fine.
> However, add the IRQ line pin multiplexing configuration for completeness.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -423,6 +423,8 @@
>          */
>         i2cpwr: i2c-13 {
>                 compatible = "i2c-demux-pinctrl";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pmic_irq_pins>;
>                 i2c-parent = <&iic3>, <&i2c3>;
>                 i2c-bus-name = "i2c-pwr";
>                 #address-cells = <1>;
> @@ -615,6 +617,11 @@
>                 function = "iic3";
>         };
>
> +       pmic_irq_pins: pmicirq {
> +               groups = "intc_irq2";
> +               function = "intc";
> +       };

Please insert according to alphabetical sort order.
Oh, we don't have the R-Car Gen2 entries sorted yet. Nevermind...

> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -234,6 +234,11 @@
>                 groups = "du1_rgb666", "du1_sync", "du1_disp";
>                 function = "du1";
>         };
> +
> +       pmic_irq_pins: pmicirq {
> +               groups = "intc_irq2";
> +               function = "intc";
> +       };
>  };
>
>  &rwdt {
> @@ -309,6 +314,8 @@
>  };
>
>  &iic3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pmic_irq_pins>;

Given Blanche has a single device connected to irq2, I think it makes
sense to move the pinctrl properties to the pmic node below.

With that fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-03 12:36   ` Geert Uytterhoeven
  0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2019-05-03 12:36 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Linux-Renesas, Simon Horman, Geert Uytterhoeven, Linux ARM, Marek Vasut

Hi Marek,

On Thu, May 2, 2019 at 4:06 PM <marek.vasut@gmail.com> wrote:
> From: Marek Vasut <marek.vasut+renesas@gmail.com>
>
> The PMIC IRQ line pin multiplexing configuration is missing from the DTs.
> Since the line is configured correctly by default, the system works fine.
> However, add the IRQ line pin multiplexing configuration for completeness.
>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>

Thanks for your patch!

> --- a/arch/arm/boot/dts/r8a7790-lager.dts
> +++ b/arch/arm/boot/dts/r8a7790-lager.dts
> @@ -423,6 +423,8 @@
>          */
>         i2cpwr: i2c-13 {
>                 compatible = "i2c-demux-pinctrl";
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pmic_irq_pins>;
>                 i2c-parent = <&iic3>, <&i2c3>;
>                 i2c-bus-name = "i2c-pwr";
>                 #address-cells = <1>;
> @@ -615,6 +617,11 @@
>                 function = "iic3";
>         };
>
> +       pmic_irq_pins: pmicirq {
> +               groups = "intc_irq2";
> +               function = "intc";
> +       };

Please insert according to alphabetical sort order.
Oh, we don't have the R-Car Gen2 entries sorted yet. Nevermind...

> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -234,6 +234,11 @@
>                 groups = "du1_rgb666", "du1_sync", "du1_disp";
>                 function = "du1";
>         };
> +
> +       pmic_irq_pins: pmicirq {
> +               groups = "intc_irq2";
> +               function = "intc";
> +       };
>  };
>
>  &rwdt {
> @@ -309,6 +314,8 @@
>  };
>
>  &iic3 {
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&pmic_irq_pins>;

Given Blanche has a single device connected to irq2, I think it makes
sense to move the pinctrl properties to the pmic node below.

With that fixed:
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  2019-05-03 12:36   ` Geert Uytterhoeven
@ 2019-05-03 15:18     ` Marek Vasut
  -1 siblings, 0 replies; 10+ messages in thread
From: Marek Vasut @ 2019-05-03 15:18 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Linux ARM, Marek Vasut, Geert Uytterhoeven, Simon Horman, Linux-Renesas

On 5/3/19 2:36 PM, Geert Uytterhoeven wrote:
Hi,

[...]

>>  &rwdt {
>> @@ -309,6 +314,8 @@
>>  };
>>
>>  &iic3 {
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&pmic_irq_pins>;
> 
> Given Blanche has a single device connected to irq2, I think it makes
> sense to move the pinctrl properties to the pmic node below.

It makes blanche somehow inconsistent with the other boards, but if you
insist ... ?

> With that fixed:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 


-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-03 15:18     ` Marek Vasut
  0 siblings, 0 replies; 10+ messages in thread
From: Marek Vasut @ 2019-05-03 15:18 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Linux-Renesas, Simon Horman, Geert Uytterhoeven, Linux ARM, Marek Vasut

On 5/3/19 2:36 PM, Geert Uytterhoeven wrote:
Hi,

[...]

>>  &rwdt {
>> @@ -309,6 +314,8 @@
>>  };
>>
>>  &iic3 {
>> +       pinctrl-names = "default";
>> +       pinctrl-0 = <&pmic_irq_pins>;
> 
> Given Blanche has a single device connected to irq2, I think it makes
> sense to move the pinctrl properties to the pmic node below.

It makes blanche somehow inconsistent with the other boards, but if you
insist ... ?

> With that fixed:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 


-- 
Best regards,
Marek Vasut

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  2019-05-03 15:18     ` Marek Vasut
@ 2019-05-03 18:13       ` Geert Uytterhoeven
  -1 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2019-05-03 18:13 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Linux ARM, Marek Vasut, Geert Uytterhoeven, Simon Horman, Linux-Renesas

Hi Marek,

On Fri, May 3, 2019 at 5:18 PM Marek Vasut <marek.vasut@gmail.com> wrote:
> On 5/3/19 2:36 PM, Geert Uytterhoeven wrote:
> >>  &rwdt {
> >> @@ -309,6 +314,8 @@
> >>  };
> >>
> >>  &iic3 {
> >> +       pinctrl-names = "default";
> >> +       pinctrl-0 = <&pmic_irq_pins>;
> >
> > Given Blanche has a single device connected to irq2, I think it makes
> > sense to move the pinctrl properties to the pmic node below.
>
> It makes blanche somehow inconsistent with the other boards, but if you
> insist ... ?

Typically the pinctrl properties are part of the device node that uses them.
For the other boards, that's not possible, as they are shared by all PMIC
nodes. Hence the other boards are the exceptions, actually ;-)

Note that for multi-PMIC boards, adding the pinctrl properties to a single
PMIC node won't work, as that would break:
  1. The case where the driver for that PMIC is not compiled in,
  2. The R-Car Gen2 regulator quirk.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-03 18:13       ` Geert Uytterhoeven
  0 siblings, 0 replies; 10+ messages in thread
From: Geert Uytterhoeven @ 2019-05-03 18:13 UTC (permalink / raw)
  To: Marek Vasut
  Cc: Linux-Renesas, Simon Horman, Geert Uytterhoeven, Linux ARM, Marek Vasut

Hi Marek,

On Fri, May 3, 2019 at 5:18 PM Marek Vasut <marek.vasut@gmail.com> wrote:
> On 5/3/19 2:36 PM, Geert Uytterhoeven wrote:
> >>  &rwdt {
> >> @@ -309,6 +314,8 @@
> >>  };
> >>
> >>  &iic3 {
> >> +       pinctrl-names = "default";
> >> +       pinctrl-0 = <&pmic_irq_pins>;
> >
> > Given Blanche has a single device connected to irq2, I think it makes
> > sense to move the pinctrl properties to the pmic node below.
>
> It makes blanche somehow inconsistent with the other boards, but if you
> insist ... ?

Typically the pinctrl properties are part of the device node that uses them.
For the other boards, that's not possible, as they are shared by all PMIC
nodes. Hence the other boards are the exceptions, actually ;-)

Note that for multi-PMIC boards, adding the pinctrl properties to a single
PMIC node won't work, as that would break:
  1. The case where the driver for that PMIC is not compiled in,
  2. The R-Car Gen2 regulator quirk.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  2019-05-03 18:13       ` Geert Uytterhoeven
@ 2019-05-15  8:25         ` Marek Vasut
  -1 siblings, 0 replies; 10+ messages in thread
From: Marek Vasut @ 2019-05-15  8:25 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Linux ARM, Marek Vasut, Geert Uytterhoeven, Simon Horman, Linux-Renesas

On 5/3/19 8:13 PM, Geert Uytterhoeven wrote:
> Hi Marek,

Hi,

> On Fri, May 3, 2019 at 5:18 PM Marek Vasut <marek.vasut@gmail.com> wrote:
>> On 5/3/19 2:36 PM, Geert Uytterhoeven wrote:
>>>>  &rwdt {
>>>> @@ -309,6 +314,8 @@
>>>>  };
>>>>
>>>>  &iic3 {
>>>> +       pinctrl-names = "default";
>>>> +       pinctrl-0 = <&pmic_irq_pins>;
>>>
>>> Given Blanche has a single device connected to irq2, I think it makes
>>> sense to move the pinctrl properties to the pmic node below.
>>
>> It makes blanche somehow inconsistent with the other boards, but if you
>> insist ... ?
> 
> Typically the pinctrl properties are part of the device node that uses them.
> For the other boards, that's not possible, as they are shared by all PMIC
> nodes. Hence the other boards are the exceptions, actually ;-)
> 
> Note that for multi-PMIC boards, adding the pinctrl properties to a single
> PMIC node won't work, as that would break:
>   1. The case where the driver for that PMIC is not compiled in,
>   2. The R-Car Gen2 regulator quirk.

Well it wouldn't work because it's shared by two PMICs and thus two
driver instances in the first place.

-- 
Best regards,
Marek Vasut

^ permalink raw reply	[flat|nested] 10+ messages in thread
* Re: [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux
@ 2019-05-15  8:25         ` Marek Vasut
  0 siblings, 0 replies; 10+ messages in thread
From: Marek Vasut @ 2019-05-15  8:25 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Linux-Renesas, Simon Horman, Geert Uytterhoeven, Linux ARM, Marek Vasut

On 5/3/19 8:13 PM, Geert Uytterhoeven wrote:
> Hi Marek,

Hi,

> On Fri, May 3, 2019 at 5:18 PM Marek Vasut <marek.vasut@gmail.com> wrote:
>> On 5/3/19 2:36 PM, Geert Uytterhoeven wrote:
>>>>  &rwdt {
>>>> @@ -309,6 +314,8 @@
>>>>  };
>>>>
>>>>  &iic3 {
>>>> +       pinctrl-names = "default";
>>>> +       pinctrl-0 = <&pmic_irq_pins>;
>>>
>>> Given Blanche has a single device connected to irq2, I think it makes
>>> sense to move the pinctrl properties to the pmic node below.
>>
>> It makes blanche somehow inconsistent with the other boards, but if you
>> insist ... ?
> 
> Typically the pinctrl properties are part of the device node that uses them.
> For the other boards, that's not possible, as they are shared by all PMIC
> nodes. Hence the other boards are the exceptions, actually ;-)
> 
> Note that for multi-PMIC boards, adding the pinctrl properties to a single
> PMIC node won't work, as that would break:
>   1. The case where the driver for that PMIC is not compiled in,
>   2. The R-Car Gen2 regulator quirk.

Well it wouldn't work because it's shared by two PMICs and thus two
driver instances in the first place.

-- 
Best regards,
Marek Vasut

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-05-15  8:25 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-02 14:06 [PATCH] ARM: dts: r8a779x: Configure PMIC IRQ pinmux marek.vasut
2019-05-02 14:06 ` marek.vasut
2019-05-03 12:36 ` Geert Uytterhoeven
2019-05-03 12:36   ` Geert Uytterhoeven
2019-05-03 15:18   ` Marek Vasut
2019-05-03 15:18     ` Marek Vasut
2019-05-03 18:13     ` Geert Uytterhoeven
2019-05-03 18:13       ` Geert Uytterhoeven
2019-05-15  8:25       ` Marek Vasut
2019-05-15  8:25         ` Marek Vasut

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.