* Only 1 CPU was detected
@ 2017-09-28 5:12 Hongjiang Zhang
2017-09-28 6:12 ` Juergen Gross
0 siblings, 1 reply; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 5:12 UTC (permalink / raw)
To: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 2743 bytes --]
Hi all,
I install Xen 4.8 on Ubuntu 17.04 (kernel is updated to 4.12). But I found only 1 CPU was detected.
I thought it is caused by some BIOS settings, so I enabled x2APIC in BIOS, unfortunately, Linux hangs during booting after printing "Loading initial ramdisk ...".
I have to disable x2APIC finally, but I only have 1 CPU when system is up. Does anyone encounter this issue?
The whole dmesg was attached. Xen related output.
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x000000007a088fff] usable
[ 0.000000] Xen: [mem 0x000000007a089000-0x000000007a188fff] reserved
[ 0.000000] Xen: [mem 0x000000007a189000-0x000000007a288fff] type 20
[ 0.000000] Xen: [mem 0x000000007a289000-0x000000007af0afff] reserved
[ 0.000000] Xen: [mem 0x000000007af0b000-0x000000007b93afff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000007b93b000-0x000000007bab4fff] ACPI data
[ 0.000000] Xen: [mem 0x000000007bab5000-0x000000007bae8fff] usable
[ 0.000000] Xen: [mem 0x000000007bae9000-0x000000007bafefff] ACPI data
[ 0.000000] Xen: [mem 0x000000007baff000-0x000000007bafffff] usable
[ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000feda8000-0x00000000fedabfff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff310000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000187fffffff] usable
[ 0.000000] Hypervisor detected: Xen PV
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.0 (preserve-AD)
[ 0.000000] xen: PV spinlocks enabled
[ 0.004000] xen:events: Using FIFO-based ABI
[ 0.004000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.004000] Xen: using vcpuop timer interface
[ 0.004000] installing Xen timer for CPU 0
[ 0.103141] xen:grant_table: Grant tables using version 1 layout
[ 0.105359] xen:balloon: Initialising balloon driver
[ 0.118198] xen_balloon: Initialising balloon driver
[ 0.169556] clocksource: Switched to clocksource xen
[ 0.914651] xen_acpi_processor_init+0x5f/0x1f6
[ 0.965809] xen_netfront: Initialising Xen virtual ethernet driver
[ 2.011142] genirq: Flags mismatch irq 8. 00000080 (rtc0) vs. 00000000 (xen-pcpu)
[ 6.722743] systemd[1]: Detected virtualization xen.
[ 21.072897] xen:xen_evtchn: Event-channel device installed
[ 21.204752] xen:manage: Unable to read sysrq code in control/sysrq
Thanks
Hongjiang Zhang
[-- Attachment #1.2: Type: text/html, Size: 6880 bytes --]
[-- Attachment #2: dmesg.log --]
[-- Type: application/octet-stream, Size: 56989 bytes --]
[ 0.000000] Linux version 4.12.0-041200-generic (kernel@gloin) (gcc version 6.3.0 20170618 (Ubuntu 6.3.0-19ubuntu1) ) #201707022031 SMP Mon Jul 3 00:32:52 UTC 2017
[ 0.000000] Command line: placeholder root=UUID=651bbef1-2c39-4495-820f-a10b8a77a99f ro acpi=off
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] Released 0 page(s)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x000000007a088fff] usable
[ 0.000000] Xen: [mem 0x000000007a089000-0x000000007a188fff] reserved
[ 0.000000] Xen: [mem 0x000000007a189000-0x000000007a288fff] type 20
[ 0.000000] Xen: [mem 0x000000007a289000-0x000000007af0afff] reserved
[ 0.000000] Xen: [mem 0x000000007af0b000-0x000000007b93afff] ACPI NVS
[ 0.000000] Xen: [mem 0x000000007b93b000-0x000000007bab4fff] ACPI data
[ 0.000000] Xen: [mem 0x000000007bab5000-0x000000007bae8fff] usable
[ 0.000000] Xen: [mem 0x000000007bae9000-0x000000007bafefff] ACPI data
[ 0.000000] Xen: [mem 0x000000007baff000-0x000000007bafffff] usable
[ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved
[ 0.000000] Xen: [mem 0x00000000feda8000-0x00000000fedabfff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff310000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000187fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[ 0.000000] Hypervisor detected: Xen PV
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1880000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR: Disabled
[ 0.000000] x86/PAT: MTRRs disabled, skipping PAT initialization too.
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC
[ 0.000000] e820: last_pfn = 0x7bb00 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 24576
[ 0.000000] BRK [0x02514000, 0x02514fff] PGTABLE
[ 0.000000] BRK [0x02515000, 0x02515fff] PGTABLE
[ 0.000000] BRK [0x02516000, 0x02516fff] PGTABLE
[ 0.000000] BRK [0x02517000, 0x02517fff] PGTABLE
[ 0.000000] BRK [0x02518000, 0x02518fff] PGTABLE
[ 0.000000] BRK [0x02519000, 0x02519fff] PGTABLE
[ 0.000000] BRK [0x0251a000, 0x0251afff] PGTABLE
[ 0.000000] BRK [0x0251b000, 0x0251bfff] PGTABLE
[ 0.000000] BRK [0x0251c000, 0x0251cfff] PGTABLE
[ 0.000000] BRK [0x0251d000, 0x0251dfff] PGTABLE
[ 0.000000] BRK [0x0251e000, 0x0251efff] PGTABLE
[ 0.000000] BRK [0x0251f000, 0x0251ffff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x04000000-0x06c39fff]
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000187fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x17afd0e000-0x17afd38fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000187fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007a088fff]
[ 0.000000] node 0: [mem 0x000000007bab5000-0x000000007bae8fff]
[ 0.000000] node 0: [mem 0x000000007baff000-0x000000007bafffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000187fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000187fffffff]
[ 0.000000] On node 0 totalpages: 25141341
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7747 pages used for memmap
[ 0.000000] DMA32 zone: 495806 pages, LIFO batch:31
[ 0.000000] Normal zone: 385024 pages used for memmap
[ 0.000000] Normal zone: 24641536 pages, LIFO batch:31
[ 0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[ 0.000000] Remapped 548770 page(s)
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] smpboot: Boot CPU (id 255) not listed by BIOS
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a089000-0x7a188fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a189000-0x7a288fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7a289000-0x7af0afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7af0b000-0x7b93afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b93b000-0x7bab4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bae9000-0x7bafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bb00000-0x7fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfeda7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeda8000-0xfedabfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedac000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xff30ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff310000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xfeda7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.8.0 (preserve-AD)
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 39 pages/cpu @ffff881835a00000 s118936 r8192 d32616 u2097152
[ 0.000000] pcpu-alloc: s118936 r8192 d32616 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] xen: PV spinlocks enabled
[ 0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 24748485
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: placeholder root=UUID=651bbef1-2c39-4495-820f-a10b8a77a99f ro acpi=off
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] software IO TLB [mem 0x1831a00000-0x1835a00000] (64MB) mapped at [ffff881831a00000-ffff8818359fffff]
[ 0.000000] Memory: 97246400K/100565364K available (9111K kernel code, 2481K rwdata, 3976K rodata, 2260K init, 2392K bss, 3318964K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] ftrace: allocating 37003 entries in 145 pages
[ 0.004000] Hierarchical RCU implementation.
[ 0.004000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
[ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.004000] Using NULL legacy PIC
[ 0.004000] NR_IRQS:524544 nr_irqs:32 0
[ 0.004000] xen:events: Using FIFO-based ABI
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.004000] Xen: using vcpuop timer interface
[ 0.004000] installing Xen timer for CPU 0
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.004004] tsc: Detected 1999.872 MHz processor
[ 0.004092] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.08 BogoMIPS (lpj=8000160)
[ 0.004141] pid_max: default: 32768 minimum: 301
[ 0.004493] Security Framework initialized
[ 0.004581] Yama: becoming mindful.
[ 0.004690] AppArmor: AppArmor initialized
[ 0.020666] Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
[ 0.051238] Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.062825] Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.063186] Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.064345] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.064438] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.064536] CPU: Physical Processor ID: 0
[ 0.064623] CPU: Processor Core ID: 0
[ 0.064711] mce: CPU supports 2 MCE banks
[ 0.064822] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.064912] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.092825] Freeing SMP alternatives memory: 32K
[ 0.094305] cpu 0 spinlock event irq 1
[ 0.094397] smpboot: Max logical packages: 1
[ 0.094488] VPMU disabled by hypervisor.
[ 0.094660] Performance Events: Broadwell events, PMU not available due to virtualization, using software events only.
[ 0.095583] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.095677] NMI watchdog: Shutting down hard lockup detector on all cpus
[ 0.095781] smp: Bringing up secondary CPUs ...
[ 0.095870] smp: Brought up 1 node, 1 CPU
[ 0.095983] sched_clock: Marking stable (92000000, 0)->(9282903104, -9190903104)
[ 0.099393] devtmpfs: initialized
[ 0.099527] x86/mm: Memory block size: 2048MB
[ 0.101299] evm: security.selinux
[ 0.101384] evm: security.SMACK64
[ 0.101469] evm: security.SMACK64EXEC
[ 0.101554] evm: security.SMACK64TRANSMUTE
[ 0.101641] evm: security.SMACK64MMAP
[ 0.101726] evm: security.ima
[ 0.101810] evm: security.capability
[ 0.101942] PM: Registering ACPI NVS region [mem 0x7af0b000-0x7b93afff] (10682368 bytes)
[ 0.102385] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.102513] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.102649] pinctrl core: initialized pinctrl subsystem
[ 0.102858] RTC time: 3:01:50, date: 09/27/17
[ 0.103045] NET: Registered protocol family 16
[ 0.103141] xen:grant_table: Grant tables using version 1 layout
[ 0.103240] Grant table initialized
[ 0.103652] PCI: Using configuration type 1 for base access
[ 0.103928] PCI: Dell System detected, enabling pci=bfsort.
[ 0.105266] ACPI: Interpreter disabled.
[ 0.105359] xen:balloon: Initialising balloon driver
[ 0.118198] xen_balloon: Initialising balloon driver
[ 0.118355] vgaarb: loaded
[ 0.118610] SCSI subsystem initialized
[ 0.118729] libata version 3.00 loaded.
[ 0.118765] usbcore: registered new interface driver usbfs
[ 0.118861] usbcore: registered new interface driver hub
[ 0.118958] usbcore: registered new device driver usb
[ 0.119094] EDAC MC: Ver: 3.0.0
[ 0.119276] PCI: Probing PCI hardware
[ 0.119363] PCI: root bus 00: using default resources
[ 0.119364] PCI: Probing PCI hardware (bus 00)
[ 0.119387] PCI host bridge to bus 0000:00
[ 0.119477] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.119570] pci_bus 0000:00: root bus resource [mem 0x00000000-0x3fffffffffff]
[ 0.119687] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.119824] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000
[ 0.119978] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400
[ 0.120078] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120156] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400
[ 0.120256] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.120319] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400
[ 0.120417] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.120479] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400
[ 0.120579] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.120649] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000
[ 0.120777] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000
[ 0.120920] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000
[ 0.121048] pci 0000:00:05.4: [8086:6f2c] type 00 class 0x080020
[ 0.121062] pci 0000:00:05.4: reg 0x10: [mem 0x92514000-0x92514fff]
[ 0.121235] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
[ 0.121340] pci 0000:00:11.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.121468] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601
[ 0.121497] pci 0000:00:11.4: reg 0x10: [io 0x4078-0x407f]
[ 0.121511] pci 0000:00:11.4: reg 0x14: [io 0x408c-0x408f]
[ 0.121526] pci 0000:00:11.4: reg 0x18: [io 0x4070-0x4077]
[ 0.121541] pci 0000:00:11.4: reg 0x1c: [io 0x4088-0x408b]
[ 0.121555] pci 0000:00:11.4: reg 0x20: [io 0x4040-0x405f]
[ 0.121570] pci 0000:00:11.4: reg 0x24: [mem 0x92511000-0x925117ff]
[ 0.121649] pci 0000:00:11.4: PME# supported from D3hot
[ 0.121729] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
[ 0.121762] pci 0000:00:14.0: reg 0x10: [mem 0x92500000-0x9250ffff 64bit]
[ 0.121880] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.121943] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
[ 0.121976] pci 0000:00:16.0: reg 0x10: [mem 0x3bffff03000-0x3bffff0300f 64bit]
[ 0.122096] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.122163] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
[ 0.122196] pci 0000:00:16.1: reg 0x10: [mem 0x3bffff02000-0x3bffff0200f 64bit]
[ 0.122316] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
[ 0.122398] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
[ 0.122428] pci 0000:00:1a.0: reg 0x10: [mem 0x92513000-0x925133ff]
[ 0.122578] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.122658] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
[ 0.122780] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.122810] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.122902] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.123055] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400
[ 0.123179] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.123205] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 0.123296] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 0.123450] pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
[ 0.123573] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.123599] pci 0000:00:1c.7: Enabling MPC IRBNCE
[ 0.123689] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled
[ 0.123836] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
[ 0.123866] pci 0000:00:1d.0: reg 0x10: [mem 0x92512000-0x925123ff]
[ 0.124017] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.124091] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
[ 0.124331] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
[ 0.124359] pci 0000:00:1f.2: reg 0x10: [io 0x4068-0x406f]
[ 0.124373] pci 0000:00:1f.2: reg 0x14: [io 0x4084-0x4087]
[ 0.124388] pci 0000:00:1f.2: reg 0x18: [io 0x4060-0x4067]
[ 0.124402] pci 0000:00:1f.2: reg 0x1c: [io 0x4080-0x4083]
[ 0.124416] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
[ 0.124431] pci 0000:00:1f.2: reg 0x24: [mem 0x92510000-0x925107ff]
[ 0.124508] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.124639] pci 0000:03:00.0: [1000:005d] type 00 class 0x010400
[ 0.124654] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.124672] pci 0000:03:00.0: reg 0x14: [mem 0x92400000-0x9240ffff 64bit]
[ 0.124690] pci 0000:03:00.0: reg 0x1c: [mem 0x92300000-0x923fffff 64bit]
[ 0.124713] pci 0000:03:00.0: reg 0x30: [mem 0xfff00000-0xffffffff pref]
[ 0.124795] pci 0000:03:00.0: supports D1 D2
[ 0.124860] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.124952] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.124956] pci 0000:00:01.0: bridge window [mem 0x92300000-0x924fffff]
[ 0.125019] pci 0000:00:02.0: PCI bridge to [bus 04]
[ 0.125188] pci 0000:01:00.0: [8086:10fb] type 00 class 0x020000
[ 0.125210] pci 0000:01:00.0: reg 0x10: [mem 0x92100000-0x921fffff 64bit]
[ 0.125222] pci 0000:01:00.0: reg 0x18: [io 0x2020-0x203f]
[ 0.125252] pci 0000:01:00.0: reg 0x20: [mem 0x92204000-0x92207fff 64bit]
[ 0.125265] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.125335] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.125422] pci 0000:01:00.1: [8086:10fb] type 00 class 0x020000
[ 0.125444] pci 0000:01:00.1: reg 0x10: [mem 0x92000000-0x920fffff 64bit]
[ 0.125456] pci 0000:01:00.1: reg 0x18: [io 0x2000-0x201f]
[ 0.125486] pci 0000:01:00.1: reg 0x20: [mem 0x92200000-0x92203fff 64bit]
[ 0.125498] pci 0000:01:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.125569] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.125645] pci 0000:00:03.0: PCI bridge to [bus 01-02]
[ 0.125739] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.125743] pci 0000:00:03.0: bridge window [mem 0x92000000-0x922fffff]
[ 0.125750] pci 0000:00:03.0: bridge window [mem 0x91a00000-0x91dfffff 64bit pref]
[ 0.125808] pci 0000:00:03.2: PCI bridge to [bus 05]
[ 0.125965] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.126155] pci 0000:07:00.0: [8086:1521] type 00 class 0x020000
[ 0.126177] pci 0000:07:00.0: reg 0x10: [mem 0x91e80000-0x91efffff]
[ 0.126228] pci 0000:07:00.0: reg 0x1c: [mem 0x91f04000-0x91f07fff]
[ 0.126279] pci 0000:07:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.126381] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.126493] pci 0000:07:00.1: [8086:1521] type 00 class 0x020000
[ 0.126515] pci 0000:07:00.1: reg 0x10: [mem 0x91e00000-0x91e7ffff]
[ 0.126566] pci 0000:07:00.1: reg 0x1c: [mem 0x91f00000-0x91f03fff]
[ 0.126617] pci 0000:07:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.126718] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
[ 0.126898] pci 0000:00:1c.4: PCI bridge to [bus 07]
[ 0.126994] pci 0000:00:1c.4: bridge window [mem 0x91e00000-0x91ffffff]
[ 0.127394] pci 0000:08:00.0: [1912:001d] type 01 class 0x060400
[ 0.129802] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.140314] pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
[ 0.140414] pci 0000:00:1c.7: bridge window [mem 0x91000000-0x919fffff]
[ 0.140423] pci 0000:00:1c.7: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.141645] pci 0000:09:00.0: [1912:001d] type 01 class 0x060400
[ 0.144490] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.147607] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
[ 0.147904] pci 0000:08:00.0: bridge window [mem 0x91000000-0x919fffff]
[ 0.148037] pci 0000:08:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.149345] pci 0000:0a:00.0: [1912:001a] type 01 class 0x060400
[ 0.153676] pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
[ 0.154002] pci 0000:09:00.0: bridge window [mem 0x91000000-0x918fffff]
[ 0.154159] pci 0000:09:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.155319] pci 0000:0b:00.0: [102b:0534] type 00 class 0x030000
[ 0.155800] pci 0000:0b:00.0: reg 0x10: [mem 0x90000000-0x90ffffff pref]
[ 0.156081] pci 0000:0b:00.0: reg 0x14: [mem 0x91800000-0x91803fff]
[ 0.156362] pci 0000:0b:00.0: reg 0x18: [mem 0x91000000-0x917fffff]
[ 0.159101] pci 0000:0b:00.0: vgaarb: setting as boot VGA device
[ 0.159197] pci 0000:0b:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.166572] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 0.166909] pci 0000:0a:00.0: bridge window [mem 0x91000000-0x918fffff]
[ 0.167066] pci 0000:0a:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.167958] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 0c
[ 0.168597] PCI: pci_cache_line_size set to 64 bytes
[ 0.169000] e820: reserve RAM buffer [mem 0x7a089000-0x7bffffff]
[ 0.169001] e820: reserve RAM buffer [mem 0x7bae9000-0x7bffffff]
[ 0.169002] e820: reserve RAM buffer [mem 0x7bb00000-0x7bffffff]
[ 0.169104] NetLabel: Initializing
[ 0.169191] NetLabel: domain hash size = 128
[ 0.169279] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.169383] NetLabel: unlabeled traffic allowed by default
[ 0.169556] clocksource: Switched to clocksource xen
[ 0.182651] VFS: Disk quotas dquot_6.6.0
[ 0.182752] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.182866] hugetlbfs: disabling because there are no supported hugepage sizes
[ 0.183031] AppArmor: AppArmor Filesystem Enabled
[ 0.183158] pnp: PnP ACPI: disabled
[ 0.184303] pci 0000:03:00.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: no compatible bridge window
[ 0.184428] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.184552] pci 0000:01:00.1: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.184677] pci 0000:00:11.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: address conflict with Reserved [mem 0xff310000-0xffffffff]
[ 0.184807] pci 0000:07:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.184931] pci 0000:07:00.1: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.185873] pci 0000:00:11.0: BAR 6: assigned [mem 0x92520000-0x9252ffff pref]
[ 0.185992] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00100000 pref]
[ 0.186087] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00100000 pref]
[ 0.186204] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.186295] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.186392] pci 0000:00:01.0: bridge window [mem 0x92300000-0x924fffff]
[ 0.186495] pci 0000:00:02.0: PCI bridge to [bus 04]
[ 0.186598] pci 0000:01:00.0: BAR 6: assigned [mem 0x92280000-0x922fffff pref]
[ 0.186715] pci 0000:01:00.1: BAR 6: assigned [mem 0x91a00000-0x91a7ffff pref]
[ 0.186843] pci 0000:00:03.0: PCI bridge to [bus 01-02]
[ 0.186935] pci 0000:00:03.0: bridge window [io 0x2000-0x2fff]
[ 0.187031] pci 0000:00:03.0: bridge window [mem 0x92000000-0x922fffff]
[ 0.187128] pci 0000:00:03.0: bridge window [mem 0x91a00000-0x91dfffff 64bit pref]
[ 0.187251] pci 0000:00:03.2: PCI bridge to [bus 05]
[ 0.187354] pci 0000:00:1c.0: PCI bridge to [bus 06]
[ 0.187460] pci 0000:07:00.0: BAR 6: assigned [mem 0x91f80000-0x91ffffff pref]
[ 0.187577] pci 0000:07:00.1: BAR 6: no space for [mem size 0x00080000 pref]
[ 0.187671] pci 0000:07:00.1: BAR 6: failed to assign [mem size 0x00080000 pref]
[ 0.187789] pci 0000:00:1c.4: PCI bridge to [bus 07]
[ 0.187883] pci 0000:00:1c.4: bridge window [mem 0x91e00000-0x91ffffff]
[ 0.187988] pci 0000:0a:00.0: PCI bridge to [bus 0b]
[ 0.188224] pci 0000:0a:00.0: bridge window [mem 0x91000000-0x918fffff]
[ 0.188416] pci 0000:0a:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.188739] pci 0000:09:00.0: PCI bridge to [bus 0a-0b]
[ 0.188983] pci 0000:09:00.0: bridge window [mem 0x91000000-0x918fffff]
[ 0.189174] pci 0000:09:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.189497] pci 0000:08:00.0: PCI bridge to [bus 09-0c]
[ 0.189723] pci 0000:08:00.0: bridge window [mem 0x91000000-0x919fffff]
[ 0.189902] pci 0000:08:00.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.190245] pci 0000:00:1c.7: PCI bridge to [bus 08-0c]
[ 0.190344] pci 0000:00:1c.7: bridge window [mem 0x91000000-0x919fffff]
[ 0.190441] pci 0000:00:1c.7: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.190567] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.190568] pci_bus 0000:00: resource 5 [mem 0x00000000-0x3fffffffffff]
[ 0.190569] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.190570] pci_bus 0000:03: resource 1 [mem 0x92300000-0x924fffff]
[ 0.190572] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.190573] pci_bus 0000:01: resource 1 [mem 0x92000000-0x922fffff]
[ 0.190574] pci_bus 0000:01: resource 2 [mem 0x91a00000-0x91dfffff 64bit pref]
[ 0.190575] pci_bus 0000:07: resource 1 [mem 0x91e00000-0x91ffffff]
[ 0.190576] pci_bus 0000:08: resource 1 [mem 0x91000000-0x919fffff]
[ 0.190577] pci_bus 0000:08: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.190578] pci_bus 0000:09: resource 1 [mem 0x91000000-0x919fffff]
[ 0.190579] pci_bus 0000:09: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.190580] pci_bus 0000:0a: resource 1 [mem 0x91000000-0x918fffff]
[ 0.190581] pci_bus 0000:0a: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.190582] pci_bus 0000:0b: resource 1 [mem 0x91000000-0x918fffff]
[ 0.190583] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.190619] NET: Registered protocol family 2
[ 0.191349] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.192298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.192568] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.192946] UDP hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.193630] UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
[ 0.194099] NET: Registered protocol family 1
[ 0.194236] pci 0000:00:14.0: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 0.194432] pci 0000:00:1a.0: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 0.194592] pci 0000:00:1d.0: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 0.194745] pci 0000:03:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.194875] PCI: CLS mismatch (64 != 128), using 64 bytes
[ 0.195110] pci 0000:0b:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.195270] Unpacking initramfs...
[ 0.901487] Freeing initrd memory: 45288K
[ 0.901658] Intel CQM monitoring enabled
[ 0.901746] Intel MBM enabled
[ 0.901884] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.902029] Scanning for low memory corruption every 60 seconds
[ 0.902422] audit: initializing netlink subsys (disabled)
[ 0.902868] Initialise system trusted keyrings
[ 0.902966] Key type blacklist registered
[ 0.903066] audit: type=2000 audit(1506481311.073:1): state=initialized audit_enabled=0 res=1
[ 0.903197] workingset: timestamp_bits=36 max_order=25 bucket_order=0
[ 0.904420] zbud: loaded
[ 0.904929] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.905146] fuse init (API version 7.26)
[ 0.906067] Key type asymmetric registered
[ 0.906157] Asymmetric key parser 'x509' registered
[ 0.906256] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.906391] io scheduler noop registered
[ 0.906477] io scheduler deadline registered
[ 0.906590] io scheduler cfq registered (default)
[ 0.906783] pcieport 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.907035] pcieport 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.907263] pcieport 0000:00:03.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.907487] pcieport 0000:00:03.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.907707] pcieport 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.907950] pcieport 0000:00:1c.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 0.908189] pcieport 0000:00:1c.7: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 0.910687] pcieport 0000:00:01.0: Signaling PME with IRQ 9
[ 0.910800] pcieport 0000:00:02.0: Signaling PME with IRQ 10
[ 0.910918] pcieport 0000:00:03.0: Signaling PME with IRQ 11
[ 0.911032] pcieport 0000:00:03.2: Signaling PME with IRQ 12
[ 0.911148] pcieport 0000:00:1c.0: Signaling PME with IRQ 13
[ 0.911262] pcieport 0000:00:1c.4: Signaling PME with IRQ 14
[ 0.911380] pcieport 0000:00:1c.7: Signaling PME with IRQ 15
[ 0.911540] intel_idle: MWAIT substates: 0x2120
[ 0.911541] intel_idle: v0.4.1 model 0x4F
[ 0.911544] intel_idle: intel_idle yielding to none
[ 0.911710] ------------[ cut here ]------------
[ 0.911802] WARNING: CPU: 0 PID: 1 at /home/kernel/COD/linux/mm/page_alloc.c:3700 __alloc_pages_slowpath+0xaf9/0xe10
[ 0.911926] Modules linked in:
[ 0.912013] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.12.0-041200-generic #201707022031
[ 0.912132] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[ 0.912250] task: ffff881824e1c380 task.stack: ffffc9004c468000
[ 0.912342] RIP: e030:__alloc_pages_slowpath+0xaf9/0xe10
[ 0.912432] RSP: e02b:ffffc9004c46bb38 EFLAGS: 00010246
[ 0.912522] RAX: 0000000000000000 RBX: 00000000fffedbea RCX: 0000000000000000
[ 0.912617] RDX: ffffc9004c46bc70 RSI: 0000000000000011 RDI: 0000000000000000
[ 0.912711] RBP: ffffc9004c46bc60 R08: 0000000000000000 R09: fffffffffffe0f8b
[ 0.912806] R10: 0000000000000000 R11: 0000000000000002 R12: 000000000140c0c0
[ 0.912900] R13: 0000000000000000 R14: 0000000000000011 R15: 0000000000000000
[ 0.912999] FS: 0000000000000000(0000) GS:ffff881835a00000(0000) knlGS:0000000000000000
[ 0.913117] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.913208] CR2: 0000000000000000 CR3: 0000000001e09000 CR4: 0000000000042660
[ 0.913304] Call Trace:
[ 0.913392] ? proc_mkdir_data+0x67/0x90
[ 0.913480] ? proc_mkdir+0x15/0x20
[ 0.913584] ? register_handler_proc+0xf9/0x120
[ 0.913673] ? proc_create_data+0x76/0xb0
[ 0.913761] __alloc_pages_nodemask+0x233/0x250
[ 0.913853] alloc_page_interleave+0x3a/0x90
[ 0.913941] alloc_pages_current+0xf8/0x140
[ 0.914032] ? set_debug_rodata+0x17/0x17
[ 0.914121] kmalloc_order+0x18/0x40
[ 0.914207] kmalloc_order_trace+0x24/0xa0
[ 0.914295] ? set_debug_rodata+0x17/0x17
[ 0.914383] __kmalloc+0x1c7/0x1e0
[ 0.914469] ? set_debug_rodata+0x17/0x17
[ 0.914559] kmalloc_array.constprop.4+0x28/0x30
[ 0.914651] xen_acpi_processor_init+0x5f/0x1f6
[ 0.914740] ? get_max_acpi_id+0xd1/0xd1
[ 0.914827] do_one_initcall+0x52/0x1a0
[ 0.914915] ? set_debug_rodata+0x17/0x17
[ 0.915002] kernel_init_freeable+0x1b2/0x24e
[ 0.915092] ? rest_init+0x80/0x80
[ 0.915178] kernel_init+0xe/0x100
[ 0.915265] ret_from_fork+0x25/0x30
[ 0.915350] Code: 8d 47 ff bb 01 00 00 00 c7 85 78 ff ff ff 00 00 00 00 41 bf 01 00 00 00 89 85 74 ff ff ff e9 8d fb ff ff 89 45 88 e9 5d fb ff ff <0f> ff e9 47 f5 ff ff 0f ff 89 f8 25 ff ff f7 ff 89 85 64 ff ff
[ 0.915539] ---[ end trace f29f757b5a96d427 ]---
[ 0.915847] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.936617] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.962494] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.963508] Linux agpgart interface v0.103
[ 0.965144] loop: module loaded
[ 0.965232] Invalid max_queues (4), will use default max: 1.
[ 0.965485] libphy: Fixed MDIO Bus: probed
[ 0.965584] tun: Universal TUN/TAP device driver, 1.6
[ 0.965700] PPP generic driver version 2.4.2
[ 0.965809] xen_netfront: Initialising Xen virtual ethernet driver
[ 0.965918] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.966013] ehci-pci: EHCI PCI platform driver
[ 0.966121] ehci-pci 0000:00:1a.0: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 0.966247] ehci-pci 0000:00:1a.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!
[ 0.966369] ehci-pci 0000:00:1a.0: init 0000:00:1a.0 fail, -19
[ 0.966474] ehci-pci 0000:00:1d.0: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 0.966599] ehci-pci 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[ 0.966720] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -19
[ 0.966828] ehci-platform: EHCI generic platform driver
[ 0.966922] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.967019] ohci-pci: OHCI PCI platform driver
[ 0.967118] ohci-platform: OHCI generic platform driver
[ 0.967212] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.967330] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 0.967483] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.967577] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.968792] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.968921] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.969030] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.969124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.969241] usb usb1: Product: xHCI Host Controller
[ 0.969332] usb usb1: Manufacturer: Linux 4.12.0-041200-generic xhci-hcd
[ 0.969425] usb usb1: SerialNumber: 0000:00:14.0
[ 0.969614] hub 1-0:1.0: USB hub found
[ 0.969717] hub 1-0:1.0: 15 ports detected
[ 0.970051] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.970143] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.970297] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.970390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.970507] usb usb2: Product: xHCI Host Controller
[ 0.970596] usb usb2: Manufacturer: Linux 4.12.0-041200-generic xhci-hcd
[ 0.970689] usb usb2: SerialNumber: 0000:00:14.0
[ 0.970844] hub 2-0:1.0: USB hub found
[ 0.970941] hub 2-0:1.0: 6 ports detected
[ 0.971174] i8042: PNP: No PS/2 controller found.
[ 0.971262] i8042: Probing ports directly.
[ 2.010189] i8042: No controller found
[ 2.010605] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd4540bbf4, max_idle_ns: 440795244679 ns
[ 2.010770] mousedev: PS/2 mouse device common for all mice
[ 2.011031] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 2.011142] genirq: Flags mismatch irq 8. 00000080 (rtc0) vs. 00000000 (xen-pcpu)
[ 2.011283] rtc_cmos: probe of rtc_cmos failed with error -16
[ 2.011381] i2c /dev entries driver
[ 2.011497] device-mapper: uevent: version 1.0.3
[ 2.011639] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.011766] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.011881] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 2.012216] NET: Registered protocol family 10
[ 2.017844] Segment Routing with IPv6
[ 2.017949] NET: Registered protocol family 17
[ 2.018043] Key type dns_resolver registered
[ 2.018171] dev_mcelog: Unable to init device /dev/mcelog (rc: -16)
[ 2.018291] RAS: Correctable Errors collector initialized.
[ 2.018473] registered taskstats version 1
[ 2.018575] Loading compiled-in X.509 certificates
[ 2.021948] Loaded X.509 cert 'Build time autogenerated kernel key: cb38adec16fd1234d264f14e905e123af69b2419'
[ 2.022088] zswap: loaded using pool lzo/zbud
[ 2.034444] Key type big_key registered
[ 2.034536] Key type trusted registered
[ 2.037056] Key type encrypted registered
[ 2.037148] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.037240] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 2.037355] evm: HMAC attrs: 0x1
[ 2.038883] Magic number: 1:325:8
[ 2.039015] hctosys: unable to open rtc device (rtc0)
[ 2.039133] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.039225] EDD information not available.
[ 2.039355] PM: Hibernation image not present or could not be loaded.
[ 2.040936] Freeing unused kernel memory: 2260K
[ 2.041025] Write protecting the kernel read-only data: 14336k
[ 2.045082] Freeing unused kernel memory: 1112K
[ 2.045240] Freeing unused kernel memory: 120K
[ 2.045338] x86/mm: Found insecure W+X mapping at address ffff880000000000/0xffff880000000000
[ 2.045461] ------------[ cut here ]------------
[ 2.045554] WARNING: CPU: 0 PID: 1 at /home/kernel/COD/linux/arch/x86/mm/dump_pagetables.c:236 note_page+0x630/0x7e0
[ 2.045685] Modules linked in:
[ 2.045771] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.12.0-041200-generic #201707022031
[ 2.045893] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.5.5 08/16/2017
[ 2.046011] task: ffff881824e1c380 task.stack: ffffc9004c468000
[ 2.046103] RIP: e030:note_page+0x630/0x7e0
[ 2.046190] RSP: e02b:ffffc9004c46bdf8 EFLAGS: 00010282
[ 2.046280] RAX: 0000000000000051 RBX: ffffc9004c46be90 RCX: ffffffff81e608e8
[ 2.046374] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000200
[ 2.046469] RBP: ffffc9004c46be30 R08: 0000000000000000 R09: 0000000000000230
[ 2.046563] R10: 0000000000000001 R11: 000000008232d601 R12: 0010000000000067
[ 2.046658] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000
[ 2.046766] FS: 0000000000000000(0000) GS:ffff881835a00000(0000) knlGS:0000000000000000
[ 2.046885] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.046976] CR2: 00007f09784a5971 CR3: 0000000001e09000 CR4: 0000000000042660
[ 2.047071] Call Trace:
[ 2.047156] ptdump_walk_pgd_level_core+0x3e7/0x490
[ 2.047246] ? 0xffffffff81000000
[ 2.047332] ptdump_walk_pgd_level_checkwx+0x17/0x20
[ 2.047423] mark_rodata_ro+0xf4/0x100
[ 2.047510] ? rest_init+0x80/0x80
[ 2.047596] kernel_init+0x2f/0x100
[ 2.047682] ret_from_fork+0x25/0x30
[ 2.047767] Code: 48 c7 43 28 00 00 00 00 48 89 43 20 e9 05 fd ff ff 48 8b 73 10 48 c7 c7 50 ae c9 81 c6 05 19 20 dd 00 01 48 89 f2 e8 17 91 13 00 <0f> ff e9 1f fa ff ff 48 8b 70 20 48 c7 c7 56 23 ca 81 e8 00 91
[ 2.047954] ---[ end trace f29f757b5a96d429 ]---
[ 2.085560] random: fast init done
[ 2.185841] x86/mm: Checked W+X mappings: FAILED, 4602 W+X pages found.
[ 2.247986] megasas: 07.701.17.00-rc1
[ 2.248117] megaraid_sas 0000:03:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 2.251698] pps_core: LinuxPPS API ver. 1 registered
[ 2.251789] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.252916] PTP clock support registered
[ 2.254974] dca service started, version 1.12.1
[ 2.260587] ahci 0000:00:11.4: version 3.0
[ 2.260600] ahci 0000:00:11.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 2.260828] ahci 0000:00:11.4: SSS flag set, parallel bus scan disabled
[ 2.278589] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 2.278712] ahci 0000:00:11.4: flags: 64bit ncq stag led clo pio slum part ems apst
[ 2.282937] megaraid_sas 0000:03:00.0: FW now in Ready state
[ 2.283136] megaraid_sas 0000:03:00.0: firmware supports msix : (96)
[ 2.283229] megaraid_sas 0000:03:00.0: current msix/online cpus : (1/1)
[ 2.283322] megaraid_sas 0000:03:00.0: RDPQ mode : (disabled)
[ 2.283414] megaraid_sas 0000:03:00.0: Current firmware maximum commands: 928 LDIO threshold: 0
[ 2.286160] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 2.286255] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 2.286368] igb 0000:07:00.0: can't find IRQ for PCI INT D; please try using pci=biosirq
[ 2.294896] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.0.0-k
[ 2.295016] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 2.296802] scsi host1: ahci
[ 2.297577] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[ 2.300970] ixgbe 0000:01:00.0: can't find IRQ for PCI INT B; please try using pci=biosirq
[ 2.322674] scsi host2: ahci
[ 2.337580] scsi host3: ahci
[ 2.345183] scsi host4: ahci
[ 2.345308] ata1: SATA max UDMA/133 abar m2048@0x92511000 port 0x92511100 irq 19
[ 2.345427] ata2: SATA max UDMA/133 abar m2048@0x92511000 port 0x92511180 irq 19
[ 2.345544] ata3: DUMMY
[ 2.345640] ata4: DUMMY
[ 2.345806] ahci 0000:00:1f.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 2.346019] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.351252] megaraid_sas 0000:03:00.0: FW supports sync cache : No
[ 2.356566] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x30 impl SATA mode
[ 2.356689] ahci 0000:00:1f.2: flags: 64bit ncq stag led clo pio slum part ems apst
[ 2.368102] mgag200 0000:0b:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 2.374633] AVX2 version of gcm_enc/dec engaged.
[ 2.374724] AES CTR mode by8 optimization enabled
[ 2.386799] megaraid_sas 0000:03:00.0: Init cmd success
[ 2.393589] scsi host5: ahci
[ 2.397594] scsi host6: ahci
[ 2.405573] scsi host7: ahci
[ 2.406022] igb 0000:07:00.0: added PHC on eth0
[ 2.406113] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 2.406207] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x2) 24:6e:96:2c:7d:dc
[ 2.406622] igb 0000:07:00.0: eth0: PBA No: G61346-016
[ 2.406712] igb 0000:07:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 2.406868] igb 0000:07:00.1: can't find IRQ for PCI INT C; please try using pci=biosirq
[ 2.409578] scsi host8: ahci
[ 2.409769] [TTM] Zone kernel: Available graphics memory: 48647606 kiB
[ 2.409864] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.409956] [TTM] Initializing pool allocator
[ 2.410046] [TTM] Initializing DMA pool allocator
[ 2.415549] megaraid_sas 0000:03:00.0: firmware type : Extended VD(240 VD)firmware
[ 2.415668] megaraid_sas 0000:03:00.0: controller type : MR(1024MB)
[ 2.415761] megaraid_sas 0000:03:00.0: Online Controller Reset(OCR) : Enabled
[ 2.415855] megaraid_sas 0000:03:00.0: Secure JBOD support : No
[ 2.421626] scsi host9: ahci
[ 2.429188] scsi host10: ahci
[ 2.429320] ata5: DUMMY
[ 2.429405] ata6: DUMMY
[ 2.429488] ata7: DUMMY
[ 2.429584] ata8: DUMMY
[ 2.429668] ata9: SATA max UDMA/133 abar m2048@0x92510000 port 0x92510300 irq 24
[ 2.429786] ata10: SATA max UDMA/133 abar m2048@0x92510000 port 0x92510380 irq 24
[ 2.481274] megaraid_sas 0000:03:00.0: INIT adapter done
[ 2.481370] megaraid_sas 0000:03:00.0: Jbod map is not supported megasas_setup_jbod_map 5092
[ 2.483569] usb 1-2: New USB device found, idVendor=0624, idProduct=0307
[ 2.483665] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.483760] usb 1-2: Product: Avocent DSRIQ-USB
[ 2.483848] usb 1-2: Manufacturer: Avocent
[ 2.545974] igb 0000:07:00.1: added PHC on eth1
[ 2.546066] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 2.546161] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x2) 24:6e:96:2c:7d:dd
[ 2.546575] igb 0000:07:00.1: eth1: PBA No: G61346-016
[ 2.546665] igb 0000:07:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
[ 2.548933] ixgbe 0000:01:00.0: Multiqueue Disabled: Rx Queue count = 1, Tx Queue count = 1 XDP Queue count = 0
[ 2.549187] ixgbe 0000:01:00.0: PCI Express bandwidth of 32GT/s available
[ 2.549280] ixgbe 0000:01:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[ 2.549692] ixgbe 0000:01:00.0: MAC: 2, PHY: 14, SFP+: 4, PBA No: G61346-016
[ 2.549787] ixgbe 0000:01:00.0: 24:6e:96:2c:7d:d8
[ 2.553615] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection
[ 2.553739] ixgbe 0000:01:00.1: can't find IRQ for PCI INT A; please try using pci=biosirq
[ 2.569670] fbcon: mgadrmfb (fb0) is primary device
[ 2.606380] usb 1-12: new high-speed USB device number 3 using xhci_hcd
[ 2.649861] igb 0000:07:00.0 eno3: renamed from eth0
[ 2.682005] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.683763] igb 0000:07:00.1 eno4: renamed from eth1
[ 2.728311] Console: switching to colour frame buffer device 128x48
[ 2.747089] mgag200 0000:0b:00.0: fb0: mgadrmfb frame buffer device
[ 2.747121] [drm] Initialized mgag200 1.0.0 20110418 for 0000:0b:00.0 on minor 0
[ 2.766233] usb 1-12: New USB device found, idVendor=413c, idProduct=a001
[ 2.766259] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.766282] usb 1-12: Product: Gadget USB HUB
[ 2.766297] usb 1-12: Manufacturer: no manufacturer
[ 2.766314] usb 1-12: SerialNumber: 0123456789
[ 2.766569] hub 1-12:1.0: USB hub found
[ 2.766651] hub 1-12:1.0: 6 ports detected
[ 2.778087] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.788268] usbcore: registered new interface driver usbhid
[ 2.788289] usbhid: USB HID core driver
[ 2.790233] input: Avocent Avocent DSRIQ-USB as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0624:0307.0001/input/input0
[ 2.849781] hid-generic 0003:0624:0307.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent Avocent DSRIQ-USB] on usb-0000:00:14.0-2/input0
[ 2.850101] input: Avocent Avocent DSRIQ-USB as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0624:0307.0002/input/input1
[ 2.894970] megaraid_sas 0000:03:00.0: pci id : (0x1000)/(0x005d)/(0x1028)/(0x1f49)
[ 2.895742] megaraid_sas 0000:03:00.0: unevenspan support : yes
[ 2.896502] megaraid_sas 0000:03:00.0: firmware crash dump : no
[ 2.897270] megaraid_sas 0000:03:00.0: jbod sync map : no
[ 2.898025] scsi host0: Avago SAS based MegaRAID driver
[ 2.911255] hid-generic 0003:0624:0307.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent Avocent DSRIQ-USB] on usb-0000:00:14.0-2/input1
[ 2.920349] scsi 0:2:0:0: Direct-Access DELL PERC H730 Mini 4.26 PQ: 0 ANSI: 5
[ 2.921288] scsi 0:2:1:0: Direct-Access DELL PERC H730 Mini 4.26 PQ: 0 ANSI: 5
[ 2.944027] sd 0:2:0:0: Attached scsi generic sg0 type 0
[ 2.944904] sd 0:2:0:0: [sda] 1170997248 512-byte logical blocks: (600 GB/558 GiB)
[ 2.946302] sd 0:2:0:0: [sda] Write Protect is off
[ 2.947108] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
[ 2.947201] sd 0:2:1:0: Attached scsi generic sg1 type 0
[ 2.948139] sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.949230] sd 0:2:1:0: [sdb] 125007036416 512-byte logical blocks: (64.0 TB/58.2 TiB)
[ 2.950231] sd 0:2:1:0: [sdb] Write Protect is off
[ 2.951010] sd 0:2:1:0: [sdb] Mode Sense: 1f 00 00 08
[ 2.951045] sd 0:2:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.963888] sda: sda1 sda2 sda3
[ 2.965142] sd 0:2:0:0: [sda] Attached SCSI disk
[ 2.995122] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.996569] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.997953] sd 0:2:1:0: [sdb] Attached SCSI disk
[ 3.013633] clocksource: Switched to clocksource tsc
[ 3.312464] ata9: SATA link down (SStatus 0 SControl 300)
[ 3.409597] usb 1-12.1: new high-speed USB device number 4 using xhci_hcd
[ 3.534170] usb 1-12.1: New USB device found, idVendor=0624, idProduct=0249
[ 3.534956] usb 1-12.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
[ 3.535739] usb 1-12.1: Product: Keyboard/Mouse Function
[ 3.536516] usb 1-12.1: Manufacturer: Avocent
[ 3.537300] usb 1-12.1: SerialNumber: 20121018
[ 3.540554] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.0/0003:0624:0249.0003/input/input2
[ 3.607838] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-12.1/input0
[ 3.610288] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.1/0003:0624:0249.0004/input/input3
[ 3.613624] hid-generic 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-12.1/input1
[ 3.617312] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12.1/1-12.1:1.2/0003:0624:0249.0005/input/input4
[ 3.620150] hid-generic 0003:0624:0249.0005: input,hidraw4: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-12.1/input2
[ 3.629402] ata10: SATA link down (SStatus 0 SControl 300)
[ 3.741446] ixgbe 0000:01:00.1: Multiqueue Disabled: Rx Queue count = 1, Tx Queue count = 1 XDP Queue count = 0
[ 3.742572] ixgbe 0000:01:00.1: PCI Express bandwidth of 32GT/s available
[ 3.743534] ixgbe 0000:01:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
[ 3.744780] ixgbe 0000:01:00.1: MAC: 2, PHY: 1, PBA No: G61346-016
[ 3.745693] ixgbe 0000:01:00.1: 24:6e:96:2c:7d:da
[ 3.752882] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection
[ 3.754957] ixgbe 0000:01:00.1 eno2: renamed from eth0
[ 3.759060] ixgbe 0000:01:00.0 eno1: renamed from eth2
[ 4.421563] raid6: sse2x1 gen() 7875 MB/s
[ 4.489559] raid6: sse2x1 xor() 5838 MB/s
[ 4.557557] raid6: sse2x2 gen() 9645 MB/s
[ 4.625557] raid6: sse2x2 xor() 6366 MB/s
[ 4.693556] raid6: sse2x4 gen() 11198 MB/s
[ 4.761556] raid6: sse2x4 xor() 7844 MB/s
[ 4.829559] raid6: avx2x1 gen() 15179 MB/s
[ 4.897557] raid6: avx2x1 xor() 11156 MB/s
[ 4.965556] raid6: avx2x2 gen() 17567 MB/s
[ 5.033556] raid6: avx2x2 xor() 11463 MB/s
[ 5.101557] raid6: avx2x4 gen() 20295 MB/s
[ 5.169555] raid6: avx2x4 xor() 14067 MB/s
[ 5.170318] raid6: using algorithm avx2x4 gen() 20295 MB/s
[ 5.171078] raid6: .... xor() 14067 MB/s, rmw enabled
[ 5.171826] raid6: using avx2x2 recovery algorithm
[ 5.193175] xor: automatically using best checksumming function avx
[ 5.196924] async_tx: api initialized (async)
[ 5.316893] Btrfs loaded, crc32c=crc32c-intel
[ 5.633798] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.733783] random: crng init done
[ 6.688056] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.721236] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 6.722743] systemd[1]: Detected virtualization xen.
[ 6.723424] systemd[1]: Detected architecture x86-64.
[ 6.768242] systemd[1]: Set hostname to <lis-f2334>.
[ 7.634446] systemd[1]: Listening on udev Control Socket.
[ 7.659509] systemd[1]: Listening on Journal Socket (/dev/log).
[ 7.685358] systemd[1]: Created slice User and Session Slice.
[ 7.710645] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 7.735834] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.761578] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.412175] lp: driver loaded but no devices found
[ 8.526756] ppdev: user-space parallel port driver
[ 8.538876] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[ 8.539612] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[ 8.540329] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[ 8.556267] Loading iSCSI transport class v2.0-870.
[ 8.580780] iscsi: registered transport (tcp)
[ 8.910187] iscsi: registered transport (iser)
[ 9.747061] EXT4-fs (sdb4): re-mounted. Opts: errors=remount-ro
[ 9.867394] systemd-journald[907]: Received request to flush runtime journal from PID 1
[ 9.963088] Adding 2097148k swap on /swapfile. Priority:-1 extents:6 across:2260988k FS
[ 10.474826] mei_me 0000:00:16.0: Device doesn't have valid ME Interface
[ 10.567777] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.877852] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 10.877853] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 10.877854] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 10.877854] RAPL PMU: hw unit of domain dram 2^-16 Joules
[ 11.299965] EDAC sbridge: Seeking for: PCI ID 8086:6fa0
[ 11.299972] EDAC sbridge: Ver: 1.1.1
[ 11.317154] intel_rapl: Found RAPL domain package
[ 11.317162] intel_rapl: Found RAPL domain dram
[ 11.317163] intel_rapl: DRAM domain energy unit 15300pj
[ 11.317165] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 11.346637] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 12.858421] audit: type=1400 audit(1506481323.029:2): apparmor="STATUS" operation="profile_load" name="lxc-container-default" pid=1415 comm="apparmor_parser"
[ 12.858423] audit: type=1400 audit(1506481323.029:3): apparmor="STATUS" operation="profile_load" name="lxc-container-default-cgns" pid=1415 comm="apparmor_parser"
[ 12.858425] audit: type=1400 audit(1506481323.029:4): apparmor="STATUS" operation="profile_load" name="lxc-container-default-with-mounting" pid=1415 comm="apparmor_parser"
[ 12.858426] audit: type=1400 audit(1506481323.029:5): apparmor="STATUS" operation="profile_load" name="lxc-container-default-with-nesting" pid=1415 comm="apparmor_parser"
[ 12.890538] audit: type=1400 audit(1506481323.061:6): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1417 comm="apparmor_parser"
[ 12.890539] audit: type=1400 audit(1506481323.061:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1417 comm="apparmor_parser"
[ 12.890540] audit: type=1400 audit(1506481323.061:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1417 comm="apparmor_parser"
[ 12.890541] audit: type=1400 audit(1506481323.061:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1417 comm="apparmor_parser"
[ 12.968913] audit: type=1400 audit(1506481323.140:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1418 comm="apparmor_parser"
[ 12.968915] audit: type=1400 audit(1506481323.140:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1418 comm="apparmor_parser"
[ 14.281663] new mount options do not match the existing superblock, will be ignored
[ 15.193612] IPv6: ADDRCONF(NETDEV_UP): eno3: link is not ready
[ 17.708819] systemd[1]: motd-news.timer: Adding 56min 7.366645s random time.
[ 17.708938] systemd[1]: apt-daily.timer: Adding 7h 34min 6.637534s random time.
[ 18.285980] igb 0000:07:00.0 eno3: igb: eno3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 18.286144] IPv6: ADDRCONF(NETDEV_CHANGE): eno3: link becomes ready
[ 19.335292] systemd[1]: motd-news.timer: Adding 55min 38.033235s random time.
[ 19.335408] systemd[1]: apt-daily.timer: Adding 5h 45min 51.597290s random time.
[ 19.589717] systemd[1]: motd-news.timer: Adding 13min 54.332002s random time.
[ 19.589823] systemd[1]: apt-daily.timer: Adding 4h 22min 56.419201s random time.
[ 19.775219] systemd[1]: motd-news.timer: Adding 13min 47.174709s random time.
[ 19.775325] systemd[1]: apt-daily.timer: Adding 10h 45min 3.340338s random time.
[ 21.072897] xen:xen_evtchn: Event-channel device installed
[ 21.204752] xen:manage: Unable to read sysrq code in control/sysrq
[ 26.089838] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 26.283073] Ebtables v2.0 registered
[ 28.907606] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 28.915231] virbr0: port 1(virbr0-nic) entered blocking state
[ 28.915233] virbr0: port 1(virbr0-nic) entered disabled state
[ 28.915271] device virbr0-nic entered promiscuous mode
[ 29.579356] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 30.108852] virbr0: port 1(virbr0-nic) entered blocking state
[ 30.108854] virbr0: port 1(virbr0-nic) entered listening state
[ 30.339365] virbr0: port 1(virbr0-nic) entered disabled state
[84522.249388] DCCP: Activated CCID 2 (TCP-like)
[84522.293764] sctp: Hash tables configured (bind 2048/2048)
[-- Attachment #3: lscpu.log --]
[-- Type: application/octet-stream, Size: 1145 bytes --]
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 1
On-line CPU(s) list: 0
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 79
Model name: Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz
Stepping: 1
CPU MHz: 1999.872
BogoMIPS: 4000.08
Hypervisor vendor: Xen
Virtualization type: none
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 35840K
NUMA node0 CPU(s): 0
Flags: fpu de tsc msr pae mce cx8 apic sep mca cmov pat clflush acpi mmx fxsr sse sse2 ht syscall nx lm constant_tsc arch_perfmon rep_good nopl nonstop_tsc cpuid pni pclmulqdq monitor est ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm abm 3dnowprefetch epb cat_l3 cdp_l3 fsgsbase bmi1 hle avx2 bmi2 erms rtm rdseed adx xsaveopt cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts
[-- Attachment #4: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 5:12 Only 1 CPU was detected Hongjiang Zhang
@ 2017-09-28 6:12 ` Juergen Gross
2017-09-28 7:22 ` Hongjiang Zhang
0 siblings, 1 reply; 16+ messages in thread
From: Juergen Gross @ 2017-09-28 6:12 UTC (permalink / raw)
To: Hongjiang Zhang, xen-devel
On 28/09/17 07:12, Hongjiang Zhang wrote:
> Hi all,
>
>
>
> I install Xen 4.8 on Ubuntu 17.04 (kernel is updated to 4.12). But I
> found only 1 CPU was detected.
>
>
>
> I thought it is caused by some BIOS settings, so I enabled x2APIC in
> BIOS, unfortunately, Linux hangs during booting after printing “Loading
> initial ramdisk …”.
>
>
>
> I have to disable x2APIC finally, but I only have 1 CPU when system is
> up. Does anyone encounter this issue?
Please post the output of "xl dmesg". This will show the hypervisor
messages.
Juergen
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 6:12 ` Juergen Gross
@ 2017-09-28 7:22 ` Hongjiang Zhang
2017-09-28 7:42 ` Juergen Gross
2017-09-28 8:38 ` Jan Beulich
0 siblings, 2 replies; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 7:22 UTC (permalink / raw)
To: Juergen Gross, xen-devel
[-- Attachment #1: Type: text/plain, Size: 870 bytes --]
See the attachment.
>-----Original Message-----
>From: Juergen Gross [mailto:jgross@suse.com]
>Sent: Thursday, September 28, 2017 2:13 PM
>To: Hongjiang Zhang <honzhan@microsoft.com>; xen-
>devel@lists.xenproject.org
>Subject: Re: [Xen-devel] Only 1 CPU was detected
>
>On 28/09/17 07:12, Hongjiang Zhang wrote:
>> Hi all,
>>
>>
>>
>> I install Xen 4.8 on Ubuntu 17.04 (kernel is updated to 4.12). But I
>> found only 1 CPU was detected.
>>
>>
>>
>> I thought it is caused by some BIOS settings, so I enabled x2APIC in
>> BIOS, unfortunately, Linux hangs during booting after printing
>> "Loading initial ramdisk ...".
>>
>>
>>
>> I have to disable x2APIC finally, but I only have 1 CPU when system is
>> up. Does anyone encounter this issue?
>
>Please post the output of "xl dmesg". This will show the hypervisor messages.
>
>
>Juergen
[-- Attachment #2: xl_dmesg.log --]
[-- Type: application/octet-stream, Size: 4567 bytes --]
(XEN) Xen version 4.8.0 (Ubuntu 4.8.0-1ubuntu2.2) (stefan.bader@canonical.com) (gcc (Ubuntu 6.3.0-12ubuntu2) 6.3.0 20170406) debug=n Tue Jul 18 11:50:29 UTC 2017
(XEN) Bootloader: GRUB 2.02~beta3-4ubuntu2.2
(XEN) Command line: placeholder no-real-mode edd=off
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Multiboot-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 000000007a089000 (usable)
(XEN) 000000007a089000 - 000000007a189000 (reserved)
(XEN) 000000007a189000 - 000000007a289000 type 20
(XEN) 000000007a289000 - 000000007af0b000 (reserved)
(XEN) 000000007af0b000 - 000000007b93b000 (ACPI NVS)
(XEN) 000000007b93b000 - 000000007bab5000 (ACPI data)
(XEN) 000000007bab5000 - 000000007bae9000 (usable)
(XEN) 000000007bae9000 - 000000007baff000 (ACPI data)
(XEN) 000000007baff000 - 000000007bb00000 (usable)
(XEN) 0000000080000000 - 0000000090000000 (reserved)
(XEN) 00000000feda8000 - 00000000fedac000 (reserved)
(XEN) 00000000ff310000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000001880000000 (usable)
(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
(XEN) System RAM: 98208MB (100565368kB)
(XEN) Domain heap initialised
(XEN) Found and enabled local APIC!
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 1.193MHz PIT
(XEN) Detected 2000.040 MHz processor.
(XEN) Initing memory sharing.
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - APIC Register Virtualization
(XEN) - Virtual Interrupt Delivery
(XEN) - Posted Interrupt Processing
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 1 CPUs
(XEN) Dom0 has maximum 208 PIRQs
(XEN) ACPI is disabled, notifying Domain 0 (acpi=off)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2540000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000001034000000->0000001038000000 (24809727 pages to be allocated)
(XEN) Init. ramdisk: 000000187d3c6000->000000187ffff722
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff82540000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->000000800bd7e9c8
(XEN) Start info: ffffffff82540000->ffffffff825404b4
(XEN) Page tables: ffffffff82541000->ffffffff82558000
(XEN) Boot stack: ffffffff82558000->ffffffff82559000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff8209d180
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs
(XEN) ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 312kB init memory
(XEN) Platform timer appears to have unexpectedly wrapped 1 times.
[-- Attachment #3: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 7:22 ` Hongjiang Zhang
@ 2017-09-28 7:42 ` Juergen Gross
2017-09-28 14:45 ` Hongjiang Zhang
2017-09-28 8:38 ` Jan Beulich
1 sibling, 1 reply; 16+ messages in thread
From: Juergen Gross @ 2017-09-28 7:42 UTC (permalink / raw)
To: Hongjiang Zhang, xen-devel
On 28/09/17 09:22, Hongjiang Zhang wrote:
> See the attachment.
>
>> -----Original Message-----
>> From: Juergen Gross [mailto:jgross@suse.com]
>> Sent: Thursday, September 28, 2017 2:13 PM
>> To: Hongjiang Zhang <honzhan@microsoft.com>; xen-
>> devel@lists.xenproject.org
>> Subject: Re: [Xen-devel] Only 1 CPU was detected
>>
>> On 28/09/17 07:12, Hongjiang Zhang wrote:
>>> Hi all,
>>>
>>>
>>>
>>> I install Xen 4.8 on Ubuntu 17.04 (kernel is updated to 4.12). But I
>>> found only 1 CPU was detected.
>>>
>>>
>>>
>>> I thought it is caused by some BIOS settings, so I enabled x2APIC in
>>> BIOS, unfortunately, Linux hangs during booting after printing
>>> "Loading initial ramdisk ...".
>>>
>>>
>>>
>>> I have to disable x2APIC finally, but I only have 1 CPU when system is
>>> up. Does anyone encounter this issue?
>>
>> Please post the output of "xl dmesg". This will show the hypervisor messages.
> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
Uuh, that is rather bad, I guess.
Just to be sure: can you please add "loglvl=all" to the xen boot
parameters? This would need to be added in your grub config file just
where "no-real-mode edd=off" is specified today (parameters for xen.gz).
Then repost the "xl dmesg" output, please.
Setting up a serial console would help, too, as you could then capture
the output with enabled x2APIC, which might help to find the reason why
Linux boot is hanging with this option.
Additionally you should check whether you can update the BIOS of the
test machine to a more recent version. It seems to be broken.
Juergen
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 7:22 ` Hongjiang Zhang
2017-09-28 7:42 ` Juergen Gross
@ 2017-09-28 8:38 ` Jan Beulich
2017-09-28 9:32 ` Hongjiang Zhang
1 sibling, 1 reply; 16+ messages in thread
From: Jan Beulich @ 2017-09-28 8:38 UTC (permalink / raw)
To: Hongjiang Zhang; +Cc: Juergen Gross, xen-devel
>>> On 28.09.17 at 09:22, <honzhan@microsoft.com> wrote:
> See the attachment.
With
(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
I wonder if you're trying to use xen.gz on an EFI system. Is so,
you want to use xen.efi there instead if firmware doesn't set
up enough compatibility things in EFI Mode, or enable CSM if an
option like this is provided by firmware setup.
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 8:38 ` Jan Beulich
@ 2017-09-28 9:32 ` Hongjiang Zhang
2017-09-28 9:39 ` Jan Beulich
0 siblings, 1 reply; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 9:32 UTC (permalink / raw)
To: Jan Beulich; +Cc: Juergen Gross, xen-devel
>-----Original Message-----
>From: Jan Beulich [mailto:JBeulich@suse.com]
>Sent: Thursday, September 28, 2017 4:38 PM
>To: Hongjiang Zhang <honzhan@microsoft.com>
>Cc: xen-devel@lists.xenproject.org; Juergen Gross <jgross@suse.com>
>Subject: Re: [Xen-devel] Only 1 CPU was detected
>
>>>> On 28.09.17 at 09:22, <honzhan@microsoft.com> wrote:
>> See the attachment.
>
>With
>
>(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
>
>I wonder if you're trying to use xen.gz on an EFI system. Is so, you want to use
>xen.efi there instead if firmware doesn't set up enough compatibility things in
>EFI Mode, or enable CSM if an option like this is provided by firmware setup.
>
I cannot use xen.efi. It reports "error: invalid arch-dependent ELF magic"
>Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 9:32 ` Hongjiang Zhang
@ 2017-09-28 9:39 ` Jan Beulich
2017-09-28 14:36 ` Hongjiang Zhang
0 siblings, 1 reply; 16+ messages in thread
From: Jan Beulich @ 2017-09-28 9:39 UTC (permalink / raw)
To: Hongjiang Zhang; +Cc: Juergen Gross, xen-devel
>>> On 28.09.17 at 11:32, <honzhan@microsoft.com> wrote:
>> -----Original Message-----
>>From: Jan Beulich [mailto:JBeulich@suse.com]
>>Sent: Thursday, September 28, 2017 4:38 PM
>>To: Hongjiang Zhang <honzhan@microsoft.com>
>>Cc: xen-devel@lists.xenproject.org; Juergen Gross <jgross@suse.com>
>>Subject: Re: [Xen-devel] Only 1 CPU was detected
>>
>>>>> On 28.09.17 at 09:22, <honzhan@microsoft.com> wrote:
>>> See the attachment.
>>
>>With
>>
>>(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
>>
>>I wonder if you're trying to use xen.gz on an EFI system. Is so, you want to
> use
>>xen.efi there instead if firmware doesn't set up enough compatibility things
> in
>>EFI Mode, or enable CSM if an option like this is provided by firmware setup.
>>
> I cannot use xen.efi. It reports "error: invalid arch-dependent ELF magic"
Are you using a 32-bit EFI by chance?
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 9:39 ` Jan Beulich
@ 2017-09-28 14:36 ` Hongjiang Zhang
2017-09-28 15:07 ` Jan Beulich
0 siblings, 1 reply; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 14:36 UTC (permalink / raw)
To: Jan Beulich; +Cc: Juergen Gross, xen-devel
>-----Original Message-----
>From: Jan Beulich [mailto:JBeulich@suse.com]
>Sent: Thursday, September 28, 2017 5:39 PM
>To: Hongjiang Zhang <honzhan@microsoft.com>
>Cc: xen-devel@lists.xenproject.org; Juergen Gross <jgross@suse.com>
>Subject: RE: [Xen-devel] Only 1 CPU was detected
>
>>>> On 28.09.17 at 11:32, <honzhan@microsoft.com> wrote:
>>> -----Original Message-----
>>>From: Jan Beulich [mailto:JBeulich@suse.com]
>>>Sent: Thursday, September 28, 2017 4:38 PM
>>>To: Hongjiang Zhang <honzhan@microsoft.com>
>>>Cc: xen-devel@lists.xenproject.org; Juergen Gross <jgross@suse.com>
>>>Subject: Re: [Xen-devel] Only 1 CPU was detected
>>>
>>>>>> On 28.09.17 at 09:22, <honzhan@microsoft.com> wrote:
>>>> See the attachment.
>>>
>>>With
>>>
>>>(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
>>>
>>>I wonder if you're trying to use xen.gz on an EFI system. Is so, you want to
>> use
>>>xen.efi there instead if firmware doesn't set up enough compatibility things
>> in
>>>EFI Mode, or enable CSM if an option like this is provided by firmware setup.
>>>
>> I cannot use xen.efi. It reports "error: invalid arch-dependent ELF magic"
>
>Are you using a 32-bit EFI by chance?
>
I don't think so. I used "file xen.efi" to check and it indicates it is x86_64:
root@lis-f2334:~# file /boot/xen-4.8-amd64.efi
/boot/xen-4.8-amd64.efi: PE32+ executable (EFI application) x86-64 (stripped to external PDB), for MS Windows
Shall I build xen by myself?
>Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 7:42 ` Juergen Gross
@ 2017-09-28 14:45 ` Hongjiang Zhang
2017-09-28 20:03 ` GRUB2 missing multiboot2 patches?Re: " Konrad Rzeszutek Wilk
0 siblings, 1 reply; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 14:45 UTC (permalink / raw)
To: Juergen Gross, xen-devel
[-- Attachment #1: Type: text/plain, Size: 1063 bytes --]
>> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
>> [20070126]
>
>Uuh, that is rather bad, I guess.
>
>Just to be sure: can you please add "loglvl=all" to the xen boot parameters?
>This would need to be added in your grub config file just where "no-real-
>mode edd=off" is specified today (parameters for xen.gz).
>Then repost the "xl dmesg" output, please.
>
>Setting up a serial console would help, too, as you could then capture the
>output with enabled x2APIC, which might help to find the reason why Linux
>boot is hanging with this option.
>
>Additionally you should check whether you can update the BIOS of the test
>machine to a more recent version. It seems to be broken.
>
The dmesg with "loglvl=all" enable is attached.
I have updated BIOS to the latest one when I first encountered this issue.
But it does not help. The issue is still there.
Setting up a serial console is helpful for diagnosing x2APIC hang issue.
But the test machine is a remote machine, I cannot access its physical COM port.
>
>Juergen
[-- Attachment #2: xl_dmesg_logall.txt --]
[-- Type: text/plain, Size: 6357 bytes --]
(XEN) Xen version 4.8.0 (Ubuntu 4.8.0-1ubuntu2.2) (stefan.bader@canonical.com) (gcc (Ubuntu 6.3.0-12ubuntu2) 6.3.0 20170406) debug=n Tue Jul 18 11:50:29 UTC 2017
(XEN) Bootloader: GRUB 2.02~beta3-4ubuntu2.2
(XEN) Command line: placeholder no-real-mode edd=off loglvl=all
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) Disc information:
(XEN) Found 0 MBR signatures
(XEN) Found 0 EDD information structures
(XEN) Multiboot-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 000000007a089000 (usable)
(XEN) 000000007a089000 - 000000007a189000 (reserved)
(XEN) 000000007a189000 - 000000007a289000 type 20
(XEN) 000000007a289000 - 000000007af0b000 (reserved)
(XEN) 000000007af0b000 - 000000007b93b000 (ACPI NVS)
(XEN) 000000007b93b000 - 000000007bab5000 (ACPI data)
(XEN) 000000007bab5000 - 000000007bae9000 (usable)
(XEN) 000000007bae9000 - 000000007baff000 (ACPI data)
(XEN) 000000007baff000 - 000000007bb00000 (usable)
(XEN) 0000000080000000 - 0000000090000000 (reserved)
(XEN) 00000000feda8000 - 00000000fedac000 (reserved)
(XEN) 00000000ff310000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000001880000000 (usable)
(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
(XEN) System RAM: 98208MB (100565368kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000001880000000
(XEN) Domain heap initialised
(XEN) CPU Vendor: Intel, Family 6 (0x6), Model 79 (0x4f), Stepping 1 (raw 000406f1)
(XEN) DMI 2.8 present.
(XEN) Using APIC driver default
(XEN) SMP: Allowing 1 CPUs (1 hotplug CPUs)
(XEN) Found and enabled local APIC!
(XEN) IRQ limits: 16 GSI, 192 MSI/MSI-X
(XEN) Not enabling x2APIC: depends on iommu_supports_eim.
(XEN) xstate: size: 0x340 and states: 0x7
(XEN) Intel machine check reporting enabled
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Platform timer is 1.193MHz PIT
(XEN) Detected 2000.061 MHz processor.
(XEN) Initing memory sharing.
(XEN) alt table ffff82d0802baf38 -> ffff82d0802bc594
(XEN) I/O virtualisation disabled
(XEN) nr_sockets: 37
(XEN) SMP motherboard not detected.
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) TSC deadline timer enabled
(XEN) Allocated console ring of 16 KiB.
(XEN) mwait-idle: MWAIT substates: 0x2120
(XEN) mwait-idle: v0.4.1 model 0x4f
(XEN) mwait-idle: lapic_timer_reliable_states 0xffffffff
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) - Unrestricted Guest
(XEN) - APIC Register Virtualization
(XEN) - Virtual Interrupt Delivery
(XEN) - Posted Interrupt Processing
(XEN) - VMCS shadowing
(XEN) - VM Functions
(XEN) - Virtualisation Exceptions
(XEN) - Page Modification Logging
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) Brought up 1 CPUs
(XEN) build-id: 20a1f8c687393ace7bcea26576429d96a2ddf70b
(XEN) ACPI sleep modes: S3
(XEN) VPMU: disabled
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 208 PIRQs
(XEN) ACPI is disabled, notifying Domain 0 (acpi=off)
(XEN) NX (Execute Disable) protection active
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2540000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000001034000000->0000001038000000 (24809727 pages to be allocated)
(XEN) Init. ramdisk: 000000187d3c6000->000000187ffff722
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff82540000
(XEN) Init. ramdisk: 0000000000000000->0000000000000000
(XEN) Phys-Mach map: 0000008000000000->000000800bd7e9c8
(XEN) Start info: ffffffff82540000->ffffffff825404b4
(XEN) Page tables: ffffffff82541000->ffffffff82558000
(XEN) Boot stack: ffffffff82558000->ffffffff82559000
(XEN) TOTAL: ffffffff80000000->ffffffff82800000
(XEN) ENTRY ADDRESS: ffffffff8209d180
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM on 1 nodes using 1 CPUs
(XEN) ................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................done.
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 312kB init memory
(XEN) PCI add device 0000:00:00.0
(XEN) PCI add device 0000:00:01.0
(XEN) PCI add device 0000:00:02.0
(XEN) PCI add device 0000:00:03.0
(XEN) PCI add device 0000:00:03.2
(XEN) PCI add device 0000:00:05.0
(XEN) PCI add device 0000:00:05.1
(XEN) PCI add device 0000:00:05.2
(XEN) PCI add device 0000:00:05.4
(XEN) PCI add device 0000:00:11.0
(XEN) PCI add device 0000:00:11.4
(XEN) PCI add device 0000:00:14.0
(XEN) PCI add device 0000:00:16.0
(XEN) PCI add device 0000:00:16.1
(XEN) PCI add device 0000:00:1a.0
(XEN) PCI add device 0000:00:1c.0
(XEN) PCI add device 0000:00:1c.4
(XEN) PCI add device 0000:00:1c.7
(XEN) PCI add device 0000:00:1d.0
(XEN) PCI add device 0000:00:1f.0
(XEN) PCI add device 0000:00:1f.2
(XEN) PCI add device 0000:03:00.0
(XEN) PCI add device 0000:01:00.0
(XEN) PCI add device 0000:01:00.1
(XEN) PCI add device 0000:07:00.0
(XEN) PCI add device 0000:07:00.1
(XEN) PCI add device 0000:08:00.0
(XEN) PCI add device 0000:09:00.0
(XEN) PCI add device 0000:0a:00.0
(XEN) PCI add device 0000:0b:00.0
[-- Attachment #3: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Only 1 CPU was detected
2017-09-28 14:36 ` Hongjiang Zhang
@ 2017-09-28 15:07 ` Jan Beulich
0 siblings, 0 replies; 16+ messages in thread
From: Jan Beulich @ 2017-09-28 15:07 UTC (permalink / raw)
To: Hongjiang Zhang; +Cc: Juergen Gross, xen-devel
>>> On 28.09.17 at 16:36, <honzhan@microsoft.com> wrote:
>> -----Original Message-----
>>From: Jan Beulich [mailto:JBeulich@suse.com]
>>Sent: Thursday, September 28, 2017 5:39 PM
>>To: Hongjiang Zhang <honzhan@microsoft.com>
>>Cc: xen-devel@lists.xenproject.org; Juergen Gross <jgross@suse.com>
>>Subject: RE: [Xen-devel] Only 1 CPU was detected
>>
>>>>> On 28.09.17 at 11:32, <honzhan@microsoft.com> wrote:
>>>> -----Original Message-----
>>>>From: Jan Beulich [mailto:JBeulich@suse.com]
>>>>Sent: Thursday, September 28, 2017 4:38 PM
>>>>To: Hongjiang Zhang <honzhan@microsoft.com>
>>>>Cc: xen-devel@lists.xenproject.org; Juergen Gross <jgross@suse.com>
>>>>Subject: Re: [Xen-devel] Only 1 CPU was detected
>>>>
>>>>>>> On 28.09.17 at 09:22, <honzhan@microsoft.com> wrote:
>>>>> See the attachment.
>>>>
>>>>With
>>>>
>>>>(XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found [20070126]
>>>>
>>>>I wonder if you're trying to use xen.gz on an EFI system. Is so, you want to
>>> use
>>>>xen.efi there instead if firmware doesn't set up enough compatibility things
>>> in
>>>>EFI Mode, or enable CSM if an option like this is provided by firmware setup.
>>>>
>>> I cannot use xen.efi. It reports "error: invalid arch-dependent ELF magic"
>>
>>Are you using a 32-bit EFI by chance?
>>
> I don't think so. I used "file xen.efi" to check and it indicates it is
> x86_64:
> root@lis-f2334:~# file /boot/xen-4.8-amd64.efi
> /boot/xen-4.8-amd64.efi: PE32+ executable (EFI application) x86-64 (stripped to
> external PDB), for MS Windows
The question was about your firmware, not xen.efi. The latter can
only be built as a 64-bit binary right now. Hence ...
> Shall I build xen by myself?
... no, unless you would first invest quite a bit of work into getting
Xen to also build as a 32-bit EFI binary (and this of course would
help only if indeed your EFI implementation is a 32-bit one).
Jan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* GRUB2 missing multiboot2 patches?Re: Only 1 CPU was detected
2017-09-28 14:45 ` Hongjiang Zhang
@ 2017-09-28 20:03 ` Konrad Rzeszutek Wilk
2017-09-28 20:48 ` Stefan Bader
2017-09-28 23:06 ` Hongjiang Zhang
0 siblings, 2 replies; 16+ messages in thread
From: Konrad Rzeszutek Wilk @ 2017-09-28 20:03 UTC (permalink / raw)
To: Hongjiang Zhang, stefan.bader; +Cc: Juergen Gross, xen-devel
On Thu, Sep 28, 2017 at 02:45:38PM +0000, Hongjiang Zhang wrote:
> >> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
> >> [20070126]
> >
> >Uuh, that is rather bad, I guess.
I am going to assume this is due to not having:
b4d709b6e Use grub-file to figure out whether multiboot2 should be used for Xen.gz
a8e0f1adf Fix util/grub.d/20_linux_xen.in: Add xen_boot command support for aarch64
In the grub that he is using (Ubuntu?)
In other words he is using 'multiboot' instead of 'multiboot2'
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: GRUB2 missing multiboot2 patches?Re: Only 1 CPU was detected
2017-09-28 20:03 ` GRUB2 missing multiboot2 patches?Re: " Konrad Rzeszutek Wilk
@ 2017-09-28 20:48 ` Stefan Bader
2017-09-28 23:08 ` Hongjiang Zhang
2017-09-28 23:06 ` Hongjiang Zhang
1 sibling, 1 reply; 16+ messages in thread
From: Stefan Bader @ 2017-09-28 20:48 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, Hongjiang Zhang; +Cc: Juergen Gross, xen-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 885 bytes --]
On 28.09.2017 16:03, Konrad Rzeszutek Wilk wrote:
> On Thu, Sep 28, 2017 at 02:45:38PM +0000, Hongjiang Zhang wrote:
>>>> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
>>>> [20070126]
>>>
>>> Uuh, that is rather bad, I guess.
>
> I am going to assume this is due to not having:
>
> b4d709b6e Use grub-file to figure out whether multiboot2 should be used for Xen.gz
> a8e0f1adf Fix util/grub.d/20_linux_xen.in: Add xen_boot command support for aarch64
>
> In the grub that he is using (Ubuntu?)
>
> In other words he is using 'multiboot' instead of 'multiboot2'
>
If this is Ubuntu, my expectation is that this would require Xen 4.9 (which is
part of 17.10 but not yet released) and work on grub2 (which I will very
unlikely have the time for). Debian has not yet moved to Xen 4.9, so I would
doubt that it would work there either.
-Stefan
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
[-- Attachment #2: Type: text/plain, Size: 127 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: GRUB2 missing multiboot2 patches?Re: Only 1 CPU was detected
2017-09-28 20:03 ` GRUB2 missing multiboot2 patches?Re: " Konrad Rzeszutek Wilk
2017-09-28 20:48 ` Stefan Bader
@ 2017-09-28 23:06 ` Hongjiang Zhang
1 sibling, 0 replies; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 23:06 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk, stefan.bader; +Cc: Juergen Gross, xen-devel
>-----Original Message-----
>From: Konrad Rzeszutek Wilk [mailto:konrad.wilk@oracle.com]
>Sent: Friday, September 29, 2017 4:03 AM
>To: Hongjiang Zhang <honzhan@microsoft.com>;
>stefan.bader@canonical.com
>Cc: Juergen Gross <jgross@suse.com>; xen-devel@lists.xenproject.org
>Subject: GRUB2 missing multiboot2 patches?Re: [Xen-devel] Only 1 CPU was
>detected
>
>On Thu, Sep 28, 2017 at 02:45:38PM +0000, Hongjiang Zhang wrote:
>> >> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
>> >> [20070126]
>> >
>> >Uuh, that is rather bad, I guess.
>
>I am going to assume this is due to not having:
>
>b4d709b6e Use grub-file to figure out whether multiboot2 should be used for
>Xen.gz a8e0f1adf Fix util/grub.d/20_linux_xen.in: Add xen_boot command
>support for aarch64
>
>In the grub that he is using (Ubuntu?)
>
Yes, I use Ubuntu 17.04
>In other words he is using 'multiboot' instead of 'multiboot2'
Yes. But does Xen 4.8 amd64 support "multiboot2"?
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: GRUB2 missing multiboot2 patches?Re: Only 1 CPU was detected
2017-09-28 20:48 ` Stefan Bader
@ 2017-09-28 23:08 ` Hongjiang Zhang
2017-09-29 10:49 ` Michael Young
0 siblings, 1 reply; 16+ messages in thread
From: Hongjiang Zhang @ 2017-09-28 23:08 UTC (permalink / raw)
To: Stefan Bader, Konrad Rzeszutek Wilk; +Cc: Juergen Gross, xen-devel
>-----Original Message-----
>From: Stefan Bader [mailto:stefan.bader@canonical.com]
>Sent: Friday, September 29, 2017 4:49 AM
>To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>; Hongjiang Zhang
><honzhan@microsoft.com>
>Cc: Juergen Gross <jgross@suse.com>; xen-devel@lists.xenproject.org
>Subject: Re: GRUB2 missing multiboot2 patches?Re: [Xen-devel] Only 1 CPU
>was detected
>
>On 28.09.2017 16:03, Konrad Rzeszutek Wilk wrote:
>> On Thu, Sep 28, 2017 at 02:45:38PM +0000, Hongjiang Zhang wrote:
>>>>> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
>>>>> [20070126]
>>>>
>>>> Uuh, that is rather bad, I guess.
>>
>> I am going to assume this is due to not having:
>>
>> b4d709b6e Use grub-file to figure out whether multiboot2 should be
>> used for Xen.gz a8e0f1adf Fix util/grub.d/20_linux_xen.in: Add
>> xen_boot command support for aarch64
>>
>> In the grub that he is using (Ubuntu?)
>>
>> In other words he is using 'multiboot' instead of 'multiboot2'
>>
>If this is Ubuntu, my expectation is that this would require Xen 4.9 (which is
>part of 17.10 but not yet released) and work on grub2 (which I will very
>unlikely have the time for). Debian has not yet moved to Xen 4.9, so I would
>doubt that it would work there either.
>
If Xen 4.9 does not work either, shall I try CentOS 7.13 instead? Or which Linux distribution is recommended?
>-Stefan
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: GRUB2 missing multiboot2 patches?Re: Only 1 CPU was detected
2017-09-28 23:08 ` Hongjiang Zhang
@ 2017-09-29 10:49 ` Michael Young
2017-09-29 13:54 ` Konrad Rzeszutek Wilk
0 siblings, 1 reply; 16+ messages in thread
From: Michael Young @ 2017-09-29 10:49 UTC (permalink / raw)
To: Hongjiang Zhang; +Cc: Juergen Gross, xen-devel, Stefan Bader
On Thu, 28 Sep 2017, Hongjiang Zhang wrote:
>> -----Original Message-----
>> From: Stefan Bader [mailto:stefan.bader@canonical.com]
>> Sent: Friday, September 29, 2017 4:49 AM
>> To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>; Hongjiang Zhang
>> <honzhan@microsoft.com>
>> Cc: Juergen Gross <jgross@suse.com>; xen-devel@lists.xenproject.org
>> Subject: Re: GRUB2 missing multiboot2 patches?Re: [Xen-devel] Only 1 CPU
>> was detected
>>
>> On 28.09.2017 16:03, Konrad Rzeszutek Wilk wrote:
>>> On Thu, Sep 28, 2017 at 02:45:38PM +0000, Hongjiang Zhang wrote:
>>>>>> (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
>>>>>> [20070126]
>>>>>
>>>>> Uuh, that is rather bad, I guess.
>>>
>>> I am going to assume this is due to not having:
>>>
>>> b4d709b6e Use grub-file to figure out whether multiboot2 should be
>>> used for Xen.gz a8e0f1adf Fix util/grub.d/20_linux_xen.in: Add
>>> xen_boot command support for aarch64
>>>
>>> In the grub that he is using (Ubuntu?)
>>>
>>> In other words he is using 'multiboot' instead of 'multiboot2'
>>>
>> If this is Ubuntu, my expectation is that this would require Xen 4.9 (which is
>> part of 17.10 but not yet released) and work on grub2 (which I will very
>> unlikely have the time for). Debian has not yet moved to Xen 4.9, so I would
>> doubt that it would work there either.
>>
> If Xen 4.9 does not work either, shall I try CentOS 7.13 instead? Or which Linux distribution is recommended?
I think Fedora 27 (currently in beta) is almost there (for x86_64 anyway).
It does have xen 4.9, but some manual steps are needed to get grub2
working using multiboot2. These are
* edit the grub.cfg file to use multiboot2 and module2 rather than
multiboot and module
* install the grub2-efi-x64-modules package and copy multiboot2.mod and
relocator.mod from /usr/lib/grub/x86_64-efi to
/boot/efi/EFI/fedora/x86_64-efi/ (which you probably need to create)
* add insmod multiboot2 to the relevant section in the grub.cfg file with
the other insmod lines.
Also watch out for useless sections in the grub.cfg file for a xen config
file rather than for xen itself.
I recently got xen working doing the above including running a domU guest,
but gdm didn't start and I haven't had a chance to work out if that is
related or not.
Michael Young
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: GRUB2 missing multiboot2 patches?Re: Only 1 CPU was detected
2017-09-29 10:49 ` Michael Young
@ 2017-09-29 13:54 ` Konrad Rzeszutek Wilk
0 siblings, 0 replies; 16+ messages in thread
From: Konrad Rzeszutek Wilk @ 2017-09-29 13:54 UTC (permalink / raw)
To: Michael Young; +Cc: Hongjiang Zhang, Juergen Gross, Stefan Bader, xen-devel
On Fri, Sep 29, 2017 at 11:49:39AM +0100, Michael Young wrote:
>
>
> On Thu, 28 Sep 2017, Hongjiang Zhang wrote:
>
> > > -----Original Message-----
> > > From: Stefan Bader [mailto:stefan.bader@canonical.com]
> > > Sent: Friday, September 29, 2017 4:49 AM
> > > To: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>; Hongjiang Zhang
> > > <honzhan@microsoft.com>
> > > Cc: Juergen Gross <jgross@suse.com>; xen-devel@lists.xenproject.org
> > > Subject: Re: GRUB2 missing multiboot2 patches?Re: [Xen-devel] Only 1 CPU
> > > was detected
> > >
> > > On 28.09.2017 16:03, Konrad Rzeszutek Wilk wrote:
> > > > On Thu, Sep 28, 2017 at 02:45:38PM +0000, Hongjiang Zhang wrote:
> > > > > > > (XEN) ACPI Error (tbxfroot-0218): A valid RSDP was not found
> > > > > > > [20070126]
> > > > > >
> > > > > > Uuh, that is rather bad, I guess.
> > > >
> > > > I am going to assume this is due to not having:
> > > >
> > > > b4d709b6e Use grub-file to figure out whether multiboot2 should be
> > > > used for Xen.gz a8e0f1adf Fix util/grub.d/20_linux_xen.in: Add
> > > > xen_boot command support for aarch64
> > > >
> > > > In the grub that he is using (Ubuntu?)
> > > >
> > > > In other words he is using 'multiboot' instead of 'multiboot2'
> > > >
> > > If this is Ubuntu, my expectation is that this would require Xen 4.9 (which is
> > > part of 17.10 but not yet released) and work on grub2 (which I will very
> > > unlikely have the time for). Debian has not yet moved to Xen 4.9, so I would
> > > doubt that it would work there either.
> > >
> > If Xen 4.9 does not work either, shall I try CentOS 7.13 instead? Or which Linux distribution is recommended?
>
> I think Fedora 27 (currently in beta) is almost there (for x86_64 anyway).
> It does have xen 4.9, but some manual steps are needed to get grub2 working
> using multiboot2. These are
>
> * edit the grub.cfg file to use multiboot2 and module2 rather than multiboot
> and module
It won't generate the stanza.
> * install the grub2-efi-x64-modules package and copy multiboot2.mod and
> relocator.mod from /usr/lib/grub/x86_64-efi to
> /boot/efi/EFI/fedora/x86_64-efi/ (which you probably need to create)
> * add insmod multiboot2 to the relevant section in the grub.cfg file with
> the other insmod lines.
>
> Also watch out for useless sections in the grub.cfg file for a xen config
> file rather than for xen itself.
Sadly not there as the ARM changes broke x86, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1486002
>
> I recently got xen working doing the above including running a domU guest,
> but gdm didn't start and I haven't had a chance to work out if that is
> related or not.
>
> Michael Young
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2017-09-29 13:55 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-28 5:12 Only 1 CPU was detected Hongjiang Zhang
2017-09-28 6:12 ` Juergen Gross
2017-09-28 7:22 ` Hongjiang Zhang
2017-09-28 7:42 ` Juergen Gross
2017-09-28 14:45 ` Hongjiang Zhang
2017-09-28 20:03 ` GRUB2 missing multiboot2 patches?Re: " Konrad Rzeszutek Wilk
2017-09-28 20:48 ` Stefan Bader
2017-09-28 23:08 ` Hongjiang Zhang
2017-09-29 10:49 ` Michael Young
2017-09-29 13:54 ` Konrad Rzeszutek Wilk
2017-09-28 23:06 ` Hongjiang Zhang
2017-09-28 8:38 ` Jan Beulich
2017-09-28 9:32 ` Hongjiang Zhang
2017-09-28 9:39 ` Jan Beulich
2017-09-28 14:36 ` Hongjiang Zhang
2017-09-28 15:07 ` Jan Beulich
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.