* [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
@ 2021-02-21 15:25 ` Masahiro Yamada
0 siblings, 0 replies; 8+ messages in thread
From: Masahiro Yamada @ 2021-02-21 15:25 UTC (permalink / raw)
To: Jonathan Corbet, linux-doc
Cc: Masahiro Yamada, Alex Shi, Daniel Vetter, David Airlie,
Federico Vaga, Harry Wei, Jyri Sarha, Tomi Valkeinen, dri-devel,
linux-kernel
You should use KCFLAGS to pass additional compiler flags from the
command line. Using EXTRA_CFLAGS is wrong.
EXTRA_CFLAGS is supposed to specify flags applied only to the current
Makefile (and now deprecated in favor of ccflags-y).
It is still used in arch/mips/kvm/Makefile (and possibly in external
modules too). Passing EXTRA_CFLAGS from the command line overwrites
it and breaks the build.
I also fixed drivers/gpu/drm/tilcdc/Makefile because commit 816175dd1fd7
("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
EXTRA_CFLAGS") was based on the same misunderstanding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Documentation/process/4.Coding.rst | 2 +-
Documentation/process/submit-checklist.rst | 2 +-
Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
drivers/gpu/drm/tilcdc/Makefile | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst
index 0825dc496f22..1f0d81f44e14 100644
--- a/Documentation/process/4.Coding.rst
+++ b/Documentation/process/4.Coding.rst
@@ -242,7 +242,7 @@ and try to avoid "fixes" which make the warning go away without addressing
its cause.
Note that not all compiler warnings are enabled by default. Build the
-kernel with "make EXTRA_CFLAGS=-W" to get the full set.
+kernel with "make KCFLAGS=-W" to get the full set.
The kernel provides several configuration options which turn on debugging
features; most of these are found in the "kernel hacking" submenu. Several
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
index 230ee42f872f..cfc23492b9ea 100644
--- a/Documentation/process/submit-checklist.rst
+++ b/Documentation/process/submit-checklist.rst
@@ -98,7 +98,7 @@ and elsewhere regarding submitting Linux kernel patches.
injection might be appropriate.
21) Newly-added code has been compiled with ``gcc -W`` (use
- ``make EXTRA_CFLAGS=-W``). This will generate lots of noise, but is good
+ ``make KCFLAGS=-W``). This will generate lots of noise, but is good
for finding bugs like "warning: comparison between signed and unsigned".
22) Tested after it has been merged into the -mm patchset to make sure
diff --git a/Documentation/translations/it_IT/process/4.Coding.rst b/Documentation/translations/it_IT/process/4.Coding.rst
index a5e36aa60448..8012fe9497ae 100644
--- a/Documentation/translations/it_IT/process/4.Coding.rst
+++ b/Documentation/translations/it_IT/process/4.Coding.rst
@@ -256,7 +256,7 @@ e cercate di evitare le "riparazioni" che fan sparire l'avvertimento senza
però averne trovato la causa.
Tenete a mente che non tutti gli avvertimenti sono disabilitati di default.
-Costruite il kernel con "make EXTRA_CFLAGS=-W" per ottenerli tutti.
+Costruite il kernel con "make KCFLAGS=-W" per ottenerli tutti.
Il kernel fornisce differenti opzioni che abilitano funzionalità di debugging;
molti di queste sono trovano all'interno del sotto menu "kernel hacking".
diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst
index 3e575502690f..614fc17d9086 100644
--- a/Documentation/translations/it_IT/process/submit-checklist.rst
+++ b/Documentation/translations/it_IT/process/submit-checklist.rst
@@ -104,7 +104,7 @@ sottomissione delle patch, in particolare
l'iniezione di fallimenti specifici per il sottosistema.
22) Il nuovo codice è stato compilato con ``gcc -W`` (usate
- ``make EXTRA_CFLAGS=-W``). Questo genererà molti avvisi, ma è ottimo
+ ``make KCFLAGS=-W``). Questo genererà molti avvisi, ma è ottimo
per scovare bachi come "warning: comparison between signed and unsigned".
23) La patch è stata verificata dopo essere stata inclusa nella serie di patch
diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst
index 959a06ba025c..66cd8ee07606 100644
--- a/Documentation/translations/zh_CN/process/4.Coding.rst
+++ b/Documentation/translations/zh_CN/process/4.Coding.rst
@@ -165,7 +165,7 @@ Linus对这个问题给出了最佳答案:
通常,这些警告都指向真正的问题。提交以供审阅的代码通常不会产生任何编译器警告。
在消除警告时,注意了解真正的原因,并尽量避免“修复”,使警告消失而不解决其原因。
-请注意,并非所有编译器警告都默认启用。使用“make EXTRA_CFLAGS=-W”构建内核以
+请注意,并非所有编译器警告都默认启用。使用“make KCFLAGS=-W”构建内核以
获得完整集合。
内核提供了几个配置选项,可以打开调试功能;大多数配置选项位于“kernel hacking”
diff --git a/drivers/gpu/drm/tilcdc/Makefile b/drivers/gpu/drm/tilcdc/Makefile
index 662bf3a348c9..f5190477de72 100644
--- a/drivers/gpu/drm/tilcdc/Makefile
+++ b/drivers/gpu/drm/tilcdc/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
+ifeq (, $(findstring -W,$(KCFLAGS)))
ccflags-y += -Werror
endif
--
2.27.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
@ 2021-02-21 15:25 ` Masahiro Yamada
0 siblings, 0 replies; 8+ messages in thread
From: Masahiro Yamada @ 2021-02-21 15:25 UTC (permalink / raw)
To: Jonathan Corbet, linux-doc
Cc: David Airlie, Tomi Valkeinen, Masahiro Yamada, linux-kernel,
Jyri Sarha, Harry Wei, dri-devel, Federico Vaga, Alex Shi
You should use KCFLAGS to pass additional compiler flags from the
command line. Using EXTRA_CFLAGS is wrong.
EXTRA_CFLAGS is supposed to specify flags applied only to the current
Makefile (and now deprecated in favor of ccflags-y).
It is still used in arch/mips/kvm/Makefile (and possibly in external
modules too). Passing EXTRA_CFLAGS from the command line overwrites
it and breaks the build.
I also fixed drivers/gpu/drm/tilcdc/Makefile because commit 816175dd1fd7
("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
EXTRA_CFLAGS") was based on the same misunderstanding.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---
Documentation/process/4.Coding.rst | 2 +-
Documentation/process/submit-checklist.rst | 2 +-
Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
drivers/gpu/drm/tilcdc/Makefile | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst
index 0825dc496f22..1f0d81f44e14 100644
--- a/Documentation/process/4.Coding.rst
+++ b/Documentation/process/4.Coding.rst
@@ -242,7 +242,7 @@ and try to avoid "fixes" which make the warning go away without addressing
its cause.
Note that not all compiler warnings are enabled by default. Build the
-kernel with "make EXTRA_CFLAGS=-W" to get the full set.
+kernel with "make KCFLAGS=-W" to get the full set.
The kernel provides several configuration options which turn on debugging
features; most of these are found in the "kernel hacking" submenu. Several
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
index 230ee42f872f..cfc23492b9ea 100644
--- a/Documentation/process/submit-checklist.rst
+++ b/Documentation/process/submit-checklist.rst
@@ -98,7 +98,7 @@ and elsewhere regarding submitting Linux kernel patches.
injection might be appropriate.
21) Newly-added code has been compiled with ``gcc -W`` (use
- ``make EXTRA_CFLAGS=-W``). This will generate lots of noise, but is good
+ ``make KCFLAGS=-W``). This will generate lots of noise, but is good
for finding bugs like "warning: comparison between signed and unsigned".
22) Tested after it has been merged into the -mm patchset to make sure
diff --git a/Documentation/translations/it_IT/process/4.Coding.rst b/Documentation/translations/it_IT/process/4.Coding.rst
index a5e36aa60448..8012fe9497ae 100644
--- a/Documentation/translations/it_IT/process/4.Coding.rst
+++ b/Documentation/translations/it_IT/process/4.Coding.rst
@@ -256,7 +256,7 @@ e cercate di evitare le "riparazioni" che fan sparire l'avvertimento senza
però averne trovato la causa.
Tenete a mente che non tutti gli avvertimenti sono disabilitati di default.
-Costruite il kernel con "make EXTRA_CFLAGS=-W" per ottenerli tutti.
+Costruite il kernel con "make KCFLAGS=-W" per ottenerli tutti.
Il kernel fornisce differenti opzioni che abilitano funzionalità di debugging;
molti di queste sono trovano all'interno del sotto menu "kernel hacking".
diff --git a/Documentation/translations/it_IT/process/submit-checklist.rst b/Documentation/translations/it_IT/process/submit-checklist.rst
index 3e575502690f..614fc17d9086 100644
--- a/Documentation/translations/it_IT/process/submit-checklist.rst
+++ b/Documentation/translations/it_IT/process/submit-checklist.rst
@@ -104,7 +104,7 @@ sottomissione delle patch, in particolare
l'iniezione di fallimenti specifici per il sottosistema.
22) Il nuovo codice è stato compilato con ``gcc -W`` (usate
- ``make EXTRA_CFLAGS=-W``). Questo genererà molti avvisi, ma è ottimo
+ ``make KCFLAGS=-W``). Questo genererà molti avvisi, ma è ottimo
per scovare bachi come "warning: comparison between signed and unsigned".
23) La patch è stata verificata dopo essere stata inclusa nella serie di patch
diff --git a/Documentation/translations/zh_CN/process/4.Coding.rst b/Documentation/translations/zh_CN/process/4.Coding.rst
index 959a06ba025c..66cd8ee07606 100644
--- a/Documentation/translations/zh_CN/process/4.Coding.rst
+++ b/Documentation/translations/zh_CN/process/4.Coding.rst
@@ -165,7 +165,7 @@ Linus对这个问题给出了最佳答案:
通常,这些警告都指向真正的问题。提交以供审阅的代码通常不会产生任何编译器警告。
在消除警告时,注意了解真正的原因,并尽量避免“修复”,使警告消失而不解决其原因。
-请注意,并非所有编译器警告都默认启用。使用“make EXTRA_CFLAGS=-W”构建内核以
+请注意,并非所有编译器警告都默认启用。使用“make KCFLAGS=-W”构建内核以
获得完整集合。
内核提供了几个配置选项,可以打开调试功能;大多数配置选项位于“kernel hacking”
diff --git a/drivers/gpu/drm/tilcdc/Makefile b/drivers/gpu/drm/tilcdc/Makefile
index 662bf3a348c9..f5190477de72 100644
--- a/drivers/gpu/drm/tilcdc/Makefile
+++ b/drivers/gpu/drm/tilcdc/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-ifeq (, $(findstring -W,$(EXTRA_CFLAGS)))
+ifeq (, $(findstring -W,$(KCFLAGS)))
ccflags-y += -Werror
endif
--
2.27.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
2021-02-21 15:25 ` Masahiro Yamada
@ 2021-02-22 5:05 ` Alex Shi
-1 siblings, 0 replies; 8+ messages in thread
From: Alex Shi @ 2021-02-22 5:05 UTC (permalink / raw)
To: Masahiro Yamada, Jonathan Corbet, linux-doc
Cc: Daniel Vetter, David Airlie, Federico Vaga, Harry Wei,
Jyri Sarha, Tomi Valkeinen, dri-devel, linux-kernel
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
在 2021/2/21 下午11:25, Masahiro Yamada 写道:
> You should use KCFLAGS to pass additional compiler flags from the
> command line. Using EXTRA_CFLAGS is wrong.
>
> EXTRA_CFLAGS is supposed to specify flags applied only to the current
> Makefile (and now deprecated in favor of ccflags-y).
>
> It is still used in arch/mips/kvm/Makefile (and possibly in external
> modules too). Passing EXTRA_CFLAGS from the command line overwrites
> it and breaks the build.
>
> I also fixed drivers/gpu/drm/tilcdc/Makefile because commit 816175dd1fd7
> ("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
> EXTRA_CFLAGS") was based on the same misunderstanding.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Documentation/process/4.Coding.rst | 2 +-
> Documentation/process/submit-checklist.rst | 2 +-
> Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
> Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
> Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
> drivers/gpu/drm/tilcdc/Makefile | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
@ 2021-02-22 5:05 ` Alex Shi
0 siblings, 0 replies; 8+ messages in thread
From: Alex Shi @ 2021-02-22 5:05 UTC (permalink / raw)
To: Masahiro Yamada, Jonathan Corbet, linux-doc
Cc: Harry Wei, David Airlie, linux-kernel, Jyri Sarha,
Tomi Valkeinen, dri-devel, Federico Vaga
Reviewed-by: Alex Shi <alex.shi@linux.alibaba.com>
在 2021/2/21 下午11:25, Masahiro Yamada 写道:
> You should use KCFLAGS to pass additional compiler flags from the
> command line. Using EXTRA_CFLAGS is wrong.
>
> EXTRA_CFLAGS is supposed to specify flags applied only to the current
> Makefile (and now deprecated in favor of ccflags-y).
>
> It is still used in arch/mips/kvm/Makefile (and possibly in external
> modules too). Passing EXTRA_CFLAGS from the command line overwrites
> it and breaks the build.
>
> I also fixed drivers/gpu/drm/tilcdc/Makefile because commit 816175dd1fd7
> ("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
> EXTRA_CFLAGS") was based on the same misunderstanding.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Documentation/process/4.Coding.rst | 2 +-
> Documentation/process/submit-checklist.rst | 2 +-
> Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
> Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
> Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
> drivers/gpu/drm/tilcdc/Makefile | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
2021-02-21 15:25 ` Masahiro Yamada
@ 2021-02-22 12:13 ` Federico Vaga
-1 siblings, 0 replies; 8+ messages in thread
From: Federico Vaga @ 2021-02-22 12:13 UTC (permalink / raw)
To: Masahiro Yamada
Cc: Jonathan Corbet, linux-doc, Alex Shi, Daniel Vetter,
David Airlie, Harry Wei, Jyri Sarha, Tomi Valkeinen, dri-devel,
linux-kernel
On 2021-02-21 16:25, Masahiro Yamada wrote:
> You should use KCFLAGS to pass additional compiler flags from the
> command line. Using EXTRA_CFLAGS is wrong.
>
> EXTRA_CFLAGS is supposed to specify flags applied only to the current
> Makefile (and now deprecated in favor of ccflags-y).
>
> It is still used in arch/mips/kvm/Makefile (and possibly in external
> modules too). Passing EXTRA_CFLAGS from the command line overwrites
> it and breaks the build.
>
> I also fixed drivers/gpu/drm/tilcdc/Makefile because commit
> 816175dd1fd7
> ("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
> EXTRA_CFLAGS") was based on the same misunderstanding.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Documentation/process/4.Coding.rst | 2 +-
> Documentation/process/submit-checklist.rst | 2 +-
> Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
> Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
> Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
> drivers/gpu/drm/tilcdc/Makefile | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it>
--
Federico Vaga
http://www.federicovaga.it/
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
@ 2021-02-22 12:13 ` Federico Vaga
0 siblings, 0 replies; 8+ messages in thread
From: Federico Vaga @ 2021-02-22 12:13 UTC (permalink / raw)
To: Masahiro Yamada
Cc: linux-doc, David Airlie, Tomi Valkeinen, Jonathan Corbet,
linux-kernel, Jyri Sarha, Harry Wei, dri-devel, Alex Shi
On 2021-02-21 16:25, Masahiro Yamada wrote:
> You should use KCFLAGS to pass additional compiler flags from the
> command line. Using EXTRA_CFLAGS is wrong.
>
> EXTRA_CFLAGS is supposed to specify flags applied only to the current
> Makefile (and now deprecated in favor of ccflags-y).
>
> It is still used in arch/mips/kvm/Makefile (and possibly in external
> modules too). Passing EXTRA_CFLAGS from the command line overwrites
> it and breaks the build.
>
> I also fixed drivers/gpu/drm/tilcdc/Makefile because commit
> 816175dd1fd7
> ("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
> EXTRA_CFLAGS") was based on the same misunderstanding.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Documentation/process/4.Coding.rst | 2 +-
> Documentation/process/submit-checklist.rst | 2 +-
> Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
> Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
> Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
> drivers/gpu/drm/tilcdc/Makefile | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it>
--
Federico Vaga
http://www.federicovaga.it/
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
2021-02-21 15:25 ` Masahiro Yamada
@ 2021-02-22 20:59 ` Jonathan Corbet
-1 siblings, 0 replies; 8+ messages in thread
From: Jonathan Corbet @ 2021-02-22 20:59 UTC (permalink / raw)
To: Masahiro Yamada, linux-doc
Cc: Masahiro Yamada, Alex Shi, Daniel Vetter, David Airlie,
Federico Vaga, Harry Wei, Jyri Sarha, Tomi Valkeinen, dri-devel,
linux-kernel
Masahiro Yamada <masahiroy@kernel.org> writes:
> You should use KCFLAGS to pass additional compiler flags from the
> command line. Using EXTRA_CFLAGS is wrong.
>
> EXTRA_CFLAGS is supposed to specify flags applied only to the current
> Makefile (and now deprecated in favor of ccflags-y).
>
> It is still used in arch/mips/kvm/Makefile (and possibly in external
> modules too). Passing EXTRA_CFLAGS from the command line overwrites
> it and breaks the build.
>
> I also fixed drivers/gpu/drm/tilcdc/Makefile because commit 816175dd1fd7
> ("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
> EXTRA_CFLAGS") was based on the same misunderstanding.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Documentation/process/4.Coding.rst | 2 +-
> Documentation/process/submit-checklist.rst | 2 +-
> Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
> Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
> Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
> drivers/gpu/drm/tilcdc/Makefile | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
I've applied this, fixing the conflict with submit-checklist.rst in the
process.
Thanks,
jon
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
@ 2021-02-22 20:59 ` Jonathan Corbet
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Corbet @ 2021-02-22 20:59 UTC (permalink / raw)
To: Masahiro Yamada, linux-doc
Cc: David Airlie, Tomi Valkeinen, Masahiro Yamada, linux-kernel,
Jyri Sarha, Harry Wei, dri-devel, Federico Vaga, Alex Shi
Masahiro Yamada <masahiroy@kernel.org> writes:
> You should use KCFLAGS to pass additional compiler flags from the
> command line. Using EXTRA_CFLAGS is wrong.
>
> EXTRA_CFLAGS is supposed to specify flags applied only to the current
> Makefile (and now deprecated in favor of ccflags-y).
>
> It is still used in arch/mips/kvm/Makefile (and possibly in external
> modules too). Passing EXTRA_CFLAGS from the command line overwrites
> it and breaks the build.
>
> I also fixed drivers/gpu/drm/tilcdc/Makefile because commit 816175dd1fd7
> ("drivers/gpu/drm/tilcdc: Makefile, only -Werror when no -W* in
> EXTRA_CFLAGS") was based on the same misunderstanding.
>
> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
> ---
>
> Documentation/process/4.Coding.rst | 2 +-
> Documentation/process/submit-checklist.rst | 2 +-
> Documentation/translations/it_IT/process/4.Coding.rst | 2 +-
> Documentation/translations/it_IT/process/submit-checklist.rst | 2 +-
> Documentation/translations/zh_CN/process/4.Coding.rst | 2 +-
> drivers/gpu/drm/tilcdc/Makefile | 2 +-
> 6 files changed, 6 insertions(+), 6 deletions(-)
I've applied this, fixing the conflict with submit-checklist.rst in the
process.
Thanks,
jon
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-02-22 21:00 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-21 15:25 [PATCH] doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line Masahiro Yamada
2021-02-21 15:25 ` Masahiro Yamada
2021-02-22 5:05 ` Alex Shi
2021-02-22 5:05 ` Alex Shi
2021-02-22 12:13 ` Federico Vaga
2021-02-22 12:13 ` Federico Vaga
2021-02-22 20:59 ` Jonathan Corbet
2021-02-22 20:59 ` Jonathan Corbet
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.