* [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards
@ 2023-06-15 12:37 Camelia Groza
2023-06-15 12:37 ` [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux Camelia Groza
` (6 more replies)
0 siblings, 7 replies; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
This series enables DM_SERIAL for ls1043ardb, ls1046ardb and
ls1046afrwy.
First, the device tree serial nodes are synced with their counterpart
descriptions in Linux.
Secondly, the serial nodes are tagged with 'bootph-all' to guarantee
the drivers are initialized before relocation.
Lastly, CONFIG_DM_SERIAL is enabled in the relevant defconfigs.
Camelia Groza (7):
arch: arm: dts: ls1043a: sync serial nodes with Linux
arch: arm: dts: ls1043a: tag the serial nodes with bootph-all
configs: ls1043ardb: enable DM_SERIAL
arch: arm: dts: ls1046a: sync serial nodes with Linux
arch: arm: dts: ls1046a: tag the serial nodes with bootph-all
configs: ls1046ardb: enable DM_SERIAL
configs: ls1046afrwy: enable DM_SERIAL
arch/arm/dts/fsl-ls1043a-qds.dtsi | 2 +-
arch/arm/dts/fsl-ls1043a-rdb.dts | 6 +++-
arch/arm/dts/fsl-ls1043a.dtsi | 20 +++++++++----
arch/arm/dts/fsl-ls1046a-frwy.dts | 22 ++++++++++++++-
arch/arm/dts/fsl-ls1046a-qds.dtsi | 2 +-
arch/arm/dts/fsl-ls1046a-rdb.dts | 14 +++++++++-
arch/arm/dts/fsl-ls1046a.dtsi | 28 +++++++++++++------
configs/ls1043ardb_SECURE_BOOT_defconfig | 4 ++-
configs/ls1043ardb_defconfig | 4 ++-
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 4 ++-
configs/ls1043ardb_nand_defconfig | 3 +-
.../ls1043ardb_sdcard_SECURE_BOOT_defconfig | 4 ++-
configs/ls1043ardb_sdcard_defconfig | 3 +-
configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 4 ++-
configs/ls1043ardb_tfa_defconfig | 4 ++-
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 4 ++-
configs/ls1046afrwy_tfa_defconfig | 4 ++-
configs/ls1046ardb_emmc_defconfig | 3 +-
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 4 ++-
configs/ls1046ardb_qspi_defconfig | 4 ++-
configs/ls1046ardb_qspi_spl_defconfig | 3 +-
.../ls1046ardb_sdcard_SECURE_BOOT_defconfig | 4 ++-
configs/ls1046ardb_sdcard_defconfig | 3 +-
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 4 ++-
configs/ls1046ardb_tfa_defconfig | 4 ++-
25 files changed, 124 insertions(+), 37 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
2023-06-16 1:10 ` Peng Fan
2023-06-15 12:37 ` [PATCH 2/7] arch: arm: dts: ls1043a: tag serial nodes with bootph-all Camelia Groza
` (5 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
Pick up the serial node descriptions from Linux for the ls1043ardb board
and its dependencies. Including the fsl,qoriq-clockgen.h and arm-gic.h
headers forces us to change the include directives to explicitly go through
the C preprocessor for all boards in the ls1043a SoC family.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/arm/dts/fsl-ls1043a-qds.dtsi | 2 +-
arch/arm/dts/fsl-ls1043a-rdb.dts | 6 +++++-
arch/arm/dts/fsl-ls1043a.dtsi | 16 +++++++++++-----
3 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
index 884bdad196b3..5e02cd91d75f 100644
--- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
@@ -7,7 +7,7 @@
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
/ {
model = "LS1043A QDS Board";
diff --git a/arch/arm/dts/fsl-ls1043a-rdb.dts b/arch/arm/dts/fsl-ls1043a-rdb.dts
index 9e7c79fd2b98..f5b3bb68b3db 100644
--- a/arch/arm/dts/fsl-ls1043a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1043a-rdb.dts
@@ -9,13 +9,17 @@
*/
/dts-v1/;
-/include/ "fsl-ls1043a.dtsi"
+#include "fsl-ls1043a.dtsi"
/ {
model = "LS1043A RDB Board";
aliases {
spi1 = &dspi0;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ serial2 = &duart2;
+ serial3 = &duart3;
};
};
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index 4960973a6035..21643a1d951f 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -8,7 +8,9 @@
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
-/include/ "skeleton64.dtsi"
+#include "skeleton64.dtsi"
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1043a";
@@ -223,28 +225,32 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
lpuart0: serial@2950000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 2/7] arch: arm: dts: ls1043a: tag serial nodes with bootph-all
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
2023-06-15 12:37 ` [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
2023-06-16 1:11 ` Peng Fan
2023-06-15 12:37 ` [PATCH 3/7] configs: ls1043ardb: enable DM_SERIAL Camelia Groza
` (4 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
Make sure the serial driver is initialized before relocation by tagging
the serial nodes with "bootph-all".
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/arm/dts/fsl-ls1043a.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
index 21643a1d951f..79f67e7183c3 100644
--- a/arch/arm/dts/fsl-ls1043a.dtsi
+++ b/arch/arm/dts/fsl-ls1043a.dtsi
@@ -227,6 +227,7 @@
interrupts = <0 54 0x4>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ bootph-all;
};
duart1: serial@21c0600 {
@@ -235,6 +236,7 @@
interrupts = <0 54 0x4>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ bootph-all;
};
duart2: serial@21d0500 {
@@ -243,6 +245,7 @@
interrupts = <0 55 0x4>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ bootph-all;
};
duart3: serial@21d0600 {
@@ -251,6 +254,7 @@
interrupts = <0 55 0x4>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(1)>;
+ bootph-all;
};
lpuart0: serial@2950000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 3/7] configs: ls1043ardb: enable DM_SERIAL
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
2023-06-15 12:37 ` [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux Camelia Groza
2023-06-15 12:37 ` [PATCH 2/7] arch: arm: dts: ls1043a: tag serial nodes with bootph-all Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
2023-06-15 12:37 ` [PATCH 4/7] arch: arm: dts: ls1046a: sync serial nodes with Linux Camelia Groza
` (3 subsequent siblings)
6 siblings, 0 replies; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
As the serial devices are configured in the device tree, enable
DM_SERIAL in the ls1043ardb defconfigs.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
configs/ls1043ardb_SECURE_BOOT_defconfig | 4 +++-
configs/ls1043ardb_defconfig | 4 +++-
configs/ls1043ardb_nand_SECURE_BOOT_defconfig | 4 +++-
configs/ls1043ardb_nand_defconfig | 3 ++-
configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig | 4 +++-
configs/ls1043ardb_sdcard_defconfig | 3 ++-
configs/ls1043ardb_tfa_SECURE_BOOT_defconfig | 4 +++-
configs/ls1043ardb_tfa_defconfig | 4 +++-
8 files changed, 22 insertions(+), 8 deletions(-)
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 069a8dc0c3ce..ea195d7c5041 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -86,7 +86,9 @@ CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FW_ADDR=0x60940000
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_defconfig b/configs/ls1043ardb_defconfig
index e796c0a9a2e0..ae8600ffd958 100644
--- a/configs/ls1043ardb_defconfig
+++ b/configs/ls1043ardb_defconfig
@@ -89,7 +89,9 @@ CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FW_ADDR=0x60940000
CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index f5faa02e5920..d9ff0fd16a58 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -110,7 +110,9 @@ CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig
index b75550b2d3ad..ad118187432e 100644
--- a/configs/ls1043ardb_nand_defconfig
+++ b/configs/ls1043ardb_nand_defconfig
@@ -117,7 +117,8 @@ CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPL_SYS_NS16550_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index 3e0d16430e04..fe0dd04f1f90 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -110,7 +110,9 @@ CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FW_ADDR=0x940000
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig
index 04e66f1e6ca2..aa5404cbb50e 100644
--- a/configs/ls1043ardb_sdcard_defconfig
+++ b/configs/ls1043ardb_sdcard_defconfig
@@ -115,7 +115,8 @@ CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FW_ADDR=0x940000
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPL_SYS_NS16550_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index cf4623eb631d..480e928936a9 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -84,7 +84,9 @@ CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FW_ADDR=0x940000
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
diff --git a/configs/ls1043ardb_tfa_defconfig b/configs/ls1043ardb_tfa_defconfig
index 15e2916538a1..e25904170858 100644
--- a/configs/ls1043ardb_tfa_defconfig
+++ b/configs/ls1043ardb_tfa_defconfig
@@ -90,7 +90,9 @@ CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_NVME_PCI=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_SYS_QE_FW_ADDR=0x940000
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_USB=y
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 4/7] arch: arm: dts: ls1046a: sync serial nodes with Linux
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
` (2 preceding siblings ...)
2023-06-15 12:37 ` [PATCH 3/7] configs: ls1043ardb: enable DM_SERIAL Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
2023-06-16 1:12 ` Peng Fan
2023-06-15 12:37 ` [PATCH 5/7] arch: arm: dts: ls1046a: tag serial nodes with bootph-all Camelia Groza
` (2 subsequent siblings)
6 siblings, 1 reply; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
Pick up the serial node descriptions from Linux for the ls1046ardb and
ls1046afrwy boards and their dependencies. Including the
fsl,qoriq-clockgen.h and arm-gic.h headers forces us to change the include
directives to explicitly go through the C preprocessor for all boards in
the ls1046a SoC family.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/arm/dts/fsl-ls1046a-frwy.dts | 22 +++++++++++++++++++++-
arch/arm/dts/fsl-ls1046a-qds.dtsi | 2 +-
arch/arm/dts/fsl-ls1046a-rdb.dts | 14 +++++++++++++-
arch/arm/dts/fsl-ls1046a.dtsi | 24 +++++++++++++++---------
4 files changed, 50 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts
index cda05411d881..f3ba2acd6d51 100644
--- a/arch/arm/dts/fsl-ls1046a-frwy.dts
+++ b/arch/arm/dts/fsl-ls1046a-frwy.dts
@@ -7,17 +7,37 @@
*/
/dts-v1/;
-/include/ "fsl-ls1046a.dtsi"
+#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A FRWY Board";
aliases {
spi0 = &qspi;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ serial2 = &duart2;
+ serial3 = &duart3;
};
};
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&duart2 {
+ status = "okay";
+};
+
+&duart3 {
+ status = "okay";
+};
+
&qspi {
status = "okay";
diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
index fec5c8ddb23a..d66824975c5e 100644
--- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
@@ -7,7 +7,7 @@
* Mingkai Hu <Mingkai.hu@nxp.com>
*/
-/include/ "fsl-ls1046a.dtsi"
+#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A QDS Board";
diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
index 464129291c91..66d718905c7d 100644
--- a/arch/arm/dts/fsl-ls1046a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
@@ -9,17 +9,29 @@
*/
/dts-v1/;
-/include/ "fsl-ls1046a.dtsi"
+#include "fsl-ls1046a.dtsi"
/ {
model = "LS1046A RDB Board";
aliases {
spi0 = &qspi;
+ serial0 = &duart0;
+ serial1 = &duart1;
+ serial2 = &duart2;
+ serial3 = &duart3;
};
};
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
&qspi {
status = "okay";
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 060dc399c2f6..9fdd398e2c4c 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -8,7 +8,9 @@
* Mingkai Hu <mingkai.hu@nxp.com>
*/
-/include/ "skeleton64.dtsi"
+#include "skeleton64.dtsi"
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "fsl,ls1046a";
@@ -222,29 +224,33 @@
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
- interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
- interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
duart2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
- interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
duart3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
- interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
lpuart0: serial@2950000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 5/7] arch: arm: dts: ls1046a: tag serial nodes with bootph-all
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
` (3 preceding siblings ...)
2023-06-15 12:37 ` [PATCH 4/7] arch: arm: dts: ls1046a: sync serial nodes with Linux Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
2023-06-16 1:12 ` Peng Fan
2023-06-15 12:37 ` [PATCH 6/7] configs: ls1046ardb: enable DM_SERIAL Camelia Groza
2023-06-15 12:37 ` [PATCH 7/7] configs: ls1046afrwy: " Camelia Groza
6 siblings, 1 reply; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
Make sure the serial driver is initialized before relocation by tagging
the serial nodes with "bootph-all".
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
arch/arm/dts/fsl-ls1046a.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
index 9fdd398e2c4c..3986360c0c93 100644
--- a/arch/arm/dts/fsl-ls1046a.dtsi
+++ b/arch/arm/dts/fsl-ls1046a.dtsi
@@ -227,6 +227,7 @@
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ bootph-all;
};
duart1: serial@21c0600 {
@@ -235,6 +236,7 @@
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ bootph-all;
};
duart2: serial@21d0500 {
@@ -243,6 +245,7 @@
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ bootph-all;
};
duart3: serial@21d0600 {
@@ -251,6 +254,7 @@
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(2)>;
+ bootph-all;
};
lpuart0: serial@2950000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 6/7] configs: ls1046ardb: enable DM_SERIAL
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
` (4 preceding siblings ...)
2023-06-15 12:37 ` [PATCH 5/7] arch: arm: dts: ls1046a: tag serial nodes with bootph-all Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
2023-06-15 12:37 ` [PATCH 7/7] configs: ls1046afrwy: " Camelia Groza
6 siblings, 0 replies; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
As the serial devices are configured in the device tree, enable
DM_SERIAL in the ls1046ardb defconfigs.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
configs/ls1046ardb_emmc_defconfig | 3 ++-
configs/ls1046ardb_qspi_SECURE_BOOT_defconfig | 4 +++-
configs/ls1046ardb_qspi_defconfig | 4 +++-
configs/ls1046ardb_qspi_spl_defconfig | 3 ++-
configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig | 4 +++-
configs/ls1046ardb_sdcard_defconfig | 3 ++-
configs/ls1046ardb_tfa_SECURE_BOOT_defconfig | 4 +++-
configs/ls1046ardb_tfa_defconfig | 4 +++-
8 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig
index 7be98df566fc..924ff78b4593 100644
--- a/configs/ls1046ardb_emmc_defconfig
+++ b/configs/ls1046ardb_emmc_defconfig
@@ -111,7 +111,8 @@ CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPL_SYS_NS16550_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index 3cefae092f34..bb278845e069 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -86,7 +86,9 @@ CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig
index 02979dd2ff01..0fb1a6c281e5 100644
--- a/configs/ls1046ardb_qspi_defconfig
+++ b/configs/ls1046ardb_qspi_defconfig
@@ -90,7 +90,9 @@ CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 8f7d05fab976..eb0184c59276 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -118,7 +118,8 @@ CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPL_SYS_NS16550_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index 900e26be3be0..2813c79f5975 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -109,7 +109,9 @@ CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_SCSI_AHCI_PLAT=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig
index ded6be50a3f6..a621859aa792 100644
--- a/configs/ls1046ardb_sdcard_defconfig
+++ b/configs/ls1046ardb_sdcard_defconfig
@@ -111,7 +111,8 @@ CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPL_SYS_NS16550_SERIAL=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 3eaa985ec79b..fbcf294eb534 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -79,7 +79,9 @@ CONFIG_PCIE_LAYERSCAPE_EP=y
CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046ardb_tfa_defconfig b/configs/ls1046ardb_tfa_defconfig
index 7e8d86d03c4c..24a54230f8ee 100644
--- a/configs/ls1046ardb_tfa_defconfig
+++ b/configs/ls1046ardb_tfa_defconfig
@@ -85,7 +85,9 @@ CONFIG_PCIE_LAYERSCAPE_EP=y
CONFIG_POWER_LEGACY=y
CONFIG_POWER_I2C=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH 7/7] configs: ls1046afrwy: enable DM_SERIAL
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
` (5 preceding siblings ...)
2023-06-15 12:37 ` [PATCH 6/7] configs: ls1046ardb: enable DM_SERIAL Camelia Groza
@ 2023-06-15 12:37 ` Camelia Groza
6 siblings, 0 replies; 12+ messages in thread
From: Camelia Groza @ 2023-06-15 12:37 UTC (permalink / raw)
To: peng.fan, mingkai.hu, pramod.kumar_1, u-boot; +Cc: Camelia Groza
As the serial devices are configured in the device tree, enable
DM_SERIAL in the ls1046afrwy defconfigs.
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 4 +++-
configs/ls1046afrwy_tfa_defconfig | 4 +++-
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
index 8d6a1371acb7..e97092f2c9b7 100644
--- a/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
@@ -67,7 +67,9 @@ CONFIG_FMAN_ENET=y
CONFIG_SYS_FMAN_FW_ADDR=0x900000
CONFIG_DM_PCI_COMPAT=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
diff --git a/configs/ls1046afrwy_tfa_defconfig b/configs/ls1046afrwy_tfa_defconfig
index e5d2b556f783..fdf08ad3c63c 100644
--- a/configs/ls1046afrwy_tfa_defconfig
+++ b/configs/ls1046afrwy_tfa_defconfig
@@ -76,7 +76,9 @@ CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_LAYERSCAPE_RC=y
CONFIG_PCIE_LAYERSCAPE_EP=y
CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550_SERIAL=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_FSL_QSPI=y
--
2.17.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux
2023-06-15 12:37 ` [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux Camelia Groza
@ 2023-06-16 1:10 ` Peng Fan
0 siblings, 0 replies; 12+ messages in thread
From: Peng Fan @ 2023-06-16 1:10 UTC (permalink / raw)
To: Camelia Groza, mingkai.hu, pramod.kumar_1, u-boot
On 6/15/2023 8:37 PM, Camelia Groza wrote:
> Pick up the serial node descriptions from Linux for the ls1043ardb board
> and its dependencies. Including the fsl,qoriq-clockgen.h and arm-gic.h
> headers forces us to change the include directives to explicitly go through
> the C preprocessor for all boards in the ls1043a SoC family.
Better add the tag or commit of linux kernel that you sync from.
Other than that, Acked-by: Peng Fan <peng.fan@nxp.com>
>
> Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> ---
> arch/arm/dts/fsl-ls1043a-qds.dtsi | 2 +-
> arch/arm/dts/fsl-ls1043a-rdb.dts | 6 +++++-
> arch/arm/dts/fsl-ls1043a.dtsi | 16 +++++++++++-----
> 3 files changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/dts/fsl-ls1043a-qds.dtsi b/arch/arm/dts/fsl-ls1043a-qds.dtsi
> index 884bdad196b3..5e02cd91d75f 100644
> --- a/arch/arm/dts/fsl-ls1043a-qds.dtsi
> +++ b/arch/arm/dts/fsl-ls1043a-qds.dtsi
> @@ -7,7 +7,7 @@
> * Mingkai Hu <Mingkai.hu@freescale.com>
> */
>
> -/include/ "fsl-ls1043a.dtsi"
> +#include "fsl-ls1043a.dtsi"
>
> / {
> model = "LS1043A QDS Board";
> diff --git a/arch/arm/dts/fsl-ls1043a-rdb.dts b/arch/arm/dts/fsl-ls1043a-rdb.dts
> index 9e7c79fd2b98..f5b3bb68b3db 100644
> --- a/arch/arm/dts/fsl-ls1043a-rdb.dts
> +++ b/arch/arm/dts/fsl-ls1043a-rdb.dts
> @@ -9,13 +9,17 @@
> */
>
> /dts-v1/;
> -/include/ "fsl-ls1043a.dtsi"
> +#include "fsl-ls1043a.dtsi"
>
> / {
> model = "LS1043A RDB Board";
>
> aliases {
> spi1 = &dspi0;
> + serial0 = &duart0;
> + serial1 = &duart1;
> + serial2 = &duart2;
> + serial3 = &duart3;
> };
>
> };
> diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
> index 4960973a6035..21643a1d951f 100644
> --- a/arch/arm/dts/fsl-ls1043a.dtsi
> +++ b/arch/arm/dts/fsl-ls1043a.dtsi
> @@ -8,7 +8,9 @@
> * Mingkai Hu <Mingkai.hu@freescale.com>
> */
>
> -/include/ "skeleton64.dtsi"
> +#include "skeleton64.dtsi"
> +#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> compatible = "fsl,ls1043a";
> @@ -223,28 +225,32 @@
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0500 0x0 0x100>;
> interrupts = <0 54 0x4>;
> - clocks = <&clockgen 4 0>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(1)>;
> };
>
> duart1: serial@21c0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0600 0x0 0x100>;
> interrupts = <0 54 0x4>;
> - clocks = <&clockgen 4 0>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(1)>;
> };
>
> duart2: serial@21d0500 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x0 0x21d0500 0x0 0x100>;
> interrupts = <0 55 0x4>;
> - clocks = <&clockgen 4 0>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(1)>;
> };
>
> duart3: serial@21d0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x0 0x21d0600 0x0 0x100>;
> interrupts = <0 55 0x4>;
> - clocks = <&clockgen 4 0>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(1)>;
> };
>
> lpuart0: serial@2950000 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/7] arch: arm: dts: ls1043a: tag serial nodes with bootph-all
2023-06-15 12:37 ` [PATCH 2/7] arch: arm: dts: ls1043a: tag serial nodes with bootph-all Camelia Groza
@ 2023-06-16 1:11 ` Peng Fan
0 siblings, 0 replies; 12+ messages in thread
From: Peng Fan @ 2023-06-16 1:11 UTC (permalink / raw)
To: Camelia Groza, mingkai.hu, pramod.kumar_1, u-boot
On 6/15/2023 8:37 PM, Camelia Groza wrote:
> Make sure the serial driver is initialized before relocation by tagging
> the serial nodes with "bootph-all".
Please add fsl-ls1043a-u-boot.dtsi for U-Boot specific changes.
Regards,
Peng.
>
> Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> ---
> arch/arm/dts/fsl-ls1043a.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/dts/fsl-ls1043a.dtsi b/arch/arm/dts/fsl-ls1043a.dtsi
> index 21643a1d951f..79f67e7183c3 100644
> --- a/arch/arm/dts/fsl-ls1043a.dtsi
> +++ b/arch/arm/dts/fsl-ls1043a.dtsi
> @@ -227,6 +227,7 @@
> interrupts = <0 54 0x4>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> + bootph-all;
> };
>
> duart1: serial@21c0600 {
> @@ -235,6 +236,7 @@
> interrupts = <0 54 0x4>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> + bootph-all;
> };
>
> duart2: serial@21d0500 {
> @@ -243,6 +245,7 @@
> interrupts = <0 55 0x4>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> + bootph-all;
> };
>
> duart3: serial@21d0600 {
> @@ -251,6 +254,7 @@
> interrupts = <0 55 0x4>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(1)>;
> + bootph-all;
> };
>
> lpuart0: serial@2950000 {
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 4/7] arch: arm: dts: ls1046a: sync serial nodes with Linux
2023-06-15 12:37 ` [PATCH 4/7] arch: arm: dts: ls1046a: sync serial nodes with Linux Camelia Groza
@ 2023-06-16 1:12 ` Peng Fan
0 siblings, 0 replies; 12+ messages in thread
From: Peng Fan @ 2023-06-16 1:12 UTC (permalink / raw)
To: Camelia Groza, mingkai.hu, pramod.kumar_1, u-boot
On 6/15/2023 8:37 PM, Camelia Groza wrote:
> Pick up the serial node descriptions from Linux for the ls1046ardb and
> ls1046afrwy boards and their dependencies. Including the
> fsl,qoriq-clockgen.h and arm-gic.h headers forces us to change the include
> directives to explicitly go through the C preprocessor for all boards in
> the ls1046a SoC family.
Add the tag or commit of linux kernel.
Regards,
Peng.
>
> Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> ---
> arch/arm/dts/fsl-ls1046a-frwy.dts | 22 +++++++++++++++++++++-
> arch/arm/dts/fsl-ls1046a-qds.dtsi | 2 +-
> arch/arm/dts/fsl-ls1046a-rdb.dts | 14 +++++++++++++-
> arch/arm/dts/fsl-ls1046a.dtsi | 24 +++++++++++++++---------
> 4 files changed, 50 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/dts/fsl-ls1046a-frwy.dts b/arch/arm/dts/fsl-ls1046a-frwy.dts
> index cda05411d881..f3ba2acd6d51 100644
> --- a/arch/arm/dts/fsl-ls1046a-frwy.dts
> +++ b/arch/arm/dts/fsl-ls1046a-frwy.dts
> @@ -7,17 +7,37 @@
> */
>
> /dts-v1/;
> -/include/ "fsl-ls1046a.dtsi"
> +#include "fsl-ls1046a.dtsi"
>
> / {
> model = "LS1046A FRWY Board";
>
> aliases {
> spi0 = &qspi;
> + serial0 = &duart0;
> + serial1 = &duart1;
> + serial2 = &duart2;
> + serial3 = &duart3;
> };
>
> };
>
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> +&duart2 {
> + status = "okay";
> +};
> +
> +&duart3 {
> + status = "okay";
> +};
> +
> &qspi {
> status = "okay";
>
> diff --git a/arch/arm/dts/fsl-ls1046a-qds.dtsi b/arch/arm/dts/fsl-ls1046a-qds.dtsi
> index fec5c8ddb23a..d66824975c5e 100644
> --- a/arch/arm/dts/fsl-ls1046a-qds.dtsi
> +++ b/arch/arm/dts/fsl-ls1046a-qds.dtsi
> @@ -7,7 +7,7 @@
> * Mingkai Hu <Mingkai.hu@nxp.com>
> */
>
> -/include/ "fsl-ls1046a.dtsi"
> +#include "fsl-ls1046a.dtsi"
>
> / {
> model = "LS1046A QDS Board";
> diff --git a/arch/arm/dts/fsl-ls1046a-rdb.dts b/arch/arm/dts/fsl-ls1046a-rdb.dts
> index 464129291c91..66d718905c7d 100644
> --- a/arch/arm/dts/fsl-ls1046a-rdb.dts
> +++ b/arch/arm/dts/fsl-ls1046a-rdb.dts
> @@ -9,17 +9,29 @@
> */
>
> /dts-v1/;
> -/include/ "fsl-ls1046a.dtsi"
> +#include "fsl-ls1046a.dtsi"
>
> / {
> model = "LS1046A RDB Board";
>
> aliases {
> spi0 = &qspi;
> + serial0 = &duart0;
> + serial1 = &duart1;
> + serial2 = &duart2;
> + serial3 = &duart3;
> };
>
> };
>
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> &qspi {
> status = "okay";
>
> diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
> index 060dc399c2f6..9fdd398e2c4c 100644
> --- a/arch/arm/dts/fsl-ls1046a.dtsi
> +++ b/arch/arm/dts/fsl-ls1046a.dtsi
> @@ -8,7 +8,9 @@
> * Mingkai Hu <mingkai.hu@nxp.com>
> */
>
> -/include/ "skeleton64.dtsi"
> +#include "skeleton64.dtsi"
> +#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> / {
> compatible = "fsl,ls1046a";
> @@ -222,29 +224,33 @@
> duart0: serial@21c0500 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0500 0x0 0x100>;
> - interrupts = <0 54 0x4>;
> - clocks = <&clockgen 4 0>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> };
>
> duart1: serial@21c0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x00 0x21c0600 0x0 0x100>;
> - interrupts = <0 54 0x4>;
> - clocks = <&clockgen 4 0>;
> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> };
>
> duart2: serial@21d0500 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x0 0x21d0500 0x0 0x100>;
> - interrupts = <0 55 0x4>;
> - clocks = <&clockgen 4 0>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> };
>
> duart3: serial@21d0600 {
> compatible = "fsl,ns16550", "ns16550a";
> reg = <0x0 0x21d0600 0x0 0x100>;
> - interrupts = <0 55 0x4>;
> - clocks = <&clockgen 4 0>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> + QORIQ_CLK_PLL_DIV(2)>;
> };
>
> lpuart0: serial@2950000 {
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 5/7] arch: arm: dts: ls1046a: tag serial nodes with bootph-all
2023-06-15 12:37 ` [PATCH 5/7] arch: arm: dts: ls1046a: tag serial nodes with bootph-all Camelia Groza
@ 2023-06-16 1:12 ` Peng Fan
0 siblings, 0 replies; 12+ messages in thread
From: Peng Fan @ 2023-06-16 1:12 UTC (permalink / raw)
To: Camelia Groza, mingkai.hu, pramod.kumar_1, u-boot
On 6/15/2023 8:37 PM, Camelia Groza wrote:
> Make sure the serial driver is initialized before relocation by tagging
> the serial nodes with "bootph-all".
Add fsl-ls1046a-u-boot.dtsi for U-Boot specific changes.
Thanks,
Peng.
>
> Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
> ---
> arch/arm/dts/fsl-ls1046a.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/dts/fsl-ls1046a.dtsi b/arch/arm/dts/fsl-ls1046a.dtsi
> index 9fdd398e2c4c..3986360c0c93 100644
> --- a/arch/arm/dts/fsl-ls1046a.dtsi
> +++ b/arch/arm/dts/fsl-ls1046a.dtsi
> @@ -227,6 +227,7 @@
> interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + bootph-all;
> };
>
> duart1: serial@21c0600 {
> @@ -235,6 +236,7 @@
> interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + bootph-all;
> };
>
> duart2: serial@21d0500 {
> @@ -243,6 +245,7 @@
> interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + bootph-all;
> };
>
> duart3: serial@21d0600 {
> @@ -251,6 +254,7 @@
> interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + bootph-all;
> };
>
> lpuart0: serial@2950000 {
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2023-06-16 1:12 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-15 12:37 [PATCH 0/7] Enable DM_SERIAL for the LS104xA RDB/FRWY boards Camelia Groza
2023-06-15 12:37 ` [PATCH 1/7] arch: arm: dts: ls1043a: sync serial nodes with Linux Camelia Groza
2023-06-16 1:10 ` Peng Fan
2023-06-15 12:37 ` [PATCH 2/7] arch: arm: dts: ls1043a: tag serial nodes with bootph-all Camelia Groza
2023-06-16 1:11 ` Peng Fan
2023-06-15 12:37 ` [PATCH 3/7] configs: ls1043ardb: enable DM_SERIAL Camelia Groza
2023-06-15 12:37 ` [PATCH 4/7] arch: arm: dts: ls1046a: sync serial nodes with Linux Camelia Groza
2023-06-16 1:12 ` Peng Fan
2023-06-15 12:37 ` [PATCH 5/7] arch: arm: dts: ls1046a: tag serial nodes with bootph-all Camelia Groza
2023-06-16 1:12 ` Peng Fan
2023-06-15 12:37 ` [PATCH 6/7] configs: ls1046ardb: enable DM_SERIAL Camelia Groza
2023-06-15 12:37 ` [PATCH 7/7] configs: ls1046afrwy: " Camelia Groza
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.