[PATCH 0/3] cpufreq: dt: Create platform device from generic code

[PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Viresh Kumar]

Multiple platforms are using the generic cpufreq-dt driver now, and all
of them are required to create a platform device with name "cpufreq-dt",
in order to get the cpufreq-dt probed.

Many of them do it from platform code, others have special drivers just
to do that.

It would be more sensible to do this at a generic place, where all such
platform can mark their entries.

The first patch fixes an issue that becomes visible only after the
second patch is applied. The second one creates a new driver to create
platform-device based on current platform and the last one converts
exynos platform to use this common infrastructure.

I will migrate rest of the platforms after this is accepted as the right
way ahead.

@Arnd: Does this look sane? We can fix the arm64 (no platform code)
issue with this now.

Viresh Kumar (3):
  cpufreq: dt: Include types.h from cpufreq-dt.h
  cpufreq: dt: Add generic platform-device creation support
  cpufreq: exynos: Use generic platdev driver

 arch/arm/mach-exynos/exynos.c        | 25 -----------------
 drivers/cpufreq/Kconfig              | 11 ++++++++
 drivers/cpufreq/Makefile             |  1 +
 drivers/cpufreq/cpufreq-dt-platdev.c | 53 ++++++++++++++++++++++++++++++++++++
 include/linux/cpufreq-dt.h           |  2 ++
 5 files changed, 67 insertions(+), 25 deletions(-)
 create mode 100644 drivers/cpufreq/cpufreq-dt-platdev.c

-- 
2.7.1.410.g6faf27b

[PATCH 1/3] cpufreq: dt: Include types.h from cpufreq-dt.h

[Viresh Kumar]

cpufreq-dt.h uses 'bool' data type but doesn't include types.h. It works
fine for now as the files that include cpufreq-dt.h, also include
types.h directly or indirectly.

But, when a file includes cpufreq-dt.h without including types.h, we get
a build error. Avoid such errors by including types.h in cpufreq-dt
itself.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 include/linux/cpufreq-dt.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/cpufreq-dt.h b/include/linux/cpufreq-dt.h
index 0414009e2c30..a87335a1660c 100644
--- a/include/linux/cpufreq-dt.h
+++ b/include/linux/cpufreq-dt.h
@@ -10,6 +10,8 @@
 #ifndef __CPUFREQ_DT_H__
 #define __CPUFREQ_DT_H__
 
+#include <linux/types.h>
+
 struct cpufreq_dt_platform_data {
 	/*
 	 * True when each CPU has its own clock to control its
-- 
2.7.1.410.g6faf27b

[PATCH 2/3] cpufreq: dt: Add generic platform-device creation support

[Viresh Kumar]

Multiple platforms are using the generic cpufreq-dt driver now, and all
of them are required to create a platform device with name "cpufreq-dt",
in order to get the cpufreq-dt probed.

Many of them do it from platform code, others have special drivers just
to do that.

It would be more sensible to do this at a generic place, where all such
platform can mark their entries.

This patch adds a separate file to get this device created. Currently
the compat list of platforms that we support is empty, and will be
filled in as and when we move platforms to use it.

It always compiles as part of the kernel and so doesn't need a
module-exit operation.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/cpufreq/Kconfig              | 11 +++++++++
 drivers/cpufreq/Makefile             |  1 +
 drivers/cpufreq/cpufreq-dt-platdev.c | 48 ++++++++++++++++++++++++++++++++++++
 3 files changed, 60 insertions(+)
 create mode 100644 drivers/cpufreq/cpufreq-dt-platdev.c

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index a7f45853c103..08573d54105b 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -191,6 +191,7 @@ config CPUFREQ_DT
 	depends on HAVE_CLK && OF
 	# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
 	depends on !CPU_THERMAL || THERMAL
+	select CPUFREQ_DT_PLATDEV
 	select PM_OPP
 	help
 	  This adds a generic DT based cpufreq driver for frequency management.
@@ -199,6 +200,16 @@ config CPUFREQ_DT
 
 	  If in doubt, say N.
 
+config CPUFREQ_DT_PLATDEV
+	bool
+	depends on CPUFREQ_DT
+	help
+	  This adds a generic DT based cpufreq platdev driver for frequency
+	  management.  This creates a 'cpufreq-dt' platform device, on the
+	  supported platforms.
+
+	  If in doubt, say N.
+
 if X86
 source "drivers/cpufreq/Kconfig.x86"
 endif
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9e63fb1b09f8..b9224fdb8322 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 obj-$(CONFIG_CPU_FREQ_GOV_COMMON)		+= cpufreq_governor.o
 
 obj-$(CONFIG_CPUFREQ_DT)		+= cpufreq-dt.o
+obj-$(CONFIG_CPUFREQ_DT_PLATDEV)	+= cpufreq-dt-platdev.o
 
 ##################################################################################
 # x86 drivers.
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
new file mode 100644
index 000000000000..18b81724ca0b
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2016 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq-dt.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+struct cpufreq_dt_compat {
+	const char *compatible;
+	const void *data;
+	size_t size;
+};
+
+static struct cpufreq_dt_compat compat[] = {
+};
+
+static int __init cpufreq_dt_platdev_init(void)
+{
+	struct platform_device *pdev;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(compat); i++) {
+		if (!of_machine_is_compatible(compat[i].compatible))
+			continue;
+
+		pdev = platform_device_register_data(NULL, "cpufreq-dt", -1,
+						     compat[i].data,
+						     compat[i].size);
+
+		return PTR_ERR_OR_ZERO(pdev);
+	}
+
+	return -ENODEV;
+}
+module_init(cpufreq_dt_platdev_init);
+
+MODULE_ALIAS("cpufreq-dt-platdev");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("cpufreq-dt platdev driver");
+MODULE_LICENSE("GPL");
-- 
2.7.1.410.g6faf27b

Re: [PATCH 2/3] cpufreq: dt: Add generic platform-device creation support

[Krzysztof Kozlowski]

On 24.03.2016 15:40, Viresh Kumar wrote:
> Multiple platforms are using the generic cpufreq-dt driver now, and all
> of them are required to create a platform device with name "cpufreq-dt",
> in order to get the cpufreq-dt probed.
> 
> Many of them do it from platform code, others have special drivers just
> to do that.
> 
> It would be more sensible to do this at a generic place, where all such
> platform can mark their entries.
> 
> This patch adds a separate file to get this device created. Currently
> the compat list of platforms that we support is empty, and will be
> filled in as and when we move platforms to use it.
> 
> It always compiles as part of the kernel and so doesn't need a
> module-exit operation.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  drivers/cpufreq/Kconfig              | 11 +++++++++
>  drivers/cpufreq/Makefile             |  1 +
>  drivers/cpufreq/cpufreq-dt-platdev.c | 48 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 60 insertions(+)
>  create mode 100644 drivers/cpufreq/cpufreq-dt-platdev.c

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>



Best regards,

Krzysztof

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-exynos/exynos.c        | 25 -------------------------
 drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
 2 files changed, 5 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 1c47aee31e9c..757c6012989c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -224,29 +224,6 @@ static void __init exynos_init_irq(void)
 	exynos_map_pmu();
 }
 
-static const struct of_device_id exynos_cpufreq_matches[] = {
-	{ .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-	{ /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_cpufreq_matches, root);
-	if (!match) {
-		platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-		return;
-	}
-
-	platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
 static void __init exynos_dt_machine_init(void)
 {
 	/*
@@ -269,8 +246,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
 
-	exynos_cpufreq_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 18b81724ca0b..d7e62528ce06 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -20,6 +20,11 @@ struct cpufreq_dt_compat {
 };
 
 static struct cpufreq_dt_compat compat[] = {
+	{ "samsung,exynos3250",		NULL,		0 },
+	{ "samsung,exynos4210",		NULL,		0 },
+	{ "samsung,exynos4212",		NULL,		0 },
+	{ "samsung,exynos4412",		NULL,		0 },
+	{ "samsung,exynos5250",		NULL,		0 },
 };
 
 static int __init cpufreq_dt_platdev_init(void)
-- 
2.7.1.410.g6faf27b

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-exynos/exynos.c        | 25 -------------------------
 drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
 2 files changed, 5 insertions(+), 25 deletions(-)

diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 1c47aee31e9c..757c6012989c 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -224,29 +224,6 @@ static void __init exynos_init_irq(void)
 	exynos_map_pmu();
 }
 
-static const struct of_device_id exynos_cpufreq_matches[] = {
-	{ .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-	{ /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_cpufreq_matches, root);
-	if (!match) {
-		platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-		return;
-	}
-
-	platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
 static void __init exynos_dt_machine_init(void)
 {
 	/*
@@ -269,8 +246,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
 
-	exynos_cpufreq_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 18b81724ca0b..d7e62528ce06 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -20,6 +20,11 @@ struct cpufreq_dt_compat {
 };
 
 static struct cpufreq_dt_compat compat[] = {
+	{ "samsung,exynos3250",		NULL,		0 },
+	{ "samsung,exynos4210",		NULL,		0 },
+	{ "samsung,exynos4212",		NULL,		0 },
+	{ "samsung,exynos4412",		NULL,		0 },
+	{ "samsung,exynos5250",		NULL,		0 },
 };
 
 static int __init cpufreq_dt_platdev_init(void)
-- 
2.7.1.410.g6faf27b

Re: [PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Krzysztof Kozlowski]

On 24.03.2016 15:40, Viresh Kumar wrote:
> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> device now, reuse that and remove similar code from platform code.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
>  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
>  2 files changed, 5 insertions(+), 25 deletions(-)

Hi,

I got only 3rd patch (and no cover letter). I don't know what is the
background or what is your plan for this. I suppose you want to merge it
through cupfreq tree? Anyway could you cc-me on everything (or at least
cover letter)?

Best regards,
Krzysztof

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Krzysztof Kozlowski]

On 24.03.2016 15:40, Viresh Kumar wrote:
> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> device now, reuse that and remove similar code from platform code.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
>  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
>  2 files changed, 5 insertions(+), 25 deletions(-)

Hi,

I got only 3rd patch (and no cover letter). I don't know what is the
background or what is your plan for this. I suppose you want to merge it
through cupfreq tree? Anyway could you cc-me on everything (or at least
cover letter)?

Best regards,
Krzysztof

Re: [PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

On 29-03-16, 11:35, Krzysztof Kozlowski wrote:
> On 24.03.2016 15:40, Viresh Kumar wrote:
> > The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> > device now, reuse that and remove similar code from platform code.
> > 
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> >  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
> >  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
> >  2 files changed, 5 insertions(+), 25 deletions(-)
> 
> Hi,
> 
> I got only 3rd patch (and no cover letter). I don't know what is the
> background or what is your plan for this. I suppose you want to merge it
> through cupfreq tree? Anyway could you cc-me on everything (or at least
> cover letter)?

I bounced (mutt is great) all the other mails to you just now.

-- 
viresh

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

On 29-03-16, 11:35, Krzysztof Kozlowski wrote:
> On 24.03.2016 15:40, Viresh Kumar wrote:
> > The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> > device now, reuse that and remove similar code from platform code.
> > 
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> >  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
> >  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
> >  2 files changed, 5 insertions(+), 25 deletions(-)
> 
> Hi,
> 
> I got only 3rd patch (and no cover letter). I don't know what is the
> background or what is your plan for this. I suppose you want to merge it
> through cupfreq tree? Anyway could you cc-me on everything (or at least
> cover letter)?

I bounced (mutt is great) all the other mails to you just now.

-- 
viresh

Re: [PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Krzysztof Kozlowski]

On 24.03.2016 15:40, Viresh Kumar wrote:
> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> device now, reuse that and remove similar code from platform code.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
>  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
>  2 files changed, 5 insertions(+), 25 deletions(-)

Looks fine to me... except that it is a little bit outdated. Please
rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.

Best regards,

Krzysztof

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Krzysztof Kozlowski]

On 24.03.2016 15:40, Viresh Kumar wrote:
> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> device now, reuse that and remove similar code from platform code.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
>  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
>  2 files changed, 5 insertions(+), 25 deletions(-)

Looks fine to me... except that it is a little bit outdated. Please
rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.

Best regards,

Krzysztof

Re: [PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

On 29-03-16, 13:10, Krzysztof Kozlowski wrote:
> On 24.03.2016 15:40, Viresh Kumar wrote:
> > The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> > device now, reuse that and remove similar code from platform code.
> > 
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> >  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
> >  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
> >  2 files changed, 5 insertions(+), 25 deletions(-)
> 
> Looks fine to me... except that it is a little bit outdated. Please
> rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.

Yeah, I know. I already have the updated version.

-- 
viresh

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

On 29-03-16, 13:10, Krzysztof Kozlowski wrote:
> On 24.03.2016 15:40, Viresh Kumar wrote:
> > The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> > device now, reuse that and remove similar code from platform code.
> > 
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> >  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
> >  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
> >  2 files changed, 5 insertions(+), 25 deletions(-)
> 
> Looks fine to me... except that it is a little bit outdated. Please
> rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.

Yeah, I know. I already have the updated version.

-- 
viresh

Re: [PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

On 29-03-16, 09:48, Viresh Kumar wrote:
> On 29-03-16, 13:10, Krzysztof Kozlowski wrote:
> > On 24.03.2016 15:40, Viresh Kumar wrote:
> > > The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> > > device now, reuse that and remove similar code from platform code.
> > > 
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > >  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
> > >  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
> > >  2 files changed, 5 insertions(+), 25 deletions(-)
> > 
> > Looks fine to me... except that it is a little bit outdated. Please
> > rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.
> 
> Yeah, I know. I already have the updated version.

Here it is:

From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Thu, 24 Mar 2016 12:04:10 +0530
Subject: [PATCH] cpufreq: exynos: Use generic platdev driver

The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-exynos/exynos.c        | 29 -----------------------------
 drivers/cpufreq/cpufreq-dt-platdev.c |  9 +++++++++
 2 files changed, 9 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index bbf51a46f772..4d3b056fd786 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -213,33 +213,6 @@ static void __init exynos_init_irq(void)
 	exynos_map_pmu();
 }
 
-static const struct of_device_id exynos_cpufreq_matches[] = {
-	{ .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-#ifndef CONFIG_BL_SWITCHER
-	{ .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
-#endif
-	{ /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_cpufreq_matches, root);
-	if (!match) {
-		platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-		return;
-	}
-
-	platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
 static void __init exynos_dt_machine_init(void)
 {
 	/*
@@ -262,8 +235,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
 
-	exynos_cpufreq_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 18b81724ca0b..f85d1ab5d621 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -20,6 +20,15 @@ struct cpufreq_dt_compat {
 };
 
 static struct cpufreq_dt_compat compat[] = {
+	{ "samsung,exynos3250",		NULL,		0 },
+	{ "samsung,exynos4210",		NULL,		0 },
+	{ "samsung,exynos4212",		NULL,		0 },
+	{ "samsung,exynos4412",		NULL,		0 },
+	{ "samsung,exynos5250",		NULL,		0 },
+#ifndef CONFIG_BL_SWITCHER
+	{ "samsung,exynos5420",		NULL, 		0 },
+	{ "samsung,exynos5800",		NULL, 		0 },
+#endif
 };
 
 static int __init cpufreq_dt_platdev_init(void)


-- 
viresh

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Viresh Kumar]

On 29-03-16, 09:48, Viresh Kumar wrote:
> On 29-03-16, 13:10, Krzysztof Kozlowski wrote:
> > On 24.03.2016 15:40, Viresh Kumar wrote:
> > > The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> > > device now, reuse that and remove similar code from platform code.
> > > 
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > >  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
> > >  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
> > >  2 files changed, 5 insertions(+), 25 deletions(-)
> > 
> > Looks fine to me... except that it is a little bit outdated. Please
> > rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.
> 
> Yeah, I know. I already have the updated version.

Here it is:

From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Thu, 24 Mar 2016 12:04:10 +0530
Subject: [PATCH] cpufreq: exynos: Use generic platdev driver

The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
device now, reuse that and remove similar code from platform code.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-exynos/exynos.c        | 29 -----------------------------
 drivers/cpufreq/cpufreq-dt-platdev.c |  9 +++++++++
 2 files changed, 9 insertions(+), 29 deletions(-)

diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index bbf51a46f772..4d3b056fd786 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -213,33 +213,6 @@ static void __init exynos_init_irq(void)
 	exynos_map_pmu();
 }
 
-static const struct of_device_id exynos_cpufreq_matches[] = {
-	{ .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-#ifndef CONFIG_BL_SWITCHER
-	{ .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
-	{ .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
-#endif
-	{ /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const struct of_device_id *match;
-
-	match = of_match_node(exynos_cpufreq_matches, root);
-	if (!match) {
-		platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
-		return;
-	}
-
-	platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
 static void __init exynos_dt_machine_init(void)
 {
 	/*
@@ -262,8 +235,6 @@ static void __init exynos_dt_machine_init(void)
 	    of_machine_is_compatible("samsung,exynos5250"))
 		platform_device_register(&exynos_cpuidle);
 
-	exynos_cpufreq_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 18b81724ca0b..f85d1ab5d621 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -20,6 +20,15 @@ struct cpufreq_dt_compat {
 };
 
 static struct cpufreq_dt_compat compat[] = {
+	{ "samsung,exynos3250",		NULL,		0 },
+	{ "samsung,exynos4210",		NULL,		0 },
+	{ "samsung,exynos4212",		NULL,		0 },
+	{ "samsung,exynos4412",		NULL,		0 },
+	{ "samsung,exynos5250",		NULL,		0 },
+#ifndef CONFIG_BL_SWITCHER
+	{ "samsung,exynos5420",		NULL, 		0 },
+	{ "samsung,exynos5800",		NULL, 		0 },
+#endif
 };
 
 static int __init cpufreq_dt_platdev_init(void)


-- 
viresh

Re: [PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Krzysztof Kozlowski]

On 29.03.2016 13:19, Viresh Kumar wrote:
> On 29-03-16, 09:48, Viresh Kumar wrote:
>> On 29-03-16, 13:10, Krzysztof Kozlowski wrote:
>>> On 24.03.2016 15:40, Viresh Kumar wrote:
>>>> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
>>>> device now, reuse that and remove similar code from platform code.
>>>>
>>>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>>> ---
>>>>  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
>>>>  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
>>>>  2 files changed, 5 insertions(+), 25 deletions(-)
>>>
>>> Looks fine to me... except that it is a little bit outdated. Please
>>> rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.
>>
>> Yeah, I know. I already have the updated version.
> 
> Here it is:
> 
> From: Viresh Kumar <viresh.kumar@linaro.org>
> Date: Thu, 24 Mar 2016 12:04:10 +0530
> Subject: [PATCH] cpufreq: exynos: Use generic platdev driver
> 
> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> device now, reuse that and remove similar code from platform code.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/exynos.c        | 29 -----------------------------
>  drivers/cpufreq/cpufreq-dt-platdev.c |  9 +++++++++
>  2 files changed, 9 insertions(+), 29 deletions(-)

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>



Best regards,

Krzysztof

[PATCH 3/3] cpufreq: exynos: Use generic platdev driver

[Krzysztof Kozlowski]

On 29.03.2016 13:19, Viresh Kumar wrote:
> On 29-03-16, 09:48, Viresh Kumar wrote:
>> On 29-03-16, 13:10, Krzysztof Kozlowski wrote:
>>> On 24.03.2016 15:40, Viresh Kumar wrote:
>>>> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
>>>> device now, reuse that and remove similar code from platform code.
>>>>
>>>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>>>> ---
>>>>  arch/arm/mach-exynos/exynos.c        | 25 -------------------------
>>>>  drivers/cpufreq/cpufreq-dt-platdev.c |  5 +++++
>>>>  2 files changed, 5 insertions(+), 25 deletions(-)
>>>
>>> Looks fine to me... except that it is a little bit outdated. Please
>>> rebase on v4.6-rc1 because Bartlomiej added support for cpufreq @Exynos542x.
>>
>> Yeah, I know. I already have the updated version.
> 
> Here it is:
> 
> From: Viresh Kumar <viresh.kumar@linaro.org>
> Date: Thu, 24 Mar 2016 12:04:10 +0530
> Subject: [PATCH] cpufreq: exynos: Use generic platdev driver
> 
> The cpufreq-dt-platdev driver supports creation of cpufreq-dt platform
> device now, reuse that and remove similar code from platform code.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
>  arch/arm/mach-exynos/exynos.c        | 29 -----------------------------
>  drivers/cpufreq/cpufreq-dt-platdev.c |  9 +++++++++
>  2 files changed, 9 insertions(+), 29 deletions(-)

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>



Best regards,

Krzysztof

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Arnd Bergmann]

On Thursday 24 March 2016 12:10:27 Viresh Kumar wrote:
> Multiple platforms are using the generic cpufreq-dt driver now, and all
> of them are required to create a platform device with name "cpufreq-dt",
> in order to get the cpufreq-dt probed.
> 
> Many of them do it from platform code, others have special drivers just
> to do that.
> 
> It would be more sensible to do this at a generic place, where all such
> platform can mark their entries.
> 
> The first patch fixes an issue that becomes visible only after the
> second patch is applied. The second one creates a new driver to create
> platform-device based on current platform and the last one converts
> exynos platform to use this common infrastructure.
> 
> I will migrate rest of the platforms after this is accepted as the right
> way ahead.
> 
> @Arnd: Does this look sane? We can fix the arm64 (no platform code)
> issue with this now.
> 
> Viresh Kumar (3):
>   cpufreq: dt: Include types.h from cpufreq-dt.h
>   cpufreq: dt: Add generic platform-device creation support
>   cpufreq: exynos: Use generic platdev driver
> 

Hi Viresh,

Thanks for picking this up again!

I've tried implementing something similar when we last discussed it,
but didn't get far enough to test it our properly, and I had trouble
integrating some of the more complex platforms (omap, imx, sunxi)
that have lots of root compatible strings to fit in nicely.

I think having a lookup table as in your patch 2 makes sense here,
but I still would prefer not having a device at all. See the patch
below for how I think that can be avoided. Do you see any problems
with that?

Another idea I had was to make dt_cpufreq_init() a global function
that can simply be called by platforms that pass non-NULL platform
data today, avoiding the need for the pdata in a global location.

	Arnd

commit 63a47a8ac1568bb4331a624f3267f8ee8532d211
Author: Arnd Bergmann <arnd@arndb.de>
Date:   Mon Feb 8 16:51:54 2016 +0100

    cpufreq/berlin: move berlin platform device into cpufreq-dt.c
    
    It's completely senseless to create a platform device for cpufreq-dt,
    so this removes the platform and instead adds a minimal check into
    the cpufreq-dt.c code as the start of a platform whitelist.
    
    Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index 25d73870ccca..ac181c6797ee 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -18,11 +18,6 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 
-static void __init berlin_init_late(void)
-{
-	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
 static const char * const berlin_dt_compat[] = {
 	"marvell,berlin",
 	NULL,
@@ -30,7 +25,6 @@ static const char * const berlin_dt_compat[] = {
 
 DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
 	.dt_compat	= berlin_dt_compat,
-	.init_late	= berlin_init_late,
 	/*
 	 * with DT probing for L2CCs, berlin_init_machine can be removed.
 	 * Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index f951f911786e..b3817cc86597 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -356,7 +356,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 	.suspend = cpufreq_generic_suspend,
 };
 
-static int dt_cpufreq_probe(struct platform_device *pdev)
+static int 	(void *data)
 {
 	int ret;
 
@@ -371,15 +371,22 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
+	dt_cpufreq_driver.driver_data = data;
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);
 	if (ret)
-		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
+		pr_err("failed register driver: %d\n", ret);
 
 	return ret;
 }
 
+/* a minimal fake platform device for platforms that still call
+ * platform_device_create(). Don't use */
+static int dt_cpufreq_probe(struct platform_device *pdev)
+{
+	return dt_cpufreq_init(dev_get_platdata(&pdev->dev));
+}
+
 static int dt_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&dt_cpufreq_driver);
@@ -393,7 +400,24 @@ static struct platform_driver dt_cpufreq_platdrv = {
 	.probe		= dt_cpufreq_probe,
 	.remove		= dt_cpufreq_remove,
 };
-module_platform_driver(dt_cpufreq_platdrv);
+
+static int __init cpufreq_dt_init(void)
+{
+	if (of_machine_is_compatible("marvell,berlin"))
+		return dt_cpufreq_init(NULL);
+
+	return platform_driver_register(&dt_cpufreq_platdrv);
+}
+module_init(cpufreq_dt_init);
+
+static void cpufreq_dt_exit(void)
+{
+	if (dt_cpufreq_platdrv.driver.bus)
+		platform_driver_unregister(&dt_cpufreq_platdrv);
+	else
+		cpufreq_unregister_driver(&dt_cpufreq_driver);
+}
+module_exit(cpufreq_dt_exit);
 
 MODULE_ALIAS("platform:cpufreq-dt");
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Viresh Kumar]

On 24-03-16, 14:36, Arnd Bergmann wrote:
> I've tried implementing something similar when we last discussed it,
> but didn't get far enough to test it our properly, and I had trouble
> integrating some of the more complex platforms (omap, imx, sunxi)
> that have lots of root compatible strings to fit in nicely.
> 
> I think having a lookup table as in your patch 2 makes sense here,
> but I still would prefer not having a device at all. See the patch

We don't have any other option really. The platform-device logic was
added to make -EPROBE-DEFER work :)

> Another idea I had was to make dt_cpufreq_init() a global function
> that can simply be called by platforms that pass non-NULL platform
> data today, avoiding the need for the pdata in a global location.

I think its high time that we kill platform data if we don't care
about old DT compatibility with new kernel for mvebu platform, if it
hasn't gone into product already. We can do everything with opp-v2
now, and pdata doesn't do anything special.

> diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> index f951f911786e..b3817cc86597 100644
> --- a/drivers/cpufreq/cpufreq-dt.c
> +++ b/drivers/cpufreq/cpufreq-dt.c
> @@ -356,7 +356,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
>  	.suspend = cpufreq_generic_suspend,
>  };
>  
> -static int dt_cpufreq_probe(struct platform_device *pdev)
> +static int 	(void *data)

dt_cpufreq_init ? :)

>  {
>  	int ret;
>  
> @@ -371,15 +371,22 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
> +	dt_cpufreq_driver.driver_data = data;
>  
>  	ret = cpufreq_register_driver(&dt_cpufreq_driver);
>  	if (ret)
> -		dev_err(&pdev->dev, "failed register driver: %d\n", ret);
> +		pr_err("failed register driver: %d\n", ret);
>  
>  	return ret;
>  }
>  
> +/* a minimal fake platform device for platforms that still call
> + * platform_device_create(). Don't use */
> +static int dt_cpufreq_probe(struct platform_device *pdev)
> +{
> +	return dt_cpufreq_init(dev_get_platdata(&pdev->dev));
> +}
> +
>  static int dt_cpufreq_remove(struct platform_device *pdev)
>  {
>  	cpufreq_unregister_driver(&dt_cpufreq_driver);
> @@ -393,7 +400,24 @@ static struct platform_driver dt_cpufreq_platdrv = {
>  	.probe		= dt_cpufreq_probe,
>  	.remove		= dt_cpufreq_remove,
>  };
> -module_platform_driver(dt_cpufreq_platdrv);
> +
> +static int __init cpufreq_dt_init(void)
> +{
> +	if (of_machine_is_compatible("marvell,berlin"))
> +		return dt_cpufreq_init(NULL);
> +
> +	return platform_driver_register(&dt_cpufreq_platdrv);
> +}
> +module_init(cpufreq_dt_init);
> +
> +static void cpufreq_dt_exit(void)
> +{
> +	if (dt_cpufreq_platdrv.driver.bus)

I didn't like this as well :(

-- 
viresh

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Arnd Bergmann]

On Thursday 24 March 2016 19:36:00 Viresh Kumar wrote:
> On 24-03-16, 14:36, Arnd Bergmann wrote:
> > I've tried implementing something similar when we last discussed it,
> > but didn't get far enough to test it our properly, and I had trouble
> > integrating some of the more complex platforms (omap, imx, sunxi)
> > that have lots of root compatible strings to fit in nicely.
> > 
> > I think having a lookup table as in your patch 2 makes sense here,
> > but I still would prefer not having a device at all. See the patch
> 
> We don't have any other option really. The platform-device logic was
> added to make -EPROBE-DEFER work :)

Hmm, can you give an example where this is needed? I assume you are
thinking of some clock controller or regulator that gets initialized
after the cpufreq driver, right?

Are there any that are in loadable modules, rather than just later
in the init sequence for built-in drivers?

> > Another idea I had was to make dt_cpufreq_init() a global function
> > that can simply be called by platforms that pass non-NULL platform
> > data today, avoiding the need for the pdata in a global location.
> 
> I think its high time that we kill platform data if we don't care
> about old DT compatibility with new kernel for mvebu platform, if it
> hasn't gone into product already. We can do everything with opp-v2
> now, and pdata doesn't do anything special.

I think we do care about compatibility there, but there are clearly
other ways to handle the special case for opp-v1 if we want to.

> > diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
> > index f951f911786e..b3817cc86597 100644
> > --- a/drivers/cpufreq/cpufreq-dt.c
> > +++ b/drivers/cpufreq/cpufreq-dt.c
> > @@ -356,7 +356,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
> >  	.suspend = cpufreq_generic_suspend,
> >  };
> >  
> > -static int dt_cpufreq_probe(struct platform_device *pdev)
> > +static int 	(void *data)
> 
> dt_cpufreq_init ? :)

Yes, I must have removed the string from my email when copying the
text above.

	Arnd

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Viresh Kumar]

On 24-03-16, 15:16, Arnd Bergmann wrote:
> Hmm, can you give an example where this is needed?

I don't remember them, but I am quite sure that I have seen people
asking for that support again and again.

> I assume you are
> thinking of some clock controller or regulator that gets initialized
> after the cpufreq driver, right?

Yeah.

> Are there any that are in loadable modules, rather than just later
> in the init sequence for built-in drivers?

Maybe both, don't remember. Sorry.

Over that, independent of what the users are doing today, I think its
important to support defer probing for anyone that wants to use it.

> I think we do care about compatibility there, but there are clearly
> other ways to handle the special case for opp-v1 if we want to.

Okay, and what are those ? There is only one platform which has used
the pdata, mvebu.

-- 
viresh

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Viresh Kumar]

Ping !!

On 25-03-16, 10:11, Viresh Kumar wrote:
> On 24-03-16, 15:16, Arnd Bergmann wrote:
> > Hmm, can you give an example where this is needed?
> 
> I don't remember them, but I am quite sure that I have seen people
> asking for that support again and again.
> 
> > I assume you are
> > thinking of some clock controller or regulator that gets initialized
> > after the cpufreq driver, right?
> 
> Yeah.
> 
> > Are there any that are in loadable modules, rather than just later
> > in the init sequence for built-in drivers?
> 
> Maybe both, don't remember. Sorry.
> 
> Over that, independent of what the users are doing today, I think its
> important to support defer probing for anyone that wants to use it.
> 
> > I think we do care about compatibility there, but there are clearly
> > other ways to handle the special case for opp-v1 if we want to.
> 
> Okay, and what are those ? There is only one platform which has used
> the pdata, mvebu.

-- 
viresh

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Arnd Bergmann]

On Friday 25 March 2016 10:11:24 Viresh Kumar wrote:
> On 24-03-16, 15:16, Arnd Bergmann wrote:
> > Hmm, can you give an example where this is needed?
> 
> I don't remember them, but I am quite sure that I have seen people
> asking for that support again and again.
> 
> > I assume you are
> > thinking of some clock controller or regulator that gets initialized
> > after the cpufreq driver, right?
> 
> Yeah.
> 
> > Are there any that are in loadable modules, rather than just later
> > in the init sequence for built-in drivers?
> 
> Maybe both, don't remember. Sorry.
> 
> Over that, independent of what the users are doing today, I think its
> important to support defer probing for anyone that wants to use it.

Ok.

> > I think we do care about compatibility there, but there are clearly
> > other ways to handle the special case for opp-v1 if we want to.
> 
> Okay, and what are those ? There is only one platform which has used
> the pdata, mvebu.

The platform already calls dev_pm_opp_add(), so it directly interacts
with the cpufreq infrastructure. One way to do it would be to add
another function call to set the independent_clocks flag in a static
variable owned by that. Another way would be to have a separate
function call for doing dev_pm_opp_add() with independent clocks.
As far as I can tell, the two (dev_pm_opp_add and independent_clocks)
are already tightly coupled interfaces, so it makes sense to
combine them.

	Arnd

Re: [PATCH 0/3] cpufreq: dt: Create platform device from generic code

[Viresh Kumar]

On 29-03-16, 15:22, Arnd Bergmann wrote:
> The platform already calls dev_pm_opp_add(), so it directly interacts
> with the cpufreq infrastructure. One way to do it would be to add
> another function call to set the independent_clocks flag in a static
> variable owned by that. Another way would be to have a separate
> function call for doing dev_pm_opp_add() with independent clocks.
> As far as I can tell, the two (dev_pm_opp_add and independent_clocks)
> are already tightly coupled interfaces, so it makes sense to
> combine them.

That looks like a good idea.

Apart from that I hope you don't have any issues with rest of the V2
series.

-- 
viresh