* [PATCH 2/4] drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector
2024-03-28 10:27 [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01 Marek Vasut
@ 2024-03-28 10:27 ` Marek Vasut
2024-03-29 17:03 ` Jessica Zhang
2024-03-28 10:27 ` [PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing Marek Vasut
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2024-03-28 10:27 UTC (permalink / raw)
To: dri-devel
Cc: Marek Vasut, Conor Dooley, Daniel Vetter, David Airlie,
Jessica Zhang, Krzysztof Kozlowski, Maarten Lankhorst,
Maxime Ripard, Neil Armstrong, Rob Herring, Sam Ravnborg,
Thierry Reding, Thomas Zimmermann, devicetree
The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
add the missing bus_format. Add missing connector type and bus_flags
as well.
Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
capable of both RGB 18bit/24bit panel, the current configuration uses
18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.
Support for the 24bit mode would require another entry in panel-simple
with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
is out of scope of this fix.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03")
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/panel/panel-simple.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index d9ddef0e675a7..d4c30a86d15d6 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2618,6 +2618,9 @@ static const struct panel_desc innolux_g121x1_l03 = {
.unprepare = 200,
.disable = 400,
},
+ .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
};
static const struct display_timing innolux_g156hce_l01_timings = {
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/4] drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector
2024-03-28 10:27 ` [PATCH 2/4] drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector Marek Vasut
@ 2024-03-29 17:03 ` Jessica Zhang
0 siblings, 0 replies; 8+ messages in thread
From: Jessica Zhang @ 2024-03-29 17:03 UTC (permalink / raw)
To: Marek Vasut, dri-devel
Cc: Conor Dooley, Daniel Vetter, David Airlie, Krzysztof Kozlowski,
Maarten Lankhorst, Maxime Ripard, Neil Armstrong, Rob Herring,
Sam Ravnborg, Thierry Reding, Thomas Zimmermann, devicetree
On 3/28/2024 3:27 AM, Marek Vasut wrote:
> The .bpc = 6 implies .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ,
> add the missing bus_format. Add missing connector type and bus_flags
> as well.
>
> Documentation [1] 1.4 GENERAL SPECIFICATI0NS indicates this panel is
> capable of both RGB 18bit/24bit panel, the current configuration uses
> 18bit mode, .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG , .bpc = 6.
>
> Support for the 24bit mode would require another entry in panel-simple
> with .bus_format = MEDIA_BUS_FMT_RGB666_1X7X4_SPWG and .bpc = 8, which
> is out of scope of this fix.
>
> [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Hi Marek,
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Thanks,
Jessica Zhang
>
> Fixes: f8fa17ba812b ("drm/panel: simple: Add support for Innolux G121X1-L03")
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: devicetree@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> ---
> drivers/gpu/drm/panel/panel-simple.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index d9ddef0e675a7..d4c30a86d15d6 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2618,6 +2618,9 @@ static const struct panel_desc innolux_g121x1_l03 = {
> .unprepare = 200,
> .disable = 400,
> },
> + .bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH,
> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> };
>
> static const struct display_timing innolux_g156hce_l01_timings = {
> --
> 2.43.0
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing
2024-03-28 10:27 [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01 Marek Vasut
2024-03-28 10:27 ` [PATCH 2/4] drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector Marek Vasut
@ 2024-03-28 10:27 ` Marek Vasut
2024-03-29 17:03 ` Jessica Zhang
2024-03-28 10:27 ` [PATCH 4/4] drm/panel: simple: Add Innolux G121XCE-L01 LVDS display support Marek Vasut
2024-03-28 17:48 ` [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01 Conor Dooley
3 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2024-03-28 10:27 UTC (permalink / raw)
To: dri-devel
Cc: Marek Vasut, Conor Dooley, Daniel Vetter, David Airlie,
Jessica Zhang, Krzysztof Kozlowski, Maarten Lankhorst,
Maxime Ripard, Neil Armstrong, Rob Herring, Sam Ravnborg,
Thierry Reding, Thomas Zimmermann, devicetree
Use display_timing instead of drm_display_mode to define a range of
possible display timings supported by this panel. This makes the panel
support more flexible and improves compatibility. No functional change
is expected.
The settings are picked from documentation [1] section 6.1 INPUT SIGNAL
TIMING SPECIFICATIONS.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index d4c30a86d15d6..737c78b3b8a23 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2592,22 +2592,22 @@ static const struct panel_desc innolux_g121i1_l01 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
-static const struct drm_display_mode innolux_g121x1_l03_mode = {
- .clock = 65000,
- .hdisplay = 1024,
- .hsync_start = 1024 + 0,
- .hsync_end = 1024 + 1,
- .htotal = 1024 + 0 + 1 + 320,
- .vdisplay = 768,
- .vsync_start = 768 + 38,
- .vsync_end = 768 + 38 + 1,
- .vtotal = 768 + 38 + 1 + 0,
- .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+static const struct display_timing innolux_g121x1_l03_timings = {
+ .pixelclock = { 57500000, 64900000, 74400000 },
+ .hactive = { 1024, 1024, 1024 },
+ .hfront_porch = { 90, 140, 190 },
+ .hback_porch = { 90, 140, 190 },
+ .hsync_len = { 36, 40, 60 },
+ .vactive = { 768, 768, 768 },
+ .vfront_porch = { 2, 15, 30 },
+ .vback_porch = { 2, 15, 30 },
+ .vsync_len = { 2, 8, 20 },
+ .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
};
static const struct panel_desc innolux_g121x1_l03 = {
- .modes = &innolux_g121x1_l03_mode,
- .num_modes = 1,
+ .timings = &innolux_g121x1_l03_timings,
+ .num_timings = 1,
.bpc = 6,
.size = {
.width = 246,
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing
2024-03-28 10:27 ` [PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing Marek Vasut
@ 2024-03-29 17:03 ` Jessica Zhang
0 siblings, 0 replies; 8+ messages in thread
From: Jessica Zhang @ 2024-03-29 17:03 UTC (permalink / raw)
To: Marek Vasut, dri-devel
Cc: Conor Dooley, Daniel Vetter, David Airlie, Krzysztof Kozlowski,
Maarten Lankhorst, Maxime Ripard, Neil Armstrong, Rob Herring,
Sam Ravnborg, Thierry Reding, Thomas Zimmermann, devicetree
On 3/28/2024 3:27 AM, Marek Vasut wrote:
> Use display_timing instead of drm_display_mode to define a range of
> possible display timings supported by this panel. This makes the panel
> support more flexible and improves compatibility. No functional change
> is expected.
>
> The settings are picked from documentation [1] section 6.1 INPUT SIGNAL
> TIMING SPECIFICATIONS.
>
> [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
Hi Marek,
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Thanks,
Jessica Zhang
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: devicetree@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> ---
> drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++-------------
> 1 file changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index d4c30a86d15d6..737c78b3b8a23 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2592,22 +2592,22 @@ static const struct panel_desc innolux_g121i1_l01 = {
> .connector_type = DRM_MODE_CONNECTOR_LVDS,
> };
>
> -static const struct drm_display_mode innolux_g121x1_l03_mode = {
> - .clock = 65000,
> - .hdisplay = 1024,
> - .hsync_start = 1024 + 0,
> - .hsync_end = 1024 + 1,
> - .htotal = 1024 + 0 + 1 + 320,
> - .vdisplay = 768,
> - .vsync_start = 768 + 38,
> - .vsync_end = 768 + 38 + 1,
> - .vtotal = 768 + 38 + 1 + 0,
> - .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +static const struct display_timing innolux_g121x1_l03_timings = {
> + .pixelclock = { 57500000, 64900000, 74400000 },
> + .hactive = { 1024, 1024, 1024 },
> + .hfront_porch = { 90, 140, 190 },
> + .hback_porch = { 90, 140, 190 },
> + .hsync_len = { 36, 40, 60 },
> + .vactive = { 768, 768, 768 },
> + .vfront_porch = { 2, 15, 30 },
> + .vback_porch = { 2, 15, 30 },
> + .vsync_len = { 2, 8, 20 },
> + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW,
> };
>
> static const struct panel_desc innolux_g121x1_l03 = {
> - .modes = &innolux_g121x1_l03_mode,
> - .num_modes = 1,
> + .timings = &innolux_g121x1_l03_timings,
> + .num_timings = 1,
> .bpc = 6,
> .size = {
> .width = 246,
> --
> 2.43.0
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 4/4] drm/panel: simple: Add Innolux G121XCE-L01 LVDS display support
2024-03-28 10:27 [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01 Marek Vasut
2024-03-28 10:27 ` [PATCH 2/4] drm/panel: simple: Add missing Innolux G121X1-L03 format, flags, connector Marek Vasut
2024-03-28 10:27 ` [PATCH 3/4] drm/panel: simple: Convert Innolux G121X1-L03 to display_timing Marek Vasut
@ 2024-03-28 10:27 ` Marek Vasut
2024-03-29 17:04 ` Jessica Zhang
2024-03-28 17:48 ` [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01 Conor Dooley
3 siblings, 1 reply; 8+ messages in thread
From: Marek Vasut @ 2024-03-28 10:27 UTC (permalink / raw)
To: dri-devel
Cc: Marek Vasut, Conor Dooley, Daniel Vetter, David Airlie,
Jessica Zhang, Krzysztof Kozlowski, Maarten Lankhorst,
Maxime Ripard, Neil Armstrong, Rob Herring, Sam Ravnborg,
Thierry Reding, Thomas Zimmermann, devicetree
G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of
a TFT LCD panel, a driver circuit, and LED backlight system. The screen
format is intended to support the 4:3, 1024(H) x 768(V) screen and either
262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit.
All input signals are LVDS interface compatible.
Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are
effectively identical panels, use the former as RGB 6-bits variant and
add the later as RGB 8-bits variant.
[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
[2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
drivers/gpu/drm/panel/panel-simple.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 737c78b3b8a23..5acc9f2941909 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2623,6 +2623,24 @@ static const struct panel_desc innolux_g121x1_l03 = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
+static const struct panel_desc innolux_g121xce_l01 = {
+ .timings = &innolux_g121x1_l03_timings,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 246,
+ .height = 185,
+ },
+ .delay = {
+ .enable = 200,
+ .unprepare = 200,
+ .disable = 400,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+ .connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
static const struct display_timing innolux_g156hce_l01_timings = {
.pixelclock = { 120000000, 141860000, 150000000 },
.hactive = { 1920, 1920, 1920 },
@@ -4596,6 +4614,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,g121x1-l03",
.data = &innolux_g121x1_l03,
+ }, {
+ .compatible = "innolux,g121xce-l01",
+ .data = &innolux_g121xce_l01,
}, {
.compatible = "innolux,g156hce-l01",
.data = &innolux_g156hce_l01,
--
2.43.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 4/4] drm/panel: simple: Add Innolux G121XCE-L01 LVDS display support
2024-03-28 10:27 ` [PATCH 4/4] drm/panel: simple: Add Innolux G121XCE-L01 LVDS display support Marek Vasut
@ 2024-03-29 17:04 ` Jessica Zhang
0 siblings, 0 replies; 8+ messages in thread
From: Jessica Zhang @ 2024-03-29 17:04 UTC (permalink / raw)
To: Marek Vasut, dri-devel
Cc: Conor Dooley, Daniel Vetter, David Airlie, Krzysztof Kozlowski,
Maarten Lankhorst, Maxime Ripard, Neil Armstrong, Rob Herring,
Sam Ravnborg, Thierry Reding, Thomas Zimmermann, devicetree
On 3/28/2024 3:27 AM, Marek Vasut wrote:
> G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of
> a TFT LCD panel, a driver circuit, and LED backlight system. The screen
> format is intended to support the 4:3, 1024(H) x 768(V) screen and either
> 262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit.
> All input signals are LVDS interface compatible.
>
> Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are
> effectively identical panels, use the former as RGB 6-bits variant and
> add the later as RGB 8-bits variant.
>
> [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
> [2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf
Hi Marek,
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Thanks,
Jessica Zhang
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: devicetree@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> ---
> drivers/gpu/drm/panel/panel-simple.c | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 737c78b3b8a23..5acc9f2941909 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -2623,6 +2623,24 @@ static const struct panel_desc innolux_g121x1_l03 = {
> .connector_type = DRM_MODE_CONNECTOR_LVDS,
> };
>
> +static const struct panel_desc innolux_g121xce_l01 = {
> + .timings = &innolux_g121x1_l03_timings,
> + .num_timings = 1,
> + .bpc = 8,
> + .size = {
> + .width = 246,
> + .height = 185,
> + },
> + .delay = {
> + .enable = 200,
> + .unprepare = 200,
> + .disable = 400,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH,
> + .connector_type = DRM_MODE_CONNECTOR_LVDS,
> +};
> +
> static const struct display_timing innolux_g156hce_l01_timings = {
> .pixelclock = { 120000000, 141860000, 150000000 },
> .hactive = { 1920, 1920, 1920 },
> @@ -4596,6 +4614,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "innolux,g121x1-l03",
> .data = &innolux_g121x1_l03,
> + }, {
> + .compatible = "innolux,g121xce-l01",
> + .data = &innolux_g121xce_l01,
> }, {
> .compatible = "innolux,g156hce-l01",
> .data = &innolux_g156hce_l01,
> --
> 2.43.0
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01
2024-03-28 10:27 [PATCH 1/4] dt-bindings: display: simple: Document support for Innolux G121XCE-L01 Marek Vasut
` (2 preceding siblings ...)
2024-03-28 10:27 ` [PATCH 4/4] drm/panel: simple: Add Innolux G121XCE-L01 LVDS display support Marek Vasut
@ 2024-03-28 17:48 ` Conor Dooley
3 siblings, 0 replies; 8+ messages in thread
From: Conor Dooley @ 2024-03-28 17:48 UTC (permalink / raw)
To: Marek Vasut
Cc: dri-devel, Conor Dooley, Daniel Vetter, David Airlie,
Jessica Zhang, Krzysztof Kozlowski, Maarten Lankhorst,
Maxime Ripard, Neil Armstrong, Rob Herring, Sam Ravnborg,
Thierry Reding, Thomas Zimmermann, devicetree
[-- Attachment #1: Type: text/plain, Size: 2609 bytes --]
On Thu, Mar 28, 2024 at 11:27:35AM +0100, Marek Vasut wrote:
> Document support for Innolux CheMei 12" G121XCE-L01 XGA LVDS display.
>
> G121XCE-L01 is a Color Active Matrix Liquid Crystal Display composed of
> a TFT LCD panel, a driver circuit, and LED backlight system. The screen
> format is intended to support the 4:3, 1024(H) x 768(V) screen and either
> 262k/16.7M colors (RGB 6-bits or 8-bits) with LED backlight driver circuit.
> All input signals are LVDS interface compatible.
>
> Documentation [1] and [2] indicate that G121X1-L03 and G121XCE-L01 are
> effectively identical panels, use the former as RGB 6-bits variant and
> document the later as RGB 8-bits variant.
>
> [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121X1-L03_Datasheet.pdf
> [2] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G121XCE-L01_Datasheet.pdf
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Thanks,
Conor.
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: David Airlie <airlied@gmail.com>
> Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Thomas Zimmermann <tzimmermann@suse.de>
> Cc: devicetree@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> ---
> .../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index e0f6aa9a025c4..931d98836e121 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -190,6 +190,8 @@ properties:
> - innolux,g121i1-l01
> # Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
> - innolux,g121x1-l03
> + # Innolux Corporation 12.1" G121XCE-L01 XGA (1024x768) TFT LCD panel
> + - innolux,g121xce-l01
> # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
> - innolux,n116bca-ea1
> # Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
> --
> 2.43.0
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread