All of lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH 1/1] configs/stm32mp157c_dk2_trusted_defconfig: new platform
@ 2020-09-27  6:16 Shlomi Vaknin
  2020-09-27  9:57 ` Thomas Petazzoni
  2020-10-02 14:24 ` [Buildroot] [PATCH v2 1/4] boot/uboot: add stm32 binary format Shlomi Vaknin
  0 siblings, 2 replies; 12+ messages in thread
From: Shlomi Vaknin @ 2020-09-27  6:16 UTC (permalink / raw)
  To: buildroot

Adding support for trusted configuration for stm32mp157c-dk2.
In addtion, the following changes made to the original stm32mp157c_dk2_defconfig:
1. Enable gadget support and wifi support in `linux.config`.
2. Create a new dts file that contains the bindings for the wifi module. This was
   copied from the stm32 kernel fork.
3. A txt file for the wifi firmware. This was copied from the yocto bsp layer of st.

Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
---
 .../common/stm32mp157-trusted/genimage.cfg    |  23 +++
 .../stm32mp157c-dk2-trusted/linux.config      | 181 ++++++++++++++++++
 .../overlay/boot/extlinux/extlinux.conf       |   4 +
 .../brcmfmac43430-sdio.st,stm32mp157c-dk2.txt |  59 ++++++
 .../stm32mp157c-dk2-trusted/readme.txt        |  38 ++++
 .../stm32mp157c-dk2-wifi.dts                  |  32 ++++
 configs/stm32mp157c_dk2_trusted_defconfig     |  40 ++++
 7 files changed, 377 insertions(+)
 create mode 100644 board/stmicroelectronics/common/stm32mp157-trusted/genimage.cfg
 create mode 100644 board/stmicroelectronics/stm32mp157c-dk2-trusted/linux.config
 create mode 100644 board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/boot/extlinux/extlinux.conf
 create mode 100644 board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/lib/firmware/brcm/brcmfmac43430-sdio.st,stm32mp157c-dk2.txt
 create mode 100644 board/stmicroelectronics/stm32mp157c-dk2-trusted/readme.txt
 create mode 100644 board/stmicroelectronics/stm32mp157c-dk2-trusted/stm32mp157c-dk2-wifi.dts
 create mode 100644 configs/stm32mp157c_dk2_trusted_defconfig

diff --git a/board/stmicroelectronics/common/stm32mp157-trusted/genimage.cfg b/board/stmicroelectronics/common/stm32mp157-trusted/genimage.cfg
new file mode 100644
index 0000000000..3b709f756d
--- /dev/null
+++ b/board/stmicroelectronics/common/stm32mp157-trusted/genimage.cfg
@@ -0,0 +1,23 @@
+image sdcard.img {
+	hdimage {
+		gpt = "true"
+	}
+
+	partition fsbl1 {
+		image = "tf-a-stm32mp157c-dk2.stm32"
+	}
+
+	partition fsbl2 {
+		image = "tf-a-stm32mp157c-dk2.stm32"
+	}
+
+	partition ssbl {
+		image = "u-boot.stm32"
+	}
+
+	partition rootfs {
+		image = "rootfs.ext4"
+		partition-type = 0x83
+		bootable = "yes"
+	}
+}
diff --git a/board/stmicroelectronics/stm32mp157c-dk2-trusted/linux.config b/board/stmicroelectronics/stm32mp157c-dk2-trusted/linux.config
new file mode 100644
index 0000000000..5f53e48236
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp157c-dk2-trusted/linux.config
@@ -0,0 +1,181 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_SMP=y
+CONFIG_MCPM=y
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CAN=y
+CONFIG_CAN_M_CAN=y
+CONFIG_CFG80211=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_KS8851=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_BRCMFMAC=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_STPMIC1_ONKEY=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_STM32F7=y
+CONFIG_SPI=y
+CONFIG_SPI_STM32=y
+CONFIG_SPI_STM32_QSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_STMFX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_WATCHDOG=y
+CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_MFD_STM32_LPTIMER=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_DRM_SII902X=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_ISP1760_HOST_ROLE=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CONFIGFS_ACM=y
+CONFIG_USB_CONFIGFS_ECM=y
+CONFIG_USB_CONFIGFS_MASS_STORAGE=y
+CONFIG_TYPEC=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_STM32_IPCC=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_RPROC=y
+CONFIG_RPMSG_VIRTIO=y
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_SD_ADC_MODULATOR=y
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_DFSDM_ADC=y
+CONFIG_STM32_DAC=y
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_STM32=y
+CONFIG_PWM_STM32_LP=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_NVMEM_STM32_ROMEM=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=128
+CONFIG_PRINTK_TIME=y
diff --git a/board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/boot/extlinux/extlinux.conf b/board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/boot/extlinux/extlinux.conf
new file mode 100644
index 0000000000..a6595971a8
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,4 @@
+label stm32mp157c-dk2-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp157c-dk2-wifi.dtb
+  append root=/dev/mmcblk0p4 rootwait
diff --git a/board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/lib/firmware/brcm/brcmfmac43430-sdio.st,stm32mp157c-dk2.txt b/board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/lib/firmware/brcm/brcmfmac43430-sdio.st,stm32mp157c-dk2.txt
new file mode 100644
index 0000000000..b36de8837f
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/lib/firmware/brcm/brcmfmac43430-sdio.st,stm32mp157c-dk2.txt
@@ -0,0 +1,59 @@
+# NVRAM file for BCM943430WLSELG
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1202
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+#xtalfreq=19200
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=32
+papdepsoffset=-36
+papdendidx=61
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3
diff --git a/board/stmicroelectronics/stm32mp157c-dk2-trusted/readme.txt b/board/stmicroelectronics/stm32mp157c-dk2-trusted/readme.txt
new file mode 100644
index 0000000000..dabf2f018a
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp157c-dk2-trusted/readme.txt
@@ -0,0 +1,38 @@
+STM32MP157C Discovery Kit v2
+
+Intro
+=====
+
+This configuration supports the STM32MP157C Discovery Kit 2 (DK2)
+platform:
+
+  https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
+
+How to build
+============
+
+ $ make stm32mp157c_dk2_trusted_defconfig
+ $ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called
+"sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Boot the board
+==============
+
+ (1) Insert the microSD card in connector CN15
+
+ (2) Plug a micro-USB cable in connector CN11 and run your serial
+     communication program on /dev/ttyACM0.
+
+ (3) Plug a USB-C cable in CN6 to power-up the board.
+
+ (4) The system will start, with the console on UART, but also visible
+     on the screen.
diff --git a/board/stmicroelectronics/stm32mp157c-dk2-trusted/stm32mp157c-dk2-wifi.dts b/board/stmicroelectronics/stm32mp157c-dk2-trusted/stm32mp157c-dk2-wifi.dts
new file mode 100644
index 0000000000..89747d2b5f
--- /dev/null
+++ b/board/stmicroelectronics/stm32mp157c-dk2-trusted/stm32mp157c-dk2-wifi.dts
@@ -0,0 +1,32 @@
+/dts-v1/;
+
+#include "stm32mp157c-dk2.dts"
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* Wifi */
+&sdmmc2 {
+	arm,primecell-periphid = <0x10153180>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: bcrmf at 1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/configs/stm32mp157c_dk2_trusted_defconfig b/configs/stm32mp157c_dk2_trusted_defconfig
new file mode 100644
index 0000000000..e5cf8909da
--- /dev/null
+++ b/configs/stm32mp157c_dk2_trusted_defconfig
@@ -0,0 +1,40 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_7=y
+BR2_ROOTFS_OVERLAY="board/stmicroelectronics/stm32mp157c-dk2-trusted/overlay/"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/stmicroelectronics/common/stm32mp157-trusted/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.7.10"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/stmicroelectronics/stm32mp157c-dk2-trusted/linux.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="stm32mp157c-dk2"
+BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/stmicroelectronics/stm32mp157c-dk2-trusted/stm32mp157c-dk2-wifi.dts"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_PACKAGE_LINUX_FIRMWARE=y
+BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y
+BR2_PACKAGE_WIRELESS_REGDB=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="stm32mp1"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="STM32MP_SDMMC=1 AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157c-dk2.dtb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="*.stm32"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="stm32mp15_trusted"
+BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/stmicroelectronics/stm32mp157c-dk2/uboot-fragment.config"
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.stm32"
+BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS="DEVICE_TREE=stm32mp157c-dk2"
+BR2_PACKAGE_HOST_GENIMAGE=y
-- 
2.25.1

^ permalink raw reply related	[flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-10-04 11:59 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-27  6:16 [Buildroot] [PATCH 1/1] configs/stm32mp157c_dk2_trusted_defconfig: new platform Shlomi Vaknin
2020-09-27  9:57 ` Thomas Petazzoni
2020-09-27 13:43   ` Bartosz Bilas
2020-10-02 14:24 ` [Buildroot] [PATCH v2 1/4] boot/uboot: add stm32 binary format Shlomi Vaknin
2020-10-02 14:24   ` [Buildroot] [PATCH v2 2/4] configs/stm32mp157*: use trusted configuration Shlomi Vaknin
2020-10-02 19:24     ` Bartosz Bilas
2020-10-02 14:24   ` [Buildroot] [PATCH v2 3/4] configs/stm32mp157*: bump kernel version Shlomi Vaknin
2020-10-02 19:26     ` Bartosz Bilas
     [not found]       ` <CALxJ29RWRdx3RCJW1tx7P_J7ynow=X97OWVvZSZXRTvC_2KKSg@mail.gmail.com>
2020-10-03  9:36         ` Bartosz Bilas
2020-10-02 14:24   ` [Buildroot] [PATCH v2 4/4] configs/stm32mp157c-dk2: add support for wifi Shlomi Vaknin
2020-10-02 20:13     ` Bartosz Bilas
2020-10-04 11:59   ` [Buildroot] [PATCH v2 1/4] boot/uboot: add stm32 binary format Bartosz Bilas

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.