[PATCH 00/10] arm64: meson-gx: misc fixes

[PATCH 00/10] arm64: meson-gx: misc fixes

[Neil Armstrong]

This patchset :
- Fixes GPIO key DT on Khadas VIM2 board
- Fixes regulator naming on Vega S95 board
- Enable SARADC on Wetek and Vega S95 boards
- Enable/Fix Bluetooth on VIM2, Wetek and Vega S95 boards
- Enable CEC & HDMI on Vega S95 board
- Adds ethernet PHY interrupt on Vega S95 board

Christian Hewitt (4):
  arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node
  arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support
  arm64: dts: meson-gxbb-wetek: enable SARADC
  arm64: dts: meson-gxbb-wetek: enable bluetooth

Neil Armstrong (6):
  arm64: dts: meson-gxbb-vega-s95: fix regulators
  arm64: dts: meson-gxbb-vega-s95: add HDMI nodes
  arm64: dts: meson-gxbb-vega-s95: enable CEC
  arm64: dts: meson-gxbb-vega-s95: enable SARADC
  arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support
  arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 93 ++++++++++++++++---
 .../boot/dts/amlogic/meson-gxbb-wetek.dtsi    | 25 +++++
 .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 13 ++-
 3 files changed, 112 insertions(+), 19 deletions(-)

-- 
2.21.0

[PATCH 00/10] arm64: meson-gx: misc fixes

[Neil Armstrong]

This patchset :
- Fixes GPIO key DT on Khadas VIM2 board
- Fixes regulator naming on Vega S95 board
- Enable SARADC on Wetek and Vega S95 boards
- Enable/Fix Bluetooth on VIM2, Wetek and Vega S95 boards
- Enable CEC & HDMI on Vega S95 board
- Adds ethernet PHY interrupt on Vega S95 board

Christian Hewitt (4):
  arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node
  arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support
  arm64: dts: meson-gxbb-wetek: enable SARADC
  arm64: dts: meson-gxbb-wetek: enable bluetooth

Neil Armstrong (6):
  arm64: dts: meson-gxbb-vega-s95: fix regulators
  arm64: dts: meson-gxbb-vega-s95: add HDMI nodes
  arm64: dts: meson-gxbb-vega-s95: enable CEC
  arm64: dts: meson-gxbb-vega-s95: enable SARADC
  arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support
  arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 93 ++++++++++++++++---
 .../boot/dts/amlogic/meson-gxbb-wetek.dtsi    | 25 +++++
 .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 13 ++-
 3 files changed, 112 insertions(+), 19 deletions(-)

-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 00/10] arm64: meson-gx: misc fixes

[Neil Armstrong]

This patchset :
- Fixes GPIO key DT on Khadas VIM2 board
- Fixes regulator naming on Vega S95 board
- Enable SARADC on Wetek and Vega S95 boards
- Enable/Fix Bluetooth on VIM2, Wetek and Vega S95 boards
- Enable CEC & HDMI on Vega S95 board
- Adds ethernet PHY interrupt on Vega S95 board

Christian Hewitt (4):
  arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node
  arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support
  arm64: dts: meson-gxbb-wetek: enable SARADC
  arm64: dts: meson-gxbb-wetek: enable bluetooth

Neil Armstrong (6):
  arm64: dts: meson-gxbb-vega-s95: fix regulators
  arm64: dts: meson-gxbb-vega-s95: add HDMI nodes
  arm64: dts: meson-gxbb-vega-s95: enable CEC
  arm64: dts: meson-gxbb-vega-s95: enable SARADC
  arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support
  arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 93 ++++++++++++++++---
 .../boot/dts/amlogic/meson-gxbb-wetek.dtsi    | 25 +++++
 .../dts/amlogic/meson-gxm-khadas-vim2.dts     | 13 ++-
 3 files changed, 112 insertions(+), 19 deletions(-)

-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

Fix DTC warnings:

meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
   /gpio-keys-polled: unnecessary #address-cells/#size-cells
	without "ranges" or child "reg" property

Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index c5f3f90a42ae..25079501f2bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -63,11 +63,9 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		power-button {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-- 
2.21.0

[PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

Fix DTC warnings:

meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
   /gpio-keys-polled: unnecessary #address-cells/#size-cells
	without "ranges" or child "reg" property

Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index c5f3f90a42ae..25079501f2bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -63,11 +63,9 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		power-button {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

Fix DTC warnings:

meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
   /gpio-keys-polled: unnecessary #address-cells/#size-cells
	without "ranges" or child "reg" property

Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index c5f3f90a42ae..25079501f2bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -63,11 +63,9 @@
 
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <100>;
 
-		button@0 {
+		power-button {
 			label = "power";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

- Remove serial1 alias
- Add support for uart_A rts/cts
- Add bluetooth uart_A subnode qith shutdown gpio

Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 25079501f2bb..ff4f0780824d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -18,7 +18,6 @@
 
 	aliases {
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		serial2 = &uart_AO_B;
 	};
 
@@ -403,8 +402,14 @@
 /* This one is connected to the Bluetooth module */
 &uart_A {
 	status = "okay";
-	pinctrl-0 = <&uart_a_pins>;
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-- 
2.21.0

[PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

- Remove serial1 alias
- Add support for uart_A rts/cts
- Add bluetooth uart_A subnode qith shutdown gpio

Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 25079501f2bb..ff4f0780824d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -18,7 +18,6 @@
 
 	aliases {
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		serial2 = &uart_AO_B;
 	};
 
@@ -403,8 +402,14 @@
 /* This one is connected to the Bluetooth module */
 &uart_A {
 	status = "okay";
-	pinctrl-0 = <&uart_a_pins>;
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

- Remove serial1 alias
- Add support for uart_A rts/cts
- Add bluetooth uart_A subnode qith shutdown gpio

Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
index 25079501f2bb..ff4f0780824d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@@ -18,7 +18,6 @@
 
 	aliases {
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		serial2 = &uart_AO_B;
 	};
 
@@ -403,8 +402,14 @@
 /* This one is connected to the Bluetooth module */
 &uart_A {
 	status = "okay";
-	pinctrl-0 = <&uart_a_pins>;
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

Enable SARADC on Wetek Boards.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index b0d74ab619b0..45e306da2154 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -59,6 +59,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -172,6 +179,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
2.21.0

[PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

Enable SARADC on Wetek Boards.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index b0d74ab619b0..45e306da2154 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -59,6 +59,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -172,6 +179,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

Enable SARADC on Wetek Boards.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index b0d74ab619b0..45e306da2154 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -59,6 +59,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -172,6 +179,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 04/10] arm64: dts: meson-gxbb-wetek: enable bluetooth

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

This enables Bluetooth support for the following models:

AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
AP6330 in the WeTek Play 2 - BCM4330B1.hcd

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 45e306da2154..9ef6858779c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -249,6 +249,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
-- 
2.21.0

[PATCH 04/10] arm64: dts: meson-gxbb-wetek: enable bluetooth

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

This enables Bluetooth support for the following models:

AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
AP6330 in the WeTek Play 2 - BCM4330B1.hcd

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 45e306da2154..9ef6858779c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -249,6 +249,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 04/10] arm64: dts: meson-gxbb-wetek: enable bluetooth

[Neil Armstrong]

From: Christian Hewitt <christianshewitt@gmail.com>

This enables Bluetooth support for the following models:

AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
AP6330 in the WeTek Play 2 - BCM4330B1.hcd

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
index 45e306da2154..9ef6858779c1 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@@ -249,6 +249,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators

[Neil Armstrong]

Align the regulator names with other GXBB SoCS for upcoming
SARADC support and SDIO/SDCard fixes.
Also fix how regulators are passed to MMC controllers & USB.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 34 ++++++++++++-------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 623bcb6594b1..760730d4e87b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -28,10 +28,10 @@
 		};
 	};
 
-	usb_vbus: regulator-usb0-vbus {
+	usb_pwr: regulator-usb-pwrs {
 		compatible = "regulator-fixed";
 
-		regulator-name = "USB0_VBUS";
+		regulator-name = "USB_PWR";
 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -40,18 +40,25 @@
 		enable-active-high;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
@@ -133,8 +140,8 @@
 
 	mmc-pwrseq = <&sdio_pwrseq>;
 
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_1v8>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 
 	brcmf: wifi@1 {
 		reg = <1>;
@@ -156,7 +163,8 @@
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
-	vmmc-supply = <&vcc_3v3>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
 };
 
 /* eMMC */
@@ -176,7 +184,7 @@
 
 	mmc-pwrseq = <&emmc_pwrseq>;
 	vmmc-supply = <&vcc_3v3>;
-	vmmcq-sumpply = <&vcc_1v8>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
 &uart_AO {
@@ -187,7 +195,7 @@
 
 &usb0_phy {
 	status = "okay";
-	phy-supply = <&usb_vbus>;
+	phy-supply = <&usb_pwr>;
 };
 
 &usb1_phy {
-- 
2.21.0

[PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators

[Neil Armstrong]

Align the regulator names with other GXBB SoCS for upcoming
SARADC support and SDIO/SDCard fixes.
Also fix how regulators are passed to MMC controllers & USB.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 34 ++++++++++++-------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 623bcb6594b1..760730d4e87b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -28,10 +28,10 @@
 		};
 	};
 
-	usb_vbus: regulator-usb0-vbus {
+	usb_pwr: regulator-usb-pwrs {
 		compatible = "regulator-fixed";
 
-		regulator-name = "USB0_VBUS";
+		regulator-name = "USB_PWR";
 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -40,18 +40,25 @@
 		enable-active-high;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
@@ -133,8 +140,8 @@
 
 	mmc-pwrseq = <&sdio_pwrseq>;
 
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_1v8>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 
 	brcmf: wifi@1 {
 		reg = <1>;
@@ -156,7 +163,8 @@
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
-	vmmc-supply = <&vcc_3v3>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
 };
 
 /* eMMC */
@@ -176,7 +184,7 @@
 
 	mmc-pwrseq = <&emmc_pwrseq>;
 	vmmc-supply = <&vcc_3v3>;
-	vmmcq-sumpply = <&vcc_1v8>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
 &uart_AO {
@@ -187,7 +195,7 @@
 
 &usb0_phy {
 	status = "okay";
-	phy-supply = <&usb_vbus>;
+	phy-supply = <&usb_pwr>;
 };
 
 &usb1_phy {
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators

[Neil Armstrong]

Align the regulator names with other GXBB SoCS for upcoming
SARADC support and SDIO/SDCard fixes.
Also fix how regulators are passed to MMC controllers & USB.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 34 ++++++++++++-------
 1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 623bcb6594b1..760730d4e87b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -28,10 +28,10 @@
 		};
 	};
 
-	usb_vbus: regulator-usb0-vbus {
+	usb_pwr: regulator-usb-pwrs {
 		compatible = "regulator-fixed";
 
-		regulator-name = "USB0_VBUS";
+		regulator-name = "USB_PWR";
 
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -40,18 +40,25 @@
 		enable-active-high;
 	};
 
-	vcc_3v3: regulator-vcc_3v3 {
+	vddio_boot: regulator-vddio_boot {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_3V3";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
 
-	vcc_1v8: regulator-vcc_1v8 {
+	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
-		regulator-name = "VCC_1V8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
 	emmc_pwrseq: emmc-pwrseq {
@@ -133,8 +140,8 @@
 
 	mmc-pwrseq = <&sdio_pwrseq>;
 
-	vmmc-supply = <&vcc_3v3>;
-	vqmmc-supply = <&vcc_1v8>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
 
 	brcmf: wifi@1 {
 		reg = <1>;
@@ -156,7 +163,8 @@
 
 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
 
-	vmmc-supply = <&vcc_3v3>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
 };
 
 /* eMMC */
@@ -176,7 +184,7 @@
 
 	mmc-pwrseq = <&emmc_pwrseq>;
 	vmmc-supply = <&vcc_3v3>;
-	vmmcq-sumpply = <&vcc_1v8>;
+	vqmmc-supply = <&vddio_boot>;
 };
 
 &uart_AO {
@@ -187,7 +195,7 @@
 
 &usb0_phy {
 	status = "okay";
-	phy-supply = <&usb_vbus>;
+	phy-supply = <&usb_pwr>;
 };
 
 &usb1_phy {
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 06/10] arm64: dts: meson-gxbb-vega-s95: add HDMI nodes

[Neil Armstrong]

Add HDMI nodes to support graphics on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 760730d4e87b..6738b2aac9a0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -73,6 +73,17 @@
 		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
@@ -108,6 +119,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
-- 
2.21.0

[PATCH 06/10] arm64: dts: meson-gxbb-vega-s95: add HDMI nodes

[Neil Armstrong]

Add HDMI nodes to support graphics on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 760730d4e87b..6738b2aac9a0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -73,6 +73,17 @@
 		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
@@ -108,6 +119,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 06/10] arm64: dts: meson-gxbb-vega-s95: add HDMI nodes

[Neil Armstrong]

Add HDMI nodes to support graphics on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 760730d4e87b..6738b2aac9a0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -73,6 +73,17 @@
 		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
@@ -108,6 +119,18 @@
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 07/10] arm64: dts: meson-gxbb-vega-s95: enable CEC

[Neil Armstrong]

Add CEC nodes to support CEC communication on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 6738b2aac9a0..be8799653ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,6 +93,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
-- 
2.21.0

[PATCH 07/10] arm64: dts: meson-gxbb-vega-s95: enable CEC

[Neil Armstrong]

Add CEC nodes to support CEC communication on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 6738b2aac9a0..be8799653ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,6 +93,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 07/10] arm64: dts: meson-gxbb-vega-s95: enable CEC

[Neil Armstrong]

Add CEC nodes to support CEC communication on Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 6738b2aac9a0..be8799653ad7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,6 +93,13 @@
 	};
 };
 
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Neil Armstrong]

Add SARARC node and associated regulator to support reading the
ADC inputs on the Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index be8799653ad7..4d2aa4dc59e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -54,6 +54,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -152,6 +159,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
2.21.0

[PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Neil Armstrong]

Add SARARC node and associated regulator to support reading the
ADC inputs on the Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index be8799653ad7..4d2aa4dc59e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -54,6 +54,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -152,6 +159,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Neil Armstrong]

Add SARARC node and associated regulator to support reading the
ADC inputs on the Vega S95

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index be8799653ad7..4d2aa4dc59e7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -54,6 +54,13 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
 	vcc_3v3: regulator-vcc_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC_3V3";
@@ -152,6 +159,11 @@
 	clock-names = "clkin0";
 };
 
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

[Neil Armstrong]

Fix the SDIO WiFi support and add proper Bluetooth support on the
Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi  | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 4d2aa4dc59e7..9b52f3dcdd49 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,8 +93,7 @@
 
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
-				<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
@@ -167,7 +166,7 @@
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
+	pinctrl-0 = <&sdio_pins>;
 	pinctrl-1 = <&sdio_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
@@ -229,6 +228,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.21.0

[PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

[Neil Armstrong]

Fix the SDIO WiFi support and add proper Bluetooth support on the
Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi  | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 4d2aa4dc59e7..9b52f3dcdd49 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,8 +93,7 @@
 
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
-				<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
@@ -167,7 +166,7 @@
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
+	pinctrl-0 = <&sdio_pins>;
 	pinctrl-1 = <&sdio_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
@@ -229,6 +228,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

[Neil Armstrong]

Fix the SDIO WiFi support and add proper Bluetooth support on the
Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi  | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 4d2aa4dc59e7..9b52f3dcdd49 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -93,8 +93,7 @@
 
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>,
-				<&gpio GPIOX_20 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 		clocks = <&wifi32k>;
 		clock-names = "ext_clock";
 	};
@@ -167,7 +166,7 @@
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-	pinctrl-0 = <&sdio_pins &sdio_irq_pins>;
+	pinctrl-0 = <&sdio_pins>;
 	pinctrl-1 = <&sdio_clk_gate_pins>;
 	pinctrl-names = "default", "clk-gate";
 	#address-cells = <1>;
@@ -229,6 +228,19 @@
 	vqmmc-supply = <&vddio_boot>;
 };
 
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH 10/10] arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

[Neil Armstrong]

Add the external ethernet PHY interrupt on the Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 9b52f3dcdd49..18856f28fd60 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -128,6 +128,9 @@
 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
-- 
2.21.0

[PATCH 10/10] arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

[Neil Armstrong]

Add the external ethernet PHY interrupt on the Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 9b52f3dcdd49..18856f28fd60 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -128,6 +128,9 @@
 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 10/10] arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

[Neil Armstrong]

Add the external ethernet PHY interrupt on the Vega S95 board.

Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 9b52f3dcdd49..18856f28fd60 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -128,6 +128,9 @@
 		eth_phy0: ethernet-phy@0 {
 			/* Realtek RTL8211F (0x001cc916) */
 			reg = <0>;
+			interrupt-parent = <&gpio_intc>;
+			/* MAC_INTR on GPIOZ_15 */
+			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Enable SARADC on Wetek Boards.
as far I as remember there's a story behind this (and it would be nice
to have it documented here):
some of the SCPI firmware revisions don't enable the SAR ADC clock
when reading the SoCs temperature.
if the SAR ADC is disabled in Linux then the common clock framework
will disable the SAR ADC clock.
now, when the SCPI firmware uses the SAR ADC to read the SoC
temperature we only get garbage.

enabling the SAR ADC in Linux "fixes" this issue

> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
with that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Enable SARADC on Wetek Boards.
as far I as remember there's a story behind this (and it would be nice
to have it documented here):
some of the SCPI firmware revisions don't enable the SAR ADC clock
when reading the SoCs temperature.
if the SAR ADC is disabled in Linux then the common clock framework
will disable the SAR ADC clock.
now, when the SCPI firmware uses the SAR ADC to read the SoC
temperature we only get garbage.

enabling the SAR ADC in Linux "fixes" this issue

> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
with that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Enable SARADC on Wetek Boards.
as far I as remember there's a story behind this (and it would be nice
to have it documented here):
some of the SCPI firmware revisions don't enable the SAR ADC clock
when reading the SoCs temperature.
if the SAR ADC is disabled in Linux then the common clock framework
will disable the SAR ADC clock.
now, when the SCPI firmware uses the SAR ADC to read the SoC
temperature we only get garbage.

enabling the SAR ADC in Linux "fixes" this issue

> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
with that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 04/10] arm64: dts: meson-gxbb-wetek: enable bluetooth

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> This enables Bluetooth support for the following models:
>
> AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
> AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
> AP6330 in the WeTek Play 2 - BCM4330B1.hcd
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have any of these boards nor the schematics but the
shutdown-gpio matches with the reference board Bluetooth GPIO and the
rest looks fine, so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 04/10] arm64: dts: meson-gxbb-wetek: enable bluetooth

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> This enables Bluetooth support for the following models:
>
> AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
> AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
> AP6330 in the WeTek Play 2 - BCM4330B1.hcd
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have any of these boards nor the schematics but the
shutdown-gpio matches with the reference board Bluetooth GPIO and the
rest looks fine, so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 04/10] arm64: dts: meson-gxbb-wetek: enable bluetooth

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> This enables Bluetooth support for the following models:
>
> AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd
> AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd
> AP6330 in the WeTek Play 2 - BCM4330B1.hcd
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have any of these boards nor the schematics but the
shutdown-gpio matches with the reference board Bluetooth GPIO and the
rest looks fine, so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Align the regulator names with other GXBB SoCS for upcoming
> SARADC support and SDIO/SDCard fixes.
> Also fix how regulators are passed to MMC controllers & USB.
if I understand this last sentence correctly then the usb_pwr
regulator should be moved to &usb1 and passed as vbus-supply there

> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
apart from that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Align the regulator names with other GXBB SoCS for upcoming
> SARADC support and SDIO/SDCard fixes.
> Also fix how regulators are passed to MMC controllers & USB.
if I understand this last sentence correctly then the usb_pwr
regulator should be moved to &usb1 and passed as vbus-supply there

> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
apart from that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 05/10] arm64: dts: meson-gxbb-vega-s95: fix regulators

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Align the regulator names with other GXBB SoCS for upcoming
> SARADC support and SDIO/SDCard fixes.
> Also fix how regulators are passed to MMC controllers & USB.
if I understand this last sentence correctly then the usb_pwr
regulator should be moved to &usb1 and passed as vbus-supply there

> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
apart from that:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 07/10] arm64: dts: meson-gxbb-vega-s95: enable CEC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add CEC nodes to support CEC communication on Vega S95
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
just like on all other boards, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 07/10] arm64: dts: meson-gxbb-vega-s95: enable CEC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add CEC nodes to support CEC communication on Vega S95
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
just like on all other boards, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 07/10] arm64: dts: meson-gxbb-vega-s95: enable CEC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add CEC nodes to support CEC communication on Vega S95
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
just like on all other boards, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 06/10] arm64: dts: meson-gxbb-vega-s95: add HDMI nodes

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add HDMI nodes to support graphics on Vega S95
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
just like on all other boards, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 06/10] arm64: dts: meson-gxbb-vega-s95: add HDMI nodes

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add HDMI nodes to support graphics on Vega S95
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
just like on all other boards, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 06/10] arm64: dts: meson-gxbb-vega-s95: add HDMI nodes

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add HDMI nodes to support graphics on Vega S95
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
just like on all other boards, so:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add SARARC node and associated regulator to support reading the
> ADC inputs on the Vega S95
I'm curious: is this the same problem than on the Wetek boards (where
SCPI hwmon reads garbage if SAR ADC is disabled)?

> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
in any case:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add SARARC node and associated regulator to support reading the
> ADC inputs on the Vega S95
I'm curious: is this the same problem than on the Wetek boards (where
SCPI hwmon reads garbage if SAR ADC is disabled)?

> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
in any case:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add SARARC node and associated regulator to support reading the
> ADC inputs on the Vega S95
I'm curious: is this the same problem than on the Wetek boards (where
SCPI hwmon reads garbage if SAR ADC is disabled)?

> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
in any case:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 10/10] arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:24 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add the external ethernet PHY interrupt on the Vega S95 board.
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have this board (anymore, mine died) nor the schematics but it
matches other GXBB boards and looks correct so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 10/10] arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:24 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add the external ethernet PHY interrupt on the Vega S95 board.
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have this board (anymore, mine died) nor the schematics but it
matches other GXBB boards and looks correct so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 10/10] arm64: dts: meson-gxbb-vega-s95: add ethernet PHY interrupt

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:24 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Add the external ethernet PHY interrupt on the Vega S95 board.
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I don't have this board (anymore, mine died) nor the schematics but it
matches other GXBB boards and looks correct so:
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:24 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Fix the SDIO WiFi support and add proper Bluetooth support on the
> Vega S95 board.
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I'm the cause of everything that needed fixing here. thank you for
taking care of this, the result looks much better now:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

Re: [PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:24 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Fix the SDIO WiFi support and add proper Bluetooth support on the
> Vega S95 board.
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I'm the cause of everything that needed fixing here. thank you for
taking care of this, the result looks much better now:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 09/10] arm64: dts: meson-gxbb-vega-s95: fix WiFi/BT module support

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:24 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Fix the SDIO WiFi support and add proper Bluetooth support on the
> Vega S95 board.
>
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
I'm the cause of everything that needed fixing here. thank you for
taking care of this, the result looks much better now:
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Fix DTC warnings:
>
> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>         without "ranges" or child "reg" property
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
as well as:
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
>  arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 +---
there are more boards with the same "problem" out there
we should clean these up at some point as well


Martin

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Fix DTC warnings:
>
> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>         without "ranges" or child "reg" property
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
as well as:
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
>  arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 +---
there are more boards with the same "problem" out there
we should clean these up at some point as well


Martin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Fix DTC warnings:
>
> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>         without "ranges" or child "reg" property
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
as well as:
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

> ---
>  arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 +---
there are more boards with the same "problem" out there
we should clean these up at some point as well


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> - Remove serial1 alias
> - Add support for uart_A rts/cts
> - Add bluetooth uart_A subnode qith shutdown gpio
I tried this on my own Khadas VIM2:
Bluetooth: hci0: command 0x1001 tx timeout
Bluetooth: hci0: BCM: Reading local version info failed (-110)

I'm not sure whether this is specific to my board or what causes this.


Martin

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> - Remove serial1 alias
> - Add support for uart_A rts/cts
> - Add bluetooth uart_A subnode qith shutdown gpio
I tried this on my own Khadas VIM2:
Bluetooth: hci0: command 0x1001 tx timeout
Bluetooth: hci0: BCM: Reading local version info failed (-110)

I'm not sure whether this is specific to my board or what causes this.


Martin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> From: Christian Hewitt <christianshewitt@gmail.com>
>
> - Remove serial1 alias
> - Add support for uart_A rts/cts
> - Add bluetooth uart_A subnode qith shutdown gpio
I tried this on my own Khadas VIM2:
Bluetooth: hci0: command 0x1001 tx timeout
Bluetooth: hci0: BCM: Reading local version info failed (-110)

I'm not sure whether this is specific to my board or what causes this.


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

On 27/05/2019 20:36, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> - Remove serial1 alias
>> - Add support for uart_A rts/cts
>> - Add bluetooth uart_A subnode qith shutdown gpio
> I tried this on my own Khadas VIM2:
> Bluetooth: hci0: command 0x1001 tx timeout
> Bluetooth: hci0: BCM: Reading local version info failed (-110)
> 
> I'm not sure whether this is specific to my board or what causes this.

Which kernel version ?

We often see this, growing the delay after probe removes this, it's kind of
random issue that occurs on pre-5.1 kernels.

Neil

> 
> 
> Martin
> 

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

On 27/05/2019 20:36, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> - Remove serial1 alias
>> - Add support for uart_A rts/cts
>> - Add bluetooth uart_A subnode qith shutdown gpio
> I tried this on my own Khadas VIM2:
> Bluetooth: hci0: command 0x1001 tx timeout
> Bluetooth: hci0: BCM: Reading local version info failed (-110)
> 
> I'm not sure whether this is specific to my board or what causes this.

Which kernel version ?

We often see this, growing the delay after probe removes this, it's kind of
random issue that occurs on pre-5.1 kernels.

Neil

> 
> 
> Martin
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

On 27/05/2019 20:36, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> - Remove serial1 alias
>> - Add support for uart_A rts/cts
>> - Add bluetooth uart_A subnode qith shutdown gpio
> I tried this on my own Khadas VIM2:
> Bluetooth: hci0: command 0x1001 tx timeout
> Bluetooth: hci0: BCM: Reading local version info failed (-110)
> 
> I'm not sure whether this is specific to my board or what causes this.

Which kernel version ?

We often see this, growing the delay after probe removes this, it's kind of
random issue that occurs on pre-5.1 kernels.

Neil

> 
> 
> Martin
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Neil Armstrong]

On 27/05/2019 20:24, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Add SARARC node and associated regulator to support reading the
>> ADC inputs on the Vega S95
> I'm curious: is this the same problem than on the Wetek boards (where
> SCPI hwmon reads garbage if SAR ADC is disabled)?

Yes

> 
>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> in any case:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 

Re: [PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Neil Armstrong]

On 27/05/2019 20:24, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Add SARARC node and associated regulator to support reading the
>> ADC inputs on the Vega S95
> I'm curious: is this the same problem than on the Wetek boards (where
> SCPI hwmon reads garbage if SAR ADC is disabled)?

Yes

> 
>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> in any case:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 08/10] arm64: dts: meson-gxbb-vega-s95: enable SARADC

[Neil Armstrong]

On 27/05/2019 20:24, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:23 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Add SARARC node and associated regulator to support reading the
>> ADC inputs on the Vega S95
> I'm curious: is this the same problem than on the Wetek boards (where
> SCPI hwmon reads garbage if SAR ADC is disabled)?

Yes

> 
>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> in any case:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Neil Armstrong]

On 27/05/2019 20:15, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> Enable SARADC on Wetek Boards.
> as far I as remember there's a story behind this (and it would be nice
> to have it documented here):
> some of the SCPI firmware revisions don't enable the SAR ADC clock
> when reading the SoCs temperature.
> if the SAR ADC is disabled in Linux then the common clock framework
> will disable the SAR ADC clock.
> now, when the SCPI firmware uses the SAR ADC to read the SoC
> temperature we only get garbage.
> 
> enabling the SAR ADC in Linux "fixes" this issue

Yes seems to be this issue solved here

> 
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> with that:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 

Re: [PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Neil Armstrong]

On 27/05/2019 20:15, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> Enable SARADC on Wetek Boards.
> as far I as remember there's a story behind this (and it would be nice
> to have it documented here):
> some of the SCPI firmware revisions don't enable the SAR ADC clock
> when reading the SoCs temperature.
> if the SAR ADC is disabled in Linux then the common clock framework
> will disable the SAR ADC clock.
> now, when the SCPI firmware uses the SAR ADC to read the SoC
> temperature we only get garbage.
> 
> enabling the SAR ADC in Linux "fixes" this issue

Yes seems to be this issue solved here

> 
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> with that:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 03/10] arm64: dts: meson-gxbb-wetek: enable SARADC

[Neil Armstrong]

On 27/05/2019 20:15, Martin Blumenstingl wrote:
> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> Enable SARADC on Wetek Boards.
> as far I as remember there's a story behind this (and it would be nice
> to have it documented here):
> some of the SCPI firmware revisions don't enable the SAR ADC clock
> when reading the SoCs temperature.
> if the SAR ADC is disabled in Linux then the common clock framework
> will disable the SAR ADC clock.
> now, when the SCPI firmware uses the SAR ADC to read the SoC
> temperature we only get garbage.
> 
> enabling the SAR ADC in Linux "fixes" this issue

Yes seems to be this issue solved here

> 
>> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> with that:
> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> On 27/05/2019 20:36, Martin Blumenstingl wrote:
> > On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> From: Christian Hewitt <christianshewitt@gmail.com>
> >>
> >> - Remove serial1 alias
> >> - Add support for uart_A rts/cts
> >> - Add bluetooth uart_A subnode qith shutdown gpio
> > I tried this on my own Khadas VIM2:
> > Bluetooth: hci0: command 0x1001 tx timeout
> > Bluetooth: hci0: BCM: Reading local version info failed (-110)
> >
> > I'm not sure whether this is specific to my board or what causes this.
>
> Which kernel version ?
5.2-rc2

it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2


Martin

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> On 27/05/2019 20:36, Martin Blumenstingl wrote:
> > On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> From: Christian Hewitt <christianshewitt@gmail.com>
> >>
> >> - Remove serial1 alias
> >> - Add support for uart_A rts/cts
> >> - Add bluetooth uart_A subnode qith shutdown gpio
> > I tried this on my own Khadas VIM2:
> > Bluetooth: hci0: command 0x1001 tx timeout
> > Bluetooth: hci0: BCM: Reading local version info failed (-110)
> >
> > I'm not sure whether this is specific to my board or what causes this.
>
> Which kernel version ?
5.2-rc2

it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2


Martin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> On 27/05/2019 20:36, Martin Blumenstingl wrote:
> > On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> From: Christian Hewitt <christianshewitt@gmail.com>
> >>
> >> - Remove serial1 alias
> >> - Add support for uart_A rts/cts
> >> - Add bluetooth uart_A subnode qith shutdown gpio
> > I tried this on my own Khadas VIM2:
> > Bluetooth: hci0: command 0x1001 tx timeout
> > Bluetooth: hci0: BCM: Reading local version info failed (-110)
> >
> > I'm not sure whether this is specific to my board or what causes this.
>
> Which kernel version ?
5.2-rc2

it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

Hi,

On 29/05/2019 20:08, Martin Blumenstingl wrote:
> On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> On 27/05/2019 20:36, Martin Blumenstingl wrote:
>>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>
>>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>>
>>>> - Remove serial1 alias
>>>> - Add support for uart_A rts/cts
>>>> - Add bluetooth uart_A subnode qith shutdown gpio
>>> I tried this on my own Khadas VIM2:
>>> Bluetooth: hci0: command 0x1001 tx timeout
>>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
>>>
>>> I'm not sure whether this is specific to my board or what causes this.
>>
>> Which kernel version ?
> 5.2-rc2
> 
> it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2

Can you try with :

clocks = <&wifi32k>;
clock-names = "lpo";

added in the bluetooth node ?

Neil

> 
> 
> Martin
> 

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

Hi,

On 29/05/2019 20:08, Martin Blumenstingl wrote:
> On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> On 27/05/2019 20:36, Martin Blumenstingl wrote:
>>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>
>>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>>
>>>> - Remove serial1 alias
>>>> - Add support for uart_A rts/cts
>>>> - Add bluetooth uart_A subnode qith shutdown gpio
>>> I tried this on my own Khadas VIM2:
>>> Bluetooth: hci0: command 0x1001 tx timeout
>>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
>>>
>>> I'm not sure whether this is specific to my board or what causes this.
>>
>> Which kernel version ?
> 5.2-rc2
> 
> it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2

Can you try with :

clocks = <&wifi32k>;
clock-names = "lpo";

added in the bluetooth node ?

Neil

> 
> 
> Martin
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Neil Armstrong]

Hi,

On 29/05/2019 20:08, Martin Blumenstingl wrote:
> On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> On 27/05/2019 20:36, Martin Blumenstingl wrote:
>>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>
>>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>>
>>>> - Remove serial1 alias
>>>> - Add support for uart_A rts/cts
>>>> - Add bluetooth uart_A subnode qith shutdown gpio
>>> I tried this on my own Khadas VIM2:
>>> Bluetooth: hci0: command 0x1001 tx timeout
>>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
>>>
>>> I'm not sure whether this is specific to my board or what causes this.
>>
>> Which kernel version ?
> 5.2-rc2
> 
> it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2

Can you try with :

clocks = <&wifi32k>;
clock-names = "lpo";

added in the bluetooth node ?

Neil

> 
> 
> Martin
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Christian Hewitt]

On 3 Jun 2019, at 12:57 pm, Neil Armstrong <narmstrong@baylibre.com> wrote:
> 
> On 29/05/2019 20:08, Martin Blumenstingl wrote:
>> On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>> 
>>> On 27/05/2019 20:36, Martin Blumenstingl wrote:
>>>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>> 
>>>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>>> 
>>>>> - Remove serial1 alias
>>>>> - Add support for uart_A rts/cts
>>>>> - Add bluetooth uart_A subnode qith shutdown gpio
>>>> I tried this on my own Khadas VIM2:
>>>> Bluetooth: hci0: command 0x1001 tx timeout
>>>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
>>>> 
>>>> I'm not sure whether this is specific to my board or what causes this.
>>> 
>>> Which kernel version ?
>> 5.2-rc2
>> 
>> it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2
> 
> Can you try with :
> 
> clocks = <&wifi32k>;
> clock-names = "lpo";
> 
> added in the bluetooth node ?

Tested and confirmed working with rev 1.2 ‘basic' and 5.1 kernel with those nodes added.

VIM2:~ # dmesg | grep -i blue
[   10.793600] Bluetooth: Core ver 2.22
[   10.793792] Bluetooth: HCI device and connection manager initialized
[   10.793814] Bluetooth: HCI socket layer initialized
[   10.793821] Bluetooth: L2CAP socket layer initialized
[   10.793851] Bluetooth: SCO socket layer initialized
[   10.801928] Bluetooth: HCI UART driver ver 2.3
[   10.801944] Bluetooth: HCI UART protocol H4 registered
[   10.804919] Bluetooth: HCI UART protocol Broadcom registered
[   10.805025] Bluetooth: HCI UART protocol QCA registered
[   11.016629] Bluetooth: hci0: BCM: chip id 101
[   11.018537] Bluetooth: hci0: BCM: features 0x2f
[   11.043112] Bluetooth: hci0: BCM4354A2
[   11.043134] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[   11.075919] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   11.359784] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.359793] Bluetooth: BNEP filters: protocol multicast
[   11.359811] Bluetooth: BNEP socket layer initialized
[   17.075509] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266

I use BT remotes to avoid issues with multiple boards responding to IR so it was working before at some point. I assume I dropped a change somewhere in the process of feeding you the batch of patches - apologies!

Christian

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Christian Hewitt]

On 3 Jun 2019, at 12:57 pm, Neil Armstrong <narmstrong@baylibre.com> wrote:
> 
> On 29/05/2019 20:08, Martin Blumenstingl wrote:
>> On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>> 
>>> On 27/05/2019 20:36, Martin Blumenstingl wrote:
>>>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>> 
>>>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>>> 
>>>>> - Remove serial1 alias
>>>>> - Add support for uart_A rts/cts
>>>>> - Add bluetooth uart_A subnode qith shutdown gpio
>>>> I tried this on my own Khadas VIM2:
>>>> Bluetooth: hci0: command 0x1001 tx timeout
>>>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
>>>> 
>>>> I'm not sure whether this is specific to my board or what causes this.
>>> 
>>> Which kernel version ?
>> 5.2-rc2
>> 
>> it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2
> 
> Can you try with :
> 
> clocks = <&wifi32k>;
> clock-names = "lpo";
> 
> added in the bluetooth node ?

Tested and confirmed working with rev 1.2 ‘basic' and 5.1 kernel with those nodes added.

VIM2:~ # dmesg | grep -i blue
[   10.793600] Bluetooth: Core ver 2.22
[   10.793792] Bluetooth: HCI device and connection manager initialized
[   10.793814] Bluetooth: HCI socket layer initialized
[   10.793821] Bluetooth: L2CAP socket layer initialized
[   10.793851] Bluetooth: SCO socket layer initialized
[   10.801928] Bluetooth: HCI UART driver ver 2.3
[   10.801944] Bluetooth: HCI UART protocol H4 registered
[   10.804919] Bluetooth: HCI UART protocol Broadcom registered
[   10.805025] Bluetooth: HCI UART protocol QCA registered
[   11.016629] Bluetooth: hci0: BCM: chip id 101
[   11.018537] Bluetooth: hci0: BCM: features 0x2f
[   11.043112] Bluetooth: hci0: BCM4354A2
[   11.043134] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[   11.075919] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   11.359784] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.359793] Bluetooth: BNEP filters: protocol multicast
[   11.359811] Bluetooth: BNEP socket layer initialized
[   17.075509] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266

I use BT remotes to avoid issues with multiple boards responding to IR so it was working before at some point. I assume I dropped a change somewhere in the process of feeding you the batch of patches - apologies!

Christian
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Christian Hewitt]

On 3 Jun 2019, at 12:57 pm, Neil Armstrong <narmstrong@baylibre.com> wrote:
> 
> On 29/05/2019 20:08, Martin Blumenstingl wrote:
>> On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>> 
>>> On 27/05/2019 20:36, Martin Blumenstingl wrote:
>>>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>>>> 
>>>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>>> 
>>>>> - Remove serial1 alias
>>>>> - Add support for uart_A rts/cts
>>>>> - Add bluetooth uart_A subnode qith shutdown gpio
>>>> I tried this on my own Khadas VIM2:
>>>> Bluetooth: hci0: command 0x1001 tx timeout
>>>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
>>>> 
>>>> I'm not sure whether this is specific to my board or what causes this.
>>> 
>>> Which kernel version ?
>> 5.2-rc2
>> 
>> it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2
> 
> Can you try with :
> 
> clocks = <&wifi32k>;
> clock-names = "lpo";
> 
> added in the bluetooth node ?

Tested and confirmed working with rev 1.2 ‘basic' and 5.1 kernel with those nodes added.

VIM2:~ # dmesg | grep -i blue
[   10.793600] Bluetooth: Core ver 2.22
[   10.793792] Bluetooth: HCI device and connection manager initialized
[   10.793814] Bluetooth: HCI socket layer initialized
[   10.793821] Bluetooth: L2CAP socket layer initialized
[   10.793851] Bluetooth: SCO socket layer initialized
[   10.801928] Bluetooth: HCI UART driver ver 2.3
[   10.801944] Bluetooth: HCI UART protocol H4 registered
[   10.804919] Bluetooth: HCI UART protocol Broadcom registered
[   10.805025] Bluetooth: HCI UART protocol QCA registered
[   11.016629] Bluetooth: hci0: BCM: chip id 101
[   11.018537] Bluetooth: hci0: BCM: features 0x2f
[   11.043112] Bluetooth: hci0: BCM4354A2
[   11.043134] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[   11.075919] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[   11.359784] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.359793] Bluetooth: BNEP filters: protocol multicast
[   11.359811] Bluetooth: BNEP socket layer initialized
[   17.075509] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266

I use BT remotes to avoid issues with multiple boards responding to IR so it was working before at some point. I assume I dropped a change somewhere in the process of feeding you the batch of patches - apologies!

Christian
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 00/10] arm64: meson-gx: misc fixes

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset :
> - Fixes GPIO key DT on Khadas VIM2 board
> - Fixes regulator naming on Vega S95 board
> - Enable SARADC on Wetek and Vega S95 boards
> - Enable/Fix Bluetooth on VIM2, Wetek and Vega S95 boards
> - Enable CEC & HDMI on Vega S95 board
> - Adds ethernet PHY interrupt on Vega S95 board

Series queued for v5.3 with tags from Martin,

Thanks,

Kevin

Re: [PATCH 00/10] arm64: meson-gx: misc fixes

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset :
> - Fixes GPIO key DT on Khadas VIM2 board
> - Fixes regulator naming on Vega S95 board
> - Enable SARADC on Wetek and Vega S95 boards
> - Enable/Fix Bluetooth on VIM2, Wetek and Vega S95 boards
> - Enable CEC & HDMI on Vega S95 board
> - Adds ethernet PHY interrupt on Vega S95 board

Series queued for v5.3 with tags from Martin,

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 00/10] arm64: meson-gx: misc fixes

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> This patchset :
> - Fixes GPIO key DT on Khadas VIM2 board
> - Fixes regulator naming on Vega S95 board
> - Enable SARADC on Wetek and Vega S95 boards
> - Enable/Fix Bluetooth on VIM2, Wetek and Vega S95 boards
> - Enable CEC & HDMI on Vega S95 board
> - Adds ethernet PHY interrupt on Vega S95 board

Series queued for v5.3 with tags from Martin,

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Mon, Jun 3, 2019 at 10:57 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Hi,
>
> On 29/05/2019 20:08, Martin Blumenstingl wrote:
> > On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> On 27/05/2019 20:36, Martin Blumenstingl wrote:
> >>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>>>
> >>>> From: Christian Hewitt <christianshewitt@gmail.com>
> >>>>
> >>>> - Remove serial1 alias
> >>>> - Add support for uart_A rts/cts
> >>>> - Add bluetooth uart_A subnode qith shutdown gpio
> >>> I tried this on my own Khadas VIM2:
> >>> Bluetooth: hci0: command 0x1001 tx timeout
> >>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
> >>>
> >>> I'm not sure whether this is specific to my board or what causes this.
> >>
> >> Which kernel version ?
> > 5.2-rc2
> >
> > it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2
>
> Can you try with :
>
> clocks = <&wifi32k>;
> clock-names = "lpo";
>
> added in the bluetooth node ?
that did it!

I think I also found the explanation why:
on my Khadas VIM2 SD card I don't have linux-firmware installed.
Thus the wifi driver will disable the 32kHz LPO clock again, breaking Bluetooth

are you going to send patches for the existing boards or do you want
someone else to do it?


Martin

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Mon, Jun 3, 2019 at 10:57 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Hi,
>
> On 29/05/2019 20:08, Martin Blumenstingl wrote:
> > On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> On 27/05/2019 20:36, Martin Blumenstingl wrote:
> >>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>>>
> >>>> From: Christian Hewitt <christianshewitt@gmail.com>
> >>>>
> >>>> - Remove serial1 alias
> >>>> - Add support for uart_A rts/cts
> >>>> - Add bluetooth uart_A subnode qith shutdown gpio
> >>> I tried this on my own Khadas VIM2:
> >>> Bluetooth: hci0: command 0x1001 tx timeout
> >>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
> >>>
> >>> I'm not sure whether this is specific to my board or what causes this.
> >>
> >> Which kernel version ?
> > 5.2-rc2
> >
> > it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2
>
> Can you try with :
>
> clocks = <&wifi32k>;
> clock-names = "lpo";
>
> added in the bluetooth node ?
that did it!

I think I also found the explanation why:
on my Khadas VIM2 SD card I don't have linux-firmware installed.
Thus the wifi driver will disable the 32kHz LPO clock again, breaking Bluetooth

are you going to send patches for the existing boards or do you want
someone else to do it?


Martin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 02/10] arm64: dts: meson-gxm-khadas-vim2: fix Bluetooth support

[Martin Blumenstingl]

On Mon, Jun 3, 2019 at 10:57 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Hi,
>
> On 29/05/2019 20:08, Martin Blumenstingl wrote:
> > On Wed, May 29, 2019 at 12:25 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>
> >> On 27/05/2019 20:36, Martin Blumenstingl wrote:
> >>> On Mon, May 27, 2019 at 3:22 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
> >>>>
> >>>> From: Christian Hewitt <christianshewitt@gmail.com>
> >>>>
> >>>> - Remove serial1 alias
> >>>> - Add support for uart_A rts/cts
> >>>> - Add bluetooth uart_A subnode qith shutdown gpio
> >>> I tried this on my own Khadas VIM2:
> >>> Bluetooth: hci0: command 0x1001 tx timeout
> >>> Bluetooth: hci0: BCM: Reading local version info failed (-110)
> >>>
> >>> I'm not sure whether this is specific to my board or what causes this.
> >>
> >> Which kernel version ?
> > 5.2-rc2
> >
> > it's a Khadas VIM2 Basic (thus it has a AP6356S), board revision v1.2
>
> Can you try with :
>
> clocks = <&wifi32k>;
> clock-names = "lpo";
>
> added in the bluetooth node ?
that did it!

I think I also found the explanation why:
on my Khadas VIM2 SD card I don't have linux-firmware installed.
Thus the wifi driver will disable the 32kHz LPO clock again, breaking Bluetooth

are you going to send patches for the existing boards or do you want
someone else to do it?


Martin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Fix DTC warnings:
>
> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
> 	without "ranges" or child "reg" property
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

This patch is missing a S-o-B from the author (Christian?)

The From, Suggested-by and Signed-off-by send mixed messages.  Please
clarify if if this is missing a signoff from Christian or if the author
is Neil.

Thanks,

Kevin

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Fix DTC warnings:
>
> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
> 	without "ranges" or child "reg" property
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

This patch is missing a S-o-B from the author (Christian?)

The From, Suggested-by and Signed-off-by send mixed messages.  Please
clarify if if this is missing a signoff from Christian or if the author
is Neil.

Thanks,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> From: Christian Hewitt <christianshewitt@gmail.com>
>
> Fix DTC warnings:
>
> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
> 	without "ranges" or child "reg" property
>
> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

This patch is missing a S-o-B from the author (Christian?)

The From, Suggested-by and Signed-off-by send mixed messages.  Please
clarify if if this is missing a signoff from Christian or if the author
is Neil.

Thanks,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Neil Armstrong]

On 06/06/2019 22:00, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> Fix DTC warnings:
>>
>> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>> 	without "ranges" or child "reg" property
>>
>> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> This patch is missing a S-o-B from the author (Christian?)
> 
> The From, Suggested-by and Signed-off-by send mixed messages.  Please
> clarify if if this is missing a signoff from Christian or if the author
> is Neil.
> 
> Thanks,
> 
> Kevin
> 


The author is Christian Hewitt <christianshewitt@gmail.com>

so s/Suggested-by/Signed-off-by/

Do you need a resend ?

Neil

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Neil Armstrong]

On 06/06/2019 22:00, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> Fix DTC warnings:
>>
>> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>> 	without "ranges" or child "reg" property
>>
>> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> This patch is missing a S-o-B from the author (Christian?)
> 
> The From, Suggested-by and Signed-off-by send mixed messages.  Please
> clarify if if this is missing a signoff from Christian or if the author
> is Neil.
> 
> Thanks,
> 
> Kevin
> 


The author is Christian Hewitt <christianshewitt@gmail.com>

so s/Suggested-by/Signed-off-by/

Do you need a resend ?

Neil

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Neil Armstrong]

On 06/06/2019 22:00, Kevin Hilman wrote:
> Neil Armstrong <narmstrong@baylibre.com> writes:
> 
>> From: Christian Hewitt <christianshewitt@gmail.com>
>>
>> Fix DTC warnings:
>>
>> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>> 	without "ranges" or child "reg" property
>>
>> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> This patch is missing a S-o-B from the author (Christian?)
> 
> The From, Suggested-by and Signed-off-by send mixed messages.  Please
> clarify if if this is missing a signoff from Christian or if the author
> is Neil.
> 
> Thanks,
> 
> Kevin
> 


The author is Christian Hewitt <christianshewitt@gmail.com>

so s/Suggested-by/Signed-off-by/

Do you need a resend ?

Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 06/06/2019 22:00, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>> 
>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>
>>> Fix DTC warnings:
>>>
>>> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>>>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>>> 	without "ranges" or child "reg" property
>>>
>>> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
>>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> 
>> This patch is missing a S-o-B from the author (Christian?)
>> 
>> The From, Suggested-by and Signed-off-by send mixed messages.  Please
>> clarify if if this is missing a signoff from Christian or if the author
>> is Neil.
>> 
>> Thanks,
>> 
>> Kevin
>> 
>
> The author is Christian Hewitt <christianshewitt@gmail.com>
>
> so s/Suggested-by/Signed-off-by/
>
> Do you need a resend ?

No need, I'll fix up locally.

Thanks for clarifying,

Kevin

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 06/06/2019 22:00, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>> 
>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>
>>> Fix DTC warnings:
>>>
>>> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>>>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>>> 	without "ranges" or child "reg" property
>>>
>>> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
>>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> 
>> This patch is missing a S-o-B from the author (Christian?)
>> 
>> The From, Suggested-by and Signed-off-by send mixed messages.  Please
>> clarify if if this is missing a signoff from Christian or if the author
>> is Neil.
>> 
>> Thanks,
>> 
>> Kevin
>> 
>
> The author is Christian Hewitt <christianshewitt@gmail.com>
>
> so s/Suggested-by/Signed-off-by/
>
> Do you need a resend ?

No need, I'll fix up locally.

Thanks for clarifying,

Kevin

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 01/10] arm64: dts: meson-gxm-khadas-vim2: fix gpio-keys-polled node

[Kevin Hilman]

Neil Armstrong <narmstrong@baylibre.com> writes:

> On 06/06/2019 22:00, Kevin Hilman wrote:
>> Neil Armstrong <narmstrong@baylibre.com> writes:
>> 
>>> From: Christian Hewitt <christianshewitt@gmail.com>
>>>
>>> Fix DTC warnings:
>>>
>>> meson-gxm-khadas-vim2.dtb: Warning (avoid_unnecessary_addr_size):
>>>    /gpio-keys-polled: unnecessary #address-cells/#size-cells
>>> 	without "ranges" or child "reg" property
>>>
>>> Fixes: b8b74dda3908 ("ARM64: dts: meson-gxm: Add support for Khadas VIM2")
>>> Suggested-by: Christian Hewitt <christianshewitt@gmail.com>
>>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> 
>> This patch is missing a S-o-B from the author (Christian?)
>> 
>> The From, Suggested-by and Signed-off-by send mixed messages.  Please
>> clarify if if this is missing a signoff from Christian or if the author
>> is Neil.
>> 
>> Thanks,
>> 
>> Kevin
>> 
>
> The author is Christian Hewitt <christianshewitt@gmail.com>
>
> so s/Suggested-by/Signed-off-by/
>
> Do you need a resend ?

No need, I'll fix up locally.

Thanks for clarifying,

Kevin

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic