* [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in
@ 2019-07-29 19:22 Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Lorenzo Bianconi
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Lorenzo Bianconi @ 2019-07-29 19:22 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
Move odr and gain table in st_lsm6dsx_sensor_settings maps in order to support
devices with different odr/fs definitions. Moreover move iio channel
definitions in st_lsm6dsx_sensor_settings.
This is a preliminary series to add support for LSM9DS1 and irq wake up support.
Changes since v1:
- rebase ontop of linux-iio testing branch
- move iio channel definitions in st_lsm6dsx_sensor_settings
Lorenzo Bianconi (4):
iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
iio: imu: st_lsm6dsx: inline output acc/gyro output regs
iio: imu: st_lsm6dsx: move iio chan definitions in
st_lsm6dsx_sensor_settings
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 9 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 473 +++++++++++++++----
2 files changed, 387 insertions(+), 95 deletions(-)
--
2.21.0
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
2019-07-29 19:22 [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in Lorenzo Bianconi
@ 2019-07-29 19:22 ` Lorenzo Bianconi
2019-08-05 14:17 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table " Lorenzo Bianconi
` (2 subsequent siblings)
3 siblings, 1 reply; 11+ messages in thread
From: Lorenzo Bianconi @ 2019-07-29 19:22 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
Move sensor odr table in st_lsm6dsx_sensor_settings in order to support
sensors with different odr maps. This is a preliminary patch to add
support for LSM9DS1 sensor to st_lsm6dsx driver
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 196 ++++++++++++++++---
2 files changed, 166 insertions(+), 32 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index af379a5429ed..3a89f3f6e2c7 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -200,6 +200,7 @@ struct st_lsm6dsx_ext_dev_settings {
* @wai: Sensor WhoAmI default value.
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
+ * @odr_table: Hw sensors odr table (Hz + val).
* @decimator: List of decimator register info (addr + mask).
* @batch: List of FIFO batching register info (addr + mask).
* @fifo_ops: Sensor hw FIFO parameters.
@@ -213,6 +214,7 @@ struct st_lsm6dsx_settings {
enum st_lsm6dsx_hw_id hw_id;
const char *name;
} id[ST_LSM6DSX_MAX_ID];
+ struct st_lsm6dsx_odr_table_entry odr_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_fifo_ops fifo_ops;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index d8c4417cf4eb..b3c6c9792913 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -69,33 +69,6 @@
#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24
#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26
-static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
- [ST_LSM6DSX_ID_ACC] = {
- .reg = {
- .addr = 0x10,
- .mask = GENMASK(7, 4),
- },
- .odr_avl[0] = { 13, 0x01 },
- .odr_avl[1] = { 26, 0x02 },
- .odr_avl[2] = { 52, 0x03 },
- .odr_avl[3] = { 104, 0x04 },
- .odr_avl[4] = { 208, 0x05 },
- .odr_avl[5] = { 416, 0x06 },
- },
- [ST_LSM6DSX_ID_GYRO] = {
- .reg = {
- .addr = 0x11,
- .mask = GENMASK(7, 4),
- },
- .odr_avl[0] = { 13, 0x01 },
- .odr_avl[1] = { 26, 0x02 },
- .odr_avl[2] = { 52, 0x03 },
- .odr_avl[3] = { 104, 0x04 },
- .odr_avl[4] = { 208, 0x05 },
- .odr_avl[5] = { 416, 0x06 },
- }
-};
-
static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -129,6 +102,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3_DEV_NAME,
},
},
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -179,6 +178,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3H_DEV_NAME,
},
},
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -238,6 +263,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3TRC_DEV_NAME,
},
},
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -291,6 +342,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DSOX_DEV_NAME,
},
},
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -359,6 +436,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_ASM330LHH_DEV_NAME,
},
},
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -401,6 +504,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DSR_DEV_NAME,
},
},
+ .odr_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(7, 4),
+ },
+ .odr_avl[0] = { 13, 0x01 },
+ .odr_avl[1] = { 26, 0x02 },
+ .odr_avl[2] = { 52, 0x03 },
+ .odr_avl[3] = { 104, 0x04 },
+ .odr_avl[4] = { 208, 0x05 },
+ .odr_avl[5] = { 416, 0x06 },
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -563,20 +692,22 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
{
+ const struct st_lsm6dsx_odr_table_entry *odr_table;
int i;
+ odr_table = &sensor->hw->settings->odr_table[sensor->id];
for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
/*
* ext devices can run at different odr respect to
* accel sensor
*/
- if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz >= odr)
+ if (odr_table->odr_avl[i].hz >= odr)
break;
if (i == ST_LSM6DSX_ODR_LIST_SIZE)
return -EINVAL;
- *val = st_lsm6dsx_odr_table[sensor->id].odr_avl[i].val;
+ *val = odr_table->odr_avl[i].val;
return 0;
}
@@ -641,7 +772,7 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
return err;
}
- reg = &st_lsm6dsx_odr_table[ref_sensor->id].reg;
+ reg = &hw->settings->odr_table[ref_sensor->id].reg;
data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
}
@@ -786,11 +917,12 @@ st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
{
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
enum st_lsm6dsx_sensor_id id = sensor->id;
+ struct st_lsm6dsx_hw *hw = sensor->hw;
int i, len = 0;
for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
- st_lsm6dsx_odr_table[id].odr_avl[i].hz);
+ hw->settings->odr_table[id].odr_avl[i].hz);
buf[len - 1] = '\n';
return len;
@@ -1040,7 +1172,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
sensor = iio_priv(iio_dev);
sensor->id = id;
sensor->hw = hw;
- sensor->odr = st_lsm6dsx_odr_table[id].odr_avl[0].hz;
+ sensor->odr = hw->settings->odr_table[id].odr_avl[0].hz;
sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain;
sensor->watermark = 1;
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
2019-07-29 19:22 [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Lorenzo Bianconi
@ 2019-07-29 19:22 ` Lorenzo Bianconi
2019-08-05 14:18 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings Lorenzo Bianconi
3 siblings, 1 reply; 11+ messages in thread
From: Lorenzo Bianconi @ 2019-07-29 19:22 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
Move fs_table in st_lsm6dsx_sensor_settings in order to support
sensors with different gain maps. This is a preliminary patch to add
support for LSM9DS1 sensor to st_lsm6dsx driver
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 175 +++++++++++++++----
2 files changed, 144 insertions(+), 33 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 3a89f3f6e2c7..ab1c66615d67 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -201,6 +201,7 @@ struct st_lsm6dsx_ext_dev_settings {
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
* @odr_table: Hw sensors odr table (Hz + val).
+ * @fs_table: Hw sensors gain table (gain + val).
* @decimator: List of decimator register info (addr + mask).
* @batch: List of FIFO batching register info (addr + mask).
* @fifo_ops: Sensor hw FIFO parameters.
@@ -215,6 +216,7 @@ struct st_lsm6dsx_settings {
const char *name;
} id[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_odr_table_entry odr_table[2];
+ struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_fifo_ops fifo_ops;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index b3c6c9792913..9aa109428a52 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -69,29 +69,6 @@
#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24
#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26
-static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
- [ST_LSM6DSX_ID_ACC] = {
- .reg = {
- .addr = 0x10,
- .mask = GENMASK(3, 2),
- },
- .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
- .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
- .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
- .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
- },
- [ST_LSM6DSX_ID_GYRO] = {
- .reg = {
- .addr = 0x11,
- .mask = GENMASK(3, 2),
- },
- .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
- .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
- .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
- .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
- }
-};
-
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x69,
@@ -128,6 +105,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[5] = { 416, 0x06 },
},
},
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
+ .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+ .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+ .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -204,6 +203,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[5] = { 416, 0x06 },
},
},
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
+ .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+ .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+ .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -289,6 +310,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[5] = { 416, 0x06 },
},
},
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
+ .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+ .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+ .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ },
+ },
.decimator = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x08,
@@ -368,6 +411,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[5] = { 416, 0x06 },
},
},
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
+ .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+ .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+ .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -462,6 +527,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[5] = { 416, 0x06 },
},
},
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
+ .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+ .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+ .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -530,6 +617,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.odr_avl[5] = { 416, 0x06 },
},
},
+ .fs_table = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .reg = {
+ .addr = 0x10,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
+ .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
+ .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
+ .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .reg = {
+ .addr = 0x11,
+ .mask = GENMASK(3, 2),
+ },
+ .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
+ .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
+ .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
+ .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
+ },
+ },
.batch = {
[ST_LSM6DSX_ID_ACC] = {
.addr = 0x09,
@@ -665,23 +774,22 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
u32 gain)
{
- struct st_lsm6dsx_hw *hw = sensor->hw;
- const struct st_lsm6dsx_reg *reg;
+ const struct st_lsm6dsx_fs_table_entry *fs_table;
unsigned int data;
int i, err;
- u8 val;
+ fs_table = &sensor->hw->settings->fs_table[sensor->id];
for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
- if (st_lsm6dsx_fs_table[sensor->id].fs_avl[i].gain == gain)
+ if (fs_table->fs_avl[i].gain == gain)
break;
if (i == ST_LSM6DSX_FS_LIST_SIZE)
return -EINVAL;
- val = st_lsm6dsx_fs_table[sensor->id].fs_avl[i].val;
- reg = &st_lsm6dsx_fs_table[sensor->id].reg;
- data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
- err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
+ data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
+ fs_table->reg.mask);
+ err = st_lsm6dsx_update_bits_locked(sensor->hw, fs_table->reg.addr,
+ fs_table->reg.mask, data);
if (err < 0)
return err;
@@ -934,11 +1042,12 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
{
struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
enum st_lsm6dsx_sensor_id id = sensor->id;
+ struct st_lsm6dsx_hw *hw = sensor->hw;
int i, len = 0;
for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
- st_lsm6dsx_fs_table[id].fs_avl[i].gain);
+ hw->settings->fs_table[id].fs_avl[i].gain);
buf[len - 1] = '\n';
return len;
@@ -1173,7 +1282,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
sensor->id = id;
sensor->hw = hw;
sensor->odr = hw->settings->odr_table[id].odr_avl[0].hz;
- sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain;
+ sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
sensor->watermark = 1;
switch (id) {
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
2019-07-29 19:22 [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table " Lorenzo Bianconi
@ 2019-07-29 19:22 ` Lorenzo Bianconi
2019-08-02 5:35 ` Martin Kepplinger
2019-07-29 19:22 ` [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings Lorenzo Bianconi
3 siblings, 1 reply; 11+ messages in thread
From: Lorenzo Bianconi @ 2019-07-29 19:22 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
Remove output register definition and inline register value since
they are used only for iio channel definition. This is a preliminary
patch to add support for LSM9DS1 sensor to st_lsm6dsx driver
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++---------------
1 file changed, 6 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 9aa109428a52..0abd5b85b398 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -61,14 +61,6 @@
#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13
#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5)
-#define ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR 0x28
-#define ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR 0x2a
-#define ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR 0x2c
-
-#define ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR 0x22
-#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24
-#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26
-
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x69,
@@ -701,22 +693,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
};
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR,
- IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR,
- IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR,
- IIO_MOD_Z, 2),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR,
- IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR,
- IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR,
- IIO_MOD_Z, 2),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
IIO_CHAN_SOFT_TIMESTAMP(3),
};
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
2019-07-29 19:22 [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in Lorenzo Bianconi
` (2 preceding siblings ...)
2019-07-29 19:22 ` [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs Lorenzo Bianconi
@ 2019-07-29 19:22 ` Lorenzo Bianconi
2019-08-02 5:36 ` Martin Kepplinger
3 siblings, 1 reply; 11+ messages in thread
From: Lorenzo Bianconi @ 2019-07-29 19:22 UTC (permalink / raw)
To: jic23; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
Move IIO channel definitions in st_lsm6dsx_sensor_settings in order to
support sensors with different channels maps.
This is a preliminary patch to add support for LSM9DS1 sensor to
st_lsm6dsx driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 96 ++++++++++++++++----
2 files changed, 81 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index ab1c66615d67..5090f1b3525a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -200,6 +200,7 @@ struct st_lsm6dsx_ext_dev_settings {
* @wai: Sensor WhoAmI default value.
* @max_fifo_size: Sensor max fifo length in FIFO words.
* @id: List of hw id/device name supported by the driver configuration.
+ * @channels: IIO channels supported by the device.
* @odr_table: Hw sensors odr table (Hz + val).
* @fs_table: Hw sensors gain table (gain + val).
* @decimator: List of decimator register info (addr + mask).
@@ -215,6 +216,10 @@ struct st_lsm6dsx_settings {
enum st_lsm6dsx_hw_id hw_id;
const char *name;
} id[ST_LSM6DSX_MAX_ID];
+ struct {
+ const struct iio_chan_spec *chan;
+ int len;
+ } channels[2];
struct st_lsm6dsx_odr_table_entry odr_table[2];
struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 0abd5b85b398..fc4d18b58c97 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -61,6 +61,20 @@
#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13
#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5)
+static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
+ ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
{
.wai = 0x69,
@@ -71,6 +85,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -169,6 +193,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3H_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -276,6 +310,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DS3TRC_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -377,6 +421,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DSOX_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -493,6 +547,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_ASM330LHH_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -583,6 +647,16 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.name = ST_LSM6DSR_DEV_NAME,
},
},
+ .channels = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .chan = st_lsm6dsx_acc_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .chan = st_lsm6dsx_gyro_channels,
+ .len = ARRAY_SIZE(st_lsm6dsx_gyro_channels),
+ },
+ },
.odr_table = {
[ST_LSM6DSX_ID_ACC] = {
.reg = {
@@ -692,20 +766,6 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
},
};
-static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x28, IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2a, IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL(IIO_ACCEL, 0x2c, IIO_MOD_Z, 2),
- IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
-static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x22, IIO_MOD_X, 0),
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x24, IIO_MOD_Y, 1),
- ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x26, IIO_MOD_Z, 2),
- IIO_CHAN_SOFT_TIMESTAMP(3),
-};
-
int st_lsm6dsx_set_page(struct st_lsm6dsx_hw *hw, bool enable)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
@@ -1263,6 +1323,8 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
iio_dev->modes = INDIO_DIRECT_MODE;
iio_dev->dev.parent = hw->dev;
iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks;
+ iio_dev->channels = hw->settings->channels[id].chan;
+ iio_dev->num_channels = hw->settings->channels[id].len;
sensor = iio_priv(iio_dev);
sensor->id = id;
@@ -1273,18 +1335,12 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
switch (id) {
case ST_LSM6DSX_ID_ACC:
- iio_dev->channels = st_lsm6dsx_acc_channels;
- iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels);
iio_dev->info = &st_lsm6dsx_acc_info;
-
scnprintf(sensor->name, sizeof(sensor->name), "%s_accel",
name);
break;
case ST_LSM6DSX_ID_GYRO:
- iio_dev->channels = st_lsm6dsx_gyro_channels;
- iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels);
iio_dev->info = &st_lsm6dsx_gyro_info;
-
scnprintf(sensor->name, sizeof(sensor->name), "%s_gyro",
name);
break;
--
2.21.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
2019-07-29 19:22 ` [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs Lorenzo Bianconi
@ 2019-08-02 5:35 ` Martin Kepplinger
2019-08-05 14:18 ` Jonathan Cameron
0 siblings, 1 reply; 11+ messages in thread
From: Martin Kepplinger @ 2019-08-02 5:35 UTC (permalink / raw)
To: Lorenzo Bianconi, jic23; +Cc: lorenzo.bianconi, linux-iio
On 29.07.19 21:22, Lorenzo Bianconi wrote:
> Remove output register definition and inline register value since
> they are used only for iio channel definition. This is a preliminary
> patch to add support for LSM9DS1 sensor to st_lsm6dsx driver
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++---------------
> 1 file changed, 6 insertions(+), 20 deletions(-)
>
thanks. I'm running this patchset now and will resend LSM9DS1 patches
after these are merged.
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
2019-07-29 19:22 ` [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings Lorenzo Bianconi
@ 2019-08-02 5:36 ` Martin Kepplinger
2019-08-05 14:19 ` Jonathan Cameron
0 siblings, 1 reply; 11+ messages in thread
From: Martin Kepplinger @ 2019-08-02 5:36 UTC (permalink / raw)
To: Lorenzo Bianconi, jic23; +Cc: lorenzo.bianconi, linux-iio
On 29.07.19 21:22, Lorenzo Bianconi wrote:
> Move IIO channel definitions in st_lsm6dsx_sensor_settings in order to
> support sensors with different channels maps.
> This is a preliminary patch to add support for LSM9DS1 sensor to
> st_lsm6dsx driver.
>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 96 ++++++++++++++++----
> 2 files changed, 81 insertions(+), 20 deletions(-)
thanks. I'm running this patchset now and will resend LSM9DS1 patches
after these are merged.
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
2019-07-29 19:22 ` [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Lorenzo Bianconi
@ 2019-08-05 14:17 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-08-05 14:17 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
On Mon, 29 Jul 2019 21:22:28 +0200
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Move sensor odr table in st_lsm6dsx_sensor_settings in order to support
> sensors with different odr maps. This is a preliminary patch to add
> support for LSM9DS1 sensor to st_lsm6dsx driver
>
> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 196 ++++++++++++++++---
> 2 files changed, 166 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index af379a5429ed..3a89f3f6e2c7 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -200,6 +200,7 @@ struct st_lsm6dsx_ext_dev_settings {
> * @wai: Sensor WhoAmI default value.
> * @max_fifo_size: Sensor max fifo length in FIFO words.
> * @id: List of hw id/device name supported by the driver configuration.
> + * @odr_table: Hw sensors odr table (Hz + val).
> * @decimator: List of decimator register info (addr + mask).
> * @batch: List of FIFO batching register info (addr + mask).
> * @fifo_ops: Sensor hw FIFO parameters.
> @@ -213,6 +214,7 @@ struct st_lsm6dsx_settings {
> enum st_lsm6dsx_hw_id hw_id;
> const char *name;
> } id[ST_LSM6DSX_MAX_ID];
> + struct st_lsm6dsx_odr_table_entry odr_table[2];
> struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
> struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
> struct st_lsm6dsx_fifo_ops fifo_ops;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index d8c4417cf4eb..b3c6c9792913 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -69,33 +69,6 @@
> #define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24
> #define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26
>
> -static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = {
> - [ST_LSM6DSX_ID_ACC] = {
> - .reg = {
> - .addr = 0x10,
> - .mask = GENMASK(7, 4),
> - },
> - .odr_avl[0] = { 13, 0x01 },
> - .odr_avl[1] = { 26, 0x02 },
> - .odr_avl[2] = { 52, 0x03 },
> - .odr_avl[3] = { 104, 0x04 },
> - .odr_avl[4] = { 208, 0x05 },
> - .odr_avl[5] = { 416, 0x06 },
> - },
> - [ST_LSM6DSX_ID_GYRO] = {
> - .reg = {
> - .addr = 0x11,
> - .mask = GENMASK(7, 4),
> - },
> - .odr_avl[0] = { 13, 0x01 },
> - .odr_avl[1] = { 26, 0x02 },
> - .odr_avl[2] = { 52, 0x03 },
> - .odr_avl[3] = { 104, 0x04 },
> - .odr_avl[4] = { 208, 0x05 },
> - .odr_avl[5] = { 416, 0x06 },
> - }
> -};
> -
> static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
> [ST_LSM6DSX_ID_ACC] = {
> .reg = {
> @@ -129,6 +102,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .name = ST_LSM6DS3_DEV_NAME,
> },
> },
> + .odr_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + },
> .decimator = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x08,
> @@ -179,6 +178,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .name = ST_LSM6DS3H_DEV_NAME,
> },
> },
> + .odr_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + },
> .decimator = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x08,
> @@ -238,6 +263,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .name = ST_LSM6DS3TRC_DEV_NAME,
> },
> },
> + .odr_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + },
> .decimator = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x08,
> @@ -291,6 +342,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .name = ST_LSM6DSOX_DEV_NAME,
> },
> },
> + .odr_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x09,
> @@ -359,6 +436,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .name = ST_ASM330LHH_DEV_NAME,
> },
> },
> + .odr_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x09,
> @@ -401,6 +504,32 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .name = ST_LSM6DSR_DEV_NAME,
> },
> },
> + .odr_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(7, 4),
> + },
> + .odr_avl[0] = { 13, 0x01 },
> + .odr_avl[1] = { 26, 0x02 },
> + .odr_avl[2] = { 52, 0x03 },
> + .odr_avl[3] = { 104, 0x04 },
> + .odr_avl[4] = { 208, 0x05 },
> + .odr_avl[5] = { 416, 0x06 },
> + },
> + },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x09,
> @@ -563,20 +692,22 @@ static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
>
> int st_lsm6dsx_check_odr(struct st_lsm6dsx_sensor *sensor, u16 odr, u8 *val)
> {
> + const struct st_lsm6dsx_odr_table_entry *odr_table;
> int i;
>
> + odr_table = &sensor->hw->settings->odr_table[sensor->id];
> for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
> /*
> * ext devices can run at different odr respect to
> * accel sensor
> */
> - if (st_lsm6dsx_odr_table[sensor->id].odr_avl[i].hz >= odr)
> + if (odr_table->odr_avl[i].hz >= odr)
> break;
>
> if (i == ST_LSM6DSX_ODR_LIST_SIZE)
> return -EINVAL;
>
> - *val = st_lsm6dsx_odr_table[sensor->id].odr_avl[i].val;
> + *val = odr_table->odr_avl[i].val;
>
> return 0;
> }
> @@ -641,7 +772,7 @@ static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 req_odr)
> return err;
> }
>
> - reg = &st_lsm6dsx_odr_table[ref_sensor->id].reg;
> + reg = &hw->settings->odr_table[ref_sensor->id].reg;
> data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
> return st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
> }
> @@ -786,11 +917,12 @@ st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev,
> {
> struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
> enum st_lsm6dsx_sensor_id id = sensor->id;
> + struct st_lsm6dsx_hw *hw = sensor->hw;
> int i, len = 0;
>
> for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++)
> len += scnprintf(buf + len, PAGE_SIZE - len, "%d ",
> - st_lsm6dsx_odr_table[id].odr_avl[i].hz);
> + hw->settings->odr_table[id].odr_avl[i].hz);
> buf[len - 1] = '\n';
>
> return len;
> @@ -1040,7 +1172,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
> sensor = iio_priv(iio_dev);
> sensor->id = id;
> sensor->hw = hw;
> - sensor->odr = st_lsm6dsx_odr_table[id].odr_avl[0].hz;
> + sensor->odr = hw->settings->odr_table[id].odr_avl[0].hz;
> sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain;
> sensor->watermark = 1;
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
2019-07-29 19:22 ` [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table " Lorenzo Bianconi
@ 2019-08-05 14:18 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-08-05 14:18 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: lorenzo.bianconi, linux-iio, martin.kepplinger
On Mon, 29 Jul 2019 21:22:29 +0200
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Move fs_table in st_lsm6dsx_sensor_settings in order to support
> sensors with different gain maps. This is a preliminary patch to add
> support for LSM9DS1 sensor to st_lsm6dsx driver
>
> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied,
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 175 +++++++++++++++----
> 2 files changed, 144 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index 3a89f3f6e2c7..ab1c66615d67 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -201,6 +201,7 @@ struct st_lsm6dsx_ext_dev_settings {
> * @max_fifo_size: Sensor max fifo length in FIFO words.
> * @id: List of hw id/device name supported by the driver configuration.
> * @odr_table: Hw sensors odr table (Hz + val).
> + * @fs_table: Hw sensors gain table (gain + val).
> * @decimator: List of decimator register info (addr + mask).
> * @batch: List of FIFO batching register info (addr + mask).
> * @fifo_ops: Sensor hw FIFO parameters.
> @@ -215,6 +216,7 @@ struct st_lsm6dsx_settings {
> const char *name;
> } id[ST_LSM6DSX_MAX_ID];
> struct st_lsm6dsx_odr_table_entry odr_table[2];
> + struct st_lsm6dsx_fs_table_entry fs_table[2];
> struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
> struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
> struct st_lsm6dsx_fifo_ops fifo_ops;
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index b3c6c9792913..9aa109428a52 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -69,29 +69,6 @@
> #define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24
> #define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26
>
> -static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = {
> - [ST_LSM6DSX_ID_ACC] = {
> - .reg = {
> - .addr = 0x10,
> - .mask = GENMASK(3, 2),
> - },
> - .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> - .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> - .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> - .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> - },
> - [ST_LSM6DSX_ID_GYRO] = {
> - .reg = {
> - .addr = 0x11,
> - .mask = GENMASK(3, 2),
> - },
> - .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> - .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> - .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> - .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> - }
> -};
> -
> static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> {
> .wai = 0x69,
> @@ -128,6 +105,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .odr_avl[5] = { 416, 0x06 },
> },
> },
> + .fs_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> + .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> + .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> + .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> + .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> + .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> + .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> + },
> + },
> .decimator = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x08,
> @@ -204,6 +203,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .odr_avl[5] = { 416, 0x06 },
> },
> },
> + .fs_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> + .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> + .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> + .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> + .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> + .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> + .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> + },
> + },
> .decimator = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x08,
> @@ -289,6 +310,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .odr_avl[5] = { 416, 0x06 },
> },
> },
> + .fs_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> + .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> + .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> + .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> + .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> + .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> + .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> + },
> + },
> .decimator = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x08,
> @@ -368,6 +411,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .odr_avl[5] = { 416, 0x06 },
> },
> },
> + .fs_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> + .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> + .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> + .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> + .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> + .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> + .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> + },
> + },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x09,
> @@ -462,6 +527,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .odr_avl[5] = { 416, 0x06 },
> },
> },
> + .fs_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> + .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> + .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> + .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> + .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> + .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> + .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> + },
> + },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x09,
> @@ -530,6 +617,28 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .odr_avl[5] = { 416, 0x06 },
> },
> },
> + .fs_table = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .reg = {
> + .addr = 0x10,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_G_TO_M_S_2(61), 0x0 },
> + .fs_avl[1] = { IIO_G_TO_M_S_2(122), 0x2 },
> + .fs_avl[2] = { IIO_G_TO_M_S_2(244), 0x3 },
> + .fs_avl[3] = { IIO_G_TO_M_S_2(488), 0x1 },
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .reg = {
> + .addr = 0x11,
> + .mask = GENMASK(3, 2),
> + },
> + .fs_avl[0] = { IIO_DEGREE_TO_RAD(8750), 0x0 },
> + .fs_avl[1] = { IIO_DEGREE_TO_RAD(17500), 0x1 },
> + .fs_avl[2] = { IIO_DEGREE_TO_RAD(35000), 0x2 },
> + .fs_avl[3] = { IIO_DEGREE_TO_RAD(70000), 0x3 },
> + },
> + },
> .batch = {
> [ST_LSM6DSX_ID_ACC] = {
> .addr = 0x09,
> @@ -665,23 +774,22 @@ static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw, int id,
> static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor,
> u32 gain)
> {
> - struct st_lsm6dsx_hw *hw = sensor->hw;
> - const struct st_lsm6dsx_reg *reg;
> + const struct st_lsm6dsx_fs_table_entry *fs_table;
> unsigned int data;
> int i, err;
> - u8 val;
>
> + fs_table = &sensor->hw->settings->fs_table[sensor->id];
> for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
> - if (st_lsm6dsx_fs_table[sensor->id].fs_avl[i].gain == gain)
> + if (fs_table->fs_avl[i].gain == gain)
> break;
>
> if (i == ST_LSM6DSX_FS_LIST_SIZE)
> return -EINVAL;
>
> - val = st_lsm6dsx_fs_table[sensor->id].fs_avl[i].val;
> - reg = &st_lsm6dsx_fs_table[sensor->id].reg;
> - data = ST_LSM6DSX_SHIFT_VAL(val, reg->mask);
> - err = st_lsm6dsx_update_bits_locked(hw, reg->addr, reg->mask, data);
> + data = ST_LSM6DSX_SHIFT_VAL(fs_table->fs_avl[i].val,
> + fs_table->reg.mask);
> + err = st_lsm6dsx_update_bits_locked(sensor->hw, fs_table->reg.addr,
> + fs_table->reg.mask, data);
> if (err < 0)
> return err;
>
> @@ -934,11 +1042,12 @@ static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev,
> {
> struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev));
> enum st_lsm6dsx_sensor_id id = sensor->id;
> + struct st_lsm6dsx_hw *hw = sensor->hw;
> int i, len = 0;
>
> for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++)
> len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ",
> - st_lsm6dsx_fs_table[id].fs_avl[i].gain);
> + hw->settings->fs_table[id].fs_avl[i].gain);
> buf[len - 1] = '\n';
>
> return len;
> @@ -1173,7 +1282,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
> sensor->id = id;
> sensor->hw = hw;
> sensor->odr = hw->settings->odr_table[id].odr_avl[0].hz;
> - sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain;
> + sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
> sensor->watermark = 1;
>
> switch (id) {
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs
2019-08-02 5:35 ` Martin Kepplinger
@ 2019-08-05 14:18 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-08-05 14:18 UTC (permalink / raw)
To: Martin Kepplinger; +Cc: Lorenzo Bianconi, lorenzo.bianconi, linux-iio
On Fri, 2 Aug 2019 07:35:46 +0200
Martin Kepplinger <martin.kepplinger@puri.sm> wrote:
> On 29.07.19 21:22, Lorenzo Bianconi wrote:
> > Remove output register definition and inline register value since
> > they are used only for iio channel definition. This is a preliminary
> > patch to add support for LSM9DS1 sensor to st_lsm6dsx driver
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 +++++---------------
> > 1 file changed, 6 insertions(+), 20 deletions(-)
> >
>
> thanks. I'm running this patchset now and will resend LSM9DS1 patches
> after these are merged.
>
> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
>
Nice little tidy up. Applied.
Thanks,
Jonathan
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings
2019-08-02 5:36 ` Martin Kepplinger
@ 2019-08-05 14:19 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-08-05 14:19 UTC (permalink / raw)
To: Martin Kepplinger; +Cc: Lorenzo Bianconi, lorenzo.bianconi, linux-iio
On Fri, 2 Aug 2019 07:36:03 +0200
Martin Kepplinger <martin.kepplinger@puri.sm> wrote:
> On 29.07.19 21:22, Lorenzo Bianconi wrote:
> > Move IIO channel definitions in st_lsm6dsx_sensor_settings in order to
> > support sensors with different channels maps.
> > This is a preliminary patch to add support for LSM9DS1 sensor to
> > st_lsm6dsx driver.
> >
> > Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
> > ---
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 5 +
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 96 ++++++++++++++++----
> > 2 files changed, 81 insertions(+), 20 deletions(-)
>
>
> thanks. I'm running this patchset now and will resend LSM9DS1 patches
> after these are merged.
>
> Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Applied and a particular thanks for the tested-by's.
Thanks,
Jonathan
>
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-08-05 14:19 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-29 19:22 [PATCH v2 0/4] st_lsm6dsx: move {odr,fs}_table in Lorenzo Bianconi
2019-07-29 19:22 ` [PATCH v2 1/4] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings Lorenzo Bianconi
2019-08-05 14:17 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 2/4] iio: imu: st_lsm6dsx: move fs_table " Lorenzo Bianconi
2019-08-05 14:18 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 3/4] iio: imu: st_lsm6dsx: inline output acc/gyro output regs Lorenzo Bianconi
2019-08-02 5:35 ` Martin Kepplinger
2019-08-05 14:18 ` Jonathan Cameron
2019-07-29 19:22 ` [PATCH v2 4/4] iio: imu: st_lsm6dsx: move iio chan definitions in st_lsm6dsx_sensor_settings Lorenzo Bianconi
2019-08-02 5:36 ` Martin Kepplinger
2019-08-05 14:19 ` Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.