* [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-25 19:55 ` Rich Felker
0 siblings, 0 replies; 16+ messages in thread
From: Rich Felker @ 2020-01-25 19:55 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel
Signed-off-by: Rich Felker <dalias@libc.org>
--
I've had this lying around a while and figure I should send it
upsteam; it's needed to support the onboard video on my Spectre-free
Atom S1260 server board.
---
drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 1a555f70923a..ff344313860c 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
.accelID = FB_ACCEL_MATROX_MGAG200,
.lowlevel = &matrox_G100
};
+static struct video_board vbG200eW = {
+ .maxvram = 0x800000,
+ .maxdisplayable = 0x800000,
+ .accelID = FB_ACCEL_MATROX_MGAG200,
+ .lowlevel = &matrox_G100
+};
/* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
whole 32MB */
static struct video_board vbG400 = {
@@ -1494,6 +1500,13 @@ static struct board {
MGA_G200,
&vbG200,
"MGA-G200 (PCI)"},
+ {PCI_VENDOR_ID_MATROX, 0x0532, 0xFF,
+ 0, 0,
+ DEVF_G200,
+ 250000,
+ MGA_G200,
+ &vbG200eW,
+ "MGA-G200eW (PCI)"},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF,
PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC,
DEVF_G200,
@@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {PCI_VENDOR_ID_MATROX, 0x0532,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400,
--
2.21.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-25 19:55 ` Rich Felker
@ 2020-01-26 7:17 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 16+ messages in thread
From: Greg Kroah-Hartman @ 2020-01-26 7:17 UTC (permalink / raw)
To: Rich Felker
Cc: linux-fbdev, Thomas Gleixner, dri-devel, Bartlomiej Zolnierkiewicz
On Sat, Jan 25, 2020 at 02:55:06PM -0500, Rich Felker wrote:
> Signed-off-by: Rich Felker <dalias@libc.org>
> --
I know I don't accept patches without any changelog text, don't know
about other subsystem maintainers...
greg k-h
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-26 7:17 ` Greg Kroah-Hartman
0 siblings, 0 replies; 16+ messages in thread
From: Greg Kroah-Hartman @ 2020-01-26 7:17 UTC (permalink / raw)
To: Rich Felker
Cc: linux-fbdev, Thomas Gleixner, dri-devel, Bartlomiej Zolnierkiewicz
On Sat, Jan 25, 2020 at 02:55:06PM -0500, Rich Felker wrote:
> Signed-off-by: Rich Felker <dalias@libc.org>
> --
I know I don't accept patches without any changelog text, don't know
about other subsystem maintainers...
greg k-h
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-26 7:17 ` Greg Kroah-Hartman
@ 2020-01-27 10:40 ` Geert Uytterhoeven
-1 siblings, 0 replies; 16+ messages in thread
From: Geert Uytterhoeven @ 2020-01-27 10:40 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Linux Fbdev development list, Rich Felker, Thomas Gleixner,
DRI Development, Bartlomiej Zolnierkiewicz
Hi Greg,
On Sun, Jan 26, 2020 at 8:44 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Sat, Jan 25, 2020 at 02:55:06PM -0500, Rich Felker wrote:
> > Signed-off-by: Rich Felker <dalias@libc.org>
> > --
>
> I know I don't accept patches without any changelog text, don't know
> about other subsystem maintainers...
FTR, I do, iff the one-line summary says everything that needs to be said.
What's the point in writing a full paragraph like:
Currently the foo driver does not support the bar device.
As users may want to use the bar device, it makes perfect sense
to add support for the bar device to the foo driver.
Hence add support for the bar device to the foo driver.
if this doesn't add any value on top of the one-line summary?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-27 10:40 ` Geert Uytterhoeven
0 siblings, 0 replies; 16+ messages in thread
From: Geert Uytterhoeven @ 2020-01-27 10:40 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: Linux Fbdev development list, Rich Felker, Thomas Gleixner,
DRI Development, Bartlomiej Zolnierkiewicz
Hi Greg,
On Sun, Jan 26, 2020 at 8:44 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Sat, Jan 25, 2020 at 02:55:06PM -0500, Rich Felker wrote:
> > Signed-off-by: Rich Felker <dalias@libc.org>
> > --
>
> I know I don't accept patches without any changelog text, don't know
> about other subsystem maintainers...
FTR, I do, iff the one-line summary says everything that needs to be said.
What's the point in writing a full paragraph like:
Currently the foo driver does not support the bar device.
As users may want to use the bar device, it makes perfect sense
to add support for the bar device to the foo driver.
Hence add support for the bar device to the foo driver.
if this doesn't add any value on top of the one-line summary?
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-27 10:40 ` Geert Uytterhoeven
@ 2020-01-27 11:59 ` Ville Syrjälä
-1 siblings, 0 replies; 16+ messages in thread
From: Ville Syrjälä @ 2020-01-27 11:59 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linux Fbdev development list, Rich Felker,
Bartlomiej Zolnierkiewicz, Greg Kroah-Hartman, DRI Development,
Thomas Gleixner
On Mon, Jan 27, 2020 at 11:40:24AM +0100, Geert Uytterhoeven wrote:
> Hi Greg,
>
> On Sun, Jan 26, 2020 at 8:44 AM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Sat, Jan 25, 2020 at 02:55:06PM -0500, Rich Felker wrote:
> > > Signed-off-by: Rich Felker <dalias@libc.org>
> > > --
> >
> > I know I don't accept patches without any changelog text, don't know
> > about other subsystem maintainers...
>
> FTR, I do, iff the one-line summary says everything that needs to be said.
>
> What's the point in writing a full paragraph like:
>
> Currently the foo driver does not support the bar device.
> As users may want to use the bar device, it makes perfect sense
> to add support for the bar device to the foo driver.
> Hence add support for the bar device to the foo driver.
>
> if this doesn't add any value on top of the one-line summary?
At least it allows one to reply to *something*. If there's just a
subject line you have zero quoted context for the reply apart from
the patch itself. So rather confusing if you want to comment on
the overall thing rather than on any specific changes in the diff.
The other bad commit message style I dislike is the:
"Subject: Do something...
...because whatever."
As if the subject was a part of the first sentence of the commit
message. Often makes replies even more confusing since now you
have just a part of the sentece quoted.
I do understand why new people make this mistake though; There
should probably be a more explicit indication that the first
line is the subject when editing the commit message.
--
Ville Syrjälä
Intel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-27 11:59 ` Ville Syrjälä
0 siblings, 0 replies; 16+ messages in thread
From: Ville Syrjälä @ 2020-01-27 11:59 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linux Fbdev development list, Rich Felker,
Bartlomiej Zolnierkiewicz, Greg Kroah-Hartman, DRI Development,
Thomas Gleixner
On Mon, Jan 27, 2020 at 11:40:24AM +0100, Geert Uytterhoeven wrote:
> Hi Greg,
>
> On Sun, Jan 26, 2020 at 8:44 AM Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> >
> > On Sat, Jan 25, 2020 at 02:55:06PM -0500, Rich Felker wrote:
> > > Signed-off-by: Rich Felker <dalias@libc.org>
> > > --
> >
> > I know I don't accept patches without any changelog text, don't know
> > about other subsystem maintainers...
>
> FTR, I do, iff the one-line summary says everything that needs to be said.
>
> What's the point in writing a full paragraph like:
>
> Currently the foo driver does not support the bar device.
> As users may want to use the bar device, it makes perfect sense
> to add support for the bar device to the foo driver.
> Hence add support for the bar device to the foo driver.
>
> if this doesn't add any value on top of the one-line summary?
At least it allows one to reply to *something*. If there's just a
subject line you have zero quoted context for the reply apart from
the patch itself. So rather confusing if you want to comment on
the overall thing rather than on any specific changes in the diff.
The other bad commit message style I dislike is the:
"Subject: Do something...
...because whatever."
As if the subject was a part of the first sentence of the commit
message. Often makes replies even more confusing since now you
have just a part of the sentece quoted.
I do understand why new people make this mistake though; There
should probably be a more explicit indication that the first
line is the subject when editing the commit message.
--
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-25 19:55 ` Rich Felker
@ 2020-01-27 7:36 ` Thomas Zimmermann
-1 siblings, 0 replies; 16+ messages in thread
From: Thomas Zimmermann @ 2020-01-27 7:36 UTC (permalink / raw)
To: Rich Felker, Bartlomiej Zolnierkiewicz
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 2288 bytes --]
Hi
Am 25.01.20 um 20:55 schrieb Rich Felker:
> Signed-off-by: Rich Felker <dalias@libc.org>
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.
This HW is supported by mgag200, which is maintained. Can't you use that?
Best regards
Thomas
>
> ---
> drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
> .accelID = FB_ACCEL_MATROX_MGAG200,
> .lowlevel = &matrox_G100
> };
> +static struct video_board vbG200eW = {
> + .maxvram = 0x800000,
> + .maxdisplayable = 0x800000,
> + .accelID = FB_ACCEL_MATROX_MGAG200,
> + .lowlevel = &matrox_G100
> +};
> /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
> whole 32MB */
> static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
> MGA_G200,
> &vbG200,
> "MGA-G200 (PCI)"},
> + {PCI_VENDOR_ID_MATROX, 0x0532, 0xFF,
> + 0, 0,
> + DEVF_G200,
> + 250000,
> + MGA_G200,
> + &vbG200eW,
> + "MGA-G200eW (PCI)"},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF,
> PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC,
> DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {PCI_VENDOR_ID_MATROX, 0x0532,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400,
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-27 7:36 ` Thomas Zimmermann
0 siblings, 0 replies; 16+ messages in thread
From: Thomas Zimmermann @ 2020-01-27 7:36 UTC (permalink / raw)
To: Rich Felker, Bartlomiej Zolnierkiewicz
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel
[-- Attachment #1.1.1: Type: text/plain, Size: 2288 bytes --]
Hi
Am 25.01.20 um 20:55 schrieb Rich Felker:
> Signed-off-by: Rich Felker <dalias@libc.org>
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.
This HW is supported by mgag200, which is maintained. Can't you use that?
Best regards
Thomas
>
> ---
> drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
> .accelID = FB_ACCEL_MATROX_MGAG200,
> .lowlevel = &matrox_G100
> };
> +static struct video_board vbG200eW = {
> + .maxvram = 0x800000,
> + .maxdisplayable = 0x800000,
> + .accelID = FB_ACCEL_MATROX_MGAG200,
> + .lowlevel = &matrox_G100
> +};
> /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
> whole 32MB */
> static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
> MGA_G200,
> &vbG200,
> "MGA-G200 (PCI)"},
> + {PCI_VENDOR_ID_MATROX, 0x0532, 0xFF,
> + 0, 0,
> + DEVF_G200,
> + 250000,
> + MGA_G200,
> + &vbG200eW,
> + "MGA-G200eW (PCI)"},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF,
> PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC,
> DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {PCI_VENDOR_ID_MATROX, 0x0532,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400,
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-27 7:36 ` Thomas Zimmermann
@ 2020-01-28 18:58 ` Rich Felker
-1 siblings, 0 replies; 16+ messages in thread
From: Rich Felker @ 2020-01-28 18:58 UTC (permalink / raw)
To: Thomas Zimmermann
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel,
Bartlomiej Zolnierkiewicz
On Mon, Jan 27, 2020 at 08:36:07AM +0100, Thomas Zimmermann wrote:
> Hi
>
> Am 25.01.20 um 20:55 schrieb Rich Felker:
> > Signed-off-by: Rich Felker <dalias@libc.org>
> > --
> > I've had this lying around a while and figure I should send it
> > upsteam; it's needed to support the onboard video on my Spectre-free
> > Atom S1260 server board.
>
> This HW is supported by mgag200, which is maintained. Can't you use that?
Perhaps; I wasn't aware it existed. I'll give it a try. It still might
be nice to apply my patch though since the matroxfb driver works with
it and only fails to support it because of not knowing the device id.
Rich
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-28 18:58 ` Rich Felker
0 siblings, 0 replies; 16+ messages in thread
From: Rich Felker @ 2020-01-28 18:58 UTC (permalink / raw)
To: Thomas Zimmermann
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel,
Bartlomiej Zolnierkiewicz
On Mon, Jan 27, 2020 at 08:36:07AM +0100, Thomas Zimmermann wrote:
> Hi
>
> Am 25.01.20 um 20:55 schrieb Rich Felker:
> > Signed-off-by: Rich Felker <dalias@libc.org>
> > --
> > I've had this lying around a while and figure I should send it
> > upsteam; it's needed to support the onboard video on my Spectre-free
> > Atom S1260 server board.
>
> This HW is supported by mgag200, which is maintained. Can't you use that?
Perhaps; I wasn't aware it existed. I'll give it a try. It still might
be nice to apply my patch though since the matroxfb driver works with
it and only fails to support it because of not knowing the device id.
Rich
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-28 18:58 ` Rich Felker
@ 2020-01-29 7:20 ` Thomas Zimmermann
-1 siblings, 0 replies; 16+ messages in thread
From: Thomas Zimmermann @ 2020-01-29 7:20 UTC (permalink / raw)
To: Rich Felker
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel,
Bartlomiej Zolnierkiewicz
[-- Attachment #1.1: Type: text/plain, Size: 1063 bytes --]
Hi
Am 28.01.20 um 19:58 schrieb Rich Felker:
> On Mon, Jan 27, 2020 at 08:36:07AM +0100, Thomas Zimmermann wrote:
>> Hi
>>
>> Am 25.01.20 um 20:55 schrieb Rich Felker:
>>> Signed-off-by: Rich Felker <dalias@libc.org>
>>> --
>>> I've had this lying around a while and figure I should send it
>>> upsteam; it's needed to support the onboard video on my Spectre-free
>>> Atom S1260 server board.
>>
>> This HW is supported by mgag200, which is maintained. Can't you use that?
>
> Perhaps; I wasn't aware it existed. I'll give it a try. It still might
> be nice to apply my patch though since the matroxfb driver works with
> it and only fails to support it because of not knowing the device id.
Well, I have no say about applying your patch. You can ping me however,
if mgag200 doesn't work for you.
Best regards
Thomas
>
> Rich
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-01-29 7:20 ` Thomas Zimmermann
0 siblings, 0 replies; 16+ messages in thread
From: Thomas Zimmermann @ 2020-01-29 7:20 UTC (permalink / raw)
To: Rich Felker
Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel,
Bartlomiej Zolnierkiewicz
[-- Attachment #1.1.1: Type: text/plain, Size: 1063 bytes --]
Hi
Am 28.01.20 um 19:58 schrieb Rich Felker:
> On Mon, Jan 27, 2020 at 08:36:07AM +0100, Thomas Zimmermann wrote:
>> Hi
>>
>> Am 25.01.20 um 20:55 schrieb Rich Felker:
>>> Signed-off-by: Rich Felker <dalias@libc.org>
>>> --
>>> I've had this lying around a while and figure I should send it
>>> upsteam; it's needed to support the onboard video on my Spectre-free
>>> Atom S1260 server board.
>>
>> This HW is supported by mgag200, which is maintained. Can't you use that?
>
> Perhaps; I wasn't aware it existed. I'll give it a try. It still might
> be nice to apply my patch though since the matroxfb driver works with
> it and only fails to support it because of not knowing the device id.
Well, I have no say about applying your patch. You can ping me however,
if mgag200 doesn't work for you.
Best regards
Thomas
>
> Rich
>
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
[-- Attachment #1.2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
2020-01-25 19:55 ` Rich Felker
@ 2020-03-02 15:42 ` Bartlomiej Zolnierkiewicz
-1 siblings, 0 replies; 16+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-03-02 15:42 UTC (permalink / raw)
To: Rich Felker; +Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel
On 1/25/20 8:55 PM, Rich Felker wrote:
> Signed-off-by: Rich Felker <dalias@libc.org>
Patch queued for v5.7, thanks.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.
>
> ---
> drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
> .accelID = FB_ACCEL_MATROX_MGAG200,
> .lowlevel = &matrox_G100
> };
> +static struct video_board vbG200eW = {
> + .maxvram = 0x800000,
> + .maxdisplayable = 0x800000,
> + .accelID = FB_ACCEL_MATROX_MGAG200,
> + .lowlevel = &matrox_G100
> +};
> /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
> whole 32MB */
> static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
> MGA_G200,
> &vbG200,
> "MGA-G200 (PCI)"},
> + {PCI_VENDOR_ID_MATROX, 0x0532, 0xFF,
> + 0, 0,
> + DEVF_G200,
> + 250000,
> + MGA_G200,
> + &vbG200eW,
> + "MGA-G200eW (PCI)"},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF,
> PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC,
> DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {PCI_VENDOR_ID_MATROX, 0x0532,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400,
>
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH] matroxfb: add Matrox MGA-G200eW board support
@ 2020-03-02 15:42 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 16+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2020-03-02 15:42 UTC (permalink / raw)
To: Rich Felker; +Cc: Greg Kroah-Hartman, linux-fbdev, Thomas Gleixner, dri-devel
On 1/25/20 8:55 PM, Rich Felker wrote:
> Signed-off-by: Rich Felker <dalias@libc.org>
Patch queued for v5.7, thanks.
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> --
> I've had this lying around a while and figure I should send it
> upsteam; it's needed to support the onboard video on my Spectre-free
> Atom S1260 server board.
>
> ---
> drivers/video/fbdev/matrox/matroxfb_base.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
> index 1a555f70923a..ff344313860c 100644
> --- a/drivers/video/fbdev/matrox/matroxfb_base.c
> +++ b/drivers/video/fbdev/matrox/matroxfb_base.c
> @@ -1376,6 +1376,12 @@ static struct video_board vbG200 = {
> .accelID = FB_ACCEL_MATROX_MGAG200,
> .lowlevel = &matrox_G100
> };
> +static struct video_board vbG200eW = {
> + .maxvram = 0x800000,
> + .maxdisplayable = 0x800000,
> + .accelID = FB_ACCEL_MATROX_MGAG200,
> + .lowlevel = &matrox_G100
> +};
> /* from doc it looks like that accelerator can draw only to low 16MB :-( Direct accesses & displaying are OK for
> whole 32MB */
> static struct video_board vbG400 = {
> @@ -1494,6 +1500,13 @@ static struct board {
> MGA_G200,
> &vbG200,
> "MGA-G200 (PCI)"},
> + {PCI_VENDOR_ID_MATROX, 0x0532, 0xFF,
> + 0, 0,
> + DEVF_G200,
> + 250000,
> + MGA_G200,
> + &vbG200eW,
> + "MGA-G200eW (PCI)"},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP, 0xFF,
> PCI_SS_VENDOR_ID_MATROX, PCI_SS_ID_MATROX_GENERIC,
> DEVF_G200,
> @@ -2136,6 +2149,8 @@ static const struct pci_device_id matroxfb_devices[] = {
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_PCI,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> + {PCI_VENDOR_ID_MATROX, 0x0532,
> + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G200_AGP,
> PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
> {PCI_VENDOR_ID_MATROX, PCI_DEVICE_ID_MATROX_G400,
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 16+ messages in thread