[PATCH net-next v3 0/4] net/sched: act_tunnel_key: add support for TUNNEL_DONT_FRAGMENT

[PATCH net-next v3 0/4] net/sched: act_tunnel_key: add support for TUNNEL_DONT_FRAGMENT

[Davide Caratti]

- patch 1 extends TC tunnel_key action to add support for TUNNEL_DONT_FRAGMENT 
- patch 2 extends tdc to skip tests when iproute2 support is missing
- patch 3 adds a tdc test case to verify functionality of the control plane
- patch 4 adds a net/forwarding test case to verify functionality of the data plane

v2->v3:
 - introduce new "dependsOn" property instead of extending "skip"
   (suggested by Pedro Tammela)
 - fix wrong indentation (thanks to Jakub Kicinski)

v1->v2:
 - split patchset to have test cases in separate patches (thanks to
   Pedro Tammela)
 - change TCA_TUNNEL_KEY_NO_FRAG attribute, so that it is a flag istead
   of u8 (thanks to Jakub Kicinski)
 - add missing TEST_PROGS assignment (thanks to Jakub Kicinski)


Davide Caratti (4):
  net/sched: act_tunnel_key: add support for "don't fragment"
  selftests: tc-testing: add "depends_on" property to skip tests
  selftests: tc-testing: add tunnel_key "nofrag" test case
  selftests: forwarding: add tunnel_key "nofrag" test case

 include/uapi/linux/tc_act/tc_tunnel_key.h     |   1 +
 net/sched/act_tunnel_key.c                    |   5 +
 .../testing/selftests/net/forwarding/Makefile |   1 +
 .../selftests/net/forwarding/tc_tunnel_key.sh | 161 ++++++++++++++++++
 .../creating-testcases/AddingTestCases.txt    |   2 +
 .../tc-tests/actions/tunnel_key.json          |  25 +++
 tools/testing/selftests/tc-testing/tdc.py     |  13 ++
 7 files changed, 208 insertions(+)
 create mode 100755 tools/testing/selftests/net/forwarding/tc_tunnel_key.sh

-- 
2.39.2

[PATCH net-next v3 1/4] net/sched: act_tunnel_key: add support for "don't fragment"

[Davide Caratti]

extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT.

Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
 include/uapi/linux/tc_act/tc_tunnel_key.h | 1 +
 net/sched/act_tunnel_key.c                | 5 +++++
 2 files changed, 6 insertions(+)

diff --git a/include/uapi/linux/tc_act/tc_tunnel_key.h b/include/uapi/linux/tc_act/tc_tunnel_key.h
index 49ad4033951b..37c6f612f161 100644
--- a/include/uapi/linux/tc_act/tc_tunnel_key.h
+++ b/include/uapi/linux/tc_act/tc_tunnel_key.h
@@ -34,6 +34,7 @@ enum {
 					 */
 	TCA_TUNNEL_KEY_ENC_TOS,		/* u8 */
 	TCA_TUNNEL_KEY_ENC_TTL,		/* u8 */
+	TCA_TUNNEL_KEY_NO_FRAG,		/* flag */
 	__TCA_TUNNEL_KEY_MAX,
 };
 
diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c
index 2d12d2626415..0c8aa7e686ea 100644
--- a/net/sched/act_tunnel_key.c
+++ b/net/sched/act_tunnel_key.c
@@ -420,6 +420,9 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla,
 		    nla_get_u8(tb[TCA_TUNNEL_KEY_NO_CSUM]))
 			flags &= ~TUNNEL_CSUM;
 
+		if (nla_get_flag(tb[TCA_TUNNEL_KEY_NO_FRAG]))
+			flags |= TUNNEL_DONT_FRAGMENT;
+
 		if (tb[TCA_TUNNEL_KEY_ENC_DST_PORT])
 			dst_port = nla_get_be16(tb[TCA_TUNNEL_KEY_ENC_DST_PORT]);
 
@@ -747,6 +750,8 @@ static int tunnel_key_dump(struct sk_buff *skb, struct tc_action *a,
 				   key->tp_dst)) ||
 		    nla_put_u8(skb, TCA_TUNNEL_KEY_NO_CSUM,
 			       !(key->tun_flags & TUNNEL_CSUM)) ||
+		    ((key->tun_flags & TUNNEL_DONT_FRAGMENT) &&
+		     nla_put_flag(skb, TCA_TUNNEL_KEY_NO_FRAG)) ||
 		    tunnel_key_opts_dump(skb, info))
 			goto nla_put_failure;
 
-- 
2.39.2

[PATCH net-next v3 2/4] selftests: tc-testing: add "depends_on" property to skip tests

[Davide Caratti]

currently, users can skip individual test cases by means of writing

  "skip": "yes"

in the scenario file. Extend this functionality, introducing 'dependsOn':
it's optional property like "skip", but the value contains a command (for
example, a probe on iproute2 to check if it supports a specific feature).
If such property is present, tdc executes that command and skips the test
when the return value is non-zero.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
 .../creating-testcases/AddingTestCases.txt          |  2 ++
 tools/testing/selftests/tc-testing/tdc.py           | 13 +++++++++++++
 2 files changed, 15 insertions(+)

diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
index a28571aff0e1..ff956d8c99c5 100644
--- a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
+++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
@@ -38,6 +38,8 @@ skip:         A completely optional key, if the corresponding value is "yes"
               this test case will still appear in the results output but
               marked as skipped. This key can be placed anywhere inside the
               test case at the top level.
+dependsOn:    Same as 'skip', but the value is executed as a command. The test
+              is skipped when the command returns non-zero.
 category:     A list of single-word descriptions covering what the command
               under test is testing. Example: filter, actions, u32, gact, etc.
 setup:        The list of commands required to ensure the command under test
diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py
index 7bd94f8e490a..5fa3fe644bfe 100755
--- a/tools/testing/selftests/tc-testing/tdc.py
+++ b/tools/testing/selftests/tc-testing/tdc.py
@@ -369,6 +369,19 @@ def run_one_test(pm, args, index, tidx):
             pm.call_post_execute()
             return res
 
+    if 'dependsOn' in tidx:
+        if (args.verbose > 0):
+            print('probe command for test skip')
+        (p, procout) = exec_cmd(args, pm, 'execute', tidx['dependsOn'])
+        if p:
+            if (p.returncode != 0):
+                res = TestResult(tidx['id'], tidx['name'])
+                res.set_result(ResultState.skip)
+                res.set_errormsg('probe command failed: test skipped.')
+                pm.call_pre_case(tidx, test_skip=True)
+                pm.call_post_execute()
+                return res
+
     # populate NAMES with TESTID for this test
     NAMES['TESTID'] = tidx['id']
 
-- 
2.39.2

[PATCH net-next v3 3/4] selftests: tc-testing: add tunnel_key "nofrag" test case

[Davide Caratti]

 # ./tdc.py -e 6bda -l
 6bda: (actions, tunnel_key) Add tunnel_key action with nofrag option

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
 .../tc-tests/actions/tunnel_key.json          | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
index b40ee602918a..b5b47fbf6c00 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
@@ -983,5 +983,30 @@
         "teardown": [
             "$TC actions flush action tunnel_key"
         ]
+    },
+    {
+        "id": "6bda",
+        "name": "Add tunnel_key action with nofrag option",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "dependsOn": "$TC actions add action tunnel_key help 2>&1 | grep -q nofrag",
+        "setup": [
+            [
+                "$TC action flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 1111 nofrag index 222",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 222",
+        "matchPattern": "action order [0-9]+: tunnel_key.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 1111.*csum.*nofrag pipe.*index 222",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
     }
 ]
-- 
2.39.2

[PATCH net-next v3 4/4] selftests: forwarding: add tunnel_key "nofrag" test case

[Davide Caratti]

Add a selftest that configures metadata tunnel encapsulation using the TC
"tunnel_key" action: it includes a test case for setting "nofrag" flag.

Example output:

 # selftests: net/forwarding: tc_tunnel_key.sh
 # TEST: tunnel_key nofrag (skip_hw)                                   [ OK ]
 # INFO: Could not test offloaded functionality
 ok 1 selftests: net/forwarding: tc_tunnel_key.sh

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
 .../testing/selftests/net/forwarding/Makefile |   1 +
 .../selftests/net/forwarding/tc_tunnel_key.sh | 161 ++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100755 tools/testing/selftests/net/forwarding/tc_tunnel_key.sh

diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 91201ab3c4fc..236f6b796a52 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -85,6 +85,7 @@ TEST_PROGS = bridge_igmp.sh \
 	tc_mpls_l2vpn.sh \
 	tc_police.sh \
 	tc_shblocks.sh \
+	tc_tunnel_key.sh \
 	tc_vlan_modify.sh \
 	vxlan_asymmetric_ipv6.sh \
 	vxlan_asymmetric.sh \
diff --git a/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
new file mode 100755
index 000000000000..5ac184d51809
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/tc_tunnel_key.sh
@@ -0,0 +1,161 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+ALL_TESTS="tunnel_key_nofrag_test"
+
+NUM_NETIFS=4
+source tc_common.sh
+source lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+	forwarding_enable
+	mtu_set $h1 1500
+	tunnel_create h1-et vxlan 192.0.2.1 192.0.2.2 dev $h1 dstport 0 external
+	tc qdisc add dev h1-et clsact
+	mtu_set h1-et 1230
+	mtu_restore $h1
+	mtu_set $h1 1000
+}
+
+h1_destroy()
+{
+	tc qdisc del dev h1-et clsact
+	tunnel_destroy h1-et
+	forwarding_restore
+	mtu_restore $h1
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/24
+	tc qdisc add dev $swp1 clsact
+	simple_if_init $swp2 192.0.2.1/24
+}
+
+switch_destroy()
+{
+	simple_if_fini $swp2 192.0.2.1/24
+	tc qdisc del dev $swp1 clsact
+	simple_if_fini $swp1 192.0.2.2/24
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	swp1origmac=$(mac_get $swp1)
+	swp2origmac=$(mac_get $swp2)
+	ip link set $swp1 address $h2mac
+	ip link set $swp2 address $h1mac
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+
+	if ! tc action add action tunnel_key help 2>&1 | grep -q nofrag; then
+		log_test "SKIP: iproute doesn't support nofrag"
+		exit $ksft_skip
+	fi
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+
+	ip link set $swp2 address $swp2origmac
+	ip link set $swp1 address $swp1origmac
+}
+
+tunnel_key_nofrag_test()
+{
+	RET=0
+	local i
+
+	tc filter add dev $swp1 ingress protocol ip pref 100 handle 100 \
+		flower ip_flags nofrag action drop
+	tc filter add dev $swp1 ingress protocol ip pref 101 handle 101 \
+		flower ip_flags firstfrag action drop
+	tc filter add dev $swp1 ingress protocol ip pref 102 handle 102 \
+		flower ip_flags nofirstfrag action drop
+
+	# test 'nofrag' set
+	tc filter add dev h1-et egress protocol all pref 1 handle 1 matchall $tcflags \
+		action tunnel_key set src_ip 192.0.2.1 dst_ip 192.0.2.2 id 42 nofrag index 10
+	$MZ h1-et -c 1 -p 930 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q
+	tc_check_packets "dev $swp1 ingress" 100 1
+	check_err $? "packet smaller than MTU was not tunneled"
+
+	$MZ h1-et -c 1 -p 931 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q
+	tc_check_packets "dev $swp1 ingress" 100 1
+	check_err $? "packet bigger than MTU matched nofrag (nofrag was set)"
+	tc_check_packets "dev $swp1 ingress" 101 0
+	check_err $? "packet bigger than MTU matched firstfrag (nofrag was set)"
+	tc_check_packets "dev $swp1 ingress" 102 0
+	check_err $? "packet bigger than MTU matched nofirstfrag (nofrag was set)"
+
+	# test 'nofrag' cleared
+	tc actions change action tunnel_key set src_ip 192.0.2.1 dst_ip 192.0.2.2 id 42 index 10
+	$MZ h1-et -c 1 -p 931 -a 00:aa:bb:cc:dd:ee -b 00:ee:dd:cc:bb:aa -t ip -q
+	tc_check_packets "dev $swp1  ingress" 100 1
+	check_err $? "packet bigger than MTU matched nofrag (nofrag was unset)"
+	tc_check_packets "dev $swp1  ingress" 101 1
+	check_err $? "packet bigger than MTU didn't match firstfrag (nofrag was unset) "
+	tc_check_packets "dev $swp1 ingress" 102 1
+	check_err $? "packet bigger than MTU didn't match nofirstfrag (nofrag was unset) "
+
+	for i in 100 101 102; do
+		tc filter del dev $swp1 ingress protocol ip pref $i handle $i flower
+	done
+	tc filter del dev h1-et egress pref 1 handle 1 matchall
+
+	log_test "tunnel_key nofrag ($tcflags)"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+tc_offload_check
+if [[ $? -ne 0 ]]; then
+	log_info "Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
-- 
2.39.2

Re: [PATCH net-next v3 2/4] selftests: tc-testing: add "depends_on" property to skip tests

[Pedro Tammela]

On 28/03/2023 13:45, Davide Caratti wrote:
> currently, users can skip individual test cases by means of writing
> 
>    "skip": "yes"
> 
> in the scenario file. Extend this functionality, introducing 'dependsOn':
> it's optional property like "skip", but the value contains a command (for
> example, a probe on iproute2 to check if it supports a specific feature).
> If such property is present, tdc executes that command and skips the test
> when the return value is non-zero.
> 
> Signed-off-by: Davide Caratti <dcaratti@redhat.com>
> ---
>   .../creating-testcases/AddingTestCases.txt          |  2 ++
>   tools/testing/selftests/tc-testing/tdc.py           | 13 +++++++++++++
>   2 files changed, 15 insertions(+)
> 
> diff --git a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
> index a28571aff0e1..ff956d8c99c5 100644
> --- a/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
> +++ b/tools/testing/selftests/tc-testing/creating-testcases/AddingTestCases.txt
> @@ -38,6 +38,8 @@ skip:         A completely optional key, if the corresponding value is "yes"
>                 this test case will still appear in the results output but
>                 marked as skipped. This key can be placed anywhere inside the
>                 test case at the top level.
> +dependsOn:    Same as 'skip', but the value is executed as a command. The test
> +              is skipped when the command returns non-zero.
>   category:     A list of single-word descriptions covering what the command
>                 under test is testing. Example: filter, actions, u32, gact, etc.
>   setup:        The list of commands required to ensure the command under test
> diff --git a/tools/testing/selftests/tc-testing/tdc.py b/tools/testing/selftests/tc-testing/tdc.py
> index 7bd94f8e490a..5fa3fe644bfe 100755
> --- a/tools/testing/selftests/tc-testing/tdc.py
> +++ b/tools/testing/selftests/tc-testing/tdc.py
> @@ -369,6 +369,19 @@ def run_one_test(pm, args, index, tidx):
>               pm.call_post_execute()
>               return res
>   
> +    if 'dependsOn' in tidx:
> +        if (args.verbose > 0):
> +            print('probe command for test skip')
> +        (p, procout) = exec_cmd(args, pm, 'execute', tidx['dependsOn'])
> +        if p:
> +            if (p.returncode != 0):
> +                res = TestResult(tidx['id'], tidx['name'])
> +                res.set_result(ResultState.skip)
> +                res.set_errormsg('probe command failed: test skipped.')

'probe command: test skipped'

> +                pm.call_pre_case(tidx, test_skip=True)
> +                pm.call_post_execute()
> +                return res
> +
>       # populate NAMES with TESTID for this test
>       NAMES['TESTID'] = tidx['id']
>   

Other than the above, LGTM.

Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>

Re: [PATCH net-next v3 1/4] net/sched: act_tunnel_key: add support for "don't fragment"

[Pedro Tammela]

On 28/03/2023 13:45, Davide Caratti wrote:
> extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT.
> 
> Suggested-by: Ilya Maximets <i.maximets@ovn.org>
> Signed-off-by: Davide Caratti <dcaratti@redhat.com>
> ---
>   include/uapi/linux/tc_act/tc_tunnel_key.h | 1 +
>   net/sched/act_tunnel_key.c                | 5 +++++
>   2 files changed, 6 insertions(+)
> 
> diff --git a/include/uapi/linux/tc_act/tc_tunnel_key.h b/include/uapi/linux/tc_act/tc_tunnel_key.h
> index 49ad4033951b..37c6f612f161 100644
> --- a/include/uapi/linux/tc_act/tc_tunnel_key.h
> +++ b/include/uapi/linux/tc_act/tc_tunnel_key.h
> @@ -34,6 +34,7 @@ enum {
>   					 */
>   	TCA_TUNNEL_KEY_ENC_TOS,		/* u8 */
>   	TCA_TUNNEL_KEY_ENC_TTL,		/* u8 */
> +	TCA_TUNNEL_KEY_NO_FRAG,		/* flag */
>   	__TCA_TUNNEL_KEY_MAX,
>   };
>   
> diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c
> index 2d12d2626415..0c8aa7e686ea 100644
> --- a/net/sched/act_tunnel_key.c
> +++ b/net/sched/act_tunnel_key.c
> @@ -420,6 +420,9 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla,
>   		    nla_get_u8(tb[TCA_TUNNEL_KEY_NO_CSUM]))
>   			flags &= ~TUNNEL_CSUM;
>   
> +		if (nla_get_flag(tb[TCA_TUNNEL_KEY_NO_FRAG]))
> +			flags |= TUNNEL_DONT_FRAGMENT;
> +
>   		if (tb[TCA_TUNNEL_KEY_ENC_DST_PORT])
>   			dst_port = nla_get_be16(tb[TCA_TUNNEL_KEY_ENC_DST_PORT]);
>   
> @@ -747,6 +750,8 @@ static int tunnel_key_dump(struct sk_buff *skb, struct tc_action *a,
>   				   key->tp_dst)) ||
>   		    nla_put_u8(skb, TCA_TUNNEL_KEY_NO_CSUM,
>   			       !(key->tun_flags & TUNNEL_CSUM)) ||
> +		    ((key->tun_flags & TUNNEL_DONT_FRAGMENT) &&
> +		     nla_put_flag(skb, TCA_TUNNEL_KEY_NO_FRAG)) ||
>   		    tunnel_key_opts_dump(skb, info))
>   			goto nla_put_failure;
>   

LGTM,

Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>

Re: [PATCH net-next v3 1/4] net/sched: act_tunnel_key: add support for "don't fragment"

[Jamal Hadi Salim]

Try 2 (some silly spam filter blocked earlier email)

On Tue, Mar 28, 2023 at 12:45 PM Davide Caratti <dcaratti@redhat.com> wrote:
>
> extend "act_tunnel_key" to allow specifying TUNNEL_DONT_FRAGMENT.
>
> Suggested-by: Ilya Maximets <i.maximets@ovn.org>
> Signed-off-by: Davide Caratti <dcaratti@redhat.com>


Acked-by: Jamal  Hadi Salim <jhs@mojatatu.com>

cheers,
jamal

>
> ---
>  include/uapi/linux/tc_act/tc_tunnel_key.h | 1 +
>  net/sched/act_tunnel_key.c                | 5 +++++
>  2 files changed, 6 insertions(+)
>
> diff --git a/include/uapi/linux/tc_act/tc_tunnel_key.h b/include/uapi/linux/tc_act/tc_tunnel_key.h
> index 49ad4033951b..37c6f612f161 100644
> --- a/include/uapi/linux/tc_act/tc_tunnel_key.h
> +++ b/include/uapi/linux/tc_act/tc_tunnel_key.h
> @@ -34,6 +34,7 @@ enum {
>                                          */
>         TCA_TUNNEL_KEY_ENC_TOS,         /* u8 */
>         TCA_TUNNEL_KEY_ENC_TTL,         /* u8 */
> +       TCA_TUNNEL_KEY_NO_FRAG,         /* flag */
>         __TCA_TUNNEL_KEY_MAX,
>  };
>
> diff --git a/net/sched/act_tunnel_key.c b/net/sched/act_tunnel_key.c
> index 2d12d2626415..0c8aa7e686ea 100644
> --- a/net/sched/act_tunnel_key.c
> +++ b/net/sched/act_tunnel_key.c
> @@ -420,6 +420,9 @@ static int tunnel_key_init(struct net *net, struct nlattr *nla,
>                     nla_get_u8(tb[TCA_TUNNEL_KEY_NO_CSUM]))
>                         flags &= ~TUNNEL_CSUM;
>
> +               if (nla_get_flag(tb[TCA_TUNNEL_KEY_NO_FRAG]))
> +                       flags |= TUNNEL_DONT_FRAGMENT;
> +
>                 if (tb[TCA_TUNNEL_KEY_ENC_DST_PORT])
>                         dst_port = nla_get_be16(tb[TCA_TUNNEL_KEY_ENC_DST_PORT]);
>
> @@ -747,6 +750,8 @@ static int tunnel_key_dump(struct sk_buff *skb, struct tc_action *a,
>                                    key->tp_dst)) ||
>                     nla_put_u8(skb, TCA_TUNNEL_KEY_NO_CSUM,
>                                !(key->tun_flags & TUNNEL_CSUM)) ||
> +                   ((key->tun_flags & TUNNEL_DONT_FRAGMENT) &&
> +                    nla_put_flag(skb, TCA_TUNNEL_KEY_NO_FRAG)) ||
>                     tunnel_key_opts_dump(skb, info))
>                         goto nla_put_failure;
>
> --
> 2.39.2
>

Re: [PATCH net-next v3 3/4] selftests: tc-testing: add tunnel_key "nofrag" test case

[Jamal Hadi Salim]

On Tue, Mar 28, 2023 at 12:45 PM Davide Caratti <dcaratti@redhat.com> wrote:
>
>  # ./tdc.py -e 6bda -l
>  6bda: (actions, tunnel_key) Add tunnel_key action with nofrag option
>
> Signed-off-by: Davide Caratti <dcaratti@redhat.com>

Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>

cheers,
jamal

> ---
>  .../tc-tests/actions/tunnel_key.json          | 25 +++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
> index b40ee602918a..b5b47fbf6c00 100644
> --- a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
> +++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
> @@ -983,5 +983,30 @@
>          "teardown": [
>              "$TC actions flush action tunnel_key"
>          ]
> +    },
> +    {
> +        "id": "6bda",
> +        "name": "Add tunnel_key action with nofrag option",
> +        "category": [
> +            "actions",
> +            "tunnel_key"
> +        ],
> +        "dependsOn": "$TC actions add action tunnel_key help 2>&1 | grep -q nofrag",
> +        "setup": [
> +            [
> +                "$TC action flush action tunnel_key",
> +                0,
> +                1,
> +                255
> +            ]
> +        ],
> +        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 1111 nofrag index 222",
> +        "expExitCode": "0",
> +        "verifyCmd": "$TC actions get action tunnel_key index 222",
> +        "matchPattern": "action order [0-9]+: tunnel_key.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 1111.*csum.*nofrag pipe.*index 222",
> +        "matchCount": "1",
> +        "teardown": [
> +            "$TC actions flush action tunnel_key"
> +        ]
>      }
>  ]
> --
> 2.39.2
>