* [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
@ 2020-01-12 22:06 Filipe Laíns
2020-01-14 11:03 ` Benjamin Tissoires
0 siblings, 1 reply; 3+ messages in thread
From: Filipe Laíns @ 2020-01-12 22:06 UTC (permalink / raw)
To: Jiri Kosina, Benjamin Tissoires, linux-input, linux-kernel
Cc: Filipe Laíns
The Logitech G Powerplay has a lightspeed receiver with a static HID++
device with ID 7 attached to it to. It is used to configure the led on
the mat. For this reason I increased the max number of devices.
I also marked all lightspeed devices as HID++ compatible. As the
internal powerplay device does not have REPORT_TYPE_KEYBOARD or
REPORT_TYPE_MOUSE it was not being marked as HID++ compatible in
logi_hidpp_dev_conn_notif_equad.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
---
drivers/hid/hid-logitech-dj.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index bb50d6e7745b..732380b55b15 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -16,11 +16,11 @@
#include <asm/unaligned.h>
#include "hid-ids.h"
-#define DJ_MAX_PAIRED_DEVICES 6
+#define DJ_MAX_PAIRED_DEVICES 7
#define DJ_MAX_NUMBER_NOTIFS 8
#define DJ_RECEIVER_INDEX 0
#define DJ_DEVICE_INDEX_MIN 1
-#define DJ_DEVICE_INDEX_MAX 6
+#define DJ_DEVICE_INDEX_MAX 7
#define DJREPORT_SHORT_LENGTH 15
#define DJREPORT_LONG_LENGTH 32
@@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
case 0x0c:
device_type = "eQUAD Lightspeed 1";
logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
- workitem.reports_supported |= STD_KEYBOARD;
+ workitem.reports_supported |= STD_KEYBOARD | HIDPP;
break;
case 0x0d:
device_type = "eQUAD Lightspeed 1_1";
@@ -1850,6 +1850,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
.driver_data = recvr_type_gaming_hidpp},
+ { /* Logitech powerplay mat/receiver (0xc539) */
+ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+ 0xc53a),
+ .driver_data = recvr_type_gaming_hidpp},
{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
.driver_data = recvr_type_27mhz},
--
2.24.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
2020-01-14 11:03 ` Benjamin Tissoires
@ 2020-01-14 1:10 ` Filipe Laíns
0 siblings, 0 replies; 3+ messages in thread
From: Filipe Laíns @ 2020-01-14 1:10 UTC (permalink / raw)
To: Benjamin Tissoires; +Cc: Jiri Kosina, open list:HID CORE LAYER, lkml
[-- Attachment #1: Type: text/plain, Size: 3748 bytes --]
On Tue, 2020-01-14 at 21:03 +1000, Benjamin Tissoires wrote:
> Hi Filipe,
>
> On Mon, Jan 13, 2020 at 8:07 AM Filipe Laíns <lains@archlinux.org> wrote:
> > The Logitech G Powerplay has a lightspeed receiver with a static HID++
> > device with ID 7 attached to it to. It is used to configure the led on
> > the mat. For this reason I increased the max number of devices.
> >
> > I also marked all lightspeed devices as HID++ compatible. As the
> > internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> > REPORT_TYPE_MOUSE it was not being marked as HID++ compatible in
> > logi_hidpp_dev_conn_notif_equad.
> >
> > Signed-off-by: Filipe Laíns <lains@archlinux.org>
> > ---
> > drivers/hid/hid-logitech-dj.c | 10 +++++++---
> > 1 file changed, 7 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> > index bb50d6e7745b..732380b55b15 100644
> > --- a/drivers/hid/hid-logitech-dj.c
> > +++ b/drivers/hid/hid-logitech-dj.c
> > @@ -16,11 +16,11 @@
> > #include <asm/unaligned.h>
> > #include "hid-ids.h"
> >
> > -#define DJ_MAX_PAIRED_DEVICES 6
> > +#define DJ_MAX_PAIRED_DEVICES 7
> > #define DJ_MAX_NUMBER_NOTIFS 8
> > #define DJ_RECEIVER_INDEX 0
> > #define DJ_DEVICE_INDEX_MIN 1
> > -#define DJ_DEVICE_INDEX_MAX 6
> > +#define DJ_DEVICE_INDEX_MAX 7
> >
> > #define DJREPORT_SHORT_LENGTH 15
> > #define DJREPORT_LONG_LENGTH 32
> > @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
> > case 0x0c:
> > device_type = "eQUAD Lightspeed 1";
> > logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
> > - workitem.reports_supported |= STD_KEYBOARD;
> > + workitem.reports_supported |= STD_KEYBOARD | HIDPP;
>
> This feels wrong. The whole initial code was hack-ish, and now this is
> even more hack-ish.
>
> I don't have a simple solution right now (at a conference this week),
> but I will need to be convinced this is the only sane solution :/
>
> Cheers,
> Benjamin
Yeah, I understand. I just addressed this in a reply to the previous
patch:
On Tue, 2020-01-14 at 00:55 +0000, Filipe Laíns wrote:
> Okay, then is maybe better if I add HIDPP to reports_supported based
> on
> the device ID (7). This is the only product to my knowledge that
> exports a device with ID 7. It's a better solution than setting HIDPP
> on all lightspeed devices.
>
> I will send a new patch if you agree with this approach.
What do you think?
Maybe we will have to rework the driver but the method I proposed above
doesn't seem that hack-ish, at least considering the current code :P
> > break;
> > case 0x0d:
> > device_type = "eQUAD Lightspeed 1_1";
> > @@ -1850,6 +1850,10 @@ static const struct hid_device_id
> > logi_dj_receivers[] = {
> > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1
> > ),
> > .driver_data = recvr_type_gaming_hidpp},
> > + { /* Logitech powerplay mat/receiver (0xc539) */
> > + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > + 0xc53a),
> > + .driver_data = recvr_type_gaming_hidpp},
> > { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> > HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> > USB_DEVICE_ID_MX3000_RECEIVER),
> > .driver_data = recvr_type_27mhz},
> > --
> > 2.24.1
> >
--
Filipe Laíns
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver
2020-01-12 22:06 [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver Filipe Laíns
@ 2020-01-14 11:03 ` Benjamin Tissoires
2020-01-14 1:10 ` Filipe Laíns
0 siblings, 1 reply; 3+ messages in thread
From: Benjamin Tissoires @ 2020-01-14 11:03 UTC (permalink / raw)
To: Filipe Laíns; +Cc: Jiri Kosina, open list:HID CORE LAYER, lkml
Hi Filipe,
On Mon, Jan 13, 2020 at 8:07 AM Filipe Laíns <lains@archlinux.org> wrote:
>
> The Logitech G Powerplay has a lightspeed receiver with a static HID++
> device with ID 7 attached to it to. It is used to configure the led on
> the mat. For this reason I increased the max number of devices.
>
> I also marked all lightspeed devices as HID++ compatible. As the
> internal powerplay device does not have REPORT_TYPE_KEYBOARD or
> REPORT_TYPE_MOUSE it was not being marked as HID++ compatible in
> logi_hidpp_dev_conn_notif_equad.
>
> Signed-off-by: Filipe Laíns <lains@archlinux.org>
> ---
> drivers/hid/hid-logitech-dj.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
> index bb50d6e7745b..732380b55b15 100644
> --- a/drivers/hid/hid-logitech-dj.c
> +++ b/drivers/hid/hid-logitech-dj.c
> @@ -16,11 +16,11 @@
> #include <asm/unaligned.h>
> #include "hid-ids.h"
>
> -#define DJ_MAX_PAIRED_DEVICES 6
> +#define DJ_MAX_PAIRED_DEVICES 7
> #define DJ_MAX_NUMBER_NOTIFS 8
> #define DJ_RECEIVER_INDEX 0
> #define DJ_DEVICE_INDEX_MIN 1
> -#define DJ_DEVICE_INDEX_MAX 6
> +#define DJ_DEVICE_INDEX_MAX 7
>
> #define DJREPORT_SHORT_LENGTH 15
> #define DJREPORT_LONG_LENGTH 32
> @@ -971,7 +971,7 @@ static void logi_hidpp_recv_queue_notif(struct hid_device *hdev,
> case 0x0c:
> device_type = "eQUAD Lightspeed 1";
> logi_hidpp_dev_conn_notif_equad(hdev, hidpp_report, &workitem);
> - workitem.reports_supported |= STD_KEYBOARD;
> + workitem.reports_supported |= STD_KEYBOARD | HIDPP;
This feels wrong. The whole initial code was hack-ish, and now this is
even more hack-ish.
I don't have a simple solution right now (at a conference this week),
but I will need to be convinced this is the only sane solution :/
Cheers,
Benjamin
> break;
> case 0x0d:
> device_type = "eQUAD Lightspeed 1_1";
> @@ -1850,6 +1850,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
> .driver_data = recvr_type_gaming_hidpp},
> + { /* Logitech powerplay mat/receiver (0xc539) */
> + HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> + 0xc53a),
> + .driver_data = recvr_type_gaming_hidpp},
> { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
> HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
> .driver_data = recvr_type_27mhz},
> --
> 2.24.1
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-01-14 1:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-12 22:06 [PATCH v2] HID: logitech-hidpp: add support for the Powerplay mat/receiver Filipe Laíns
2020-01-14 11:03 ` Benjamin Tissoires
2020-01-14 1:10 ` Filipe Laíns
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.