[PATCH v3 3/8] iio: magnetometer: yas530: Correct scaling of magnetic axes

[Jakob Hauser <jahau@rocketmail.com>]

Looks like YAS530 raw values return picotesla and YAS532 nanotesla. Adapt
comments and scaling.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 drivers/iio/magnetometer/yamaha-yas530.c | 28 +++++++++++++++---------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/magnetometer/yamaha-yas530.c b/drivers/iio/magnetometer/yamaha-yas530.c
index 2799ae0784fd..bd43b2555b73 100644
--- a/drivers/iio/magnetometer/yamaha-yas530.c
+++ b/drivers/iio/magnetometer/yamaha-yas530.c
@@ -310,8 +310,6 @@ static s32 yas5xx_linearize(struct yas5xx *yas5xx, u16 val, int axis)
  * @yo: Y axis out
  * @zo: Z axis out
  * @return: 0 on success or error code
- *
- * Returned values are in nanotesla according to some code.
  */
 static int yas5xx_get_measure(struct yas5xx *yas5xx, s32 *to, s32 *xo, s32 *yo, s32 *zo)
 {
@@ -417,14 +415,24 @@ static int yas5xx_read_raw(struct iio_dev *indio_dev,
 			*val = 1;
 			return IIO_VAL_INT;
 		}
-		/*
-		 * The axis values are in nanotesla according to the vendor
-		 * drivers, but is clearly in microtesla according to
-		 * experiments. Since 1 uT = 0.01 Gauss, we need to divide
-		 * by 100000000 (10^8) to get to Gauss from the raw value.
-		 */
-		*val = 1;
-		*val2 = 100000000;
+		switch (yas5xx->devid) {
+		case YAS530_DEVICE_ID:
+			/*
+			 * Raw values of YAS530 are in picotesla. Divide by
+			 * 100000000 (10^8) to get Gauss.
+			 */
+			*val = 1;
+			*val2 = 100000000;
+			break;
+		case YAS532_DEVICE_ID:
+			/*
+			 * Raw values of YAS532 are in nanotesla. Divide by
+			 * 100000 (10^5) to get Gauss.
+			 */
+			*val = 1;
+			*val2 = 100000;
+			break;
+		}
 		return IIO_VAL_FRACTIONAL;
 	default:
 		/* Unknown request */
-- 
2.35.1