Re: [PATCH 10/12] arm64: dts: rockchip: rk3568-evb: Enable VOP2 and hdmi

[Michael Riesch <michael.riesch@wolfvision.net>]

Hi Sascha,

On 11/17/21 3:33 PM, Sascha Hauer wrote:
> This enabled the VOP2 display controller along with hdmi and the
> required port routes which is enough to get a picture out of the
> hdmi port of the board.
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>   .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 24 +++++++++++++++++++
>   1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> index 184e2aa2416af..156e001492173 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> @@ -106,6 +106,12 @@ &gmac1m1_rgmii_clk
>   	status = "okay";
>   };
>   
> +&hdmi {
> +	status = "okay";
> +	avdd-0v9-supply = <&vdda0v9_image>;
> +	avdd-1v8-supply = <&vcca1v8_image>;
> +};
> +
>   &i2c0 {
>   	status = "okay";
>   
> @@ -390,3 +396,21 @@ &sdmmc0 {
>   &uart2 {
>   	status = "okay";
>   };
> +
> +&vop {
> +	status = "okay";
> +	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
> +	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
> +};
> +
> +&vop_mmu {
> +	status = "okay";
> +};
> +
> +&hdmi_in_vp0 {
> +	status = "okay";
> +};

Minor nitpick: This should probably be sorted alphabetically.

Best regards,
Michael

> +
> +&vp0_out_hdmi {
> +	status = "okay";
> +};
>