* [U-Boot] [PATCH] CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate table
@ 2016-08-20 21:52 Tom Rini
2016-09-27 16:25 ` Stefan Roese
0 siblings, 1 reply; 2+ messages in thread
From: Tom Rini @ 2016-08-20 21:52 UTC (permalink / raw)
To: u-boot
This board is getting close to or exceeding the size limit again, remove
CONFIG_AUTO_COMPLETE to save space and while in here switch to the
default and slightly less complete default baudrate table.
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
include/configs/CPCI4052.h | 7 -------
1 file changed, 7 deletions(-)
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index ffae107a9a83..e88d8bbba7d1 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -98,8 +98,6 @@
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
-#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
-
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
@@ -111,11 +109,6 @@
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
#define CONFIG_SYS_BASE_BAUD 691200
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
- 57600, 115200, 230400, 460800, 921600 }
-
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [U-Boot] [PATCH] CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate table
2016-08-20 21:52 [U-Boot] [PATCH] CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate table Tom Rini
@ 2016-09-27 16:25 ` Stefan Roese
0 siblings, 0 replies; 2+ messages in thread
From: Stefan Roese @ 2016-09-27 16:25 UTC (permalink / raw)
To: u-boot
On 20.08.2016 23:52, Tom Rini wrote:
> This board is getting close to or exceeding the size limit again, remove
> CONFIG_AUTO_COMPLETE to save space and while in here switch to the
> default and slightly less complete default baudrate table.
>
> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>
Applied to u-boot-ppc4xx/master.
Thanks,
Stefan
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-27 16:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-08-20 21:52 [U-Boot] [PATCH] CPCI4052: Remove CONFIG_AUTO_COMPLETE and custom baud rate table Tom Rini
2016-09-27 16:25 ` Stefan Roese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.