* [U-Boot] Issue with relocating code to DDR
@ 2018-11-01 13:44 SHEKHAR SINGH
2018-11-05 5:00 ` Heiko Schocher
2018-11-08 12:16 ` SHEKHAR SINGH
0 siblings, 2 replies; 4+ messages in thread
From: SHEKHAR SINGH @ 2018-11-01 13:44 UTC (permalink / raw)
To: u-boot
Hi All,
I am new to U-boot. Currently, I am working on developing U-boot for a new
SOC. The SOC has arm926ej-s as the core and is implemented on Xilinx FPGA
with SD-card as the boot device. With current setup DDR is already
initialized by FPGA and SD card can be accessed using direct addressing. We
have added board files and SoC related files to the Uboot directory and is
able to successfully compile and get some outputs on UART (debug console).
Currently, we have added only support for GPIO and UART drivers.
SD Card : 0x00000000 - 0x007FFFFF
SRAM : 0x90000000 - 0x90007FFF
DDR : 0x40000000 - 0x43FFFFFF
We are facing some issue with the uboot booting. We are able to see the
initial uboot prints and debug prints when the stack pointer is in SRAM,
but after we relocate the code from SD card to DDR and change the stack
pointer to DDR we are getting junk prints on the console. Can anyone help
me or suggest me what we are doing wrong here? Thanks in advance for your
help.
Please see the below UART Log:
initcall: 00005cdc
initcall: 00009a84
initcall: 00005ccc
initcall: 00005fbc
initcall: 000060c0
initcall: 00000418
initcall: 00006090
initcall: 00005fb4
malloc_simple: size=18, ptr=18, limit=400: 90000b30
malloc_simple: size=54, ptr=6c, limit=400: 90000b48
malloc_simple: size=4, ptr=70, limit=400: 90000b9c
uclass_find_device_by_seq: 0 -1
uclass_find_device_by_seq: 0 0
- -1 -1 'root_driver'
- not found
initcall: 00006088
initcall: 000010b0
initcall: 000004a8
initcall: 0000f77c
env_init: Environment nowhere init done (ret=0)
initcall: 00005f88
initcall: 0000f0dc
initcall: 000147c0
U-Boot 2018.09 (Nov 01 2018 - 18:33:40 +0530)
initcall: 00005eac
U-Boot code: 00000000 -> 00024604 BSS: -> 00030608
initcall: 00000438
CPU: SoC Version 0.01
CPU clock: 75MHz
SDRAM clock: 75MHz
initcall: 00006470
initcall: 00005f70
DRAM: initcall: 000010ec
SDRAM Reg 000 : ffffffff
EDAC Reg 004 : ffffffff
SDRAM Reg 100 : ffffffff
EDAC Reg 104 : ffffffff
EMC Reg : 1ff
initcall: 00006178
Monitor len: 00030608
Ram size: 04000000
gd->relocaddr : 44000000
Ram top: 44000000
initcall: 00005cfc
initcall: 00006098
initcall: 00005d14
initcall: 000060a0
initcall: 00005e44
Reserving 193k for U-Boot at: 43fcf000
initcall: 00005e18
Reserving 1152k for malloc() at: 43eaf000
initcall: 00005f1c
Reserving 80 Bytes for Board Info at: 43eaefb0
initcall: 000060a8
initcall: 00005de4
Reserving 200 Bytes for Global Data at: 43eaeee8
initcall: 00005d5c
initcall: 000060b0
initcall: 000060c8
initcall: 000061f4
gd->relocaddr : 43FCF000
initcall: 00005d1c
initcall: 000060dc
RAM Configuration:
Bank #0: 40000000 64 MiB
DRAM: 64 MiB
initcall: 00005d40
New Stack Pointer is: 43eaeec0
initcall: 00005ed8
initcall: 000060b8
initcall: 00005fd0
__image_copy_start : 00000000
__image_copy_end : 00024604
gd copied successfully to new gd...
Relocation Offset is: 43fcf000
Relocating to Addr 43fcf000, new gd at 43eaeee8, sp at 43eaeec0
Current Stack Pointer 90000a60
rrrr
ccccooooeeee4444eeeettttllll44445555ttttllll44445555ttttllll00006666eeeeaaaa
44445555))))ENABLE CACHESWARNING: Caches not enabled
ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa 44445555))))----ooooaaaaccccuuuu
7777tttt((((BBBBnnnneeeeyyyy4444ffff----4444ffffffffmmmmoooo
44449999----44449999
ttttllll00005555eeeeaaaa 44444444))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa
44445555))))aaaaffff____iiiibbbbeeee0000
aaaaffff____iiiibbbbeeee0000----
''''ttttiiii''''----ttttuuuuttttllll00001111eeeeaaaa
44440000))))IIII::::aaaaiiii
ttttllll0000aaaaeeeeaaaa 44449999))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa 44445555)))) nnnn
RRRR----BBBB 4444ffffttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa 44445555))))MMC:
ttttllll00006666eeeeaaaa 44445555))))nnnneeeellllnnnnoooonnnniiiimmmm
oooommmmccccNNNNooooccccaaaa
::::ooooddddhhhhoooooooooooonnnniiiiEEEE::::ooooddddhhhhoooooooooooonnnntttt
hhhhbbbb 44442222bbbb====00000000aaaaHHHH llllNNNN
eeeebbbb,,,,llll::::eeee BBBB mmmmeeeebbbb,,,,dddd::::eeee
BBBB mmmmEEEE llll44442222 llll1111 4444ffff eeeeoooo
uuuueeee BBBB mmmm""""EEEE eeeetttt 4444ffffEEEE
eeeettttllll00006666eeeeaaaa 44445555))))ttttllll0000aaaaeeeeaaaa
44449999))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00008888eeeeaaaa 44447777))))In: iiii4444ffff
Out: iiii4444ffff
Err: iiii4444ffff
tttt uuuuoooorrrr3333aaaaaaaa cccctttt
uuuuoooorrrr3333aaaaaaaa cccctttt uuuuoooorrrr3333aaaaaaaa
ccccttttllll0000ddddeeeeaaaa 4444ffff))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa
44445555))))ttttllll00006666eeeeaaaa 44445555))))Net:
ttttiiiiiiiiSSSSppppNo ethernet found.
ttttllll00006666eeeeaaaa 44445555))))tttt
uuuuoooorrrr3333aaaaaaaa cccc nnnnoooonnnneeeebbbbddddyyyy
nnnnoooobbbbcccc""""DDDDNNNN""""Uboot >
Uboot >
Uboot >
Uboot >
Uboot >
Uboot >
Uboot >
Uboot >
Regards,
Shekhar S
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Issue with relocating code to DDR
2018-11-01 13:44 [U-Boot] Issue with relocating code to DDR SHEKHAR SINGH
@ 2018-11-05 5:00 ` Heiko Schocher
2018-11-08 12:16 ` SHEKHAR SINGH
1 sibling, 0 replies; 4+ messages in thread
From: Heiko Schocher @ 2018-11-05 5:00 UTC (permalink / raw)
To: u-boot
Hello SHEKHAR SINGH,
Am 01.11.2018 um 14:44 schrieb SHEKHAR SINGH:
> Hi All,
>
> I am new to U-boot. Currently, I am working on developing U-boot for a new
> SOC. The SOC has arm926ej-s as the core and is implemented on Xilinx FPGA
> with SD-card as the boot device. With current setup DDR is already
> initialized by FPGA and SD card can be accessed using direct addressing. We
> have added board files and SoC related files to the Uboot directory and is
> able to successfully compile and get some outputs on UART (debug console).
> Currently, we have added only support for GPIO and UART drivers.
>
> SD Card : 0x00000000 - 0x007FFFFF
> SRAM : 0x90000000 - 0x90007FFF
> DDR : 0x40000000 - 0x43FFFFFF
>
> We are facing some issue with the uboot booting. We are able to see the
> initial uboot prints and debug prints when the stack pointer is in SRAM,
> but after we relocate the code from SD card to DDR and change the stack
> pointer to DDR we are getting junk prints on the console. Can anyone help
> me or suggest me what we are doing wrong here? Thanks in advance for your
> help.
>
> Please see the below UART Log:
>
> initcall: 00005cdc
> initcall: 00009a84
> initcall: 00005ccc
> initcall: 00005fbc
> initcall: 000060c0
> initcall: 00000418
> initcall: 00006090
> initcall: 00005fb4
> malloc_simple: size=18, ptr=18, limit=400: 90000b30
> malloc_simple: size=54, ptr=6c, limit=400: 90000b48
> malloc_simple: size=4, ptr=70, limit=400: 90000b9c
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 -1 'root_driver'
> - not found
> initcall: 00006088
> initcall: 000010b0
> initcall: 000004a8
> initcall: 0000f77c
> env_init: Environment nowhere init done (ret=0)
> initcall: 00005f88
> initcall: 0000f0dc
> initcall: 000147c0
>
>
> U-Boot 2018.09 (Nov 01 2018 - 18:33:40 +0530)
>
> initcall: 00005eac
> U-Boot code: 00000000 -> 00024604 BSS: -> 00030608
> initcall: 00000438
> CPU: SoC Version 0.01
> CPU clock: 75MHz
> SDRAM clock: 75MHz
> initcall: 00006470
> initcall: 00005f70
> DRAM: initcall: 000010ec
> SDRAM Reg 000 : ffffffff
> EDAC Reg 004 : ffffffff
> SDRAM Reg 100 : ffffffff
> EDAC Reg 104 : ffffffff
> EMC Reg : 1ff
> initcall: 00006178
> Monitor len: 00030608
> Ram size: 04000000
> gd->relocaddr : 44000000
> Ram top: 44000000
> initcall: 00005cfc
> initcall: 00006098
> initcall: 00005d14
> initcall: 000060a0
> initcall: 00005e44
> Reserving 193k for U-Boot at: 43fcf000
> initcall: 00005e18
> Reserving 1152k for malloc() at: 43eaf000
> initcall: 00005f1c
> Reserving 80 Bytes for Board Info at: 43eaefb0
> initcall: 000060a8
> initcall: 00005de4
> Reserving 200 Bytes for Global Data at: 43eaeee8
> initcall: 00005d5c
> initcall: 000060b0
> initcall: 000060c8
> initcall: 000061f4
> gd->relocaddr : 43FCF000
> initcall: 00005d1c
> initcall: 000060dc
>
> RAM Configuration:
> Bank #0: 40000000 64 MiB
>
> DRAM: 64 MiB
> initcall: 00005d40
> New Stack Pointer is: 43eaeec0
> initcall: 00005ed8
> initcall: 000060b8
> initcall: 00005fd0
> __image_copy_start : 00000000
> __image_copy_end : 00024604
> gd copied successfully to new gd...
> Relocation Offset is: 43fcf000
> Relocating to Addr 43fcf000, new gd at 43eaeee8, sp at 43eaeec0
> Current Stack Pointer 90000a60
Cannot say very much... so just some speculations:
Stack pointer seems not to be in RAM
May your RAM does not work correctly?
bye,
Heiko
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Issue with relocating code to DDR
2018-11-01 13:44 [U-Boot] Issue with relocating code to DDR SHEKHAR SINGH
2018-11-05 5:00 ` Heiko Schocher
@ 2018-11-08 12:16 ` SHEKHAR SINGH
2018-11-08 12:54 ` Clément Péron
1 sibling, 1 reply; 4+ messages in thread
From: SHEKHAR SINGH @ 2018-11-08 12:16 UTC (permalink / raw)
To: u-boot
Hi All,
We got the issue, actually our DDR only supports 32bit access, 16bit and
8bit access are not supported.
Is there any compiler option or any u-boot option, we need to configure so
that u-boot use 32 bit access only.
Thanks in advance.
Regards
Shekhar Singh
On Thu, Nov 1, 2018 at 7:14 PM SHEKHAR SINGH <imsinghshekhar@gmail.com>
wrote:
>
> Hi All,
>
> I am new to U-boot. Currently, I am working on developing U-boot for a new
> SOC. The SOC has arm926ej-s as the core and is implemented on Xilinx FPGA
> with SD-card as the boot device. With current setup DDR is already
> initialized by FPGA and SD card can be accessed using direct addressing. We
> have added board files and SoC related files to the Uboot directory and is
> able to successfully compile and get some outputs on UART (debug console).
> Currently, we have added only support for GPIO and UART drivers.
>
> SD Card : 0x00000000 - 0x007FFFFF
> SRAM : 0x90000000 - 0x90007FFF
> DDR : 0x40000000 - 0x43FFFFFF
>
> We are facing some issue with the uboot booting. We are able to see the
> initial uboot prints and debug prints when the stack pointer is in SRAM,
> but after we relocate the code from SD card to DDR and change the stack
> pointer to DDR we are getting junk prints on the console. Can anyone help
> me or suggest me what we are doing wrong here? Thanks in advance for your
> help.
>
> Please see the below UART Log:
>
> initcall: 00005cdc
> initcall: 00009a84
> initcall: 00005ccc
> initcall: 00005fbc
> initcall: 000060c0
> initcall: 00000418
> initcall: 00006090
> initcall: 00005fb4
> malloc_simple: size=18, ptr=18, limit=400: 90000b30
> malloc_simple: size=54, ptr=6c, limit=400: 90000b48
> malloc_simple: size=4, ptr=70, limit=400: 90000b9c
> uclass_find_device_by_seq: 0 -1
> uclass_find_device_by_seq: 0 0
> - -1 -1 'root_driver'
> - not found
> initcall: 00006088
> initcall: 000010b0
> initcall: 000004a8
> initcall: 0000f77c
> env_init: Environment nowhere init done (ret=0)
> initcall: 00005f88
> initcall: 0000f0dc
> initcall: 000147c0
>
>
> U-Boot 2018.09 (Nov 01 2018 - 18:33:40 +0530)
>
> initcall: 00005eac
> U-Boot code: 00000000 -> 00024604 BSS: -> 00030608
> initcall: 00000438
> CPU: SoC Version 0.01
> CPU clock: 75MHz
> SDRAM clock: 75MHz
> initcall: 00006470
> initcall: 00005f70
> DRAM: initcall: 000010ec
> SDRAM Reg 000 : ffffffff
> EDAC Reg 004 : ffffffff
> SDRAM Reg 100 : ffffffff
> EDAC Reg 104 : ffffffff
> EMC Reg : 1ff
> initcall: 00006178
> Monitor len: 00030608
> Ram size: 04000000
> gd->relocaddr : 44000000
> Ram top: 44000000
> initcall: 00005cfc
> initcall: 00006098
> initcall: 00005d14
> initcall: 000060a0
> initcall: 00005e44
> Reserving 193k for U-Boot at: 43fcf000
> initcall: 00005e18
> Reserving 1152k for malloc() at: 43eaf000
> initcall: 00005f1c
> Reserving 80 Bytes for Board Info at: 43eaefb0
> initcall: 000060a8
> initcall: 00005de4
> Reserving 200 Bytes for Global Data at: 43eaeee8
> initcall: 00005d5c
> initcall: 000060b0
> initcall: 000060c8
> initcall: 000061f4
> gd->relocaddr : 43FCF000
> initcall: 00005d1c
> initcall: 000060dc
>
> RAM Configuration:
> Bank #0: 40000000 64 MiB
>
> DRAM: 64 MiB
> initcall: 00005d40
> New Stack Pointer is: 43eaeec0
> initcall: 00005ed8
> initcall: 000060b8
> initcall: 00005fd0
> __image_copy_start : 00000000
> __image_copy_end : 00024604
> gd copied successfully to new gd...
> Relocation Offset is: 43fcf000
> Relocating to Addr 43fcf000, new gd at 43eaeee8, sp at 43eaeec0
> Current Stack Pointer 90000a60
> rrrr
> ccccooooeeee4444eeeettttllll44445555ttttllll44445555ttttllll00006666eeeeaaaa
> 44445555))))ENABLE CACHESWARNING: Caches not enabled
> ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa 44445555))))----ooooaaaaccccuuuu
> 7777tttt((((BBBBnnnneeeeyyyy4444ffff----4444ffffffffmmmmoooo
> 44449999----44449999
>
>
>
> ttttllll00005555eeeeaaaa 44444444))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa
> 44445555))))aaaaffff____iiiibbbbeeee0000
>
>
>
> aaaaffff____iiiibbbbeeee0000----
> ''''ttttiiii''''----ttttuuuuttttllll00001111eeeeaaaa
> 44440000))))IIII::::aaaaiiii
>
>
>
> ttttllll0000aaaaeeeeaaaa 44449999))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa 44445555)))) nnnn
> RRRR----BBBB 4444ffffttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa 44445555))))MMC:
> ttttllll00006666eeeeaaaa 44445555))))nnnneeeellllnnnnoooonnnniiiimmmm
> oooommmmccccNNNNooooccccaaaa
> ::::ooooddddhhhhoooooooooooonnnniiiiEEEE::::ooooddddhhhhoooooooooooonnnntttt
> hhhhbbbb 44442222bbbb====00000000aaaaHHHH llllNNNN
>
>
>
> eeeebbbb,,,,llll::::eeee BBBB mmmmeeeebbbb,,,,dddd::::eeee
> BBBB mmmmEEEE llll44442222 llll1111 4444ffff eeeeoooo
> uuuueeee BBBB mmmm""""EEEE eeeetttt 4444ffffEEEE
> eeeettttllll00006666eeeeaaaa 44445555))))ttttllll0000aaaaeeeeaaaa
> 44449999))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00008888eeeeaaaa 44447777))))In: iiii4444ffff
>
>
>
> Out: iiii4444ffff
>
>
>
> Err: iiii4444ffff
>
>
>
> tttt uuuuoooorrrr3333aaaaaaaa cccctttt
> uuuuoooorrrr3333aaaaaaaa cccctttt uuuuoooorrrr3333aaaaaaaa
> ccccttttllll0000ddddeeeeaaaa 4444ffff))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa
> 44445555))))ttttllll00006666eeeeaaaa 44445555))))Net:
> ttttiiiiiiiiSSSSppppNo ethernet found.
> ttttllll00006666eeeeaaaa 44445555))))tttt
> uuuuoooorrrr3333aaaaaaaa cccc nnnnoooonnnneeeebbbbddddyyyy
>
>
>
> nnnnoooobbbbcccc""""DDDDNNNN""""Uboot >
> Uboot >
> Uboot >
> Uboot >
> Uboot >
> Uboot >
> Uboot >
> Uboot >
>
>
>
> Regards,
> Shekhar S
>
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Issue with relocating code to DDR
2018-11-08 12:16 ` SHEKHAR SINGH
@ 2018-11-08 12:54 ` Clément Péron
0 siblings, 0 replies; 4+ messages in thread
From: Clément Péron @ 2018-11-08 12:54 UTC (permalink / raw)
To: u-boot
Hi,
Maybe check the GCC option "-mno-unaligned-access"
$>cat arch/arm/cpu/armv7/config.mk
#
# (C) Copyright 2002
# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
#
# SPDX-License-Identifier: GPL-2.0+
#
# On supported platforms we set the bit which causes us to trap on unaligned
# memory access. This is the opposite of what the compiler expects to be
# the default so we must pass in -mno-unaligned-access so that it is aware
# of our decision.
PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
PLATFORM_CPPFLAGS += $(PF_NO_UNALIGNED)
Regards,
Clement
On Thu, 8 Nov 2018 at 13:16, SHEKHAR SINGH <imsinghshekhar@gmail.com> wrote:
>
> Hi All,
>
> We got the issue, actually our DDR only supports 32bit access, 16bit and 8bit access are not supported.
> Is there any compiler option or any u-boot option, we need to configure so that u-boot use 32 bit access only.
>
> Thanks in advance.
> Regards
> Shekhar Singh
>
> On Thu, Nov 1, 2018 at 7:14 PM SHEKHAR SINGH <imsinghshekhar@gmail.com> wrote:
>>
>>
>> Hi All,
>>
>> I am new to U-boot. Currently, I am working on developing U-boot for a new SOC. The SOC has arm926ej-s as the core and is implemented on Xilinx FPGA with SD-card as the boot device. With current setup DDR is already initialized by FPGA and SD card can be accessed using direct addressing. We have added board files and SoC related files to the Uboot directory and is able to successfully compile and get some outputs on UART (debug console). Currently, we have added only support for GPIO and UART drivers.
>>
>> SD Card : 0x00000000 - 0x007FFFFF
>> SRAM : 0x90000000 - 0x90007FFF
>> DDR : 0x40000000 - 0x43FFFFFF
>>
>> We are facing some issue with the uboot booting. We are able to see the initial uboot prints and debug prints when the stack pointer is in SRAM, but after we relocate the code from SD card to DDR and change the stack pointer to DDR we are getting junk prints on the console. Can anyone help me or suggest me what we are doing wrong here? Thanks in advance for your help.
>>
>> Please see the below UART Log:
>>
>> initcall: 00005cdc
>> initcall: 00009a84
>> initcall: 00005ccc
>> initcall: 00005fbc
>> initcall: 000060c0
>> initcall: 00000418
>> initcall: 00006090
>> initcall: 00005fb4
>> malloc_simple: size=18, ptr=18, limit=400: 90000b30
>> malloc_simple: size=54, ptr=6c, limit=400: 90000b48
>> malloc_simple: size=4, ptr=70, limit=400: 90000b9c
>> uclass_find_device_by_seq: 0 -1
>> uclass_find_device_by_seq: 0 0
>> - -1 -1 'root_driver'
>> - not found
>> initcall: 00006088
>> initcall: 000010b0
>> initcall: 000004a8
>> initcall: 0000f77c
>> env_init: Environment nowhere init done (ret=0)
>> initcall: 00005f88
>> initcall: 0000f0dc
>> initcall: 000147c0
>>
>>
>> U-Boot 2018.09 (Nov 01 2018 - 18:33:40 +0530)
>>
>> initcall: 00005eac
>> U-Boot code: 00000000 -> 00024604 BSS: -> 00030608
>> initcall: 00000438
>> CPU: SoC Version 0.01
>> CPU clock: 75MHz
>> SDRAM clock: 75MHz
>> initcall: 00006470
>> initcall: 00005f70
>> DRAM: initcall: 000010ec
>> SDRAM Reg 000 : ffffffff
>> EDAC Reg 004 : ffffffff
>> SDRAM Reg 100 : ffffffff
>> EDAC Reg 104 : ffffffff
>> EMC Reg : 1ff
>> initcall: 00006178
>> Monitor len: 00030608
>> Ram size: 04000000
>> gd->relocaddr : 44000000
>> Ram top: 44000000
>> initcall: 00005cfc
>> initcall: 00006098
>> initcall: 00005d14
>> initcall: 000060a0
>> initcall: 00005e44
>> Reserving 193k for U-Boot at: 43fcf000
>> initcall: 00005e18
>> Reserving 1152k for malloc() at: 43eaf000
>> initcall: 00005f1c
>> Reserving 80 Bytes for Board Info at: 43eaefb0
>> initcall: 000060a8
>> initcall: 00005de4
>> Reserving 200 Bytes for Global Data at: 43eaeee8
>> initcall: 00005d5c
>> initcall: 000060b0
>> initcall: 000060c8
>> initcall: 000061f4
>> gd->relocaddr : 43FCF000
>> initcall: 00005d1c
>> initcall: 000060dc
>>
>> RAM Configuration:
>> Bank #0: 40000000 64 MiB
>>
>> DRAM: 64 MiB
>> initcall: 00005d40
>> New Stack Pointer is: 43eaeec0
>> initcall: 00005ed8
>> initcall: 000060b8
>> initcall: 00005fd0
>> __image_copy_start : 00000000
>> __image_copy_end : 00024604
>> gd copied successfully to new gd...
>> Relocation Offset is: 43fcf000
>> Relocating to Addr 43fcf000, new gd at 43eaeee8, sp at 43eaeec0
>> Current Stack Pointer 90000a60
>> rrrr ccccooooeeee4444eeeettttllll44445555ttttllll44445555ttttllll00006666eeeeaaaa 44445555))))ENABLE CACHESWARNING: Caches not enabled
>> ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))----ooooaaaaccccuuuu 7777tttt((((BBBBnnnneeeeyyyy4444ffff----4444ffffffffmmmmoooo 44449999----44449999
>>
>>
>>
>> ttttllll00005555eeeeaaaa 44444444))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))aaaaffff____iiiibbbbeeee0000
>>
>>
>>
>> aaaaffff____iiiibbbbeeee0000---- ''''ttttiiii''''----ttttuuuuttttllll00001111eeeeaaaa 44440000))))IIII::::aaaaiiii
>>
>>
>>
>> ttttllll0000aaaaeeeeaaaa 44449999))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555)))) nnnn RRRR----BBBB 4444ffffttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))MMC: ttttllll00006666eeeeaaaa 44445555))))nnnneeeellllnnnnoooonnnniiiimmmm oooommmmccccNNNNooooccccaaaa ::::ooooddddhhhhoooooooooooonnnniiiiEEEE::::ooooddddhhhhoooooooooooonnnntttt hhhhbbbb 44442222bbbb====00000000aaaaHHHH llllNNNN
>>
>>
>>
>> eeeebbbb,,,,llll::::eeee BBBB mmmmeeeebbbb,,,,dddd::::eeee BBBB mmmmEEEE llll44442222 llll1111 4444ffff eeeeoooo uuuueeee BBBB mmmm""""EEEE eeeetttt 4444ffffEEEE eeeettttllll00006666eeeeaaaa 44445555))))ttttllll0000aaaaeeeeaaaa 44449999))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00008888eeeeaaaa 44447777))))In: iiii4444ffff
>>
>>
>>
>> Out: iiii4444ffff
>>
>>
>>
>> Err: iiii4444ffff
>>
>>
>>
>> tttt uuuuoooorrrr3333aaaaaaaa cccctttt uuuuoooorrrr3333aaaaaaaa cccctttt uuuuoooorrrr3333aaaaaaaa ccccttttllll0000ddddeeeeaaaa 4444ffff))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))ttttllll00006666eeeeaaaa 44445555))))Net: ttttiiiiiiiiSSSSppppNo ethernet found.
>> ttttllll00006666eeeeaaaa 44445555))))tttt uuuuoooorrrr3333aaaaaaaa cccc nnnnoooonnnneeeebbbbddddyyyy
>>
>>
>>
>> nnnnoooobbbbcccc""""DDDDNNNN""""Uboot >
>> Uboot >
>> Uboot >
>> Uboot >
>> Uboot >
>> Uboot >
>> Uboot >
>> Uboot >
>>
>>
>>
>> Regards,
>> Shekhar S
>>
>>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-11-08 12:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-01 13:44 [U-Boot] Issue with relocating code to DDR SHEKHAR SINGH
2018-11-05 5:00 ` Heiko Schocher
2018-11-08 12:16 ` SHEKHAR SINGH
2018-11-08 12:54 ` Clément Péron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.