* [PATCH resubmit] net: fec: Add ECR bit macros, fix FEC_ECR_EN1588 being cleared on link-down
@ 2024-02-07 12:36 Csókás Bence
2024-02-07 14:44 ` Andrew Lunn
0 siblings, 1 reply; 3+ messages in thread
From: Csókás Bence @ 2024-02-07 12:36 UTC (permalink / raw)
To: netdev
Cc: Jakub Kicinski, David S. Miller, Wei Fang, Shenwei Wang,
Clark Wang, NXP Linux Team, Eric Dumazet, Paolo Abeni,
Francesco Dolcini, Andrew Lunn, Marc Kleine-Budde,
Csókás Bence
FEC_ECR_EN1588 bit gets cleared after MAC reset in `fec_stop()`, which
makes all 1588 functionality shut down on link-down. However, some
functionality needs to be retained (e.g. PPS) even without link.
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
---
drivers/net/ethernet/freescale/fec_main.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 63707e065141..652251e48ad4 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -273,8 +273,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
#define FEC_MMFR_TA (2 << 16)
#define FEC_MMFR_DATA(v) (v & 0xffff)
/* FEC ECR bits definition */
-#define FEC_ECR_MAGICEN (1 << 2)
-#define FEC_ECR_SLEEP (1 << 3)
+#define FEC_ECR_RESET BIT(0)
+#define FEC_ECR_ETHEREN BIT(1)
+#define FEC_ECR_MAGICEN BIT(2)
+#define FEC_ECR_SLEEP BIT(3)
+#define FEC_ECR_EN1588 BIT(4)
#define FEC_MII_TIMEOUT 30000 /* us */
@@ -1213,7 +1216,7 @@ fec_restart(struct net_device *ndev)
}
if (fep->bufdesc_ex)
- ecntl |= (1 << 4);
+ ecntl |= FEC_ECR_EN1588;
if (fep->quirks & FEC_QUIRK_DELAYED_CLKS_SUPPORT &&
fep->rgmii_txc_dly)
@@ -1314,6 +1317,7 @@ fec_stop(struct net_device *ndev)
struct fec_enet_private *fep = netdev_priv(ndev);
u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
u32 val;
+ u32 ecntl = 0;
/* We cannot expect a graceful transmit stop without link !!! */
if (fep->link) {
@@ -1342,12 +1346,17 @@ fec_stop(struct net_device *ndev)
writel(fep->phy_speed, fep->hwp + FEC_MII_SPEED);
writel(FEC_DEFAULT_IMASK, fep->hwp + FEC_IMASK);
+ if (fep->bufdesc_ex)
+ ecntl |= FEC_ECR_EN1588;
+
/* We have to keep ENET enabled to have MII interrupt stay working */
if (fep->quirks & FEC_QUIRK_ENET_MAC &&
!(fep->wol_flag & FEC_WOL_FLAG_SLEEP_ON)) {
- writel(2, fep->hwp + FEC_ECNTRL);
+ ecntl |= FEC_ECR_ETHEREN;
writel(rmii_mode, fep->hwp + FEC_R_CNTRL);
}
+
+ writel(ecntl, fep->hwp + FEC_ECNTRL);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH resubmit] net: fec: Add ECR bit macros, fix FEC_ECR_EN1588 being cleared on link-down
2024-02-07 12:36 [PATCH resubmit] net: fec: Add ECR bit macros, fix FEC_ECR_EN1588 being cleared on link-down Csókás Bence
@ 2024-02-07 14:44 ` Andrew Lunn
2024-02-07 14:55 ` Csókás Bence
0 siblings, 1 reply; 3+ messages in thread
From: Andrew Lunn @ 2024-02-07 14:44 UTC (permalink / raw)
To: Csókás Bence
Cc: netdev, Jakub Kicinski, David S. Miller, Wei Fang, Shenwei Wang,
Clark Wang, NXP Linux Team, Eric Dumazet, Paolo Abeni,
Francesco Dolcini, Marc Kleine-Budde
On Wed, Feb 07, 2024 at 01:36:11PM +0100, Csókás Bence wrote:
> FEC_ECR_EN1588 bit gets cleared after MAC reset in `fec_stop()`, which
> makes all 1588 functionality shut down on link-down. However, some
> functionality needs to be retained (e.g. PPS) even without link.
This is the second version of the patch, so the subject should say v2
within the [PATCH ].
Is this fixing a regression, or did it never work correctly?
> Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
> ---
> drivers/net/ethernet/freescale/fec_main.c | 17 +++++++++++++----
> 1 file changed, 13 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> index 63707e065141..652251e48ad4 100644
> --- a/drivers/net/ethernet/freescale/fec_main.c
> +++ b/drivers/net/ethernet/freescale/fec_main.c
> @@ -273,8 +273,11 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
> #define FEC_MMFR_TA (2 << 16)
> #define FEC_MMFR_DATA(v) (v & 0xffff)
> /* FEC ECR bits definition */
> -#define FEC_ECR_MAGICEN (1 << 2)
> -#define FEC_ECR_SLEEP (1 << 3)
> +#define FEC_ECR_RESET BIT(0)
> +#define FEC_ECR_ETHEREN BIT(1)
> +#define FEC_ECR_MAGICEN BIT(2)
> +#define FEC_ECR_SLEEP BIT(3)
> +#define FEC_ECR_EN1588 BIT(4)
There was a request to keep the indentation the same. So the BIT()
need moving right.
>
> #define FEC_MII_TIMEOUT 30000 /* us */
>
> @@ -1213,7 +1216,7 @@ fec_restart(struct net_device *ndev)
> }
>
> if (fep->bufdesc_ex)
> - ecntl |= (1 << 4);
> + ecntl |= FEC_ECR_EN1588;
Please could you split this into two patches. The first patch
introduced the new #defines, and uses them in the existing code. That
should be obviously correct. And a second patch adding the new
functionality, with a good commit message explaining the change,
particularly the Why?
>
> if (fep->quirks & FEC_QUIRK_DELAYED_CLKS_SUPPORT &&
> fep->rgmii_txc_dly)
> @@ -1314,6 +1317,7 @@ fec_stop(struct net_device *ndev)
> struct fec_enet_private *fep = netdev_priv(ndev);
> u32 rmii_mode = readl(fep->hwp + FEC_R_CNTRL) & (1 << 8);
> u32 val;
> + u32 ecntl = 0;
Reverse Christmas tree, as pointed out in your first version of the
patch.
Thanks
Andrew
---
pw-bot: cr
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH resubmit] net: fec: Add ECR bit macros, fix FEC_ECR_EN1588 being cleared on link-down
2024-02-07 14:44 ` Andrew Lunn
@ 2024-02-07 14:55 ` Csókás Bence
0 siblings, 0 replies; 3+ messages in thread
From: Csókás Bence @ 2024-02-07 14:55 UTC (permalink / raw)
To: Andrew Lunn
Cc: netdev, Jakub Kicinski, David S. Miller, Wei Fang, Shenwei Wang,
Clark Wang, NXP Linux Team, Eric Dumazet, Paolo Abeni,
Francesco Dolcini, Marc Kleine-Budde
2024. 02. 07. 15:44 keltezéssel, Andrew Lunn írta:
> On Wed, Feb 07, 2024 at 01:36:11PM +0100, Csókás Bence wrote:
>> FEC_ECR_EN1588 bit gets cleared after MAC reset in `fec_stop()`, which
>> makes all 1588 functionality shut down on link-down. However, some
>> functionality needs to be retained (e.g. PPS) even without link.
>
> This is the second version of the patch, so the subject should say v2
> within the [PATCH ].
This is the same as the other, just added the rationale text to the
message body.
> Is this fixing a regression, or did it never work correctly?
PTP on this family of Ethernet controllers is utterly broken. See commit
f79959220fa5fbda939592bf91c7a9ea90419040 (reverted). I plan on
re-submitting that entire patch, if i can figure out the locking
problems that have arisen.
> Please could you split this into two patches. The first patch
> introduced the new #defines, and uses them in the existing code. That
> should be obviously correct. And a second patch adding the new
> functionality, with a good commit message explaining the change,
> particularly the Why?
Sure.
> There was a request to keep the indentation the same. So the BIT()
> need moving right.
> Reverse Christmas tree, as pointed out in your first version of the
> patch.
Ah, sorry, I missed those. Also can do.
> Thanks
> Andrew
>
> ---
> pw-bot: cr
>
Bence
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-02-07 14:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-02-07 12:36 [PATCH resubmit] net: fec: Add ECR bit macros, fix FEC_ECR_EN1588 being cleared on link-down Csókás Bence
2024-02-07 14:44 ` Andrew Lunn
2024-02-07 14:55 ` Csókás Bence
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.