* [PATCH 0/2] i2c: cadence: HOLD bit manipulation
@ 2020-07-03 13:54 ` Raviteja Narayanam
0 siblings, 0 replies; 6+ messages in thread
From: Raviteja Narayanam @ 2020-07-03 13:54 UTC (permalink / raw)
To: linux-i2c
Cc: michal.simek, linux-arm-kernel, linux-kernel, git, Raviteja Narayanam
This patch series clears the HOLD bit at right time.
Raviteja Narayanam (2):
Revert "i2c: cadence: Fix the hold bit setting"
i2c: cadence: Clear HOLD bit at correct time in Rx path
drivers/i2c/busses/i2c-cadence.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 0/2] i2c: cadence: HOLD bit manipulation
@ 2020-07-03 13:54 ` Raviteja Narayanam
0 siblings, 0 replies; 6+ messages in thread
From: Raviteja Narayanam @ 2020-07-03 13:54 UTC (permalink / raw)
To: linux-i2c
Cc: git, Raviteja Narayanam, michal.simek, linux-arm-kernel, linux-kernel
This patch series clears the HOLD bit at right time.
Raviteja Narayanam (2):
Revert "i2c: cadence: Fix the hold bit setting"
i2c: cadence: Clear HOLD bit at correct time in Rx path
drivers/i2c/busses/i2c-cadence.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] i2c: cadence: HOLD bit manipulation
2020-07-03 13:54 ` Raviteja Narayanam
@ 2020-07-09 14:36 ` Michal Simek
-1 siblings, 0 replies; 6+ messages in thread
From: Michal Simek @ 2020-07-09 14:36 UTC (permalink / raw)
To: Raviteja Narayanam, linux-i2c
Cc: michal.simek, linux-arm-kernel, linux-kernel, git, kyle.roeschley
On 03. 07. 20 15:54, Raviteja Narayanam wrote:
> This patch series clears the HOLD bit at right time.
>
> Raviteja Narayanam (2):
> Revert "i2c: cadence: Fix the hold bit setting"
> i2c: cadence: Clear HOLD bit at correct time in Rx path
>
> drivers/i2c/busses/i2c-cadence.c | 28 ++++++++++++----------------
> 1 file changed, 12 insertions(+), 16 deletions(-)
>
Kyle: Can you please test these 2 patches on your platform to see if
this is fine?
Thanks,
Michal
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] i2c: cadence: HOLD bit manipulation
@ 2020-07-09 14:36 ` Michal Simek
0 siblings, 0 replies; 6+ messages in thread
From: Michal Simek @ 2020-07-09 14:36 UTC (permalink / raw)
To: Raviteja Narayanam, linux-i2c
Cc: git, kyle.roeschley, michal.simek, linux-arm-kernel, linux-kernel
On 03. 07. 20 15:54, Raviteja Narayanam wrote:
> This patch series clears the HOLD bit at right time.
>
> Raviteja Narayanam (2):
> Revert "i2c: cadence: Fix the hold bit setting"
> i2c: cadence: Clear HOLD bit at correct time in Rx path
>
> drivers/i2c/busses/i2c-cadence.c | 28 ++++++++++++----------------
> 1 file changed, 12 insertions(+), 16 deletions(-)
>
Kyle: Can you please test these 2 patches on your platform to see if
this is fine?
Thanks,
Michal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] i2c: cadence: HOLD bit manipulation
2020-07-03 13:54 ` Raviteja Narayanam
@ 2020-07-22 10:24 ` Michal Simek
-1 siblings, 0 replies; 6+ messages in thread
From: Michal Simek @ 2020-07-22 10:24 UTC (permalink / raw)
To: Raviteja Narayanam, linux-i2c
Cc: michal.simek, linux-arm-kernel, linux-kernel, git
On 03. 07. 20 15:54, Raviteja Narayanam wrote:
> This patch series clears the HOLD bit at right time.
>
> Raviteja Narayanam (2):
> Revert "i2c: cadence: Fix the hold bit setting"
> i2c: cadence: Clear HOLD bit at correct time in Rx path
>
> drivers/i2c/busses/i2c-cadence.c | 28 ++++++++++++----------------
> 1 file changed, 12 insertions(+), 16 deletions(-)
>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Wolfram: Please merge.
Thanks,
Michal
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] i2c: cadence: HOLD bit manipulation
@ 2020-07-22 10:24 ` Michal Simek
0 siblings, 0 replies; 6+ messages in thread
From: Michal Simek @ 2020-07-22 10:24 UTC (permalink / raw)
To: Raviteja Narayanam, linux-i2c
Cc: git, michal.simek, linux-arm-kernel, linux-kernel
On 03. 07. 20 15:54, Raviteja Narayanam wrote:
> This patch series clears the HOLD bit at right time.
>
> Raviteja Narayanam (2):
> Revert "i2c: cadence: Fix the hold bit setting"
> i2c: cadence: Clear HOLD bit at correct time in Rx path
>
> drivers/i2c/busses/i2c-cadence.c | 28 ++++++++++++----------------
> 1 file changed, 12 insertions(+), 16 deletions(-)
>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Wolfram: Please merge.
Thanks,
Michal
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-22 10:26 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-03 13:54 [PATCH 0/2] i2c: cadence: HOLD bit manipulation Raviteja Narayanam
2020-07-03 13:54 ` Raviteja Narayanam
2020-07-09 14:36 ` Michal Simek
2020-07-09 14:36 ` Michal Simek
2020-07-22 10:24 ` Michal Simek
2020-07-22 10:24 ` Michal Simek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.