* [BUG] Pinebook Pro won't boot since ac804143cf, regression from -rc1
@ 2021-09-07 5:22 Tomasz Bielecki
2021-10-01 9:38 ` Jack Mitchell
0 siblings, 1 reply; 2+ messages in thread
From: Tomasz Bielecki @ 2021-09-07 5:22 UTC (permalink / raw)
To: u-boot
Hi all,
Starting with:
ac804143cf (refs/bisect/bad) mmc: rockchip_sdhci: add phy and clock
config for rk3399
Pinebook Pro won't boot.
U-boot is installed on the internal MMC, the serial console shows this:
U-Boot TPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50 -0700)
Trying to boot from SPI
Trying to boot from MMC2
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
--
Tomasz
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [BUG] Pinebook Pro won't boot since ac804143cf, regression from -rc1
2021-09-07 5:22 [BUG] Pinebook Pro won't boot since ac804143cf, regression from -rc1 Tomasz Bielecki
@ 2021-10-01 9:38 ` Jack Mitchell
0 siblings, 0 replies; 2+ messages in thread
From: Jack Mitchell @ 2021-10-01 9:38 UTC (permalink / raw)
To: u-boot
On 07/09/2021 06:22, Tomasz Bielecki wrote:
> Hi all,
>
> Starting with:
> ac804143cf (refs/bisect/bad) mmc: rockchip_sdhci: add phy and clock
> config for rk3399
> Pinebook Pro won't boot.
> U-boot is installed on the internal MMC, the serial console shows this:
>
> U-Boot TPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50)
> Channel 0: LPDDR4, 50MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> Channel 1: LPDDR4, 50MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> 256B stride
> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> Trying to boot from BOOTROM
> Returning to boot ROM...
>
> U-Boot SPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50 -0700)
> Trying to boot from SPI
> Trying to boot from MMC2
> Card did not respond to voltage select! : -110
> spl: mmc init failed with error: -95
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
Hi Tomasz,
I'm hitting the same issue with a custom 3399 based board, did you ever
get to the bottom of it?
Regards,
--
Jack Mitchell, Consultant
https://www.tuxable.co.uk
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-01 9:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-07 5:22 [BUG] Pinebook Pro won't boot since ac804143cf, regression from -rc1 Tomasz Bielecki
2021-10-01 9:38 ` Jack Mitchell
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.