From: ahmadkhorrami <ahmadkhorrami@ut.ac.ir>
To: Linux-trace Users <linux-trace-users@vger.kernel.org>
Subject: Wrong Perf Backtraces
Date: Mon, 23 Mar 2020 00:54:01 +0430 [thread overview]
Message-ID: <bd85fc28dfb5dcf7fc10507c3c86a56d@ut.ac.ir> (raw)
In-Reply-To: <157597d74ff17f781d9de7e7e3defd13@ut.ac.ir>
Hi,
I used "Perf" to extract call graphs in an evince benchmark. The command
used is as follows:
sudo perf record -d --call-graph dwarf -c 10000 e
mem_load_uops_retired.l3_miss:uppp /opt/evince-3.28.4/bin/evince
I extracted the backtraces using "perf script" and found out that there
are many corrupted backtrace instances. Some contained repeated function
calls, for example two consecutive gmallocn()s exactly at the same
offsets. There are also some backtraces where the callers and callees do
not match.
Note that that mappings are correct. In other words, each single line of
the reported backtraces is correct (i.e., addresses match with
functions). But is seems that there are some function calls in the
middle, which are missed by "Perf". Strangely, in all runs (and also
with different sampling frequencies) the problem occurs exactly at the
same place.
I am really confused and looking forward to any help. I can also send
backtraces if needed.
Regards.
next parent reply other threads:[~2020-03-22 20:24 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <157597d74ff17f781d9de7e7e3defd13@ut.ac.ir>
2020-03-22 20:24 ` ahmadkhorrami [this message]
2020-03-23 0:34 ` Wrong Perf Backtraces Steven Rostedt
[not found] ` <21b3df4080709f193d62b159887e2a83@ut.ac.ir>
2020-03-23 8:49 ` Jiri Olsa
2020-03-23 10:03 ` ahmadkhorrami
2020-03-25 15:18 ` ahmadkhorrami
2020-03-25 15:46 ` Jiri Olsa
2020-03-25 18:54 ` ahmadkhorrami
2020-03-25 18:58 ` Arnaldo Carvalho de Melo
2020-03-25 19:10 ` ahmadkhorrami
2020-03-25 19:28 ` Arnaldo Carvalho de Melo
2020-03-25 20:01 ` ahmadkhorrami
2020-03-25 20:39 ` Jiri Olsa
2020-03-25 21:02 ` Jiri Olsa
2020-03-25 21:09 ` Steven Rostedt
2020-03-25 21:37 ` ahmadkhorrami
2020-03-25 21:46 ` Jiri Olsa
2020-03-25 22:21 ` ahmadkhorrami
2020-03-25 23:09 ` ahmadkhorrami
2020-03-26 9:59 ` Jiri Olsa
2020-03-26 13:20 ` ahmadkhorrami
2020-03-26 15:39 ` Jiri Olsa
2020-03-26 18:19 ` ahmadkhorrami
2020-03-26 18:21 ` ahmadkhorrami
2020-03-27 9:20 ` Jiri Olsa
2020-03-27 10:59 ` ahmadkhorrami
2020-03-27 11:04 ` ahmadkhorrami
2020-03-27 12:10 ` Milian Wolff
2020-03-27 12:58 ` ahmadkhorrami
2020-03-27 13:25 ` Milian Wolff
2020-03-27 13:33 ` ahmadkhorrami
2020-03-27 18:43 ` ahmadkhorrami
2020-03-27 22:37 ` Jiri Olsa
2020-03-27 23:12 ` ahmadkhorrami
2020-03-28 23:34 ` Jiri Olsa
2020-03-29 0:43 ` ahmadkhorrami
2020-03-29 1:16 ` ahmadkhorrami
2020-03-29 11:19 ` Jiri Olsa
2020-03-29 11:52 ` ahmadkhorrami
2020-03-29 12:08 ` Jiri Olsa
2020-03-29 12:39 ` ahmadkhorrami
2020-03-29 13:50 ` Milian Wolff
2020-03-29 14:23 ` ahmadkhorrami
2020-03-29 19:20 ` Jiri Olsa
2020-03-30 6:09 ` Milian Wolff
2020-03-30 13:07 ` Jiri Olsa
2020-03-30 13:49 ` ahmadkhorrami
2020-03-30 19:05 ` ahmadkhorrami
2020-03-30 21:05 ` debuginfod-based dwarf downloading, was " Frank Ch. Eigler
2020-03-31 9:26 ` Jiri Olsa
2020-03-31 14:00 ` Frank Ch. Eigler
2020-03-31 4:43 ` ahmadkhorrami
2020-03-31 9:30 ` Jiri Olsa
2020-03-31 11:53 ` ahmadkhorrami
2020-03-31 12:43 ` ahmadkhorrami
2020-03-31 13:20 ` Jiri Olsa
2020-03-31 13:39 ` ahmadkhorrami
2020-03-31 14:44 ` Milian Wolff
2020-03-31 15:02 ` ahmadkhorrami
2020-03-31 15:05 ` ahmadkhorrami
2020-03-31 15:29 ` Milian Wolff
2020-03-31 16:10 ` Arnaldo Carvalho de Melo
2020-03-31 19:20 ` ahmadkhorrami
2020-03-31 19:17 ` ahmadkhorrami
2020-03-31 20:57 ` ahmadkhorrami
2020-04-04 1:01 ` ahmadkhorrami
2020-04-11 16:42 ` ahmadkhorrami
2020-04-11 21:04 ` ahmadkhorrami
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd85fc28dfb5dcf7fc10507c3c86a56d@ut.ac.ir \
--to=ahmadkhorrami@ut.ac.ir \
--cc=linux-trace-users@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.