All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rahul Tanwar <rahul.tanwar@linux.intel.com>
To: u.kleine-koenig@pengutronix.de, linux-pwm@vger.kernel.org,
	lee.jones@linaro.org
Cc: thierry.reding@gmail.com, p.zabel@pengutronix.de,
	robh+dt@kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, andriy.shevchenko@intel.com,
	songjun.Wu@intel.com, cheol.yong.kim@intel.com,
	qi-ming.wu@intel.com, rahul.tanwar.linux@gmail.com,
	rtanwar@maxlinear.com,
	Rahul Tanwar <rahul.tanwar@linux.intel.com>
Subject: [PATCH v13 2/2] Add PWM fan controller driver for LGM SoC
Date: Tue, 15 Sep 2020 16:23:37 +0800	[thread overview]
Message-ID: <befa655d8beb326fc8aa405a25a8b3e62b7e6a4a.1600158087.git.rahul.tanwar@linux.intel.com> (raw)
In-Reply-To: <cover.1600158087.git.rahul.tanwar@linux.intel.com>
In-Reply-To: <cover.1600158087.git.rahul.tanwar@linux.intel.com>

Intel Lightning Mountain(LGM) SoC contains a PWM fan controller.
This PWM controller does not have any other consumer, it is a
dedicated PWM controller for fan attached to the system. Add
driver for this PWM fan controller.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
---
 drivers/pwm/Kconfig         |  11 ++
 drivers/pwm/Makefile        |   1 +
 drivers/pwm/pwm-intel-lgm.c | 246 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 drivers/pwm/pwm-intel-lgm.c

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 7dbcf6973d33..4949c51fe90b 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -232,6 +232,17 @@ config PWM_IMX_TPM
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-imx-tpm.
 
+config PWM_INTEL_LGM
+	tristate "Intel LGM PWM support"
+	depends on HAS_IOMEM
+	depends on (OF && X86) || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Generic PWM fan controller driver for LGM SoC.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-intel-lgm.
+
 config PWM_IQS620A
 	tristate "Azoteq IQS620A PWM support"
 	depends on MFD_IQS62X || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 2c2ba0a03557..e9431b151694 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_IMG)		+= pwm-img.o
 obj-$(CONFIG_PWM_IMX1)		+= pwm-imx1.o
 obj-$(CONFIG_PWM_IMX27)		+= pwm-imx27.o
 obj-$(CONFIG_PWM_IMX_TPM)	+= pwm-imx-tpm.o
+obj-$(CONFIG_PWM_INTEL_LGM)	+= pwm-intel-lgm.o
 obj-$(CONFIG_PWM_IQS620A)	+= pwm-iqs620a.o
 obj-$(CONFIG_PWM_JZ4740)	+= pwm-jz4740.o
 obj-$(CONFIG_PWM_LP3943)	+= pwm-lp3943.o
diff --git a/drivers/pwm/pwm-intel-lgm.c b/drivers/pwm/pwm-intel-lgm.c
new file mode 100644
index 000000000000..ea3df75a5971
--- /dev/null
+++ b/drivers/pwm/pwm-intel-lgm.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Intel Corporation.
+ *
+ * Limitations:
+ * - The hardware supports fixed period which is dependent on 2/3 or 4
+ *   wire fan mode.
+ * - Supports normal polarity. Does not support changing polarity.
+ * - When PWM is disabled, output of PWM will become 0(inactive). It doesn't
+ *   keep track of running period.
+ * - When duty cycle is changed, PWM output may be a mix of previous setting
+ *   and new setting for the first period. From second period, the output is
+ *   based on new setting.
+ * - It is a dedicated PWM fan controller. There are no other consumers for
+ *   this PWM controller.
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#define LGM_PWM_FAN_CON0		0x0
+#define LGM_PWM_FAN_EN_EN		BIT(0)
+#define LGM_PWM_FAN_EN_DIS		0x0
+#define LGM_PWM_FAN_EN_MSK		BIT(0)
+#define LGM_PWM_FAN_MODE_2WIRE		0x0
+#define LGM_PWM_FAN_MODE_MSK		BIT(1)
+#define LGM_PWM_FAN_DC_MSK		GENMASK(23, 16)
+
+#define LGM_PWM_FAN_CON1		0x4
+#define LGM_PWM_FAN_MAX_RPM_MSK		GENMASK(15, 0)
+
+#define LGM_PWM_MAX_RPM			(BIT(16) - 1)
+#define LGM_PWM_DEFAULT_RPM		4000
+#define LGM_PWM_MAX_DUTY_CYCLE		(BIT(8) - 1)
+
+#define LGM_PWM_DC_BITS			8
+
+#define LGM_PWM_PERIOD_2WIRE_NS		(40 * NSEC_PER_MSEC)
+
+struct lgm_pwm_chip {
+	struct pwm_chip chip;
+	struct regmap *regmap;
+	struct clk *clk;
+	struct reset_control *rst;
+	u32 period;
+};
+
+static inline struct lgm_pwm_chip *to_lgm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct lgm_pwm_chip, chip);
+}
+
+static int lgm_pwm_enable(struct pwm_chip *chip, bool enable)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	struct regmap *regmap = pc->regmap;
+
+	return regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_EN_MSK,
+				  enable ? LGM_PWM_FAN_EN_EN : LGM_PWM_FAN_EN_DIS);
+}
+
+static int lgm_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty_cycle, val;
+	int ret;
+
+	/* The hardware only supports normal polarity and fixed period. */
+	if (state->polarity != PWM_POLARITY_NORMAL || state->period < pc->period)
+		return -EINVAL;
+
+	if (!state->enabled)
+		return lgm_pwm_enable(chip, 0);
+
+	duty_cycle = min_t(u64, state->duty_cycle, pc->period);
+	val = duty_cycle * LGM_PWM_MAX_DUTY_CYCLE / pc->period;
+
+	ret = regmap_update_bits(pc->regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_DC_MSK,
+				 FIELD_PREP(LGM_PWM_FAN_DC_MSK, val));
+	if (ret)
+		return ret;
+
+	return lgm_pwm_enable(chip, 1);
+}
+
+static void lgm_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct lgm_pwm_chip *pc = to_lgm_pwm_chip(chip);
+	u32 duty, val;
+
+	state->enabled = regmap_test_bits(pc->regmap, LGM_PWM_FAN_CON0,
+					  LGM_PWM_FAN_EN_EN);
+	state->polarity = PWM_POLARITY_NORMAL;
+	state->period = pc->period; /* fixed period */
+
+	regmap_read(pc->regmap, LGM_PWM_FAN_CON0, &val);
+	duty = FIELD_GET(LGM_PWM_FAN_DC_MSK, val);
+	state->duty_cycle = DIV_ROUND_UP(duty * pc->period, LGM_PWM_MAX_DUTY_CYCLE);
+}
+
+static const struct pwm_ops lgm_pwm_ops = {
+	.get_state = lgm_pwm_get_state,
+	.apply = lgm_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static void lgm_pwm_init(struct lgm_pwm_chip *pc)
+{
+	struct regmap *regmap = pc->regmap;
+	u32 con0_val;
+
+	con0_val = FIELD_PREP(LGM_PWM_FAN_MODE_MSK, LGM_PWM_FAN_MODE_2WIRE);
+	pc->period = LGM_PWM_PERIOD_2WIRE_NS;
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON1, LGM_PWM_FAN_MAX_RPM_MSK,
+			   LGM_PWM_DEFAULT_RPM);
+	regmap_update_bits(regmap, LGM_PWM_FAN_CON0, LGM_PWM_FAN_MODE_MSK,
+			   con0_val);
+}
+
+static const struct regmap_config lgm_pwm_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+};
+
+static void lgm_clk_disable(void *data)
+{
+	struct lgm_pwm_chip *pc = data;
+
+	clk_disable_unprepare(pc->clk);
+}
+
+static int lgm_clk_enable(struct device *dev, struct lgm_pwm_chip *pc)
+{
+	int ret;
+
+	ret = clk_prepare_enable(pc->clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_clk_disable, pc);
+}
+
+static void lgm_reset_control_assert(void *data)
+{
+	struct lgm_pwm_chip *pc = data;
+
+	reset_control_assert(pc->rst);
+}
+
+static int lgm_reset_control_deassert(struct device *dev, struct lgm_pwm_chip *pc)
+{
+	int ret;
+
+	ret = reset_control_deassert(pc->rst);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, lgm_reset_control_assert, pc);
+}
+
+static int lgm_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lgm_pwm_chip *pc;
+	void __iomem *io_base;
+	int ret;
+
+	pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, pc);
+
+	io_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(io_base))
+		return PTR_ERR(io_base);
+
+	pc->regmap = devm_regmap_init_mmio(dev, io_base, &lgm_pwm_regmap_config);
+	if (IS_ERR(pc->regmap))
+		return dev_err_probe(dev, PTR_ERR(pc->regmap),
+				     "failed to init register map\n");
+
+	pc->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pc->clk))
+		return dev_err_probe(dev, PTR_ERR(pc->clk), "failed to get clock\n");
+
+	ret = lgm_clk_enable(dev, pc);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	pc->rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(pc->rst))
+		return dev_err_probe(dev, PTR_ERR(pc->rst),
+				     "failed to get reset control\n");
+
+	ret = lgm_reset_control_deassert(dev, pc);
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot deassert reset control\n");
+
+	pc->chip.dev = dev;
+	pc->chip.ops = &lgm_pwm_ops;
+	pc->chip.npwm = 1;
+
+	lgm_pwm_init(pc);
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(dev, "failed to add PWM chip: %pe\n", ERR_PTR(ret));
+		return ret;
+	}
+
+	return 0;
+}
+
+static int lgm_pwm_remove(struct platform_device *pdev)
+{
+	struct lgm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	return pwmchip_remove(&pc->chip);
+}
+
+static const struct of_device_id lgm_pwm_of_match[] = {
+	{ .compatible = "intel,lgm-pwm" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lgm_pwm_of_match);
+
+static struct platform_driver lgm_pwm_driver = {
+	.driver = {
+		.name = "intel-pwm",
+		.of_match_table = lgm_pwm_of_match,
+	},
+	.probe = lgm_pwm_probe,
+	.remove = lgm_pwm_remove,
+};
+module_platform_driver(lgm_pwm_driver);
-- 
2.11.0


  parent reply	other threads:[~2020-09-15  8:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1600158087.git.rahul.tanwar@linux.intel.com>
2020-09-15  8:23 ` [PATCH v13 1/2] Add DT bindings YAML schema for PWM fan controller of LGM SoC Rahul Tanwar
2020-09-15  8:23 ` Rahul Tanwar [this message]
2020-09-24  6:55   ` [PATCH v13 2/2] Add PWM fan controller driver for " Uwe Kleine-König
2020-09-24  7:12     ` Thierry Reding
2020-09-24  7:38       ` Tanwar, Rahul
2020-09-24 13:23     ` Andy Shevchenko
2020-09-24 14:16       ` Uwe Kleine-König
2020-09-25  8:39         ` Andy Shevchenko
2020-09-28  6:45         ` Thierry Reding
2020-09-25  8:49     ` Tanwar, Rahul
2020-09-23 11:49 ` [PATCH v13 0/2] pwm: intel: Add PWM driver for a new SoC Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=befa655d8beb326fc8aa405a25a8b3e62b7e6a4a.1600158087.git.rahul.tanwar@linux.intel.com \
    --to=rahul.tanwar@linux.intel.com \
    --cc=andriy.shevchenko@intel.com \
    --cc=cheol.yong.kim@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=qi-ming.wu@intel.com \
    --cc=rahul.tanwar.linux@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=rtanwar@maxlinear.com \
    --cc=songjun.Wu@intel.com \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.