[Bug 106589] HP w2207 monitor not waking from sleep

* [Bug 106589] HP w2207 monitor not waking from sleep
@ 2018-05-21  1:55 bugzilla-daemon
  2018-05-21  1:55 ` bugzilla-daemon
                   ` (10 more replies)
  0 siblings, 11 replies; 12+ messages in thread
From: bugzilla-daemon @ 2018-05-21  1:55 UTC (permalink / raw)
  To: dri-devel

[-- Attachment #1.1: Type: text/plain, Size: 2365 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=106589

            Bug ID: 106589
           Summary: HP w2207 monitor not waking from sleep
           Product: DRI
           Version: unspecified
          Hardware: x86-64 (AMD64)
                OS: Linux (All)
            Status: NEW
          Severity: normal
          Priority: medium
         Component: DRM/AMDgpu
          Assignee: dri-devel@lists.freedesktop.org
          Reporter: tseewald@gmail.com

Created attachment 139653
  --> https://bugs.freedesktop.org/attachment.cgi?id=139653&action=edit
dmesg on 4.17-rc6

Problem:
After allowing both of my monitors to go to sleep, my HP w2207 is no longer
detected as being connected to the computer, and cannot be woken up. Its
display cable must be removed and reinserted into my AMD gpu for it to be
detected.

Expected:
The monitor, like my other samsung, will wake up and the OS will see it as
connected.

Why I think this is possible to fix in software:
The problem does not occur when using my 660Ti with Nvidia's 390.x driver.

Hardware:
GPU: RX 560 4GB
Monitor 1: HP w2207 (Affected)
Monitor 2: Samsung S23A700 (*Not* affected)

I have tried DVI->DVI and DVI->HDMI cables with the HP w2207, no change in
behavior.

The monitor will not wake even when it is the only monitor connected.

I have tested another monitor (an ancient 4:3 dell) in conjunction with the
S23A700, and both wake normally.

Software:
Mesa version: 18.0
X11 version: 1.19.6
Kernel commandline: See attachment for one example (I have tried disabling
amdgpu.dpm and amdgpu.dc to no effect)
EDID: See attachments
Kernel config: see attachments

The only dmesg output before and after the sleep is:
[drm] SADs count is: -2, don't need to read it
[drm] SADs count is: -2, don't need to read it

Kernels tested:
4.16.9
4.16.10
4.17-rc6
amd-drm-staging-next (current as of May 18th 2018)

No changes between any of them.

I also see that the kernel renames the display after a reconnect, I'm not sure
if that is normal either.

e.g. 

At boot: card1-HDMI-A-3
After unplugging/replugging: card1-HDMI-A-4

Please let me know what additional information or troubleshooting steps you
would like me to take.

Thanks for your time.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3783 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 12+ messages in thread