[Bug 110830] New: [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[Bug 110830] New: [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 3050 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

            Bug ID: 110830
           Summary: [nouveau] GeForce GTX 1660 Ti (mobile) not supported
                    (NV168/TU116)
           Product: xorg
           Version: 7.7 (2012.06)
          Hardware: Other
                OS: All
            Status: NEW
          Severity: normal
          Priority: medium
         Component: Driver/nouveau
          Assignee: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
          Reporter: mszpak-5tc4TXWwyLM@public.gmane.org
        QA Contact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org

The GeForce GTX 1660 Ti mobile card doesn't seem to be supported by nouveau:
> kernel: ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181213/nsarguments-59)
> kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20181213/nsarguments-59)
> kernel: pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
> kernel: VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
> kernel: nouveau: detected PR support, will not use DSM
> kernel: nouveau 0000:01:00.0: enabling device (0106 -> 0107)
> kernel: nouveau 0000:01:00.0: unknown chipset (168000a1)
> kernel: nouveau: probe of 0000:01:00.0 failed with error -12

Linux starts up with the Intel card, but unfortunately in Hyperbook NH5/Clevo
NH55RCQ the HDMI output seems to be wired to NVidia card :-/, so I cannot
external display with nouveau.

More information about my hardware:
> $ lspci | grep -i nvidia
> 01:00.0 VGA compatible controller: NVIDIA Corporation TU116M [GeForce GTX 1660 Mobile] (rev a1)
> 01:00.1 Audio device: NVIDIA Corporation Device 1aeb (rev a1)
> 01:00.2 USB controller: NVIDIA Corporation Device 1aec (rev a1)
> 01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1aed (rev a1)

(Output for lspcii -vv)
> 01:00.0 VGA compatible controller: NVIDIA Corporation TU116M [GeForce GTX 1660 Mobile] (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: CLEVO/KAPOK Computer Device 8550
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at b3000000 (32-bit, non-prefetchable) [size=16M]
>	Memory at a0000000 (64-bit, prefetchable) [size=256M]
>	Memory at b0000000 (64-bit, prefetchable) [size=32M]
>	I/O ports at 4000 [size=128]
>	Expansion ROM at b2000000 [disabled] [size=512K]
>	Capabilities: <access denied>
>	Kernel modules: nouveau

A quick search [1] suggests that preliminary support for TU117 exists in master
and TU116 might be added once required hardware is accessible. I'm creating
this ticket to make it easier to track progress of adding support for TU116 in
nouveau.

Tested with Fedora 30 with kernel 5.0.9-301.fc30.x86_64.

[1] -
https://github.com/torvalds/linux/commit/f266fdc7609a416c4f9c64f25930958717fa1bd7

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 4599 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 536 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org

--- Comment #1 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
CC: Ben Skeggs

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1840 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 501 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #2 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
With a kernel with TU117 support, boot with

nouveau.config=NvChipset=0x167

And see if it Just Works (tm). (Note that the NvChipset thing is quite new, and
is in the commit right before TU117 support... otherwise you could go down to
TU102, which appears to be ~the same.)

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1291 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 5530 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #3 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
I managed to build 5.2.0-0.rc3.git2.1.fc30.x86_64 on Fedora 30 and boot with
overridden NvChipset (0x167). The nouveau module is loaded, the card is visible
by vgaswitcheroo, but I cannot switch to it (nor force to turn it on).

> # lsmod | grep nouveau
> nouveau              2293760  1
> ttm                   122880  1 nouveau
> i2c_algo_bit           16384  2 i915,nouveau
> drm_kms_helper        225280  2 i915,nouveau
> mxm_wmi                16384  1 nouveau
> drm                   577536  15 drm_kms_helper,i915,ttm,nouveau
> video                  53248  2 i915,nouveau
> wmi                    36864  4 intel_wmi_thunderbolt,wmi_bmof,mxm_wmi,nouveau

> # cat /sys/kernel/debug/vgaswitcheroo/switch
> 0:IGD:+:Pwr:0000:00:02.0
> 1:DIS: :DynPwr:0000:01:00.0
> 2:DIS-Audio: :DynOff:0000:01:00.1

On:
> echo ON > /sys/kernel/debug/vgaswitcheroo/switch

there is no effect. On:

> echo DIS > /sys/kernel/debug/vgaswitcheroo/switch

I see an error in the system logs:
> kernel: vga_switcheroo: client 0 refused switch

The initialization logs on boot:
> kernel: MXM: GUID detected in BIOS
> kernel: ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190509/nsargume>
> kernel: ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20190509/nsa>
> kernel: pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
> kernel: VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
> kernel: nouveau: detected PR support, will not use DSM
> kernel: nouveau 0000:01:00.0: enabling device (0106 -> 0107)
> kernel: checking generic (90000000 7e9000) vs hw (a0000000 10000000)
> kernel: checking generic (90000000 7e9000) vs hw (b0000000 2000000)
> kernel: nouveau 0000:01:00.0: CHIPSET OVERRIDE: 168000a1 -> 167000a1
> kernel: nouveau 0000:01:00.0: NVIDIA TU117 (167000a1)
> kernel: nvme nvme0: missing or invalid SUBNQN field.
> kernel: nvme nvme0: Shutdown timeout set to 8 seconds
> kernel: nvme nvme0: 12/0/0 default/read/poll queues
> kernel: checking generic (90000000 7e9000) vs hw (90000000 10000000)
> kernel: fb0: switching to inteldrmfb from EFI VGA
> kernel: Console: switching to colour dummy device 80x25
> kernel: i915 0000:00:02.0: vgaarb: deactivate vga console
> kernel: nouveau 0000:01:00.0: bios: version 90.16.26.00.11
> kernel: nouveau 0000:01:00.0: fb: 6144 MiB GDDR6
> kernel:  nvme0n1: p1 p2 p3
> kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> kernel: [drm] Driver supports precise vblank timestamp query.
> kernel: i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
> kernel: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
> systemd-udevd[578]: Using default interface naming scheme 'v240'.
> kernel: vga_switcheroo: enabled
> kernel: [TTM] Zone  kernel: Available graphics memory: 8042942 KiB
> kernel: [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
> kernel: [TTM] Initializing pool allocator
> kernel: [TTM] Initializing DMA pool allocator
> kernel: nouveau 0000:01:00.0: DRM: VRAM: 6144 MiB
> kernel: nouveau 0000:01:00.0: DRM: GART: 536870912 MiB
> kernel: nouveau 0000:01:00.0: DRM: BIT table 'A' not found
> kernel: nouveau 0000:01:00.0: DRM: BIT table 'L' not found
> kernel: nouveau 0000:01:00.0: DRM: TMDS table version 2.0
> kernel: nouveau 0000:01:00.0: DRM: DCB version 4.1
> kernel: nouveau 0000:01:00.0: DRM: DCB outp 00: 02002f52 00020010
> kernel: nouveau 0000:01:00.0: DRM: DCB outp 01: 04814f76 04600010
> kernel: nouveau 0000:01:00.0: DRM: DCB outp 02: 04814f72 00020010
> kernel: nouveau 0000:01:00.0: DRM: DCB conn 02: 00010261
> kernel: nouveau 0000:01:00.0: DRM: DCB conn 04: 01000446
> kernel: nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
> kernel: nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
> kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> kernel: [drm] Driver supports precise vblank timestamp query.
> kernel: [drm] Initialized i915 1.6.0 20190417 for 0000:00:02.0 on minor 0
> kernel: [drm] Cannot find any crtc or sizes
> kernel: ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
> kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input12
> kernel: [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
> kernel: ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
> kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13
> kernel: fbcon: i915drmfb (fb0) is primary device
> kernel: Console: switching to colour frame buffer device 240x67
> kernel: [drm] Cannot find any crtc or sizes
> kernel: i915 0000:00:02.0: fb0: i915drmfb frame buffer device
> kernel: psmouse serio2: synaptics: queried max coordinates: x [..5658], y [..4722]
> kernel: [drm] Cannot find any crtc or sizes

There are also no reported providers in xrandr:
> $ xrandr --listproviders
> Providers: number: 0

I don't know if it is related to the chipset itself or to my laptop
configuration. The same situation is with with 0x167 and 0x162.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 6769 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 935 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #4 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
Of course it didn't make sense to turn it on, as it was already turned on
(DynPwr) in my case :) ). I can switch it off with vgaswitcheroo (or at least
to be reported as DynOff - I will check it later with powertop) when no
external output is connected. And what I missed in my previous comment - the
external monitor works out-of-box, which is nice progress.

Later on I will try to play with DRI_PRIME to enable also rendering with the
NVidia card.

What could be the side effects of:
> kernel: nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
?

And, in general, thanks for you suggestion with NvChipset :). If you would like
to test anything else on that hardware, please let me know.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1760 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1175 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #5 from Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> ---
(In reply to Marcin Zajaczkowski from comment #4)
> Of course it didn't make sense to turn it on, as it was already turned on
> (DynPwr) in my case :) ). I can switch it off with vgaswitcheroo (or at
> least to be reported as DynOff - I will check it later with powertop) when
> no external output is connected. And what I missed in my previous comment -
> the external monitor works out-of-box, which is nice progress.
> 
> Later on I will try to play with DRI_PRIME to enable also rendering with the
> NVidia card.
> 
> What could be the side effects of:
> > kernel: nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
That's expected at this point. We don't have firmware available to enable
acceleration yet. 
 Support for Turing is limited to modesetting currently. 

> ?
> 
> And, in general, thanks for you suggestion with NvChipset :). If you would
> like to test anything else on that hardware, please let me know.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2102 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1589 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #6 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to Marcin Zajaczkowski from comment #4)
> Of course it didn't make sense to turn it on, as it was already turned on
> (DynPwr) in my case :) ). I can switch it off with vgaswitcheroo (or at
> least to be reported as DynOff - I will check it later with powertop) when
> no external output is connected. And what I missed in my previous comment -
> the external monitor works out-of-box, which is nice progress.

vgaswitcheroo explicit control is for hard muxes. These were popular 2005 to
2010 or so. You just have 2 GPUs. vgaswitcheroo reports whether they're on or
off, but that control is performed dynamically by the driver based on usage.

> 
> Later on I will try to play with DRI_PRIME to enable also rendering with the
> NVidia card.
> 
> What could be the side effects of:
> > kernel: nouveau 0000:01:00.0: DRM: failed to create kernel channel, -22
> ?

No acceleration. This means that DRI_PRIME will not do anything.

> There are also no reported providers in xrandr:
> > $ xrandr --listproviders
> > Providers: number: 0

This is incredibly odd -- there must always be at least 1! Are you running
Xwayland or something? If so, the displays would be controlled through your
wayland compositor. You can check that kms is working:

grep . /sys/class/drm/card*-*/status

You should see some card0-* and card1-* entries.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2557 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 2691 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #7 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
(In reply to Ilia Mirkin from comment #6)
> (In reply to Marcin Zajaczkowski from comment #4)
> > Of course it didn't make sense to turn it on, as it was already turned on
> > (DynPwr) in my case :) ). I can switch it off with vgaswitcheroo (or at
> > least to be reported as DynOff - I will check it later with powertop) when
> > no external output is connected. And what I missed in my previous comment -
> > the external monitor works out-of-box, which is nice progress.
> 
> vgaswitcheroo explicit control is for hard muxes. These were popular 2005 to
> 2010 or so. You just have 2 GPUs. vgaswitcheroo reports whether they're on
> or off, but that control is performed dynamically by the driver based on
> usage.

You are right. Afew seconds after an external monitor is disconnected the
discrete card becomes DynOff.

I have a hard mux in my (quite) old Asus. I can use only the Intel card to save
energy and the Nvidia card is used only occasionally for CUDA and gaming. I
wonder why in multiple laptops nowadays the outputs are wired to one card
limiting the aforementioned use case? What are the benefits of that (assuming
the modern Intel can handle 3 displays enabled at the same time)?

> > There are also no reported providers in xrandr:
> > > $ xrandr --listproviders
> > > Providers: number: 0
> 
> This is incredibly odd -- there must always be at least 1! Are you running
> Xwayland or something? If so, the displays would be controlled through your
> wayland compositor. You can check that kms is working:

Yes, it was Wayland. With Xorg I see two providers:

> Providers: number : 2
> Provider 0: id: 0x6b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 3 associated providers: 1 name:modesetting
> Provider 1: id: 0x45 cap: 0x2, Sink Output crtcs: 4 outputs: 2 associated providers: 1 name:modesetting

Hmm, why there are 3 and 4 outputs associated to them? Is it possible that DP
output is accessible with the Intel card only (I don't have a connector right
here to test it organoleptically)?

> 
> grep . /sys/class/drm/card*-*/status
> 
> You should see some card0-* and card1-* entries.

Yes, I see different outputs.
> /sys/class/drm/card0-DP-1/status:disconnected
> /sys/class/drm/card0-eDP-1/status:connected
> /sys/class/drm/card0-HDMI-A-1/status:disconnected
> /sys/class/drm/card1-DP-2/status:disconnected
> /sys/class/drm/card1-HDMI-A-2/status:disconnected

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3825 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 703 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #8 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
I know about a lack of acceleration, but I wanted to test offloading with
NVidia GPU. I doesn't seem to work:

> $ glxinfo | grep "OpenGL vendor string"
> OpenGL vendor string: Intel Open Source Technology Center
> $ DRI_PRIME=1 glxinfo | grep "OpenGL vendor string"
> libGL error: failed to create dri screen
> libGL error: failed to load driver: nouveau
> OpenGL vendor string: VMware, Inc.

Can it be specific to my graphic card or rather some Xorg/Wayland related
stuff?

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1563 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1558 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #9 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to Marcin Zajaczkowski from comment #7)
> > Providers: number : 2
> > Provider 0: id: 0x6b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 3 associated providers: 1 name:modesetting
> > Provider 1: id: 0x45 cap: 0x2, Sink Output crtcs: 4 outputs: 2 associated providers: 1 name:modesetting
> 
> Hmm, why there are 3 and 4 outputs associated to them? Is it possible that
> DP output is accessible with the Intel card only (I don't have a connector
> right here to test it organoleptically)?

"crtcs: 4; outputs: 2". All modern NVIDIA GPU's have 4 CRTC's. You can see the
full list of outputs with that grep command you ran.

You can now slave the nvidia GPU's outputs to the primary (intel) GPU:

xrandr --setprovideroutputsource 1 0

which should allow you to drive on your NVIDIA GPU's outputs by configuring
them in xrandr.

This should also be possible with a Wayland compositor, however the specifics
will vary by compositor. Xwayland has no ability to control screen setup.

(In reply to Marcin Zajaczkowski from comment #8)
> I know about a lack of acceleration, but I wanted to test offloading with
> NVidia GPU. I doesn't seem to work:

Lack of acceleration = no opengl, or anything else which requires the GPU to
execute things in the "graphics" engine.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2540 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 2183 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #10 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
(In reply to Ilia Mirkin from comment #9)
> (In reply to Marcin Zajaczkowski from comment #7)
> > > Providers: number : 2
> > > Provider 0: id: 0x6b cap: 0xf, Source Output, Sink Output, Source Offload, Sink Offload crtcs: 3 outputs: 3 associated providers: 1 name:modesetting
> > > Provider 1: id: 0x45 cap: 0x2, Sink Output crtcs: 4 outputs: 2 associated providers: 1 name:modesetting
> > 
> > Hmm, why there are 3 and 4 outputs associated to them? Is it possible that
> > DP output is accessible with the Intel card only (I don't have a connector
> > right here to test it organoleptically)?
> 
> "crtcs: 4; outputs: 2". All modern NVIDIA GPU's have 4 CRTC's. You can see
> the full list of outputs with that grep command you ran.
> 
> You can now slave the nvidia GPU's outputs to the primary (intel) GPU:
> 
> xrandr --setprovideroutputsource 1 0
> 
> which should allow you to drive on your NVIDIA GPU's outputs by configuring
> them in xrandr.

In lxqt (with Openbox) after that command and "xrandr --output HDMI-1-2 --auto
--right-of eDP-1" the external monitor is turned on and I see a mouse cursor
there, but no window is rendered.

In Gnome 3 (with xorg) the external monitor is detected automatically, but the
effect is the same - black screen with a mouse cursor.

Can it be related to the fact that NVidia providers reports only "Sink Output",
but not offloading?

> This should also be possible with a Wayland compositor, however the
> specifics will vary by compositor. Xwayland has no ability to control screen
> setup.

In Wayland the external monitor works out-of-box in Gnome 3. However, I have
problem with bringing it to live with Xorg server (some tools I use don't like
Wayland). Is it possible to force LXQT or Gnome 3 (on xorg) to render also on
the external screen?

I've read about some issues with Windows Manager and "offloading", but though
it only applies to OpenGL-based output with PRIME=1.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3247 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 2205 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #11 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to Marcin Zajaczkowski from comment #10)
> (In reply to Ilia Mirkin from comment #9)
> > xrandr --setprovideroutputsource 1 0
> > 
> > which should allow you to drive on your NVIDIA GPU's outputs by configuring
> > them in xrandr.
> 
> In lxqt (with Openbox) after that command and "xrandr --output HDMI-1-2
> --auto --right-of eDP-1" the external monitor is turned on and I see a mouse
> cursor there, but no window is rendered.
> 
> In Gnome 3 (with xorg) the external monitor is detected automatically, but
> the effect is the same - black screen with a mouse cursor.

I've seen a bunch of reports of this recently. It's not any issue with nouveau
kernel component itself, I think it's an Xorg issue. Try using a redirecting
compositor. Or not using one. Or using modesetting ddx. Or using nouveau ddx.

The lack of acceleration on TU* might also be playing into this. Not sure.

> 
> Can it be related to the fact that NVidia providers reports only "Sink
> Output", but not offloading?
> 
> > This should also be possible with a Wayland compositor, however the
> > specifics will vary by compositor. Xwayland has no ability to control screen
> > setup.
> 
> In Wayland the external monitor works out-of-box in Gnome 3. However, I have
> problem with bringing it to live with Xorg server (some tools I use don't
> like Wayland). Is it possible to force LXQT or Gnome 3 (on xorg) to render
> also on the external screen?
> 
> I've read about some issues with Windows Manager and "offloading", but
> though it only applies to OpenGL-based output with PRIME=1.

Offloading is usually meant as "perform rendering on secondary GPU, display on
primary GPU". This is what something like DRI_PRIME controls (i.e. which GPU
performs rendering for a particular application).

You want the inverse -- you want your primary GPU to generate images to be
displayed on a secondary GPUs outputs. In Xorg this is referred to as "reverse
PRIME".

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3285 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 1031 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #12 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
Thanks for your explanations.

In the meantime, I've tried (recommended) KWin with LXQT (both XRender nad
OpenGL), but with no effects. I will try to explore it at the Xorg/Window
Manager side (or stick to Wayland for awhile)...

However, I have one more question about the nouveau driver itself. I tried to
switch from the "modesetting" driver to intel/nouveau in the xorg
configuration. However, trying to define 'Driver "nouveau"' I end up with the
error that device 167 is not known. I've seen you commit from January [1]. Is
it just needed to add a new entry for my GTX 1660 in nv_driver.c? Anyway, do
you think using nouveau_drv.so instead of "modesetting" can change anything?

[1] -
https://cgit.freedesktop.org/nouveau/xf86-video-nouveau/commit/?id=2376d1ebf2d9a96bc2ebf21d53a9f9841ce5c15b

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1978 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 691 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #13 from Ilia Mirkin <imirkin-FrUbXkNCsVf2fBVCVOL8/A@public.gmane.org> ---
(In reply to Marcin Zajaczkowski from comment #12)
> [1]. Is it just needed to add a new entry for my GTX 1660 in nv_driver.c?

Mmmmaybe. You'd have to kill Accel for it too, since none of the other
functions will work either.

> Anyway, do you think using nouveau_drv.so instead of "modesetting" can
> change anything?

Not in the reverse prime case -- it can only make things worse. IIRC
nouveau_drv expects acceleration support for handling reverse prime.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1598 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 836 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #14 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
To summarize the things. The offloading problem still needs to be examined at
the software level (it works only in Wayland). However, there is a workaround.
In the end, it turned out and in a model with GTX 1660 Ti, the mDP port is
connected to the Intel card. The external monitor works fine with a mDP->HDMI
adapter (with the NVidia card reported as DynOff).

@Ilia, thanks for your assistance!

Btw, it's too late for 5.2, but maybe GTX 1660 Ti will be natively supported
with nouveau (although "nouveau.config=NvChipset=0x167" works fine as a
workaround - probably the same stable as with GTX 1650 :) ).

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1648 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 494 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

--- Comment #15 from Marcin Zajaczkowski <mszpak-5tc4TXWwyLM@public.gmane.org> ---
Btw, for people with the same laptop and similar issues landing in that issue -
I created a short summary how to solve some problems with Hyperbook NH5/Clevo
NH55RCQ (including those with GeForce GTX 1660 Ti):
https://gist.github.com/szpak/71081b40217fb27c7a565b8c7b972067

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 1366 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau

[Bug 110830] [nouveau] GeForce GTX 1660 Ti (mobile) not supported (NV168/TU116)

[bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ]

[-- Attachment #1.1: Type: text/plain, Size: 872 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=110830

Martin Peres <martin.peres-GANU6spQydw@public.gmane.org> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
         Resolution|---                         |MOVED
             Status|NEW                         |RESOLVED

--- Comment #16 from Martin Peres <martin.peres-GANU6spQydw@public.gmane.org> ---
-- GitLab Migration Automatic Message --

This bug has been migrated to freedesktop.org's GitLab instance and has been
closed from further activity.

You can subscribe and participate further through the new bug through this link
to our GitLab instance:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-nouveau/issues/488.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 2471 bytes --]

[-- Attachment #2: Type: text/plain, Size: 153 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau