* [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller
@ 2010-03-24 16:38 bugzilla-daemon
2010-03-24 18:16 ` Douglas Gilbert
` (6 more replies)
0 siblings, 7 replies; 9+ messages in thread
From: bugzilla-daemon @ 2010-03-24 16:38 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
Summary: doesn't allow SMART-passthrough on Adaptec Series 5
controller
Product: SCSI Drivers
Version: 2.5
Kernel Version: 2.6.33
Platform: All
OS/Version: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: AACRAID
AssignedTo: scsi_drivers-aacraid@kernel-bugs.osdl.org
ReportedBy: lkolbe@techfak.uni-bielefeld.de
CC: sfrey@techfak.uni-bielefeld.de
Regression: No
On Linux 2.6.33, wich includes aacraid version 24702 (that's at least what
Adaptec's arcconf tells me), we're unable to query the smart information (SATA
disks attached to an Adaptec 52445):
wash:~# smartctl -a -d sat /dev/sg5
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31000340NS
Serial Number: 9QJ2XFQP
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Mar 24 16:33:07 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
SMART Disabled. Use option -s with argument 'on' to enable it.
If I try with '-s on' I get:
wash:~# smartctl -a -d sat -s on /dev/sg5
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST31000340NS
Serial Number: 9QJ2XFQP
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Mar 24 16:33:25 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Disabled. Use option -s with argument 'on' to enable it.
dmesg says:
[77323.301112] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
[descriptor]
[77323.301120] Descriptor sense data with sense descriptors (in hex):
[77323.301122] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[77323.301130] 00 4f 00 c2 40 50
[77323.301134] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
available
[77335.412005] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
[descriptor]
[77335.412012] Descriptor sense data with sense descriptors (in hex):
[77335.412014] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[77335.412022] 00 4f 00 c2 40 50
[77335.412026] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
available
[77353.712031] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
[descriptor]
[77353.712044] Descriptor sense data with sense descriptors (in hex):
[77353.712046] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
[77353.712052] 00 4f 00 c2 40 50
[77353.712055] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
available
On 2.6.32, we can use the aacraid driver from adaptec (version 24900) and
smartmontools work as expected, but with 2.6.33 their version doesn't compile
anymore.
We really don't want to run their 'enterprise' storage manager software on our
servers to warn us about bad blocks, but as long as we're unable to use
smartctl for this we're quite out of luck :/
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
@ 2010-03-24 18:16 ` Douglas Gilbert
2010-03-24 18:17 ` [Bug 15623] " bugzilla-daemon
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Douglas Gilbert @ 2010-03-24 18:16 UTC (permalink / raw)
To: bugzilla-daemon; +Cc: linux-scsi
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=15623
>
> Summary: doesn't allow SMART-passthrough on Adaptec Series 5
> controller
> Product: SCSI Drivers
> Version: 2.5
> Kernel Version: 2.6.33
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: AACRAID
> AssignedTo: scsi_drivers-aacraid@kernel-bugs.osdl.org
> ReportedBy: lkolbe@techfak.uni-bielefeld.de
> CC: sfrey@techfak.uni-bielefeld.de
> Regression: No
>
>
> On Linux 2.6.33, wich includes aacraid version 24702 (that's at least what
> Adaptec's arcconf tells me), we're unable to query the smart information (SATA
> disks attached to an Adaptec 52445):
>
> wash:~# smartctl -a -d sat /dev/sg5
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: ST31000340NS
> Serial Number: 9QJ2XFQP
> Firmware Version: SN06
> User Capacity: 1,000,204,886,016 bytes
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 4
> Local Time is: Wed Mar 24 16:33:07 2010 UTC
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> SMART Disabled. Use option -s with argument 'on' to enable it.
>
> If I try with '-s on' I get:
>
> wash:~# smartctl -a -d sat -s on /dev/sg5
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: ST31000340NS
> Serial Number: 9QJ2XFQP
> Firmware Version: SN06
> User Capacity: 1,000,204,886,016 bytes
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 4
> Local Time is: Wed Mar 24 16:33:25 2010 UTC
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF ENABLE/DISABLE COMMANDS SECTION ===
> SMART Enabled.
> SMART Disabled. Use option -s with argument 'on' to enable it.
>
> dmesg says:
>
> [77323.301112] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
> [descriptor]
> [77323.301120] Descriptor sense data with sense descriptors (in hex):
> [77323.301122] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [77323.301130] 00 4f 00 c2 40 50
> [77323.301134] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
> available
> [77335.412005] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
> [descriptor]
> [77335.412012] Descriptor sense data with sense descriptors (in hex):
> [77335.412014] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [77335.412022] 00 4f 00 c2 40 50
> [77335.412026] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
> available
> [77353.712031] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
> [descriptor]
> [77353.712044] Descriptor sense data with sense descriptors (in hex):
> [77353.712046] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [77353.712052] 00 4f 00 c2 40 50
> [77353.712055] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
> available
>
> On 2.6.32, we can use the aacraid driver from adaptec (version 24900) and
> smartmontools work as expected, but with 2.6.33 their version doesn't compile
> anymore.
>
> We really don't want to run their 'enterprise' storage manager software on our
> servers to warn us about bad blocks, but as long as we're unable to use
> smartctl for this we're quite out of luck :/
So in lk 2.6.32 aacraid driver version 24900 was used
successfully but with lk 2.6.33 the aacraid driver
version reverted to 24702 and didn't work. It might be
interesting to find the aacraid changelog between those
two versions.
Anyway the kernel messages shown by dmesg are just
noise and should disappear in lk 2.6.34 .
IOW "ATA pass through information available" indicates
normal operation of SAT.
smartctl will provide more debug information if a
'-r ioctl,3' option is added.
Doug Gilbert
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
2010-03-24 18:16 ` Douglas Gilbert
@ 2010-03-24 18:17 ` bugzilla-daemon
2010-03-24 18:45 ` bugzilla-daemon
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: bugzilla-daemon @ 2010-03-24 18:17 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
--- Comment #1 from Anonymous Emailer <anonymous@kernel-bugs.osdl.org> 2010-03-24 18:17:03 ---
Reply-To: dgilbert@interlog.com
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=15623
>
> Summary: doesn't allow SMART-passthrough on Adaptec Series 5
> controller
> Product: SCSI Drivers
> Version: 2.5
> Kernel Version: 2.6.33
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: AACRAID
> AssignedTo: scsi_drivers-aacraid@kernel-bugs.osdl.org
> ReportedBy: lkolbe@techfak.uni-bielefeld.de
> CC: sfrey@techfak.uni-bielefeld.de
> Regression: No
>
>
> On Linux 2.6.33, wich includes aacraid version 24702 (that's at least what
> Adaptec's arcconf tells me), we're unable to query the smart information (SATA
> disks attached to an Adaptec 52445):
>
> wash:~# smartctl -a -d sat /dev/sg5
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: ST31000340NS
> Serial Number: 9QJ2XFQP
> Firmware Version: SN06
> User Capacity: 1,000,204,886,016 bytes
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 4
> Local Time is: Wed Mar 24 16:33:07 2010 UTC
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> SMART Disabled. Use option -s with argument 'on' to enable it.
>
> If I try with '-s on' I get:
>
> wash:~# smartctl -a -d sat -s on /dev/sg5
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
> === START OF INFORMATION SECTION ===
> Device Model: ST31000340NS
> Serial Number: 9QJ2XFQP
> Firmware Version: SN06
> User Capacity: 1,000,204,886,016 bytes
> Device is: Not in smartctl database [for details use: -P showall]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 4
> Local Time is: Wed Mar 24 16:33:25 2010 UTC
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF ENABLE/DISABLE COMMANDS SECTION ===
> SMART Enabled.
> SMART Disabled. Use option -s with argument 'on' to enable it.
>
> dmesg says:
>
> [77323.301112] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
> [descriptor]
> [77323.301120] Descriptor sense data with sense descriptors (in hex):
> [77323.301122] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [77323.301130] 00 4f 00 c2 40 50
> [77323.301134] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
> available
> [77335.412005] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
> [descriptor]
> [77335.412012] Descriptor sense data with sense descriptors (in hex):
> [77335.412014] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [77335.412022] 00 4f 00 c2 40 50
> [77335.412026] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
> available
> [77353.712031] scsi 0:1:2:0: [sg5] Sense Key : Recovered Error [current]
> [descriptor]
> [77353.712044] Descriptor sense data with sense descriptors (in hex):
> [77353.712046] 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
> [77353.712052] 00 4f 00 c2 40 50
> [77353.712055] scsi 0:1:2:0: [sg5] Add. Sense: ATA pass through information
> available
>
> On 2.6.32, we can use the aacraid driver from adaptec (version 24900) and
> smartmontools work as expected, but with 2.6.33 their version doesn't compile
> anymore.
>
> We really don't want to run their 'enterprise' storage manager software on our
> servers to warn us about bad blocks, but as long as we're unable to use
> smartctl for this we're quite out of luck :/
So in lk 2.6.32 aacraid driver version 24900 was used
successfully but with lk 2.6.33 the aacraid driver
version reverted to 24702 and didn't work. It might be
interesting to find the aacraid changelog between those
two versions.
Anyway the kernel messages shown by dmesg are just
noise and should disappear in lk 2.6.34 .
IOW "ATA pass through information available" indicates
normal operation of SAT.
smartctl will provide more debug information if a
'-r ioctl,3' option is added.
Doug Gilbert
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
2010-03-24 18:16 ` Douglas Gilbert
2010-03-24 18:17 ` [Bug 15623] " bugzilla-daemon
@ 2010-03-24 18:45 ` bugzilla-daemon
2010-03-25 21:41 ` Douglas Gilbert
2010-03-25 21:42 ` bugzilla-daemon
` (3 subsequent siblings)
6 siblings, 1 reply; 9+ messages in thread
From: bugzilla-daemon @ 2010-03-24 18:45 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
--- Comment #2 from lkolbe@techfak.uni-bielefeld.de 2010-03-24 18:45:10 ---
> So in lk 2.6.32 aacraid driver version 24900 was used
> successfully but with lk 2.6.33 the aacraid driver
> version reverted to 24702 and didn't work. It might be
> interesting to find the aacraid changelog between those
> two versions.
I wonder as well. Vanilla 2.6.32 has aacraid version 2461 (IIRC), vanilla
2.6.33 has 24702, and Adaptec upstream has 24900, which is what they recommend
for using for the 'enterprise'. I have no idea about the politics side of this,
if there is any. There must be some reason why vanilla doesn't include 24900 by
default, though - it was released in 9/2009 IIRC.
> Anyway the kernel messages shown by dmesg are just
> noise and should disappear in lk 2.6.34 .
> IOW "ATA pass through information available" indicates
> normal operation of SAT.
Great, less noise ;)
> smartctl will provide more debug information if a
> '-r ioctl,3' option is added.
good to know, output follows:
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
Allen
Home page is http://smartmontools.sourceforge.net/
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=12 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20
20 51 39 32 4a 46 58 50 51 00 00 00 00 04 00 4e 53
30 36 30 20 20 20 20 54 53 31 33 30 30 33 30 30 34
40 53 4e 20 20 20 20 20 20 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 05 00 00 40 00 40 00
a0 f0 01 29 00 6b 34 01 7d 23 41 49 34 01 bc 23 41
b0 7f 40 61 00 61 00 00 00 fe ff 00 00 00 fe 00 00
c0 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 50 00 c5 af 10 7e 93
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40
f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
016-031: 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20
032-047: 51 39 32 4a 46 58 50 51 00 00 00 00 04 00 4e 53
048-063: 36 30 20 20 20 20 54 53 31 33 30 30 33 30 30 34
064-079: 53 4e 20 20 20 20 20 20 20 20 20 20 20 20 20 20
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
096-111: 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
112-127: 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 00
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 1f 00 06 05 00 00 40 00 40 00
160-175: f0 01 29 00 6b 34 01 7d 23 41 49 34 01 bc 23 41
176-191: 7f 40 61 00 61 00 00 00 fe ff 00 00 00 fe 00 00
192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 50 00 c5 af 10 7e 93
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40
240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 21 00 b0 6d 70 74 b0 6d 70 74 20 20 02 00 40 01
272-287: 00 01 00 50 06 3c 0a 3c 00 00 3c 00 00 00 08 00
288-303: 00 00 00 00 0f 00 80 02 00 00 00 00 08 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 27 00 80
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 10 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 20 1c 00 00 00 00 00 00 00 00 10 10 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 77
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
=== START OF INFORMATION SECTION ===
Device Model: ST31000340NS
Serial Number: 9QJ2XFQP
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Mar 24 18:40:13 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
REPORT-IOCTL: DeviceFD=3 Command=SMART ENABLE
[ata pass-through(16): 85 06 0c 00 d8 00 00 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=20 milliseconds resid=0
status=0x0
REPORT-IOCTL: DeviceFD=3 Command=SMART ENABLE returned 0
SMART Enabled.
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x7, driver_status=0x8
info=0x1 duration=104 milliseconds resid=0
sat_command_interface: do_scsi_cmnd_io() failed, status=-5
REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS returned -1
SMART Disabled. Use option -s with argument 'on' to enable it.
> Doug Gilbert
Kind regards,
Lukas
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 18:45 ` bugzilla-daemon
@ 2010-03-25 21:41 ` Douglas Gilbert
0 siblings, 0 replies; 9+ messages in thread
From: Douglas Gilbert @ 2010-03-25 21:41 UTC (permalink / raw)
To: bugzilla-daemon; +Cc: linux-scsi
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=15623
>
>
>
>
>
> --- Comment #2 from lkolbe@techfak.uni-bielefeld.de 2010-03-24 18:45:10 ---
>> So in lk 2.6.32 aacraid driver version 24900 was used
>> successfully but with lk 2.6.33 the aacraid driver
>> version reverted to 24702 and didn't work. It might be
>> interesting to find the aacraid changelog between those
>> two versions.
>
> I wonder as well. Vanilla 2.6.32 has aacraid version 2461 (IIRC), vanilla
> 2.6.33 has 24702, and Adaptec upstream has 24900, which is what they recommend
> for using for the 'enterprise'. I have no idea about the politics side of this,
> if there is any. There must be some reason why vanilla doesn't include 24900 by
> default, though - it was released in 9/2009 IIRC.
>
>> Anyway the kernel messages shown by dmesg are just
>> noise and should disappear in lk 2.6.34 .
>> IOW "ATA pass through information available" indicates
>> normal operation of SAT.
>
> Great, less noise ;)
>
>> smartctl will provide more debug information if a
>> '-r ioctl,3' option is added.
>
> good to know, output follows:
>
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
>
> REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
> [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
> scsi_status=0x0, host_status=0x0, driver_status=0x0
> info=0x0 duration=12 milliseconds resid=0
> Incoming data, len=512 [only first 256 bytes shown]:
<snip>
> REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS
> [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
> scsi_status=0x2, host_status=0x7, driver_status=0x8
The aacraid driver could not handle this command.
host_status=0x7 is DID_ERROR which is an internal
driver (aacraid) error.
What is being done by smartmontools is defined in
the SAT standard.
> info=0x1 duration=104 milliseconds resid=0
> sat_command_interface: do_scsi_cmnd_io() failed, status=-5
> REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS returned -1
> SMART Disabled. Use option -s with argument 'on' to enable it.
Doug Gilbert
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
` (2 preceding siblings ...)
2010-03-24 18:45 ` bugzilla-daemon
@ 2010-03-25 21:42 ` bugzilla-daemon
2010-03-30 6:24 ` bugzilla-daemon
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: bugzilla-daemon @ 2010-03-25 21:42 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
--- Comment #3 from Anonymous Emailer <anonymous@kernel-bugs.osdl.org> 2010-03-25 21:42:14 ---
Reply-To: dgilbert@interlog.com
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=15623
>
>
>
>
>
> --- Comment #2 from lkolbe@techfak.uni-bielefeld.de 2010-03-24 18:45:10 ---
>> So in lk 2.6.32 aacraid driver version 24900 was used
>> successfully but with lk 2.6.33 the aacraid driver
>> version reverted to 24702 and didn't work. It might be
>> interesting to find the aacraid changelog between those
>> two versions.
>
> I wonder as well. Vanilla 2.6.32 has aacraid version 2461 (IIRC), vanilla
> 2.6.33 has 24702, and Adaptec upstream has 24900, which is what they recommend
> for using for the 'enterprise'. I have no idea about the politics side of this,
> if there is any. There must be some reason why vanilla doesn't include 24900 by
> default, though - it was released in 9/2009 IIRC.
>
>> Anyway the kernel messages shown by dmesg are just
>> noise and should disappear in lk 2.6.34 .
>> IOW "ATA pass through information available" indicates
>> normal operation of SAT.
>
> Great, less noise ;)
>
>> smartctl will provide more debug information if a
>> '-r ioctl,3' option is added.
>
> good to know, output follows:
>
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
>
> REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
> [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
> scsi_status=0x0, host_status=0x0, driver_status=0x0
> info=0x0 duration=12 milliseconds resid=0
> Incoming data, len=512 [only first 256 bytes shown]:
<snip>
> REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS
> [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
> scsi_status=0x2, host_status=0x7, driver_status=0x8
The aacraid driver could not handle this command.
host_status=0x7 is DID_ERROR which is an internal
driver (aacraid) error.
What is being done by smartmontools is defined in
the SAT standard.
> info=0x1 duration=104 milliseconds resid=0
> sat_command_interface: do_scsi_cmnd_io() failed, status=-5
> REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS returned -1
> SMART Disabled. Use option -s with argument 'on' to enable it.
Doug Gilbert
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
` (3 preceding siblings ...)
2010-03-25 21:42 ` bugzilla-daemon
@ 2010-03-30 6:24 ` bugzilla-daemon
2010-03-30 10:52 ` bugzilla-daemon
2013-12-10 18:16 ` bugzilla-daemon
6 siblings, 0 replies; 9+ messages in thread
From: bugzilla-daemon @ 2010-03-30 6:24 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
--- Comment #4 from Anonymous Emailer <anonymous@kernel-bugs.osdl.org> 2010-03-30 06:24:01 ---
Reply-To: Mahesh_Rajashekhara@adaptec.com
Hi All,
We've identified the root cause for this problem.
Root cause:
This issue is specific to ATA pass-through "CC" bit handling in driver.
The in kernel tree driver(build: 24702), the below mentioned conditions were
not handled.
1. When the CC bit is SET by the host in ATA pass thru CDB, driver is supposed
to return DID_OK.
2. When the CC bit is RESET by the host, driver should return DID_ERROR.
We're working on this issue high priority and in the process of preparing the
driver patch to address this problem.
Thanks,
Mahesh R
-----Original Message-----
From: bugzilla-daemon@bugzilla.kernel.org
[mailto:bugzilla-daemon@bugzilla.kernel.org]
Sent: Friday, March 26, 2010 3:12 AM
To: AACRAID
Subject: [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5
controller
https://bugzilla.kernel.org/show_bug.cgi?id=15623
--- Comment #3 from Anonymous Emailer <anonymous@kernel-bugs.osdl.org>
2010-03-25 21:42:14 ---
Reply-To: dgilbert@interlog.com
bugzilla-daemon@bugzilla.kernel.org wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=15623
>
>
>
>
>
> --- Comment #2 from lkolbe@techfak.uni-bielefeld.de 2010-03-24 18:45:10 ---
>> So in lk 2.6.32 aacraid driver version 24900 was used
>> successfully but with lk 2.6.33 the aacraid driver
>> version reverted to 24702 and didn't work. It might be
>> interesting to find the aacraid changelog between those
>> two versions.
>
> I wonder as well. Vanilla 2.6.32 has aacraid version 2461 (IIRC), vanilla
> 2.6.33 has 24702, and Adaptec upstream has 24900, which is what they recommend
> for using for the 'enterprise'. I have no idea about the politics side of this,
> if there is any. There must be some reason why vanilla doesn't include 24900 by
> default, though - it was released in 9/2009 IIRC.
>
>> Anyway the kernel messages shown by dmesg are just
>> noise and should disappear in lk 2.6.34 .
>> IOW "ATA pass through information available" indicates
>> normal operation of SAT.
>
> Great, less noise ;)
>
>> smartctl will provide more debug information if a
>> '-r ioctl,3' option is added.
>
> good to know, output follows:
>
> smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
>
> REPORT-IOCTL: DeviceFD=3 Command=IDENTIFY DEVICE
> [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
> scsi_status=0x0, host_status=0x0, driver_status=0x0
> info=0x0 duration=12 milliseconds resid=0
> Incoming data, len=512 [only first 256 bytes shown]:
<snip>
> REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS
> [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
> scsi_status=0x2, host_status=0x7, driver_status=0x8
The aacraid driver could not handle this command.
host_status=0x7 is DID_ERROR which is an internal
driver (aacraid) error.
What is being done by smartmontools is defined in
the SAT standard.
> info=0x1 duration=104 milliseconds resid=0
> sat_command_interface: do_scsi_cmnd_io() failed, status=-5
> REPORT-IOCTL: DeviceFD=3 Command=SMART STATUS returned -1
> SMART Disabled. Use option -s with argument 'on' to enable it.
Doug Gilbert
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
` (4 preceding siblings ...)
2010-03-30 6:24 ` bugzilla-daemon
@ 2010-03-30 10:52 ` bugzilla-daemon
2013-12-10 18:16 ` bugzilla-daemon
6 siblings, 0 replies; 9+ messages in thread
From: bugzilla-daemon @ 2010-03-30 10:52 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
--- Comment #5 from lkolbe@techfak.uni-bielefeld.de 2010-03-30 10:52:08 ---
fyi: It seems that smartmontools 5.39 are able to extract the SMART-Data using
aacraid 24702:
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
REPORT-IOCTL: Device=/dev/sg5 Command=IDENTIFY DEVICE
Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=8 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20
20 51 39 32 4a 46 58 50 51 00 00 00 00 04 00 4e 53
30 36 30 20 20 20 20 54 53 31 33 30 30 33 30 30 34
40 53 4e 20 20 20 20 20 20 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 00
80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
90 00 00 00 00 00 00 1f 00 06 05 00 00 40 00 40 00
a0 f0 01 29 00 6b 34 01 7d 23 41 49 34 01 bc 23 41
b0 7f 40 61 00 61 00 00 00 fe ff 00 00 00 fe 00 00
c0 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 50 00 c5 af 10 7e 93
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40
f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=IDENTIFY DEVICE returned 0
===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
016-031: 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20
032-047: 51 39 32 4a 46 58 50 51 00 00 00 00 04 00 4e 53
048-063: 36 30 20 20 20 20 54 53 31 33 30 30 33 30 30 34
064-079: 53 4e 20 20 20 20 20 20 20 20 20 20 20 20 20 20
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
096-111: 00 00 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
112-127: 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 00
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 1f 00 06 05 00 00 40 00 40 00
160-175: f0 01 29 00 6b 34 01 7d 23 41 49 34 01 bc 23 41
176-191: 7f 40 61 00 61 00 00 00 fe ff 00 00 00 fe 00 00
192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 50 00 c5 af 10 7e 93
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40
240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 21 00 b0 6d 70 74 b0 6d 70 74 20 20 02 00 40 01
272-287: 00 01 00 50 06 3c 0a 3c 00 00 3c 00 00 00 08 00
288-303: 00 00 00 00 0f 00 80 02 00 00 00 00 08 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 27 00 80
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 10 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 20 1c 00 00 00 00 00 00 00 00 10 10 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 77
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda ES.2
Device Model: ST31000340NS
Serial Number: 9QJ2XFQP
Firmware Version: SN06
User Capacity: 1,000,204,886,016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Tue Mar 30 10:46:32 2010 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
REPORT-IOCTL: Device=/dev/sg5 Command=SMART STATUS
Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 0c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=56 milliseconds resid=0
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART STATUS returned 0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART STATUS CHECK
Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
[ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x2, host_status=0x7, driver_status=0x8
info=0x1 duration=76 milliseconds resid=0
>>> Sense buffer, len=22:
00 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
10 00 4f 00 c2 40 50
status=2: [desc] sense_key=1 asc=0 ascq=1d
Values from ATA Return Descriptor are:
00 09 0c 00 00 00 00 00 00 00 4f 00 c2 40 50
Output: ERR=0x00, SC=0x00, LL=0x00, LM=0x4f, LH=0xc2, DEV=0x40, STS=0x50
REPORT-IOCTL: Device=/dev/sg5 Command=SMART STATUS CHECK returned 0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ ATTRIBUTE VALUES
Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=84 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 0f 00 51 3f ac ef 34 07 00 00 00 03 03
10 00 63 62 00 00 00 00 00 00 00 04 32 00 64 64 17
20 00 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00
30 00 00 07 0f 00 51 3c e9 fa 3d 07 00 00 00 09 32
40 00 5a 5a 38 23 00 00 00 00 00 0a 13 00 64 64 00
50 00 00 00 00 00 00 0c 32 00 64 25 17 00 00 00 00
60 00 00 b8 32 00 64 64 00 00 00 00 00 00 00 bb 32
70 00 64 64 00 00 00 00 00 00 00 bc 32 00 64 48 33
80 00 25 00 1f 00 00 bd 3a 00 62 62 02 00 00 00 00
90 00 00 be 22 00 42 3f 22 00 21 24 00 00 00 c2 22
a0 00 22 28 22 00 00 00 0f 00 00 c3 1a 00 38 1b ac
b0 ef 34 07 00 00 00 c5 12 00 64 64 00 00 00 00 00
c0 00 00 c6 10 00 64 64 00 00 00 00 00 00 00 c7 3e
d0 00 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ ATTRIBUTE VALUES returned 0
===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 0a 00 01 0f 00 51 3f ac ef 34 07 00 00 00 03 03
016-031: 00 63 62 00 00 00 00 00 00 00 04 32 00 64 64 17
032-047: 00 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00
048-063: 00 00 07 0f 00 51 3c e9 fa 3d 07 00 00 00 09 32
064-079: 00 5a 5a 38 23 00 00 00 00 00 0a 13 00 64 64 00
080-095: 00 00 00 00 00 00 0c 32 00 64 25 17 00 00 00 00
096-111: 00 00 b8 32 00 64 64 00 00 00 00 00 00 00 bb 32
112-127: 00 64 64 00 00 00 00 00 00 00 bc 32 00 64 48 33
128-143: 00 25 00 1f 00 00 bd 3a 00 62 62 02 00 00 00 00
144-159: 00 00 be 22 00 42 3f 22 00 21 24 00 00 00 c2 22
160-175: 00 22 28 22 00 00 00 0f 00 00 c3 1a 00 38 1b ac
176-191: ef 34 07 00 00 00 c5 12 00 64 64 00 00 00 00 00
192-207: 00 00 c6 10 00 64 64 00 00 00 00 00 00 00 c7 3e
208-223: 00 c8 c8 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 82 00 71 02 00 7b
368-383: 03 00 01 00 01 e2 02 00 00 00 00 00 00 00 00 00
384-399: 00 00 05 00 00 00 00 00 07 01 01 01 01 01 01 01
400-415: 01 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 72 1d 96 b2 85 1d 00 00
432-447: 00 00 00 00 01 00 ad da 12 db 18 fd 4c 0a 00 00
448-463: 21 31 38 07 89 df 04 00 00 00 00 00 db 5a 16 00
464-479: 00 00 00 00 00 00 00 00 1f 20 00 00 00 00 00 00
480-495: 17 00 00 00 0c 29 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fb
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ ATTRIBUTE THRESHOLDS
Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=12 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 01 00 01 2c 00 00 00 00 00 00 00 00 00 00 03 00
10 00 00 00 00 00 00 00 00 00 00 04 14 00 00 00 00
20 00 00 00 00 00 00 05 24 00 00 00 00 00 00 00 00
30 00 00 07 1e 00 00 00 00 00 00 00 00 00 00 09 00
40 00 00 00 00 00 00 00 00 00 00 0a 61 00 00 00 00
50 00 00 00 00 00 00 0c 14 00 00 00 00 00 00 00 00
60 00 00 b8 63 00 00 00 00 00 00 00 00 00 00 bb 00
70 00 00 00 00 00 00 00 00 00 00 bc 00 00 00 00 00
80 00 00 00 00 00 00 bd 00 00 00 00 00 00 00 00 00
90 00 00 be 2d 00 00 00 00 00 00 00 00 00 00 c2 00
a0 00 00 00 00 00 00 00 00 00 00 c3 00 00 00 00 00
b0 00 00 00 00 00 00 c5 00 00 00 00 00 00 00 00 00
c0 00 00 c6 00 00 00 00 00 00 00 00 00 00 00 c7 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ ATTRIBUTE THRESHOLDS returned
0
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) =====
000-015: 01 00 01 2c 00 00 00 00 00 00 00 00 00 00 03 00
016-031: 00 00 00 00 00 00 00 00 00 00 04 14 00 00 00 00
032-047: 00 00 00 00 00 00 05 24 00 00 00 00 00 00 00 00
048-063: 00 00 07 1e 00 00 00 00 00 00 00 00 00 00 09 00
064-079: 00 00 00 00 00 00 00 00 00 00 0a 61 00 00 00 00
080-095: 00 00 00 00 00 00 0c 14 00 00 00 00 00 00 00 00
096-111: 00 00 b8 63 00 00 00 00 00 00 00 00 00 00 bb 00
112-127: 00 00 00 00 00 00 00 00 00 00 bc 00 00 00 00 00
128-143: 00 00 00 00 00 00 bd 00 00 00 00 00 00 00 00 00
144-159: 00 00 be 2d 00 00 00 00 00 00 00 00 00 00 c2 00
160-175: 00 00 00 00 00 00 00 00 00 00 c3 00 00 00 00 00
176-191: 00 00 00 00 00 00 c5 00 00 00 00 00 00 00 00 00
192-207: 00 00 c6 00 00 00 00 00 00 00 00 00 00 00 c7 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c4
===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) =====
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 226) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 081 063 044 Pre-fail Always
- 120909740
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 23
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always
- 121502441
9 Power_On_Hours 0x0032 090 090 000 Old_age Always
- 9016
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always
- 23
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 072 000 Old_age Always
- 133146411059
189 High_Fly_Writes 0x003a 098 098 000 Old_age Always
- 2
190 Airflow_Temperature_Cel 0x0022 066 063 045 Old_age Always
- 34 (Lifetime Min/Max 33/36)
194 Temperature_Celsius 0x0022 034 040 000 Old_age Always
- 34 (0 15 0 0)
195 Hardware_ECC_Recovered 0x001a 056 027 000 Old_age Always
- 120909740
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ LOG InputParameter=1
Input: FR=0xd5, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=20 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Error Log Version: 1
No Errors Logged
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ LOG InputParameter=6
Input: FR=0xd5, SC=0x01, LL=0x06, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 06 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=56 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ LOG InputParameter=9
Input: FR=0xd5, SC=0x01, LL=0x09, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
[ata pass-through(16): 85 08 0e 00 d5 00 01 00 09 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=8 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
status=0x0
REPORT-IOCTL: Device=/dev/sg5 Command=SMART READ LOG returned 0
===== [SMART READ LOG] DATA START (BASE-16) =====
000-015: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff
===== [SMART READ LOG] DATA END (512 Bytes) =====
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Bug 15623] doesn't allow SMART-passthrough on Adaptec Series 5 controller
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
` (5 preceding siblings ...)
2010-03-30 10:52 ` bugzilla-daemon
@ 2013-12-10 18:16 ` bugzilla-daemon
6 siblings, 0 replies; 9+ messages in thread
From: bugzilla-daemon @ 2013-12-10 18:16 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=15623
Alan <alan@lxorguk.ukuu.org.uk> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |alan@lxorguk.ukuu.org.uk
Resolution|--- |OBSOLETE
Status|NEW |RESOLVED
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-12-10 18:16 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-03-24 16:38 [Bug 15623] New: doesn't allow SMART-passthrough on Adaptec Series 5 controller bugzilla-daemon
2010-03-24 18:16 ` Douglas Gilbert
2010-03-24 18:17 ` [Bug 15623] " bugzilla-daemon
2010-03-24 18:45 ` bugzilla-daemon
2010-03-25 21:41 ` Douglas Gilbert
2010-03-25 21:42 ` bugzilla-daemon
2010-03-30 6:24 ` bugzilla-daemon
2010-03-30 10:52 ` bugzilla-daemon
2013-12-10 18:16 ` bugzilla-daemon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.