[Bug 214197] New: [Asus G713QY] RX6800M not usable after exiting Vulkan application

[Bug 214197] New: [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

            Bug ID: 214197
           Summary: [Asus G713QY] RX6800M not usable after exiting Vulkan
                    application
           Product: Drivers
           Version: 2.5
    Kernel Version: 5.13.13
          Hardware: x86-64
                OS: Linux
              Tree: Mainline
            Status: NEW
          Severity: normal
          Priority: P1
         Component: Video(DRI - non Intel)
          Assignee: drivers_video-dri@kernel-bugs.osdl.org
          Reporter: velemas@gmail.com
        Regression: No

Asus ROG Strix G17 Advantage Edition (G713QY) has hybrid-graphics with dGPU
RX6800M. After exiting any Vulkan application, it becomes unusable. Vulkaninfo
sees dGPU before Vulkan app and does not see RX6800M after.

After Vulkan app close, dmesg reports:

[  154.385749] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not
available
[  154.401405] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta
ucode is not available
[  154.401409] amdgpu 0000:03:00.0: amdgpu: SMU is resuming...
[  159.038150] amdgpu 0000:03:00.0: amdgpu: message:        RunDcBtc (54)      
param: 0x00000000 is timeout (no response)
[  159.038154] amdgpu 0000:03:00.0: amdgpu: Failed to setup smc hw!
[  159.038156] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of
IP block <smu> failed -62
[  159.038220] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed
(-62).

Using amdgpu.runpm=0 parameter fixes the issue.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

Alex Deucher (alexdeucher@gmail.com) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |alexdeucher@gmail.com

--- Comment #1 from Alex Deucher (alexdeucher@gmail.com) ---
Please attach your full dmesg output from boot through the problematic case.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

--- Comment #2 from Alex Deucher (alexdeucher@gmail.com) ---
Does this patch fix the issue?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=202ead5a3c589b0594a75cb99f080174f6851fed

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

--- Comment #3 from velemas@gmail.com ---
Created attachment 298505
  --> https://bugzilla.kernel.org/attachment.cgi?id=298505&action=edit
full dmesg output

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

--- Comment #4 from velemas@gmail.com ---

(In reply to Alex Deucher from comment #2)
> Does this patch fix the issue?
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/
> ?id=202ead5a3c589b0594a75cb99f080174f6851fed

Kernel 5.13.13 has this patch already. So apparently it does not fix the
problem.
It occurs with radv, amdvlk, and amdvlk-pro. External monitor is attached via
HDMI (although it happens without ext. monitor too).

Sometimes dmesg does not contain above mentioned lines but dGPU is still
unusable. Sometimes DXVK delivers VK_ERROR_DEVICE_LOST status even during
runtime.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

Pablo Cholaky (waltercool@slash.cl) changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |waltercool@slash.cl

--- Comment #5 from Pablo Cholaky (waltercool@slash.cl) ---
Can confirm this issue as well under MSI Delta with RX6700M, in order to
discard any "laptop specific issue". Both are Zen3 Navi cards.

Now, while it doesn't break GPU usage, but its a waste of power resources.

This issue it's kinda common, even with kernel 5.15.0-rc5. I don't have any
steps to reproduce sadly.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

--- Comment #6 from Alex Deucher (alexdeucher@gmail.com) ---
Does this patch help?
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=60b78ed088ebe1a872ee1320b6c5ad6ee2c4bd9a

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

--- Comment #7 from velemas@gmail.com ---
Kernel 5.14.14 already has it but it's not fixed. I got mostly the same dmesg
message but somewhat different:

[  367.167527] amdgpu 0000:03:00.0: amdgpu: RAS: optional ras ta ucode is not
available
[  367.183399] amdgpu 0000:03:00.0: amdgpu: SECUREDISPLAY: securedisplay ta
ucode is not available
[  367.183406] amdgpu 0000:03:00.0: amdgpu: SMU is resuming...
[  371.863082] amdgpu 0000:03:00.0: amdgpu: Failed to setup smc hw!
[  371.863085] [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of
IP block <smu> failed -62
[  371.863147] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed
(-62).

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

--- Comment #8 from velemas@gmail.com ---
Recent kernels in 5.15.* and 5.16.* fix the issue for me.

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.

[Bug 214197] [Asus G713QY] RX6800M not usable after exiting Vulkan application

[bugzilla-daemon]

https://bugzilla.kernel.org/show_bug.cgi?id=214197

velemas@gmail.com changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEW                         |RESOLVED
         Resolution|---                         |OBSOLETE

-- 
You may reply to this email to add a comment.

You are receiving this mail because:
You are watching the assignee of the bug.