[Bug 67178] New: discrete radeon HD 6400M/7400M intense heating even though it's "off"

* [Bug 67178] New: discrete radeon HD 6400M/7400M intense heating even though it's "off"
@ 2013-07-22 15:04 bugzilla-daemon
  2013-07-22 17:03 ` [Bug 67178] " bugzilla-daemon
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: bugzilla-daemon @ 2013-07-22 15:04 UTC (permalink / raw)
  To: dri-devel

[-- Attachment #1.1: Type: text/plain, Size: 2397 bytes --]

https://bugs.freedesktop.org/show_bug.cgi?id=67178

          Priority: medium
            Bug ID: 67178
          Assignee: dri-devel@lists.freedesktop.org
           Summary: discrete radeon HD 6400M/7400M intense heating even
                    though it's "off"
          Severity: normal
    Classification: Unclassified
                OS: Linux (All)
          Reporter: tpo_deb@sourcepole.ch
          Hardware: x86-64 (AMD64)
            Status: NEW
           Version: XOrg CVS
         Component: DRM/Radeon
           Product: DRI

kernel 3.11-rc1 (also tested with 3.10 from Debian, 3.7, 3,2)

# lspci -vnnn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd
  Generation Core Processor Family Integrated Graphics Controller
  [8086:0116] (rev 09) (prog-if 00 [VGA controller])
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
  [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff)
  (prog-if ff)

This is a HP Pavillon dv7 6130ez

Sometimes, at random, the radeon card goes into full heat production mode. This
seems to occur a while (a few minutes?) after wakeup from resume, however I'm
not sure about that. Suspending and resuming the laptop a few times (1 <= x <=
~4) seems to calm the card down again.

Power consumption according to powertop goes from ~14W up to ~50W. This happens
even though the card should be in theory switched off. Aka:

  # cat /sys/kernel/debug/vgaswitcheroo/switch
  0:IGD:+:Pwr:0000:00:02.0
  1:DIS: :Off:0000:01:00.0

  # echo IGD > /sys/kernel/debug/vgaswitcheroo/switch
  # echo OFF > /sys/kernel/debug/vgaswitcheroo/switch

doesn't seem to have no effect whatsoever.

It *seems* that setting "radeon.dpm=1" kernel boot options and then:

  # echo "battery" > /sys/class/drm/card$no/device/power_dpm_state

puts the card in an "active" but "relatively low" power consumption mode. It is
then using about 20W (instead of the "normal" ~14W) so it's continuously faning
out slightly warm air. And it "seems that when the card is running in this
mode, then it won't get so often, or ever (I'm not very sure) into the berserk
heating mode.

The lowest observed power consumption of the laptop is ~7W. It'd be very nice
if it'd be possible to shut the card down electrically via software and stay in
this 7W mode.

-- 
You are receiving this mail because:
You are the assignee for the bug.

[-- Attachment #1.2: Type: text/html, Size: 3792 bytes --]

[-- Attachment #2: Type: text/plain, Size: 159 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 4+ messages in thread