All of lore.kernel.org
 help / color / mirror / Atom feed
* [dpdk-dev] [Bug 687] [dpdk-21.05] unit_tests_power/power_cpufreq: unit test failed
@ 2021-04-25  3:33 bugzilla
  0 siblings, 0 replies; only message in thread
From: bugzilla @ 2021-04-25  3:33 UTC (permalink / raw)
  To: dev

https://bugs.dpdk.org/show_bug.cgi?id=687

            Bug ID: 687
           Summary: [dpdk-21.05] unit_tests_power/power_cpufreq: unit test
                    failed
           Product: DPDK
           Version: unspecified
          Hardware: x86
                OS: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: Normal
         Component: other
          Assignee: dev@dpdk.org
          Reporter: zhiminx.huang@intel.com
  Target Milestone: ---

ENV:
DPDK version: 
dpdk-21.05-rc1: 1b593b9c832e9b284cc59665fe662242a3fc1daf
OS: CentOS Stream release 8/4.18.0-277.el8.x86_64
Compiler: gcc version 8.4.1 20200928 (Red Hat 8.4.1-1) (GCC)
Hardware platform: Intel(R) Xeon(R) Gold 6139 CPU @ 2.30GHz
NIC hardware: Intel Corporation Ethernet Controller E810-C for QSFP [8086:1592]
CVL100Gx2
NIC firmware: 
ice: 1.6.0_rc26_4_g2fb2c79e_dirty
firmware-version: 3.00 0x800071ff 1.2928.0
ICE OS Default Package version 1.3.26.0

Reproduced step:
1.
echo 2 > /sys/bus/pci/devices/0000\:81\:00.0/sriov_numvfs
2.
ip link set ens801f0 vf 0 trust on
3.
x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1,2,3,4 -n 4 -a
0000:81:01.0,cap=dcf -a 0000:81:01.1  --file-prefix=dpdk_11923_20210423100520  
-- -i
4.
flow validate 0 ingress pattern eth / ipv6 / udp / gtpu / ipv6 src is 2001::1 /
tcp dst is 23 / end actions vf id 1 / end

output:
RTE>>power_cpufreq_autotest
POWER: Env isn't set yet!
POWER: Attempting to initialise ACPI cpufreq power management...
POWER: Initialized successfully for lcore 2 power management
POWER: Power management governor of lcore 2 has been set back to  successfully
POWER: Power management of lcore 2 has exited from 'userspace' mode and been
set back to the original
POWER: Lcore id 128 can not exceeds 127
POWER: Initialized successfully for lcore 2 power management
POWER: Power management of lcore 2 is in use
POWER: Invalid lcore ID
POWER: NULL buffer supplied
POWER: Buffer size is not enough
POWER: Invalid lcore ID
POWER: Power management governor of lcore 2 has been set back to  successfully
POWER: Power management of lcore 2 has exited from 'userspace' mode and been
set back to the original
Test Failed

expected output:
RTE>>power_cpufreq_autotest
POWER: Env isn't set yet!
POWER: Attempting to initialise ACPI cpufreq power management...
POWER: Initialized successfully for lcore 2 power management
POWER: Power management governor of lcore 2 has been set back to  successfully
POWER: Power management of lcore 2 has exited from 'userspace' mode and been
set back to the original
POWER: Lcore id 128 can not exceeds 127
POWER: Initialized successfully for lcore 2 power management
POWER: Power management of lcore 2 is in use
POWER: Invalid lcore ID
POWER: NULL buffer supplied
POWER: Buffer size is not enough
POWER: Invalid lcore ID
POWER: Invalid lcore ID
POWER: Invalid frequency index 64, which should be less than 15
POWER: Invalid frequency index 15, which should be less than 15
POWER: Invalid lcore ID
POWER: Invalid lcore ID
POWER: Invalid lcore ID
POWER: Invalid lcore ID
POWER: Invalid lcore ID
POWER: Invalid lcore ID
POWER: Power management governor of lcore 2 has been set back to  successfully
POWER: Power management of lcore 2 has exited from 'userspace' mode and been
set back to the original
POWER: Power management of lcore 2 is not used
POWER: Lcore id 128 can not exceeds 127
Test OK

bad commit id:  606a234c6d3607c93a0426bdccdbf9aaa2b8e5f6

commit 606a234c6d3607c93a0426bdccdbf9aaa2b8e5f6 (refs/bisect/bad)
Author: Richael Zhuang <richael.zhuang@arm.com>
Date: Thu Apr 15 13:59:30 2021 +0800

test/power: round CPU frequency to check

The value in "/sys/.../cpuinfo_cur_freq" may not be exactly the
same as what was set. For example, if "2400000" is written to
"/sys/.../cpufreq/scaling_setspeed" to set the frequency, then the
value in "/sys/.../cpuinfo_cur_freq" may be "2401222". So need to
round the value.

Fixes: ed7c51a6a680 ("app/test: vm power management")
Cc: stable@dpdk.org

Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-by: David Hunt <david.hunt@intel.com>

diff --git a/app/test/test_power_cpufreq.c b/app/test/test_power_cpufreq.c
index d47b3e0a1a..f753d24ac5 100644
— a/app/test/test_power_cpufreq.c
+++ b/app/test/test_power_cpufreq.c

-- 
You are receiving this mail because:
You are the assignee for the bug.

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2021-04-25  3:33 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-25  3:33 [dpdk-dev] [Bug 687] [dpdk-21.05] unit_tests_power/power_cpufreq: unit test failed bugzilla

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.