* [Bug 72541] New: CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
@ 2014-03-20 12:57 bugzilla-daemon
2014-04-08 10:49 ` [Bug 72541] " bugzilla-daemon
0 siblings, 1 reply; 2+ messages in thread
From: bugzilla-daemon @ 2014-03-20 12:57 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=72541
Bug ID: 72541
Summary: CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS
host is non-operational !!!!
Product: SCSI Drivers
Version: 2.5
Kernel Version: 2.6.32-431
Hardware: x86-64
OS: Linux
Tree: Mainline
Status: NEW
Severity: high
Priority: P1
Component: Other
Assignee: scsi_drivers-other@kernel-bugs.osdl.org
Reporter: oleg.khrustov@gmail.com
Regression: No
Dell c5220
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.27.00.00
Firmware version : 14.00.02.00
Channel description : 1 Serial Attached SCSI
RAID1, 2xST9500620NS
Was running smoothly during 3 months machine finally stuck and/or rootfs
remounted to readonly.
Dmesg shows mpt2 sas errors.
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
mpt2sas0: _base_fault_reset_work: Running mpt2sas_dead_ioc thread success !!!!
mpt2sas0: IR shutdown (sending)
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 03 16 6a b8 00 00 18 00
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 03 d9 32 98 00 00 08 00
Buffer I/O error on device dm-0, logical block 7942227
lost page write due to I/O error on dm-0
JBD2: Detected IO errors while flushing file data on dm-0-8
Aborting journal on device dm-0-8.
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 03 13 b0 00 00 00 08 00
Buffer I/O error on device dm-0, logical block 6324224
lost page write due to I/O error on dm-0
JBD2: I/O error detected when updating journal superblock for dm-0-8.
EXT4-fs error (device dm-0): ext4_journal_start_sb: Detected aborted journal
EXT4-fs (dm-0): Remounting filesystem read-only
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 06 8e b6 00 00 00 08 00
Buffer I/O error on device dm-2, logical block 516288
lost page write due to I/O error on dm-2
JBD2: Detected IO errors while flushing file data on dm-2-8
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 1f 95 ba 40 00 00 10 00
Aborting journal on device dm-2-8.
sd 0:1:0:0: [sda] Unhandled error code
sd 0:1:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
sd 0:1:0:0: [sda] CDB: Write(10): 2a 00 1f 93 b0 00 00 00 08 00
Buffer I/O error on device dm-2, logical block 52985856
lost page write due to I/O error on dm-2
JBD2: I/O error detected when updating journal superblock for dm-2-8.
EXT4-fs error (device dm-2): ext4_journal_start_sb: Detected aborted journal
EXT4-fs (dm-2): Remounting filesystem read-only
mpt2sas0: _scsih_ir_shutdown: timeout
sd 0:1:0:0: RAID REMOVE
sd 0:1:0:0: RAID REMOVE DONE
mpt2sas0: removing handle(0x00aa), wwid(0x0d142348722f1016)
mpt2sas0: removing handle(0x0009), sas_addr(0x4433221100000000)
mpt2sas0: removing handle(0x000a), sas_addr(0x4433221101000000)
sd 0:0:2:0: [sdb] Synchronizing SCSI cache
sd 0:0:2:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
mpt2sas0: removing handle(0x000b), sas_addr(0x4433221102000000)
sd 0:0:3:0: [sdc] Synchronizing SCSI cache
sd 0:0:3:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
mpt2sas0: removing handle(0x000c), sas_addr(0x4433221103000000)
mpt2sas0: sending diag reset !!
mpt2sas0: diag reset: FAILED
mpt2sas 0000:01:00.0: PCI INT A disabled
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Bug 72541] CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!!
2014-03-20 12:57 [Bug 72541] New: CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!! bugzilla-daemon
@ 2014-04-08 10:49 ` bugzilla-daemon
0 siblings, 0 replies; 2+ messages in thread
From: bugzilla-daemon @ 2014-04-08 10:49 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=72541
Alan <alan@lxorguk.ukuu.org.uk> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
CC| |alan@lxorguk.ukuu.org.uk
Resolution|--- |OBSOLETE
--- Comment #1 from Alan <alan@lxorguk.ukuu.org.uk> ---
2.6.32 is years obsolete as far as upstream is concerned. Please take it up
with your vendor
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-04-08 10:49 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-03-20 12:57 [Bug 72541] New: CentOS 6.5 -- mpt2sas0: _base_fault_reset_work : SAS host is non-operational !!!! bugzilla-daemon
2014-04-08 10:49 ` [Bug 72541] " bugzilla-daemon
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.