* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
@ 2015-05-12 22:22 ` bugzilla-daemon
2015-05-12 22:28 ` [Bug 98171] New: " James Bottomley
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2015-05-12 22:22 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
nucrap@hotmail.com changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |nucrap@hotmail.com
Regression|No |Yes
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
2015-05-12 22:22 ` [Bug 98171] " bugzilla-daemon
@ 2015-05-12 22:28 ` James Bottomley
2015-06-29 22:27 ` [Bug 98171] " bugzilla-daemon
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: James Bottomley @ 2015-05-12 22:28 UTC (permalink / raw)
To: bugzilla-daemon; +Cc: linux-scsi, nucrap
On Tue, 2015-05-12 at 22:22 +0000, bugzilla-daemon@bugzilla.kernel.org
wrote:
> https://bugzilla.kernel.org/show_bug.cgi?id=98171
>
> Bug ID: 98171
> Summary: [Regression] Marvell SE91xx SATA 3 controllers not
> recognized correctly
> Product: SCSI Drivers
> Version: 2.5
> Kernel Version: 3.15
> Hardware: All
> OS: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Other
> Assignee: scsi_drivers-other@kernel-bugs.osdl.org
> Reporter: nucrap@hotmail.com
> Regression: No
>
> Created attachment 176571
> --> https://bugzilla.kernel.org/attachment.cgi?id=176571&action=edit
> full dmesg of my affected system
>
> Starting with kernel 3.15 Marvell SE91xx SATA 3 controllers are not getting
> recognized correctly. At early boot process, users get messages similar to
> this:
>
> kernel: ata16: EH complete
> kernel: ata16.00: configured for UDMA/66
> kernel: ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> kernel: ata16: hard resetting link
> kernel: ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
> res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
> kernel: cdb[0]=0x12: 12 01 00 00 ff 00
> kernel: scsi 15:0:0:0: CDB:
> kernel: ata16.00: irq_stat 0x40000001
> kernel: ata16.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6
> kernel: scsi 15:0:0:0: Processor Marvell 91xx Config 1.01 PQ: 0 ANSI: 5
> kernel: ata8: SATA link down (SStatus 0 SControl 300)
This is a regression against 3.14? There was only one change affecting
mvsas between those kernels and that was the libsas change:
commit bc6e7c4b0d1a1f742d96556f63d68f17f4e232c3
Author: Dan Williams <dan.j.williams@intel.com>
Date: Fri Mar 14 13:52:48 2014 -0700
libata, libsas: kill pm_result and related cleanup
Does reverting that make the problem go away?
James
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
2015-05-12 22:22 ` [Bug 98171] " bugzilla-daemon
2015-05-12 22:28 ` [Bug 98171] New: " James Bottomley
@ 2015-06-29 22:27 ` bugzilla-daemon
2015-06-30 10:48 ` bugzilla-daemon
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2015-06-29 22:27 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
--- Comment #1 from nucrap@hotmail.com ---
> This is a regression against 3.14? There was only one change affecting
> mvsas between those kernels and that was the libsas change:
>
> commit bc6e7c4b0d1a1f742d96556f63d68f17f4e232c3
> Author: Dan Williams <dan.j.williams@intel.com>
> Date: Fri Mar 14 13:52:48 2014 -0700
>
> libata, libsas: kill pm_result and related cleanup
>
> Does reverting that make the problem go away?
>
It's a regression starting with linux 3.15, meaning everything still worked
with linux 3.14.
I have tried reverting that patch from linux-3.15.10 vanilla sources but it
fails... I don't know why, maybe I'm just not leet enough:
Hunk #1 succeeded at 5364 (offset 13 lines).
Hunk #2 succeeded at 5388 (offset 13 lines).
Hunk #3 FAILED at 5390.
Hunk #4 succeeded at 5506 (offset 13 lines).
Hunk #5 succeeded at 5532 (offset 13 lines).
1 out of 5 hunks FAILED -- saving rejects to file drivers/ata/libata-core.c.rej
patching file drivers/ata/libata-eh.c
patching file drivers/scsi/libsas/sas_ata.c
patching file include/linux/libata.h
Hunk #1 succeeded at 850 (offset 2 lines).
Hunk #2 FAILED at 1140.
1 out of 2 hunks FAILED -- saving rejects to file include/linux/libata.h.rej
patching file include/scsi/libsas.h
patch unexpectedly ends in middle of line
Hunk #1 succeeded at 172 with fuzz 1.
What shall I do?
Regards,
Philip
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (2 preceding siblings ...)
2015-06-29 22:27 ` [Bug 98171] " bugzilla-daemon
@ 2015-06-30 10:48 ` bugzilla-daemon
2015-06-30 10:51 ` bugzilla-daemon
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2015-06-30 10:48 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
Tom Yan <tom.ty89@gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |tom.ty89@gmail.com
--- Comment #2 from Tom Yan <tom.ty89@gmail.com> ---
Why don't you get linux 3.14 (linux-lts in the current Arch) and patch it with
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/?id=bc6e7c4b0d1a1f742d96556f63d68f17f4e232c3
and see if it reproduce the issue?
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (3 preceding siblings ...)
2015-06-30 10:48 ` bugzilla-daemon
@ 2015-06-30 10:51 ` bugzilla-daemon
2015-08-08 23:58 ` bugzilla-daemon
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2015-06-30 10:51 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
--- Comment #3 from Tom Yan <tom.ty89@gmail.com> ---
By the way why would it be related to mvsas/libsas? Aren't those controllers
SATA ones which use the ahci driver?
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (4 preceding siblings ...)
2015-06-30 10:51 ` bugzilla-daemon
@ 2015-08-08 23:58 ` bugzilla-daemon
2016-01-19 14:33 ` bugzilla-daemon
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2015-08-08 23:58 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
Carlos Guidugli <guidugli@gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |guidugli@gmail.com
--- Comment #4 from Carlos Guidugli <guidugli@gmail.com> ---
Hi,
I am also having the same issue with Fedora 22, kernel 4.1.3-200.fc22.x86_64.
Any recommendations?
[ 0.828869] ata9: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610100
irq 35
[ 0.828873] ata10: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610180
irq 35
[ 0.828877] ata11: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610200
irq 35
[ 0.828880] ata12: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610280
irq 35
[ 0.828884] ata13: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610300
irq 35
[ 0.828887] ata14: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610380
irq 35
[ 0.828890] ata15: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610400
irq 35
[ 0.828894] ata16: SATA max UDMA/133 abar m2048@0xdf610000 port 0xdf610480
irq 35
[ 1.116331] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.117021] ata1.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.117026] ata1.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.118349] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119026] ata6.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.119031] ata6.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.119341] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.119346] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.119377] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.119394] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.119413] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119740] ata6.00: configured for UDMA/133
[ 1.120073] ata5.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.120078] ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.120798] ata5.00: configured for UDMA/133
[ 1.134350] ata14: SATA link down (SStatus 0 SControl 300)
[ 1.134376] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.134401] ata12: SATA link down (SStatus 0 SControl 300)
[ 1.134498] ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.134652] ata16.00: configured for UDMA/66
[ 1.136354] ata15: SATA link down (SStatus 0 SControl 300)
[ 1.136379] ata10: SATA link down (SStatus 0 SControl 300)
[ 1.136403] ata11: SATA link down (SStatus 0 SControl 300)
[ 1.136425] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.136446] ata13: SATA link down (SStatus 0 SControl 300)
[ 1.323489] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.327731] ata3.00: HPA detected: current 3907027055, native 3907029168
[ 1.327822] ata2.00: ATA-9: WDC WD60EFRX-68MYMN1, 82.00A82, max UDMA/133
[ 1.327827] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.327839] ata3.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 1.327844] ata3.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.327966] ata4.00: HPA detected: current 3907027055, native 3907029168
[ 1.328069] ata4.00: ATA-8: WDC WD20EARS-00S8B1, 80.00A80, max UDMA/133
[ 1.328073] ata4.00: 3907027055 sectors, multi 16: LBA48 NCQ (depth 31/32),
AA
[ 1.328281] ata1.00: configured for UDMA/133
[ 1.328518] scsi 0:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.328620] ata2.00: configured for UDMA/133
[ 1.328965] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.329004] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.329009] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.329214] sd 0:0:0:0: [sda] Write Protect is off
[ 1.329219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.329250] scsi 1:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.329348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.329652] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.329657] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.329669] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.329782] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.329788] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.329880] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.332247] ata3.00: configured for UDMA/133
[ 1.332429] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80
PQ: 0 ANSI: 5
[ 1.332811] sd 2:0:0:0: [sdc] 3907027055 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 1.332851] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.332899] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.332905] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.332970] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.332977] ata4.00: configured for UDMA/133
[ 1.333102] scsi 3:0:0:0: Direct-Access ATA WDC WD20EARS-00S 0A80
PQ: 0 ANSI: 5
[ 1.333464] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 1.333469] sd 3:0:0:0: [sdd] 3907027055 512-byte logical blocks: (2.00
TB/1.81 TiB)
[ 1.333623] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.333628] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.333674] scsi 4:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.333677] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.333991] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 1.334035] sd 4:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.334040] sd 4:0:0:0: [sde] 4096-byte physical blocks
[ 1.334180] sd 4:0:0:0: [sde] Write Protect is off
[ 1.334185] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 1.334231] scsi 5:0:0:0: Direct-Access ATA WDC WD60EFRX-68M 0A82
PQ: 0 ANSI: 5
[ 1.334233] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.334527] sd 5:0:0:0: [sdf] 11721045168 512-byte logical blocks: (6.00
TB/5.45 TiB)
[ 1.334532] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[ 1.334548] sd 5:0:0:0: Attached scsi generic sg5 type 0
[ 1.334647] sd 5:0:0:0: [sdf] Write Protect is off
[ 1.334653] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 1.334768] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.335031] scsi 15:0:0:0: Processor Marvell Console 1.01
PQ: 0 ANSI: 5
[ 1.346509] ata16.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 1.346662] ata16.00: irq_stat 0x40000001
[ 1.346796] ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma
16640 in
Inquiry 12 01 00 00 ff 00res
00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
[ 1.347344] ata16: hard resetting link
[ 1.350686] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.350688] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.354182] sd 5:0:0:0: [sdf] Attached SCSI disk
[ 1.355834] sd 4:0:0:0: [sde] Attached SCSI disk
[ 1.787613] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.788180] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.832932] ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.883536] ata16.00: configured for UDMA/66
[ 1.883621] ata16: EH complete
[ 1.883920] scsi 15:0:0:0: Attached scsi generic sg6 type 3
Have two Marvell controllers:
04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s
Controller (rev 11)
09:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s
Controller (rev 11)
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (5 preceding siblings ...)
2015-08-08 23:58 ` bugzilla-daemon
@ 2016-01-19 14:33 ` bugzilla-daemon
2016-02-02 8:01 ` bugzilla-daemon
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2016-01-19 14:33 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
Jürgen Hörmann <info@juergenhoermann.de> changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |info@juergenhoermann.de
--- Comment #5 from Jürgen Hörmann <info@juergenhoermann.de> ---
Having this issue too.
My apt database got corrupted while installing update packages.
[ 2.232046] ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 2.232054] ata14.00: irq_stat 0x40000001
[ 2.232067] ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma
16640 in
Inquiry 12 01 00 00 ff 00res
00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
My System: Ubuntu 15.10 64bit
Kernel: 4.2.0-23-generic
--
You are receiving this mail because:
You are watching the assignee of the bug.--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (6 preceding siblings ...)
2016-01-19 14:33 ` bugzilla-daemon
@ 2016-02-02 8:01 ` bugzilla-daemon
2016-02-05 16:20 ` bugzilla-daemon
2016-03-29 3:34 ` bugzilla-daemon
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2016-02-02 8:01 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
jrickman@myamigos.us changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |jrickman@myamigos.us
--- Comment #6 from jrickman@myamigos.us ---
I see almost the exact same error across multiple (qty 4, all the same HW
configs) Supermicro X10SBA motherboards that I have.
Jan 30 06:52:52 tank2 kernel: [ 1.689428] ata12.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6
Jan 30 06:52:52 tank2 kernel: [ 1.689430] ata12.00: irq_stat 0x40000001
Jan 30 06:52:52 tank2 kernel: [ 1.689440] ata12.00: cmd
a0/01:00:00:00:01/00:00:00:00:00/a0 tag 2 dma 16640 in
Jan 30 06:52:52 tank2 kernel: [ 1.689440] opcode=0x12 12 01 00 00
ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation)
Jan 30 06:52:52 tank2 kernel: [ 1.689446] ata12: hard resetting link
These motherboards use the Marvell 9230 chip to add 4 SATA ports to the 2 SATA
ports provided by the BayTrail SoC.
I can sometimes recreate this error when placing the filesystem under heavy
load. In this case it is a multi-terabyte ZFS "tank" and "zpool" is doing a
"scrub".
Gentoo Linux running gentoo-sources-4.1.15-r1
I do not remember when I first started to see this error appear.
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (7 preceding siblings ...)
2016-02-02 8:01 ` bugzilla-daemon
@ 2016-02-05 16:20 ` bugzilla-daemon
2016-03-29 3:34 ` bugzilla-daemon
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2016-02-05 16:20 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
--- Comment #7 from Clay Harris <bugs@claycon.org> ---
I'm seeing the following:
ata16: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata16.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
ata16.00: configured for UDMA/66
ata16.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x6
ata16.00: irq_stat 0x40000001
ata16.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 1 dma 16640 in
Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM
violation)
ata16: hard resetting link
Controller is:
a:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s
RAID controller with HyperDuo (rev 11) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard
Linux 4.3.4-300.fc23.x86_64
I see this error most every boot.
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread* [Bug 98171] [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly
2015-05-12 22:22 [Bug 98171] New: [Regression] Marvell SE91xx SATA 3 controllers not recognized correctly bugzilla-daemon
` (8 preceding siblings ...)
2016-02-05 16:20 ` bugzilla-daemon
@ 2016-03-29 3:34 ` bugzilla-daemon
9 siblings, 0 replies; 11+ messages in thread
From: bugzilla-daemon @ 2016-03-29 3:34 UTC (permalink / raw)
To: linux-scsi
https://bugzilla.kernel.org/show_bug.cgi?id=98171
amalea0@yahoo.com changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |amalea0@yahoo.com
--- Comment #8 from amalea0@yahoo.com ---
I am seeing the same error on my Xubuntu 15.10 system at every boot.
[ 1.707400] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.707518] ata14.00: ATAPI: MARVELL VIRTUALL, 1.09, max UDMA/66
[ 1.707679] ata14.00: configured for UDMA/66
[ 1.934951] ata14.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 1.934998] ata14.00: irq_stat 0x40000001
[ 1.935040] ata14.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 1 dma
16640 in Inquiry 12 01 00 00 ff 00res 00/00:00:00:00:00/00:00:00:00:00/00 Emask
0x3 (HSM violation)
[ 1.935089] ata14: hard resetting link
[ 2.262449] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.262751] ata14.00: configured for UDMA/66
[ 2.262825] ata14: EH complete
SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s
controller (rev 11)
Kernel: 4.2.0-34-generic #39-Ubuntu SMP Thu Mar 10 22:13:01 UTC 2016 x86_64
x86_64 x86_64 GNU/Linux (Xubuntu 15.10)
Motherboard: Gigabyte Technology Co., Ltd. GA-970A-UD3P
Hoping to see this issue addressed shortly.
--
You are receiving this mail because:
You are watching the assignee of the bug.
^ permalink raw reply [flat|nested] 11+ messages in thread