* [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model
@ 2014-09-19 4:54 Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer Alistair Francis
` (7 more replies)
0 siblings, 8 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch series adds the Netduino 2 Machine to QEMU
Information on the board is avalible at:
http://www.netduino.com/netduino2/specs.htm
The git tree can be found at:
https://github.com/alistair23/qemu/tree/netduino2.2
This is based on my original patch series to add the
Netduino Plus 2 Machine to QEMU. This can be seen at:
http://lists.nongnu.org/archive/html/qemu-devel/2014-08/msg04026.html
It is also based on my RFC patches, which can be seen at:
https://lists.nongnu.org/archive/html/qemu-devel/2014-09/msg01638.html
This patch series makes some changes to the armv7m_init function
that allows the code to be reused with the Netduino 2 and the
Stellaris machines.
Some example code that runs on QEMU is avaliable at:
at: https://github.com/alistair23/CSSE3010-QEMU-Examples
I have more devices in the works, I figured I would just start
with these three
V2:
- Fix up the Timer device
- Fix up the USART device
- Change the memory region names to match the Stellaris board
Changes from RFC:
- Code cleanup thanks to Peter C's comments
- Split the Makefile configs to device level
- Changes to armv7m_init with interupt and memory passing
- See the individual patches for more details
Alistair Francis (8):
stm32f205_timer: Add the stm32f205 Timer
stm32f205_USART: Add the stm32f205 USART Controller
stm32f205_SYSCFG: Add the stm32f205 SYSCFG
target_arm: Remove memory region init from armv7m_init
target_arm: Parameterise the irq lines for armv7m_init
target_arm: Change the reset values based on the ELF entry
stm32f205: Add the stm32f205 SoC
netduino2: Add the Netduino 2 Machine
default-configs/arm-softmmu.mak | 4 +
hw/arm/Makefile.objs | 2 +
hw/arm/armv7m.c | 45 +++---
hw/arm/netduino2.c | 54 +++++++
hw/arm/stellaris.c | 25 +++-
hw/arm/stm32f205_soc.c | 155 +++++++++++++++++++++
hw/char/Makefile.objs | 1 +
hw/char/stm32f205_usart.c | 218 +++++++++++++++++++++++++++++
hw/misc/Makefile.objs | 1 +
hw/misc/stm32f205_syscfg.c | 160 +++++++++++++++++++++
hw/timer/Makefile.objs | 2 +
hw/timer/stm32f205_timer.c | 279 +++++++++++++++++++++++++++++++++++++
include/hw/arm/arm.h | 2 +-
include/hw/arm/stm32f205_soc.h | 69 +++++++++
include/hw/char/stm32f205_usart.h | 69 +++++++++
include/hw/misc/stm32f205_syscfg.h | 61 ++++++++
include/hw/timer/stm32f205_timer.h | 101 ++++++++++++++
17 files changed, 1221 insertions(+), 27 deletions(-)
create mode 100644 hw/arm/netduino2.c
create mode 100644 hw/arm/stm32f205_soc.c
create mode 100644 hw/char/stm32f205_usart.c
create mode 100644 hw/misc/stm32f205_syscfg.c
create mode 100644 hw/timer/stm32f205_timer.c
create mode 100644 include/hw/arm/stm32f205_soc.h
create mode 100644 include/hw/char/stm32f205_usart.h
create mode 100644 include/hw/misc/stm32f205_syscfg.h
create mode 100644 include/hw/timer/stm32f205_timer.h
--
1.9.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-22 11:40 ` Peter Crosthwaite
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 2/8] stm32f205_USART: Add the stm32f205 USART Controller Alistair Francis
` (6 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch adds the stm32f205 timers: TIM2, TIM3, TIM4 and TIM5
to QEMU.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
PUBLIC
V2:
- Reorder the Makefile config
- Fix up the debug printing
- Correct the timer event trigger
Changes from RFC:
- Small changes to functionality and style. Thanks to Peter C
- Rename to make the timer more generic
- Split the config settings to device level
default-configs/arm-softmmu.mak | 1 +
hw/timer/Makefile.objs | 2 +
hw/timer/stm32f205_timer.c | 279 +++++++++++++++++++++++++++++++++++++
include/hw/timer/stm32f205_timer.h | 101 ++++++++++++++
4 files changed, 383 insertions(+)
create mode 100644 hw/timer/stm32f205_timer.c
create mode 100644 include/hw/timer/stm32f205_timer.h
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index f3513fa..cf23b24 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -78,6 +78,7 @@ CONFIG_NSERIES=y
CONFIG_REALVIEW=y
CONFIG_ZAURUS=y
CONFIG_ZYNQ=y
+CONFIG_STM32F205_TIMER=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
index 2c86c3d..4bd9617 100644
--- a/hw/timer/Makefile.objs
+++ b/hw/timer/Makefile.objs
@@ -31,3 +31,5 @@ obj-$(CONFIG_DIGIC) += digic-timer.o
obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o
+
+common-obj-$(CONFIG_STM32F205_TIMER) += stm32f205_timer.o
diff --git a/hw/timer/stm32f205_timer.c b/hw/timer/stm32f205_timer.c
new file mode 100644
index 0000000..37f2318
--- /dev/null
+++ b/hw/timer/stm32f205_timer.c
@@ -0,0 +1,279 @@
+/*
+ * STM32F205 Timer
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/timer/stm32f205_timer.h"
+
+#ifndef STM_TIMER_ERR_DEBUG
+#define STM_TIMER_ERR_DEBUG 0
+#endif
+
+#define DB_PRINT_L(lvl, fmt, args...) do { \
+ if (STM_TIMER_ERR_DEBUG >= lvl) { \
+ qemu_log("stm32f205_timer: %s:" fmt, __func__, ## args); \
+ } \
+} while (0);
+
+#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args)
+
+static void stm32f205_timer_set_alarm(STM32f205TimerState *s);
+
+static void stm32f205_timer_interrupt(void *opaque)
+{
+ STM32f205TimerState *s = opaque;
+
+ DB_PRINT("Interrupt\n");
+
+ if (s->tim_dier & TIM_DIER_UIE && s->tim_cr1 & TIM_CR1_CEN) {
+ s->tim_sr |= 1;
+ qemu_irq_pulse(s->irq);
+ stm32f205_timer_set_alarm(s);
+ }
+}
+
+static void stm32f205_timer_set_alarm(STM32f205TimerState *s)
+{
+ uint32_t ticks;
+ int64_t now;
+
+ DB_PRINT("Alarm raised at: 0x%x\n", s->tim_cr1);
+
+ now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ ticks = s->tim_arr - (s->tick_offset + (now * get_ticks_per_sec())) *
+ (s->tim_psc + 1);
+
+ DB_PRINT("Alarm set in %d ticks\n", ticks);
+
+ if (ticks == 0) {
+ timer_del(s->timer);
+ stm32f205_timer_interrupt(s);
+ } else {
+ timer_mod(s->timer, (now + (int64_t) ticks));
+ DB_PRINT("Wait Time: %" PRId64 "\n", now + (int64_t) ticks);
+ }
+}
+
+static void stm32f205_timer_reset(DeviceState *dev)
+{
+ STM32f205TimerState *s = STM32F205TIMER(dev);
+
+ s->tim_cr1 = 0;
+ s->tim_cr2 = 0;
+ s->tim_smcr = 0;
+ s->tim_dier = 0;
+ s->tim_sr = 0;
+ s->tim_egr = 0;
+ s->tim_ccmr1 = 0;
+ s->tim_ccmr2 = 0;
+ s->tim_ccer = 0;
+ s->tim_cnt = 0;
+ s->tim_psc = 0;
+ s->tim_arr = 0;
+ s->tim_ccr1 = 0;
+ s->tim_ccr2 = 0;
+ s->tim_ccr3 = 0;
+ s->tim_ccr4 = 0;
+ s->tim_dcr = 0;
+ s->tim_dmar = 0;
+ s->tim_or = 0;
+}
+
+static uint64_t stm32f205_timer_read(void *opaque, hwaddr offset,
+ unsigned size)
+{
+ STM32f205TimerState *s = opaque;
+
+ DB_PRINT("Read 0x%"HWADDR_PRIx"\n", offset);
+
+ switch (offset) {
+ case TIM_CR1:
+ return s->tim_cr1;
+ case TIM_CR2:
+ return s->tim_cr2;
+ case TIM_SMCR:
+ return s->tim_smcr;
+ case TIM_DIER:
+ return s->tim_dier;
+ case TIM_SR:
+ return s->tim_sr;
+ case TIM_EGR:
+ return s->tim_egr;
+ case TIM_CCMR1:
+ return s->tim_ccmr1;
+ case TIM_CCMR2:
+ return s->tim_ccmr2;
+ case TIM_CCER:
+ return s->tim_ccer;
+ case TIM_CNT:
+ s->tim_cnt = s->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
+ get_ticks_per_sec());
+ return s->tim_cnt;
+ case TIM_PSC:
+ return s->tim_psc;
+ case TIM_ARR:
+ return s->tim_arr;
+ case TIM_CCR1:
+ return s->tim_ccr1;
+ case TIM_CCR2:
+ return s->tim_ccr2;
+ case TIM_CCR3:
+ return s->tim_ccr3;
+ case TIM_CCR4:
+ return s->tim_ccr4;
+ case TIM_DCR:
+ return s->tim_dcr;
+ case TIM_DMAR:
+ return s->tim_dmar;
+ case TIM_OR:
+ return s->tim_or;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32F205_timer_write: Bad offset 0x%"HWADDR_PRIx"\n", offset);
+ }
+
+ return 0;
+}
+
+static void stm32f205_timer_write(void *opaque, hwaddr offset,
+ uint64_t val64, unsigned size)
+{
+ STM32f205TimerState *s = opaque;
+ uint32_t value = val64;
+
+ DB_PRINT("Write 0x%x, 0x%"HWADDR_PRIx"\n", value, offset);
+
+ switch (offset) {
+ case TIM_CR1:
+ s->tim_cr1 = value;
+ return;
+ case TIM_CR2:
+ s->tim_cr2 = value;
+ return;
+ case TIM_SMCR:
+ s->tim_smcr = value;
+ return;
+ case TIM_DIER:
+ s->tim_dier = value;
+ return;
+ case TIM_SR:
+ /* This is set by hardware and cleared by software */
+ s->tim_sr &= value;
+ return;
+ case TIM_EGR:
+ s->tim_egr = value;
+ if (s->tim_egr & TIM_EGR_UG) {
+ /* Re-init the counter */
+ stm32f205_timer_reset(DEVICE(s));
+ }
+ return;
+ case TIM_CCMR1:
+ s->tim_ccmr1 = value;
+ return;
+ case TIM_CCMR2:
+ s->tim_ccmr2 = value;
+ return;
+ case TIM_CCER:
+ s->tim_ccer = value;
+ return;
+ case TIM_CNT:
+ s->tim_cnt = value;
+ stm32f205_timer_set_alarm(s);
+ return;
+ case TIM_PSC:
+ s->tim_psc = value;
+ return;
+ case TIM_ARR:
+ s->tim_arr = value;
+ stm32f205_timer_set_alarm(s);
+ return;
+ case TIM_CCR1:
+ s->tim_ccr1 = value;
+ return;
+ case TIM_CCR2:
+ s->tim_ccr2 = value;
+ return;
+ case TIM_CCR3:
+ s->tim_ccr3 = value;
+ return;
+ case TIM_CCR4:
+ s->tim_ccr4 = value;
+ return;
+ case TIM_DCR:
+ s->tim_dcr = value;
+ return;
+ case TIM_DMAR:
+ s->tim_dmar = value;
+ return;
+ case TIM_OR:
+ s->tim_or = value;
+ return;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32F205_timer_write: Bad offset 0x%"HWADDR_PRIx"\n", offset);
+ }
+}
+
+static const MemoryRegionOps stm32f205_timer_ops = {
+ .read = stm32f205_timer_read,
+ .write = stm32f205_timer_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void stm32f205_timer_init(Object *obj)
+{
+ STM32f205TimerState *s = STM32F205TIMER(obj);
+ struct tm tm;
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+ memory_region_init_io(&s->iomem, obj, &stm32f205_timer_ops, s,
+ "stm32f205_timer", 0x2000);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
+
+ qemu_get_timedate(&tm, 0);
+ s->tick_offset = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / get_ticks_per_sec();
+
+ s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, stm32f205_timer_interrupt, s);
+}
+
+static void stm32f205_timer_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = stm32f205_timer_reset;
+}
+
+static const TypeInfo stm32f205_timer_info = {
+ .name = TYPE_STM32F205_TIMER,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(STM32f205TimerState),
+ .instance_init = stm32f205_timer_init,
+ .class_init = stm32f205_timer_class_init,
+};
+
+static void stm32f205_timer_register_types(void)
+{
+ type_register_static(&stm32f205_timer_info);
+}
+
+type_init(stm32f205_timer_register_types)
diff --git a/include/hw/timer/stm32f205_timer.h b/include/hw/timer/stm32f205_timer.h
new file mode 100644
index 0000000..2686066
--- /dev/null
+++ b/include/hw/timer/stm32f205_timer.h
@@ -0,0 +1,101 @@
+/*
+ * STM32F205 Timer
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_STM_TIMER_H
+#define HW_STM_TIMER_H
+
+#include "hw/sysbus.h"
+#include "qemu/timer.h"
+#include "sysemu/sysemu.h"
+
+#define TIM_CR1 0x00
+#define TIM_CR2 0x04
+#define TIM_SMCR 0x08
+#define TIM_DIER 0x0C
+#define TIM_SR 0x10
+#define TIM_EGR 0x14
+#define TIM_CCMR1 0x18
+#define TIM_CCMR2 0x1C
+#define TIM_CCER 0x20
+#define TIM_CNT 0x24
+#define TIM_PSC 0x28
+#define TIM_ARR 0x2C
+#define TIM_CCR1 0x34
+#define TIM_CCR2 0x38
+#define TIM_CCR3 0x3C
+#define TIM_CCR4 0x40
+#define TIM_DCR 0x48
+#define TIM_DMAR 0x4C
+#define TIM_OR 0x50
+
+#define TIM_CR1_CEN 1
+
+#define TIM_EGR_UG 1
+
+#define TIM_CCER_CC2E (1 << 4)
+#define TIM_CCMR1_OC2M2 (1 << 14)
+#define TIM_CCMR1_OC2M1 (1 << 13)
+#define TIM_CCMR1_OC2M0 (1 << 12)
+#define TIM_CCMR1_OC2PE (1 << 11)
+
+#define TIM_DIER_UIE 1
+
+#define TYPE_STM32F205_TIMER "stm32f205-timer"
+#define STM32F205TIMER(obj) OBJECT_CHECK(STM32f205TimerState, \
+ (obj), TYPE_STM32F205_TIMER)
+
+typedef struct STM32f205TimerState {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion iomem;
+ QEMUTimer *timer;
+ qemu_irq irq;
+
+ uint32_t tick_offset_vmstate;
+ uint32_t tick_offset;
+
+ uint32_t tim_cr1;
+ uint32_t tim_cr2;
+ uint32_t tim_smcr;
+ uint32_t tim_dier;
+ uint32_t tim_sr;
+ uint32_t tim_egr;
+ uint32_t tim_ccmr1;
+ uint32_t tim_ccmr2;
+ uint32_t tim_ccer;
+ uint32_t tim_cnt;
+ uint32_t tim_psc;
+ uint32_t tim_arr;
+ uint32_t tim_ccr1;
+ uint32_t tim_ccr2;
+ uint32_t tim_ccr3;
+ uint32_t tim_ccr4;
+ uint32_t tim_dcr;
+ uint32_t tim_dmar;
+ uint32_t tim_or;
+} STM32f205TimerState;
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 2/8] stm32f205_USART: Add the stm32f205 USART Controller
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 3/8] stm32f205_SYSCFG: Add the stm32f205 SYSCFG Alistair Francis
` (5 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch adds the stm32f205 USART controller
(UART also uses the same controller).
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
V2:
- Drop charecters if the device is not enabled
- Thanks to Peter C
Changes from RFC:
- Small changes thanks to Peter C
- USART now implements QEMU blocking functions
- Split the config settings to device level
default-configs/arm-softmmu.mak | 1 +
hw/char/Makefile.objs | 1 +
hw/char/stm32f205_usart.c | 218 ++++++++++++++++++++++++++++++++++++++
include/hw/char/stm32f205_usart.h | 69 ++++++++++++
4 files changed, 289 insertions(+)
create mode 100644 hw/char/stm32f205_usart.c
create mode 100644 include/hw/char/stm32f205_usart.h
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index cf23b24..422dec0 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -79,6 +79,7 @@ CONFIG_REALVIEW=y
CONFIG_ZAURUS=y
CONFIG_ZYNQ=y
CONFIG_STM32F205_TIMER=y
+CONFIG_STM32F205_USART=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
index 317385d..c7b3ce4 100644
--- a/hw/char/Makefile.objs
+++ b/hw/char/Makefile.objs
@@ -15,6 +15,7 @@ obj-$(CONFIG_OMAP) += omap_uart.o
obj-$(CONFIG_SH4) += sh_serial.o
obj-$(CONFIG_PSERIES) += spapr_vty.o
obj-$(CONFIG_DIGIC) += digic-uart.o
+obj-$(CONFIG_STM32F205_USART) += stm32f205_usart.o
common-obj-$(CONFIG_ETRAXFS) += etraxfs_ser.o
common-obj-$(CONFIG_ISA_DEBUG) += debugcon.o
diff --git a/hw/char/stm32f205_usart.c b/hw/char/stm32f205_usart.c
new file mode 100644
index 0000000..39e2d39
--- /dev/null
+++ b/hw/char/stm32f205_usart.c
@@ -0,0 +1,218 @@
+/*
+ * STM32F205 USART
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/char/stm32f205_usart.h"
+
+#ifndef STM_USART_ERR_DEBUG
+#define STM_USART_ERR_DEBUG 0
+#endif
+
+#define DB_PRINT_L(lvl, fmt, args...) do { \
+ if (STM_USART_ERR_DEBUG >= lvl) { \
+ qemu_log("stm32f205_usart: %s:" fmt, __func__, ## args); \
+ } \
+} while (0);
+
+#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args)
+
+static int stm32f205_usart_can_receive(void *opaque)
+{
+ STM32f205UsartState *s = opaque;
+
+ if (!(s->usart_sr & USART_SR_RXNE)) {
+ return 1;
+ }
+
+ return 0;
+}
+
+static void stm32f205_usart_receive(void *opaque, const uint8_t *buf, int size)
+{
+ STM32f205UsartState *s = opaque;
+
+ s->usart_dr = *buf;
+
+ if (!(s->usart_cr1 & USART_CR1_UE && s->usart_cr1 & USART_CR1_RE)) {
+ /* USART not enabled - drop the chars */
+ DB_PRINT("Dropping the chars\n");
+ return;
+ }
+
+ s->usart_sr |= USART_SR_RXNE;
+
+ if (s->usart_cr1 & USART_CR1_RXNEIE) {
+ qemu_set_irq(s->irq, 1);
+ }
+
+ DB_PRINT("Receiving: %c\n", s->usart_dr);
+}
+
+static void stm32f205_usart_reset(DeviceState *dev)
+{
+ STM32f205UsartState *s = STM32F205_USART(dev);
+
+ s->usart_sr = USART_SR_RESET;
+ s->usart_dr = 0x00000000;
+ s->usart_brr = 0x00000000;
+ s->usart_cr1 = 0x00000000;
+ s->usart_cr2 = 0x00000000;
+ s->usart_cr3 = 0x00000000;
+ s->usart_gtpr = 0x00000000;
+}
+
+static uint64_t stm32f205_usart_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ STM32f205UsartState *s = opaque;
+ uint64_t retvalue;
+
+ DB_PRINT("Read 0x%"HWADDR_PRIx"\n", addr);
+
+ switch (addr) {
+ case USART_SR:
+ retvalue = s->usart_sr;
+ s->usart_sr &= ~USART_SR_TC;
+ if (s->chr) {
+ qemu_chr_accept_input(s->chr);
+ }
+ return retvalue;
+ case USART_DR:
+ DB_PRINT("Value: 0x%" PRIx32 ", %c\n", s->usart_dr, (char) s->usart_dr);
+ s->usart_sr |= USART_SR_TXE;
+ s->usart_sr &= ~USART_SR_RXNE;
+ return s->usart_dr & 0x3FF;
+ case USART_BRR:
+ return s->usart_brr;
+ case USART_CR1:
+ return s->usart_cr1;
+ case USART_CR2:
+ return s->usart_cr2;
+ case USART_CR3:
+ return s->usart_cr3;
+ case USART_GTPR:
+ return s->usart_gtpr;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32F205_usart_read: Bad offset " \
+ "0x%"HWADDR_PRIx"\n", addr);
+ return 0;
+ }
+
+ return 0;
+}
+
+static void stm32f205_usart_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ STM32f205UsartState *s = opaque;
+ uint32_t value = val64;
+ unsigned char ch;
+
+ DB_PRINT("Write 0x%" PRIx32 ", 0x%"HWADDR_PRIx"\n", value, addr);
+
+ switch (addr) {
+ case USART_SR:
+ if (value <= 0x3FF) {
+ s->usart_sr = value;
+ } else {
+ s->usart_sr &= value;
+ }
+ return;
+ case USART_DR:
+ if (value < 0xF000) {
+ ch = value;
+ if (s->chr) {
+ qemu_chr_fe_write_all(s->chr, &ch, 1);
+ }
+ s->usart_sr |= USART_SR_TC;
+ s->usart_sr &= ~USART_SR_TXE;
+ }
+ return;
+ case USART_BRR:
+ s->usart_brr = value;
+ return;
+ case USART_CR1:
+ s->usart_cr1 = value;
+ return;
+ case USART_CR2:
+ s->usart_cr2 = value;
+ return;
+ case USART_CR3:
+ s->usart_cr3 = value;
+ return;
+ case USART_GTPR:
+ s->usart_gtpr = value;
+ return;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32F205_usart_write: Bad offset " \
+ "0x%"HWADDR_PRIx"\n", addr);
+ }
+}
+
+static const MemoryRegionOps stm32f205_usart_ops = {
+ .read = stm32f205_usart_read,
+ .write = stm32f205_usart_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void stm32f205_usart_init(Object *obj)
+{
+ STM32f205UsartState *s = STM32F205_USART(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+ memory_region_init_io(&s->mmio, obj, &stm32f205_usart_ops, s,
+ TYPE_STM32F205_USART, 0x2000);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+
+ s->chr = qemu_char_get_next_serial();
+
+ if (s->chr) {
+ qemu_chr_add_handlers(s->chr, stm32f205_usart_can_receive,
+ stm32f205_usart_receive, NULL, s);
+ }
+}
+
+static void stm32f205_usart_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = stm32f205_usart_reset;
+}
+
+static const TypeInfo stm32f205_usart_info = {
+ .name = TYPE_STM32F205_USART,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(STM32f205UsartState),
+ .instance_init = stm32f205_usart_init,
+ .class_init = stm32f205_usart_class_init,
+};
+
+static void stm32f205_usart_register_types(void)
+{
+ type_register_static(&stm32f205_usart_info);
+}
+
+type_init(stm32f205_usart_register_types)
diff --git a/include/hw/char/stm32f205_usart.h b/include/hw/char/stm32f205_usart.h
new file mode 100644
index 0000000..e121bf3
--- /dev/null
+++ b/include/hw/char/stm32f205_usart.h
@@ -0,0 +1,69 @@
+/*
+ * STM32F205 USART
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/sysbus.h"
+#include "sysemu/char.h"
+#include "hw/hw.h"
+
+#define USART_SR 0x00
+#define USART_DR 0x04
+#define USART_BRR 0x08
+#define USART_CR1 0x0C
+#define USART_CR2 0x10
+#define USART_CR3 0x14
+#define USART_GTPR 0x18
+
+#define USART_SR_RESET 0x00C00000
+
+#define USART_SR_TXE (1 << 7)
+#define USART_SR_TC (1 << 6)
+#define USART_SR_RXNE (1 << 5)
+
+#define USART_CR1_UE (1 << 13)
+#define USART_CR1_RXNEIE (1 << 5)
+#define USART_CR1_TE (1 << 3)
+#define USART_CR1_RE (1 << 2)
+
+#define TYPE_STM32F205_USART "stm32f205-usart"
+#define STM32F205_USART(obj) \
+ OBJECT_CHECK(STM32f205UsartState, (obj), TYPE_STM32F205_USART)
+
+typedef struct {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion mmio;
+
+ uint32_t usart_sr;
+ uint32_t usart_dr;
+ uint32_t usart_brr;
+ uint32_t usart_cr1;
+ uint32_t usart_cr2;
+ uint32_t usart_cr3;
+ uint32_t usart_gtpr;
+
+ CharDriverState *chr;
+ qemu_irq irq;
+} STM32f205UsartState;
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 3/8] stm32f205_SYSCFG: Add the stm32f205 SYSCFG
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 2/8] stm32f205_USART: Add the stm32f205 USART Controller Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 4/8] target_arm: Remove memory region init from armv7m_init Alistair Francis
` (4 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch adds the stm32f205 System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).
This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
Changes from RFC:
- Split the config settings to device level
default-configs/arm-softmmu.mak | 1 +
hw/misc/Makefile.objs | 1 +
hw/misc/stm32f205_syscfg.c | 160 +++++++++++++++++++++++++++++++++++++
include/hw/misc/stm32f205_syscfg.h | 61 ++++++++++++++
4 files changed, 223 insertions(+)
create mode 100644 hw/misc/stm32f205_syscfg.c
create mode 100644 include/hw/misc/stm32f205_syscfg.h
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 422dec0..a2ea8f7 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -80,6 +80,7 @@ CONFIG_ZAURUS=y
CONFIG_ZYNQ=y
CONFIG_STM32F205_TIMER=y
CONFIG_STM32F205_USART=y
+CONFIG_STM32F205_SYSCFG=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
diff --git a/hw/misc/Makefile.objs b/hw/misc/Makefile.objs
index 979e532..63f03bd 100644
--- a/hw/misc/Makefile.objs
+++ b/hw/misc/Makefile.objs
@@ -39,5 +39,6 @@ obj-$(CONFIG_OMAP) += omap_sdrc.o
obj-$(CONFIG_OMAP) += omap_tap.o
obj-$(CONFIG_SLAVIO) += slavio_misc.o
obj-$(CONFIG_ZYNQ) += zynq_slcr.o
+obj-$(CONFIG_STM32F205_SYSCFG) += stm32f205_syscfg.o
obj-$(CONFIG_PVPANIC) += pvpanic.o
diff --git a/hw/misc/stm32f205_syscfg.c b/hw/misc/stm32f205_syscfg.c
new file mode 100644
index 0000000..9c0eb07
--- /dev/null
+++ b/hw/misc/stm32f205_syscfg.c
@@ -0,0 +1,160 @@
+/*
+ * STM32F205 SYSCFG
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/misc/stm32f205_syscfg.h"
+
+#ifndef STM_SYSCFG_ERR_DEBUG
+#define STM_SYSCFG_ERR_DEBUG 1
+#endif
+
+#define DB_PRINT_L(lvl, fmt, args...) do { \
+ if (STM_SYSCFG_ERR_DEBUG >= lvl) { \
+ qemu_log("stm32f205_syscfg: %s:" fmt, __func__, ## args); \
+ } \
+} while (0);
+
+#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args)
+
+static void stm32f205_syscfg_reset(DeviceState *dev)
+{
+ STM32f205SyscfgState *s = STM32F205_SYSCFG(dev);
+
+ s->syscfg_memrmp = 0x00000000;
+ s->syscfg_pmc = 0x00000000;
+ s->syscfg_exticr1 = 0x00000000;
+ s->syscfg_exticr2 = 0x00000000;
+ s->syscfg_exticr3 = 0x00000000;
+ s->syscfg_exticr4 = 0x00000000;
+ s->syscfg_cmpcr = 0x00000000;
+}
+
+static uint64_t stm32f205_syscfg_read(void *opaque, hwaddr addr,
+ unsigned int size)
+{
+ STM32f205SyscfgState *s = opaque;
+
+ DB_PRINT("0x%x\n", (uint) addr);
+
+ switch (addr) {
+ case SYSCFG_MEMRMP:
+ return s->syscfg_memrmp;
+ case SYSCFG_PMC:
+ return s->syscfg_pmc;
+ case SYSCFG_EXTICR1:
+ return s->syscfg_exticr1;
+ case SYSCFG_EXTICR2:
+ return s->syscfg_exticr2;
+ case SYSCFG_EXTICR3:
+ return s->syscfg_exticr3;
+ case SYSCFG_EXTICR4:
+ return s->syscfg_exticr4;
+ case SYSCFG_CMPCR:
+ return s->syscfg_cmpcr;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32F205_syscfg_read: Bad offset %x\n", (int)addr);
+ return 0;
+ }
+
+ return 0;
+}
+
+static void stm32f205_syscfg_write(void *opaque, hwaddr addr,
+ uint64_t val64, unsigned int size)
+{
+ STM32f205SyscfgState *s = opaque;
+ uint32_t value = val64;
+
+ DB_PRINT("0x%x, 0x%x\n", value, (uint) addr);
+
+ switch (addr) {
+ case SYSCFG_MEMRMP:
+ qemu_log_mask(LOG_UNIMP,
+ "STM32F205_syscfg_write: Changeing the memory mapping " \
+ "isn't supported in QEMU\n");
+ return;
+ case SYSCFG_PMC:
+ qemu_log_mask(LOG_UNIMP,
+ "STM32F205_syscfg_write: Peripheral mode configuration " \
+ "isn't supported in QEMU\n");
+ return;
+ case SYSCFG_EXTICR1:
+ s->syscfg_exticr1 = (value & 0xFF);
+ return;
+ case SYSCFG_EXTICR2:
+ s->syscfg_exticr2 = (value & 0xFF);
+ return;
+ case SYSCFG_EXTICR3:
+ s->syscfg_exticr3 = (value & 0xFF);
+ return;
+ case SYSCFG_EXTICR4:
+ s->syscfg_exticr4 = (value & 0xFF);
+ return;
+ case SYSCFG_CMPCR:
+ s->syscfg_cmpcr = value;
+ return;
+ default:
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "STM32F205_syscfg_write: Bad offset %x\n", (int)addr);
+ }
+}
+
+static const MemoryRegionOps stm32f205_syscfg_ops = {
+ .read = stm32f205_syscfg_read,
+ .write = stm32f205_syscfg_write,
+ .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void stm32f205_syscfg_init(Object *obj)
+{
+ STM32f205SyscfgState *s = STM32F205_SYSCFG(obj);
+
+ sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
+
+ memory_region_init_io(&s->mmio, obj, &stm32f205_syscfg_ops, s,
+ TYPE_STM32F205_SYSCFG, 0x2000);
+ sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
+}
+
+static void stm32f205_syscfg_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->reset = stm32f205_syscfg_reset;
+}
+
+static const TypeInfo stm32f205_syscfg_info = {
+ .name = TYPE_STM32F205_SYSCFG,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(STM32f205SyscfgState),
+ .instance_init = stm32f205_syscfg_init,
+ .class_init = stm32f205_syscfg_class_init,
+};
+
+static void stm32f205_syscfg_register_types(void)
+{
+ type_register_static(&stm32f205_syscfg_info);
+}
+
+type_init(stm32f205_syscfg_register_types)
diff --git a/include/hw/misc/stm32f205_syscfg.h b/include/hw/misc/stm32f205_syscfg.h
new file mode 100644
index 0000000..9c5556f
--- /dev/null
+++ b/include/hw/misc/stm32f205_syscfg.h
@@ -0,0 +1,61 @@
+/*
+ * STM32F205 SYSCFG
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_STM_SYSCFG_H
+#define HW_STM_SYSCFG_H
+
+#include "hw/sysbus.h"
+#include "hw/hw.h"
+
+#define SYSCFG_MEMRMP 0x00
+#define SYSCFG_PMC 0x04
+#define SYSCFG_EXTICR1 0x08
+#define SYSCFG_EXTICR2 0x0C
+#define SYSCFG_EXTICR3 0x10
+#define SYSCFG_EXTICR4 0x14
+#define SYSCFG_CMPCR 0x20
+
+#define TYPE_STM32F205_SYSCFG "stm32f205-syscfg"
+#define STM32F205_SYSCFG(obj) \
+ OBJECT_CHECK(STM32f205SyscfgState, (obj), TYPE_STM32F205_SYSCFG)
+
+typedef struct {
+ /* <private> */
+ SysBusDevice parent_obj;
+
+ /* <public> */
+ MemoryRegion mmio;
+
+ uint32_t syscfg_memrmp;
+ uint32_t syscfg_pmc;
+ uint32_t syscfg_exticr1;
+ uint32_t syscfg_exticr2;
+ uint32_t syscfg_exticr3;
+ uint32_t syscfg_exticr4;
+ uint32_t syscfg_cmpcr;
+
+ qemu_irq irq;
+} STM32f205SyscfgState;
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 4/8] target_arm: Remove memory region init from armv7m_init
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
` (2 preceding siblings ...)
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 3/8] stm32f205_SYSCFG: Add the stm32f205 SYSCFG Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-22 12:11 ` Peter Crosthwaite
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 5/8] target_arm: Parameterise the irq lines for armv7m_init Alistair Francis
` (3 subsequent siblings)
7 siblings, 1 reply; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch moves the memory region init code from the
armv7m_init function to the stellaris_init function
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
V2:
- Change the memory region names to match the machine
hw/arm/armv7m.c | 15 +--------------
hw/arm/stellaris.c | 23 +++++++++++++++++++----
2 files changed, 20 insertions(+), 18 deletions(-)
diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
index aedef13..5c1f7b3 100644
--- a/hw/arm/armv7m.c
+++ b/hw/arm/armv7m.c
@@ -163,7 +163,7 @@ static void armv7m_reset(void *opaque)
}
/* Init CPU and memory for a v7-M based board.
- flash_size and sram_size are in kb.
+ flash_size and sram_size are in bytes.
Returns the NVIC array. */
qemu_irq *armv7m_init(MemoryRegion *system_memory,
@@ -180,13 +180,8 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
uint64_t lowaddr;
int i;
int big_endian;
- MemoryRegion *sram = g_new(MemoryRegion, 1);
- MemoryRegion *flash = g_new(MemoryRegion, 1);
MemoryRegion *hack = g_new(MemoryRegion, 1);
- flash_size *= 1024;
- sram_size *= 1024;
-
if (cpu_model == NULL) {
cpu_model = "cortex-m3";
}
@@ -209,14 +204,6 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
code_size = ram_size - sram_size;
#endif
- /* Flash programming is done via the SCU, so pretend it is ROM. */
- memory_region_init_ram(flash, NULL, "armv7m.flash", flash_size);
- vmstate_register_ram_global(flash);
- memory_region_set_readonly(flash, true);
- memory_region_add_subregion(system_memory, 0, flash);
- memory_region_init_ram(sram, NULL, "armv7m.sram", sram_size);
- vmstate_register_ram_global(sram);
- memory_region_add_subregion(system_memory, 0x20000000, sram);
armv7m_bitband_init();
nvic = qdev_create(NULL, "armv7m_nvic");
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 64bd4b4..9738722 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -1220,10 +1220,25 @@ static void stellaris_init(const char *kernel_filename, const char *cpu_model,
int i;
int j;
- flash_size = ((board->dc0 & 0xffff) + 1) << 1;
- sram_size = (board->dc0 >> 18) + 1;
- pic = armv7m_init(get_system_memory(),
- flash_size, sram_size, kernel_filename, cpu_model);
+ MemoryRegion *sram = g_new(MemoryRegion, 1);
+ MemoryRegion *flash = g_new(MemoryRegion, 1);
+ MemoryRegion *system_memory = get_system_memory();
+
+ flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024;
+ sram_size = ((board->dc0 >> 18) + 1) * 1024;
+
+ /* Flash programming is done via the SCU, so pretend it is ROM. */
+ memory_region_init_ram(flash, NULL, "stellaris.flash", flash_size);
+ vmstate_register_ram_global(flash);
+ memory_region_set_readonly(flash, true);
+ memory_region_add_subregion(system_memory, 0, flash);
+
+ memory_region_init_ram(sram, NULL, "stellaris.sram", sram_size);
+ vmstate_register_ram_global(sram);
+ memory_region_add_subregion(system_memory, 0x20000000, sram);
+
+ pic = armv7m_init(system_memory, flash_size, sram_size,
+ kernel_filename, cpu_model);
if (board->dc1 & (1 << 16)) {
dev = sysbus_create_varargs(TYPE_STELLARIS_ADC, 0x40038000,
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 5/8] target_arm: Parameterise the irq lines for armv7m_init
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
` (3 preceding siblings ...)
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 4/8] target_arm: Remove memory region init from armv7m_init Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 6/8] target_arm: Change the reset values based on the ELF entry Alistair Francis
` (2 subsequent siblings)
7 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch allows the board to specifiy the number of NVIC interrupt
lines when using armv7m_init.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
hw/arm/armv7m.c | 7 ++++---
hw/arm/stellaris.c | 4 +++-
include/hw/arm/arm.h | 2 +-
3 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
index 5c1f7b3..5e684a0 100644
--- a/hw/arm/armv7m.c
+++ b/hw/arm/armv7m.c
@@ -167,14 +167,14 @@ static void armv7m_reset(void *opaque)
Returns the NVIC array. */
qemu_irq *armv7m_init(MemoryRegion *system_memory,
- int flash_size, int sram_size,
+ int flash_size, int sram_size, int num_irq,
const char *kernel_filename, const char *cpu_model)
{
ARMCPU *cpu;
CPUARMState *env;
DeviceState *nvic;
/* FIXME: make this local state. */
- static qemu_irq pic[64];
+ qemu_irq *pic = g_new(qemu_irq, num_irq);
int image_size;
uint64_t entry;
uint64_t lowaddr;
@@ -207,11 +207,12 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
armv7m_bitband_init();
nvic = qdev_create(NULL, "armv7m_nvic");
+ qdev_prop_set_uint32(nvic, "num-irq", num_irq);
env->nvic = nvic;
qdev_init_nofail(nvic);
sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0,
qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
- for (i = 0; i < 64; i++) {
+ for (i = 0; i < num_irq; i++) {
pic[i] = qdev_get_gpio_in(nvic, i);
}
diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
index 9738722..b7cd753 100644
--- a/hw/arm/stellaris.c
+++ b/hw/arm/stellaris.c
@@ -29,6 +29,8 @@
#define BP_OLED_SSI 0x02
#define BP_GAMEPAD 0x04
+#define NUM_IRQ_LINES 64
+
typedef const struct {
const char *name;
uint32_t did0;
@@ -1238,7 +1240,7 @@ static void stellaris_init(const char *kernel_filename, const char *cpu_model,
memory_region_add_subregion(system_memory, 0x20000000, sram);
pic = armv7m_init(system_memory, flash_size, sram_size,
- kernel_filename, cpu_model);
+ NUM_IRQ_LINES, kernel_filename, cpu_model);
if (board->dc1 & (1 << 16)) {
dev = sysbus_create_varargs(TYPE_STELLARIS_ADC, 0x40038000,
diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h
index cefc9e6..3e7c463 100644
--- a/include/hw/arm/arm.h
+++ b/include/hw/arm/arm.h
@@ -16,7 +16,7 @@
/* armv7m.c */
qemu_irq *armv7m_init(MemoryRegion *system_memory,
- int flash_size, int sram_size,
+ int flash_size, int sram_size, int num_irq,
const char *kernel_filename, const char *cpu_model);
/* arm_boot.c */
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 6/8] target_arm: Change the reset values based on the ELF entry
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
` (4 preceding siblings ...)
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 5/8] target_arm: Parameterise the irq lines for armv7m_init Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 7/8] stm32f205: Add the stm32f205 SoC Alistair Francis
2014-09-19 4:55 ` [Qemu-devel] [Patch v2 8/8] netduino2: Add the Netduino 2 Machine Alistair Francis
7 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
The Netduino 2 machine won't run unless the reset_pc is based
on the ELF entry point.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
---
V2:
- Malloc straight away, thanks to Peter C
hw/arm/armv7m.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
index 5e684a0..14d5c4a 100644
--- a/hw/arm/armv7m.c
+++ b/hw/arm/armv7m.c
@@ -155,11 +155,19 @@ static void armv7m_bitband_init(void)
/* Board init. */
-static void armv7m_reset(void *opaque)
-{
- ARMCPU *cpu = opaque;
+typedef struct ARMV7MResetArgs {
+ ARMCPU *cpu;
+ uint32_t reset_pc;
+} ARMV7MResetArgs;
+
+ static void armv7m_reset(void *opaque)
+ {
+ ARMV7MResetArgs *args = opaque;
+
+ cpu_reset(CPU(args->cpu));
- cpu_reset(CPU(cpu));
+ args->cpu->env.thumb = args->reset_pc & 1;
+ args->cpu->env.regs[15] = args->reset_pc & ~1;
}
/* Init CPU and memory for a v7-M based board.
@@ -181,6 +189,7 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
int i;
int big_endian;
MemoryRegion *hack = g_new(MemoryRegion, 1);
+ ARMV7MResetArgs *reset_args = g_new0(ARMV7MResetArgs, 1);
if (cpu_model == NULL) {
cpu_model = "cortex-m3";
@@ -247,7 +256,11 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
vmstate_register_ram_global(hack);
memory_region_add_subregion(system_memory, 0xfffff000, hack);
- qemu_register_reset(armv7m_reset, cpu);
+ *reset_args = (ARMV7MResetArgs) {
+ .cpu = cpu,
+ .reset_pc = entry,
+ };
+ qemu_register_reset(armv7m_reset, reset_args);
return pic;
}
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 7/8] stm32f205: Add the stm32f205 SoC
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
` (5 preceding siblings ...)
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 6/8] target_arm: Change the reset values based on the ELF entry Alistair Francis
@ 2014-09-19 4:54 ` Alistair Francis
2014-09-19 4:55 ` [Qemu-devel] [Patch v2 8/8] netduino2: Add the Netduino 2 Machine Alistair Francis
7 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:54 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
Changes from RFC:
- Small changes thanks to Peter C
- Split the config settings to device level
default-configs/arm-softmmu.mak | 1 +
hw/arm/Makefile.objs | 1 +
hw/arm/stm32f205_soc.c | 155 ++++++++++++++++++++++++++++++++++++++++
include/hw/arm/stm32f205_soc.h | 69 ++++++++++++++++++
4 files changed, 226 insertions(+)
create mode 100644 hw/arm/stm32f205_soc.c
create mode 100644 include/hw/arm/stm32f205_soc.h
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index a2ea8f7..8068100 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -81,6 +81,7 @@ CONFIG_ZYNQ=y
CONFIG_STM32F205_TIMER=y
CONFIG_STM32F205_USART=y
CONFIG_STM32F205_SYSCFG=y
+CONFIG_STM32F205_SOC=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 6088e53..9769317 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -8,3 +8,4 @@ obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
obj-$(CONFIG_DIGIC) += digic.o
obj-y += omap1.o omap2.o strongarm.o
obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
+obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c
new file mode 100644
index 0000000..3fa0af6
--- /dev/null
+++ b/hw/arm/stm32f205_soc.c
@@ -0,0 +1,155 @@
+/*
+ * STM32F205 SoC
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/arm/stm32f205_soc.h"
+
+/* At the moment only Timer 2 to 5 are modelled */
+static const uint32_t timer_addr[] = { 0x40000000, 0x40000400,
+ 0x40000800, 0x40000C00 };
+static const uint32_t usart_addr[] = { 0x40011000, 0x40004400,
+ 0x40004800, 0x40004C00, 0x40005000, 0x40011400 };
+
+static const int timer_irq[] = {28, 29, 30, 50};
+static const int usart_irq[] = {37, 38, 39, 52, 53, 71, 82, 83};
+
+static void stm32f205_soc_initfn(Object *obj)
+{
+ STM32F205State *s = STM32F205_SOC(obj);
+ int i;
+
+ object_initialize(&s->syscfg, sizeof(s->syscfg), TYPE_STM32F205_SYSCFG);
+ qdev_set_parent_bus(DEVICE(&s->syscfg), sysbus_get_default());
+
+ for (i = 0; i < 5; i++) {
+ object_initialize(&s->usart[i], sizeof(s->usart[i]),
+ TYPE_STM32F205_USART);
+ qdev_set_parent_bus(DEVICE(&s->usart[i]), sysbus_get_default());
+ }
+
+ for (i = 0; i < 4; i++) {
+ object_initialize(&s->timer[i], sizeof(s->timer[i]),
+ TYPE_STM32F205_TIMER);
+ qdev_set_parent_bus(DEVICE(&s->timer[i]), sysbus_get_default());
+ }
+}
+
+static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp)
+{
+ STM32F205State *s = STM32F205_SOC(dev_soc);
+ DeviceState *syscfgdev, *usartdev, *timerdev;
+ SysBusDevice *syscfgbusdev, *usartbusdev, *timerbusdev;
+ qemu_irq *pic;;
+ Error *err = NULL;
+ int i;
+
+ MemoryRegion *system_memory = get_system_memory();
+ MemoryRegion *sram = g_new(MemoryRegion, 1);
+ MemoryRegion *flash = g_new(MemoryRegion, 1);
+ MemoryRegion *flash_alias = g_new(MemoryRegion, 1);
+
+ memory_region_init_ram(flash, NULL, "netduino.flash", FLASH_SIZE);
+ memory_region_init_alias(flash_alias, NULL, "netduino.flash.alias",
+ flash, 0, FLASH_SIZE);
+
+ vmstate_register_ram_global(flash);
+
+ memory_region_set_readonly(flash, true);
+ memory_region_set_readonly(flash_alias, true);
+
+ memory_region_add_subregion(system_memory, FLASH_BASE_ADDRESS, flash);
+ memory_region_add_subregion(system_memory, 0, flash_alias);
+
+ memory_region_init_ram(sram, NULL, "netduino.sram", SRAM_SIZE);
+ vmstate_register_ram_global(sram);
+ memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
+
+ pic = armv7m_init(get_system_memory(),
+ FLASH_SIZE, SRAM_SIZE, 96,
+ s->kernel_filename, s->cpu_model);
+
+ /* System configuration controller */
+ syscfgdev = DEVICE(&s->syscfg);
+ object_property_set_bool(OBJECT(&s->syscfg), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ syscfgbusdev = SYS_BUS_DEVICE(syscfgdev);
+ sysbus_mmio_map(syscfgbusdev, 0, 0x40013800);
+ sysbus_connect_irq(syscfgbusdev, 0, pic[71]);
+
+ /* Attach UART (uses USART registers) and USART controllers */
+ for (i = 0; i < 5; i++) {
+ usartdev = DEVICE(&(s->usart[i]));
+ object_property_set_bool(OBJECT(&s->usart[i]), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ usartbusdev = SYS_BUS_DEVICE(usartdev);
+ sysbus_mmio_map(usartbusdev, 0, usart_addr[i]);
+ sysbus_connect_irq(usartbusdev, 0, pic[usart_irq[i]]);
+ }
+
+ /* Timer 2 to 5 */
+ for (i = 0; i < 4; i++) {
+ timerdev = DEVICE(&(s->timer[i]));
+ object_property_set_bool(OBJECT(&s->timer[i]), true, "realized", &err);
+ if (err != NULL) {
+ error_propagate(errp, err);
+ return;
+ }
+ timerbusdev = SYS_BUS_DEVICE(timerdev);
+ sysbus_mmio_map(timerbusdev, 0, timer_addr[i]);
+ sysbus_connect_irq(timerbusdev, 0, pic[timer_irq[i]]);
+ }
+}
+
+static Property stm32f205_soc_properties[] = {
+ DEFINE_PROP_STRING("kernel-filename", STM32F205State, kernel_filename),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void stm32f205_soc_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->realize = stm32f205_soc_realize;
+ dc->props = stm32f205_soc_properties;
+}
+
+static const TypeInfo stm32f205_soc_info = {
+ .name = TYPE_STM32F205_SOC,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(STM32F205State),
+ .instance_init = stm32f205_soc_initfn,
+ .class_init = stm32f205_soc_class_init,
+};
+
+static void stm32f205_soc_types(void)
+{
+ type_register_static(&stm32f205_soc_info);
+}
+
+type_init(stm32f205_soc_types)
diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h
new file mode 100644
index 0000000..addc555
--- /dev/null
+++ b/include/hw/arm/stm32f205_soc.h
@@ -0,0 +1,69 @@
+/*
+ * STM32F205 SoC
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef HW_ARM_STM32F205SOC_H
+#define HW_ARM_STM32F205SOC_H
+
+#include "hw/sysbus.h"
+#include "hw/arm/arm.h"
+#include "hw/ssi.h"
+#include "hw/devices.h"
+#include "qemu/timer.h"
+#include "net/net.h"
+#include "elf.h"
+#include "hw/loader.h"
+#include "hw/boards.h"
+#include "exec/address-spaces.h"
+#include "qemu/error-report.h"
+#include "sysemu/qtest.h"
+#include "hw/misc/stm32f205_syscfg.h"
+#include "hw/timer/stm32f205_timer.h"
+#include "hw/char/stm32f205_usart.h"
+
+#define TYPE_STM32F205_SOC "stm32f205_soc"
+#define STM32F205_SOC(obj) \
+ OBJECT_CHECK(STM32F205State, (obj), TYPE_STM32F205_SOC)
+
+#define STM_NUM_USARTS 5
+#define STM_NUM_TIMERS 5
+
+#define FLASH_BASE_ADDRESS 0x08000000
+#define FLASH_SIZE (1024 * 1024)
+#define SRAM_BASE_ADDRESS 0x20000000
+#define SRAM_SIZE (128 * 1024)
+
+typedef struct STM32F205State {
+ /*< private >*/
+ SysBusDevice parent_obj;
+ /*< public >*/
+
+ char *kernel_filename;
+ char *cpu_model;
+
+ STM32f205SyscfgState syscfg;
+ STM32f205UsartState usart[STM_NUM_USARTS];
+ STM32f205TimerState timer[STM_NUM_TIMERS];
+} STM32F205State;
+
+#endif
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [Qemu-devel] [Patch v2 8/8] netduino2: Add the Netduino 2 Machine
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
` (6 preceding siblings ...)
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 7/8] stm32f205: Add the stm32f205 SoC Alistair Francis
@ 2014-09-19 4:55 ` Alistair Francis
7 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-19 4:55 UTC (permalink / raw)
To: qemu-devel; +Cc: peter.maydell, peter.crosthwaite, konstanty, martin.galvan
This patch adds the Netduino 2 Machine.
This is a Cortex-M3 based machine. Information can be found at:
http://www.netduino.com/netduino2/specs.htm
Signed-off-by: Alistair Francis <alistair23@gmail.com>
---
Changes from RFC:
- Remove CPU passthrough
hw/arm/Makefile.objs | 1 +
hw/arm/netduino2.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 hw/arm/netduino2.c
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 9769317..2577f68 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -3,6 +3,7 @@ obj-$(CONFIG_DIGIC) += digic_boards.o
obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o
obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
+obj-y += netduino2.o
obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
obj-$(CONFIG_DIGIC) += digic.o
diff --git a/hw/arm/netduino2.c b/hw/arm/netduino2.c
new file mode 100644
index 0000000..305983f
--- /dev/null
+++ b/hw/arm/netduino2.c
@@ -0,0 +1,54 @@
+/*
+ * Netduino 2 Machine Model
+ *
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "hw/arm/stm32f205_soc.h"
+
+static void netduino2_init(MachineState *machine)
+{
+ DeviceState *dev;
+ Error *err = NULL;
+
+ dev = qdev_create(NULL, TYPE_STM32F205_SOC);
+ if (machine->kernel_filename) {
+ qdev_prop_set_string(dev, "kernel-filename", machine->kernel_filename);
+ }
+ object_property_set_bool(OBJECT(dev), true, "realized", &err);
+ if (err != NULL) {
+ error_report("%s", error_get_pretty(err));
+ exit(1);
+ }
+}
+
+static QEMUMachine netduino2_machine = {
+ .name = "netduino2",
+ .desc = "Netduino 2 Machine",
+ .init = netduino2_init,
+};
+
+static void netduino2_machine_init(void)
+{
+ qemu_register_machine(&netduino2_machine);
+}
+
+machine_init(netduino2_machine_init);
--
1.9.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer Alistair Francis
@ 2014-09-22 11:40 ` Peter Crosthwaite
2014-09-25 12:39 ` Alistair Francis
0 siblings, 1 reply; 12+ messages in thread
From: Peter Crosthwaite @ 2014-09-22 11:40 UTC (permalink / raw)
To: Alistair Francis
Cc: Peter Maydell, Martin Galvan, qemu-devel@nongnu.org Developers,
Konstanty Bialkowski
On Fri, Sep 19, 2014 at 2:54 PM, Alistair Francis <alistair23@gmail.com> wrote:
> This patch adds the stm32f205 timers: TIM2, TIM3, TIM4 and TIM5
> to QEMU.
>
> Signed-off-by: Alistair Francis <alistair23@gmail.com>
> ---
> PUBLIC
> V2:
> - Reorder the Makefile config
> - Fix up the debug printing
> - Correct the timer event trigger
> Changes from RFC:
> - Small changes to functionality and style. Thanks to Peter C
> - Rename to make the timer more generic
> - Split the config settings to device level
>
> default-configs/arm-softmmu.mak | 1 +
> hw/timer/Makefile.objs | 2 +
> hw/timer/stm32f205_timer.c | 279 +++++++++++++++++++++++++++++++++++++
> include/hw/timer/stm32f205_timer.h | 101 ++++++++++++++
> 4 files changed, 383 insertions(+)
> create mode 100644 hw/timer/stm32f205_timer.c
> create mode 100644 include/hw/timer/stm32f205_timer.h
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index f3513fa..cf23b24 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -78,6 +78,7 @@ CONFIG_NSERIES=y
> CONFIG_REALVIEW=y
> CONFIG_ZAURUS=y
> CONFIG_ZYNQ=y
> +CONFIG_STM32F205_TIMER=y
>
> CONFIG_VERSATILE_PCI=y
> CONFIG_VERSATILE_I2C=y
> diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
> index 2c86c3d..4bd9617 100644
> --- a/hw/timer/Makefile.objs
> +++ b/hw/timer/Makefile.objs
> @@ -31,3 +31,5 @@ obj-$(CONFIG_DIGIC) += digic-timer.o
> obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
>
> obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o
> +
> +common-obj-$(CONFIG_STM32F205_TIMER) += stm32f205_timer.o
> diff --git a/hw/timer/stm32f205_timer.c b/hw/timer/stm32f205_timer.c
> new file mode 100644
> index 0000000..37f2318
> --- /dev/null
> +++ b/hw/timer/stm32f205_timer.c
> @@ -0,0 +1,279 @@
> +/*
> + * STM32F205 Timer
> + *
> + * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#include "hw/timer/stm32f205_timer.h"
> +
> +#ifndef STM_TIMER_ERR_DEBUG
> +#define STM_TIMER_ERR_DEBUG 0
> +#endif
> +
> +#define DB_PRINT_L(lvl, fmt, args...) do { \
> + if (STM_TIMER_ERR_DEBUG >= lvl) { \
> + qemu_log("stm32f205_timer: %s:" fmt, __func__, ## args); \
> + } \
> +} while (0);
> +
> +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args)
> +
> +static void stm32f205_timer_set_alarm(STM32f205TimerState *s);
> +
> +static void stm32f205_timer_interrupt(void *opaque)
> +{
> + STM32f205TimerState *s = opaque;
> +
> + DB_PRINT("Interrupt\n");
> +
> + if (s->tim_dier & TIM_DIER_UIE && s->tim_cr1 & TIM_CR1_CEN) {
> + s->tim_sr |= 1;
> + qemu_irq_pulse(s->irq);
> + stm32f205_timer_set_alarm(s);
> + }
> +}
> +
> +static void stm32f205_timer_set_alarm(STM32f205TimerState *s)
> +{
> + uint32_t ticks;
> + int64_t now;
> +
> + DB_PRINT("Alarm raised at: 0x%x\n", s->tim_cr1);
"alarm set at". The callback would be the alarm raising.
> +
> + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> + ticks = s->tim_arr - (s->tick_offset + (now * get_ticks_per_sec())) *
> + (s->tim_psc + 1);
Still doesn't add up just yet. You have:
ticks = s->tim_arr - ....
Implying ticks and s->tim_arr must be the same physical quantity which
must be timer ticks. However ...
> +
> + DB_PRINT("Alarm set in %d ticks\n", ticks);
> +
> + if (ticks == 0) {
> + timer_del(s->timer);
> + stm32f205_timer_interrupt(s);
> + } else {
> + timer_mod(s->timer, (now + (int64_t) ticks));
... you add ticks to now with is terms of ns, effectively adding
cycles and ns together. A frequency scaling factor is missing
somewhere.
> + DB_PRINT("Wait Time: %" PRId64 "\n", now + (int64_t) ticks);
> + }
> +}
> +
> +static void stm32f205_timer_reset(DeviceState *dev)
> +{
> + STM32f205TimerState *s = STM32F205TIMER(dev);
> +
> + s->tim_cr1 = 0;
> + s->tim_cr2 = 0;
> + s->tim_smcr = 0;
> + s->tim_dier = 0;
> + s->tim_sr = 0;
> + s->tim_egr = 0;
> + s->tim_ccmr1 = 0;
> + s->tim_ccmr2 = 0;
> + s->tim_ccer = 0;
> + s->tim_cnt = 0;
> + s->tim_psc = 0;
> + s->tim_arr = 0;
> + s->tim_ccr1 = 0;
> + s->tim_ccr2 = 0;
> + s->tim_ccr3 = 0;
> + s->tim_ccr4 = 0;
> + s->tim_dcr = 0;
> + s->tim_dmar = 0;
> + s->tim_or = 0;
> +}
> +
> +static uint64_t stm32f205_timer_read(void *opaque, hwaddr offset,
> + unsigned size)
> +{
> + STM32f205TimerState *s = opaque;
> +
> + DB_PRINT("Read 0x%"HWADDR_PRIx"\n", offset);
> +
> + switch (offset) {
> + case TIM_CR1:
> + return s->tim_cr1;
> + case TIM_CR2:
> + return s->tim_cr2;
> + case TIM_SMCR:
> + return s->tim_smcr;
> + case TIM_DIER:
> + return s->tim_dier;
> + case TIM_SR:
> + return s->tim_sr;
> + case TIM_EGR:
> + return s->tim_egr;
> + case TIM_CCMR1:
> + return s->tim_ccmr1;
> + case TIM_CCMR2:
> + return s->tim_ccmr2;
> + case TIM_CCER:
> + return s->tim_ccer;
> + case TIM_CNT:
> + s->tim_cnt = s->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
> + get_ticks_per_sec());
> + return s->tim_cnt;
> + case TIM_PSC:
> + return s->tim_psc;
> + case TIM_ARR:
> + return s->tim_arr;
> + case TIM_CCR1:
> + return s->tim_ccr1;
> + case TIM_CCR2:
> + return s->tim_ccr2;
> + case TIM_CCR3:
> + return s->tim_ccr3;
> + case TIM_CCR4:
> + return s->tim_ccr4;
> + case TIM_DCR:
> + return s->tim_dcr;
> + case TIM_DMAR:
> + return s->tim_dmar;
> + case TIM_OR:
> + return s->tim_or;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "STM32F205_timer_write: Bad offset 0x%"HWADDR_PRIx"\n", offset);
> + }
> +
> + return 0;
> +}
> +
> +static void stm32f205_timer_write(void *opaque, hwaddr offset,
> + uint64_t val64, unsigned size)
> +{
> + STM32f205TimerState *s = opaque;
> + uint32_t value = val64;
> +
> + DB_PRINT("Write 0x%x, 0x%"HWADDR_PRIx"\n", value, offset);
> +
> + switch (offset) {
> + case TIM_CR1:
> + s->tim_cr1 = value;
> + return;
> + case TIM_CR2:
> + s->tim_cr2 = value;
> + return;
> + case TIM_SMCR:
> + s->tim_smcr = value;
> + return;
> + case TIM_DIER:
> + s->tim_dier = value;
> + return;
> + case TIM_SR:
> + /* This is set by hardware and cleared by software */
> + s->tim_sr &= value;
> + return;
> + case TIM_EGR:
> + s->tim_egr = value;
> + if (s->tim_egr & TIM_EGR_UG) {
> + /* Re-init the counter */
Do you just mean reset? Is this supposed to be a software reset?
> + stm32f205_timer_reset(DEVICE(s));
> + }
> + return;
> + case TIM_CCMR1:
> + s->tim_ccmr1 = value;
> + return;
> + case TIM_CCMR2:
> + s->tim_ccmr2 = value;
> + return;
> + case TIM_CCER:
> + s->tim_ccer = value;
> + return;
> + case TIM_CNT:
> + s->tim_cnt = value;
> + stm32f205_timer_set_alarm(s);
> + return;
> + case TIM_PSC:
> + s->tim_psc = value;
> + return;
> + case TIM_ARR:
> + s->tim_arr = value;
> + stm32f205_timer_set_alarm(s);
> + return;
> + case TIM_CCR1:
> + s->tim_ccr1 = value;
> + return;
> + case TIM_CCR2:
> + s->tim_ccr2 = value;
> + return;
> + case TIM_CCR3:
> + s->tim_ccr3 = value;
> + return;
> + case TIM_CCR4:
> + s->tim_ccr4 = value;
> + return;
> + case TIM_DCR:
> + s->tim_dcr = value;
> + return;
> + case TIM_DMAR:
> + s->tim_dmar = value;
> + return;
> + case TIM_OR:
> + s->tim_or = value;
> + return;
> + default:
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "STM32F205_timer_write: Bad offset 0x%"HWADDR_PRIx"\n", offset);
If you _ seperate words it should match the fn name exactly. You can
use plain english with:
STM32F205 timer write
or symbolic naming with:
stm32f205_timer_write
but my suggestion is the latter implemented with %s __func__.
> + }
> +}
> +
> +static const MemoryRegionOps stm32f205_timer_ops = {
> + .read = stm32f205_timer_read,
> + .write = stm32f205_timer_write,
> + .endianness = DEVICE_NATIVE_ENDIAN,
> +};
> +
> +static void stm32f205_timer_init(Object *obj)
> +{
> + STM32f205TimerState *s = STM32F205TIMER(obj);
> + struct tm tm;
> +
tm is unused. It passes compile testing as it's address is take to a fn arg.
> + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
> +
> + memory_region_init_io(&s->iomem, obj, &stm32f205_timer_ops, s,
> + "stm32f205_timer", 0x2000);
> + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
> +
> + qemu_get_timedate(&tm, 0);
> + s->tick_offset = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / get_ticks_per_sec();
> +
This is the only code that sets tick_offset. What's the exact semantic
you are looking for with tick_offset? The fact that this happens at
init only suggest that tick offset will always be 0 or trivially
small. Did you mean to do this in the reset? I can't see any offset
affecting code in reset and something probably should be there.
> + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, stm32f205_timer_interrupt, s);
> +}
> +
> +static void stm32f205_timer_class_init(ObjectClass *klass, void *data)
> +{
> + DeviceClass *dc = DEVICE_CLASS(klass);
> +
> + dc->reset = stm32f205_timer_reset;
missing VMSD?
> +}
> +
> +static const TypeInfo stm32f205_timer_info = {
> + .name = TYPE_STM32F205_TIMER,
> + .parent = TYPE_SYS_BUS_DEVICE,
> + .instance_size = sizeof(STM32f205TimerState),
> + .instance_init = stm32f205_timer_init,
> + .class_init = stm32f205_timer_class_init,
> +};
> +
> +static void stm32f205_timer_register_types(void)
> +{
> + type_register_static(&stm32f205_timer_info);
> +}
> +
> +type_init(stm32f205_timer_register_types)
> diff --git a/include/hw/timer/stm32f205_timer.h b/include/hw/timer/stm32f205_timer.h
> new file mode 100644
> index 0000000..2686066
> --- /dev/null
> +++ b/include/hw/timer/stm32f205_timer.h
> @@ -0,0 +1,101 @@
> +/*
> + * STM32F205 Timer
> + *
> + * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
> + * THE SOFTWARE.
> + */
> +
> +#ifndef HW_STM_TIMER_H
> +#define HW_STM_TIMER_H
> +
> +#include "hw/sysbus.h"
> +#include "qemu/timer.h"
> +#include "sysemu/sysemu.h"
> +
> +#define TIM_CR1 0x00
> +#define TIM_CR2 0x04
> +#define TIM_SMCR 0x08
> +#define TIM_DIER 0x0C
> +#define TIM_SR 0x10
> +#define TIM_EGR 0x14
> +#define TIM_CCMR1 0x18
> +#define TIM_CCMR2 0x1C
> +#define TIM_CCER 0x20
> +#define TIM_CNT 0x24
> +#define TIM_PSC 0x28
> +#define TIM_ARR 0x2C
> +#define TIM_CCR1 0x34
> +#define TIM_CCR2 0x38
> +#define TIM_CCR3 0x3C
> +#define TIM_CCR4 0x40
> +#define TIM_DCR 0x48
> +#define TIM_DMAR 0x4C
> +#define TIM_OR 0x50
> +
> +#define TIM_CR1_CEN 1
> +
> +#define TIM_EGR_UG 1
> +
> +#define TIM_CCER_CC2E (1 << 4)
> +#define TIM_CCMR1_OC2M2 (1 << 14)
> +#define TIM_CCMR1_OC2M1 (1 << 13)
> +#define TIM_CCMR1_OC2M0 (1 << 12)
> +#define TIM_CCMR1_OC2PE (1 << 11)
> +
> +#define TIM_DIER_UIE 1
> +
> +#define TYPE_STM32F205_TIMER "stm32f205-timer"
> +#define STM32F205TIMER(obj) OBJECT_CHECK(STM32f205TimerState, \
> + (obj), TYPE_STM32F205_TIMER)
> +
> +typedef struct STM32f205TimerState {
> + /* <private> */
> + SysBusDevice parent_obj;
> +
> + /* <public> */
> + MemoryRegion iomem;
> + QEMUTimer *timer;
> + qemu_irq irq;
> +
> + uint32_t tick_offset_vmstate;
copy_paste hangover.
Regards,
Peter
> + uint32_t tick_offset;
> +
> + uint32_t tim_cr1;
> + uint32_t tim_cr2;
> + uint32_t tim_smcr;
> + uint32_t tim_dier;
> + uint32_t tim_sr;
> + uint32_t tim_egr;
> + uint32_t tim_ccmr1;
> + uint32_t tim_ccmr2;
> + uint32_t tim_ccer;
> + uint32_t tim_cnt;
> + uint32_t tim_psc;
> + uint32_t tim_arr;
> + uint32_t tim_ccr1;
> + uint32_t tim_ccr2;
> + uint32_t tim_ccr3;
> + uint32_t tim_ccr4;
> + uint32_t tim_dcr;
> + uint32_t tim_dmar;
> + uint32_t tim_or;
> +} STM32f205TimerState;
> +
> +#endif
> --
> 1.9.1
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] [Patch v2 4/8] target_arm: Remove memory region init from armv7m_init
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 4/8] target_arm: Remove memory region init from armv7m_init Alistair Francis
@ 2014-09-22 12:11 ` Peter Crosthwaite
0 siblings, 0 replies; 12+ messages in thread
From: Peter Crosthwaite @ 2014-09-22 12:11 UTC (permalink / raw)
To: Alistair Francis
Cc: Peter Maydell, Martin Galvan, qemu-devel@nongnu.org Developers,
Konstanty Bialkowski
On Fri, Sep 19, 2014 at 2:54 PM, Alistair Francis <alistair23@gmail.com> wrote:
> This patch moves the memory region init code from the
> armv7m_init function to the stellaris_init function
>
> Signed-off-by: Alistair Francis <alistair23@gmail.com>
> ---
> V2:
> - Change the memory region names to match the machine
>
> hw/arm/armv7m.c | 15 +--------------
> hw/arm/stellaris.c | 23 +++++++++++++++++++----
> 2 files changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
> index aedef13..5c1f7b3 100644
> --- a/hw/arm/armv7m.c
> +++ b/hw/arm/armv7m.c
> @@ -163,7 +163,7 @@ static void armv7m_reset(void *opaque)
> }
>
> /* Init CPU and memory for a v7-M based board.
> - flash_size and sram_size are in kb.
> + flash_size and sram_size are in bytes.
> Returns the NVIC array. */
>
> qemu_irq *armv7m_init(MemoryRegion *system_memory,
> @@ -180,13 +180,8 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
> uint64_t lowaddr;
> int i;
> int big_endian;
> - MemoryRegion *sram = g_new(MemoryRegion, 1);
> - MemoryRegion *flash = g_new(MemoryRegion, 1);
> MemoryRegion *hack = g_new(MemoryRegion, 1);
>
> - flash_size *= 1024;
> - sram_size *= 1024;
> -
> if (cpu_model == NULL) {
> cpu_model = "cortex-m3";
> }
> @@ -209,14 +204,6 @@ qemu_irq *armv7m_init(MemoryRegion *system_memory,
> code_size = ram_size - sram_size;
> #endif
>
> - /* Flash programming is done via the SCU, so pretend it is ROM. */
> - memory_region_init_ram(flash, NULL, "armv7m.flash", flash_size);
> - vmstate_register_ram_global(flash);
> - memory_region_set_readonly(flash, true);
> - memory_region_add_subregion(system_memory, 0, flash);
> - memory_region_init_ram(sram, NULL, "armv7m.sram", sram_size);
> - vmstate_register_ram_global(sram);
> - memory_region_add_subregion(system_memory, 0x20000000, sram);
> armv7m_bitband_init();
>
> nvic = qdev_create(NULL, "armv7m_nvic");
> diff --git a/hw/arm/stellaris.c b/hw/arm/stellaris.c
> index 64bd4b4..9738722 100644
> --- a/hw/arm/stellaris.c
> +++ b/hw/arm/stellaris.c
> @@ -1220,10 +1220,25 @@ static void stellaris_init(const char *kernel_filename, const char *cpu_model,
> int i;
> int j;
>
> - flash_size = ((board->dc0 & 0xffff) + 1) << 1;
> - sram_size = (board->dc0 >> 18) + 1;
> - pic = armv7m_init(get_system_memory(),
> - flash_size, sram_size, kernel_filename, cpu_model);
> + MemoryRegion *sram = g_new(MemoryRegion, 1);
> + MemoryRegion *flash = g_new(MemoryRegion, 1);
> + MemoryRegion *system_memory = get_system_memory();
> +
> + flash_size = (((board->dc0 & 0xffff) + 1) << 1) * 1024;
> + sram_size = ((board->dc0 >> 18) + 1) * 1024;
> +
> + /* Flash programming is done via the SCU, so pretend it is ROM. */
> + memory_region_init_ram(flash, NULL, "stellaris.flash", flash_size);
> + vmstate_register_ram_global(flash);
> + memory_region_set_readonly(flash, true);
> + memory_region_add_subregion(system_memory, 0, flash);
> +
> + memory_region_init_ram(sram, NULL, "stellaris.sram", sram_size);
> + vmstate_register_ram_global(sram);
> + memory_region_add_subregion(system_memory, 0x20000000, sram);
> +
> + pic = armv7m_init(system_memory, flash_size, sram_size,
> + kernel_filename, cpu_model);
So I can see why flash_size is needed by armv7m_init for the sake of
capping the loaded image size. While touching the code you could
change this to a better name "mem_size" or something to indicate that
the arg is now the size of an implementation independent memory region
at 0.
sram_size should be unneeded. There some ancient (pre 2007) #if 0 code
that refs it aside from the stuff you delete but I think we can safely
ignore that (or patch to delete it).
Regards,
Peter
>
> if (board->dc1 & (1 << 16)) {
> dev = sysbus_create_varargs(TYPE_STELLARIS_ADC, 0x40038000,
> --
> 1.9.1
>
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer
2014-09-22 11:40 ` Peter Crosthwaite
@ 2014-09-25 12:39 ` Alistair Francis
0 siblings, 0 replies; 12+ messages in thread
From: Alistair Francis @ 2014-09-25 12:39 UTC (permalink / raw)
To: Peter Crosthwaite
Cc: Peter Maydell, Martin Galvan, qemu-devel@nongnu.org Developers,
Konstanty Bialkowski
On Mon, Sep 22, 2014 at 9:40 PM, Peter Crosthwaite
<peter.crosthwaite@xilinx.com> wrote:
> On Fri, Sep 19, 2014 at 2:54 PM, Alistair Francis <alistair23@gmail.com> wrote:
>> This patch adds the stm32f205 timers: TIM2, TIM3, TIM4 and TIM5
>> to QEMU.
>>
>> Signed-off-by: Alistair Francis <alistair23@gmail.com>
>> ---
>> PUBLIC
>> V2:
>> - Reorder the Makefile config
>> - Fix up the debug printing
>> - Correct the timer event trigger
>> Changes from RFC:
>> - Small changes to functionality and style. Thanks to Peter C
>> - Rename to make the timer more generic
>> - Split the config settings to device level
>>
>> default-configs/arm-softmmu.mak | 1 +
>> hw/timer/Makefile.objs | 2 +
>> hw/timer/stm32f205_timer.c | 279 +++++++++++++++++++++++++++++++++++++
>> include/hw/timer/stm32f205_timer.h | 101 ++++++++++++++
>> 4 files changed, 383 insertions(+)
>> create mode 100644 hw/timer/stm32f205_timer.c
>> create mode 100644 include/hw/timer/stm32f205_timer.h
>>
>> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
>> index f3513fa..cf23b24 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -78,6 +78,7 @@ CONFIG_NSERIES=y
>> CONFIG_REALVIEW=y
>> CONFIG_ZAURUS=y
>> CONFIG_ZYNQ=y
>> +CONFIG_STM32F205_TIMER=y
>>
>> CONFIG_VERSATILE_PCI=y
>> CONFIG_VERSATILE_I2C=y
>> diff --git a/hw/timer/Makefile.objs b/hw/timer/Makefile.objs
>> index 2c86c3d..4bd9617 100644
>> --- a/hw/timer/Makefile.objs
>> +++ b/hw/timer/Makefile.objs
>> @@ -31,3 +31,5 @@ obj-$(CONFIG_DIGIC) += digic-timer.o
>> obj-$(CONFIG_MC146818RTC) += mc146818rtc.o
>>
>> obj-$(CONFIG_ALLWINNER_A10_PIT) += allwinner-a10-pit.o
>> +
>> +common-obj-$(CONFIG_STM32F205_TIMER) += stm32f205_timer.o
>> diff --git a/hw/timer/stm32f205_timer.c b/hw/timer/stm32f205_timer.c
>> new file mode 100644
>> index 0000000..37f2318
>> --- /dev/null
>> +++ b/hw/timer/stm32f205_timer.c
>> @@ -0,0 +1,279 @@
>> +/*
>> + * STM32F205 Timer
>> + *
>> + * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a copy
>> + * of this software and associated documentation files (the "Software"), to deal
>> + * in the Software without restriction, including without limitation the rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#include "hw/timer/stm32f205_timer.h"
>> +
>> +#ifndef STM_TIMER_ERR_DEBUG
>> +#define STM_TIMER_ERR_DEBUG 0
>> +#endif
>> +
>> +#define DB_PRINT_L(lvl, fmt, args...) do { \
>> + if (STM_TIMER_ERR_DEBUG >= lvl) { \
>> + qemu_log("stm32f205_timer: %s:" fmt, __func__, ## args); \
>> + } \
>> +} while (0);
>> +
>> +#define DB_PRINT(fmt, args...) DB_PRINT_L(1, fmt, ## args)
>> +
>> +static void stm32f205_timer_set_alarm(STM32f205TimerState *s);
>> +
>> +static void stm32f205_timer_interrupt(void *opaque)
>> +{
>> + STM32f205TimerState *s = opaque;
>> +
>> + DB_PRINT("Interrupt\n");
>> +
>> + if (s->tim_dier & TIM_DIER_UIE && s->tim_cr1 & TIM_CR1_CEN) {
>> + s->tim_sr |= 1;
>> + qemu_irq_pulse(s->irq);
>> + stm32f205_timer_set_alarm(s);
>> + }
>> +}
>> +
>> +static void stm32f205_timer_set_alarm(STM32f205TimerState *s)
>> +{
>> + uint32_t ticks;
>> + int64_t now;
>> +
>> + DB_PRINT("Alarm raised at: 0x%x\n", s->tim_cr1);
>
> "alarm set at". The callback would be the alarm raising.
>
>> +
>> + now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
>> + ticks = s->tim_arr - (s->tick_offset + (now * get_ticks_per_sec())) *
>> + (s->tim_psc + 1);
>
> Still doesn't add up just yet. You have:
>
> ticks = s->tim_arr - ....
>
> Implying ticks and s->tim_arr must be the same physical quantity which
> must be timer ticks. However ...
>
>> +
>> + DB_PRINT("Alarm set in %d ticks\n", ticks);
>> +
>> + if (ticks == 0) {
>> + timer_del(s->timer);
>> + stm32f205_timer_interrupt(s);
>> + } else {
>> + timer_mod(s->timer, (now + (int64_t) ticks));
>
> ... you add ticks to now with is terms of ns, effectively adding
> cycles and ns together. A frequency scaling factor is missing
> somewhere.
>
Yep, will fix
>> + DB_PRINT("Wait Time: %" PRId64 "\n", now + (int64_t) ticks);
>> + }
>> +}
>> +
>> +static void stm32f205_timer_reset(DeviceState *dev)
>> +{
>> + STM32f205TimerState *s = STM32F205TIMER(dev);
>> +
>> + s->tim_cr1 = 0;
>> + s->tim_cr2 = 0;
>> + s->tim_smcr = 0;
>> + s->tim_dier = 0;
>> + s->tim_sr = 0;
>> + s->tim_egr = 0;
>> + s->tim_ccmr1 = 0;
>> + s->tim_ccmr2 = 0;
>> + s->tim_ccer = 0;
>> + s->tim_cnt = 0;
>> + s->tim_psc = 0;
>> + s->tim_arr = 0;
>> + s->tim_ccr1 = 0;
>> + s->tim_ccr2 = 0;
>> + s->tim_ccr3 = 0;
>> + s->tim_ccr4 = 0;
>> + s->tim_dcr = 0;
>> + s->tim_dmar = 0;
>> + s->tim_or = 0;
>> +}
>> +
>> +static uint64_t stm32f205_timer_read(void *opaque, hwaddr offset,
>> + unsigned size)
>> +{
>> + STM32f205TimerState *s = opaque;
>> +
>> + DB_PRINT("Read 0x%"HWADDR_PRIx"\n", offset);
>> +
>> + switch (offset) {
>> + case TIM_CR1:
>> + return s->tim_cr1;
>> + case TIM_CR2:
>> + return s->tim_cr2;
>> + case TIM_SMCR:
>> + return s->tim_smcr;
>> + case TIM_DIER:
>> + return s->tim_dier;
>> + case TIM_SR:
>> + return s->tim_sr;
>> + case TIM_EGR:
>> + return s->tim_egr;
>> + case TIM_CCMR1:
>> + return s->tim_ccmr1;
>> + case TIM_CCMR2:
>> + return s->tim_ccmr2;
>> + case TIM_CCER:
>> + return s->tim_ccer;
>> + case TIM_CNT:
>> + s->tim_cnt = s->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) /
>> + get_ticks_per_sec());
>> + return s->tim_cnt;
>> + case TIM_PSC:
>> + return s->tim_psc;
>> + case TIM_ARR:
>> + return s->tim_arr;
>> + case TIM_CCR1:
>> + return s->tim_ccr1;
>> + case TIM_CCR2:
>> + return s->tim_ccr2;
>> + case TIM_CCR3:
>> + return s->tim_ccr3;
>> + case TIM_CCR4:
>> + return s->tim_ccr4;
>> + case TIM_DCR:
>> + return s->tim_dcr;
>> + case TIM_DMAR:
>> + return s->tim_dmar;
>> + case TIM_OR:
>> + return s->tim_or;
>> + default:
>> + qemu_log_mask(LOG_GUEST_ERROR,
>> + "STM32F205_timer_write: Bad offset 0x%"HWADDR_PRIx"\n", offset);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void stm32f205_timer_write(void *opaque, hwaddr offset,
>> + uint64_t val64, unsigned size)
>> +{
>> + STM32f205TimerState *s = opaque;
>> + uint32_t value = val64;
>> +
>> + DB_PRINT("Write 0x%x, 0x%"HWADDR_PRIx"\n", value, offset);
>> +
>> + switch (offset) {
>> + case TIM_CR1:
>> + s->tim_cr1 = value;
>> + return;
>> + case TIM_CR2:
>> + s->tim_cr2 = value;
>> + return;
>> + case TIM_SMCR:
>> + s->tim_smcr = value;
>> + return;
>> + case TIM_DIER:
>> + s->tim_dier = value;
>> + return;
>> + case TIM_SR:
>> + /* This is set by hardware and cleared by software */
>> + s->tim_sr &= value;
>> + return;
>> + case TIM_EGR:
>> + s->tim_egr = value;
>> + if (s->tim_egr & TIM_EGR_UG) {
>> + /* Re-init the counter */
>
> Do you just mean reset? Is this supposed to be a software reset?
>
The datasheet says "re-initialize the counter". It's basically a reset
unless the timer is up counting, which isn't supported
>> + stm32f205_timer_reset(DEVICE(s));
>> + }
>> + return;
>> + case TIM_CCMR1:
>> + s->tim_ccmr1 = value;
>> + return;
>> + case TIM_CCMR2:
>> + s->tim_ccmr2 = value;
>> + return;
>> + case TIM_CCER:
>> + s->tim_ccer = value;
>> + return;
>> + case TIM_CNT:
>> + s->tim_cnt = value;
>> + stm32f205_timer_set_alarm(s);
>> + return;
>> + case TIM_PSC:
>> + s->tim_psc = value;
>> + return;
>> + case TIM_ARR:
>> + s->tim_arr = value;
>> + stm32f205_timer_set_alarm(s);
>> + return;
>> + case TIM_CCR1:
>> + s->tim_ccr1 = value;
>> + return;
>> + case TIM_CCR2:
>> + s->tim_ccr2 = value;
>> + return;
>> + case TIM_CCR3:
>> + s->tim_ccr3 = value;
>> + return;
>> + case TIM_CCR4:
>> + s->tim_ccr4 = value;
>> + return;
>> + case TIM_DCR:
>> + s->tim_dcr = value;
>> + return;
>> + case TIM_DMAR:
>> + s->tim_dmar = value;
>> + return;
>> + case TIM_OR:
>> + s->tim_or = value;
>> + return;
>> + default:
>> + qemu_log_mask(LOG_GUEST_ERROR,
>> + "STM32F205_timer_write: Bad offset 0x%"HWADDR_PRIx"\n", offset);
>
> If you _ seperate words it should match the fn name exactly. You can
> use plain english with:
>
> STM32F205 timer write
>
> or symbolic naming with:
>
> stm32f205_timer_write
>
> but my suggestion is the latter implemented with %s __func__.
>
That's a good idea. Will update
>> + }
>> +}
>> +
>> +static const MemoryRegionOps stm32f205_timer_ops = {
>> + .read = stm32f205_timer_read,
>> + .write = stm32f205_timer_write,
>> + .endianness = DEVICE_NATIVE_ENDIAN,
>> +};
>> +
>> +static void stm32f205_timer_init(Object *obj)
>> +{
>> + STM32f205TimerState *s = STM32F205TIMER(obj);
>> + struct tm tm;
>> +
>
> tm is unused. It passes compile testing as it's address is take to a fn arg.
>
>> + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
>> +
>> + memory_region_init_io(&s->iomem, obj, &stm32f205_timer_ops, s,
>> + "stm32f205_timer", 0x2000);
>> + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->iomem);
>> +
>> + qemu_get_timedate(&tm, 0);
>> + s->tick_offset = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / get_ticks_per_sec();
>> +
>
> This is the only code that sets tick_offset. What's the exact semantic
> you are looking for with tick_offset? The fact that this happens at
> init only suggest that tick offset will always be 0 or trivially
> small. Did you mean to do this in the reset? I can't see any offset
> affecting code in reset and something probably should be there.
>
That's a good point, I will add it to the reset
>> + s->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, stm32f205_timer_interrupt, s);
>> +}
>> +
>> +static void stm32f205_timer_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> +
>> + dc->reset = stm32f205_timer_reset;
>
> missing VMSD?
>
Will add
>> +}
>> +
>> +static const TypeInfo stm32f205_timer_info = {
>> + .name = TYPE_STM32F205_TIMER,
>> + .parent = TYPE_SYS_BUS_DEVICE,
>> + .instance_size = sizeof(STM32f205TimerState),
>> + .instance_init = stm32f205_timer_init,
>> + .class_init = stm32f205_timer_class_init,
>> +};
>> +
>> +static void stm32f205_timer_register_types(void)
>> +{
>> + type_register_static(&stm32f205_timer_info);
>> +}
>> +
>> +type_init(stm32f205_timer_register_types)
>> diff --git a/include/hw/timer/stm32f205_timer.h b/include/hw/timer/stm32f205_timer.h
>> new file mode 100644
>> index 0000000..2686066
>> --- /dev/null
>> +++ b/include/hw/timer/stm32f205_timer.h
>> @@ -0,0 +1,101 @@
>> +/*
>> + * STM32F205 Timer
>> + *
>> + * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a copy
>> + * of this software and associated documentation files (the "Software"), to deal
>> + * in the Software without restriction, including without limitation the rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#ifndef HW_STM_TIMER_H
>> +#define HW_STM_TIMER_H
>> +
>> +#include "hw/sysbus.h"
>> +#include "qemu/timer.h"
>> +#include "sysemu/sysemu.h"
>> +
>> +#define TIM_CR1 0x00
>> +#define TIM_CR2 0x04
>> +#define TIM_SMCR 0x08
>> +#define TIM_DIER 0x0C
>> +#define TIM_SR 0x10
>> +#define TIM_EGR 0x14
>> +#define TIM_CCMR1 0x18
>> +#define TIM_CCMR2 0x1C
>> +#define TIM_CCER 0x20
>> +#define TIM_CNT 0x24
>> +#define TIM_PSC 0x28
>> +#define TIM_ARR 0x2C
>> +#define TIM_CCR1 0x34
>> +#define TIM_CCR2 0x38
>> +#define TIM_CCR3 0x3C
>> +#define TIM_CCR4 0x40
>> +#define TIM_DCR 0x48
>> +#define TIM_DMAR 0x4C
>> +#define TIM_OR 0x50
>> +
>> +#define TIM_CR1_CEN 1
>> +
>> +#define TIM_EGR_UG 1
>> +
>> +#define TIM_CCER_CC2E (1 << 4)
>> +#define TIM_CCMR1_OC2M2 (1 << 14)
>> +#define TIM_CCMR1_OC2M1 (1 << 13)
>> +#define TIM_CCMR1_OC2M0 (1 << 12)
>> +#define TIM_CCMR1_OC2PE (1 << 11)
>> +
>> +#define TIM_DIER_UIE 1
>> +
>> +#define TYPE_STM32F205_TIMER "stm32f205-timer"
>> +#define STM32F205TIMER(obj) OBJECT_CHECK(STM32f205TimerState, \
>> + (obj), TYPE_STM32F205_TIMER)
>> +
>> +typedef struct STM32f205TimerState {
>> + /* <private> */
>> + SysBusDevice parent_obj;
>> +
>> + /* <public> */
>> + MemoryRegion iomem;
>> + QEMUTimer *timer;
>> + qemu_irq irq;
>> +
>> + uint32_t tick_offset_vmstate;
>
> copy_paste hangover.
Yeah, will remove
Thanks,
Alistair
>
> Regards,
> Peter
>
>> + uint32_t tick_offset;
>> +
>> + uint32_t tim_cr1;
>> + uint32_t tim_cr2;
>> + uint32_t tim_smcr;
>> + uint32_t tim_dier;
>> + uint32_t tim_sr;
>> + uint32_t tim_egr;
>> + uint32_t tim_ccmr1;
>> + uint32_t tim_ccmr2;
>> + uint32_t tim_ccer;
>> + uint32_t tim_cnt;
>> + uint32_t tim_psc;
>> + uint32_t tim_arr;
>> + uint32_t tim_ccr1;
>> + uint32_t tim_ccr2;
>> + uint32_t tim_ccr3;
>> + uint32_t tim_ccr4;
>> + uint32_t tim_dcr;
>> + uint32_t tim_dmar;
>> + uint32_t tim_or;
>> +} STM32f205TimerState;
>> +
>> +#endif
>> --
>> 1.9.1
>>
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2014-09-25 12:40 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-19 4:54 [Qemu-devel] [Patch v2 0/8] Netduino 2 Machine Model Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 1/8] stm32f205_timer: Add the stm32f205 Timer Alistair Francis
2014-09-22 11:40 ` Peter Crosthwaite
2014-09-25 12:39 ` Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 2/8] stm32f205_USART: Add the stm32f205 USART Controller Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 3/8] stm32f205_SYSCFG: Add the stm32f205 SYSCFG Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 4/8] target_arm: Remove memory region init from armv7m_init Alistair Francis
2014-09-22 12:11 ` Peter Crosthwaite
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 5/8] target_arm: Parameterise the irq lines for armv7m_init Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 6/8] target_arm: Change the reset values based on the ELF entry Alistair Francis
2014-09-19 4:54 ` [Qemu-devel] [Patch v2 7/8] stm32f205: Add the stm32f205 SoC Alistair Francis
2014-09-19 4:55 ` [Qemu-devel] [Patch v2 8/8] netduino2: Add the Netduino 2 Machine Alistair Francis
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.