* [PATCH 01/31] ARM: dts: alt: Fix PFC names for DU
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Jacopo Mondi, Simon Horman
From: Jacopo Mondi <jacopo@jmondi.org>
Update the PFC pin groups and function names of DU interface for
r8a7794 ALT board.
The currently specified pin groups and function names prevented PFC and
DU interfaces from being correctly configured:
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
rcar-du: probe of feb00000.display failed with error -22
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 325d3f972c57..a3e74684289b 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -165,8 +165,8 @@
pinctrl-names = "default";
du_pins: du {
- groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
- function = "du";
+ groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+ function = "du1";
};
scif2_pins: scif2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 01/31] ARM: dts: alt: Fix PFC names for DU
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Jacopo Mondi <jacopo@jmondi.org>
Update the PFC pin groups and function names of DU interface for
r8a7794 ALT board.
The currently specified pin groups and function names prevented PFC and
DU interfaces from being correctly configured:
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
rcar-du: probe of feb00000.display failed with error -22
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794-alt.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 325d3f972c57..a3e74684289b 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -165,8 +165,8 @@
pinctrl-names = "default";
du_pins: du {
- groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0";
- function = "du";
+ groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+ function = "du1";
};
scif2_pins: scif2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 02/31] ARM: dts: r8a7794: Correct hsusb parent clock
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
The parent clock of the HSUSB clock is the HP clock, not the MP clock.
Fixes: c7bab9f929e51761 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 01816ac775a8..7d9f0601d3ca 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1262,7 +1262,7 @@
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&mp_clk>,
+ clocks = <&mp_clk>, <&hp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 02/31] ARM: dts: r8a7794: Correct hsusb parent clock
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
The parent clock of the HSUSB clock is the HP clock, not the MP clock.
Fixes: c7bab9f929e51761 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 01816ac775a8..7d9f0601d3ca 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1262,7 +1262,7 @@
mstp7_clks: mstp7_clks at e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&mp_clk>,
+ clocks = <&mp_clk>, <&hp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 03/31] ARM: dts: r8a7794: Use SYSC "always-on" PM Domain for sound
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up the Audio-DMAC and sound device nodes to the SYSC "always-on" PM
Domain, for a more consistent device-power-area description in DT.
Cfr. commit 0761ff2ad0c581f3 ("ARM: dts: r8a7794: Add SYSC PM Domains").
Fixes: 320d6c5a08a4abd3 ("ARM: dts: r8a7794: add sound support")
Fixes: 298e4ee3d213a076 ("ARM: dts: r8a7794: add Audio-DMAC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7d9f0601d3ca..364b4aa8d1c1 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -319,7 +319,7 @@
"ch12";
clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -1485,7 +1485,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 03/31] ARM: dts: r8a7794: Use SYSC "always-on" PM Domain for sound
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Hook up the Audio-DMAC and sound device nodes to the SYSC "always-on" PM
Domain, for a more consistent device-power-area description in DT.
Cfr. commit 0761ff2ad0c581f3 ("ARM: dts: r8a7794: Add SYSC PM Domains").
Fixes: 320d6c5a08a4abd3 ("ARM: dts: r8a7794: add sound support")
Fixes: 298e4ee3d213a076 ("ARM: dts: r8a7794: add Audio-DMAC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7d9f0601d3ca..364b4aa8d1c1 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -319,7 +319,7 @@
"ch12";
clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>;
clock-names = "fck";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#dma-cells = <1>;
dma-channels = <13>;
};
@@ -1485,7 +1485,7 @@
"mix.0", "mix.1",
"dvc.0", "dvc.1",
"clk_a", "clk_b", "clk_c", "clk_i";
- power-domains = <&cpg_clocks>;
+ power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 04/31] ARM: dts: lager: rename and reindex i2cexio
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Simon Horman, Wolfram Sang
The rename from i2cexio to i2cexio0 is in preparation for adding
i2cexio1 which will use the demuxer for IIC1/I2C1.
The reindexing from i2c8 to i2c10 is to allow space for grouping of
additional GPIO buses to be added by follow-up patches to support demuxing
of other i2c buses.
Also note that fallback to GPIO is not provided by the hardware for IIC0/I2C0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed alias and removed typo in commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 434268262d88..5645444cd21a 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -50,7 +50,7 @@
aliases {
serial0 = &scif0;
serial1 = &scifa1;
- i2c8 = "i2cexio";
+ i2c10 = &i2cexio0;
};
chosen {
@@ -273,11 +273,13 @@
* bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
* instantiate the slave device at runtime according to the documentation.
* You can then communicate with the slave via IIC3.
+ *
+ * IIC0/I2C0 does not appear to support fallback to GPIO.
*/
- i2cexio: i2c-8 {
+ i2cexio0: i2c-10 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
- i2c-bus-name = "i2c-exio";
+ i2c-bus-name = "i2c-exio0";
#address-cells = <1>;
#size-cells = <0>;
};
@@ -596,12 +598,12 @@
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "i2c-exio";
+ pinctrl-names = "i2c-exio0";
};
&iic0 {
pinctrl-0 = <&iic0_pins>;
- pinctrl-names = "i2c-exio";
+ pinctrl-names = "i2c-exio0";
};
&iic1 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 04/31] ARM: dts: lager: rename and reindex i2cexio
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
The rename from i2cexio to i2cexio0 is in preparation for adding
i2cexio1 which will use the demuxer for IIC1/I2C1.
The reindexing from i2c8 to i2c10 is to allow space for grouping of
additional GPIO buses to be added by follow-up patches to support demuxing
of other i2c buses.
Also note that fallback to GPIO is not provided by the hardware for IIC0/I2C0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed alias and removed typo in commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 434268262d88..5645444cd21a 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -50,7 +50,7 @@
aliases {
serial0 = &scif0;
serial1 = &scifa1;
- i2c8 = "i2cexio";
+ i2c10 = &i2cexio0;
};
chosen {
@@ -273,11 +273,13 @@
* bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
* instantiate the slave device at runtime according to the documentation.
* You can then communicate with the slave via IIC3.
+ *
+ * IIC0/I2C0 does not appear to support fallback to GPIO.
*/
- i2cexio: i2c-8 {
+ i2cexio0: i2c-10 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
- i2c-bus-name = "i2c-exio";
+ i2c-bus-name = "i2c-exio0";
#address-cells = <1>;
#size-cells = <0>;
};
@@ -596,12 +598,12 @@
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "i2c-exio";
+ pinctrl-names = "i2c-exio0";
};
&iic0 {
pinctrl-0 = <&iic0_pins>;
- pinctrl-names = "i2c-exio";
+ pinctrl-names = "i2c-exio0";
};
&iic1 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 05/31] ARM: dts: lager: use demuxer for IIC1/I2C1
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Simon Horman, Wolfram Sang
Make it possible to select which I2C1 IP core you want to run on the
EXIO-A connector.
This is based on reference work for the I2C0 core of the lager board
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 39 +++++++++++++++++++++++++++++++++++--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 5645444cd21a..9b9748548702 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -50,7 +50,9 @@
aliases {
serial0 = &scif0;
serial1 = &scifa1;
+ i2c8 = &gpioi2c1;
i2c10 = &i2cexio0;
+ i2c11 = &i2cexio1;
};
chosen {
@@ -265,6 +267,17 @@
clock-frequency = <148500000>;
};
+ gpioi2c1: i2c-8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
+ &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
/*
* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
* We use the I2C demuxer, so the desired IP core can be selected at runtime
@@ -283,6 +296,19 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ /*
+ * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
+ * This is similar to the arangement described for i2cexio0 (above)
+ * with a fallback to GPIO also provided.
+ */
+ i2cexio1: i2c-11 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
+ i2c-bus-name = "i2c-exio1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
&du {
@@ -405,6 +431,11 @@
function = "iic0";
};
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
iic1_pins: iic1 {
groups = "iic1";
function = "iic1";
@@ -606,10 +637,14 @@
pinctrl-names = "i2c-exio0";
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "i2c-exio1";
+};
+
&iic1 {
- status = "okay";
pinctrl-0 = <&iic1_pins>;
- pinctrl-names = "default";
+ pinctrl-names = "i2c-exio1";
};
&iic2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 05/31] ARM: dts: lager: use demuxer for IIC1/I2C1
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
Make it possible to select which I2C1 IP core you want to run on the
EXIO-A connector.
This is based on reference work for the I2C0 core of the lager board
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 39 +++++++++++++++++++++++++++++++++++--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 5645444cd21a..9b9748548702 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -50,7 +50,9 @@
aliases {
serial0 = &scif0;
serial1 = &scifa1;
+ i2c8 = &gpioi2c1;
i2c10 = &i2cexio0;
+ i2c11 = &i2cexio1;
};
chosen {
@@ -265,6 +267,17 @@
clock-frequency = <148500000>;
};
+ gpioi2c1: i2c-8 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */
+ &gpio1 16 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
/*
* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
* We use the I2C demuxer, so the desired IP core can be selected at runtime
@@ -283,6 +296,19 @@
#address-cells = <1>;
#size-cells = <0>;
};
+
+ /*
+ * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA).
+ * This is similar to the arangement described for i2cexio0 (above)
+ * with a fallback to GPIO also provided.
+ */
+ i2cexio1: i2c-11 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>;
+ i2c-bus-name = "i2c-exio1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
&du {
@@ -405,6 +431,11 @@
function = "iic0";
};
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
iic1_pins: iic1 {
groups = "iic1";
function = "iic1";
@@ -606,10 +637,14 @@
pinctrl-names = "i2c-exio0";
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "i2c-exio1";
+};
+
&iic1 {
- status = "okay";
pinctrl-0 = <&iic1_pins>;
- pinctrl-names = "default";
+ pinctrl-names = "i2c-exio1";
};
&iic2 {
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 06/31] ARM: dts: koelsch: use demuxer for I2C1
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Simon Horman, Wolfram Sang
Make it possible to fallback to GPIO for I2C1 on the EXIO-C connector.
This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c457b43deb7d..d5c80e6bff22 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -50,6 +50,8 @@
aliases {
serial0 = &scif0;
serial1 = &scif1;
+ i2c9 = &gpioi2c1;
+ i2c12 = &i2cexio1;
};
chosen {
@@ -298,6 +300,29 @@
#clock-cells = <0>;
clock-frequency = <148500000>;
};
+
+ gpioi2c1: i2c-9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
+ &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ /*
+ * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
+ * A fallback to GPIO is provided.
+ */
+ i2cexio1: i2c-12 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&i2c1>, <&gpioi2c1>;
+ i2c-bus-name = "i2c-exio1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
&du {
@@ -333,6 +358,11 @@
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
i2c2_pins: i2c2 {
groups = "i2c2";
function = "i2c2";
@@ -581,6 +611,11 @@
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "i2c-exio1";
+};
+
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 06/31] ARM: dts: koelsch: use demuxer for I2C1
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
Make it possible to fallback to GPIO for I2C1 on the EXIO-C connector.
This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index c457b43deb7d..d5c80e6bff22 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -50,6 +50,8 @@
aliases {
serial0 = &scif0;
serial1 = &scif1;
+ i2c9 = &gpioi2c1;
+ i2c12 = &i2cexio1;
};
chosen {
@@ -298,6 +300,29 @@
#clock-cells = <0>;
clock-frequency = <148500000>;
};
+
+ gpioi2c1: i2c-9 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
+ &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ /*
+ * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
+ * A fallback to GPIO is provided.
+ */
+ i2cexio1: i2c-12 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&i2c1>, <&gpioi2c1>;
+ i2c-bus-name = "i2c-exio1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
&du {
@@ -333,6 +358,11 @@
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
i2c2_pins: i2c2 {
groups = "i2c2";
function = "i2c2";
@@ -581,6 +611,11 @@
};
};
+&i2c1 {
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "i2c-exio1";
+};
+
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 07/31] ARM: dts: alt: use demuxer for I2C4
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Simon Horman, Wolfram Sang
Make it possible to fallback to GPIO for I2C4 on the EXIO-B connector.
This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7794-alt.dts | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index a3e74684289b..7270d4224b1a 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -18,6 +18,8 @@
aliases {
serial0 = &scif2;
+ i2c10 = &gpioi2c4;
+ i2c12 = &i2cexio4;
};
chosen {
@@ -135,6 +137,29 @@
#clock-cells = <0>;
clock-frequency = <148500000>;
};
+
+ gpioi2c4: i2c-10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */
+ &gpio4 8 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ /*
+ * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
+ * A fallback to GPIO is provided.
+ */
+ i2cexio4: i2c-14 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&i2c4>, <&gpioi2c4>;
+ i2c-bus-name = "i2c-exio4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
&du {
@@ -194,6 +219,11 @@
function = "i2c1";
};
+ i2c4_pins: i2c4 {
+ groups = "i2c4";
+ function = "i2c4";
+ };
+
vin0_pins: vin0 {
groups = "vin0_data8", "vin0_clk";
function = "vin0";
@@ -314,6 +344,11 @@
};
};
+&i2c4 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "i2c-exio4";
+};
+
&vin0 {
status = "okay";
pinctrl-0 = <&vin0_pins>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 07/31] ARM: dts: alt: use demuxer for I2C4
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
Make it possible to fallback to GPIO for I2C4 on the EXIO-B connector.
This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7794-alt.dts | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index a3e74684289b..7270d4224b1a 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -18,6 +18,8 @@
aliases {
serial0 = &scif2;
+ i2c10 = &gpioi2c4;
+ i2c12 = &i2cexio4;
};
chosen {
@@ -135,6 +137,29 @@
#clock-cells = <0>;
clock-frequency = <148500000>;
};
+
+ gpioi2c4: i2c-10 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ status = "disabled";
+ gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */
+ &gpio4 8 GPIO_ACTIVE_HIGH /* scl */
+ >;
+ i2c-gpio,delay-us = <5>;
+ };
+
+ /*
+ * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
+ * A fallback to GPIO is provided.
+ */
+ i2cexio4: i2c-14 {
+ compatible = "i2c-demux-pinctrl";
+ i2c-parent = <&i2c4>, <&gpioi2c4>;
+ i2c-bus-name = "i2c-exio4";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
&du {
@@ -194,6 +219,11 @@
function = "i2c1";
};
+ i2c4_pins: i2c4 {
+ groups = "i2c4";
+ function = "i2c4";
+ };
+
vin0_pins: vin0 {
groups = "vin0_data8", "vin0_clk";
function = "vin0";
@@ -314,6 +344,11 @@
};
};
+&i2c4 {
+ pinctrl-0 = <&i2c4_pins>;
+ pinctrl-names = "i2c-exio4";
+};
+
&vin0 {
status = "okay";
pinctrl-0 = <&vin0_pins>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 08/31] ARM: dts: lager: Enable UHS-I SDR-104
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
Add the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 9b9748548702..bd512c86e852 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -608,6 +608,7 @@
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 08/31] ARM: dts: lager: Enable UHS-I SDR-104
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
Add the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7790-lager.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 9b9748548702..bd512c86e852 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -608,6 +608,7 @@
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 09/31] ARM: dts: koelsch: Enable UHS-I SDR-104
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d5c80e6bff22..5405d337d744 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -529,6 +529,7 @@
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 09/31] ARM: dts: koelsch: Enable UHS-I SDR-104
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index d5c80e6bff22..5405d337d744 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -529,6 +529,7 @@
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 10/31] ARM: dts: alt: Enable UHS-I SDR-104
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc; +Cc: linux-arm-kernel, Magnus Damm, Simon Horman
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7794-alt.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 7270d4224b1a..569e3f0e97a5 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -307,6 +307,7 @@
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 10/31] ARM: dts: alt: Enable UHS-I SDR-104
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
arch/arm/boot/dts/r8a7794-alt.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 7270d4224b1a..569e3f0e97a5 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -307,6 +307,7 @@
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 11/31] ARM: dts: r8a7743: initial SoC device tree
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
The initial R8A7743 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743.dtsi
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
new file mode 100644
index 000000000000..db9cb41be79b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -0,0 +1,120 @@
+/*
+ * Device Tree Source for the r8a7743 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+#include <dt-bindings/power/r8a7743-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7743";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+ power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+ next-level-cache = <&L2_CA15>;
+ };
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7743_PD_CA15_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7743-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7743-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a7743-rst";
+ reg = <0 0xe6160000 0 0x100>;
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 11/31] ARM: dts: r8a7743: initial SoC device tree
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
The initial R8A7743 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743.dtsi
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
new file mode 100644
index 000000000000..db9cb41be79b
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -0,0 +1,120 @@
+/*
+ * Device Tree Source for the r8a7743 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7743-cpg-mssr.h>
+#include <dt-bindings/power/r8a7743-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7743";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1500000000>;
+ clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+ power-domains = <&sysc R8A7743_PD_CA15_CPU0>;
+ next-level-cache = <&L2_CA15>;
+ };
+
+ L2_CA15: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7743_PD_CA15_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller at f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpg: clock-controller at e6150000 {
+ compatible = "renesas,r8a7743-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7743-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
+ rst: reset-controller at e6160000 {
+ compatible = "renesas,r8a7743-rst";
+ reg = <0 0xe6160000 0 0x100>;
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 12/31] ARM: dts: r8a7743: add SYS-DMAC support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe SYS-DMAC0/1 in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 64 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index db9cb41be79b..4807b08a3541 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -93,6 +93,70 @@
compatible = "renesas,r8a7743-rst";
reg = <0 0xe6160000 0 0x100>;
};
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7743",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7743",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 12/31] ARM: dts: r8a7743: add SYS-DMAC support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe SYS-DMAC0/1 in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 64 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index db9cb41be79b..4807b08a3541 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -93,6 +93,70 @@
compatible = "renesas,r8a7743-rst";
reg = <0 0xe6160000 0 0x100>;
};
+
+ dmac0: dma-controller at e6700000 {
+ compatible = "renesas,dmac-r8a7743",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller at e6720000 {
+ compatible = "renesas,dmac-r8a7743",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 13/31] ARM: dts: r8a7743: add [H]SCIF{A|B} support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe [H]SCIF{|A|B} ports in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 261 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 261 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 4807b08a3541..874bcf2b4da6 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -157,6 +157,267 @@
#dma-cells = <1>;
dma-channels = <15>;
};
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c60000 0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c70000 0 0x40>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1106>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c78000 0 0x40>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1107>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c80000 0 0x40>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1108>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7743",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7743",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7743",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e58000 0 0x40>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 719>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ea8000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 718>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee0000 0 0x40>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee8000 0 0x40>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7743",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7743",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7743",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 13/31] ARM: dts: r8a7743: add [H]SCIF{A|B} support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe [H]SCIF{|A|B} ports in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 261 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 261 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 4807b08a3541..874bcf2b4da6 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -157,6 +157,267 @@
#dma-cells = <1>;
dma-channels = <15>;
};
+
+ scifa0: serial at e6c40000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa1: serial at e6c50000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa2: serial at e6c60000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c60000 0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa3: serial at e6c70000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c70000 0 0x40>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1106>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa4: serial at e6c78000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c78000 0 0x40>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1107>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa5: serial at e6c80000 {
+ compatible = "renesas,scifa-r8a7743",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c80000 0 0x40>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1108>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb0: serial at e6c20000 {
+ compatible = "renesas,scifb-r8a7743",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb1: serial at e6c30000 {
+ compatible = "renesas,scifb-r8a7743",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb2: serial at e6ce0000 {
+ compatible = "renesas,scifb-r8a7743",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif0: serial at e6e60000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif1: serial at e6e68000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif2: serial at e6e58000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e58000 0 0x40>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 719>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif3: serial at e6ea8000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ea8000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 718>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif4: serial at e6ee0000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee0000 0 0x40>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif5: serial at e6ee8000 {
+ compatible = "renesas,scif-r8a7743",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee8000 0 0x40>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif0: serial at e62c0000 {
+ compatible = "renesas,hscif-r8a7743",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif1: serial at e62c8000 {
+ compatible = "renesas,hscif-r8a7743",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif2: serial at e62d0000 {
+ compatible = "renesas,hscif-r8a7743",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 14/31] ARM: dts: r8a7743: add Ether support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A7743 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 874bcf2b4da6..87563a5379b5 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -418,6 +418,18 @@
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ ether: ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7743";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 813>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 14/31] ARM: dts: r8a7743: add Ether support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A7743 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 874bcf2b4da6..87563a5379b5 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -418,6 +418,18 @@
power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ ether: ethernet at ee700000 {
+ compatible = "renesas,ether-r8a7743";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 813>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 15/31] ARM: dts: r8a7743: add IRQC support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe the IRQC interrupt controller in the R8A7743 device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 87563a5379b5..216cb1f37f87 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -62,6 +62,25 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ irqc: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7743", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 15/31] ARM: dts: r8a7743: add IRQC support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe the IRQC interrupt controller in the R8A7743 device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 87563a5379b5..216cb1f37f87 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -62,6 +62,25 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ irqc: interrupt-controller at e61c0000 {
+ compatible = "renesas,irqc-r8a7743", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 16/31] ARM: dts: sk-rzg1m: initial device tree
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the initial device tree for the R8A7743 SoC based SK-RZG1M board.
The board has one debug serial port (SCIF0); include support for it, so
that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 44 ++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd2619902..f83ea57c97f9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -677,6 +677,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r7s72100-rskrza1.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7743-sk-rzg1m.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
new file mode 100644
index 000000000000..ed26961c9434
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for the SK-RZG1M board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743.dtsi"
+
+/ {
+ model = "SK-RZG1M";
+ compatible = "renesas,sk-rzg1m", "renesas,r8a7743";
+
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ memory@200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&scif0 {
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 16/31] ARM: dts: sk-rzg1m: initial device tree
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the initial device tree for the R8A7743 SoC based SK-RZG1M board.
The board has one debug serial port (SCIF0); include support for it, so
that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 44 ++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd2619902..f83ea57c97f9 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -677,6 +677,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r7s72100-rskrza1.dtb \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7743-sk-rzg1m.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
new file mode 100644
index 000000000000..ed26961c9434
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for the SK-RZG1M board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7743.dtsi"
+
+/ {
+ model = "SK-RZG1M";
+ compatible = "renesas,sk-rzg1m", "renesas,r8a7743";
+
+ aliases {
+ serial0 = &scif0;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ memory at 200000000 {
+ device_type = "memory";
+ reg = <2 0x00000000 0 0x40000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&scif0 {
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 17/31] ARM: dts: sk-rzg1m: add Ether support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the SK-RZG1M board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index ed26961c9434..3a22538208f2 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -42,3 +42,16 @@
&scif0 {
status = "okay";
};
+
+ðer {
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 17/31] ARM: dts: sk-rzg1m: add Ether support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the SK-RZG1M board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
index ed26961c9434..3a22538208f2 100644
--- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
+++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -42,3 +42,16 @@
&scif0 {
status = "okay";
};
+
+ðer {
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ interrupt-parent = <&irqc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 18/31] ARM: dts: r8a7745: initial SoC device tree
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
The initial R8A7745 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7745.dtsi
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
new file mode 100644
index 000000000000..fbf72ddd82b7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -0,0 +1,120 @@
+/*
+ * Device Tree Source for the r8a7745 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7745";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+ power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+ next-level-cache = <&L2_CA7>;
+ };
+
+ L2_CA7: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7745_PD_CA7_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a7745-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7745-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a7745-rst";
+ reg = <0 0xe6160000 0 0x100>;
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 18/31] ARM: dts: r8a7745: initial SoC device tree
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
The initial R8A7745 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 120 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7745.dtsi
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
new file mode 100644
index 000000000000..fbf72ddd82b7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -0,0 +1,120 @@
+/*
+ * Device Tree Source for the r8a7745 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a7745-cpg-mssr.h>
+#include <dt-bindings/power/r8a7745-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7745";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>;
+ power-domains = <&sysc R8A7745_PD_CA7_CPU0>;
+ next-level-cache = <&L2_CA7>;
+ };
+
+ L2_CA7: cache-controller at 0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7745_PD_CA7_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller at f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ cpg: clock-controller at e6150000 {
+ compatible = "renesas,r8a7745-cpg-mssr";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>, <&usb_extal_clk>;
+ clock-names = "extal", "usb_extal";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ };
+
+ sysc: system-controller at e6180000 {
+ compatible = "renesas,r8a7745-sysc";
+ reg = <0 0xe6180000 0 0x200>;
+ #power-domain-cells = <1>;
+ };
+
+ rst: reset-controller at e6160000 {
+ compatible = "renesas,r8a7745-rst";
+ reg = <0 0xe6160000 0 0x100>;
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External USB clock - can be overridden by the board */
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 19/31] ARM: dts: r8a7745: add SYS-DMAC support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe SYS-DMAC0/1 in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 64 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index fbf72ddd82b7..437c5ad933d1 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -93,6 +93,70 @@
compatible = "renesas,r8a7745-rst";
reg = <0 0xe6160000 0 0x100>;
};
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7745",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7745",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 19/31] ARM: dts: r8a7745: add SYS-DMAC support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe SYS-DMAC0/1 in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 64 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index fbf72ddd82b7..437c5ad933d1 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -93,6 +93,70 @@
compatible = "renesas,r8a7745-rst";
reg = <0 0xe6160000 0 0x100>;
};
+
+ dmac0: dma-controller at e6700000 {
+ compatible = "renesas,dmac-r8a7745",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller at e6720000 {
+ compatible = "renesas,dmac-r8a7745",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 20/31] ARM: dts: r8a7745: add [H]SCIF{|A|B} support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe [H]SCIF{|A|B} ports in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 261 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 261 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 437c5ad933d1..99ccdd0d3014 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -157,6 +157,267 @@
#dma-cells = <1>;
dma-channels = <15>;
};
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa1: serial@e6c50000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa2: serial@e6c60000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c60000 0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa3: serial@e6c70000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c70000 0 0x40>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1106>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa4: serial@e6c78000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c78000 0 0x40>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1107>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa5: serial@e6c80000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c80000 0 0x40>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1108>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a7745",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7745",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb2: serial@e6ce0000 {
+ compatible = "renesas,scifb-r8a7745",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e58000 0 0x40>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 719>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ea8000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 718>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6ee0000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee0000 0 0x40>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6ee8000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee8000 0 0x40>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7745",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7745",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e62d0000 {
+ compatible = "renesas,hscif-r8a7745",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 20/31] ARM: dts: r8a7745: add [H]SCIF{|A|B} support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe [H]SCIF{|A|B} ports in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 261 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 261 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 437c5ad933d1..99ccdd0d3014 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -157,6 +157,267 @@
#dma-cells = <1>;
dma-channels = <15>;
};
+
+ scifa0: serial at e6c40000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa1: serial at e6c50000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa2: serial at e6c60000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c60000 0 0x40>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa3: serial at e6c70000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c70000 0 0x40>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1106>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa4: serial at e6c78000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c78000 0 0x40>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1107>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifa5: serial at e6c80000 {
+ compatible = "renesas,scifa-r8a7745",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
+ reg = <0 0xe6c80000 0 0x40>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1108>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb0: serial at e6c20000 {
+ compatible = "renesas,scifb-r8a7745",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb1: serial at e6c30000 {
+ compatible = "renesas,scifb-r8a7745",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scifb2: serial at e6ce0000 {
+ compatible = "renesas,scifb-r8a7745",
+ "renesas,rcar-gen2-scifb", "renesas,scifb";
+ reg = <0 0xe6ce0000 0 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 216>;
+ clock-names = "fck";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif0: serial at e6e60000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif1: serial at e6e68000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 720>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif2: serial at e6e58000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e58000 0 0x40>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 719>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif3: serial at e6ea8000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ea8000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 718>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif4: serial at e6ee0000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee0000 0 0x40>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif5: serial at e6ee8000 {
+ compatible = "renesas,scif-r8a7745",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ee8000 0 0x40>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 714>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif0: serial at e62c0000 {
+ compatible = "renesas,hscif-r8a7745",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 717>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif1: serial at e62c8000 {
+ compatible = "renesas,hscif-r8a7745",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif2: serial at e62d0000 {
+ compatible = "renesas,hscif-r8a7745",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62d0000 0 0x60>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 713>,
+ <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 21/31] ARM: dts: r8a7745: add Ether support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A7745 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 99ccdd0d3014..6fe48157f906 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -418,6 +418,18 @@
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ ether: ethernet@ee700000 {
+ compatible = "renesas,ether-r8a7745";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 813>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 21/31] ARM: dts: r8a7745: add Ether support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the generic R8A7745 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 99ccdd0d3014..6fe48157f906 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -418,6 +418,18 @@
power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
status = "disabled";
};
+
+ ether: ethernet at ee700000 {
+ compatible = "renesas,ether-r8a7745";
+ reg = <0 0xee700000 0 0x400>;
+ interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 813>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ phy-mode = "rmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
/* External root clock */
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 22/31] ARM: dts: r8a7745: add IRQC support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe the IRQC interrupt controller in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 6fe48157f906..0b2e2f37150f 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -62,6 +62,25 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ irqc: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7745", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 22/31] ARM: dts: r8a7745: add IRQC support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Describe the IRQC interrupt controller in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 6fe48157f906..0b2e2f37150f 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -62,6 +62,25 @@
IRQ_TYPE_LEVEL_HIGH)>;
};
+ irqc: interrupt-controller at e61c0000 {
+ compatible = "renesas,irqc-r8a7745", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 23/31] ARM: dts: sk-rzg1e: initial device tree
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the initial device tree for the R8A7745 SoC based SK-RZG1E board.
The board has 1 debug serial port (SCIF2); include support for it,
so that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 39 ++++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f83ea57c97f9..6f8cd1436ee8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -678,6 +678,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7743-sk-rzg1m.dtb \
+ r8a7745-sk-rzg1e.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
new file mode 100644
index 000000000000..667ec4b259d5
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -0,0 +1,39 @@
+/*
+ * Device Tree Source for the SK-RZG1E board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7745.dtsi"
+
+/ {
+ model = "SK-RZG1E";
+ compatible = "renesas,sk-rzg1e", "renesas,r8a7745";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&scif2 {
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 23/31] ARM: dts: sk-rzg1e: initial device tree
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Add the initial device tree for the R8A7745 SoC based SK-RZG1E board.
The board has 1 debug serial port (SCIF2); include support for it,
so that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 39 ++++++++++++++++++++++++++++++++++
2 files changed, 40 insertions(+)
create mode 100644 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f83ea57c97f9..6f8cd1436ee8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -678,6 +678,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7743-sk-rzg1m.dtb \
+ r8a7745-sk-rzg1e.dtb \
r8a7778-bockw.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
new file mode 100644
index 000000000000..667ec4b259d5
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -0,0 +1,39 @@
+/*
+ * Device Tree Source for the SK-RZG1E board
+ *
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7745.dtsi"
+
+/ {
+ model = "SK-RZG1E";
+ compatible = "renesas,sk-rzg1e", "renesas,r8a7745";
+
+ aliases {
+ serial0 = &scif2;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&scif2 {
+ status = "okay";
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 24/31] ARM: dts: sk-rzg1e: add Ether support
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Sergei Shtylyov, Simon Horman
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the SK-RZG1E board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index 667ec4b259d5..97840b340197 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -37,3 +37,16 @@
&scif2 {
status = "okay";
};
+
+ðer {
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ interrupt-parent = <&irqc>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 24/31] ARM: dts: sk-rzg1e: add Ether support
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Define the SK-RZG1E board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
index 667ec4b259d5..97840b340197 100644
--- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
+++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
@@ -20,7 +20,7 @@
};
chosen {
- bootargs = "ignore_loglevel";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
@@ -37,3 +37,16 @@
&scif2 {
status = "okay";
};
+
+ðer {
+ phy-handle = <&phy1>;
+ renesas,ether-link-active-low;
+ status = "okay";
+
+ phy1: ethernet-phy at 1 {
+ reg = <1>;
+ interrupt-parent = <&irqc>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <1>;
+ };
+};
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 25/31] ARM: dts: r8a73a4: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index ca8672778fe0..53183ffe04c1 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -751,6 +751,11 @@
};
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 25/31] ARM: dts: r8a73a4: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a73a4.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index ca8672778fe0..53183ffe04c1 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -751,6 +751,11 @@
};
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile";
reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 26/31] ARM: dts: r8a7779: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 3005308a1807..9d3bb74bd3f6 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -590,6 +590,11 @@
};
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0xff000044 4>;
+ };
+
sysc: system-controller@ffd85000 {
compatible = "renesas,r8a7779-sysc";
reg = <0xffd85000 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 26/31] ARM: dts: r8a7779: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7779.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 3005308a1807..9d3bb74bd3f6 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -590,6 +590,11 @@
};
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0xff000044 4>;
+ };
+
sysc: system-controller at ffd85000 {
compatible = "renesas,r8a7779-sysc";
reg = <0xffd85000 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 27/31] ARM: dts: r8a7790: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a946474be9cf..f554ef3c8096 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1471,6 +1471,11 @@
};
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7790-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 27/31] ARM: dts: r8a7790: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7790.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index a946474be9cf..f554ef3c8096 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1471,6 +1471,11 @@
};
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7790-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 28/31] ARM: dts: r8a7791: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 091d7fb6ee7d..4c50de2faef1 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1485,6 +1485,11 @@
};
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7791-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: arm
Cc: linux-renesas-soc, Olof Johansson, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm, Simon Horman
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
This pull request is based on a merge of:
* The previous round of such requests, tagged as renesas-dt-for-v4.10,
which I have already sent a pull-request for.
* The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
* The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
request for. This is included to provide dependencies for adding device
nodes for PRR, and adding the r8a7743 and r8a7745 SoCs..
The following changes since commit 71eaf88fb7784932956a998968f609c9a89cd739:
Merge branch 'rzg-clock-defs' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into dt-for-v4.10 (2016-11-17 14:58:57 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.10
for you to fetch changes up to cb74f5808db5105baaf127c51660bbb1a10313c4:
ARM: dts: r8a7794: Add device node for PRR (2016-11-17 15:07:49 +0100)
----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v4.10
Enhancements:
* Add device nodes for PRR
* Add r8a7745 SoC and sk-rzg1e board
* Add r8a7743 SoC and sk-rzg1m board
* Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards
Corrections:
* Use SYSC "always-on" PM Domain for sound on r8a7794 SoC
* Correct hsusb parent clock on r8a7794 SoC
* Correct PFC names for DU on alt board
----------------------------------------------------------------
Geert Uytterhoeven (9):
ARM: dts: r8a7794: Correct hsusb parent clock
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain for sound
ARM: dts: r8a73a4: Add device node for PRR
ARM: dts: r8a7779: Add device node for PRR
ARM: dts: r8a7790: Add device node for PRR
ARM: dts: r8a7791: Add device node for PRR
ARM: dts: r8a7792: Add device node for PRR
ARM: dts: r8a7793: Add device node for PRR
ARM: dts: r8a7794: Add device node for PRR
Jacopo Mondi (1):
ARM: dts: alt: Fix PFC names for DU
Sergei Shtylyov (14):
ARM: dts: r8a7743: initial SoC device tree
ARM: dts: r8a7743: add SYS-DMAC support
ARM: dts: r8a7743: add [H]SCIF{A|B} support
ARM: dts: r8a7743: add Ether support
ARM: dts: r8a7743: add IRQC support
ARM: dts: sk-rzg1m: initial device tree
ARM: dts: sk-rzg1m: add Ether support
ARM: dts: r8a7745: initial SoC device tree
ARM: dts: r8a7745: add SYS-DMAC support
ARM: dts: r8a7745: add [H]SCIF{|A|B} support
ARM: dts: r8a7745: add Ether support
ARM: dts: r8a7745: add IRQC support
ARM: dts: sk-rzg1e: initial device tree
ARM: dts: sk-rzg1e: add Ether support
Simon Horman (7):
ARM: dts: lager: rename and reindex i2cexio
ARM: dts: lager: use demuxer for IIC1/I2C1
ARM: dts: koelsch: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C4
ARM: dts: lager: Enable UHS-I SDR-104
ARM: dts: koelsch: Enable UHS-I SDR-104
ARM: dts: alt: Enable UHS-I SDR-104
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/r8a73a4.dtsi | 5 +
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 57 ++++
arch/arm/boot/dts/r8a7743.dtsi | 476 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 52 ++++
arch/arm/boot/dts/r8a7745.dtsi | 476 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7779.dtsi | 5 +
arch/arm/boot/dts/r8a7790-lager.dts | 52 +++-
arch/arm/boot/dts/r8a7790.dtsi | 5 +
arch/arm/boot/dts/r8a7791-koelsch.dts | 36 +++
arch/arm/boot/dts/r8a7791.dtsi | 5 +
arch/arm/boot/dts/r8a7792.dtsi | 5 +
arch/arm/boot/dts/r8a7793.dtsi | 5 +
arch/arm/boot/dts/r8a7794-alt.dts | 40 ++-
arch/arm/boot/dts/r8a7794.dtsi | 11 +-
15 files changed, 1220 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
create mode 100644 arch/arm/boot/dts/r8a7743.dtsi
create mode 100644 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
create mode 100644 arch/arm/boot/dts/r8a7745.dtsi
^ permalink raw reply [flat|nested] 74+ messages in thread
* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Hi Kevin, Hi Arnd,
Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
This pull request is based on a merge of:
* The previous round of such requests, tagged as renesas-dt-for-v4.10,
which I have already sent a pull-request for.
* The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
* The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
request for. This is included to provide dependencies for adding device
nodes for PRR, and adding the r8a7743 and r8a7745 SoCs..
The following changes since commit 71eaf88fb7784932956a998968f609c9a89cd739:
Merge branch 'rzg-clock-defs' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into dt-for-v4.10 (2016-11-17 14:58:57 +0100)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.10
for you to fetch changes up to cb74f5808db5105baaf127c51660bbb1a10313c4:
ARM: dts: r8a7794: Add device node for PRR (2016-11-17 15:07:49 +0100)
----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v4.10
Enhancements:
* Add device nodes for PRR
* Add r8a7745 SoC and sk-rzg1e board
* Add r8a7743 SoC and sk-rzg1m board
* Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards
Corrections:
* Use SYSC "always-on" PM Domain for sound on r8a7794 SoC
* Correct hsusb parent clock on r8a7794 SoC
* Correct PFC names for DU on alt board
----------------------------------------------------------------
Geert Uytterhoeven (9):
ARM: dts: r8a7794: Correct hsusb parent clock
ARM: dts: r8a7794: Use SYSC "always-on" PM Domain for sound
ARM: dts: r8a73a4: Add device node for PRR
ARM: dts: r8a7779: Add device node for PRR
ARM: dts: r8a7790: Add device node for PRR
ARM: dts: r8a7791: Add device node for PRR
ARM: dts: r8a7792: Add device node for PRR
ARM: dts: r8a7793: Add device node for PRR
ARM: dts: r8a7794: Add device node for PRR
Jacopo Mondi (1):
ARM: dts: alt: Fix PFC names for DU
Sergei Shtylyov (14):
ARM: dts: r8a7743: initial SoC device tree
ARM: dts: r8a7743: add SYS-DMAC support
ARM: dts: r8a7743: add [H]SCIF{A|B} support
ARM: dts: r8a7743: add Ether support
ARM: dts: r8a7743: add IRQC support
ARM: dts: sk-rzg1m: initial device tree
ARM: dts: sk-rzg1m: add Ether support
ARM: dts: r8a7745: initial SoC device tree
ARM: dts: r8a7745: add SYS-DMAC support
ARM: dts: r8a7745: add [H]SCIF{|A|B} support
ARM: dts: r8a7745: add Ether support
ARM: dts: r8a7745: add IRQC support
ARM: dts: sk-rzg1e: initial device tree
ARM: dts: sk-rzg1e: add Ether support
Simon Horman (7):
ARM: dts: lager: rename and reindex i2cexio
ARM: dts: lager: use demuxer for IIC1/I2C1
ARM: dts: koelsch: use demuxer for I2C1
ARM: dts: alt: use demuxer for I2C4
ARM: dts: lager: Enable UHS-I SDR-104
ARM: dts: koelsch: Enable UHS-I SDR-104
ARM: dts: alt: Enable UHS-I SDR-104
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/r8a73a4.dtsi | 5 +
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts | 57 ++++
arch/arm/boot/dts/r8a7743.dtsi | 476 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts | 52 ++++
arch/arm/boot/dts/r8a7745.dtsi | 476 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/r8a7779.dtsi | 5 +
arch/arm/boot/dts/r8a7790-lager.dts | 52 +++-
arch/arm/boot/dts/r8a7790.dtsi | 5 +
arch/arm/boot/dts/r8a7791-koelsch.dts | 36 +++
arch/arm/boot/dts/r8a7791.dtsi | 5 +
arch/arm/boot/dts/r8a7792.dtsi | 5 +
arch/arm/boot/dts/r8a7793.dtsi | 5 +
arch/arm/boot/dts/r8a7794-alt.dts | 40 ++-
arch/arm/boot/dts/r8a7794.dtsi | 11 +-
15 files changed, 1220 insertions(+), 12 deletions(-)
create mode 100644 arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
create mode 100644 arch/arm/boot/dts/r8a7743.dtsi
create mode 100644 arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
create mode 100644 arch/arm/boot/dts/r8a7745.dtsi
^ permalink raw reply [flat|nested] 74+ messages in thread
* [PATCH 28/31] ARM: dts: r8a7791: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7791.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 091d7fb6ee7d..4c50de2faef1 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1485,6 +1485,11 @@
};
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7791-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 29/31] ARM: dts: r8a7792: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index a75e0cd312c5..69789020cf39 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -120,6 +120,11 @@
IRQ_TYPE_LEVEL_LOW)>;
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7792-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 29/31] ARM: dts: r8a7792: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7792.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index a75e0cd312c5..69789020cf39 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -120,6 +120,11 @@
IRQ_TYPE_LEVEL_LOW)>;
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7792-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 30/31] ARM: dts: r8a7793: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 629d3d60d1cd..a377dda17724 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1306,6 +1306,11 @@
};
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7793-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 30/31] ARM: dts: r8a7793: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7793.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 629d3d60d1cd..a377dda17724 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1306,6 +1306,11 @@
};
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7793-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 31/31] ARM: dts: r8a7794: Add device node for PRR
2016-11-17 14:11 ` Simon Horman
@ 2016-11-17 14:11 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 364b4aa8d1c1..63dc7f29d216 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1377,6 +1377,11 @@
};
};
+ prr: chipid@ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller@e6180000 {
compatible = "renesas,r8a7794-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 31/31] ARM: dts: r8a7794: Add device node for PRR
@ 2016-11-17 14:11 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-17 14:11 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 364b4aa8d1c1..63dc7f29d216 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1377,6 +1377,11 @@
};
};
+ prr: chipid at ff000044 {
+ compatible = "renesas,prr";
+ reg = <0 0xff000044 0 4>;
+ };
+
sysc: system-controller at e6180000 {
compatible = "renesas,r8a7794-sysc";
reg = <0 0xe6180000 0 0x0200>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
2016-11-17 14:11 ` Simon Horman
@ 2016-11-19 1:49 ` Olof Johansson
-1 siblings, 0 replies; 74+ messages in thread
From: Olof Johansson @ 2016-11-19 1:49 UTC (permalink / raw)
To: Simon Horman
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
>
> This pull request is based on a merge of:
>
> * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> which I have already sent a pull-request for.
> * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> request for. This is included to provide dependencies for adding device
> nodes for PRR, and adding the r8a7743 and r8a7745 SoCs..
Again, nack. And again, I don't understand why you create dependencies that
aren't needed. Please fix.
-Olof
^ permalink raw reply [flat|nested] 74+ messages in thread
* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
@ 2016-11-19 1:49 ` Olof Johansson
0 siblings, 0 replies; 74+ messages in thread
From: Olof Johansson @ 2016-11-19 1:49 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
>
> Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
>
> This pull request is based on a merge of:
>
> * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> which I have already sent a pull-request for.
> * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> request for. This is included to provide dependencies for adding device
> nodes for PRR, and adding the r8a7743 and r8a7745 SoCs..
Again, nack. And again, I don't understand why you create dependencies that
aren't needed. Please fix.
-Olof
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
2016-11-19 1:49 ` Olof Johansson
@ 2016-11-21 10:53 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-21 10:53 UTC (permalink / raw)
To: Olof Johansson
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Fri, Nov 18, 2016 at 05:49:29PM -0800, Olof Johansson wrote:
> On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
> >
> > This pull request is based on a merge of:
> >
> > * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> > which I have already sent a pull-request for.
> > * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> > This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > request for. This is included to provide dependencies for adding device
> > nodes for PRR, and adding the r8a7743 and r8a7745 SoCs.
>
> Again, nack. And again, I don't understand why you create dependencies that
> aren't needed. Please fix.
Hi Olof,
I agree that calling out PRR above was incorrect. Please disregard that.
However, there are dependencies for adding r8a7743 and r8a7745 SoCs
in the form of header files:
* The rzg-clock-defs tag provides dt-bindings/clock/r8a774[35]-cpg-mssr.h
* The renesas-drivers2-for-v4.10 tag provides
dt-bindings/power/r8a774[35]-sysc.h
The drivers branches are usually pretty light-weight. But this time it is a
bit heavy and you rightly raised some questions about it. After some
discussion with Geert we'd like to suggest that for future releases
we provide a "driver-defs" branch which both driver code and DT can
depend on. Thus avoiding pulling (non essential) driver changes into the DT
branch.
Unfortunately its a bit late to do that for v4.10 as the r8a7743 sysc
driver and its defines were already accepted accepted together
(renesas-drivers-for-v4.10 tag). So for this release we would be grateful
if you could re-consider the renesas-drivers2-for-v4.10 tag given the
feedback which Geert has provided. And in turn re-consider this pull
request.
^ permalink raw reply [flat|nested] 74+ messages in thread
* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
@ 2016-11-21 10:53 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-21 10:53 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Nov 18, 2016 at 05:49:29PM -0800, Olof Johansson wrote:
> On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> > Hi Olof, Hi Kevin, Hi Arnd,
> >
> > Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
> >
> > This pull request is based on a merge of:
> >
> > * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> > which I have already sent a pull-request for.
> > * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> > This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > request for. This is included to provide dependencies for adding device
> > nodes for PRR, and adding the r8a7743 and r8a7745 SoCs.
>
> Again, nack. And again, I don't understand why you create dependencies that
> aren't needed. Please fix.
Hi Olof,
I agree that calling out PRR above was incorrect. Please disregard that.
However, there are dependencies for adding r8a7743 and r8a7745 SoCs
in the form of header files:
* The rzg-clock-defs tag provides dt-bindings/clock/r8a774[35]-cpg-mssr.h
* The renesas-drivers2-for-v4.10 tag provides
dt-bindings/power/r8a774[35]-sysc.h
The drivers branches are usually pretty light-weight. But this time it is a
bit heavy and you rightly raised some questions about it. After some
discussion with Geert we'd like to suggest that for future releases
we provide a "driver-defs" branch which both driver code and DT can
depend on. Thus avoiding pulling (non essential) driver changes into the DT
branch.
Unfortunately its a bit late to do that for v4.10 as the r8a7743 sysc
driver and its defines were already accepted accepted together
(renesas-drivers-for-v4.10 tag). So for this release we would be grateful
if you could re-consider the renesas-drivers2-for-v4.10 tag given the
feedback which Geert has provided. And in turn re-consider this pull
request.
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
2016-11-21 10:53 ` Simon Horman
@ 2016-11-23 9:57 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-23 9:57 UTC (permalink / raw)
To: Olof Johansson
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Mon, Nov 21, 2016 at 11:53:18AM +0100, Simon Horman wrote:
> On Fri, Nov 18, 2016 at 05:49:29PM -0800, Olof Johansson wrote:
> > On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> > > Hi Olof, Hi Kevin, Hi Arnd,
> > >
> > > Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
> > >
> > > This pull request is based on a merge of:
> > >
> > > * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> > > which I have already sent a pull-request for.
> > > * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> > > This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> > > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > > request for. This is included to provide dependencies for adding device
> > > nodes for PRR, and adding the r8a7743 and r8a7745 SoCs.
> >
> > Again, nack. And again, I don't understand why you create dependencies that
> > aren't needed. Please fix.
>
> Hi Olof,
>
> I agree that calling out PRR above was incorrect. Please disregard that.
>
> However, there are dependencies for adding r8a7743 and r8a7745 SoCs
> in the form of header files:
>
> * The rzg-clock-defs tag provides dt-bindings/clock/r8a774[35]-cpg-mssr.h
> * The renesas-drivers2-for-v4.10 tag provides
> dt-bindings/power/r8a774[35]-sysc.h
>
> The drivers branches are usually pretty light-weight. But this time it is a
> bit heavy and you rightly raised some questions about it. After some
> discussion with Geert we'd like to suggest that for future releases
> we provide a "driver-defs" branch which both driver code and DT can
> depend on. Thus avoiding pulling (non essential) driver changes into the DT
> branch.
>
> Unfortunately its a bit late to do that for v4.10 as the r8a7743 sysc
> driver and its defines were already accepted accepted together
> (renesas-drivers-for-v4.10 tag). So for this release we would be grateful
> if you could re-consider the renesas-drivers2-for-v4.10 tag given the
> feedback which Geert has provided. And in turn re-consider this pull
> request.
Hi again,
while the above remains my preferred option I would like to put another one
on the table in case it would help in any way for v4.10.
I could split this pull-request up as follows:
1. The patches that add the r8a774[35] SoCs:
- r8a7743 depends on renesas-drivers-for-v4.10 and rzg-clock-defs
- r8a7745 depends on renesas-drivers2-for-v4.10 and rzg-clock-defs
2. The patches rest of the patches
- I believe these have no special dependencies
^ permalink raw reply [flat|nested] 74+ messages in thread
* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
@ 2016-11-23 9:57 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-23 9:57 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Nov 21, 2016 at 11:53:18AM +0100, Simon Horman wrote:
> On Fri, Nov 18, 2016 at 05:49:29PM -0800, Olof Johansson wrote:
> > On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> > > Hi Olof, Hi Kevin, Hi Arnd,
> > >
> > > Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
> > >
> > > This pull request is based on a merge of:
> > >
> > > * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> > > which I have already sent a pull-request for.
> > > * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> > > This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> > > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > > request for. This is included to provide dependencies for adding device
> > > nodes for PRR, and adding the r8a7743 and r8a7745 SoCs.
> >
> > Again, nack. And again, I don't understand why you create dependencies that
> > aren't needed. Please fix.
>
> Hi Olof,
>
> I agree that calling out PRR above was incorrect. Please disregard that.
>
> However, there are dependencies for adding r8a7743 and r8a7745 SoCs
> in the form of header files:
>
> * The rzg-clock-defs tag provides dt-bindings/clock/r8a774[35]-cpg-mssr.h
> * The renesas-drivers2-for-v4.10 tag provides
> dt-bindings/power/r8a774[35]-sysc.h
>
> The drivers branches are usually pretty light-weight. But this time it is a
> bit heavy and you rightly raised some questions about it. After some
> discussion with Geert we'd like to suggest that for future releases
> we provide a "driver-defs" branch which both driver code and DT can
> depend on. Thus avoiding pulling (non essential) driver changes into the DT
> branch.
>
> Unfortunately its a bit late to do that for v4.10 as the r8a7743 sysc
> driver and its defines were already accepted accepted together
> (renesas-drivers-for-v4.10 tag). So for this release we would be grateful
> if you could re-consider the renesas-drivers2-for-v4.10 tag given the
> feedback which Geert has provided. And in turn re-consider this pull
> request.
Hi again,
while the above remains my preferred option I would like to put another one
on the table in case it would help in any way for v4.10.
I could split this pull-request up as follows:
1. The patches that add the r8a774[35] SoCs:
- r8a7743 depends on renesas-drivers-for-v4.10 and rzg-clock-defs
- r8a7745 depends on renesas-drivers2-for-v4.10 and rzg-clock-defs
2. The patches rest of the patches
- I believe these have no special dependencies
^ permalink raw reply [flat|nested] 74+ messages in thread
* Re: [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
2016-11-23 9:57 ` Simon Horman
@ 2016-11-23 14:16 ` Simon Horman
-1 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-23 14:16 UTC (permalink / raw)
To: Olof Johansson
Cc: arm, linux-renesas-soc, Kevin Hilman, Arnd Bergmann,
linux-arm-kernel, Magnus Damm
On Wed, Nov 23, 2016 at 10:57:18AM +0100, Simon Horman wrote:
> On Mon, Nov 21, 2016 at 11:53:18AM +0100, Simon Horman wrote:
> > On Fri, Nov 18, 2016 at 05:49:29PM -0800, Olof Johansson wrote:
> > > On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> > > > Hi Olof, Hi Kevin, Hi Arnd,
> > > >
> > > > Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
> > > >
> > > > This pull request is based on a merge of:
> > > >
> > > > * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> > > > which I have already sent a pull-request for.
> > > > * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> > > > This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> > > > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > > > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > > > request for. This is included to provide dependencies for adding device
> > > > nodes for PRR, and adding the r8a7743 and r8a7745 SoCs.
> > >
> > > Again, nack. And again, I don't understand why you create dependencies that
> > > aren't needed. Please fix.
> >
> > Hi Olof,
> >
> > I agree that calling out PRR above was incorrect. Please disregard that.
> >
> > However, there are dependencies for adding r8a7743 and r8a7745 SoCs
> > in the form of header files:
> >
> > * The rzg-clock-defs tag provides dt-bindings/clock/r8a774[35]-cpg-mssr.h
> > * The renesas-drivers2-for-v4.10 tag provides
> > dt-bindings/power/r8a774[35]-sysc.h
> >
> > The drivers branches are usually pretty light-weight. But this time it is a
> > bit heavy and you rightly raised some questions about it. After some
> > discussion with Geert we'd like to suggest that for future releases
> > we provide a "driver-defs" branch which both driver code and DT can
> > depend on. Thus avoiding pulling (non essential) driver changes into the DT
> > branch.
> >
> > Unfortunately its a bit late to do that for v4.10 as the r8a7743 sysc
> > driver and its defines were already accepted accepted together
> > (renesas-drivers-for-v4.10 tag). So for this release we would be grateful
> > if you could re-consider the renesas-drivers2-for-v4.10 tag given the
> > feedback which Geert has provided. And in turn re-consider this pull
> > request.
>
> Hi again,
>
> while the above remains my preferred option I would like to put another one
> on the table in case it would help in any way for v4.10.
>
> I could split this pull-request up as follows:
> 1. The patches that add the r8a774[35] SoCs:
> - r8a7743 depends on renesas-drivers-for-v4.10 and rzg-clock-defs
> - r8a7745 depends on renesas-drivers2-for-v4.10 and rzg-clock-defs
> 2. The patches rest of the patches
> - I believe these have no special dependencies
After some discussion on IRC with Arnd I think it makes sense to simplify
the dependencies pulled in to this pull request to the extent of
only pulling in patches which provide headers for macros used in DT.
I am working on making this so.
^ permalink raw reply [flat|nested] 74+ messages in thread
* [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10
@ 2016-11-23 14:16 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-23 14:16 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Nov 23, 2016 at 10:57:18AM +0100, Simon Horman wrote:
> On Mon, Nov 21, 2016 at 11:53:18AM +0100, Simon Horman wrote:
> > On Fri, Nov 18, 2016 at 05:49:29PM -0800, Olof Johansson wrote:
> > > On Thu, Nov 17, 2016 at 03:11:45PM +0100, Simon Horman wrote:
> > > > Hi Olof, Hi Kevin, Hi Arnd,
> > > >
> > > > Please consider these second round of Renesas ARM based SoC DT updates for v4.10.
> > > >
> > > > This pull request is based on a merge of:
> > > >
> > > > * The previous round of such requests, tagged as renesas-dt-for-v4.10,
> > > > which I have already sent a pull-request for.
> > > > * The rzg-clock-defs tag of Geert Uytterhoeven's renesas-driver's tree.
> > > > This is to provide dependencies for adding the r8a7743 and r8a7745 SoCs.
> > > > * The "Second Round of Renesas ARM Based SoC Drivers Updates for v4.10",
> > > > tagged as renesas-drivers2-for-v4.10, which I have also sent a pull
> > > > request for. This is included to provide dependencies for adding device
> > > > nodes for PRR, and adding the r8a7743 and r8a7745 SoCs.
> > >
> > > Again, nack. And again, I don't understand why you create dependencies that
> > > aren't needed. Please fix.
> >
> > Hi Olof,
> >
> > I agree that calling out PRR above was incorrect. Please disregard that.
> >
> > However, there are dependencies for adding r8a7743 and r8a7745 SoCs
> > in the form of header files:
> >
> > * The rzg-clock-defs tag provides dt-bindings/clock/r8a774[35]-cpg-mssr.h
> > * The renesas-drivers2-for-v4.10 tag provides
> > dt-bindings/power/r8a774[35]-sysc.h
> >
> > The drivers branches are usually pretty light-weight. But this time it is a
> > bit heavy and you rightly raised some questions about it. After some
> > discussion with Geert we'd like to suggest that for future releases
> > we provide a "driver-defs" branch which both driver code and DT can
> > depend on. Thus avoiding pulling (non essential) driver changes into the DT
> > branch.
> >
> > Unfortunately its a bit late to do that for v4.10 as the r8a7743 sysc
> > driver and its defines were already accepted accepted together
> > (renesas-drivers-for-v4.10 tag). So for this release we would be grateful
> > if you could re-consider the renesas-drivers2-for-v4.10 tag given the
> > feedback which Geert has provided. And in turn re-consider this pull
> > request.
>
> Hi again,
>
> while the above remains my preferred option I would like to put another one
> on the table in case it would help in any way for v4.10.
>
> I could split this pull-request up as follows:
> 1. The patches that add the r8a774[35] SoCs:
> - r8a7743 depends on renesas-drivers-for-v4.10 and rzg-clock-defs
> - r8a7745 depends on renesas-drivers2-for-v4.10 and rzg-clock-defs
> 2. The patches rest of the patches
> - I believe these have no special dependencies
After some discussion on IRC with Arnd I think it makes sense to simplify
the dependencies pulled in to this pull request to the extent of
only pulling in patches which provide headers for macros used in DT.
I am working on making this so.
^ permalink raw reply [flat|nested] 74+ messages in thread
* [PATCH 02/31] ARM: dts: r8a7794: Correct hsusb parent clock
2016-11-23 20:14 [GIT PULL v2] " Simon Horman
@ 2016-11-23 20:14 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-23 20:14 UTC (permalink / raw)
To: linux-renesas-soc
Cc: linux-arm-kernel, Magnus Damm, Geert Uytterhoeven, Simon Horman
From: Geert Uytterhoeven <geert+renesas@glider.be>
The parent clock of the HSUSB clock is the HP clock, not the MP clock.
Fixes: c7bab9f929e51761 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 01816ac775a8..7d9f0601d3ca 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1262,7 +1262,7 @@
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&mp_clk>,
+ clocks = <&mp_clk>, <&hp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
* [PATCH 02/31] ARM: dts: r8a7794: Correct hsusb parent clock
@ 2016-11-23 20:14 ` Simon Horman
0 siblings, 0 replies; 74+ messages in thread
From: Simon Horman @ 2016-11-23 20:14 UTC (permalink / raw)
To: linux-arm-kernel
From: Geert Uytterhoeven <geert+renesas@glider.be>
The parent clock of the HSUSB clock is the HP clock, not the MP clock.
Fixes: c7bab9f929e51761 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
arch/arm/boot/dts/r8a7794.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 01816ac775a8..7d9f0601d3ca 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1262,7 +1262,7 @@
mstp7_clks: mstp7_clks at e615014c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
- clocks = <&mp_clk>, <&mp_clk>,
+ clocks = <&mp_clk>, <&hp_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
<&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
<&zx_clk>;
--
2.7.0.rc3.207.g0ac5344
^ permalink raw reply related [flat|nested] 74+ messages in thread
end of thread, other threads:[~2016-11-23 20:15 UTC | newest]
Thread overview: 74+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-17 14:11 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10 Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 01/31] ARM: dts: alt: Fix PFC names for DU Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 02/31] ARM: dts: r8a7794: Correct hsusb parent clock Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 03/31] ARM: dts: r8a7794: Use SYSC "always-on" PM Domain for sound Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 04/31] ARM: dts: lager: rename and reindex i2cexio Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 05/31] ARM: dts: lager: use demuxer for IIC1/I2C1 Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 06/31] ARM: dts: koelsch: use demuxer for I2C1 Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 07/31] ARM: dts: alt: use demuxer for I2C4 Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 08/31] ARM: dts: lager: Enable UHS-I SDR-104 Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 09/31] ARM: dts: koelsch: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 10/31] ARM: dts: alt: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 11/31] ARM: dts: r8a7743: initial SoC device tree Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 12/31] ARM: dts: r8a7743: add SYS-DMAC support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 13/31] ARM: dts: r8a7743: add [H]SCIF{A|B} support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 14/31] ARM: dts: r8a7743: add Ether support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 15/31] ARM: dts: r8a7743: add IRQC support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 16/31] ARM: dts: sk-rzg1m: initial device tree Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 17/31] ARM: dts: sk-rzg1m: add Ether support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 18/31] ARM: dts: r8a7745: initial SoC device tree Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 19/31] ARM: dts: r8a7745: add SYS-DMAC support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 20/31] ARM: dts: r8a7745: add [H]SCIF{|A|B} support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 21/31] ARM: dts: r8a7745: add Ether support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 22/31] ARM: dts: r8a7745: add IRQC support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 23/31] ARM: dts: sk-rzg1e: initial device tree Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 24/31] ARM: dts: sk-rzg1e: add Ether support Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 25/31] ARM: dts: r8a73a4: Add device node for PRR Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 26/31] ARM: dts: r8a7779: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 27/31] ARM: dts: r8a7790: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 28/31] ARM: dts: r8a7791: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 29/31] ARM: dts: r8a7792: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 30/31] ARM: dts: r8a7793: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-17 14:11 ` [PATCH 31/31] ARM: dts: r8a7794: " Simon Horman
2016-11-17 14:11 ` Simon Horman
2016-11-19 1:49 ` [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.10 Olof Johansson
2016-11-19 1:49 ` Olof Johansson
2016-11-21 10:53 ` Simon Horman
2016-11-21 10:53 ` Simon Horman
2016-11-23 9:57 ` Simon Horman
2016-11-23 9:57 ` Simon Horman
2016-11-23 14:16 ` Simon Horman
2016-11-23 14:16 ` Simon Horman
2016-11-23 20:14 [GIT PULL v2] " Simon Horman
2016-11-23 20:14 ` [PATCH 02/31] ARM: dts: r8a7794: Correct hsusb parent clock Simon Horman
2016-11-23 20:14 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.