* audio lost from speaker after reboot from windows on the device ALC295
@ 2019-07-04 12:02 He, Bo
2019-07-04 23:27 ` Hui Wang
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: He, Bo @ 2019-07-04 12:02 UTC (permalink / raw)
To: kailang, alsa-devel, linux-kernel
Cc: perex, tiwai, jian-hong, drake, chiu, hui.wang
Hi, patch_realtek.c maintainer:
I see one issue that reboot from windows and boot to ubuntu, the audio lost from speaker, I suspect there are some bugs in patch_realtek.c drivers, the device is ALC295 and the device id is 0x10ec0295.
I have done the below experiments:
1. reboot from windows to windows, the audio is persist .
2. reboot from windows to ubuntu, the audio lost from speaker, but can hear if I hotplug one earphone.
3. if the issue reproduce after reboot from windows, reboot the ubuntu can't restore the audio, I suspect it's warm reset.
4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
5. if I do suspend/resume, the audio can restore, I suspect do cold boot and suspend will trigger the platform reset to reset the ALC295.
6. if I do double function reset (write the verb 0x7ff in alc_init), the audio is still can't restore.
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /* Function reset */
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */
7. the issue is first found on kernel 4.19.50, I still see the issue with the latest kernel 5.2-rc2, is it possible windows change some default registers, but ALC295 don't initialize the register?
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: audio lost from speaker after reboot from windows on the device ALC295
2019-07-04 12:02 audio lost from speaker after reboot from windows on the device ALC295 He, Bo
@ 2019-07-04 23:27 ` Hui Wang
2019-07-05 2:41 ` Kailang
2019-07-05 2:42 ` Kailang
2 siblings, 0 replies; 7+ messages in thread
From: Hui Wang @ 2019-07-04 23:27 UTC (permalink / raw)
To: He, Bo, kailang, alsa-devel, linux-kernel
Cc: perex, tiwai, jian-hong, drake, chiu
Maybe your machine has an external amplifier which needs to be set by
software before it can work.
On 2019/7/4 下午8:02, He, Bo wrote:
> Hi, patch_realtek.c maintainer:
> I see one issue that reboot from windows and boot to ubuntu, the audio lost from speaker, I suspect there are some bugs in patch_realtek.c drivers, the device is ALC295 and the device id is 0x10ec0295.
>
> I have done the below experiments:
> 1. reboot from windows to windows, the audio is persist .
> 2. reboot from windows to ubuntu, the audio lost from speaker, but can hear if I hotplug one earphone.
> 3. if the issue reproduce after reboot from windows, reboot the ubuntu can't restore the audio, I suspect it's warm reset.
> 4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
> 5. if I do suspend/resume, the audio can restore, I suspect do cold boot and suspend will trigger the platform reset to reset the ALC295.
> 6. if I do double function reset (write the verb 0x7ff in alc_init), the audio is still can't restore.
> snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /* Function reset */
> snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */
> 7. the issue is first found on kernel 4.19.50, I still see the issue with the latest kernel 5.2-rc2, is it possible windows change some default registers, but ALC295 don't initialize the register?
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: audio lost from speaker after reboot from windows on the device ALC295
2019-07-04 12:02 audio lost from speaker after reboot from windows on the device ALC295 He, Bo
@ 2019-07-05 2:41 ` Kailang
2019-07-05 2:41 ` Kailang
2019-07-05 2:42 ` Kailang
2 siblings, 0 replies; 7+ messages in thread
From: Kailang @ 2019-07-05 2:41 UTC (permalink / raw)
To: He, Bo, alsa-devel, linux-kernel
Cc: perex, tiwai, jian-hong, drake, chiu, hui.wang
Hi Bo He,
Could you help to dump info for us?
Please use attach file to get results.
./alsa-info.sh --no-upload
You will find dump file in folder /tmp/alsa-info.txt-????????.
Please run one time in normal state and one time in fail state.
Please send two result files to me.
BR,
Kailang
> -----Original Message-----
> From: He, Bo <bo.he@intel.com>
> Sent: Thursday, July 4, 2019 8:02 PM
> To: Kailang <kailang@realtek.com>; alsa-devel@alsa-project.org;
> linux-kernel@vger.kernel.org
> Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> Subject: audio lost from speaker after reboot from windows on the device
> ALC295
>
> Hi, patch_realtek.c maintainer:
> I see one issue that reboot from windows and boot to ubuntu, the audio
> lost from speaker, I suspect there are some bugs in patch_realtek.c drivers,
> the device is ALC295 and the device id is 0x10ec0295.
>
> I have done the below experiments:
> 1. reboot from windows to windows, the audio is persist .
> 2. reboot from windows to ubuntu, the audio lost from speaker, but can hear if
> I hotplug one earphone.
> 3. if the issue reproduce after reboot from windows, reboot the ubuntu can't
> restore the audio, I suspect it's warm reset.
> 4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
> 5. if I do suspend/resume, the audio can restore, I suspect do cold boot and
> suspend will trigger the platform reset to reset the ALC295.
> 6. if I do double function reset (write the verb 0x7ff in alc_init), the audio is
> still can't restore.
> snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /*
> Function reset */ snd_hda_codec_write(codec, 0x01, 0,
> AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */ 7. the issue is
> first found on kernel 4.19.50, I still see the issue with the latest kernel 5.2-rc2,
> is it possible windows change some default registers, but ALC295 don't
> initialize the register?
>
> ------Please consider the environment before printing this e-mail.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: audio lost from speaker after reboot from windows on the device ALC295
@ 2019-07-05 2:41 ` Kailang
0 siblings, 0 replies; 7+ messages in thread
From: Kailang @ 2019-07-05 2:41 UTC (permalink / raw)
To: He, Bo, alsa-devel, linux-kernel; +Cc: chiu, tiwai, drake, hui.wang, jian-hong
Hi Bo He,
Could you help to dump info for us?
Please use attach file to get results.
./alsa-info.sh --no-upload
You will find dump file in folder /tmp/alsa-info.txt-????????.
Please run one time in normal state and one time in fail state.
Please send two result files to me.
BR,
Kailang
> -----Original Message-----
> From: He, Bo <bo.he@intel.com>
> Sent: Thursday, July 4, 2019 8:02 PM
> To: Kailang <kailang@realtek.com>; alsa-devel@alsa-project.org;
> linux-kernel@vger.kernel.org
> Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> Subject: audio lost from speaker after reboot from windows on the device
> ALC295
>
> Hi, patch_realtek.c maintainer:
> I see one issue that reboot from windows and boot to ubuntu, the audio
> lost from speaker, I suspect there are some bugs in patch_realtek.c drivers,
> the device is ALC295 and the device id is 0x10ec0295.
>
> I have done the below experiments:
> 1. reboot from windows to windows, the audio is persist .
> 2. reboot from windows to ubuntu, the audio lost from speaker, but can hear if
> I hotplug one earphone.
> 3. if the issue reproduce after reboot from windows, reboot the ubuntu can't
> restore the audio, I suspect it's warm reset.
> 4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
> 5. if I do suspend/resume, the audio can restore, I suspect do cold boot and
> suspend will trigger the platform reset to reset the ALC295.
> 6. if I do double function reset (write the verb 0x7ff in alc_init), the audio is
> still can't restore.
> snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /*
> Function reset */ snd_hda_codec_write(codec, 0x01, 0,
> AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */ 7. the issue is
> first found on kernel 4.19.50, I still see the issue with the latest kernel 5.2-rc2,
> is it possible windows change some default registers, but ALC295 don't
> initialize the register?
>
> ------Please consider the environment before printing this e-mail.
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: audio lost from speaker after reboot from windows on the device ALC295
2019-07-04 12:02 audio lost from speaker after reboot from windows on the device ALC295 He, Bo
@ 2019-07-05 2:42 ` Kailang
2019-07-05 2:41 ` Kailang
2019-07-05 2:42 ` Kailang
2 siblings, 0 replies; 7+ messages in thread
From: Kailang @ 2019-07-05 2:42 UTC (permalink / raw)
To: He, Bo, alsa-devel, linux-kernel
Cc: perex, tiwai, jian-hong, drake, chiu, hui.wang
[-- Attachment #1: Type: text/plain, Size: 2659 bytes --]
Sorry!!
Forgot attach file.
> -----Original Message-----
> From: Kailang
> Sent: Friday, July 5, 2019 10:41 AM
> To: 'He, Bo' <bo.he@intel.com>; alsa-devel@alsa-project.org;
> linux-kernel@vger.kernel.org
> Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> Subject: RE: audio lost from speaker after reboot from windows on the device
> ALC295
>
> Hi Bo He,
>
> Could you help to dump info for us?
> Please use attach file to get results.
>
> ./alsa-info.sh --no-upload
>
> You will find dump file in folder /tmp/alsa-info.txt-????????.
>
> Please run one time in normal state and one time in fail state.
> Please send two result files to me.
>
> BR,
> Kailang
>
> > -----Original Message-----
> > From: He, Bo <bo.he@intel.com>
> > Sent: Thursday, July 4, 2019 8:02 PM
> > To: Kailang <kailang@realtek.com>; alsa-devel@alsa-project.org;
> > linux-kernel@vger.kernel.org
> > Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> > drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> > Subject: audio lost from speaker after reboot from windows on the
> > device
> > ALC295
> >
> > Hi, patch_realtek.c maintainer:
> > I see one issue that reboot from windows and boot to ubuntu, the
> > audio lost from speaker, I suspect there are some bugs in
> > patch_realtek.c drivers, the device is ALC295 and the device id is
> 0x10ec0295.
> >
> > I have done the below experiments:
> > 1. reboot from windows to windows, the audio is persist .
> > 2. reboot from windows to ubuntu, the audio lost from speaker, but can
> > hear if I hotplug one earphone.
> > 3. if the issue reproduce after reboot from windows, reboot the ubuntu
> > can't restore the audio, I suspect it's warm reset.
> > 4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
> > 5. if I do suspend/resume, the audio can restore, I suspect do cold
> > boot and suspend will trigger the platform reset to reset the ALC295.
> > 6. if I do double function reset (write the verb 0x7ff in alc_init),
> > the audio is still can't restore.
> > snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /*
> > Function reset */ snd_hda_codec_write(codec, 0x01, 0,
> > AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */ 7. the issue
> > is first found on kernel 4.19.50, I still see the issue with the
> > latest kernel 5.2-rc2, is it possible windows change some default
> > registers, but ALC295 don't initialize the register?
> >
> > ------Please consider the environment before printing this e-mail.
[-- Attachment #2: alsa-info.sh --]
[-- Type: application/octet-stream, Size: 27734 bytes --]
#!/bin/bash
echo 1 > /sys/module/snd_hda_codec/parameters/dump_coef
SCRIPT_VERSION=0.4.63
CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"
#################################################################################
#Copyright (C) 2007 Free Software Foundation.
#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.
#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##################################################################################
#The script was written for 2 main reasons:
# 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
# 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.
#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C
#Change the PATH variable, so we can run lspci (needed for some distros)
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"
#Define some simple functions
pbcheck(){
[[ $UPLOAD = "no" ]] && return
if [[ -z $PASTEBIN ]]; then
[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
else
[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
fi
}
update() {
SHFILE=`mktemp -t alsa-info.XXXXXXXXXX` || exit 1
wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
REMOTE_VERSION=`grep SCRIPT_VERSION $SHFILE |head -n1 |sed 's/.*=//'`
if [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
if [[ -n $DIALOG ]]
then
OVERWRITE=
if [ -w $0 ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
DIALOG_EXIT_CODE=$?
if [[ $DIALOG_EXIT_CODE = 0 ]]; then
OVERWRITE=yes
fi
fi
if [ -z "$OVERWRITE" ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
DIALOG_EXIT_CODE=$?
fi
if [[ $DIALOG_EXIT_CODE = 0 ]]
then
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ "$OVERWRITE" = "yes" ]; then
cp $SHFILE $0
echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
echo "Please re-run the script"
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded as $SHFILE."
echo "Please re-run the script from new location."
fi
exit
else
rm $SHFILE 2>/dev/null
fi
else
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ -w $0 ]; then
echo "The original file $0 will be overwritten!"
echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
cp $SHFILE $0
echo "ALSA-Info script has been updated. Please re-run it."
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded $SHFILE."
echo "Please, re-run it from new location."
fi
exit
fi
else
rm $SHFILE 2>/dev/null
fi
}
cleanup() {
if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
rm -rf "$TEMPDIR" 2>/dev/null
fi
test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}
withaplay() {
echo "!!Aplay/Arecord output" >> $FILE
echo "!!--------------------" >> $FILE
echo "" >> $FILE
echo "APLAY" >> $FILE
echo "" >> $FILE
aplay -l >> $FILE 2>&1
echo "" >> $FILE
echo "ARECORD" >> $FILE
echo "" >> $FILE
arecord -l >> $FILE 2>&1
echo "" >> $FILE
}
withlsmod() {
echo "!!All Loaded Modules" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
lsmod |awk {'print $1'} >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withamixer() {
echo "!!Amixer output" >> $FILE
echo "!!-------------" >> $FILE
echo "" >> $FILE
for i in `grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1} '` ; do
CARD_NAME=`grep "^ *$i " $TEMPDIR/alsacards.tmp|awk {'print $2'}`
echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE
echo "" >>$FILE
amixer -c$i info>> $FILE 2>&1
amixer -c$i>> $FILE 2>&1
echo "" >> $FILE
done
echo "" >> $FILE
}
withalsactl() {
echo "!!Alsactl output" >> $FILE
echo "!!--------------" >> $FILE
echo "" >> $FILE
exe=""
if [ -x /usr/sbin/alsactl ]; then
exe="/usr/sbin/alsactl"
fi
if [ -x /usr/local/sbin/alsactl ]; then
exe="/usr/local/sbin/alsactl"
fi
if [ -z "$exe" ]; then
exe=`whereis alsactl | cut -d ' ' -f 2`
fi
$exe -f $TEMPDIR/alsactl.tmp store
echo "--startcollapse--" >> $FILE
cat $TEMPDIR/alsactl.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withdevices() {
echo "!!ALSA Device nodes" >> $FILE
echo "!!-----------------" >> $FILE
echo "" >> $FILE
ls -la /dev/snd/* >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withconfigs() {
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!------------------------" >> $FILE
echo "" >> $FILE
#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file (~/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
if [[ -e $HOME/.asoundrc.asoundconf ]]
then
echo "!!asoundconf-generated config file" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc.asoundconf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
}
withsysfs() {
local i f
local printed=""
for i in /sys/class/sound/*; do
case "$i" in
*/hwC?D?)
if [ -f $i/init_pin_configs ]; then
if [ -z "$printed" ]; then
echo "!!Sysfs Files" >> $FILE
echo "!!-----------" >> $FILE
echo "" >> $FILE
fi
for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
echo "$i/$f:" >> $FILE
cat $i/$f >> $FILE
echo >> $FILE
done
printed=yes
fi
;;
esac
done
if [ -n "$printed" ]; then
echo "" >> $FILE
fi
}
withdmesg() {
echo "!!ALSA/HDA dmesg" >> $FILE
echo "!!--------------" >> $FILE
echo "" >> $FILE
dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withall() {
withdevices
withconfigs
withaplay
withamixer
withalsactl
withlsmod
withsysfs
withdmesg
}
get_alsa_library_version() {
ALSA_LIB_VERSION=`grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null|awk {'print $3'}|sed 's/"//g'`
if [ -z "$ALSA_LIB_VERSION" ]; then
if [ -f /etc/lsb-release ]; then
. /etc/lsb-release
case "$DISTRIB_ID" in
Ubuntu)
if which dpkg > /dev/null ; then
ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
fi
if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_LIB_VERSION=""
fi
return
;;
*)
return
;;
esac
elif [ -f /etc/debian_version ]; then
if which dpkg > /dev/null ; then
ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
fi
if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_LIB_VERSION=""
fi
return
fi
fi
}
#Run checks to make sure the programs we need are installed.
LSPCI=$(which lspci 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
TPUT=$(which tput 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);
#Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS=$(mount |grep sysfs|awk {'print $3'});
#Check modprobe config files for sound related options
SNDOPTIONS=$(modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')
KEEP_OUTPUT=
NFILE=""
PASTEBIN=""
WWWSERVICE="www.alsa-project.org"
WELCOME="yes"
PROCEED="yes"
UPLOAD="ask"
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT="no"
case "$1" in
--update|--help|--about)
WELCOME="no"
PROCEED="no"
;;
--upload)
UPLOAD="yes"
WELCOME="no"
;;
--no-upload)
UPLOAD="no"
WELCOME="no"
;;
--pastebin)
PASTEBIN="yes"
WWWSERVICE="pastebin"
;;
--no-dialog)
DIALOG=""
REPEAT=""
shift
;;
--stdout)
DIALOG=""
UPLOAD="no"
WELCOME="no"
TOSTDOUT="yes"
;;
esac
done
#Script header output.
if [ "$WELCOME" = "yes" ]; then
greeting_message="\
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See '$0 --help' for command line options.
"
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" \
--title "ALSA-Info script v $SCRIPT_VERSION" \
--msgbox "$greeting_message" 20 80
else
echo "ALSA Information Script v $SCRIPT_VERSION"
echo "--------------------------------"
echo "$greeting_message"
fi # dialog
fi # WELCOME
#Set the output file
TEMPDIR=`mktemp -t -d alsa-info.XXXXXXXXXX` || exit 1
FILE="$TEMPDIR/alsa-info.txt"
if [ -z "$NFILE" ]; then
NFILE=`mktemp -t alsa-info.txt.XXXXXXXXXX` || exit 1
fi
trap cleanup 0
if [ "$PROCEED" = "yes" ]; then
if [ -z "$LSPCI" ]; then
if [ -d /sys/bus/pci ]; then
echo "This script requires lspci. Please install it, and re-run this script."
exit 0
fi
fi
#Fetch the info and store in temp files/variables
DISTRO=`grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version}`
KERNEL_VERSION=`uname -r`
KERNEL_PROCESSOR=`uname -p`
KERNEL_MACHINE=`uname -m`
KERNEL_OS=`uname -o`
[[ `uname -v | grep SMP` ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
ALSA_DRIVER_VERSION=`cat /proc/asound/version |head -n1|awk {'print $7'} |sed 's/\.$//'`
get_alsa_library_version
ALSA_UTILS_VERSION=`amixer -v |awk {'print $3'}`
LAST_CARD=$((`grep "]: " /proc/asound/cards | wc -l` - 1 ))
ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ROARINST=$(which roard 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
# No root privileges are required when using sysfs method
DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
elif [ -x $DMIDECODE ]; then
DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
fi
cat /proc/asound/modules 2>/dev/null|awk {'print $2'}>$TEMPDIR/alsamodules.tmp
cat /proc/asound/cards >$TEMPDIR/alsacards.tmp
if [[ ! -z "$LSPCI" ]]; then
lspci |grep -i "multi\|audio">$TEMPDIR/lspci.tmp
fi
#Check for HDA-Intel cards codec#*
cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null
#Check for AC97 cards codec
cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null
#Check for USB mixer setup
cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null
#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=true&script=true&cardinfo=" > $FILE
else
echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
fi
echo "!!################################" >> $FILE
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!################################" >> $FILE
echo "" >> $FILE
echo "!!Script ran on: `LANG=C TZ=UTC date`" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer: $DMI_SYSTEM_MANUFACTURER" >> $FILE
echo "Product Name: $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
echo "Product Version: $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
echo "Firmware Version: $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo "Kernel release: $KERNEL_VERSION" >> $FILE
echo "Operating System: $KERNEL_OS" >> $FILE
echo "Architecture: $KERNEL_MACHINE" >> $FILE
echo "Processor: $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled: $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version: $ALSA_DRIVER_VERSION" >> $FILE
echo "Library version: $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version: $ALSA_UTILS_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!-------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsamodules.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----------------------------" >> $FILE
echo "" >> $FILE
if [[ -n $PAINST ]];then
[[ `pgrep '^(.*/)?pulseaudio$'` ]] && PARUNNING="Yes" || PARUNNING="No"
echo "Pulseaudio:" >> $FILE
echo " Installed - Yes ($PAINST)" >> $FILE
echo " Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ `pgrep '^(.*/)?esd$'` ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo " Installed - Yes ($ESDINST)" >> $FILE
echo " Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ `pgrep '^(.*/)?artsd$'` ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo " Installed - Yes ($ARTSINST)" >> $FILE
echo " Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ `pgrep '^(.*/)?jackd$'` ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo " Installed - Yes ($JACKINST)" >> $FILE
echo " Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ROARINST ]];then
[[ `pgrep '^(.*/)?roard$'` ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
echo "RoarAudio:" >> $FILE
echo " Installed - Yes ($ROARINST)" >> $FILE
echo " Running - $ROARRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!-----------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsacards.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
if [[ ! -z "$LSPCI" ]]; then
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!--------------------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Advanced information - PCI Vendor/Device/Subsystem ID's" >> $FILE
echo "!!-------------------------------------------------------" >> $FILE
echo "" >> $FILE
lspci -vvn |grep -A1 040[1-3] >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ "$SNDOPTIONS" ]
then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!--------------------------------" >> $FILE
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -d "$SYSFS" ]
then
echo "!!Loaded sound module options" >> $FILE
echo "!!---------------------------" >> $FILE
echo "" >> $FILE
for mod in `cat /proc/asound/modules|awk {'print $2'}`;do
echo "!!Module: $mod" >> $FILE
for params in `echo $SYSFS/module/$mod/parameters/*`; do
echo -ne "\t";
echo "$params : `cat $params`" | sed 's:.*/::';
done >> $FILE
echo "" >> $FILE
done
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
echo "!!HDA-Intel Codec information" >> $FILE
echo "!!---------------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
echo "!!AC97 Codec information" >> $FILE
echo "!!----------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97.tmp >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
echo "!!USB Mixer information" >> $FILE
echo "!!---------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#If no command line options are specified, then run as though --with-all was specified
if [ -z "$1" ]; then
update
withall
pbcheck
fi
fi # proceed
#loop through command line arguments, until none are left.
if [ -n "$1" ]; then
until [ -z "$1" ]
do
case "$1" in
--pastebin)
update
withall
pbcheck
;;
--update)
update
exit
;;
--upload)
UPLOAD="yes"
withall
;;
--no-upload)
UPLOAD="no"
withall
;;
--output)
shift
NFILE="$1"
KEEP_OUTPUT="yes"
;;
--debug)
echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
KEEP_FILES="yes"
echo ""
withall
;;
--with-all)
withall
;;
--with-aplay)
withaplay
;;
--with-amixer)
withamixer
;;
--with-alsactl)
withalsactl
;;
--with-devices)
withdevices
;;
--with-dmesg)
withdmesg
;;
--with-configs)
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!------------------------" >> $FILE
echo "" >> $FILE
#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
;;
--stdout)
UPLOAD="no"
withall
cat $FILE
rm $FILE
;;
--about)
echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
echo ""
echo " wishie - Script author and developer / Testing"
echo " crimsun - Various script ideas / Testing"
echo " gnubien - Various script ideas / Testing"
echo " GrueMaster - HDA Intel specific items / Testing"
echo " olegfink - Script update function"
echo " TheMuso - display to stdout functionality"
exit 0
;;
*)
echo "alsa-info.sh version $SCRIPT_VERSION"
echo ""
echo "Available options:"
echo " --with-aplay (includes the output of aplay -l)"
echo " --with-amixer (includes the output of amixer)"
echo " --with-alsactl (includes the output of alsactl)"
echo " --with-configs (includes the output of ~/.asoundrc and"
echo " /etc/asound.conf if they exist)"
echo " --with-devices (shows the device nodes in /dev/snd/)"
echo " --with-dmesg (shows the ALSA/HDA kernel messages)"
echo ""
echo " --output FILE (specify the file to output for no-upload mode)"
echo " --update (check server for script updates)"
echo " --upload (upload contents to remote server)"
echo " --no-upload (do not upload contents to remote server)"
echo " --pastebin (use http://pastebin.ca) as remote server"
echo " instead www.alsa-project.org"
echo " --stdout (print alsa information to standard output"
echo " instead of a file)"
echo " --about (show some information about the script)"
echo " --debug (will run the script as normal, but will not"
echo " delete $FILE)"
exit 0
;;
esac
shift 1
done
fi
if [ "$PROCEED" = "no" ]; then
exit 1
fi
if [ "$UPLOAD" = "ask" ]; then
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE != 0 ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
else
echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
read -e CONFIRM
if [ "$CONFIRM" != "y" ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
fi
fi
if [ "$UPLOAD" = "no" ]; then
if [ -z "$TOSTDOUT" ]; then
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
fi
if [[ -n $DIALOG ]]
then
if [[ -n $PBERROR ]]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
else
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
fi
else
echo
if [[ -n $PBERROR ]]; then
echo "An error occurred while contacting the $WWWSERVICE."
echo "Your information was NOT automatically uploaded."
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
else
if [ -z "$TOSTDOUT" ]; then
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
fi
fi
fi
exit
fi # UPLOAD
#Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt.
if
WGET=$(which wget 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ `wget --help |grep post-file` ]]
then
if [[ -n $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-project.org ..." 6 70 0
else
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0
fi
dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE = 0 ]; then
grep -v "alsa-info.txt" $FILE >$TEMPDIR/uploaded.txt
dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
fi
clear
# no dialog
else
if [[ -z $PASTEBIN ]]; then
echo -n "Uploading information to www.alsa-project.org ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://www.alsa-project.org/cardinfo-db/ &>$TEMPDIR/wget.tmp &
else
echo -n "Uploading information to www.pastebin.ca ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY &>$TEMPDIR/wget.tmp &
fi
#Progess spinner for wget transfer.
i=1
sp="/-\|"
echo -n ' '
while pgrep wget &>/dev/null
do
echo -en "\b${sp:i++%${#sp}:1}"
done
echo -e "\b Done!"
echo ""
fi #dialog
#See if tput is available, and use it if it is.
if [ -n "$TPUT" ]; then
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0`
else
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p';tput sgr0`
fi
else
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2`
else
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p'`
fi
fi
# Output the URL of the uploaded file.
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""
# We couldnt find a suitable wget, so tell the user to upload manually.
else
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
if [[ -z $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
echo ""
echo "Could not automatically upload output to http://www.alsa-project.org"
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post."
echo ""
else
echo ""
echo "Could not automatically upload output to http://www.pastebin.ca"
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post."
echo ""
fi
else
if [[ -z $PASTEBIN ]]; then
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project,org/cardinfo-db/ and submit your post." 25 100
else
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100
fi
fi
fi
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: audio lost from speaker after reboot from windows on the device ALC295
@ 2019-07-05 2:42 ` Kailang
0 siblings, 0 replies; 7+ messages in thread
From: Kailang @ 2019-07-05 2:42 UTC (permalink / raw)
To: He, Bo, alsa-devel, linux-kernel; +Cc: chiu, tiwai, drake, hui.wang, jian-hong
[-- Attachment #1: Type: text/plain, Size: 2659 bytes --]
Sorry!!
Forgot attach file.
> -----Original Message-----
> From: Kailang
> Sent: Friday, July 5, 2019 10:41 AM
> To: 'He, Bo' <bo.he@intel.com>; alsa-devel@alsa-project.org;
> linux-kernel@vger.kernel.org
> Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> Subject: RE: audio lost from speaker after reboot from windows on the device
> ALC295
>
> Hi Bo He,
>
> Could you help to dump info for us?
> Please use attach file to get results.
>
> ./alsa-info.sh --no-upload
>
> You will find dump file in folder /tmp/alsa-info.txt-????????.
>
> Please run one time in normal state and one time in fail state.
> Please send two result files to me.
>
> BR,
> Kailang
>
> > -----Original Message-----
> > From: He, Bo <bo.he@intel.com>
> > Sent: Thursday, July 4, 2019 8:02 PM
> > To: Kailang <kailang@realtek.com>; alsa-devel@alsa-project.org;
> > linux-kernel@vger.kernel.org
> > Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> > drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> > Subject: audio lost from speaker after reboot from windows on the
> > device
> > ALC295
> >
> > Hi, patch_realtek.c maintainer:
> > I see one issue that reboot from windows and boot to ubuntu, the
> > audio lost from speaker, I suspect there are some bugs in
> > patch_realtek.c drivers, the device is ALC295 and the device id is
> 0x10ec0295.
> >
> > I have done the below experiments:
> > 1. reboot from windows to windows, the audio is persist .
> > 2. reboot from windows to ubuntu, the audio lost from speaker, but can
> > hear if I hotplug one earphone.
> > 3. if the issue reproduce after reboot from windows, reboot the ubuntu
> > can't restore the audio, I suspect it's warm reset.
> > 4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
> > 5. if I do suspend/resume, the audio can restore, I suspect do cold
> > boot and suspend will trigger the platform reset to reset the ALC295.
> > 6. if I do double function reset (write the verb 0x7ff in alc_init),
> > the audio is still can't restore.
> > snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /*
> > Function reset */ snd_hda_codec_write(codec, 0x01, 0,
> > AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */ 7. the issue
> > is first found on kernel 4.19.50, I still see the issue with the
> > latest kernel 5.2-rc2, is it possible windows change some default
> > registers, but ALC295 don't initialize the register?
> >
> > ------Please consider the environment before printing this e-mail.
[-- Attachment #2: alsa-info.sh --]
[-- Type: application/octet-stream, Size: 27734 bytes --]
#!/bin/bash
echo 1 > /sys/module/snd_hda_codec/parameters/dump_coef
SCRIPT_VERSION=0.4.63
CHANGELOG="http://www.alsa-project.org/alsa-info.sh.changelog"
#################################################################################
#Copyright (C) 2007 Free Software Foundation.
#This program is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2 of the License, or
#(at your option) any later version.
#This program is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
#along with this program; if not, write to the Free Software
#Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##################################################################################
#The script was written for 2 main reasons:
# 1. Remove the need for the devs/helpers to ask several questions before we can easily help the user.
# 2. Allow newer/inexperienced ALSA users to give us all the info we need to help them.
#Set the locale (this may or may not be a good idea.. let me know)
export LC_ALL=C
#Change the PATH variable, so we can run lspci (needed for some distros)
PATH=$PATH:/bin:/sbin:/usr/bin:/usr/sbin
BGTITLE="ALSA-Info v $SCRIPT_VERSION"
PASTEBINKEY="C9cRIO8m/9y8Cs0nVs0FraRx7U0pHsuc"
#Define some simple functions
pbcheck(){
[[ $UPLOAD = "no" ]] && return
if [[ -z $PASTEBIN ]]; then
[[ $(ping -c1 www.alsa-project.org) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
else
[[ $(ping -c1 www.pastebin.ca) ]] || KEEP_FILES="yes" UPLOAD="no" PBERROR="yes"
fi
}
update() {
SHFILE=`mktemp -t alsa-info.XXXXXXXXXX` || exit 1
wget -O $SHFILE "http://www.alsa-project.org/alsa-info.sh" >/dev/null 2>&1
REMOTE_VERSION=`grep SCRIPT_VERSION $SHFILE |head -n1 |sed 's/.*=//'`
if [ "$REMOTE_VERSION" != "$SCRIPT_VERSION" ]; then
if [[ -n $DIALOG ]]
then
OVERWRITE=
if [ -w $0 ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to install it?\nNOTICE: The original file $0 will be overwritten!" 0 0
DIALOG_EXIT_CODE=$?
if [[ $DIALOG_EXIT_CODE = 0 ]]; then
OVERWRITE=yes
fi
fi
if [ -z "$OVERWRITE" ]; then
dialog --yesno "Newer version of ALSA-Info has been found\n\nDo you wish to download it?" 0 0
DIALOG_EXIT_CODE=$?
fi
if [[ $DIALOG_EXIT_CODE = 0 ]]
then
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ "$OVERWRITE" = "yes" ]; then
cp $SHFILE $0
echo "ALSA-Info script has been updated to v $REMOTE_VERSION"
echo "Please re-run the script"
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded as $SHFILE."
echo "Please re-run the script from new location."
fi
exit
else
rm $SHFILE 2>/dev/null
fi
else
echo "Newer version detected: $REMOTE_VERSION"
echo "To view the ChangeLog, please visit $CHANGELOG"
if [ -w $0 ]; then
echo "The original file $0 will be overwritten!"
echo -n "If you do not like to proceed, press Ctrl-C now.." ; read inp
cp $SHFILE $0
echo "ALSA-Info script has been updated. Please re-run it."
rm $SHFILE 2>/dev/null
else
echo "ALSA-Info script has been downloaded $SHFILE."
echo "Please, re-run it from new location."
fi
exit
fi
else
rm $SHFILE 2>/dev/null
fi
}
cleanup() {
if [ -n "$TEMPDIR" -a "$KEEP_FILES" != "yes" ]; then
rm -rf "$TEMPDIR" 2>/dev/null
fi
test -n "$KEEP_OUTPUT" || rm -f "$NFILE"
}
withaplay() {
echo "!!Aplay/Arecord output" >> $FILE
echo "!!--------------------" >> $FILE
echo "" >> $FILE
echo "APLAY" >> $FILE
echo "" >> $FILE
aplay -l >> $FILE 2>&1
echo "" >> $FILE
echo "ARECORD" >> $FILE
echo "" >> $FILE
arecord -l >> $FILE 2>&1
echo "" >> $FILE
}
withlsmod() {
echo "!!All Loaded Modules" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
lsmod |awk {'print $1'} >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withamixer() {
echo "!!Amixer output" >> $FILE
echo "!!-------------" >> $FILE
echo "" >> $FILE
for i in `grep "]: " /proc/asound/cards | awk -F ' ' '{ print $1} '` ; do
CARD_NAME=`grep "^ *$i " $TEMPDIR/alsacards.tmp|awk {'print $2'}`
echo "!!-------Mixer controls for card $i $CARD_NAME]" >> $FILE
echo "" >>$FILE
amixer -c$i info>> $FILE 2>&1
amixer -c$i>> $FILE 2>&1
echo "" >> $FILE
done
echo "" >> $FILE
}
withalsactl() {
echo "!!Alsactl output" >> $FILE
echo "!!--------------" >> $FILE
echo "" >> $FILE
exe=""
if [ -x /usr/sbin/alsactl ]; then
exe="/usr/sbin/alsactl"
fi
if [ -x /usr/local/sbin/alsactl ]; then
exe="/usr/local/sbin/alsactl"
fi
if [ -z "$exe" ]; then
exe=`whereis alsactl | cut -d ' ' -f 2`
fi
$exe -f $TEMPDIR/alsactl.tmp store
echo "--startcollapse--" >> $FILE
cat $TEMPDIR/alsactl.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withdevices() {
echo "!!ALSA Device nodes" >> $FILE
echo "!!-----------------" >> $FILE
echo "" >> $FILE
ls -la /dev/snd/* >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withconfigs() {
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]] || [[ -e $HOME/.asoundrc.asoundconf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!------------------------" >> $FILE
echo "" >> $FILE
#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file (~/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for .asoundrc.asoundconf (seems to be Ubuntu specific)
if [[ -e $HOME/.asoundrc.asoundconf ]]
then
echo "!!asoundconf-generated config file" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc.asoundconf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
}
withsysfs() {
local i f
local printed=""
for i in /sys/class/sound/*; do
case "$i" in
*/hwC?D?)
if [ -f $i/init_pin_configs ]; then
if [ -z "$printed" ]; then
echo "!!Sysfs Files" >> $FILE
echo "!!-----------" >> $FILE
echo "" >> $FILE
fi
for f in init_pin_configs driver_pin_configs user_pin_configs init_verbs hints; do
echo "$i/$f:" >> $FILE
cat $i/$f >> $FILE
echo >> $FILE
done
printed=yes
fi
;;
esac
done
if [ -n "$printed" ]; then
echo "" >> $FILE
fi
}
withdmesg() {
echo "!!ALSA/HDA dmesg" >> $FILE
echo "!!--------------" >> $FILE
echo "" >> $FILE
dmesg | grep -C1 -E 'ALSA|HDA|HDMI|snd[_-]|sound|hda.codec|hda.intel' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
}
withall() {
withdevices
withconfigs
withaplay
withamixer
withalsactl
withlsmod
withsysfs
withdmesg
}
get_alsa_library_version() {
ALSA_LIB_VERSION=`grep VERSION_STR /usr/include/alsa/version.h 2>/dev/null|awk {'print $3'}|sed 's/"//g'`
if [ -z "$ALSA_LIB_VERSION" ]; then
if [ -f /etc/lsb-release ]; then
. /etc/lsb-release
case "$DISTRIB_ID" in
Ubuntu)
if which dpkg > /dev/null ; then
ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
fi
if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_LIB_VERSION=""
fi
return
;;
*)
return
;;
esac
elif [ -f /etc/debian_version ]; then
if which dpkg > /dev/null ; then
ALSA_LIB_VERSION=`dpkg -l libasound2 | tail -1 | awk '{print $3}' | cut -f 1 -d -`
fi
if [ "$ALSA_LIB_VERSION" = "<none>" ]; then
ALSA_LIB_VERSION=""
fi
return
fi
fi
}
#Run checks to make sure the programs we need are installed.
LSPCI=$(which lspci 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
TPUT=$(which tput 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null);
DIALOG=$(which dialog 2>/dev/null | sed 's|^[^/]*||' 2>/dev/null);
#Check to see if sysfs is enabled in the kernel. We'll need this later on
SYSFS=$(mount |grep sysfs|awk {'print $3'});
#Check modprobe config files for sound related options
SNDOPTIONS=$(modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p')
KEEP_OUTPUT=
NFILE=""
PASTEBIN=""
WWWSERVICE="www.alsa-project.org"
WELCOME="yes"
PROCEED="yes"
UPLOAD="ask"
REPEAT=""
while [ -z "$REPEAT" ]; do
REPEAT="no"
case "$1" in
--update|--help|--about)
WELCOME="no"
PROCEED="no"
;;
--upload)
UPLOAD="yes"
WELCOME="no"
;;
--no-upload)
UPLOAD="no"
WELCOME="no"
;;
--pastebin)
PASTEBIN="yes"
WWWSERVICE="pastebin"
;;
--no-dialog)
DIALOG=""
REPEAT=""
shift
;;
--stdout)
DIALOG=""
UPLOAD="no"
WELCOME="no"
TOSTDOUT="yes"
;;
esac
done
#Script header output.
if [ "$WELCOME" = "yes" ]; then
greeting_message="\
This script visits the following commands/files to collect diagnostic
information about your ALSA installation and sound related hardware.
dmesg
lspci
lsmod
aplay
amixer
alsactl
/proc/asound/
/sys/class/sound/
~/.asoundrc (etc.)
See '$0 --help' for command line options.
"
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" \
--title "ALSA-Info script v $SCRIPT_VERSION" \
--msgbox "$greeting_message" 20 80
else
echo "ALSA Information Script v $SCRIPT_VERSION"
echo "--------------------------------"
echo "$greeting_message"
fi # dialog
fi # WELCOME
#Set the output file
TEMPDIR=`mktemp -t -d alsa-info.XXXXXXXXXX` || exit 1
FILE="$TEMPDIR/alsa-info.txt"
if [ -z "$NFILE" ]; then
NFILE=`mktemp -t alsa-info.txt.XXXXXXXXXX` || exit 1
fi
trap cleanup 0
if [ "$PROCEED" = "yes" ]; then
if [ -z "$LSPCI" ]; then
if [ -d /sys/bus/pci ]; then
echo "This script requires lspci. Please install it, and re-run this script."
exit 0
fi
fi
#Fetch the info and store in temp files/variables
DISTRO=`grep -ihs "buntu\|SUSE\|Fedora\|PCLinuxOS\|MEPIS\|Mandriva\|Debian\|Damn\|Sabayon\|Slackware\|KNOPPIX\|Gentoo\|Zenwalk\|Mint\|Kubuntu\|FreeBSD\|Puppy\|Freespire\|Vector\|Dreamlinux\|CentOS\|Arch\|Xandros\|Elive\|SLAX\|Red\|BSD\|KANOTIX\|Nexenta\|Foresight\|GeeXboX\|Frugalware\|64\|SystemRescue\|Novell\|Solaris\|BackTrack\|KateOS\|Pardus" /etc/{issue,*release,*version}`
KERNEL_VERSION=`uname -r`
KERNEL_PROCESSOR=`uname -p`
KERNEL_MACHINE=`uname -m`
KERNEL_OS=`uname -o`
[[ `uname -v | grep SMP` ]] && KERNEL_SMP="Yes" || KERNEL_SMP="No"
ALSA_DRIVER_VERSION=`cat /proc/asound/version |head -n1|awk {'print $7'} |sed 's/\.$//'`
get_alsa_library_version
ALSA_UTILS_VERSION=`amixer -v |awk {'print $3'}`
LAST_CARD=$((`grep "]: " /proc/asound/cards | wc -l` - 1 ))
ESDINST=$(which esd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
PAINST=$(which pulseaudio 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ARTSINST=$(which artsd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
JACKINST=$(which jackd 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
ROARINST=$(which roard 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
DMIDECODE=$(which dmidecode 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null)
#Check for DMI data
if [ -d /sys/class/dmi/id ]; then
# No root privileges are required when using sysfs method
DMI_SYSTEM_MANUFACTURER=$(cat /sys/class/dmi/id/sys_vendor 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$(cat /sys/class/dmi/id/product_name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$(cat /sys/class/dmi/id/product_version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$(cat /sys/class/dmi/id/bios_version 2>/dev/null)
elif [ -x $DMIDECODE ]; then
DMI_SYSTEM_MANUFACTURER=$($DMIDECODE -s system-manufacturer 2>/dev/null)
DMI_SYSTEM_PRODUCT_NAME=$($DMIDECODE -s system-product-name 2>/dev/null)
DMI_SYSTEM_PRODUCT_VERSION=$($DMIDECODE -s system-version 2>/dev/null)
DMI_SYSTEM_FIRMWARE_VERSION=$($DMIDECODE -s bios-version 2>/dev/null)
fi
cat /proc/asound/modules 2>/dev/null|awk {'print $2'}>$TEMPDIR/alsamodules.tmp
cat /proc/asound/cards >$TEMPDIR/alsacards.tmp
if [[ ! -z "$LSPCI" ]]; then
lspci |grep -i "multi\|audio">$TEMPDIR/lspci.tmp
fi
#Check for HDA-Intel cards codec#*
cat /proc/asound/card*/codec\#* > $TEMPDIR/alsa-hda-intel.tmp 2> /dev/null
#Check for AC97 cards codec
cat /proc/asound/card*/codec97\#0/ac97\#0-0 > $TEMPDIR/alsa-ac97.tmp 2> /dev/null
cat /proc/asound/card*/codec97\#0/ac97\#0-0+regs > $TEMPDIR/alsa-ac97-regs.tmp 2> /dev/null
#Check for USB mixer setup
cat /proc/asound/card*/usbmixer > $TEMPDIR/alsa-usbmixer.tmp 2> /dev/null
#Fetch the info, and put it in $FILE in a nice readable format.
if [[ -z $PASTEBIN ]]; then
echo "upload=true&script=true&cardinfo=" > $FILE
else
echo "name=$USER&type=33&description=/tmp/alsa-info.txt&expiry=&s=Submit+Post&content=" > $FILE
fi
echo "!!################################" >> $FILE
echo "!!ALSA Information Script v $SCRIPT_VERSION" >> $FILE
echo "!!################################" >> $FILE
echo "" >> $FILE
echo "!!Script ran on: `LANG=C TZ=UTC date`" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Linux Distribution" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo $DISTRO >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!DMI Information" >> $FILE
echo "!!---------------" >> $FILE
echo "" >> $FILE
echo "Manufacturer: $DMI_SYSTEM_MANUFACTURER" >> $FILE
echo "Product Name: $DMI_SYSTEM_PRODUCT_NAME" >> $FILE
echo "Product Version: $DMI_SYSTEM_PRODUCT_VERSION" >> $FILE
echo "Firmware Version: $DMI_SYSTEM_FIRMWARE_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Kernel Information" >> $FILE
echo "!!------------------" >> $FILE
echo "" >> $FILE
echo "Kernel release: $KERNEL_VERSION" >> $FILE
echo "Operating System: $KERNEL_OS" >> $FILE
echo "Architecture: $KERNEL_MACHINE" >> $FILE
echo "Processor: $KERNEL_PROCESSOR" >> $FILE
echo "SMP Enabled: $KERNEL_SMP" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!ALSA Version" >> $FILE
echo "!!------------" >> $FILE
echo "" >> $FILE
echo "Driver version: $ALSA_DRIVER_VERSION" >> $FILE
echo "Library version: $ALSA_LIB_VERSION" >> $FILE
echo "Utilities version: $ALSA_UTILS_VERSION" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Loaded ALSA modules" >> $FILE
echo "!!-------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsamodules.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Sound Servers on this system" >> $FILE
echo "!!----------------------------" >> $FILE
echo "" >> $FILE
if [[ -n $PAINST ]];then
[[ `pgrep '^(.*/)?pulseaudio$'` ]] && PARUNNING="Yes" || PARUNNING="No"
echo "Pulseaudio:" >> $FILE
echo " Installed - Yes ($PAINST)" >> $FILE
echo " Running - $PARUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ESDINST ]];then
[[ `pgrep '^(.*/)?esd$'` ]] && ESDRUNNING="Yes" || ESDRUNNING="No"
echo "ESound Daemon:" >> $FILE
echo " Installed - Yes ($ESDINST)" >> $FILE
echo " Running - $ESDRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ARTSINST ]];then
[[ `pgrep '^(.*/)?artsd$'` ]] && ARTSRUNNING="Yes" || ARTSRUNNING="No"
echo "aRts:" >> $FILE
echo " Installed - Yes ($ARTSINST)" >> $FILE
echo " Running - $ARTSRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $JACKINST ]];then
[[ `pgrep '^(.*/)?jackd$'` ]] && JACKRUNNING="Yes" || JACKRUNNING="No"
echo "Jack:" >> $FILE
echo " Installed - Yes ($JACKINST)" >> $FILE
echo " Running - $JACKRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -n $ROARINST ]];then
[[ `pgrep '^(.*/)?roard$'` ]] && ROARRUNNING="Yes" || ROARRUNNING="No"
echo "RoarAudio:" >> $FILE
echo " Installed - Yes ($ROARINST)" >> $FILE
echo " Running - $ROARRUNNING" >> $FILE
echo "" >> $FILE
fi
if [[ -z "$PAINST" && -z "$ESDINST" && -z "$ARTSINST" && -z "$JACKINST" && -z "$ROARINST" ]];then
echo "No sound servers found." >> $FILE
echo "" >> $FILE
fi
echo "" >> $FILE
echo "!!Soundcards recognised by ALSA" >> $FILE
echo "!!-----------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsacards.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
if [[ ! -z "$LSPCI" ]]; then
echo "!!PCI Soundcards installed in the system" >> $FILE
echo "!!--------------------------------------" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/lspci.tmp >> $FILE
echo "" >> $FILE
echo "" >> $FILE
echo "!!Advanced information - PCI Vendor/Device/Subsystem ID's" >> $FILE
echo "!!-------------------------------------------------------" >> $FILE
echo "" >> $FILE
lspci -vvn |grep -A1 040[1-3] >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ "$SNDOPTIONS" ]
then
echo "!!Modprobe options (Sound related)" >> $FILE
echo "!!--------------------------------" >> $FILE
echo "" >> $FILE
modprobe -c|sed -n 's/^options \(snd[-_][^ ]*\)/\1:/p' >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -d "$SYSFS" ]
then
echo "!!Loaded sound module options" >> $FILE
echo "!!---------------------------" >> $FILE
echo "" >> $FILE
for mod in `cat /proc/asound/modules|awk {'print $2'}`;do
echo "!!Module: $mod" >> $FILE
for params in `echo $SYSFS/module/$mod/parameters/*`; do
echo -ne "\t";
echo "$params : `cat $params`" | sed 's:.*/::';
done >> $FILE
echo "" >> $FILE
done
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-hda-intel.tmp" ]; then
echo "!!HDA-Intel Codec information" >> $FILE
echo "!!---------------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-hda-intel.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-ac97.tmp" ]; then
echo "!!AC97 Codec information" >> $FILE
echo "!!----------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97.tmp >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-ac97-regs.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
if [ -s "$TEMPDIR/alsa-usbmixer.tmp" ]; then
echo "!!USB Mixer information" >> $FILE
echo "!!---------------------" >> $FILE
echo "--startcollapse--" >> $FILE
echo "" >> $FILE
cat $TEMPDIR/alsa-usbmixer.tmp >> $FILE
echo "--endcollapse--" >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#If no command line options are specified, then run as though --with-all was specified
if [ -z "$1" ]; then
update
withall
pbcheck
fi
fi # proceed
#loop through command line arguments, until none are left.
if [ -n "$1" ]; then
until [ -z "$1" ]
do
case "$1" in
--pastebin)
update
withall
pbcheck
;;
--update)
update
exit
;;
--upload)
UPLOAD="yes"
withall
;;
--no-upload)
UPLOAD="no"
withall
;;
--output)
shift
NFILE="$1"
KEEP_OUTPUT="yes"
;;
--debug)
echo "Debugging enabled. $FILE and $TEMPDIR will not be deleted"
KEEP_FILES="yes"
echo ""
withall
;;
--with-all)
withall
;;
--with-aplay)
withaplay
;;
--with-amixer)
withamixer
;;
--with-alsactl)
withalsactl
;;
--with-devices)
withdevices
;;
--with-dmesg)
withdmesg
;;
--with-configs)
if [[ -e $HOME/.asoundrc ]] || [[ -e /etc/asound.conf ]]
then
echo "!!ALSA configuration files" >> $FILE
echo "!!------------------------" >> $FILE
echo "" >> $FILE
#Check for ~/.asoundrc
if [[ -e $HOME/.asoundrc ]]
then
echo "!!User specific config file ($HOME/.asoundrc)" >> $FILE
echo "" >> $FILE
cat $HOME/.asoundrc >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
#Check for /etc/asound.conf
if [[ -e /etc/asound.conf ]]
then
echo "!!System wide config file (/etc/asound.conf)" >> $FILE
echo "" >> $FILE
cat /etc/asound.conf >> $FILE
echo "" >> $FILE
echo "" >> $FILE
fi
fi
;;
--stdout)
UPLOAD="no"
withall
cat $FILE
rm $FILE
;;
--about)
echo "Written/Tested by the following users of #alsa on irc.freenode.net:"
echo ""
echo " wishie - Script author and developer / Testing"
echo " crimsun - Various script ideas / Testing"
echo " gnubien - Various script ideas / Testing"
echo " GrueMaster - HDA Intel specific items / Testing"
echo " olegfink - Script update function"
echo " TheMuso - display to stdout functionality"
exit 0
;;
*)
echo "alsa-info.sh version $SCRIPT_VERSION"
echo ""
echo "Available options:"
echo " --with-aplay (includes the output of aplay -l)"
echo " --with-amixer (includes the output of amixer)"
echo " --with-alsactl (includes the output of alsactl)"
echo " --with-configs (includes the output of ~/.asoundrc and"
echo " /etc/asound.conf if they exist)"
echo " --with-devices (shows the device nodes in /dev/snd/)"
echo " --with-dmesg (shows the ALSA/HDA kernel messages)"
echo ""
echo " --output FILE (specify the file to output for no-upload mode)"
echo " --update (check server for script updates)"
echo " --upload (upload contents to remote server)"
echo " --no-upload (do not upload contents to remote server)"
echo " --pastebin (use http://pastebin.ca) as remote server"
echo " instead www.alsa-project.org"
echo " --stdout (print alsa information to standard output"
echo " instead of a file)"
echo " --about (show some information about the script)"
echo " --debug (will run the script as normal, but will not"
echo " delete $FILE)"
exit 0
;;
esac
shift 1
done
fi
if [ "$PROCEED" = "no" ]; then
exit 1
fi
if [ "$UPLOAD" = "ask" ]; then
if [ -n "$DIALOG" ]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --yes-label " UPLOAD / SHARE " --no-label " SAVE LOCALLY " --defaultno --yesno "\n\nAutomatically upload ALSA information to $WWWSERVICE?" 10 80
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE != 0 ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
else
echo -n "Automatically upload ALSA information to $WWWSERVICE? [y/N] : "
read -e CONFIRM
if [ "$CONFIRM" != "y" ]; then
UPLOAD="no"
else
UPLOAD="yes"
fi
fi
fi
if [ "$UPLOAD" = "no" ]; then
if [ -z "$TOSTDOUT" ]; then
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
fi
if [[ -n $DIALOG ]]
then
if [[ -n $PBERROR ]]; then
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "An error occurred while contacting the $WWWSERVICE.\n Your information was NOT automatically uploaded.\n\nYour ALSA information is in $NFILE" 10 100
else
dialog --backtitle "$BGTITLE" --title "Information collected" --msgbox "\n\nYour ALSA information is in $NFILE" 10 60
fi
else
echo
if [[ -n $PBERROR ]]; then
echo "An error occurred while contacting the $WWWSERVICE."
echo "Your information was NOT automatically uploaded."
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
else
if [ -z "$TOSTDOUT" ]; then
echo ""
echo "Your ALSA information is in $NFILE"
echo ""
fi
fi
fi
exit
fi # UPLOAD
#Test that wget is installed, and supports --post-file. Upload $FILE if it does, and prompt user to upload file if it doesnt.
if
WGET=$(which wget 2>/dev/null| sed 's|^[^/]*||' 2>/dev/null); [[ -n "${WGET}" ]] && [[ -x "${WGET}" ]] && [[ `wget --help |grep post-file` ]]
then
if [[ -n $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://www.alsa-project.org/cardinfo-db/" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.alsa-project.org ..." 6 70 0
else
wget -O - --tries=5 --timeout=60 --post-file=$FILE "http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY&encrypt=t&encryptpw=blahblah" &>$TEMPDIR/wget.tmp || echo "Upload failed; exit"
{ for i in 10 20 30 40 50 60 70 80 90; do
echo $i
sleep 0.2
done
echo; } |dialog --backtitle "$BGTITLE" --guage "Uploading information to www.pastebin.ca ..." 6 70 0
fi
dialog --backtitle "$BGTITLE" --title "Information uploaded" --yesno "Would you like to see the uploaded information?" 5 100
DIALOG_EXIT_CODE=$?
if [ $DIALOG_EXIT_CODE = 0 ]; then
grep -v "alsa-info.txt" $FILE >$TEMPDIR/uploaded.txt
dialog --backtitle "$BGTITLE" --textbox $TEMPDIR/uploaded.txt 0 0
fi
clear
# no dialog
else
if [[ -z $PASTEBIN ]]; then
echo -n "Uploading information to www.alsa-project.org ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://www.alsa-project.org/cardinfo-db/ &>$TEMPDIR/wget.tmp &
else
echo -n "Uploading information to www.pastebin.ca ... "
wget -O - --tries=5 --timeout=60 --post-file=$FILE http://pastebin.ca/quiet-paste.php?api=$PASTEBINKEY &>$TEMPDIR/wget.tmp &
fi
#Progess spinner for wget transfer.
i=1
sp="/-\|"
echo -n ' '
while pgrep wget &>/dev/null
do
echo -en "\b${sp:i++%${#sp}:1}"
done
echo -e "\b Done!"
echo ""
fi #dialog
#See if tput is available, and use it if it is.
if [ -n "$TPUT" ]; then
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2 ; tput sgr0`
else
FINAL_URL=`tput setaf 1; grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p';tput sgr0`
fi
else
if [[ -z $PASTEBIN ]]; then
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | cut -d ' ' -f 2`
else
FINAL_URL=`grep "SUCCESS:" $TEMPDIR/wget.tmp | sed -n 's/.*\:\([0-9]\+\).*/http:\/\/pastebin.ca\/\1/p'`
fi
fi
# Output the URL of the uploaded file.
echo "Your ALSA information is located at $FINAL_URL"
echo "Please inform the person helping you."
echo ""
# We couldnt find a suitable wget, so tell the user to upload manually.
else
mv -f $FILE $NFILE || exit 1
KEEP_OUTPUT="yes"
if [[ -z $DIALOG ]]
then
if [[ -z $PASTEBIN ]]; then
echo ""
echo "Could not automatically upload output to http://www.alsa-project.org"
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://www.alsa-project.org/cardinfo-db/ and submit your post."
echo ""
else
echo ""
echo "Could not automatically upload output to http://www.pastebin.ca"
echo "Possible reasons are:"
echo " 1. Couldnt find 'wget' in your PATH"
echo " 2. Your version of wget is less than 1.8.2"
echo ""
echo "Please manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post."
echo ""
fi
else
if [[ -z $PASTEBIN ]]; then
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.alsa-project.org.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.alsa-project,org/cardinfo-db/ and submit your post." 25 100
else
dialog --backtitle "$BGTITLE" --msgbox "Could not automatically upload output to http://www.pastebin.ca.\nPossible reasons are:\n\n 1. Couldn't find 'wget' in your PATH\n 2. Your version of wget is less than 1.8.2\n\nPlease manually upload $NFILE to http://www.pastebin.ca/upload.php and submit your post." 25 100
fi
fi
fi
[-- Attachment #3: Type: text/plain, Size: 0 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: audio lost from speaker after reboot from windows on the device ALC295
2019-07-05 2:42 ` Kailang
(?)
@ 2019-07-05 3:50 ` He, Bo
-1 siblings, 0 replies; 7+ messages in thread
From: He, Bo @ 2019-07-05 3:50 UTC (permalink / raw)
To: Kailang, alsa-devel, linux-kernel
Cc: perex, tiwai, jian-hong, drake, chiu, hui.wang
[-- Attachment #1: Type: text/plain, Size: 3182 bytes --]
Hi, Kailiang:
Thanks for your tools, here are the two enclosed alsa-info with and without sound.
-----Original Message-----
From: Kailang <kailang@realtek.com>
Sent: Friday, July 5, 2019 10:42 AM
To: He, Bo <bo.he@intel.com>; alsa-devel@alsa-project.org; linux-kernel@vger.kernel.org
Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com; drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
Subject: RE: audio lost from speaker after reboot from windows on the device ALC295
Sorry!!
Forgot attach file.
> -----Original Message-----
> From: Kailang
> Sent: Friday, July 5, 2019 10:41 AM
> To: 'He, Bo' <bo.he@intel.com>; alsa-devel@alsa-project.org;
> linux-kernel@vger.kernel.org
> Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> Subject: RE: audio lost from speaker after reboot from windows on the
> device
> ALC295
>
> Hi Bo He,
>
> Could you help to dump info for us?
> Please use attach file to get results.
>
> ./alsa-info.sh --no-upload
>
> You will find dump file in folder /tmp/alsa-info.txt-????????.
>
> Please run one time in normal state and one time in fail state.
> Please send two result files to me.
>
> BR,
> Kailang
>
> > -----Original Message-----
> > From: He, Bo <bo.he@intel.com>
> > Sent: Thursday, July 4, 2019 8:02 PM
> > To: Kailang <kailang@realtek.com>; alsa-devel@alsa-project.org;
> > linux-kernel@vger.kernel.org
> > Cc: perex@perex.cz; tiwai@suse.com; jian-hong@endlessm.com;
> > drake@endlessm.com; chiu@endlessm.com; hui.wang@canonical.com
> > Subject: audio lost from speaker after reboot from windows on the
> > device
> > ALC295
> >
> > Hi, patch_realtek.c maintainer:
> > I see one issue that reboot from windows and boot to ubuntu, the
> > audio lost from speaker, I suspect there are some bugs in
> > patch_realtek.c drivers, the device is ALC295 and the device id is
> 0x10ec0295.
> >
> > I have done the below experiments:
> > 1. reboot from windows to windows, the audio is persist .
> > 2. reboot from windows to ubuntu, the audio lost from speaker, but
> > can hear if I hotplug one earphone.
> > 3. if the issue reproduce after reboot from windows, reboot the
> > ubuntu can't restore the audio, I suspect it's warm reset.
> > 4. if I write the port 0xcf9 with 0xe to do cold reset, the audio can restore.
> > 5. if I do suspend/resume, the audio can restore, I suspect do cold
> > boot and suspend will trigger the platform reset to reset the ALC295.
> > 6. if I do double function reset (write the verb 0x7ff in alc_init),
> > the audio is still can't restore.
> > snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_CODEC_RESET, 0); /*
> > Function reset */ snd_hda_codec_write(codec, 0x01, 0,
> > AC_VERB_SET_CODEC_RESET, 0); /* double Function reset */ 7. the
> > issue is first found on kernel 4.19.50, I still see the issue with
> > the latest kernel 5.2-rc2, is it possible windows change some
> > default registers, but ALC295 don't initialize the register?
> >
> > ------Please consider the environment before printing this e-mail.
[-- Attachment #2: alsa-info_without_sound.txt --]
[-- Type: text/plain, Size: 42987 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.63
!!################################
!!Script ran on: Fri Jul 5 11:36:08 UTC 2019
!!Linux Distribution
!!------------------
Ubuntu 19.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 19.04" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 19.04" HOME_URL="https://www.ubuntu.com/" SUPPORT_URL="https://help.ubuntu.com/" BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy" UBUNTU_CODENAME=disco
!!DMI Information
!!---------------
Manufacturer: HP
Product Name: HP Pavilion x360 Convertible 14-dh0xxx
Product Version: Type1ProductConfigId
Firmware Version: F.02
!!Kernel Information
!!------------------
Kernel release: 5.0.0-13-generic
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k5.0.0-13-generic
Library version: 1.1.8
Utilities version: 1.1.8
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xa1318000 irq 157
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:1f.3 0403: 8086:9dc8 (rev 30) (prog-if 80)
Subsystem: 103c:85c4
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2
snd_usb_audio: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
pm_blacklist : Y
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : -1
snoop : -1
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC295
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0295
Subsystem Id: 0x103c85c4
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x3c 0x3c]
Converter: stream=1, channel=0
PCM:
rates [0x60]: 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC295 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=1, channel=0
PCM:
rates [0x60]: 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x40]: 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x40]: 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC295 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x27 0x27]
Converter: stream=1, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0xb7a601c0: [Fixed] Mic at Oth Mobile-In
Conn = Digital, Color = Unknown
DefAssociation = 0xc, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x40000000: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x02* 0x03
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 3
0x02* 0x03 0x06
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x03a11040: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00013734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80 100
EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x02* 0x03
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40600001: [N/A] Modem Line at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=104
Coeff 0x00: 0x0002
Coeff 0x01: 0xaaaa
Coeff 0x02: 0x8aaa
Coeff 0x03: 0x0002
Coeff 0x04: 0xaa09
Coeff 0x05: 0x0700
Coeff 0x06: 0x6115
Coeff 0x07: 0x0200
Coeff 0x08: 0x6a0c
Coeff 0x09: 0xc003
Coeff 0x0a: 0x7779
Coeff 0x0b: 0x7774
Coeff 0x0c: 0x01ef
Coeff 0x0d: 0xa02f
Coeff 0x0e: 0x65c0
Coeff 0x0f: 0x0000
Coeff 0x10: 0x0020
Coeff 0x11: 0x0000
Coeff 0x12: 0x0000
Coeff 0x13: 0x0000
Coeff 0x14: 0x0000
Coeff 0x15: 0x0000
Coeff 0x16: 0x0000
Coeff 0x17: 0x0000
Coeff 0x18: 0x0000
Coeff 0x19: 0x0e11
Coeff 0x1a: 0x810b
Coeff 0x1b: 0x8a4b
Coeff 0x1c: 0x0000
Coeff 0x1d: 0x0000
Coeff 0x1e: 0x0000
Coeff 0x1f: 0x0000
Coeff 0x20: 0x1000
Coeff 0x21: 0x0000
Coeff 0x22: 0x0000
Coeff 0x23: 0x8804
Coeff 0x24: 0x0000
Coeff 0x25: 0x0000
Coeff 0x26: 0x0000
Coeff 0x27: 0x0000
Coeff 0x28: 0x0000
Coeff 0x29: 0x3000
Coeff 0x2a: 0x0000
Coeff 0x2b: 0x0000
Coeff 0x2c: 0x0f00
Coeff 0x2d: 0x1f4f
Coeff 0x2e: 0x2902
Coeff 0x2f: 0xef57
Coeff 0x30: 0x9007
Coeff 0x31: 0xd2c0
Coeff 0x32: 0x54a8
Coeff 0x33: 0x8400
Coeff 0x34: 0xa30d
Coeff 0x35: 0x8daa
Coeff 0x36: 0x77d7
Coeff 0x37: 0xfe15
Coeff 0x38: 0xd909
Coeff 0x39: 0x110a
Coeff 0x3a: 0x0010
Coeff 0x3b: 0x60d9
Coeff 0x3c: 0xf214
Coeff 0x3d: 0xc2ba
Coeff 0x3e: 0xa928
Coeff 0x3f: 0x0001
Coeff 0x40: 0x8800
Coeff 0x41: 0x0000
Coeff 0x42: 0x2000
Coeff 0x43: 0x3d90
Coeff 0x44: 0x4900
Coeff 0x45: 0x5089
Coeff 0x46: 0x0004
Coeff 0x47: 0xa47a
Coeff 0x48: 0xd049
Coeff 0x49: 0x0049
Coeff 0x4a: 0x2010
Coeff 0x4b: 0x0000
Coeff 0x4c: 0x065c
Coeff 0x4d: 0x7fff
Coeff 0x4e: 0x7fff
Coeff 0x4f: 0x0000
Coeff 0x50: 0x0000
Coeff 0x51: 0x6363
Coeff 0x52: 0x0100
Coeff 0x53: 0x3320
Coeff 0x54: 0xcc00
Coeff 0x55: 0x0000
Coeff 0x56: 0x3f00
Coeff 0x57: 0x0000
Coeff 0x58: 0x0000
Coeff 0x59: 0x0000
Coeff 0x5a: 0x1300
Coeff 0x5b: 0x0777
Coeff 0x5c: 0x0000
Coeff 0x5d: 0x6000
Coeff 0x5e: 0x4000
Coeff 0x5f: 0x6200
Coeff 0x60: 0x00af
Coeff 0x61: 0x13a8
Coeff 0x62: 0x0000
Coeff 0x63: 0x8020
Coeff 0x64: 0x0000
Coeff 0x65: 0x0000
Coeff 0x66: 0x0000
Coeff 0x67: 0x3200
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x03211020: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x02 0x03*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x19 0x1a 0x1b 0x1d 0x13
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00]
Connection: 5
0x19 0x1a 0x1b 0x1d 0x12
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x12* 0x13 0x18
Codec: Intel Kabylake HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x8086280b
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 11 Jul 5 11:35 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 9 Jul 5 11:35 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 10 Jul 5 11:35 /dev/snd/hwC0D2
crw-rw----+ 1 root audio 116, 3 Jul 5 11:35 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 2 Jul 5 11:35 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Jul 5 11:35 /dev/snd/pcmC0D10p
crw-rw----+ 1 root audio 116, 4 Jul 5 11:35 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 5 Jul 5 11:35 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116, 6 Jul 5 11:35 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116, 7 Jul 5 11:35 /dev/snd/pcmC0D9p
crw-rw----+ 1 root audio 116, 1 Jul 5 11:35 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Jul 5 11:35 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Jul 5 11:34 .
drwxr-xr-x 3 root root 300 Jul 5 11:34 ..
lrwxrwxrwx 1 root root 12 Jul 5 11:35 pci-0000:00:1f.3 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC295 Analog [ALC295 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC295 Analog [ALC295 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xa1318000 irq 157'
Mixer name : 'Realtek ALC295'
Components : 'HDA:10ec0295,103c85c4,00100002 HDA:8086280b,80860101,00100000'
Controls : 53
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 60 [69%] [-20.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',3
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',4
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 39 [62%] [12.00dB] [on]
Front Right: Capture 39 [62%] [12.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Capture Volume'
value.0 39
value.1 39
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 1200
dbvalue.1 1200
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.9 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.10 {
iface MIXER
name 'Master Playback Volume'
value 60
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -2025
}
}
control.11 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.16 {
iface PCM
name 'Playback Channel Map'
value.0 3
value.1 4
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.17 {
iface PCM
name 'Capture Channel Map'
value.0 3
value.1 4
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.18 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.19 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.20 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.21 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.22 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.23 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.24 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.26 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.27 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.28 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.29 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.30 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.31 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.32 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.33 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.34 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.35 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.36 {
iface CARD
name 'HDMI/DP,pcm=9 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.37 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 3
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.38 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 3
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.39 {
iface MIXER
name 'IEC958 Playback Default'
index 3
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.40 {
iface MIXER
name 'IEC958 Playback Switch'
index 3
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.41 {
iface PCM
device 9
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.42 {
iface CARD
name 'HDMI/DP,pcm=10 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.43 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 4
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.44 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 4
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.45 {
iface MIXER
name 'IEC958 Playback Default'
index 4
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.46 {
iface MIXER
name 'IEC958 Playback Switch'
index 4
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.47 {
iface PCM
device 10
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.48 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.49 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.50 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.51 {
iface PCM
device 9
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.52 {
iface PCM
device 10
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.53 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
rfcomm
cmac
bnep
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
snd_hda_codec_hdmi
snd_soc_skl
snd_soc_hdac_hda
snd_hda_ext_core
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_soc_sst_dsp
snd_soc_acpi_intel_match
snd_hda_codec_realtek
snd_soc_acpi
crct10dif_pclmul
snd_hda_codec_generic
snd_soc_core
crc32_pclmul
ledtrig_audio
ghash_clmulni_intel
snd_compress
ac97_bus
snd_pcm_dmaengine
snd_hda_intel
joydev
snd_hda_codec
snd_hda_core
aesni_intel
snd_hwdep
btusb
uvcvideo
snd_pcm
btrtl
videobuf2_vmalloc
btbcm
videobuf2_memops
videobuf2_v4l2
btintel
aes_x86_64
bluetooth
snd_seq_midi
crypto_simd
cryptd
asix
snd_seq_midi_event
glue_helper
videobuf2_common
hid_sensor_rotation
hid_sensor_incl_3d
hid_sensor_accel_3d
hid_sensor_magn_3d
videodev
snd_rawmidi
intel_cstate
hid_sensor_gyro_3d
snd_seq
usbnet
hid_sensor_trigger
snd_seq_device
media
ecdh_generic
mii
intel_rapl_perf
input_leds
wmi_bmof
industrialio_triggered_buffer
snd_timer
kfifo_buf
serio_raw
hp_wmi
hid_sensor_iio_common
hid_multitouch
intel_wmi_thunderbolt
industrialio
snd
idma64
soundcore
virt_dma
mei_me
mei
hp_accel
lis3lv02d
int3403_thermal
processor_thermal_device
soc_button_array
int3400_thermal
intel_soc_dts_iosf
int340x_thermal_zone
intel_pch_thermal
input_polldev
acpi_thermal_rel
intel_hid
hp_wireless
sparse_keymap
mac_hid
acpi_pad
sch_fq_codel
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
overlay
nls_iso8859_1
dm_mirror
dm_region_hash
dm_log
usbhid
uas
usb_storage
hid_sensor_custom
hid_sensor_hub
intel_ishtp_hid
i915
kvmgt
vfio_mdev
mdev
vfio_iommu_type1
hid_generic
vfio
kvm
irqbypass
i2c_algo_bit
drm_kms_helper
syscopyarea
sysfillrect
sysimgblt
nvme
fb_sys_fops
i2c_i801
sdhci_pci
drm
nvme_core
ahci
cqhci
intel_lpss_pci
intel_ish_ipc
libahci
sdhci
intel_lpss
i2c_hid
intel_ishtp
hid
wmi
pinctrl_cannonlake
video
pinctrl_intel
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0xb7a601c0
0x13 0x40000000
0x14 0x90170110
0x16 0x411111f0
0x17 0x411111f0
0x18 0x411111f0
0x19 0x03a11040
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40600001
0x1e 0x411111f0
0x21 0x03211020
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D2/init_pin_configs:
0x05 0x18560010
0x06 0x18560010
0x07 0x18560010
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
/sys/class/sound/hwC0D2/hints:
!!ALSA/HDA dmesg
!!--------------
[ 0.167076] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.167076] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.167076] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[ 29.325761] hid-multitouch 0018:04F3:23E3.0002: input,hidraw1: I2C HID v1.00 Device [ELAN2514:00 04F3:23E3] on i2c-ELAN2514:00
[ 29.347715] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 29.347938] snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
[ 29.347978] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 29.418939] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 29.418942] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 29.418944] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 29.418946] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 29.418947] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 29.418949] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 29.418951] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 29.453921] asix 1-2.1:1.0 eth0: register 'asix' at usb-0000:00:14.0-2.1, ASIX AX88772 USB 2.0 Ethernet, 00:10:60:b1:db:ff
[ 29.454025] usbcore: registered new interface driver asix
[ 29.493554] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 29.493645] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 29.493960] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 29.494056] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 29.494152] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[ 29.494236] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
[ 29.494554] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36
[ 29.622555] intel_rapl: Found RAPL domain package
[-- Attachment #3: also-info_with_sound.txt --]
[-- Type: text/plain, Size: 42836 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.63
!!################################
!!Script ran on: Fri Jul 5 11:30:40 UTC 2019
!!Linux Distribution
!!------------------
Ubuntu 19.04 \n \l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 19.04" NAME="Ubuntu" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 19.04" HOME_URL="https://www.ubuntu.com/" SUPPORT_URL="https://help.ubuntu.com/" BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/" PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy" UBUNTU_CODENAME=disco
!!DMI Information
!!---------------
Manufacturer: HP
Product Name: HP Pavilion x360 Convertible 14-dh0xxx
Product Version: Type1ProductConfigId
Firmware Version: F.02
!!Kernel Information
!!------------------
Kernel release: 5.0.0-13-generic
Operating System: GNU/Linux
Architecture: x86_64
Processor: x86_64
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k5.0.0-13-generic
Library version: 1.1.8
Utilities version: 1.1.8
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/bin/pulseaudio)
Running - Yes
!!Soundcards recognised by ALSA
!!-----------------------------
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xa1318000 irq 157
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1f.3 Audio device: Intel Corporation Device 9dc8 (rev 30)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:1f.3 0403: 8086:9dc8 (rev 30) (prog-if 80)
Subsystem: 103c:85c4
!!Modprobe options (Sound related)
!!--------------------------------
snd_pcsp: index=-2
snd_usb_audio: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_atiixp_modem: index=-2
snd_intel8x0m: index=-2
snd_via82xx_modem: index=-2
snd_usb_audio: index=-2
snd_usb_caiaq: index=-2
snd_usb_ua101: index=-2
snd_usb_us122l: index=-2
snd_usb_usx2y: index=-2
snd_cmipci: mpu_port=0x330 fm_port=0x388
snd_pcsp: index=-2
snd_usb_audio: index=-2
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
pm_blacklist : Y
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : -1
snoop : -1
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Realtek ALC295
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0295
Subsystem Id: 0x103c85c4
Revision Id: 0x100002
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x3c 0x3c]
Converter: stream=1, channel=0
PCM:
rates [0x60]: 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC295 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=1, channel=0
PCM:
rates [0x60]: 44100 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x411: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x40]: 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x40]: 48000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC295 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x27 0x27]
Converter: stream=1, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Internal Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0xb7a601c0: [Fixed] Mic at Oth Mobile-In
Conn = Digital, Color = Unknown
DefAssociation = 0xc, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x40000000: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x0
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x02
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x02* 0x03
Node 0x17 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 3
0x02* 0x03 0x06
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000024: IN Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x03a11040: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00013734: IN OUT EAPD Detect
Vref caps: HIZ 50 GRD 80 100
EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x02* 0x03
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40600001: [N/A] Modem Line at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=104
Coeff 0x00: 0x0002
Coeff 0x01: 0xaaaa
Coeff 0x02: 0x8aaa
Coeff 0x03: 0x0002
Coeff 0x04: 0xaa09
Coeff 0x05: 0x0700
Coeff 0x06: 0x6115
Coeff 0x07: 0x0200
Coeff 0x08: 0x6a8c
Coeff 0x09: 0xc003
Coeff 0x0a: 0x7779
Coeff 0x0b: 0x7770
Coeff 0x0c: 0x01ef
Coeff 0x0d: 0xa023
Coeff 0x0e: 0x65c0
Coeff 0x0f: 0x0000
Coeff 0x10: 0x0020
Coeff 0x11: 0x0000
Coeff 0x12: 0x0000
Coeff 0x13: 0x0000
Coeff 0x14: 0x0000
Coeff 0x15: 0x0000
Coeff 0x16: 0x0000
Coeff 0x17: 0x0000
Coeff 0x18: 0x0000
Coeff 0x19: 0x0e11
Coeff 0x1a: 0x810b
Coeff 0x1b: 0x8a4b
Coeff 0x1c: 0x0000
Coeff 0x1d: 0x0000
Coeff 0x1e: 0x0000
Coeff 0x1f: 0x0000
Coeff 0x20: 0x1000
Coeff 0x21: 0x0000
Coeff 0x22: 0x0000
Coeff 0x23: 0x8804
Coeff 0x24: 0x0000
Coeff 0x25: 0x0000
Coeff 0x26: 0x0000
Coeff 0x27: 0x0000
Coeff 0x28: 0x0000
Coeff 0x29: 0x3000
Coeff 0x2a: 0x0000
Coeff 0x2b: 0x0000
Coeff 0x2c: 0x0f00
Coeff 0x2d: 0x1f4f
Coeff 0x2e: 0x2902
Coeff 0x2f: 0xef57
Coeff 0x30: 0x9007
Coeff 0x31: 0xd200
Coeff 0x32: 0x54a8
Coeff 0x33: 0x8400
Coeff 0x34: 0xa30d
Coeff 0x35: 0x8daa
Coeff 0x36: 0x77d7
Coeff 0x37: 0xfe05
Coeff 0x38: 0xd909
Coeff 0x39: 0x110a
Coeff 0x3a: 0x0010
Coeff 0x3b: 0x60d9
Coeff 0x3c: 0xf214
Coeff 0x3d: 0xc2ba
Coeff 0x3e: 0xa928
Coeff 0x3f: 0x0001
Coeff 0x40: 0x8800
Coeff 0x41: 0x0000
Coeff 0x42: 0x2000
Coeff 0x43: 0x3d90
Coeff 0x44: 0x4900
Coeff 0x45: 0x5089
Coeff 0x46: 0x0004
Coeff 0x47: 0xa47a
Coeff 0x48: 0xd049
Coeff 0x49: 0x0049
Coeff 0x4a: 0x2010
Coeff 0x4b: 0x0000
Coeff 0x4c: 0x065c
Coeff 0x4d: 0x7fff
Coeff 0x4e: 0x7fff
Coeff 0x4f: 0x0000
Coeff 0x50: 0x0000
Coeff 0x51: 0x6f6f
Coeff 0x52: 0x0100
Coeff 0x53: 0x3320
Coeff 0x54: 0xcc00
Coeff 0x55: 0x0000
Coeff 0x56: 0x3f00
Coeff 0x57: 0x0000
Coeff 0x58: 0x0000
Coeff 0x59: 0x0000
Coeff 0x5a: 0x1300
Coeff 0x5b: 0x0777
Coeff 0x5c: 0x0000
Coeff 0x5d: 0x6000
Coeff 0x5e: 0x4000
Coeff 0x5f: 0x6200
Coeff 0x60: 0x00af
Coeff 0x61: 0x13a8
Coeff 0x62: 0x0000
Coeff 0x63: 0x8020
Coeff 0x64: 0x0000
Coeff 0x65: 0x0000
Coeff 0x66: 0x0000
Coeff 0x67: 0x3200
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x03211020: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x02 0x03*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x19 0x1a 0x1b 0x1d 0x13
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x00 0x00]
Connection: 5
0x19 0x1a 0x1b 0x1d 0x12
Node 0x24 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x12* 0x13 0x18
Codec: Intel Kabylake HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x8086280b
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1a]: 16 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 11 Jul 5 11:26 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 9 Jul 5 11:26 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 10 Jul 5 11:26 /dev/snd/hwC0D2
crw-rw----+ 1 root audio 116, 3 Jul 5 11:26 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 2 Jul 5 11:26 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Jul 5 11:26 /dev/snd/pcmC0D10p
crw-rw----+ 1 root audio 116, 4 Jul 5 11:26 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 5 Jul 5 11:26 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116, 6 Jul 5 11:26 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116, 7 Jul 5 11:26 /dev/snd/pcmC0D9p
crw-rw----+ 1 root audio 116, 1 Jul 5 11:26 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Jul 5 11:26 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Jul 5 11:25 .
drwxr-xr-x 3 root root 300 Jul 5 11:25 ..
lrwxrwxrwx 1 root root 12 Jul 5 11:26 pci-0000:00:1f.3 -> ../controlC0
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC295 Analog [ALC295 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC295 Analog [ALC295 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [PCH]
Card hw:0 'PCH'/'HDA Intel PCH at 0xa1318000 irq 157'
Mixer name : 'Realtek ALC295'
Components : 'HDA:10ec0295,103c85c4,00100002 HDA:8086280b,80860101,00100000'
Controls : 53
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 60 [69%] [-20.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',3
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',4
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 39 [62%] [12.00dB] [on]
Front Right: Capture 39 [62%] [12.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
!!Alsactl output
!!--------------
--startcollapse--
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Capture Volume'
value.0 39
value.1 39
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 1200
dbvalue.1 1200
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.9 {
iface MIXER
name 'Internal Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3000
dbvalue.0 0
dbvalue.1 0
}
}
control.10 {
iface MIXER
name 'Master Playback Volume'
value 60
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -2025
}
}
control.11 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Internal Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.15 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.16 {
iface PCM
name 'Playback Channel Map'
value.0 3
value.1 4
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.17 {
iface PCM
name 'Capture Channel Map'
value.0 3
value.1 4
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.18 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.19 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.20 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.21 {
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.22 {
iface MIXER
name 'IEC958 Playback Switch'
value false
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.23 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.24 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.25 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.26 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.27 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.28 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.29 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.30 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.31 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.32 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.33 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.34 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.35 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.36 {
iface CARD
name 'HDMI/DP,pcm=9 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.37 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 3
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.38 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 3
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.39 {
iface MIXER
name 'IEC958 Playback Default'
index 3
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.40 {
iface MIXER
name 'IEC958 Playback Switch'
index 3
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.41 {
iface PCM
device 9
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.42 {
iface CARD
name 'HDMI/DP,pcm=10 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.43 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 4
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.44 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 4
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.45 {
iface MIXER
name 'IEC958 Playback Default'
index 4
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.46 {
iface MIXER
name 'IEC958 Playback Switch'
index 4
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.47 {
iface PCM
device 10
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.48 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.49 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.50 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.51 {
iface PCM
device 9
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.52 {
iface PCM
device 10
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.53 {
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
rfcomm
cmac
bnep
snd_soc_skl
snd_soc_hdac_hda
snd_hda_ext_core
snd_soc_skl_ipc
snd_soc_sst_ipc
snd_hda_codec_hdmi
snd_soc_sst_dsp
snd_soc_acpi_intel_match
snd_soc_acpi
intel_rapl
snd_soc_core
snd_hda_codec_realtek
x86_pkg_temp_thermal
snd_hda_codec_generic
ledtrig_audio
snd_compress
ac97_bus
intel_powerclamp
coretemp
snd_pcm_dmaengine
snd_hda_intel
snd_hda_codec
kvm_intel
snd_hda_core
snd_hwdep
snd_pcm
crct10dif_pclmul
crc32_pclmul
snd_seq_midi
snd_seq_midi_event
ghash_clmulni_intel
uvcvideo
snd_rawmidi
joydev
btusb
btrtl
snd_seq
videobuf2_vmalloc
videobuf2_memops
btbcm
videobuf2_v4l2
btintel
bluetooth
aesni_intel
videobuf2_common
snd_seq_device
asix
snd_timer
videodev
aes_x86_64
usbnet
crypto_simd
cryptd
snd
mii
media
glue_helper
soundcore
intel_cstate
ecdh_generic
intel_rapl_perf
hid_sensor_gyro_3d
input_leds
hid_sensor_accel_3d
hid_sensor_magn_3d
wmi_bmof
hid_sensor_incl_3d
hid_sensor_rotation
intel_wmi_thunderbolt
serio_raw
hp_wmi
hid_sensor_trigger
industrialio_triggered_buffer
kfifo_buf
idma64
hid_multitouch
hid_sensor_iio_common
virt_dma
industrialio
mei_me
processor_thermal_device
hp_accel
soc_button_array
intel_soc_dts_iosf
mei
lis3lv02d
input_polldev
intel_pch_thermal
int3403_thermal
int340x_thermal_zone
hp_wireless
int3400_thermal
intel_hid
acpi_thermal_rel
sparse_keymap
acpi_pad
mac_hid
sch_fq_codel
parport_pc
ppdev
lp
parport
ip_tables
x_tables
autofs4
overlay
usbhid
nls_iso8859_1
dm_mirror
dm_region_hash
dm_log
hid_sensor_custom
hid_sensor_hub
intel_ishtp_hid
hid_generic
uas
usb_storage
i915
kvmgt
vfio_mdev
mdev
vfio_iommu_type1
vfio
kvm
irqbypass
i2c_algo_bit
drm_kms_helper
nvme
syscopyarea
sysfillrect
sysimgblt
intel_ish_ipc
fb_sys_fops
ahci
sdhci_pci
intel_ishtp
drm
i2c_i801
nvme_core
libahci
cqhci
intel_lpss_pci
sdhci
intel_lpss
i2c_hid
hid
wmi
pinctrl_cannonlake
video
pinctrl_intel
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0xb7a601c0
0x13 0x40000000
0x14 0x90170110
0x16 0x411111f0
0x17 0x411111f0
0x18 0x411111f0
0x19 0x03a11040
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40600001
0x1e 0x411111f0
0x21 0x03211020
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC0D2/init_pin_configs:
0x05 0x18560010
0x06 0x18560010
0x07 0x18560010
/sys/class/sound/hwC0D2/driver_pin_configs:
/sys/class/sound/hwC0D2/user_pin_configs:
/sys/class/sound/hwC0D2/init_verbs:
/sys/class/sound/hwC0D2/hints:
!!ALSA/HDA dmesg
!!--------------
[ 0.165533] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.165533] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.165533] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
--
[ 19.896354] usbcore: registered new interface driver asix
[ 19.960401] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 19.960681] snd_hda_intel 0000:00:1f.3: Linked as a consumer to 0000:00:02.0
[ 19.960732] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 20.023930] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC295: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 20.023933] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.023935] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 20.023936] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 20.023936] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 20.023937] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 20.023939] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 20.044521] intel_rapl: Found RAPL domain package
--
[ 20.044525] intel_rapl: Found RAPL domain dram
[ 20.091534] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input30
[ 20.091628] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input31
[ 20.091698] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input32
[ 20.091761] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input33
[ 20.091817] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input34
[ 20.091875] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input35
[ 20.091938] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input36
[ 20.163066] hp_wmi: query 0xd returned error 0x5
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-07-05 3:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-04 12:02 audio lost from speaker after reboot from windows on the device ALC295 He, Bo
2019-07-04 23:27 ` Hui Wang
2019-07-05 2:41 ` Kailang
2019-07-05 2:41 ` Kailang
2019-07-05 2:42 ` Kailang
2019-07-05 2:42 ` Kailang
2019-07-05 3:50 ` He, Bo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.