All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] FlexRM support in VFIO platform
@ 2017-07-20 11:17 ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel @ 2017-07-20 11:17 UTC (permalink / raw)
  To: Will Deacon, Robin Murphy, Joerg Roedel, Baptiste Reynal,
	Alex Williamson
  Cc: Scott Branden, linux-kernel, linux-arm-kernel, iommu, kvm,
	bcm-kernel-feedback-list, Anup Patel

This patchset primarily adds Broadcom FlexRM reset module for
VFIO platform driver.

The patches are based on Linux-4.13-rc1 and can also be
found at flexrm-vfio-v3 branch of
https://github.com/Broadcom/arm64-linux.git

Changes since v2:
 - Remove PATCH1 because fixing VFIO no-IOMMU mode is
   a separate topic

Changes since v1:
 - Remove iommu_present() check in vfio_iommu_group_get()
 - Drop PATCH1-to-PATCH3 because IOMMU_CAP_BYPASS is not
   required
 - Move additional comments out of license header in
   vfio_platform_bcmflexrm.c

Anup Patel (1):
  vfio: platform: reset: Add Broadcom FlexRM reset module

 drivers/vfio/platform/reset/Kconfig                |  9 +++
 drivers/vfio/platform/reset/Makefile               |  1 +
 .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c

-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v3] FlexRM support in VFIO platform
@ 2017-07-20 11:17 ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel via iommu @ 2017-07-20 11:17 UTC (permalink / raw)
  To: Will Deacon, Robin Murphy, Joerg Roedel, Baptiste Reynal,
	Alex Williamson
  Cc: kvm-u79uwXL29TY76Z2rM5mHXA, Scott Branden,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA,
	bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

This patchset primarily adds Broadcom FlexRM reset module for
VFIO platform driver.

The patches are based on Linux-4.13-rc1 and can also be
found at flexrm-vfio-v3 branch of
https://github.com/Broadcom/arm64-linux.git

Changes since v2:
 - Remove PATCH1 because fixing VFIO no-IOMMU mode is
   a separate topic

Changes since v1:
 - Remove iommu_present() check in vfio_iommu_group_get()
 - Drop PATCH1-to-PATCH3 because IOMMU_CAP_BYPASS is not
   required
 - Move additional comments out of license header in
   vfio_platform_bcmflexrm.c

Anup Patel (1):
  vfio: platform: reset: Add Broadcom FlexRM reset module

 drivers/vfio/platform/reset/Kconfig                |  9 +++
 drivers/vfio/platform/reset/Makefile               |  1 +
 .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c

-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v3] FlexRM support in VFIO platform
@ 2017-07-20 11:17 ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel @ 2017-07-20 11:17 UTC (permalink / raw)
  To: linux-arm-kernel

This patchset primarily adds Broadcom FlexRM reset module for
VFIO platform driver.

The patches are based on Linux-4.13-rc1 and can also be
found at flexrm-vfio-v3 branch of
https://github.com/Broadcom/arm64-linux.git

Changes since v2:
 - Remove PATCH1 because fixing VFIO no-IOMMU mode is
   a separate topic

Changes since v1:
 - Remove iommu_present() check in vfio_iommu_group_get()
 - Drop PATCH1-to-PATCH3 because IOMMU_CAP_BYPASS is not
   required
 - Move additional comments out of license header in
   vfio_platform_bcmflexrm.c

Anup Patel (1):
  vfio: platform: reset: Add Broadcom FlexRM reset module

 drivers/vfio/platform/reset/Kconfig                |  9 +++
 drivers/vfio/platform/reset/Makefile               |  1 +
 .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c

-- 
2.7.4

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-20 11:17   ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel @ 2017-07-20 11:17 UTC (permalink / raw)
  To: Will Deacon, Robin Murphy, Joerg Roedel, Baptiste Reynal,
	Alex Williamson
  Cc: Scott Branden, linux-kernel, linux-arm-kernel, iommu, kvm,
	bcm-kernel-feedback-list, Anup Patel

This patch adds Broadcom FlexRM low-level reset for
VFIO platform.

It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring

The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Oza Oza <oza.oza@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 drivers/vfio/platform/reset/Kconfig                |  9 +++
 drivers/vfio/platform/reset/Makefile               |  1 +
 .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c

diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 70cccc5..8d8d226 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
 	  Enables the VFIO platform driver to handle reset for AMD XGBE
 
 	  If you don't know what to do here, say N.
+
+config VFIO_PLATFORM_BCMFLEXRM_RESET
+	tristate "VFIO support for Broadcom FlexRM reset"
+	depends on VFIO_PLATFORM
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Enables the VFIO platform driver to handle reset for Broadcom FlexRM
+
+	  If you don't know what to do here, say N.
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
index 93f4e23..8d9874b 100644
--- a/drivers/vfio/platform/reset/Makefile
+++ b/drivers/vfio/platform/reset/Makefile
@@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
 
 obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
 obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
+obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
new file mode 100644
index 0000000..a198196
--- /dev/null
+++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver provides reset support for Broadcom FlexRM ring manager
+ * to VFIO platform.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "vfio_platform_private.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE					0x10000
+#define RING_VER_MAGIC					0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER					0x000
+#define RING_CONTROL					0x034
+#define RING_FLUSH_DONE					0x038
+
+/* Register RING_CONTROL fields */
+#define CONTROL_FLUSH_SHIFT				5
+#define CONTROL_ACTIVE_SHIFT				4
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK					0x1
+
+static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
+{
+	unsigned int timeout;
+
+	/* Disable/inactivate ring */
+	writel_relaxed(0x0, ring + RING_CONTROL);
+
+	/* Flush ring with timeout of 1s */
+	timeout = 1000;
+	writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
+	do {
+		if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
+			break;
+		mdelay(1);
+	} while (timeout--);
+
+	if (!timeout)
+		pr_warn("VFIO FlexRM shutdown timedout\n");
+}
+
+static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
+{
+	void __iomem *ring;
+	struct vfio_platform_region *reg = &vdev->regions[0];
+
+	/* Map FlexRM ring registers if not mapped */
+	if (!reg->ioaddr) {
+		reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
+		if (!reg->ioaddr)
+			return -ENOMEM;
+	}
+
+	/* Discover and shutdown each FlexRM ring */
+	for (ring = reg->ioaddr;
+	     ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
+		if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
+			vfio_platform_bcmflexrm_shutdown(ring);
+	}
+
+	return 0;
+}
+
+module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
+			  vfio_platform_bcmflexrm_reset);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
+MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-20 11:17   ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel via iommu @ 2017-07-20 11:17 UTC (permalink / raw)
  To: Will Deacon, Robin Murphy, Joerg Roedel, Baptiste Reynal,
	Alex Williamson
  Cc: kvm-u79uwXL29TY76Z2rM5mHXA, Scott Branden,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA,
	bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

This patch adds Broadcom FlexRM low-level reset for
VFIO platform.

It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring

The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.

Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Oza Oza <oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
 drivers/vfio/platform/reset/Kconfig                |  9 +++
 drivers/vfio/platform/reset/Makefile               |  1 +
 .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c

diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 70cccc5..8d8d226 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
 	  Enables the VFIO platform driver to handle reset for AMD XGBE
 
 	  If you don't know what to do here, say N.
+
+config VFIO_PLATFORM_BCMFLEXRM_RESET
+	tristate "VFIO support for Broadcom FlexRM reset"
+	depends on VFIO_PLATFORM
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Enables the VFIO platform driver to handle reset for Broadcom FlexRM
+
+	  If you don't know what to do here, say N.
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
index 93f4e23..8d9874b 100644
--- a/drivers/vfio/platform/reset/Makefile
+++ b/drivers/vfio/platform/reset/Makefile
@@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
 
 obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
 obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
+obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
new file mode 100644
index 0000000..a198196
--- /dev/null
+++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver provides reset support for Broadcom FlexRM ring manager
+ * to VFIO platform.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "vfio_platform_private.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE					0x10000
+#define RING_VER_MAGIC					0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER					0x000
+#define RING_CONTROL					0x034
+#define RING_FLUSH_DONE					0x038
+
+/* Register RING_CONTROL fields */
+#define CONTROL_FLUSH_SHIFT				5
+#define CONTROL_ACTIVE_SHIFT				4
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK					0x1
+
+static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
+{
+	unsigned int timeout;
+
+	/* Disable/inactivate ring */
+	writel_relaxed(0x0, ring + RING_CONTROL);
+
+	/* Flush ring with timeout of 1s */
+	timeout = 1000;
+	writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
+	do {
+		if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
+			break;
+		mdelay(1);
+	} while (timeout--);
+
+	if (!timeout)
+		pr_warn("VFIO FlexRM shutdown timedout\n");
+}
+
+static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
+{
+	void __iomem *ring;
+	struct vfio_platform_region *reg = &vdev->regions[0];
+
+	/* Map FlexRM ring registers if not mapped */
+	if (!reg->ioaddr) {
+		reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
+		if (!reg->ioaddr)
+			return -ENOMEM;
+	}
+
+	/* Discover and shutdown each FlexRM ring */
+	for (ring = reg->ioaddr;
+	     ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
+		if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
+			vfio_platform_bcmflexrm_shutdown(ring);
+	}
+
+	return 0;
+}
+
+module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
+			  vfio_platform_bcmflexrm_reset);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>");
+MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-20 11:17   ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel @ 2017-07-20 11:17 UTC (permalink / raw)
  To: linux-arm-kernel

This patch adds Broadcom FlexRM low-level reset for
VFIO platform.

It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring

The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.

Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Oza Oza <oza.oza@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 drivers/vfio/platform/reset/Kconfig                |  9 +++
 drivers/vfio/platform/reset/Makefile               |  1 +
 .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c

diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 70cccc5..8d8d226 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
 	  Enables the VFIO platform driver to handle reset for AMD XGBE
 
 	  If you don't know what to do here, say N.
+
+config VFIO_PLATFORM_BCMFLEXRM_RESET
+	tristate "VFIO support for Broadcom FlexRM reset"
+	depends on VFIO_PLATFORM
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Enables the VFIO platform driver to handle reset for Broadcom FlexRM
+
+	  If you don't know what to do here, say N.
diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
index 93f4e23..8d9874b 100644
--- a/drivers/vfio/platform/reset/Makefile
+++ b/drivers/vfio/platform/reset/Makefile
@@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
 
 obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
 obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
+obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
new file mode 100644
index 0000000..a198196
--- /dev/null
+++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * This driver provides reset support for Broadcom FlexRM ring manager
+ * to VFIO platform.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "vfio_platform_private.h"
+
+/* FlexRM configuration */
+#define RING_REGS_SIZE					0x10000
+#define RING_VER_MAGIC					0x76303031
+
+/* Per-Ring register offsets */
+#define RING_VER					0x000
+#define RING_CONTROL					0x034
+#define RING_FLUSH_DONE					0x038
+
+/* Register RING_CONTROL fields */
+#define CONTROL_FLUSH_SHIFT				5
+#define CONTROL_ACTIVE_SHIFT				4
+
+/* Register RING_FLUSH_DONE fields */
+#define FLUSH_DONE_MASK					0x1
+
+static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
+{
+	unsigned int timeout;
+
+	/* Disable/inactivate ring */
+	writel_relaxed(0x0, ring + RING_CONTROL);
+
+	/* Flush ring with timeout of 1s */
+	timeout = 1000;
+	writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
+	do {
+		if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
+			break;
+		mdelay(1);
+	} while (timeout--);
+
+	if (!timeout)
+		pr_warn("VFIO FlexRM shutdown timedout\n");
+}
+
+static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
+{
+	void __iomem *ring;
+	struct vfio_platform_region *reg = &vdev->regions[0];
+
+	/* Map FlexRM ring registers if not mapped */
+	if (!reg->ioaddr) {
+		reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
+		if (!reg->ioaddr)
+			return -ENOMEM;
+	}
+
+	/* Discover and shutdown each FlexRM ring */
+	for (ring = reg->ioaddr;
+	     ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
+		if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
+			vfio_platform_bcmflexrm_shutdown(ring);
+	}
+
+	return 0;
+}
+
+module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
+			  vfio_platform_bcmflexrm_reset);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
+MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
-- 
2.7.4

^ permalink raw reply related	[flat|nested] 12+ messages in thread
* Re: [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-29 13:01     ` Auger Eric
  0 siblings, 0 replies; 12+ messages in thread
From: Auger Eric @ 2017-07-29 13:01 UTC (permalink / raw)
  To: Anup Patel, Will Deacon, Robin Murphy, Joerg Roedel,
	Baptiste Reynal, Alex Williamson
  Cc: Scott Branden, linux-kernel, linux-arm-kernel, iommu, kvm,
	bcm-kernel-feedback-list

Hi Anup,
On 20/07/2017 13:17, Anup Patel wrote:
> This patch adds Broadcom FlexRM low-level reset for
> VFIO platform.
> 
> It will do the following:
> 1. Disable/Deactivate each FlexRM ring
> 2. Flush each FlexRM ring
> 
> The cleanup sequence for FlexRM rings is adapted from
> Broadcom FlexRM mailbox driver.
> 
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> Reviewed-by: Oza Oza <oza.oza@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
>  drivers/vfio/platform/reset/Kconfig                |  9 +++
>  drivers/vfio/platform/reset/Makefile               |  1 +
>  .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
>  3 files changed, 103 insertions(+)
>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> 
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..8d8d226 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>  	  Enables the VFIO platform driver to handle reset for AMD XGBE
>  
>  	  If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_BCMFLEXRM_RESET
> +	tristate "VFIO support for Broadcom FlexRM reset"
> +	depends on VFIO_PLATFORM
> +	depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?
> +	help
> +	  Enables the VFIO platform driver to handle reset for Broadcom FlexRM
> +
> +	  If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..8d9874b 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>  
>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> new file mode 100644
> index 0000000..a198196
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> @@ -0,0 +1,93 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * This driver provides reset support for Broadcom FlexRM ring manager
> + * to VFIO platform.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "vfio_platform_private.h"
> +
> +/* FlexRM configuration */
> +#define RING_REGS_SIZE					0x10000
> +#define RING_VER_MAGIC					0x76303031
> +
> +/* Per-Ring register offsets */
> +#define RING_VER					0x000
> +#define RING_CONTROL					0x034
> +#define RING_FLUSH_DONE					0x038
> +
> +/* Register RING_CONTROL fields */
> +#define CONTROL_FLUSH_SHIFT				5
> +#define CONTROL_ACTIVE_SHIFT				4
not used
> +
> +/* Register RING_FLUSH_DONE fields */
> +#define FLUSH_DONE_MASK					0x1
> +
> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
> +{
> +	unsigned int timeout;
> +
> +	/* Disable/inactivate ring */
> +	writel_relaxed(0x0, ring + RING_CONTROL);
> +
> +	/* Flush ring with timeout of 1s */
> +	timeout = 1000;
> +	writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
> +	do {
> +		if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
> +			break;
> +		mdelay(1);
> +	} while (timeout--);
> +
> +	if (!timeout)
> +		pr_warn("VFIO FlexRM shutdown timedout\n");
s/timedout/timeout

vfio_platform_bcmflexrm_shutdown may also return an error that would be
propagated to the called:
vfio_platform_release() would then emit a dev_warn + WARN_ON. your
choice - I know this is not done in amdxge reset function ;-) -.


Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
there is one section missing commented as "Abort all in-flight
requests". I understand there is no HW adherence of this section but I
just want to double check that after disabling and flush the ring as
above you guarantee there is no more DMA accesses likely to happen and
also no platform MSI can be triggered by the HW.

Otherwise looks good to me
Reviewed-by: Eric Auger <eric.auger@redhat.com>

For my curiosity do you intend to do a QEMU integration of this device?

Thanks

Eric
> +}
> +
> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
> +{
> +	void __iomem *ring;
> +	struct vfio_platform_region *reg = &vdev->regions[0];
> +
> +	/* Map FlexRM ring registers if not mapped */
> +	if (!reg->ioaddr) {
> +		reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
> +		if (!reg->ioaddr)
> +			return -ENOMEM;
> +	}
> +
> +	/* Discover and shutdown each FlexRM ring */
> +	for (ring = reg->ioaddr;
> +	     ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
> +		if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
> +			vfio_platform_bcmflexrm_shutdown(ring);
> +	}
> +
> +	return 0;
> +}
> +
> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
> +			  vfio_platform_bcmflexrm_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-29 13:01     ` Auger Eric
  0 siblings, 0 replies; 12+ messages in thread
From: Auger Eric @ 2017-07-29 13:01 UTC (permalink / raw)
  To: Anup Patel, Will Deacon, Robin Murphy, Joerg Roedel,
	Baptiste Reynal, Alex Williamson
  Cc: kvm-u79uwXL29TY76Z2rM5mHXA, Scott Branden,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA,
	iommu-cunTk1MwBs9QetFLy7KEm3xJsTq8ys+cHZ5vskTnxNA,
	bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

Hi Anup,
On 20/07/2017 13:17, Anup Patel wrote:
> This patch adds Broadcom FlexRM low-level reset for
> VFIO platform.
> 
> It will do the following:
> 1. Disable/Deactivate each FlexRM ring
> 2. Flush each FlexRM ring
> 
> The cleanup sequence for FlexRM rings is adapted from
> Broadcom FlexRM mailbox driver.
> 
> Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Oza Oza <oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---
>  drivers/vfio/platform/reset/Kconfig                |  9 +++
>  drivers/vfio/platform/reset/Makefile               |  1 +
>  .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
>  3 files changed, 103 insertions(+)
>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> 
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..8d8d226 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>  	  Enables the VFIO platform driver to handle reset for AMD XGBE
>  
>  	  If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_BCMFLEXRM_RESET
> +	tristate "VFIO support for Broadcom FlexRM reset"
> +	depends on VFIO_PLATFORM
> +	depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?
> +	help
> +	  Enables the VFIO platform driver to handle reset for Broadcom FlexRM
> +
> +	  If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..8d9874b 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>  
>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> new file mode 100644
> index 0000000..a198196
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> @@ -0,0 +1,93 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * This driver provides reset support for Broadcom FlexRM ring manager
> + * to VFIO platform.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "vfio_platform_private.h"
> +
> +/* FlexRM configuration */
> +#define RING_REGS_SIZE					0x10000
> +#define RING_VER_MAGIC					0x76303031
> +
> +/* Per-Ring register offsets */
> +#define RING_VER					0x000
> +#define RING_CONTROL					0x034
> +#define RING_FLUSH_DONE					0x038
> +
> +/* Register RING_CONTROL fields */
> +#define CONTROL_FLUSH_SHIFT				5
> +#define CONTROL_ACTIVE_SHIFT				4
not used
> +
> +/* Register RING_FLUSH_DONE fields */
> +#define FLUSH_DONE_MASK					0x1
> +
> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
> +{
> +	unsigned int timeout;
> +
> +	/* Disable/inactivate ring */
> +	writel_relaxed(0x0, ring + RING_CONTROL);
> +
> +	/* Flush ring with timeout of 1s */
> +	timeout = 1000;
> +	writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
> +	do {
> +		if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
> +			break;
> +		mdelay(1);
> +	} while (timeout--);
> +
> +	if (!timeout)
> +		pr_warn("VFIO FlexRM shutdown timedout\n");
s/timedout/timeout

vfio_platform_bcmflexrm_shutdown may also return an error that would be
propagated to the called:
vfio_platform_release() would then emit a dev_warn + WARN_ON. your
choice - I know this is not done in amdxge reset function ;-) -.


Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
there is one section missing commented as "Abort all in-flight
requests". I understand there is no HW adherence of this section but I
just want to double check that after disabling and flush the ring as
above you guarantee there is no more DMA accesses likely to happen and
also no platform MSI can be triggered by the HW.

Otherwise looks good to me
Reviewed-by: Eric Auger <eric.auger-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>

For my curiosity do you intend to do a QEMU integration of this device?

Thanks

Eric
> +}
> +
> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
> +{
> +	void __iomem *ring;
> +	struct vfio_platform_region *reg = &vdev->regions[0];
> +
> +	/* Map FlexRM ring registers if not mapped */
> +	if (!reg->ioaddr) {
> +		reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
> +		if (!reg->ioaddr)
> +			return -ENOMEM;
> +	}
> +
> +	/* Discover and shutdown each FlexRM ring */
> +	for (ring = reg->ioaddr;
> +	     ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
> +		if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
> +			vfio_platform_bcmflexrm_shutdown(ring);
> +	}
> +
> +	return 0;
> +}
> +
> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
> +			  vfio_platform_bcmflexrm_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>");
> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-29 13:01     ` Auger Eric
  0 siblings, 0 replies; 12+ messages in thread
From: Auger Eric @ 2017-07-29 13:01 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Anup,
On 20/07/2017 13:17, Anup Patel wrote:
> This patch adds Broadcom FlexRM low-level reset for
> VFIO platform.
> 
> It will do the following:
> 1. Disable/Deactivate each FlexRM ring
> 2. Flush each FlexRM ring
> 
> The cleanup sequence for FlexRM rings is adapted from
> Broadcom FlexRM mailbox driver.
> 
> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
> Reviewed-by: Oza Oza <oza.oza@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
>  drivers/vfio/platform/reset/Kconfig                |  9 +++
>  drivers/vfio/platform/reset/Makefile               |  1 +
>  .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
>  3 files changed, 103 insertions(+)
>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> 
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 70cccc5..8d8d226 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>  	  Enables the VFIO platform driver to handle reset for AMD XGBE
>  
>  	  If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_BCMFLEXRM_RESET
> +	tristate "VFIO support for Broadcom FlexRM reset"
> +	depends on VFIO_PLATFORM
> +	depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?
> +	help
> +	  Enables the VFIO platform driver to handle reset for Broadcom FlexRM
> +
> +	  If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 93f4e23..8d9874b 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>  
>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> new file mode 100644
> index 0000000..a198196
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
> @@ -0,0 +1,93 @@
> +/*
> + * Copyright (C) 2017 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +/*
> + * This driver provides reset support for Broadcom FlexRM ring manager
> + * to VFIO platform.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +
> +#include "vfio_platform_private.h"
> +
> +/* FlexRM configuration */
> +#define RING_REGS_SIZE					0x10000
> +#define RING_VER_MAGIC					0x76303031
> +
> +/* Per-Ring register offsets */
> +#define RING_VER					0x000
> +#define RING_CONTROL					0x034
> +#define RING_FLUSH_DONE					0x038
> +
> +/* Register RING_CONTROL fields */
> +#define CONTROL_FLUSH_SHIFT				5
> +#define CONTROL_ACTIVE_SHIFT				4
not used
> +
> +/* Register RING_FLUSH_DONE fields */
> +#define FLUSH_DONE_MASK					0x1
> +
> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
> +{
> +	unsigned int timeout;
> +
> +	/* Disable/inactivate ring */
> +	writel_relaxed(0x0, ring + RING_CONTROL);
> +
> +	/* Flush ring with timeout of 1s */
> +	timeout = 1000;
> +	writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
> +	do {
> +		if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
> +			break;
> +		mdelay(1);
> +	} while (timeout--);
> +
> +	if (!timeout)
> +		pr_warn("VFIO FlexRM shutdown timedout\n");
s/timedout/timeout

vfio_platform_bcmflexrm_shutdown may also return an error that would be
propagated to the called:
vfio_platform_release() would then emit a dev_warn + WARN_ON. your
choice - I know this is not done in amdxge reset function ;-) -.


Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
there is one section missing commented as "Abort all in-flight
requests". I understand there is no HW adherence of this section but I
just want to double check that after disabling and flush the ring as
above you guarantee there is no more DMA accesses likely to happen and
also no platform MSI can be triggered by the HW.

Otherwise looks good to me
Reviewed-by: Eric Auger <eric.auger@redhat.com>

For my curiosity do you intend to do a QEMU integration of this device?

Thanks

Eric
> +}
> +
> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
> +{
> +	void __iomem *ring;
> +	struct vfio_platform_region *reg = &vdev->regions[0];
> +
> +	/* Map FlexRM ring registers if not mapped */
> +	if (!reg->ioaddr) {
> +		reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
> +		if (!reg->ioaddr)
> +			return -ENOMEM;
> +	}
> +
> +	/* Discover and shutdown each FlexRM ring */
> +	for (ring = reg->ioaddr;
> +	     ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
> +		if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
> +			vfio_platform_bcmflexrm_shutdown(ring);
> +	}
> +
> +	return 0;
> +}
> +
> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
> +			  vfio_platform_bcmflexrm_reset);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-31  4:50       ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel @ 2017-07-31  4:50 UTC (permalink / raw)
  To: Auger Eric
  Cc: Will Deacon, Robin Murphy, Joerg Roedel, Baptiste Reynal,
	Alex Williamson, Scott Branden, Linux Kernel, Linux ARM Kernel,
	Linux IOMMU, kvm, BCM Kernel Feedback

Hi Eric,

Thanks for the review comments...

On Sat, Jul 29, 2017 at 6:31 PM, Auger Eric <eric.auger@redhat.com> wrote:
> Hi Anup,
> On 20/07/2017 13:17, Anup Patel wrote:
>> This patch adds Broadcom FlexRM low-level reset for
>> VFIO platform.
>>
>> It will do the following:
>> 1. Disable/Deactivate each FlexRM ring
>> 2. Flush each FlexRM ring
>>
>> The cleanup sequence for FlexRM rings is adapted from
>> Broadcom FlexRM mailbox driver.
>>
>> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
>> Reviewed-by: Oza Oza <oza.oza@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> ---
>>  drivers/vfio/platform/reset/Kconfig                |  9 +++
>>  drivers/vfio/platform/reset/Makefile               |  1 +
>>  .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
>>  3 files changed, 103 insertions(+)
>>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>>
>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> index 70cccc5..8d8d226 100644
>> --- a/drivers/vfio/platform/reset/Kconfig
>> +++ b/drivers/vfio/platform/reset/Kconfig
>> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>>         Enables the VFIO platform driver to handle reset for AMD XGBE
>>
>>         If you don't know what to do here, say N.
>> +
>> +config VFIO_PLATFORM_BCMFLEXRM_RESET
>> +     tristate "VFIO support for Broadcom FlexRM reset"
>> +     depends on VFIO_PLATFORM
>> +     depends on ARCH_BCM_IPROC || COMPILE_TEST
> depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?

OK, I will update this.

>> +     help
>> +       Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>> +
>> +       If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> index 93f4e23..8d9874b 100644
>> --- a/drivers/vfio/platform/reset/Makefile
>> +++ b/drivers/vfio/platform/reset/Makefile
>> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>>
>>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
>> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> new file mode 100644
>> index 0000000..a198196
>> --- /dev/null
>> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> @@ -0,0 +1,93 @@
>> +/*
>> + * Copyright (C) 2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +/*
>> + * This driver provides reset support for Broadcom FlexRM ring manager
>> + * to VFIO platform.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +
>> +#include "vfio_platform_private.h"
>> +
>> +/* FlexRM configuration */
>> +#define RING_REGS_SIZE                                       0x10000
>> +#define RING_VER_MAGIC                                       0x76303031
>> +
>> +/* Per-Ring register offsets */
>> +#define RING_VER                                     0x000
>> +#define RING_CONTROL                                 0x034
>> +#define RING_FLUSH_DONE                                      0x038
>> +
>> +/* Register RING_CONTROL fields */
>> +#define CONTROL_FLUSH_SHIFT                          5
>> +#define CONTROL_ACTIVE_SHIFT                         4
> not used

OK, I will remove this.

>> +
>> +/* Register RING_FLUSH_DONE fields */
>> +#define FLUSH_DONE_MASK                                      0x1
>> +
>> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
>> +{
>> +     unsigned int timeout;
>> +
>> +     /* Disable/inactivate ring */
>> +     writel_relaxed(0x0, ring + RING_CONTROL);
>> +
>> +     /* Flush ring with timeout of 1s */
>> +     timeout = 1000;
>> +     writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
>> +     do {
>> +             if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
>> +                     break;
>> +             mdelay(1);
>> +     } while (timeout--);
>> +
>> +     if (!timeout)
>> +             pr_warn("VFIO FlexRM shutdown timedout\n");
> s/timedout/timeout

OK, will fix this.

>
> vfio_platform_bcmflexrm_shutdown may also return an error that would be
> propagated to the called:
> vfio_platform_release() would then emit a dev_warn + WARN_ON. your
> choice - I know this is not done in amdxge reset function ;-) -.

Yes, its good to return error. I will try to implement this.

>
>
> Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
> there is one section missing commented as "Abort all in-flight
> requests". I understand there is no HW adherence of this section but I
> just want to double check that after disabling and flush the ring as
> above you guarantee there is no more DMA accesses likely to happen and
> also no platform MSI can be triggered by the HW.

We can only abort in-flight requests if we are managing device in-kernel.

For VFIO, the device is managed from user-space (DPDK) or Guest/VM
so we just need to bring HW in sane state.

>
> Otherwise looks good to me
> Reviewed-by: Eric Auger <eric.auger@redhat.com>
>
> For my curiosity do you intend to do a QEMU integration of this device?

Our primary objective is to use FlexRM from user-space poll mode drivers
(DPDK).

For now, we don't plan to add support FlexRM pass-through for Guest/VM.

>
> Thanks
>
> Eric
>> +}
>> +
>> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
>> +{
>> +     void __iomem *ring;
>> +     struct vfio_platform_region *reg = &vdev->regions[0];
>> +
>> +     /* Map FlexRM ring registers if not mapped */
>> +     if (!reg->ioaddr) {
>> +             reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
>> +             if (!reg->ioaddr)
>> +                     return -ENOMEM;
>> +     }
>> +
>> +     /* Discover and shutdown each FlexRM ring */
>> +     for (ring = reg->ioaddr;
>> +          ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
>> +             if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
>> +                     vfio_platform_bcmflexrm_shutdown(ring);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
>> +                       vfio_platform_bcmflexrm_reset);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
>> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
>>

Regards,
Anup

^ permalink raw reply	[flat|nested] 12+ messages in thread
* Re: [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-31  4:50       ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel via iommu @ 2017-07-31  4:50 UTC (permalink / raw)
  To: Auger Eric
  Cc: kvm-u79uwXL29TY76Z2rM5mHXA, Scott Branden, Will Deacon,
	Linux Kernel, Linux IOMMU, BCM Kernel Feedback, Linux ARM Kernel

Hi Eric,

Thanks for the review comments...

On Sat, Jul 29, 2017 at 6:31 PM, Auger Eric <eric.auger-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> wrote:
> Hi Anup,
> On 20/07/2017 13:17, Anup Patel wrote:
>> This patch adds Broadcom FlexRM low-level reset for
>> VFIO platform.
>>
>> It will do the following:
>> 1. Disable/Deactivate each FlexRM ring
>> 2. Flush each FlexRM ring
>>
>> The cleanup sequence for FlexRM rings is adapted from
>> Broadcom FlexRM mailbox driver.
>>
>> Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Oza Oza <oza.oza-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>> ---
>>  drivers/vfio/platform/reset/Kconfig                |  9 +++
>>  drivers/vfio/platform/reset/Makefile               |  1 +
>>  .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
>>  3 files changed, 103 insertions(+)
>>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>>
>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> index 70cccc5..8d8d226 100644
>> --- a/drivers/vfio/platform/reset/Kconfig
>> +++ b/drivers/vfio/platform/reset/Kconfig
>> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>>         Enables the VFIO platform driver to handle reset for AMD XGBE
>>
>>         If you don't know what to do here, say N.
>> +
>> +config VFIO_PLATFORM_BCMFLEXRM_RESET
>> +     tristate "VFIO support for Broadcom FlexRM reset"
>> +     depends on VFIO_PLATFORM
>> +     depends on ARCH_BCM_IPROC || COMPILE_TEST
> depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?

OK, I will update this.

>> +     help
>> +       Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>> +
>> +       If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> index 93f4e23..8d9874b 100644
>> --- a/drivers/vfio/platform/reset/Makefile
>> +++ b/drivers/vfio/platform/reset/Makefile
>> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>>
>>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
>> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> new file mode 100644
>> index 0000000..a198196
>> --- /dev/null
>> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> @@ -0,0 +1,93 @@
>> +/*
>> + * Copyright (C) 2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +/*
>> + * This driver provides reset support for Broadcom FlexRM ring manager
>> + * to VFIO platform.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +
>> +#include "vfio_platform_private.h"
>> +
>> +/* FlexRM configuration */
>> +#define RING_REGS_SIZE                                       0x10000
>> +#define RING_VER_MAGIC                                       0x76303031
>> +
>> +/* Per-Ring register offsets */
>> +#define RING_VER                                     0x000
>> +#define RING_CONTROL                                 0x034
>> +#define RING_FLUSH_DONE                                      0x038
>> +
>> +/* Register RING_CONTROL fields */
>> +#define CONTROL_FLUSH_SHIFT                          5
>> +#define CONTROL_ACTIVE_SHIFT                         4
> not used

OK, I will remove this.

>> +
>> +/* Register RING_FLUSH_DONE fields */
>> +#define FLUSH_DONE_MASK                                      0x1
>> +
>> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
>> +{
>> +     unsigned int timeout;
>> +
>> +     /* Disable/inactivate ring */
>> +     writel_relaxed(0x0, ring + RING_CONTROL);
>> +
>> +     /* Flush ring with timeout of 1s */
>> +     timeout = 1000;
>> +     writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
>> +     do {
>> +             if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
>> +                     break;
>> +             mdelay(1);
>> +     } while (timeout--);
>> +
>> +     if (!timeout)
>> +             pr_warn("VFIO FlexRM shutdown timedout\n");
> s/timedout/timeout

OK, will fix this.

>
> vfio_platform_bcmflexrm_shutdown may also return an error that would be
> propagated to the called:
> vfio_platform_release() would then emit a dev_warn + WARN_ON. your
> choice - I know this is not done in amdxge reset function ;-) -.

Yes, its good to return error. I will try to implement this.

>
>
> Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
> there is one section missing commented as "Abort all in-flight
> requests". I understand there is no HW adherence of this section but I
> just want to double check that after disabling and flush the ring as
> above you guarantee there is no more DMA accesses likely to happen and
> also no platform MSI can be triggered by the HW.

We can only abort in-flight requests if we are managing device in-kernel.

For VFIO, the device is managed from user-space (DPDK) or Guest/VM
so we just need to bring HW in sane state.

>
> Otherwise looks good to me
> Reviewed-by: Eric Auger <eric.auger-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>
> For my curiosity do you intend to do a QEMU integration of this device?

Our primary objective is to use FlexRM from user-space poll mode drivers
(DPDK).

For now, we don't plan to add support FlexRM pass-through for Guest/VM.

>
> Thanks
>
> Eric
>> +}
>> +
>> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
>> +{
>> +     void __iomem *ring;
>> +     struct vfio_platform_region *reg = &vdev->regions[0];
>> +
>> +     /* Map FlexRM ring registers if not mapped */
>> +     if (!reg->ioaddr) {
>> +             reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
>> +             if (!reg->ioaddr)
>> +                     return -ENOMEM;
>> +     }
>> +
>> +     /* Discover and shutdown each FlexRM ring */
>> +     for (ring = reg->ioaddr;
>> +          ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
>> +             if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
>> +                     vfio_platform_bcmflexrm_shutdown(ring);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
>> +                       vfio_platform_bcmflexrm_reset);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>");
>> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
>>

Regards,
Anup

^ permalink raw reply	[flat|nested] 12+ messages in thread
* [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module
@ 2017-07-31  4:50       ` Anup Patel via iommu
  0 siblings, 0 replies; 12+ messages in thread
From: Anup Patel @ 2017-07-31  4:50 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Eric,

Thanks for the review comments...

On Sat, Jul 29, 2017 at 6:31 PM, Auger Eric <eric.auger@redhat.com> wrote:
> Hi Anup,
> On 20/07/2017 13:17, Anup Patel wrote:
>> This patch adds Broadcom FlexRM low-level reset for
>> VFIO platform.
>>
>> It will do the following:
>> 1. Disable/Deactivate each FlexRM ring
>> 2. Flush each FlexRM ring
>>
>> The cleanup sequence for FlexRM rings is adapted from
>> Broadcom FlexRM mailbox driver.
>>
>> Signed-off-by: Anup Patel <anup.patel@broadcom.com>
>> Reviewed-by: Oza Oza <oza.oza@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>> ---
>>  drivers/vfio/platform/reset/Kconfig                |  9 +++
>>  drivers/vfio/platform/reset/Makefile               |  1 +
>>  .../vfio/platform/reset/vfio_platform_bcmflexrm.c  | 93 ++++++++++++++++++++++
>>  3 files changed, 103 insertions(+)
>>  create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>>
>> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
>> index 70cccc5..8d8d226 100644
>> --- a/drivers/vfio/platform/reset/Kconfig
>> +++ b/drivers/vfio/platform/reset/Kconfig
>> @@ -13,3 +13,12 @@ config VFIO_PLATFORM_AMDXGBE_RESET
>>         Enables the VFIO platform driver to handle reset for AMD XGBE
>>
>>         If you don't know what to do here, say N.
>> +
>> +config VFIO_PLATFORM_BCMFLEXRM_RESET
>> +     tristate "VFIO support for Broadcom FlexRM reset"
>> +     depends on VFIO_PLATFORM
>> +     depends on ARCH_BCM_IPROC || COMPILE_TEST
> depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)?

OK, I will update this.

>> +     help
>> +       Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>> +
>> +       If you don't know what to do here, say N.
>> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
>> index 93f4e23..8d9874b 100644
>> --- a/drivers/vfio/platform/reset/Makefile
>> +++ b/drivers/vfio/platform/reset/Makefile
>> @@ -5,3 +5,4 @@ ccflags-y += -Idrivers/vfio/platform
>>
>>  obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
>>  obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
>> +obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
>> diff --git a/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> new file mode 100644
>> index 0000000..a198196
>> --- /dev/null
>> +++ b/drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
>> @@ -0,0 +1,93 @@
>> +/*
>> + * Copyright (C) 2017 Broadcom
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program.  If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +/*
>> + * This driver provides reset support for Broadcom FlexRM ring manager
>> + * to VFIO platform.
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +
>> +#include "vfio_platform_private.h"
>> +
>> +/* FlexRM configuration */
>> +#define RING_REGS_SIZE                                       0x10000
>> +#define RING_VER_MAGIC                                       0x76303031
>> +
>> +/* Per-Ring register offsets */
>> +#define RING_VER                                     0x000
>> +#define RING_CONTROL                                 0x034
>> +#define RING_FLUSH_DONE                                      0x038
>> +
>> +/* Register RING_CONTROL fields */
>> +#define CONTROL_FLUSH_SHIFT                          5
>> +#define CONTROL_ACTIVE_SHIFT                         4
> not used

OK, I will remove this.

>> +
>> +/* Register RING_FLUSH_DONE fields */
>> +#define FLUSH_DONE_MASK                                      0x1
>> +
>> +static void vfio_platform_bcmflexrm_shutdown(void __iomem *ring)
>> +{
>> +     unsigned int timeout;
>> +
>> +     /* Disable/inactivate ring */
>> +     writel_relaxed(0x0, ring + RING_CONTROL);
>> +
>> +     /* Flush ring with timeout of 1s */
>> +     timeout = 1000;
>> +     writel_relaxed(BIT(CONTROL_FLUSH_SHIFT), ring + RING_CONTROL);
>> +     do {
>> +             if (readl_relaxed(ring + RING_FLUSH_DONE) & FLUSH_DONE_MASK)
>> +                     break;
>> +             mdelay(1);
>> +     } while (timeout--);
>> +
>> +     if (!timeout)
>> +             pr_warn("VFIO FlexRM shutdown timedout\n");
> s/timedout/timeout

OK, will fix this.

>
> vfio_platform_bcmflexrm_shutdown may also return an error that would be
> propagated to the called:
> vfio_platform_release() would then emit a dev_warn + WARN_ON. your
> choice - I know this is not done in amdxge reset function ;-) -.

Yes, its good to return error. I will try to implement this.

>
>
> Comparing to the drivers/mailbox/bcm-flexrm-mailbox.c flexrm_shutdown()
> there is one section missing commented as "Abort all in-flight
> requests". I understand there is no HW adherence of this section but I
> just want to double check that after disabling and flush the ring as
> above you guarantee there is no more DMA accesses likely to happen and
> also no platform MSI can be triggered by the HW.

We can only abort in-flight requests if we are managing device in-kernel.

For VFIO, the device is managed from user-space (DPDK) or Guest/VM
so we just need to bring HW in sane state.

>
> Otherwise looks good to me
> Reviewed-by: Eric Auger <eric.auger@redhat.com>
>
> For my curiosity do you intend to do a QEMU integration of this device?

Our primary objective is to use FlexRM from user-space poll mode drivers
(DPDK).

For now, we don't plan to add support FlexRM pass-through for Guest/VM.

>
> Thanks
>
> Eric
>> +}
>> +
>> +static int vfio_platform_bcmflexrm_reset(struct vfio_platform_device *vdev)
>> +{
>> +     void __iomem *ring;
>> +     struct vfio_platform_region *reg = &vdev->regions[0];
>> +
>> +     /* Map FlexRM ring registers if not mapped */
>> +     if (!reg->ioaddr) {
>> +             reg->ioaddr = ioremap_nocache(reg->addr, reg->size);
>> +             if (!reg->ioaddr)
>> +                     return -ENOMEM;
>> +     }
>> +
>> +     /* Discover and shutdown each FlexRM ring */
>> +     for (ring = reg->ioaddr;
>> +          ring < (reg->ioaddr + reg->size); ring += RING_REGS_SIZE) {
>> +             if (readl_relaxed(ring + RING_VER) == RING_VER_MAGIC)
>> +                     vfio_platform_bcmflexrm_shutdown(ring);
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +module_vfio_reset_handler("brcm,iproc-flexrm-mbox",
>> +                       vfio_platform_bcmflexrm_reset);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
>> +MODULE_DESCRIPTION("Reset support for Broadcom FlexRM VFIO platform device");
>>

Regards,
Anup

^ permalink raw reply	[flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-07-31  4:50 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-20 11:17 [PATCH v3] FlexRM support in VFIO platform Anup Patel
2017-07-20 11:17 ` Anup Patel
2017-07-20 11:17 ` Anup Patel via iommu
2017-07-20 11:17 ` [PATCH v3] vfio: platform: reset: Add Broadcom FlexRM reset module Anup Patel
2017-07-20 11:17   ` Anup Patel
2017-07-20 11:17   ` Anup Patel via iommu
2017-07-29 13:01   ` Auger Eric
2017-07-29 13:01     ` Auger Eric
2017-07-29 13:01     ` Auger Eric
2017-07-31  4:50     ` Anup Patel
2017-07-31  4:50       ` Anup Patel
2017-07-31  4:50       ` Anup Patel via iommu

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.