From: Andrew Davis <afd@ti.com> To: Jai Luthra <j-luthra@ti.com>, Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Mark Brown <broonie@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Jayesh Choudhary <j-choudhary@ti.com> Subject: Re: [PATCH v5 2/6] arm64: dts: ti: k3-am62-main: Add McASP nodes Date: Mon, 13 Mar 2023 12:10:27 -0500 [thread overview] Message-ID: <c4721d5f-a265-f692-2b57-f0cfcd2702b3@ti.com> (raw) In-Reply-To: <20230313-mcasp_upstream-v5-2-d6844707aa8a@ti.com> On 3/13/23 9:49 AM, Jai Luthra wrote: > From: Jayesh Choudhary <j-choudhary@ti.com> > > Add the nodes for McASP 0-2. > > Use the audio-friendly 96MHz main_1_hsdivout6_clk as clock parent > instead of the default 100Mhz main_2_hsdivout8_clk source. > > Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> > Signed-off-by: Jai Luthra <j-luthra@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > index ea683fd77d6a..4da5747987bb 100644 > --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > @@ -787,4 +787,64 @@ epwm2: pwm@23020000 { > clock-names = "tbclk", "fck"; > status = "disabled"; > }; > + > + mcasp0: mcasp@2b00000 { I wonder if we want to switch to generic node naming here, audio-controller@.. > + compatible = "ti,am33xx-mcasp-audio"; > + reg = <0x00 0x02b00000 0x00 0x2000>, > + <0x00 0x02b08000 0x00 0x400>; > + reg-names = "mpu","dat"; Space after , > + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; Align with space, indent with tab, as you did with "reg" property. Same for McASP 1/2. Reviewed-by: Andrew Davis <afd@ti.com> > + interrupt-names = "tx", "rx"; > + > + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; > + dma-names = "tx", "rx"; > + > + clocks = <&k3_clks 190 0>; > + clock-names = "fck"; > + assigned-clocks = <&k3_clks 190 0>; > + assigned-clock-parents = <&k3_clks 190 2>; > + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + }; > + > + mcasp1: mcasp@2b10000 { > + compatible = "ti,am33xx-mcasp-audio"; > + reg = <0x00 0x02b10000 0x00 0x2000>, > + <0x00 0x02b18000 0x00 0x400>; > + reg-names = "mpu","dat"; > + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "tx", "rx"; > + > + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; > + dma-names = "tx", "rx"; > + > + clocks = <&k3_clks 191 0>; > + clock-names = "fck"; > + assigned-clocks = <&k3_clks 191 0>; > + assigned-clock-parents = <&k3_clks 191 2>; > + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + }; > + > + mcasp2: mcasp@2b20000 { > + compatible = "ti,am33xx-mcasp-audio"; > + reg = <0x00 0x02b20000 0x00 0x2000>, > + <0x00 0x02b28000 0x00 0x400>; > + reg-names = "mpu","dat"; > + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "tx", "rx"; > + > + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; > + dma-names = "tx", "rx"; > + > + clocks = <&k3_clks 192 0>; > + clock-names = "fck"; > + assigned-clocks = <&k3_clks 192 0>; > + assigned-clock-parents = <&k3_clks 192 2>; > + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + }; > }; >
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Davis <afd@ti.com> To: Jai Luthra <j-luthra@ti.com>, Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Mark Brown <broonie@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Jayesh Choudhary <j-choudhary@ti.com> Subject: Re: [PATCH v5 2/6] arm64: dts: ti: k3-am62-main: Add McASP nodes Date: Mon, 13 Mar 2023 12:10:27 -0500 [thread overview] Message-ID: <c4721d5f-a265-f692-2b57-f0cfcd2702b3@ti.com> (raw) In-Reply-To: <20230313-mcasp_upstream-v5-2-d6844707aa8a@ti.com> On 3/13/23 9:49 AM, Jai Luthra wrote: > From: Jayesh Choudhary <j-choudhary@ti.com> > > Add the nodes for McASP 0-2. > > Use the audio-friendly 96MHz main_1_hsdivout6_clk as clock parent > instead of the default 100Mhz main_2_hsdivout8_clk source. > > Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com> > Signed-off-by: Jai Luthra <j-luthra@ti.com> > --- > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++++++++++++++ > 1 file changed, 60 insertions(+) > > diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > index ea683fd77d6a..4da5747987bb 100644 > --- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > +++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi > @@ -787,4 +787,64 @@ epwm2: pwm@23020000 { > clock-names = "tbclk", "fck"; > status = "disabled"; > }; > + > + mcasp0: mcasp@2b00000 { I wonder if we want to switch to generic node naming here, audio-controller@.. > + compatible = "ti,am33xx-mcasp-audio"; > + reg = <0x00 0x02b00000 0x00 0x2000>, > + <0x00 0x02b08000 0x00 0x400>; > + reg-names = "mpu","dat"; Space after , > + interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>; Align with space, indent with tab, as you did with "reg" property. Same for McASP 1/2. Reviewed-by: Andrew Davis <afd@ti.com> > + interrupt-names = "tx", "rx"; > + > + dmas = <&main_bcdma 0 0xc500 0>, <&main_bcdma 0 0x4500 0>; > + dma-names = "tx", "rx"; > + > + clocks = <&k3_clks 190 0>; > + clock-names = "fck"; > + assigned-clocks = <&k3_clks 190 0>; > + assigned-clock-parents = <&k3_clks 190 2>; > + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + }; > + > + mcasp1: mcasp@2b10000 { > + compatible = "ti,am33xx-mcasp-audio"; > + reg = <0x00 0x02b10000 0x00 0x2000>, > + <0x00 0x02b18000 0x00 0x400>; > + reg-names = "mpu","dat"; > + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "tx", "rx"; > + > + dmas = <&main_bcdma 0 0xc501 0>, <&main_bcdma 0 0x4501 0>; > + dma-names = "tx", "rx"; > + > + clocks = <&k3_clks 191 0>; > + clock-names = "fck"; > + assigned-clocks = <&k3_clks 191 0>; > + assigned-clock-parents = <&k3_clks 191 2>; > + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + }; > + > + mcasp2: mcasp@2b20000 { > + compatible = "ti,am33xx-mcasp-audio"; > + reg = <0x00 0x02b20000 0x00 0x2000>, > + <0x00 0x02b28000 0x00 0x400>; > + reg-names = "mpu","dat"; > + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "tx", "rx"; > + > + dmas = <&main_bcdma 0 0xc502 0>, <&main_bcdma 0 0x4502 0>; > + dma-names = "tx", "rx"; > + > + clocks = <&k3_clks 192 0>; > + clock-names = "fck"; > + assigned-clocks = <&k3_clks 192 0>; > + assigned-clock-parents = <&k3_clks 192 2>; > + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; > + status = "disabled"; > + }; > }; > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-13 17:12 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-13 14:49 [PATCH v5 0/6] arm64: ti: Enable audio on AM62 and AM62A Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-13 14:49 ` [PATCH v5 1/6] arm64: defconfig: Enable audio drivers for TI K3 SoCs Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-13 14:49 ` [PATCH v5 2/6] arm64: dts: ti: k3-am62-main: Add McASP nodes Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-13 17:10 ` Andrew Davis [this message] 2023-03-13 17:10 ` Andrew Davis 2023-03-13 14:49 ` [PATCH v5 3/6] arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-15 4:23 ` Jayesh Choudhary 2023-03-15 4:23 ` Jayesh Choudhary 2023-03-13 14:49 ` [PATCH v5 4/6] arm64: dts: ti: k3-am62a-main: Add nodes for McASP Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-15 4:28 ` Jayesh Choudhary 2023-03-15 4:28 ` Jayesh Choudhary 2023-03-13 14:49 ` [PATCH v5 5/6] arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-13 14:49 ` [PATCH v5 6/6] arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A Jai Luthra 2023-03-13 14:49 ` Jai Luthra 2023-03-15 4:32 ` Jayesh Choudhary 2023-03-15 4:32 ` Jayesh Choudhary 2023-03-15 6:29 ` Jai Luthra 2023-03-15 6:29 ` Jai Luthra
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=c4721d5f-a265-f692-2b57-f0cfcd2702b3@ti.com \ --to=afd@ti.com \ --cc=broonie@kernel.org \ --cc=catalin.marinas@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=j-choudhary@ti.com \ --cc=j-luthra@ti.com \ --cc=kristo@kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=vigneshr@ti.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.