* [PATCH] meta-freescale: convert to new override syntax in honister
@ 2021-08-07 7:07 Thomas Perrot
2021-08-07 11:33 ` [meta-freescale] " Otavio Salvador
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Perrot @ 2021-08-07 7:07 UTC (permalink / raw)
To: meta-freescale; +Cc: Thomas Perrot
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
---
classes/fsl-eula-unpack.bbclass | 4 +-
classes/fsl-u-boot-localversion.bbclass | 2 +-
.../fsl-vivante-kernel-driver-handler.bbclass | 2 +-
classes/image_types_fsl.bbclass | 2 +-
classes/imx-boot-container.bbclass | 4 +-
classes/kernel-imximage.bbclass | 4 +-
classes/kernel-itbimage.bbclass | 2 +-
classes/mfgtool-initramfs-image.bbclass | 2 +-
classes/qoriq_build_64bit_kernel.bbclass | 4 +-
| 6 +-
...e-imx-security-controller-firmware.bbclass | 6 +-
conf/layer.conf | 2 +-
conf/machine/imx6qdlsabreauto.conf | 18 +-
conf/machine/imx6qdlsabresd.conf | 18 +-
conf/machine/imx6slevk.conf | 2 +-
conf/machine/imx6sllevk.conf | 2 +-
conf/machine/imx6sxsabreauto.conf | 4 +-
conf/machine/imx6sxsabresd.conf | 4 +-
conf/machine/imx6ulevk.conf | 12 +-
conf/machine/imx6ullevk.conf | 2 +-
conf/machine/imx6ulz-14x14-evk.conf | 2 +-
conf/machine/imx7dsabresd.conf | 2 +-
conf/machine/imx7ulpevk.conf | 4 +-
conf/machine/imx8dxl-lpddr4-evk.conf | 2 +-
conf/machine/imx8mm-ddr4-evk.conf | 2 +-
conf/machine/imx8mm-lpddr4-evk.conf | 2 +-
conf/machine/imx8mn-ddr4-evk.conf | 2 +-
conf/machine/imx8mn-lpddr4-evk.conf | 2 +-
conf/machine/imx8mp-ddr4-evk.conf | 2 +-
conf/machine/imx8mp-lpddr4-evk.conf | 2 +-
conf/machine/imx8mq-evk.conf | 12 +-
conf/machine/imx8qm-mek.conf | 8 +-
conf/machine/imx8qxp-mek.conf | 2 +-
conf/machine/include/imx-base.inc | 360 +++++++++---------
conf/machine/include/imx8dxl-evk.inc | 4 +-
conf/machine/include/imx8mm-evk.inc | 26 +-
conf/machine/include/imx8mn-evk.inc | 26 +-
conf/machine/include/imx8mp-evk.inc | 24 +-
conf/machine/include/imx8x-mek.inc | 6 +-
conf/machine/include/qoriq-base.inc | 8 +-
conf/machine/include/utilities.inc | 2 +-
conf/machine/ls1028ardb.conf | 2 +-
conf/machine/ls1043ardb.conf | 2 +-
conf/machine/ls1046afrwy.conf | 2 +-
conf/machine/ls1046ardb.conf | 2 +-
.../wayland/weston-init.bbappend | 2 +-
.../recipes-browser/chromium/chromium-imx.inc | 4 +-
.../clutter/clutter-1.0_%.bbappend | 2 +-
.../recipes-graphics/cogl/cogl-1.0_%.bbappend | 2 +-
.../wayland/weston-init.bbappend | 2 +-
.../glmark2/glmark2_%.bbappend | 8 +-
.../recipes-devtools/luajit/luajit_%.bbappend | 4 +-
.../recipes-dpaa/fmc/fmc_git.bb | 18 +-
.../xserver-common/xserver-common_%.bbappend | 6 +-
.../recipes-qt4/qt4/qt4-imx-support.inc | 12 +-
.../recipes-qt/qt5/qtbase_%.bbappend | 26 +-
.../recipes-qt/qt5/qtwayland_%.bbappend | 8 +-
.../libvirt/libvirt_%.bbappend | 6 +-
recipes-bsp/alsa-state/alsa-state.bbappend | 16 +-
recipes-bsp/atf/qoriq-atf_1.5.bb | 18 +-
recipes-bsp/atf/qoriq-atf_2.3.bb | 2 +-
.../firmware-imx/firmware-imx-8_8.12.bb | 4 +-
recipes-bsp/firmware-imx/firmware-imx_8.12.bb | 2 +-
recipes-bsp/firmware-qca/qca-tools_3.0.2.bb | 4 +-
recipes-bsp/formfactor/formfactor_%.bbappend | 2 +-
recipes-bsp/imx-atf/imx-atf_2.4.bb | 2 +-
recipes-bsp/imx-lib/imx-lib_git.bb | 18 +-
recipes-bsp/imx-mkimage/imx-boot_1.0.bb | 32 +-
recipes-bsp/imx-mkimage/imx-mkimage_git.bb | 6 +-
.../imx-sc-firmware/imx-sc-firmware_1.9.0.bb | 8 +-
recipes-bsp/imx-test/imx-test_git.bb | 28 +-
.../imx-vpu-hantro-daemon_1.0.0.bb | 8 +-
.../imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb | 6 +-
recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb | 2 +-
.../libimxdmabuffer/libimxdmabuffer_1.0.1.bb | 14 +-
recipes-bsp/mc-utils/mc-utils_git.bb | 10 +-
recipes-bsp/rcw/rcw_git.bb | 6 +-
recipes-bsp/u-boot/libubootenv_%.bbappend | 4 +-
.../u-boot/u-boot-fslc-mfgtool_2021.07.bb | 2 +-
recipes-bsp/u-boot/u-boot-fslc_2021.07.bb | 4 +-
.../u-boot/u-boot-imx-mfgtool_2021.04.bb | 2 +-
recipes-bsp/u-boot/u-boot-imx_2021.04.bb | 2 +-
recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb | 18 +-
.../iproute2/iproute2_%.bbappend | 2 +-
.../openssl/openssl_%.bbappend | 6 +-
.../init-ifupdown/init-ifupdown_%.bbappend | 2 +-
recipes-core/udev/udev-rules-qoriq.bb | 6 +-
recipes-devtools/qemu/qemu-qoriq_4.1.0.bb | 8 +-
recipes-devtools/qemu/qemu.inc | 12 +-
recipes-dpaa/fm-ucode/fm-ucode_git.bb | 14 +-
recipes-dpaa2/aiopsl/aiopsl_git.bb | 4 +-
.../management-complex_10.14.1.bb | 8 +-
.../management-complex_10.20.4.bb | 8 +-
.../management-complex_10.24.0.bb | 10 +-
recipes-extended/dpdk/dpdk.inc | 18 +-
recipes-extended/dpdk/dpdk_19.11-20.12.bb | 2 +-
recipes-extended/jailhouse/jailhouse_0.12.bb | 6 +-
recipes-extended/odp/odp-counters_git.bb | 2 +-
recipes-extended/odp/odp-module_git.bb | 2 +-
recipes-extended/odp/odp.inc | 2 +-
recipes-extended/odp/odp_git.bb | 18 +-
recipes-extended/procps/procps_%.bbappend | 2 +-
recipes-extended/testfloat/testfloat_2a.bb | 2 +-
recipes-extended/tsntool/tsntool_git.bb | 2 +-
.../packagegroups/packagegroup-fsl-isp.bb | 2 +-
.../packagegroups/packagegroup-fsl-qca6174.bb | 2 +-
.../packagegroups/packagegroup-fsl-qca9377.bb | 2 +-
recipes-graphics/cairo/cairo_%.bbappend | 4 +-
recipes-graphics/drm/libdrm_2.4.102.imx.bb | 6 +-
recipes-graphics/gtk+/gtk+3_%.bbappend | 4 +-
.../images/core-image-weston.bbappend | 2 +-
.../imx-gpu-apitrace_9.0.0.bb | 8 +-
.../imx-gpu-viv/imx-gpu-viv-6.inc | 44 +--
.../libepoxy/libepoxy_1.5.%.bbappend | 2 +-
recipes-graphics/libsdl2/libsdl2_%.bbappend | 4 +-
recipes-graphics/mesa/mesa-demos_%.bbappend | 16 +-
recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb | 2 +-
recipes-graphics/mesa/mesa-gl_%.bbappend | 2 +-
recipes-graphics/mesa/mesa_%.bbappend | 22 +-
.../vulkan/vulkan-loader_%.bbappend | 2 +-
recipes-graphics/waffle/waffle_%.bbappend | 10 +-
recipes-graphics/wayland/weston-init.bbappend | 26 +-
recipes-graphics/wayland/weston_9.0.0.imx.bb | 26 +-
.../pointercal-xinput_%.bbappend | 2 +-
.../xf86-video-imx-vivante_6.4.0.p0.0.bb | 2 +-
.../xserver-xf86-config_%.bbappend | 2 +-
.../xorg-xserver/xserver-xorg_%.bbappend | 14 +-
recipes-graphics/xwayland/xwayland_%.bbappend | 6 +-
recipes-kernel/ceetm/ceetm_git.bb | 2 +-
.../kernel-modules/kernel-module-ar_git.bb | 2 +-
.../kernel-modules/kernel-module-ipc.inc | 2 +-
.../kernel-module-qcacld-lea.inc | 2 +-
.../linux/linux-fslc-lts-mfgtool_5.10.bb | 2 +-
.../linux/linux-fslc-mfgtool_5.12.bb | 2 +-
| 2 +-
.../linux/linux-imx-mfgtool_5.10.bb | 2 +-
recipes-kernel/linux/linux-qoriq.inc | 16 +-
recipes-multimedia/alsa/alsa-lib_%.bbappend | 6 +-
.../gstreamer/gstreamer1.0-libav_1.16.0.bb | 8 +-
.../gstreamer1.0-plugins-bad_1.16.3.imx.bb | 16 +-
.../gstreamer1.0-plugins-base_1.16.%.bbappend | 6 +-
.../gstreamer1.0-plugins-base_1.16.2.imx.bb | 2 +-
.../gstreamer1.0-plugins-good_1.16.%.bbappend | 6 +-
.../gstreamer1.0-plugins-imx_2.0.0.bb | 16 +-
.../gstreamer/imx-gst1.0-plugin_4.5.7.bb | 24 +-
.../imx-codec/imx-codec_4.5.7.bb | 6 +-
.../imx-vpuwrap/imx-vpuwrap_4.5.7.bb | 4 +-
.../libimxvpuapi/libimxvpuapi2_2.2.0.bb | 8 +-
.../pulseaudio/pulseaudio_%.bbappend | 18 +-
.../optee-imx/optee-client_3.10.0.imx.bb | 4 +-
.../optee-imx/optee-os_3.10.0.imx.bb | 30 +-
.../optee-imx/optee-test_3.10.0.imx.bb | 6 +-
.../optee/optee-os-qoriq_3.8.0.bb | 12 +-
.../0001-Use-Os-to-compile-tinyxml2.cpp.patch | 6 +-
recipes-support/opencv/opencv_4.5.2.imx.bb | 36 +-
155 files changed, 762 insertions(+), 762 deletions(-)
diff --git a/classes/fsl-eula-unpack.bbclass b/classes/fsl-eula-unpack.bbclass
index 498d7826d9cf..5690898c5a43 100644
--- a/classes/fsl-eula-unpack.bbclass
+++ b/classes/fsl-eula-unpack.bbclass
@@ -79,11 +79,11 @@ FSL_EULA_FILE_MD5SUM ?= \
LIC_FILES_CHKSUM_LAYER ?= "file://${FSL_EULA_FILE};md5=${FSL_EULA_FILE_MD5SUM}"
LIC_FILES_CHKSUM_LAYER[vardepsexclude] += "FSL_EULA_FILE"
-LIC_FILES_CHKSUM_append = " ${LIC_FILES_CHKSUM_LAYER}"
+LIC_FILES_CHKSUM:append = " ${LIC_FILES_CHKSUM_LAYER}"
LIC_FILES_CHKSUM[vardepsexclude] += "FSL_EULA_FILE"
-do_fetch_prepend() {
+do_fetch:prepend() {
if "Proprietary" not in d.getVar("LICENSE"):
bb.fatal("The recipe LICENSE should include Proprietary but is " + d.getVar("LICENSE") + ".")
}
diff --git a/classes/fsl-u-boot-localversion.bbclass b/classes/fsl-u-boot-localversion.bbclass
index 617aae1de215..ebde8ea718f2 100644
--- a/classes/fsl-u-boot-localversion.bbclass
+++ b/classes/fsl-u-boot-localversion.bbclass
@@ -14,7 +14,7 @@ LOCALVERSION ??= "+fslc"
UBOOT_LOCALVERSION = "${LOCALVERSION}"
-do_compile_prepend() {
+do_compile:prepend() {
if [ "${SCMVERSION}" = "y" ]; then
# Add GIT revision to the local version
head=`cd ${S} ; git rev-parse --verify --short HEAD 2> /dev/null`
diff --git a/classes/fsl-vivante-kernel-driver-handler.bbclass b/classes/fsl-vivante-kernel-driver-handler.bbclass
index 8ac8a33445d2..7ba597f1963e 100644
--- a/classes/fsl-vivante-kernel-driver-handler.bbclass
+++ b/classes/fsl-vivante-kernel-driver-handler.bbclass
@@ -49,7 +49,7 @@ python fsl_vivante_kernel_driver_handler () {
addhandler fsl_vivante_kernel_driver_handler
fsl_vivante_kernel_driver_handler[eventmask] = "bb.event.RecipePreFinalise"
-do_configure_append () {
+do_configure:append () {
if [ "${MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT}" = "1" ]; then
config="${B}/.config"
diff --git a/classes/image_types_fsl.bbclass b/classes/image_types_fsl.bbclass
index c49c51b7a348..d6d8da95fd3b 100644
--- a/classes/image_types_fsl.bbclass
+++ b/classes/image_types_fsl.bbclass
@@ -37,7 +37,7 @@ do_image_wic[depends] += " \
"
# We need to apply a fixup inside of the partition table
-IMAGE_CMD_wic_append_mxs() {
+IMAGE_CMD_wic:append:mxs() {
# Change partition type for mxs processor family
bbnote "Setting partition type to 0x53 as required for mxs' SoC family."
echo -n S | dd of=$out${IMAGE_NAME_SUFFIX}.wic bs=1 count=1 seek=450 conv=notrunc
diff --git a/classes/imx-boot-container.bbclass b/classes/imx-boot-container.bbclass
index 41fe9cca739a..33de45c52b28 100644
--- a/classes/imx-boot-container.bbclass
+++ b/classes/imx-boot-container.bbclass
@@ -23,7 +23,7 @@
# Define ATF binary file to be deployed to the U-Boot build folder
ATF_MACHINE_NAME = "bl31-${ATF_PLATFORM}.bin"
-ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
+ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
# This package aggregates output deployed by other packages, so set the
# appropriate dependencies for populate binaries task
@@ -76,7 +76,7 @@ addtask do_resolve_and_populate_binaries before do_compile after do_configure
# This effectively would allow the usage of the same WKS file for those
# derivatives that are using the boot container from U-Boot and those
# that are not yet have support for it enabled.
-do_deploy_append() {
+do_deploy:append() {
# Deploy the resulted flash.bin for WIC to pick it up
if [ -n "${UBOOT_CONFIG}" ]; then
for config in ${UBOOT_MACHINE}; do
diff --git a/classes/kernel-imximage.bbclass b/classes/kernel-imximage.bbclass
index 234cc00d3059..ccf7ec53bf45 100644
--- a/classes/kernel-imximage.bbclass
+++ b/classes/kernel-imximage.bbclass
@@ -17,7 +17,7 @@
#
# Copyright 2017 (C) O.S. Systems Software LTDA.
-DEPENDS_append = ' u-boot-mkimage-native'
+DEPENDS:append = ' u-boot-mkimage-native'
IMXIMAGE_ENTRYPOINT ?= "${UBOOT_ENTRYPOINT}"
@@ -55,6 +55,6 @@ gen_imximage() {
done
}
-do_deploy_append() {
+do_deploy:append() {
gen_imximage
}
diff --git a/classes/kernel-itbimage.bbclass b/classes/kernel-itbimage.bbclass
index 84262879c09b..51a87319ce94 100644
--- a/classes/kernel-itbimage.bbclass
+++ b/classes/kernel-itbimage.bbclass
@@ -459,7 +459,7 @@ addtask assemble_fitimage_initramfs before do_deploy after do_install
kernel_do_deploy[vardepsexclude] = "DATETIME"
-kernel_do_deploy_append() {
+kernel_do_deploy:append() {
# Update deploy directory
if echo ${KERNEL_IMAGETYPES} | grep -wq "itbImage"; then
cd ${B}
diff --git a/classes/mfgtool-initramfs-image.bbclass b/classes/mfgtool-initramfs-image.bbclass
index 65028b8faa88..1d4c55131d67 100644
--- a/classes/mfgtool-initramfs-image.bbclass
+++ b/classes/mfgtool-initramfs-image.bbclass
@@ -13,7 +13,7 @@ FEATURE_PACKAGES_extfs = "packagegroup-fsl-mfgtool-extfs"
FEATURE_PACKAGES_f2fs = "packagegroup-fsl-mfgtool-f2fs"
IMAGE_FSTYPES = "cpio.gz.u-boot"
-IMAGE_FSTYPES_mxs = "cpio.gz.u-boot"
+IMAGE_FSTYPES:mxs = "cpio.gz.u-boot"
IMAGE_ROOTFS_SIZE ?= "8192"
# Filesystems enabled by default
diff --git a/classes/qoriq_build_64bit_kernel.bbclass b/classes/qoriq_build_64bit_kernel.bbclass
index 93b4d412ff3c..7014be91cc1f 100644
--- a/classes/qoriq_build_64bit_kernel.bbclass
+++ b/classes/qoriq_build_64bit_kernel.bbclass
@@ -6,8 +6,8 @@ python () {
if promote_kernel == "1":
sys_multilib = 'powerpc64' + d.getVar('TARGET_VENDOR', False) + 'mllib64-' + d.getVar('HOST_OS', False)
tc_options = d.getVar('TOOLCHAIN_OPTIONS', False) + '/../lib64-' + d.getVar("MACHINE", False)
- d.setVar('DEPENDS_append', ' lib64-gcc-cross-powerpc64 lib64-libgcc')
- d.setVar('PATH_append', ':' + d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
+ d.setVar('DEPENDS:append', ' lib64-gcc-cross-powerpc64 lib64-libgcc')
+ d.setVar('PATH:append', ':' + d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
d.setVar('KERNEL_CC', d.getVar('CCACHE', False) + sys_multilib + '-' + 'gcc' + d.getVar('HOST_CC_KERNEL_ARCH', False) + tc_options)
d.setVar('KERNEL_LD', d.getVar('CCACHE', False) + sys_multilib + '-' + 'ld.bfd' + d.getVar('HOST_LD_KERNEL_ARCH', False) + tc_options)
d.setVar('KERNEL_AR', d.getVar('CCACHE', False) + sys_multilib + '-' + 'ar' + d.getVar('HOST_AR_KERNEL_ARCH', False))
--git a/classes/use-imx-headers.bbclass b/classes/use-imx-headers.bbclass
index fcec68c8b3e0..b03d37413504 100644
--- a/classes/use-imx-headers.bbclass
+++ b/classes/use-imx-headers.bbclass
@@ -13,14 +13,14 @@
#
# Copyright 2018 (C) O.S. Systems Software LTDA.
-DEPENDS_append_imx = " linux-imx-headers"
+DEPENDS:append:imx = " linux-imx-headers"
# Set runtime dependency of -dev for package inheriting this class to
# linux-imx-headers-dev package. This is required in order to propagate
# headers into the SDK
RDEPENDS_${PN}-dev += "linux-imx-headers-dev"
-PACKAGE_ARCH_imx ?= "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:imx ?= "${MACHINE_SOCARCH}"
STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
@@ -34,4 +34,4 @@ STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
# Typical example here would be imx-vpu-hantro recipe, which requires NXP
# BSP and is not compatible with mainline.
COMPATIBLE_HOST = '(null)'
-COMPATIBLE_HOST_use-nxp-bsp = '.*'
+COMPATIBLE_HOST:use-nxp-bsp = '.*'
diff --git a/classes/use-imx-security-controller-firmware.bbclass b/classes/use-imx-security-controller-firmware.bbclass
index 7c79fc62bbd5..9650059b5066 100644
--- a/classes/use-imx-security-controller-firmware.bbclass
+++ b/classes/use-imx-security-controller-firmware.bbclass
@@ -18,11 +18,11 @@
SECO_FIRMWARE_NAME ?= ""
-SECO_FIRMWARE_NAME_mx8qm = "mx8qmb0-ahab-container.img"
-SECO_FIRMWARE_NAME_mx8qxp = \
+SECO_FIRMWARE_NAME:mx8qm = "mx8qmb0-ahab-container.img"
+SECO_FIRMWARE_NAME:mx8qxp = \
"${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', 'mx8qxb0-ahab-container.img', \
'mx8qxc0-ahab-container.img', d)}"
-SECO_FIRMWARE_NAME_mx8dxl = "mx8dxla1-ahab-container.img"
+SECO_FIRMWARE_NAME:mx8dxl = "mx8dxla1-ahab-container.img"
python () {
if "mx8m" in d.getVar('MACHINEOVERRIDES').split(":"):
diff --git a/conf/layer.conf b/conf/layer.conf
index e07b65ab77f4..4487de9cc445 100644
--- a/conf/layer.conf
+++ b/conf/layer.conf
@@ -8,7 +8,7 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
BBFILE_COLLECTIONS += "freescale-layer"
BBFILE_PATTERN_freescale-layer := "^${LAYERDIR}/"
BBFILE_PRIORITY_freescale-layer = "5"
-LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott"
+LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott honister"
# Add the Freescale-specific licenses into the metadata
LICENSE_PATH += "${LAYERDIR}/custom-licenses"
diff --git a/conf/machine/imx6qdlsabreauto.conf b/conf/machine/imx6qdlsabreauto.conf
index b7aec8c257ee..0b5274cb8149 100644
--- a/conf/machine/imx6qdlsabreauto.conf
+++ b/conf/machine/imx6qdlsabreauto.conf
@@ -26,7 +26,7 @@ KERNEL_DEVICETREE = " \
imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb imx6dl-sabreauto-ecspi.dtb \
imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb \
"
-KERNEL_DEVICETREE_use-mainline-bsp = " \
+KERNEL_DEVICETREE:use-mainline-bsp = " \
imx6qp-sabreauto.dtb \
imx6q-sabreauto.dtb \
imx6dl-sabreauto.dtb \
@@ -34,18 +34,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
### u-boot-fslc settings ###
-SPL_BINARY_pn-u-boot-fslc = "SPL"
-UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
-UBOOT_SUFFIX_pn-u-boot-fslc = "img"
+SPL_BINARY:pn-u-boot-fslc = "SPL"
+UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
+UBOOT_SUFFIX:pn-u-boot-fslc = "img"
### u-boot-imx settings ###
# The u-boot-imx does not provide unified functionality for DL/Q/QP SoC
# variants. Change the defconfig to the targeted SoC variant.
-SPL_BINARY_pn-u-boot-imx = ""
-UBOOT_MACHINE_pn-u-boot-imx = "mx6qsabreauto_defconfig"
-UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
-UBOOT_SUFFIX_pn-u-boot-imx = "imx"
+SPL_BINARY:pn-u-boot-imx = ""
+UBOOT_MACHINE:pn-u-boot-imx = "mx6qsabreauto_defconfig"
+UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
+UBOOT_SUFFIX:pn-u-boot-imx = "imx"
WKS_FILE = " \
${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
@@ -54,6 +54,6 @@ WKS_FILE = " \
SERIAL_CONSOLES = "115200;ttymxc3"
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/imx6qdlsabresd.conf b/conf/machine/imx6qdlsabresd.conf
index b3d09e9397cb..27a2e9d7fa7f 100644
--- a/conf/machine/imx6qdlsabresd.conf
+++ b/conf/machine/imx6qdlsabresd.conf
@@ -35,7 +35,7 @@ KERNEL_DEVICETREE = " \
imx6dl-sabresd-hdcp.dtb \
imx6dl-sabresd-ldo.dtb \
"
-KERNEL_DEVICETREE_use-mainline-bsp = " \
+KERNEL_DEVICETREE:use-mainline-bsp = " \
imx6qp-sabresd.dtb \
imx6q-sabresd.dtb \
imx6dl-sabresd.dtb \
@@ -43,18 +43,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
### u-boot-fslc settings ###
-SPL_BINARY_pn-u-boot-fslc = "SPL"
-UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
-UBOOT_SUFFIX_pn-u-boot-fslc = "img"
+SPL_BINARY:pn-u-boot-fslc = "SPL"
+UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
+UBOOT_SUFFIX:pn-u-boot-fslc = "img"
### u-boot-imx settings ###
# The u-boot-imx does not provide unified functionality for DL/Q/QP SoC
# variants. Change the defconfig to the targeted SoC variant.
-SPL_BINARY_pn-u-boot-imx = ""
-UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
-UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
-UBOOT_SUFFIX_pn-u-boot-imx = "imx"
+SPL_BINARY:pn-u-boot-imx = ""
+UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
+UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
+UBOOT_SUFFIX:pn-u-boot-imx = "imx"
WKS_FILE = " \
${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
@@ -63,6 +63,6 @@ WKS_FILE = " \
SERIAL_CONSOLES = "115200;ttymxc0"
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
index 1e8c403b7cde..8bef21b680b4 100644
--- a/conf/machine/imx6slevk.conf
+++ b/conf/machine/imx6slevk.conf
@@ -10,7 +10,7 @@ include conf/machine/include/imx-base.inc
include conf/machine/include/tune-cortexa9.inc
KERNEL_DEVICETREE = "imx6sl-evk.dtb"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
imx6sl-evk-btwifi.dtb \
imx6sl-evk-csi.dtb \
imx6sl-evk-ldo.dtb \
diff --git a/conf/machine/imx6sllevk.conf b/conf/machine/imx6sllevk.conf
index 30b537f18666..6282533aa4f1 100644
--- a/conf/machine/imx6sllevk.conf
+++ b/conf/machine/imx6sllevk.conf
@@ -23,7 +23,7 @@ UBOOT_CONFIG[sd-optee] = "mx6sllevk_optee_config,sdcard"
UBOOT_CONFIG[epdc] = "mx6sllevk_epdc_config"
UBOOT_CONFIG[mfgtool] = "mx6sllevk_config"
-OPTEE_BIN_EXT_imx6sllevk = "6sllevk"
+OPTEE_BIN_EXT:imx6sllevk = "6sllevk"
SERIAL_CONSOLES = "115200;ttymxc0"
diff --git a/conf/machine/imx6sxsabreauto.conf b/conf/machine/imx6sxsabreauto.conf
index f7031ccb1134..2354635e2b33 100644
--- a/conf/machine/imx6sxsabreauto.conf
+++ b/conf/machine/imx6sxsabreauto.conf
@@ -10,7 +10,7 @@ require conf/machine/include/imx-base.inc
require conf/machine/include/tune-cortexa9.inc
KERNEL_DEVICETREE = "imx6sx-sabreauto.dtb"
-KERNEL_DEVICETREE_use-mainline-bsp = "imx6sx-sabreauto.dtb"
+KERNEL_DEVICETREE:use-mainline-bsp = "imx6sx-sabreauto.dtb"
UBOOT_MAKE_TARGET = "u-boot.imx"
UBOOT_SUFFIX = "imx"
@@ -29,6 +29,6 @@ OPTEE_BIN_EXT = "6sxauto"
SERIAL_CONSOLES = "115200;ttymxc3"
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
MACHINE_FEATURES += " pci wifi bluetooth"
diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
index ff7d6ae62d03..fcfcbd5f41c7 100644
--- a/conf/machine/imx6sxsabresd.conf
+++ b/conf/machine/imx6sxsabresd.conf
@@ -14,7 +14,7 @@ KERNEL_DEVICETREE = " \
imx6sx-sdb-reva.dtb \
imx6sx-sdb-sai.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
imx6sx-sdb-btwifi.dtb \
imx6sx-sdb-emmc.dtb \
imx6sx-sdb-lcdif1.dtb \
@@ -43,6 +43,6 @@ OPTEE_BIN_EXT = "6sxsdb"
SERIAL_CONSOLES = "115200;ttymxc0"
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
+MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
diff --git a/conf/machine/imx6ulevk.conf b/conf/machine/imx6ulevk.conf
index f7c5d8ae52df..6fd14456fb29 100644
--- a/conf/machine/imx6ulevk.conf
+++ b/conf/machine/imx6ulevk.conf
@@ -21,19 +21,19 @@ KERNEL_DEVICETREE = " \
imx6ul-14x14-evk-emmc.dtb \
imx6ul-14x14-evk-gpmi-weim.dtb \
"
-KERNEL_DEVICETREE_use-mainline-bsp = "imx6ul-14x14-evk.dtb"
+KERNEL_DEVICETREE:use-mainline-bsp = "imx6ul-14x14-evk.dtb"
### u-boot-fslc settings ###
-SPL_BINARY_pn-u-boot-fslc = "SPL"
-UBOOT_SUFFIX_pn-u-boot-fslc = "img"
+SPL_BINARY:pn-u-boot-fslc = "SPL"
+UBOOT_SUFFIX:pn-u-boot-fslc = "img"
### u-boot-imx settings ###
# The u-boot-imx does not provide SPL support
-SPL_BINARY_pn-u-boot-imx = ""
-UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
-UBOOT_SUFFIX_pn-u-boot-imx = "imx"
+SPL_BINARY:pn-u-boot-imx = ""
+UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
+UBOOT_SUFFIX:pn-u-boot-imx = "imx"
WKS_FILE = " \
${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
diff --git a/conf/machine/imx6ullevk.conf b/conf/machine/imx6ullevk.conf
index bd592a20bf43..f5b7309fbe6b 100644
--- a/conf/machine/imx6ullevk.conf
+++ b/conf/machine/imx6ullevk.conf
@@ -15,7 +15,7 @@ KERNEL_DEVICETREE = " \
imx6ull-14x14-evk.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
imx6ull-14x14-evk-btwifi.dtb \
imx6ull-14x14-evk-btwifi-oob.dtb \
imx6ull-14x14-evk-emmc.dtb \
diff --git a/conf/machine/imx6ulz-14x14-evk.conf b/conf/machine/imx6ulz-14x14-evk.conf
index 7b794e7ccb13..a27f1ef11277 100644
--- a/conf/machine/imx6ulz-14x14-evk.conf
+++ b/conf/machine/imx6ulz-14x14-evk.conf
@@ -14,7 +14,7 @@ MACHINE_FEATURES += "wifi bluetooth bcm4339 bcm43455"
KERNEL_DEVICETREE = " \
imx6ulz-14x14-evk.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
imx6ulz-14x14-evk-btwifi.dtb \
imx6ulz-14x14-evk-emmc.dtb \
imx6ulz-14x14-evk-gpmi-weim.dtb \
diff --git a/conf/machine/imx7dsabresd.conf b/conf/machine/imx7dsabresd.conf
index e848f294395f..860c8007f711 100644
--- a/conf/machine/imx7dsabresd.conf
+++ b/conf/machine/imx7dsabresd.conf
@@ -12,7 +12,7 @@ require conf/machine/include/tune-cortexa7.inc
MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
KERNEL_DEVICETREE = "imx7d-sdb.dtb"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
imx7d-sdb-epdc.dtb \
imx7d-sdb-gpmi-weim.dtb \
imx7d-sdb-m4.dtb \
diff --git a/conf/machine/imx7ulpevk.conf b/conf/machine/imx7ulpevk.conf
index a587f44b388c..d685a90caca2 100644
--- a/conf/machine/imx7ulpevk.conf
+++ b/conf/machine/imx7ulpevk.conf
@@ -14,10 +14,10 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43430"
KERNEL_DEVICETREE = " \
imx7ulp-evk.dtb \
"
-KERNEL_DEVICETREE_append_use-mainline-bsp = " \
+KERNEL_DEVICETREE:append:use-mainline-bsp = " \
imx7ulp-com.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
imx7ulp-evk-ft5416.dtb \
imx7ulp-evk-mipi.dtb \
imx7ulp-evkb.dtb \
diff --git a/conf/machine/imx8dxl-lpddr4-evk.conf b/conf/machine/imx8dxl-lpddr4-evk.conf
index 1ea5260bb2c9..d44a4732128a 100644
--- a/conf/machine/imx8dxl-lpddr4-evk.conf
+++ b/conf/machine/imx8dxl-lpddr4-evk.conf
@@ -5,7 +5,7 @@
require conf/machine/include/imx8dxl-evk.inc
KERNEL_DEVICETREE_BASENAME = "imx8dxl-evk"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-enet0.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-enet0-tja1100.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
diff --git a/conf/machine/imx8mm-ddr4-evk.conf b/conf/machine/imx8mm-ddr4-evk.conf
index 3901bb92c3a0..f21cc38148b9 100644
--- a/conf/machine/imx8mm-ddr4-evk.conf
+++ b/conf/machine/imx8mm-ddr4-evk.conf
@@ -7,7 +7,7 @@
require include/imx8mm-evk.inc
KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-revb-rm67191.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-revb.dtb \
"
diff --git a/conf/machine/imx8mm-lpddr4-evk.conf b/conf/machine/imx8mm-lpddr4-evk.conf
index 6007c5404fc1..0a85ed20ac81 100644
--- a/conf/machine/imx8mm-lpddr4-evk.conf
+++ b/conf/machine/imx8mm-lpddr4-evk.conf
@@ -8,7 +8,7 @@ require include/imx8mm-evk.inc
# The device tree name is implicit for LPDDR4, so can't use MACHINE here
KERNEL_DEVICETREE_BASENAME = "imx8mm-evk"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-swpdm.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-ak4497.dtb \
diff --git a/conf/machine/imx8mn-ddr4-evk.conf b/conf/machine/imx8mn-ddr4-evk.conf
index 442afdbd0547..d004d2aecb3b 100644
--- a/conf/machine/imx8mn-ddr4-evk.conf
+++ b/conf/machine/imx8mn-ddr4-evk.conf
@@ -7,7 +7,7 @@
require include/imx8mn-evk.inc
KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-usd-wifi.dtb \
"
UBOOT_CONFIG_BASENAME = "imx8mn_ddr4_evk"
diff --git a/conf/machine/imx8mn-lpddr4-evk.conf b/conf/machine/imx8mn-lpddr4-evk.conf
index 7c58bc19f8a2..2e5e6be9aa21 100644
--- a/conf/machine/imx8mn-lpddr4-evk.conf
+++ b/conf/machine/imx8mn-lpddr4-evk.conf
@@ -8,7 +8,7 @@ require include/imx8mn-evk.inc
# The device tree name is implicit for LPDDR4, so can't use MACHINE here
KERNEL_DEVICETREE_BASENAME = "imx8mn-evk"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
"
UBOOT_CONFIG_BASENAME = "imx8mn_evk"
diff --git a/conf/machine/imx8mp-ddr4-evk.conf b/conf/machine/imx8mp-ddr4-evk.conf
index 09517769f00b..78e0c1608152 100644
--- a/conf/machine/imx8mp-ddr4-evk.conf
+++ b/conf/machine/imx8mp-ddr4-evk.conf
@@ -8,7 +8,7 @@ require include/imx8mp-evk.inc
# FIXME: This machine is not yet supported by u-boot-fslc, so for now
# use u-boot-imx for mainline.
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-imx"
KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
diff --git a/conf/machine/imx8mp-lpddr4-evk.conf b/conf/machine/imx8mp-lpddr4-evk.conf
index cf926c08d0a1..76a1f44990fe 100644
--- a/conf/machine/imx8mp-lpddr4-evk.conf
+++ b/conf/machine/imx8mp-lpddr4-evk.conf
@@ -11,7 +11,7 @@ KERNEL_DEVICETREE_BASENAME = "imx8mp-evk"
# NXP kernel has additional DTB files for various board configuration and
# derivates. Include them here for NXP BSP only
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/imx8mp-ab2.dtb \
freescale/imx8mp-evk-basler.dtb \
freescale/imx8mp-evk-basler-ov2775.dtb \
diff --git a/conf/machine/imx8mq-evk.conf b/conf/machine/imx8mq-evk.conf
index 9907ef4b26c2..b6dcd89026bb 100644
--- a/conf/machine/imx8mq-evk.conf
+++ b/conf/machine/imx8mq-evk.conf
@@ -12,14 +12,14 @@ require conf/machine/include/tune-cortexa53.inc
IMX_DEFAULT_BSP = "nxp"
MACHINE_FEATURES += "pci wifi bluetooth optee bcm43455 bcm4356"
-MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
+MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
-MACHINE_SOCARCH_FILTER_append_mx8mq = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d"
+MACHINE_SOCARCH_FILTER:append:mx8mq = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d"
KERNEL_DEVICETREE = " \
freescale/imx8mq-evk.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/imx8mq-evk-ak4497.dtb \
freescale/imx8mq-evk-audio-tdm.dtb \
freescale/imx8mq-evk-dcss-adv7535.dtb \
@@ -40,8 +40,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
freescale/imx8mq-evk-usdhc2-m2.dtb \
"
-IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
UBOOT_SUFFIX = "bin"
@@ -77,7 +77,7 @@ IMX_BOOT_SEEK = "33"
OPTEE_BIN_EXT = "8mq"
# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
# Use gstreamer 1.16 from meta-freescale
PREFERRED_VERSION_gstreamer1.0 ?= "1.16.imx"
diff --git a/conf/machine/imx8qm-mek.conf b/conf/machine/imx8qm-mek.conf
index 5ceb6b8bb2f7..655c453f6262 100644
--- a/conf/machine/imx8qm-mek.conf
+++ b/conf/machine/imx8qm-mek.conf
@@ -11,7 +11,7 @@ require conf/machine/include/tune-cortexa72-cortexa53.inc
IMX_DEFAULT_BSP = "nxp"
MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
-MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
+MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
# Don't include kernels in standard images
RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
@@ -55,8 +55,8 @@ UBOOT_MAKE_TARGET = \
SPL_BINARY = \
"${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
'', d)}"
-IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
UBOOT_SUFFIX = "bin"
@@ -86,4 +86,4 @@ IMX_BOOT_SOC_TARGET = "iMX8QM"
BOARD_TYPE = "mek"
# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
diff --git a/conf/machine/imx8qxp-mek.conf b/conf/machine/imx8qxp-mek.conf
index 5b29138fc3fd..29412cc35bc9 100644
--- a/conf/machine/imx8qxp-mek.conf
+++ b/conf/machine/imx8qxp-mek.conf
@@ -8,7 +8,7 @@ MACHINEOVERRIDES =. "mx8qxp:"
require include/imx8x-mek.inc
KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-a0.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-dom0.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-dpu-lcdif.dtb \
diff --git a/conf/machine/include/imx-base.inc b/conf/machine/include/imx-base.inc
index f92a08af1c00..78f815d1310d 100644
--- a/conf/machine/include/imx-base.inc
+++ b/conf/machine/include/imx-base.inc
@@ -13,8 +13,8 @@ require conf/machine/include/utilities.inc
IMX_DEFAULT_BSP ?= "mainline"
# Those are SoC families we'd like to force the use of mainline BSP.
-IMX_DEFAULT_BSP_mxs ?= "mainline"
-IMX_DEFAULT_BSP_mx5 ?= "mainline"
+IMX_DEFAULT_BSP:mxs ?= "mainline"
+IMX_DEFAULT_BSP:mx5 ?= "mainline"
MACHINEOVERRIDES =. "use-${IMX_DEFAULT_BSP}-bsp:"
@@ -32,16 +32,16 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
# ,----[ imx6qdlsabresd.conf ]
# | ### u-boot-fslc settings ###
# |
-# | SPL_BINARY_pn-u-boot-fslc = "SPL"
-# | UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
-# | UBOOT_SUFFIX_pn-u-boot-fslc = "img"
+# | SPL_BINARY:pn-u-boot-fslc = "SPL"
+# | UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
+# | UBOOT_SUFFIX:pn-u-boot-fslc = "img"
# |
# | ### u-boot-imx settings ###
# |
# | # The u-boot-imx does not provide unified functionality for DL/Q/QP SoC
# | # variants. Change the defconfig to the targeted SoC variant.
-# | UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
-# | UBOOT_SUFFIX_pn-u-boot-imx = "imx"
+# | UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
+# | UBOOT_SUFFIX:pn-u-boot-imx = "imx"
# `----
#
# As result, the 'UBOOT_SUFFIX' is dynamically set based on the preferred U-Boot
@@ -61,7 +61,7 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
# | UBOOT_MACHINE = "mx53loco_config"
# `----
IMX_DEFAULT_BOOTLOADER ??= "u-boot-fslc"
-UBOOT_SUFFIX ?= "${UBOOT_SUFFIX_pn-${IMX_DEFAULT_BOOTLOADER}}"
+UBOOT_SUFFIX ?= "${UBOOT_SUFFIX:pn-${IMX_DEFAULT_BOOTLOADER}}"
# We need to export the original variable to allow it to be used when generating
# wic based images.
@@ -75,33 +75,33 @@ PREFERRED_PROVIDER_virtual/bootloader ??= "${IMX_DEFAULT_BOOTLOADER}"
PREFERRED_PROVIDER_u-boot-mxsboot-native ??= "u-boot-fslc-mxsboot-native"
-UBOOT_ENTRYPOINT_mxs = "0x40008000"
-UBOOT_ENTRYPOINT_mx51 = "0x90008000"
-UBOOT_ENTRYPOINT_mx53 = "0x70008000"
-UBOOT_ENTRYPOINT_mx6 = "0x10008000"
-UBOOT_ENTRYPOINT_mx6sl = "0x80008000"
-UBOOT_ENTRYPOINT_mx6sll = "0x80008000"
-UBOOT_ENTRYPOINT_mx6sx = "0x80008000"
-UBOOT_ENTRYPOINT_mx6ul = "0x80008000"
-UBOOT_ENTRYPOINT_mx6ull = "0x80008000"
-UBOOT_ENTRYPOINT_mx6ulz = "0x80008000"
-UBOOT_ENTRYPOINT_mx7 = "0x80008000"
-UBOOT_ENTRYPOINT_mx7ulp = "0x60008000"
-UBOOT_ENTRYPOINT_mx8m = "0x40480000"
-UBOOT_ENTRYPOINT_vf = "0x80008000"
+UBOOT_ENTRYPOINT:mxs = "0x40008000"
+UBOOT_ENTRYPOINT:mx51 = "0x90008000"
+UBOOT_ENTRYPOINT:mx53 = "0x70008000"
+UBOOT_ENTRYPOINT:mx6 = "0x10008000"
+UBOOT_ENTRYPOINT:mx6sl = "0x80008000"
+UBOOT_ENTRYPOINT:mx6sll = "0x80008000"
+UBOOT_ENTRYPOINT:mx6sx = "0x80008000"
+UBOOT_ENTRYPOINT:mx6ul = "0x80008000"
+UBOOT_ENTRYPOINT:mx6ull = "0x80008000"
+UBOOT_ENTRYPOINT:mx6ulz = "0x80008000"
+UBOOT_ENTRYPOINT:mx7 = "0x80008000"
+UBOOT_ENTRYPOINT:mx7ulp = "0x60008000"
+UBOOT_ENTRYPOINT:mx8m = "0x40480000"
+UBOOT_ENTRYPOINT:vf = "0x80008000"
# Some derivates can utilize the boot container provided by U-Boot,
# below variable sets that those machines which have a imx-boot-container
# in their MACHINEOVERRIDES can inherit a imx-boot-container class
UBOOT_PROVIDES_BOOT_CONTAINER = "0"
-UBOOT_PROVIDES_BOOT_CONTAINER_imx-boot-container = "1"
+UBOOT_PROVIDES_BOOT_CONTAINER:imx-boot-container = "1"
PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
XSERVER_DRIVER = "xf86-video-fbdev"
-XSERVER_DRIVER_imxgpu2d = "xf86-video-imx-vivante"
-XSERVER_DRIVER_vf = "xf86-video-modesetting"
-XSERVER_DRIVER_append_mx8 = " xf86-video-modesetting"
-XSERVER_DRIVER_use-mainline-bsp = " \
+XSERVER_DRIVER:imxgpu2d = "xf86-video-imx-vivante"
+XSERVER_DRIVER:vf = "xf86-video-modesetting"
+XSERVER_DRIVER:append:mx8 = " xf86-video-modesetting"
+XSERVER_DRIVER:use-mainline-bsp = " \
xf86-video-fbdev \
xf86-video-modesetting \
xserver-xorg-extension-glx \
@@ -118,41 +118,41 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
# ARM_INSTRUCTION_SET = "thumb"
#
# handled by software
-# DEFAULTTUNE_mx6 ?= "cortexa9t-neon"
+# DEFAULTTUNE:mx6 ?= "cortexa9t-neon"
# handled by hardware
-DEFAULTTUNE_mx6 ?= "cortexa9thf-neon"
-DEFAULTTUNE_mx6ul ?= "cortexa7thf-neon"
-DEFAULTTUNE_mx6ull ?= "cortexa7thf-neon"
-DEFAULTTUNE_mx6ulz ?= "cortexa7thf-neon"
-DEFAULTTUNE_mx7 ?= "cortexa7thf-neon"
-DEFAULTTUNE_vf ?= "cortexa5thf-neon"
+DEFAULTTUNE:mx6 ?= "cortexa9thf-neon"
+DEFAULTTUNE:mx6ul ?= "cortexa7thf-neon"
+DEFAULTTUNE:mx6ull ?= "cortexa7thf-neon"
+DEFAULTTUNE:mx6ulz ?= "cortexa7thf-neon"
+DEFAULTTUNE:mx7 ?= "cortexa7thf-neon"
+DEFAULTTUNE:vf ?= "cortexa5thf-neon"
-DEFAULTTUNE_mx8m ?= "cortexa53-crypto"
-DEFAULTTUNE_mx8qm ?= "cortexa72-cortexa53-crypto"
-DEFAULTTUNE_mx8qxp ?= "cortexa35-crypto"
+DEFAULTTUNE:mx8m ?= "cortexa53-crypto"
+DEFAULTTUNE:mx8qm ?= "cortexa72-cortexa53-crypto"
+DEFAULTTUNE:mx8qxp ?= "cortexa35-crypto"
INHERIT += "machine-overrides-extender"
-MACHINEOVERRIDES_EXTENDER_mx25 = "use-mainline-bsp"
-MACHINEOVERRIDES_EXTENDER_mx6q = "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx6dl = "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
-MACHINEOVERRIDES_EXTENDER_mx6sx = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx6sl = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
-MACHINEOVERRIDES_EXTENDER_mx6sll = "imxfbdev:imxpxp:imxepdc"
-MACHINEOVERRIDES_EXTENDER_mx6ul = "imxfbdev:imxpxp"
-MACHINEOVERRIDES_EXTENDER_mx6ull = "imxfbdev:imxpxp:imxepdc"
-MACHINEOVERRIDES_EXTENDER_mx6ulz = "imxfbdev:imxpxp:imxepdc"
-MACHINEOVERRIDES_EXTENDER_mx7d = "imxfbdev:imxpxp:imxepdc"
-MACHINEOVERRIDES_EXTENDER_mx7ulp = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8qm = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8mm = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8mn = "imxdrm:imxgpu:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8mp = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8qxp = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
-MACHINEOVERRIDES_EXTENDER_mx8dxl = "imxfbdev"
-
-MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp = " \
+MACHINEOVERRIDES_EXTENDER:mx25 = "use-mainline-bsp"
+MACHINEOVERRIDES_EXTENDER:mx6q = "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx6dl = "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
+MACHINEOVERRIDES_EXTENDER:mx6sx = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx6sl = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
+MACHINEOVERRIDES_EXTENDER:mx6sll = "imxfbdev:imxpxp:imxepdc"
+MACHINEOVERRIDES_EXTENDER:mx6ul = "imxfbdev:imxpxp"
+MACHINEOVERRIDES_EXTENDER:mx6ull = "imxfbdev:imxpxp:imxepdc"
+MACHINEOVERRIDES_EXTENDER:mx6ulz = "imxfbdev:imxpxp:imxepdc"
+MACHINEOVERRIDES_EXTENDER:mx7d = "imxfbdev:imxpxp:imxepdc"
+MACHINEOVERRIDES_EXTENDER:mx7ulp = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8qm = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8mm = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8mn = "imxdrm:imxgpu:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8mp = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8qxp = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
+MACHINEOVERRIDES_EXTENDER:mx8dxl = "imxfbdev"
+
+MACHINEOVERRIDES_EXTENDER_FILTER_OUT:use-mainline-bsp = " \
imx \
\
mx6 \
@@ -182,40 +182,40 @@ MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp = " \
# Sub-architecture support
MACHINE_SOCARCH_SUFFIX ?= ""
-MACHINE_SOCARCH_SUFFIX_mx6q = "-mx6qdl"
-MACHINE_SOCARCH_SUFFIX_mx6dl = "-mx6qdl"
-MACHINE_SOCARCH_SUFFIX_mx6sx = "-mx6sx"
-MACHINE_SOCARCH_SUFFIX_mx6sl = "-mx6sl"
-MACHINE_SOCARCH_SUFFIX_mx6sll= "-mx6sll"
-MACHINE_SOCARCH_SUFFIX_mx7d = "-mx7d"
-MACHINE_SOCARCH_SUFFIX_mx7ulp = "-mx7ulp"
-MACHINE_SOCARCH_SUFFIX_vf60 = "-vf60"
-MACHINE_SOCARCH_SUFFIX_vf50 = "-vf50"
-MACHINE_SOCARCH_SUFFIX_mx6ul = "-mx6ul"
-MACHINE_SOCARCH_SUFFIX_mx6ull = "-mx6ul"
-MACHINE_SOCARCH_SUFFIX_mx6ulz = "-mx6ul"
-MACHINE_SOCARCH_SUFFIX_mx8qm = "-mx8"
-MACHINE_SOCARCH_SUFFIX_mx8mm = "-mx8mm"
-MACHINE_SOCARCH_SUFFIX_mx8mn = "-mx8mn"
-MACHINE_SOCARCH_SUFFIX_mx8mp = "-mx8mp"
-MACHINE_SOCARCH_SUFFIX_mx8mq = "-mx8m"
-MACHINE_SOCARCH_SUFFIX_mx8qxp = "-mx8"
-MACHINE_SOCARCH_SUFFIX_mx8dxl = "-mx8dxl"
-MACHINE_SOCARCH_SUFFIX_use-mainline-bsp = "-imx"
+MACHINE_SOCARCH_SUFFIX:mx6q = "-mx6qdl"
+MACHINE_SOCARCH_SUFFIX:mx6dl = "-mx6qdl"
+MACHINE_SOCARCH_SUFFIX:mx6sx = "-mx6sx"
+MACHINE_SOCARCH_SUFFIX:mx6sl = "-mx6sl"
+MACHINE_SOCARCH_SUFFIX:mx6sll= "-mx6sll"
+MACHINE_SOCARCH_SUFFIX:mx7d = "-mx7d"
+MACHINE_SOCARCH_SUFFIX:mx7ulp = "-mx7ulp"
+MACHINE_SOCARCH_SUFFIX:vf60 = "-vf60"
+MACHINE_SOCARCH_SUFFIX:vf50 = "-vf50"
+MACHINE_SOCARCH_SUFFIX:mx6ul = "-mx6ul"
+MACHINE_SOCARCH_SUFFIX:mx6ull = "-mx6ul"
+MACHINE_SOCARCH_SUFFIX:mx6ulz = "-mx6ul"
+MACHINE_SOCARCH_SUFFIX:mx8qm = "-mx8"
+MACHINE_SOCARCH_SUFFIX:mx8mm = "-mx8mm"
+MACHINE_SOCARCH_SUFFIX:mx8mn = "-mx8mn"
+MACHINE_SOCARCH_SUFFIX:mx8mp = "-mx8mp"
+MACHINE_SOCARCH_SUFFIX:mx8mq = "-mx8m"
+MACHINE_SOCARCH_SUFFIX:mx8qxp = "-mx8"
+MACHINE_SOCARCH_SUFFIX:mx8dxl = "-mx8dxl"
+MACHINE_SOCARCH_SUFFIX:use-mainline-bsp = "-imx"
MACHINE_ARCH_FILTER = "virtual/kernel"
-MACHINE_SOCARCH_FILTER_append_imx = " \
+MACHINE_SOCARCH_FILTER:append:imx = " \
alsa-lib \
gstreamer1.0 \
weston \
"
-MACHINE_SOCARCH_FILTER_append_imxvpu = " \
+MACHINE_SOCARCH_FILTER:append:imxvpu = " \
imx-codec \
imx-vpuwrap \
libimxvpuapi \
virtual/imxvpu \
"
-MACHINE_SOCARCH_FILTER_append_imxgpu = " \
+MACHINE_SOCARCH_FILTER:append:imxgpu = " \
virtual/egl \
virtual/mesa \
virtual/libopenvg \
@@ -225,15 +225,15 @@ MACHINE_SOCARCH_FILTER_append_imxgpu = " \
opencv \
pango \
"
-MACHINE_SOCARCH_FILTER_append_imxgpu2d = " \
+MACHINE_SOCARCH_FILTER:append:imxgpu2d = " \
virtual/libg2d \
"
-MACHINE_SOCARCH_FILTER_append_imxgpu3d = " \
+MACHINE_SOCARCH_FILTER:append:imxgpu3d = " \
virtual/libgl \
virtual/libgles1 \
virtual/libgles2 \
"
-MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
+MACHINE_SOCARCH_FILTER:append:use-mainline-bsp = " \
virtual/egl \
virtual/libopenvg \
virtual/libg2d \
@@ -245,23 +245,23 @@ MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
pango \
qtbase \
"
-MACHINE_SOCARCH_FILTER_append_mx6q = " \
+MACHINE_SOCARCH_FILTER:append:mx6q = " \
opencl-icd-loader \
opencl-clhpp \
opencl-headers \
"
-MACHINE_SOCARCH_FILTER_append_mx8 = " \
+MACHINE_SOCARCH_FILTER:append:mx8 = " \
opencl-icd-loader \
opencl-clhpp \
opencl-headers \
"
-MACHINE_SOCARCH_FILTER_append_mx8qm = " \
+MACHINE_SOCARCH_FILTER:append:mx8qm = " \
virtual/libopenvx \
"
INHERIT += "fsl-dynamic-packagearch"
-SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
+SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS:append = " \
imx-gpu-viv->kernel-module-imx-gpu-viv \
libimxvpuapi->virtual/imxvpu \
imx-vpuwrap->virtual/imxvpu \
@@ -271,44 +271,44 @@ SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
# Firmware
MACHINE_FIRMWARE ?= ""
-MACHINE_FIRMWARE_append_mx25 = " firmware-imx-sdma-imx25"
-MACHINE_FIRMWARE_append_mx27 = " firmware-imx-vpu-imx27"
-MACHINE_FIRMWARE_append_mx7d = " linux-firmware-imx-sdma-imx7d firmware-imx-epdc"
-MACHINE_FIRMWARE_append_mx6 = " linux-firmware-imx-sdma-imx6q"
-MACHINE_FIRMWARE_append_mx6q = " firmware-imx-vpu-imx6q"
-MACHINE_FIRMWARE_append_mx6dl = " firmware-imx-vpu-imx6d firmware-imx-epdc"
-MACHINE_FIRMWARE_append_mx6sl = " firmware-imx-epdc"
-MACHINE_FIRMWARE_append_mx6sll = " firmware-imx-epdc"
-MACHINE_FIRMWARE_append_mx6ull = " firmware-imx-epdc"
-MACHINE_FIRMWARE_append_mx53 = " firmware-imx-vpu-imx53 firmware-imx-sdma-imx53"
-MACHINE_FIRMWARE_append_mx51 = " firmware-imx-vpu-imx51 firmware-imx-sdma-imx51"
-MACHINE_FIRMWARE_append_mx8mm = " linux-firmware-imx-sdma-imx7d"
-MACHINE_FIRMWARE_append_mx8mn = " linux-firmware-imx-sdma-imx7d"
-MACHINE_FIRMWARE_append_mx8mp = " linux-firmware-imx-sdma-imx7d firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
-MACHINE_FIRMWARE_append_mx8mq = " linux-firmware-imx-sdma-imx7d"
-MACHINE_FIRMWARE_append_mx8qm = " firmware-imx-vpu-imx8"
-MACHINE_FIRMWARE_append_mx8qxp = " firmware-imx-vpu-imx8"
-MACHINE_FIRMWARE_append_use-mainline-bsp = " linux-firmware-imx-sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q firmware-imx-vpu-imx6d"
+MACHINE_FIRMWARE:append:mx25 = " firmware-imx-sdma-imx25"
+MACHINE_FIRMWARE:append:mx27 = " firmware-imx-vpu-imx27"
+MACHINE_FIRMWARE:append:mx7d = " linux-firmware-imx-sdma-imx7d firmware-imx-epdc"
+MACHINE_FIRMWARE:append:mx6 = " linux-firmware-imx-sdma-imx6q"
+MACHINE_FIRMWARE:append:mx6q = " firmware-imx-vpu-imx6q"
+MACHINE_FIRMWARE:append:mx6dl = " firmware-imx-vpu-imx6d firmware-imx-epdc"
+MACHINE_FIRMWARE:append:mx6sl = " firmware-imx-epdc"
+MACHINE_FIRMWARE:append:mx6sll = " firmware-imx-epdc"
+MACHINE_FIRMWARE:append:mx6ull = " firmware-imx-epdc"
+MACHINE_FIRMWARE:append:mx53 = " firmware-imx-vpu-imx53 firmware-imx-sdma-imx53"
+MACHINE_FIRMWARE:append:mx51 = " firmware-imx-vpu-imx51 firmware-imx-sdma-imx51"
+MACHINE_FIRMWARE:append:mx8mm = " linux-firmware-imx-sdma-imx7d"
+MACHINE_FIRMWARE:append:mx8mn = " linux-firmware-imx-sdma-imx7d"
+MACHINE_FIRMWARE:append:mx8mp = " linux-firmware-imx-sdma-imx7d firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
+MACHINE_FIRMWARE:append:mx8mq = " linux-firmware-imx-sdma-imx7d"
+MACHINE_FIRMWARE:append:mx8qm = " firmware-imx-vpu-imx8"
+MACHINE_FIRMWARE:append:mx8qxp = " firmware-imx-vpu-imx8"
+MACHINE_FIRMWARE:append:use-mainline-bsp = " linux-firmware-imx-sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q firmware-imx-vpu-imx6d"
MACHINE_EXTRA_RRECOMMENDS += "${MACHINE_FIRMWARE}"
# Extra audio support
IMX_ALSA_EXTRA = ""
-IMX_ALSA_EXTRA_use-nxp-bsp = "imx-alsa-plugins"
-MACHINE_EXTRA_RRECOMMENDS_append_mx6 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
-MACHINE_EXTRA_RRECOMMENDS_append_mx7 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
-MACHINE_EXTRA_RRECOMMENDS_append_mx8 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
+IMX_ALSA_EXTRA:use-nxp-bsp = "imx-alsa-plugins"
+MACHINE_EXTRA_RRECOMMENDS:append:mx6 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
+MACHINE_EXTRA_RRECOMMENDS:append:mx7 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
+MACHINE_EXTRA_RRECOMMENDS:append:mx8 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
# Extra Cypress Wi-Fi and BTW firmware (Murata)
-MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
-MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
-MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
-MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
-MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
+MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
+MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
+MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
+MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
+MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
# Extra QCA Wi-Fi & BTE driver and firmware
-MACHINE_EXTRA_RRECOMMENDS_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-fsl-qca6174', '', d)}"
-MACHINE_EXTRA_RRECOMMENDS_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-fsl-qca9377', '', d)}"
+MACHINE_EXTRA_RRECOMMENDS:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-fsl-qca6174', '', d)}"
+MACHINE_EXTRA_RRECOMMENDS:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-fsl-qca9377', '', d)}"
# Extra udev rules
MACHINE_EXTRA_RRECOMMENDS += "udev-rules-imx"
@@ -320,29 +320,29 @@ MACHINE_EXTRA_RRECOMMENDS += " \
# GStreamer 1.0 plugins
MACHINE_GSTREAMER_1_0_PLUGIN ?= ""
-MACHINE_GSTREAMER_1_0_PLUGIN_mx6dl ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx6q ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx6sl ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx6sx ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx6ul ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx6ull ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx7d ?= "gstreamer1.0-plugins-imx-meta"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx8mm ?= "imx-gst1.0-plugin"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx8mn ?= "imx-gst1.0-plugin"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx8mp ?= "imx-gst1.0-plugin"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx8mq ?= "imx-gst1.0-plugin"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx8qm ?= "imx-gst1.0-plugin"
-MACHINE_GSTREAMER_1_0_PLUGIN_mx8qxp ?= "imx-gst1.0-plugin"
-
-PREFERRED_VERSION_gstreamer1.0_mx8 ?= "1.16.2.imx"
-PREFERRED_VERSION_gstreamer1.0-plugins-base_mx8 ?= "1.16.2.imx"
-PREFERRED_VERSION_gstreamer1.0-plugins-good_mx8 ?= "1.16.3.imx"
-PREFERRED_VERSION_gstreamer1.0-plugins-bad_mx8 ?= "1.16.3.imx"
-PREFERRED_VERSION_gstreamer1.0-libav_mx8 ?= "1.16.0"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx6dl ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx6q ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx6sl ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx6sx ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx6ul ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx6ull ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx7d ?= "gstreamer1.0-plugins-imx-meta"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx8mm ?= "imx-gst1.0-plugin"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx8mn ?= "imx-gst1.0-plugin"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx8mp ?= "imx-gst1.0-plugin"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx8mq ?= "imx-gst1.0-plugin"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx8qm ?= "imx-gst1.0-plugin"
+MACHINE_GSTREAMER_1_0_PLUGIN:mx8qxp ?= "imx-gst1.0-plugin"
+
+PREFERRED_VERSION_gstreamer1.0:mx8 ?= "1.16.2.imx"
+PREFERRED_VERSION_gstreamer1.0-plugins-base:mx8 ?= "1.16.2.imx"
+PREFERRED_VERSION_gstreamer1.0-plugins-good:mx8 ?= "1.16.3.imx"
+PREFERRED_VERSION_gstreamer1.0-plugins-bad:mx8 ?= "1.16.3.imx"
+PREFERRED_VERSION_gstreamer1.0-libav:mx8 ?= "1.16.0"
# Determines if the SoC has support for Vivante kernel driver
SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT = "0"
-SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_imxgpu = "1"
+SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT:imxgpu = "1"
# Handle Vivante kernel driver setting:
# 0 - machine does not have Vivante GPU driver support
@@ -355,59 +355,59 @@ PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
PREFERRED_PROVIDER_virtual/libgles1 ?= "mesa"
PREFERRED_PROVIDER_virtual/libgles2 ?= "mesa"
-PREFERRED_PROVIDER_virtual/egl_imxgpu ?= "imx-gpu-viv"
-PREFERRED_PROVIDER_virtual/libgl_imxgpu3d ?= "imx-gpu-viv"
-PREFERRED_PROVIDER_virtual/libgles1_imxgpu3d ?= "imx-gpu-viv"
-PREFERRED_PROVIDER_virtual/libgles2_imxgpu3d ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_virtual/egl:imxgpu ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_virtual/libgl:imxgpu3d ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_virtual/libgles1:imxgpu3d ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_virtual/libgles2:imxgpu3d ?= "imx-gpu-viv"
PREFERRED_PROVIDER_virtual/libg2d ?= "imx-gpu-g2d"
-PREFERRED_PROVIDER_virtual/libg2d_imxdpu ?= "imx-dpu-g2d"
-PREFERRED_PROVIDER_opencl-clhpp_imxgpu ?= "imx-gpu-viv"
-PREFERRED_PROVIDER_opencl-headers_imxgpu ?= "imx-gpu-viv"
-PREFERRED_PROVIDER_opencl-icd-loader_imxgpu ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_virtual/libg2d:imxdpu ?= "imx-dpu-g2d"
+PREFERRED_PROVIDER_opencl-clhpp:imxgpu ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_opencl-headers:imxgpu ?= "imx-gpu-viv"
+PREFERRED_PROVIDER_opencl-icd-loader:imxgpu ?= "imx-gpu-viv"
-PREFERRED_VERSION_weston_imx ?= "9.0.0.imx"
-PREFERRED_VERSION_weston_use-mainline-bsp = ""
+PREFERRED_VERSION_weston:imx ?= "9.0.0.imx"
+PREFERRED_VERSION_weston:use-mainline-bsp = ""
-PREFERRED_VERSION_wayland-protocols_mx6 ?= "1.20.imx"
-PREFERRED_VERSION_wayland-protocols_mx7 ?= "1.20.imx"
-PREFERRED_VERSION_wayland-protocols_mx8 ?= "1.20.imx"
+PREFERRED_VERSION_wayland-protocols:mx6 ?= "1.20.imx"
+PREFERRED_VERSION_wayland-protocols:mx7 ?= "1.20.imx"
+PREFERRED_VERSION_wayland-protocols:mx8 ?= "1.20.imx"
# Use i.MX libdrm Version
-PREFERRED_VERSION_libdrm_mx6 ?= "2.4.102.imx"
-PREFERRED_VERSION_libdrm_mx7 ?= "2.4.102.imx"
-PREFERRED_VERSION_libdrm_mx8 ?= "2.4.102.imx"
+PREFERRED_VERSION_libdrm:mx6 ?= "2.4.102.imx"
+PREFERRED_VERSION_libdrm:mx7 ?= "2.4.102.imx"
+PREFERRED_VERSION_libdrm:mx8 ?= "2.4.102.imx"
# Use i.MX optee Version
-PREFERRED_VERSION_optee-os_mx8 ?= "3.10.0.imx"
-PREFERRED_VERSION_optee-client_mx8 ?= "3.10.0.imx"
-PREFERRED_VERSION_optee-test_mx8 ?= "3.10.0.imx"
+PREFERRED_VERSION_optee-os:mx8 ?= "3.10.0.imx"
+PREFERRED_VERSION_optee-client:mx8 ?= "3.10.0.imx"
+PREFERRED_VERSION_optee-test:mx8 ?= "3.10.0.imx"
#Use i.MX opencv Version for mx8
-PREFERRED_VERSION_opencv_mx8 ?= "4.5.2.imx"
+PREFERRED_VERSION_opencv:mx8 ?= "4.5.2.imx"
# Handle default kernel
IMX_DEFAULT_KERNEL = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mxs = "linux-fslc"
-IMX_DEFAULT_KERNEL_mx5 = "linux-fslc"
-IMX_DEFAULT_KERNEL_mx6 = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mx7 = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mx8 = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mx7ulp = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mx6sll = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mx6ul = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_mx6ull = "linux-fslc-imx"
-IMX_DEFAULT_KERNEL_use-mainline-bsp = "linux-fslc"
+IMX_DEFAULT_KERNEL:mxs = "linux-fslc"
+IMX_DEFAULT_KERNEL:mx5 = "linux-fslc"
+IMX_DEFAULT_KERNEL:mx6 = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:mx7 = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:mx8 = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:mx7ulp = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:mx6sll = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:mx6ul = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:mx6ull = "linux-fslc-imx"
+IMX_DEFAULT_KERNEL:use-mainline-bsp = "linux-fslc"
PREFERRED_PROVIDER_virtual/kernel ??= "${IMX_DEFAULT_KERNEL}"
SOC_DEFAULT_IMAGE_FSTYPES = "wic.bmap wic.gz"
-SOC_DEFAULT_IMAGE_FSTYPES_mxs = "uboot-mxsboot-sdcard wic.bmap wic.gz"
+SOC_DEFAULT_IMAGE_FSTYPES:mxs = "uboot-mxsboot-sdcard wic.bmap wic.gz"
# Do not update fstab file when using wic images
WIC_CREATE_EXTRA_ARGS ?= "--no-fstab-update"
OPTEE_BOOT_IMAGE = "uTee"
-OPTEE_BOOT_IMAGE_aarch64 = ""
+OPTEE_BOOT_IMAGE:aarch64 = ""
IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
@@ -419,7 +419,7 @@ IMAGE_BOOT_FILES ?= " \
### wic default support
OPTEE_WKS_FILE_DEPENDS = "optee-os"
-OPTEE_WKS_FILE_DEPENDS_aarch64 = ""
+OPTEE_WKS_FILE_DEPENDS:aarch64 = ""
WKS_FILE_DEPENDS ?= " \
virtual/bootloader \
@@ -429,8 +429,8 @@ WKS_FILE_DEPENDS ?= " \
${@bb.utils.contains('MACHINE_FEATURES', 'optee', '${OPTEE_WKS_FILE_DEPENDS}', '', d)} \
"
-WKS_FILE_DEPENDS_append_mx8 = " imx-boot"
-WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
+WKS_FILE_DEPENDS:append:mx8 = " imx-boot"
+WKS_FILE_DEPENDS:append:mx8m = " imx-boot"
# We need to restrict the append so we don't add this for other i.MX SoC's.
# Derivatives that are not yet adopted the usage of boot container provided
@@ -444,15 +444,15 @@ WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
# deployment task extesion execution defined in imx-boot-container class.
# For NXP BSP: rename is done in 'imx-boot' recipe at the execution of compile
# task.
-WKS_FILE_DEPENDS_append_use-mainline-bsp_aarch64 = " \
+WKS_FILE_DEPENDS:append:use-mainline-bsp:aarch64 = " \
${@oe.utils.ifelse(d.getVar('UBOOT_PROVIDES_BOOT_CONTAINER') == '0', 'imx-boot', '')} \
"
SOC_DEFAULT_WKS_FILE ?= "imx-uboot-bootpart.wks.in"
-SOC_DEFAULT_WKS_FILE_mx8m ?= "imx-imx-boot-bootpart.wks.in"
+SOC_DEFAULT_WKS_FILE:mx8m ?= "imx-imx-boot-bootpart.wks.in"
-SOC_DEFAULT_WKS_FILE_mx8 ?= "imx-imx-boot-bootpart.wks.in"
-SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-bootpart.wks.in"
+SOC_DEFAULT_WKS_FILE:mx8 ?= "imx-imx-boot-bootpart.wks.in"
+SOC_DEFAULT_WKS_FILE:mxs ?= "imx-uboot-mxs-bootpart.wks.in"
# Boot container built as a part of mainline U-Boot uses different WKS
# file as the entire mx8m series, as U-Boot versions later than 2021.04 are
@@ -462,19 +462,19 @@ SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-bootpart.wks.in"
# replacement of imx-boot from NXP.
# Creation of those binary files is controlled by UBOOT_PROVIDES_BOOT_CONTAINER
# variable defined above.
-SOC_DEFAULT_WKS_FILE_imx-boot-container ?= "imx-boot-container-bootpart.wks.in"
+SOC_DEFAULT_WKS_FILE:imx-boot-container ?= "imx-boot-container-bootpart.wks.in"
WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
SERIAL_CONSOLES = "115200;ttymxc0"
-SERIAL_CONSOLES_mxs = "115200;ttyAMA0"
+SERIAL_CONSOLES:mxs = "115200;ttyAMA0"
KERNEL_IMAGETYPE = "zImage"
-KERNEL_IMAGETYPE_aarch64 = "Image"
+KERNEL_IMAGETYPE:aarch64 = "Image"
MACHINE_FEATURES = "usbgadget usbhost vfat alsa touchscreen"
-# Add the ability to specify _imx machines
+# Add the ability to specify :imx machines
MACHINEOVERRIDES =. "imx:"
-HOSTTOOLS_NONFATAL_append_mx8 = " sha384sum"
+HOSTTOOLS_NONFATAL:append:mx8 = " sha384sum"
diff --git a/conf/machine/include/imx8dxl-evk.inc b/conf/machine/include/imx8dxl-evk.inc
index 2868b4d6c1c3..4e75f8c4bbd3 100644
--- a/conf/machine/include/imx8dxl-evk.inc
+++ b/conf/machine/include/imx8dxl-evk.inc
@@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
IMX_DEFAULT_BSP = "nxp"
MACHINE_FEATURES += "pci bcm43455 bcm4356"
-MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
+MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
# Don't include kernels in standard images
RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
@@ -23,7 +23,7 @@ USE_VT = "0"
KERNEL_DEVICETREE = " \
freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \
"
diff --git a/conf/machine/include/imx8mm-evk.inc b/conf/machine/include/imx8mm-evk.inc
index f458c56de9b7..1295de1d8271 100644
--- a/conf/machine/include/imx8mm-evk.inc
+++ b/conf/machine/include/imx8mm-evk.inc
@@ -11,19 +11,19 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43455 bcm4356"
# and pin it to NXP BSP only
# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
# a full support for it yet.
-MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359 qca9377"
+MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359 qca9377"
KERNEL_DEVICETREE = " \
freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-pcie-ep.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
"
UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
-IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
UBOOT_SUFFIX = "bin"
@@ -51,18 +51,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
# to be used to define the boot process.
# We opt-in for Syslinux, since it is designated as a preferred
# distro boot mode according to the U-Boot documentation.
-UBOOT_EXTLINUX_use-mainline-bsp = "1"
-UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
-UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Mini EVK"
+UBOOT_EXTLINUX:use-mainline-bsp = "1"
+UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
+UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Mini EVK"
-UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M Mini EVK"
-UBOOT_EXTLINUX_FDT_default_use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
-UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp = "console=${console}"
-UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp = "root=/dev/mmcblk1p2"
+UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M Mini EVK"
+UBOOT_EXTLINUX_FDT_default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
+UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp = "console=${console}"
+UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp = "root=/dev/mmcblk1p2"
# Add extlinux.conf to the lis of files, which are deployed onto the
# boot partition
-IMAGE_BOOT_FILES_append_use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
+IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
LOADADDR = ""
UBOOT_SUFFIX = "bin"
@@ -73,4 +73,4 @@ OPTEE_BIN_EXT = "8mm"
TEE_LOAD_ADDR = "0xbe000000"
# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
diff --git a/conf/machine/include/imx8mn-evk.inc b/conf/machine/include/imx8mn-evk.inc
index a0e39857c770..411004000b66 100644
--- a/conf/machine/include/imx8mn-evk.inc
+++ b/conf/machine/include/imx8mn-evk.inc
@@ -8,12 +8,12 @@ MACHINE_FEATURES += "wifi bluetooth bcm43455 bcm4356"
# NXP BSP can consume proprietary jailhouse and Broadcom drivers
# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
# a full support for it yet.
-MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359"
+MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359"
KERNEL_DEVICETREE = " \
freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-ak5558.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
@@ -22,8 +22,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
"
UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
-IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
UBOOT_SUFFIX = "bin"
@@ -52,18 +52,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
# to be used to define the boot process.
# We opt-in for Syslinux, since it is designated as a preferred
# distro boot mode according to the U-Boot documentation.
-UBOOT_EXTLINUX_use-mainline-bsp = "1"
-UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
-UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Nano EVK"
+UBOOT_EXTLINUX:use-mainline-bsp = "1"
+UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
+UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Nano EVK"
-UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M Nano EVK"
-UBOOT_EXTLINUX_FDT_default_use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
-UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp = "console=${console}"
-UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp = "root=/dev/mmcblk1p2"
+UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M Nano EVK"
+UBOOT_EXTLINUX_FDT_default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
+UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp = "console=${console}"
+UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp = "root=/dev/mmcblk1p2"
# Add extlinux.conf to the lis of files, which are deployed onto the
# boot partition
-IMAGE_BOOT_FILES_append_use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
+IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
BOOT_SPACE = "65536"
LOADADDR = ""
@@ -79,4 +79,4 @@ OPTEE_BIN_EXT = "8mn"
TEE_LOAD_ADDR = "0x56000000"
# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
diff --git a/conf/machine/include/imx8mp-evk.inc b/conf/machine/include/imx8mp-evk.inc
index d070831ff3d3..bc2c038f0076 100644
--- a/conf/machine/include/imx8mp-evk.inc
+++ b/conf/machine/include/imx8mp-evk.inc
@@ -8,7 +8,7 @@ MACHINE_FEATURES += "pci wifi bluetooth"
# NXP BSP can consume proprietary jailhouse and Marvell drivers
# OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
# a full support for it yet.
-MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse mrvl8997"
+MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse mrvl8997"
# Mainline kernel contains only one DTB file for
# imx8mpevk machine
@@ -18,8 +18,8 @@ KERNEL_DEVICETREE = " \
UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
-IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
-IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
+IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
+IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
UBOOT_SUFFIX = "bin"
@@ -50,18 +50,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
# to be used to define the boot process.
# We opt-in for Syslinux, since it is designated as a preferred
# distro boot mode according to the U-Boot documentation.
-UBOOT_EXTLINUX_use-mainline-bsp = "1"
-UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
-UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Plus EVK"
+UBOOT_EXTLINUX:use-mainline-bsp = "1"
+UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
+UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Plus EVK"
-UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M Plus EVK"
-UBOOT_EXTLINUX_FDT_default_use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
-UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp = "console=${console}"
-UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp = "root=/dev/mmcblk1p2"
+UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M Plus EVK"
+UBOOT_EXTLINUX_FDT_default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
+UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp = "console=${console}"
+UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp = "root=/dev/mmcblk1p2"
# Add extlinux.conf to the lis of files, which are deployed onto the
# boot partition
-IMAGE_BOOT_FILES_append_use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
+IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
LOADADDR = ""
UBOOT_SUFFIX = "bin"
@@ -72,4 +72,4 @@ OPTEE_BIN_EXT = "8mp"
TEE_LOAD_ADDR = "0x56000000"
# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
diff --git a/conf/machine/include/imx8x-mek.inc b/conf/machine/include/imx8x-mek.inc
index 55a28c877e60..0682fbc1be21 100644
--- a/conf/machine/include/imx8x-mek.inc
+++ b/conf/machine/include/imx8x-mek.inc
@@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
IMX_DEFAULT_BSP = "nxp"
MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
-MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
+MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
# Don't include kernels in standard images
RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
@@ -23,7 +23,7 @@ USE_VT = "0"
KERNEL_DEVICETREE = " \
freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
"
-KERNEL_DEVICETREE_append_use-nxp-bsp = " \
+KERNEL_DEVICETREE:append:use-nxp-bsp = " \
freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191-rpmsg.dtb \
freescale/${KERNEL_DEVICETREE_BASENAME}-dsp.dtb \
@@ -71,4 +71,4 @@ IMXBOOT_TARGETS = \
BOARD_TYPE = "mek"
# Add additional firmware
-MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
+MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
diff --git a/conf/machine/include/qoriq-base.inc b/conf/machine/include/qoriq-base.inc
index 0a42160f0f30..9bc3ee76c756 100644
--- a/conf/machine/include/qoriq-base.inc
+++ b/conf/machine/include/qoriq-base.inc
@@ -9,8 +9,8 @@ PREFERRED_PROVIDER_nativesdk-u-boot-mkimage ??= "nativesdk-u-boot-tools"
PREFERRED_VERSION_testfloat = "2a"
SOC_DEFAULT_IMAGE_FSTYPES = "tar.gz"
-SOC_DEFAULT_IMAGE_FSTYPES_append_ls1043a = " wic.bz2"
-SOC_DEFAULT_IMAGE_FSTYPES_append_ls1046a = " wic.bz2"
+SOC_DEFAULT_IMAGE_FSTYPES:append:ls1043a = " wic.bz2"
+SOC_DEFAULT_IMAGE_FSTYPES:append:ls1046a = " wic.bz2"
IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
# Composite Image Layout (in KBytes)
@@ -31,8 +31,8 @@ IMAGE_BOOT_FILES ?= " \
"
SOC_DEFAULT_WKS_FILE ?= ""
-SOC_DEFAULT_WKS_FILE_ls1043a ?= "ls104x-uboot-bootpart.wks.in"
-SOC_DEFAULT_WKS_FILE_ls1046a ?= "ls104x-uboot-bootpart.wks.in"
+SOC_DEFAULT_WKS_FILE:ls1043a ?= "ls104x-uboot-bootpart.wks.in"
+SOC_DEFAULT_WKS_FILE:ls1046a ?= "ls104x-uboot-bootpart.wks.in"
WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
diff --git a/conf/machine/include/utilities.inc b/conf/machine/include/utilities.inc
index f11b588bbe5d..34ce7abcb6d7 100644
--- a/conf/machine/include/utilities.inc
+++ b/conf/machine/include/utilities.inc
@@ -23,6 +23,6 @@ def make_dtb_boot_files(d):
def get_spl_binary(d):
imx_default_bootloader = d.get('IMX_DEFAULT_BOOTLOADER')
- spl_binary = d.getVar("SPL_BINARY_pn-%s" % imx_default_bootloader)
+ spl_binary = d.getVar("SPL_BINARY:pn-%s" % imx_default_bootloader)
return spl_binary or ""
diff --git a/conf/machine/ls1028ardb.conf b/conf/machine/ls1028ardb.conf
index 63f3802f7959..d70a5a619f9b 100644
--- a/conf/machine/ls1028ardb.conf
+++ b/conf/machine/ls1028ardb.conf
@@ -22,7 +22,7 @@ UBOOT_CONFIG[tfa-secure-boot] = "ls1028ardb_tfa_SECURE_BOOT_defconfig"
UBOOT_CONFIG[tfa] = "ls1028ardb_tfa_defconfig"
KERNEL_DEVICETREE ?= "freescale/fsl-ls1028a-rdb.dtb freescale/fsl-ls1028a-qds.dtb"
-KERNEL_DEVICETREE_append_use-nxp-bsp = "\
+KERNEL_DEVICETREE:append:use-nxp-bsp = "\
freescale/fsl-ls1028a-rdb-dpdk.dtb \
"
KERNEL_DEFCONFIG ?= "defconfig"
diff --git a/conf/machine/ls1043ardb.conf b/conf/machine/ls1043ardb.conf
index fa8ab61566c7..4ff3c0acb913 100644
--- a/conf/machine/ls1043ardb.conf
+++ b/conf/machine/ls1043ardb.conf
@@ -27,7 +27,7 @@ KERNEL_DEVICETREE ?= "\
freescale/fsl-ls1043a-qds.dtb \
"
# usdpaa dtb is used for dpdk. TODO: rename in kernel
-KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
+KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
freescale/fsl-ls1043a-rdb-sdk.dtb \
freescale/fsl-ls1043a-rdb-usdpaa.dtb \
freescale/fsl-ls1043a-qds-sdk.dtb \
diff --git a/conf/machine/ls1046afrwy.conf b/conf/machine/ls1046afrwy.conf
index e6eabc0f36df..eb3c0bb6f4a5 100644
--- a/conf/machine/ls1046afrwy.conf
+++ b/conf/machine/ls1046afrwy.conf
@@ -25,7 +25,7 @@ KERNEL_DEVICETREE ?= "\
freescale/fsl-ls1046a-frwy.dtb \
"
# usdpaa dtb is used for dpdk. TODO: rename in kernel
-KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
+KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
freescale/fsl-ls1046a-frwy-sdk.dtb \
freescale/fsl-ls1046a-frwy-usdpaa.dtb \
"
diff --git a/conf/machine/ls1046ardb.conf b/conf/machine/ls1046ardb.conf
index 97fb1e29e36a..8e815295ad4c 100644
--- a/conf/machine/ls1046ardb.conf
+++ b/conf/machine/ls1046ardb.conf
@@ -26,7 +26,7 @@ KERNEL_DEVICETREE ?= "\
freescale/fsl-ls1046a-qds.dtb \
"
# usdpaa dtb is used for dpdk. TODO: rename in kernel
-KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
+KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
freescale/fsl-ls1046a-rdb-sdk.dtb \
freescale/fsl-ls1046a-rdb-usdpaa.dtb \
freescale/fsl-ls1046a-qds-sdk.dtb \
diff --git a/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend b/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend
index 10b66c0e4adc..b7bf3298f6ff 100644
--- a/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend
+++ b/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend
@@ -1,3 +1,3 @@
-do_install_append() {
+do_install:append() {
rm -f ${D}${sysconfdir}/xdg/weston/weston.ini
}
diff --git a/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc b/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc
index cdd0f08fde77..7d8065f9db46 100644
--- a/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc
+++ b/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc
@@ -1,4 +1,4 @@
-DEPENDS_append_imxvpu = " imx-vpuwrap"
+DEPENDS:append:imxvpu = " imx-vpuwrap"
# Additional imx code and patches are included in the chromium-imx git repository.
# The code below fetches this repository, copies the extra source over to the main
@@ -26,7 +26,7 @@ do_patch[prefuncs] =+ "add_chromium_imx_patches"
# * Lost context problems are not known to happen with Vivante GPUs,
# so it is safe to use ignore-lost-context
# * Proprietary codecs need to be enabled for h.264 and MP4 support
-PACKAGECONFIG_append = " ignore-lost-context proprietary-codecs"
+PACKAGECONFIG:append = " ignore-lost-context proprietary-codecs"
copy_chromium_imx_files() {
# sources in src/ are already organized in a manner
diff --git a/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend b/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
index 0b4c4861b6e3..fb90c73e1d1f 100644
--- a/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
+++ b/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
@@ -1,4 +1,4 @@
-PACKAGECONFIG_imxgpu3d ??= " \
+PACKAGECONFIG:imxgpu3d ??= " \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland egl', \
bb.utils.contains('DISTRO_FEATURES', 'x11', 'glx x11', \
'', d), d)} \
diff --git a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend b/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend
index afbaee4323ad..e07d0d54235a 100644
--- a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend
+++ b/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend
@@ -1,4 +1,4 @@
-PACKAGECONFIG_imxgpu3d ??= " \
+PACKAGECONFIG:imxgpu3d ??= " \
cogl-pango gles2 \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'egl-wayland', \
bb.utils.contains('DISTRO_FEATURES', 'x11', 'egl-x11', \
diff --git a/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend b/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend
index 72d991c7e590..4fc41d058011 100644
--- a/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend
+++ b/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend
@@ -1 +1 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
diff --git a/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend b/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend
index 2e648ba34914..06661133569f 100644
--- a/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend
+++ b/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend
@@ -1,4 +1,4 @@
-# Only _mx8 machine do provide virtual/libgbm required for any drm* flavour
-DRM-REMOVE_imxgpu = "drm-gl drm-gles2"
-DRM-REMOVE_imxgpu_mx8 = ""
-PACKAGECONFIG_remove = "${DRM-REMOVE}"
+# Only :mx8 machine do provide virtual/libgbm required for any drm* flavour
+DRM-REMOVE:imxgpu = "drm-gl drm-gles2"
+DRM-REMOVE:imxgpu:mx8 = ""
+PACKAGECONFIG:remove = "${DRM-REMOVE}"
diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend b/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend
index 8c6138c54aae..d07f8ae14d2c 100644
--- a/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend
+++ b/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend
@@ -1,4 +1,4 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
-SRC_URI_append_qoriq-ppc = " file://ppc-fixplt.patch "
+SRC_URI:append:qoriq-ppc = " file://ppc-fixplt.patch "
diff --git a/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb b/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
index 1793ec06fb4e..9c6be782d6d0 100644
--- a/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
+++ b/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
@@ -19,15 +19,15 @@ EXTRA_OEMAKE_virtclass-native = 'FMCHOSTMODE=1 FMD_USPACE_HEADER_PATH="${STAGING
TCLAP_HEADER_PATH="${STAGING_INCDIR}" '
EXTRA_OEMAKE_PLATFORM ?= ""
-EXTRA_OEMAKE_PLATFORM_ls1043a = "ls1043"
-EXTRA_OEMAKE_PLATFORM_ls1046a = "ls1046"
-EXTRA_OEMAKE_PLATFORM_ls1088a = "ls1088"
-EXTRA_OEMAKE_PLATFORM_p1020 = "p4080ds"
-EXTRA_OEMAKE_PLATFORM_p2020 = "p4080ds"
-EXTRA_OEMAKE_PLATFORM_p2041 = "p4080ds"
-EXTRA_OEMAKE_PLATFORM_p3041 = "p4080ds"
-EXTRA_OEMAKE_PLATFORM_p4080 = "p4080ds"
-EXTRA_OEMAKE_PLATFORM_p5040 = "p4080ds"
+EXTRA_OEMAKE_PLATFORM:ls1043a = "ls1043"
+EXTRA_OEMAKE_PLATFORM:ls1046a = "ls1046"
+EXTRA_OEMAKE_PLATFORM:ls1088a = "ls1088"
+EXTRA_OEMAKE_PLATFORM:p1020 = "p4080ds"
+EXTRA_OEMAKE_PLATFORM:p2020 = "p4080ds"
+EXTRA_OEMAKE_PLATFORM:p2041 = "p4080ds"
+EXTRA_OEMAKE_PLATFORM:p3041 = "p4080ds"
+EXTRA_OEMAKE_PLATFORM:p4080 = "p4080ds"
+EXTRA_OEMAKE_PLATFORM:p5040 = "p4080ds"
do_compile () {
diff --git a/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend b/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend
index f4f4350489cf..be6945744efa 100644
--- a/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend
+++ b/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend
@@ -1,8 +1,8 @@
# i.MX extra configuration
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
-SRC_URI_append_imxgpu3d = " \
+SRC_URI:append:imxgpu3d = " \
file://0016-xserver-common-enable-iglx-module.patch \
"
-PACKAGE_ARCH_imxgpu3d = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:imxgpu3d = "${MACHINE_SOCARCH}"
diff --git a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
index 187681a8b123..8950c151bd77 100644
--- a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
+++ b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
@@ -1,4 +1,4 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/qt4:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/qt4:"
python __anonymous () {
families = ['mx6']
@@ -8,21 +8,21 @@ python __anonymous () {
d.appendVarFlag('do_configure', 'depends', ' virtual/kernel:do_shared_workdir')
}
-SRC_URI_append_imxgpu2d += " \
+SRC_URI:append:imxgpu2d += " \
file://0001-Add-support-for-i.MX-codecs-to-phonon.patch \
file://0002-i.MX-video-renderer-Allow-v4l-device-from-environmen.patch \
file://0003-i.MX6-force-egl-visual-ID-33.patch \
"
-DEPENDS_append_imxgpu2d = " virtual/kernel virtual/libgles2"
-QT_GLFLAGS_imxgpu2d = "-opengl es2 -openvg"
-QT_CONFIG_FLAGS_append_imxgpu2d = " -I${STAGING_KERNEL_DIR}/include/uapi \
+DEPENDS:append:imxgpu2d = " virtual/kernel virtual/libgles2"
+QT_GLFLAGS:imxgpu2d = "-opengl es2 -openvg"
+QT_CONFIG_FLAGS:append:imxgpu2d = " -I${STAGING_KERNEL_DIR}/include/uapi \
-I${STAGING_KERNEL_DIR}/include/ \
-DLINUX=1 -DEGL_API_FB=1 \
-DQT_QPA_EXPERIMENTAL_TOUCHEVENT=1"
# The QT_CONFIG_FLAGS can pollute *.la files with -Dxxx
-do_compile_append_mx6 () {
+do_compile:append:mx6 () {
find lib -name "*.la" | xargs -n1 sed -i 's/-D.*=1//g'
}
diff --git a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
index bf3fb66eeb72..0d5897adc7f9 100644
--- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
+++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
@@ -3,35 +3,35 @@
# Copyright (C) 2016, 2017 O.S. Systems Software LTDA.
# Copyright (C) 2017-2018 NXP
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
-SRC_URI_append_imxgpu = " \
+SRC_URI:append:imxgpu = " \
file://0014-Add-IMX-GPU-support.patch \
file://0001-egl.prf-Fix-build-error-when-egl-headers-need-platfo.patch \
"
PACKAGECONFIG_GL_IMX_GPU = ""
-PACKAGECONFIG_GL_IMX_GPU_mx8 = "gbm kms"
+PACKAGECONFIG_GL_IMX_GPU:mx8 = "gbm kms"
-PACKAGECONFIG_GL_imxpxp = "gles2"
-PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', ' gl', '', d)} \
+PACKAGECONFIG_GL:imxpxp = "gles2"
+PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', ' gl', '', d)} \
${PACKAGECONFIG_GL_IMX_GPU}"
-PACKAGECONFIG_GL_imxgpu3d = "gles2 \
+PACKAGECONFIG_GL:imxgpu3d = "gles2 \
${PACKAGECONFIG_GL_IMX_GPU}"
-PACKAGECONFIG_GL_use-mainline-bsp ?= "gles2 gbm kms"
+PACKAGECONFIG_GL:use-mainline-bsp ?= "gles2 gbm kms"
PACKAGECONFIG_PLATFORM = ""
-PACKAGECONFIG_PLATFORM_imxgpu2d = "no-opengl linuxfb"
-PACKAGECONFIG_PLATFORM_imxgpu3d = " \
+PACKAGECONFIG_PLATFORM:imxgpu2d = "no-opengl linuxfb"
+PACKAGECONFIG_PLATFORM:imxgpu3d = " \
${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', \
bb.utils.contains('DISTRO_FEATURES', 'wayland', '', \
'eglfs', d), d)}"
-PACKAGECONFIG_PLATFORM_use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
+PACKAGECONFIG_PLATFORM:use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
PACKAGECONFIG += "${PACKAGECONFIG_PLATFORM}"
PACKAGECONFIG_VULKAN_IMX_GPU = ""
-PACKAGECONFIG_VULKAN_IMX_GPU_mx8 = "vulkan"
-PACKAGECONFIG_VULKAN_IMX_GPU_mx8mm = ""
+PACKAGECONFIG_VULKAN_IMX_GPU:mx8 = "vulkan"
+PACKAGECONFIG_VULKAN_IMX_GPU:mx8mm = ""
PACKAGECONFIG_VULKAN = ""
-PACKAGECONFIG_VULKAN_imxgpu = "${PACKAGECONFIG_VULKAN_IMX_GPU}"
+PACKAGECONFIG_VULKAN:imxgpu = "${PACKAGECONFIG_VULKAN_IMX_GPU}"
PACKAGECONFIG += "${@bb.utils.contains('DISTRO_FEATURES', 'vulkan', '${PACKAGECONFIG_VULKAN}', '', d)}"
diff --git a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
index 168db09548ab..c1594e0571b4 100644
--- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
+++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
@@ -1,8 +1,8 @@
# etnaviv mesa does not have glx
-PACKAGECONFIG_remove_use-mainline-bsp = "xcomposite-glx"
+PACKAGECONFIG:remove:use-mainline-bsp = "xcomposite-glx"
-PACKAGECONFIG_remove_mx6 = "xcomposite-egl xcomposite-glx"
-PACKAGECONFIG_remove_mx7 = "xcomposite-egl xcomposite-glx"
+PACKAGECONFIG:remove:mx6 = "xcomposite-egl xcomposite-glx"
+PACKAGECONFIG:remove:mx7 = "xcomposite-egl xcomposite-glx"
# i.MX8 does never provide native x11, so required dependencies are not met
-PACKAGECONFIG_remove_mx8 = "xcomposite-egl xcomposite-glx"
+PACKAGECONFIG:remove:mx8 = "xcomposite-egl xcomposite-glx"
diff --git a/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend b/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend
index c7e6d32e4213..7aecf1e466c6 100644
--- a/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend
+++ b/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend
@@ -1,9 +1,9 @@
PACKAGECONFIG_qoriq-ppc = "qemu yajl lxc test remote macvtap libvirtd netcf udev python"
-FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
-SRC_URI_append_qoriq-ppc = " file://qemu.conf"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
+SRC_URI:append:qoriq-ppc = " file://qemu.conf"
-do_install_append_qoriq-ppc() {
+do_install:append:qoriq-ppc() {
install -m 0644 ${WORKDIR}/qemu.conf ${D}${sysconfdir}/libvirt/qemu.conf
}
diff --git a/recipes-bsp/alsa-state/alsa-state.bbappend b/recipes-bsp/alsa-state/alsa-state.bbappend
index 3a398b2210fc..9433130725d5 100644
--- a/recipes-bsp/alsa-state/alsa-state.bbappend
+++ b/recipes-bsp/alsa-state/alsa-state.bbappend
@@ -1,10 +1,10 @@
# Append path for freescale layer to include alsa-state asound.conf
-FILESEXTRAPATHS_prepend_mx6 := "${THISDIR}/${PN}/imx:"
-FILESEXTRAPATHS_prepend_mx7 := "${THISDIR}/${PN}/imx:"
-FILESEXTRAPATHS_prepend_mx8 := "${THISDIR}/${PN}/imx:"
-FILESEXTRAPATHS_prepend_use-mainline-bsp := "${THISDIR}/${PN}/imx:"
+FILESEXTRAPATHS:prepend:mx6 := "${THISDIR}/${PN}/imx:"
+FILESEXTRAPATHS:prepend:mx7 := "${THISDIR}/${PN}/imx:"
+FILESEXTRAPATHS:prepend:mx8 := "${THISDIR}/${PN}/imx:"
+FILESEXTRAPATHS:prepend:use-mainline-bsp := "${THISDIR}/${PN}/imx:"
-PACKAGE_ARCH_mx6 = "${MACHINE_ARCH}"
-PACKAGE_ARCH_mx7 = "${MACHINE_ARCH}"
-PACKAGE_ARCH_mx8 = "${MACHINE_ARCH}"
-PACKAGE_ARCH_use-mainline-bsp = "${MACHINE_ARCH}"
+PACKAGE_ARCH:mx6 = "${MACHINE_ARCH}"
+PACKAGE_ARCH:mx7 = "${MACHINE_ARCH}"
+PACKAGE_ARCH:mx8 = "${MACHINE_ARCH}"
+PACKAGE_ARCH:use-mainline-bsp = "${MACHINE_ARCH}"
diff --git a/recipes-bsp/atf/qoriq-atf_1.5.bb b/recipes-bsp/atf/qoriq-atf_1.5.bb
index 192083348ea9..b03a6bcb95f5 100644
--- a/recipes-bsp/atf/qoriq-atf_1.5.bb
+++ b/recipes-bsp/atf/qoriq-atf_1.5.bb
@@ -8,7 +8,7 @@ PV = "1.5+git${SRCPV}"
inherit deploy
DEPENDS += "u-boot-mkimage-native u-boot openssl openssl-native mbedtls rcw cst-native"
-DEPENDS_append_lx2160a = " ddr-phy"
+DEPENDS:append:lx2160a = " ddr-phy"
do_compile[depends] += "u-boot:do_deploy rcw:do_deploy uefi:do_deploy"
S = "${WORKDIR}/git"
@@ -21,12 +21,12 @@ COMPATIBLE_MACHINE = "(qoriq)"
PACKAGE_ARCH = "${MACHINE_ARCH}"
PLATFORM = "${MACHINE}"
-PLATFORM_ls1088ardb-pb = "ls1088ardb"
+PLATFORM:ls1088ardb-pb = "ls1088ardb"
PLATFORM_ADDITIONAL_TARGET ??= ""
-PLATFORM_ADDITIONAL_TARGET_ls1012afrwy = "ls1012afrwy_512mb"
+PLATFORM_ADDITIONAL_TARGET:ls1012afrwy = "ls1012afrwy_512mb"
RCW_FOLDER ?= "${MACHINE}"
-RCW_FOLDER_ls1088ardb-pb = "ls1088ardb"
+RCW_FOLDER:ls1088ardb-pb = "ls1088ardb"
# requires CROSS_COMPILE set by hand as there is no configure script
export CROSS_COMPILE="${TARGET_PREFIX}"
@@ -56,16 +56,16 @@ PACKAGECONFIG[optee] = ",,optee-os-qoriq"
uboot_boot_sec ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa-secure-boot"
uboot_boot ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa"
rcw ?= ""
-rcw_ls1012a = "_default"
+rcw:ls1012a = "_default"
rcwsec ?= "_sben"
chassistype ?= "ls2088_1088"
-chassistype_ls1012a = "ls104x_1012"
-chassistype_ls1043a = "ls104x_1012"
-chassistype_ls1046a = "ls104x_1012"
+chassistype:ls1012a = "ls104x_1012"
+chassistype:ls1043a = "ls104x_1012"
+chassistype:ls1046a = "ls104x_1012"
ddrphyopt ?= ""
-ddrphyopt_lx2160a = "fip_ddr_sec"
+ddrphyopt:lx2160a = "fip_ddr_sec"
do_configure[noexec] = "1"
diff --git a/recipes-bsp/atf/qoriq-atf_2.3.bb b/recipes-bsp/atf/qoriq-atf_2.3.bb
index aed32851bc42..2698bd32a99c 100644
--- a/recipes-bsp/atf/qoriq-atf_2.3.bb
+++ b/recipes-bsp/atf/qoriq-atf_2.3.bb
@@ -47,7 +47,7 @@ do_compile() {
if [ "${NXP_COT}" = "true" -a "${ARM_COT}" = "true" ]; then
bbfatal " \
Error!, Both ARM CoT and NXP CoT are enabled. Only one CoT is built in a yocto build, \
- Don't add nxp-cot and arm-cot into DISTRO_FEATURES_append at the same time."
+ Don't add nxp-cot and arm-cot into DISTRO_FEATURES:append at the same time."
fi
if [ "${NXP_COT}" = "true" ]; then
diff --git a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
index 650c1cfded61..6ea16d5be67a 100644
--- a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
+++ b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
@@ -19,5 +19,5 @@ addtask deploy after do_install before do_build
PACKAGE_ARCH = "${MACHINE_SOCARCH}"
COMPATIBLE_MACHINE = "(mx8)"
-COMPATIBLE_MACHINE_mx8m = "(^$)"
-COMPATIBLE_MACHINE_mx8x = "(^$)"
+COMPATIBLE_MACHINE:mx8m = "(^$)"
+COMPATIBLE_MACHINE:mx8x = "(^$)"
diff --git a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb b/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
index 8ff4a3216060..34040b287de7 100644
--- a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
+++ b/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
@@ -65,7 +65,7 @@ do_install() {
# as second one, and for every file match - it creates a separate package,
# which contains only files that matches the pattern.
#
-python populate_packages_prepend() {
+python populate_packages:prepend() {
easrcdir = bb.data.expand('${nonarch_base_libdir}/firmware/imx/easrc', d)
do_split_packages(d, easrcdir, '^easrc-([^_]*).*\.bin',
output_pattern='firmware-imx-easrc-%s',
diff --git a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb b/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
index e996c62de957..fd0c2e742265 100644
--- a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
+++ b/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
@@ -9,7 +9,7 @@ LICENSE = "Proprietary"
DEPENDS = "libnl zlib"
FCC_TOOLS_FOLDER ?= "qca9377_qca6174_arm32"
-FCC_TOOLS_FOLDER_aarch64 = "qca9377_qca6174_arm64"
+FCC_TOOLS_FOLDER:aarch64 = "qca9377_qca6174_arm64"
do_install() {
install -d ${D}${sbindir}/fcc_tools
@@ -17,4 +17,4 @@ do_install() {
}
COMPATIBLE_HOST = '(aarch64|arm).*-linux'
-COMPATIBLE_HOST_libc-musl = 'null'
+COMPATIBLE_HOST:libc-musl = 'null'
diff --git a/recipes-bsp/formfactor/formfactor_%.bbappend b/recipes-bsp/formfactor/formfactor_%.bbappend
index 15f8f4e8c2d4..83cce1310fbb 100644
--- a/recipes-bsp/formfactor/formfactor_%.bbappend
+++ b/recipes-bsp/formfactor/formfactor_%.bbappend
@@ -1,2 +1,2 @@
# Append path for i.MX custom matchconfig
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
diff --git a/recipes-bsp/imx-atf/imx-atf_2.4.bb b/recipes-bsp/imx-atf/imx-atf_2.4.bb
index f4db002be302..536a0a737cab 100644
--- a/recipes-bsp/imx-atf/imx-atf_2.4.bb
+++ b/recipes-bsp/imx-atf/imx-atf_2.4.bb
@@ -27,7 +27,7 @@ EXTRA_OEMAKE += " \
BUILD_OPTEE = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'true', 'false', d)}"
-CFLAGS_remove_mx8mq = "-O2"
+CFLAGS:remove:mx8mq = "-O2"
do_compile() {
# Clear LDFLAGS to avoid the option -Wl recognize issue
diff --git a/recipes-bsp/imx-lib/imx-lib_git.bb b/recipes-bsp/imx-lib/imx-lib_git.bb
index c56190702be9..a296b185da94 100644
--- a/recipes-bsp/imx-lib/imx-lib_git.bb
+++ b/recipes-bsp/imx-lib/imx-lib_git.bb
@@ -20,15 +20,15 @@ S = "${WORKDIR}/git"
inherit use-imx-headers
-PLATFORM_mx6q = "IMX6Q"
-PLATFORM_mx6dl = "IMX6Q"
-PLATFORM_mx6sl = "IMX6S"
-PLATFORM_mx6sll = "IMX6UL"
-PLATFORM_mx6sx = "IMX6S"
-PLATFORM_mx6ul = "IMX6UL"
-PLATFORM_mx6ull = "IMX6UL"
-PLATFORM_mx7d = "IMX7"
-PLATFORM_mx7ulp = "IMX7"
+PLATFORM:mx6q = "IMX6Q"
+PLATFORM:mx6dl = "IMX6Q"
+PLATFORM:mx6sl = "IMX6S"
+PLATFORM:mx6sll = "IMX6UL"
+PLATFORM:mx6sx = "IMX6S"
+PLATFORM:mx6ul = "IMX6UL"
+PLATFORM:mx6ull = "IMX6UL"
+PLATFORM:mx7d = "IMX7"
+PLATFORM:mx7ulp = "IMX7"
PARALLEL_MAKE="-j 1"
EXTRA_OEMAKE = ""
diff --git a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb b/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
index 422670bed322..484db354a75b 100644
--- a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
+++ b/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
@@ -10,8 +10,8 @@ SECTION = "BSP"
inherit use-imx-security-controller-firmware
IMX_EXTRA_FIRMWARE = "firmware-imx-8 imx-sc-firmware imx-seco"
-IMX_EXTRA_FIRMWARE_mx8m = "firmware-imx-8m"
-IMX_EXTRA_FIRMWARE_mx8x = "imx-sc-firmware imx-seco"
+IMX_EXTRA_FIRMWARE:mx8m = "firmware-imx-8m"
+IMX_EXTRA_FIRMWARE:mx8x = "imx-sc-firmware imx-seco"
DEPENDS += " \
u-boot \
${IMX_EXTRA_FIRMWARE} \
@@ -20,7 +20,7 @@ DEPENDS += " \
"
# xxd is a dependency of fspi_packer.sh
DEPENDS += "xxd-native"
-DEPENDS_append_mx8m = " u-boot-mkimage-native dtc-native"
+DEPENDS:append:mx8m = " u-boot-mkimage-native dtc-native"
BOOT_NAME = "imx-boot"
PROVIDES = "${BOOT_NAME}"
@@ -41,7 +41,7 @@ do_compile[depends] += " \
SC_FIRMWARE_NAME ?= "scfw_tcm.bin"
ATF_MACHINE_NAME ?= "bl31-${ATF_PLATFORM}.bin"
-ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
+ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
UBOOT_NAME = "u-boot-${MACHINE}.bin-${UBOOT_CONFIG}"
BOOT_CONFIG_MACHINE = "${BOOT_NAME}-${MACHINE}-${UBOOT_CONFIG}.bin"
@@ -58,20 +58,20 @@ IMXBOOT_TARGETS ?= \
'flash_multi_cores flash_dcd', d), d)}"
BOOT_STAGING = "${S}/${IMX_BOOT_SOC_TARGET}"
-BOOT_STAGING_mx8m = "${S}/iMX8M"
-BOOT_STAGING_mx8dx = "${S}/iMX8QX"
+BOOT_STAGING:mx8m = "${S}/iMX8M"
+BOOT_STAGING:mx8dx = "${S}/iMX8QX"
SOC_FAMILY = "INVALID"
-SOC_FAMILY_mx8 = "mx8"
-SOC_FAMILY_mx8m = "mx8m"
-SOC_FAMILY_mx8x = "mx8x"
+SOC_FAMILY:mx8 = "mx8"
+SOC_FAMILY:mx8m = "mx8m"
+SOC_FAMILY:mx8x = "mx8x"
REV_OPTION ?= ""
-REV_OPTION_mx8qxp = \
+REV_OPTION:mx8qxp = \
"${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', '', \
'REV=C0', d)}"
-compile_mx8m() {
+compile:mx8m() {
bbnote 8MQ/8MM/8MN/8MP boot binary build
for ddr_firmware in ${DDR_FIRMWARE_NAME}; do
bbnote "Copy ddr_firmware: ${ddr_firmware} from ${DEPLOY_DIR_IMAGE} -> ${BOOT_STAGING} "
@@ -88,7 +88,7 @@ compile_mx8m() {
cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME} ${BOOT_STAGING}/bl31.bin
cp ${DEPLOY_DIR_IMAGE}/${UBOOT_NAME} ${BOOT_STAGING}/u-boot.bin
}
-compile_mx8() {
+compile:mx8() {
bbnote 8QM boot binary build
cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME} ${BOOT_STAGING}/scfw_tcm.bin
cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME} ${BOOT_STAGING}/bl31.bin
@@ -100,7 +100,7 @@ compile_mx8() {
fi
}
-compile_mx8x() {
+compile:mx8x() {
bbnote 8QX boot binary build
cp ${DEPLOY_DIR_IMAGE}/${SECO_FIRMWARE_NAME} ${BOOT_STAGING}
cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME} ${BOOT_STAGING}/scfw_tcm.bin
@@ -140,7 +140,7 @@ do_install () {
done
}
-deploy_mx8m() {
+deploy:mx8m() {
install -d ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0644 ${DEPLOY_DIR_IMAGE}/u-boot-spl.bin-${MACHINE}-${UBOOT_CONFIG} \
${DEPLOYDIR}/${BOOT_TOOLS}
@@ -153,7 +153,7 @@ deploy_mx8m() {
install -m 0755 ${BOOT_STAGING}/mkimage_fit_atf.sh ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0755 ${BOOT_STAGING}/mkimage_uboot ${DEPLOYDIR}/${BOOT_TOOLS}
}
-deploy_mx8() {
+deploy:mx8() {
install -d ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0755 ${S}/${TOOLS_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
@@ -162,7 +162,7 @@ deploy_mx8() {
${DEPLOYDIR}/${BOOT_TOOLS}
fi
}
-deploy_mx8x() {
+deploy:mx8x() {
install -d ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
install -m 0755 ${S}/${TOOLS_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
diff --git a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb b/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
index f9943342962e..90e3ebf13ce7 100644
--- a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
+++ b/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
@@ -16,12 +16,12 @@ do_compile () {
cd ${S}
oe_runmake clean
oe_runmake bin
- oe_runmake -C iMX8M -f soc.mak mkimage_imx8
+ oe_runmake -C iMX8M -f soc.mak mkimage:imx8
}
do_install () {
cd ${S}
install -d ${D}${bindir}
- install -m 0755 iMX8M/mkimage_imx8 ${D}${bindir}/mkimage_imx8m
- install -m 0755 mkimage_imx8 ${D}${bindir}/mkimage_imx8
+ install -m 0755 iMX8M/mkimage:imx8 ${D}${bindir}/mkimage_imx8m
+ install -m 0755 mkimage:imx8 ${D}${bindir}/mkimage_imx8
}
diff --git a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
index b8c3d3c3cf4f..6eb65b811aa2 100644
--- a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
+++ b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
@@ -15,10 +15,10 @@ SRC_URI[sha256sum] = "df0fe17c93e4c2835542d6b1b2557524f034e378b643100cd838225e82
BOARD_TYPE ?= "mek"
SC_FIRMWARE_NAME ?= "INVALID"
-SC_FIRMWARE_NAME_mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
-SC_FIRMWARE_NAME_mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
-SC_FIRMWARE_NAME_mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
-SC_FIRMWARE_NAME_mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
+SC_FIRMWARE_NAME:mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
+SC_FIRMWARE_NAME:mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
+SC_FIRMWARE_NAME:mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
+SC_FIRMWARE_NAME:mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
symlink_name = "scfw_tcm.bin"
diff --git a/recipes-bsp/imx-test/imx-test_git.bb b/recipes-bsp/imx-test/imx-test_git.bb
index 118590d5a93b..ad072c5f4d71 100644
--- a/recipes-bsp/imx-test/imx-test_git.bb
+++ b/recipes-bsp/imx-test/imx-test_git.bb
@@ -9,9 +9,9 @@ LICENSE = "GPLv2+"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0-or-later;md5=fed54355545ffd980b814dab4a3b312c"
DEPENDS = "alsa-lib libdrm"
-DEPENDS_append_mx6 = " imx-lib"
-DEPENDS_append_mx7 = " imx-lib"
-DEPENDS_append_imxvpu = " virtual/imxvpu"
+DEPENDS:append:mx6 = " imx-lib"
+DEPENDS:append:mx7 = " imx-lib"
+DEPENDS:append:imxvpu = " virtual/imxvpu"
PE = "1"
PV = "7.0+${SRCPV}"
@@ -29,22 +29,22 @@ inherit module-base use-imx-headers
INHIBIT_PACKAGE_STRIP = "1"
INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-PLATFORM_mx6q = "IMX6Q"
-PLATFORM_mx6dl = "IMX6Q"
-PLATFORM_mx6sl = "IMX6SL"
-PLATFORM_mx6sll = "IMX6SL"
-PLATFORM_mx6sx = "IMX6SX"
-PLATFORM_mx6ul = "IMX6UL"
-PLATFORM_mx7d = "IMX7D"
-PLATFORM_mx7ulp = "IMX7D"
-PLATFORM_mx8 = "IMX8"
+PLATFORM:mx6q = "IMX6Q"
+PLATFORM:mx6dl = "IMX6Q"
+PLATFORM:mx6sl = "IMX6SL"
+PLATFORM:mx6sll = "IMX6SL"
+PLATFORM:mx6sx = "IMX6SX"
+PLATFORM:mx6ul = "IMX6UL"
+PLATFORM:mx7d = "IMX7D"
+PLATFORM:mx7ulp = "IMX7D"
+PLATFORM:mx8 = "IMX8"
PARALLEL_MAKE = "-j 1"
EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}"
PACKAGECONFIG = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)}"
-PACKAGECONFIG_append_imxvpu = " vpu"
-PACKAGECONFIG_append_mx8m = " swpdm"
+PACKAGECONFIG:append:imxvpu = " vpu"
+PACKAGECONFIG:append:mx8m = " swpdm"
PACKAGECONFIG[x11] = ",,libx11 libxdamage libxrender libxrandr"
PACKAGECONFIG[vpu] = "HAS_VPU=true,HAS_VPU=false,virtual/imxvpu"
diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
index 88b9ee0ef218..d362fce3b83e 100644
--- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
+++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
@@ -4,7 +4,7 @@ LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=cd8bc2a79509c22fc9c1782a151210b1"
DEPENDS = "imx-vpu-hantro"
-DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
+DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
SRC_URI = " \
${FSL_MIRROR}/${BP}.tar.gz \
@@ -13,9 +13,9 @@ SRC_URI = " \
SRC_URI[md5sum] = "65417710ef22214523c37f50f34b6ab2"
SRC_URI[sha256sum] = "897d174c4c0818f31012d8a60ed51fc83fdfc55fca2d2b0fc24a0db3e9f3b6e8"
-PLATFORM_mx8mm = "IMX8MM"
-PLATFORM_mx8mq = "IMX8MQ"
-PLATFORM_mx8mp = "IMX8MP"
+PLATFORM:mx8mm = "IMX8MM"
+PLATFORM:mx8mq = "IMX8MQ"
+PLATFORM:mx8mp = "IMX8MP"
EXTRA_OEMAKE = " \
CROSS_COMPILE="${HOST_PREFIX}" \
diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
index 20ac87c747db..d2fc8a1123ac 100644
--- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
+++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
@@ -14,9 +14,9 @@ inherit fsl-eula-unpack use-imx-headers
PARALLEL_MAKE="-j 1"
-PLATFORM_mx8mm = "IMX8MM"
-PLATFORM_mx8mq = "IMX8MQ"
-PLATFORM_mx8mp = "IMX8MP"
+PLATFORM:mx8mm = "IMX8MM"
+PLATFORM:mx8mq = "IMX8MQ"
+PLATFORM:mx8mp = "IMX8MP"
EXTRA_OEMAKE = " \
CROSS_COMPILE="${HOST_PREFIX}" \
diff --git a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb b/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
index ad44065ae576..36c3fee3a7a7 100644
--- a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
+++ b/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
@@ -42,7 +42,7 @@ EXTRA_OECMAKE += " \
-Wno-dev \
"
-do_configure_prepend() {
+do_configure:prepend() {
export SDKTARGETSYSROOT=${STAGING_DIR_HOST}
}
diff --git a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
index 726b1e16d84e..e57a4273bd36 100644
--- a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
+++ b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
@@ -26,15 +26,15 @@ EXTRA_OECONF = "--imx-linux-headers-path=${STAGING_INCDIR_IMX} \
# libg2d. However, that implementation's g2d_alloc() function
# is broken, so we cannot use it.
LIBG2D_PACKAGECONFIG = "g2d"
-LIBG2D_PACKAGECONFIG_imxdpu = ""
+LIBG2D_PACKAGECONFIG:imxdpu = ""
PACKAGECONFIG ?= " "
-PACKAGECONFIG_append_imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
-PACKAGECONFIG_append_imxipu = " ipu"
-PACKAGECONFIG_append_imxpxp = " pxp"
-PACKAGECONFIG_append_mx8m = " ion dwl"
-PACKAGECONFIG_append_mx8qm = " ion"
-PACKAGECONFIG_append_mx8qxp = " ion"
+PACKAGECONFIG:append:imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
+PACKAGECONFIG:append:imxipu = " ipu"
+PACKAGECONFIG:append:imxpxp = " pxp"
+PACKAGECONFIG:append:mx8m = " ion dwl"
+PACKAGECONFIG:append:mx8qm = " ion"
+PACKAGECONFIG:append:mx8qxp = " ion"
HANTRO_CONF = "--hantro-headers-path=${STAGING_INCDIR}/hantro_dec --hantro-decoder-version=G2"
diff --git a/recipes-bsp/mc-utils/mc-utils_git.bb b/recipes-bsp/mc-utils/mc-utils_git.bb
index b3c79b99138e..a2f81fe0dc0a 100644
--- a/recipes-bsp/mc-utils/mc-utils_git.bb
+++ b/recipes-bsp/mc-utils/mc-utils_git.bb
@@ -15,13 +15,13 @@ SRCREV = "8e0b863693fc2ccbc62a62c79b4e3db6da88c16e"
S = "${WORKDIR}/git"
MC_CFG ?= ""
-MC_CFG_ls1088a = "ls1088a"
-MC_CFG_ls2088a = "ls2088a"
-MC_CFG_lx2160a = "lx2160a"
-MC_CFG_lx2162aqds = "lx2162aqds"
+MC_CFG:ls1088a = "ls1088a"
+MC_CFG:ls2088a = "ls2088a"
+MC_CFG:lx2160a = "lx2160a"
+MC_CFG:lx2162aqds = "lx2162aqds"
MC_FLAVOUR ?= "RDB"
-MC_FLAVOUR_lx2162a = ""
+MC_FLAVOUR:lx2162a = ""
do_compile () {
oe_runmake -C config
diff --git a/recipes-bsp/rcw/rcw_git.bb b/recipes-bsp/rcw/rcw_git.bb
index 693506157188..637035b2064c 100644
--- a/recipes-bsp/rcw/rcw_git.bb
+++ b/recipes-bsp/rcw/rcw_git.bb
@@ -17,9 +17,9 @@ export PYTHON = "${USRBINPATH}/python3"
M="${@d.getVar('MACHINE').replace('-64b','').replace('-32b','').replace('-${SITEINFO_ENDIANNESS}','')}"
BOARD_TARGETS="${M}"
-BOARD_TARGETS_ls2088ardb="${M} ${M}_rev1.1"
-BOARD_TARGETS_ls1088ardb-pb="ls1088ardb"
-BOARD_TARGETS_lx2160ardb = "${M} ${M}_rev2"
+BOARD_TARGETS:ls2088ardb="${M} ${M}_rev1.1"
+BOARD_TARGETS:ls1088ardb-pb="ls1088ardb"
+BOARD_TARGETS:lx2160ardb = "${M} ${M}_rev2"
do_compile () {
oe_runmake BOARDS="${BOARD_TARGETS}" DESTDIR=${D}/boot/rcw/
diff --git a/recipes-bsp/u-boot/libubootenv_%.bbappend b/recipes-bsp/u-boot/libubootenv_%.bbappend
index 2633c344739b..619b510e1e1c 100644
--- a/recipes-bsp/u-boot/libubootenv_%.bbappend
+++ b/recipes-bsp/u-boot/libubootenv_%.bbappend
@@ -29,8 +29,8 @@ def fixup_uboot_config_dependency(d):
# | Signed-off-by: Ming Liu <liu.ming50@gmail.com>
# | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
# `----
- ubootmachine = d.getVar("UBOOT_MACHINE_pn-%s" % imx_default_bootloader)
- ubootconfig = (d.getVar("UBOOT_CONFIG_pn-%s" % imx_default_bootloader) or "").split()
+ ubootmachine = d.getVar("UBOOT_MACHINE:pn-%s" % imx_default_bootloader)
+ ubootconfig = (d.getVar("UBOOT_CONFIG:pn-%s" % imx_default_bootloader) or "").split()
d.setVar("UBOOT_CONFIG", ubootconfig)
d.setVar("UBOOT_MACHINE", ubootmachine)
diff --git a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
index 7f02746b060f..2e79166b279a 100644
--- a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
+++ b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
@@ -2,7 +2,7 @@
# Copyright (C) 2014-2016 Freescale Semiconductor
# Copyright 2017-2019 NXP
-FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-fslc:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-fslc:"
require u-boot-fslc_${PV}.bb
require u-boot-mfgtool.inc
diff --git a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb b/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
index 4f97c722dd6f..2e7bde3838f9 100644
--- a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
+++ b/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
@@ -12,7 +12,7 @@ DEPENDS += "bc-native dtc-native python3-setuptools-native"
# Location known to imx-boot component, where U-Boot artifacts
# should be additionally deployed.
-# See below note above do_deploy_append_mx8m for the purpose of
+# See below note above do_deploy:append:mx8m for the purpose of
# this delopyment location
BOOT_TOOLS = "imx-boot-tools"
@@ -48,7 +48,7 @@ EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CPPFLAGS}" \
# starts to use it - below append would not be necessary.
# Once all mx8m derivatives are migrated to use the 'flash.bin' boot
# container - this append can be dropped completely.
-do_deploy_append_mx8m() {
+do_deploy:append:mx8m() {
# Deploy the mkimage, u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for mkimage to generate boot binary
if [ -n "${UBOOT_CONFIG}" ]; then
for config in ${UBOOT_MACHINE}; do
diff --git a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
index 2b296c192909..af5028896a34 100644
--- a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
+++ b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
@@ -2,7 +2,7 @@
# Copyright (C) 2014-2016 Freescale Semiconductor
# Copyright 2017-2019 NXP
-FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-imx:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-imx:"
require u-boot-imx_${PV}.bb
require u-boot-mfgtool.inc
diff --git a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb b/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
index 6a279a12533d..bb5809e2a179 100644
--- a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
+++ b/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
@@ -7,7 +7,7 @@ require u-boot-imx-common_${PV}.inc
PROVIDES += "u-boot"
-do_deploy_append_mx8m() {
+do_deploy:append:mx8m() {
# Deploy u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for mkimage to generate boot binary
if [ -n "${UBOOT_CONFIG}" ]
then
diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb b/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
index 57f2780314c8..b6eee1d931a2 100644
--- a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
+++ b/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
@@ -19,14 +19,14 @@ SRCREV= "f46a944f715f284aff1d42c009680ffe0be4058f"
S = "${WORKDIR}/git"
B = "${WORKDIR}/build"
-PV_append = "+fslgit"
+PV:append = "+fslgit"
LOCALVERSION = "+fsl"
INHIBIT_DEFAULT_DEPS = "1"
DEPENDS = "libgcc virtual/${TARGET_PREFIX}gcc bison-native bc-native swig-native python3-native"
-DEPENDS_append_qoriq-arm64 = " dtc-native"
-DEPENDS_append_qoriq-arm = " dtc-native"
-DEPENDS_append_qoriq-ppc = " boot-format-native"
+DEPENDS:append:qoriq-arm64 = " dtc-native"
+DEPENDS:append:qoriq-arm = " dtc-native"
+DEPENDS:append:qoriq-ppc = " boot-format-native"
python () {
if d.getVar("TCMODE") == "external-fsl":
@@ -41,8 +41,8 @@ python () {
sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib32-linux'
sys_original = d.getVar('TARGET_VENDOR') + '-' + d.getVar('TARGET_OS')
workdir = d.getVar('WORKDIR')
- d.setVar('DEPENDS_append', ' lib32-gcc-cross-powerpc lib32-libgcc')
- d.setVar('PATH_append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
+ d.setVar('DEPENDS:append', ' lib32-gcc-cross-powerpc lib32-libgcc')
+ d.setVar('PATH:append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir + '/lib32-recipe-sysroot')
d.setVar("WRAP_TARGET_PREFIX", 'powerpc' + sys_multilib + '-')
elif "fsl-lsch2-32b:" in arch:
@@ -51,8 +51,8 @@ python () {
sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib64-linux'
sys_original = d.getVar('TARGET_VENDOR') + '-' + d.getVar('TARGET_OS')
workdir = d.getVar('WORKDIR')
- d.setVar('DEPENDS_append', ' lib64-gcc-cross-aarch64 lib64-libgcc')
- d.setVar('PATH_append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
+ d.setVar('DEPENDS:append', ' lib64-gcc-cross-aarch64 lib64-libgcc')
+ d.setVar('PATH:append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir + '/lib64-recipe-sysroot')
d.setVar("WRAP_TARGET_PREFIX", 'aarch64' + sys_multilib + '-')
}
@@ -66,7 +66,7 @@ EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX} CC="${WRAP_TARGET_PREFIX}gcc
EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
EXTRA_OEMAKE += 'STAGING_INCDIR=${STAGING_INCDIR_NATIVE} STAGING_LIBDIR=${STAGING_LIBDIR_NATIVE}'
-do_compile_append_qoriq() {
+do_compile:append:qoriq() {
unset i j k
for config in ${UBOOT_MACHINE}; do
i=`expr $i + 1`;
diff --git a/recipes-connectivity/iproute2/iproute2_%.bbappend b/recipes-connectivity/iproute2/iproute2_%.bbappend
index 4426eca57f1a..0f9b5a87defd 100644
--- a/recipes-connectivity/iproute2/iproute2_%.bbappend
+++ b/recipes-connectivity/iproute2/iproute2_%.bbappend
@@ -1,4 +1,4 @@
-do_install_append () {
+do_install:append () {
install -d ${D}/usr/include/tc
cp -a ${B}/include ${D}/usr/include
cp -a ${B}/tc/*.h ${D}/usr/include/tc
diff --git a/recipes-connectivity/openssl/openssl_%.bbappend b/recipes-connectivity/openssl/openssl_%.bbappend
index ce4ff276e633..e88de3618243 100644
--- a/recipes-connectivity/openssl/openssl_%.bbappend
+++ b/recipes-connectivity/openssl/openssl_%.bbappend
@@ -1,8 +1,8 @@
-FILESEXTRAPATHS_append := "${THISDIR}/${PN}-qoriq:"
+FILESEXTRAPATHS:append := "${THISDIR}/${PN}-qoriq:"
-SRC_URI_append_qoriq = " \
+SRC_URI:append:qoriq = " \
file://0001-eng_devcrypto-add-support-for-TLS-algorithms-offload.patch \
file://0002-eng_devcrypto-add-support-for-TLS1.2-algorithms-offl.patch \
"
-PACKAGECONFIG_append_qoriq = " cryptodev-linux"
+PACKAGECONFIG:append:qoriq = " cryptodev-linux"
diff --git a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
index 000578744ac2..46dfc1245600 100644
--- a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
+++ b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
@@ -1,2 +1,2 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
diff --git a/recipes-core/udev/udev-rules-qoriq.bb b/recipes-core/udev/udev-rules-qoriq.bb
index c328f4ccbd97..e39da44ce7f3 100644
--- a/recipes-core/udev/udev-rules-qoriq.bb
+++ b/recipes-core/udev/udev-rules-qoriq.bb
@@ -18,11 +18,11 @@ RULE_t1024 = "72-fsl-dpaa-persistent-networking.rules"
RULE_qoriq-arm64 = "73-fsl-dpaa-persistent-networking.rules \
73-fsl-enetc-networking.rules \
"
-RULE_ls1046a = "73-fsl-dpaa-persistent-networking.rules \
+RULE:ls1046a = "73-fsl-dpaa-persistent-networking.rules \
74-ls1046a-xfi2-networking.rules \
"
-RULE_ls1012a = ""
-RULE_ls2080a = ""
+RULE:ls1012a = ""
+RULE:ls2080a = ""
do_install () {
install -d ${D}${sysconfdir}/udev/rules.d/
diff --git a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb b/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
index dfd7fdcfcd20..fe43a5e1883e 100644
--- a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
+++ b/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
@@ -32,11 +32,11 @@ python() {
RDEPENDS_${PN}_class-target += "bash"
-EXTRA_OECONF_append_class-target = " --target-list=${@get_qemu_target_list(d)}"
-EXTRA_OECONF_append_class-target_mipsarcho32 = "${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-capstone', '', d)}"
-EXTRA_OECONF_append_class-nativesdk = " --target-list=${@get_qemu_target_list(d)}"
+EXTRA_OECONF:append:class-target = " --target-list=${@get_qemu_target_list(d)}"
+EXTRA_OECONF:append:class-target_mipsarcho32 = "${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-capstone', '', d)}"
+EXTRA_OECONF:append:class-nativesdk = " --target-list=${@get_qemu_target_list(d)}"
-do_install_append_class-nativesdk() {
+do_install:append:class-nativesdk() {
${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)}
}
diff --git a/recipes-devtools/qemu/qemu.inc b/recipes-devtools/qemu/qemu.inc
index bf05da9a4c3a..77d067da7ab2 100644
--- a/recipes-devtools/qemu/qemu.inc
+++ b/recipes-devtools/qemu/qemu.inc
@@ -52,7 +52,7 @@ COMPATIBLE_HOST_mipsarchn64 = "null"
# upstream states qemu doesn't work without optimization
DEBUG_BUILD = "0"
-do_install_append() {
+do_install:append() {
# Prevent QA warnings about installed ${localstatedir}/run
if [ -d ${D}${localstatedir}/run ]; then rmdir ${D}${localstatedir}/run; fi
}
@@ -101,9 +101,9 @@ export LIBTOOL="${HOST_SYS}-libtool"
B = "${WORKDIR}/build"
-EXTRA_OECONF_append = " --python=${HOSTTOOLS_DIR}/python3"
+EXTRA_OECONF:append = " --python=${HOSTTOOLS_DIR}/python3"
-do_configure_prepend_class-native() {
+do_configure:prepend:class-native() {
# Append build host pkg-config paths for native target since the host may provide sdl
BHOST_PKGCONFIG_PATH=$(PATH=/usr/bin:/bin pkg-config --variable pc_path pkg-config || echo "")
if [ ! -z "$BHOST_PKGCONFIG_PATH" ]; then
@@ -127,7 +127,7 @@ do_install () {
# This will trigger a MMU access fault in the virtual CPU. With this change,
# the qemu-mips works fine.
# IMPORTANT: This piece needs to be removed once the root cause is fixed!
-do_install_append() {
+do_install:append() {
if [ -e "${D}/${bindir}/qemu-mips" ]; then
create_wrapper ${D}/${bindir}/qemu-mips \
QEMU_RESERVED_VA=0x0
@@ -147,8 +147,8 @@ make_qemu_wrapper() {
}
# Disable kvm/virgl/mesa on targets that do not support it
-PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+"
-PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+"
+PACKAGECONFIG:remove:darwin = "kvm virglrenderer glx gtk+"
+PACKAGECONFIG:remove:mingw32 = "kvm virglrenderer glx gtk+"
PACKAGECONFIG[sdl] = "--enable-sdl,--disable-sdl,libsdl2"
PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr --enable-cap-ng,--disable-virtfs,libcap-ng attr,"
diff --git a/recipes-dpaa/fm-ucode/fm-ucode_git.bb b/recipes-dpaa/fm-ucode/fm-ucode_git.bb
index 39e4f9d0febb..319a56b33568 100644
--- a/recipes-dpaa/fm-ucode/fm-ucode_git.bb
+++ b/recipes-dpaa/fm-ucode/fm-ucode_git.bb
@@ -13,13 +13,13 @@ SRCREV = "c275e91392e2adab1ed22f3867b8269ca3c54014"
S = "${WORKDIR}/git"
REGLEX ?= "${MACHINE}"
-REGLEX_t1023 = "t1024"
-REGLEX_t1040 = "t1040"
-REGLEX_t1042 = "t1040"
-REGLEX_b4420 = "b4860"
-REGLEX_t4160 = "t4240"
-REGLEX_ls1043a = "ls1043"
-REGLEX_ls1046a = "ls1046"
+REGLEX:t1023 = "t1024"
+REGLEX:t1040 = "t1040"
+REGLEX:t1042 = "t1040"
+REGLEX:b4420 = "b4860"
+REGLEX:t4160 = "t4240"
+REGLEX:ls1043a = "ls1043"
+REGLEX:ls1046a = "ls1046"
do_install () {
UCODE=`echo ${REGLEX} | sed -e 's,-.*$,,' -e 's,[a-zA-Z]*$,,'`
diff --git a/recipes-dpaa2/aiopsl/aiopsl_git.bb b/recipes-dpaa2/aiopsl/aiopsl_git.bb
index a1b0028938e5..794d013c5c2b 100644
--- a/recipes-dpaa2/aiopsl/aiopsl_git.bb
+++ b/recipes-dpaa2/aiopsl/aiopsl_git.bb
@@ -13,8 +13,8 @@ SRCREV = "87d83d8e99770325cc7ad9e10965c9959e7cb828"
do_configure[noexec] = "1"
do_compile[noexec] = "1"
-DEMOS_PATH_ls2088a = "LS2088A"
-DEMOS_PATH_ls1088a = "LS1088A"
+DEMOS_PATH:ls2088a = "LS2088A"
+DEMOS_PATH:ls1088a = "LS1088A"
do_install () {
install -d ${D}/usr/aiop/bin
diff --git a/recipes-dpaa2/management-complex/management-complex_10.14.1.bb b/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
index ddb305c1a36c..69804e9fa68e 100644
--- a/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
+++ b/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
@@ -11,10 +11,10 @@ SRCREV = "408110ee632f6291545b0b156cd74e7e3b4612cc"
S = "${WORKDIR}/git"
-REGLEX_ls2088a = "ls2088a"
-REGLEX_ls2080a = "ls2080a"
-REGLEX_ls1088a = "ls1088a"
-REGLEX_lx2160a = "lx2160a"
+REGLEX:ls2088a = "ls2088a"
+REGLEX:ls2080a = "ls2080a"
+REGLEX:ls1088a = "ls1088a"
+REGLEX:lx2160a = "lx2160a"
do_install () {
install -d ${D}/boot
diff --git a/recipes-dpaa2/management-complex/management-complex_10.20.4.bb b/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
index 3e14a26eabeb..7e0059703738 100644
--- a/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
+++ b/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
@@ -11,10 +11,10 @@ SRCREV = "f73683596a7b72124d67b62e64f3dc2bb36b9321"
S = "${WORKDIR}/git"
-REGLEX_ls2088a = "ls2088a"
-REGLEX_ls2080a = "ls2080a"
-REGLEX_ls1088a = "ls1088a"
-REGLEX_lx2160a = "lx2160a"
+REGLEX:ls2088a = "ls2088a"
+REGLEX:ls2080a = "ls2080a"
+REGLEX:ls1088a = "ls1088a"
+REGLEX:lx2160a = "lx2160a"
do_install () {
install -d ${D}/boot
diff --git a/recipes-dpaa2/management-complex/management-complex_10.24.0.bb b/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
index 17049a15e7c8..12c1a4d89dff 100644
--- a/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
+++ b/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
@@ -11,11 +11,11 @@ SRCREV = "324817697a4c89a9a940fb7dba1b18909913ee20"
S = "${WORKDIR}/git"
-REGLEX_ls2088a = "ls2088a"
-REGLEX_ls2080a = "ls2080a"
-REGLEX_ls1088a = "ls1088a"
-REGLEX_lx2160a = "lx216xa"
-REGLEX_lx2162a = "lx216xa"
+REGLEX:ls2088a = "ls2088a"
+REGLEX:ls2080a = "ls2080a"
+REGLEX:ls1088a = "ls1088a"
+REGLEX:lx2160a = "lx216xa"
+REGLEX:lx2162a = "lx216xa"
do_install () {
install -d ${D}/boot
diff --git a/recipes-extended/dpdk/dpdk.inc b/recipes-extended/dpdk/dpdk.inc
index 61c02ae75f90..2d07187d14fd 100644
--- a/recipes-extended/dpdk/dpdk.inc
+++ b/recipes-extended/dpdk/dpdk.inc
@@ -3,23 +3,23 @@ HOMEPAGE = "http://dpdk.org"
RDEPENDS_${PN} += "python3-core"
DEPENDS = "virtual/kernel openssl"
-DEPENDS_append_x86-64 = " numactl"
+DEPENDS:append:x86-64 = " numactl"
do_configure[depends] += "virtual/kernel:do_shared_workdir"
inherit module
COMPATIBLE_HOST = '(aarch64|arm|i.86|x86_64).*-linux'
-COMPATIBLE_HOST_libc-musl = 'null'
-COMPATIBLE_HOST_armv4 = 'null'
-COMPATIBLE_HOST_armv5 = 'null'
-COMPATIBLE_HOST_armv6 = 'null'
+COMPATIBLE_HOST:libc-musl = 'null'
+COMPATIBLE_HOST:armv4 = 'null'
+COMPATIBLE_HOST:armv5 = 'null'
+COMPATIBLE_HOST:armv6 = 'null'
COMPATIBLE_MACHINE = "(imx|qoriq)"
-DPDK_RTE_TARGET_x86-64 = "x86_64-native-linuxapp-gcc"
-DPDK_RTE_TARGET_x86 = "i686-native-linuxapp-gcc"
-DPDK_RTE_TARGET_armv7a = "${ARCH}-armv7a-linuxapp-gcc"
-DPDK_RTE_TARGET_armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
+DPDK_RTE_TARGET:x86-64 = "x86_64-native-linuxapp-gcc"
+DPDK_RTE_TARGET:x86 = "i686-native-linuxapp-gcc"
+DPDK_RTE_TARGET:armv7a = "${ARCH}-armv7a-linuxapp-gcc"
+DPDK_RTE_TARGET:armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
DPDK_RTE_TARGET ?= "${ARCH}-dpaa-linuxapp-gcc"
export RTE_TARGET = "${DPDK_RTE_TARGET}"
diff --git a/recipes-extended/dpdk/dpdk_19.11-20.12.bb b/recipes-extended/dpdk/dpdk_19.11-20.12.bb
index 426713c2d1d7..37582124b021 100644
--- a/recipes-extended/dpdk/dpdk_19.11-20.12.bb
+++ b/recipes-extended/dpdk/dpdk_19.11-20.12.bb
@@ -13,7 +13,7 @@ SRCREV = "7071c27f6f5aefb57de1cffab3484707b1e82e2b"
include dpdk.inc
-do_install_append () {
+do_install:append () {
# Remove the unneeded dir
rm -rf ${D}/${datadir}/${RTE_TARGET}/app
}
diff --git a/recipes-extended/jailhouse/jailhouse_0.12.bb b/recipes-extended/jailhouse/jailhouse_0.12.bb
index c49d7f5b194e..a83592d24f1f 100644
--- a/recipes-extended/jailhouse/jailhouse_0.12.bb
+++ b/recipes-extended/jailhouse/jailhouse_0.12.bb
@@ -39,9 +39,9 @@ CELLCONF_DIR ?= "${JH_DATADIR}/configs"
INMATES_DIR ?= "${JH_DATADIR}/inmates"
JH_CONFIG ?= "${S}/ci/jailhouse-config-x86.h"
-JH_CONFIG_x86 ?= "${S}/ci/jailhouse-config-x86.h"
-JH_CONFIG_x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
-JH_CONFIG_arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
+JH_CONFIG:x86 ?= "${S}/ci/jailhouse-config-x86.h"
+JH_CONFIG:x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
+JH_CONFIG:arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
do_configure() {
if [ -d ${STAGING_DIR_HOST}/${CELLCONF_DIR} ];
diff --git a/recipes-extended/odp/odp-counters_git.bb b/recipes-extended/odp/odp-counters_git.bb
index 860dd5faf450..9d88ea43edee 100644
--- a/recipes-extended/odp/odp-counters_git.bb
+++ b/recipes-extended/odp/odp-counters_git.bb
@@ -2,7 +2,7 @@ require odp.inc
inherit module
-do_compile_prepend () {
+do_compile:prepend () {
export KERNEL_PATH="${STAGING_KERNEL_DIR}"
export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
cd ${S}/test/debug/perf_counters
diff --git a/recipes-extended/odp/odp-module_git.bb b/recipes-extended/odp/odp-module_git.bb
index 46b896547a91..8bcdcd81573d 100644
--- a/recipes-extended/odp/odp-module_git.bb
+++ b/recipes-extended/odp/odp-module_git.bb
@@ -2,7 +2,7 @@ require odp.inc
inherit module
-do_compile_prepend () {
+do_compile:prepend () {
export KERNEL_PATH="${STAGING_KERNEL_DIR}"
export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
cd ${S}/kern
diff --git a/recipes-extended/odp/odp.inc b/recipes-extended/odp/odp.inc
index 129f77ae108b..d1e10b0f94d4 100644
--- a/recipes-extended/odp/odp.inc
+++ b/recipes-extended/odp/odp.inc
@@ -6,7 +6,7 @@ SECTION = "console/network"
LICENSE = "BSD-3-Clause"
LIC_FILES_CHKSUM = "file://LICENSE;md5=ca6103dc75397fb6bec596187d6b7829"
-FILESEXTRAPATHS_prepend := "${THISDIR}/odp:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/odp:"
SRC_URI = " \
git://source.codeaurora.org/external/qoriq/qoriq-components/odp;nobranch=1 \
diff --git a/recipes-extended/odp/odp_git.bb b/recipes-extended/odp/odp_git.bb
index 00575e24d5a8..bfe251ed6bda 100644
--- a/recipes-extended/odp/odp_git.bb
+++ b/recipes-extended/odp/odp_git.bb
@@ -9,14 +9,14 @@ DEPENDS = "openssl cunit libxml2"
RDEPENDS_${PN} = "bash libcrypto libssl odp-module odp-counters"
ODP_SOC ?= ""
-ODP_SOC_ls1043ardb = "LS1043"
-ODP_SOC_ls1046ardb = "LS1046"
+ODP_SOC:ls1043ardb = "LS1043"
+ODP_SOC:ls1046ardb = "LS1046"
ODP_PLATFORM ?= "linux-dpaa2"
ODP_BUILD_TYPE ?= "ls2088"
-ODP_BUILD_TYPE_ls1043ardb = "ls1043"
-ODP_BUILD_TYPE_ls1046ardb = "ls1046"
-ODP_BUILD_TYPE_ls2080ardb = "ls2080"
-ODP_BUILD_TYPE_ls1088ardb = "ls1088"
+ODP_BUILD_TYPE:ls1043ardb = "ls1043"
+ODP_BUILD_TYPE:ls1046ardb = "ls1046"
+ODP_BUILD_TYPE:ls2080ardb = "ls2080"
+ODP_BUILD_TYPE:ls1088ardb = "ls1088"
EXTRA_OECONF = "--with-platform=${ODP_PLATFORM} \
--enable-test-vald \
@@ -34,17 +34,17 @@ CFLAGS += "-Wno-format-truncation -Wno-maybe-uninitialized -Wno-implicit-fallthr
PACKAGECONFIG[perf] = "--enable-test-perf,,,"
-do_configure_prepend () {
+do_configure:prepend () {
export SOC=${ODP_SOC}
${S}/bootstrap
}
-do_compile_prepend () {
+do_compile:prepend () {
export SOC=${ODP_SOC}
export ARCH=${TUNE_ARCH}
}
-do_install_append () {
+do_install:append () {
install -d ${D}${includedir}/odp/kni
install -d ${D}${includedir}/odp/kern
install -d ${D}${includedir}/odp/flib/mc
diff --git a/recipes-extended/procps/procps_%.bbappend b/recipes-extended/procps/procps_%.bbappend
index face0ccc0f61..43fb349b8de2 100644
--- a/recipes-extended/procps/procps_%.bbappend
+++ b/recipes-extended/procps/procps_%.bbappend
@@ -1,4 +1,4 @@
-do_install_append_qoriq-ppc() {
+do_install:append:qoriq-ppc() {
for keyword in \
net.ipv4.conf.default.rp_filter \
net.ipv4.conf.all.rp_filter \
diff --git a/recipes-extended/testfloat/testfloat_2a.bb b/recipes-extended/testfloat/testfloat_2a.bb
index 800cef3d172e..6777249f39e3 100644
--- a/recipes-extended/testfloat/testfloat_2a.bb
+++ b/recipes-extended/testfloat/testfloat_2a.bb
@@ -6,7 +6,7 @@ LIC_FILES_CHKSUM = "file://testfloat/testfloat.txt;beginline=87;endline=95;md5=b
SRC_URI = " http://www.jhauser.us/arithmetic/TestFloat-2a.tar.Z;name=TestFloat \
http://www.jhauser.us/arithmetic/SoftFloat-2b.tar.Z;name=SoftFloat \
"
-SRC_URI_append_qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
+SRC_URI:append:qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
file://TestFloat-powerpc-E500v2-SPE-1.patch \
file://Yocto-replace-COMPILE_PREFIX-gcc.patch \
"
diff --git a/recipes-extended/tsntool/tsntool_git.bb b/recipes-extended/tsntool/tsntool_git.bb
index 8ef79d27c8bd..ea452f7c82f3 100644
--- a/recipes-extended/tsntool/tsntool_git.bb
+++ b/recipes-extended/tsntool/tsntool_git.bb
@@ -14,7 +14,7 @@ S = "${WORKDIR}/git"
do_configure[depends] += "virtual/kernel:do_shared_workdir"
-do_compile_prepend() {
+do_compile:prepend() {
mkdir -p ${S}/include/linux
cp -r ${STAGING_KERNEL_DIR}/include/uapi/linux/tsn.h ${S}/include/linux
}
diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
index 4ad257ee9364..9229e26683a6 100644
--- a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
+++ b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
@@ -3,7 +3,7 @@ DESCRIPTION = "Add packages for ISP build"
inherit packagegroup
ISP_PKGS ?= ""
-ISP_PKGS_mx8mp = " \
+ISP_PKGS:mx8mp = " \
isp-imx \
basler-camera \
basler-camera-dev \
diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
index aeba762386f3..acadd526bc61 100644
--- a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
+++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
@@ -10,4 +10,4 @@ RDEPENDS_${PN} = " \
"
COMPATIBLE_HOST = '(aarch64|arm).*-linux'
-COMPATIBLE_HOST_libc-musl = 'null'
+COMPATIBLE_HOST:libc-musl = 'null'
diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
index 43df5a70e670..233e3d00fa92 100644
--- a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
+++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
@@ -9,4 +9,4 @@ RDEPENDS_${PN} = " \
firmware-qca9377 \
"
COMPATIBLE_HOST = '(aarch64|arm).*-linux'
-COMPATIBLE_HOST_libc-musl = 'null'
+COMPATIBLE_HOST:libc-musl = 'null'
diff --git a/recipes-graphics/cairo/cairo_%.bbappend b/recipes-graphics/cairo/cairo_%.bbappend
index 5b1562ab8b4d..2c73c7f32f25 100644
--- a/recipes-graphics/cairo/cairo_%.bbappend
+++ b/recipes-graphics/cairo/cairo_%.bbappend
@@ -1,2 +1,2 @@
-PACKAGECONFIG_append_imxgpu3d = " egl glesv2"
-PACKAGECONFIG_remove_imxgpu3d = "opengl"
+PACKAGECONFIG:append:imxgpu3d = " egl glesv2"
+PACKAGECONFIG:remove:imxgpu3d = "opengl"
diff --git a/recipes-graphics/drm/libdrm_2.4.102.imx.bb b/recipes-graphics/drm/libdrm_2.4.102.imx.bb
index 6935b7822b63..371d2e1775d8 100644
--- a/recipes-graphics/drm/libdrm_2.4.102.imx.bb
+++ b/recipes-graphics/drm/libdrm_2.4.102.imx.bb
@@ -64,10 +64,10 @@ FILES_${PN}-etnaviv = "${libdir}/libdrm_etnaviv.so.*"
BBCLASSEXTEND = "native nativesdk"
-PACKAGES_prepend_imxgpu = "${PN}-vivante "
-RRECOMMENDS_${PN}-drivers_append_imxgpu = " ${PN}-vivante"
+PACKAGES:prepend:imxgpu = "${PN}-vivante "
+RRECOMMENDS_${PN}-drivers:append:imxgpu = " ${PN}-vivante"
FILES_${PN}-vivante = "${libdir}/libdrm_vivante.so.*"
-PACKAGECONFIG_append_imxgpu = " vivante"
+PACKAGECONFIG:append:imxgpu = " vivante"
PACKAGECONFIG[vivante] = "-Dvivante=true,-Dvivante=false"
PACKAGE_ARCH = "${MACHINE_SOCARCH}"
diff --git a/recipes-graphics/gtk+/gtk+3_%.bbappend b/recipes-graphics/gtk+/gtk+3_%.bbappend
index be2bac75fbf8..2f108a274b0f 100644
--- a/recipes-graphics/gtk+/gtk+3_%.bbappend
+++ b/recipes-graphics/gtk+/gtk+3_%.bbappend
@@ -1,5 +1,5 @@
-DEPENDS_append_imxgpu2d = " virtual/egl"
+DEPENDS:append:imxgpu2d = " virtual/egl"
-PACKAGECONFIG_remove_imxgpu2d = " \
+PACKAGECONFIG:remove:imxgpu2d = " \
${@bb.utils.contains("DISTRO_FEATURES", "wayland", "x11", "", d)} \
"
diff --git a/recipes-graphics/images/core-image-weston.bbappend b/recipes-graphics/images/core-image-weston.bbappend
index 2a3cde69a8cd..77d2fe747801 100644
--- a/recipes-graphics/images/core-image-weston.bbappend
+++ b/recipes-graphics/images/core-image-weston.bbappend
@@ -1,3 +1,3 @@
# FIXME: i.MX6SL cannot use mesa for Graphics and it lacks GL support,
# so for now we skip it.
-CORE_IMAGE_BASE_INSTALL_remove_mx6sl = "clutter-1.0-examples"
+CORE_IMAGE_BASE_INSTALL:remove:mx6sl = "clutter-1.0-examples"
diff --git a/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb b/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
index 65ce9cd567b4..d0ac10bdb9a2 100644
--- a/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
+++ b/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
@@ -11,16 +11,16 @@ S = "${WORKDIR}/git"
inherit cmake pkgconfig perlnative python3native
-PACKAGECONFIG_BACKEND_mx6 = " \
+PACKAGECONFIG_BACKEND:mx6 = " \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'waffle', \
bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', \
'', d), d)} \
"
-PACKAGECONFIG_BACKEND_mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
-PACKAGECONFIG_BACKEND_mx8 = "waffle"
+PACKAGECONFIG_BACKEND:mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
+PACKAGECONFIG_BACKEND:mx8 = "waffle"
PACKAGECONFIG_GPU2D = ""
-PACKAGECONFIG_GPU2D_imxgpu2d = "vivante"
+PACKAGECONFIG_GPU2D:imxgpu2d = "vivante"
PACKAGECONFIG ??= " \
egl \
diff --git a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
index 91a5542bd7a4..4c732ff2feb0 100644
--- a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
+++ b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
@@ -17,8 +17,8 @@ DEPENDS += " \
${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'libxcb libxshmfence libxxf86vm', \
'', d)} \
"
-DEPENDS_append_imxdrm = " libdrm wayland"
-DEPENDS_append_mx8 = " patchelf-native"
+DEPENDS:append:imxdrm = " libdrm wayland"
+DEPENDS:append:mx8 = " patchelf-native"
# imx-gpu-viv does not provide everything it needs to for virtual/libgl
# on x11 backend or on Wayland backend with XWayland support.
@@ -26,19 +26,19 @@ DEPENDS_append_mx8 = " patchelf-native"
DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'mesa', '', d)}"
EXTRA_PROVIDES = ""
-EXTRA_PROVIDES_append_imxgpu3d = " \
+EXTRA_PROVIDES:append:imxgpu3d = " \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'virtual/libgl', \
bb.utils.contains('DISTRO_FEATURES', 'x11', 'virtual/libgl', \
'', d), d)} \
virtual/libgles1 \
virtual/libgles2 \
"
-EXTRA_PROVIDES_append_mx8 = " \
+EXTRA_PROVIDES:append:mx8 = " \
virtual/libgbm \
"
PROVIDES_OPENVX = ""
-PROVIDES_OPENVX_mx8 = "virtual/libopenvx"
-PROVIDES_OPENVX_mx8mm = ""
+PROVIDES_OPENVX:mx8 = "virtual/libopenvx"
+PROVIDES_OPENVX:mx8mm = ""
PROVIDES += " \
imx-gpu-viv \
libgal-imx \
@@ -52,13 +52,13 @@ PROVIDES += " \
${EXTRA_PROVIDES} \
"
-RPROVIDES_${PN}_imxgpu3d += "imx-gpu-viv"
+RPROVIDES_${PN}:imxgpu3d += "imx-gpu-viv"
PE = "1"
inherit fsl-eula-unpack features_check
-REQUIRED_DISTRO_FEATURES_mx8 = "wayland"
+REQUIRED_DISTRO_FEATURES:mx8 = "wayland"
SRC_URI = "${FSL_MIRROR}/${BPN}-${PV}.bin;fsl-eula=true"
@@ -69,7 +69,7 @@ PACKAGECONFIG[valgrind] = ""
# Note : If you add a package here, to prevent a naming conflict see the python_anonymous() futher below
IMX_PACKAGES_GBM = ""
-IMX_PACKAGES_GBM_mx8 = "libgbm-imx libgbm-imx-dev"
+IMX_PACKAGES_GBM:mx8 = "libgbm-imx libgbm-imx-dev"
PACKAGES =+ "libclc-imx libclc-imx-dev \
libgl-imx libgl-imx-dev \
libgles1-imx libgles1-imx-dev \
@@ -140,21 +140,21 @@ python __anonymous() {
}
IS_MX6SL = "0"
-IS_MX6SL_mx6sl = "1"
+IS_MX6SL:mx6sl = "1"
IS_MX8 = "0"
-IS_MX8_mx8 = "1"
+IS_MX8:mx8 = "1"
PACKAGE_FP_TYPE = "hardfp"
HAS_GBM = "false"
-HAS_GBM_mx8 = "true"
+HAS_GBM:mx8 = "true"
GLES3_HEADER_REMOVALS = "gl31.h gl32.h"
-GLES3_HEADER_REMOVALS_mx8m = "gl32.h"
-GLES3_HEADER_REMOVALS_mx8mm = "gl31.h gl32.h"
-GLES3_HEADER_REMOVALS_mx8qxp = ""
-GLES3_HEADER_REMOVALS_mx8qm = ""
+GLES3_HEADER_REMOVALS:mx8m = "gl32.h"
+GLES3_HEADER_REMOVALS:mx8mm = "gl31.h gl32.h"
+GLES3_HEADER_REMOVALS:mx8qxp = ""
+GLES3_HEADER_REMOVALS:mx8qm = ""
do_install () {
install -d ${D}${libdir}
@@ -291,9 +291,9 @@ INSANE_SKIP_libgal-imx += "build-deps"
FILES_libvsc-imx = "${libdir}/libVSC${SOLIBS}"
-FILES_libgbm-imx_mx8 = "${libdir}/libgbm*${REALSOLIBS} ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
-FILES_libgbm-imx-dev_mx8 = "${libdir}/pkgconfig/gbm.pc ${includedir}/gbm.h"
-RDEPENDS_libgbm-imx_append_mx8 = " libdrm"
+FILES_libgbm-imx:mx8 = "${libdir}/libgbm*${REALSOLIBS} ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
+FILES_libgbm-imx-dev:mx8 = "${libdir}/pkgconfig/gbm.pc ${includedir}/gbm.h"
+RDEPENDS_libgbm-imx:append:mx8 = " libdrm"
INSANE_SKIP_libgbm-imx += "dev-so"
FILES_libvulkan-imx = "${libdir}/libvulkan_VSI${REALSOLIBS} ${libdir}/libSPIRV_viv${SOLIBS}"
@@ -358,10 +358,10 @@ INSANE_SKIP_libgc-wayland-protocol-imx += "dev-so"
FILES_libgc-wayland-protocol-imx = "${libdir}/libgc_wayland_protocol${REALSOLIBS} ${libdir}/libgc_wayland_protocol${SOLIBS}"
FILES_libgc-wayland-protocol-imx-dev = "${libdir}/libgc_wayland_protocol${SOLIBSDEV} ${libdir}/pkgconfig/gc_wayland_protocol.pc"
-FILES_imx-gpu-viv-tools = "${bindir}/gmem_info"
+FILES:imx-gpu-viv-tools = "${bindir}/gmem_info"
-FILES_imx-gpu-viv-demos = "/opt"
-INSANE_SKIP_imx-gpu-viv-demos += "rpaths dev-deps"
+FILES:imx-gpu-viv-demos = "/opt"
+INSANE_SKIP:imx-gpu-viv-demos += "rpaths dev-deps"
FILES_libnn-imx = "${libdir}/libNN*${SOLIBS} ${libdir}/libnn*${SOLIBS} ${libdir}/libneuralnetworks${SOLIBS}"
FILES_libnn-imx-dev = "${includedir}/nnrt"
diff --git a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
index 5b82b3f4639b..71baa53d82ef 100644
--- a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
+++ b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
@@ -1,5 +1,5 @@
# Append EGL_CFLAGS to CFLAGS
-CFLAGS_append_imxgpu = " \
+CFLAGS:append:imxgpu = " \
${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-DEGL_API_FB', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-DWL_EGL_PLATFORM', '', d)} \
"
diff --git a/recipes-graphics/libsdl2/libsdl2_%.bbappend b/recipes-graphics/libsdl2/libsdl2_%.bbappend
index 303ea63a7cf2..af9c97bb6e97 100644
--- a/recipes-graphics/libsdl2/libsdl2_%.bbappend
+++ b/recipes-graphics/libsdl2/libsdl2_%.bbappend
@@ -1,8 +1,8 @@
# what vivante driver does libsdl2 mean? Anyway it fails with missing functions as
# VIVANTE_Create VIVANTE_GLES_GetProcAddress VIVANTE_GLES_UnloadLibrary ...
-EXTRA_OECONF_append_imxgpu2d = " --disable-video-vivante"
+EXTRA_OECONF:append:imxgpu2d = " --disable-video-vivante"
-CFLAGS_append_imxgpu = " -DLINUX \
+CFLAGS:append:imxgpu = " -DLINUX \
${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-DEGL_API_FB', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-DWL_EGL_PLATFORM', '', d)} \
"
diff --git a/recipes-graphics/mesa/mesa-demos_%.bbappend b/recipes-graphics/mesa/mesa-demos_%.bbappend
index 301f1b59f125..4b518185119b 100644
--- a/recipes-graphics/mesa/mesa-demos_%.bbappend
+++ b/recipes-graphics/mesa/mesa-demos_%.bbappend
@@ -1,26 +1,26 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
-SRC_URI_append_imxgpu = " file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
+SRC_URI:append:imxgpu = " file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
file://fix-clear-build-break.patch \
file://Add-OpenVG-demos-to-support-wayland.patch"
PACKAGECONFIG_REMOVE_IF_2D_ONLY = ""
-PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu2d = "gles1 gles2"
-PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu3d = ""
+PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu2d = "gles1 gles2"
+PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu3d = ""
PACKAGECONFIG_REMOVE_IF_GPU = ""
-PACKAGECONFIG_REMOVE_IF_GPU_imxgpu = " \
+PACKAGECONFIG_REMOVE_IF_GPU:imxgpu = " \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'glu x11', '', d)} \
"
-PACKAGECONFIG_remove = " \
+PACKAGECONFIG:remove = " \
${PACKAGECONFIG_REMOVE_IF_2D_ONLY} \
${PACKAGECONFIG_REMOVE_IF_GPU} \
"
PACKAGECONFIG_APPEND_IF_GPU = ""
-PACKAGECONFIG_APPEND_IF_GPU_imxgpu = " \
+PACKAGECONFIG_APPEND_IF_GPU:imxgpu = " \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland vg', '', d)} \
${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glut', '', d)} \
"
-PACKAGECONFIG_append = " \
+PACKAGECONFIG:append = " \
${PACKAGECONFIG_APPEND_IF_GPU} \
"
diff --git a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb b/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
index 2a32c448f436..c58c2cf30dc9 100644
--- a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
+++ b/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
@@ -12,7 +12,7 @@ SRC_URI = "\
do_configure[noexec] = "1"
do_compile[noexec] = "1"
-do_install_use-mainline-bsp() {
+do_install:use-mainline-bsp() {
# MESA global envirronment variables
# systemd
diff --git a/recipes-graphics/mesa/mesa-gl_%.bbappend b/recipes-graphics/mesa/mesa-gl_%.bbappend
index ca1c8f46d680..dafd27f0a68e 100644
--- a/recipes-graphics/mesa/mesa-gl_%.bbappend
+++ b/recipes-graphics/mesa/mesa-gl_%.bbappend
@@ -1 +1 @@
-COMPATIBLE_MACHINE_imxgpu = "(-)"
+COMPATIBLE_MACHINE:imxgpu = "(-)"
diff --git a/recipes-graphics/mesa/mesa_%.bbappend b/recipes-graphics/mesa/mesa_%.bbappend
index 423ee63ec638..d0b55cacea4b 100644
--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@@ -1,5 +1,5 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
-SRC_URI_append_use-mainline-bsp = " \
+FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
+SRC_URI:append:use-mainline-bsp = " \
file://0001-dri-add-createImageWithModifiers2-interface.patch \
file://0002-dri-add-loader_dri_create_image-helper.patch \
file://0003-loader-dri3-convert-to-loader_dri_create_image.patch \
@@ -11,11 +11,11 @@ SRC_URI_append_use-mainline-bsp = " \
file://0009-etnaviv-flush-used-render-buffers-on-context-flush-w.patch \
"
-PROVIDES_remove_imxgpu = "virtual/egl"
-PROVIDES_remove_imxgpu3d = "virtual/libgl virtual/libgles1 virtual/libgles2"
+PROVIDES:remove:imxgpu = "virtual/egl"
+PROVIDES:remove:imxgpu3d = "virtual/libgl virtual/libgles1 virtual/libgles2"
-PACKAGECONFIG_remove_imxgpu = "egl gbm"
-PACKAGECONFIG_remove_imxgpu3d = "gles"
+PACKAGECONFIG:remove:imxgpu = "egl gbm"
+PACKAGECONFIG:remove:imxgpu3d = "gles"
# FIXME: mesa should support 'x11-no-tls' option
python () {
@@ -28,13 +28,13 @@ python () {
}
# Enable Etnaviv and Freedreno support
-PACKAGECONFIG_append_use-mainline-bsp = " gallium etnaviv kmsro freedreno"
+PACKAGECONFIG:append:use-mainline-bsp = " gallium etnaviv kmsro freedreno"
# For NXP BSP, GPU drivers don't support dri
-PACKAGECONFIG_remove_imxgpu_use-nxp-bsp = "dri"
+PACKAGECONFIG:remove:imxgpu:use-nxp-bsp = "dri"
# mainline/etnaviv:
-RRECOMMENDS_${PN}-megadriver_append_use-mainline-bsp = " libdrm-etnaviv mesa-etnaviv-env"
+RRECOMMENDS_${PN}-megadriver:append:use-mainline-bsp = " libdrm-etnaviv mesa-etnaviv-env"
BACKEND = \
"${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', \
@@ -42,7 +42,7 @@ BACKEND = \
'fb', d), d)}"
# FIXME: Dirty hack to allow use of Vivante GPU libGL binary
-do_install_append_imxgpu3d () {
+do_install:append:imxgpu3d () {
rm -f ${D}${libdir}/libGL.* \
${D}${includedir}/GL/gl.h \
${D}${includedir}/GL/glcorearb.h \
@@ -54,6 +54,6 @@ do_install_append_imxgpu3d () {
fi
}
-do_install_append_imxgpu () {
+do_install:append:imxgpu () {
rm -rf ${D}${includedir}/KHR
}
diff --git a/recipes-graphics/vulkan/vulkan-loader_%.bbappend b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
index 28e1dc32fcce..1e4d181ce3e5 100644
--- a/recipes-graphics/vulkan/vulkan-loader_%.bbappend
+++ b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
@@ -1,3 +1,3 @@
# The i.MX implementation is dynamically loaded, so it requires an
# explicit runtime dependency.
-RRECOMMENDS_${PN}_append_imxgpu = " libvulkan-imx"
+RRECOMMENDS_${PN}:append:imxgpu = " libvulkan-imx"
diff --git a/recipes-graphics/waffle/waffle_%.bbappend b/recipes-graphics/waffle/waffle_%.bbappend
index 9d090bcfe2b0..380273a8c55c 100644
--- a/recipes-graphics/waffle/waffle_%.bbappend
+++ b/recipes-graphics/waffle/waffle_%.bbappend
@@ -1,4 +1,4 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
SRC_URI += " \
file://0001-meson-Add-missing-wayland-dependency-on-EGL.patch \
@@ -6,11 +6,11 @@ SRC_URI += " \
"
PACKAGECONFIG_IMXGPU_X11 = ""
-PACKAGECONFIG_IMXGPU_X11_imxgpu3d = "x11-egl glx"
+PACKAGECONFIG_IMXGPU_X11:imxgpu3d = "x11-egl glx"
PACKAGECONFIG_IMXGPU_GBM = "gbm"
-PACKAGECONFIG_IMXGPU_GBM_mx6 = ""
-PACKAGECONFIG_IMXGPU_GBM_mx7 = ""
-PACKAGECONFIG_imxgpu = " \
+PACKAGECONFIG_IMXGPU_GBM:mx6 = ""
+PACKAGECONFIG_IMXGPU_GBM:mx7 = ""
+PACKAGECONFIG:imxgpu = " \
${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', \
bb.utils.contains('DISTRO_FEATURES', 'x11', '${PACKAGECONFIG_IMXGPU_X11}', \
'', d), d)} \
diff --git a/recipes-graphics/wayland/weston-init.bbappend b/recipes-graphics/wayland/weston-init.bbappend
index ebd982687b19..5710e9b5ecad 100644
--- a/recipes-graphics/wayland/weston-init.bbappend
+++ b/recipes-graphics/wayland/weston-init.bbappend
@@ -1,24 +1,24 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
# OpenGL is not required for parts with GPU support for 2D but not 3D
IMX_REQUIRED_DISTRO_FEATURES_REMOVE = ""
-IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu2d = "opengl"
-IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu3d = ""
-REQUIRED_DISTRO_FEATURES_remove = "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
+IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu2d = "opengl"
+IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu3d = ""
+REQUIRED_DISTRO_FEATURES:remove = "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
-SRC_URI_append_mx6sl = " file://weston.config"
+SRC_URI:append:mx6sl = " file://weston.config"
# To customize weston.ini, start by setting the desired assignment in weston.ini,
# commented out. For example:
# #xwayland=true
# Then add the assignment to INI_UNCOMMENT_ASSIGNMENTS.
-INI_UNCOMMENT_ASSIGNMENTS_append_imx = " \
+INI_UNCOMMENT_ASSIGNMENTS:append:imx = " \
${@bb.utils.contains('DISTRO_FEATURES', 'x11 wayland', 'xwayland=true', '', d)} \
"
-INI_UNCOMMENT_ASSIGNMENTS_append_mx8 = " \
+INI_UNCOMMENT_ASSIGNMENTS:append:mx8 = " \
repaint-window=16 \
"
-INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
+INI_UNCOMMENT_ASSIGNMENTS:append:mx8mq = " \
gbm-format=argb8888 \
\\[shell\\] \
size=1920x1080 \
@@ -27,10 +27,10 @@ INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
# FIXME: The 8QM and 8QXP SoCs have better performance without G2D so don't enable it
# Ideally, this should be seamless and Vivante ought to handle it internally and take the fastest
# rendering code.
-INI_UNCOMMENT_USE_G2D_imxgpu2d ?= "use-g2d=1"
-INI_UNCOMMENT_USE_G2D_mx8qm = ""
-INI_UNCOMMENT_USE_G2D_mx8qxp = ""
-INI_UNCOMMENT_ASSIGNMENTS_append_imxgpu2d = " \
+INI_UNCOMMENT_USE_G2D:imxgpu2d ?= "use-g2d=1"
+INI_UNCOMMENT_USE_G2D:mx8qm = ""
+INI_UNCOMMENT_USE_G2D:mx8qxp = ""
+INI_UNCOMMENT_ASSIGNMENTS:append:imxgpu2d = " \
${INI_UNCOMMENT_USE_G2D} \
"
@@ -41,7 +41,7 @@ uncomment() {
sed -i -e 's,^#'"$1"','"$1"',g' $2
}
-do_install_append() {
+do_install:append() {
if [ -f "${WORKDIR}/weston.config" ]; then
install -Dm0755 ${WORKDIR}/weston.config ${D}${sysconfdir}/default/weston
fi
diff --git a/recipes-graphics/wayland/weston_9.0.0.imx.bb b/recipes-graphics/wayland/weston_9.0.0.imx.bb
index 026f27cebe8b..16607a93c4d2 100644
--- a/recipes-graphics/wayland/weston_9.0.0.imx.bb
+++ b/recipes-graphics/wayland/weston_9.0.0.imx.bb
@@ -20,7 +20,7 @@ SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
file://0001-tests-include-fcntl.h-for-open-O_RDWR-O_CLOEXEC-and-.patch \
"
-SRC_URI_append_libc-musl = " file://dont-use-plane-add-prop.patch "
+SRC_URI:append:libc-musl = " file://dont-use-plane-add-prop.patch "
SRC_URI[sha256sum] = "5cf5d6ce192e0eb15c1fc861a436bf21b5bb3b91dbdabbdebe83e1f83aa098fe"
@@ -97,7 +97,7 @@ PACKAGECONFIG[shell-ivi] = "-Dshell-ivi=true,-Dshell-ivi=false"
# JPEG image loading support
PACKAGECONFIG[image-jpeg] = "-Dimage-jpeg=true,-Dimage-jpeg=false, jpeg"
-do_install_append() {
+do_install:append() {
# Weston doesn't need the .la files to load modules, so wipe them
rm -f ${D}/${libdir}/libweston-${WESTON_MAJOR_VERSION}/*.la
@@ -160,23 +160,23 @@ S = "${WORKDIR}/git"
# Disable OpenGL for parts with GPU support for 2D but not 3D
REQUIRED_DISTRO_FEATURES = "opengl"
-REQUIRED_DISTRO_FEATURES_imxgpu2d = ""
-REQUIRED_DISTRO_FEATURES_imxgpu3d = "opengl"
+REQUIRED_DISTRO_FEATURES:imxgpu2d = ""
+REQUIRED_DISTRO_FEATURES:imxgpu3d = "opengl"
PACKAGECONFIG_OPENGL = "opengl"
-PACKAGECONFIG_OPENGL_imxgpu2d = ""
-PACKAGECONFIG_OPENGL_imxgpu3d = "opengl"
+PACKAGECONFIG_OPENGL:imxgpu2d = ""
+PACKAGECONFIG_OPENGL:imxgpu3d = "opengl"
-PACKAGECONFIG_remove = "wayland x11"
-PACKAGECONFIG_append = " ${@bb.utils.filter('DISTRO_FEATURES', '${PACKAGECONFIG_OPENGL}', d)}"
+PACKAGECONFIG:remove = "wayland x11"
+PACKAGECONFIG:append = " ${@bb.utils.filter('DISTRO_FEATURES', '${PACKAGECONFIG_OPENGL}', d)}"
-PACKAGECONFIG_remove_imxfbdev = "kms"
-PACKAGECONFIG_append_imxfbdev = " fbdev clients"
-PACKAGECONFIG_append_imxgpu = " imxgpu"
-PACKAGECONFIG_append_imxgpu2d = " imxg2d"
+PACKAGECONFIG:remove:imxfbdev = "kms"
+PACKAGECONFIG:append:imxfbdev = " fbdev clients"
+PACKAGECONFIG:append:imxgpu = " imxgpu"
+PACKAGECONFIG:append:imxgpu2d = " imxg2d"
# Clients support
SIMPLE_CLIENTS = "all"
-SIMPLE_CLIENTS_imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
+SIMPLE_CLIENTS:imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
PACKAGECONFIG[xwayland] = "-Dxwayland=true,-Dxwayland=false,libxcursor"
PACKAGECONFIG[clients] = "-Dsimple-clients=${SIMPLE_CLIENTS} -Ddemo-clients=true,-Dsimple-clients= -Ddemo-clients=false"
# Weston with i.MX GPU support
diff --git a/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend b/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
index a9c60f3ec4f9..d112b274a75d 100644
--- a/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
+++ b/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
@@ -1,2 +1,2 @@
# Append path for freescale layer to include bsp pointercal.xinput
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
diff --git a/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb b/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb
index 069008c04479..836a16ba08cc 100644
--- a/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb
+++ b/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb
@@ -34,7 +34,7 @@ TARGET_CC_ARCH += "${LDFLAGS}"
PACKAGES =+ "xserver-xorg-extension-viv-autohdmi"
-do_install_append () {
+do_install:append () {
install -d ${D}${includedir}
cp -axr ${S}/EXA/src/vivante_gal/vivante_priv.h ${D}${includedir}
cp -axr ${S}/EXA/src/vivante_gal/vivante_gal.h ${D}${includedir}
diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend b/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
index ceb438e37115..3fe677b34770 100644
--- a/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
@@ -1,2 +1,2 @@
# Append path for freescale layer to include bsp xorg.conf
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
diff --git a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
index 22d950c796cc..34e2ed82377b 100644
--- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
@@ -1,7 +1,7 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
-SRC_URI_append_use-mainline-bsp = " file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
-SRC_URI_append_imxgpu = " \
+SRC_URI:append:use-mainline-bsp = " file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
+SRC_URI:append:imxgpu = " \
file://0003-Remove-check-for-useSIGIO-option.patch \
file://0001-MGS-5186-Per-Specification-EGL_NATIVE_PIXMAP_KHR-req.patch \
file://0001-glamor-glamor_egl.c-EGL_NATIVE_PIXMAP_KHR-do-not-req.patch \
@@ -10,7 +10,7 @@ SRC_URI_append_imxgpu = " \
"
IMX_OPENGL_PKGCONFIGS_REMOVE = ""
-IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
-OPENGL_PKGCONFIGS_remove_mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
-OPENGL_PKGCONFIGS_remove_mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
-OPENGL_PKGCONFIGS_remove_imxdrm = "dri glx"
+IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
+OPENGL_PKGCONFIGS:remove:mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
+OPENGL_PKGCONFIGS:remove:mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
+OPENGL_PKGCONFIGS:remove:imxdrm = "dri glx"
diff --git a/recipes-graphics/xwayland/xwayland_%.bbappend b/recipes-graphics/xwayland/xwayland_%.bbappend
index c26bb20d2caf..b3e79e09182f 100644
--- a/recipes-graphics/xwayland/xwayland_%.bbappend
+++ b/recipes-graphics/xwayland/xwayland_%.bbappend
@@ -1,4 +1,4 @@
IMX_OPENGL_PKGCONFIGS_REMOVE = ""
-IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
-OPENGL_PKGCONFIGS_remove_mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
-OPENGL_PKGCONFIGS_remove_mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
+IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
+OPENGL_PKGCONFIGS:remove:mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
+OPENGL_PKGCONFIGS:remove:mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
diff --git a/recipes-kernel/ceetm/ceetm_git.bb b/recipes-kernel/ceetm/ceetm_git.bb
index 2e92ad49e5a4..45c3f19edc1a 100644
--- a/recipes-kernel/ceetm/ceetm_git.bb
+++ b/recipes-kernel/ceetm/ceetm_git.bb
@@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=bac620b9883d38a84dfb73ca7122d915"
SRC_URI = "git://source.codeaurora.org/external/qoriq/qoriq-components/ceetm;nobranch=1"
SRCREV = "6a7f2ec2091df2f4380cb8d25a36c399aed5af1b"
-SRC_URI_append = " file://0001-Makefile-update-CFLAGS.patch \
+SRC_URI:append = " file://0001-Makefile-update-CFLAGS.patch \
file://0001-use-new-api-tc_print_rate.patch \
"
DEPENDS = "iproute2"
diff --git a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
index feddc8faac80..36e2065db7c4 100644
--- a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
+++ b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
@@ -14,7 +14,7 @@ export KERNEL_PATH
INHIBIT_PACKAGE_STRIP = "1"
-do_compile_prepend() {
+do_compile:prepend() {
sed -i -e 's,EXTRA_CFLAGS += -I$(PWD),EXTRA_CFLAGS += -I${S},' ${S}/armodule/source/Makefile
}
diff --git a/recipes-kernel/kernel-modules/kernel-module-ipc.inc b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
index 350ba186aeb2..903c53a48731 100644
--- a/recipes-kernel/kernel-modules/kernel-module-ipc.inc
+++ b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
@@ -11,7 +11,7 @@ SRCREV = "74d662707558290f070f9589177db730444bc435"
S = "${WORKDIR}/git"
do_configure[depends] += "virtual/kernel:do_shared_workdir"
-do_compile_prepend () {
+do_compile:prepend () {
cd ${S}/kernel
}
diff --git a/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
index 0b23a47c04bb..a7b8a4e68ce7 100644
--- a/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
+++ b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
@@ -20,4 +20,4 @@ EXTRA_OEMAKE += " \
"
COMPATIBLE_MACHINE = "(imx)"
-COMPATIBLE_HOST_libc-musl = 'null'
+COMPATIBLE_HOST:libc-musl = 'null'
diff --git a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
index 63527d1324cc..95dd72fb894c 100644
--- a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
+++ b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
@@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by the Freescale Community \
that produces a Manufacturing Tool compatible Linux Kernel to be used in updater \
environment"
-FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
require linux-fslc-lts_${PV}.bb
require linux-mfgtool.inc
diff --git a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
index c155ebb969ed..09d35c9152ea 100644
--- a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
+++ b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
@@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by the Freescale Community \
that produces a Manufacturing Tool compatible Linux Kernel to be used in updater \
environment"
-FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
require linux-fslc_${PV}.bb
require linux-mfgtool.inc
--git a/recipes-kernel/linux/linux-imx-headers_5.10.bb b/recipes-kernel/linux/linux-imx-headers_5.10.bb
index c656fa557e26..05e8b12c5bfe 100644
--- a/recipes-kernel/linux/linux-imx-headers_5.10.bb
+++ b/recipes-kernel/linux/linux-imx-headers_5.10.bb
@@ -75,4 +75,4 @@ PACKAGE_ARCH = "${MACHINE_SOCARCH}"
# Restrict this recipe to NXP BSP only, this recipe is not compatible
# with mainline BSP
COMPATIBLE_HOST = '(null)'
-COMPATIBLE_HOST_use-nxp-bsp = '.*'
+COMPATIBLE_HOST:use-nxp-bsp = '.*'
diff --git a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
index 0a9f5259ed94..311245b19b6d 100644
--- a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
+++ b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
@@ -5,7 +5,7 @@ SUMMARY = "Produces a Manufacturing Tool compatible Linux Kernel"
DESCRIPTION = "Linux Kernel provided and supported by Freescale that produces a \
Manufacturing Tool compatible Linux Kernel to be used in updater environment"
-FILESEXTRAPATHS_prepend := "${THISDIR}/linux-imx:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/linux-imx:"
require linux-imx_${PV}.bb
require linux-mfgtool.inc
diff --git a/recipes-kernel/linux/linux-qoriq.inc b/recipes-kernel/linux/linux-qoriq.inc
index 4d134b476599..2333990fb79c 100644
--- a/recipes-kernel/linux/linux-qoriq.inc
+++ b/recipes-kernel/linux/linux-qoriq.inc
@@ -7,12 +7,12 @@ LICENSE = "GPLv2"
S = "${WORKDIR}/git"
-DEPENDS_append = " libgcc"
+DEPENDS:append = " libgcc"
# not put Images into /boot of rootfs, install kernel-image if needed
RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
-KERNEL_CC_append = " ${TOOLCHAIN_OPTIONS}"
-KERNEL_LD_append = " ${TOOLCHAIN_OPTIONS}"
+KERNEL_CC:append = " ${TOOLCHAIN_OPTIONS}"
+KERNEL_LD:append = " ${TOOLCHAIN_OPTIONS}"
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
ZIMAGE_BASE_NAME = "zImage-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}"
@@ -24,9 +24,9 @@ PV = "${LINUX_VERSION}+git${SRCPV}"
SCMVERSION ?= "y"
LOCALVERSION = ""
DELTA_KERNEL_DEFCONFIG ?= ""
-DELTA_KERNEL_DEFCONFIG_prepend_qoriq-arm64 = "lsdk.config "
-DELTA_KERNEL_DEFCONFIG_prepend_fsl-lsch2-32b = "multi_v7_lpae.config multi_v8.config lsdk.config "
-DELTA_KERNEL_DEFCONFIG_prepend_ls102xa = "multi_v7_lpae.config lsdk.config "
+DELTA_KERNEL_DEFCONFIG:prepend:qoriq-arm64 = "lsdk.config "
+DELTA_KERNEL_DEFCONFIG:prepend:fsl-lsch2-32b = "multi_v7_lpae.config multi_v8.config lsdk.config "
+DELTA_KERNEL_DEFCONFIG:prepend:ls102xa = "multi_v7_lpae.config lsdk.config "
do_merge_delta_config[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot bison-native:do_populate_sysroot"
do_merge_delta_config[dirs] = "${B}"
@@ -56,11 +56,11 @@ do_merge_delta_config() {
addtask merge_delta_config before do_kernel_localversion after do_patch
# The link of dts folder is needed for 32b compile of aarch64 targets(e.g. ls1043ardb-32b)
-do_compile_prepend_fsl-lsch2-32b() {
+do_compile:prepend:fsl-lsch2-32b() {
ln -sfT ${STAGING_KERNEL_DIR}/arch/arm64/boot/dts/freescale ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
}
-do_install_prepend_fsl-lsch2-32b() {
+do_install:prepend:fsl-lsch2-32b() {
rm -f ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
}
diff --git a/recipes-multimedia/alsa/alsa-lib_%.bbappend b/recipes-multimedia/alsa/alsa-lib_%.bbappend
index 80c11f33204f..d76c45d1e162 100644
--- a/recipes-multimedia/alsa/alsa-lib_%.bbappend
+++ b/recipes-multimedia/alsa/alsa-lib_%.bbappend
@@ -1,4 +1,4 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
IMX_PATCH = " \
file://0001-add-conf-for-multichannel-support-in-imx.patch \
@@ -6,6 +6,6 @@ IMX_PATCH = " \
file://0005-add-ak4458-conf-for-multichannel-support.patch \
file://0006-add-conf-for-iMX-XCVR-sound-card.patch \
"
-SRC_URI_append_imx = "${IMX_PATCH}"
+SRC_URI:append:imx = "${IMX_PATCH}"
-PACKAGE_ARCH_imx = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:imx = "${MACHINE_SOCARCH}"
diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
index 3f1ec99d9560..cf640e13779e 100644
--- a/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
+++ b/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
@@ -50,8 +50,8 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-os=linux \
--cross-prefix='${HOST_PREFIX}'"
# Disable assembly optimizations for X32, as this libav lacks the support
-PACKAGECONFIG_remove_linux-gnux32 = "yasm"
-LIBAV_EXTRA_CONFIGURE_COMMON_ARG_append_linux-gnux32 = " --disable-asm"
+PACKAGECONFIG:remove:linux-gnux32 = "yasm"
+LIBAV_EXTRA_CONFIGURE_COMMON_ARG:append:linux-gnux32 = " --disable-asm"
LIBAV_EXTRA_CONFIGURE_COMMON = \
'${LIBAV_EXTRA_CONFIGURE}="${LIBAV_EXTRA_CONFIGURE_COMMON_ARG}"'
@@ -63,8 +63,8 @@ FILES_${PN}-dev += "${libdir}/gstreamer-1.0/*.la"
FILES_${PN}-staticdev += "${libdir}/gstreamer-1.0/*.a"
# http://errors.yoctoproject.org/Errors/Details/20493/
-ARM_INSTRUCTION_SET_armv4 = "arm"
-ARM_INSTRUCTION_SET_armv5 = "arm"
+ARM_INSTRUCTION_SET:armv4 = "arm"
+ARM_INSTRUCTION_SET:armv5 = "arm"
# ffmpeg/libav disables PIC on some platforms (e.g. x86-32)
INSANE_SKIP_${PN} = "textrel"
diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb
index 6925611ac080..376764583179 100644
--- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb
+++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb
@@ -1,14 +1,14 @@
require recipes-multimedia/gstreamer/gstreamer1.0-plugins-common.inc
-DEPENDS_append_imxgpu2d = " virtual/libg2d"
-DEPENDS_append_mx8 = " libdrm"
+DEPENDS:append:imxgpu2d = " virtual/libg2d"
+DEPENDS:append:mx8 = " libdrm"
-PACKAGECONFIG_append_mx8 = " kms"
+PACKAGECONFIG:append:mx8 = " kms"
DEFAULT_PREFERENCE = "-1"
-PACKAGE_ARCH_imxpxp = "${MACHINE_SOCARCH}"
-PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:imxpxp = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
GST1.0-PLUGINS-BAD_SRC ?= "gitsm://source.codeaurora.org/external/imx/gst-plugins-bad.git;protocol=https"
SRCBRANCH = "MM_04.05.07_2011_L5.4.70"
@@ -37,7 +37,7 @@ DEPENDS += "gstreamer1.0-plugins-base"
inherit gobject-introspection
PACKAGECONFIG_GL ?= "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gl', '', d)}"
-PACKAGECONFIG_GL_imxpxp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2', '', d)}"
+PACKAGECONFIG_GL:imxpxp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2', '', d)}"
PACKAGECONFIG ??= " \
${GSTREAMER_ORC} \
@@ -163,8 +163,8 @@ EXTRA_OEMESON += " \
export OPENCV_PREFIX = "${STAGING_DIR_TARGET}${prefix}"
-ARM_INSTRUCTION_SET_armv4 = "arm"
-ARM_INSTRUCTION_SET_armv5 = "arm"
+ARM_INSTRUCTION_SET:armv4 = "arm"
+ARM_INSTRUCTION_SET:armv5 = "arm"
FILES_${PN}-freeverb += "${datadir}/gstreamer-1.0/presets/GstFreeverb.prs"
FILES_${PN}-opencv += "${datadir}/gst-plugins-bad/1.0/opencv*"
diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend
index d92bdf3ca3c2..1c62f31dc227 100644
--- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend
+++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend
@@ -1,5 +1,5 @@
-PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
-PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
+PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
+PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
# For mainline BSP we need to enable 'gbm' Window system
-PACKAGECONFIG_GL_use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm', '', d)}"
+PACKAGECONFIG_GL:use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm', '', d)}"
diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb
index db0b740fa22b..01db6125d67d 100644
--- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb
+++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb
@@ -20,7 +20,7 @@ SRC_URI = "${GST1.0-PLUGINS-BASE_SRC};branch=${SRCBRANCH} \
S = "${WORKDIR}/git"
DEPENDS += "iso-codes util-linux zlib"
-DEPENDS_append_imxgpu2d = " virtual/libg2d"
+DEPENDS:append:imxgpu2d = " virtual/libg2d"
inherit use-imx-headers gobject-introspection gtk-doc
diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend
index 8565c6a53377..7e72cdaa2273 100644
--- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend
+++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend
@@ -1,3 +1,3 @@
-PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
-PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
-PACKAGECONFIG_GL_use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
+PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
+PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
+PACKAGECONFIG_GL:use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
index 7c6025dd900e..439c4430f407 100644
--- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
+++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
@@ -28,22 +28,22 @@ inherit pkgconfig meson use-imx-headers
# is needed to improve performance.
LIBG2D_DPU_OPTION = "-Dg2d-based-on-dpu=false"
LIBG2D_DEPENDENCIES = "virtual/libg2d"
-LIBG2D_DPU_OPTION_imxdpu = "-Dg2d-based-on-dpu=true"
-LIBG2D_DEPENDENCIES_imxdpu = "virtual/libg2d libdrm"
+LIBG2D_DPU_OPTION:imxdpu = "-Dg2d-based-on-dpu=true"
+LIBG2D_DEPENDENCIES:imxdpu = "virtual/libg2d libdrm"
EXTRA_OEMESON += "-Dimx-headers-path=${STAGING_INCDIR_IMX}"
PACKAGECONFIG ?= "uniaudiodec"
-PACKAGECONFIG_append_imxgpu2d = " g2d"
-PACKAGECONFIG_append_imxvpu = " vpu"
-PACKAGECONFIG_append_imxipu = " ipu"
-PACKAGECONFIG_append_imxpxp = " pxp"
+PACKAGECONFIG:append:imxgpu2d = " g2d"
+PACKAGECONFIG:append:imxvpu = " vpu"
+PACKAGECONFIG:append:imxipu = " ipu"
+PACKAGECONFIG:append:imxpxp = " pxp"
# The custom imxv4l2 elements are only available on the i.MX6.
# The 2D blitter sinks require an MXC framebuffer, which
# is not available anymore on the i.MX8 (since these SoCs
# now use KMS instead of the old Linux framebuffer).
-PACKAGECONFIG_append_mx6 = " imx2dvideosink v4l2"
-PACKAGECONFIG_append_mx7 = " imx2dvideosink"
+PACKAGECONFIG:append:mx6 = " imx2dvideosink v4l2"
+PACKAGECONFIG:append:mx7 = " imx2dvideosink"
PACKAGECONFIG[g2d] = "-Dg2d=enabled ${LIBG2D_DPU_OPTION},-Dg2d=disabled,${LIBG2D_DEPENDENCIES}"
PACKAGECONFIG[pxp] = "-Dpxp=enabled,-Dpxp=disabled,"
diff --git a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
index c8bb6cd8a45a..9f58aa64d5dc 100644
--- a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
+++ b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
@@ -8,9 +8,9 @@ LICENSE = "GPLv2 & LGPLv2 & LGPLv2.1"
SECTION = "multimedia"
DEPENDS = "imx-codec imx-parser gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-bad"
-DEPENDS_append_mx6 = " imx-lib"
-DEPENDS_append_mx7 = " imx-lib"
-DEPENDS_append_imxvpu = " imx-vpuwrap libdrm"
+DEPENDS:append:mx6 = " imx-lib"
+DEPENDS:append:mx7 = " imx-lib"
+DEPENDS:append:imxvpu = " imx-vpuwrap libdrm"
# For backwards compatibility
RREPLACES_${PN} = "gst1.0-fsl-plugin"
@@ -31,14 +31,14 @@ S = "${WORKDIR}/git"
inherit autotools pkgconfig use-imx-headers
-PLATFORM_mx6 = "MX6"
-PLATFORM_mx6sl = "MX6SL"
-PLATFORM_mx6sx = "MX6SX"
-PLATFORM_mx6ul = "MX6UL"
-PLATFORM_mx6sll = "MX6SLL"
-PLATFORM_mx7= "MX7D"
-PLATFORM_mx7ulp= "MX7ULP"
-PLATFORM_mx8 = "MX8"
+PLATFORM:mx6 = "MX6"
+PLATFORM:mx6sl = "MX6SL"
+PLATFORM:mx6sx = "MX6SX"
+PLATFORM:mx6ul = "MX6UL"
+PLATFORM:mx6sll = "MX6SLL"
+PLATFORM:mx7= "MX7D"
+PLATFORM:mx7ulp= "MX7ULP"
+PLATFORM:mx8 = "MX8"
# Todo add a mechanism to map possible build targets
EXTRA_OECONF = "PLATFORM=${PLATFORM} \
@@ -55,7 +55,7 @@ RDEPENDS_${PN} += "imx-parser ${BEEP_RDEPENDS} gstreamer1.0-plugins-good-id3demu
# overlaysink rely on G2D,
# cannot be supported on i.MX6SLL & i.MX6UL & i.MX6ULL & i.MX7D
PACKAGECONFIG ?= ""
-PACKAGECONFIG_imxgpu2d = "overlaysink"
+PACKAGECONFIG:imxgpu2d = "overlaysink"
# FIXME: Add all features
diff --git a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
index 76a52f26cb64..4bb76030ed62 100644
--- a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
+++ b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
@@ -21,14 +21,14 @@ EXTRA_OECONF = "${@bb.utils.contains('TUNE_FEATURES', 'aarch64', '--enable-armv8
bb.utils.contains('TUNE_FEATURES', 'callconvention-hard', '--enable-fhw', '', d), d)}"
PACKAGECONFIG ?= ""
-PACKAGECONFIG_imxvpu = "vpu"
+PACKAGECONFIG:imxvpu = "vpu"
# We need to ensure we don't have '-src' package overrided
PACKAGE_DEBUG_SPLIT_STYLE = 'debug-without-src'
PACKAGECONFIG[vpu] = "--enable-vpu,--disable-vpu,virtual/imxvpu"
-do_install_append() {
+do_install:append() {
# LTIB move the files around or gst-fsl-plugin won't find them
for p in $(find ${D}${libdir}/imx-mm -mindepth 2 -maxdepth 2 -not -type d); do
mv $p ${D}${libdir}
@@ -85,7 +85,7 @@ python __set_metapkg_rdepends() {
codec_pkgs = oe.utils.packages_filter_out_system(d)
codec_pkgs = filter(lambda x: x not in ['imx-codec-test-bin', 'imx-codec-test-source'],
codec_pkgs)
- d.appendVar('RDEPENDS_imx-codec-meta', ' ' + ' '.join(codec_pkgs))
+ d.appendVar('RDEPENDS:imx-codec-meta', ' ' + ' '.join(codec_pkgs))
}
PACKAGESPLITFUNCS =+ "__split_libfslcodec_plugins __set_metapkg_rdepends"
diff --git a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
index 2b0282351840..f77e33f76d07 100644
--- a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
+++ b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
@@ -8,7 +8,7 @@ SECTION = "multimedia"
LIC_FILES_CHKSUM = "file://COPYING;md5=228c72f2a91452b8a03c4cab30f30ef9"
DEPENDS = "virtual/imxvpu"
-DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
+DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
SRC_URI = "git://github.com/NXP/imx-vpuwrap.git;protocol=https;branch=${SRCBRANCH}"
@@ -19,7 +19,7 @@ S = "${WORKDIR}/git"
inherit autotools pkgconfig
-do_install_append() {
+do_install:append() {
# FIXME: Drop examples for now
rm -r ${D}${datadir}
}
diff --git a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
index f66eff27568c..372d78dcb859 100644
--- a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
+++ b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
@@ -15,10 +15,10 @@ S = "${WORKDIR}/git"
inherit waf pkgconfig use-imx-headers
-IMX_PLATFORM_mx6 = "imx6"
-IMX_PLATFORM_mx8mq = "imx8m"
-IMX_PLATFORM_mx8mm = "imx8mm"
-IMX_PLATFORM_mx8mp = "imx8mm"
+IMX_PLATFORM:mx6 = "imx6"
+IMX_PLATFORM:mx8mq = "imx8m"
+IMX_PLATFORM:mx8mm = "imx8mm"
+IMX_PLATFORM:mx8mp = "imx8mm"
EXTRA_OECONF = "--imx-platform=${IMX_PLATFORM} --libdir=${libdir} --imx-headers=${STAGING_INCDIR_IMX} --sysroot-path=${RECIPE_SYSROOT}"
diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
index 78a17864724a..ae69be4c8601 100644
--- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
+++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
@@ -1,21 +1,21 @@
-CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
+CACHED_CONFIGUREVARS:append:mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/imx:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}/imx:"
-SRC_URI_append_mx6 = " file://daemon.conf file://default.pa"
-SRC_URI_append_mx7 = " file://daemon.conf file://default.pa \
+SRC_URI:append:mx6 = " file://daemon.conf file://default.pa"
+SRC_URI:append:mx7 = " file://daemon.conf file://default.pa \
file://pulseaudio-remove-the-control-for-speaker-headphone-widge.patch \
"
-SRC_URI_append_mx8 = " file://daemon.conf file://default.pa"
+SRC_URI:append:mx8 = " file://daemon.conf file://default.pa"
-do_install_append() {
+do_install:append() {
if [ -e "${WORKDIR}/daemon.conf" ] && [ -e "${WORKDIR}/default.pa" ]; then
install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
fi
}
-PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
-PACKAGE_ARCH_mx7 = "${MACHINE_SOCARCH}"
-PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:mx6 = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:mx7 = "${MACHINE_SOCARCH}"
+PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
diff --git a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
index 58b6b8a45b18..b2ac77483ef8 100644
--- a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
+++ b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
@@ -21,8 +21,8 @@ inherit python3native systemd
SYSTEMD_SERVICE_${PN} = "tee-supplicant.service"
OPTEE_ARCH ?= "arm32"
-OPTEE_ARCH_armv7a = "arm32"
-OPTEE_ARCH_aarch64 = "arm64"
+OPTEE_ARCH:armv7a = "arm32"
+OPTEE_ARCH:aarch64 = "arm64"
EXTRA_OEMAKE = "ARCH=${OPTEE_ARCH} O=${B}"
diff --git a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
index 712b1aa69046..c0b3b7631269 100644
--- a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
+++ b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
@@ -22,23 +22,23 @@ inherit deploy python3native autotools
# The platform flavor corresponds to the Yocto machine without the leading 'i'.
PLATFORM_FLAVOR = "${@d.getVar('MACHINE')[1:]}"
-PLATFORM_FLAVOR_imx6qpdlsolox = "mx6qsabresd"
-PLATFORM_FLAVOR_imx6ul7d = "mx6ulevk"
-PLATFORM_FLAVOR_imx6ull14x14evk = "mx6ullevk"
-PLATFORM_FLAVOR_imx6ull9x9evk = "mx6ullevk"
-PLATFORM_FLAVOR_imx6ulz-14x14-evk = "mx6ulzevk"
-PLATFORM_FLAVOR_mx8mq = "mx8mqevk"
-PLATFORM_FLAVOR_mx8mm = "mx8mmevk"
-PLATFORM_FLAVOR_mx8mn = "mx8mnevk"
-PLATFORM_FLAVOR_mx8mp = "mx8mpevk"
-PLATFORM_FLAVOR_mx8qm = "mx8qmmek"
-PLATFORM_FLAVOR_mx8qxp = "mx8qxpmek"
-PLATFORM_FLAVOR_mx8dx = "mx8dxmek"
-PLATFORM_FLAVOR_mx8dxl = "mx8dxlevk"
+PLATFORM_FLAVOR:imx6qpdlsolox = "mx6qsabresd"
+PLATFORM_FLAVOR:imx6ul7d = "mx6ulevk"
+PLATFORM_FLAVOR:imx6ull14x14evk = "mx6ullevk"
+PLATFORM_FLAVOR:imx6ull9x9evk = "mx6ullevk"
+PLATFORM_FLAVOR:imx6ulz-14x14-evk = "mx6ulzevk"
+PLATFORM_FLAVOR:mx8mq = "mx8mqevk"
+PLATFORM_FLAVOR:mx8mm = "mx8mmevk"
+PLATFORM_FLAVOR:mx8mn = "mx8mnevk"
+PLATFORM_FLAVOR:mx8mp = "mx8mpevk"
+PLATFORM_FLAVOR:mx8qm = "mx8qmmek"
+PLATFORM_FLAVOR:mx8qxp = "mx8qxpmek"
+PLATFORM_FLAVOR:mx8dx = "mx8dxmek"
+PLATFORM_FLAVOR:mx8dxl = "mx8dxlevk"
OPTEE_ARCH ?= "arm32"
-OPTEE_ARCH_armv7a = "arm32"
-OPTEE_ARCH_aarch64 = "arm64"
+OPTEE_ARCH:armv7a = "arm32"
+OPTEE_ARCH:aarch64 = "arm64"
# Optee-os can be built for 32 bits and 64 bits at the same time
# as long as the compilers are correctly defined.
diff --git a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
index a8a1b245e496..4a6aec56dd45 100644
--- a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
+++ b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
@@ -20,11 +20,11 @@ SRCREV = "0c998f42a3fb87b9f2929955cf4b0116cc515091"
inherit python3native
OPTEE_ARCH ?= "arm32"
-OPTEE_ARCH_armv7a = "arm32"
-OPTEE_ARCH_aarch64 = "arm64"
+OPTEE_ARCH:armv7a = "arm32"
+OPTEE_ARCH:aarch64 = "arm64"
TA_DEV_KIT_DIR_arm = "${STAGING_INCDIR}/optee/export-user_ta_arm32/"
-TA_DEV_KIT_DIR_aarch64 = "${STAGING_INCDIR}/optee/export-user_ta_arm64/"
+TA_DEV_KIT_DIR:aarch64 = "${STAGING_INCDIR}/optee/export-user_ta_arm64/"
CFLAGS += "--sysroot=${STAGING_DIR_HOST}"
CXXFLAGS += "--sysroot=${STAGING_DIR_HOST}"
diff --git a/recipes-security/optee/optee-os-qoriq_3.8.0.bb b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
index b8d764ff5e12..556f13518d7e 100644
--- a/recipes-security/optee/optee-os-qoriq_3.8.0.bb
+++ b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
@@ -19,9 +19,9 @@ SRCREV = "0cb01f7f6aee552ead49990c06f69f73f459cc65"
S = "${WORKDIR}/git"
OPTEEMACHINE ?= "${MACHINE}"
-OPTEEMACHINE_ls1088ardb-pb = "ls1088ardb"
-OPTEEMACHINE_ls1046afrwy = "ls1046ardb"
-OPTEEMACHINE_lx2162aqds = "lx2160aqds"
+OPTEEMACHINE:ls1088ardb-pb = "ls1088ardb"
+OPTEEMACHINE:ls1046afrwy = "ls1046ardb"
+OPTEEMACHINE:lx2162aqds = "lx2160aqds"
EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE} CFG_ARM64_core=y \
ARCH=arm \
@@ -31,10 +31,10 @@ EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE} CFG_ARM64_core=y \
LDFLAGS= \
LIBGCC_LOCATE_CFLAGS=--sysroot=${STAGING_DIR_HOST} \
"
-EXTRA_OEMAKE_append_lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-lx2160a-qds.dts CFG_EMBED_DT=y"
+EXTRA_OEMAKE:append:lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-lx2160a-qds.dts CFG_EMBED_DT=y"
-OPTEE_ARCH_armv7a = "arm32"
-OPTEE_ARCH_aarch64 = "arm64"
+OPTEE_ARCH:armv7a = "arm32"
+OPTEE_ARCH:aarch64 = "arm64"
do_compile() {
unset LDFLAGS
diff --git a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch b/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch
index c5a64387f525..7fdf1dd8a62b 100644
--- a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch
+++ b/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch
@@ -21,10 +21,10 @@ index 56ca9e310..99b7a33f6 100644
set(filter_srcs "${CMAKE_CURRENT_LIST_DIR}/src/tinyxml2/tinyxml2.cpp")
if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
-- ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override") # GCC
-+ ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override -Os") # GCC
+- ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override") # GCC
++ ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override -Os") # GCC
elseif(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
- ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-inconsistent-missing-override") # Clang
+ ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-inconsistent-missing-override") # Clang
endif()
--
2.28.0
diff --git a/recipes-support/opencv/opencv_4.5.2.imx.bb b/recipes-support/opencv/opencv_4.5.2.imx.bb
index a86fd3ecb3da..402eab9bb52d 100644
--- a/recipes-support/opencv/opencv_4.5.2.imx.bb
+++ b/recipes-support/opencv/opencv_4.5.2.imx.bb
@@ -11,8 +11,8 @@ SECTION = "libs"
LICENSE = "Apache-2.0"
LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
-ARM_INSTRUCTION_SET_armv4 = "arm"
-ARM_INSTRUCTION_SET_armv5 = "arm"
+ARM_INSTRUCTION_SET:armv4 = "arm"
+ARM_INSTRUCTION_SET:armv5 = "arm"
DEPENDS = "libtool swig-native bzip2 zlib glib-2.0 libwebp"
@@ -59,7 +59,7 @@ SRC_URI = "git://github.com/opencv/opencv.git;name=opencv \
file://0001-Make-ts-module-external.patch \
file://0001-sfm-link-with-Glog_LIBS.patch;patchdir=../contrib \
"
-SRC_URI_append_riscv64 = " file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
+SRC_URI:append:riscv64 = " file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
S = "${WORKDIR}/git"
@@ -106,7 +106,7 @@ EXTRA_OECMAKE = "-DOPENCV_EXTRA_MODULES_PATH=${WORKDIR}/contrib/modules \
${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.1", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -DENABLE_SSE41=1", "", d)} \
${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.2", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -DENABLE_SSE41=1 -DENABLE_SSE42=1", "", d)} \
"
-EXTRA_OECMAKE_append_x86 = " -DX86=ON"
+EXTRA_OECMAKE:append:x86 = " -DX86=ON"
PACKAGECONFIG ??= "gapi python3 eigen jpeg png tiff v4l libv4l gstreamer samples tbb gphoto2 \
${@bb.utils.contains("DISTRO_FEATURES", "x11", "gtk", "", d)} \
@@ -158,7 +158,7 @@ PACKAGES += "${@bb.utils.contains('PACKAGECONFIG', 'samples', '${PN}-samples', '
${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-${BPN}', '', d)} \
${PN}-apps"
-python populate_packages_prepend () {
+python populate_packages:prepend () {
cv_libdir = d.expand('${libdir}')
do_split_packages(d, cv_libdir, '^lib(.*)\.so$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev', allow_links=True)
do_split_packages(d, cv_libdir, '^lib(.*)\.la$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev')
@@ -211,14 +211,14 @@ RDEPENDS_python3-opencv = "python3-core python3-numpy"
RDEPENDS_${PN}-apps = "bash"
-do_compile_prepend() {
+do_compile:prepend() {
# remove the build host info to improve reproducibility
if [ -f ${WORKDIR}/build/modules/core/version_string.inc ]; then
sed -i "s#${WORKDIR}#/workdir#g" ${WORKDIR}/build/modules/core/version_string.inc
fi
}
-do_install_append() {
+do_install:append() {
# Move Python files into correct library folder (for multilib build)
if [ "$libdir" != "/usr/lib" -a -d ${D}/usr/lib ]; then
mv ${D}/usr/lib/* ${D}/${libdir}/
@@ -245,7 +245,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
SRCREV_opencv = "5423d53ae0d116ee5bbe52f8b5503f0cd8586998"
OPENCV_SRC ?= "git://source.codeaurora.org/external/imx/opencv-imx.git;protocol=https"
SRCBRANCH = "4.5.2_imx"
-SRC_URI_remove = "git://github.com/opencv/opencv.git;name=opencv"
+SRC_URI:remove = "git://github.com/opencv/opencv.git;name=opencv"
SRC_URI =+ "${OPENCV_SRC};branch=${SRCBRANCH};name=opencv"
# Add opencv_extra
@@ -254,7 +254,7 @@ SRC_URI += " \
git://github.com/opencv/opencv_extra.git;destsuffix=extra;name=extra \
file://0001-Add-smaller-version-of-download_models.py.patch;patchdir=../extra \
"
-SRCREV_FORMAT_append = "_extra"
+SRCREV_FORMAT:append = "_extra"
# Add tiny-dnn
SRC_URI[tinydnn.md5sum] = "adb1c512e09ca2c7a6faef36f9c53e59"
@@ -264,25 +264,25 @@ SRC_URI += " \
file://OpenCV_DNN_examples.patch \
"
-PACKAGECONFIG_remove = "eigen"
-PACKAGECONFIG_append_mx8 = " dnn text"
+PACKAGECONFIG:remove = "eigen"
+PACKAGECONFIG:append:mx8 = " dnn text"
PACKAGECONFIG_OPENCL = ""
-PACKAGECONFIG_OPENCL_mx8 = "opencl"
-PACKAGECONFIG_OPENCL_mx8dxl = ""
-PACKAGECONFIG_OPENCL_mx8mm = ""
-PACKAGECONFIG_OPENCL_mx8mnlite = ""
-PACKAGECONFIG_append = " ${PACKAGECONFIG_OPENCL}"
+PACKAGECONFIG_OPENCL:mx8 = "opencl"
+PACKAGECONFIG_OPENCL:mx8dxl = ""
+PACKAGECONFIG_OPENCL:mx8mm = ""
+PACKAGECONFIG_OPENCL:mx8mnlite = ""
+PACKAGECONFIG:append = " ${PACKAGECONFIG_OPENCL}"
PACKAGECONFIG[openvx] = "-DWITH_OPENVX=ON -DOPENVX_ROOT=${STAGING_LIBDIR} -DOPENVX_LIB_CANDIDATES='OpenVX;OpenVXU',-DWITH_OPENVX=OFF,virtual/libopenvx,"
PACKAGECONFIG[qt5] = "-DWITH_QT=ON -DOE_QMAKE_PATH_EXTERNAL_HOST_BINS=${STAGING_BINDIR_NATIVE} -DCMAKE_PREFIX_PATH=${STAGING_BINDIR_NATIVE}/cmake,-DWITH_QT=OFF,qtbase qtbase-native,"
PACKAGECONFIG[tests-imx] = "-DINSTALL_TESTS=ON -DOPENCV_TEST_DATA_PATH=${S}/../extra/testdata, -DINSTALL_TESTS=OFF,"
-do_unpack_extra_append() {
+do_unpack_extra:append() {
mkdir -p ${S}/3rdparty/tinydnn/
tar xzf ${WORKDIR}/v1.0.0a3.tar.gz -C ${S}/3rdparty/tinydnn/
}
-do_install_append() {
+do_install:append() {
ln -sf opencv4/opencv2 ${D}${includedir}/opencv2
install -d ${D}${datadir}/OpenCV/samples/data
cp -r ${S}/samples/data/* ${D}${datadir}/OpenCV/samples/data
--
2.31.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [meta-freescale] [PATCH] meta-freescale: convert to new override syntax in honister
2021-08-07 7:07 [PATCH] meta-freescale: convert to new override syntax in honister Thomas Perrot
@ 2021-08-07 11:33 ` Otavio Salvador
2021-08-10 16:03 ` Thomas Perrot
0 siblings, 1 reply; 4+ messages in thread
From: Otavio Salvador @ 2021-08-07 11:33 UTC (permalink / raw)
To: Thomas Perrot; +Cc: meta-freescale
Hello,
We have an onging PR for it; please try it out.
Em sáb., 7 de ago. de 2021 às 04:09, Thomas Perrot
<thomas.perrot@bootlin.com> escreveu:
>
> Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
> ---
> classes/fsl-eula-unpack.bbclass | 4 +-
> classes/fsl-u-boot-localversion.bbclass | 2 +-
> .../fsl-vivante-kernel-driver-handler.bbclass | 2 +-
> classes/image_types_fsl.bbclass | 2 +-
> classes/imx-boot-container.bbclass | 4 +-
> classes/kernel-imximage.bbclass | 4 +-
> classes/kernel-itbimage.bbclass | 2 +-
> classes/mfgtool-initramfs-image.bbclass | 2 +-
> classes/qoriq_build_64bit_kernel.bbclass | 4 +-
> classes/use-imx-headers.bbclass | 6 +-
> ...e-imx-security-controller-firmware.bbclass | 6 +-
> conf/layer.conf | 2 +-
> conf/machine/imx6qdlsabreauto.conf | 18 +-
> conf/machine/imx6qdlsabresd.conf | 18 +-
> conf/machine/imx6slevk.conf | 2 +-
> conf/machine/imx6sllevk.conf | 2 +-
> conf/machine/imx6sxsabreauto.conf | 4 +-
> conf/machine/imx6sxsabresd.conf | 4 +-
> conf/machine/imx6ulevk.conf | 12 +-
> conf/machine/imx6ullevk.conf | 2 +-
> conf/machine/imx6ulz-14x14-evk.conf | 2 +-
> conf/machine/imx7dsabresd.conf | 2 +-
> conf/machine/imx7ulpevk.conf | 4 +-
> conf/machine/imx8dxl-lpddr4-evk.conf | 2 +-
> conf/machine/imx8mm-ddr4-evk.conf | 2 +-
> conf/machine/imx8mm-lpddr4-evk.conf | 2 +-
> conf/machine/imx8mn-ddr4-evk.conf | 2 +-
> conf/machine/imx8mn-lpddr4-evk.conf | 2 +-
> conf/machine/imx8mp-ddr4-evk.conf | 2 +-
> conf/machine/imx8mp-lpddr4-evk.conf | 2 +-
> conf/machine/imx8mq-evk.conf | 12 +-
> conf/machine/imx8qm-mek.conf | 8 +-
> conf/machine/imx8qxp-mek.conf | 2 +-
> conf/machine/include/imx-base.inc | 360 +++++++++---------
> conf/machine/include/imx8dxl-evk.inc | 4 +-
> conf/machine/include/imx8mm-evk.inc | 26 +-
> conf/machine/include/imx8mn-evk.inc | 26 +-
> conf/machine/include/imx8mp-evk.inc | 24 +-
> conf/machine/include/imx8x-mek.inc | 6 +-
> conf/machine/include/qoriq-base.inc | 8 +-
> conf/machine/include/utilities.inc | 2 +-
> conf/machine/ls1028ardb.conf | 2 +-
> conf/machine/ls1043ardb.conf | 2 +-
> conf/machine/ls1046afrwy.conf | 2 +-
> conf/machine/ls1046ardb.conf | 2 +-
> .../wayland/weston-init.bbappend | 2 +-
> .../recipes-browser/chromium/chromium-imx.inc | 4 +-
> .../clutter/clutter-1.0_%.bbappend | 2 +-
> .../recipes-graphics/cogl/cogl-1.0_%.bbappend | 2 +-
> .../wayland/weston-init.bbappend | 2 +-
> .../glmark2/glmark2_%.bbappend | 8 +-
> .../recipes-devtools/luajit/luajit_%.bbappend | 4 +-
> .../recipes-dpaa/fmc/fmc_git.bb | 18 +-
> .../xserver-common/xserver-common_%.bbappend | 6 +-
> .../recipes-qt4/qt4/qt4-imx-support.inc | 12 +-
> .../recipes-qt/qt5/qtbase_%.bbappend | 26 +-
> .../recipes-qt/qt5/qtwayland_%.bbappend | 8 +-
> .../libvirt/libvirt_%.bbappend | 6 +-
> recipes-bsp/alsa-state/alsa-state.bbappend | 16 +-
> recipes-bsp/atf/qoriq-atf_1.5.bb | 18 +-
> recipes-bsp/atf/qoriq-atf_2.3.bb | 2 +-
> .../firmware-imx/firmware-imx-8_8.12.bb | 4 +-
> recipes-bsp/firmware-imx/firmware-imx_8.12.bb | 2 +-
> recipes-bsp/firmware-qca/qca-tools_3.0.2.bb | 4 +-
> recipes-bsp/formfactor/formfactor_%.bbappend | 2 +-
> recipes-bsp/imx-atf/imx-atf_2.4.bb | 2 +-
> recipes-bsp/imx-lib/imx-lib_git.bb | 18 +-
> recipes-bsp/imx-mkimage/imx-boot_1.0.bb | 32 +-
> recipes-bsp/imx-mkimage/imx-mkimage_git.bb | 6 +-
> .../imx-sc-firmware/imx-sc-firmware_1.9.0.bb | 8 +-
> recipes-bsp/imx-test/imx-test_git.bb | 28 +-
> .../imx-vpu-hantro-daemon_1.0.0.bb | 8 +-
> .../imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb | 6 +-
> recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb | 2 +-
> .../libimxdmabuffer/libimxdmabuffer_1.0.1.bb | 14 +-
> recipes-bsp/mc-utils/mc-utils_git.bb | 10 +-
> recipes-bsp/rcw/rcw_git.bb | 6 +-
> recipes-bsp/u-boot/libubootenv_%.bbappend | 4 +-
> .../u-boot/u-boot-fslc-mfgtool_2021.07.bb | 2 +-
> recipes-bsp/u-boot/u-boot-fslc_2021.07.bb | 4 +-
> .../u-boot/u-boot-imx-mfgtool_2021.04.bb | 2 +-
> recipes-bsp/u-boot/u-boot-imx_2021.04.bb | 2 +-
> recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb | 18 +-
> .../iproute2/iproute2_%.bbappend | 2 +-
> .../openssl/openssl_%.bbappend | 6 +-
> .../init-ifupdown/init-ifupdown_%.bbappend | 2 +-
> recipes-core/udev/udev-rules-qoriq.bb | 6 +-
> recipes-devtools/qemu/qemu-qoriq_4.1.0.bb | 8 +-
> recipes-devtools/qemu/qemu.inc | 12 +-
> recipes-dpaa/fm-ucode/fm-ucode_git.bb | 14 +-
> recipes-dpaa2/aiopsl/aiopsl_git.bb | 4 +-
> .../management-complex_10.14.1.bb | 8 +-
> .../management-complex_10.20.4.bb | 8 +-
> .../management-complex_10.24.0.bb | 10 +-
> recipes-extended/dpdk/dpdk.inc | 18 +-
> recipes-extended/dpdk/dpdk_19.11-20.12.bb | 2 +-
> recipes-extended/jailhouse/jailhouse_0.12.bb | 6 +-
> recipes-extended/odp/odp-counters_git.bb | 2 +-
> recipes-extended/odp/odp-module_git.bb | 2 +-
> recipes-extended/odp/odp.inc | 2 +-
> recipes-extended/odp/odp_git.bb | 18 +-
> recipes-extended/procps/procps_%.bbappend | 2 +-
> recipes-extended/testfloat/testfloat_2a.bb | 2 +-
> recipes-extended/tsntool/tsntool_git.bb | 2 +-
> .../packagegroups/packagegroup-fsl-isp.bb | 2 +-
> .../packagegroups/packagegroup-fsl-qca6174.bb | 2 +-
> .../packagegroups/packagegroup-fsl-qca9377.bb | 2 +-
> recipes-graphics/cairo/cairo_%.bbappend | 4 +-
> recipes-graphics/drm/libdrm_2.4.102.imx.bb | 6 +-
> recipes-graphics/gtk+/gtk+3_%.bbappend | 4 +-
> .../images/core-image-weston.bbappend | 2 +-
> .../imx-gpu-apitrace_9.0.0.bb | 8 +-
> .../imx-gpu-viv/imx-gpu-viv-6.inc | 44 +--
> .../libepoxy/libepoxy_1.5.%.bbappend | 2 +-
> recipes-graphics/libsdl2/libsdl2_%.bbappend | 4 +-
> recipes-graphics/mesa/mesa-demos_%.bbappend | 16 +-
> recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb | 2 +-
> recipes-graphics/mesa/mesa-gl_%.bbappend | 2 +-
> recipes-graphics/mesa/mesa_%.bbappend | 22 +-
> .../vulkan/vulkan-loader_%.bbappend | 2 +-
> recipes-graphics/waffle/waffle_%.bbappend | 10 +-
> recipes-graphics/wayland/weston-init.bbappend | 26 +-
> recipes-graphics/wayland/weston_9.0.0.imx.bb | 26 +-
> .../pointercal-xinput_%.bbappend | 2 +-
> .../xf86-video-imx-vivante_6.4.0.p0.0.bb | 2 +-
> .../xserver-xf86-config_%.bbappend | 2 +-
> .../xorg-xserver/xserver-xorg_%.bbappend | 14 +-
> recipes-graphics/xwayland/xwayland_%.bbappend | 6 +-
> recipes-kernel/ceetm/ceetm_git.bb | 2 +-
> .../kernel-modules/kernel-module-ar_git.bb | 2 +-
> .../kernel-modules/kernel-module-ipc.inc | 2 +-
> .../kernel-module-qcacld-lea.inc | 2 +-
> .../linux/linux-fslc-lts-mfgtool_5.10.bb | 2 +-
> .../linux/linux-fslc-mfgtool_5.12.bb | 2 +-
> .../linux/linux-imx-headers_5.10.bb | 2 +-
> .../linux/linux-imx-mfgtool_5.10.bb | 2 +-
> recipes-kernel/linux/linux-qoriq.inc | 16 +-
> recipes-multimedia/alsa/alsa-lib_%.bbappend | 6 +-
> .../gstreamer/gstreamer1.0-libav_1.16.0.bb | 8 +-
> .../gstreamer1.0-plugins-bad_1.16.3.imx.bb | 16 +-
> .../gstreamer1.0-plugins-base_1.16.%.bbappend | 6 +-
> .../gstreamer1.0-plugins-base_1.16.2.imx.bb | 2 +-
> .../gstreamer1.0-plugins-good_1.16.%.bbappend | 6 +-
> .../gstreamer1.0-plugins-imx_2.0.0.bb | 16 +-
> .../gstreamer/imx-gst1.0-plugin_4.5.7.bb | 24 +-
> .../imx-codec/imx-codec_4.5.7.bb | 6 +-
> .../imx-vpuwrap/imx-vpuwrap_4.5.7.bb | 4 +-
> .../libimxvpuapi/libimxvpuapi2_2.2.0.bb | 8 +-
> .../pulseaudio/pulseaudio_%.bbappend | 18 +-
> .../optee-imx/optee-client_3.10.0.imx.bb | 4 +-
> .../optee-imx/optee-os_3.10.0.imx.bb | 30 +-
> .../optee-imx/optee-test_3.10.0.imx.bb | 6 +-
> .../optee/optee-os-qoriq_3.8.0.bb | 12 +-
> .../0001-Use-Os-to-compile-tinyxml2.cpp.patch | 6 +-
> recipes-support/opencv/opencv_4.5.2.imx.bb | 36 +-
> 155 files changed, 762 insertions(+), 762 deletions(-)
>
> diff --git a/classes/fsl-eula-unpack.bbclass b/classes/fsl-eula-unpack.bbclass
> index 498d7826d9cf..5690898c5a43 100644
> --- a/classes/fsl-eula-unpack.bbclass
> +++ b/classes/fsl-eula-unpack.bbclass
> @@ -79,11 +79,11 @@ FSL_EULA_FILE_MD5SUM ?= \
>
> LIC_FILES_CHKSUM_LAYER ?= "file://${FSL_EULA_FILE};md5=${FSL_EULA_FILE_MD5SUM}"
> LIC_FILES_CHKSUM_LAYER[vardepsexclude] += "FSL_EULA_FILE"
> -LIC_FILES_CHKSUM_append = " ${LIC_FILES_CHKSUM_LAYER}"
> +LIC_FILES_CHKSUM:append = " ${LIC_FILES_CHKSUM_LAYER}"
>
> LIC_FILES_CHKSUM[vardepsexclude] += "FSL_EULA_FILE"
>
> -do_fetch_prepend() {
> +do_fetch:prepend() {
> if "Proprietary" not in d.getVar("LICENSE"):
> bb.fatal("The recipe LICENSE should include Proprietary but is " + d.getVar("LICENSE") + ".")
> }
> diff --git a/classes/fsl-u-boot-localversion.bbclass b/classes/fsl-u-boot-localversion.bbclass
> index 617aae1de215..ebde8ea718f2 100644
> --- a/classes/fsl-u-boot-localversion.bbclass
> +++ b/classes/fsl-u-boot-localversion.bbclass
> @@ -14,7 +14,7 @@ LOCALVERSION ??= "+fslc"
>
> UBOOT_LOCALVERSION = "${LOCALVERSION}"
>
> -do_compile_prepend() {
> +do_compile:prepend() {
> if [ "${SCMVERSION}" = "y" ]; then
> # Add GIT revision to the local version
> head=`cd ${S} ; git rev-parse --verify --short HEAD 2> /dev/null`
> diff --git a/classes/fsl-vivante-kernel-driver-handler.bbclass b/classes/fsl-vivante-kernel-driver-handler.bbclass
> index 8ac8a33445d2..7ba597f1963e 100644
> --- a/classes/fsl-vivante-kernel-driver-handler.bbclass
> +++ b/classes/fsl-vivante-kernel-driver-handler.bbclass
> @@ -49,7 +49,7 @@ python fsl_vivante_kernel_driver_handler () {
> addhandler fsl_vivante_kernel_driver_handler
> fsl_vivante_kernel_driver_handler[eventmask] = "bb.event.RecipePreFinalise"
>
> -do_configure_append () {
> +do_configure:append () {
> if [ "${MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT}" = "1" ]; then
> config="${B}/.config"
>
> diff --git a/classes/image_types_fsl.bbclass b/classes/image_types_fsl.bbclass
> index c49c51b7a348..d6d8da95fd3b 100644
> --- a/classes/image_types_fsl.bbclass
> +++ b/classes/image_types_fsl.bbclass
> @@ -37,7 +37,7 @@ do_image_wic[depends] += " \
> "
>
> # We need to apply a fixup inside of the partition table
> -IMAGE_CMD_wic_append_mxs() {
> +IMAGE_CMD_wic:append:mxs() {
> # Change partition type for mxs processor family
> bbnote "Setting partition type to 0x53 as required for mxs' SoC family."
> echo -n S | dd of=$out${IMAGE_NAME_SUFFIX}.wic bs=1 count=1 seek=450 conv=notrunc
> diff --git a/classes/imx-boot-container.bbclass b/classes/imx-boot-container.bbclass
> index 41fe9cca739a..33de45c52b28 100644
> --- a/classes/imx-boot-container.bbclass
> +++ b/classes/imx-boot-container.bbclass
> @@ -23,7 +23,7 @@
>
> # Define ATF binary file to be deployed to the U-Boot build folder
> ATF_MACHINE_NAME = "bl31-${ATF_PLATFORM}.bin"
> -ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
> +ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
>
> # This package aggregates output deployed by other packages, so set the
> # appropriate dependencies for populate binaries task
> @@ -76,7 +76,7 @@ addtask do_resolve_and_populate_binaries before do_compile after do_configure
> # This effectively would allow the usage of the same WKS file for those
> # derivatives that are using the boot container from U-Boot and those
> # that are not yet have support for it enabled.
> -do_deploy_append() {
> +do_deploy:append() {
> # Deploy the resulted flash.bin for WIC to pick it up
> if [ -n "${UBOOT_CONFIG}" ]; then
> for config in ${UBOOT_MACHINE}; do
> diff --git a/classes/kernel-imximage.bbclass b/classes/kernel-imximage.bbclass
> index 234cc00d3059..ccf7ec53bf45 100644
> --- a/classes/kernel-imximage.bbclass
> +++ b/classes/kernel-imximage.bbclass
> @@ -17,7 +17,7 @@
> #
> # Copyright 2017 (C) O.S. Systems Software LTDA.
>
> -DEPENDS_append = ' u-boot-mkimage-native'
> +DEPENDS:append = ' u-boot-mkimage-native'
>
> IMXIMAGE_ENTRYPOINT ?= "${UBOOT_ENTRYPOINT}"
>
> @@ -55,6 +55,6 @@ gen_imximage() {
> done
> }
>
> -do_deploy_append() {
> +do_deploy:append() {
> gen_imximage
> }
> diff --git a/classes/kernel-itbimage.bbclass b/classes/kernel-itbimage.bbclass
> index 84262879c09b..51a87319ce94 100644
> --- a/classes/kernel-itbimage.bbclass
> +++ b/classes/kernel-itbimage.bbclass
> @@ -459,7 +459,7 @@ addtask assemble_fitimage_initramfs before do_deploy after do_install
>
>
> kernel_do_deploy[vardepsexclude] = "DATETIME"
> -kernel_do_deploy_append() {
> +kernel_do_deploy:append() {
> # Update deploy directory
> if echo ${KERNEL_IMAGETYPES} | grep -wq "itbImage"; then
> cd ${B}
> diff --git a/classes/mfgtool-initramfs-image.bbclass b/classes/mfgtool-initramfs-image.bbclass
> index 65028b8faa88..1d4c55131d67 100644
> --- a/classes/mfgtool-initramfs-image.bbclass
> +++ b/classes/mfgtool-initramfs-image.bbclass
> @@ -13,7 +13,7 @@ FEATURE_PACKAGES_extfs = "packagegroup-fsl-mfgtool-extfs"
> FEATURE_PACKAGES_f2fs = "packagegroup-fsl-mfgtool-f2fs"
>
> IMAGE_FSTYPES = "cpio.gz.u-boot"
> -IMAGE_FSTYPES_mxs = "cpio.gz.u-boot"
> +IMAGE_FSTYPES:mxs = "cpio.gz.u-boot"
> IMAGE_ROOTFS_SIZE ?= "8192"
>
> # Filesystems enabled by default
> diff --git a/classes/qoriq_build_64bit_kernel.bbclass b/classes/qoriq_build_64bit_kernel.bbclass
> index 93b4d412ff3c..7014be91cc1f 100644
> --- a/classes/qoriq_build_64bit_kernel.bbclass
> +++ b/classes/qoriq_build_64bit_kernel.bbclass
> @@ -6,8 +6,8 @@ python () {
> if promote_kernel == "1":
> sys_multilib = 'powerpc64' + d.getVar('TARGET_VENDOR', False) + 'mllib64-' + d.getVar('HOST_OS', False)
> tc_options = d.getVar('TOOLCHAIN_OPTIONS', False) + '/../lib64-' + d.getVar("MACHINE", False)
> - d.setVar('DEPENDS_append', ' lib64-gcc-cross-powerpc64 lib64-libgcc')
> - d.setVar('PATH_append', ':' + d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
> + d.setVar('DEPENDS:append', ' lib64-gcc-cross-powerpc64 lib64-libgcc')
> + d.setVar('PATH:append', ':' + d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
> d.setVar('KERNEL_CC', d.getVar('CCACHE', False) + sys_multilib + '-' + 'gcc' + d.getVar('HOST_CC_KERNEL_ARCH', False) + tc_options)
> d.setVar('KERNEL_LD', d.getVar('CCACHE', False) + sys_multilib + '-' + 'ld.bfd' + d.getVar('HOST_LD_KERNEL_ARCH', False) + tc_options)
> d.setVar('KERNEL_AR', d.getVar('CCACHE', False) + sys_multilib + '-' + 'ar' + d.getVar('HOST_AR_KERNEL_ARCH', False))
> diff --git a/classes/use-imx-headers.bbclass b/classes/use-imx-headers.bbclass
> index fcec68c8b3e0..b03d37413504 100644
> --- a/classes/use-imx-headers.bbclass
> +++ b/classes/use-imx-headers.bbclass
> @@ -13,14 +13,14 @@
> #
> # Copyright 2018 (C) O.S. Systems Software LTDA.
>
> -DEPENDS_append_imx = " linux-imx-headers"
> +DEPENDS:append:imx = " linux-imx-headers"
>
> # Set runtime dependency of -dev for package inheriting this class to
> # linux-imx-headers-dev package. This is required in order to propagate
> # headers into the SDK
> RDEPENDS_${PN}-dev += "linux-imx-headers-dev"
>
> -PACKAGE_ARCH_imx ?= "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:imx ?= "${MACHINE_SOCARCH}"
>
> STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
>
> @@ -34,4 +34,4 @@ STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
> # Typical example here would be imx-vpu-hantro recipe, which requires NXP
> # BSP and is not compatible with mainline.
> COMPATIBLE_HOST = '(null)'
> -COMPATIBLE_HOST_use-nxp-bsp = '.*'
> +COMPATIBLE_HOST:use-nxp-bsp = '.*'
> diff --git a/classes/use-imx-security-controller-firmware.bbclass b/classes/use-imx-security-controller-firmware.bbclass
> index 7c79fc62bbd5..9650059b5066 100644
> --- a/classes/use-imx-security-controller-firmware.bbclass
> +++ b/classes/use-imx-security-controller-firmware.bbclass
> @@ -18,11 +18,11 @@
>
> SECO_FIRMWARE_NAME ?= ""
>
> -SECO_FIRMWARE_NAME_mx8qm = "mx8qmb0-ahab-container.img"
> -SECO_FIRMWARE_NAME_mx8qxp = \
> +SECO_FIRMWARE_NAME:mx8qm = "mx8qmb0-ahab-container.img"
> +SECO_FIRMWARE_NAME:mx8qxp = \
> "${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', 'mx8qxb0-ahab-container.img', \
> 'mx8qxc0-ahab-container.img', d)}"
> -SECO_FIRMWARE_NAME_mx8dxl = "mx8dxla1-ahab-container.img"
> +SECO_FIRMWARE_NAME:mx8dxl = "mx8dxla1-ahab-container.img"
>
> python () {
> if "mx8m" in d.getVar('MACHINEOVERRIDES').split(":"):
> diff --git a/conf/layer.conf b/conf/layer.conf
> index e07b65ab77f4..4487de9cc445 100644
> --- a/conf/layer.conf
> +++ b/conf/layer.conf
> @@ -8,7 +8,7 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
> BBFILE_COLLECTIONS += "freescale-layer"
> BBFILE_PATTERN_freescale-layer := "^${LAYERDIR}/"
> BBFILE_PRIORITY_freescale-layer = "5"
> -LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott"
> +LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott honister"
>
> # Add the Freescale-specific licenses into the metadata
> LICENSE_PATH += "${LAYERDIR}/custom-licenses"
> diff --git a/conf/machine/imx6qdlsabreauto.conf b/conf/machine/imx6qdlsabreauto.conf
> index b7aec8c257ee..0b5274cb8149 100644
> --- a/conf/machine/imx6qdlsabreauto.conf
> +++ b/conf/machine/imx6qdlsabreauto.conf
> @@ -26,7 +26,7 @@ KERNEL_DEVICETREE = " \
> imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb imx6dl-sabreauto-ecspi.dtb \
> imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb \
> "
> -KERNEL_DEVICETREE_use-mainline-bsp = " \
> +KERNEL_DEVICETREE:use-mainline-bsp = " \
> imx6qp-sabreauto.dtb \
> imx6q-sabreauto.dtb \
> imx6dl-sabreauto.dtb \
> @@ -34,18 +34,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
>
> ### u-boot-fslc settings ###
>
> -SPL_BINARY_pn-u-boot-fslc = "SPL"
> -UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
> -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> +SPL_BINARY:pn-u-boot-fslc = "SPL"
> +UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
> +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
>
> ### u-boot-imx settings ###
>
> # The u-boot-imx does not provide unified functionality for DL/Q/QP SoC
> # variants. Change the defconfig to the targeted SoC variant.
> -SPL_BINARY_pn-u-boot-imx = ""
> -UBOOT_MACHINE_pn-u-boot-imx = "mx6qsabreauto_defconfig"
> -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> +SPL_BINARY:pn-u-boot-imx = ""
> +UBOOT_MACHINE:pn-u-boot-imx = "mx6qsabreauto_defconfig"
> +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
>
> WKS_FILE = " \
> ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> @@ -54,6 +54,6 @@ WKS_FILE = " \
>
> SERIAL_CONSOLES = "115200;ttymxc3"
>
> -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
>
> MACHINE_FEATURES += " pci wifi bluetooth"
> diff --git a/conf/machine/imx6qdlsabresd.conf b/conf/machine/imx6qdlsabresd.conf
> index b3d09e9397cb..27a2e9d7fa7f 100644
> --- a/conf/machine/imx6qdlsabresd.conf
> +++ b/conf/machine/imx6qdlsabresd.conf
> @@ -35,7 +35,7 @@ KERNEL_DEVICETREE = " \
> imx6dl-sabresd-hdcp.dtb \
> imx6dl-sabresd-ldo.dtb \
> "
> -KERNEL_DEVICETREE_use-mainline-bsp = " \
> +KERNEL_DEVICETREE:use-mainline-bsp = " \
> imx6qp-sabresd.dtb \
> imx6q-sabresd.dtb \
> imx6dl-sabresd.dtb \
> @@ -43,18 +43,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
>
> ### u-boot-fslc settings ###
>
> -SPL_BINARY_pn-u-boot-fslc = "SPL"
> -UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> +SPL_BINARY:pn-u-boot-fslc = "SPL"
> +UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
>
> ### u-boot-imx settings ###
>
> # The u-boot-imx does not provide unified functionality for DL/Q/QP SoC
> # variants. Change the defconfig to the targeted SoC variant.
> -SPL_BINARY_pn-u-boot-imx = ""
> -UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> +SPL_BINARY:pn-u-boot-imx = ""
> +UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
>
> WKS_FILE = " \
> ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> @@ -63,6 +63,6 @@ WKS_FILE = " \
>
> SERIAL_CONSOLES = "115200;ttymxc0"
>
> -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
>
> MACHINE_FEATURES += " pci wifi bluetooth"
> diff --git a/conf/machine/imx6slevk.conf b/conf/machine/imx6slevk.conf
> index 1e8c403b7cde..8bef21b680b4 100644
> --- a/conf/machine/imx6slevk.conf
> +++ b/conf/machine/imx6slevk.conf
> @@ -10,7 +10,7 @@ include conf/machine/include/imx-base.inc
> include conf/machine/include/tune-cortexa9.inc
>
> KERNEL_DEVICETREE = "imx6sl-evk.dtb"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> imx6sl-evk-btwifi.dtb \
> imx6sl-evk-csi.dtb \
> imx6sl-evk-ldo.dtb \
> diff --git a/conf/machine/imx6sllevk.conf b/conf/machine/imx6sllevk.conf
> index 30b537f18666..6282533aa4f1 100644
> --- a/conf/machine/imx6sllevk.conf
> +++ b/conf/machine/imx6sllevk.conf
> @@ -23,7 +23,7 @@ UBOOT_CONFIG[sd-optee] = "mx6sllevk_optee_config,sdcard"
> UBOOT_CONFIG[epdc] = "mx6sllevk_epdc_config"
> UBOOT_CONFIG[mfgtool] = "mx6sllevk_config"
>
> -OPTEE_BIN_EXT_imx6sllevk = "6sllevk"
> +OPTEE_BIN_EXT:imx6sllevk = "6sllevk"
>
> SERIAL_CONSOLES = "115200;ttymxc0"
>
> diff --git a/conf/machine/imx6sxsabreauto.conf b/conf/machine/imx6sxsabreauto.conf
> index f7031ccb1134..2354635e2b33 100644
> --- a/conf/machine/imx6sxsabreauto.conf
> +++ b/conf/machine/imx6sxsabreauto.conf
> @@ -10,7 +10,7 @@ require conf/machine/include/imx-base.inc
> require conf/machine/include/tune-cortexa9.inc
>
> KERNEL_DEVICETREE = "imx6sx-sabreauto.dtb"
> -KERNEL_DEVICETREE_use-mainline-bsp = "imx6sx-sabreauto.dtb"
> +KERNEL_DEVICETREE:use-mainline-bsp = "imx6sx-sabreauto.dtb"
>
> UBOOT_MAKE_TARGET = "u-boot.imx"
> UBOOT_SUFFIX = "imx"
> @@ -29,6 +29,6 @@ OPTEE_BIN_EXT = "6sxauto"
>
> SERIAL_CONSOLES = "115200;ttymxc3"
>
> -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
>
> MACHINE_FEATURES += " pci wifi bluetooth"
> diff --git a/conf/machine/imx6sxsabresd.conf b/conf/machine/imx6sxsabresd.conf
> index ff7d6ae62d03..fcfcbd5f41c7 100644
> --- a/conf/machine/imx6sxsabresd.conf
> +++ b/conf/machine/imx6sxsabresd.conf
> @@ -14,7 +14,7 @@ KERNEL_DEVICETREE = " \
> imx6sx-sdb-reva.dtb \
> imx6sx-sdb-sai.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> imx6sx-sdb-btwifi.dtb \
> imx6sx-sdb-emmc.dtb \
> imx6sx-sdb-lcdif1.dtb \
> @@ -43,6 +43,6 @@ OPTEE_BIN_EXT = "6sxsdb"
>
> SERIAL_CONSOLES = "115200;ttymxc0"
>
> -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
>
> MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
> diff --git a/conf/machine/imx6ulevk.conf b/conf/machine/imx6ulevk.conf
> index f7c5d8ae52df..6fd14456fb29 100644
> --- a/conf/machine/imx6ulevk.conf
> +++ b/conf/machine/imx6ulevk.conf
> @@ -21,19 +21,19 @@ KERNEL_DEVICETREE = " \
> imx6ul-14x14-evk-emmc.dtb \
> imx6ul-14x14-evk-gpmi-weim.dtb \
> "
> -KERNEL_DEVICETREE_use-mainline-bsp = "imx6ul-14x14-evk.dtb"
> +KERNEL_DEVICETREE:use-mainline-bsp = "imx6ul-14x14-evk.dtb"
>
> ### u-boot-fslc settings ###
>
> -SPL_BINARY_pn-u-boot-fslc = "SPL"
> -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> +SPL_BINARY:pn-u-boot-fslc = "SPL"
> +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
>
> ### u-boot-imx settings ###
>
> # The u-boot-imx does not provide SPL support
> -SPL_BINARY_pn-u-boot-imx = ""
> -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> +SPL_BINARY:pn-u-boot-imx = ""
> +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
>
> WKS_FILE = " \
> ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> diff --git a/conf/machine/imx6ullevk.conf b/conf/machine/imx6ullevk.conf
> index bd592a20bf43..f5b7309fbe6b 100644
> --- a/conf/machine/imx6ullevk.conf
> +++ b/conf/machine/imx6ullevk.conf
> @@ -15,7 +15,7 @@ KERNEL_DEVICETREE = " \
> imx6ull-14x14-evk.dtb \
> "
>
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> imx6ull-14x14-evk-btwifi.dtb \
> imx6ull-14x14-evk-btwifi-oob.dtb \
> imx6ull-14x14-evk-emmc.dtb \
> diff --git a/conf/machine/imx6ulz-14x14-evk.conf b/conf/machine/imx6ulz-14x14-evk.conf
> index 7b794e7ccb13..a27f1ef11277 100644
> --- a/conf/machine/imx6ulz-14x14-evk.conf
> +++ b/conf/machine/imx6ulz-14x14-evk.conf
> @@ -14,7 +14,7 @@ MACHINE_FEATURES += "wifi bluetooth bcm4339 bcm43455"
> KERNEL_DEVICETREE = " \
> imx6ulz-14x14-evk.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> imx6ulz-14x14-evk-btwifi.dtb \
> imx6ulz-14x14-evk-emmc.dtb \
> imx6ulz-14x14-evk-gpmi-weim.dtb \
> diff --git a/conf/machine/imx7dsabresd.conf b/conf/machine/imx7dsabresd.conf
> index e848f294395f..860c8007f711 100644
> --- a/conf/machine/imx7dsabresd.conf
> +++ b/conf/machine/imx7dsabresd.conf
> @@ -12,7 +12,7 @@ require conf/machine/include/tune-cortexa7.inc
> MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
>
> KERNEL_DEVICETREE = "imx7d-sdb.dtb"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> imx7d-sdb-epdc.dtb \
> imx7d-sdb-gpmi-weim.dtb \
> imx7d-sdb-m4.dtb \
> diff --git a/conf/machine/imx7ulpevk.conf b/conf/machine/imx7ulpevk.conf
> index a587f44b388c..d685a90caca2 100644
> --- a/conf/machine/imx7ulpevk.conf
> +++ b/conf/machine/imx7ulpevk.conf
> @@ -14,10 +14,10 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43430"
> KERNEL_DEVICETREE = " \
> imx7ulp-evk.dtb \
> "
> -KERNEL_DEVICETREE_append_use-mainline-bsp = " \
> +KERNEL_DEVICETREE:append:use-mainline-bsp = " \
> imx7ulp-com.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> imx7ulp-evk-ft5416.dtb \
> imx7ulp-evk-mipi.dtb \
> imx7ulp-evkb.dtb \
> diff --git a/conf/machine/imx8dxl-lpddr4-evk.conf b/conf/machine/imx8dxl-lpddr4-evk.conf
> index 1ea5260bb2c9..d44a4732128a 100644
> --- a/conf/machine/imx8dxl-lpddr4-evk.conf
> +++ b/conf/machine/imx8dxl-lpddr4-evk.conf
> @@ -5,7 +5,7 @@
>
> require conf/machine/include/imx8dxl-evk.inc
> KERNEL_DEVICETREE_BASENAME = "imx8dxl-evk"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-enet0.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-enet0-tja1100.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
> diff --git a/conf/machine/imx8mm-ddr4-evk.conf b/conf/machine/imx8mm-ddr4-evk.conf
> index 3901bb92c3a0..f21cc38148b9 100644
> --- a/conf/machine/imx8mm-ddr4-evk.conf
> +++ b/conf/machine/imx8mm-ddr4-evk.conf
> @@ -7,7 +7,7 @@
> require include/imx8mm-evk.inc
>
> KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-revb-rm67191.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-revb.dtb \
> "
> diff --git a/conf/machine/imx8mm-lpddr4-evk.conf b/conf/machine/imx8mm-lpddr4-evk.conf
> index 6007c5404fc1..0a85ed20ac81 100644
> --- a/conf/machine/imx8mm-lpddr4-evk.conf
> +++ b/conf/machine/imx8mm-lpddr4-evk.conf
> @@ -8,7 +8,7 @@ require include/imx8mm-evk.inc
>
> # The device tree name is implicit for LPDDR4, so can't use MACHINE here
> KERNEL_DEVICETREE_BASENAME = "imx8mm-evk"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-swpdm.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-ak4497.dtb \
> diff --git a/conf/machine/imx8mn-ddr4-evk.conf b/conf/machine/imx8mn-ddr4-evk.conf
> index 442afdbd0547..d004d2aecb3b 100644
> --- a/conf/machine/imx8mn-ddr4-evk.conf
> +++ b/conf/machine/imx8mn-ddr4-evk.conf
> @@ -7,7 +7,7 @@
> require include/imx8mn-evk.inc
>
> KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-usd-wifi.dtb \
> "
> UBOOT_CONFIG_BASENAME = "imx8mn_ddr4_evk"
> diff --git a/conf/machine/imx8mn-lpddr4-evk.conf b/conf/machine/imx8mn-lpddr4-evk.conf
> index 7c58bc19f8a2..2e5e6be9aa21 100644
> --- a/conf/machine/imx8mn-lpddr4-evk.conf
> +++ b/conf/machine/imx8mn-lpddr4-evk.conf
> @@ -8,7 +8,7 @@ require include/imx8mn-evk.inc
>
> # The device tree name is implicit for LPDDR4, so can't use MACHINE here
> KERNEL_DEVICETREE_BASENAME = "imx8mn-evk"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
> "
> UBOOT_CONFIG_BASENAME = "imx8mn_evk"
> diff --git a/conf/machine/imx8mp-ddr4-evk.conf b/conf/machine/imx8mp-ddr4-evk.conf
> index 09517769f00b..78e0c1608152 100644
> --- a/conf/machine/imx8mp-ddr4-evk.conf
> +++ b/conf/machine/imx8mp-ddr4-evk.conf
> @@ -8,7 +8,7 @@ require include/imx8mp-evk.inc
>
> # FIXME: This machine is not yet supported by u-boot-fslc, so for now
> # use u-boot-imx for mainline.
> -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-imx"
> +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-imx"
>
> KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
>
> diff --git a/conf/machine/imx8mp-lpddr4-evk.conf b/conf/machine/imx8mp-lpddr4-evk.conf
> index cf926c08d0a1..76a1f44990fe 100644
> --- a/conf/machine/imx8mp-lpddr4-evk.conf
> +++ b/conf/machine/imx8mp-lpddr4-evk.conf
> @@ -11,7 +11,7 @@ KERNEL_DEVICETREE_BASENAME = "imx8mp-evk"
>
> # NXP kernel has additional DTB files for various board configuration and
> # derivates. Include them here for NXP BSP only
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/imx8mp-ab2.dtb \
> freescale/imx8mp-evk-basler.dtb \
> freescale/imx8mp-evk-basler-ov2775.dtb \
> diff --git a/conf/machine/imx8mq-evk.conf b/conf/machine/imx8mq-evk.conf
> index 9907ef4b26c2..b6dcd89026bb 100644
> --- a/conf/machine/imx8mq-evk.conf
> +++ b/conf/machine/imx8mq-evk.conf
> @@ -12,14 +12,14 @@ require conf/machine/include/tune-cortexa53.inc
> IMX_DEFAULT_BSP = "nxp"
>
> MACHINE_FEATURES += "pci wifi bluetooth optee bcm43455 bcm4356"
> -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
>
> -MACHINE_SOCARCH_FILTER_append_mx8mq = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d"
> +MACHINE_SOCARCH_FILTER:append:mx8mq = " virtual/libopenvg virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa virtual/libgl virtual/libg2d"
>
> KERNEL_DEVICETREE = " \
> freescale/imx8mq-evk.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/imx8mq-evk-ak4497.dtb \
> freescale/imx8mq-evk-audio-tdm.dtb \
> freescale/imx8mq-evk-dcss-adv7535.dtb \
> @@ -40,8 +40,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> freescale/imx8mq-evk-usdhc2-m2.dtb \
> "
>
> -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
>
> UBOOT_SUFFIX = "bin"
>
> @@ -77,7 +77,7 @@ IMX_BOOT_SEEK = "33"
> OPTEE_BIN_EXT = "8mq"
>
> # Add additional firmware
> -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
>
> # Use gstreamer 1.16 from meta-freescale
> PREFERRED_VERSION_gstreamer1.0 ?= "1.16.imx"
> diff --git a/conf/machine/imx8qm-mek.conf b/conf/machine/imx8qm-mek.conf
> index 5ceb6b8bb2f7..655c453f6262 100644
> --- a/conf/machine/imx8qm-mek.conf
> +++ b/conf/machine/imx8qm-mek.conf
> @@ -11,7 +11,7 @@ require conf/machine/include/tune-cortexa72-cortexa53.inc
> IMX_DEFAULT_BSP = "nxp"
>
> MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
> -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
>
> # Don't include kernels in standard images
> RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> @@ -55,8 +55,8 @@ UBOOT_MAKE_TARGET = \
> SPL_BINARY = \
> "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-spl.bin', \
> '', d)}"
> -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
>
> UBOOT_SUFFIX = "bin"
>
> @@ -86,4 +86,4 @@ IMX_BOOT_SOC_TARGET = "iMX8QM"
> BOARD_TYPE = "mek"
>
> # Add additional firmware
> -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> diff --git a/conf/machine/imx8qxp-mek.conf b/conf/machine/imx8qxp-mek.conf
> index 5b29138fc3fd..29412cc35bc9 100644
> --- a/conf/machine/imx8qxp-mek.conf
> +++ b/conf/machine/imx8qxp-mek.conf
> @@ -8,7 +8,7 @@ MACHINEOVERRIDES =. "mx8qxp:"
> require include/imx8x-mek.inc
>
> KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-a0.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-dom0.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-dpu-lcdif.dtb \
> diff --git a/conf/machine/include/imx-base.inc b/conf/machine/include/imx-base.inc
> index f92a08af1c00..78f815d1310d 100644
> --- a/conf/machine/include/imx-base.inc
> +++ b/conf/machine/include/imx-base.inc
> @@ -13,8 +13,8 @@ require conf/machine/include/utilities.inc
> IMX_DEFAULT_BSP ?= "mainline"
>
> # Those are SoC families we'd like to force the use of mainline BSP.
> -IMX_DEFAULT_BSP_mxs ?= "mainline"
> -IMX_DEFAULT_BSP_mx5 ?= "mainline"
> +IMX_DEFAULT_BSP:mxs ?= "mainline"
> +IMX_DEFAULT_BSP:mx5 ?= "mainline"
>
> MACHINEOVERRIDES =. "use-${IMX_DEFAULT_BSP}-bsp:"
>
> @@ -32,16 +32,16 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
> # ,----[ imx6qdlsabresd.conf ]
> # | ### u-boot-fslc settings ###
> # |
> -# | SPL_BINARY_pn-u-boot-fslc = "SPL"
> -# | UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> -# | UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> +# | SPL_BINARY:pn-u-boot-fslc = "SPL"
> +# | UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> +# | UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> # |
> # | ### u-boot-imx settings ###
> # |
> # | # The u-boot-imx does not provide unified functionality for DL/Q/QP SoC
> # | # variants. Change the defconfig to the targeted SoC variant.
> -# | UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> -# | UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> +# | UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> +# | UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> # `----
> #
> # As result, the 'UBOOT_SUFFIX' is dynamically set based on the preferred U-Boot
> @@ -61,7 +61,7 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
> # | UBOOT_MACHINE = "mx53loco_config"
> # `----
> IMX_DEFAULT_BOOTLOADER ??= "u-boot-fslc"
> -UBOOT_SUFFIX ?= "${UBOOT_SUFFIX_pn-${IMX_DEFAULT_BOOTLOADER}}"
> +UBOOT_SUFFIX ?= "${UBOOT_SUFFIX:pn-${IMX_DEFAULT_BOOTLOADER}}"
>
> # We need to export the original variable to allow it to be used when generating
> # wic based images.
> @@ -75,33 +75,33 @@ PREFERRED_PROVIDER_virtual/bootloader ??= "${IMX_DEFAULT_BOOTLOADER}"
>
> PREFERRED_PROVIDER_u-boot-mxsboot-native ??= "u-boot-fslc-mxsboot-native"
>
> -UBOOT_ENTRYPOINT_mxs = "0x40008000"
> -UBOOT_ENTRYPOINT_mx51 = "0x90008000"
> -UBOOT_ENTRYPOINT_mx53 = "0x70008000"
> -UBOOT_ENTRYPOINT_mx6 = "0x10008000"
> -UBOOT_ENTRYPOINT_mx6sl = "0x80008000"
> -UBOOT_ENTRYPOINT_mx6sll = "0x80008000"
> -UBOOT_ENTRYPOINT_mx6sx = "0x80008000"
> -UBOOT_ENTRYPOINT_mx6ul = "0x80008000"
> -UBOOT_ENTRYPOINT_mx6ull = "0x80008000"
> -UBOOT_ENTRYPOINT_mx6ulz = "0x80008000"
> -UBOOT_ENTRYPOINT_mx7 = "0x80008000"
> -UBOOT_ENTRYPOINT_mx7ulp = "0x60008000"
> -UBOOT_ENTRYPOINT_mx8m = "0x40480000"
> -UBOOT_ENTRYPOINT_vf = "0x80008000"
> +UBOOT_ENTRYPOINT:mxs = "0x40008000"
> +UBOOT_ENTRYPOINT:mx51 = "0x90008000"
> +UBOOT_ENTRYPOINT:mx53 = "0x70008000"
> +UBOOT_ENTRYPOINT:mx6 = "0x10008000"
> +UBOOT_ENTRYPOINT:mx6sl = "0x80008000"
> +UBOOT_ENTRYPOINT:mx6sll = "0x80008000"
> +UBOOT_ENTRYPOINT:mx6sx = "0x80008000"
> +UBOOT_ENTRYPOINT:mx6ul = "0x80008000"
> +UBOOT_ENTRYPOINT:mx6ull = "0x80008000"
> +UBOOT_ENTRYPOINT:mx6ulz = "0x80008000"
> +UBOOT_ENTRYPOINT:mx7 = "0x80008000"
> +UBOOT_ENTRYPOINT:mx7ulp = "0x60008000"
> +UBOOT_ENTRYPOINT:mx8m = "0x40480000"
> +UBOOT_ENTRYPOINT:vf = "0x80008000"
>
> # Some derivates can utilize the boot container provided by U-Boot,
> # below variable sets that those machines which have a imx-boot-container
> # in their MACHINEOVERRIDES can inherit a imx-boot-container class
> UBOOT_PROVIDES_BOOT_CONTAINER = "0"
> -UBOOT_PROVIDES_BOOT_CONTAINER_imx-boot-container = "1"
> +UBOOT_PROVIDES_BOOT_CONTAINER:imx-boot-container = "1"
>
> PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
> XSERVER_DRIVER = "xf86-video-fbdev"
> -XSERVER_DRIVER_imxgpu2d = "xf86-video-imx-vivante"
> -XSERVER_DRIVER_vf = "xf86-video-modesetting"
> -XSERVER_DRIVER_append_mx8 = " xf86-video-modesetting"
> -XSERVER_DRIVER_use-mainline-bsp = " \
> +XSERVER_DRIVER:imxgpu2d = "xf86-video-imx-vivante"
> +XSERVER_DRIVER:vf = "xf86-video-modesetting"
> +XSERVER_DRIVER:append:mx8 = " xf86-video-modesetting"
> +XSERVER_DRIVER:use-mainline-bsp = " \
> xf86-video-fbdev \
> xf86-video-modesetting \
> xserver-xorg-extension-glx \
> @@ -118,41 +118,41 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
> # ARM_INSTRUCTION_SET = "thumb"
> #
> # handled by software
> -# DEFAULTTUNE_mx6 ?= "cortexa9t-neon"
> +# DEFAULTTUNE:mx6 ?= "cortexa9t-neon"
> # handled by hardware
> -DEFAULTTUNE_mx6 ?= "cortexa9thf-neon"
> -DEFAULTTUNE_mx6ul ?= "cortexa7thf-neon"
> -DEFAULTTUNE_mx6ull ?= "cortexa7thf-neon"
> -DEFAULTTUNE_mx6ulz ?= "cortexa7thf-neon"
> -DEFAULTTUNE_mx7 ?= "cortexa7thf-neon"
> -DEFAULTTUNE_vf ?= "cortexa5thf-neon"
> +DEFAULTTUNE:mx6 ?= "cortexa9thf-neon"
> +DEFAULTTUNE:mx6ul ?= "cortexa7thf-neon"
> +DEFAULTTUNE:mx6ull ?= "cortexa7thf-neon"
> +DEFAULTTUNE:mx6ulz ?= "cortexa7thf-neon"
> +DEFAULTTUNE:mx7 ?= "cortexa7thf-neon"
> +DEFAULTTUNE:vf ?= "cortexa5thf-neon"
>
> -DEFAULTTUNE_mx8m ?= "cortexa53-crypto"
> -DEFAULTTUNE_mx8qm ?= "cortexa72-cortexa53-crypto"
> -DEFAULTTUNE_mx8qxp ?= "cortexa35-crypto"
> +DEFAULTTUNE:mx8m ?= "cortexa53-crypto"
> +DEFAULTTUNE:mx8qm ?= "cortexa72-cortexa53-crypto"
> +DEFAULTTUNE:mx8qxp ?= "cortexa35-crypto"
>
> INHERIT += "machine-overrides-extender"
>
> -MACHINEOVERRIDES_EXTENDER_mx25 = "use-mainline-bsp"
> -MACHINEOVERRIDES_EXTENDER_mx6q = "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx6dl = "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
> -MACHINEOVERRIDES_EXTENDER_mx6sx = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx6sl = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
> -MACHINEOVERRIDES_EXTENDER_mx6sll = "imxfbdev:imxpxp:imxepdc"
> -MACHINEOVERRIDES_EXTENDER_mx6ul = "imxfbdev:imxpxp"
> -MACHINEOVERRIDES_EXTENDER_mx6ull = "imxfbdev:imxpxp:imxepdc"
> -MACHINEOVERRIDES_EXTENDER_mx6ulz = "imxfbdev:imxpxp:imxepdc"
> -MACHINEOVERRIDES_EXTENDER_mx7d = "imxfbdev:imxpxp:imxepdc"
> -MACHINEOVERRIDES_EXTENDER_mx7ulp = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8qm = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8mm = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8mn = "imxdrm:imxgpu:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8mp = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8qxp = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> -MACHINEOVERRIDES_EXTENDER_mx8dxl = "imxfbdev"
> -
> -MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp = " \
> +MACHINEOVERRIDES_EXTENDER:mx25 = "use-mainline-bsp"
> +MACHINEOVERRIDES_EXTENDER:mx6q = "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx6dl = "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
> +MACHINEOVERRIDES_EXTENDER:mx6sx = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx6sl = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
> +MACHINEOVERRIDES_EXTENDER:mx6sll = "imxfbdev:imxpxp:imxepdc"
> +MACHINEOVERRIDES_EXTENDER:mx6ul = "imxfbdev:imxpxp"
> +MACHINEOVERRIDES_EXTENDER:mx6ull = "imxfbdev:imxpxp:imxepdc"
> +MACHINEOVERRIDES_EXTENDER:mx6ulz = "imxfbdev:imxpxp:imxepdc"
> +MACHINEOVERRIDES_EXTENDER:mx7d = "imxfbdev:imxpxp:imxepdc"
> +MACHINEOVERRIDES_EXTENDER:mx7ulp = "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8qm = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8mm = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8mn = "imxdrm:imxgpu:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8mp = "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8qxp = "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> +MACHINEOVERRIDES_EXTENDER:mx8dxl = "imxfbdev"
> +
> +MACHINEOVERRIDES_EXTENDER_FILTER_OUT:use-mainline-bsp = " \
> imx \
> \
> mx6 \
> @@ -182,40 +182,40 @@ MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp = " \
>
> # Sub-architecture support
> MACHINE_SOCARCH_SUFFIX ?= ""
> -MACHINE_SOCARCH_SUFFIX_mx6q = "-mx6qdl"
> -MACHINE_SOCARCH_SUFFIX_mx6dl = "-mx6qdl"
> -MACHINE_SOCARCH_SUFFIX_mx6sx = "-mx6sx"
> -MACHINE_SOCARCH_SUFFIX_mx6sl = "-mx6sl"
> -MACHINE_SOCARCH_SUFFIX_mx6sll= "-mx6sll"
> -MACHINE_SOCARCH_SUFFIX_mx7d = "-mx7d"
> -MACHINE_SOCARCH_SUFFIX_mx7ulp = "-mx7ulp"
> -MACHINE_SOCARCH_SUFFIX_vf60 = "-vf60"
> -MACHINE_SOCARCH_SUFFIX_vf50 = "-vf50"
> -MACHINE_SOCARCH_SUFFIX_mx6ul = "-mx6ul"
> -MACHINE_SOCARCH_SUFFIX_mx6ull = "-mx6ul"
> -MACHINE_SOCARCH_SUFFIX_mx6ulz = "-mx6ul"
> -MACHINE_SOCARCH_SUFFIX_mx8qm = "-mx8"
> -MACHINE_SOCARCH_SUFFIX_mx8mm = "-mx8mm"
> -MACHINE_SOCARCH_SUFFIX_mx8mn = "-mx8mn"
> -MACHINE_SOCARCH_SUFFIX_mx8mp = "-mx8mp"
> -MACHINE_SOCARCH_SUFFIX_mx8mq = "-mx8m"
> -MACHINE_SOCARCH_SUFFIX_mx8qxp = "-mx8"
> -MACHINE_SOCARCH_SUFFIX_mx8dxl = "-mx8dxl"
> -MACHINE_SOCARCH_SUFFIX_use-mainline-bsp = "-imx"
> +MACHINE_SOCARCH_SUFFIX:mx6q = "-mx6qdl"
> +MACHINE_SOCARCH_SUFFIX:mx6dl = "-mx6qdl"
> +MACHINE_SOCARCH_SUFFIX:mx6sx = "-mx6sx"
> +MACHINE_SOCARCH_SUFFIX:mx6sl = "-mx6sl"
> +MACHINE_SOCARCH_SUFFIX:mx6sll= "-mx6sll"
> +MACHINE_SOCARCH_SUFFIX:mx7d = "-mx7d"
> +MACHINE_SOCARCH_SUFFIX:mx7ulp = "-mx7ulp"
> +MACHINE_SOCARCH_SUFFIX:vf60 = "-vf60"
> +MACHINE_SOCARCH_SUFFIX:vf50 = "-vf50"
> +MACHINE_SOCARCH_SUFFIX:mx6ul = "-mx6ul"
> +MACHINE_SOCARCH_SUFFIX:mx6ull = "-mx6ul"
> +MACHINE_SOCARCH_SUFFIX:mx6ulz = "-mx6ul"
> +MACHINE_SOCARCH_SUFFIX:mx8qm = "-mx8"
> +MACHINE_SOCARCH_SUFFIX:mx8mm = "-mx8mm"
> +MACHINE_SOCARCH_SUFFIX:mx8mn = "-mx8mn"
> +MACHINE_SOCARCH_SUFFIX:mx8mp = "-mx8mp"
> +MACHINE_SOCARCH_SUFFIX:mx8mq = "-mx8m"
> +MACHINE_SOCARCH_SUFFIX:mx8qxp = "-mx8"
> +MACHINE_SOCARCH_SUFFIX:mx8dxl = "-mx8dxl"
> +MACHINE_SOCARCH_SUFFIX:use-mainline-bsp = "-imx"
>
> MACHINE_ARCH_FILTER = "virtual/kernel"
> -MACHINE_SOCARCH_FILTER_append_imx = " \
> +MACHINE_SOCARCH_FILTER:append:imx = " \
> alsa-lib \
> gstreamer1.0 \
> weston \
> "
> -MACHINE_SOCARCH_FILTER_append_imxvpu = " \
> +MACHINE_SOCARCH_FILTER:append:imxvpu = " \
> imx-codec \
> imx-vpuwrap \
> libimxvpuapi \
> virtual/imxvpu \
> "
> -MACHINE_SOCARCH_FILTER_append_imxgpu = " \
> +MACHINE_SOCARCH_FILTER:append:imxgpu = " \
> virtual/egl \
> virtual/mesa \
> virtual/libopenvg \
> @@ -225,15 +225,15 @@ MACHINE_SOCARCH_FILTER_append_imxgpu = " \
> opencv \
> pango \
> "
> -MACHINE_SOCARCH_FILTER_append_imxgpu2d = " \
> +MACHINE_SOCARCH_FILTER:append:imxgpu2d = " \
> virtual/libg2d \
> "
> -MACHINE_SOCARCH_FILTER_append_imxgpu3d = " \
> +MACHINE_SOCARCH_FILTER:append:imxgpu3d = " \
> virtual/libgl \
> virtual/libgles1 \
> virtual/libgles2 \
> "
> -MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
> +MACHINE_SOCARCH_FILTER:append:use-mainline-bsp = " \
> virtual/egl \
> virtual/libopenvg \
> virtual/libg2d \
> @@ -245,23 +245,23 @@ MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
> pango \
> qtbase \
> "
> -MACHINE_SOCARCH_FILTER_append_mx6q = " \
> +MACHINE_SOCARCH_FILTER:append:mx6q = " \
> opencl-icd-loader \
> opencl-clhpp \
> opencl-headers \
> "
> -MACHINE_SOCARCH_FILTER_append_mx8 = " \
> +MACHINE_SOCARCH_FILTER:append:mx8 = " \
> opencl-icd-loader \
> opencl-clhpp \
> opencl-headers \
> "
> -MACHINE_SOCARCH_FILTER_append_mx8qm = " \
> +MACHINE_SOCARCH_FILTER:append:mx8qm = " \
> virtual/libopenvx \
> "
>
> INHERIT += "fsl-dynamic-packagearch"
>
> -SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
> +SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS:append = " \
> imx-gpu-viv->kernel-module-imx-gpu-viv \
> libimxvpuapi->virtual/imxvpu \
> imx-vpuwrap->virtual/imxvpu \
> @@ -271,44 +271,44 @@ SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
>
> # Firmware
> MACHINE_FIRMWARE ?= ""
> -MACHINE_FIRMWARE_append_mx25 = " firmware-imx-sdma-imx25"
> -MACHINE_FIRMWARE_append_mx27 = " firmware-imx-vpu-imx27"
> -MACHINE_FIRMWARE_append_mx7d = " linux-firmware-imx-sdma-imx7d firmware-imx-epdc"
> -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-imx-sdma-imx6q"
> -MACHINE_FIRMWARE_append_mx6q = " firmware-imx-vpu-imx6q"
> -MACHINE_FIRMWARE_append_mx6dl = " firmware-imx-vpu-imx6d firmware-imx-epdc"
> -MACHINE_FIRMWARE_append_mx6sl = " firmware-imx-epdc"
> -MACHINE_FIRMWARE_append_mx6sll = " firmware-imx-epdc"
> -MACHINE_FIRMWARE_append_mx6ull = " firmware-imx-epdc"
> -MACHINE_FIRMWARE_append_mx53 = " firmware-imx-vpu-imx53 firmware-imx-sdma-imx53"
> -MACHINE_FIRMWARE_append_mx51 = " firmware-imx-vpu-imx51 firmware-imx-sdma-imx51"
> -MACHINE_FIRMWARE_append_mx8mm = " linux-firmware-imx-sdma-imx7d"
> -MACHINE_FIRMWARE_append_mx8mn = " linux-firmware-imx-sdma-imx7d"
> -MACHINE_FIRMWARE_append_mx8mp = " linux-firmware-imx-sdma-imx7d firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
> -MACHINE_FIRMWARE_append_mx8mq = " linux-firmware-imx-sdma-imx7d"
> -MACHINE_FIRMWARE_append_mx8qm = " firmware-imx-vpu-imx8"
> -MACHINE_FIRMWARE_append_mx8qxp = " firmware-imx-vpu-imx8"
> -MACHINE_FIRMWARE_append_use-mainline-bsp = " linux-firmware-imx-sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q firmware-imx-vpu-imx6d"
> +MACHINE_FIRMWARE:append:mx25 = " firmware-imx-sdma-imx25"
> +MACHINE_FIRMWARE:append:mx27 = " firmware-imx-vpu-imx27"
> +MACHINE_FIRMWARE:append:mx7d = " linux-firmware-imx-sdma-imx7d firmware-imx-epdc"
> +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-imx-sdma-imx6q"
> +MACHINE_FIRMWARE:append:mx6q = " firmware-imx-vpu-imx6q"
> +MACHINE_FIRMWARE:append:mx6dl = " firmware-imx-vpu-imx6d firmware-imx-epdc"
> +MACHINE_FIRMWARE:append:mx6sl = " firmware-imx-epdc"
> +MACHINE_FIRMWARE:append:mx6sll = " firmware-imx-epdc"
> +MACHINE_FIRMWARE:append:mx6ull = " firmware-imx-epdc"
> +MACHINE_FIRMWARE:append:mx53 = " firmware-imx-vpu-imx53 firmware-imx-sdma-imx53"
> +MACHINE_FIRMWARE:append:mx51 = " firmware-imx-vpu-imx51 firmware-imx-sdma-imx51"
> +MACHINE_FIRMWARE:append:mx8mm = " linux-firmware-imx-sdma-imx7d"
> +MACHINE_FIRMWARE:append:mx8mn = " linux-firmware-imx-sdma-imx7d"
> +MACHINE_FIRMWARE:append:mx8mp = " linux-firmware-imx-sdma-imx7d firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
> +MACHINE_FIRMWARE:append:mx8mq = " linux-firmware-imx-sdma-imx7d"
> +MACHINE_FIRMWARE:append:mx8qm = " firmware-imx-vpu-imx8"
> +MACHINE_FIRMWARE:append:mx8qxp = " firmware-imx-vpu-imx8"
> +MACHINE_FIRMWARE:append:use-mainline-bsp = " linux-firmware-imx-sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q firmware-imx-vpu-imx6d"
>
> MACHINE_EXTRA_RRECOMMENDS += "${MACHINE_FIRMWARE}"
>
> # Extra audio support
> IMX_ALSA_EXTRA = ""
> -IMX_ALSA_EXTRA_use-nxp-bsp = "imx-alsa-plugins"
> -MACHINE_EXTRA_RRECOMMENDS_append_mx6 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
> -MACHINE_EXTRA_RRECOMMENDS_append_mx7 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
> -MACHINE_EXTRA_RRECOMMENDS_append_mx8 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
> +IMX_ALSA_EXTRA:use-nxp-bsp = "imx-alsa-plugins"
> +MACHINE_EXTRA_RRECOMMENDS:append:mx6 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
> +MACHINE_EXTRA_RRECOMMENDS:append:mx7 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
> +MACHINE_EXTRA_RRECOMMENDS:append:mx8 = " ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}', '', d)}"
>
> # Extra Cypress Wi-Fi and BTW firmware (Murata)
> -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
> -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
> -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
> -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
> -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
> +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
> +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
> +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
> +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
> +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
>
> # Extra QCA Wi-Fi & BTE driver and firmware
> -MACHINE_EXTRA_RRECOMMENDS_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-fsl-qca6174', '', d)}"
> -MACHINE_EXTRA_RRECOMMENDS_append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-fsl-qca9377', '', d)}"
> +MACHINE_EXTRA_RRECOMMENDS:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-fsl-qca6174', '', d)}"
> +MACHINE_EXTRA_RRECOMMENDS:append = " ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-fsl-qca9377', '', d)}"
>
> # Extra udev rules
> MACHINE_EXTRA_RRECOMMENDS += "udev-rules-imx"
> @@ -320,29 +320,29 @@ MACHINE_EXTRA_RRECOMMENDS += " \
>
> # GStreamer 1.0 plugins
> MACHINE_GSTREAMER_1_0_PLUGIN ?= ""
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx6dl ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx6q ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx6sl ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx6sx ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx6ul ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx6ull ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx7d ?= "gstreamer1.0-plugins-imx-meta"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mm ?= "imx-gst1.0-plugin"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mn ?= "imx-gst1.0-plugin"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mp ?= "imx-gst1.0-plugin"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mq ?= "imx-gst1.0-plugin"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx8qm ?= "imx-gst1.0-plugin"
> -MACHINE_GSTREAMER_1_0_PLUGIN_mx8qxp ?= "imx-gst1.0-plugin"
> -
> -PREFERRED_VERSION_gstreamer1.0_mx8 ?= "1.16.2.imx"
> -PREFERRED_VERSION_gstreamer1.0-plugins-base_mx8 ?= "1.16.2.imx"
> -PREFERRED_VERSION_gstreamer1.0-plugins-good_mx8 ?= "1.16.3.imx"
> -PREFERRED_VERSION_gstreamer1.0-plugins-bad_mx8 ?= "1.16.3.imx"
> -PREFERRED_VERSION_gstreamer1.0-libav_mx8 ?= "1.16.0"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx6dl ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx6q ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx6sl ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx6sx ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx6ul ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx6ull ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx7d ?= "gstreamer1.0-plugins-imx-meta"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mm ?= "imx-gst1.0-plugin"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mn ?= "imx-gst1.0-plugin"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mp ?= "imx-gst1.0-plugin"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mq ?= "imx-gst1.0-plugin"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx8qm ?= "imx-gst1.0-plugin"
> +MACHINE_GSTREAMER_1_0_PLUGIN:mx8qxp ?= "imx-gst1.0-plugin"
> +
> +PREFERRED_VERSION_gstreamer1.0:mx8 ?= "1.16.2.imx"
> +PREFERRED_VERSION_gstreamer1.0-plugins-base:mx8 ?= "1.16.2.imx"
> +PREFERRED_VERSION_gstreamer1.0-plugins-good:mx8 ?= "1.16.3.imx"
> +PREFERRED_VERSION_gstreamer1.0-plugins-bad:mx8 ?= "1.16.3.imx"
> +PREFERRED_VERSION_gstreamer1.0-libav:mx8 ?= "1.16.0"
>
> # Determines if the SoC has support for Vivante kernel driver
> SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT = "0"
> -SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_imxgpu = "1"
> +SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT:imxgpu = "1"
>
> # Handle Vivante kernel driver setting:
> # 0 - machine does not have Vivante GPU driver support
> @@ -355,59 +355,59 @@ PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
> PREFERRED_PROVIDER_virtual/libgles1 ?= "mesa"
> PREFERRED_PROVIDER_virtual/libgles2 ?= "mesa"
>
> -PREFERRED_PROVIDER_virtual/egl_imxgpu ?= "imx-gpu-viv"
> -PREFERRED_PROVIDER_virtual/libgl_imxgpu3d ?= "imx-gpu-viv"
> -PREFERRED_PROVIDER_virtual/libgles1_imxgpu3d ?= "imx-gpu-viv"
> -PREFERRED_PROVIDER_virtual/libgles2_imxgpu3d ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_virtual/egl:imxgpu ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_virtual/libgl:imxgpu3d ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_virtual/libgles1:imxgpu3d ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_virtual/libgles2:imxgpu3d ?= "imx-gpu-viv"
> PREFERRED_PROVIDER_virtual/libg2d ?= "imx-gpu-g2d"
> -PREFERRED_PROVIDER_virtual/libg2d_imxdpu ?= "imx-dpu-g2d"
> -PREFERRED_PROVIDER_opencl-clhpp_imxgpu ?= "imx-gpu-viv"
> -PREFERRED_PROVIDER_opencl-headers_imxgpu ?= "imx-gpu-viv"
> -PREFERRED_PROVIDER_opencl-icd-loader_imxgpu ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_virtual/libg2d:imxdpu ?= "imx-dpu-g2d"
> +PREFERRED_PROVIDER_opencl-clhpp:imxgpu ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_opencl-headers:imxgpu ?= "imx-gpu-viv"
> +PREFERRED_PROVIDER_opencl-icd-loader:imxgpu ?= "imx-gpu-viv"
>
> -PREFERRED_VERSION_weston_imx ?= "9.0.0.imx"
> -PREFERRED_VERSION_weston_use-mainline-bsp = ""
> +PREFERRED_VERSION_weston:imx ?= "9.0.0.imx"
> +PREFERRED_VERSION_weston:use-mainline-bsp = ""
>
> -PREFERRED_VERSION_wayland-protocols_mx6 ?= "1.20.imx"
> -PREFERRED_VERSION_wayland-protocols_mx7 ?= "1.20.imx"
> -PREFERRED_VERSION_wayland-protocols_mx8 ?= "1.20.imx"
> +PREFERRED_VERSION_wayland-protocols:mx6 ?= "1.20.imx"
> +PREFERRED_VERSION_wayland-protocols:mx7 ?= "1.20.imx"
> +PREFERRED_VERSION_wayland-protocols:mx8 ?= "1.20.imx"
>
> # Use i.MX libdrm Version
> -PREFERRED_VERSION_libdrm_mx6 ?= "2.4.102.imx"
> -PREFERRED_VERSION_libdrm_mx7 ?= "2.4.102.imx"
> -PREFERRED_VERSION_libdrm_mx8 ?= "2.4.102.imx"
> +PREFERRED_VERSION_libdrm:mx6 ?= "2.4.102.imx"
> +PREFERRED_VERSION_libdrm:mx7 ?= "2.4.102.imx"
> +PREFERRED_VERSION_libdrm:mx8 ?= "2.4.102.imx"
>
> # Use i.MX optee Version
> -PREFERRED_VERSION_optee-os_mx8 ?= "3.10.0.imx"
> -PREFERRED_VERSION_optee-client_mx8 ?= "3.10.0.imx"
> -PREFERRED_VERSION_optee-test_mx8 ?= "3.10.0.imx"
> +PREFERRED_VERSION_optee-os:mx8 ?= "3.10.0.imx"
> +PREFERRED_VERSION_optee-client:mx8 ?= "3.10.0.imx"
> +PREFERRED_VERSION_optee-test:mx8 ?= "3.10.0.imx"
>
> #Use i.MX opencv Version for mx8
> -PREFERRED_VERSION_opencv_mx8 ?= "4.5.2.imx"
> +PREFERRED_VERSION_opencv:mx8 ?= "4.5.2.imx"
>
> # Handle default kernel
> IMX_DEFAULT_KERNEL = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mxs = "linux-fslc"
> -IMX_DEFAULT_KERNEL_mx5 = "linux-fslc"
> -IMX_DEFAULT_KERNEL_mx6 = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mx7 = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mx8 = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mx7ulp = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mx6sll = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mx6ul = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_mx6ull = "linux-fslc-imx"
> -IMX_DEFAULT_KERNEL_use-mainline-bsp = "linux-fslc"
> +IMX_DEFAULT_KERNEL:mxs = "linux-fslc"
> +IMX_DEFAULT_KERNEL:mx5 = "linux-fslc"
> +IMX_DEFAULT_KERNEL:mx6 = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:mx7 = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:mx8 = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:mx7ulp = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:mx6sll = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:mx6ul = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:mx6ull = "linux-fslc-imx"
> +IMX_DEFAULT_KERNEL:use-mainline-bsp = "linux-fslc"
>
> PREFERRED_PROVIDER_virtual/kernel ??= "${IMX_DEFAULT_KERNEL}"
>
> SOC_DEFAULT_IMAGE_FSTYPES = "wic.bmap wic.gz"
> -SOC_DEFAULT_IMAGE_FSTYPES_mxs = "uboot-mxsboot-sdcard wic.bmap wic.gz"
> +SOC_DEFAULT_IMAGE_FSTYPES:mxs = "uboot-mxsboot-sdcard wic.bmap wic.gz"
>
> # Do not update fstab file when using wic images
> WIC_CREATE_EXTRA_ARGS ?= "--no-fstab-update"
>
> OPTEE_BOOT_IMAGE = "uTee"
> -OPTEE_BOOT_IMAGE_aarch64 = ""
> +OPTEE_BOOT_IMAGE:aarch64 = ""
>
> IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
>
> @@ -419,7 +419,7 @@ IMAGE_BOOT_FILES ?= " \
>
> ### wic default support
> OPTEE_WKS_FILE_DEPENDS = "optee-os"
> -OPTEE_WKS_FILE_DEPENDS_aarch64 = ""
> +OPTEE_WKS_FILE_DEPENDS:aarch64 = ""
>
> WKS_FILE_DEPENDS ?= " \
> virtual/bootloader \
> @@ -429,8 +429,8 @@ WKS_FILE_DEPENDS ?= " \
> ${@bb.utils.contains('MACHINE_FEATURES', 'optee', '${OPTEE_WKS_FILE_DEPENDS}', '', d)} \
> "
>
> -WKS_FILE_DEPENDS_append_mx8 = " imx-boot"
> -WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
> +WKS_FILE_DEPENDS:append:mx8 = " imx-boot"
> +WKS_FILE_DEPENDS:append:mx8m = " imx-boot"
>
> # We need to restrict the append so we don't add this for other i.MX SoC's.
> # Derivatives that are not yet adopted the usage of boot container provided
> @@ -444,15 +444,15 @@ WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
> # deployment task extesion execution defined in imx-boot-container class.
> # For NXP BSP: rename is done in 'imx-boot' recipe at the execution of compile
> # task.
> -WKS_FILE_DEPENDS_append_use-mainline-bsp_aarch64 = " \
> +WKS_FILE_DEPENDS:append:use-mainline-bsp:aarch64 = " \
> ${@oe.utils.ifelse(d.getVar('UBOOT_PROVIDES_BOOT_CONTAINER') == '0', 'imx-boot', '')} \
> "
>
> SOC_DEFAULT_WKS_FILE ?= "imx-uboot-bootpart.wks.in"
> -SOC_DEFAULT_WKS_FILE_mx8m ?= "imx-imx-boot-bootpart.wks.in"
> +SOC_DEFAULT_WKS_FILE:mx8m ?= "imx-imx-boot-bootpart.wks.in"
>
> -SOC_DEFAULT_WKS_FILE_mx8 ?= "imx-imx-boot-bootpart.wks.in"
> -SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-bootpart.wks.in"
> +SOC_DEFAULT_WKS_FILE:mx8 ?= "imx-imx-boot-bootpart.wks.in"
> +SOC_DEFAULT_WKS_FILE:mxs ?= "imx-uboot-mxs-bootpart.wks.in"
>
> # Boot container built as a part of mainline U-Boot uses different WKS
> # file as the entire mx8m series, as U-Boot versions later than 2021.04 are
> @@ -462,19 +462,19 @@ SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-bootpart.wks.in"
> # replacement of imx-boot from NXP.
> # Creation of those binary files is controlled by UBOOT_PROVIDES_BOOT_CONTAINER
> # variable defined above.
> -SOC_DEFAULT_WKS_FILE_imx-boot-container ?= "imx-boot-container-bootpart.wks.in"
> +SOC_DEFAULT_WKS_FILE:imx-boot-container ?= "imx-boot-container-bootpart.wks.in"
>
> WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
>
> SERIAL_CONSOLES = "115200;ttymxc0"
> -SERIAL_CONSOLES_mxs = "115200;ttyAMA0"
> +SERIAL_CONSOLES:mxs = "115200;ttyAMA0"
>
> KERNEL_IMAGETYPE = "zImage"
> -KERNEL_IMAGETYPE_aarch64 = "Image"
> +KERNEL_IMAGETYPE:aarch64 = "Image"
>
> MACHINE_FEATURES = "usbgadget usbhost vfat alsa touchscreen"
>
> -# Add the ability to specify _imx machines
> +# Add the ability to specify :imx machines
> MACHINEOVERRIDES =. "imx:"
>
> -HOSTTOOLS_NONFATAL_append_mx8 = " sha384sum"
> +HOSTTOOLS_NONFATAL:append:mx8 = " sha384sum"
> diff --git a/conf/machine/include/imx8dxl-evk.inc b/conf/machine/include/imx8dxl-evk.inc
> index 2868b4d6c1c3..4e75f8c4bbd3 100644
> --- a/conf/machine/include/imx8dxl-evk.inc
> +++ b/conf/machine/include/imx8dxl-evk.inc
> @@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
> IMX_DEFAULT_BSP = "nxp"
>
> MACHINE_FEATURES += "pci bcm43455 bcm4356"
> -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
>
> # Don't include kernels in standard images
> RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> @@ -23,7 +23,7 @@ USE_VT = "0"
> KERNEL_DEVICETREE = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \
> "
>
> diff --git a/conf/machine/include/imx8mm-evk.inc b/conf/machine/include/imx8mm-evk.inc
> index f458c56de9b7..1295de1d8271 100644
> --- a/conf/machine/include/imx8mm-evk.inc
> +++ b/conf/machine/include/imx8mm-evk.inc
> @@ -11,19 +11,19 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43455 bcm4356"
> # and pin it to NXP BSP only
> # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
> # a full support for it yet.
> -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359 qca9377"
> +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359 qca9377"
>
> KERNEL_DEVICETREE = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-pcie-ep.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
> "
> UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
>
> -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
>
> UBOOT_SUFFIX = "bin"
>
> @@ -51,18 +51,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> # to be used to define the boot process.
> # We opt-in for Syslinux, since it is designated as a preferred
> # distro boot mode according to the U-Boot documentation.
> -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Mini EVK"
> +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Mini EVK"
>
> -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M Mini EVK"
> -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp = "console=${console}"
> -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp = "root=/dev/mmcblk1p2"
> +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M Mini EVK"
> +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp = "console=${console}"
> +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp = "root=/dev/mmcblk1p2"
>
> # Add extlinux.conf to the lis of files, which are deployed onto the
> # boot partition
> -IMAGE_BOOT_FILES_append_use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
> +IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
>
> LOADADDR = ""
> UBOOT_SUFFIX = "bin"
> @@ -73,4 +73,4 @@ OPTEE_BIN_EXT = "8mm"
> TEE_LOAD_ADDR = "0xbe000000"
>
> # Add additional firmware
> -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> diff --git a/conf/machine/include/imx8mn-evk.inc b/conf/machine/include/imx8mn-evk.inc
> index a0e39857c770..411004000b66 100644
> --- a/conf/machine/include/imx8mn-evk.inc
> +++ b/conf/machine/include/imx8mn-evk.inc
> @@ -8,12 +8,12 @@ MACHINE_FEATURES += "wifi bluetooth bcm43455 bcm4356"
> # NXP BSP can consume proprietary jailhouse and Broadcom drivers
> # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
> # a full support for it yet.
> -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359"
> +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359"
>
> KERNEL_DEVICETREE = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-ak5558.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
> @@ -22,8 +22,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> "
> UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
>
> -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
>
> UBOOT_SUFFIX = "bin"
>
> @@ -52,18 +52,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> # to be used to define the boot process.
> # We opt-in for Syslinux, since it is designated as a preferred
> # distro boot mode according to the U-Boot documentation.
> -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Nano EVK"
> +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Nano EVK"
>
> -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M Nano EVK"
> -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp = "console=${console}"
> -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp = "root=/dev/mmcblk1p2"
> +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M Nano EVK"
> +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp = "console=${console}"
> +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp = "root=/dev/mmcblk1p2"
>
> # Add extlinux.conf to the lis of files, which are deployed onto the
> # boot partition
> -IMAGE_BOOT_FILES_append_use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
> +IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
>
> BOOT_SPACE = "65536"
> LOADADDR = ""
> @@ -79,4 +79,4 @@ OPTEE_BIN_EXT = "8mn"
> TEE_LOAD_ADDR = "0x56000000"
>
> # Add additional firmware
> -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> diff --git a/conf/machine/include/imx8mp-evk.inc b/conf/machine/include/imx8mp-evk.inc
> index d070831ff3d3..bc2c038f0076 100644
> --- a/conf/machine/include/imx8mp-evk.inc
> +++ b/conf/machine/include/imx8mp-evk.inc
> @@ -8,7 +8,7 @@ MACHINE_FEATURES += "pci wifi bluetooth"
> # NXP BSP can consume proprietary jailhouse and Marvell drivers
> # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to have
> # a full support for it yet.
> -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse mrvl8997"
> +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse mrvl8997"
>
> # Mainline kernel contains only one DTB file for
> # imx8mpevk machine
> @@ -18,8 +18,8 @@ KERNEL_DEVICETREE = " \
>
> UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
>
> -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
>
> UBOOT_SUFFIX = "bin"
>
> @@ -50,18 +50,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> # to be used to define the boot process.
> # We opt-in for Syslinux, since it is designated as a preferred
> # distro boot mode according to the U-Boot documentation.
> -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Plus EVK"
> +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Plus EVK"
>
> -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M Plus EVK"
> -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp = "console=${console}"
> -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp = "root=/dev/mmcblk1p2"
> +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M Plus EVK"
> +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp = "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp = "console=${console}"
> +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp = "root=/dev/mmcblk1p2"
>
> # Add extlinux.conf to the lis of files, which are deployed onto the
> # boot partition
> -IMAGE_BOOT_FILES_append_use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
> +IMAGE_BOOT_FILES:append:use-mainline-bsp = " extlinux.conf;extlinux/extlinux.conf"
>
> LOADADDR = ""
> UBOOT_SUFFIX = "bin"
> @@ -72,4 +72,4 @@ OPTEE_BIN_EXT = "8mp"
> TEE_LOAD_ADDR = "0x56000000"
>
> # Add additional firmware
> -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> diff --git a/conf/machine/include/imx8x-mek.inc b/conf/machine/include/imx8x-mek.inc
> index 55a28c877e60..0682fbc1be21 100644
> --- a/conf/machine/include/imx8x-mek.inc
> +++ b/conf/machine/include/imx8x-mek.inc
> @@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
> IMX_DEFAULT_BSP = "nxp"
>
> MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
> -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
>
> # Don't include kernels in standard images
> RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> @@ -23,7 +23,7 @@ USE_VT = "0"
> KERNEL_DEVICETREE = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> "
> -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191-rpmsg.dtb \
> freescale/${KERNEL_DEVICETREE_BASENAME}-dsp.dtb \
> @@ -71,4 +71,4 @@ IMXBOOT_TARGETS = \
> BOARD_TYPE = "mek"
>
> # Add additional firmware
> -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> diff --git a/conf/machine/include/qoriq-base.inc b/conf/machine/include/qoriq-base.inc
> index 0a42160f0f30..9bc3ee76c756 100644
> --- a/conf/machine/include/qoriq-base.inc
> +++ b/conf/machine/include/qoriq-base.inc
> @@ -9,8 +9,8 @@ PREFERRED_PROVIDER_nativesdk-u-boot-mkimage ??= "nativesdk-u-boot-tools"
> PREFERRED_VERSION_testfloat = "2a"
>
> SOC_DEFAULT_IMAGE_FSTYPES = "tar.gz"
> -SOC_DEFAULT_IMAGE_FSTYPES_append_ls1043a = " wic.bz2"
> -SOC_DEFAULT_IMAGE_FSTYPES_append_ls1046a = " wic.bz2"
> +SOC_DEFAULT_IMAGE_FSTYPES:append:ls1043a = " wic.bz2"
> +SOC_DEFAULT_IMAGE_FSTYPES:append:ls1046a = " wic.bz2"
> IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
>
> # Composite Image Layout (in KBytes)
> @@ -31,8 +31,8 @@ IMAGE_BOOT_FILES ?= " \
> "
>
> SOC_DEFAULT_WKS_FILE ?= ""
> -SOC_DEFAULT_WKS_FILE_ls1043a ?= "ls104x-uboot-bootpart.wks.in"
> -SOC_DEFAULT_WKS_FILE_ls1046a ?= "ls104x-uboot-bootpart.wks.in"
> +SOC_DEFAULT_WKS_FILE:ls1043a ?= "ls104x-uboot-bootpart.wks.in"
> +SOC_DEFAULT_WKS_FILE:ls1046a ?= "ls104x-uboot-bootpart.wks.in"
>
> WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
>
> diff --git a/conf/machine/include/utilities.inc b/conf/machine/include/utilities.inc
> index f11b588bbe5d..34ce7abcb6d7 100644
> --- a/conf/machine/include/utilities.inc
> +++ b/conf/machine/include/utilities.inc
> @@ -23,6 +23,6 @@ def make_dtb_boot_files(d):
>
> def get_spl_binary(d):
> imx_default_bootloader = d.get('IMX_DEFAULT_BOOTLOADER')
> - spl_binary = d.getVar("SPL_BINARY_pn-%s" % imx_default_bootloader)
> + spl_binary = d.getVar("SPL_BINARY:pn-%s" % imx_default_bootloader)
>
> return spl_binary or ""
> diff --git a/conf/machine/ls1028ardb.conf b/conf/machine/ls1028ardb.conf
> index 63f3802f7959..d70a5a619f9b 100644
> --- a/conf/machine/ls1028ardb.conf
> +++ b/conf/machine/ls1028ardb.conf
> @@ -22,7 +22,7 @@ UBOOT_CONFIG[tfa-secure-boot] = "ls1028ardb_tfa_SECURE_BOOT_defconfig"
> UBOOT_CONFIG[tfa] = "ls1028ardb_tfa_defconfig"
>
> KERNEL_DEVICETREE ?= "freescale/fsl-ls1028a-rdb.dtb freescale/fsl-ls1028a-qds.dtb"
> -KERNEL_DEVICETREE_append_use-nxp-bsp = "\
> +KERNEL_DEVICETREE:append:use-nxp-bsp = "\
> freescale/fsl-ls1028a-rdb-dpdk.dtb \
> "
> KERNEL_DEFCONFIG ?= "defconfig"
> diff --git a/conf/machine/ls1043ardb.conf b/conf/machine/ls1043ardb.conf
> index fa8ab61566c7..4ff3c0acb913 100644
> --- a/conf/machine/ls1043ardb.conf
> +++ b/conf/machine/ls1043ardb.conf
> @@ -27,7 +27,7 @@ KERNEL_DEVICETREE ?= "\
> freescale/fsl-ls1043a-qds.dtb \
> "
> # usdpaa dtb is used for dpdk. TODO: rename in kernel
> -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> freescale/fsl-ls1043a-rdb-sdk.dtb \
> freescale/fsl-ls1043a-rdb-usdpaa.dtb \
> freescale/fsl-ls1043a-qds-sdk.dtb \
> diff --git a/conf/machine/ls1046afrwy.conf b/conf/machine/ls1046afrwy.conf
> index e6eabc0f36df..eb3c0bb6f4a5 100644
> --- a/conf/machine/ls1046afrwy.conf
> +++ b/conf/machine/ls1046afrwy.conf
> @@ -25,7 +25,7 @@ KERNEL_DEVICETREE ?= "\
> freescale/fsl-ls1046a-frwy.dtb \
> "
> # usdpaa dtb is used for dpdk. TODO: rename in kernel
> -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> freescale/fsl-ls1046a-frwy-sdk.dtb \
> freescale/fsl-ls1046a-frwy-usdpaa.dtb \
> "
> diff --git a/conf/machine/ls1046ardb.conf b/conf/machine/ls1046ardb.conf
> index 97fb1e29e36a..8e815295ad4c 100644
> --- a/conf/machine/ls1046ardb.conf
> +++ b/conf/machine/ls1046ardb.conf
> @@ -26,7 +26,7 @@ KERNEL_DEVICETREE ?= "\
> freescale/fsl-ls1046a-qds.dtb \
> "
> # usdpaa dtb is used for dpdk. TODO: rename in kernel
> -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> freescale/fsl-ls1046a-rdb-sdk.dtb \
> freescale/fsl-ls1046a-rdb-usdpaa.dtb \
> freescale/fsl-ls1046a-qds-sdk.dtb \
> diff --git a/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend b/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend
> index 10b66c0e4adc..b7bf3298f6ff 100644
> --- a/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend
> +++ b/dynamic-layers/aglprofilegraphical/recipes-graphics/wayland/weston-init.bbappend
> @@ -1,3 +1,3 @@
> -do_install_append() {
> +do_install:append() {
> rm -f ${D}${sysconfdir}/xdg/weston/weston.ini
> }
> diff --git a/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc b/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc
> index cdd0f08fde77..7d8065f9db46 100644
> --- a/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc
> +++ b/dynamic-layers/chromium-browser-layer/recipes-browser/chromium/chromium-imx.inc
> @@ -1,4 +1,4 @@
> -DEPENDS_append_imxvpu = " imx-vpuwrap"
> +DEPENDS:append:imxvpu = " imx-vpuwrap"
>
> # Additional imx code and patches are included in the chromium-imx git repository.
> # The code below fetches this repository, copies the extra source over to the main
> @@ -26,7 +26,7 @@ do_patch[prefuncs] =+ "add_chromium_imx_patches"
> # * Lost context problems are not known to happen with Vivante GPUs,
> # so it is safe to use ignore-lost-context
> # * Proprietary codecs need to be enabled for h.264 and MP4 support
> -PACKAGECONFIG_append = " ignore-lost-context proprietary-codecs"
> +PACKAGECONFIG:append = " ignore-lost-context proprietary-codecs"
>
> copy_chromium_imx_files() {
> # sources in src/ are already organized in a manner
> diff --git a/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend b/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
> index 0b4c4861b6e3..fb90c73e1d1f 100644
> --- a/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
> +++ b/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
> @@ -1,4 +1,4 @@
> -PACKAGECONFIG_imxgpu3d ??= " \
> +PACKAGECONFIG:imxgpu3d ??= " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland egl', \
> bb.utils.contains('DISTRO_FEATURES', 'x11', 'glx x11', \
> '', d), d)} \
> diff --git a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend b/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend
> index afbaee4323ad..e07d0d54235a 100644
> --- a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend
> +++ b/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-1.0_%.bbappend
> @@ -1,4 +1,4 @@
> -PACKAGECONFIG_imxgpu3d ??= " \
> +PACKAGECONFIG:imxgpu3d ??= " \
> cogl-pango gles2 \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'egl-wayland', \
> bb.utils.contains('DISTRO_FEATURES', 'x11', 'egl-x11', \
> diff --git a/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend b/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend
> index 72d991c7e590..4fc41d058011 100644
> --- a/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend
> +++ b/dynamic-layers/ivi/recipes-graphics/wayland/weston-init.bbappend
> @@ -1 +1 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> diff --git a/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend b/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend
> index 2e648ba34914..06661133569f 100644
> --- a/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend
> +++ b/dynamic-layers/openembedded-layer/recipes-benchmark/glmark2/glmark2_%.bbappend
> @@ -1,4 +1,4 @@
> -# Only _mx8 machine do provide virtual/libgbm required for any drm* flavour
> -DRM-REMOVE_imxgpu = "drm-gl drm-gles2"
> -DRM-REMOVE_imxgpu_mx8 = ""
> -PACKAGECONFIG_remove = "${DRM-REMOVE}"
> +# Only :mx8 machine do provide virtual/libgbm required for any drm* flavour
> +DRM-REMOVE:imxgpu = "drm-gl drm-gles2"
> +DRM-REMOVE:imxgpu:mx8 = ""
> +PACKAGECONFIG:remove = "${DRM-REMOVE}"
> diff --git a/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend b/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend
> index 8c6138c54aae..d07f8ae14d2c 100644
> --- a/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend
> +++ b/dynamic-layers/openembedded-layer/recipes-devtools/luajit/luajit_%.bbappend
> @@ -1,4 +1,4 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
>
> -SRC_URI_append_qoriq-ppc = " file://ppc-fixplt.patch "
> +SRC_URI:append:qoriq-ppc = " file://ppc-fixplt.patch "
>
> diff --git a/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb b/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> index 1793ec06fb4e..9c6be782d6d0 100644
> --- a/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> +++ b/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> @@ -19,15 +19,15 @@ EXTRA_OEMAKE_virtclass-native = 'FMCHOSTMODE=1 FMD_USPACE_HEADER_PATH="${STAGING
> TCLAP_HEADER_PATH="${STAGING_INCDIR}" '
>
> EXTRA_OEMAKE_PLATFORM ?= ""
> -EXTRA_OEMAKE_PLATFORM_ls1043a = "ls1043"
> -EXTRA_OEMAKE_PLATFORM_ls1046a = "ls1046"
> -EXTRA_OEMAKE_PLATFORM_ls1088a = "ls1088"
> -EXTRA_OEMAKE_PLATFORM_p1020 = "p4080ds"
> -EXTRA_OEMAKE_PLATFORM_p2020 = "p4080ds"
> -EXTRA_OEMAKE_PLATFORM_p2041 = "p4080ds"
> -EXTRA_OEMAKE_PLATFORM_p3041 = "p4080ds"
> -EXTRA_OEMAKE_PLATFORM_p4080 = "p4080ds"
> -EXTRA_OEMAKE_PLATFORM_p5040 = "p4080ds"
> +EXTRA_OEMAKE_PLATFORM:ls1043a = "ls1043"
> +EXTRA_OEMAKE_PLATFORM:ls1046a = "ls1046"
> +EXTRA_OEMAKE_PLATFORM:ls1088a = "ls1088"
> +EXTRA_OEMAKE_PLATFORM:p1020 = "p4080ds"
> +EXTRA_OEMAKE_PLATFORM:p2020 = "p4080ds"
> +EXTRA_OEMAKE_PLATFORM:p2041 = "p4080ds"
> +EXTRA_OEMAKE_PLATFORM:p3041 = "p4080ds"
> +EXTRA_OEMAKE_PLATFORM:p4080 = "p4080ds"
> +EXTRA_OEMAKE_PLATFORM:p5040 = "p4080ds"
>
>
> do_compile () {
> diff --git a/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend b/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend
> index f4f4350489cf..be6945744efa 100644
> --- a/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend
> +++ b/dynamic-layers/openembedded-layer/recipes-graphics/xserver-common/xserver-common_%.bbappend
> @@ -1,8 +1,8 @@
> # i.MX extra configuration
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
>
> -SRC_URI_append_imxgpu3d = " \
> +SRC_URI:append:imxgpu3d = " \
> file://0016-xserver-common-enable-iglx-module.patch \
> "
>
> -PACKAGE_ARCH_imxgpu3d = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:imxgpu3d = "${MACHINE_SOCARCH}"
> diff --git a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> index 187681a8b123..8950c151bd77 100644
> --- a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> +++ b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> @@ -1,4 +1,4 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/qt4:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/qt4:"
>
> python __anonymous () {
> families = ['mx6']
> @@ -8,21 +8,21 @@ python __anonymous () {
> d.appendVarFlag('do_configure', 'depends', ' virtual/kernel:do_shared_workdir')
> }
>
> -SRC_URI_append_imxgpu2d += " \
> +SRC_URI:append:imxgpu2d += " \
> file://0001-Add-support-for-i.MX-codecs-to-phonon.patch \
> file://0002-i.MX-video-renderer-Allow-v4l-device-from-environmen.patch \
> file://0003-i.MX6-force-egl-visual-ID-33.patch \
> "
>
> -DEPENDS_append_imxgpu2d = " virtual/kernel virtual/libgles2"
> -QT_GLFLAGS_imxgpu2d = "-opengl es2 -openvg"
> -QT_CONFIG_FLAGS_append_imxgpu2d = " -I${STAGING_KERNEL_DIR}/include/uapi \
> +DEPENDS:append:imxgpu2d = " virtual/kernel virtual/libgles2"
> +QT_GLFLAGS:imxgpu2d = "-opengl es2 -openvg"
> +QT_CONFIG_FLAGS:append:imxgpu2d = " -I${STAGING_KERNEL_DIR}/include/uapi \
> -I${STAGING_KERNEL_DIR}/include/ \
> -DLINUX=1 -DEGL_API_FB=1 \
> -DQT_QPA_EXPERIMENTAL_TOUCHEVENT=1"
>
> # The QT_CONFIG_FLAGS can pollute *.la files with -Dxxx
> -do_compile_append_mx6 () {
> +do_compile:append:mx6 () {
> find lib -name "*.la" | xargs -n1 sed -i 's/-D.*=1//g'
> }
>
> diff --git a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> index bf3fb66eeb72..0d5897adc7f9 100644
> --- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> +++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> @@ -3,35 +3,35 @@
> # Copyright (C) 2016, 2017 O.S. Systems Software LTDA.
> # Copyright (C) 2017-2018 NXP
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
>
> -SRC_URI_append_imxgpu = " \
> +SRC_URI:append:imxgpu = " \
> file://0014-Add-IMX-GPU-support.patch \
> file://0001-egl.prf-Fix-build-error-when-egl-headers-need-platfo.patch \
> "
>
> PACKAGECONFIG_GL_IMX_GPU = ""
> -PACKAGECONFIG_GL_IMX_GPU_mx8 = "gbm kms"
> +PACKAGECONFIG_GL_IMX_GPU:mx8 = "gbm kms"
>
> -PACKAGECONFIG_GL_imxpxp = "gles2"
> -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', ' gl', '', d)} \
> +PACKAGECONFIG_GL:imxpxp = "gles2"
> +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', ' gl', '', d)} \
> ${PACKAGECONFIG_GL_IMX_GPU}"
> -PACKAGECONFIG_GL_imxgpu3d = "gles2 \
> +PACKAGECONFIG_GL:imxgpu3d = "gles2 \
> ${PACKAGECONFIG_GL_IMX_GPU}"
> -PACKAGECONFIG_GL_use-mainline-bsp ?= "gles2 gbm kms"
> +PACKAGECONFIG_GL:use-mainline-bsp ?= "gles2 gbm kms"
>
> PACKAGECONFIG_PLATFORM = ""
> -PACKAGECONFIG_PLATFORM_imxgpu2d = "no-opengl linuxfb"
> -PACKAGECONFIG_PLATFORM_imxgpu3d = " \
> +PACKAGECONFIG_PLATFORM:imxgpu2d = "no-opengl linuxfb"
> +PACKAGECONFIG_PLATFORM:imxgpu3d = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', \
> bb.utils.contains('DISTRO_FEATURES', 'wayland', '', \
> 'eglfs', d), d)}"
> -PACKAGECONFIG_PLATFORM_use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
> +PACKAGECONFIG_PLATFORM:use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
> PACKAGECONFIG += "${PACKAGECONFIG_PLATFORM}"
>
> PACKAGECONFIG_VULKAN_IMX_GPU = ""
> -PACKAGECONFIG_VULKAN_IMX_GPU_mx8 = "vulkan"
> -PACKAGECONFIG_VULKAN_IMX_GPU_mx8mm = ""
> +PACKAGECONFIG_VULKAN_IMX_GPU:mx8 = "vulkan"
> +PACKAGECONFIG_VULKAN_IMX_GPU:mx8mm = ""
> PACKAGECONFIG_VULKAN = ""
> -PACKAGECONFIG_VULKAN_imxgpu = "${PACKAGECONFIG_VULKAN_IMX_GPU}"
> +PACKAGECONFIG_VULKAN:imxgpu = "${PACKAGECONFIG_VULKAN_IMX_GPU}"
> PACKAGECONFIG += "${@bb.utils.contains('DISTRO_FEATURES', 'vulkan', '${PACKAGECONFIG_VULKAN}', '', d)}"
> diff --git a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> index 168db09548ab..c1594e0571b4 100644
> --- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> +++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> @@ -1,8 +1,8 @@
> # etnaviv mesa does not have glx
> -PACKAGECONFIG_remove_use-mainline-bsp = "xcomposite-glx"
> +PACKAGECONFIG:remove:use-mainline-bsp = "xcomposite-glx"
>
> -PACKAGECONFIG_remove_mx6 = "xcomposite-egl xcomposite-glx"
> -PACKAGECONFIG_remove_mx7 = "xcomposite-egl xcomposite-glx"
> +PACKAGECONFIG:remove:mx6 = "xcomposite-egl xcomposite-glx"
> +PACKAGECONFIG:remove:mx7 = "xcomposite-egl xcomposite-glx"
>
> # i.MX8 does never provide native x11, so required dependencies are not met
> -PACKAGECONFIG_remove_mx8 = "xcomposite-egl xcomposite-glx"
> +PACKAGECONFIG:remove:mx8 = "xcomposite-egl xcomposite-glx"
> diff --git a/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend b/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend
> index c7e6d32e4213..7aecf1e466c6 100644
> --- a/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend
> +++ b/dynamic-layers/virtualization-layer/recipes-extended/libvirt/libvirt_%.bbappend
> @@ -1,9 +1,9 @@
> PACKAGECONFIG_qoriq-ppc = "qemu yajl lxc test remote macvtap libvirtd netcf udev python"
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> -SRC_URI_append_qoriq-ppc = " file://qemu.conf"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> +SRC_URI:append:qoriq-ppc = " file://qemu.conf"
>
> -do_install_append_qoriq-ppc() {
> +do_install:append:qoriq-ppc() {
> install -m 0644 ${WORKDIR}/qemu.conf ${D}${sysconfdir}/libvirt/qemu.conf
> }
>
> diff --git a/recipes-bsp/alsa-state/alsa-state.bbappend b/recipes-bsp/alsa-state/alsa-state.bbappend
> index 3a398b2210fc..9433130725d5 100644
> --- a/recipes-bsp/alsa-state/alsa-state.bbappend
> +++ b/recipes-bsp/alsa-state/alsa-state.bbappend
> @@ -1,10 +1,10 @@
> # Append path for freescale layer to include alsa-state asound.conf
> -FILESEXTRAPATHS_prepend_mx6 := "${THISDIR}/${PN}/imx:"
> -FILESEXTRAPATHS_prepend_mx7 := "${THISDIR}/${PN}/imx:"
> -FILESEXTRAPATHS_prepend_mx8 := "${THISDIR}/${PN}/imx:"
> -FILESEXTRAPATHS_prepend_use-mainline-bsp := "${THISDIR}/${PN}/imx:"
> +FILESEXTRAPATHS:prepend:mx6 := "${THISDIR}/${PN}/imx:"
> +FILESEXTRAPATHS:prepend:mx7 := "${THISDIR}/${PN}/imx:"
> +FILESEXTRAPATHS:prepend:mx8 := "${THISDIR}/${PN}/imx:"
> +FILESEXTRAPATHS:prepend:use-mainline-bsp := "${THISDIR}/${PN}/imx:"
>
> -PACKAGE_ARCH_mx6 = "${MACHINE_ARCH}"
> -PACKAGE_ARCH_mx7 = "${MACHINE_ARCH}"
> -PACKAGE_ARCH_mx8 = "${MACHINE_ARCH}"
> -PACKAGE_ARCH_use-mainline-bsp = "${MACHINE_ARCH}"
> +PACKAGE_ARCH:mx6 = "${MACHINE_ARCH}"
> +PACKAGE_ARCH:mx7 = "${MACHINE_ARCH}"
> +PACKAGE_ARCH:mx8 = "${MACHINE_ARCH}"
> +PACKAGE_ARCH:use-mainline-bsp = "${MACHINE_ARCH}"
> diff --git a/recipes-bsp/atf/qoriq-atf_1.5.bb b/recipes-bsp/atf/qoriq-atf_1.5.bb
> index 192083348ea9..b03a6bcb95f5 100644
> --- a/recipes-bsp/atf/qoriq-atf_1.5.bb
> +++ b/recipes-bsp/atf/qoriq-atf_1.5.bb
> @@ -8,7 +8,7 @@ PV = "1.5+git${SRCPV}"
> inherit deploy
>
> DEPENDS += "u-boot-mkimage-native u-boot openssl openssl-native mbedtls rcw cst-native"
> -DEPENDS_append_lx2160a = " ddr-phy"
> +DEPENDS:append:lx2160a = " ddr-phy"
> do_compile[depends] += "u-boot:do_deploy rcw:do_deploy uefi:do_deploy"
>
> S = "${WORKDIR}/git"
> @@ -21,12 +21,12 @@ COMPATIBLE_MACHINE = "(qoriq)"
> PACKAGE_ARCH = "${MACHINE_ARCH}"
>
> PLATFORM = "${MACHINE}"
> -PLATFORM_ls1088ardb-pb = "ls1088ardb"
> +PLATFORM:ls1088ardb-pb = "ls1088ardb"
> PLATFORM_ADDITIONAL_TARGET ??= ""
> -PLATFORM_ADDITIONAL_TARGET_ls1012afrwy = "ls1012afrwy_512mb"
> +PLATFORM_ADDITIONAL_TARGET:ls1012afrwy = "ls1012afrwy_512mb"
>
> RCW_FOLDER ?= "${MACHINE}"
> -RCW_FOLDER_ls1088ardb-pb = "ls1088ardb"
> +RCW_FOLDER:ls1088ardb-pb = "ls1088ardb"
>
> # requires CROSS_COMPILE set by hand as there is no configure script
> export CROSS_COMPILE="${TARGET_PREFIX}"
> @@ -56,16 +56,16 @@ PACKAGECONFIG[optee] = ",,optee-os-qoriq"
> uboot_boot_sec ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa-secure-boot"
> uboot_boot ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa"
> rcw ?= ""
> -rcw_ls1012a = "_default"
> +rcw:ls1012a = "_default"
> rcwsec ?= "_sben"
>
> chassistype ?= "ls2088_1088"
> -chassistype_ls1012a = "ls104x_1012"
> -chassistype_ls1043a = "ls104x_1012"
> -chassistype_ls1046a = "ls104x_1012"
> +chassistype:ls1012a = "ls104x_1012"
> +chassistype:ls1043a = "ls104x_1012"
> +chassistype:ls1046a = "ls104x_1012"
>
> ddrphyopt ?= ""
> -ddrphyopt_lx2160a = "fip_ddr_sec"
> +ddrphyopt:lx2160a = "fip_ddr_sec"
>
> do_configure[noexec] = "1"
>
> diff --git a/recipes-bsp/atf/qoriq-atf_2.3.bb b/recipes-bsp/atf/qoriq-atf_2.3.bb
> index aed32851bc42..2698bd32a99c 100644
> --- a/recipes-bsp/atf/qoriq-atf_2.3.bb
> +++ b/recipes-bsp/atf/qoriq-atf_2.3.bb
> @@ -47,7 +47,7 @@ do_compile() {
> if [ "${NXP_COT}" = "true" -a "${ARM_COT}" = "true" ]; then
> bbfatal " \
> Error!, Both ARM CoT and NXP CoT are enabled. Only one CoT is built in a yocto build, \
> - Don't add nxp-cot and arm-cot into DISTRO_FEATURES_append at the same time."
> + Don't add nxp-cot and arm-cot into DISTRO_FEATURES:append at the same time."
> fi
>
> if [ "${NXP_COT}" = "true" ]; then
> diff --git a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> index 650c1cfded61..6ea16d5be67a 100644
> --- a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> +++ b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> @@ -19,5 +19,5 @@ addtask deploy after do_install before do_build
> PACKAGE_ARCH = "${MACHINE_SOCARCH}"
>
> COMPATIBLE_MACHINE = "(mx8)"
> -COMPATIBLE_MACHINE_mx8m = "(^$)"
> -COMPATIBLE_MACHINE_mx8x = "(^$)"
> +COMPATIBLE_MACHINE:mx8m = "(^$)"
> +COMPATIBLE_MACHINE:mx8x = "(^$)"
> diff --git a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb b/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> index 8ff4a3216060..34040b287de7 100644
> --- a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> +++ b/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> @@ -65,7 +65,7 @@ do_install() {
> # as second one, and for every file match - it creates a separate package,
> # which contains only files that matches the pattern.
> #
> -python populate_packages_prepend() {
> +python populate_packages:prepend() {
> easrcdir = bb.data.expand('${nonarch_base_libdir}/firmware/imx/easrc', d)
> do_split_packages(d, easrcdir, '^easrc-([^_]*).*\.bin',
> output_pattern='firmware-imx-easrc-%s',
> diff --git a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb b/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> index e996c62de957..fd0c2e742265 100644
> --- a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> +++ b/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> @@ -9,7 +9,7 @@ LICENSE = "Proprietary"
> DEPENDS = "libnl zlib"
>
> FCC_TOOLS_FOLDER ?= "qca9377_qca6174_arm32"
> -FCC_TOOLS_FOLDER_aarch64 = "qca9377_qca6174_arm64"
> +FCC_TOOLS_FOLDER:aarch64 = "qca9377_qca6174_arm64"
>
> do_install() {
> install -d ${D}${sbindir}/fcc_tools
> @@ -17,4 +17,4 @@ do_install() {
> }
>
> COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> -COMPATIBLE_HOST_libc-musl = 'null'
> +COMPATIBLE_HOST:libc-musl = 'null'
> diff --git a/recipes-bsp/formfactor/formfactor_%.bbappend b/recipes-bsp/formfactor/formfactor_%.bbappend
> index 15f8f4e8c2d4..83cce1310fbb 100644
> --- a/recipes-bsp/formfactor/formfactor_%.bbappend
> +++ b/recipes-bsp/formfactor/formfactor_%.bbappend
> @@ -1,2 +1,2 @@
> # Append path for i.MX custom matchconfig
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> diff --git a/recipes-bsp/imx-atf/imx-atf_2.4.bb b/recipes-bsp/imx-atf/imx-atf_2.4.bb
> index f4db002be302..536a0a737cab 100644
> --- a/recipes-bsp/imx-atf/imx-atf_2.4.bb
> +++ b/recipes-bsp/imx-atf/imx-atf_2.4.bb
> @@ -27,7 +27,7 @@ EXTRA_OEMAKE += " \
>
> BUILD_OPTEE = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'true', 'false', d)}"
>
> -CFLAGS_remove_mx8mq = "-O2"
> +CFLAGS:remove:mx8mq = "-O2"
>
> do_compile() {
> # Clear LDFLAGS to avoid the option -Wl recognize issue
> diff --git a/recipes-bsp/imx-lib/imx-lib_git.bb b/recipes-bsp/imx-lib/imx-lib_git.bb
> index c56190702be9..a296b185da94 100644
> --- a/recipes-bsp/imx-lib/imx-lib_git.bb
> +++ b/recipes-bsp/imx-lib/imx-lib_git.bb
> @@ -20,15 +20,15 @@ S = "${WORKDIR}/git"
>
> inherit use-imx-headers
>
> -PLATFORM_mx6q = "IMX6Q"
> -PLATFORM_mx6dl = "IMX6Q"
> -PLATFORM_mx6sl = "IMX6S"
> -PLATFORM_mx6sll = "IMX6UL"
> -PLATFORM_mx6sx = "IMX6S"
> -PLATFORM_mx6ul = "IMX6UL"
> -PLATFORM_mx6ull = "IMX6UL"
> -PLATFORM_mx7d = "IMX7"
> -PLATFORM_mx7ulp = "IMX7"
> +PLATFORM:mx6q = "IMX6Q"
> +PLATFORM:mx6dl = "IMX6Q"
> +PLATFORM:mx6sl = "IMX6S"
> +PLATFORM:mx6sll = "IMX6UL"
> +PLATFORM:mx6sx = "IMX6S"
> +PLATFORM:mx6ul = "IMX6UL"
> +PLATFORM:mx6ull = "IMX6UL"
> +PLATFORM:mx7d = "IMX7"
> +PLATFORM:mx7ulp = "IMX7"
>
> PARALLEL_MAKE="-j 1"
> EXTRA_OEMAKE = ""
> diff --git a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb b/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> index 422670bed322..484db354a75b 100644
> --- a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> +++ b/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> @@ -10,8 +10,8 @@ SECTION = "BSP"
> inherit use-imx-security-controller-firmware
>
> IMX_EXTRA_FIRMWARE = "firmware-imx-8 imx-sc-firmware imx-seco"
> -IMX_EXTRA_FIRMWARE_mx8m = "firmware-imx-8m"
> -IMX_EXTRA_FIRMWARE_mx8x = "imx-sc-firmware imx-seco"
> +IMX_EXTRA_FIRMWARE:mx8m = "firmware-imx-8m"
> +IMX_EXTRA_FIRMWARE:mx8x = "imx-sc-firmware imx-seco"
> DEPENDS += " \
> u-boot \
> ${IMX_EXTRA_FIRMWARE} \
> @@ -20,7 +20,7 @@ DEPENDS += " \
> "
> # xxd is a dependency of fspi_packer.sh
> DEPENDS += "xxd-native"
> -DEPENDS_append_mx8m = " u-boot-mkimage-native dtc-native"
> +DEPENDS:append:mx8m = " u-boot-mkimage-native dtc-native"
> BOOT_NAME = "imx-boot"
> PROVIDES = "${BOOT_NAME}"
>
> @@ -41,7 +41,7 @@ do_compile[depends] += " \
> SC_FIRMWARE_NAME ?= "scfw_tcm.bin"
>
> ATF_MACHINE_NAME ?= "bl31-${ATF_PLATFORM}.bin"
> -ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
> +ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES', 'optee', '-optee', '', d)}"
>
> UBOOT_NAME = "u-boot-${MACHINE}.bin-${UBOOT_CONFIG}"
> BOOT_CONFIG_MACHINE = "${BOOT_NAME}-${MACHINE}-${UBOOT_CONFIG}.bin"
> @@ -58,20 +58,20 @@ IMXBOOT_TARGETS ?= \
> 'flash_multi_cores flash_dcd', d), d)}"
>
> BOOT_STAGING = "${S}/${IMX_BOOT_SOC_TARGET}"
> -BOOT_STAGING_mx8m = "${S}/iMX8M"
> -BOOT_STAGING_mx8dx = "${S}/iMX8QX"
> +BOOT_STAGING:mx8m = "${S}/iMX8M"
> +BOOT_STAGING:mx8dx = "${S}/iMX8QX"
>
> SOC_FAMILY = "INVALID"
> -SOC_FAMILY_mx8 = "mx8"
> -SOC_FAMILY_mx8m = "mx8m"
> -SOC_FAMILY_mx8x = "mx8x"
> +SOC_FAMILY:mx8 = "mx8"
> +SOC_FAMILY:mx8m = "mx8m"
> +SOC_FAMILY:mx8x = "mx8x"
>
> REV_OPTION ?= ""
> -REV_OPTION_mx8qxp = \
> +REV_OPTION:mx8qxp = \
> "${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', '', \
> 'REV=C0', d)}"
>
> -compile_mx8m() {
> +compile:mx8m() {
> bbnote 8MQ/8MM/8MN/8MP boot binary build
> for ddr_firmware in ${DDR_FIRMWARE_NAME}; do
> bbnote "Copy ddr_firmware: ${ddr_firmware} from ${DEPLOY_DIR_IMAGE} -> ${BOOT_STAGING} "
> @@ -88,7 +88,7 @@ compile_mx8m() {
> cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME} ${BOOT_STAGING}/bl31.bin
> cp ${DEPLOY_DIR_IMAGE}/${UBOOT_NAME} ${BOOT_STAGING}/u-boot.bin
> }
> -compile_mx8() {
> +compile:mx8() {
> bbnote 8QM boot binary build
> cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME} ${BOOT_STAGING}/scfw_tcm.bin
> cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME} ${BOOT_STAGING}/bl31.bin
> @@ -100,7 +100,7 @@ compile_mx8() {
> fi
> }
>
> -compile_mx8x() {
> +compile:mx8x() {
> bbnote 8QX boot binary build
> cp ${DEPLOY_DIR_IMAGE}/${SECO_FIRMWARE_NAME} ${BOOT_STAGING}
> cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME} ${BOOT_STAGING}/scfw_tcm.bin
> @@ -140,7 +140,7 @@ do_install () {
> done
> }
>
> -deploy_mx8m() {
> +deploy:mx8m() {
> install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> install -m 0644 ${DEPLOY_DIR_IMAGE}/u-boot-spl.bin-${MACHINE}-${UBOOT_CONFIG} \
> ${DEPLOYDIR}/${BOOT_TOOLS}
> @@ -153,7 +153,7 @@ deploy_mx8m() {
> install -m 0755 ${BOOT_STAGING}/mkimage_fit_atf.sh ${DEPLOYDIR}/${BOOT_TOOLS}
> install -m 0755 ${BOOT_STAGING}/mkimage_uboot ${DEPLOYDIR}/${BOOT_TOOLS}
> }
> -deploy_mx8() {
> +deploy:mx8() {
> install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
> install -m 0755 ${S}/${TOOLS_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
> @@ -162,7 +162,7 @@ deploy_mx8() {
> ${DEPLOYDIR}/${BOOT_TOOLS}
> fi
> }
> -deploy_mx8x() {
> +deploy:mx8x() {
> install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
> install -m 0755 ${S}/${TOOLS_NAME} ${DEPLOYDIR}/${BOOT_TOOLS}
> diff --git a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb b/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> index f9943342962e..90e3ebf13ce7 100644
> --- a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> +++ b/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> @@ -16,12 +16,12 @@ do_compile () {
> cd ${S}
> oe_runmake clean
> oe_runmake bin
> - oe_runmake -C iMX8M -f soc.mak mkimage_imx8
> + oe_runmake -C iMX8M -f soc.mak mkimage:imx8
> }
>
> do_install () {
> cd ${S}
> install -d ${D}${bindir}
> - install -m 0755 iMX8M/mkimage_imx8 ${D}${bindir}/mkimage_imx8m
> - install -m 0755 mkimage_imx8 ${D}${bindir}/mkimage_imx8
> + install -m 0755 iMX8M/mkimage:imx8 ${D}${bindir}/mkimage_imx8m
> + install -m 0755 mkimage:imx8 ${D}${bindir}/mkimage_imx8
> }
> diff --git a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> index b8c3d3c3cf4f..6eb65b811aa2 100644
> --- a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> +++ b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> @@ -15,10 +15,10 @@ SRC_URI[sha256sum] = "df0fe17c93e4c2835542d6b1b2557524f034e378b643100cd838225e82
>
> BOARD_TYPE ?= "mek"
> SC_FIRMWARE_NAME ?= "INVALID"
> -SC_FIRMWARE_NAME_mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
> -SC_FIRMWARE_NAME_mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
> -SC_FIRMWARE_NAME_mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
> -SC_FIRMWARE_NAME_mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
> +SC_FIRMWARE_NAME:mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
> +SC_FIRMWARE_NAME:mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
> +SC_FIRMWARE_NAME:mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
> +SC_FIRMWARE_NAME:mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
>
> symlink_name = "scfw_tcm.bin"
>
> diff --git a/recipes-bsp/imx-test/imx-test_git.bb b/recipes-bsp/imx-test/imx-test_git.bb
> index 118590d5a93b..ad072c5f4d71 100644
> --- a/recipes-bsp/imx-test/imx-test_git.bb
> +++ b/recipes-bsp/imx-test/imx-test_git.bb
> @@ -9,9 +9,9 @@ LICENSE = "GPLv2+"
> LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/GPL-2.0-or-later;md5=fed54355545ffd980b814dab4a3b312c"
>
> DEPENDS = "alsa-lib libdrm"
> -DEPENDS_append_mx6 = " imx-lib"
> -DEPENDS_append_mx7 = " imx-lib"
> -DEPENDS_append_imxvpu = " virtual/imxvpu"
> +DEPENDS:append:mx6 = " imx-lib"
> +DEPENDS:append:mx7 = " imx-lib"
> +DEPENDS:append:imxvpu = " virtual/imxvpu"
>
> PE = "1"
> PV = "7.0+${SRCPV}"
> @@ -29,22 +29,22 @@ inherit module-base use-imx-headers
> INHIBIT_PACKAGE_STRIP = "1"
> INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
>
> -PLATFORM_mx6q = "IMX6Q"
> -PLATFORM_mx6dl = "IMX6Q"
> -PLATFORM_mx6sl = "IMX6SL"
> -PLATFORM_mx6sll = "IMX6SL"
> -PLATFORM_mx6sx = "IMX6SX"
> -PLATFORM_mx6ul = "IMX6UL"
> -PLATFORM_mx7d = "IMX7D"
> -PLATFORM_mx7ulp = "IMX7D"
> -PLATFORM_mx8 = "IMX8"
> +PLATFORM:mx6q = "IMX6Q"
> +PLATFORM:mx6dl = "IMX6Q"
> +PLATFORM:mx6sl = "IMX6SL"
> +PLATFORM:mx6sll = "IMX6SL"
> +PLATFORM:mx6sx = "IMX6SX"
> +PLATFORM:mx6ul = "IMX6UL"
> +PLATFORM:mx7d = "IMX7D"
> +PLATFORM:mx7ulp = "IMX7D"
> +PLATFORM:mx8 = "IMX8"
>
> PARALLEL_MAKE = "-j 1"
> EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}"
>
> PACKAGECONFIG = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)}"
> -PACKAGECONFIG_append_imxvpu = " vpu"
> -PACKAGECONFIG_append_mx8m = " swpdm"
> +PACKAGECONFIG:append:imxvpu = " vpu"
> +PACKAGECONFIG:append:mx8m = " swpdm"
>
> PACKAGECONFIG[x11] = ",,libx11 libxdamage libxrender libxrandr"
> PACKAGECONFIG[vpu] = "HAS_VPU=true,HAS_VPU=false,virtual/imxvpu"
> diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> index 88b9ee0ef218..d362fce3b83e 100644
> --- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> +++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> @@ -4,7 +4,7 @@ LICENSE = "MIT"
> LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=cd8bc2a79509c22fc9c1782a151210b1"
>
> DEPENDS = "imx-vpu-hantro"
> -DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
> +DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
>
> SRC_URI = " \
> ${FSL_MIRROR}/${BP}.tar.gz \
> @@ -13,9 +13,9 @@ SRC_URI = " \
> SRC_URI[md5sum] = "65417710ef22214523c37f50f34b6ab2"
> SRC_URI[sha256sum] = "897d174c4c0818f31012d8a60ed51fc83fdfc55fca2d2b0fc24a0db3e9f3b6e8"
>
> -PLATFORM_mx8mm = "IMX8MM"
> -PLATFORM_mx8mq = "IMX8MQ"
> -PLATFORM_mx8mp = "IMX8MP"
> +PLATFORM:mx8mm = "IMX8MM"
> +PLATFORM:mx8mq = "IMX8MQ"
> +PLATFORM:mx8mp = "IMX8MP"
>
> EXTRA_OEMAKE = " \
> CROSS_COMPILE="${HOST_PREFIX}" \
> diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> index 20ac87c747db..d2fc8a1123ac 100644
> --- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> +++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> @@ -14,9 +14,9 @@ inherit fsl-eula-unpack use-imx-headers
>
> PARALLEL_MAKE="-j 1"
>
> -PLATFORM_mx8mm = "IMX8MM"
> -PLATFORM_mx8mq = "IMX8MQ"
> -PLATFORM_mx8mp = "IMX8MP"
> +PLATFORM:mx8mm = "IMX8MM"
> +PLATFORM:mx8mq = "IMX8MQ"
> +PLATFORM:mx8mp = "IMX8MP"
>
> EXTRA_OEMAKE = " \
> CROSS_COMPILE="${HOST_PREFIX}" \
> diff --git a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb b/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> index ad44065ae576..36c3fee3a7a7 100644
> --- a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> +++ b/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> @@ -42,7 +42,7 @@ EXTRA_OECMAKE += " \
> -Wno-dev \
> "
>
> -do_configure_prepend() {
> +do_configure:prepend() {
> export SDKTARGETSYSROOT=${STAGING_DIR_HOST}
> }
>
> diff --git a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> index 726b1e16d84e..e57a4273bd36 100644
> --- a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> +++ b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> @@ -26,15 +26,15 @@ EXTRA_OECONF = "--imx-linux-headers-path=${STAGING_INCDIR_IMX} \
> # libg2d. However, that implementation's g2d_alloc() function
> # is broken, so we cannot use it.
> LIBG2D_PACKAGECONFIG = "g2d"
> -LIBG2D_PACKAGECONFIG_imxdpu = ""
> +LIBG2D_PACKAGECONFIG:imxdpu = ""
>
> PACKAGECONFIG ?= " "
> -PACKAGECONFIG_append_imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
> -PACKAGECONFIG_append_imxipu = " ipu"
> -PACKAGECONFIG_append_imxpxp = " pxp"
> -PACKAGECONFIG_append_mx8m = " ion dwl"
> -PACKAGECONFIG_append_mx8qm = " ion"
> -PACKAGECONFIG_append_mx8qxp = " ion"
> +PACKAGECONFIG:append:imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
> +PACKAGECONFIG:append:imxipu = " ipu"
> +PACKAGECONFIG:append:imxpxp = " pxp"
> +PACKAGECONFIG:append:mx8m = " ion dwl"
> +PACKAGECONFIG:append:mx8qm = " ion"
> +PACKAGECONFIG:append:mx8qxp = " ion"
>
> HANTRO_CONF = "--hantro-headers-path=${STAGING_INCDIR}/hantro_dec --hantro-decoder-version=G2"
>
> diff --git a/recipes-bsp/mc-utils/mc-utils_git.bb b/recipes-bsp/mc-utils/mc-utils_git.bb
> index b3c79b99138e..a2f81fe0dc0a 100644
> --- a/recipes-bsp/mc-utils/mc-utils_git.bb
> +++ b/recipes-bsp/mc-utils/mc-utils_git.bb
> @@ -15,13 +15,13 @@ SRCREV = "8e0b863693fc2ccbc62a62c79b4e3db6da88c16e"
> S = "${WORKDIR}/git"
>
> MC_CFG ?= ""
> -MC_CFG_ls1088a = "ls1088a"
> -MC_CFG_ls2088a = "ls2088a"
> -MC_CFG_lx2160a = "lx2160a"
> -MC_CFG_lx2162aqds = "lx2162aqds"
> +MC_CFG:ls1088a = "ls1088a"
> +MC_CFG:ls2088a = "ls2088a"
> +MC_CFG:lx2160a = "lx2160a"
> +MC_CFG:lx2162aqds = "lx2162aqds"
>
> MC_FLAVOUR ?= "RDB"
> -MC_FLAVOUR_lx2162a = ""
> +MC_FLAVOUR:lx2162a = ""
>
> do_compile () {
> oe_runmake -C config
> diff --git a/recipes-bsp/rcw/rcw_git.bb b/recipes-bsp/rcw/rcw_git.bb
> index 693506157188..637035b2064c 100644
> --- a/recipes-bsp/rcw/rcw_git.bb
> +++ b/recipes-bsp/rcw/rcw_git.bb
> @@ -17,9 +17,9 @@ export PYTHON = "${USRBINPATH}/python3"
> M="${@d.getVar('MACHINE').replace('-64b','').replace('-32b','').replace('-${SITEINFO_ENDIANNESS}','')}"
>
> BOARD_TARGETS="${M}"
> -BOARD_TARGETS_ls2088ardb="${M} ${M}_rev1.1"
> -BOARD_TARGETS_ls1088ardb-pb="ls1088ardb"
> -BOARD_TARGETS_lx2160ardb = "${M} ${M}_rev2"
> +BOARD_TARGETS:ls2088ardb="${M} ${M}_rev1.1"
> +BOARD_TARGETS:ls1088ardb-pb="ls1088ardb"
> +BOARD_TARGETS:lx2160ardb = "${M} ${M}_rev2"
>
> do_compile () {
> oe_runmake BOARDS="${BOARD_TARGETS}" DESTDIR=${D}/boot/rcw/
> diff --git a/recipes-bsp/u-boot/libubootenv_%.bbappend b/recipes-bsp/u-boot/libubootenv_%.bbappend
> index 2633c344739b..619b510e1e1c 100644
> --- a/recipes-bsp/u-boot/libubootenv_%.bbappend
> +++ b/recipes-bsp/u-boot/libubootenv_%.bbappend
> @@ -29,8 +29,8 @@ def fixup_uboot_config_dependency(d):
> # | Signed-off-by: Ming Liu <liu.ming50@gmail.com>
> # | Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
> # `----
> - ubootmachine = d.getVar("UBOOT_MACHINE_pn-%s" % imx_default_bootloader)
> - ubootconfig = (d.getVar("UBOOT_CONFIG_pn-%s" % imx_default_bootloader) or "").split()
> + ubootmachine = d.getVar("UBOOT_MACHINE:pn-%s" % imx_default_bootloader)
> + ubootconfig = (d.getVar("UBOOT_CONFIG:pn-%s" % imx_default_bootloader) or "").split()
>
> d.setVar("UBOOT_CONFIG", ubootconfig)
> d.setVar("UBOOT_MACHINE", ubootmachine)
> diff --git a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> index 7f02746b060f..2e79166b279a 100644
> --- a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> +++ b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> @@ -2,7 +2,7 @@
> # Copyright (C) 2014-2016 Freescale Semiconductor
> # Copyright 2017-2019 NXP
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-fslc:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-fslc:"
>
> require u-boot-fslc_${PV}.bb
> require u-boot-mfgtool.inc
> diff --git a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb b/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> index 4f97c722dd6f..2e7bde3838f9 100644
> --- a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> +++ b/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> @@ -12,7 +12,7 @@ DEPENDS += "bc-native dtc-native python3-setuptools-native"
>
> # Location known to imx-boot component, where U-Boot artifacts
> # should be additionally deployed.
> -# See below note above do_deploy_append_mx8m for the purpose of
> +# See below note above do_deploy:append:mx8m for the purpose of
> # this delopyment location
> BOOT_TOOLS = "imx-boot-tools"
>
> @@ -48,7 +48,7 @@ EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CPPFLAGS}" \
> # starts to use it - below append would not be necessary.
> # Once all mx8m derivatives are migrated to use the 'flash.bin' boot
> # container - this append can be dropped completely.
> -do_deploy_append_mx8m() {
> +do_deploy:append:mx8m() {
> # Deploy the mkimage, u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for mkimage to generate boot binary
> if [ -n "${UBOOT_CONFIG}" ]; then
> for config in ${UBOOT_MACHINE}; do
> diff --git a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> index 2b296c192909..af5028896a34 100644
> --- a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> +++ b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> @@ -2,7 +2,7 @@
> # Copyright (C) 2014-2016 Freescale Semiconductor
> # Copyright 2017-2019 NXP
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-imx:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-imx:"
>
> require u-boot-imx_${PV}.bb
> require u-boot-mfgtool.inc
> diff --git a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb b/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> index 6a279a12533d..bb5809e2a179 100644
> --- a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> +++ b/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> @@ -7,7 +7,7 @@ require u-boot-imx-common_${PV}.inc
>
> PROVIDES += "u-boot"
>
> -do_deploy_append_mx8m() {
> +do_deploy:append:mx8m() {
> # Deploy u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for mkimage to generate boot binary
> if [ -n "${UBOOT_CONFIG}" ]
> then
> diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb b/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> index 57f2780314c8..b6eee1d931a2 100644
> --- a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> +++ b/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> @@ -19,14 +19,14 @@ SRCREV= "f46a944f715f284aff1d42c009680ffe0be4058f"
>
> S = "${WORKDIR}/git"
> B = "${WORKDIR}/build"
> -PV_append = "+fslgit"
> +PV:append = "+fslgit"
> LOCALVERSION = "+fsl"
>
> INHIBIT_DEFAULT_DEPS = "1"
> DEPENDS = "libgcc virtual/${TARGET_PREFIX}gcc bison-native bc-native swig-native python3-native"
> -DEPENDS_append_qoriq-arm64 = " dtc-native"
> -DEPENDS_append_qoriq-arm = " dtc-native"
> -DEPENDS_append_qoriq-ppc = " boot-format-native"
> +DEPENDS:append:qoriq-arm64 = " dtc-native"
> +DEPENDS:append:qoriq-arm = " dtc-native"
> +DEPENDS:append:qoriq-ppc = " boot-format-native"
>
> python () {
> if d.getVar("TCMODE") == "external-fsl":
> @@ -41,8 +41,8 @@ python () {
> sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib32-linux'
> sys_original = d.getVar('TARGET_VENDOR') + '-' + d.getVar('TARGET_OS')
> workdir = d.getVar('WORKDIR')
> - d.setVar('DEPENDS_append', ' lib32-gcc-cross-powerpc lib32-libgcc')
> - d.setVar('PATH_append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
> + d.setVar('DEPENDS:append', ' lib32-gcc-cross-powerpc lib32-libgcc')
> + d.setVar('PATH:append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
> d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir + '/lib32-recipe-sysroot')
> d.setVar("WRAP_TARGET_PREFIX", 'powerpc' + sys_multilib + '-')
> elif "fsl-lsch2-32b:" in arch:
> @@ -51,8 +51,8 @@ python () {
> sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib64-linux'
> sys_original = d.getVar('TARGET_VENDOR') + '-' + d.getVar('TARGET_OS')
> workdir = d.getVar('WORKDIR')
> - d.setVar('DEPENDS_append', ' lib64-gcc-cross-aarch64 lib64-libgcc')
> - d.setVar('PATH_append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
> + d.setVar('DEPENDS:append', ' lib64-gcc-cross-aarch64 lib64-libgcc')
> + d.setVar('PATH:append', ':' + d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
> d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir + '/lib64-recipe-sysroot')
> d.setVar("WRAP_TARGET_PREFIX", 'aarch64' + sys_multilib + '-')
> }
> @@ -66,7 +66,7 @@ EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX} CC="${WRAP_TARGET_PREFIX}gcc
> EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
> EXTRA_OEMAKE += 'STAGING_INCDIR=${STAGING_INCDIR_NATIVE} STAGING_LIBDIR=${STAGING_LIBDIR_NATIVE}'
>
> -do_compile_append_qoriq() {
> +do_compile:append:qoriq() {
> unset i j k
> for config in ${UBOOT_MACHINE}; do
> i=`expr $i + 1`;
> diff --git a/recipes-connectivity/iproute2/iproute2_%.bbappend b/recipes-connectivity/iproute2/iproute2_%.bbappend
> index 4426eca57f1a..0f9b5a87defd 100644
> --- a/recipes-connectivity/iproute2/iproute2_%.bbappend
> +++ b/recipes-connectivity/iproute2/iproute2_%.bbappend
> @@ -1,4 +1,4 @@
> -do_install_append () {
> +do_install:append () {
> install -d ${D}/usr/include/tc
> cp -a ${B}/include ${D}/usr/include
> cp -a ${B}/tc/*.h ${D}/usr/include/tc
> diff --git a/recipes-connectivity/openssl/openssl_%.bbappend b/recipes-connectivity/openssl/openssl_%.bbappend
> index ce4ff276e633..e88de3618243 100644
> --- a/recipes-connectivity/openssl/openssl_%.bbappend
> +++ b/recipes-connectivity/openssl/openssl_%.bbappend
> @@ -1,8 +1,8 @@
> -FILESEXTRAPATHS_append := "${THISDIR}/${PN}-qoriq:"
> +FILESEXTRAPATHS:append := "${THISDIR}/${PN}-qoriq:"
>
> -SRC_URI_append_qoriq = " \
> +SRC_URI:append:qoriq = " \
> file://0001-eng_devcrypto-add-support-for-TLS-algorithms-offload.patch \
> file://0002-eng_devcrypto-add-support-for-TLS1.2-algorithms-offl.patch \
> "
>
> -PACKAGECONFIG_append_qoriq = " cryptodev-linux"
> +PACKAGECONFIG:append:qoriq = " cryptodev-linux"
> diff --git a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> index 000578744ac2..46dfc1245600 100644
> --- a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> +++ b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> @@ -1,2 +1,2 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
>
> diff --git a/recipes-core/udev/udev-rules-qoriq.bb b/recipes-core/udev/udev-rules-qoriq.bb
> index c328f4ccbd97..e39da44ce7f3 100644
> --- a/recipes-core/udev/udev-rules-qoriq.bb
> +++ b/recipes-core/udev/udev-rules-qoriq.bb
> @@ -18,11 +18,11 @@ RULE_t1024 = "72-fsl-dpaa-persistent-networking.rules"
> RULE_qoriq-arm64 = "73-fsl-dpaa-persistent-networking.rules \
> 73-fsl-enetc-networking.rules \
> "
> -RULE_ls1046a = "73-fsl-dpaa-persistent-networking.rules \
> +RULE:ls1046a = "73-fsl-dpaa-persistent-networking.rules \
> 74-ls1046a-xfi2-networking.rules \
> "
> -RULE_ls1012a = ""
> -RULE_ls2080a = ""
> +RULE:ls1012a = ""
> +RULE:ls2080a = ""
>
> do_install () {
> install -d ${D}${sysconfdir}/udev/rules.d/
> diff --git a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb b/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> index dfd7fdcfcd20..fe43a5e1883e 100644
> --- a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> +++ b/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> @@ -32,11 +32,11 @@ python() {
>
> RDEPENDS_${PN}_class-target += "bash"
>
> -EXTRA_OECONF_append_class-target = " --target-list=${@get_qemu_target_list(d)}"
> -EXTRA_OECONF_append_class-target_mipsarcho32 = "${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-capstone', '', d)}"
> -EXTRA_OECONF_append_class-nativesdk = " --target-list=${@get_qemu_target_list(d)}"
> +EXTRA_OECONF:append:class-target = " --target-list=${@get_qemu_target_list(d)}"
> +EXTRA_OECONF:append:class-target_mipsarcho32 = "${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-capstone', '', d)}"
> +EXTRA_OECONF:append:class-nativesdk = " --target-list=${@get_qemu_target_list(d)}"
>
> -do_install_append_class-nativesdk() {
> +do_install:append:class-nativesdk() {
> ${@bb.utils.contains('PACKAGECONFIG', 'gtk+', 'make_qemu_wrapper', '', d)}
> }
>
> diff --git a/recipes-devtools/qemu/qemu.inc b/recipes-devtools/qemu/qemu.inc
> index bf05da9a4c3a..77d067da7ab2 100644
> --- a/recipes-devtools/qemu/qemu.inc
> +++ b/recipes-devtools/qemu/qemu.inc
> @@ -52,7 +52,7 @@ COMPATIBLE_HOST_mipsarchn64 = "null"
> # upstream states qemu doesn't work without optimization
> DEBUG_BUILD = "0"
>
> -do_install_append() {
> +do_install:append() {
> # Prevent QA warnings about installed ${localstatedir}/run
> if [ -d ${D}${localstatedir}/run ]; then rmdir ${D}${localstatedir}/run; fi
> }
> @@ -101,9 +101,9 @@ export LIBTOOL="${HOST_SYS}-libtool"
>
> B = "${WORKDIR}/build"
>
> -EXTRA_OECONF_append = " --python=${HOSTTOOLS_DIR}/python3"
> +EXTRA_OECONF:append = " --python=${HOSTTOOLS_DIR}/python3"
>
> -do_configure_prepend_class-native() {
> +do_configure:prepend:class-native() {
> # Append build host pkg-config paths for native target since the host may provide sdl
> BHOST_PKGCONFIG_PATH=$(PATH=/usr/bin:/bin pkg-config --variable pc_path pkg-config || echo "")
> if [ ! -z "$BHOST_PKGCONFIG_PATH" ]; then
> @@ -127,7 +127,7 @@ do_install () {
> # This will trigger a MMU access fault in the virtual CPU. With this change,
> # the qemu-mips works fine.
> # IMPORTANT: This piece needs to be removed once the root cause is fixed!
> -do_install_append() {
> +do_install:append() {
> if [ -e "${D}/${bindir}/qemu-mips" ]; then
> create_wrapper ${D}/${bindir}/qemu-mips \
> QEMU_RESERVED_VA=0x0
> @@ -147,8 +147,8 @@ make_qemu_wrapper() {
> }
>
> # Disable kvm/virgl/mesa on targets that do not support it
> -PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+"
> -PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+"
> +PACKAGECONFIG:remove:darwin = "kvm virglrenderer glx gtk+"
> +PACKAGECONFIG:remove:mingw32 = "kvm virglrenderer glx gtk+"
>
> PACKAGECONFIG[sdl] = "--enable-sdl,--disable-sdl,libsdl2"
> PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr --enable-cap-ng,--disable-virtfs,libcap-ng attr,"
> diff --git a/recipes-dpaa/fm-ucode/fm-ucode_git.bb b/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> index 39e4f9d0febb..319a56b33568 100644
> --- a/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> +++ b/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> @@ -13,13 +13,13 @@ SRCREV = "c275e91392e2adab1ed22f3867b8269ca3c54014"
> S = "${WORKDIR}/git"
>
> REGLEX ?= "${MACHINE}"
> -REGLEX_t1023 = "t1024"
> -REGLEX_t1040 = "t1040"
> -REGLEX_t1042 = "t1040"
> -REGLEX_b4420 = "b4860"
> -REGLEX_t4160 = "t4240"
> -REGLEX_ls1043a = "ls1043"
> -REGLEX_ls1046a = "ls1046"
> +REGLEX:t1023 = "t1024"
> +REGLEX:t1040 = "t1040"
> +REGLEX:t1042 = "t1040"
> +REGLEX:b4420 = "b4860"
> +REGLEX:t4160 = "t4240"
> +REGLEX:ls1043a = "ls1043"
> +REGLEX:ls1046a = "ls1046"
>
> do_install () {
> UCODE=`echo ${REGLEX} | sed -e 's,-.*$,,' -e 's,[a-zA-Z]*$,,'`
> diff --git a/recipes-dpaa2/aiopsl/aiopsl_git.bb b/recipes-dpaa2/aiopsl/aiopsl_git.bb
> index a1b0028938e5..794d013c5c2b 100644
> --- a/recipes-dpaa2/aiopsl/aiopsl_git.bb
> +++ b/recipes-dpaa2/aiopsl/aiopsl_git.bb
> @@ -13,8 +13,8 @@ SRCREV = "87d83d8e99770325cc7ad9e10965c9959e7cb828"
> do_configure[noexec] = "1"
> do_compile[noexec] = "1"
>
> -DEMOS_PATH_ls2088a = "LS2088A"
> -DEMOS_PATH_ls1088a = "LS1088A"
> +DEMOS_PATH:ls2088a = "LS2088A"
> +DEMOS_PATH:ls1088a = "LS1088A"
>
> do_install () {
> install -d ${D}/usr/aiop/bin
> diff --git a/recipes-dpaa2/management-complex/management-complex_10.14.1.bb b/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> index ddb305c1a36c..69804e9fa68e 100644
> --- a/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> +++ b/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> @@ -11,10 +11,10 @@ SRCREV = "408110ee632f6291545b0b156cd74e7e3b4612cc"
>
> S = "${WORKDIR}/git"
>
> -REGLEX_ls2088a = "ls2088a"
> -REGLEX_ls2080a = "ls2080a"
> -REGLEX_ls1088a = "ls1088a"
> -REGLEX_lx2160a = "lx2160a"
> +REGLEX:ls2088a = "ls2088a"
> +REGLEX:ls2080a = "ls2080a"
> +REGLEX:ls1088a = "ls1088a"
> +REGLEX:lx2160a = "lx2160a"
>
> do_install () {
> install -d ${D}/boot
> diff --git a/recipes-dpaa2/management-complex/management-complex_10.20.4.bb b/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> index 3e14a26eabeb..7e0059703738 100644
> --- a/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> +++ b/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> @@ -11,10 +11,10 @@ SRCREV = "f73683596a7b72124d67b62e64f3dc2bb36b9321"
>
> S = "${WORKDIR}/git"
>
> -REGLEX_ls2088a = "ls2088a"
> -REGLEX_ls2080a = "ls2080a"
> -REGLEX_ls1088a = "ls1088a"
> -REGLEX_lx2160a = "lx2160a"
> +REGLEX:ls2088a = "ls2088a"
> +REGLEX:ls2080a = "ls2080a"
> +REGLEX:ls1088a = "ls1088a"
> +REGLEX:lx2160a = "lx2160a"
>
> do_install () {
> install -d ${D}/boot
> diff --git a/recipes-dpaa2/management-complex/management-complex_10.24.0.bb b/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> index 17049a15e7c8..12c1a4d89dff 100644
> --- a/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> +++ b/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> @@ -11,11 +11,11 @@ SRCREV = "324817697a4c89a9a940fb7dba1b18909913ee20"
>
> S = "${WORKDIR}/git"
>
> -REGLEX_ls2088a = "ls2088a"
> -REGLEX_ls2080a = "ls2080a"
> -REGLEX_ls1088a = "ls1088a"
> -REGLEX_lx2160a = "lx216xa"
> -REGLEX_lx2162a = "lx216xa"
> +REGLEX:ls2088a = "ls2088a"
> +REGLEX:ls2080a = "ls2080a"
> +REGLEX:ls1088a = "ls1088a"
> +REGLEX:lx2160a = "lx216xa"
> +REGLEX:lx2162a = "lx216xa"
>
> do_install () {
> install -d ${D}/boot
> diff --git a/recipes-extended/dpdk/dpdk.inc b/recipes-extended/dpdk/dpdk.inc
> index 61c02ae75f90..2d07187d14fd 100644
> --- a/recipes-extended/dpdk/dpdk.inc
> +++ b/recipes-extended/dpdk/dpdk.inc
> @@ -3,23 +3,23 @@ HOMEPAGE = "http://dpdk.org"
>
> RDEPENDS_${PN} += "python3-core"
> DEPENDS = "virtual/kernel openssl"
> -DEPENDS_append_x86-64 = " numactl"
> +DEPENDS:append:x86-64 = " numactl"
> do_configure[depends] += "virtual/kernel:do_shared_workdir"
>
> inherit module
>
> COMPATIBLE_HOST = '(aarch64|arm|i.86|x86_64).*-linux'
> -COMPATIBLE_HOST_libc-musl = 'null'
> -COMPATIBLE_HOST_armv4 = 'null'
> -COMPATIBLE_HOST_armv5 = 'null'
> -COMPATIBLE_HOST_armv6 = 'null'
> +COMPATIBLE_HOST:libc-musl = 'null'
> +COMPATIBLE_HOST:armv4 = 'null'
> +COMPATIBLE_HOST:armv5 = 'null'
> +COMPATIBLE_HOST:armv6 = 'null'
>
> COMPATIBLE_MACHINE = "(imx|qoriq)"
>
> -DPDK_RTE_TARGET_x86-64 = "x86_64-native-linuxapp-gcc"
> -DPDK_RTE_TARGET_x86 = "i686-native-linuxapp-gcc"
> -DPDK_RTE_TARGET_armv7a = "${ARCH}-armv7a-linuxapp-gcc"
> -DPDK_RTE_TARGET_armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
> +DPDK_RTE_TARGET:x86-64 = "x86_64-native-linuxapp-gcc"
> +DPDK_RTE_TARGET:x86 = "i686-native-linuxapp-gcc"
> +DPDK_RTE_TARGET:armv7a = "${ARCH}-armv7a-linuxapp-gcc"
> +DPDK_RTE_TARGET:armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
> DPDK_RTE_TARGET ?= "${ARCH}-dpaa-linuxapp-gcc"
>
> export RTE_TARGET = "${DPDK_RTE_TARGET}"
> diff --git a/recipes-extended/dpdk/dpdk_19.11-20.12.bb b/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> index 426713c2d1d7..37582124b021 100644
> --- a/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> +++ b/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> @@ -13,7 +13,7 @@ SRCREV = "7071c27f6f5aefb57de1cffab3484707b1e82e2b"
>
> include dpdk.inc
>
> -do_install_append () {
> +do_install:append () {
> # Remove the unneeded dir
> rm -rf ${D}/${datadir}/${RTE_TARGET}/app
> }
> diff --git a/recipes-extended/jailhouse/jailhouse_0.12.bb b/recipes-extended/jailhouse/jailhouse_0.12.bb
> index c49d7f5b194e..a83592d24f1f 100644
> --- a/recipes-extended/jailhouse/jailhouse_0.12.bb
> +++ b/recipes-extended/jailhouse/jailhouse_0.12.bb
> @@ -39,9 +39,9 @@ CELLCONF_DIR ?= "${JH_DATADIR}/configs"
> INMATES_DIR ?= "${JH_DATADIR}/inmates"
>
> JH_CONFIG ?= "${S}/ci/jailhouse-config-x86.h"
> -JH_CONFIG_x86 ?= "${S}/ci/jailhouse-config-x86.h"
> -JH_CONFIG_x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
> -JH_CONFIG_arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
> +JH_CONFIG:x86 ?= "${S}/ci/jailhouse-config-x86.h"
> +JH_CONFIG:x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
> +JH_CONFIG:arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
>
> do_configure() {
> if [ -d ${STAGING_DIR_HOST}/${CELLCONF_DIR} ];
> diff --git a/recipes-extended/odp/odp-counters_git.bb b/recipes-extended/odp/odp-counters_git.bb
> index 860dd5faf450..9d88ea43edee 100644
> --- a/recipes-extended/odp/odp-counters_git.bb
> +++ b/recipes-extended/odp/odp-counters_git.bb
> @@ -2,7 +2,7 @@ require odp.inc
>
> inherit module
>
> -do_compile_prepend () {
> +do_compile:prepend () {
> export KERNEL_PATH="${STAGING_KERNEL_DIR}"
> export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
> cd ${S}/test/debug/perf_counters
> diff --git a/recipes-extended/odp/odp-module_git.bb b/recipes-extended/odp/odp-module_git.bb
> index 46b896547a91..8bcdcd81573d 100644
> --- a/recipes-extended/odp/odp-module_git.bb
> +++ b/recipes-extended/odp/odp-module_git.bb
> @@ -2,7 +2,7 @@ require odp.inc
>
> inherit module
>
> -do_compile_prepend () {
> +do_compile:prepend () {
> export KERNEL_PATH="${STAGING_KERNEL_DIR}"
> export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
> cd ${S}/kern
> diff --git a/recipes-extended/odp/odp.inc b/recipes-extended/odp/odp.inc
> index 129f77ae108b..d1e10b0f94d4 100644
> --- a/recipes-extended/odp/odp.inc
> +++ b/recipes-extended/odp/odp.inc
> @@ -6,7 +6,7 @@ SECTION = "console/network"
> LICENSE = "BSD-3-Clause"
> LIC_FILES_CHKSUM = "file://LICENSE;md5=ca6103dc75397fb6bec596187d6b7829"
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/odp:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/odp:"
>
> SRC_URI = " \
> git://source.codeaurora.org/external/qoriq/qoriq-components/odp;nobranch=1 \
> diff --git a/recipes-extended/odp/odp_git.bb b/recipes-extended/odp/odp_git.bb
> index 00575e24d5a8..bfe251ed6bda 100644
> --- a/recipes-extended/odp/odp_git.bb
> +++ b/recipes-extended/odp/odp_git.bb
> @@ -9,14 +9,14 @@ DEPENDS = "openssl cunit libxml2"
> RDEPENDS_${PN} = "bash libcrypto libssl odp-module odp-counters"
>
> ODP_SOC ?= ""
> -ODP_SOC_ls1043ardb = "LS1043"
> -ODP_SOC_ls1046ardb = "LS1046"
> +ODP_SOC:ls1043ardb = "LS1043"
> +ODP_SOC:ls1046ardb = "LS1046"
> ODP_PLATFORM ?= "linux-dpaa2"
> ODP_BUILD_TYPE ?= "ls2088"
> -ODP_BUILD_TYPE_ls1043ardb = "ls1043"
> -ODP_BUILD_TYPE_ls1046ardb = "ls1046"
> -ODP_BUILD_TYPE_ls2080ardb = "ls2080"
> -ODP_BUILD_TYPE_ls1088ardb = "ls1088"
> +ODP_BUILD_TYPE:ls1043ardb = "ls1043"
> +ODP_BUILD_TYPE:ls1046ardb = "ls1046"
> +ODP_BUILD_TYPE:ls2080ardb = "ls2080"
> +ODP_BUILD_TYPE:ls1088ardb = "ls1088"
>
> EXTRA_OECONF = "--with-platform=${ODP_PLATFORM} \
> --enable-test-vald \
> @@ -34,17 +34,17 @@ CFLAGS += "-Wno-format-truncation -Wno-maybe-uninitialized -Wno-implicit-fallthr
>
> PACKAGECONFIG[perf] = "--enable-test-perf,,,"
>
> -do_configure_prepend () {
> +do_configure:prepend () {
> export SOC=${ODP_SOC}
> ${S}/bootstrap
> }
>
> -do_compile_prepend () {
> +do_compile:prepend () {
> export SOC=${ODP_SOC}
> export ARCH=${TUNE_ARCH}
> }
>
> -do_install_append () {
> +do_install:append () {
> install -d ${D}${includedir}/odp/kni
> install -d ${D}${includedir}/odp/kern
> install -d ${D}${includedir}/odp/flib/mc
> diff --git a/recipes-extended/procps/procps_%.bbappend b/recipes-extended/procps/procps_%.bbappend
> index face0ccc0f61..43fb349b8de2 100644
> --- a/recipes-extended/procps/procps_%.bbappend
> +++ b/recipes-extended/procps/procps_%.bbappend
> @@ -1,4 +1,4 @@
> -do_install_append_qoriq-ppc() {
> +do_install:append:qoriq-ppc() {
> for keyword in \
> net.ipv4.conf.default.rp_filter \
> net.ipv4.conf.all.rp_filter \
> diff --git a/recipes-extended/testfloat/testfloat_2a.bb b/recipes-extended/testfloat/testfloat_2a.bb
> index 800cef3d172e..6777249f39e3 100644
> --- a/recipes-extended/testfloat/testfloat_2a.bb
> +++ b/recipes-extended/testfloat/testfloat_2a.bb
> @@ -6,7 +6,7 @@ LIC_FILES_CHKSUM = "file://testfloat/testfloat.txt;beginline=87;endline=95;md5=b
> SRC_URI = " http://www.jhauser.us/arithmetic/TestFloat-2a.tar.Z;name=TestFloat \
> http://www.jhauser.us/arithmetic/SoftFloat-2b.tar.Z;name=SoftFloat \
> "
> -SRC_URI_append_qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
> +SRC_URI:append:qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
> file://TestFloat-powerpc-E500v2-SPE-1.patch \
> file://Yocto-replace-COMPILE_PREFIX-gcc.patch \
> "
> diff --git a/recipes-extended/tsntool/tsntool_git.bb b/recipes-extended/tsntool/tsntool_git.bb
> index 8ef79d27c8bd..ea452f7c82f3 100644
> --- a/recipes-extended/tsntool/tsntool_git.bb
> +++ b/recipes-extended/tsntool/tsntool_git.bb
> @@ -14,7 +14,7 @@ S = "${WORKDIR}/git"
>
> do_configure[depends] += "virtual/kernel:do_shared_workdir"
>
> -do_compile_prepend() {
> +do_compile:prepend() {
> mkdir -p ${S}/include/linux
> cp -r ${STAGING_KERNEL_DIR}/include/uapi/linux/tsn.h ${S}/include/linux
> }
> diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> index 4ad257ee9364..9229e26683a6 100644
> --- a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> +++ b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> @@ -3,7 +3,7 @@ DESCRIPTION = "Add packages for ISP build"
> inherit packagegroup
>
> ISP_PKGS ?= ""
> -ISP_PKGS_mx8mp = " \
> +ISP_PKGS:mx8mp = " \
> isp-imx \
> basler-camera \
> basler-camera-dev \
> diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> index aeba762386f3..acadd526bc61 100644
> --- a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> +++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> @@ -10,4 +10,4 @@ RDEPENDS_${PN} = " \
> "
>
> COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> -COMPATIBLE_HOST_libc-musl = 'null'
> +COMPATIBLE_HOST:libc-musl = 'null'
> diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> index 43df5a70e670..233e3d00fa92 100644
> --- a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> +++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> @@ -9,4 +9,4 @@ RDEPENDS_${PN} = " \
> firmware-qca9377 \
> "
> COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> -COMPATIBLE_HOST_libc-musl = 'null'
> +COMPATIBLE_HOST:libc-musl = 'null'
> diff --git a/recipes-graphics/cairo/cairo_%.bbappend b/recipes-graphics/cairo/cairo_%.bbappend
> index 5b1562ab8b4d..2c73c7f32f25 100644
> --- a/recipes-graphics/cairo/cairo_%.bbappend
> +++ b/recipes-graphics/cairo/cairo_%.bbappend
> @@ -1,2 +1,2 @@
> -PACKAGECONFIG_append_imxgpu3d = " egl glesv2"
> -PACKAGECONFIG_remove_imxgpu3d = "opengl"
> +PACKAGECONFIG:append:imxgpu3d = " egl glesv2"
> +PACKAGECONFIG:remove:imxgpu3d = "opengl"
> diff --git a/recipes-graphics/drm/libdrm_2.4.102.imx.bb b/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> index 6935b7822b63..371d2e1775d8 100644
> --- a/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> +++ b/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> @@ -64,10 +64,10 @@ FILES_${PN}-etnaviv = "${libdir}/libdrm_etnaviv.so.*"
>
> BBCLASSEXTEND = "native nativesdk"
>
> -PACKAGES_prepend_imxgpu = "${PN}-vivante "
> -RRECOMMENDS_${PN}-drivers_append_imxgpu = " ${PN}-vivante"
> +PACKAGES:prepend:imxgpu = "${PN}-vivante "
> +RRECOMMENDS_${PN}-drivers:append:imxgpu = " ${PN}-vivante"
> FILES_${PN}-vivante = "${libdir}/libdrm_vivante.so.*"
> -PACKAGECONFIG_append_imxgpu = " vivante"
> +PACKAGECONFIG:append:imxgpu = " vivante"
> PACKAGECONFIG[vivante] = "-Dvivante=true,-Dvivante=false"
>
> PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> diff --git a/recipes-graphics/gtk+/gtk+3_%.bbappend b/recipes-graphics/gtk+/gtk+3_%.bbappend
> index be2bac75fbf8..2f108a274b0f 100644
> --- a/recipes-graphics/gtk+/gtk+3_%.bbappend
> +++ b/recipes-graphics/gtk+/gtk+3_%.bbappend
> @@ -1,5 +1,5 @@
> -DEPENDS_append_imxgpu2d = " virtual/egl"
> +DEPENDS:append:imxgpu2d = " virtual/egl"
>
> -PACKAGECONFIG_remove_imxgpu2d = " \
> +PACKAGECONFIG:remove:imxgpu2d = " \
> ${@bb.utils.contains("DISTRO_FEATURES", "wayland", "x11", "", d)} \
> "
> diff --git a/recipes-graphics/images/core-image-weston.bbappend b/recipes-graphics/images/core-image-weston.bbappend
> index 2a3cde69a8cd..77d2fe747801 100644
> --- a/recipes-graphics/images/core-image-weston.bbappend
> +++ b/recipes-graphics/images/core-image-weston.bbappend
> @@ -1,3 +1,3 @@
> # FIXME: i.MX6SL cannot use mesa for Graphics and it lacks GL support,
> # so for now we skip it.
> -CORE_IMAGE_BASE_INSTALL_remove_mx6sl = "clutter-1.0-examples"
> +CORE_IMAGE_BASE_INSTALL:remove:mx6sl = "clutter-1.0-examples"
> diff --git a/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb b/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> index 65ce9cd567b4..d0ac10bdb9a2 100644
> --- a/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> +++ b/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> @@ -11,16 +11,16 @@ S = "${WORKDIR}/git"
>
> inherit cmake pkgconfig perlnative python3native
>
> -PACKAGECONFIG_BACKEND_mx6 = " \
> +PACKAGECONFIG_BACKEND:mx6 = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'waffle', \
> bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', \
> '', d), d)} \
> "
> -PACKAGECONFIG_BACKEND_mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
> -PACKAGECONFIG_BACKEND_mx8 = "waffle"
> +PACKAGECONFIG_BACKEND:mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
> +PACKAGECONFIG_BACKEND:mx8 = "waffle"
>
> PACKAGECONFIG_GPU2D = ""
> -PACKAGECONFIG_GPU2D_imxgpu2d = "vivante"
> +PACKAGECONFIG_GPU2D:imxgpu2d = "vivante"
>
> PACKAGECONFIG ??= " \
> egl \
> diff --git a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> index 91a5542bd7a4..4c732ff2feb0 100644
> --- a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> +++ b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> @@ -17,8 +17,8 @@ DEPENDS += " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'libxcb libxshmfence libxxf86vm', \
> '', d)} \
> "
> -DEPENDS_append_imxdrm = " libdrm wayland"
> -DEPENDS_append_mx8 = " patchelf-native"
> +DEPENDS:append:imxdrm = " libdrm wayland"
> +DEPENDS:append:mx8 = " patchelf-native"
>
> # imx-gpu-viv does not provide everything it needs to for virtual/libgl
> # on x11 backend or on Wayland backend with XWayland support.
> @@ -26,19 +26,19 @@ DEPENDS_append_mx8 = " patchelf-native"
> DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'mesa', '', d)}"
>
> EXTRA_PROVIDES = ""
> -EXTRA_PROVIDES_append_imxgpu3d = " \
> +EXTRA_PROVIDES:append:imxgpu3d = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'virtual/libgl', \
> bb.utils.contains('DISTRO_FEATURES', 'x11', 'virtual/libgl', \
> '', d), d)} \
> virtual/libgles1 \
> virtual/libgles2 \
> "
> -EXTRA_PROVIDES_append_mx8 = " \
> +EXTRA_PROVIDES:append:mx8 = " \
> virtual/libgbm \
> "
> PROVIDES_OPENVX = ""
> -PROVIDES_OPENVX_mx8 = "virtual/libopenvx"
> -PROVIDES_OPENVX_mx8mm = ""
> +PROVIDES_OPENVX:mx8 = "virtual/libopenvx"
> +PROVIDES_OPENVX:mx8mm = ""
> PROVIDES += " \
> imx-gpu-viv \
> libgal-imx \
> @@ -52,13 +52,13 @@ PROVIDES += " \
> ${EXTRA_PROVIDES} \
> "
>
> -RPROVIDES_${PN}_imxgpu3d += "imx-gpu-viv"
> +RPROVIDES_${PN}:imxgpu3d += "imx-gpu-viv"
>
> PE = "1"
>
> inherit fsl-eula-unpack features_check
>
> -REQUIRED_DISTRO_FEATURES_mx8 = "wayland"
> +REQUIRED_DISTRO_FEATURES:mx8 = "wayland"
>
> SRC_URI = "${FSL_MIRROR}/${BPN}-${PV}.bin;fsl-eula=true"
>
> @@ -69,7 +69,7 @@ PACKAGECONFIG[valgrind] = ""
>
> # Note : If you add a package here, to prevent a naming conflict see the python_anonymous() futher below
> IMX_PACKAGES_GBM = ""
> -IMX_PACKAGES_GBM_mx8 = "libgbm-imx libgbm-imx-dev"
> +IMX_PACKAGES_GBM:mx8 = "libgbm-imx libgbm-imx-dev"
> PACKAGES =+ "libclc-imx libclc-imx-dev \
> libgl-imx libgl-imx-dev \
> libgles1-imx libgles1-imx-dev \
> @@ -140,21 +140,21 @@ python __anonymous() {
> }
>
> IS_MX6SL = "0"
> -IS_MX6SL_mx6sl = "1"
> +IS_MX6SL:mx6sl = "1"
>
> IS_MX8 = "0"
> -IS_MX8_mx8 = "1"
> +IS_MX8:mx8 = "1"
>
> PACKAGE_FP_TYPE = "hardfp"
>
> HAS_GBM = "false"
> -HAS_GBM_mx8 = "true"
> +HAS_GBM:mx8 = "true"
>
> GLES3_HEADER_REMOVALS = "gl31.h gl32.h"
> -GLES3_HEADER_REMOVALS_mx8m = "gl32.h"
> -GLES3_HEADER_REMOVALS_mx8mm = "gl31.h gl32.h"
> -GLES3_HEADER_REMOVALS_mx8qxp = ""
> -GLES3_HEADER_REMOVALS_mx8qm = ""
> +GLES3_HEADER_REMOVALS:mx8m = "gl32.h"
> +GLES3_HEADER_REMOVALS:mx8mm = "gl31.h gl32.h"
> +GLES3_HEADER_REMOVALS:mx8qxp = ""
> +GLES3_HEADER_REMOVALS:mx8qm = ""
>
> do_install () {
> install -d ${D}${libdir}
> @@ -291,9 +291,9 @@ INSANE_SKIP_libgal-imx += "build-deps"
>
> FILES_libvsc-imx = "${libdir}/libVSC${SOLIBS}"
>
> -FILES_libgbm-imx_mx8 = "${libdir}/libgbm*${REALSOLIBS} ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
> -FILES_libgbm-imx-dev_mx8 = "${libdir}/pkgconfig/gbm.pc ${includedir}/gbm.h"
> -RDEPENDS_libgbm-imx_append_mx8 = " libdrm"
> +FILES_libgbm-imx:mx8 = "${libdir}/libgbm*${REALSOLIBS} ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
> +FILES_libgbm-imx-dev:mx8 = "${libdir}/pkgconfig/gbm.pc ${includedir}/gbm.h"
> +RDEPENDS_libgbm-imx:append:mx8 = " libdrm"
> INSANE_SKIP_libgbm-imx += "dev-so"
>
> FILES_libvulkan-imx = "${libdir}/libvulkan_VSI${REALSOLIBS} ${libdir}/libSPIRV_viv${SOLIBS}"
> @@ -358,10 +358,10 @@ INSANE_SKIP_libgc-wayland-protocol-imx += "dev-so"
> FILES_libgc-wayland-protocol-imx = "${libdir}/libgc_wayland_protocol${REALSOLIBS} ${libdir}/libgc_wayland_protocol${SOLIBS}"
> FILES_libgc-wayland-protocol-imx-dev = "${libdir}/libgc_wayland_protocol${SOLIBSDEV} ${libdir}/pkgconfig/gc_wayland_protocol.pc"
>
> -FILES_imx-gpu-viv-tools = "${bindir}/gmem_info"
> +FILES:imx-gpu-viv-tools = "${bindir}/gmem_info"
>
> -FILES_imx-gpu-viv-demos = "/opt"
> -INSANE_SKIP_imx-gpu-viv-demos += "rpaths dev-deps"
> +FILES:imx-gpu-viv-demos = "/opt"
> +INSANE_SKIP:imx-gpu-viv-demos += "rpaths dev-deps"
>
> FILES_libnn-imx = "${libdir}/libNN*${SOLIBS} ${libdir}/libnn*${SOLIBS} ${libdir}/libneuralnetworks${SOLIBS}"
> FILES_libnn-imx-dev = "${includedir}/nnrt"
> diff --git a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> index 5b82b3f4639b..71baa53d82ef 100644
> --- a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> +++ b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> @@ -1,5 +1,5 @@
> # Append EGL_CFLAGS to CFLAGS
> -CFLAGS_append_imxgpu = " \
> +CFLAGS:append:imxgpu = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-DEGL_API_FB', d)} \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-DWL_EGL_PLATFORM', '', d)} \
> "
> diff --git a/recipes-graphics/libsdl2/libsdl2_%.bbappend b/recipes-graphics/libsdl2/libsdl2_%.bbappend
> index 303ea63a7cf2..af9c97bb6e97 100644
> --- a/recipes-graphics/libsdl2/libsdl2_%.bbappend
> +++ b/recipes-graphics/libsdl2/libsdl2_%.bbappend
> @@ -1,8 +1,8 @@
> # what vivante driver does libsdl2 mean? Anyway it fails with missing functions as
> # VIVANTE_Create VIVANTE_GLES_GetProcAddress VIVANTE_GLES_UnloadLibrary ...
> -EXTRA_OECONF_append_imxgpu2d = " --disable-video-vivante"
> +EXTRA_OECONF:append:imxgpu2d = " --disable-video-vivante"
>
> -CFLAGS_append_imxgpu = " -DLINUX \
> +CFLAGS:append:imxgpu = " -DLINUX \
> ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-DEGL_API_FB', d)} \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-DWL_EGL_PLATFORM', '', d)} \
> "
> diff --git a/recipes-graphics/mesa/mesa-demos_%.bbappend b/recipes-graphics/mesa/mesa-demos_%.bbappend
> index 301f1b59f125..4b518185119b 100644
> --- a/recipes-graphics/mesa/mesa-demos_%.bbappend
> +++ b/recipes-graphics/mesa/mesa-demos_%.bbappend
> @@ -1,26 +1,26 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
>
> -SRC_URI_append_imxgpu = " file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
> +SRC_URI:append:imxgpu = " file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
> file://fix-clear-build-break.patch \
> file://Add-OpenVG-demos-to-support-wayland.patch"
>
> PACKAGECONFIG_REMOVE_IF_2D_ONLY = ""
> -PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu2d = "gles1 gles2"
> -PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu3d = ""
> +PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu2d = "gles1 gles2"
> +PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu3d = ""
> PACKAGECONFIG_REMOVE_IF_GPU = ""
> -PACKAGECONFIG_REMOVE_IF_GPU_imxgpu = " \
> +PACKAGECONFIG_REMOVE_IF_GPU:imxgpu = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'glu x11', '', d)} \
> "
> -PACKAGECONFIG_remove = " \
> +PACKAGECONFIG:remove = " \
> ${PACKAGECONFIG_REMOVE_IF_2D_ONLY} \
> ${PACKAGECONFIG_REMOVE_IF_GPU} \
> "
>
> PACKAGECONFIG_APPEND_IF_GPU = ""
> -PACKAGECONFIG_APPEND_IF_GPU_imxgpu = " \
> +PACKAGECONFIG_APPEND_IF_GPU:imxgpu = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland vg', '', d)} \
> ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glut', '', d)} \
> "
> -PACKAGECONFIG_append = " \
> +PACKAGECONFIG:append = " \
> ${PACKAGECONFIG_APPEND_IF_GPU} \
> "
> diff --git a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb b/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> index 2a32c448f436..c58c2cf30dc9 100644
> --- a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> +++ b/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> @@ -12,7 +12,7 @@ SRC_URI = "\
> do_configure[noexec] = "1"
> do_compile[noexec] = "1"
>
> -do_install_use-mainline-bsp() {
> +do_install:use-mainline-bsp() {
> # MESA global envirronment variables
>
> # systemd
> diff --git a/recipes-graphics/mesa/mesa-gl_%.bbappend b/recipes-graphics/mesa/mesa-gl_%.bbappend
> index ca1c8f46d680..dafd27f0a68e 100644
> --- a/recipes-graphics/mesa/mesa-gl_%.bbappend
> +++ b/recipes-graphics/mesa/mesa-gl_%.bbappend
> @@ -1 +1 @@
> -COMPATIBLE_MACHINE_imxgpu = "(-)"
> +COMPATIBLE_MACHINE:imxgpu = "(-)"
> diff --git a/recipes-graphics/mesa/mesa_%.bbappend b/recipes-graphics/mesa/mesa_%.bbappend
> index 423ee63ec638..d0b55cacea4b 100644
> --- a/recipes-graphics/mesa/mesa_%.bbappend
> +++ b/recipes-graphics/mesa/mesa_%.bbappend
> @@ -1,5 +1,5 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> -SRC_URI_append_use-mainline-bsp = " \
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> +SRC_URI:append:use-mainline-bsp = " \
> file://0001-dri-add-createImageWithModifiers2-interface.patch \
> file://0002-dri-add-loader_dri_create_image-helper.patch \
> file://0003-loader-dri3-convert-to-loader_dri_create_image.patch \
> @@ -11,11 +11,11 @@ SRC_URI_append_use-mainline-bsp = " \
> file://0009-etnaviv-flush-used-render-buffers-on-context-flush-w.patch \
> "
>
> -PROVIDES_remove_imxgpu = "virtual/egl"
> -PROVIDES_remove_imxgpu3d = "virtual/libgl virtual/libgles1 virtual/libgles2"
> +PROVIDES:remove:imxgpu = "virtual/egl"
> +PROVIDES:remove:imxgpu3d = "virtual/libgl virtual/libgles1 virtual/libgles2"
>
> -PACKAGECONFIG_remove_imxgpu = "egl gbm"
> -PACKAGECONFIG_remove_imxgpu3d = "gles"
> +PACKAGECONFIG:remove:imxgpu = "egl gbm"
> +PACKAGECONFIG:remove:imxgpu3d = "gles"
>
> # FIXME: mesa should support 'x11-no-tls' option
> python () {
> @@ -28,13 +28,13 @@ python () {
> }
>
> # Enable Etnaviv and Freedreno support
> -PACKAGECONFIG_append_use-mainline-bsp = " gallium etnaviv kmsro freedreno"
> +PACKAGECONFIG:append:use-mainline-bsp = " gallium etnaviv kmsro freedreno"
>
> # For NXP BSP, GPU drivers don't support dri
> -PACKAGECONFIG_remove_imxgpu_use-nxp-bsp = "dri"
> +PACKAGECONFIG:remove:imxgpu:use-nxp-bsp = "dri"
>
> # mainline/etnaviv:
> -RRECOMMENDS_${PN}-megadriver_append_use-mainline-bsp = " libdrm-etnaviv mesa-etnaviv-env"
> +RRECOMMENDS_${PN}-megadriver:append:use-mainline-bsp = " libdrm-etnaviv mesa-etnaviv-env"
>
> BACKEND = \
> "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', \
> @@ -42,7 +42,7 @@ BACKEND = \
> 'fb', d), d)}"
>
> # FIXME: Dirty hack to allow use of Vivante GPU libGL binary
> -do_install_append_imxgpu3d () {
> +do_install:append:imxgpu3d () {
> rm -f ${D}${libdir}/libGL.* \
> ${D}${includedir}/GL/gl.h \
> ${D}${includedir}/GL/glcorearb.h \
> @@ -54,6 +54,6 @@ do_install_append_imxgpu3d () {
> fi
> }
>
> -do_install_append_imxgpu () {
> +do_install:append:imxgpu () {
> rm -rf ${D}${includedir}/KHR
> }
> diff --git a/recipes-graphics/vulkan/vulkan-loader_%.bbappend b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> index 28e1dc32fcce..1e4d181ce3e5 100644
> --- a/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> +++ b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> @@ -1,3 +1,3 @@
> # The i.MX implementation is dynamically loaded, so it requires an
> # explicit runtime dependency.
> -RRECOMMENDS_${PN}_append_imxgpu = " libvulkan-imx"
> +RRECOMMENDS_${PN}:append:imxgpu = " libvulkan-imx"
> diff --git a/recipes-graphics/waffle/waffle_%.bbappend b/recipes-graphics/waffle/waffle_%.bbappend
> index 9d090bcfe2b0..380273a8c55c 100644
> --- a/recipes-graphics/waffle/waffle_%.bbappend
> +++ b/recipes-graphics/waffle/waffle_%.bbappend
> @@ -1,4 +1,4 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
>
> SRC_URI += " \
> file://0001-meson-Add-missing-wayland-dependency-on-EGL.patch \
> @@ -6,11 +6,11 @@ SRC_URI += " \
> "
>
> PACKAGECONFIG_IMXGPU_X11 = ""
> -PACKAGECONFIG_IMXGPU_X11_imxgpu3d = "x11-egl glx"
> +PACKAGECONFIG_IMXGPU_X11:imxgpu3d = "x11-egl glx"
> PACKAGECONFIG_IMXGPU_GBM = "gbm"
> -PACKAGECONFIG_IMXGPU_GBM_mx6 = ""
> -PACKAGECONFIG_IMXGPU_GBM_mx7 = ""
> -PACKAGECONFIG_imxgpu = " \
> +PACKAGECONFIG_IMXGPU_GBM:mx6 = ""
> +PACKAGECONFIG_IMXGPU_GBM:mx7 = ""
> +PACKAGECONFIG:imxgpu = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', \
> bb.utils.contains('DISTRO_FEATURES', 'x11', '${PACKAGECONFIG_IMXGPU_X11}', \
> '', d), d)} \
> diff --git a/recipes-graphics/wayland/weston-init.bbappend b/recipes-graphics/wayland/weston-init.bbappend
> index ebd982687b19..5710e9b5ecad 100644
> --- a/recipes-graphics/wayland/weston-init.bbappend
> +++ b/recipes-graphics/wayland/weston-init.bbappend
> @@ -1,24 +1,24 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
>
> # OpenGL is not required for parts with GPU support for 2D but not 3D
> IMX_REQUIRED_DISTRO_FEATURES_REMOVE = ""
> -IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu2d = "opengl"
> -IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu3d = ""
> -REQUIRED_DISTRO_FEATURES_remove = "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
> +IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu2d = "opengl"
> +IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu3d = ""
> +REQUIRED_DISTRO_FEATURES:remove = "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
>
> -SRC_URI_append_mx6sl = " file://weston.config"
> +SRC_URI:append:mx6sl = " file://weston.config"
>
> # To customize weston.ini, start by setting the desired assignment in weston.ini,
> # commented out. For example:
> # #xwayland=true
> # Then add the assignment to INI_UNCOMMENT_ASSIGNMENTS.
> -INI_UNCOMMENT_ASSIGNMENTS_append_imx = " \
> +INI_UNCOMMENT_ASSIGNMENTS:append:imx = " \
> ${@bb.utils.contains('DISTRO_FEATURES', 'x11 wayland', 'xwayland=true', '', d)} \
> "
> -INI_UNCOMMENT_ASSIGNMENTS_append_mx8 = " \
> +INI_UNCOMMENT_ASSIGNMENTS:append:mx8 = " \
> repaint-window=16 \
> "
> -INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
> +INI_UNCOMMENT_ASSIGNMENTS:append:mx8mq = " \
> gbm-format=argb8888 \
> \\[shell\\] \
> size=1920x1080 \
> @@ -27,10 +27,10 @@ INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
> # FIXME: The 8QM and 8QXP SoCs have better performance without G2D so don't enable it
> # Ideally, this should be seamless and Vivante ought to handle it internally and take the fastest
> # rendering code.
> -INI_UNCOMMENT_USE_G2D_imxgpu2d ?= "use-g2d=1"
> -INI_UNCOMMENT_USE_G2D_mx8qm = ""
> -INI_UNCOMMENT_USE_G2D_mx8qxp = ""
> -INI_UNCOMMENT_ASSIGNMENTS_append_imxgpu2d = " \
> +INI_UNCOMMENT_USE_G2D:imxgpu2d ?= "use-g2d=1"
> +INI_UNCOMMENT_USE_G2D:mx8qm = ""
> +INI_UNCOMMENT_USE_G2D:mx8qxp = ""
> +INI_UNCOMMENT_ASSIGNMENTS:append:imxgpu2d = " \
> ${INI_UNCOMMENT_USE_G2D} \
> "
>
> @@ -41,7 +41,7 @@ uncomment() {
> sed -i -e 's,^#'"$1"','"$1"',g' $2
> }
>
> -do_install_append() {
> +do_install:append() {
> if [ -f "${WORKDIR}/weston.config" ]; then
> install -Dm0755 ${WORKDIR}/weston.config ${D}${sysconfdir}/default/weston
> fi
> diff --git a/recipes-graphics/wayland/weston_9.0.0.imx.bb b/recipes-graphics/wayland/weston_9.0.0.imx.bb
> index 026f27cebe8b..16607a93c4d2 100644
> --- a/recipes-graphics/wayland/weston_9.0.0.imx.bb
> +++ b/recipes-graphics/wayland/weston_9.0.0.imx.bb
> @@ -20,7 +20,7 @@ SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
> file://0001-tests-include-fcntl.h-for-open-O_RDWR-O_CLOEXEC-and-.patch \
> "
>
> -SRC_URI_append_libc-musl = " file://dont-use-plane-add-prop.patch "
> +SRC_URI:append:libc-musl = " file://dont-use-plane-add-prop.patch "
>
> SRC_URI[sha256sum] = "5cf5d6ce192e0eb15c1fc861a436bf21b5bb3b91dbdabbdebe83e1f83aa098fe"
>
> @@ -97,7 +97,7 @@ PACKAGECONFIG[shell-ivi] = "-Dshell-ivi=true,-Dshell-ivi=false"
> # JPEG image loading support
> PACKAGECONFIG[image-jpeg] = "-Dimage-jpeg=true,-Dimage-jpeg=false, jpeg"
>
> -do_install_append() {
> +do_install:append() {
> # Weston doesn't need the .la files to load modules, so wipe them
> rm -f ${D}/${libdir}/libweston-${WESTON_MAJOR_VERSION}/*.la
>
> @@ -160,23 +160,23 @@ S = "${WORKDIR}/git"
>
> # Disable OpenGL for parts with GPU support for 2D but not 3D
> REQUIRED_DISTRO_FEATURES = "opengl"
> -REQUIRED_DISTRO_FEATURES_imxgpu2d = ""
> -REQUIRED_DISTRO_FEATURES_imxgpu3d = "opengl"
> +REQUIRED_DISTRO_FEATURES:imxgpu2d = ""
> +REQUIRED_DISTRO_FEATURES:imxgpu3d = "opengl"
> PACKAGECONFIG_OPENGL = "opengl"
> -PACKAGECONFIG_OPENGL_imxgpu2d = ""
> -PACKAGECONFIG_OPENGL_imxgpu3d = "opengl"
> +PACKAGECONFIG_OPENGL:imxgpu2d = ""
> +PACKAGECONFIG_OPENGL:imxgpu3d = "opengl"
>
> -PACKAGECONFIG_remove = "wayland x11"
> -PACKAGECONFIG_append = " ${@bb.utils.filter('DISTRO_FEATURES', '${PACKAGECONFIG_OPENGL}', d)}"
> +PACKAGECONFIG:remove = "wayland x11"
> +PACKAGECONFIG:append = " ${@bb.utils.filter('DISTRO_FEATURES', '${PACKAGECONFIG_OPENGL}', d)}"
>
> -PACKAGECONFIG_remove_imxfbdev = "kms"
> -PACKAGECONFIG_append_imxfbdev = " fbdev clients"
> -PACKAGECONFIG_append_imxgpu = " imxgpu"
> -PACKAGECONFIG_append_imxgpu2d = " imxg2d"
> +PACKAGECONFIG:remove:imxfbdev = "kms"
> +PACKAGECONFIG:append:imxfbdev = " fbdev clients"
> +PACKAGECONFIG:append:imxgpu = " imxgpu"
> +PACKAGECONFIG:append:imxgpu2d = " imxg2d"
>
> # Clients support
> SIMPLE_CLIENTS = "all"
> -SIMPLE_CLIENTS_imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
> +SIMPLE_CLIENTS:imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
> PACKAGECONFIG[xwayland] = "-Dxwayland=true,-Dxwayland=false,libxcursor"
> PACKAGECONFIG[clients] = "-Dsimple-clients=${SIMPLE_CLIENTS} -Ddemo-clients=true,-Dsimple-clients= -Ddemo-clients=false"
> # Weston with i.MX GPU support
> diff --git a/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend b/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> index a9c60f3ec4f9..d112b274a75d 100644
> --- a/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> +++ b/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> @@ -1,2 +1,2 @@
> # Append path for freescale layer to include bsp pointercal.xinput
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> diff --git a/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb b/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb
> index 069008c04479..836a16ba08cc 100644
> --- a/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb
> +++ b/recipes-graphics/xorg-driver/xf86-video-imx-vivante_6.4.0.p0.0.bb
> @@ -34,7 +34,7 @@ TARGET_CC_ARCH += "${LDFLAGS}"
>
> PACKAGES =+ "xserver-xorg-extension-viv-autohdmi"
>
> -do_install_append () {
> +do_install:append () {
> install -d ${D}${includedir}
> cp -axr ${S}/EXA/src/vivante_gal/vivante_priv.h ${D}${includedir}
> cp -axr ${S}/EXA/src/vivante_gal/vivante_gal.h ${D}${includedir}
> diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend b/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> index ceb438e37115..3fe677b34770 100644
> --- a/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> +++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> @@ -1,2 +1,2 @@
> # Append path for freescale layer to include bsp xorg.conf
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> diff --git a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> index 22d950c796cc..34e2ed82377b 100644
> --- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> +++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> @@ -1,7 +1,7 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
>
> -SRC_URI_append_use-mainline-bsp = " file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
> -SRC_URI_append_imxgpu = " \
> +SRC_URI:append:use-mainline-bsp = " file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
> +SRC_URI:append:imxgpu = " \
> file://0003-Remove-check-for-useSIGIO-option.patch \
> file://0001-MGS-5186-Per-Specification-EGL_NATIVE_PIXMAP_KHR-req.patch \
> file://0001-glamor-glamor_egl.c-EGL_NATIVE_PIXMAP_KHR-do-not-req.patch \
> @@ -10,7 +10,7 @@ SRC_URI_append_imxgpu = " \
> "
>
> IMX_OPENGL_PKGCONFIGS_REMOVE = ""
> -IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
> -OPENGL_PKGCONFIGS_remove_mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> -OPENGL_PKGCONFIGS_remove_mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> -OPENGL_PKGCONFIGS_remove_imxdrm = "dri glx"
> +IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
> +OPENGL_PKGCONFIGS:remove:mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> +OPENGL_PKGCONFIGS:remove:mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> +OPENGL_PKGCONFIGS:remove:imxdrm = "dri glx"
> diff --git a/recipes-graphics/xwayland/xwayland_%.bbappend b/recipes-graphics/xwayland/xwayland_%.bbappend
> index c26bb20d2caf..b3e79e09182f 100644
> --- a/recipes-graphics/xwayland/xwayland_%.bbappend
> +++ b/recipes-graphics/xwayland/xwayland_%.bbappend
> @@ -1,4 +1,4 @@
> IMX_OPENGL_PKGCONFIGS_REMOVE = ""
> -IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
> -OPENGL_PKGCONFIGS_remove_mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> -OPENGL_PKGCONFIGS_remove_mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> +IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
> +OPENGL_PKGCONFIGS:remove:mx6 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> +OPENGL_PKGCONFIGS:remove:mx7 = "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> diff --git a/recipes-kernel/ceetm/ceetm_git.bb b/recipes-kernel/ceetm/ceetm_git.bb
> index 2e92ad49e5a4..45c3f19edc1a 100644
> --- a/recipes-kernel/ceetm/ceetm_git.bb
> +++ b/recipes-kernel/ceetm/ceetm_git.bb
> @@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=bac620b9883d38a84dfb73ca7122d915"
>
> SRC_URI = "git://source.codeaurora.org/external/qoriq/qoriq-components/ceetm;nobranch=1"
> SRCREV = "6a7f2ec2091df2f4380cb8d25a36c399aed5af1b"
> -SRC_URI_append = " file://0001-Makefile-update-CFLAGS.patch \
> +SRC_URI:append = " file://0001-Makefile-update-CFLAGS.patch \
> file://0001-use-new-api-tc_print_rate.patch \
> "
> DEPENDS = "iproute2"
> diff --git a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> index feddc8faac80..36e2065db7c4 100644
> --- a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> +++ b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> @@ -14,7 +14,7 @@ export KERNEL_PATH
>
> INHIBIT_PACKAGE_STRIP = "1"
>
> -do_compile_prepend() {
> +do_compile:prepend() {
> sed -i -e 's,EXTRA_CFLAGS += -I$(PWD),EXTRA_CFLAGS += -I${S},' ${S}/armodule/source/Makefile
> }
>
> diff --git a/recipes-kernel/kernel-modules/kernel-module-ipc.inc b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> index 350ba186aeb2..903c53a48731 100644
> --- a/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> +++ b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> @@ -11,7 +11,7 @@ SRCREV = "74d662707558290f070f9589177db730444bc435"
> S = "${WORKDIR}/git"
>
> do_configure[depends] += "virtual/kernel:do_shared_workdir"
> -do_compile_prepend () {
> +do_compile:prepend () {
> cd ${S}/kernel
> }
>
> diff --git a/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> index 0b23a47c04bb..a7b8a4e68ce7 100644
> --- a/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> +++ b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> @@ -20,4 +20,4 @@ EXTRA_OEMAKE += " \
> "
>
> COMPATIBLE_MACHINE = "(imx)"
> -COMPATIBLE_HOST_libc-musl = 'null'
> +COMPATIBLE_HOST:libc-musl = 'null'
> diff --git a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> index 63527d1324cc..95dd72fb894c 100644
> --- a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> +++ b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> @@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by the Freescale Community \
> that produces a Manufacturing Tool compatible Linux Kernel to be used in updater \
> environment"
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
> require linux-fslc-lts_${PV}.bb
> require linux-mfgtool.inc
>
> diff --git a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> index c155ebb969ed..09d35c9152ea 100644
> --- a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> +++ b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> @@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by the Freescale Community \
> that produces a Manufacturing Tool compatible Linux Kernel to be used in updater \
> environment"
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
> require linux-fslc_${PV}.bb
> require linux-mfgtool.inc
>
> diff --git a/recipes-kernel/linux/linux-imx-headers_5.10.bb b/recipes-kernel/linux/linux-imx-headers_5.10.bb
> index c656fa557e26..05e8b12c5bfe 100644
> --- a/recipes-kernel/linux/linux-imx-headers_5.10.bb
> +++ b/recipes-kernel/linux/linux-imx-headers_5.10.bb
> @@ -75,4 +75,4 @@ PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> # Restrict this recipe to NXP BSP only, this recipe is not compatible
> # with mainline BSP
> COMPATIBLE_HOST = '(null)'
> -COMPATIBLE_HOST_use-nxp-bsp = '.*'
> +COMPATIBLE_HOST:use-nxp-bsp = '.*'
> diff --git a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> index 0a9f5259ed94..311245b19b6d 100644
> --- a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> +++ b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> @@ -5,7 +5,7 @@ SUMMARY = "Produces a Manufacturing Tool compatible Linux Kernel"
> DESCRIPTION = "Linux Kernel provided and supported by Freescale that produces a \
> Manufacturing Tool compatible Linux Kernel to be used in updater environment"
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-imx:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-imx:"
> require linux-imx_${PV}.bb
> require linux-mfgtool.inc
>
> diff --git a/recipes-kernel/linux/linux-qoriq.inc b/recipes-kernel/linux/linux-qoriq.inc
> index 4d134b476599..2333990fb79c 100644
> --- a/recipes-kernel/linux/linux-qoriq.inc
> +++ b/recipes-kernel/linux/linux-qoriq.inc
> @@ -7,12 +7,12 @@ LICENSE = "GPLv2"
>
> S = "${WORKDIR}/git"
>
> -DEPENDS_append = " libgcc"
> +DEPENDS:append = " libgcc"
> # not put Images into /boot of rootfs, install kernel-image if needed
> RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
>
> -KERNEL_CC_append = " ${TOOLCHAIN_OPTIONS}"
> -KERNEL_LD_append = " ${TOOLCHAIN_OPTIONS}"
> +KERNEL_CC:append = " ${TOOLCHAIN_OPTIONS}"
> +KERNEL_LD:append = " ${TOOLCHAIN_OPTIONS}"
> KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
>
> ZIMAGE_BASE_NAME = "zImage-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}"
> @@ -24,9 +24,9 @@ PV = "${LINUX_VERSION}+git${SRCPV}"
> SCMVERSION ?= "y"
> LOCALVERSION = ""
> DELTA_KERNEL_DEFCONFIG ?= ""
> -DELTA_KERNEL_DEFCONFIG_prepend_qoriq-arm64 = "lsdk.config "
> -DELTA_KERNEL_DEFCONFIG_prepend_fsl-lsch2-32b = "multi_v7_lpae.config multi_v8.config lsdk.config "
> -DELTA_KERNEL_DEFCONFIG_prepend_ls102xa = "multi_v7_lpae.config lsdk.config "
> +DELTA_KERNEL_DEFCONFIG:prepend:qoriq-arm64 = "lsdk.config "
> +DELTA_KERNEL_DEFCONFIG:prepend:fsl-lsch2-32b = "multi_v7_lpae.config multi_v8.config lsdk.config "
> +DELTA_KERNEL_DEFCONFIG:prepend:ls102xa = "multi_v7_lpae.config lsdk.config "
>
> do_merge_delta_config[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot bison-native:do_populate_sysroot"
> do_merge_delta_config[dirs] = "${B}"
> @@ -56,11 +56,11 @@ do_merge_delta_config() {
> addtask merge_delta_config before do_kernel_localversion after do_patch
>
> # The link of dts folder is needed for 32b compile of aarch64 targets(e.g. ls1043ardb-32b)
> -do_compile_prepend_fsl-lsch2-32b() {
> +do_compile:prepend:fsl-lsch2-32b() {
> ln -sfT ${STAGING_KERNEL_DIR}/arch/arm64/boot/dts/freescale ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
> }
>
> -do_install_prepend_fsl-lsch2-32b() {
> +do_install:prepend:fsl-lsch2-32b() {
> rm -f ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
> }
>
> diff --git a/recipes-multimedia/alsa/alsa-lib_%.bbappend b/recipes-multimedia/alsa/alsa-lib_%.bbappend
> index 80c11f33204f..d76c45d1e162 100644
> --- a/recipes-multimedia/alsa/alsa-lib_%.bbappend
> +++ b/recipes-multimedia/alsa/alsa-lib_%.bbappend
> @@ -1,4 +1,4 @@
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
>
> IMX_PATCH = " \
> file://0001-add-conf-for-multichannel-support-in-imx.patch \
> @@ -6,6 +6,6 @@ IMX_PATCH = " \
> file://0005-add-ak4458-conf-for-multichannel-support.patch \
> file://0006-add-conf-for-iMX-XCVR-sound-card.patch \
> "
> -SRC_URI_append_imx = "${IMX_PATCH}"
> +SRC_URI:append:imx = "${IMX_PATCH}"
>
> -PACKAGE_ARCH_imx = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:imx = "${MACHINE_SOCARCH}"
> diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> index 3f1ec99d9560..cf640e13779e 100644
> --- a/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> +++ b/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> @@ -50,8 +50,8 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-os=linux \
> --cross-prefix='${HOST_PREFIX}'"
>
> # Disable assembly optimizations for X32, as this libav lacks the support
> -PACKAGECONFIG_remove_linux-gnux32 = "yasm"
> -LIBAV_EXTRA_CONFIGURE_COMMON_ARG_append_linux-gnux32 = " --disable-asm"
> +PACKAGECONFIG:remove:linux-gnux32 = "yasm"
> +LIBAV_EXTRA_CONFIGURE_COMMON_ARG:append:linux-gnux32 = " --disable-asm"
>
> LIBAV_EXTRA_CONFIGURE_COMMON = \
> '${LIBAV_EXTRA_CONFIGURE}="${LIBAV_EXTRA_CONFIGURE_COMMON_ARG}"'
> @@ -63,8 +63,8 @@ FILES_${PN}-dev += "${libdir}/gstreamer-1.0/*.la"
> FILES_${PN}-staticdev += "${libdir}/gstreamer-1.0/*.a"
>
> # http://errors.yoctoproject.org/Errors/Details/20493/
> -ARM_INSTRUCTION_SET_armv4 = "arm"
> -ARM_INSTRUCTION_SET_armv5 = "arm"
> +ARM_INSTRUCTION_SET:armv4 = "arm"
> +ARM_INSTRUCTION_SET:armv5 = "arm"
>
> # ffmpeg/libav disables PIC on some platforms (e.g. x86-32)
> INSANE_SKIP_${PN} = "textrel"
> diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb
> index 6925611ac080..376764583179 100644
> --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb
> +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.16.3.imx.bb
> @@ -1,14 +1,14 @@
> require recipes-multimedia/gstreamer/gstreamer1.0-plugins-common.inc
>
> -DEPENDS_append_imxgpu2d = " virtual/libg2d"
> -DEPENDS_append_mx8 = " libdrm"
> +DEPENDS:append:imxgpu2d = " virtual/libg2d"
> +DEPENDS:append:mx8 = " libdrm"
>
> -PACKAGECONFIG_append_mx8 = " kms"
> +PACKAGECONFIG:append:mx8 = " kms"
>
> DEFAULT_PREFERENCE = "-1"
>
> -PACKAGE_ARCH_imxpxp = "${MACHINE_SOCARCH}"
> -PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:imxpxp = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
>
> GST1.0-PLUGINS-BAD_SRC ?= "gitsm://source.codeaurora.org/external/imx/gst-plugins-bad.git;protocol=https"
> SRCBRANCH = "MM_04.05.07_2011_L5.4.70"
> @@ -37,7 +37,7 @@ DEPENDS += "gstreamer1.0-plugins-base"
> inherit gobject-introspection
>
> PACKAGECONFIG_GL ?= "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gl', '', d)}"
> -PACKAGECONFIG_GL_imxpxp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2', '', d)}"
> +PACKAGECONFIG_GL:imxpxp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2', '', d)}"
>
> PACKAGECONFIG ??= " \
> ${GSTREAMER_ORC} \
> @@ -163,8 +163,8 @@ EXTRA_OEMESON += " \
>
> export OPENCV_PREFIX = "${STAGING_DIR_TARGET}${prefix}"
>
> -ARM_INSTRUCTION_SET_armv4 = "arm"
> -ARM_INSTRUCTION_SET_armv5 = "arm"
> +ARM_INSTRUCTION_SET:armv4 = "arm"
> +ARM_INSTRUCTION_SET:armv5 = "arm"
>
> FILES_${PN}-freeverb += "${datadir}/gstreamer-1.0/presets/GstFreeverb.prs"
> FILES_${PN}-opencv += "${datadir}/gst-plugins-bad/1.0/opencv*"
> diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend
> index d92bdf3ca3c2..1c62f31dc227 100644
> --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend
> +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.%.bbappend
> @@ -1,5 +1,5 @@
> -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
> -PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
> +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
> +PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
>
> # For mainline BSP we need to enable 'gbm' Window system
> -PACKAGECONFIG_GL_use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm', '', d)}"
> +PACKAGECONFIG_GL:use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm', '', d)}"
> diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb
> index db0b740fa22b..01db6125d67d 100644
> --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb
> +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.16.2.imx.bb
> @@ -20,7 +20,7 @@ SRC_URI = "${GST1.0-PLUGINS-BASE_SRC};branch=${SRCBRANCH} \
> S = "${WORKDIR}/git"
>
> DEPENDS += "iso-codes util-linux zlib"
> -DEPENDS_append_imxgpu2d = " virtual/libg2d"
> +DEPENDS:append:imxgpu2d = " virtual/libg2d"
>
> inherit use-imx-headers gobject-introspection gtk-doc
>
> diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend
> index 8565c6a53377..7e72cdaa2273 100644
> --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend
> +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.16.%.bbappend
> @@ -1,3 +1,3 @@
> -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
> -PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
> -PACKAGECONFIG_GL_use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
> +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl x11', 'opengl', '', d)}"
> +PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
> +PACKAGECONFIG_GL:use-mainline-bsp = "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '', d)}"
> diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> index 7c6025dd900e..439c4430f407 100644
> --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> @@ -28,22 +28,22 @@ inherit pkgconfig meson use-imx-headers
> # is needed to improve performance.
> LIBG2D_DPU_OPTION = "-Dg2d-based-on-dpu=false"
> LIBG2D_DEPENDENCIES = "virtual/libg2d"
> -LIBG2D_DPU_OPTION_imxdpu = "-Dg2d-based-on-dpu=true"
> -LIBG2D_DEPENDENCIES_imxdpu = "virtual/libg2d libdrm"
> +LIBG2D_DPU_OPTION:imxdpu = "-Dg2d-based-on-dpu=true"
> +LIBG2D_DEPENDENCIES:imxdpu = "virtual/libg2d libdrm"
>
> EXTRA_OEMESON += "-Dimx-headers-path=${STAGING_INCDIR_IMX}"
>
> PACKAGECONFIG ?= "uniaudiodec"
> -PACKAGECONFIG_append_imxgpu2d = " g2d"
> -PACKAGECONFIG_append_imxvpu = " vpu"
> -PACKAGECONFIG_append_imxipu = " ipu"
> -PACKAGECONFIG_append_imxpxp = " pxp"
> +PACKAGECONFIG:append:imxgpu2d = " g2d"
> +PACKAGECONFIG:append:imxvpu = " vpu"
> +PACKAGECONFIG:append:imxipu = " ipu"
> +PACKAGECONFIG:append:imxpxp = " pxp"
> # The custom imxv4l2 elements are only available on the i.MX6.
> # The 2D blitter sinks require an MXC framebuffer, which
> # is not available anymore on the i.MX8 (since these SoCs
> # now use KMS instead of the old Linux framebuffer).
> -PACKAGECONFIG_append_mx6 = " imx2dvideosink v4l2"
> -PACKAGECONFIG_append_mx7 = " imx2dvideosink"
> +PACKAGECONFIG:append:mx6 = " imx2dvideosink v4l2"
> +PACKAGECONFIG:append:mx7 = " imx2dvideosink"
>
> PACKAGECONFIG[g2d] = "-Dg2d=enabled ${LIBG2D_DPU_OPTION},-Dg2d=disabled,${LIBG2D_DEPENDENCIES}"
> PACKAGECONFIG[pxp] = "-Dpxp=enabled,-Dpxp=disabled,"
> diff --git a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> index c8bb6cd8a45a..9f58aa64d5dc 100644
> --- a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> +++ b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> @@ -8,9 +8,9 @@ LICENSE = "GPLv2 & LGPLv2 & LGPLv2.1"
> SECTION = "multimedia"
>
> DEPENDS = "imx-codec imx-parser gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-bad"
> -DEPENDS_append_mx6 = " imx-lib"
> -DEPENDS_append_mx7 = " imx-lib"
> -DEPENDS_append_imxvpu = " imx-vpuwrap libdrm"
> +DEPENDS:append:mx6 = " imx-lib"
> +DEPENDS:append:mx7 = " imx-lib"
> +DEPENDS:append:imxvpu = " imx-vpuwrap libdrm"
>
> # For backwards compatibility
> RREPLACES_${PN} = "gst1.0-fsl-plugin"
> @@ -31,14 +31,14 @@ S = "${WORKDIR}/git"
>
> inherit autotools pkgconfig use-imx-headers
>
> -PLATFORM_mx6 = "MX6"
> -PLATFORM_mx6sl = "MX6SL"
> -PLATFORM_mx6sx = "MX6SX"
> -PLATFORM_mx6ul = "MX6UL"
> -PLATFORM_mx6sll = "MX6SLL"
> -PLATFORM_mx7= "MX7D"
> -PLATFORM_mx7ulp= "MX7ULP"
> -PLATFORM_mx8 = "MX8"
> +PLATFORM:mx6 = "MX6"
> +PLATFORM:mx6sl = "MX6SL"
> +PLATFORM:mx6sx = "MX6SX"
> +PLATFORM:mx6ul = "MX6UL"
> +PLATFORM:mx6sll = "MX6SLL"
> +PLATFORM:mx7= "MX7D"
> +PLATFORM:mx7ulp= "MX7ULP"
> +PLATFORM:mx8 = "MX8"
>
> # Todo add a mechanism to map possible build targets
> EXTRA_OECONF = "PLATFORM=${PLATFORM} \
> @@ -55,7 +55,7 @@ RDEPENDS_${PN} += "imx-parser ${BEEP_RDEPENDS} gstreamer1.0-plugins-good-id3demu
> # overlaysink rely on G2D,
> # cannot be supported on i.MX6SLL & i.MX6UL & i.MX6ULL & i.MX7D
> PACKAGECONFIG ?= ""
> -PACKAGECONFIG_imxgpu2d = "overlaysink"
> +PACKAGECONFIG:imxgpu2d = "overlaysink"
>
>
> # FIXME: Add all features
> diff --git a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> index 76a52f26cb64..4bb76030ed62 100644
> --- a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> +++ b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> @@ -21,14 +21,14 @@ EXTRA_OECONF = "${@bb.utils.contains('TUNE_FEATURES', 'aarch64', '--enable-armv8
> bb.utils.contains('TUNE_FEATURES', 'callconvention-hard', '--enable-fhw', '', d), d)}"
>
> PACKAGECONFIG ?= ""
> -PACKAGECONFIG_imxvpu = "vpu"
> +PACKAGECONFIG:imxvpu = "vpu"
>
> # We need to ensure we don't have '-src' package overrided
> PACKAGE_DEBUG_SPLIT_STYLE = 'debug-without-src'
>
> PACKAGECONFIG[vpu] = "--enable-vpu,--disable-vpu,virtual/imxvpu"
>
> -do_install_append() {
> +do_install:append() {
> # LTIB move the files around or gst-fsl-plugin won't find them
> for p in $(find ${D}${libdir}/imx-mm -mindepth 2 -maxdepth 2 -not -type d); do
> mv $p ${D}${libdir}
> @@ -85,7 +85,7 @@ python __set_metapkg_rdepends() {
> codec_pkgs = oe.utils.packages_filter_out_system(d)
> codec_pkgs = filter(lambda x: x not in ['imx-codec-test-bin', 'imx-codec-test-source'],
> codec_pkgs)
> - d.appendVar('RDEPENDS_imx-codec-meta', ' ' + ' '.join(codec_pkgs))
> + d.appendVar('RDEPENDS:imx-codec-meta', ' ' + ' '.join(codec_pkgs))
> }
>
> PACKAGESPLITFUNCS =+ "__split_libfslcodec_plugins __set_metapkg_rdepends"
> diff --git a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> index 2b0282351840..f77e33f76d07 100644
> --- a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> +++ b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> @@ -8,7 +8,7 @@ SECTION = "multimedia"
> LIC_FILES_CHKSUM = "file://COPYING;md5=228c72f2a91452b8a03c4cab30f30ef9"
>
> DEPENDS = "virtual/imxvpu"
> -DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
> +DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
>
> SRC_URI = "git://github.com/NXP/imx-vpuwrap.git;protocol=https;branch=${SRCBRANCH}"
>
> @@ -19,7 +19,7 @@ S = "${WORKDIR}/git"
>
> inherit autotools pkgconfig
>
> -do_install_append() {
> +do_install:append() {
> # FIXME: Drop examples for now
> rm -r ${D}${datadir}
> }
> diff --git a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> index f66eff27568c..372d78dcb859 100644
> --- a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> +++ b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> @@ -15,10 +15,10 @@ S = "${WORKDIR}/git"
>
> inherit waf pkgconfig use-imx-headers
>
> -IMX_PLATFORM_mx6 = "imx6"
> -IMX_PLATFORM_mx8mq = "imx8m"
> -IMX_PLATFORM_mx8mm = "imx8mm"
> -IMX_PLATFORM_mx8mp = "imx8mm"
> +IMX_PLATFORM:mx6 = "imx6"
> +IMX_PLATFORM:mx8mq = "imx8m"
> +IMX_PLATFORM:mx8mm = "imx8mm"
> +IMX_PLATFORM:mx8mp = "imx8mm"
>
> EXTRA_OECONF = "--imx-platform=${IMX_PLATFORM} --libdir=${libdir} --imx-headers=${STAGING_INCDIR_IMX} --sysroot-path=${RECIPE_SYSROOT}"
>
> diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> index 78a17864724a..ae69be4c8601 100644
> --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> @@ -1,21 +1,21 @@
>
> -CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
> +CACHED_CONFIGUREVARS:append:mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
>
> -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/imx:"
> +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}/imx:"
>
> -SRC_URI_append_mx6 = " file://daemon.conf file://default.pa"
> -SRC_URI_append_mx7 = " file://daemon.conf file://default.pa \
> +SRC_URI:append:mx6 = " file://daemon.conf file://default.pa"
> +SRC_URI:append:mx7 = " file://daemon.conf file://default.pa \
> file://pulseaudio-remove-the-control-for-speaker-headphone-widge.patch \
> "
> -SRC_URI_append_mx8 = " file://daemon.conf file://default.pa"
> +SRC_URI:append:mx8 = " file://daemon.conf file://default.pa"
>
> -do_install_append() {
> +do_install:append() {
> if [ -e "${WORKDIR}/daemon.conf" ] && [ -e "${WORKDIR}/default.pa" ]; then
> install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
> install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
> fi
> }
>
> -PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
> -PACKAGE_ARCH_mx7 = "${MACHINE_SOCARCH}"
> -PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:mx6 = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:mx7 = "${MACHINE_SOCARCH}"
> +PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
> diff --git a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> index 58b6b8a45b18..b2ac77483ef8 100644
> --- a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> +++ b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> @@ -21,8 +21,8 @@ inherit python3native systemd
> SYSTEMD_SERVICE_${PN} = "tee-supplicant.service"
>
> OPTEE_ARCH ?= "arm32"
> -OPTEE_ARCH_armv7a = "arm32"
> -OPTEE_ARCH_aarch64 = "arm64"
> +OPTEE_ARCH:armv7a = "arm32"
> +OPTEE_ARCH:aarch64 = "arm64"
>
> EXTRA_OEMAKE = "ARCH=${OPTEE_ARCH} O=${B}"
>
> diff --git a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> index 712b1aa69046..c0b3b7631269 100644
> --- a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> +++ b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> @@ -22,23 +22,23 @@ inherit deploy python3native autotools
>
> # The platform flavor corresponds to the Yocto machine without the leading 'i'.
> PLATFORM_FLAVOR = "${@d.getVar('MACHINE')[1:]}"
> -PLATFORM_FLAVOR_imx6qpdlsolox = "mx6qsabresd"
> -PLATFORM_FLAVOR_imx6ul7d = "mx6ulevk"
> -PLATFORM_FLAVOR_imx6ull14x14evk = "mx6ullevk"
> -PLATFORM_FLAVOR_imx6ull9x9evk = "mx6ullevk"
> -PLATFORM_FLAVOR_imx6ulz-14x14-evk = "mx6ulzevk"
> -PLATFORM_FLAVOR_mx8mq = "mx8mqevk"
> -PLATFORM_FLAVOR_mx8mm = "mx8mmevk"
> -PLATFORM_FLAVOR_mx8mn = "mx8mnevk"
> -PLATFORM_FLAVOR_mx8mp = "mx8mpevk"
> -PLATFORM_FLAVOR_mx8qm = "mx8qmmek"
> -PLATFORM_FLAVOR_mx8qxp = "mx8qxpmek"
> -PLATFORM_FLAVOR_mx8dx = "mx8dxmek"
> -PLATFORM_FLAVOR_mx8dxl = "mx8dxlevk"
> +PLATFORM_FLAVOR:imx6qpdlsolox = "mx6qsabresd"
> +PLATFORM_FLAVOR:imx6ul7d = "mx6ulevk"
> +PLATFORM_FLAVOR:imx6ull14x14evk = "mx6ullevk"
> +PLATFORM_FLAVOR:imx6ull9x9evk = "mx6ullevk"
> +PLATFORM_FLAVOR:imx6ulz-14x14-evk = "mx6ulzevk"
> +PLATFORM_FLAVOR:mx8mq = "mx8mqevk"
> +PLATFORM_FLAVOR:mx8mm = "mx8mmevk"
> +PLATFORM_FLAVOR:mx8mn = "mx8mnevk"
> +PLATFORM_FLAVOR:mx8mp = "mx8mpevk"
> +PLATFORM_FLAVOR:mx8qm = "mx8qmmek"
> +PLATFORM_FLAVOR:mx8qxp = "mx8qxpmek"
> +PLATFORM_FLAVOR:mx8dx = "mx8dxmek"
> +PLATFORM_FLAVOR:mx8dxl = "mx8dxlevk"
>
> OPTEE_ARCH ?= "arm32"
> -OPTEE_ARCH_armv7a = "arm32"
> -OPTEE_ARCH_aarch64 = "arm64"
> +OPTEE_ARCH:armv7a = "arm32"
> +OPTEE_ARCH:aarch64 = "arm64"
>
> # Optee-os can be built for 32 bits and 64 bits at the same time
> # as long as the compilers are correctly defined.
> diff --git a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> index a8a1b245e496..4a6aec56dd45 100644
> --- a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> +++ b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> @@ -20,11 +20,11 @@ SRCREV = "0c998f42a3fb87b9f2929955cf4b0116cc515091"
> inherit python3native
>
> OPTEE_ARCH ?= "arm32"
> -OPTEE_ARCH_armv7a = "arm32"
> -OPTEE_ARCH_aarch64 = "arm64"
> +OPTEE_ARCH:armv7a = "arm32"
> +OPTEE_ARCH:aarch64 = "arm64"
>
> TA_DEV_KIT_DIR_arm = "${STAGING_INCDIR}/optee/export-user_ta_arm32/"
> -TA_DEV_KIT_DIR_aarch64 = "${STAGING_INCDIR}/optee/export-user_ta_arm64/"
> +TA_DEV_KIT_DIR:aarch64 = "${STAGING_INCDIR}/optee/export-user_ta_arm64/"
>
> CFLAGS += "--sysroot=${STAGING_DIR_HOST}"
> CXXFLAGS += "--sysroot=${STAGING_DIR_HOST}"
> diff --git a/recipes-security/optee/optee-os-qoriq_3.8.0.bb b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> index b8d764ff5e12..556f13518d7e 100644
> --- a/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> +++ b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> @@ -19,9 +19,9 @@ SRCREV = "0cb01f7f6aee552ead49990c06f69f73f459cc65"
> S = "${WORKDIR}/git"
>
> OPTEEMACHINE ?= "${MACHINE}"
> -OPTEEMACHINE_ls1088ardb-pb = "ls1088ardb"
> -OPTEEMACHINE_ls1046afrwy = "ls1046ardb"
> -OPTEEMACHINE_lx2162aqds = "lx2160aqds"
> +OPTEEMACHINE:ls1088ardb-pb = "ls1088ardb"
> +OPTEEMACHINE:ls1046afrwy = "ls1046ardb"
> +OPTEEMACHINE:lx2162aqds = "lx2160aqds"
>
> EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE} CFG_ARM64_core=y \
> ARCH=arm \
> @@ -31,10 +31,10 @@ EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE} CFG_ARM64_core=y \
> LDFLAGS= \
> LIBGCC_LOCATE_CFLAGS=--sysroot=${STAGING_DIR_HOST} \
> "
> -EXTRA_OEMAKE_append_lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-lx2160a-qds.dts CFG_EMBED_DT=y"
> +EXTRA_OEMAKE:append:lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-lx2160a-qds.dts CFG_EMBED_DT=y"
>
> -OPTEE_ARCH_armv7a = "arm32"
> -OPTEE_ARCH_aarch64 = "arm64"
> +OPTEE_ARCH:armv7a = "arm32"
> +OPTEE_ARCH:aarch64 = "arm64"
>
> do_compile() {
> unset LDFLAGS
> diff --git a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch b/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch
> index c5a64387f525..7fdf1dd8a62b 100644
> --- a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch
> +++ b/recipes-support/opencv/opencv/0001-Use-Os-to-compile-tinyxml2.cpp.patch
> @@ -21,10 +21,10 @@ index 56ca9e310..99b7a33f6 100644
>
> set(filter_srcs "${CMAKE_CURRENT_LIST_DIR}/src/tinyxml2/tinyxml2.cpp")
> if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
> -- ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override") # GCC
> -+ ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override -Os") # GCC
> +- ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override") # GCC
> ++ ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-suggest-override -Os") # GCC
> elseif(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
> - ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-inconsistent-missing-override") # Clang
> + ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-inconsistent-missing-override") # Clang
> endif()
> --
> 2.28.0
> diff --git a/recipes-support/opencv/opencv_4.5.2.imx.bb b/recipes-support/opencv/opencv_4.5.2.imx.bb
> index a86fd3ecb3da..402eab9bb52d 100644
> --- a/recipes-support/opencv/opencv_4.5.2.imx.bb
> +++ b/recipes-support/opencv/opencv_4.5.2.imx.bb
> @@ -11,8 +11,8 @@ SECTION = "libs"
> LICENSE = "Apache-2.0"
> LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
>
> -ARM_INSTRUCTION_SET_armv4 = "arm"
> -ARM_INSTRUCTION_SET_armv5 = "arm"
> +ARM_INSTRUCTION_SET:armv4 = "arm"
> +ARM_INSTRUCTION_SET:armv5 = "arm"
>
> DEPENDS = "libtool swig-native bzip2 zlib glib-2.0 libwebp"
>
> @@ -59,7 +59,7 @@ SRC_URI = "git://github.com/opencv/opencv.git;name=opencv \
> file://0001-Make-ts-module-external.patch \
> file://0001-sfm-link-with-Glog_LIBS.patch;patchdir=../contrib \
> "
> -SRC_URI_append_riscv64 = " file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
> +SRC_URI:append:riscv64 = " file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
>
> S = "${WORKDIR}/git"
>
> @@ -106,7 +106,7 @@ EXTRA_OECMAKE = "-DOPENCV_EXTRA_MODULES_PATH=${WORKDIR}/contrib/modules \
> ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.1", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -DENABLE_SSE41=1", "", d)} \
> ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.2", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -DENABLE_SSE41=1 -DENABLE_SSE42=1", "", d)} \
> "
> -EXTRA_OECMAKE_append_x86 = " -DX86=ON"
> +EXTRA_OECMAKE:append:x86 = " -DX86=ON"
>
> PACKAGECONFIG ??= "gapi python3 eigen jpeg png tiff v4l libv4l gstreamer samples tbb gphoto2 \
> ${@bb.utils.contains("DISTRO_FEATURES", "x11", "gtk", "", d)} \
> @@ -158,7 +158,7 @@ PACKAGES += "${@bb.utils.contains('PACKAGECONFIG', 'samples', '${PN}-samples', '
> ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-${BPN}', '', d)} \
> ${PN}-apps"
>
> -python populate_packages_prepend () {
> +python populate_packages:prepend () {
> cv_libdir = d.expand('${libdir}')
> do_split_packages(d, cv_libdir, '^lib(.*)\.so$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev', allow_links=True)
> do_split_packages(d, cv_libdir, '^lib(.*)\.la$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev')
> @@ -211,14 +211,14 @@ RDEPENDS_python3-opencv = "python3-core python3-numpy"
>
> RDEPENDS_${PN}-apps = "bash"
>
> -do_compile_prepend() {
> +do_compile:prepend() {
> # remove the build host info to improve reproducibility
> if [ -f ${WORKDIR}/build/modules/core/version_string.inc ]; then
> sed -i "s#${WORKDIR}#/workdir#g" ${WORKDIR}/build/modules/core/version_string.inc
> fi
> }
>
> -do_install_append() {
> +do_install:append() {
> # Move Python files into correct library folder (for multilib build)
> if [ "$libdir" != "/usr/lib" -a -d ${D}/usr/lib ]; then
> mv ${D}/usr/lib/* ${D}/${libdir}/
> @@ -245,7 +245,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
> SRCREV_opencv = "5423d53ae0d116ee5bbe52f8b5503f0cd8586998"
> OPENCV_SRC ?= "git://source.codeaurora.org/external/imx/opencv-imx.git;protocol=https"
> SRCBRANCH = "4.5.2_imx"
> -SRC_URI_remove = "git://github.com/opencv/opencv.git;name=opencv"
> +SRC_URI:remove = "git://github.com/opencv/opencv.git;name=opencv"
> SRC_URI =+ "${OPENCV_SRC};branch=${SRCBRANCH};name=opencv"
>
> # Add opencv_extra
> @@ -254,7 +254,7 @@ SRC_URI += " \
> git://github.com/opencv/opencv_extra.git;destsuffix=extra;name=extra \
> file://0001-Add-smaller-version-of-download_models.py.patch;patchdir=../extra \
> "
> -SRCREV_FORMAT_append = "_extra"
> +SRCREV_FORMAT:append = "_extra"
>
> # Add tiny-dnn
> SRC_URI[tinydnn.md5sum] = "adb1c512e09ca2c7a6faef36f9c53e59"
> @@ -264,25 +264,25 @@ SRC_URI += " \
> file://OpenCV_DNN_examples.patch \
> "
>
> -PACKAGECONFIG_remove = "eigen"
> -PACKAGECONFIG_append_mx8 = " dnn text"
> +PACKAGECONFIG:remove = "eigen"
> +PACKAGECONFIG:append:mx8 = " dnn text"
> PACKAGECONFIG_OPENCL = ""
> -PACKAGECONFIG_OPENCL_mx8 = "opencl"
> -PACKAGECONFIG_OPENCL_mx8dxl = ""
> -PACKAGECONFIG_OPENCL_mx8mm = ""
> -PACKAGECONFIG_OPENCL_mx8mnlite = ""
> -PACKAGECONFIG_append = " ${PACKAGECONFIG_OPENCL}"
> +PACKAGECONFIG_OPENCL:mx8 = "opencl"
> +PACKAGECONFIG_OPENCL:mx8dxl = ""
> +PACKAGECONFIG_OPENCL:mx8mm = ""
> +PACKAGECONFIG_OPENCL:mx8mnlite = ""
> +PACKAGECONFIG:append = " ${PACKAGECONFIG_OPENCL}"
>
> PACKAGECONFIG[openvx] = "-DWITH_OPENVX=ON -DOPENVX_ROOT=${STAGING_LIBDIR} -DOPENVX_LIB_CANDIDATES='OpenVX;OpenVXU',-DWITH_OPENVX=OFF,virtual/libopenvx,"
> PACKAGECONFIG[qt5] = "-DWITH_QT=ON -DOE_QMAKE_PATH_EXTERNAL_HOST_BINS=${STAGING_BINDIR_NATIVE} -DCMAKE_PREFIX_PATH=${STAGING_BINDIR_NATIVE}/cmake,-DWITH_QT=OFF,qtbase qtbase-native,"
> PACKAGECONFIG[tests-imx] = "-DINSTALL_TESTS=ON -DOPENCV_TEST_DATA_PATH=${S}/../extra/testdata, -DINSTALL_TESTS=OFF,"
>
> -do_unpack_extra_append() {
> +do_unpack_extra:append() {
> mkdir -p ${S}/3rdparty/tinydnn/
> tar xzf ${WORKDIR}/v1.0.0a3.tar.gz -C ${S}/3rdparty/tinydnn/
> }
>
> -do_install_append() {
> +do_install:append() {
> ln -sf opencv4/opencv2 ${D}${includedir}/opencv2
> install -d ${D}${datadir}/OpenCV/samples/data
> cp -r ${S}/samples/data/* ${D}${datadir}/OpenCV/samples/data
> --
> 2.31.1
>
>
>
>
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-freescale] [PATCH] meta-freescale: convert to new override syntax in honister
2021-08-07 11:33 ` [meta-freescale] " Otavio Salvador
@ 2021-08-10 16:03 ` Thomas Perrot
2021-08-10 18:55 ` Otavio Salvador
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Perrot @ 2021-08-10 16:03 UTC (permalink / raw)
To: meta-freescale; +Cc: Otavio Salvador
[-- Attachment #1: Type: text/plain, Size: 219465 bytes --]
Hello Otavio,
On Sat, 2021-08-07 at 08:33 -0300, Otavio Salvador wrote:
> Hello,
>
> We have an onging PR for it; please try it out.
>
Thanks, I didn't know I had to do PR on github for this layer.
Do you need help speeding up the PR merge regarding the new syntax?
Best regards,
Thomas
> Em sáb., 7 de ago. de 2021 às 04:09, Thomas Perrot
> <thomas.perrot@bootlin.com> escreveu:
> >
> > Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
> > ---
> > classes/fsl-eula-unpack.bbclass | 4 +-
> > classes/fsl-u-boot-localversion.bbclass | 2 +-
> > .../fsl-vivante-kernel-driver-handler.bbclass | 2 +-
> > classes/image_types_fsl.bbclass | 2 +-
> > classes/imx-boot-container.bbclass | 4 +-
> > classes/kernel-imximage.bbclass | 4 +-
> > classes/kernel-itbimage.bbclass | 2 +-
> > classes/mfgtool-initramfs-image.bbclass | 2 +-
> > classes/qoriq_build_64bit_kernel.bbclass | 4 +-
> > classes/use-imx-headers.bbclass | 6 +-
> > ...e-imx-security-controller-firmware.bbclass | 6 +-
> > conf/layer.conf | 2 +-
> > conf/machine/imx6qdlsabreauto.conf | 18 +-
> > conf/machine/imx6qdlsabresd.conf | 18 +-
> > conf/machine/imx6slevk.conf | 2 +-
> > conf/machine/imx6sllevk.conf | 2 +-
> > conf/machine/imx6sxsabreauto.conf | 4 +-
> > conf/machine/imx6sxsabresd.conf | 4 +-
> > conf/machine/imx6ulevk.conf | 12 +-
> > conf/machine/imx6ullevk.conf | 2 +-
> > conf/machine/imx6ulz-14x14-evk.conf | 2 +-
> > conf/machine/imx7dsabresd.conf | 2 +-
> > conf/machine/imx7ulpevk.conf | 4 +-
> > conf/machine/imx8dxl-lpddr4-evk.conf | 2 +-
> > conf/machine/imx8mm-ddr4-evk.conf | 2 +-
> > conf/machine/imx8mm-lpddr4-evk.conf | 2 +-
> > conf/machine/imx8mn-ddr4-evk.conf | 2 +-
> > conf/machine/imx8mn-lpddr4-evk.conf | 2 +-
> > conf/machine/imx8mp-ddr4-evk.conf | 2 +-
> > conf/machine/imx8mp-lpddr4-evk.conf | 2 +-
> > conf/machine/imx8mq-evk.conf | 12 +-
> > conf/machine/imx8qm-mek.conf | 8 +-
> > conf/machine/imx8qxp-mek.conf | 2 +-
> > conf/machine/include/imx-base.inc | 360 +++++++++-------
> > --
> > conf/machine/include/imx8dxl-evk.inc | 4 +-
> > conf/machine/include/imx8mm-evk.inc | 26 +-
> > conf/machine/include/imx8mn-evk.inc | 26 +-
> > conf/machine/include/imx8mp-evk.inc | 24 +-
> > conf/machine/include/imx8x-mek.inc | 6 +-
> > conf/machine/include/qoriq-base.inc | 8 +-
> > conf/machine/include/utilities.inc | 2 +-
> > conf/machine/ls1028ardb.conf | 2 +-
> > conf/machine/ls1043ardb.conf | 2 +-
> > conf/machine/ls1046afrwy.conf | 2 +-
> > conf/machine/ls1046ardb.conf | 2 +-
> > .../wayland/weston-init.bbappend | 2 +-
> > .../recipes-browser/chromium/chromium-imx.inc | 4 +-
> > .../clutter/clutter-1.0_%.bbappend | 2 +-
> > .../recipes-graphics/cogl/cogl-1.0_%.bbappend | 2 +-
> > .../wayland/weston-init.bbappend | 2 +-
> > .../glmark2/glmark2_%.bbappend | 8 +-
> > .../recipes-devtools/luajit/luajit_%.bbappend | 4 +-
> > .../recipes-dpaa/fmc/fmc_git.bb | 18 +-
> > .../xserver-common/xserver-common_%.bbappend | 6 +-
> > .../recipes-qt4/qt4/qt4-imx-support.inc | 12 +-
> > .../recipes-qt/qt5/qtbase_%.bbappend | 26 +-
> > .../recipes-qt/qt5/qtwayland_%.bbappend | 8 +-
> > .../libvirt/libvirt_%.bbappend | 6 +-
> > recipes-bsp/alsa-state/alsa-state.bbappend | 16 +-
> > recipes-bsp/atf/qoriq-atf_1.5.bb | 18 +-
> > recipes-bsp/atf/qoriq-atf_2.3.bb | 2 +-
> > .../firmware-imx/firmware-imx-8_8.12.bb | 4 +-
> > recipes-bsp/firmware-imx/firmware-imx_8.12.bb | 2 +-
> > recipes-bsp/firmware-qca/qca-tools_3.0.2.bb | 4 +-
> > recipes-bsp/formfactor/formfactor_%.bbappend | 2 +-
> > recipes-bsp/imx-atf/imx-atf_2.4.bb | 2 +-
> > recipes-bsp/imx-lib/imx-lib_git.bb | 18 +-
> > recipes-bsp/imx-mkimage/imx-boot_1.0.bb | 32 +-
> > recipes-bsp/imx-mkimage/imx-mkimage_git.bb | 6 +-
> > .../imx-sc-firmware/imx-sc-firmware_1.9.0.bb | 8 +-
> > recipes-bsp/imx-test/imx-test_git.bb | 28 +-
> > .../imx-vpu-hantro-daemon_1.0.0.bb | 8 +-
> > .../imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb | 6 +-
> > recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb | 2 +-
> > .../libimxdmabuffer/libimxdmabuffer_1.0.1.bb | 14 +-
> > recipes-bsp/mc-utils/mc-utils_git.bb | 10 +-
> > recipes-bsp/rcw/rcw_git.bb | 6 +-
> > recipes-bsp/u-boot/libubootenv_%.bbappend | 4 +-
> > .../u-boot/u-boot-fslc-mfgtool_2021.07.bb | 2 +-
> > recipes-bsp/u-boot/u-boot-fslc_2021.07.bb | 4 +-
> > .../u-boot/u-boot-imx-mfgtool_2021.04.bb | 2 +-
> > recipes-bsp/u-boot/u-boot-imx_2021.04.bb | 2 +-
> > recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb | 18 +-
> > .../iproute2/iproute2_%.bbappend | 2 +-
> > .../openssl/openssl_%.bbappend | 6 +-
> > .../init-ifupdown/init-ifupdown_%.bbappend | 2 +-
> > recipes-core/udev/udev-rules-qoriq.bb | 6 +-
> > recipes-devtools/qemu/qemu-qoriq_4.1.0.bb | 8 +-
> > recipes-devtools/qemu/qemu.inc | 12 +-
> > recipes-dpaa/fm-ucode/fm-ucode_git.bb | 14 +-
> > recipes-dpaa2/aiopsl/aiopsl_git.bb | 4 +-
> > .../management-complex_10.14.1.bb | 8 +-
> > .../management-complex_10.20.4.bb | 8 +-
> > .../management-complex_10.24.0.bb | 10 +-
> > recipes-extended/dpdk/dpdk.inc | 18 +-
> > recipes-extended/dpdk/dpdk_19.11-20.12.bb | 2 +-
> > recipes-extended/jailhouse/jailhouse_0.12.bb | 6 +-
> > recipes-extended/odp/odp-counters_git.bb | 2 +-
> > recipes-extended/odp/odp-module_git.bb | 2 +-
> > recipes-extended/odp/odp.inc | 2 +-
> > recipes-extended/odp/odp_git.bb | 18 +-
> > recipes-extended/procps/procps_%.bbappend | 2 +-
> > recipes-extended/testfloat/testfloat_2a.bb | 2 +-
> > recipes-extended/tsntool/tsntool_git.bb | 2 +-
> > .../packagegroups/packagegroup-fsl-isp.bb | 2 +-
> > .../packagegroups/packagegroup-fsl-qca6174.bb | 2 +-
> > .../packagegroups/packagegroup-fsl-qca9377.bb | 2 +-
> > recipes-graphics/cairo/cairo_%.bbappend | 4 +-
> > recipes-graphics/drm/libdrm_2.4.102.imx.bb | 6 +-
> > recipes-graphics/gtk+/gtk+3_%.bbappend | 4 +-
> > .../images/core-image-weston.bbappend | 2 +-
> > .../imx-gpu-apitrace_9.0.0.bb | 8 +-
> > .../imx-gpu-viv/imx-gpu-viv-6.inc | 44 +--
> > .../libepoxy/libepoxy_1.5.%.bbappend | 2 +-
> > recipes-graphics/libsdl2/libsdl2_%.bbappend | 4 +-
> > recipes-graphics/mesa/mesa-demos_%.bbappend | 16 +-
> > recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb | 2 +-
> > recipes-graphics/mesa/mesa-gl_%.bbappend | 2 +-
> > recipes-graphics/mesa/mesa_%.bbappend | 22 +-
> > .../vulkan/vulkan-loader_%.bbappend | 2 +-
> > recipes-graphics/waffle/waffle_%.bbappend | 10 +-
> > recipes-graphics/wayland/weston-init.bbappend | 26 +-
> > recipes-graphics/wayland/weston_9.0.0.imx.bb | 26 +-
> > .../pointercal-xinput_%.bbappend | 2 +-
> > .../xf86-video-imx-vivante_6.4.0.p0.0.bb | 2 +-
> > .../xserver-xf86-config_%.bbappend | 2 +-
> > .../xorg-xserver/xserver-xorg_%.bbappend | 14 +-
> > recipes-graphics/xwayland/xwayland_%.bbappend | 6 +-
> > recipes-kernel/ceetm/ceetm_git.bb | 2 +-
> > .../kernel-modules/kernel-module-ar_git.bb | 2 +-
> > .../kernel-modules/kernel-module-ipc.inc | 2 +-
> > .../kernel-module-qcacld-lea.inc | 2 +-
> > .../linux/linux-fslc-lts-mfgtool_5.10.bb | 2 +-
> > .../linux/linux-fslc-mfgtool_5.12.bb | 2 +-
> > .../linux/linux-imx-headers_5.10.bb | 2 +-
> > .../linux/linux-imx-mfgtool_5.10.bb | 2 +-
> > recipes-kernel/linux/linux-qoriq.inc | 16 +-
> > recipes-multimedia/alsa/alsa-lib_%.bbappend | 6 +-
> > .../gstreamer/gstreamer1.0-libav_1.16.0.bb | 8 +-
> > .../gstreamer1.0-plugins-bad_1.16.3.imx.bb | 16 +-
> > .../gstreamer1.0-plugins-base_1.16.%.bbappend | 6 +-
> > .../gstreamer1.0-plugins-base_1.16.2.imx.bb | 2 +-
> > .../gstreamer1.0-plugins-good_1.16.%.bbappend | 6 +-
> > .../gstreamer1.0-plugins-imx_2.0.0.bb | 16 +-
> > .../gstreamer/imx-gst1.0-plugin_4.5.7.bb | 24 +-
> > .../imx-codec/imx-codec_4.5.7.bb | 6 +-
> > .../imx-vpuwrap/imx-vpuwrap_4.5.7.bb | 4 +-
> > .../libimxvpuapi/libimxvpuapi2_2.2.0.bb | 8 +-
> > .../pulseaudio/pulseaudio_%.bbappend | 18 +-
> > .../optee-imx/optee-client_3.10.0.imx.bb | 4 +-
> > .../optee-imx/optee-os_3.10.0.imx.bb | 30 +-
> > .../optee-imx/optee-test_3.10.0.imx.bb | 6 +-
> > .../optee/optee-os-qoriq_3.8.0.bb | 12 +-
> > .../0001-Use-Os-to-compile-tinyxml2.cpp.patch | 6 +-
> > recipes-support/opencv/opencv_4.5.2.imx.bb | 36 +-
> > 155 files changed, 762 insertions(+), 762 deletions(-)
> >
> > diff --git a/classes/fsl-eula-unpack.bbclass b/classes/fsl-eula-
> > unpack.bbclass
> > index 498d7826d9cf..5690898c5a43 100644
> > --- a/classes/fsl-eula-unpack.bbclass
> > +++ b/classes/fsl-eula-unpack.bbclass
> > @@ -79,11 +79,11 @@ FSL_EULA_FILE_MD5SUM ?= \
> >
> > LIC_FILES_CHKSUM_LAYER ?=
> > "file://${FSL_EULA_FILE};md5=${FSL_EULA_FILE_MD5SUM}"
> > LIC_FILES_CHKSUM_LAYER[vardepsexclude] += "FSL_EULA_FILE"
> > -LIC_FILES_CHKSUM_append = " ${LIC_FILES_CHKSUM_LAYER}"
> > +LIC_FILES_CHKSUM:append = " ${LIC_FILES_CHKSUM_LAYER}"
> >
> > LIC_FILES_CHKSUM[vardepsexclude] += "FSL_EULA_FILE"
> >
> > -do_fetch_prepend() {
> > +do_fetch:prepend() {
> > if "Proprietary" not in d.getVar("LICENSE"):
> > bb.fatal("The recipe LICENSE should include Proprietary but
> > is " + d.getVar("LICENSE") + ".")
> > }
> > diff --git a/classes/fsl-u-boot-localversion.bbclass b/classes/fsl-u-
> > boot-localversion.bbclass
> > index 617aae1de215..ebde8ea718f2 100644
> > --- a/classes/fsl-u-boot-localversion.bbclass
> > +++ b/classes/fsl-u-boot-localversion.bbclass
> > @@ -14,7 +14,7 @@ LOCALVERSION ??= "+fslc"
> >
> > UBOOT_LOCALVERSION = "${LOCALVERSION}"
> >
> > -do_compile_prepend() {
> > +do_compile:prepend() {
> > if [ "${SCMVERSION}" = "y" ]; then
> > # Add GIT revision to the local version
> > head=`cd ${S} ; git rev-parse --verify --short HEAD
> > 2> /dev/null`
> > diff --git a/classes/fsl-vivante-kernel-driver-handler.bbclass
> > b/classes/fsl-vivante-kernel-driver-handler.bbclass
> > index 8ac8a33445d2..7ba597f1963e 100644
> > --- a/classes/fsl-vivante-kernel-driver-handler.bbclass
> > +++ b/classes/fsl-vivante-kernel-driver-handler.bbclass
> > @@ -49,7 +49,7 @@ python fsl_vivante_kernel_driver_handler () {
> > addhandler fsl_vivante_kernel_driver_handler
> > fsl_vivante_kernel_driver_handler[eventmask] =
> > "bb.event.RecipePreFinalise"
> >
> > -do_configure_append () {
> > +do_configure:append () {
> > if [ "${MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT}" = "1" ];
> > then
> > config="${B}/.config"
> >
> > diff --git a/classes/image_types_fsl.bbclass
> > b/classes/image_types_fsl.bbclass
> > index c49c51b7a348..d6d8da95fd3b 100644
> > --- a/classes/image_types_fsl.bbclass
> > +++ b/classes/image_types_fsl.bbclass
> > @@ -37,7 +37,7 @@ do_image_wic[depends] += " \
> > "
> >
> > # We need to apply a fixup inside of the partition table
> > -IMAGE_CMD_wic_append_mxs() {
> > +IMAGE_CMD_wic:append:mxs() {
> > # Change partition type for mxs processor family
> > bbnote "Setting partition type to 0x53 as required for mxs'
> > SoC family."
> > echo -n S | dd of=$out${IMAGE_NAME_SUFFIX}.wic bs=1 count=1
> > seek=450 conv=notrunc
> > diff --git a/classes/imx-boot-container.bbclass b/classes/imx-boot-
> > container.bbclass
> > index 41fe9cca739a..33de45c52b28 100644
> > --- a/classes/imx-boot-container.bbclass
> > +++ b/classes/imx-boot-container.bbclass
> > @@ -23,7 +23,7 @@
> >
> > # Define ATF binary file to be deployed to the U-Boot build folder
> > ATF_MACHINE_NAME = "bl31-${ATF_PLATFORM}.bin"
> > -ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES',
> > 'optee', '-optee', '', d)}"
> > +ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES',
> > 'optee', '-optee', '', d)}"
> >
> > # This package aggregates output deployed by other packages, so set
> > the
> > # appropriate dependencies for populate binaries task
> > @@ -76,7 +76,7 @@ addtask do_resolve_and_populate_binaries before
> > do_compile after do_configure
> > # This effectively would allow the usage of the same WKS file for
> > those
> > # derivatives that are using the boot container from U-Boot and
> > those
> > # that are not yet have support for it enabled.
> > -do_deploy_append() {
> > +do_deploy:append() {
> > # Deploy the resulted flash.bin for WIC to pick it up
> > if [ -n "${UBOOT_CONFIG}" ]; then
> > for config in ${UBOOT_MACHINE}; do
> > diff --git a/classes/kernel-imximage.bbclass b/classes/kernel-
> > imximage.bbclass
> > index 234cc00d3059..ccf7ec53bf45 100644
> > --- a/classes/kernel-imximage.bbclass
> > +++ b/classes/kernel-imximage.bbclass
> > @@ -17,7 +17,7 @@
> > #
> > # Copyright 2017 (C) O.S. Systems Software LTDA.
> >
> > -DEPENDS_append = ' u-boot-mkimage-native'
> > +DEPENDS:append = ' u-boot-mkimage-native'
> >
> > IMXIMAGE_ENTRYPOINT ?= "${UBOOT_ENTRYPOINT}"
> >
> > @@ -55,6 +55,6 @@ gen_imximage() {
> > done
> > }
> >
> > -do_deploy_append() {
> > +do_deploy:append() {
> > gen_imximage
> > }
> > diff --git a/classes/kernel-itbimage.bbclass b/classes/kernel-
> > itbimage.bbclass
> > index 84262879c09b..51a87319ce94 100644
> > --- a/classes/kernel-itbimage.bbclass
> > +++ b/classes/kernel-itbimage.bbclass
> > @@ -459,7 +459,7 @@ addtask assemble_fitimage_initramfs before
> > do_deploy after do_install
> >
> >
> > kernel_do_deploy[vardepsexclude] = "DATETIME"
> > -kernel_do_deploy_append() {
> > +kernel_do_deploy:append() {
> > # Update deploy directory
> > if echo ${KERNEL_IMAGETYPES} | grep -wq "itbImage"; then
> > cd ${B}
> > diff --git a/classes/mfgtool-initramfs-image.bbclass
> > b/classes/mfgtool-initramfs-image.bbclass
> > index 65028b8faa88..1d4c55131d67 100644
> > --- a/classes/mfgtool-initramfs-image.bbclass
> > +++ b/classes/mfgtool-initramfs-image.bbclass
> > @@ -13,7 +13,7 @@ FEATURE_PACKAGES_extfs = "packagegroup-fsl-mfgtool-
> > extfs"
> > FEATURE_PACKAGES_f2fs = "packagegroup-fsl-mfgtool-f2fs"
> >
> > IMAGE_FSTYPES = "cpio.gz.u-boot"
> > -IMAGE_FSTYPES_mxs = "cpio.gz.u-boot"
> > +IMAGE_FSTYPES:mxs = "cpio.gz.u-boot"
> > IMAGE_ROOTFS_SIZE ?= "8192"
> >
> > # Filesystems enabled by default
> > diff --git a/classes/qoriq_build_64bit_kernel.bbclass
> > b/classes/qoriq_build_64bit_kernel.bbclass
> > index 93b4d412ff3c..7014be91cc1f 100644
> > --- a/classes/qoriq_build_64bit_kernel.bbclass
> > +++ b/classes/qoriq_build_64bit_kernel.bbclass
> > @@ -6,8 +6,8 @@ python () {
> > if promote_kernel == "1":
> > sys_multilib = 'powerpc64' + d.getVar('TARGET_VENDOR',
> > False) + 'mllib64-' + d.getVar('HOST_OS', False)
> > tc_options = d.getVar('TOOLCHAIN_OPTIONS', False) +
> > '/../lib64-' + d.getVar("MACHINE", False)
> > - d.setVar('DEPENDS_append', ' lib64-gcc-cross-powerpc64
> > lib64-libgcc')
> > - d.setVar('PATH_append', ':' +
> > d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
> > + d.setVar('DEPENDS:append', ' lib64-gcc-cross-powerpc64
> > lib64-libgcc')
> > + d.setVar('PATH:append', ':' +
> > d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
> > d.setVar('KERNEL_CC', d.getVar('CCACHE', False) +
> > sys_multilib + '-' + 'gcc' + d.getVar('HOST_CC_KERNEL_ARCH', False) +
> > tc_options)
> > d.setVar('KERNEL_LD', d.getVar('CCACHE', False) +
> > sys_multilib + '-' + 'ld.bfd' + d.getVar('HOST_LD_KERNEL_ARCH',
> > False) + tc_options)
> > d.setVar('KERNEL_AR', d.getVar('CCACHE', False) +
> > sys_multilib + '-' + 'ar' + d.getVar('HOST_AR_KERNEL_ARCH', False))
> > diff --git a/classes/use-imx-headers.bbclass b/classes/use-imx-
> > headers.bbclass
> > index fcec68c8b3e0..b03d37413504 100644
> > --- a/classes/use-imx-headers.bbclass
> > +++ b/classes/use-imx-headers.bbclass
> > @@ -13,14 +13,14 @@
> > #
> > # Copyright 2018 (C) O.S. Systems Software LTDA.
> >
> > -DEPENDS_append_imx = " linux-imx-headers"
> > +DEPENDS:append:imx = " linux-imx-headers"
> >
> > # Set runtime dependency of -dev for package inheriting this class
> > to
> > # linux-imx-headers-dev package. This is required in order to
> > propagate
> > # headers into the SDK
> > RDEPENDS_${PN}-dev += "linux-imx-headers-dev"
> >
> > -PACKAGE_ARCH_imx ?= "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:imx ?= "${MACHINE_SOCARCH}"
> >
> > STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
> >
> > @@ -34,4 +34,4 @@ STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
> > # Typical example here would be imx-vpu-hantro recipe, which
> > requires NXP
> > # BSP and is not compatible with mainline.
> > COMPATIBLE_HOST = '(null)'
> > -COMPATIBLE_HOST_use-nxp-bsp = '.*'
> > +COMPATIBLE_HOST:use-nxp-bsp = '.*'
> > diff --git a/classes/use-imx-security-controller-firmware.bbclass
> > b/classes/use-imx-security-controller-firmware.bbclass
> > index 7c79fc62bbd5..9650059b5066 100644
> > --- a/classes/use-imx-security-controller-firmware.bbclass
> > +++ b/classes/use-imx-security-controller-firmware.bbclass
> > @@ -18,11 +18,11 @@
> >
> > SECO_FIRMWARE_NAME ?= ""
> >
> > -SECO_FIRMWARE_NAME_mx8qm = "mx8qmb0-ahab-container.img"
> > -SECO_FIRMWARE_NAME_mx8qxp = \
> > +SECO_FIRMWARE_NAME:mx8qm = "mx8qmb0-ahab-container.img"
> > +SECO_FIRMWARE_NAME:mx8qxp = \
> > "${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', 'mx8qxb0-
> > ahab-container.img', \
> > 'mx8qxc0-
> > ahab-container.img', d)}"
> > -SECO_FIRMWARE_NAME_mx8dxl = "mx8dxla1-ahab-container.img"
> > +SECO_FIRMWARE_NAME:mx8dxl = "mx8dxla1-ahab-container.img"
> >
> > python () {
> > if "mx8m" in d.getVar('MACHINEOVERRIDES').split(":"):
> > diff --git a/conf/layer.conf b/conf/layer.conf
> > index e07b65ab77f4..4487de9cc445 100644
> > --- a/conf/layer.conf
> > +++ b/conf/layer.conf
> > @@ -8,7 +8,7 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
> > BBFILE_COLLECTIONS += "freescale-layer"
> > BBFILE_PATTERN_freescale-layer := "^${LAYERDIR}/"
> > BBFILE_PRIORITY_freescale-layer = "5"
> > -LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott"
> > +LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott honister"
> >
> > # Add the Freescale-specific licenses into the metadata
> > LICENSE_PATH += "${LAYERDIR}/custom-licenses"
> > diff --git a/conf/machine/imx6qdlsabreauto.conf
> > b/conf/machine/imx6qdlsabreauto.conf
> > index b7aec8c257ee..0b5274cb8149 100644
> > --- a/conf/machine/imx6qdlsabreauto.conf
> > +++ b/conf/machine/imx6qdlsabreauto.conf
> > @@ -26,7 +26,7 @@ KERNEL_DEVICETREE = " \
> > imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb imx6dl-
> > sabreauto-ecspi.dtb \
> > imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb \
> > "
> > -KERNEL_DEVICETREE_use-mainline-bsp = " \
> > +KERNEL_DEVICETREE:use-mainline-bsp = " \
> > imx6qp-sabreauto.dtb \
> > imx6q-sabreauto.dtb \
> > imx6dl-sabreauto.dtb \
> > @@ -34,18 +34,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
> >
> > ### u-boot-fslc settings ###
> >
> > -SPL_BINARY_pn-u-boot-fslc = "SPL"
> > -UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
> > -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > +SPL_BINARY:pn-u-boot-fslc = "SPL"
> > +UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
> > +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> >
> > ### u-boot-imx settings ###
> >
> > # The u-boot-imx does not provide unified functionality for DL/Q/QP
> > SoC
> > # variants. Change the defconfig to the targeted SoC variant.
> > -SPL_BINARY_pn-u-boot-imx = ""
> > -UBOOT_MACHINE_pn-u-boot-imx = "mx6qsabreauto_defconfig"
> > -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> > -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > +SPL_BINARY:pn-u-boot-imx = ""
> > +UBOOT_MACHINE:pn-u-boot-imx = "mx6qsabreauto_defconfig"
> > +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> > +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> >
> > WKS_FILE = " \
> > ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> > @@ -54,6 +54,6 @@ WKS_FILE = " \
> >
> > SERIAL_CONSOLES = "115200;ttymxc3"
> >
> > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> >
> > MACHINE_FEATURES += " pci wifi bluetooth"
> > diff --git a/conf/machine/imx6qdlsabresd.conf
> > b/conf/machine/imx6qdlsabresd.conf
> > index b3d09e9397cb..27a2e9d7fa7f 100644
> > --- a/conf/machine/imx6qdlsabresd.conf
> > +++ b/conf/machine/imx6qdlsabresd.conf
> > @@ -35,7 +35,7 @@ KERNEL_DEVICETREE = " \
> > imx6dl-sabresd-hdcp.dtb \
> > imx6dl-sabresd-ldo.dtb \
> > "
> > -KERNEL_DEVICETREE_use-mainline-bsp = " \
> > +KERNEL_DEVICETREE:use-mainline-bsp = " \
> > imx6qp-sabresd.dtb \
> > imx6q-sabresd.dtb \
> > imx6dl-sabresd.dtb \
> > @@ -43,18 +43,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
> >
> > ### u-boot-fslc settings ###
> >
> > -SPL_BINARY_pn-u-boot-fslc = "SPL"
> > -UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > +SPL_BINARY:pn-u-boot-fslc = "SPL"
> > +UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> >
> > ### u-boot-imx settings ###
> >
> > # The u-boot-imx does not provide unified functionality for DL/Q/QP
> > SoC
> > # variants. Change the defconfig to the targeted SoC variant.
> > -SPL_BINARY_pn-u-boot-imx = ""
> > -UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> > -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > +SPL_BINARY:pn-u-boot-imx = ""
> > +UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> > +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> >
> > WKS_FILE = " \
> > ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> > @@ -63,6 +63,6 @@ WKS_FILE = " \
> >
> > SERIAL_CONSOLES = "115200;ttymxc0"
> >
> > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> >
> > MACHINE_FEATURES += " pci wifi bluetooth"
> > diff --git a/conf/machine/imx6slevk.conf
> > b/conf/machine/imx6slevk.conf
> > index 1e8c403b7cde..8bef21b680b4 100644
> > --- a/conf/machine/imx6slevk.conf
> > +++ b/conf/machine/imx6slevk.conf
> > @@ -10,7 +10,7 @@ include conf/machine/include/imx-base.inc
> > include conf/machine/include/tune-cortexa9.inc
> >
> > KERNEL_DEVICETREE = "imx6sl-evk.dtb"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > imx6sl-evk-btwifi.dtb \
> > imx6sl-evk-csi.dtb \
> > imx6sl-evk-ldo.dtb \
> > diff --git a/conf/machine/imx6sllevk.conf
> > b/conf/machine/imx6sllevk.conf
> > index 30b537f18666..6282533aa4f1 100644
> > --- a/conf/machine/imx6sllevk.conf
> > +++ b/conf/machine/imx6sllevk.conf
> > @@ -23,7 +23,7 @@ UBOOT_CONFIG[sd-optee] =
> > "mx6sllevk_optee_config,sdcard"
> > UBOOT_CONFIG[epdc] = "mx6sllevk_epdc_config"
> > UBOOT_CONFIG[mfgtool] = "mx6sllevk_config"
> >
> > -OPTEE_BIN_EXT_imx6sllevk = "6sllevk"
> > +OPTEE_BIN_EXT:imx6sllevk = "6sllevk"
> >
> > SERIAL_CONSOLES = "115200;ttymxc0"
> >
> > diff --git a/conf/machine/imx6sxsabreauto.conf
> > b/conf/machine/imx6sxsabreauto.conf
> > index f7031ccb1134..2354635e2b33 100644
> > --- a/conf/machine/imx6sxsabreauto.conf
> > +++ b/conf/machine/imx6sxsabreauto.conf
> > @@ -10,7 +10,7 @@ require conf/machine/include/imx-base.inc
> > require conf/machine/include/tune-cortexa9.inc
> >
> > KERNEL_DEVICETREE = "imx6sx-sabreauto.dtb"
> > -KERNEL_DEVICETREE_use-mainline-bsp = "imx6sx-sabreauto.dtb"
> > +KERNEL_DEVICETREE:use-mainline-bsp = "imx6sx-sabreauto.dtb"
> >
> > UBOOT_MAKE_TARGET = "u-boot.imx"
> > UBOOT_SUFFIX = "imx"
> > @@ -29,6 +29,6 @@ OPTEE_BIN_EXT = "6sxauto"
> >
> > SERIAL_CONSOLES = "115200;ttymxc3"
> >
> > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> >
> > MACHINE_FEATURES += " pci wifi bluetooth"
> > diff --git a/conf/machine/imx6sxsabresd.conf
> > b/conf/machine/imx6sxsabresd.conf
> > index ff7d6ae62d03..fcfcbd5f41c7 100644
> > --- a/conf/machine/imx6sxsabresd.conf
> > +++ b/conf/machine/imx6sxsabresd.conf
> > @@ -14,7 +14,7 @@ KERNEL_DEVICETREE = " \
> > imx6sx-sdb-reva.dtb \
> > imx6sx-sdb-sai.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > imx6sx-sdb-btwifi.dtb \
> > imx6sx-sdb-emmc.dtb \
> > imx6sx-sdb-lcdif1.dtb \
> > @@ -43,6 +43,6 @@ OPTEE_BIN_EXT = "6sxsdb"
> >
> > SERIAL_CONSOLES = "115200;ttymxc0"
> >
> > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> >
> > MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
> > diff --git a/conf/machine/imx6ulevk.conf
> > b/conf/machine/imx6ulevk.conf
> > index f7c5d8ae52df..6fd14456fb29 100644
> > --- a/conf/machine/imx6ulevk.conf
> > +++ b/conf/machine/imx6ulevk.conf
> > @@ -21,19 +21,19 @@ KERNEL_DEVICETREE = " \
> > imx6ul-14x14-evk-emmc.dtb \
> > imx6ul-14x14-evk-gpmi-weim.dtb \
> > "
> > -KERNEL_DEVICETREE_use-mainline-bsp = "imx6ul-14x14-evk.dtb"
> > +KERNEL_DEVICETREE:use-mainline-bsp = "imx6ul-14x14-evk.dtb"
> >
> > ### u-boot-fslc settings ###
> >
> > -SPL_BINARY_pn-u-boot-fslc = "SPL"
> > -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > +SPL_BINARY:pn-u-boot-fslc = "SPL"
> > +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> >
> > ### u-boot-imx settings ###
> >
> > # The u-boot-imx does not provide SPL support
> > -SPL_BINARY_pn-u-boot-imx = ""
> > -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> > -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > +SPL_BINARY:pn-u-boot-imx = ""
> > +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> > +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> >
> > WKS_FILE = " \
> > ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> > diff --git a/conf/machine/imx6ullevk.conf
> > b/conf/machine/imx6ullevk.conf
> > index bd592a20bf43..f5b7309fbe6b 100644
> > --- a/conf/machine/imx6ullevk.conf
> > +++ b/conf/machine/imx6ullevk.conf
> > @@ -15,7 +15,7 @@ KERNEL_DEVICETREE = " \
> > imx6ull-14x14-evk.dtb \
> > "
> >
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > imx6ull-14x14-evk-btwifi.dtb \
> > imx6ull-14x14-evk-btwifi-oob.dtb \
> > imx6ull-14x14-evk-emmc.dtb \
> > diff --git a/conf/machine/imx6ulz-14x14-evk.conf
> > b/conf/machine/imx6ulz-14x14-evk.conf
> > index 7b794e7ccb13..a27f1ef11277 100644
> > --- a/conf/machine/imx6ulz-14x14-evk.conf
> > +++ b/conf/machine/imx6ulz-14x14-evk.conf
> > @@ -14,7 +14,7 @@ MACHINE_FEATURES += "wifi bluetooth bcm4339
> > bcm43455"
> > KERNEL_DEVICETREE = " \
> > imx6ulz-14x14-evk.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > imx6ulz-14x14-evk-btwifi.dtb \
> > imx6ulz-14x14-evk-emmc.dtb \
> > imx6ulz-14x14-evk-gpmi-weim.dtb \
> > diff --git a/conf/machine/imx7dsabresd.conf
> > b/conf/machine/imx7dsabresd.conf
> > index e848f294395f..860c8007f711 100644
> > --- a/conf/machine/imx7dsabresd.conf
> > +++ b/conf/machine/imx7dsabresd.conf
> > @@ -12,7 +12,7 @@ require conf/machine/include/tune-cortexa7.inc
> > MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
> >
> > KERNEL_DEVICETREE = "imx7d-sdb.dtb"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > imx7d-sdb-epdc.dtb \
> > imx7d-sdb-gpmi-weim.dtb \
> > imx7d-sdb-m4.dtb \
> > diff --git a/conf/machine/imx7ulpevk.conf
> > b/conf/machine/imx7ulpevk.conf
> > index a587f44b388c..d685a90caca2 100644
> > --- a/conf/machine/imx7ulpevk.conf
> > +++ b/conf/machine/imx7ulpevk.conf
> > @@ -14,10 +14,10 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43430"
> > KERNEL_DEVICETREE = " \
> > imx7ulp-evk.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-mainline-bsp = " \
> > +KERNEL_DEVICETREE:append:use-mainline-bsp = " \
> > imx7ulp-com.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > imx7ulp-evk-ft5416.dtb \
> > imx7ulp-evk-mipi.dtb \
> > imx7ulp-evkb.dtb \
> > diff --git a/conf/machine/imx8dxl-lpddr4-evk.conf
> > b/conf/machine/imx8dxl-lpddr4-evk.conf
> > index 1ea5260bb2c9..d44a4732128a 100644
> > --- a/conf/machine/imx8dxl-lpddr4-evk.conf
> > +++ b/conf/machine/imx8dxl-lpddr4-evk.conf
> > @@ -5,7 +5,7 @@
> >
> > require conf/machine/include/imx8dxl-evk.inc
> > KERNEL_DEVICETREE_BASENAME = "imx8dxl-evk"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-enet0.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-enet0-tja1100.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
> > diff --git a/conf/machine/imx8mm-ddr4-evk.conf b/conf/machine/imx8mm-
> > ddr4-evk.conf
> > index 3901bb92c3a0..f21cc38148b9 100644
> > --- a/conf/machine/imx8mm-ddr4-evk.conf
> > +++ b/conf/machine/imx8mm-ddr4-evk.conf
> > @@ -7,7 +7,7 @@
> > require include/imx8mm-evk.inc
> >
> > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-revb-rm67191.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-revb.dtb \
> > "
> > diff --git a/conf/machine/imx8mm-lpddr4-evk.conf
> > b/conf/machine/imx8mm-lpddr4-evk.conf
> > index 6007c5404fc1..0a85ed20ac81 100644
> > --- a/conf/machine/imx8mm-lpddr4-evk.conf
> > +++ b/conf/machine/imx8mm-lpddr4-evk.conf
> > @@ -8,7 +8,7 @@ require include/imx8mm-evk.inc
> >
> > # The device tree name is implicit for LPDDR4, so can't use MACHINE
> > here
> > KERNEL_DEVICETREE_BASENAME = "imx8mm-evk"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-swpdm.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-ak4497.dtb \
> > diff --git a/conf/machine/imx8mn-ddr4-evk.conf b/conf/machine/imx8mn-
> > ddr4-evk.conf
> > index 442afdbd0547..d004d2aecb3b 100644
> > --- a/conf/machine/imx8mn-ddr4-evk.conf
> > +++ b/conf/machine/imx8mn-ddr4-evk.conf
> > @@ -7,7 +7,7 @@
> > require include/imx8mn-evk.inc
> >
> > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-usd-wifi.dtb \
> > "
> > UBOOT_CONFIG_BASENAME = "imx8mn_ddr4_evk"
> > diff --git a/conf/machine/imx8mn-lpddr4-evk.conf
> > b/conf/machine/imx8mn-lpddr4-evk.conf
> > index 7c58bc19f8a2..2e5e6be9aa21 100644
> > --- a/conf/machine/imx8mn-lpddr4-evk.conf
> > +++ b/conf/machine/imx8mn-lpddr4-evk.conf
> > @@ -8,7 +8,7 @@ require include/imx8mn-evk.inc
> >
> > # The device tree name is implicit for LPDDR4, so can't use MACHINE
> > here
> > KERNEL_DEVICETREE_BASENAME = "imx8mn-evk"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
> > "
> > UBOOT_CONFIG_BASENAME = "imx8mn_evk"
> > diff --git a/conf/machine/imx8mp-ddr4-evk.conf b/conf/machine/imx8mp-
> > ddr4-evk.conf
> > index 09517769f00b..78e0c1608152 100644
> > --- a/conf/machine/imx8mp-ddr4-evk.conf
> > +++ b/conf/machine/imx8mp-ddr4-evk.conf
> > @@ -8,7 +8,7 @@ require include/imx8mp-evk.inc
> >
> > # FIXME: This machine is not yet supported by u-boot-fslc, so for
> > now
> > # use u-boot-imx for mainline.
> > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-imx"
> > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-imx"
> >
> > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> >
> > diff --git a/conf/machine/imx8mp-lpddr4-evk.conf
> > b/conf/machine/imx8mp-lpddr4-evk.conf
> > index cf926c08d0a1..76a1f44990fe 100644
> > --- a/conf/machine/imx8mp-lpddr4-evk.conf
> > +++ b/conf/machine/imx8mp-lpddr4-evk.conf
> > @@ -11,7 +11,7 @@ KERNEL_DEVICETREE_BASENAME = "imx8mp-evk"
> >
> > # NXP kernel has additional DTB files for various board
> > configuration and
> > # derivates. Include them here for NXP BSP only
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/imx8mp-ab2.dtb \
> > freescale/imx8mp-evk-basler.dtb \
> > freescale/imx8mp-evk-basler-ov2775.dtb \
> > diff --git a/conf/machine/imx8mq-evk.conf b/conf/machine/imx8mq-
> > evk.conf
> > index 9907ef4b26c2..b6dcd89026bb 100644
> > --- a/conf/machine/imx8mq-evk.conf
> > +++ b/conf/machine/imx8mq-evk.conf
> > @@ -12,14 +12,14 @@ require conf/machine/include/tune-cortexa53.inc
> > IMX_DEFAULT_BSP = "nxp"
> >
> > MACHINE_FEATURES += "pci wifi bluetooth optee bcm43455 bcm4356"
> > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> >
> > -MACHINE_SOCARCH_FILTER_append_mx8mq = " virtual/libopenvg
> > virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa
> > virtual/libgl virtual/libg2d"
> > +MACHINE_SOCARCH_FILTER:append:mx8mq = " virtual/libopenvg
> > virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa
> > virtual/libgl virtual/libg2d"
> >
> > KERNEL_DEVICETREE = " \
> > freescale/imx8mq-evk.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/imx8mq-evk-ak4497.dtb \
> > freescale/imx8mq-evk-audio-tdm.dtb \
> > freescale/imx8mq-evk-dcss-adv7535.dtb \
> > @@ -40,8 +40,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > freescale/imx8mq-evk-usdhc2-m2.dtb \
> > "
> >
> > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> >
> > UBOOT_SUFFIX = "bin"
> >
> > @@ -77,7 +77,7 @@ IMX_BOOT_SEEK = "33"
> > OPTEE_BIN_EXT = "8mq"
> >
> > # Add additional firmware
> > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> >
> > # Use gstreamer 1.16 from meta-freescale
> > PREFERRED_VERSION_gstreamer1.0 ?= "1.16.imx"
> > diff --git a/conf/machine/imx8qm-mek.conf b/conf/machine/imx8qm-
> > mek.conf
> > index 5ceb6b8bb2f7..655c453f6262 100644
> > --- a/conf/machine/imx8qm-mek.conf
> > +++ b/conf/machine/imx8qm-mek.conf
> > @@ -11,7 +11,7 @@ require conf/machine/include/tune-cortexa72-
> > cortexa53.inc
> > IMX_DEFAULT_BSP = "nxp"
> >
> > MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
> > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> >
> > # Don't include kernels in standard images
> > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > @@ -55,8 +55,8 @@ UBOOT_MAKE_TARGET = \
> > SPL_BINARY = \
> > "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-
> > spl.bin', \
> > '', d)}"
> > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> >
> > UBOOT_SUFFIX = "bin"
> >
> > @@ -86,4 +86,4 @@ IMX_BOOT_SOC_TARGET = "iMX8QM"
> > BOARD_TYPE = "mek"
> >
> > # Add additional firmware
> > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > diff --git a/conf/machine/imx8qxp-mek.conf b/conf/machine/imx8qxp-
> > mek.conf
> > index 5b29138fc3fd..29412cc35bc9 100644
> > --- a/conf/machine/imx8qxp-mek.conf
> > +++ b/conf/machine/imx8qxp-mek.conf
> > @@ -8,7 +8,7 @@ MACHINEOVERRIDES =. "mx8qxp:"
> > require include/imx8x-mek.inc
> >
> > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-a0.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-dom0.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-dpu-lcdif.dtb \
> > diff --git a/conf/machine/include/imx-base.inc
> > b/conf/machine/include/imx-base.inc
> > index f92a08af1c00..78f815d1310d 100644
> > --- a/conf/machine/include/imx-base.inc
> > +++ b/conf/machine/include/imx-base.inc
> > @@ -13,8 +13,8 @@ require conf/machine/include/utilities.inc
> > IMX_DEFAULT_BSP ?= "mainline"
> >
> > # Those are SoC families we'd like to force the use of mainline BSP.
> > -IMX_DEFAULT_BSP_mxs ?= "mainline"
> > -IMX_DEFAULT_BSP_mx5 ?= "mainline"
> > +IMX_DEFAULT_BSP:mxs ?= "mainline"
> > +IMX_DEFAULT_BSP:mx5 ?= "mainline"
> >
> > MACHINEOVERRIDES =. "use-${IMX_DEFAULT_BSP}-bsp:"
> >
> > @@ -32,16 +32,16 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
> > # ,----[ imx6qdlsabresd.conf ]
> > # | ### u-boot-fslc settings ###
> > # |
> > -# | SPL_BINARY_pn-u-boot-fslc = "SPL"
> > -# | UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > -# | UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > +# | SPL_BINARY:pn-u-boot-fslc = "SPL"
> > +# | UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > +# | UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> > # |
> > # | ### u-boot-imx settings ###
> > # |
> > # | # The u-boot-imx does not provide unified functionality for
> > DL/Q/QP SoC
> > # | # variants. Change the defconfig to the targeted SoC variant.
> > -# | UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > -# | UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > +# | UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > +# | UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> > # `----
> > #
> > # As result, the 'UBOOT_SUFFIX' is dynamically set based on the
> > preferred U-Boot
> > @@ -61,7 +61,7 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
> > # | UBOOT_MACHINE = "mx53loco_config"
> > # `----
> > IMX_DEFAULT_BOOTLOADER ??= "u-boot-fslc"
> > -UBOOT_SUFFIX ?= "${UBOOT_SUFFIX_pn-${IMX_DEFAULT_BOOTLOADER}}"
> > +UBOOT_SUFFIX ?= "${UBOOT_SUFFIX:pn-${IMX_DEFAULT_BOOTLOADER}}"
> >
> > # We need to export the original variable to allow it to be used
> > when generating
> > # wic based images.
> > @@ -75,33 +75,33 @@ PREFERRED_PROVIDER_virtual/bootloader ??=
> > "${IMX_DEFAULT_BOOTLOADER}"
> >
> > PREFERRED_PROVIDER_u-boot-mxsboot-native ??= "u-boot-fslc-mxsboot-
> > native"
> >
> > -UBOOT_ENTRYPOINT_mxs = "0x40008000"
> > -UBOOT_ENTRYPOINT_mx51 = "0x90008000"
> > -UBOOT_ENTRYPOINT_mx53 = "0x70008000"
> > -UBOOT_ENTRYPOINT_mx6 = "0x10008000"
> > -UBOOT_ENTRYPOINT_mx6sl = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx6sll = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx6sx = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx6ul = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx6ull = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx6ulz = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx7 = "0x80008000"
> > -UBOOT_ENTRYPOINT_mx7ulp = "0x60008000"
> > -UBOOT_ENTRYPOINT_mx8m = "0x40480000"
> > -UBOOT_ENTRYPOINT_vf = "0x80008000"
> > +UBOOT_ENTRYPOINT:mxs = "0x40008000"
> > +UBOOT_ENTRYPOINT:mx51 = "0x90008000"
> > +UBOOT_ENTRYPOINT:mx53 = "0x70008000"
> > +UBOOT_ENTRYPOINT:mx6 = "0x10008000"
> > +UBOOT_ENTRYPOINT:mx6sl = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx6sll = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx6sx = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx6ul = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx6ull = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx6ulz = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx7 = "0x80008000"
> > +UBOOT_ENTRYPOINT:mx7ulp = "0x60008000"
> > +UBOOT_ENTRYPOINT:mx8m = "0x40480000"
> > +UBOOT_ENTRYPOINT:vf = "0x80008000"
> >
> > # Some derivates can utilize the boot container provided by U-Boot,
> > # below variable sets that those machines which have a imx-boot-
> > container
> > # in their MACHINEOVERRIDES can inherit a imx-boot-container class
> > UBOOT_PROVIDES_BOOT_CONTAINER = "0"
> > -UBOOT_PROVIDES_BOOT_CONTAINER_imx-boot-container = "1"
> > +UBOOT_PROVIDES_BOOT_CONTAINER:imx-boot-container = "1"
> >
> > PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
> > XSERVER_DRIVER = "xf86-video-fbdev"
> > -XSERVER_DRIVER_imxgpu2d = "xf86-video-imx-vivante"
> > -XSERVER_DRIVER_vf = "xf86-video-modesetting"
> > -XSERVER_DRIVER_append_mx8 = " xf86-video-modesetting"
> > -XSERVER_DRIVER_use-mainline-bsp = " \
> > +XSERVER_DRIVER:imxgpu2d = "xf86-video-imx-vivante"
> > +XSERVER_DRIVER:vf = "xf86-video-modesetting"
> > +XSERVER_DRIVER:append:mx8 = " xf86-video-modesetting"
> > +XSERVER_DRIVER:use-mainline-bsp = " \
> > xf86-video-fbdev \
> > xf86-video-modesetting \
> > xserver-xorg-extension-glx \
> > @@ -118,41 +118,41 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
> > # ARM_INSTRUCTION_SET = "thumb"
> > #
> > # handled by software
> > -# DEFAULTTUNE_mx6 ?= "cortexa9t-neon"
> > +# DEFAULTTUNE:mx6 ?= "cortexa9t-neon"
> > # handled by hardware
> > -DEFAULTTUNE_mx6 ?= "cortexa9thf-neon"
> > -DEFAULTTUNE_mx6ul ?= "cortexa7thf-neon"
> > -DEFAULTTUNE_mx6ull ?= "cortexa7thf-neon"
> > -DEFAULTTUNE_mx6ulz ?= "cortexa7thf-neon"
> > -DEFAULTTUNE_mx7 ?= "cortexa7thf-neon"
> > -DEFAULTTUNE_vf ?= "cortexa5thf-neon"
> > +DEFAULTTUNE:mx6 ?= "cortexa9thf-neon"
> > +DEFAULTTUNE:mx6ul ?= "cortexa7thf-neon"
> > +DEFAULTTUNE:mx6ull ?= "cortexa7thf-neon"
> > +DEFAULTTUNE:mx6ulz ?= "cortexa7thf-neon"
> > +DEFAULTTUNE:mx7 ?= "cortexa7thf-neon"
> > +DEFAULTTUNE:vf ?= "cortexa5thf-neon"
> >
> > -DEFAULTTUNE_mx8m ?= "cortexa53-crypto"
> > -DEFAULTTUNE_mx8qm ?= "cortexa72-cortexa53-crypto"
> > -DEFAULTTUNE_mx8qxp ?= "cortexa35-crypto"
> > +DEFAULTTUNE:mx8m ?= "cortexa53-crypto"
> > +DEFAULTTUNE:mx8qm ?= "cortexa72-cortexa53-crypto"
> > +DEFAULTTUNE:mx8qxp ?= "cortexa35-crypto"
> >
> > INHERIT += "machine-overrides-extender"
> >
> > -MACHINEOVERRIDES_EXTENDER_mx25 = "use-mainline-bsp"
> > -MACHINEOVERRIDES_EXTENDER_mx6q =
> > "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx6dl =
> > "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
> > -MACHINEOVERRIDES_EXTENDER_mx6sx =
> > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx6sl =
> > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
> > -MACHINEOVERRIDES_EXTENDER_mx6sll = "imxfbdev:imxpxp:imxepdc"
> > -MACHINEOVERRIDES_EXTENDER_mx6ul = "imxfbdev:imxpxp"
> > -MACHINEOVERRIDES_EXTENDER_mx6ull = "imxfbdev:imxpxp:imxepdc"
> > -MACHINEOVERRIDES_EXTENDER_mx6ulz = "imxfbdev:imxpxp:imxepdc"
> > -MACHINEOVERRIDES_EXTENDER_mx7d = "imxfbdev:imxpxp:imxepdc"
> > -MACHINEOVERRIDES_EXTENDER_mx7ulp =
> > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8qm =
> > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8mm =
> > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8mn = "imxdrm:imxgpu:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8mp =
> > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8qxp =
> > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > -MACHINEOVERRIDES_EXTENDER_mx8dxl = "imxfbdev"
> > -
> > -MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp = " \
> > +MACHINEOVERRIDES_EXTENDER:mx25 = "use-mainline-bsp"
> > +MACHINEOVERRIDES_EXTENDER:mx6q =
> > "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx6dl =
> > "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
> > +MACHINEOVERRIDES_EXTENDER:mx6sx =
> > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx6sl =
> > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
> > +MACHINEOVERRIDES_EXTENDER:mx6sll = "imxfbdev:imxpxp:imxepdc"
> > +MACHINEOVERRIDES_EXTENDER:mx6ul = "imxfbdev:imxpxp"
> > +MACHINEOVERRIDES_EXTENDER:mx6ull = "imxfbdev:imxpxp:imxepdc"
> > +MACHINEOVERRIDES_EXTENDER:mx6ulz = "imxfbdev:imxpxp:imxepdc"
> > +MACHINEOVERRIDES_EXTENDER:mx7d = "imxfbdev:imxpxp:imxepdc"
> > +MACHINEOVERRIDES_EXTENDER:mx7ulp =
> > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8qm =
> > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8mm =
> > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8mn = "imxdrm:imxgpu:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8mp =
> > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8qxp =
> > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > +MACHINEOVERRIDES_EXTENDER:mx8dxl = "imxfbdev"
> > +
> > +MACHINEOVERRIDES_EXTENDER_FILTER_OUT:use-mainline-bsp = " \
> > imx \
> > \
> > mx6 \
> > @@ -182,40 +182,40 @@ MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-
> > mainline-bsp = " \
> >
> > # Sub-architecture support
> > MACHINE_SOCARCH_SUFFIX ?= ""
> > -MACHINE_SOCARCH_SUFFIX_mx6q = "-mx6qdl"
> > -MACHINE_SOCARCH_SUFFIX_mx6dl = "-mx6qdl"
> > -MACHINE_SOCARCH_SUFFIX_mx6sx = "-mx6sx"
> > -MACHINE_SOCARCH_SUFFIX_mx6sl = "-mx6sl"
> > -MACHINE_SOCARCH_SUFFIX_mx6sll= "-mx6sll"
> > -MACHINE_SOCARCH_SUFFIX_mx7d = "-mx7d"
> > -MACHINE_SOCARCH_SUFFIX_mx7ulp = "-mx7ulp"
> > -MACHINE_SOCARCH_SUFFIX_vf60 = "-vf60"
> > -MACHINE_SOCARCH_SUFFIX_vf50 = "-vf50"
> > -MACHINE_SOCARCH_SUFFIX_mx6ul = "-mx6ul"
> > -MACHINE_SOCARCH_SUFFIX_mx6ull = "-mx6ul"
> > -MACHINE_SOCARCH_SUFFIX_mx6ulz = "-mx6ul"
> > -MACHINE_SOCARCH_SUFFIX_mx8qm = "-mx8"
> > -MACHINE_SOCARCH_SUFFIX_mx8mm = "-mx8mm"
> > -MACHINE_SOCARCH_SUFFIX_mx8mn = "-mx8mn"
> > -MACHINE_SOCARCH_SUFFIX_mx8mp = "-mx8mp"
> > -MACHINE_SOCARCH_SUFFIX_mx8mq = "-mx8m"
> > -MACHINE_SOCARCH_SUFFIX_mx8qxp = "-mx8"
> > -MACHINE_SOCARCH_SUFFIX_mx8dxl = "-mx8dxl"
> > -MACHINE_SOCARCH_SUFFIX_use-mainline-bsp = "-imx"
> > +MACHINE_SOCARCH_SUFFIX:mx6q = "-mx6qdl"
> > +MACHINE_SOCARCH_SUFFIX:mx6dl = "-mx6qdl"
> > +MACHINE_SOCARCH_SUFFIX:mx6sx = "-mx6sx"
> > +MACHINE_SOCARCH_SUFFIX:mx6sl = "-mx6sl"
> > +MACHINE_SOCARCH_SUFFIX:mx6sll= "-mx6sll"
> > +MACHINE_SOCARCH_SUFFIX:mx7d = "-mx7d"
> > +MACHINE_SOCARCH_SUFFIX:mx7ulp = "-mx7ulp"
> > +MACHINE_SOCARCH_SUFFIX:vf60 = "-vf60"
> > +MACHINE_SOCARCH_SUFFIX:vf50 = "-vf50"
> > +MACHINE_SOCARCH_SUFFIX:mx6ul = "-mx6ul"
> > +MACHINE_SOCARCH_SUFFIX:mx6ull = "-mx6ul"
> > +MACHINE_SOCARCH_SUFFIX:mx6ulz = "-mx6ul"
> > +MACHINE_SOCARCH_SUFFIX:mx8qm = "-mx8"
> > +MACHINE_SOCARCH_SUFFIX:mx8mm = "-mx8mm"
> > +MACHINE_SOCARCH_SUFFIX:mx8mn = "-mx8mn"
> > +MACHINE_SOCARCH_SUFFIX:mx8mp = "-mx8mp"
> > +MACHINE_SOCARCH_SUFFIX:mx8mq = "-mx8m"
> > +MACHINE_SOCARCH_SUFFIX:mx8qxp = "-mx8"
> > +MACHINE_SOCARCH_SUFFIX:mx8dxl = "-mx8dxl"
> > +MACHINE_SOCARCH_SUFFIX:use-mainline-bsp = "-imx"
> >
> > MACHINE_ARCH_FILTER = "virtual/kernel"
> > -MACHINE_SOCARCH_FILTER_append_imx = " \
> > +MACHINE_SOCARCH_FILTER:append:imx = " \
> > alsa-lib \
> > gstreamer1.0 \
> > weston \
> > "
> > -MACHINE_SOCARCH_FILTER_append_imxvpu = " \
> > +MACHINE_SOCARCH_FILTER:append:imxvpu = " \
> > imx-codec \
> > imx-vpuwrap \
> > libimxvpuapi \
> > virtual/imxvpu \
> > "
> > -MACHINE_SOCARCH_FILTER_append_imxgpu = " \
> > +MACHINE_SOCARCH_FILTER:append:imxgpu = " \
> > virtual/egl \
> > virtual/mesa \
> > virtual/libopenvg \
> > @@ -225,15 +225,15 @@ MACHINE_SOCARCH_FILTER_append_imxgpu = " \
> > opencv \
> > pango \
> > "
> > -MACHINE_SOCARCH_FILTER_append_imxgpu2d = " \
> > +MACHINE_SOCARCH_FILTER:append:imxgpu2d = " \
> > virtual/libg2d \
> > "
> > -MACHINE_SOCARCH_FILTER_append_imxgpu3d = " \
> > +MACHINE_SOCARCH_FILTER:append:imxgpu3d = " \
> > virtual/libgl \
> > virtual/libgles1 \
> > virtual/libgles2 \
> > "
> > -MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
> > +MACHINE_SOCARCH_FILTER:append:use-mainline-bsp = " \
> > virtual/egl \
> > virtual/libopenvg \
> > virtual/libg2d \
> > @@ -245,23 +245,23 @@ MACHINE_SOCARCH_FILTER_append_use-mainline-bsp
> > = " \
> > pango \
> > qtbase \
> > "
> > -MACHINE_SOCARCH_FILTER_append_mx6q = " \
> > +MACHINE_SOCARCH_FILTER:append:mx6q = " \
> > opencl-icd-loader \
> > opencl-clhpp \
> > opencl-headers \
> > "
> > -MACHINE_SOCARCH_FILTER_append_mx8 = " \
> > +MACHINE_SOCARCH_FILTER:append:mx8 = " \
> > opencl-icd-loader \
> > opencl-clhpp \
> > opencl-headers \
> > "
> > -MACHINE_SOCARCH_FILTER_append_mx8qm = " \
> > +MACHINE_SOCARCH_FILTER:append:mx8qm = " \
> > virtual/libopenvx \
> > "
> >
> > INHERIT += "fsl-dynamic-packagearch"
> >
> > -SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
> > +SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS:append = " \
> > imx-gpu-viv->kernel-module-imx-gpu-viv \
> > libimxvpuapi->virtual/imxvpu \
> > imx-vpuwrap->virtual/imxvpu \
> > @@ -271,44 +271,44 @@ SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
> >
> > # Firmware
> > MACHINE_FIRMWARE ?= ""
> > -MACHINE_FIRMWARE_append_mx25 = " firmware-imx-sdma-imx25"
> > -MACHINE_FIRMWARE_append_mx27 = " firmware-imx-vpu-imx27"
> > -MACHINE_FIRMWARE_append_mx7d = " linux-firmware-imx-sdma-imx7d
> > firmware-imx-epdc"
> > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-imx-sdma-imx6q"
> > -MACHINE_FIRMWARE_append_mx6q = " firmware-imx-vpu-imx6q"
> > -MACHINE_FIRMWARE_append_mx6dl = " firmware-imx-vpu-imx6d firmware-
> > imx-epdc"
> > -MACHINE_FIRMWARE_append_mx6sl = " firmware-imx-epdc"
> > -MACHINE_FIRMWARE_append_mx6sll = " firmware-imx-epdc"
> > -MACHINE_FIRMWARE_append_mx6ull = " firmware-imx-epdc"
> > -MACHINE_FIRMWARE_append_mx53 = " firmware-imx-vpu-imx53 firmware-
> > imx-sdma-imx53"
> > -MACHINE_FIRMWARE_append_mx51 = " firmware-imx-vpu-imx51 firmware-
> > imx-sdma-imx51"
> > -MACHINE_FIRMWARE_append_mx8mm = " linux-firmware-imx-sdma-imx7d"
> > -MACHINE_FIRMWARE_append_mx8mn = " linux-firmware-imx-sdma-imx7d"
> > -MACHINE_FIRMWARE_append_mx8mp = " linux-firmware-imx-sdma-imx7d
> > firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
> > -MACHINE_FIRMWARE_append_mx8mq = " linux-firmware-imx-sdma-imx7d"
> > -MACHINE_FIRMWARE_append_mx8qm = " firmware-imx-vpu-imx8"
> > -MACHINE_FIRMWARE_append_mx8qxp = " firmware-imx-vpu-imx8"
> > -MACHINE_FIRMWARE_append_use-mainline-bsp = " linux-firmware-imx-
> > sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q
> > firmware-imx-vpu-imx6d"
> > +MACHINE_FIRMWARE:append:mx25 = " firmware-imx-sdma-imx25"
> > +MACHINE_FIRMWARE:append:mx27 = " firmware-imx-vpu-imx27"
> > +MACHINE_FIRMWARE:append:mx7d = " linux-firmware-imx-sdma-imx7d
> > firmware-imx-epdc"
> > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-imx-sdma-imx6q"
> > +MACHINE_FIRMWARE:append:mx6q = " firmware-imx-vpu-imx6q"
> > +MACHINE_FIRMWARE:append:mx6dl = " firmware-imx-vpu-imx6d firmware-
> > imx-epdc"
> > +MACHINE_FIRMWARE:append:mx6sl = " firmware-imx-epdc"
> > +MACHINE_FIRMWARE:append:mx6sll = " firmware-imx-epdc"
> > +MACHINE_FIRMWARE:append:mx6ull = " firmware-imx-epdc"
> > +MACHINE_FIRMWARE:append:mx53 = " firmware-imx-vpu-imx53 firmware-
> > imx-sdma-imx53"
> > +MACHINE_FIRMWARE:append:mx51 = " firmware-imx-vpu-imx51 firmware-
> > imx-sdma-imx51"
> > +MACHINE_FIRMWARE:append:mx8mm = " linux-firmware-imx-sdma-imx7d"
> > +MACHINE_FIRMWARE:append:mx8mn = " linux-firmware-imx-sdma-imx7d"
> > +MACHINE_FIRMWARE:append:mx8mp = " linux-firmware-imx-sdma-imx7d
> > firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
> > +MACHINE_FIRMWARE:append:mx8mq = " linux-firmware-imx-sdma-imx7d"
> > +MACHINE_FIRMWARE:append:mx8qm = " firmware-imx-vpu-imx8"
> > +MACHINE_FIRMWARE:append:mx8qxp = " firmware-imx-vpu-imx8"
> > +MACHINE_FIRMWARE:append:use-mainline-bsp = " linux-firmware-imx-
> > sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q
> > firmware-imx-vpu-imx6d"
> >
> > MACHINE_EXTRA_RRECOMMENDS += "${MACHINE_FIRMWARE}"
> >
> > # Extra audio support
> > IMX_ALSA_EXTRA = ""
> > -IMX_ALSA_EXTRA_use-nxp-bsp = "imx-alsa-plugins"
> > -MACHINE_EXTRA_RRECOMMENDS_append_mx6 = "
> > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > '', d)}"
> > -MACHINE_EXTRA_RRECOMMENDS_append_mx7 = "
> > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > '', d)}"
> > -MACHINE_EXTRA_RRECOMMENDS_append_mx8 = "
> > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > '', d)}"
> > +IMX_ALSA_EXTRA:use-nxp-bsp = "imx-alsa-plugins"
> > +MACHINE_EXTRA_RRECOMMENDS:append:mx6 = "
> > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > '', d)}"
> > +MACHINE_EXTRA_RRECOMMENDS:append:mx7 = "
> > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > '', d)}"
> > +MACHINE_EXTRA_RRECOMMENDS:append:mx8 = "
> > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > '', d)}"
> >
> > # Extra Cypress Wi-Fi and BTW firmware (Murata)
> > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
> > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
> > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
> > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
> > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
> > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
> > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
> > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
> > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
> > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
> >
> > # Extra QCA Wi-Fi & BTE driver and firmware
> > -MACHINE_EXTRA_RRECOMMENDS_append = "
> > ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-
> > fsl-qca6174', '', d)}"
> > -MACHINE_EXTRA_RRECOMMENDS_append = "
> > ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-
> > fsl-qca9377', '', d)}"
> > +MACHINE_EXTRA_RRECOMMENDS:append = "
> > ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-
> > fsl-qca6174', '', d)}"
> > +MACHINE_EXTRA_RRECOMMENDS:append = "
> > ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-
> > fsl-qca9377', '', d)}"
> >
> > # Extra udev rules
> > MACHINE_EXTRA_RRECOMMENDS += "udev-rules-imx"
> > @@ -320,29 +320,29 @@ MACHINE_EXTRA_RRECOMMENDS += " \
> >
> > # GStreamer 1.0 plugins
> > MACHINE_GSTREAMER_1_0_PLUGIN ?= ""
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6dl ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6q ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6sl ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6sx ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6ul ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6ull ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx7d ?= "gstreamer1.0-plugins-imx-
> > meta"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mm ?= "imx-gst1.0-plugin"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mn ?= "imx-gst1.0-plugin"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mp ?= "imx-gst1.0-plugin"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mq ?= "imx-gst1.0-plugin"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8qm ?= "imx-gst1.0-plugin"
> > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8qxp ?= "imx-gst1.0-plugin"
> > -
> > -PREFERRED_VERSION_gstreamer1.0_mx8 ?= "1.16.2.imx"
> > -PREFERRED_VERSION_gstreamer1.0-plugins-base_mx8 ?= "1.16.2.imx"
> > -PREFERRED_VERSION_gstreamer1.0-plugins-good_mx8 ?= "1.16.3.imx"
> > -PREFERRED_VERSION_gstreamer1.0-plugins-bad_mx8 ?= "1.16.3.imx"
> > -PREFERRED_VERSION_gstreamer1.0-libav_mx8 ?= "1.16.0"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6dl ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6q ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6sl ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6sx ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6ul ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6ull ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx7d ?= "gstreamer1.0-plugins-imx-
> > meta"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mm ?= "imx-gst1.0-plugin"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mn ?= "imx-gst1.0-plugin"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mp ?= "imx-gst1.0-plugin"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mq ?= "imx-gst1.0-plugin"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8qm ?= "imx-gst1.0-plugin"
> > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8qxp ?= "imx-gst1.0-plugin"
> > +
> > +PREFERRED_VERSION_gstreamer1.0:mx8 ?= "1.16.2.imx"
> > +PREFERRED_VERSION_gstreamer1.0-plugins-base:mx8 ?= "1.16.2.imx"
> > +PREFERRED_VERSION_gstreamer1.0-plugins-good:mx8 ?= "1.16.3.imx"
> > +PREFERRED_VERSION_gstreamer1.0-plugins-bad:mx8 ?= "1.16.3.imx"
> > +PREFERRED_VERSION_gstreamer1.0-libav:mx8 ?= "1.16.0"
> >
> > # Determines if the SoC has support for Vivante kernel driver
> > SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT = "0"
> > -SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_imxgpu = "1"
> > +SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT:imxgpu = "1"
> >
> > # Handle Vivante kernel driver setting:
> > # 0 - machine does not have Vivante GPU driver support
> > @@ -355,59 +355,59 @@ PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
> > PREFERRED_PROVIDER_virtual/libgles1 ?= "mesa"
> > PREFERRED_PROVIDER_virtual/libgles2 ?= "mesa"
> >
> > -PREFERRED_PROVIDER_virtual/egl_imxgpu ?= "imx-gpu-viv"
> > -PREFERRED_PROVIDER_virtual/libgl_imxgpu3d ?= "imx-gpu-viv"
> > -PREFERRED_PROVIDER_virtual/libgles1_imxgpu3d ?= "imx-gpu-viv"
> > -PREFERRED_PROVIDER_virtual/libgles2_imxgpu3d ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_virtual/egl:imxgpu ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_virtual/libgl:imxgpu3d ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_virtual/libgles1:imxgpu3d ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_virtual/libgles2:imxgpu3d ?= "imx-gpu-viv"
> > PREFERRED_PROVIDER_virtual/libg2d ?= "imx-gpu-g2d"
> > -PREFERRED_PROVIDER_virtual/libg2d_imxdpu ?= "imx-dpu-g2d"
> > -PREFERRED_PROVIDER_opencl-clhpp_imxgpu ?= "imx-gpu-viv"
> > -PREFERRED_PROVIDER_opencl-headers_imxgpu ?= "imx-gpu-viv"
> > -PREFERRED_PROVIDER_opencl-icd-loader_imxgpu ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_virtual/libg2d:imxdpu ?= "imx-dpu-g2d"
> > +PREFERRED_PROVIDER_opencl-clhpp:imxgpu ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_opencl-headers:imxgpu ?= "imx-gpu-viv"
> > +PREFERRED_PROVIDER_opencl-icd-loader:imxgpu ?= "imx-gpu-viv"
> >
> > -PREFERRED_VERSION_weston_imx ?= "9.0.0.imx"
> > -PREFERRED_VERSION_weston_use-mainline-bsp = ""
> > +PREFERRED_VERSION_weston:imx ?= "9.0.0.imx"
> > +PREFERRED_VERSION_weston:use-mainline-bsp = ""
> >
> > -PREFERRED_VERSION_wayland-protocols_mx6 ?= "1.20.imx"
> > -PREFERRED_VERSION_wayland-protocols_mx7 ?= "1.20.imx"
> > -PREFERRED_VERSION_wayland-protocols_mx8 ?= "1.20.imx"
> > +PREFERRED_VERSION_wayland-protocols:mx6 ?= "1.20.imx"
> > +PREFERRED_VERSION_wayland-protocols:mx7 ?= "1.20.imx"
> > +PREFERRED_VERSION_wayland-protocols:mx8 ?= "1.20.imx"
> >
> > # Use i.MX libdrm Version
> > -PREFERRED_VERSION_libdrm_mx6 ?= "2.4.102.imx"
> > -PREFERRED_VERSION_libdrm_mx7 ?= "2.4.102.imx"
> > -PREFERRED_VERSION_libdrm_mx8 ?= "2.4.102.imx"
> > +PREFERRED_VERSION_libdrm:mx6 ?= "2.4.102.imx"
> > +PREFERRED_VERSION_libdrm:mx7 ?= "2.4.102.imx"
> > +PREFERRED_VERSION_libdrm:mx8 ?= "2.4.102.imx"
> >
> > # Use i.MX optee Version
> > -PREFERRED_VERSION_optee-os_mx8 ?= "3.10.0.imx"
> > -PREFERRED_VERSION_optee-client_mx8 ?= "3.10.0.imx"
> > -PREFERRED_VERSION_optee-test_mx8 ?= "3.10.0.imx"
> > +PREFERRED_VERSION_optee-os:mx8 ?= "3.10.0.imx"
> > +PREFERRED_VERSION_optee-client:mx8 ?= "3.10.0.imx"
> > +PREFERRED_VERSION_optee-test:mx8 ?= "3.10.0.imx"
> >
> > #Use i.MX opencv Version for mx8
> > -PREFERRED_VERSION_opencv_mx8 ?= "4.5.2.imx"
> > +PREFERRED_VERSION_opencv:mx8 ?= "4.5.2.imx"
> >
> > # Handle default kernel
> > IMX_DEFAULT_KERNEL = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mxs = "linux-fslc"
> > -IMX_DEFAULT_KERNEL_mx5 = "linux-fslc"
> > -IMX_DEFAULT_KERNEL_mx6 = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mx7 = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mx8 = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mx7ulp = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mx6sll = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mx6ul = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_mx6ull = "linux-fslc-imx"
> > -IMX_DEFAULT_KERNEL_use-mainline-bsp = "linux-fslc"
> > +IMX_DEFAULT_KERNEL:mxs = "linux-fslc"
> > +IMX_DEFAULT_KERNEL:mx5 = "linux-fslc"
> > +IMX_DEFAULT_KERNEL:mx6 = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:mx7 = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:mx8 = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:mx7ulp = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:mx6sll = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:mx6ul = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:mx6ull = "linux-fslc-imx"
> > +IMX_DEFAULT_KERNEL:use-mainline-bsp = "linux-fslc"
> >
> > PREFERRED_PROVIDER_virtual/kernel ??= "${IMX_DEFAULT_KERNEL}"
> >
> > SOC_DEFAULT_IMAGE_FSTYPES = "wic.bmap wic.gz"
> > -SOC_DEFAULT_IMAGE_FSTYPES_mxs = "uboot-mxsboot-sdcard wic.bmap
> > wic.gz"
> > +SOC_DEFAULT_IMAGE_FSTYPES:mxs = "uboot-mxsboot-sdcard wic.bmap
> > wic.gz"
> >
> > # Do not update fstab file when using wic images
> > WIC_CREATE_EXTRA_ARGS ?= "--no-fstab-update"
> >
> > OPTEE_BOOT_IMAGE = "uTee"
> > -OPTEE_BOOT_IMAGE_aarch64 = ""
> > +OPTEE_BOOT_IMAGE:aarch64 = ""
> >
> > IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
> >
> > @@ -419,7 +419,7 @@ IMAGE_BOOT_FILES ?= " \
> >
> > ### wic default support
> > OPTEE_WKS_FILE_DEPENDS = "optee-os"
> > -OPTEE_WKS_FILE_DEPENDS_aarch64 = ""
> > +OPTEE_WKS_FILE_DEPENDS:aarch64 = ""
> >
> > WKS_FILE_DEPENDS ?= " \
> > virtual/bootloader \
> > @@ -429,8 +429,8 @@ WKS_FILE_DEPENDS ?= " \
> > ${@bb.utils.contains('MACHINE_FEATURES', 'optee',
> > '${OPTEE_WKS_FILE_DEPENDS}', '', d)} \
> > "
> >
> > -WKS_FILE_DEPENDS_append_mx8 = " imx-boot"
> > -WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
> > +WKS_FILE_DEPENDS:append:mx8 = " imx-boot"
> > +WKS_FILE_DEPENDS:append:mx8m = " imx-boot"
> >
> > # We need to restrict the append so we don't add this for other i.MX
> > SoC's.
> > # Derivatives that are not yet adopted the usage of boot container
> > provided
> > @@ -444,15 +444,15 @@ WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
> > # deployment task extesion execution defined in imx-boot-container
> > class.
> > # For NXP BSP: rename is done in 'imx-boot' recipe at the execution
> > of compile
> > # task.
> > -WKS_FILE_DEPENDS_append_use-mainline-bsp_aarch64 = " \
> > +WKS_FILE_DEPENDS:append:use-mainline-bsp:aarch64 = " \
> > ${@oe.utils.ifelse(d.getVar('UBOOT_PROVIDES_BOOT_CONTAINER') ==
> > '0', 'imx-boot', '')} \
> > "
> >
> > SOC_DEFAULT_WKS_FILE ?= "imx-uboot-bootpart.wks.in"
> > -SOC_DEFAULT_WKS_FILE_mx8m ?= "imx-imx-boot-bootpart.wks.in"
> > +SOC_DEFAULT_WKS_FILE:mx8m ?= "imx-imx-boot-bootpart.wks.in"
> >
> > -SOC_DEFAULT_WKS_FILE_mx8 ?= "imx-imx-boot-bootpart.wks.in"
> > -SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-bootpart.wks.in"
> > +SOC_DEFAULT_WKS_FILE:mx8 ?= "imx-imx-boot-bootpart.wks.in"
> > +SOC_DEFAULT_WKS_FILE:mxs ?= "imx-uboot-mxs-bootpart.wks.in"
> >
> > # Boot container built as a part of mainline U-Boot uses different
> > WKS
> > # file as the entire mx8m series, as U-Boot versions later than
> > 2021.04 are
> > @@ -462,19 +462,19 @@ SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-
> > bootpart.wks.in"
> > # replacement of imx-boot from NXP.
> > # Creation of those binary files is controlled by
> > UBOOT_PROVIDES_BOOT_CONTAINER
> > # variable defined above.
> > -SOC_DEFAULT_WKS_FILE_imx-boot-container ?= "imx-boot-container-
> > bootpart.wks.in"
> > +SOC_DEFAULT_WKS_FILE:imx-boot-container ?= "imx-boot-container-
> > bootpart.wks.in"
> >
> > WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
> >
> > SERIAL_CONSOLES = "115200;ttymxc0"
> > -SERIAL_CONSOLES_mxs = "115200;ttyAMA0"
> > +SERIAL_CONSOLES:mxs = "115200;ttyAMA0"
> >
> > KERNEL_IMAGETYPE = "zImage"
> > -KERNEL_IMAGETYPE_aarch64 = "Image"
> > +KERNEL_IMAGETYPE:aarch64 = "Image"
> >
> > MACHINE_FEATURES = "usbgadget usbhost vfat alsa touchscreen"
> >
> > -# Add the ability to specify _imx machines
> > +# Add the ability to specify :imx machines
> > MACHINEOVERRIDES =. "imx:"
> >
> > -HOSTTOOLS_NONFATAL_append_mx8 = " sha384sum"
> > +HOSTTOOLS_NONFATAL:append:mx8 = " sha384sum"
> > diff --git a/conf/machine/include/imx8dxl-evk.inc
> > b/conf/machine/include/imx8dxl-evk.inc
> > index 2868b4d6c1c3..4e75f8c4bbd3 100644
> > --- a/conf/machine/include/imx8dxl-evk.inc
> > +++ b/conf/machine/include/imx8dxl-evk.inc
> > @@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
> > IMX_DEFAULT_BSP = "nxp"
> >
> > MACHINE_FEATURES += "pci bcm43455 bcm4356"
> > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> >
> > # Don't include kernels in standard images
> > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > @@ -23,7 +23,7 @@ USE_VT = "0"
> > KERNEL_DEVICETREE = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \
> > "
> >
> > diff --git a/conf/machine/include/imx8mm-evk.inc
> > b/conf/machine/include/imx8mm-evk.inc
> > index f458c56de9b7..1295de1d8271 100644
> > --- a/conf/machine/include/imx8mm-evk.inc
> > +++ b/conf/machine/include/imx8mm-evk.inc
> > @@ -11,19 +11,19 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43455
> > bcm4356"
> > # and pin it to NXP BSP only
> > # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to
> > have
> > # a full support for it yet.
> > -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359
> > qca9377"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359
> > qca9377"
> >
> > KERNEL_DEVICETREE = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-pcie-ep.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
> > "
> > UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
> >
> > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> >
> > UBOOT_SUFFIX = "bin"
> >
> > @@ -51,18 +51,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> > # to be used to define the boot process.
> > # We opt-in for Syslinux, since it is designated as a preferred
> > # distro boot mode according to the U-Boot documentation.
> > -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> > -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> > -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Mini EVK"
> > +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> > +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> > +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Mini EVK"
> >
> > -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M
> > Mini EVK"
> > -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp =
> > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp =
> > "console=${console}"
> > -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp =
> > "root=/dev/mmcblk1p2"
> > +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M
> > Mini EVK"
> > +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp =
> > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp =
> > "console=${console}"
> > +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp =
> > "root=/dev/mmcblk1p2"
> >
> > # Add extlinux.conf to the lis of files, which are deployed onto the
> > # boot partition
> > -IMAGE_BOOT_FILES_append_use-mainline-bsp = "
> > extlinux.conf;extlinux/extlinux.conf"
> > +IMAGE_BOOT_FILES:append:use-mainline-bsp = "
> > extlinux.conf;extlinux/extlinux.conf"
> >
> > LOADADDR = ""
> > UBOOT_SUFFIX = "bin"
> > @@ -73,4 +73,4 @@ OPTEE_BIN_EXT = "8mm"
> > TEE_LOAD_ADDR = "0xbe000000"
> >
> > # Add additional firmware
> > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > diff --git a/conf/machine/include/imx8mn-evk.inc
> > b/conf/machine/include/imx8mn-evk.inc
> > index a0e39857c770..411004000b66 100644
> > --- a/conf/machine/include/imx8mn-evk.inc
> > +++ b/conf/machine/include/imx8mn-evk.inc
> > @@ -8,12 +8,12 @@ MACHINE_FEATURES += "wifi bluetooth bcm43455
> > bcm4356"
> > # NXP BSP can consume proprietary jailhouse and Broadcom drivers
> > # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to
> > have
> > # a full support for it yet.
> > -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359"
> >
> > KERNEL_DEVICETREE = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-ak5558.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
> > @@ -22,8 +22,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > "
> > UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
> >
> > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> >
> > UBOOT_SUFFIX = "bin"
> >
> > @@ -52,18 +52,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> > # to be used to define the boot process.
> > # We opt-in for Syslinux, since it is designated as a preferred
> > # distro boot mode according to the U-Boot documentation.
> > -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> > -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> > -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Nano EVK"
> > +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> > +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> > +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Nano EVK"
> >
> > -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M
> > Nano EVK"
> > -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp =
> > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp =
> > "console=${console}"
> > -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp =
> > "root=/dev/mmcblk1p2"
> > +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M
> > Nano EVK"
> > +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp =
> > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp =
> > "console=${console}"
> > +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp =
> > "root=/dev/mmcblk1p2"
> >
> > # Add extlinux.conf to the lis of files, which are deployed onto the
> > # boot partition
> > -IMAGE_BOOT_FILES_append_use-mainline-bsp = "
> > extlinux.conf;extlinux/extlinux.conf"
> > +IMAGE_BOOT_FILES:append:use-mainline-bsp = "
> > extlinux.conf;extlinux/extlinux.conf"
> >
> > BOOT_SPACE = "65536"
> > LOADADDR = ""
> > @@ -79,4 +79,4 @@ OPTEE_BIN_EXT = "8mn"
> > TEE_LOAD_ADDR = "0x56000000"
> >
> > # Add additional firmware
> > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > diff --git a/conf/machine/include/imx8mp-evk.inc
> > b/conf/machine/include/imx8mp-evk.inc
> > index d070831ff3d3..bc2c038f0076 100644
> > --- a/conf/machine/include/imx8mp-evk.inc
> > +++ b/conf/machine/include/imx8mp-evk.inc
> > @@ -8,7 +8,7 @@ MACHINE_FEATURES += "pci wifi bluetooth"
> > # NXP BSP can consume proprietary jailhouse and Marvell drivers
> > # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to
> > have
> > # a full support for it yet.
> > -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse mrvl8997"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse mrvl8997"
> >
> > # Mainline kernel contains only one DTB file for
> > # imx8mpevk machine
> > @@ -18,8 +18,8 @@ KERNEL_DEVICETREE = " \
> >
> > UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
> >
> > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> >
> > UBOOT_SUFFIX = "bin"
> >
> > @@ -50,18 +50,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> > # to be used to define the boot process.
> > # We opt-in for Syslinux, since it is designated as a preferred
> > # distro boot mode according to the U-Boot documentation.
> > -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> > -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> > -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Plus EVK"
> > +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> > +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> > +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Plus EVK"
> >
> > -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M
> > Plus EVK"
> > -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp =
> > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp =
> > "console=${console}"
> > -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp =
> > "root=/dev/mmcblk1p2"
> > +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M
> > Plus EVK"
> > +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp =
> > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp =
> > "console=${console}"
> > +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp =
> > "root=/dev/mmcblk1p2"
> >
> > # Add extlinux.conf to the lis of files, which are deployed onto the
> > # boot partition
> > -IMAGE_BOOT_FILES_append_use-mainline-bsp = "
> > extlinux.conf;extlinux/extlinux.conf"
> > +IMAGE_BOOT_FILES:append:use-mainline-bsp = "
> > extlinux.conf;extlinux/extlinux.conf"
> >
> > LOADADDR = ""
> > UBOOT_SUFFIX = "bin"
> > @@ -72,4 +72,4 @@ OPTEE_BIN_EXT = "8mp"
> > TEE_LOAD_ADDR = "0x56000000"
> >
> > # Add additional firmware
> > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > diff --git a/conf/machine/include/imx8x-mek.inc
> > b/conf/machine/include/imx8x-mek.inc
> > index 55a28c877e60..0682fbc1be21 100644
> > --- a/conf/machine/include/imx8x-mek.inc
> > +++ b/conf/machine/include/imx8x-mek.inc
> > @@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
> > IMX_DEFAULT_BSP = "nxp"
> >
> > MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
> > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> >
> > # Don't include kernels in standard images
> > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > @@ -23,7 +23,7 @@ USE_VT = "0"
> > KERNEL_DEVICETREE = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > "
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191-rpmsg.dtb \
> > freescale/${KERNEL_DEVICETREE_BASENAME}-dsp.dtb \
> > @@ -71,4 +71,4 @@ IMXBOOT_TARGETS = \
> > BOARD_TYPE = "mek"
> >
> > # Add additional firmware
> > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > diff --git a/conf/machine/include/qoriq-base.inc
> > b/conf/machine/include/qoriq-base.inc
> > index 0a42160f0f30..9bc3ee76c756 100644
> > --- a/conf/machine/include/qoriq-base.inc
> > +++ b/conf/machine/include/qoriq-base.inc
> > @@ -9,8 +9,8 @@ PREFERRED_PROVIDER_nativesdk-u-boot-mkimage ??=
> > "nativesdk-u-boot-tools"
> > PREFERRED_VERSION_testfloat = "2a"
> >
> > SOC_DEFAULT_IMAGE_FSTYPES = "tar.gz"
> > -SOC_DEFAULT_IMAGE_FSTYPES_append_ls1043a = " wic.bz2"
> > -SOC_DEFAULT_IMAGE_FSTYPES_append_ls1046a = " wic.bz2"
> > +SOC_DEFAULT_IMAGE_FSTYPES:append:ls1043a = " wic.bz2"
> > +SOC_DEFAULT_IMAGE_FSTYPES:append:ls1046a = " wic.bz2"
> > IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
> >
> > # Composite Image Layout (in KBytes)
> > @@ -31,8 +31,8 @@ IMAGE_BOOT_FILES ?= " \
> > "
> >
> > SOC_DEFAULT_WKS_FILE ?= ""
> > -SOC_DEFAULT_WKS_FILE_ls1043a ?= "ls104x-uboot-bootpart.wks.in"
> > -SOC_DEFAULT_WKS_FILE_ls1046a ?= "ls104x-uboot-bootpart.wks.in"
> > +SOC_DEFAULT_WKS_FILE:ls1043a ?= "ls104x-uboot-bootpart.wks.in"
> > +SOC_DEFAULT_WKS_FILE:ls1046a ?= "ls104x-uboot-bootpart.wks.in"
> >
> > WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
> >
> > diff --git a/conf/machine/include/utilities.inc
> > b/conf/machine/include/utilities.inc
> > index f11b588bbe5d..34ce7abcb6d7 100644
> > --- a/conf/machine/include/utilities.inc
> > +++ b/conf/machine/include/utilities.inc
> > @@ -23,6 +23,6 @@ def make_dtb_boot_files(d):
> >
> > def get_spl_binary(d):
> > imx_default_bootloader = d.get('IMX_DEFAULT_BOOTLOADER')
> > - spl_binary = d.getVar("SPL_BINARY_pn-%s" %
> > imx_default_bootloader)
> > + spl_binary = d.getVar("SPL_BINARY:pn-%s" %
> > imx_default_bootloader)
> >
> > return spl_binary or ""
> > diff --git a/conf/machine/ls1028ardb.conf
> > b/conf/machine/ls1028ardb.conf
> > index 63f3802f7959..d70a5a619f9b 100644
> > --- a/conf/machine/ls1028ardb.conf
> > +++ b/conf/machine/ls1028ardb.conf
> > @@ -22,7 +22,7 @@ UBOOT_CONFIG[tfa-secure-boot] =
> > "ls1028ardb_tfa_SECURE_BOOT_defconfig"
> > UBOOT_CONFIG[tfa] = "ls1028ardb_tfa_defconfig"
> >
> > KERNEL_DEVICETREE ?= "freescale/fsl-ls1028a-rdb.dtb freescale/fsl-
> > ls1028a-qds.dtb"
> > -KERNEL_DEVICETREE_append_use-nxp-bsp = "\
> > +KERNEL_DEVICETREE:append:use-nxp-bsp = "\
> > freescale/fsl-ls1028a-rdb-dpdk.dtb \
> > "
> > KERNEL_DEFCONFIG ?= "defconfig"
> > diff --git a/conf/machine/ls1043ardb.conf
> > b/conf/machine/ls1043ardb.conf
> > index fa8ab61566c7..4ff3c0acb913 100644
> > --- a/conf/machine/ls1043ardb.conf
> > +++ b/conf/machine/ls1043ardb.conf
> > @@ -27,7 +27,7 @@ KERNEL_DEVICETREE ?= "\
> > freescale/fsl-ls1043a-qds.dtb \
> > "
> > # usdpaa dtb is used for dpdk. TODO: rename in kernel
> > -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> > +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> > freescale/fsl-ls1043a-rdb-sdk.dtb \
> > freescale/fsl-ls1043a-rdb-usdpaa.dtb \
> > freescale/fsl-ls1043a-qds-sdk.dtb \
> > diff --git a/conf/machine/ls1046afrwy.conf
> > b/conf/machine/ls1046afrwy.conf
> > index e6eabc0f36df..eb3c0bb6f4a5 100644
> > --- a/conf/machine/ls1046afrwy.conf
> > +++ b/conf/machine/ls1046afrwy.conf
> > @@ -25,7 +25,7 @@ KERNEL_DEVICETREE ?= "\
> > freescale/fsl-ls1046a-frwy.dtb \
> > "
> > # usdpaa dtb is used for dpdk. TODO: rename in kernel
> > -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> > +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> > freescale/fsl-ls1046a-frwy-sdk.dtb \
> > freescale/fsl-ls1046a-frwy-usdpaa.dtb \
> > "
> > diff --git a/conf/machine/ls1046ardb.conf
> > b/conf/machine/ls1046ardb.conf
> > index 97fb1e29e36a..8e815295ad4c 100644
> > --- a/conf/machine/ls1046ardb.conf
> > +++ b/conf/machine/ls1046ardb.conf
> > @@ -26,7 +26,7 @@ KERNEL_DEVICETREE ?= "\
> > freescale/fsl-ls1046a-qds.dtb \
> > "
> > # usdpaa dtb is used for dpdk. TODO: rename in kernel
> > -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> > +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> > freescale/fsl-ls1046a-rdb-sdk.dtb \
> > freescale/fsl-ls1046a-rdb-usdpaa.dtb \
> > freescale/fsl-ls1046a-qds-sdk.dtb \
> > diff --git a/dynamic-layers/aglprofilegraphical/recipes-
> > graphics/wayland/weston-init.bbappend b/dynamic-
> > layers/aglprofilegraphical/recipes-graphics/wayland/weston-
> > init.bbappend
> > index 10b66c0e4adc..b7bf3298f6ff 100644
> > --- a/dynamic-layers/aglprofilegraphical/recipes-
> > graphics/wayland/weston-init.bbappend
> > +++ b/dynamic-layers/aglprofilegraphical/recipes-
> > graphics/wayland/weston-init.bbappend
> > @@ -1,3 +1,3 @@
> > -do_install_append() {
> > +do_install:append() {
> > rm -f ${D}${sysconfdir}/xdg/weston/weston.ini
> > }
> > diff --git a/dynamic-layers/chromium-browser-layer/recipes-
> > browser/chromium/chromium-imx.inc b/dynamic-layers/chromium-browser-
> > layer/recipes-browser/chromium/chromium-imx.inc
> > index cdd0f08fde77..7d8065f9db46 100644
> > --- a/dynamic-layers/chromium-browser-layer/recipes-
> > browser/chromium/chromium-imx.inc
> > +++ b/dynamic-layers/chromium-browser-layer/recipes-
> > browser/chromium/chromium-imx.inc
> > @@ -1,4 +1,4 @@
> > -DEPENDS_append_imxvpu = " imx-vpuwrap"
> > +DEPENDS:append:imxvpu = " imx-vpuwrap"
> >
> > # Additional imx code and patches are included in the chromium-imx
> > git repository.
> > # The code below fetches this repository, copies the extra source
> > over to the main
> > @@ -26,7 +26,7 @@ do_patch[prefuncs] =+ "add_chromium_imx_patches"
> > # * Lost context problems are not known to happen with Vivante GPUs,
> > # so it is safe to use ignore-lost-context
> > # * Proprietary codecs need to be enabled for h.264 and MP4 support
> > -PACKAGECONFIG_append = " ignore-lost-context proprietary-codecs"
> > +PACKAGECONFIG:append = " ignore-lost-context proprietary-codecs"
> >
> > copy_chromium_imx_files() {
> > # sources in src/ are already organized in a manner
> > diff --git a/dynamic-layers/gnome-layer/recipes-
> > graphics/clutter/clutter-1.0_%.bbappend b/dynamic-layers/gnome-
> > layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
> > index 0b4c4861b6e3..fb90c73e1d1f 100644
> > --- a/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-
> > 1.0_%.bbappend
> > +++ b/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-
> > 1.0_%.bbappend
> > @@ -1,4 +1,4 @@
> > -PACKAGECONFIG_imxgpu3d ??= " \
> > +PACKAGECONFIG:imxgpu3d ??= " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland
> > egl', \
> > bb.utils.contains('DISTRO_FEATURES', 'x11', 'glx x11', \
> > '', d), d)} \
> > diff --git a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-
> > 1.0_%.bbappend b/dynamic-layers/gnome-layer/recipes-
> > graphics/cogl/cogl-1.0_%.bbappend
> > index afbaee4323ad..e07d0d54235a 100644
> > --- a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-
> > 1.0_%.bbappend
> > +++ b/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-
> > 1.0_%.bbappend
> > @@ -1,4 +1,4 @@
> > -PACKAGECONFIG_imxgpu3d ??= " \
> > +PACKAGECONFIG:imxgpu3d ??= " \
> > cogl-pango gles2 \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'egl-
> > wayland', \
> > bb.utils.contains('DISTRO_FEATURES', 'x11', 'egl-x11', \
> > diff --git a/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > init.bbappend b/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > init.bbappend
> > index 72d991c7e590..4fc41d058011 100644
> > --- a/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > init.bbappend
> > +++ b/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > init.bbappend
> > @@ -1 +1 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > benchmark/glmark2/glmark2_%.bbappend b/dynamic-layers/openembedded-
> > layer/recipes-benchmark/glmark2/glmark2_%.bbappend
> > index 2e648ba34914..06661133569f 100644
> > --- a/dynamic-layers/openembedded-layer/recipes-
> > benchmark/glmark2/glmark2_%.bbappend
> > +++ b/dynamic-layers/openembedded-layer/recipes-
> > benchmark/glmark2/glmark2_%.bbappend
> > @@ -1,4 +1,4 @@
> > -# Only _mx8 machine do provide virtual/libgbm required for any drm*
> > flavour
> > -DRM-REMOVE_imxgpu = "drm-gl drm-gles2"
> > -DRM-REMOVE_imxgpu_mx8 = ""
> > -PACKAGECONFIG_remove = "${DRM-REMOVE}"
> > +# Only :mx8 machine do provide virtual/libgbm required for any drm*
> > flavour
> > +DRM-REMOVE:imxgpu = "drm-gl drm-gles2"
> > +DRM-REMOVE:imxgpu:mx8 = ""
> > +PACKAGECONFIG:remove = "${DRM-REMOVE}"
> > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > devtools/luajit/luajit_%.bbappend b/dynamic-layers/openembedded-
> > layer/recipes-devtools/luajit/luajit_%.bbappend
> > index 8c6138c54aae..d07f8ae14d2c 100644
> > --- a/dynamic-layers/openembedded-layer/recipes-
> > devtools/luajit/luajit_%.bbappend
> > +++ b/dynamic-layers/openembedded-layer/recipes-
> > devtools/luajit/luajit_%.bbappend
> > @@ -1,4 +1,4 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> >
> > -SRC_URI_append_qoriq-ppc = " file://ppc-fixplt.patch "
> > +SRC_URI:append:qoriq-ppc = " file://ppc-fixplt.patch "
> >
> > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > dpaa/fmc/fmc_git.bb b/dynamic-layers/openembedded-layer/recipes-
> > dpaa/fmc/fmc_git.bb
> > index 1793ec06fb4e..9c6be782d6d0 100644
> > --- a/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> > +++ b/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> > @@ -19,15 +19,15 @@ EXTRA_OEMAKE_virtclass-native = 'FMCHOSTMODE=1
> > FMD_USPACE_HEADER_PATH="${STAGING
> > TCLAP_HEADER_PATH="${STAGING_INCDIR}" '
> >
> > EXTRA_OEMAKE_PLATFORM ?= ""
> > -EXTRA_OEMAKE_PLATFORM_ls1043a = "ls1043"
> > -EXTRA_OEMAKE_PLATFORM_ls1046a = "ls1046"
> > -EXTRA_OEMAKE_PLATFORM_ls1088a = "ls1088"
> > -EXTRA_OEMAKE_PLATFORM_p1020 = "p4080ds"
> > -EXTRA_OEMAKE_PLATFORM_p2020 = "p4080ds"
> > -EXTRA_OEMAKE_PLATFORM_p2041 = "p4080ds"
> > -EXTRA_OEMAKE_PLATFORM_p3041 = "p4080ds"
> > -EXTRA_OEMAKE_PLATFORM_p4080 = "p4080ds"
> > -EXTRA_OEMAKE_PLATFORM_p5040 = "p4080ds"
> > +EXTRA_OEMAKE_PLATFORM:ls1043a = "ls1043"
> > +EXTRA_OEMAKE_PLATFORM:ls1046a = "ls1046"
> > +EXTRA_OEMAKE_PLATFORM:ls1088a = "ls1088"
> > +EXTRA_OEMAKE_PLATFORM:p1020 = "p4080ds"
> > +EXTRA_OEMAKE_PLATFORM:p2020 = "p4080ds"
> > +EXTRA_OEMAKE_PLATFORM:p2041 = "p4080ds"
> > +EXTRA_OEMAKE_PLATFORM:p3041 = "p4080ds"
> > +EXTRA_OEMAKE_PLATFORM:p4080 = "p4080ds"
> > +EXTRA_OEMAKE_PLATFORM:p5040 = "p4080ds"
> >
> >
> > do_compile () {
> > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > graphics/xserver-common/xserver-common_%.bbappend b/dynamic-
> > layers/openembedded-layer/recipes-graphics/xserver-common/xserver-
> > common_%.bbappend
> > index f4f4350489cf..be6945744efa 100644
> > --- a/dynamic-layers/openembedded-layer/recipes-graphics/xserver-
> > common/xserver-common_%.bbappend
> > +++ b/dynamic-layers/openembedded-layer/recipes-graphics/xserver-
> > common/xserver-common_%.bbappend
> > @@ -1,8 +1,8 @@
> > # i.MX extra configuration
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> >
> > -SRC_URI_append_imxgpu3d = " \
> > +SRC_URI:append:imxgpu3d = " \
> > file://0016-xserver-common-enable-iglx-module.patch \
> > "
> >
> > -PACKAGE_ARCH_imxgpu3d = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:imxgpu3d = "${MACHINE_SOCARCH}"
> > diff --git a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-
> > support.inc b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-
> > support.inc
> > index 187681a8b123..8950c151bd77 100644
> > --- a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> > +++ b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> > @@ -1,4 +1,4 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/qt4:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/qt4:"
> >
> > python __anonymous () {
> > families = ['mx6']
> > @@ -8,21 +8,21 @@ python __anonymous () {
> > d.appendVarFlag('do_configure', 'depends', '
> > virtual/kernel:do_shared_workdir')
> > }
> >
> > -SRC_URI_append_imxgpu2d += " \
> > +SRC_URI:append:imxgpu2d += " \
> > file://0001-Add-support-for-i.MX-codecs-to-phonon.patch \
> >
> > file://0002-i.MX-video-renderer-Allow-v4l-device-from-environmen.patch
> > \
> > file://0003-i.MX6-force-egl-visual-ID-33.patch \
> > "
> >
> > -DEPENDS_append_imxgpu2d = " virtual/kernel virtual/libgles2"
> > -QT_GLFLAGS_imxgpu2d = "-opengl es2 -openvg"
> > -QT_CONFIG_FLAGS_append_imxgpu2d = " -
> > I${STAGING_KERNEL_DIR}/include/uapi \
> > +DEPENDS:append:imxgpu2d = " virtual/kernel virtual/libgles2"
> > +QT_GLFLAGS:imxgpu2d = "-opengl es2 -openvg"
> > +QT_CONFIG_FLAGS:append:imxgpu2d = " -
> > I${STAGING_KERNEL_DIR}/include/uapi \
> > -I${STAGING_KERNEL_DIR}/include/ \
> > -DLINUX=1 -DEGL_API_FB=1 \
> > -DQT_QPA_EXPERIMENTAL_TOUCHEVENT=1"
> >
> > # The QT_CONFIG_FLAGS can pollute *.la files with -Dxxx
> > -do_compile_append_mx6 () {
> > +do_compile:append:mx6 () {
> > find lib -name "*.la" | xargs -n1 sed -i 's/-D.*=1//g'
> > }
> >
> > diff --git a/dynamic-layers/qt5-layer/recipes-
> > qt/qt5/qtbase_%.bbappend b/dynamic-layers/qt5-layer/recipes-
> > qt/qt5/qtbase_%.bbappend
> > index bf3fb66eeb72..0d5897adc7f9 100644
> > --- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> > +++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> > @@ -3,35 +3,35 @@
> > # Copyright (C) 2016, 2017 O.S. Systems Software LTDA.
> > # Copyright (C) 2017-2018 NXP
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> >
> > -SRC_URI_append_imxgpu = " \
> > +SRC_URI:append:imxgpu = " \
> > file://0014-Add-IMX-GPU-support.patch \
> >
> > file://0001-egl.prf-Fix-build-error-when-egl-headers-need-platfo.patch
> > \
> > "
> >
> > PACKAGECONFIG_GL_IMX_GPU = ""
> > -PACKAGECONFIG_GL_IMX_GPU_mx8 = "gbm kms"
> > +PACKAGECONFIG_GL_IMX_GPU:mx8 = "gbm kms"
> >
> > -PACKAGECONFIG_GL_imxpxp = "gles2"
> > -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'x11', ' gl', '', d)} \
> > +PACKAGECONFIG_GL:imxpxp = "gles2"
> > +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'x11', ' gl', '', d)} \
> > ${PACKAGECONFIG_GL_IMX_GPU}"
> > -PACKAGECONFIG_GL_imxgpu3d = "gles2 \
> > +PACKAGECONFIG_GL:imxgpu3d = "gles2 \
> > ${PACKAGECONFIG_GL_IMX_GPU}"
> > -PACKAGECONFIG_GL_use-mainline-bsp ?= "gles2 gbm kms"
> > +PACKAGECONFIG_GL:use-mainline-bsp ?= "gles2 gbm kms"
> >
> > PACKAGECONFIG_PLATFORM = ""
> > -PACKAGECONFIG_PLATFORM_imxgpu2d = "no-opengl linuxfb"
> > -PACKAGECONFIG_PLATFORM_imxgpu3d = " \
> > +PACKAGECONFIG_PLATFORM:imxgpu2d = "no-opengl linuxfb"
> > +PACKAGECONFIG_PLATFORM:imxgpu3d = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', \
> > bb.utils.contains('DISTRO_FEATURES', 'wayland', '', \
> > 'eglfs', d),
> > d)}"
> > -PACKAGECONFIG_PLATFORM_use-mainline-bsp =
> > "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
> > +PACKAGECONFIG_PLATFORM:use-mainline-bsp =
> > "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
> > PACKAGECONFIG += "${PACKAGECONFIG_PLATFORM}"
> >
> > PACKAGECONFIG_VULKAN_IMX_GPU = ""
> > -PACKAGECONFIG_VULKAN_IMX_GPU_mx8 = "vulkan"
> > -PACKAGECONFIG_VULKAN_IMX_GPU_mx8mm = ""
> > +PACKAGECONFIG_VULKAN_IMX_GPU:mx8 = "vulkan"
> > +PACKAGECONFIG_VULKAN_IMX_GPU:mx8mm = ""
> > PACKAGECONFIG_VULKAN = ""
> > -PACKAGECONFIG_VULKAN_imxgpu =
> > "${PACKAGECONFIG_VULKAN_IMX_GPU}"
> > +PACKAGECONFIG_VULKAN:imxgpu =
> > "${PACKAGECONFIG_VULKAN_IMX_GPU}"
> > PACKAGECONFIG += "${@bb.utils.contains('DISTRO_FEATURES', 'vulkan',
> > '${PACKAGECONFIG_VULKAN}', '', d)}"
> > diff --git a/dynamic-layers/qt5-layer/recipes-
> > qt/qt5/qtwayland_%.bbappend b/dynamic-layers/qt5-layer/recipes-
> > qt/qt5/qtwayland_%.bbappend
> > index 168db09548ab..c1594e0571b4 100644
> > --- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> > +++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> > @@ -1,8 +1,8 @@
> > # etnaviv mesa does not have glx
> > -PACKAGECONFIG_remove_use-mainline-bsp = "xcomposite-glx"
> > +PACKAGECONFIG:remove:use-mainline-bsp = "xcomposite-glx"
> >
> > -PACKAGECONFIG_remove_mx6 = "xcomposite-egl xcomposite-glx"
> > -PACKAGECONFIG_remove_mx7 = "xcomposite-egl xcomposite-glx"
> > +PACKAGECONFIG:remove:mx6 = "xcomposite-egl xcomposite-glx"
> > +PACKAGECONFIG:remove:mx7 = "xcomposite-egl xcomposite-glx"
> >
> > # i.MX8 does never provide native x11, so required dependencies are
> > not met
> > -PACKAGECONFIG_remove_mx8 = "xcomposite-egl xcomposite-glx"
> > +PACKAGECONFIG:remove:mx8 = "xcomposite-egl xcomposite-glx"
> > diff --git a/dynamic-layers/virtualization-layer/recipes-
> > extended/libvirt/libvirt_%.bbappend b/dynamic-layers/virtualization-
> > layer/recipes-extended/libvirt/libvirt_%.bbappend
> > index c7e6d32e4213..7aecf1e466c6 100644
> > --- a/dynamic-layers/virtualization-layer/recipes-
> > extended/libvirt/libvirt_%.bbappend
> > +++ b/dynamic-layers/virtualization-layer/recipes-
> > extended/libvirt/libvirt_%.bbappend
> > @@ -1,9 +1,9 @@
> > PACKAGECONFIG_qoriq-ppc = "qemu yajl lxc test remote macvtap
> > libvirtd netcf udev python"
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > -SRC_URI_append_qoriq-ppc = " file://qemu.conf"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > +SRC_URI:append:qoriq-ppc = " file://qemu.conf"
> >
> > -do_install_append_qoriq-ppc() {
> > +do_install:append:qoriq-ppc() {
> > install -m 0644 ${WORKDIR}/qemu.conf
> > ${D}${sysconfdir}/libvirt/qemu.conf
> > }
> >
> > diff --git a/recipes-bsp/alsa-state/alsa-state.bbappend b/recipes-
> > bsp/alsa-state/alsa-state.bbappend
> > index 3a398b2210fc..9433130725d5 100644
> > --- a/recipes-bsp/alsa-state/alsa-state.bbappend
> > +++ b/recipes-bsp/alsa-state/alsa-state.bbappend
> > @@ -1,10 +1,10 @@
> > # Append path for freescale layer to include alsa-state asound.conf
> > -FILESEXTRAPATHS_prepend_mx6 := "${THISDIR}/${PN}/imx:"
> > -FILESEXTRAPATHS_prepend_mx7 := "${THISDIR}/${PN}/imx:"
> > -FILESEXTRAPATHS_prepend_mx8 := "${THISDIR}/${PN}/imx:"
> > -FILESEXTRAPATHS_prepend_use-mainline-bsp := "${THISDIR}/${PN}/imx:"
> > +FILESEXTRAPATHS:prepend:mx6 := "${THISDIR}/${PN}/imx:"
> > +FILESEXTRAPATHS:prepend:mx7 := "${THISDIR}/${PN}/imx:"
> > +FILESEXTRAPATHS:prepend:mx8 := "${THISDIR}/${PN}/imx:"
> > +FILESEXTRAPATHS:prepend:use-mainline-bsp := "${THISDIR}/${PN}/imx:"
> >
> > -PACKAGE_ARCH_mx6 = "${MACHINE_ARCH}"
> > -PACKAGE_ARCH_mx7 = "${MACHINE_ARCH}"
> > -PACKAGE_ARCH_mx8 = "${MACHINE_ARCH}"
> > -PACKAGE_ARCH_use-mainline-bsp = "${MACHINE_ARCH}"
> > +PACKAGE_ARCH:mx6 = "${MACHINE_ARCH}"
> > +PACKAGE_ARCH:mx7 = "${MACHINE_ARCH}"
> > +PACKAGE_ARCH:mx8 = "${MACHINE_ARCH}"
> > +PACKAGE_ARCH:use-mainline-bsp = "${MACHINE_ARCH}"
> > diff --git a/recipes-bsp/atf/qoriq-atf_1.5.bb b/recipes-
> > bsp/atf/qoriq-atf_1.5.bb
> > index 192083348ea9..b03a6bcb95f5 100644
> > --- a/recipes-bsp/atf/qoriq-atf_1.5.bb
> > +++ b/recipes-bsp/atf/qoriq-atf_1.5.bb
> > @@ -8,7 +8,7 @@ PV = "1.5+git${SRCPV}"
> > inherit deploy
> >
> > DEPENDS += "u-boot-mkimage-native u-boot openssl openssl-native
> > mbedtls rcw cst-native"
> > -DEPENDS_append_lx2160a = " ddr-phy"
> > +DEPENDS:append:lx2160a = " ddr-phy"
> > do_compile[depends] += "u-boot:do_deploy rcw:do_deploy
> > uefi:do_deploy"
> >
> > S = "${WORKDIR}/git"
> > @@ -21,12 +21,12 @@ COMPATIBLE_MACHINE = "(qoriq)"
> > PACKAGE_ARCH = "${MACHINE_ARCH}"
> >
> > PLATFORM = "${MACHINE}"
> > -PLATFORM_ls1088ardb-pb = "ls1088ardb"
> > +PLATFORM:ls1088ardb-pb = "ls1088ardb"
> > PLATFORM_ADDITIONAL_TARGET ??= ""
> > -PLATFORM_ADDITIONAL_TARGET_ls1012afrwy = "ls1012afrwy_512mb"
> > +PLATFORM_ADDITIONAL_TARGET:ls1012afrwy = "ls1012afrwy_512mb"
> >
> > RCW_FOLDER ?= "${MACHINE}"
> > -RCW_FOLDER_ls1088ardb-pb = "ls1088ardb"
> > +RCW_FOLDER:ls1088ardb-pb = "ls1088ardb"
> >
> > # requires CROSS_COMPILE set by hand as there is no configure script
> > export CROSS_COMPILE="${TARGET_PREFIX}"
> > @@ -56,16 +56,16 @@ PACKAGECONFIG[optee] = ",,optee-os-qoriq"
> > uboot_boot_sec ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa-secure-boot"
> > uboot_boot ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa"
> > rcw ?= ""
> > -rcw_ls1012a = "_default"
> > +rcw:ls1012a = "_default"
> > rcwsec ?= "_sben"
> >
> > chassistype ?= "ls2088_1088"
> > -chassistype_ls1012a = "ls104x_1012"
> > -chassistype_ls1043a = "ls104x_1012"
> > -chassistype_ls1046a = "ls104x_1012"
> > +chassistype:ls1012a = "ls104x_1012"
> > +chassistype:ls1043a = "ls104x_1012"
> > +chassistype:ls1046a = "ls104x_1012"
> >
> > ddrphyopt ?= ""
> > -ddrphyopt_lx2160a = "fip_ddr_sec"
> > +ddrphyopt:lx2160a = "fip_ddr_sec"
> >
> > do_configure[noexec] = "1"
> >
> > diff --git a/recipes-bsp/atf/qoriq-atf_2.3.bb b/recipes-
> > bsp/atf/qoriq-atf_2.3.bb
> > index aed32851bc42..2698bd32a99c 100644
> > --- a/recipes-bsp/atf/qoriq-atf_2.3.bb
> > +++ b/recipes-bsp/atf/qoriq-atf_2.3.bb
> > @@ -47,7 +47,7 @@ do_compile() {
> > if [ "${NXP_COT}" = "true" -a "${ARM_COT}" = "true" ]; then
> > bbfatal " \
> > Error!, Both ARM CoT and NXP CoT are enabled. Only one CoT
> > is built in a yocto build, \
> > - Don't add nxp-cot and arm-cot into DISTRO_FEATURES_append at
> > the same time."
> > + Don't add nxp-cot and arm-cot into DISTRO_FEATURES:append at
> > the same time."
> > fi
> >
> > if [ "${NXP_COT}" = "true" ]; then
> > diff --git a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > index 650c1cfded61..6ea16d5be67a 100644
> > --- a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > +++ b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > @@ -19,5 +19,5 @@ addtask deploy after do_install before do_build
> > PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> >
> > COMPATIBLE_MACHINE = "(mx8)"
> > -COMPATIBLE_MACHINE_mx8m = "(^$)"
> > -COMPATIBLE_MACHINE_mx8x = "(^$)"
> > +COMPATIBLE_MACHINE:mx8m = "(^$)"
> > +COMPATIBLE_MACHINE:mx8x = "(^$)"
> > diff --git a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb b/recipes-
> > bsp/firmware-imx/firmware-imx_8.12.bb
> > index 8ff4a3216060..34040b287de7 100644
> > --- a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> > +++ b/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> > @@ -65,7 +65,7 @@ do_install() {
> > # as second one, and for every file match - it creates a separate
> > package,
> > # which contains only files that matches the pattern.
> > #
> > -python populate_packages_prepend() {
> > +python populate_packages:prepend() {
> > easrcdir =
> > bb.data.expand('${nonarch_base_libdir}/firmware/imx/easrc', d)
> > do_split_packages(d, easrcdir, '^easrc-([^_]*).*\.bin',
> > output_pattern='firmware-imx-easrc-%s',
> > diff --git a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb b/recipes-
> > bsp/firmware-qca/qca-tools_3.0.2.bb
> > index e996c62de957..fd0c2e742265 100644
> > --- a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> > +++ b/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> > @@ -9,7 +9,7 @@ LICENSE = "Proprietary"
> > DEPENDS = "libnl zlib"
> >
> > FCC_TOOLS_FOLDER ?= "qca9377_qca6174_arm32"
> > -FCC_TOOLS_FOLDER_aarch64 = "qca9377_qca6174_arm64"
> > +FCC_TOOLS_FOLDER:aarch64 = "qca9377_qca6174_arm64"
> >
> > do_install() {
> > install -d ${D}${sbindir}/fcc_tools
> > @@ -17,4 +17,4 @@ do_install() {
> > }
> >
> > COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> > -COMPATIBLE_HOST_libc-musl = 'null'
> > +COMPATIBLE_HOST:libc-musl = 'null'
> > diff --git a/recipes-bsp/formfactor/formfactor_%.bbappend b/recipes-
> > bsp/formfactor/formfactor_%.bbappend
> > index 15f8f4e8c2d4..83cce1310fbb 100644
> > --- a/recipes-bsp/formfactor/formfactor_%.bbappend
> > +++ b/recipes-bsp/formfactor/formfactor_%.bbappend
> > @@ -1,2 +1,2 @@
> > # Append path for i.MX custom matchconfig
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > diff --git a/recipes-bsp/imx-atf/imx-atf_2.4.bb b/recipes-bsp/imx-
> > atf/imx-atf_2.4.bb
> > index f4db002be302..536a0a737cab 100644
> > --- a/recipes-bsp/imx-atf/imx-atf_2.4.bb
> > +++ b/recipes-bsp/imx-atf/imx-atf_2.4.bb
> > @@ -27,7 +27,7 @@ EXTRA_OEMAKE += " \
> >
> > BUILD_OPTEE = "${@bb.utils.contains('MACHINE_FEATURES', 'optee',
> > 'true', 'false', d)}"
> >
> > -CFLAGS_remove_mx8mq = "-O2"
> > +CFLAGS:remove:mx8mq = "-O2"
> >
> > do_compile() {
> > # Clear LDFLAGS to avoid the option -Wl recognize issue
> > diff --git a/recipes-bsp/imx-lib/imx-lib_git.bb b/recipes-bsp/imx-
> > lib/imx-lib_git.bb
> > index c56190702be9..a296b185da94 100644
> > --- a/recipes-bsp/imx-lib/imx-lib_git.bb
> > +++ b/recipes-bsp/imx-lib/imx-lib_git.bb
> > @@ -20,15 +20,15 @@ S = "${WORKDIR}/git"
> >
> > inherit use-imx-headers
> >
> > -PLATFORM_mx6q = "IMX6Q"
> > -PLATFORM_mx6dl = "IMX6Q"
> > -PLATFORM_mx6sl = "IMX6S"
> > -PLATFORM_mx6sll = "IMX6UL"
> > -PLATFORM_mx6sx = "IMX6S"
> > -PLATFORM_mx6ul = "IMX6UL"
> > -PLATFORM_mx6ull = "IMX6UL"
> > -PLATFORM_mx7d = "IMX7"
> > -PLATFORM_mx7ulp = "IMX7"
> > +PLATFORM:mx6q = "IMX6Q"
> > +PLATFORM:mx6dl = "IMX6Q"
> > +PLATFORM:mx6sl = "IMX6S"
> > +PLATFORM:mx6sll = "IMX6UL"
> > +PLATFORM:mx6sx = "IMX6S"
> > +PLATFORM:mx6ul = "IMX6UL"
> > +PLATFORM:mx6ull = "IMX6UL"
> > +PLATFORM:mx7d = "IMX7"
> > +PLATFORM:mx7ulp = "IMX7"
> >
> > PARALLEL_MAKE="-j 1"
> > EXTRA_OEMAKE = ""
> > diff --git a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb b/recipes-
> > bsp/imx-mkimage/imx-boot_1.0.bb
> > index 422670bed322..484db354a75b 100644
> > --- a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> > +++ b/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> > @@ -10,8 +10,8 @@ SECTION = "BSP"
> > inherit use-imx-security-controller-firmware
> >
> > IMX_EXTRA_FIRMWARE = "firmware-imx-8 imx-sc-firmware imx-seco"
> > -IMX_EXTRA_FIRMWARE_mx8m = "firmware-imx-8m"
> > -IMX_EXTRA_FIRMWARE_mx8x = "imx-sc-firmware imx-seco"
> > +IMX_EXTRA_FIRMWARE:mx8m = "firmware-imx-8m"
> > +IMX_EXTRA_FIRMWARE:mx8x = "imx-sc-firmware imx-seco"
> > DEPENDS += " \
> > u-boot \
> > ${IMX_EXTRA_FIRMWARE} \
> > @@ -20,7 +20,7 @@ DEPENDS += " \
> > "
> > # xxd is a dependency of fspi_packer.sh
> > DEPENDS += "xxd-native"
> > -DEPENDS_append_mx8m = " u-boot-mkimage-native dtc-native"
> > +DEPENDS:append:mx8m = " u-boot-mkimage-native dtc-native"
> > BOOT_NAME = "imx-boot"
> > PROVIDES = "${BOOT_NAME}"
> >
> > @@ -41,7 +41,7 @@ do_compile[depends] += " \
> > SC_FIRMWARE_NAME ?= "scfw_tcm.bin"
> >
> > ATF_MACHINE_NAME ?= "bl31-${ATF_PLATFORM}.bin"
> > -ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES',
> > 'optee', '-optee', '', d)}"
> > +ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES',
> > 'optee', '-optee', '', d)}"
> >
> > UBOOT_NAME = "u-boot-${MACHINE}.bin-${UBOOT_CONFIG}"
> > BOOT_CONFIG_MACHINE = "${BOOT_NAME}-${MACHINE}-${UBOOT_CONFIG}.bin"
> > @@ -58,20 +58,20 @@ IMXBOOT_TARGETS ?= \
> > 'flash_multi_cores
> > flash_dcd', d), d)}"
> >
> > BOOT_STAGING = "${S}/${IMX_BOOT_SOC_TARGET}"
> > -BOOT_STAGING_mx8m = "${S}/iMX8M"
> > -BOOT_STAGING_mx8dx = "${S}/iMX8QX"
> > +BOOT_STAGING:mx8m = "${S}/iMX8M"
> > +BOOT_STAGING:mx8dx = "${S}/iMX8QX"
> >
> > SOC_FAMILY = "INVALID"
> > -SOC_FAMILY_mx8 = "mx8"
> > -SOC_FAMILY_mx8m = "mx8m"
> > -SOC_FAMILY_mx8x = "mx8x"
> > +SOC_FAMILY:mx8 = "mx8"
> > +SOC_FAMILY:mx8m = "mx8m"
> > +SOC_FAMILY:mx8x = "mx8x"
> >
> > REV_OPTION ?= ""
> > -REV_OPTION_mx8qxp = \
> > +REV_OPTION:mx8qxp = \
> > "${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', '', \
> > 'REV=C0',
> > d)}"
> >
> > -compile_mx8m() {
> > +compile:mx8m() {
> > bbnote 8MQ/8MM/8MN/8MP boot binary build
> > for ddr_firmware in ${DDR_FIRMWARE_NAME}; do
> > bbnote "Copy ddr_firmware: ${ddr_firmware} from
> > ${DEPLOY_DIR_IMAGE} -> ${BOOT_STAGING} "
> > @@ -88,7 +88,7 @@ compile_mx8m() {
> > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME}
> > ${BOOT_STAGING}/bl31.bin
> > cp ${DEPLOY_DIR_IMAGE}/${UBOOT_NAME}
> > ${BOOT_STAGING}/u-boot.bin
> > }
> > -compile_mx8() {
> > +compile:mx8() {
> > bbnote 8QM boot binary build
> > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME}
> > ${BOOT_STAGING}/scfw_tcm.bin
> > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME}
> > ${BOOT_STAGING}/bl31.bin
> > @@ -100,7 +100,7 @@ compile_mx8() {
> > fi
> > }
> >
> > -compile_mx8x() {
> > +compile:mx8x() {
> > bbnote 8QX boot binary build
> > cp ${DEPLOY_DIR_IMAGE}/${SECO_FIRMWARE_NAME}
> > ${BOOT_STAGING}
> > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME}
> > ${BOOT_STAGING}/scfw_tcm.bin
> > @@ -140,7 +140,7 @@ do_install () {
> > done
> > }
> >
> > -deploy_mx8m() {
> > +deploy:mx8m() {
> > install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> > install -m 0644 ${DEPLOY_DIR_IMAGE}/u-boot-spl.bin-${MACHINE}-
> > ${UBOOT_CONFIG} \
> >
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > @@ -153,7 +153,7 @@ deploy_mx8m() {
> > install -m 0755 ${BOOT_STAGING}/mkimage_fit_atf.sh
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > install -m 0755 ${BOOT_STAGING}/mkimage_uboot
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > }
> > -deploy_mx8() {
> > +deploy:mx8() {
> > install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> > install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME}
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > install -m 0755 ${S}/${TOOLS_NAME}
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > @@ -162,7 +162,7 @@ deploy_mx8() {
> >
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > fi
> > }
> > -deploy_mx8x() {
> > +deploy:mx8x() {
> > install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> > install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME}
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > install -m 0755 ${S}/${TOOLS_NAME}
> > ${DEPLOYDIR}/${BOOT_TOOLS}
> > diff --git a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb b/recipes-
> > bsp/imx-mkimage/imx-mkimage_git.bb
> > index f9943342962e..90e3ebf13ce7 100644
> > --- a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> > +++ b/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> > @@ -16,12 +16,12 @@ do_compile () {
> > cd ${S}
> > oe_runmake clean
> > oe_runmake bin
> > - oe_runmake -C iMX8M -f soc.mak mkimage_imx8
> > + oe_runmake -C iMX8M -f soc.mak mkimage:imx8
> > }
> >
> > do_install () {
> > cd ${S}
> > install -d ${D}${bindir}
> > - install -m 0755 iMX8M/mkimage_imx8 ${D}${bindir}/mkimage_imx8m
> > - install -m 0755 mkimage_imx8 ${D}${bindir}/mkimage_imx8
> > + install -m 0755 iMX8M/mkimage:imx8 ${D}${bindir}/mkimage_imx8m
> > + install -m 0755 mkimage:imx8 ${D}${bindir}/mkimage_imx8
> > }
> > diff --git a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > index b8c3d3c3cf4f..6eb65b811aa2 100644
> > --- a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > +++ b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > @@ -15,10 +15,10 @@ SRC_URI[sha256sum] =
> > "df0fe17c93e4c2835542d6b1b2557524f034e378b643100cd838225e82
> >
> > BOARD_TYPE ?= "mek"
> > SC_FIRMWARE_NAME ?= "INVALID"
> > -SC_FIRMWARE_NAME_mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
> > -SC_FIRMWARE_NAME_mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
> > -SC_FIRMWARE_NAME_mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
> > -SC_FIRMWARE_NAME_mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
> > +SC_FIRMWARE_NAME:mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
> > +SC_FIRMWARE_NAME:mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
> > +SC_FIRMWARE_NAME:mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
> > +SC_FIRMWARE_NAME:mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
> >
> > symlink_name = "scfw_tcm.bin"
> >
> > diff --git a/recipes-bsp/imx-test/imx-test_git.bb b/recipes-bsp/imx-
> > test/imx-test_git.bb
> > index 118590d5a93b..ad072c5f4d71 100644
> > --- a/recipes-bsp/imx-test/imx-test_git.bb
> > +++ b/recipes-bsp/imx-test/imx-test_git.bb
> > @@ -9,9 +9,9 @@ LICENSE = "GPLv2+"
> > LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-
> > licenses/GPL-2.0-or-later;md5=fed54355545ffd980b814dab4a3b312c"
> >
> > DEPENDS = "alsa-lib libdrm"
> > -DEPENDS_append_mx6 = " imx-lib"
> > -DEPENDS_append_mx7 = " imx-lib"
> > -DEPENDS_append_imxvpu = " virtual/imxvpu"
> > +DEPENDS:append:mx6 = " imx-lib"
> > +DEPENDS:append:mx7 = " imx-lib"
> > +DEPENDS:append:imxvpu = " virtual/imxvpu"
> >
> > PE = "1"
> > PV = "7.0+${SRCPV}"
> > @@ -29,22 +29,22 @@ inherit module-base use-imx-headers
> > INHIBIT_PACKAGE_STRIP = "1"
> > INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
> >
> > -PLATFORM_mx6q = "IMX6Q"
> > -PLATFORM_mx6dl = "IMX6Q"
> > -PLATFORM_mx6sl = "IMX6SL"
> > -PLATFORM_mx6sll = "IMX6SL"
> > -PLATFORM_mx6sx = "IMX6SX"
> > -PLATFORM_mx6ul = "IMX6UL"
> > -PLATFORM_mx7d = "IMX7D"
> > -PLATFORM_mx7ulp = "IMX7D"
> > -PLATFORM_mx8 = "IMX8"
> > +PLATFORM:mx6q = "IMX6Q"
> > +PLATFORM:mx6dl = "IMX6Q"
> > +PLATFORM:mx6sl = "IMX6SL"
> > +PLATFORM:mx6sll = "IMX6SL"
> > +PLATFORM:mx6sx = "IMX6SX"
> > +PLATFORM:mx6ul = "IMX6UL"
> > +PLATFORM:mx7d = "IMX7D"
> > +PLATFORM:mx7ulp = "IMX7D"
> > +PLATFORM:mx8 = "IMX8"
> >
> > PARALLEL_MAKE = "-j 1"
> > EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}"
> >
> > PACKAGECONFIG = "${@bb.utils.contains('DISTRO_FEATURES', 'x11',
> > 'x11', '', d)}"
> > -PACKAGECONFIG_append_imxvpu = " vpu"
> > -PACKAGECONFIG_append_mx8m = " swpdm"
> > +PACKAGECONFIG:append:imxvpu = " vpu"
> > +PACKAGECONFIG:append:mx8m = " swpdm"
> >
> > PACKAGECONFIG[x11] = ",,libx11 libxdamage libxrender libxrandr"
> > PACKAGECONFIG[vpu] = "HAS_VPU=true,HAS_VPU=false,virtual/imxvpu"
> > diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-
> > daemon_1.0.0.bb b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-
> > daemon_1.0.0.bb
> > index 88b9ee0ef218..d362fce3b83e 100644
> > --- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> > +++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> > @@ -4,7 +4,7 @@ LICENSE = "MIT"
> > LIC_FILES_CHKSUM = "
> > file://LICENSE.txt;md5=cd8bc2a79509c22fc9c1782a151210b1"
> >
> > DEPENDS = "imx-vpu-hantro"
> > -DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
> > +DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
> >
> > SRC_URI = " \
> > ${FSL_MIRROR}/${BP}.tar.gz \
> > @@ -13,9 +13,9 @@ SRC_URI = " \
> > SRC_URI[md5sum] = "65417710ef22214523c37f50f34b6ab2"
> > SRC_URI[sha256sum] =
> > "897d174c4c0818f31012d8a60ed51fc83fdfc55fca2d2b0fc24a0db3e9f3b6e8"
> >
> > -PLATFORM_mx8mm = "IMX8MM"
> > -PLATFORM_mx8mq = "IMX8MQ"
> > -PLATFORM_mx8mp = "IMX8MP"
> > +PLATFORM:mx8mm = "IMX8MM"
> > +PLATFORM:mx8mq = "IMX8MQ"
> > +PLATFORM:mx8mp = "IMX8MP"
> >
> > EXTRA_OEMAKE = " \
> > CROSS_COMPILE="${HOST_PREFIX}" \
> > diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > index 20ac87c747db..d2fc8a1123ac 100644
> > --- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > +++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > @@ -14,9 +14,9 @@ inherit fsl-eula-unpack use-imx-headers
> >
> > PARALLEL_MAKE="-j 1"
> >
> > -PLATFORM_mx8mm = "IMX8MM"
> > -PLATFORM_mx8mq = "IMX8MQ"
> > -PLATFORM_mx8mp = "IMX8MP"
> > +PLATFORM:mx8mm = "IMX8MM"
> > +PLATFORM:mx8mq = "IMX8MQ"
> > +PLATFORM:mx8mp = "IMX8MP"
> >
> > EXTRA_OEMAKE = " \
> > CROSS_COMPILE="${HOST_PREFIX}" \
> > diff --git a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb b/recipes-
> > bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> > index ad44065ae576..36c3fee3a7a7 100644
> > --- a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> > +++ b/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> > @@ -42,7 +42,7 @@ EXTRA_OECMAKE += " \
> > -Wno-dev \
> > "
> >
> > -do_configure_prepend() {
> > +do_configure:prepend() {
> > export SDKTARGETSYSROOT=${STAGING_DIR_HOST}
> > }
> >
> > diff --git a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > index 726b1e16d84e..e57a4273bd36 100644
> > --- a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > +++ b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > @@ -26,15 +26,15 @@ EXTRA_OECONF = "--imx-linux-headers-
> > path=${STAGING_INCDIR_IMX} \
> > # libg2d. However, that implementation's g2d_alloc() function
> > # is broken, so we cannot use it.
> > LIBG2D_PACKAGECONFIG = "g2d"
> > -LIBG2D_PACKAGECONFIG_imxdpu = ""
> > +LIBG2D_PACKAGECONFIG:imxdpu = ""
> >
> > PACKAGECONFIG ?= " "
> > -PACKAGECONFIG_append_imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
> > -PACKAGECONFIG_append_imxipu = " ipu"
> > -PACKAGECONFIG_append_imxpxp = " pxp"
> > -PACKAGECONFIG_append_mx8m = " ion dwl"
> > -PACKAGECONFIG_append_mx8qm = " ion"
> > -PACKAGECONFIG_append_mx8qxp = " ion"
> > +PACKAGECONFIG:append:imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
> > +PACKAGECONFIG:append:imxipu = " ipu"
> > +PACKAGECONFIG:append:imxpxp = " pxp"
> > +PACKAGECONFIG:append:mx8m = " ion dwl"
> > +PACKAGECONFIG:append:mx8qm = " ion"
> > +PACKAGECONFIG:append:mx8qxp = " ion"
> >
> > HANTRO_CONF = "--hantro-headers-path=${STAGING_INCDIR}/hantro_dec --
> > hantro-decoder-version=G2"
> >
> > diff --git a/recipes-bsp/mc-utils/mc-utils_git.bb b/recipes-bsp/mc-
> > utils/mc-utils_git.bb
> > index b3c79b99138e..a2f81fe0dc0a 100644
> > --- a/recipes-bsp/mc-utils/mc-utils_git.bb
> > +++ b/recipes-bsp/mc-utils/mc-utils_git.bb
> > @@ -15,13 +15,13 @@ SRCREV =
> > "8e0b863693fc2ccbc62a62c79b4e3db6da88c16e"
> > S = "${WORKDIR}/git"
> >
> > MC_CFG ?= ""
> > -MC_CFG_ls1088a = "ls1088a"
> > -MC_CFG_ls2088a = "ls2088a"
> > -MC_CFG_lx2160a = "lx2160a"
> > -MC_CFG_lx2162aqds = "lx2162aqds"
> > +MC_CFG:ls1088a = "ls1088a"
> > +MC_CFG:ls2088a = "ls2088a"
> > +MC_CFG:lx2160a = "lx2160a"
> > +MC_CFG:lx2162aqds = "lx2162aqds"
> >
> > MC_FLAVOUR ?= "RDB"
> > -MC_FLAVOUR_lx2162a = ""
> > +MC_FLAVOUR:lx2162a = ""
> >
> > do_compile () {
> > oe_runmake -C config
> > diff --git a/recipes-bsp/rcw/rcw_git.bb b/recipes-bsp/rcw/rcw_git.bb
> > index 693506157188..637035b2064c 100644
> > --- a/recipes-bsp/rcw/rcw_git.bb
> > +++ b/recipes-bsp/rcw/rcw_git.bb
> > @@ -17,9 +17,9 @@ export PYTHON = "${USRBINPATH}/python3"
> > M="${@d.getVar('MACHINE').replace('-64b','').replace('-
> > 32b','').replace('-${SITEINFO_ENDIANNESS}','')}"
> >
> > BOARD_TARGETS="${M}"
> > -BOARD_TARGETS_ls2088ardb="${M} ${M}_rev1.1"
> > -BOARD_TARGETS_ls1088ardb-pb="ls1088ardb"
> > -BOARD_TARGETS_lx2160ardb = "${M} ${M}_rev2"
> > +BOARD_TARGETS:ls2088ardb="${M} ${M}_rev1.1"
> > +BOARD_TARGETS:ls1088ardb-pb="ls1088ardb"
> > +BOARD_TARGETS:lx2160ardb = "${M} ${M}_rev2"
> >
> > do_compile () {
> > oe_runmake BOARDS="${BOARD_TARGETS}" DESTDIR=${D}/boot/rcw/
> > diff --git a/recipes-bsp/u-boot/libubootenv_%.bbappend b/recipes-
> > bsp/u-boot/libubootenv_%.bbappend
> > index 2633c344739b..619b510e1e1c 100644
> > --- a/recipes-bsp/u-boot/libubootenv_%.bbappend
> > +++ b/recipes-bsp/u-boot/libubootenv_%.bbappend
> > @@ -29,8 +29,8 @@ def fixup_uboot_config_dependency(d):
> > # | Signed-off-by: Ming Liu <liu.ming50@gmail.com>
> > # | Signed-off-by: Richard Purdie <
> > richard.purdie@linuxfoundation.org>
> > # `----
> > - ubootmachine = d.getVar("UBOOT_MACHINE_pn-%s" %
> > imx_default_bootloader)
> > - ubootconfig = (d.getVar("UBOOT_CONFIG_pn-%s" %
> > imx_default_bootloader) or "").split()
> > + ubootmachine = d.getVar("UBOOT_MACHINE:pn-%s" %
> > imx_default_bootloader)
> > + ubootconfig = (d.getVar("UBOOT_CONFIG:pn-%s" %
> > imx_default_bootloader) or "").split()
> >
> > d.setVar("UBOOT_CONFIG", ubootconfig)
> > d.setVar("UBOOT_MACHINE", ubootmachine)
> > diff --git a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > index 7f02746b060f..2e79166b279a 100644
> > --- a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > +++ b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > @@ -2,7 +2,7 @@
> > # Copyright (C) 2014-2016 Freescale Semiconductor
> > # Copyright 2017-2019 NXP
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-fslc:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-fslc:"
> >
> > require u-boot-fslc_${PV}.bb
> > require u-boot-mfgtool.inc
> > diff --git a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb b/recipes-
> > bsp/u-boot/u-boot-fslc_2021.07.bb
> > index 4f97c722dd6f..2e7bde3838f9 100644
> > --- a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> > +++ b/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> > @@ -12,7 +12,7 @@ DEPENDS += "bc-native dtc-native python3-
> > setuptools-native"
> >
> > # Location known to imx-boot component, where U-Boot artifacts
> > # should be additionally deployed.
> > -# See below note above do_deploy_append_mx8m for the purpose of
> > +# See below note above do_deploy:append:mx8m for the purpose of
> > # this delopyment location
> > BOOT_TOOLS = "imx-boot-tools"
> >
> > @@ -48,7 +48,7 @@ EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC}
> > ${BUILD_CPPFLAGS}" \
> > # starts to use it - below append would not be necessary.
> > # Once all mx8m derivatives are migrated to use the 'flash.bin' boot
> > # container - this append can be dropped completely.
> > -do_deploy_append_mx8m() {
> > +do_deploy:append:mx8m() {
> > # Deploy the mkimage, u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for
> > mkimage to generate boot binary
> > if [ -n "${UBOOT_CONFIG}" ]; then
> > for config in ${UBOOT_MACHINE}; do
> > diff --git a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > index 2b296c192909..af5028896a34 100644
> > --- a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > +++ b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > @@ -2,7 +2,7 @@
> > # Copyright (C) 2014-2016 Freescale Semiconductor
> > # Copyright 2017-2019 NXP
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-imx:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-imx:"
> >
> > require u-boot-imx_${PV}.bb
> > require u-boot-mfgtool.inc
> > diff --git a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb b/recipes-
> > bsp/u-boot/u-boot-imx_2021.04.bb
> > index 6a279a12533d..bb5809e2a179 100644
> > --- a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> > +++ b/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> > @@ -7,7 +7,7 @@ require u-boot-imx-common_${PV}.inc
> >
> > PROVIDES += "u-boot"
> >
> > -do_deploy_append_mx8m() {
> > +do_deploy:append:mx8m() {
> > # Deploy u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for mkimage to
> > generate boot binary
> > if [ -n "${UBOOT_CONFIG}" ]
> > then
> > diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb b/recipes-
> > bsp/u-boot/u-boot-qoriq_2020.04.bb
> > index 57f2780314c8..b6eee1d931a2 100644
> > --- a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> > +++ b/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> > @@ -19,14 +19,14 @@ SRCREV=
> > "f46a944f715f284aff1d42c009680ffe0be4058f"
> >
> > S = "${WORKDIR}/git"
> > B = "${WORKDIR}/build"
> > -PV_append = "+fslgit"
> > +PV:append = "+fslgit"
> > LOCALVERSION = "+fsl"
> >
> > INHIBIT_DEFAULT_DEPS = "1"
> > DEPENDS = "libgcc virtual/${TARGET_PREFIX}gcc bison-native bc-native
> > swig-native python3-native"
> > -DEPENDS_append_qoriq-arm64 = " dtc-native"
> > -DEPENDS_append_qoriq-arm = " dtc-native"
> > -DEPENDS_append_qoriq-ppc = " boot-format-native"
> > +DEPENDS:append:qoriq-arm64 = " dtc-native"
> > +DEPENDS:append:qoriq-arm = " dtc-native"
> > +DEPENDS:append:qoriq-ppc = " boot-format-native"
> >
> > python () {
> > if d.getVar("TCMODE") == "external-fsl":
> > @@ -41,8 +41,8 @@ python () {
> > sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib32-linux'
> > sys_original = d.getVar('TARGET_VENDOR') + '-' +
> > d.getVar('TARGET_OS')
> > workdir = d.getVar('WORKDIR')
> > - d.setVar('DEPENDS_append', ' lib32-gcc-cross-powerpc lib32-
> > libgcc')
> > - d.setVar('PATH_append', ':' +
> > d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
> > + d.setVar('DEPENDS:append', ' lib32-gcc-cross-powerpc lib32-
> > libgcc')
> > + d.setVar('PATH:append', ':' +
> > d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
> > d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir +
> > '/lib32-recipe-sysroot')
> > d.setVar("WRAP_TARGET_PREFIX", 'powerpc' + sys_multilib + '-
> > ')
> > elif "fsl-lsch2-32b:" in arch:
> > @@ -51,8 +51,8 @@ python () {
> > sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib64-linux'
> > sys_original = d.getVar('TARGET_VENDOR') + '-' +
> > d.getVar('TARGET_OS')
> > workdir = d.getVar('WORKDIR')
> > - d.setVar('DEPENDS_append', ' lib64-gcc-cross-aarch64 lib64-
> > libgcc')
> > - d.setVar('PATH_append', ':' +
> > d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
> > + d.setVar('DEPENDS:append', ' lib64-gcc-cross-aarch64 lib64-
> > libgcc')
> > + d.setVar('PATH:append', ':' +
> > d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
> > d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir +
> > '/lib64-recipe-sysroot')
> > d.setVar("WRAP_TARGET_PREFIX", 'aarch64' + sys_multilib + '-
> > ')
> > }
> > @@ -66,7 +66,7 @@ EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX}
> > CC="${WRAP_TARGET_PREFIX}gcc
> > EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS}
> > ${BUILD_LDFLAGS}"'
> > EXTRA_OEMAKE += 'STAGING_INCDIR=${STAGING_INCDIR_NATIVE}
> > STAGING_LIBDIR=${STAGING_LIBDIR_NATIVE}'
> >
> > -do_compile_append_qoriq() {
> > +do_compile:append:qoriq() {
> > unset i j k
> > for config in ${UBOOT_MACHINE}; do
> > i=`expr $i + 1`;
> > diff --git a/recipes-connectivity/iproute2/iproute2_%.bbappend
> > b/recipes-connectivity/iproute2/iproute2_%.bbappend
> > index 4426eca57f1a..0f9b5a87defd 100644
> > --- a/recipes-connectivity/iproute2/iproute2_%.bbappend
> > +++ b/recipes-connectivity/iproute2/iproute2_%.bbappend
> > @@ -1,4 +1,4 @@
> > -do_install_append () {
> > +do_install:append () {
> > install -d ${D}/usr/include/tc
> > cp -a ${B}/include ${D}/usr/include
> > cp -a ${B}/tc/*.h ${D}/usr/include/tc
> > diff --git a/recipes-connectivity/openssl/openssl_%.bbappend
> > b/recipes-connectivity/openssl/openssl_%.bbappend
> > index ce4ff276e633..e88de3618243 100644
> > --- a/recipes-connectivity/openssl/openssl_%.bbappend
> > +++ b/recipes-connectivity/openssl/openssl_%.bbappend
> > @@ -1,8 +1,8 @@
> > -FILESEXTRAPATHS_append := "${THISDIR}/${PN}-qoriq:"
> > +FILESEXTRAPATHS:append := "${THISDIR}/${PN}-qoriq:"
> >
> > -SRC_URI_append_qoriq = " \
> > +SRC_URI:append:qoriq = " \
> >
> > file://0001-eng_devcrypto-add-support-for-TLS-algorithms-offload.patch
> > \
> >
> > file://0002-eng_devcrypto-add-support-for-TLS1.2-algorithms-offl.patch
> > \
> > "
> >
> > -PACKAGECONFIG_append_qoriq = " cryptodev-linux"
> > +PACKAGECONFIG:append:qoriq = " cryptodev-linux"
> > diff --git a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > index 000578744ac2..46dfc1245600 100644
> > --- a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > +++ b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > @@ -1,2 +1,2 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> >
> > diff --git a/recipes-core/udev/udev-rules-qoriq.bb b/recipes-
> > core/udev/udev-rules-qoriq.bb
> > index c328f4ccbd97..e39da44ce7f3 100644
> > --- a/recipes-core/udev/udev-rules-qoriq.bb
> > +++ b/recipes-core/udev/udev-rules-qoriq.bb
> > @@ -18,11 +18,11 @@ RULE_t1024 = "72-fsl-dpaa-persistent-
> > networking.rules"
> > RULE_qoriq-arm64 = "73-fsl-dpaa-persistent-networking.rules \
> > 73-fsl-enetc-networking.rules \
> > "
> > -RULE_ls1046a = "73-fsl-dpaa-persistent-networking.rules \
> > +RULE:ls1046a = "73-fsl-dpaa-persistent-networking.rules \
> > 74-ls1046a-xfi2-networking.rules \
> > "
> > -RULE_ls1012a = ""
> > -RULE_ls2080a = ""
> > +RULE:ls1012a = ""
> > +RULE:ls2080a = ""
> >
> > do_install () {
> > install -d ${D}${sysconfdir}/udev/rules.d/
> > diff --git a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb b/recipes-
> > devtools/qemu/qemu-qoriq_4.1.0.bb
> > index dfd7fdcfcd20..fe43a5e1883e 100644
> > --- a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> > +++ b/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> > @@ -32,11 +32,11 @@ python() {
> >
> > RDEPENDS_${PN}_class-target += "bash"
> >
> > -EXTRA_OECONF_append_class-target = "
> > --target-list=${@get_qemu_target_list(d)}"
> > -EXTRA_OECONF_append_class-target_mipsarcho32 = "
> > ${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-
> > capstone', '', d)}"
> > -EXTRA_OECONF_append_class-nativesdk = "
> > --target-list=${@get_qemu_target_list(d)}"
> > +EXTRA_OECONF:append:class-target = "
> > --target-list=${@get_qemu_target_list(d)}"
> > +EXTRA_OECONF:append:class-target_mipsarcho32 = "
> > ${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-
> > capstone', '', d)}"
> > +EXTRA_OECONF:append:class-nativesdk = "
> > --target-list=${@get_qemu_target_list(d)}"
> >
> > -do_install_append_class-nativesdk() {
> > +do_install:append:class-nativesdk() {
> > ${@bb.utils.contains('PACKAGECONFIG', 'gtk+',
> > 'make_qemu_wrapper', '', d)}
> > }
> >
> > diff --git a/recipes-devtools/qemu/qemu.inc b/recipes-
> > devtools/qemu/qemu.inc
> > index bf05da9a4c3a..77d067da7ab2 100644
> > --- a/recipes-devtools/qemu/qemu.inc
> > +++ b/recipes-devtools/qemu/qemu.inc
> > @@ -52,7 +52,7 @@ COMPATIBLE_HOST_mipsarchn64 = "null"
> > # upstream states qemu doesn't work without optimization
> > DEBUG_BUILD = "0"
> >
> > -do_install_append() {
> > +do_install:append() {
> > # Prevent QA warnings about installed ${localstatedir}/run
> > if [ -d ${D}${localstatedir}/run ]; then rmdir
> > ${D}${localstatedir}/run; fi
> > }
> > @@ -101,9 +101,9 @@ export LIBTOOL="${HOST_SYS}-libtool"
> >
> > B = "${WORKDIR}/build"
> >
> > -EXTRA_OECONF_append = " --python=${HOSTTOOLS_DIR}/python3"
> > +EXTRA_OECONF:append = " --python=${HOSTTOOLS_DIR}/python3"
> >
> > -do_configure_prepend_class-native() {
> > +do_configure:prepend:class-native() {
> > # Append build host pkg-config paths for native target since
> > the host may provide sdl
> > BHOST_PKGCONFIG_PATH=$(PATH=/usr/bin:/bin pkg-config --
> > variable pc_path pkg-config || echo "")
> > if [ ! -z "$BHOST_PKGCONFIG_PATH" ]; then
> > @@ -127,7 +127,7 @@ do_install () {
> > # This will trigger a MMU access fault in the virtual CPU. With this
> > change,
> > # the qemu-mips works fine.
> > # IMPORTANT: This piece needs to be removed once the root cause is
> > fixed!
> > -do_install_append() {
> > +do_install:append() {
> > if [ -e "${D}/${bindir}/qemu-mips" ]; then
> > create_wrapper ${D}/${bindir}/qemu-mips \
> > QEMU_RESERVED_VA=0x0
> > @@ -147,8 +147,8 @@ make_qemu_wrapper() {
> > }
> >
> > # Disable kvm/virgl/mesa on targets that do not support it
> > -PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+"
> > -PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+"
> > +PACKAGECONFIG:remove:darwin = "kvm virglrenderer glx gtk+"
> > +PACKAGECONFIG:remove:mingw32 = "kvm virglrenderer glx gtk+"
> >
> > PACKAGECONFIG[sdl] = "--enable-sdl,--disable-sdl,libsdl2"
> > PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr --enable-cap-
> > ng,--disable-virtfs,libcap-ng attr,"
> > diff --git a/recipes-dpaa/fm-ucode/fm-ucode_git.bb b/recipes-dpaa/fm-
> > ucode/fm-ucode_git.bb
> > index 39e4f9d0febb..319a56b33568 100644
> > --- a/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> > +++ b/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> > @@ -13,13 +13,13 @@ SRCREV =
> > "c275e91392e2adab1ed22f3867b8269ca3c54014"
> > S = "${WORKDIR}/git"
> >
> > REGLEX ?= "${MACHINE}"
> > -REGLEX_t1023 = "t1024"
> > -REGLEX_t1040 = "t1040"
> > -REGLEX_t1042 = "t1040"
> > -REGLEX_b4420 = "b4860"
> > -REGLEX_t4160 = "t4240"
> > -REGLEX_ls1043a = "ls1043"
> > -REGLEX_ls1046a = "ls1046"
> > +REGLEX:t1023 = "t1024"
> > +REGLEX:t1040 = "t1040"
> > +REGLEX:t1042 = "t1040"
> > +REGLEX:b4420 = "b4860"
> > +REGLEX:t4160 = "t4240"
> > +REGLEX:ls1043a = "ls1043"
> > +REGLEX:ls1046a = "ls1046"
> >
> > do_install () {
> > UCODE=`echo ${REGLEX} | sed -e 's,-.*$,,' -e 's,[a-zA-Z]*$,,'`
> > diff --git a/recipes-dpaa2/aiopsl/aiopsl_git.bb b/recipes-
> > dpaa2/aiopsl/aiopsl_git.bb
> > index a1b0028938e5..794d013c5c2b 100644
> > --- a/recipes-dpaa2/aiopsl/aiopsl_git.bb
> > +++ b/recipes-dpaa2/aiopsl/aiopsl_git.bb
> > @@ -13,8 +13,8 @@ SRCREV = "87d83d8e99770325cc7ad9e10965c9959e7cb828"
> > do_configure[noexec] = "1"
> > do_compile[noexec] = "1"
> >
> > -DEMOS_PATH_ls2088a = "LS2088A"
> > -DEMOS_PATH_ls1088a = "LS1088A"
> > +DEMOS_PATH:ls2088a = "LS2088A"
> > +DEMOS_PATH:ls1088a = "LS1088A"
> >
> > do_install () {
> > install -d ${D}/usr/aiop/bin
> > diff --git a/recipes-dpaa2/management-complex/management-
> > complex_10.14.1.bb b/recipes-dpaa2/management-complex/management-
> > complex_10.14.1.bb
> > index ddb305c1a36c..69804e9fa68e 100644
> > --- a/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> > +++ b/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> > @@ -11,10 +11,10 @@ SRCREV =
> > "408110ee632f6291545b0b156cd74e7e3b4612cc"
> >
> > S = "${WORKDIR}/git"
> >
> > -REGLEX_ls2088a = "ls2088a"
> > -REGLEX_ls2080a = "ls2080a"
> > -REGLEX_ls1088a = "ls1088a"
> > -REGLEX_lx2160a = "lx2160a"
> > +REGLEX:ls2088a = "ls2088a"
> > +REGLEX:ls2080a = "ls2080a"
> > +REGLEX:ls1088a = "ls1088a"
> > +REGLEX:lx2160a = "lx2160a"
> >
> > do_install () {
> > install -d ${D}/boot
> > diff --git a/recipes-dpaa2/management-complex/management-
> > complex_10.20.4.bb b/recipes-dpaa2/management-complex/management-
> > complex_10.20.4.bb
> > index 3e14a26eabeb..7e0059703738 100644
> > --- a/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> > +++ b/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> > @@ -11,10 +11,10 @@ SRCREV =
> > "f73683596a7b72124d67b62e64f3dc2bb36b9321"
> >
> > S = "${WORKDIR}/git"
> >
> > -REGLEX_ls2088a = "ls2088a"
> > -REGLEX_ls2080a = "ls2080a"
> > -REGLEX_ls1088a = "ls1088a"
> > -REGLEX_lx2160a = "lx2160a"
> > +REGLEX:ls2088a = "ls2088a"
> > +REGLEX:ls2080a = "ls2080a"
> > +REGLEX:ls1088a = "ls1088a"
> > +REGLEX:lx2160a = "lx2160a"
> >
> > do_install () {
> > install -d ${D}/boot
> > diff --git a/recipes-dpaa2/management-complex/management-
> > complex_10.24.0.bb b/recipes-dpaa2/management-complex/management-
> > complex_10.24.0.bb
> > index 17049a15e7c8..12c1a4d89dff 100644
> > --- a/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> > +++ b/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> > @@ -11,11 +11,11 @@ SRCREV =
> > "324817697a4c89a9a940fb7dba1b18909913ee20"
> >
> > S = "${WORKDIR}/git"
> >
> > -REGLEX_ls2088a = "ls2088a"
> > -REGLEX_ls2080a = "ls2080a"
> > -REGLEX_ls1088a = "ls1088a"
> > -REGLEX_lx2160a = "lx216xa"
> > -REGLEX_lx2162a = "lx216xa"
> > +REGLEX:ls2088a = "ls2088a"
> > +REGLEX:ls2080a = "ls2080a"
> > +REGLEX:ls1088a = "ls1088a"
> > +REGLEX:lx2160a = "lx216xa"
> > +REGLEX:lx2162a = "lx216xa"
> >
> > do_install () {
> > install -d ${D}/boot
> > diff --git a/recipes-extended/dpdk/dpdk.inc b/recipes-
> > extended/dpdk/dpdk.inc
> > index 61c02ae75f90..2d07187d14fd 100644
> > --- a/recipes-extended/dpdk/dpdk.inc
> > +++ b/recipes-extended/dpdk/dpdk.inc
> > @@ -3,23 +3,23 @@ HOMEPAGE = "http://dpdk.org"
> >
> > RDEPENDS_${PN} += "python3-core"
> > DEPENDS = "virtual/kernel openssl"
> > -DEPENDS_append_x86-64 = " numactl"
> > +DEPENDS:append:x86-64 = " numactl"
> > do_configure[depends] += "virtual/kernel:do_shared_workdir"
> >
> > inherit module
> >
> > COMPATIBLE_HOST = '(aarch64|arm|i.86|x86_64).*-linux'
> > -COMPATIBLE_HOST_libc-musl = 'null'
> > -COMPATIBLE_HOST_armv4 = 'null'
> > -COMPATIBLE_HOST_armv5 = 'null'
> > -COMPATIBLE_HOST_armv6 = 'null'
> > +COMPATIBLE_HOST:libc-musl = 'null'
> > +COMPATIBLE_HOST:armv4 = 'null'
> > +COMPATIBLE_HOST:armv5 = 'null'
> > +COMPATIBLE_HOST:armv6 = 'null'
> >
> > COMPATIBLE_MACHINE = "(imx|qoriq)"
> >
> > -DPDK_RTE_TARGET_x86-64 = "x86_64-native-linuxapp-gcc"
> > -DPDK_RTE_TARGET_x86 = "i686-native-linuxapp-gcc"
> > -DPDK_RTE_TARGET_armv7a = "${ARCH}-armv7a-linuxapp-gcc"
> > -DPDK_RTE_TARGET_armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
> > +DPDK_RTE_TARGET:x86-64 = "x86_64-native-linuxapp-gcc"
> > +DPDK_RTE_TARGET:x86 = "i686-native-linuxapp-gcc"
> > +DPDK_RTE_TARGET:armv7a = "${ARCH}-armv7a-linuxapp-gcc"
> > +DPDK_RTE_TARGET:armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
> > DPDK_RTE_TARGET ?= "${ARCH}-dpaa-linuxapp-gcc"
> >
> > export RTE_TARGET = "${DPDK_RTE_TARGET}"
> > diff --git a/recipes-extended/dpdk/dpdk_19.11-20.12.bb b/recipes-
> > extended/dpdk/dpdk_19.11-20.12.bb
> > index 426713c2d1d7..37582124b021 100644
> > --- a/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> > +++ b/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> > @@ -13,7 +13,7 @@ SRCREV = "7071c27f6f5aefb57de1cffab3484707b1e82e2b"
> >
> > include dpdk.inc
> >
> > -do_install_append () {
> > +do_install:append () {
> > # Remove the unneeded dir
> > rm -rf ${D}/${datadir}/${RTE_TARGET}/app
> > }
> > diff --git a/recipes-extended/jailhouse/jailhouse_0.12.bb b/recipes-
> > extended/jailhouse/jailhouse_0.12.bb
> > index c49d7f5b194e..a83592d24f1f 100644
> > --- a/recipes-extended/jailhouse/jailhouse_0.12.bb
> > +++ b/recipes-extended/jailhouse/jailhouse_0.12.bb
> > @@ -39,9 +39,9 @@ CELLCONF_DIR ?= "${JH_DATADIR}/configs"
> > INMATES_DIR ?= "${JH_DATADIR}/inmates"
> >
> > JH_CONFIG ?= "${S}/ci/jailhouse-config-x86.h"
> > -JH_CONFIG_x86 ?= "${S}/ci/jailhouse-config-x86.h"
> > -JH_CONFIG_x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
> > -JH_CONFIG_arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
> > +JH_CONFIG:x86 ?= "${S}/ci/jailhouse-config-x86.h"
> > +JH_CONFIG:x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
> > +JH_CONFIG:arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
> >
> > do_configure() {
> > if [ -d ${STAGING_DIR_HOST}/${CELLCONF_DIR} ];
> > diff --git a/recipes-extended/odp/odp-counters_git.bb b/recipes-
> > extended/odp/odp-counters_git.bb
> > index 860dd5faf450..9d88ea43edee 100644
> > --- a/recipes-extended/odp/odp-counters_git.bb
> > +++ b/recipes-extended/odp/odp-counters_git.bb
> > @@ -2,7 +2,7 @@ require odp.inc
> >
> > inherit module
> >
> > -do_compile_prepend () {
> > +do_compile:prepend () {
> > export KERNEL_PATH="${STAGING_KERNEL_DIR}"
> > export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
> > cd ${S}/test/debug/perf_counters
> > diff --git a/recipes-extended/odp/odp-module_git.bb b/recipes-
> > extended/odp/odp-module_git.bb
> > index 46b896547a91..8bcdcd81573d 100644
> > --- a/recipes-extended/odp/odp-module_git.bb
> > +++ b/recipes-extended/odp/odp-module_git.bb
> > @@ -2,7 +2,7 @@ require odp.inc
> >
> > inherit module
> >
> > -do_compile_prepend () {
> > +do_compile:prepend () {
> > export KERNEL_PATH="${STAGING_KERNEL_DIR}"
> > export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
> > cd ${S}/kern
> > diff --git a/recipes-extended/odp/odp.inc b/recipes-
> > extended/odp/odp.inc
> > index 129f77ae108b..d1e10b0f94d4 100644
> > --- a/recipes-extended/odp/odp.inc
> > +++ b/recipes-extended/odp/odp.inc
> > @@ -6,7 +6,7 @@ SECTION = "console/network"
> > LICENSE = "BSD-3-Clause"
> > LIC_FILES_CHKSUM = "
> > file://LICENSE;md5=ca6103dc75397fb6bec596187d6b7829"
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/odp:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/odp:"
> >
> > SRC_URI = " \
> > git://source.codeaurora.org/external/qoriq/qoriq-
> > components/odp;nobranch=1 \
> > diff --git a/recipes-extended/odp/odp_git.bb b/recipes-
> > extended/odp/odp_git.bb
> > index 00575e24d5a8..bfe251ed6bda 100644
> > --- a/recipes-extended/odp/odp_git.bb
> > +++ b/recipes-extended/odp/odp_git.bb
> > @@ -9,14 +9,14 @@ DEPENDS = "openssl cunit libxml2"
> > RDEPENDS_${PN} = "bash libcrypto libssl odp-module odp-counters"
> >
> > ODP_SOC ?= ""
> > -ODP_SOC_ls1043ardb = "LS1043"
> > -ODP_SOC_ls1046ardb = "LS1046"
> > +ODP_SOC:ls1043ardb = "LS1043"
> > +ODP_SOC:ls1046ardb = "LS1046"
> > ODP_PLATFORM ?= "linux-dpaa2"
> > ODP_BUILD_TYPE ?= "ls2088"
> > -ODP_BUILD_TYPE_ls1043ardb = "ls1043"
> > -ODP_BUILD_TYPE_ls1046ardb = "ls1046"
> > -ODP_BUILD_TYPE_ls2080ardb = "ls2080"
> > -ODP_BUILD_TYPE_ls1088ardb = "ls1088"
> > +ODP_BUILD_TYPE:ls1043ardb = "ls1043"
> > +ODP_BUILD_TYPE:ls1046ardb = "ls1046"
> > +ODP_BUILD_TYPE:ls2080ardb = "ls2080"
> > +ODP_BUILD_TYPE:ls1088ardb = "ls1088"
> >
> > EXTRA_OECONF = "--with-platform=${ODP_PLATFORM} \
> > --enable-test-vald \
> > @@ -34,17 +34,17 @@ CFLAGS += "-Wno-format-truncation -Wno-maybe-
> > uninitialized -Wno-implicit-fallthr
> >
> > PACKAGECONFIG[perf] = "--enable-test-perf,,,"
> >
> > -do_configure_prepend () {
> > +do_configure:prepend () {
> > export SOC=${ODP_SOC}
> > ${S}/bootstrap
> > }
> >
> > -do_compile_prepend () {
> > +do_compile:prepend () {
> > export SOC=${ODP_SOC}
> > export ARCH=${TUNE_ARCH}
> > }
> >
> > -do_install_append () {
> > +do_install:append () {
> > install -d ${D}${includedir}/odp/kni
> > install -d ${D}${includedir}/odp/kern
> > install -d ${D}${includedir}/odp/flib/mc
> > diff --git a/recipes-extended/procps/procps_%.bbappend b/recipes-
> > extended/procps/procps_%.bbappend
> > index face0ccc0f61..43fb349b8de2 100644
> > --- a/recipes-extended/procps/procps_%.bbappend
> > +++ b/recipes-extended/procps/procps_%.bbappend
> > @@ -1,4 +1,4 @@
> > -do_install_append_qoriq-ppc() {
> > +do_install:append:qoriq-ppc() {
> > for keyword in \
> > net.ipv4.conf.default.rp_filter \
> > net.ipv4.conf.all.rp_filter \
> > diff --git a/recipes-extended/testfloat/testfloat_2a.bb b/recipes-
> > extended/testfloat/testfloat_2a.bb
> > index 800cef3d172e..6777249f39e3 100644
> > --- a/recipes-extended/testfloat/testfloat_2a.bb
> > +++ b/recipes-extended/testfloat/testfloat_2a.bb
> > @@ -6,7 +6,7 @@ LIC_FILES_CHKSUM = "
> > file://testfloat/testfloat.txt;beginline=87;endline=95;md5=b
> > SRC_URI = "
> > http://www.jhauser.us/arithmetic/TestFloat-2a.tar.Z;name=TestFloat \
> >
> > http://www.jhauser.us/arithmetic/SoftFloat-2b.tar.Z;name=SoftFloat \
> > "
> > -SRC_URI_append_qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
> > +SRC_URI:append:qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
> >
> > file://TestFloat-powerpc-E500v2-SPE-1.patch \
> >
> > file://Yocto-replace-COMPILE_PREFIX-gcc.patch \
> > "
> > diff --git a/recipes-extended/tsntool/tsntool_git.bb b/recipes-
> > extended/tsntool/tsntool_git.bb
> > index 8ef79d27c8bd..ea452f7c82f3 100644
> > --- a/recipes-extended/tsntool/tsntool_git.bb
> > +++ b/recipes-extended/tsntool/tsntool_git.bb
> > @@ -14,7 +14,7 @@ S = "${WORKDIR}/git"
> >
> > do_configure[depends] += "virtual/kernel:do_shared_workdir"
> >
> > -do_compile_prepend() {
> > +do_compile:prepend() {
> > mkdir -p ${S}/include/linux
> > cp -r ${STAGING_KERNEL_DIR}/include/uapi/linux/tsn.h
> > ${S}/include/linux
> > }
> > diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > index 4ad257ee9364..9229e26683a6 100644
> > --- a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > +++ b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > @@ -3,7 +3,7 @@ DESCRIPTION = "Add packages for ISP build"
> > inherit packagegroup
> >
> > ISP_PKGS ?= ""
> > -ISP_PKGS_mx8mp = " \
> > +ISP_PKGS:mx8mp = " \
> > isp-imx \
> > basler-camera \
> > basler-camera-dev \
> > diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > index aeba762386f3..acadd526bc61 100644
> > --- a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > +++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > @@ -10,4 +10,4 @@ RDEPENDS_${PN} = " \
> > "
> >
> > COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> > -COMPATIBLE_HOST_libc-musl = 'null'
> > +COMPATIBLE_HOST:libc-musl = 'null'
> > diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > index 43df5a70e670..233e3d00fa92 100644
> > --- a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > +++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > @@ -9,4 +9,4 @@ RDEPENDS_${PN} = " \
> > firmware-qca9377 \
> > "
> > COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> > -COMPATIBLE_HOST_libc-musl = 'null'
> > +COMPATIBLE_HOST:libc-musl = 'null'
> > diff --git a/recipes-graphics/cairo/cairo_%.bbappend b/recipes-
> > graphics/cairo/cairo_%.bbappend
> > index 5b1562ab8b4d..2c73c7f32f25 100644
> > --- a/recipes-graphics/cairo/cairo_%.bbappend
> > +++ b/recipes-graphics/cairo/cairo_%.bbappend
> > @@ -1,2 +1,2 @@
> > -PACKAGECONFIG_append_imxgpu3d = " egl glesv2"
> > -PACKAGECONFIG_remove_imxgpu3d = "opengl"
> > +PACKAGECONFIG:append:imxgpu3d = " egl glesv2"
> > +PACKAGECONFIG:remove:imxgpu3d = "opengl"
> > diff --git a/recipes-graphics/drm/libdrm_2.4.102.imx.bb b/recipes-
> > graphics/drm/libdrm_2.4.102.imx.bb
> > index 6935b7822b63..371d2e1775d8 100644
> > --- a/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> > +++ b/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> > @@ -64,10 +64,10 @@ FILES_${PN}-etnaviv =
> > "${libdir}/libdrm_etnaviv.so.*"
> >
> > BBCLASSEXTEND = "native nativesdk"
> >
> > -PACKAGES_prepend_imxgpu = "${PN}-vivante "
> > -RRECOMMENDS_${PN}-drivers_append_imxgpu = " ${PN}-vivante"
> > +PACKAGES:prepend:imxgpu = "${PN}-vivante "
> > +RRECOMMENDS_${PN}-drivers:append:imxgpu = " ${PN}-vivante"
> > FILES_${PN}-vivante = "${libdir}/libdrm_vivante.so.*"
> > -PACKAGECONFIG_append_imxgpu = " vivante"
> > +PACKAGECONFIG:append:imxgpu = " vivante"
> > PACKAGECONFIG[vivante] = "-Dvivante=true,-Dvivante=false"
> >
> > PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> > diff --git a/recipes-graphics/gtk+/gtk+3_%.bbappend b/recipes-
> > graphics/gtk+/gtk+3_%.bbappend
> > index be2bac75fbf8..2f108a274b0f 100644
> > --- a/recipes-graphics/gtk+/gtk+3_%.bbappend
> > +++ b/recipes-graphics/gtk+/gtk+3_%.bbappend
> > @@ -1,5 +1,5 @@
> > -DEPENDS_append_imxgpu2d = " virtual/egl"
> > +DEPENDS:append:imxgpu2d = " virtual/egl"
> >
> > -PACKAGECONFIG_remove_imxgpu2d = " \
> > +PACKAGECONFIG:remove:imxgpu2d = " \
> > ${@bb.utils.contains("DISTRO_FEATURES", "wayland", "x11", "",
> > d)} \
> > "
> > diff --git a/recipes-graphics/images/core-image-weston.bbappend
> > b/recipes-graphics/images/core-image-weston.bbappend
> > index 2a3cde69a8cd..77d2fe747801 100644
> > --- a/recipes-graphics/images/core-image-weston.bbappend
> > +++ b/recipes-graphics/images/core-image-weston.bbappend
> > @@ -1,3 +1,3 @@
> > # FIXME: i.MX6SL cannot use mesa for Graphics and it lacks GL
> > support,
> > # so for now we skip it.
> > -CORE_IMAGE_BASE_INSTALL_remove_mx6sl = "clutter-1.0-examples"
> > +CORE_IMAGE_BASE_INSTALL:remove:mx6sl = "clutter-1.0-examples"
> > diff --git a/recipes-graphics/imx-gpu-apitrace/imx-gpu-
> > apitrace_9.0.0.bb b/recipes-graphics/imx-gpu-apitrace/imx-gpu-
> > apitrace_9.0.0.bb
> > index 65ce9cd567b4..d0ac10bdb9a2 100644
> > --- a/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> > +++ b/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> > @@ -11,16 +11,16 @@ S = "${WORKDIR}/git"
> >
> > inherit cmake pkgconfig perlnative python3native
> >
> > -PACKAGECONFIG_BACKEND_mx6 = " \
> > +PACKAGECONFIG_BACKEND:mx6 = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'waffle', \
> > bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', \
> > '', d),
> > d)} \
> > "
> > -PACKAGECONFIG_BACKEND_mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
> > -PACKAGECONFIG_BACKEND_mx8 = "waffle"
> > +PACKAGECONFIG_BACKEND:mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
> > +PACKAGECONFIG_BACKEND:mx8 = "waffle"
> >
> > PACKAGECONFIG_GPU2D = ""
> > -PACKAGECONFIG_GPU2D_imxgpu2d = "vivante"
> > +PACKAGECONFIG_GPU2D:imxgpu2d = "vivante"
> >
> > PACKAGECONFIG ??= " \
> > egl \
> > diff --git a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > index 91a5542bd7a4..4c732ff2feb0 100644
> > --- a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > +++ b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > @@ -17,8 +17,8 @@ DEPENDS += " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'libxcb
> > libxshmfence libxxf86vm', \
> > '', d)} \
> > "
> > -DEPENDS_append_imxdrm = " libdrm wayland"
> > -DEPENDS_append_mx8 = " patchelf-native"
> > +DEPENDS:append:imxdrm = " libdrm wayland"
> > +DEPENDS:append:mx8 = " patchelf-native"
> >
> > # imx-gpu-viv does not provide everything it needs to for
> > virtual/libgl
> > # on x11 backend or on Wayland backend with XWayland support.
> > @@ -26,19 +26,19 @@ DEPENDS_append_mx8 = " patchelf-native"
> > DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'mesa',
> > '', d)}"
> >
> > EXTRA_PROVIDES = ""
> > -EXTRA_PROVIDES_append_imxgpu3d = " \
> > +EXTRA_PROVIDES:append:imxgpu3d = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland',
> > 'virtual/libgl', \
> > bb.utils.contains('DISTRO_FEATURES', 'x11',
> > 'virtual/libgl', \
> > '', d), d)} \
> > virtual/libgles1 \
> > virtual/libgles2 \
> > "
> > -EXTRA_PROVIDES_append_mx8 = " \
> > +EXTRA_PROVIDES:append:mx8 = " \
> > virtual/libgbm \
> > "
> > PROVIDES_OPENVX = ""
> > -PROVIDES_OPENVX_mx8 = "virtual/libopenvx"
> > -PROVIDES_OPENVX_mx8mm = ""
> > +PROVIDES_OPENVX:mx8 = "virtual/libopenvx"
> > +PROVIDES_OPENVX:mx8mm = ""
> > PROVIDES += " \
> > imx-gpu-viv \
> > libgal-imx \
> > @@ -52,13 +52,13 @@ PROVIDES += " \
> > ${EXTRA_PROVIDES} \
> > "
> >
> > -RPROVIDES_${PN}_imxgpu3d += "imx-gpu-viv"
> > +RPROVIDES_${PN}:imxgpu3d += "imx-gpu-viv"
> >
> > PE = "1"
> >
> > inherit fsl-eula-unpack features_check
> >
> > -REQUIRED_DISTRO_FEATURES_mx8 = "wayland"
> > +REQUIRED_DISTRO_FEATURES:mx8 = "wayland"
> >
> > SRC_URI = "${FSL_MIRROR}/${BPN}-${PV}.bin;fsl-eula=true"
> >
> > @@ -69,7 +69,7 @@ PACKAGECONFIG[valgrind] = ""
> >
> > # Note : If you add a package here, to prevent a naming conflict see
> > the python_anonymous() futher below
> > IMX_PACKAGES_GBM = ""
> > -IMX_PACKAGES_GBM_mx8 = "libgbm-imx libgbm-imx-dev"
> > +IMX_PACKAGES_GBM:mx8 = "libgbm-imx libgbm-imx-dev"
> > PACKAGES =+ "libclc-imx libclc-imx-dev \
> > libgl-imx libgl-imx-dev \
> > libgles1-imx libgles1-imx-dev \
> > @@ -140,21 +140,21 @@ python __anonymous() {
> > }
> >
> > IS_MX6SL = "0"
> > -IS_MX6SL_mx6sl = "1"
> > +IS_MX6SL:mx6sl = "1"
> >
> > IS_MX8 = "0"
> > -IS_MX8_mx8 = "1"
> > +IS_MX8:mx8 = "1"
> >
> > PACKAGE_FP_TYPE = "hardfp"
> >
> > HAS_GBM = "false"
> > -HAS_GBM_mx8 = "true"
> > +HAS_GBM:mx8 = "true"
> >
> > GLES3_HEADER_REMOVALS = "gl31.h gl32.h"
> > -GLES3_HEADER_REMOVALS_mx8m = "gl32.h"
> > -GLES3_HEADER_REMOVALS_mx8mm = "gl31.h gl32.h"
> > -GLES3_HEADER_REMOVALS_mx8qxp = ""
> > -GLES3_HEADER_REMOVALS_mx8qm = ""
> > +GLES3_HEADER_REMOVALS:mx8m = "gl32.h"
> > +GLES3_HEADER_REMOVALS:mx8mm = "gl31.h gl32.h"
> > +GLES3_HEADER_REMOVALS:mx8qxp = ""
> > +GLES3_HEADER_REMOVALS:mx8qm = ""
> >
> > do_install () {
> > install -d ${D}${libdir}
> > @@ -291,9 +291,9 @@ INSANE_SKIP_libgal-imx += "build-deps"
> >
> > FILES_libvsc-imx = "${libdir}/libVSC${SOLIBS}"
> >
> > -FILES_libgbm-imx_mx8 = "${libdir}/libgbm*${REALSOLIBS}
> > ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
> > -FILES_libgbm-imx-dev_mx8 = "${libdir}/pkgconfig/gbm.pc
> > ${includedir}/gbm.h"
> > -RDEPENDS_libgbm-imx_append_mx8 = " libdrm"
> > +FILES_libgbm-imx:mx8 = "${libdir}/libgbm*${REALSOLIBS}
> > ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
> > +FILES_libgbm-imx-dev:mx8 = "${libdir}/pkgconfig/gbm.pc
> > ${includedir}/gbm.h"
> > +RDEPENDS_libgbm-imx:append:mx8 = " libdrm"
> > INSANE_SKIP_libgbm-imx += "dev-so"
> >
> > FILES_libvulkan-imx = "${libdir}/libvulkan_VSI${REALSOLIBS}
> > ${libdir}/libSPIRV_viv${SOLIBS}"
> > @@ -358,10 +358,10 @@ INSANE_SKIP_libgc-wayland-protocol-imx += "dev-
> > so"
> > FILES_libgc-wayland-protocol-imx =
> > "${libdir}/libgc_wayland_protocol${REALSOLIBS}
> > ${libdir}/libgc_wayland_protocol${SOLIBS}"
> > FILES_libgc-wayland-protocol-imx-dev =
> > "${libdir}/libgc_wayland_protocol${SOLIBSDEV}
> > ${libdir}/pkgconfig/gc_wayland_protocol.pc"
> >
> > -FILES_imx-gpu-viv-tools = "${bindir}/gmem_info"
> > +FILES:imx-gpu-viv-tools = "${bindir}/gmem_info"
> >
> > -FILES_imx-gpu-viv-demos = "/opt"
> > -INSANE_SKIP_imx-gpu-viv-demos += "rpaths dev-deps"
> > +FILES:imx-gpu-viv-demos = "/opt"
> > +INSANE_SKIP:imx-gpu-viv-demos += "rpaths dev-deps"
> >
> > FILES_libnn-imx = "${libdir}/libNN*${SOLIBS}
> > ${libdir}/libnn*${SOLIBS} ${libdir}/libneuralnetworks${SOLIBS}"
> > FILES_libnn-imx-dev = "${includedir}/nnrt"
> > diff --git a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > index 5b82b3f4639b..71baa53d82ef 100644
> > --- a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > +++ b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > @@ -1,5 +1,5 @@
> > # Append EGL_CFLAGS to CFLAGS
> > -CFLAGS_append_imxgpu = " \
> > +CFLAGS:append:imxgpu = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-
> > DEGL_API_FB', d)} \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-
> > DWL_EGL_PLATFORM', '', d)} \
> > "
> > diff --git a/recipes-graphics/libsdl2/libsdl2_%.bbappend b/recipes-
> > graphics/libsdl2/libsdl2_%.bbappend
> > index 303ea63a7cf2..af9c97bb6e97 100644
> > --- a/recipes-graphics/libsdl2/libsdl2_%.bbappend
> > +++ b/recipes-graphics/libsdl2/libsdl2_%.bbappend
> > @@ -1,8 +1,8 @@
> > # what vivante driver does libsdl2 mean? Anyway it fails with
> > missing functions as
> > # VIVANTE_Create VIVANTE_GLES_GetProcAddress
> > VIVANTE_GLES_UnloadLibrary ...
> > -EXTRA_OECONF_append_imxgpu2d = " --disable-video-vivante"
> > +EXTRA_OECONF:append:imxgpu2d = " --disable-video-vivante"
> >
> > -CFLAGS_append_imxgpu = " -DLINUX \
> > +CFLAGS:append:imxgpu = " -DLINUX \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-
> > DEGL_API_FB', d)} \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-
> > DWL_EGL_PLATFORM', '', d)} \
> > "
> > diff --git a/recipes-graphics/mesa/mesa-demos_%.bbappend b/recipes-
> > graphics/mesa/mesa-demos_%.bbappend
> > index 301f1b59f125..4b518185119b 100644
> > --- a/recipes-graphics/mesa/mesa-demos_%.bbappend
> > +++ b/recipes-graphics/mesa/mesa-demos_%.bbappend
> > @@ -1,26 +1,26 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> >
> > -SRC_URI_append_imxgpu = "
> > file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
> > +SRC_URI:append:imxgpu = "
> > file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
> > file://fix-clear-build-break.patch \
> >
> > file://Add-OpenVG-demos-to-support-wayland.patch"
> >
> > PACKAGECONFIG_REMOVE_IF_2D_ONLY = ""
> > -PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu2d = "gles1 gles2"
> > -PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu3d = ""
> > +PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu2d = "gles1 gles2"
> > +PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu3d = ""
> > PACKAGECONFIG_REMOVE_IF_GPU = ""
> > -PACKAGECONFIG_REMOVE_IF_GPU_imxgpu = " \
> > +PACKAGECONFIG_REMOVE_IF_GPU:imxgpu = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'glu x11',
> > '', d)} \
> > "
> > -PACKAGECONFIG_remove = " \
> > +PACKAGECONFIG:remove = " \
> > ${PACKAGECONFIG_REMOVE_IF_2D_ONLY} \
> > ${PACKAGECONFIG_REMOVE_IF_GPU} \
> > "
> >
> > PACKAGECONFIG_APPEND_IF_GPU = ""
> > -PACKAGECONFIG_APPEND_IF_GPU_imxgpu = " \
> > +PACKAGECONFIG_APPEND_IF_GPU:imxgpu = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland vg',
> > '', d)} \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glut',
> > '', d)} \
> > "
> > -PACKAGECONFIG_append = " \
> > +PACKAGECONFIG:append = " \
> > ${PACKAGECONFIG_APPEND_IF_GPU} \
> > "
> > diff --git a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb b/recipes-
> > graphics/mesa/mesa-etnaviv-env_0.1.bb
> > index 2a32c448f436..c58c2cf30dc9 100644
> > --- a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> > +++ b/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> > @@ -12,7 +12,7 @@ SRC_URI = "\
> > do_configure[noexec] = "1"
> > do_compile[noexec] = "1"
> >
> > -do_install_use-mainline-bsp() {
> > +do_install:use-mainline-bsp() {
> > # MESA global envirronment variables
> >
> > # systemd
> > diff --git a/recipes-graphics/mesa/mesa-gl_%.bbappend b/recipes-
> > graphics/mesa/mesa-gl_%.bbappend
> > index ca1c8f46d680..dafd27f0a68e 100644
> > --- a/recipes-graphics/mesa/mesa-gl_%.bbappend
> > +++ b/recipes-graphics/mesa/mesa-gl_%.bbappend
> > @@ -1 +1 @@
> > -COMPATIBLE_MACHINE_imxgpu = "(-)"
> > +COMPATIBLE_MACHINE:imxgpu = "(-)"
> > diff --git a/recipes-graphics/mesa/mesa_%.bbappend b/recipes-
> > graphics/mesa/mesa_%.bbappend
> > index 423ee63ec638..d0b55cacea4b 100644
> > --- a/recipes-graphics/mesa/mesa_%.bbappend
> > +++ b/recipes-graphics/mesa/mesa_%.bbappend
> > @@ -1,5 +1,5 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > -SRC_URI_append_use-mainline-bsp = " \
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > +SRC_URI:append:use-mainline-bsp = " \
> > file://0001-dri-add-createImageWithModifiers2-interface.patch \
> > file://0002-dri-add-loader_dri_create_image-helper.patch \
> >
> > file://0003-loader-dri3-convert-to-loader_dri_create_image.patch \
> > @@ -11,11 +11,11 @@ SRC_URI_append_use-mainline-bsp = " \
> >
> > file://0009-etnaviv-flush-used-render-buffers-on-context-flush-w.patch
> > \
> > "
> >
> > -PROVIDES_remove_imxgpu = "virtual/egl"
> > -PROVIDES_remove_imxgpu3d = "virtual/libgl virtual/libgles1
> > virtual/libgles2"
> > +PROVIDES:remove:imxgpu = "virtual/egl"
> > +PROVIDES:remove:imxgpu3d = "virtual/libgl virtual/libgles1
> > virtual/libgles2"
> >
> > -PACKAGECONFIG_remove_imxgpu = "egl gbm"
> > -PACKAGECONFIG_remove_imxgpu3d = "gles"
> > +PACKAGECONFIG:remove:imxgpu = "egl gbm"
> > +PACKAGECONFIG:remove:imxgpu3d = "gles"
> >
> > # FIXME: mesa should support 'x11-no-tls' option
> > python () {
> > @@ -28,13 +28,13 @@ python () {
> > }
> >
> > # Enable Etnaviv and Freedreno support
> > -PACKAGECONFIG_append_use-mainline-bsp = " gallium etnaviv kmsro
> > freedreno"
> > +PACKAGECONFIG:append:use-mainline-bsp = " gallium etnaviv kmsro
> > freedreno"
> >
> > # For NXP BSP, GPU drivers don't support dri
> > -PACKAGECONFIG_remove_imxgpu_use-nxp-bsp = "dri"
> > +PACKAGECONFIG:remove:imxgpu:use-nxp-bsp = "dri"
> >
> > # mainline/etnaviv:
> > -RRECOMMENDS_${PN}-megadriver_append_use-mainline-bsp = " libdrm-
> > etnaviv mesa-etnaviv-env"
> > +RRECOMMENDS_${PN}-megadriver:append:use-mainline-bsp = " libdrm-
> > etnaviv mesa-etnaviv-env"
> >
> > BACKEND = \
> > "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', \
> > @@ -42,7 +42,7 @@ BACKEND = \
> > 'fb',
> > d), d)}"
> >
> > # FIXME: Dirty hack to allow use of Vivante GPU libGL binary
> > -do_install_append_imxgpu3d () {
> > +do_install:append:imxgpu3d () {
> > rm -f ${D}${libdir}/libGL.* \
> > ${D}${includedir}/GL/gl.h \
> > ${D}${includedir}/GL/glcorearb.h \
> > @@ -54,6 +54,6 @@ do_install_append_imxgpu3d () {
> > fi
> > }
> >
> > -do_install_append_imxgpu () {
> > +do_install:append:imxgpu () {
> > rm -rf ${D}${includedir}/KHR
> > }
> > diff --git a/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > index 28e1dc32fcce..1e4d181ce3e5 100644
> > --- a/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > +++ b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > @@ -1,3 +1,3 @@
> > # The i.MX implementation is dynamically loaded, so it requires an
> > # explicit runtime dependency.
> > -RRECOMMENDS_${PN}_append_imxgpu = " libvulkan-imx"
> > +RRECOMMENDS_${PN}:append:imxgpu = " libvulkan-imx"
> > diff --git a/recipes-graphics/waffle/waffle_%.bbappend b/recipes-
> > graphics/waffle/waffle_%.bbappend
> > index 9d090bcfe2b0..380273a8c55c 100644
> > --- a/recipes-graphics/waffle/waffle_%.bbappend
> > +++ b/recipes-graphics/waffle/waffle_%.bbappend
> > @@ -1,4 +1,4 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> >
> > SRC_URI += " \
> > file://0001-meson-Add-missing-wayland-dependency-on-EGL.patch \
> > @@ -6,11 +6,11 @@ SRC_URI += " \
> > "
> >
> > PACKAGECONFIG_IMXGPU_X11 = ""
> > -PACKAGECONFIG_IMXGPU_X11_imxgpu3d = "x11-egl glx"
> > +PACKAGECONFIG_IMXGPU_X11:imxgpu3d = "x11-egl glx"
> > PACKAGECONFIG_IMXGPU_GBM = "gbm"
> > -PACKAGECONFIG_IMXGPU_GBM_mx6 = ""
> > -PACKAGECONFIG_IMXGPU_GBM_mx7 = ""
> > -PACKAGECONFIG_imxgpu = " \
> > +PACKAGECONFIG_IMXGPU_GBM:mx6 = ""
> > +PACKAGECONFIG_IMXGPU_GBM:mx7 = ""
> > +PACKAGECONFIG:imxgpu = " \
> > ${@bb.utils.contains('DISTRO_FEATURES',
> > 'wayland', 'wayland', \
> > bb.utils.contains('DISTRO_FEATURES', 'x11',
> > '${PACKAGECONFIG_IMXGPU_X11}', \
> >
> > '', d), d)} \
> > diff --git a/recipes-graphics/wayland/weston-init.bbappend b/recipes-
> > graphics/wayland/weston-init.bbappend
> > index ebd982687b19..5710e9b5ecad 100644
> > --- a/recipes-graphics/wayland/weston-init.bbappend
> > +++ b/recipes-graphics/wayland/weston-init.bbappend
> > @@ -1,24 +1,24 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> >
> > # OpenGL is not required for parts with GPU support for 2D but not
> > 3D
> > IMX_REQUIRED_DISTRO_FEATURES_REMOVE = ""
> > -IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu2d = "opengl"
> > -IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu3d = ""
> > -REQUIRED_DISTRO_FEATURES_remove =
> > "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
> > +IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu2d = "opengl"
> > +IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu3d = ""
> > +REQUIRED_DISTRO_FEATURES:remove =
> > "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
> >
> > -SRC_URI_append_mx6sl = " file://weston.config"
> > +SRC_URI:append:mx6sl = " file://weston.config"
> >
> > # To customize weston.ini, start by setting the desired assignment
> > in weston.ini,
> > # commented out. For example:
> > # #xwayland=true
> > # Then add the assignment to INI_UNCOMMENT_ASSIGNMENTS.
> > -INI_UNCOMMENT_ASSIGNMENTS_append_imx = " \
> > +INI_UNCOMMENT_ASSIGNMENTS:append:imx = " \
> > ${@bb.utils.contains('DISTRO_FEATURES', 'x11 wayland',
> > 'xwayland=true', '', d)} \
> > "
> > -INI_UNCOMMENT_ASSIGNMENTS_append_mx8 = " \
> > +INI_UNCOMMENT_ASSIGNMENTS:append:mx8 = " \
> > repaint-window=16 \
> > "
> > -INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
> > +INI_UNCOMMENT_ASSIGNMENTS:append:mx8mq = " \
> > gbm-format=argb8888 \
> > \\[shell\\] \
> > size=1920x1080 \
> > @@ -27,10 +27,10 @@ INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
> > # FIXME: The 8QM and 8QXP SoCs have better performance without G2D
> > so don't enable it
> > # Ideally, this should be seamless and Vivante ought to handle it
> > internally and take the fastest
> > # rendering code.
> > -INI_UNCOMMENT_USE_G2D_imxgpu2d ?= "use-g2d=1"
> > -INI_UNCOMMENT_USE_G2D_mx8qm = ""
> > -INI_UNCOMMENT_USE_G2D_mx8qxp = ""
> > -INI_UNCOMMENT_ASSIGNMENTS_append_imxgpu2d = " \
> > +INI_UNCOMMENT_USE_G2D:imxgpu2d ?= "use-g2d=1"
> > +INI_UNCOMMENT_USE_G2D:mx8qm = ""
> > +INI_UNCOMMENT_USE_G2D:mx8qxp = ""
> > +INI_UNCOMMENT_ASSIGNMENTS:append:imxgpu2d = " \
> > ${INI_UNCOMMENT_USE_G2D} \
> > "
> >
> > @@ -41,7 +41,7 @@ uncomment() {
> > sed -i -e 's,^#'"$1"','"$1"',g' $2
> > }
> >
> > -do_install_append() {
> > +do_install:append() {
> > if [ -f "${WORKDIR}/weston.config" ]; then
> > install -Dm0755 ${WORKDIR}/weston.config
> > ${D}${sysconfdir}/default/weston
> > fi
> > diff --git a/recipes-graphics/wayland/weston_9.0.0.imx.bb b/recipes-
> > graphics/wayland/weston_9.0.0.imx.bb
> > index 026f27cebe8b..16607a93c4d2 100644
> > --- a/recipes-graphics/wayland/weston_9.0.0.imx.bb
> > +++ b/recipes-graphics/wayland/weston_9.0.0.imx.bb
> > @@ -20,7 +20,7 @@ SRC_URI = "
> > https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
> >
> > file://0001-tests-include-fcntl.h-for-open-O_RDWR-O_CLOEXEC-and-.patch
> > \
> > "
> >
> > -SRC_URI_append_libc-musl = " file://dont-use-plane-add-prop.patch "
> > +SRC_URI:append:libc-musl = " file://dont-use-plane-add-prop.patch "
> >
> > SRC_URI[sha256sum] =
> > "5cf5d6ce192e0eb15c1fc861a436bf21b5bb3b91dbdabbdebe83e1f83aa098fe"
> >
> > @@ -97,7 +97,7 @@ PACKAGECONFIG[shell-ivi] = "-Dshell-ivi=true,-
> > Dshell-ivi=false"
> > # JPEG image loading support
> > PACKAGECONFIG[image-jpeg] = "-Dimage-jpeg=true,-Dimage-jpeg=false,
> > jpeg"
> >
> > -do_install_append() {
> > +do_install:append() {
> > # Weston doesn't need the .la files to load modules, so wipe
> > them
> > rm -f ${D}/${libdir}/libweston-${WESTON_MAJOR_VERSION}/*.la
> >
> > @@ -160,23 +160,23 @@ S = "${WORKDIR}/git"
> >
> > # Disable OpenGL for parts with GPU support for 2D but not 3D
> > REQUIRED_DISTRO_FEATURES = "opengl"
> > -REQUIRED_DISTRO_FEATURES_imxgpu2d = ""
> > -REQUIRED_DISTRO_FEATURES_imxgpu3d = "opengl"
> > +REQUIRED_DISTRO_FEATURES:imxgpu2d = ""
> > +REQUIRED_DISTRO_FEATURES:imxgpu3d = "opengl"
> > PACKAGECONFIG_OPENGL = "opengl"
> > -PACKAGECONFIG_OPENGL_imxgpu2d = ""
> > -PACKAGECONFIG_OPENGL_imxgpu3d = "opengl"
> > +PACKAGECONFIG_OPENGL:imxgpu2d = ""
> > +PACKAGECONFIG_OPENGL:imxgpu3d = "opengl"
> >
> > -PACKAGECONFIG_remove = "wayland x11"
> > -PACKAGECONFIG_append = " ${@bb.utils.filter('DISTRO_FEATURES',
> > '${PACKAGECONFIG_OPENGL}', d)}"
> > +PACKAGECONFIG:remove = "wayland x11"
> > +PACKAGECONFIG:append = " ${@bb.utils.filter('DISTRO_FEATURES',
> > '${PACKAGECONFIG_OPENGL}', d)}"
> >
> > -PACKAGECONFIG_remove_imxfbdev = "kms"
> > -PACKAGECONFIG_append_imxfbdev = " fbdev clients"
> > -PACKAGECONFIG_append_imxgpu = " imxgpu"
> > -PACKAGECONFIG_append_imxgpu2d = " imxg2d"
> > +PACKAGECONFIG:remove:imxfbdev = "kms"
> > +PACKAGECONFIG:append:imxfbdev = " fbdev clients"
> > +PACKAGECONFIG:append:imxgpu = " imxgpu"
> > +PACKAGECONFIG:append:imxgpu2d = " imxg2d"
> >
> > # Clients support
> > SIMPLE_CLIENTS = "all"
> > -SIMPLE_CLIENTS_imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
> > +SIMPLE_CLIENTS:imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
> > PACKAGECONFIG[xwayland] = "-Dxwayland=true,-
> > Dxwayland=false,libxcursor"
> > PACKAGECONFIG[clients] = "-Dsimple-clients=${SIMPLE_CLIENTS} -Ddemo-
> > clients=true,-Dsimple-clients= -Ddemo-clients=false"
> > # Weston with i.MX GPU support
> > diff --git a/recipes-graphics/xinput-calibrator/pointercal-
> > xinput_%.bbappend b/recipes-graphics/xinput-calibrator/pointercal-
> > xinput_%.bbappend
> > index a9c60f3ec4f9..d112b274a75d 100644
> > --- a/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> > +++ b/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> > @@ -1,2 +1,2 @@
> > # Append path for freescale layer to include bsp pointercal.xinput
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > diff --git a/recipes-graphics/xorg-driver/xf86-video-imx-
> > vivante_6.4.0.p0.0.bb b/recipes-graphics/xorg-driver/xf86-video-imx-
> > vivante_6.4.0.p0.0.bb
> > index 069008c04479..836a16ba08cc 100644
> > --- a/recipes-graphics/xorg-driver/xf86-video-imx-
> > vivante_6.4.0.p0.0.bb
> > +++ b/recipes-graphics/xorg-driver/xf86-video-imx-
> > vivante_6.4.0.p0.0.bb
> > @@ -34,7 +34,7 @@ TARGET_CC_ARCH += "${LDFLAGS}"
> >
> > PACKAGES =+ "xserver-xorg-extension-viv-autohdmi"
> >
> > -do_install_append () {
> > +do_install:append () {
> > install -d ${D}${includedir}
> > cp -axr ${S}/EXA/src/vivante_gal/vivante_priv.h
> > ${D}${includedir}
> > cp -axr ${S}/EXA/src/vivante_gal/vivante_gal.h ${D}${includedir}
> > diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-
> > config_%.bbappend b/recipes-graphics/xorg-xserver/xserver-xf86-
> > config_%.bbappend
> > index ceb438e37115..3fe677b34770 100644
> > --- a/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> > +++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> > @@ -1,2 +1,2 @@
> > # Append path for freescale layer to include bsp xorg.conf
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > diff --git a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > index 22d950c796cc..34e2ed82377b 100644
> > --- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > +++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > @@ -1,7 +1,7 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> >
> > -SRC_URI_append_use-mainline-bsp = "
> > file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
> > -SRC_URI_append_imxgpu = " \
> > +SRC_URI:append:use-mainline-bsp = "
> > file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
> > +SRC_URI:append:imxgpu = " \
> > file://0003-Remove-check-for-useSIGIO-option.patch \
> >
> > file://0001-MGS-5186-Per-Specification-EGL_NATIVE_PIXMAP_KHR-req.patch
> > \
> >
> > file://0001-glamor-glamor_egl.c-EGL_NATIVE_PIXMAP_KHR-do-not-req.patch
> > \
> > @@ -10,7 +10,7 @@ SRC_URI_append_imxgpu = " \
> > "
> >
> > IMX_OPENGL_PKGCONFIGS_REMOVE = ""
> > -IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
> > -OPENGL_PKGCONFIGS_remove_mx6 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > -OPENGL_PKGCONFIGS_remove_mx7 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > -OPENGL_PKGCONFIGS_remove_imxdrm = "dri glx"
> > +IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
> > +OPENGL_PKGCONFIGS:remove:mx6 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > +OPENGL_PKGCONFIGS:remove:mx7 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > +OPENGL_PKGCONFIGS:remove:imxdrm = "dri glx"
> > diff --git a/recipes-graphics/xwayland/xwayland_%.bbappend b/recipes-
> > graphics/xwayland/xwayland_%.bbappend
> > index c26bb20d2caf..b3e79e09182f 100644
> > --- a/recipes-graphics/xwayland/xwayland_%.bbappend
> > +++ b/recipes-graphics/xwayland/xwayland_%.bbappend
> > @@ -1,4 +1,4 @@
> > IMX_OPENGL_PKGCONFIGS_REMOVE = ""
> > -IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
> > -OPENGL_PKGCONFIGS_remove_mx6 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > -OPENGL_PKGCONFIGS_remove_mx7 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > +IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
> > +OPENGL_PKGCONFIGS:remove:mx6 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > +OPENGL_PKGCONFIGS:remove:mx7 =
> > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > diff --git a/recipes-kernel/ceetm/ceetm_git.bb b/recipes-
> > kernel/ceetm/ceetm_git.bb
> > index 2e92ad49e5a4..45c3f19edc1a 100644
> > --- a/recipes-kernel/ceetm/ceetm_git.bb
> > +++ b/recipes-kernel/ceetm/ceetm_git.bb
> > @@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "
> > file://COPYING;md5=bac620b9883d38a84dfb73ca7122d915"
> >
> > SRC_URI = "git://source.codeaurora.org/external/qoriq/qoriq-
> > components/ceetm;nobranch=1"
> > SRCREV = "6a7f2ec2091df2f4380cb8d25a36c399aed5af1b"
> > -SRC_URI_append = " file://0001-Makefile-update-CFLAGS.patch \
> > +SRC_URI:append = " file://0001-Makefile-update-CFLAGS.patch \
> > file://0001-use-new-api-tc_print_rate.patch \
> > "
> > DEPENDS = "iproute2"
> > diff --git a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > index feddc8faac80..36e2065db7c4 100644
> > --- a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > +++ b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > @@ -14,7 +14,7 @@ export KERNEL_PATH
> >
> > INHIBIT_PACKAGE_STRIP = "1"
> >
> > -do_compile_prepend() {
> > +do_compile:prepend() {
> > sed -i -e 's,EXTRA_CFLAGS += -I$(PWD),EXTRA_CFLAGS += -I${S},'
> > ${S}/armodule/source/Makefile
> > }
> >
> > diff --git a/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > index 350ba186aeb2..903c53a48731 100644
> > --- a/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > +++ b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > @@ -11,7 +11,7 @@ SRCREV = "74d662707558290f070f9589177db730444bc435"
> > S = "${WORKDIR}/git"
> >
> > do_configure[depends] += "virtual/kernel:do_shared_workdir"
> > -do_compile_prepend () {
> > +do_compile:prepend () {
> > cd ${S}/kernel
> > }
> >
> > diff --git a/recipes-kernel/kernel-modules/kernel-module-qcacld-
> > lea.inc b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> > index 0b23a47c04bb..a7b8a4e68ce7 100644
> > --- a/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> > +++ b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> > @@ -20,4 +20,4 @@ EXTRA_OEMAKE += " \
> > "
> >
> > COMPATIBLE_MACHINE = "(imx)"
> > -COMPATIBLE_HOST_libc-musl = 'null'
> > +COMPATIBLE_HOST:libc-musl = 'null'
> > diff --git a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > index 63527d1324cc..95dd72fb894c 100644
> > --- a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > +++ b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > @@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by
> > the Freescale Community \
> > that produces a Manufacturing Tool compatible Linux Kernel to be
> > used in updater \
> > environment"
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
> > require linux-fslc-lts_${PV}.bb
> > require linux-mfgtool.inc
> >
> > diff --git a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > index c155ebb969ed..09d35c9152ea 100644
> > --- a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > +++ b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > @@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by
> > the Freescale Community \
> > that produces a Manufacturing Tool compatible Linux Kernel to be
> > used in updater \
> > environment"
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
> > require linux-fslc_${PV}.bb
> > require linux-mfgtool.inc
> >
> > diff --git a/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > b/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > index c656fa557e26..05e8b12c5bfe 100644
> > --- a/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > +++ b/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > @@ -75,4 +75,4 @@ PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> > # Restrict this recipe to NXP BSP only, this recipe is not
> > compatible
> > # with mainline BSP
> > COMPATIBLE_HOST = '(null)'
> > -COMPATIBLE_HOST_use-nxp-bsp = '.*'
> > +COMPATIBLE_HOST:use-nxp-bsp = '.*'
> > diff --git a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > index 0a9f5259ed94..311245b19b6d 100644
> > --- a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > +++ b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > @@ -5,7 +5,7 @@ SUMMARY = "Produces a Manufacturing Tool compatible
> > Linux Kernel"
> > DESCRIPTION = "Linux Kernel provided and supported by Freescale that
> > produces a \
> > Manufacturing Tool compatible Linux Kernel to be used in updater
> > environment"
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-imx:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-imx:"
> > require linux-imx_${PV}.bb
> > require linux-mfgtool.inc
> >
> > diff --git a/recipes-kernel/linux/linux-qoriq.inc b/recipes-
> > kernel/linux/linux-qoriq.inc
> > index 4d134b476599..2333990fb79c 100644
> > --- a/recipes-kernel/linux/linux-qoriq.inc
> > +++ b/recipes-kernel/linux/linux-qoriq.inc
> > @@ -7,12 +7,12 @@ LICENSE = "GPLv2"
> >
> > S = "${WORKDIR}/git"
> >
> > -DEPENDS_append = " libgcc"
> > +DEPENDS:append = " libgcc"
> > # not put Images into /boot of rootfs, install kernel-image if
> > needed
> > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> >
> > -KERNEL_CC_append = " ${TOOLCHAIN_OPTIONS}"
> > -KERNEL_LD_append = " ${TOOLCHAIN_OPTIONS}"
> > +KERNEL_CC:append = " ${TOOLCHAIN_OPTIONS}"
> > +KERNEL_LD:append = " ${TOOLCHAIN_OPTIONS}"
> > KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
> >
> > ZIMAGE_BASE_NAME = "zImage-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-
> > ${DATETIME}"
> > @@ -24,9 +24,9 @@ PV = "${LINUX_VERSION}+git${SRCPV}"
> > SCMVERSION ?= "y"
> > LOCALVERSION = ""
> > DELTA_KERNEL_DEFCONFIG ?= ""
> > -DELTA_KERNEL_DEFCONFIG_prepend_qoriq-arm64 = "lsdk.config "
> > -DELTA_KERNEL_DEFCONFIG_prepend_fsl-lsch2-32b = "multi_v7_lpae.config
> > multi_v8.config lsdk.config "
> > -DELTA_KERNEL_DEFCONFIG_prepend_ls102xa = "multi_v7_lpae.config
> > lsdk.config "
> > +DELTA_KERNEL_DEFCONFIG:prepend:qoriq-arm64 = "lsdk.config "
> > +DELTA_KERNEL_DEFCONFIG:prepend:fsl-lsch2-32b = "multi_v7_lpae.config
> > multi_v8.config lsdk.config "
> > +DELTA_KERNEL_DEFCONFIG:prepend:ls102xa = "multi_v7_lpae.config
> > lsdk.config "
> >
> > do_merge_delta_config[depends] +=
> > "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot bison-
> > native:do_populate_sysroot"
> > do_merge_delta_config[dirs] = "${B}"
> > @@ -56,11 +56,11 @@ do_merge_delta_config() {
> > addtask merge_delta_config before do_kernel_localversion after
> > do_patch
> >
> > # The link of dts folder is needed for 32b compile of aarch64
> > targets(e.g. ls1043ardb-32b)
> > -do_compile_prepend_fsl-lsch2-32b() {
> > +do_compile:prepend:fsl-lsch2-32b() {
> > ln -sfT ${STAGING_KERNEL_DIR}/arch/arm64/boot/dts/freescale
> > ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
> > }
> >
> > -do_install_prepend_fsl-lsch2-32b() {
> > +do_install:prepend:fsl-lsch2-32b() {
> > rm -f ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
> > }
> >
> > diff --git a/recipes-multimedia/alsa/alsa-lib_%.bbappend b/recipes-
> > multimedia/alsa/alsa-lib_%.bbappend
> > index 80c11f33204f..d76c45d1e162 100644
> > --- a/recipes-multimedia/alsa/alsa-lib_%.bbappend
> > +++ b/recipes-multimedia/alsa/alsa-lib_%.bbappend
> > @@ -1,4 +1,4 @@
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> >
> > IMX_PATCH = " \
> > file://0001-add-conf-for-multichannel-support-in-imx.patch \
> > @@ -6,6 +6,6 @@ IMX_PATCH = " \
> > file://0005-add-ak4458-conf-for-multichannel-support.patch \
> > file://0006-add-conf-for-iMX-XCVR-sound-card.patch \
> > "
> > -SRC_URI_append_imx = "${IMX_PATCH}"
> > +SRC_URI:append:imx = "${IMX_PATCH}"
> >
> > -PACKAGE_ARCH_imx = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:imx = "${MACHINE_SOCARCH}"
> > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-
> > libav_1.16.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-
> > libav_1.16.0.bb
> > index 3f1ec99d9560..cf640e13779e 100644
> > --- a/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> > @@ -50,8 +50,8 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-
> > os=linux \
> > --cross-prefix='${HOST_PREFIX}'"
> >
> > # Disable assembly optimizations for X32, as this libav lacks the
> > support
> > -PACKAGECONFIG_remove_linux-gnux32 = "yasm"
> > -LIBAV_EXTRA_CONFIGURE_COMMON_ARG_append_linux-gnux32 = " --disable-
> > asm"
> > +PACKAGECONFIG:remove:linux-gnux32 = "yasm"
> > +LIBAV_EXTRA_CONFIGURE_COMMON_ARG:append:linux-gnux32 = " --disable-
> > asm"
> >
> > LIBAV_EXTRA_CONFIGURE_COMMON = \
> > '${LIBAV_EXTRA_CONFIGURE}="${LIBAV_EXTRA_CONFIGURE_COMMON_ARG}"'
> > @@ -63,8 +63,8 @@ FILES_${PN}-dev += "${libdir}/gstreamer-1.0/*.la"
> > FILES_${PN}-staticdev += "${libdir}/gstreamer-1.0/*.a"
> >
> > # http://errors.yoctoproject.org/Errors/Details/20493/
> > -ARM_INSTRUCTION_SET_armv4 = "arm"
> > -ARM_INSTRUCTION_SET_armv5 = "arm"
> > +ARM_INSTRUCTION_SET:armv4 = "arm"
> > +ARM_INSTRUCTION_SET:armv5 = "arm"
> >
> > # ffmpeg/libav disables PIC on some platforms (e.g. x86-32)
> > INSANE_SKIP_${PN} = "textrel"
> > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > bad_1.16.3.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-
> > plugins-bad_1.16.3.imx.bb
> > index 6925611ac080..376764583179 100644
> > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > bad_1.16.3.imx.bb
> > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > bad_1.16.3.imx.bb
> > @@ -1,14 +1,14 @@
> > require recipes-multimedia/gstreamer/gstreamer1.0-plugins-common.inc
> >
> > -DEPENDS_append_imxgpu2d = " virtual/libg2d"
> > -DEPENDS_append_mx8 = " libdrm"
> > +DEPENDS:append:imxgpu2d = " virtual/libg2d"
> > +DEPENDS:append:mx8 = " libdrm"
> >
> > -PACKAGECONFIG_append_mx8 = " kms"
> > +PACKAGECONFIG:append:mx8 = " kms"
> >
> > DEFAULT_PREFERENCE = "-1"
> >
> > -PACKAGE_ARCH_imxpxp = "${MACHINE_SOCARCH}"
> > -PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:imxpxp = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
> >
> > GST1.0-PLUGINS-BAD_SRC ?=
> > "gitsm://source.codeaurora.org/external/imx/gst-plugins-
> > bad.git;protocol=https"
> > SRCBRANCH = "MM_04.05.07_2011_L5.4.70"
> > @@ -37,7 +37,7 @@ DEPENDS += "gstreamer1.0-plugins-base"
> > inherit gobject-introspection
> >
> > PACKAGECONFIG_GL ?= "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gl', '', d)}"
> > -PACKAGECONFIG_GL_imxpxp = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gles2', '', d)}"
> > +PACKAGECONFIG_GL:imxpxp = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gles2', '', d)}"
> >
> > PACKAGECONFIG ??= " \
> > ${GSTREAMER_ORC} \
> > @@ -163,8 +163,8 @@ EXTRA_OEMESON += " \
> >
> > export OPENCV_PREFIX = "${STAGING_DIR_TARGET}${prefix}"
> >
> > -ARM_INSTRUCTION_SET_armv4 = "arm"
> > -ARM_INSTRUCTION_SET_armv5 = "arm"
> > +ARM_INSTRUCTION_SET:armv4 = "arm"
> > +ARM_INSTRUCTION_SET:armv5 = "arm"
> >
> > FILES_${PN}-freeverb += "${datadir}/gstreamer-
> > 1.0/presets/GstFreeverb.prs"
> > FILES_${PN}-opencv += "${datadir}/gst-plugins-bad/1.0/opencv*"
> > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > base_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-
> > plugins-base_1.16.%.bbappend
> > index d92bdf3ca3c2..1c62f31dc227 100644
> > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > base_1.16.%.bbappend
> > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > base_1.16.%.bbappend
> > @@ -1,5 +1,5 @@
> > -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl x11', 'opengl', '', d)}"
> > -PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gles2 egl', '', d)}"
> > +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl x11', 'opengl', '', d)}"
> > +PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gles2 egl', '', d)}"
> >
> > # For mainline BSP we need to enable 'gbm' Window system
> > -PACKAGECONFIG_GL_use-mainline-bsp =
> > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm',
> > '', d)}"
> > +PACKAGECONFIG_GL:use-mainline-bsp =
> > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm',
> > '', d)}"
> > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > base_1.16.2.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-
> > plugins-base_1.16.2.imx.bb
> > index db0b740fa22b..01db6125d67d 100644
> > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > base_1.16.2.imx.bb
> > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > base_1.16.2.imx.bb
> > @@ -20,7 +20,7 @@ SRC_URI = "${GST1.0-PLUGINS-
> > BASE_SRC};branch=${SRCBRANCH} \
> > S = "${WORKDIR}/git"
> >
> > DEPENDS += "iso-codes util-linux zlib"
> > -DEPENDS_append_imxgpu2d = " virtual/libg2d"
> > +DEPENDS:append:imxgpu2d = " virtual/libg2d"
> >
> > inherit use-imx-headers gobject-introspection gtk-doc
> >
> > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > good_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-
> > plugins-good_1.16.%.bbappend
> > index 8565c6a53377..7e72cdaa2273 100644
> > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > good_1.16.%.bbappend
> > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > good_1.16.%.bbappend
> > @@ -1,3 +1,3 @@
> > -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl x11', 'opengl', '', d)}"
> > -PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gles2 egl', '', d)}"
> > -PACKAGECONFIG_GL_use-mainline-bsp =
> > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '',
> > d)}"
> > +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl x11', 'opengl', '', d)}"
> > +PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > 'opengl', 'gles2 egl', '', d)}"
> > +PACKAGECONFIG_GL:use-mainline-bsp =
> > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '',
> > d)}"
> > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > imx_2.0.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > imx_2.0.0.bb
> > index 7c6025dd900e..439c4430f407 100644
> > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> > @@ -28,22 +28,22 @@ inherit pkgconfig meson use-imx-headers
> > # is needed to improve performance.
> > LIBG2D_DPU_OPTION = "-Dg2d-based-on-dpu=false"
> > LIBG2D_DEPENDENCIES = "virtual/libg2d"
> > -LIBG2D_DPU_OPTION_imxdpu = "-Dg2d-based-on-dpu=true"
> > -LIBG2D_DEPENDENCIES_imxdpu = "virtual/libg2d libdrm"
> > +LIBG2D_DPU_OPTION:imxdpu = "-Dg2d-based-on-dpu=true"
> > +LIBG2D_DEPENDENCIES:imxdpu = "virtual/libg2d libdrm"
> >
> > EXTRA_OEMESON += "-Dimx-headers-path=${STAGING_INCDIR_IMX}"
> >
> > PACKAGECONFIG ?= "uniaudiodec"
> > -PACKAGECONFIG_append_imxgpu2d = " g2d"
> > -PACKAGECONFIG_append_imxvpu = " vpu"
> > -PACKAGECONFIG_append_imxipu = " ipu"
> > -PACKAGECONFIG_append_imxpxp = " pxp"
> > +PACKAGECONFIG:append:imxgpu2d = " g2d"
> > +PACKAGECONFIG:append:imxvpu = " vpu"
> > +PACKAGECONFIG:append:imxipu = " ipu"
> > +PACKAGECONFIG:append:imxpxp = " pxp"
> > # The custom imxv4l2 elements are only available on the i.MX6.
> > # The 2D blitter sinks require an MXC framebuffer, which
> > # is not available anymore on the i.MX8 (since these SoCs
> > # now use KMS instead of the old Linux framebuffer).
> > -PACKAGECONFIG_append_mx6 = " imx2dvideosink v4l2"
> > -PACKAGECONFIG_append_mx7 = " imx2dvideosink"
> > +PACKAGECONFIG:append:mx6 = " imx2dvideosink v4l2"
> > +PACKAGECONFIG:append:mx7 = " imx2dvideosink"
> >
> > PACKAGECONFIG[g2d] = "-Dg2d=enabled ${LIBG2D_DPU_OPTION},-
> > Dg2d=disabled,${LIBG2D_DEPENDENCIES}"
> > PACKAGECONFIG[pxp] = "-Dpxp=enabled,-Dpxp=disabled,"
> > diff --git a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > index c8bb6cd8a45a..9f58aa64d5dc 100644
> > --- a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > +++ b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > @@ -8,9 +8,9 @@ LICENSE = "GPLv2 & LGPLv2 & LGPLv2.1"
> > SECTION = "multimedia"
> >
> > DEPENDS = "imx-codec imx-parser gstreamer1.0 gstreamer1.0-plugins-
> > base gstreamer1.0-plugins-bad"
> > -DEPENDS_append_mx6 = " imx-lib"
> > -DEPENDS_append_mx7 = " imx-lib"
> > -DEPENDS_append_imxvpu = " imx-vpuwrap libdrm"
> > +DEPENDS:append:mx6 = " imx-lib"
> > +DEPENDS:append:mx7 = " imx-lib"
> > +DEPENDS:append:imxvpu = " imx-vpuwrap libdrm"
> >
> > # For backwards compatibility
> > RREPLACES_${PN} = "gst1.0-fsl-plugin"
> > @@ -31,14 +31,14 @@ S = "${WORKDIR}/git"
> >
> > inherit autotools pkgconfig use-imx-headers
> >
> > -PLATFORM_mx6 = "MX6"
> > -PLATFORM_mx6sl = "MX6SL"
> > -PLATFORM_mx6sx = "MX6SX"
> > -PLATFORM_mx6ul = "MX6UL"
> > -PLATFORM_mx6sll = "MX6SLL"
> > -PLATFORM_mx7= "MX7D"
> > -PLATFORM_mx7ulp= "MX7ULP"
> > -PLATFORM_mx8 = "MX8"
> > +PLATFORM:mx6 = "MX6"
> > +PLATFORM:mx6sl = "MX6SL"
> > +PLATFORM:mx6sx = "MX6SX"
> > +PLATFORM:mx6ul = "MX6UL"
> > +PLATFORM:mx6sll = "MX6SLL"
> > +PLATFORM:mx7= "MX7D"
> > +PLATFORM:mx7ulp= "MX7ULP"
> > +PLATFORM:mx8 = "MX8"
> >
> > # Todo add a mechanism to map possible build targets
> > EXTRA_OECONF = "PLATFORM=${PLATFORM} \
> > @@ -55,7 +55,7 @@ RDEPENDS_${PN} += "imx-parser ${BEEP_RDEPENDS}
> > gstreamer1.0-plugins-good-id3demu
> > # overlaysink rely on G2D,
> > # cannot be supported on i.MX6SLL & i.MX6UL & i.MX6ULL & i.MX7D
> > PACKAGECONFIG ?= ""
> > -PACKAGECONFIG_imxgpu2d = "overlaysink"
> > +PACKAGECONFIG:imxgpu2d = "overlaysink"
> >
> >
> > # FIXME: Add all features
> > diff --git a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > index 76a52f26cb64..4bb76030ed62 100644
> > --- a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > +++ b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > @@ -21,14 +21,14 @@ EXTRA_OECONF =
> > "${@bb.utils.contains('TUNE_FEATURES', 'aarch64', '--enable-armv8
> > bb.utils.contains('TUNE_FEATURES',
> > 'callconvention-hard', '--enable-fhw', '', d), d)}"
> >
> > PACKAGECONFIG ?= ""
> > -PACKAGECONFIG_imxvpu = "vpu"
> > +PACKAGECONFIG:imxvpu = "vpu"
> >
> > # We need to ensure we don't have '-src' package overrided
> > PACKAGE_DEBUG_SPLIT_STYLE = 'debug-without-src'
> >
> > PACKAGECONFIG[vpu] = "--enable-vpu,--disable-vpu,virtual/imxvpu"
> >
> > -do_install_append() {
> > +do_install:append() {
> > # LTIB move the files around or gst-fsl-plugin won't find them
> > for p in $(find ${D}${libdir}/imx-mm -mindepth 2 -maxdepth 2 -
> > not -type d); do
> > mv $p ${D}${libdir}
> > @@ -85,7 +85,7 @@ python __set_metapkg_rdepends() {
> > codec_pkgs = oe.utils.packages_filter_out_system(d)
> > codec_pkgs = filter(lambda x: x not in ['imx-codec-test-bin',
> > 'imx-codec-test-source'],
> > codec_pkgs)
> > - d.appendVar('RDEPENDS_imx-codec-meta', ' ' + '
> > '.join(codec_pkgs))
> > + d.appendVar('RDEPENDS:imx-codec-meta', ' ' + '
> > '.join(codec_pkgs))
> > }
> >
> > PACKAGESPLITFUNCS =+ "__split_libfslcodec_plugins
> > __set_metapkg_rdepends"
> > diff --git a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > index 2b0282351840..f77e33f76d07 100644
> > --- a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > +++ b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > @@ -8,7 +8,7 @@ SECTION = "multimedia"
> > LIC_FILES_CHKSUM = "
> > file://COPYING;md5=228c72f2a91452b8a03c4cab30f30ef9"
> >
> > DEPENDS = "virtual/imxvpu"
> > -DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
> > +DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
> >
> > SRC_URI = "git://github.com/NXP/imx-
> > vpuwrap.git;protocol=https;branch=${SRCBRANCH}"
> >
> > @@ -19,7 +19,7 @@ S = "${WORKDIR}/git"
> >
> > inherit autotools pkgconfig
> >
> > -do_install_append() {
> > +do_install:append() {
> > # FIXME: Drop examples for now
> > rm -r ${D}${datadir}
> > }
> > diff --git a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > index f66eff27568c..372d78dcb859 100644
> > --- a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > +++ b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > @@ -15,10 +15,10 @@ S = "${WORKDIR}/git"
> >
> > inherit waf pkgconfig use-imx-headers
> >
> > -IMX_PLATFORM_mx6 = "imx6"
> > -IMX_PLATFORM_mx8mq = "imx8m"
> > -IMX_PLATFORM_mx8mm = "imx8mm"
> > -IMX_PLATFORM_mx8mp = "imx8mm"
> > +IMX_PLATFORM:mx6 = "imx6"
> > +IMX_PLATFORM:mx8mq = "imx8m"
> > +IMX_PLATFORM:mx8mm = "imx8mm"
> > +IMX_PLATFORM:mx8mp = "imx8mm"
> >
> > EXTRA_OECONF = "--imx-platform=${IMX_PLATFORM} --libdir=${libdir} --
> > imx-headers=${STAGING_INCDIR_IMX} --sysroot-path=${RECIPE_SYSROOT}"
> >
> > diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > index 78a17864724a..ae69be4c8601 100644
> > --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > @@ -1,21 +1,21 @@
> >
> > -CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
> > +CACHED_CONFIGUREVARS:append:mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
> >
> > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/imx:"
> > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}/imx:"
> >
> > -SRC_URI_append_mx6 = " file://daemon.conf file://default.pa"
> > -SRC_URI_append_mx7 = " file://daemon.conf file://default.pa \
> > +SRC_URI:append:mx6 = " file://daemon.conf file://default.pa"
> > +SRC_URI:append:mx7 = " file://daemon.conf file://default.pa \
> >
> > file://pulseaudio-remove-the-control-for-speaker-headphone-widge.patch
> > \
> > "
> > -SRC_URI_append_mx8 = " file://daemon.conf file://default.pa"
> > +SRC_URI:append:mx8 = " file://daemon.conf file://default.pa"
> >
> > -do_install_append() {
> > +do_install:append() {
> > if [ -e "${WORKDIR}/daemon.conf" ] && [ -e
> > "${WORKDIR}/default.pa" ]; then
> > install -m 0644 ${WORKDIR}/daemon.conf
> > ${D}${sysconfdir}/pulse/daemon.conf
> > install -m 0644 ${WORKDIR}/default.pa
> > ${D}${sysconfdir}/pulse/default.pa
> > fi
> > }
> >
> > -PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
> > -PACKAGE_ARCH_mx7 = "${MACHINE_SOCARCH}"
> > -PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:mx6 = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:mx7 = "${MACHINE_SOCARCH}"
> > +PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
> > diff --git a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > index 58b6b8a45b18..b2ac77483ef8 100644
> > --- a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > +++ b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > @@ -21,8 +21,8 @@ inherit python3native systemd
> > SYSTEMD_SERVICE_${PN} = "tee-supplicant.service"
> >
> > OPTEE_ARCH ?= "arm32"
> > -OPTEE_ARCH_armv7a = "arm32"
> > -OPTEE_ARCH_aarch64 = "arm64"
> > +OPTEE_ARCH:armv7a = "arm32"
> > +OPTEE_ARCH:aarch64 = "arm64"
> >
> > EXTRA_OEMAKE = "ARCH=${OPTEE_ARCH} O=${B}"
> >
> > diff --git a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > index 712b1aa69046..c0b3b7631269 100644
> > --- a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > +++ b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > @@ -22,23 +22,23 @@ inherit deploy python3native autotools
> >
> > # The platform flavor corresponds to the Yocto machine without the
> > leading 'i'.
> > PLATFORM_FLAVOR = "${@d.getVar('MACHINE')[1:]}"
> > -PLATFORM_FLAVOR_imx6qpdlsolox = "mx6qsabresd"
> > -PLATFORM_FLAVOR_imx6ul7d = "mx6ulevk"
> > -PLATFORM_FLAVOR_imx6ull14x14evk = "mx6ullevk"
> > -PLATFORM_FLAVOR_imx6ull9x9evk = "mx6ullevk"
> > -PLATFORM_FLAVOR_imx6ulz-14x14-evk = "mx6ulzevk"
> > -PLATFORM_FLAVOR_mx8mq = "mx8mqevk"
> > -PLATFORM_FLAVOR_mx8mm = "mx8mmevk"
> > -PLATFORM_FLAVOR_mx8mn = "mx8mnevk"
> > -PLATFORM_FLAVOR_mx8mp = "mx8mpevk"
> > -PLATFORM_FLAVOR_mx8qm = "mx8qmmek"
> > -PLATFORM_FLAVOR_mx8qxp = "mx8qxpmek"
> > -PLATFORM_FLAVOR_mx8dx = "mx8dxmek"
> > -PLATFORM_FLAVOR_mx8dxl = "mx8dxlevk"
> > +PLATFORM_FLAVOR:imx6qpdlsolox = "mx6qsabresd"
> > +PLATFORM_FLAVOR:imx6ul7d = "mx6ulevk"
> > +PLATFORM_FLAVOR:imx6ull14x14evk = "mx6ullevk"
> > +PLATFORM_FLAVOR:imx6ull9x9evk = "mx6ullevk"
> > +PLATFORM_FLAVOR:imx6ulz-14x14-evk = "mx6ulzevk"
> > +PLATFORM_FLAVOR:mx8mq = "mx8mqevk"
> > +PLATFORM_FLAVOR:mx8mm = "mx8mmevk"
> > +PLATFORM_FLAVOR:mx8mn = "mx8mnevk"
> > +PLATFORM_FLAVOR:mx8mp = "mx8mpevk"
> > +PLATFORM_FLAVOR:mx8qm = "mx8qmmek"
> > +PLATFORM_FLAVOR:mx8qxp = "mx8qxpmek"
> > +PLATFORM_FLAVOR:mx8dx = "mx8dxmek"
> > +PLATFORM_FLAVOR:mx8dxl = "mx8dxlevk"
> >
> > OPTEE_ARCH ?= "arm32"
> > -OPTEE_ARCH_armv7a = "arm32"
> > -OPTEE_ARCH_aarch64 = "arm64"
> > +OPTEE_ARCH:armv7a = "arm32"
> > +OPTEE_ARCH:aarch64 = "arm64"
> >
> > # Optee-os can be built for 32 bits and 64 bits at the same time
> > # as long as the compilers are correctly defined.
> > diff --git a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > index a8a1b245e496..4a6aec56dd45 100644
> > --- a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > +++ b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > @@ -20,11 +20,11 @@ SRCREV =
> > "0c998f42a3fb87b9f2929955cf4b0116cc515091"
> > inherit python3native
> >
> > OPTEE_ARCH ?= "arm32"
> > -OPTEE_ARCH_armv7a = "arm32"
> > -OPTEE_ARCH_aarch64 = "arm64"
> > +OPTEE_ARCH:armv7a = "arm32"
> > +OPTEE_ARCH:aarch64 = "arm64"
> >
> > TA_DEV_KIT_DIR_arm = "${STAGING_INCDIR}/optee/export-user_ta_arm32/"
> > -TA_DEV_KIT_DIR_aarch64 = "${STAGING_INCDIR}/optee/export-
> > user_ta_arm64/"
> > +TA_DEV_KIT_DIR:aarch64 = "${STAGING_INCDIR}/optee/export-
> > user_ta_arm64/"
> >
> > CFLAGS += "--sysroot=${STAGING_DIR_HOST}"
> > CXXFLAGS += "--sysroot=${STAGING_DIR_HOST}"
> > diff --git a/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > index b8d764ff5e12..556f13518d7e 100644
> > --- a/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > +++ b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > @@ -19,9 +19,9 @@ SRCREV = "0cb01f7f6aee552ead49990c06f69f73f459cc65"
> > S = "${WORKDIR}/git"
> >
> > OPTEEMACHINE ?= "${MACHINE}"
> > -OPTEEMACHINE_ls1088ardb-pb = "ls1088ardb"
> > -OPTEEMACHINE_ls1046afrwy = "ls1046ardb"
> > -OPTEEMACHINE_lx2162aqds = "lx2160aqds"
> > +OPTEEMACHINE:ls1088ardb-pb = "ls1088ardb"
> > +OPTEEMACHINE:ls1046afrwy = "ls1046ardb"
> > +OPTEEMACHINE:lx2162aqds = "lx2160aqds"
> >
> > EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE} CFG_ARM64_core=y \
> > ARCH=arm \
> > @@ -31,10 +31,10 @@ EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE}
> > CFG_ARM64_core=y \
> > LDFLAGS= \
> > LIBGCC_LOCATE_CFLAGS=--sysroot=${STAGING_DIR_HOST} \
> > "
> > -EXTRA_OEMAKE_append_lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-
> > lx2160a-qds.dts CFG_EMBED_DT=y"
> > +EXTRA_OEMAKE:append:lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-
> > lx2160a-qds.dts CFG_EMBED_DT=y"
> >
> > -OPTEE_ARCH_armv7a = "arm32"
> > -OPTEE_ARCH_aarch64 = "arm64"
> > +OPTEE_ARCH:armv7a = "arm32"
> > +OPTEE_ARCH:aarch64 = "arm64"
> >
> > do_compile() {
> > unset LDFLAGS
> > diff --git a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-
> > tinyxml2.cpp.patch b/recipes-support/opencv/opencv/0001-Use-Os-to-
> > compile-tinyxml2.cpp.patch
> > index c5a64387f525..7fdf1dd8a62b 100644
> > --- a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-
> > tinyxml2.cpp.patch
> > +++ b/recipes-support/opencv/opencv/0001-Use-Os-to-compile-
> > tinyxml2.cpp.patch
> > @@ -21,10 +21,10 @@ index 56ca9e310..99b7a33f6 100644
> >
> > set(filter_srcs
> > "${CMAKE_CURRENT_LIST_DIR}/src/tinyxml2/tinyxml2.cpp")
> > if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
> > -- ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-
> > suggest-override") # GCC
> > -+ ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-
> > suggest-override -Os") # GCC
> > +- ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-
> > suggest-override") # GCC
> > ++ ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-
> > suggest-override -Os") # GCC
> > elseif(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
> > - ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-
> > inconsistent-missing-override") # Clang
> > + ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-
> > inconsistent-missing-override") # Clang
> > endif()
> > --
> > 2.28.0
> > diff --git a/recipes-support/opencv/opencv_4.5.2.imx.bb b/recipes-
> > support/opencv/opencv_4.5.2.imx.bb
> > index a86fd3ecb3da..402eab9bb52d 100644
> > --- a/recipes-support/opencv/opencv_4.5.2.imx.bb
> > +++ b/recipes-support/opencv/opencv_4.5.2.imx.bb
> > @@ -11,8 +11,8 @@ SECTION = "libs"
> > LICENSE = "Apache-2.0"
> > LIC_FILES_CHKSUM = "
> > file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
> >
> > -ARM_INSTRUCTION_SET_armv4 = "arm"
> > -ARM_INSTRUCTION_SET_armv5 = "arm"
> > +ARM_INSTRUCTION_SET:armv4 = "arm"
> > +ARM_INSTRUCTION_SET:armv5 = "arm"
> >
> > DEPENDS = "libtool swig-native bzip2 zlib glib-2.0 libwebp"
> >
> > @@ -59,7 +59,7 @@ SRC_URI =
> > "git://github.com/opencv/opencv.git;name=opencv \
> > file://0001-Make-ts-module-external.patch \
> >
> > file://0001-sfm-link-with-Glog_LIBS.patch;patchdir=../contrib \
> > "
> > -SRC_URI_append_riscv64 = "
> > file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
> > +SRC_URI:append:riscv64 = "
> > file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
> >
> > S = "${WORKDIR}/git"
> >
> > @@ -106,7 +106,7 @@ EXTRA_OECMAKE = "-
> > DOPENCV_EXTRA_MODULES_PATH=${WORKDIR}/contrib/modules \
> > ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.1", "-
> > DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -
> > DENABLE_SSE41=1", "", d)} \
> > ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.2", "-
> > DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -
> > DENABLE_SSE41=1 -DENABLE_SSE42=1", "", d)} \
> > "
> > -EXTRA_OECMAKE_append_x86 = " -DX86=ON"
> > +EXTRA_OECMAKE:append:x86 = " -DX86=ON"
> >
> > PACKAGECONFIG ??= "gapi python3 eigen jpeg png tiff v4l libv4l
> > gstreamer samples tbb gphoto2 \
> > ${@bb.utils.contains("DISTRO_FEATURES", "x11", "gtk", "", d)} \
> > @@ -158,7 +158,7 @@ PACKAGES +=
> > "${@bb.utils.contains('PACKAGECONFIG', 'samples', '${PN}-samples', '
> > ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-
> > ${BPN}', '', d)} \
> > ${PN}-apps"
> >
> > -python populate_packages_prepend () {
> > +python populate_packages:prepend () {
> > cv_libdir = d.expand('${libdir}')
> > do_split_packages(d, cv_libdir, '^lib(.*)\.so$', 'lib%s-dev',
> > 'OpenCV %s development package', extra_depends='${PN}-dev',
> > allow_links=True)
> > do_split_packages(d, cv_libdir, '^lib(.*)\.la$', 'lib%s-dev',
> > 'OpenCV %s development package', extra_depends='${PN}-dev')
> > @@ -211,14 +211,14 @@ RDEPENDS_python3-opencv = "python3-core
> > python3-numpy"
> >
> > RDEPENDS_${PN}-apps = "bash"
> >
> > -do_compile_prepend() {
> > +do_compile:prepend() {
> > # remove the build host info to improve reproducibility
> > if [ -f ${WORKDIR}/build/modules/core/version_string.inc ]; then
> > sed -i "s#${WORKDIR}#/workdir#g"
> > ${WORKDIR}/build/modules/core/version_string.inc
> > fi
> > }
> >
> > -do_install_append() {
> > +do_install:append() {
> > # Move Python files into correct library folder (for multilib
> > build)
> > if [ "$libdir" != "/usr/lib" -a -d ${D}/usr/lib ]; then
> > mv ${D}/usr/lib/* ${D}/${libdir}/
> > @@ -245,7 +245,7 @@ LIC_FILES_CHKSUM = "
> > file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
> > SRCREV_opencv = "5423d53ae0d116ee5bbe52f8b5503f0cd8586998"
> > OPENCV_SRC ?= "git://source.codeaurora.org/external/imx/opencv-
> > imx.git;protocol=https"
> > SRCBRANCH = "4.5.2_imx"
> > -SRC_URI_remove = "git://github.com/opencv/opencv.git;name=opencv"
> > +SRC_URI:remove = "git://github.com/opencv/opencv.git;name=opencv"
> > SRC_URI =+ "${OPENCV_SRC};branch=${SRCBRANCH};name=opencv"
> >
> > # Add opencv_extra
> > @@ -254,7 +254,7 @@ SRC_URI += " \
> >
> > git://github.com/opencv/opencv_extra.git;destsuffix=extra;name=extra
> > \
> >
> > file://0001-Add-smaller-version-of-download_models.py.patch;patchdir=../extra
> > \
> > "
> > -SRCREV_FORMAT_append = "_extra"
> > +SRCREV_FORMAT:append = "_extra"
> >
> > # Add tiny-dnn
> > SRC_URI[tinydnn.md5sum] = "adb1c512e09ca2c7a6faef36f9c53e59"
> > @@ -264,25 +264,25 @@ SRC_URI += " \
> > file://OpenCV_DNN_examples.patch \
> > "
> >
> > -PACKAGECONFIG_remove = "eigen"
> > -PACKAGECONFIG_append_mx8 = " dnn text"
> > +PACKAGECONFIG:remove = "eigen"
> > +PACKAGECONFIG:append:mx8 = " dnn text"
> > PACKAGECONFIG_OPENCL = ""
> > -PACKAGECONFIG_OPENCL_mx8 = "opencl"
> > -PACKAGECONFIG_OPENCL_mx8dxl = ""
> > -PACKAGECONFIG_OPENCL_mx8mm = ""
> > -PACKAGECONFIG_OPENCL_mx8mnlite = ""
> > -PACKAGECONFIG_append = " ${PACKAGECONFIG_OPENCL}"
> > +PACKAGECONFIG_OPENCL:mx8 = "opencl"
> > +PACKAGECONFIG_OPENCL:mx8dxl = ""
> > +PACKAGECONFIG_OPENCL:mx8mm = ""
> > +PACKAGECONFIG_OPENCL:mx8mnlite = ""
> > +PACKAGECONFIG:append = " ${PACKAGECONFIG_OPENCL}"
> >
> > PACKAGECONFIG[openvx] = "-DWITH_OPENVX=ON -
> > DOPENVX_ROOT=${STAGING_LIBDIR} -
> > DOPENVX_LIB_CANDIDATES='OpenVX;OpenVXU',-
> > DWITH_OPENVX=OFF,virtual/libopenvx,"
> > PACKAGECONFIG[qt5] = "-DWITH_QT=ON -
> > DOE_QMAKE_PATH_EXTERNAL_HOST_BINS=${STAGING_BINDIR_NATIVE} -
> > DCMAKE_PREFIX_PATH=${STAGING_BINDIR_NATIVE}/cmake,-
> > DWITH_QT=OFF,qtbase qtbase-native,"
> > PACKAGECONFIG[tests-imx] = "-DINSTALL_TESTS=ON -
> > DOPENCV_TEST_DATA_PATH=${S}/../extra/testdata, -DINSTALL_TESTS=OFF,"
> >
> > -do_unpack_extra_append() {
> > +do_unpack_extra:append() {
> > mkdir -p ${S}/3rdparty/tinydnn/
> > tar xzf ${WORKDIR}/v1.0.0a3.tar.gz -C ${S}/3rdparty/tinydnn/
> > }
> >
> > -do_install_append() {
> > +do_install:append() {
> > ln -sf opencv4/opencv2 ${D}${includedir}/opencv2
> > install -d ${D}${datadir}/OpenCV/samples/data
> > cp -r ${S}/samples/data/* ${D}${datadir}/OpenCV/samples/data
> > --
> > 2.31.1
> >
> >
> >
> >
>
>
>
>
>
--
Thomas Perrot, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 673 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [meta-freescale] [PATCH] meta-freescale: convert to new override syntax in honister
2021-08-10 16:03 ` Thomas Perrot
@ 2021-08-10 18:55 ` Otavio Salvador
0 siblings, 0 replies; 4+ messages in thread
From: Otavio Salvador @ 2021-08-10 18:55 UTC (permalink / raw)
To: Thomas Perrot; +Cc: meta-freescale
Em ter., 10 de ago. de 2021 às 13:03, Thomas Perrot
<thomas.perrot@bootlin.com> escreveu:
> On Sat, 2021-08-07 at 08:33 -0300, Otavio Salvador wrote:
> > We have an onging PR for it; please try it out.
> >
>
> Thanks, I didn't know I had to do PR on github for this layer.
>
> Do you need help speeding up the PR merge regarding the new syntax?
We need help testing.
>
> Best regards,
> Thomas
>
> > Em sáb., 7 de ago. de 2021 às 04:09, Thomas Perrot
> > <thomas.perrot@bootlin.com> escreveu:
> > >
> > > Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
> > > ---
> > > classes/fsl-eula-unpack.bbclass | 4 +-
> > > classes/fsl-u-boot-localversion.bbclass | 2 +-
> > > .../fsl-vivante-kernel-driver-handler.bbclass | 2 +-
> > > classes/image_types_fsl.bbclass | 2 +-
> > > classes/imx-boot-container.bbclass | 4 +-
> > > classes/kernel-imximage.bbclass | 4 +-
> > > classes/kernel-itbimage.bbclass | 2 +-
> > > classes/mfgtool-initramfs-image.bbclass | 2 +-
> > > classes/qoriq_build_64bit_kernel.bbclass | 4 +-
> > > classes/use-imx-headers.bbclass | 6 +-
> > > ...e-imx-security-controller-firmware.bbclass | 6 +-
> > > conf/layer.conf | 2 +-
> > > conf/machine/imx6qdlsabreauto.conf | 18 +-
> > > conf/machine/imx6qdlsabresd.conf | 18 +-
> > > conf/machine/imx6slevk.conf | 2 +-
> > > conf/machine/imx6sllevk.conf | 2 +-
> > > conf/machine/imx6sxsabreauto.conf | 4 +-
> > > conf/machine/imx6sxsabresd.conf | 4 +-
> > > conf/machine/imx6ulevk.conf | 12 +-
> > > conf/machine/imx6ullevk.conf | 2 +-
> > > conf/machine/imx6ulz-14x14-evk.conf | 2 +-
> > > conf/machine/imx7dsabresd.conf | 2 +-
> > > conf/machine/imx7ulpevk.conf | 4 +-
> > > conf/machine/imx8dxl-lpddr4-evk.conf | 2 +-
> > > conf/machine/imx8mm-ddr4-evk.conf | 2 +-
> > > conf/machine/imx8mm-lpddr4-evk.conf | 2 +-
> > > conf/machine/imx8mn-ddr4-evk.conf | 2 +-
> > > conf/machine/imx8mn-lpddr4-evk.conf | 2 +-
> > > conf/machine/imx8mp-ddr4-evk.conf | 2 +-
> > > conf/machine/imx8mp-lpddr4-evk.conf | 2 +-
> > > conf/machine/imx8mq-evk.conf | 12 +-
> > > conf/machine/imx8qm-mek.conf | 8 +-
> > > conf/machine/imx8qxp-mek.conf | 2 +-
> > > conf/machine/include/imx-base.inc | 360 +++++++++-------
> > > --
> > > conf/machine/include/imx8dxl-evk.inc | 4 +-
> > > conf/machine/include/imx8mm-evk.inc | 26 +-
> > > conf/machine/include/imx8mn-evk.inc | 26 +-
> > > conf/machine/include/imx8mp-evk.inc | 24 +-
> > > conf/machine/include/imx8x-mek.inc | 6 +-
> > > conf/machine/include/qoriq-base.inc | 8 +-
> > > conf/machine/include/utilities.inc | 2 +-
> > > conf/machine/ls1028ardb.conf | 2 +-
> > > conf/machine/ls1043ardb.conf | 2 +-
> > > conf/machine/ls1046afrwy.conf | 2 +-
> > > conf/machine/ls1046ardb.conf | 2 +-
> > > .../wayland/weston-init.bbappend | 2 +-
> > > .../recipes-browser/chromium/chromium-imx.inc | 4 +-
> > > .../clutter/clutter-1.0_%.bbappend | 2 +-
> > > .../recipes-graphics/cogl/cogl-1.0_%.bbappend | 2 +-
> > > .../wayland/weston-init.bbappend | 2 +-
> > > .../glmark2/glmark2_%.bbappend | 8 +-
> > > .../recipes-devtools/luajit/luajit_%.bbappend | 4 +-
> > > .../recipes-dpaa/fmc/fmc_git.bb | 18 +-
> > > .../xserver-common/xserver-common_%.bbappend | 6 +-
> > > .../recipes-qt4/qt4/qt4-imx-support.inc | 12 +-
> > > .../recipes-qt/qt5/qtbase_%.bbappend | 26 +-
> > > .../recipes-qt/qt5/qtwayland_%.bbappend | 8 +-
> > > .../libvirt/libvirt_%.bbappend | 6 +-
> > > recipes-bsp/alsa-state/alsa-state.bbappend | 16 +-
> > > recipes-bsp/atf/qoriq-atf_1.5.bb | 18 +-
> > > recipes-bsp/atf/qoriq-atf_2.3.bb | 2 +-
> > > .../firmware-imx/firmware-imx-8_8.12.bb | 4 +-
> > > recipes-bsp/firmware-imx/firmware-imx_8.12.bb | 2 +-
> > > recipes-bsp/firmware-qca/qca-tools_3.0.2.bb | 4 +-
> > > recipes-bsp/formfactor/formfactor_%.bbappend | 2 +-
> > > recipes-bsp/imx-atf/imx-atf_2.4.bb | 2 +-
> > > recipes-bsp/imx-lib/imx-lib_git.bb | 18 +-
> > > recipes-bsp/imx-mkimage/imx-boot_1.0.bb | 32 +-
> > > recipes-bsp/imx-mkimage/imx-mkimage_git.bb | 6 +-
> > > .../imx-sc-firmware/imx-sc-firmware_1.9.0.bb | 8 +-
> > > recipes-bsp/imx-test/imx-test_git.bb | 28 +-
> > > .../imx-vpu-hantro-daemon_1.0.0.bb | 8 +-
> > > .../imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb | 6 +-
> > > recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb | 2 +-
> > > .../libimxdmabuffer/libimxdmabuffer_1.0.1.bb | 14 +-
> > > recipes-bsp/mc-utils/mc-utils_git.bb | 10 +-
> > > recipes-bsp/rcw/rcw_git.bb | 6 +-
> > > recipes-bsp/u-boot/libubootenv_%.bbappend | 4 +-
> > > .../u-boot/u-boot-fslc-mfgtool_2021.07.bb | 2 +-
> > > recipes-bsp/u-boot/u-boot-fslc_2021.07.bb | 4 +-
> > > .../u-boot/u-boot-imx-mfgtool_2021.04.bb | 2 +-
> > > recipes-bsp/u-boot/u-boot-imx_2021.04.bb | 2 +-
> > > recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb | 18 +-
> > > .../iproute2/iproute2_%.bbappend | 2 +-
> > > .../openssl/openssl_%.bbappend | 6 +-
> > > .../init-ifupdown/init-ifupdown_%.bbappend | 2 +-
> > > recipes-core/udev/udev-rules-qoriq.bb | 6 +-
> > > recipes-devtools/qemu/qemu-qoriq_4.1.0.bb | 8 +-
> > > recipes-devtools/qemu/qemu.inc | 12 +-
> > > recipes-dpaa/fm-ucode/fm-ucode_git.bb | 14 +-
> > > recipes-dpaa2/aiopsl/aiopsl_git.bb | 4 +-
> > > .../management-complex_10.14.1.bb | 8 +-
> > > .../management-complex_10.20.4.bb | 8 +-
> > > .../management-complex_10.24.0.bb | 10 +-
> > > recipes-extended/dpdk/dpdk.inc | 18 +-
> > > recipes-extended/dpdk/dpdk_19.11-20.12.bb | 2 +-
> > > recipes-extended/jailhouse/jailhouse_0.12.bb | 6 +-
> > > recipes-extended/odp/odp-counters_git.bb | 2 +-
> > > recipes-extended/odp/odp-module_git.bb | 2 +-
> > > recipes-extended/odp/odp.inc | 2 +-
> > > recipes-extended/odp/odp_git.bb | 18 +-
> > > recipes-extended/procps/procps_%.bbappend | 2 +-
> > > recipes-extended/testfloat/testfloat_2a.bb | 2 +-
> > > recipes-extended/tsntool/tsntool_git.bb | 2 +-
> > > .../packagegroups/packagegroup-fsl-isp.bb | 2 +-
> > > .../packagegroups/packagegroup-fsl-qca6174.bb | 2 +-
> > > .../packagegroups/packagegroup-fsl-qca9377.bb | 2 +-
> > > recipes-graphics/cairo/cairo_%.bbappend | 4 +-
> > > recipes-graphics/drm/libdrm_2.4.102.imx.bb | 6 +-
> > > recipes-graphics/gtk+/gtk+3_%.bbappend | 4 +-
> > > .../images/core-image-weston.bbappend | 2 +-
> > > .../imx-gpu-apitrace_9.0.0.bb | 8 +-
> > > .../imx-gpu-viv/imx-gpu-viv-6.inc | 44 +--
> > > .../libepoxy/libepoxy_1.5.%.bbappend | 2 +-
> > > recipes-graphics/libsdl2/libsdl2_%.bbappend | 4 +-
> > > recipes-graphics/mesa/mesa-demos_%.bbappend | 16 +-
> > > recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb | 2 +-
> > > recipes-graphics/mesa/mesa-gl_%.bbappend | 2 +-
> > > recipes-graphics/mesa/mesa_%.bbappend | 22 +-
> > > .../vulkan/vulkan-loader_%.bbappend | 2 +-
> > > recipes-graphics/waffle/waffle_%.bbappend | 10 +-
> > > recipes-graphics/wayland/weston-init.bbappend | 26 +-
> > > recipes-graphics/wayland/weston_9.0.0.imx.bb | 26 +-
> > > .../pointercal-xinput_%.bbappend | 2 +-
> > > .../xf86-video-imx-vivante_6.4.0.p0.0.bb | 2 +-
> > > .../xserver-xf86-config_%.bbappend | 2 +-
> > > .../xorg-xserver/xserver-xorg_%.bbappend | 14 +-
> > > recipes-graphics/xwayland/xwayland_%.bbappend | 6 +-
> > > recipes-kernel/ceetm/ceetm_git.bb | 2 +-
> > > .../kernel-modules/kernel-module-ar_git.bb | 2 +-
> > > .../kernel-modules/kernel-module-ipc.inc | 2 +-
> > > .../kernel-module-qcacld-lea.inc | 2 +-
> > > .../linux/linux-fslc-lts-mfgtool_5.10.bb | 2 +-
> > > .../linux/linux-fslc-mfgtool_5.12.bb | 2 +-
> > > .../linux/linux-imx-headers_5.10.bb | 2 +-
> > > .../linux/linux-imx-mfgtool_5.10.bb | 2 +-
> > > recipes-kernel/linux/linux-qoriq.inc | 16 +-
> > > recipes-multimedia/alsa/alsa-lib_%.bbappend | 6 +-
> > > .../gstreamer/gstreamer1.0-libav_1.16.0.bb | 8 +-
> > > .../gstreamer1.0-plugins-bad_1.16.3.imx.bb | 16 +-
> > > .../gstreamer1.0-plugins-base_1.16.%.bbappend | 6 +-
> > > .../gstreamer1.0-plugins-base_1.16.2.imx.bb | 2 +-
> > > .../gstreamer1.0-plugins-good_1.16.%.bbappend | 6 +-
> > > .../gstreamer1.0-plugins-imx_2.0.0.bb | 16 +-
> > > .../gstreamer/imx-gst1.0-plugin_4.5.7.bb | 24 +-
> > > .../imx-codec/imx-codec_4.5.7.bb | 6 +-
> > > .../imx-vpuwrap/imx-vpuwrap_4.5.7.bb | 4 +-
> > > .../libimxvpuapi/libimxvpuapi2_2.2.0.bb | 8 +-
> > > .../pulseaudio/pulseaudio_%.bbappend | 18 +-
> > > .../optee-imx/optee-client_3.10.0.imx.bb | 4 +-
> > > .../optee-imx/optee-os_3.10.0.imx.bb | 30 +-
> > > .../optee-imx/optee-test_3.10.0.imx.bb | 6 +-
> > > .../optee/optee-os-qoriq_3.8.0.bb | 12 +-
> > > .../0001-Use-Os-to-compile-tinyxml2.cpp.patch | 6 +-
> > > recipes-support/opencv/opencv_4.5.2.imx.bb | 36 +-
> > > 155 files changed, 762 insertions(+), 762 deletions(-)
> > >
> > > diff --git a/classes/fsl-eula-unpack.bbclass b/classes/fsl-eula-
> > > unpack.bbclass
> > > index 498d7826d9cf..5690898c5a43 100644
> > > --- a/classes/fsl-eula-unpack.bbclass
> > > +++ b/classes/fsl-eula-unpack.bbclass
> > > @@ -79,11 +79,11 @@ FSL_EULA_FILE_MD5SUM ?= \
> > >
> > > LIC_FILES_CHKSUM_LAYER ?=
> > > "file://${FSL_EULA_FILE};md5=${FSL_EULA_FILE_MD5SUM}"
> > > LIC_FILES_CHKSUM_LAYER[vardepsexclude] += "FSL_EULA_FILE"
> > > -LIC_FILES_CHKSUM_append = " ${LIC_FILES_CHKSUM_LAYER}"
> > > +LIC_FILES_CHKSUM:append = " ${LIC_FILES_CHKSUM_LAYER}"
> > >
> > > LIC_FILES_CHKSUM[vardepsexclude] += "FSL_EULA_FILE"
> > >
> > > -do_fetch_prepend() {
> > > +do_fetch:prepend() {
> > > if "Proprietary" not in d.getVar("LICENSE"):
> > > bb.fatal("The recipe LICENSE should include Proprietary but
> > > is " + d.getVar("LICENSE") + ".")
> > > }
> > > diff --git a/classes/fsl-u-boot-localversion.bbclass b/classes/fsl-u-
> > > boot-localversion.bbclass
> > > index 617aae1de215..ebde8ea718f2 100644
> > > --- a/classes/fsl-u-boot-localversion.bbclass
> > > +++ b/classes/fsl-u-boot-localversion.bbclass
> > > @@ -14,7 +14,7 @@ LOCALVERSION ??= "+fslc"
> > >
> > > UBOOT_LOCALVERSION = "${LOCALVERSION}"
> > >
> > > -do_compile_prepend() {
> > > +do_compile:prepend() {
> > > if [ "${SCMVERSION}" = "y" ]; then
> > > # Add GIT revision to the local version
> > > head=`cd ${S} ; git rev-parse --verify --short HEAD
> > > 2> /dev/null`
> > > diff --git a/classes/fsl-vivante-kernel-driver-handler.bbclass
> > > b/classes/fsl-vivante-kernel-driver-handler.bbclass
> > > index 8ac8a33445d2..7ba597f1963e 100644
> > > --- a/classes/fsl-vivante-kernel-driver-handler.bbclass
> > > +++ b/classes/fsl-vivante-kernel-driver-handler.bbclass
> > > @@ -49,7 +49,7 @@ python fsl_vivante_kernel_driver_handler () {
> > > addhandler fsl_vivante_kernel_driver_handler
> > > fsl_vivante_kernel_driver_handler[eventmask] =
> > > "bb.event.RecipePreFinalise"
> > >
> > > -do_configure_append () {
> > > +do_configure:append () {
> > > if [ "${MACHINE_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT}" = "1" ];
> > > then
> > > config="${B}/.config"
> > >
> > > diff --git a/classes/image_types_fsl.bbclass
> > > b/classes/image_types_fsl.bbclass
> > > index c49c51b7a348..d6d8da95fd3b 100644
> > > --- a/classes/image_types_fsl.bbclass
> > > +++ b/classes/image_types_fsl.bbclass
> > > @@ -37,7 +37,7 @@ do_image_wic[depends] += " \
> > > "
> > >
> > > # We need to apply a fixup inside of the partition table
> > > -IMAGE_CMD_wic_append_mxs() {
> > > +IMAGE_CMD_wic:append:mxs() {
> > > # Change partition type for mxs processor family
> > > bbnote "Setting partition type to 0x53 as required for mxs'
> > > SoC family."
> > > echo -n S | dd of=$out${IMAGE_NAME_SUFFIX}.wic bs=1 count=1
> > > seek=450 conv=notrunc
> > > diff --git a/classes/imx-boot-container.bbclass b/classes/imx-boot-
> > > container.bbclass
> > > index 41fe9cca739a..33de45c52b28 100644
> > > --- a/classes/imx-boot-container.bbclass
> > > +++ b/classes/imx-boot-container.bbclass
> > > @@ -23,7 +23,7 @@
> > >
> > > # Define ATF binary file to be deployed to the U-Boot build folder
> > > ATF_MACHINE_NAME = "bl31-${ATF_PLATFORM}.bin"
> > > -ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES',
> > > 'optee', '-optee', '', d)}"
> > > +ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES',
> > > 'optee', '-optee', '', d)}"
> > >
> > > # This package aggregates output deployed by other packages, so set
> > > the
> > > # appropriate dependencies for populate binaries task
> > > @@ -76,7 +76,7 @@ addtask do_resolve_and_populate_binaries before
> > > do_compile after do_configure
> > > # This effectively would allow the usage of the same WKS file for
> > > those
> > > # derivatives that are using the boot container from U-Boot and
> > > those
> > > # that are not yet have support for it enabled.
> > > -do_deploy_append() {
> > > +do_deploy:append() {
> > > # Deploy the resulted flash.bin for WIC to pick it up
> > > if [ -n "${UBOOT_CONFIG}" ]; then
> > > for config in ${UBOOT_MACHINE}; do
> > > diff --git a/classes/kernel-imximage.bbclass b/classes/kernel-
> > > imximage.bbclass
> > > index 234cc00d3059..ccf7ec53bf45 100644
> > > --- a/classes/kernel-imximage.bbclass
> > > +++ b/classes/kernel-imximage.bbclass
> > > @@ -17,7 +17,7 @@
> > > #
> > > # Copyright 2017 (C) O.S. Systems Software LTDA.
> > >
> > > -DEPENDS_append = ' u-boot-mkimage-native'
> > > +DEPENDS:append = ' u-boot-mkimage-native'
> > >
> > > IMXIMAGE_ENTRYPOINT ?= "${UBOOT_ENTRYPOINT}"
> > >
> > > @@ -55,6 +55,6 @@ gen_imximage() {
> > > done
> > > }
> > >
> > > -do_deploy_append() {
> > > +do_deploy:append() {
> > > gen_imximage
> > > }
> > > diff --git a/classes/kernel-itbimage.bbclass b/classes/kernel-
> > > itbimage.bbclass
> > > index 84262879c09b..51a87319ce94 100644
> > > --- a/classes/kernel-itbimage.bbclass
> > > +++ b/classes/kernel-itbimage.bbclass
> > > @@ -459,7 +459,7 @@ addtask assemble_fitimage_initramfs before
> > > do_deploy after do_install
> > >
> > >
> > > kernel_do_deploy[vardepsexclude] = "DATETIME"
> > > -kernel_do_deploy_append() {
> > > +kernel_do_deploy:append() {
> > > # Update deploy directory
> > > if echo ${KERNEL_IMAGETYPES} | grep -wq "itbImage"; then
> > > cd ${B}
> > > diff --git a/classes/mfgtool-initramfs-image.bbclass
> > > b/classes/mfgtool-initramfs-image.bbclass
> > > index 65028b8faa88..1d4c55131d67 100644
> > > --- a/classes/mfgtool-initramfs-image.bbclass
> > > +++ b/classes/mfgtool-initramfs-image.bbclass
> > > @@ -13,7 +13,7 @@ FEATURE_PACKAGES_extfs = "packagegroup-fsl-mfgtool-
> > > extfs"
> > > FEATURE_PACKAGES_f2fs = "packagegroup-fsl-mfgtool-f2fs"
> > >
> > > IMAGE_FSTYPES = "cpio.gz.u-boot"
> > > -IMAGE_FSTYPES_mxs = "cpio.gz.u-boot"
> > > +IMAGE_FSTYPES:mxs = "cpio.gz.u-boot"
> > > IMAGE_ROOTFS_SIZE ?= "8192"
> > >
> > > # Filesystems enabled by default
> > > diff --git a/classes/qoriq_build_64bit_kernel.bbclass
> > > b/classes/qoriq_build_64bit_kernel.bbclass
> > > index 93b4d412ff3c..7014be91cc1f 100644
> > > --- a/classes/qoriq_build_64bit_kernel.bbclass
> > > +++ b/classes/qoriq_build_64bit_kernel.bbclass
> > > @@ -6,8 +6,8 @@ python () {
> > > if promote_kernel == "1":
> > > sys_multilib = 'powerpc64' + d.getVar('TARGET_VENDOR',
> > > False) + 'mllib64-' + d.getVar('HOST_OS', False)
> > > tc_options = d.getVar('TOOLCHAIN_OPTIONS', False) +
> > > '/../lib64-' + d.getVar("MACHINE", False)
> > > - d.setVar('DEPENDS_append', ' lib64-gcc-cross-powerpc64
> > > lib64-libgcc')
> > > - d.setVar('PATH_append', ':' +
> > > d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
> > > + d.setVar('DEPENDS:append', ' lib64-gcc-cross-powerpc64
> > > lib64-libgcc')
> > > + d.setVar('PATH:append', ':' +
> > > d.getVar('STAGING_BINDIR_NATIVE', False) + '/' + sys_multilib)
> > > d.setVar('KERNEL_CC', d.getVar('CCACHE', False) +
> > > sys_multilib + '-' + 'gcc' + d.getVar('HOST_CC_KERNEL_ARCH', False) +
> > > tc_options)
> > > d.setVar('KERNEL_LD', d.getVar('CCACHE', False) +
> > > sys_multilib + '-' + 'ld.bfd' + d.getVar('HOST_LD_KERNEL_ARCH',
> > > False) + tc_options)
> > > d.setVar('KERNEL_AR', d.getVar('CCACHE', False) +
> > > sys_multilib + '-' + 'ar' + d.getVar('HOST_AR_KERNEL_ARCH', False))
> > > diff --git a/classes/use-imx-headers.bbclass b/classes/use-imx-
> > > headers.bbclass
> > > index fcec68c8b3e0..b03d37413504 100644
> > > --- a/classes/use-imx-headers.bbclass
> > > +++ b/classes/use-imx-headers.bbclass
> > > @@ -13,14 +13,14 @@
> > > #
> > > # Copyright 2018 (C) O.S. Systems Software LTDA.
> > >
> > > -DEPENDS_append_imx = " linux-imx-headers"
> > > +DEPENDS:append:imx = " linux-imx-headers"
> > >
> > > # Set runtime dependency of -dev for package inheriting this class
> > > to
> > > # linux-imx-headers-dev package. This is required in order to
> > > propagate
> > > # headers into the SDK
> > > RDEPENDS_${PN}-dev += "linux-imx-headers-dev"
> > >
> > > -PACKAGE_ARCH_imx ?= "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:imx ?= "${MACHINE_SOCARCH}"
> > >
> > > STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
> > >
> > > @@ -34,4 +34,4 @@ STAGING_INCDIR_IMX = "${STAGING_INCDIR}/imx"
> > > # Typical example here would be imx-vpu-hantro recipe, which
> > > requires NXP
> > > # BSP and is not compatible with mainline.
> > > COMPATIBLE_HOST = '(null)'
> > > -COMPATIBLE_HOST_use-nxp-bsp = '.*'
> > > +COMPATIBLE_HOST:use-nxp-bsp = '.*'
> > > diff --git a/classes/use-imx-security-controller-firmware.bbclass
> > > b/classes/use-imx-security-controller-firmware.bbclass
> > > index 7c79fc62bbd5..9650059b5066 100644
> > > --- a/classes/use-imx-security-controller-firmware.bbclass
> > > +++ b/classes/use-imx-security-controller-firmware.bbclass
> > > @@ -18,11 +18,11 @@
> > >
> > > SECO_FIRMWARE_NAME ?= ""
> > >
> > > -SECO_FIRMWARE_NAME_mx8qm = "mx8qmb0-ahab-container.img"
> > > -SECO_FIRMWARE_NAME_mx8qxp = \
> > > +SECO_FIRMWARE_NAME:mx8qm = "mx8qmb0-ahab-container.img"
> > > +SECO_FIRMWARE_NAME:mx8qxp = \
> > > "${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', 'mx8qxb0-
> > > ahab-container.img', \
> > > 'mx8qxc0-
> > > ahab-container.img', d)}"
> > > -SECO_FIRMWARE_NAME_mx8dxl = "mx8dxla1-ahab-container.img"
> > > +SECO_FIRMWARE_NAME:mx8dxl = "mx8dxla1-ahab-container.img"
> > >
> > > python () {
> > > if "mx8m" in d.getVar('MACHINEOVERRIDES').split(":"):
> > > diff --git a/conf/layer.conf b/conf/layer.conf
> > > index e07b65ab77f4..4487de9cc445 100644
> > > --- a/conf/layer.conf
> > > +++ b/conf/layer.conf
> > > @@ -8,7 +8,7 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
> > > BBFILE_COLLECTIONS += "freescale-layer"
> > > BBFILE_PATTERN_freescale-layer := "^${LAYERDIR}/"
> > > BBFILE_PRIORITY_freescale-layer = "5"
> > > -LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott"
> > > +LAYERSERIES_COMPAT_freescale-layer = "gatesgarth hardknott honister"
> > >
> > > # Add the Freescale-specific licenses into the metadata
> > > LICENSE_PATH += "${LAYERDIR}/custom-licenses"
> > > diff --git a/conf/machine/imx6qdlsabreauto.conf
> > > b/conf/machine/imx6qdlsabreauto.conf
> > > index b7aec8c257ee..0b5274cb8149 100644
> > > --- a/conf/machine/imx6qdlsabreauto.conf
> > > +++ b/conf/machine/imx6qdlsabreauto.conf
> > > @@ -26,7 +26,7 @@ KERNEL_DEVICETREE = " \
> > > imx6dl-sabreauto.dtb imx6dl-sabreauto-gpmi-weim.dtb imx6dl-
> > > sabreauto-ecspi.dtb \
> > > imx6dl-sabreauto-flexcan1.dtb imx6dl-sabreauto-enetirq.dtb \
> > > "
> > > -KERNEL_DEVICETREE_use-mainline-bsp = " \
> > > +KERNEL_DEVICETREE:use-mainline-bsp = " \
> > > imx6qp-sabreauto.dtb \
> > > imx6q-sabreauto.dtb \
> > > imx6dl-sabreauto.dtb \
> > > @@ -34,18 +34,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
> > >
> > > ### u-boot-fslc settings ###
> > >
> > > -SPL_BINARY_pn-u-boot-fslc = "SPL"
> > > -UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
> > > -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > > +SPL_BINARY:pn-u-boot-fslc = "SPL"
> > > +UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabreauto_defconfig"
> > > +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> > >
> > > ### u-boot-imx settings ###
> > >
> > > # The u-boot-imx does not provide unified functionality for DL/Q/QP
> > > SoC
> > > # variants. Change the defconfig to the targeted SoC variant.
> > > -SPL_BINARY_pn-u-boot-imx = ""
> > > -UBOOT_MACHINE_pn-u-boot-imx = "mx6qsabreauto_defconfig"
> > > -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> > > -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > > +SPL_BINARY:pn-u-boot-imx = ""
> > > +UBOOT_MACHINE:pn-u-boot-imx = "mx6qsabreauto_defconfig"
> > > +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> > > +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> > >
> > > WKS_FILE = " \
> > > ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> > > @@ -54,6 +54,6 @@ WKS_FILE = " \
> > >
> > > SERIAL_CONSOLES = "115200;ttymxc3"
> > >
> > > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> > >
> > > MACHINE_FEATURES += " pci wifi bluetooth"
> > > diff --git a/conf/machine/imx6qdlsabresd.conf
> > > b/conf/machine/imx6qdlsabresd.conf
> > > index b3d09e9397cb..27a2e9d7fa7f 100644
> > > --- a/conf/machine/imx6qdlsabresd.conf
> > > +++ b/conf/machine/imx6qdlsabresd.conf
> > > @@ -35,7 +35,7 @@ KERNEL_DEVICETREE = " \
> > > imx6dl-sabresd-hdcp.dtb \
> > > imx6dl-sabresd-ldo.dtb \
> > > "
> > > -KERNEL_DEVICETREE_use-mainline-bsp = " \
> > > +KERNEL_DEVICETREE:use-mainline-bsp = " \
> > > imx6qp-sabresd.dtb \
> > > imx6q-sabresd.dtb \
> > > imx6dl-sabresd.dtb \
> > > @@ -43,18 +43,18 @@ KERNEL_DEVICETREE_use-mainline-bsp = " \
> > >
> > > ### u-boot-fslc settings ###
> > >
> > > -SPL_BINARY_pn-u-boot-fslc = "SPL"
> > > -UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > > -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > > +SPL_BINARY:pn-u-boot-fslc = "SPL"
> > > +UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > > +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> > >
> > > ### u-boot-imx settings ###
> > >
> > > # The u-boot-imx does not provide unified functionality for DL/Q/QP
> > > SoC
> > > # variants. Change the defconfig to the targeted SoC variant.
> > > -SPL_BINARY_pn-u-boot-imx = ""
> > > -UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > > -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> > > -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > > +SPL_BINARY:pn-u-boot-imx = ""
> > > +UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > > +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> > > +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> > >
> > > WKS_FILE = " \
> > > ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> > > @@ -63,6 +63,6 @@ WKS_FILE = " \
> > >
> > > SERIAL_CONSOLES = "115200;ttymxc0"
> > >
> > > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> > >
> > > MACHINE_FEATURES += " pci wifi bluetooth"
> > > diff --git a/conf/machine/imx6slevk.conf
> > > b/conf/machine/imx6slevk.conf
> > > index 1e8c403b7cde..8bef21b680b4 100644
> > > --- a/conf/machine/imx6slevk.conf
> > > +++ b/conf/machine/imx6slevk.conf
> > > @@ -10,7 +10,7 @@ include conf/machine/include/imx-base.inc
> > > include conf/machine/include/tune-cortexa9.inc
> > >
> > > KERNEL_DEVICETREE = "imx6sl-evk.dtb"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > imx6sl-evk-btwifi.dtb \
> > > imx6sl-evk-csi.dtb \
> > > imx6sl-evk-ldo.dtb \
> > > diff --git a/conf/machine/imx6sllevk.conf
> > > b/conf/machine/imx6sllevk.conf
> > > index 30b537f18666..6282533aa4f1 100644
> > > --- a/conf/machine/imx6sllevk.conf
> > > +++ b/conf/machine/imx6sllevk.conf
> > > @@ -23,7 +23,7 @@ UBOOT_CONFIG[sd-optee] =
> > > "mx6sllevk_optee_config,sdcard"
> > > UBOOT_CONFIG[epdc] = "mx6sllevk_epdc_config"
> > > UBOOT_CONFIG[mfgtool] = "mx6sllevk_config"
> > >
> > > -OPTEE_BIN_EXT_imx6sllevk = "6sllevk"
> > > +OPTEE_BIN_EXT:imx6sllevk = "6sllevk"
> > >
> > > SERIAL_CONSOLES = "115200;ttymxc0"
> > >
> > > diff --git a/conf/machine/imx6sxsabreauto.conf
> > > b/conf/machine/imx6sxsabreauto.conf
> > > index f7031ccb1134..2354635e2b33 100644
> > > --- a/conf/machine/imx6sxsabreauto.conf
> > > +++ b/conf/machine/imx6sxsabreauto.conf
> > > @@ -10,7 +10,7 @@ require conf/machine/include/imx-base.inc
> > > require conf/machine/include/tune-cortexa9.inc
> > >
> > > KERNEL_DEVICETREE = "imx6sx-sabreauto.dtb"
> > > -KERNEL_DEVICETREE_use-mainline-bsp = "imx6sx-sabreauto.dtb"
> > > +KERNEL_DEVICETREE:use-mainline-bsp = "imx6sx-sabreauto.dtb"
> > >
> > > UBOOT_MAKE_TARGET = "u-boot.imx"
> > > UBOOT_SUFFIX = "imx"
> > > @@ -29,6 +29,6 @@ OPTEE_BIN_EXT = "6sxauto"
> > >
> > > SERIAL_CONSOLES = "115200;ttymxc3"
> > >
> > > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> > >
> > > MACHINE_FEATURES += " pci wifi bluetooth"
> > > diff --git a/conf/machine/imx6sxsabresd.conf
> > > b/conf/machine/imx6sxsabresd.conf
> > > index ff7d6ae62d03..fcfcbd5f41c7 100644
> > > --- a/conf/machine/imx6sxsabresd.conf
> > > +++ b/conf/machine/imx6sxsabresd.conf
> > > @@ -14,7 +14,7 @@ KERNEL_DEVICETREE = " \
> > > imx6sx-sdb-reva.dtb \
> > > imx6sx-sdb-sai.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > imx6sx-sdb-btwifi.dtb \
> > > imx6sx-sdb-emmc.dtb \
> > > imx6sx-sdb-lcdif1.dtb \
> > > @@ -43,6 +43,6 @@ OPTEE_BIN_EXT = "6sxsdb"
> > >
> > > SERIAL_CONSOLES = "115200;ttymxc0"
> > >
> > > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-ath6k"
> > > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-ath6k"
> > >
> > > MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
> > > diff --git a/conf/machine/imx6ulevk.conf
> > > b/conf/machine/imx6ulevk.conf
> > > index f7c5d8ae52df..6fd14456fb29 100644
> > > --- a/conf/machine/imx6ulevk.conf
> > > +++ b/conf/machine/imx6ulevk.conf
> > > @@ -21,19 +21,19 @@ KERNEL_DEVICETREE = " \
> > > imx6ul-14x14-evk-emmc.dtb \
> > > imx6ul-14x14-evk-gpmi-weim.dtb \
> > > "
> > > -KERNEL_DEVICETREE_use-mainline-bsp = "imx6ul-14x14-evk.dtb"
> > > +KERNEL_DEVICETREE:use-mainline-bsp = "imx6ul-14x14-evk.dtb"
> > >
> > > ### u-boot-fslc settings ###
> > >
> > > -SPL_BINARY_pn-u-boot-fslc = "SPL"
> > > -UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > > +SPL_BINARY:pn-u-boot-fslc = "SPL"
> > > +UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> > >
> > > ### u-boot-imx settings ###
> > >
> > > # The u-boot-imx does not provide SPL support
> > > -SPL_BINARY_pn-u-boot-imx = ""
> > > -UBOOT_MAKE_TARGET_pn-u-boot-imx = "u-boot.imx"
> > > -UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > > +SPL_BINARY:pn-u-boot-imx = ""
> > > +UBOOT_MAKE_TARGET:pn-u-boot-imx = "u-boot.imx"
> > > +UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> > >
> > > WKS_FILE = " \
> > > ${@bb.utils.contains('IMX_DEFAULT_BOOTLOADER', \
> > > diff --git a/conf/machine/imx6ullevk.conf
> > > b/conf/machine/imx6ullevk.conf
> > > index bd592a20bf43..f5b7309fbe6b 100644
> > > --- a/conf/machine/imx6ullevk.conf
> > > +++ b/conf/machine/imx6ullevk.conf
> > > @@ -15,7 +15,7 @@ KERNEL_DEVICETREE = " \
> > > imx6ull-14x14-evk.dtb \
> > > "
> > >
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > imx6ull-14x14-evk-btwifi.dtb \
> > > imx6ull-14x14-evk-btwifi-oob.dtb \
> > > imx6ull-14x14-evk-emmc.dtb \
> > > diff --git a/conf/machine/imx6ulz-14x14-evk.conf
> > > b/conf/machine/imx6ulz-14x14-evk.conf
> > > index 7b794e7ccb13..a27f1ef11277 100644
> > > --- a/conf/machine/imx6ulz-14x14-evk.conf
> > > +++ b/conf/machine/imx6ulz-14x14-evk.conf
> > > @@ -14,7 +14,7 @@ MACHINE_FEATURES += "wifi bluetooth bcm4339
> > > bcm43455"
> > > KERNEL_DEVICETREE = " \
> > > imx6ulz-14x14-evk.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > imx6ulz-14x14-evk-btwifi.dtb \
> > > imx6ulz-14x14-evk-emmc.dtb \
> > > imx6ulz-14x14-evk-gpmi-weim.dtb \
> > > diff --git a/conf/machine/imx7dsabresd.conf
> > > b/conf/machine/imx7dsabresd.conf
> > > index e848f294395f..860c8007f711 100644
> > > --- a/conf/machine/imx7dsabresd.conf
> > > +++ b/conf/machine/imx7dsabresd.conf
> > > @@ -12,7 +12,7 @@ require conf/machine/include/tune-cortexa7.inc
> > > MACHINE_FEATURES += "pci wifi bluetooth bcm4339 bcm43455"
> > >
> > > KERNEL_DEVICETREE = "imx7d-sdb.dtb"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > imx7d-sdb-epdc.dtb \
> > > imx7d-sdb-gpmi-weim.dtb \
> > > imx7d-sdb-m4.dtb \
> > > diff --git a/conf/machine/imx7ulpevk.conf
> > > b/conf/machine/imx7ulpevk.conf
> > > index a587f44b388c..d685a90caca2 100644
> > > --- a/conf/machine/imx7ulpevk.conf
> > > +++ b/conf/machine/imx7ulpevk.conf
> > > @@ -14,10 +14,10 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43430"
> > > KERNEL_DEVICETREE = " \
> > > imx7ulp-evk.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-mainline-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-mainline-bsp = " \
> > > imx7ulp-com.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > imx7ulp-evk-ft5416.dtb \
> > > imx7ulp-evk-mipi.dtb \
> > > imx7ulp-evkb.dtb \
> > > diff --git a/conf/machine/imx8dxl-lpddr4-evk.conf
> > > b/conf/machine/imx8dxl-lpddr4-evk.conf
> > > index 1ea5260bb2c9..d44a4732128a 100644
> > > --- a/conf/machine/imx8dxl-lpddr4-evk.conf
> > > +++ b/conf/machine/imx8dxl-lpddr4-evk.conf
> > > @@ -5,7 +5,7 @@
> > >
> > > require conf/machine/include/imx8dxl-evk.inc
> > > KERNEL_DEVICETREE_BASENAME = "imx8dxl-evk"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-enet0.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-enet0-tja1100.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
> > > diff --git a/conf/machine/imx8mm-ddr4-evk.conf b/conf/machine/imx8mm-
> > > ddr4-evk.conf
> > > index 3901bb92c3a0..f21cc38148b9 100644
> > > --- a/conf/machine/imx8mm-ddr4-evk.conf
> > > +++ b/conf/machine/imx8mm-ddr4-evk.conf
> > > @@ -7,7 +7,7 @@
> > > require include/imx8mm-evk.inc
> > >
> > > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-revb-rm67191.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-revb.dtb \
> > > "
> > > diff --git a/conf/machine/imx8mm-lpddr4-evk.conf
> > > b/conf/machine/imx8mm-lpddr4-evk.conf
> > > index 6007c5404fc1..0a85ed20ac81 100644
> > > --- a/conf/machine/imx8mm-lpddr4-evk.conf
> > > +++ b/conf/machine/imx8mm-lpddr4-evk.conf
> > > @@ -8,7 +8,7 @@ require include/imx8mm-evk.inc
> > >
> > > # The device tree name is implicit for LPDDR4, so can't use MACHINE
> > > here
> > > KERNEL_DEVICETREE_BASENAME = "imx8mm-evk"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-swpdm.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-ak4497.dtb \
> > > diff --git a/conf/machine/imx8mn-ddr4-evk.conf b/conf/machine/imx8mn-
> > > ddr4-evk.conf
> > > index 442afdbd0547..d004d2aecb3b 100644
> > > --- a/conf/machine/imx8mn-ddr4-evk.conf
> > > +++ b/conf/machine/imx8mn-ddr4-evk.conf
> > > @@ -7,7 +7,7 @@
> > > require include/imx8mn-evk.inc
> > >
> > > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-usd-wifi.dtb \
> > > "
> > > UBOOT_CONFIG_BASENAME = "imx8mn_ddr4_evk"
> > > diff --git a/conf/machine/imx8mn-lpddr4-evk.conf
> > > b/conf/machine/imx8mn-lpddr4-evk.conf
> > > index 7c58bc19f8a2..2e5e6be9aa21 100644
> > > --- a/conf/machine/imx8mn-lpddr4-evk.conf
> > > +++ b/conf/machine/imx8mn-lpddr4-evk.conf
> > > @@ -8,7 +8,7 @@ require include/imx8mn-evk.inc
> > >
> > > # The device tree name is implicit for LPDDR4, so can't use MACHINE
> > > here
> > > KERNEL_DEVICETREE_BASENAME = "imx8mn-evk"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-8mic-revE.dtb \
> > > "
> > > UBOOT_CONFIG_BASENAME = "imx8mn_evk"
> > > diff --git a/conf/machine/imx8mp-ddr4-evk.conf b/conf/machine/imx8mp-
> > > ddr4-evk.conf
> > > index 09517769f00b..78e0c1608152 100644
> > > --- a/conf/machine/imx8mp-ddr4-evk.conf
> > > +++ b/conf/machine/imx8mp-ddr4-evk.conf
> > > @@ -8,7 +8,7 @@ require include/imx8mp-evk.inc
> > >
> > > # FIXME: This machine is not yet supported by u-boot-fslc, so for
> > > now
> > > # use u-boot-imx for mainline.
> > > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-imx"
> > > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-imx"
> > >
> > > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > >
> > > diff --git a/conf/machine/imx8mp-lpddr4-evk.conf
> > > b/conf/machine/imx8mp-lpddr4-evk.conf
> > > index cf926c08d0a1..76a1f44990fe 100644
> > > --- a/conf/machine/imx8mp-lpddr4-evk.conf
> > > +++ b/conf/machine/imx8mp-lpddr4-evk.conf
> > > @@ -11,7 +11,7 @@ KERNEL_DEVICETREE_BASENAME = "imx8mp-evk"
> > >
> > > # NXP kernel has additional DTB files for various board
> > > configuration and
> > > # derivates. Include them here for NXP BSP only
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/imx8mp-ab2.dtb \
> > > freescale/imx8mp-evk-basler.dtb \
> > > freescale/imx8mp-evk-basler-ov2775.dtb \
> > > diff --git a/conf/machine/imx8mq-evk.conf b/conf/machine/imx8mq-
> > > evk.conf
> > > index 9907ef4b26c2..b6dcd89026bb 100644
> > > --- a/conf/machine/imx8mq-evk.conf
> > > +++ b/conf/machine/imx8mq-evk.conf
> > > @@ -12,14 +12,14 @@ require conf/machine/include/tune-cortexa53.inc
> > > IMX_DEFAULT_BSP = "nxp"
> > >
> > > MACHINE_FEATURES += "pci wifi bluetooth optee bcm43455 bcm4356"
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> > >
> > > -MACHINE_SOCARCH_FILTER_append_mx8mq = " virtual/libopenvg
> > > virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa
> > > virtual/libgl virtual/libg2d"
> > > +MACHINE_SOCARCH_FILTER:append:mx8mq = " virtual/libopenvg
> > > virtual/libgles1 virtual/libgles2 virtual/egl virtual/mesa
> > > virtual/libgl virtual/libg2d"
> > >
> > > KERNEL_DEVICETREE = " \
> > > freescale/imx8mq-evk.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/imx8mq-evk-ak4497.dtb \
> > > freescale/imx8mq-evk-audio-tdm.dtb \
> > > freescale/imx8mq-evk-dcss-adv7535.dtb \
> > > @@ -40,8 +40,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > freescale/imx8mq-evk-usdhc2-m2.dtb \
> > > "
> > >
> > > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> > >
> > > UBOOT_SUFFIX = "bin"
> > >
> > > @@ -77,7 +77,7 @@ IMX_BOOT_SEEK = "33"
> > > OPTEE_BIN_EXT = "8mq"
> > >
> > > # Add additional firmware
> > > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > >
> > > # Use gstreamer 1.16 from meta-freescale
> > > PREFERRED_VERSION_gstreamer1.0 ?= "1.16.imx"
> > > diff --git a/conf/machine/imx8qm-mek.conf b/conf/machine/imx8qm-
> > > mek.conf
> > > index 5ceb6b8bb2f7..655c453f6262 100644
> > > --- a/conf/machine/imx8qm-mek.conf
> > > +++ b/conf/machine/imx8qm-mek.conf
> > > @@ -11,7 +11,7 @@ require conf/machine/include/tune-cortexa72-
> > > cortexa53.inc
> > > IMX_DEFAULT_BSP = "nxp"
> > >
> > > MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> > >
> > > # Don't include kernels in standard images
> > > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > > @@ -55,8 +55,8 @@ UBOOT_MAKE_TARGET = \
> > > SPL_BINARY = \
> > > "${@bb.utils.contains('MACHINE_FEATURES', 'optee', 'spl/u-boot-
> > > spl.bin', \
> > > '', d)}"
> > > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> > >
> > > UBOOT_SUFFIX = "bin"
> > >
> > > @@ -86,4 +86,4 @@ IMX_BOOT_SOC_TARGET = "iMX8QM"
> > > BOARD_TYPE = "mek"
> > >
> > > # Add additional firmware
> > > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > > diff --git a/conf/machine/imx8qxp-mek.conf b/conf/machine/imx8qxp-
> > > mek.conf
> > > index 5b29138fc3fd..29412cc35bc9 100644
> > > --- a/conf/machine/imx8qxp-mek.conf
> > > +++ b/conf/machine/imx8qxp-mek.conf
> > > @@ -8,7 +8,7 @@ MACHINEOVERRIDES =. "mx8qxp:"
> > > require include/imx8x-mek.inc
> > >
> > > KERNEL_DEVICETREE_BASENAME = "${MACHINE}"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-a0.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-dom0.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-dpu-lcdif.dtb \
> > > diff --git a/conf/machine/include/imx-base.inc
> > > b/conf/machine/include/imx-base.inc
> > > index f92a08af1c00..78f815d1310d 100644
> > > --- a/conf/machine/include/imx-base.inc
> > > +++ b/conf/machine/include/imx-base.inc
> > > @@ -13,8 +13,8 @@ require conf/machine/include/utilities.inc
> > > IMX_DEFAULT_BSP ?= "mainline"
> > >
> > > # Those are SoC families we'd like to force the use of mainline BSP.
> > > -IMX_DEFAULT_BSP_mxs ?= "mainline"
> > > -IMX_DEFAULT_BSP_mx5 ?= "mainline"
> > > +IMX_DEFAULT_BSP:mxs ?= "mainline"
> > > +IMX_DEFAULT_BSP:mx5 ?= "mainline"
> > >
> > > MACHINEOVERRIDES =. "use-${IMX_DEFAULT_BSP}-bsp:"
> > >
> > > @@ -32,16 +32,16 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
> > > # ,----[ imx6qdlsabresd.conf ]
> > > # | ### u-boot-fslc settings ###
> > > # |
> > > -# | SPL_BINARY_pn-u-boot-fslc = "SPL"
> > > -# | UBOOT_MACHINE_pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > > -# | UBOOT_SUFFIX_pn-u-boot-fslc = "img"
> > > +# | SPL_BINARY:pn-u-boot-fslc = "SPL"
> > > +# | UBOOT_MACHINE:pn-u-boot-fslc ?= "mx6sabresd_defconfig"
> > > +# | UBOOT_SUFFIX:pn-u-boot-fslc = "img"
> > > # |
> > > # | ### u-boot-imx settings ###
> > > # |
> > > # | # The u-boot-imx does not provide unified functionality for
> > > DL/Q/QP SoC
> > > # | # variants. Change the defconfig to the targeted SoC variant.
> > > -# | UBOOT_MACHINE_pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > > -# | UBOOT_SUFFIX_pn-u-boot-imx = "imx"
> > > +# | UBOOT_MACHINE:pn-u-boot-imx ?= "mx6qsabresd_defconfig"
> > > +# | UBOOT_SUFFIX:pn-u-boot-imx = "imx"
> > > # `----
> > > #
> > > # As result, the 'UBOOT_SUFFIX' is dynamically set based on the
> > > preferred U-Boot
> > > @@ -61,7 +61,7 @@ UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
> > > # | UBOOT_MACHINE = "mx53loco_config"
> > > # `----
> > > IMX_DEFAULT_BOOTLOADER ??= "u-boot-fslc"
> > > -UBOOT_SUFFIX ?= "${UBOOT_SUFFIX_pn-${IMX_DEFAULT_BOOTLOADER}}"
> > > +UBOOT_SUFFIX ?= "${UBOOT_SUFFIX:pn-${IMX_DEFAULT_BOOTLOADER}}"
> > >
> > > # We need to export the original variable to allow it to be used
> > > when generating
> > > # wic based images.
> > > @@ -75,33 +75,33 @@ PREFERRED_PROVIDER_virtual/bootloader ??=
> > > "${IMX_DEFAULT_BOOTLOADER}"
> > >
> > > PREFERRED_PROVIDER_u-boot-mxsboot-native ??= "u-boot-fslc-mxsboot-
> > > native"
> > >
> > > -UBOOT_ENTRYPOINT_mxs = "0x40008000"
> > > -UBOOT_ENTRYPOINT_mx51 = "0x90008000"
> > > -UBOOT_ENTRYPOINT_mx53 = "0x70008000"
> > > -UBOOT_ENTRYPOINT_mx6 = "0x10008000"
> > > -UBOOT_ENTRYPOINT_mx6sl = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx6sll = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx6sx = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx6ul = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx6ull = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx6ulz = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx7 = "0x80008000"
> > > -UBOOT_ENTRYPOINT_mx7ulp = "0x60008000"
> > > -UBOOT_ENTRYPOINT_mx8m = "0x40480000"
> > > -UBOOT_ENTRYPOINT_vf = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mxs = "0x40008000"
> > > +UBOOT_ENTRYPOINT:mx51 = "0x90008000"
> > > +UBOOT_ENTRYPOINT:mx53 = "0x70008000"
> > > +UBOOT_ENTRYPOINT:mx6 = "0x10008000"
> > > +UBOOT_ENTRYPOINT:mx6sl = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx6sll = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx6sx = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx6ul = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx6ull = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx6ulz = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx7 = "0x80008000"
> > > +UBOOT_ENTRYPOINT:mx7ulp = "0x60008000"
> > > +UBOOT_ENTRYPOINT:mx8m = "0x40480000"
> > > +UBOOT_ENTRYPOINT:vf = "0x80008000"
> > >
> > > # Some derivates can utilize the boot container provided by U-Boot,
> > > # below variable sets that those machines which have a imx-boot-
> > > container
> > > # in their MACHINEOVERRIDES can inherit a imx-boot-container class
> > > UBOOT_PROVIDES_BOOT_CONTAINER = "0"
> > > -UBOOT_PROVIDES_BOOT_CONTAINER_imx-boot-container = "1"
> > > +UBOOT_PROVIDES_BOOT_CONTAINER:imx-boot-container = "1"
> > >
> > > PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
> > > XSERVER_DRIVER = "xf86-video-fbdev"
> > > -XSERVER_DRIVER_imxgpu2d = "xf86-video-imx-vivante"
> > > -XSERVER_DRIVER_vf = "xf86-video-modesetting"
> > > -XSERVER_DRIVER_append_mx8 = " xf86-video-modesetting"
> > > -XSERVER_DRIVER_use-mainline-bsp = " \
> > > +XSERVER_DRIVER:imxgpu2d = "xf86-video-imx-vivante"
> > > +XSERVER_DRIVER:vf = "xf86-video-modesetting"
> > > +XSERVER_DRIVER:append:mx8 = " xf86-video-modesetting"
> > > +XSERVER_DRIVER:use-mainline-bsp = " \
> > > xf86-video-fbdev \
> > > xf86-video-modesetting \
> > > xserver-xorg-extension-glx \
> > > @@ -118,41 +118,41 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
> > > # ARM_INSTRUCTION_SET = "thumb"
> > > #
> > > # handled by software
> > > -# DEFAULTTUNE_mx6 ?= "cortexa9t-neon"
> > > +# DEFAULTTUNE:mx6 ?= "cortexa9t-neon"
> > > # handled by hardware
> > > -DEFAULTTUNE_mx6 ?= "cortexa9thf-neon"
> > > -DEFAULTTUNE_mx6ul ?= "cortexa7thf-neon"
> > > -DEFAULTTUNE_mx6ull ?= "cortexa7thf-neon"
> > > -DEFAULTTUNE_mx6ulz ?= "cortexa7thf-neon"
> > > -DEFAULTTUNE_mx7 ?= "cortexa7thf-neon"
> > > -DEFAULTTUNE_vf ?= "cortexa5thf-neon"
> > > +DEFAULTTUNE:mx6 ?= "cortexa9thf-neon"
> > > +DEFAULTTUNE:mx6ul ?= "cortexa7thf-neon"
> > > +DEFAULTTUNE:mx6ull ?= "cortexa7thf-neon"
> > > +DEFAULTTUNE:mx6ulz ?= "cortexa7thf-neon"
> > > +DEFAULTTUNE:mx7 ?= "cortexa7thf-neon"
> > > +DEFAULTTUNE:vf ?= "cortexa5thf-neon"
> > >
> > > -DEFAULTTUNE_mx8m ?= "cortexa53-crypto"
> > > -DEFAULTTUNE_mx8qm ?= "cortexa72-cortexa53-crypto"
> > > -DEFAULTTUNE_mx8qxp ?= "cortexa35-crypto"
> > > +DEFAULTTUNE:mx8m ?= "cortexa53-crypto"
> > > +DEFAULTTUNE:mx8qm ?= "cortexa72-cortexa53-crypto"
> > > +DEFAULTTUNE:mx8qxp ?= "cortexa35-crypto"
> > >
> > > INHERIT += "machine-overrides-extender"
> > >
> > > -MACHINEOVERRIDES_EXTENDER_mx25 = "use-mainline-bsp"
> > > -MACHINEOVERRIDES_EXTENDER_mx6q =
> > > "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx6dl =
> > > "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
> > > -MACHINEOVERRIDES_EXTENDER_mx6sx =
> > > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx6sl =
> > > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
> > > -MACHINEOVERRIDES_EXTENDER_mx6sll = "imxfbdev:imxpxp:imxepdc"
> > > -MACHINEOVERRIDES_EXTENDER_mx6ul = "imxfbdev:imxpxp"
> > > -MACHINEOVERRIDES_EXTENDER_mx6ull = "imxfbdev:imxpxp:imxepdc"
> > > -MACHINEOVERRIDES_EXTENDER_mx6ulz = "imxfbdev:imxpxp:imxepdc"
> > > -MACHINEOVERRIDES_EXTENDER_mx7d = "imxfbdev:imxpxp:imxepdc"
> > > -MACHINEOVERRIDES_EXTENDER_mx7ulp =
> > > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8qm =
> > > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8mm =
> > > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8mn = "imxdrm:imxgpu:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8mp =
> > > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8qxp =
> > > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > > -MACHINEOVERRIDES_EXTENDER_mx8dxl = "imxfbdev"
> > > -
> > > -MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp = " \
> > > +MACHINEOVERRIDES_EXTENDER:mx25 = "use-mainline-bsp"
> > > +MACHINEOVERRIDES_EXTENDER:mx6q =
> > > "imxfbdev:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx6dl =
> > > "imxfbdev:imxpxp:imxipu:imxvpu:imxgpu:imxgpu2d:imxgpu3d:imxepdc"
> > > +MACHINEOVERRIDES_EXTENDER:mx6sx =
> > > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx6sl =
> > > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxepdc"
> > > +MACHINEOVERRIDES_EXTENDER:mx6sll = "imxfbdev:imxpxp:imxepdc"
> > > +MACHINEOVERRIDES_EXTENDER:mx6ul = "imxfbdev:imxpxp"
> > > +MACHINEOVERRIDES_EXTENDER:mx6ull = "imxfbdev:imxpxp:imxepdc"
> > > +MACHINEOVERRIDES_EXTENDER:mx6ulz = "imxfbdev:imxpxp:imxepdc"
> > > +MACHINEOVERRIDES_EXTENDER:mx7d = "imxfbdev:imxpxp:imxepdc"
> > > +MACHINEOVERRIDES_EXTENDER:mx7ulp =
> > > "imxfbdev:imxpxp:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8qm =
> > > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8mm =
> > > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8mn = "imxdrm:imxgpu:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8mp =
> > > "imxdrm:imxvpu:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8mq = "imxdrm:imxvpu:imxgpu:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8qxp =
> > > "imxdrm:imxdpu:imxgpu:imxgpu2d:imxgpu3d"
> > > +MACHINEOVERRIDES_EXTENDER:mx8dxl = "imxfbdev"
> > > +
> > > +MACHINEOVERRIDES_EXTENDER_FILTER_OUT:use-mainline-bsp = " \
> > > imx \
> > > \
> > > mx6 \
> > > @@ -182,40 +182,40 @@ MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-
> > > mainline-bsp = " \
> > >
> > > # Sub-architecture support
> > > MACHINE_SOCARCH_SUFFIX ?= ""
> > > -MACHINE_SOCARCH_SUFFIX_mx6q = "-mx6qdl"
> > > -MACHINE_SOCARCH_SUFFIX_mx6dl = "-mx6qdl"
> > > -MACHINE_SOCARCH_SUFFIX_mx6sx = "-mx6sx"
> > > -MACHINE_SOCARCH_SUFFIX_mx6sl = "-mx6sl"
> > > -MACHINE_SOCARCH_SUFFIX_mx6sll= "-mx6sll"
> > > -MACHINE_SOCARCH_SUFFIX_mx7d = "-mx7d"
> > > -MACHINE_SOCARCH_SUFFIX_mx7ulp = "-mx7ulp"
> > > -MACHINE_SOCARCH_SUFFIX_vf60 = "-vf60"
> > > -MACHINE_SOCARCH_SUFFIX_vf50 = "-vf50"
> > > -MACHINE_SOCARCH_SUFFIX_mx6ul = "-mx6ul"
> > > -MACHINE_SOCARCH_SUFFIX_mx6ull = "-mx6ul"
> > > -MACHINE_SOCARCH_SUFFIX_mx6ulz = "-mx6ul"
> > > -MACHINE_SOCARCH_SUFFIX_mx8qm = "-mx8"
> > > -MACHINE_SOCARCH_SUFFIX_mx8mm = "-mx8mm"
> > > -MACHINE_SOCARCH_SUFFIX_mx8mn = "-mx8mn"
> > > -MACHINE_SOCARCH_SUFFIX_mx8mp = "-mx8mp"
> > > -MACHINE_SOCARCH_SUFFIX_mx8mq = "-mx8m"
> > > -MACHINE_SOCARCH_SUFFIX_mx8qxp = "-mx8"
> > > -MACHINE_SOCARCH_SUFFIX_mx8dxl = "-mx8dxl"
> > > -MACHINE_SOCARCH_SUFFIX_use-mainline-bsp = "-imx"
> > > +MACHINE_SOCARCH_SUFFIX:mx6q = "-mx6qdl"
> > > +MACHINE_SOCARCH_SUFFIX:mx6dl = "-mx6qdl"
> > > +MACHINE_SOCARCH_SUFFIX:mx6sx = "-mx6sx"
> > > +MACHINE_SOCARCH_SUFFIX:mx6sl = "-mx6sl"
> > > +MACHINE_SOCARCH_SUFFIX:mx6sll= "-mx6sll"
> > > +MACHINE_SOCARCH_SUFFIX:mx7d = "-mx7d"
> > > +MACHINE_SOCARCH_SUFFIX:mx7ulp = "-mx7ulp"
> > > +MACHINE_SOCARCH_SUFFIX:vf60 = "-vf60"
> > > +MACHINE_SOCARCH_SUFFIX:vf50 = "-vf50"
> > > +MACHINE_SOCARCH_SUFFIX:mx6ul = "-mx6ul"
> > > +MACHINE_SOCARCH_SUFFIX:mx6ull = "-mx6ul"
> > > +MACHINE_SOCARCH_SUFFIX:mx6ulz = "-mx6ul"
> > > +MACHINE_SOCARCH_SUFFIX:mx8qm = "-mx8"
> > > +MACHINE_SOCARCH_SUFFIX:mx8mm = "-mx8mm"
> > > +MACHINE_SOCARCH_SUFFIX:mx8mn = "-mx8mn"
> > > +MACHINE_SOCARCH_SUFFIX:mx8mp = "-mx8mp"
> > > +MACHINE_SOCARCH_SUFFIX:mx8mq = "-mx8m"
> > > +MACHINE_SOCARCH_SUFFIX:mx8qxp = "-mx8"
> > > +MACHINE_SOCARCH_SUFFIX:mx8dxl = "-mx8dxl"
> > > +MACHINE_SOCARCH_SUFFIX:use-mainline-bsp = "-imx"
> > >
> > > MACHINE_ARCH_FILTER = "virtual/kernel"
> > > -MACHINE_SOCARCH_FILTER_append_imx = " \
> > > +MACHINE_SOCARCH_FILTER:append:imx = " \
> > > alsa-lib \
> > > gstreamer1.0 \
> > > weston \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_imxvpu = " \
> > > +MACHINE_SOCARCH_FILTER:append:imxvpu = " \
> > > imx-codec \
> > > imx-vpuwrap \
> > > libimxvpuapi \
> > > virtual/imxvpu \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_imxgpu = " \
> > > +MACHINE_SOCARCH_FILTER:append:imxgpu = " \
> > > virtual/egl \
> > > virtual/mesa \
> > > virtual/libopenvg \
> > > @@ -225,15 +225,15 @@ MACHINE_SOCARCH_FILTER_append_imxgpu = " \
> > > opencv \
> > > pango \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_imxgpu2d = " \
> > > +MACHINE_SOCARCH_FILTER:append:imxgpu2d = " \
> > > virtual/libg2d \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_imxgpu3d = " \
> > > +MACHINE_SOCARCH_FILTER:append:imxgpu3d = " \
> > > virtual/libgl \
> > > virtual/libgles1 \
> > > virtual/libgles2 \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_use-mainline-bsp = " \
> > > +MACHINE_SOCARCH_FILTER:append:use-mainline-bsp = " \
> > > virtual/egl \
> > > virtual/libopenvg \
> > > virtual/libg2d \
> > > @@ -245,23 +245,23 @@ MACHINE_SOCARCH_FILTER_append_use-mainline-bsp
> > > = " \
> > > pango \
> > > qtbase \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_mx6q = " \
> > > +MACHINE_SOCARCH_FILTER:append:mx6q = " \
> > > opencl-icd-loader \
> > > opencl-clhpp \
> > > opencl-headers \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_mx8 = " \
> > > +MACHINE_SOCARCH_FILTER:append:mx8 = " \
> > > opencl-icd-loader \
> > > opencl-clhpp \
> > > opencl-headers \
> > > "
> > > -MACHINE_SOCARCH_FILTER_append_mx8qm = " \
> > > +MACHINE_SOCARCH_FILTER:append:mx8qm = " \
> > > virtual/libopenvx \
> > > "
> > >
> > > INHERIT += "fsl-dynamic-packagearch"
> > >
> > > -SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
> > > +SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS:append = " \
> > > imx-gpu-viv->kernel-module-imx-gpu-viv \
> > > libimxvpuapi->virtual/imxvpu \
> > > imx-vpuwrap->virtual/imxvpu \
> > > @@ -271,44 +271,44 @@ SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS_append = " \
> > >
> > > # Firmware
> > > MACHINE_FIRMWARE ?= ""
> > > -MACHINE_FIRMWARE_append_mx25 = " firmware-imx-sdma-imx25"
> > > -MACHINE_FIRMWARE_append_mx27 = " firmware-imx-vpu-imx27"
> > > -MACHINE_FIRMWARE_append_mx7d = " linux-firmware-imx-sdma-imx7d
> > > firmware-imx-epdc"
> > > -MACHINE_FIRMWARE_append_mx6 = " linux-firmware-imx-sdma-imx6q"
> > > -MACHINE_FIRMWARE_append_mx6q = " firmware-imx-vpu-imx6q"
> > > -MACHINE_FIRMWARE_append_mx6dl = " firmware-imx-vpu-imx6d firmware-
> > > imx-epdc"
> > > -MACHINE_FIRMWARE_append_mx6sl = " firmware-imx-epdc"
> > > -MACHINE_FIRMWARE_append_mx6sll = " firmware-imx-epdc"
> > > -MACHINE_FIRMWARE_append_mx6ull = " firmware-imx-epdc"
> > > -MACHINE_FIRMWARE_append_mx53 = " firmware-imx-vpu-imx53 firmware-
> > > imx-sdma-imx53"
> > > -MACHINE_FIRMWARE_append_mx51 = " firmware-imx-vpu-imx51 firmware-
> > > imx-sdma-imx51"
> > > -MACHINE_FIRMWARE_append_mx8mm = " linux-firmware-imx-sdma-imx7d"
> > > -MACHINE_FIRMWARE_append_mx8mn = " linux-firmware-imx-sdma-imx7d"
> > > -MACHINE_FIRMWARE_append_mx8mp = " linux-firmware-imx-sdma-imx7d
> > > firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
> > > -MACHINE_FIRMWARE_append_mx8mq = " linux-firmware-imx-sdma-imx7d"
> > > -MACHINE_FIRMWARE_append_mx8qm = " firmware-imx-vpu-imx8"
> > > -MACHINE_FIRMWARE_append_mx8qxp = " firmware-imx-vpu-imx8"
> > > -MACHINE_FIRMWARE_append_use-mainline-bsp = " linux-firmware-imx-
> > > sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q
> > > firmware-imx-vpu-imx6d"
> > > +MACHINE_FIRMWARE:append:mx25 = " firmware-imx-sdma-imx25"
> > > +MACHINE_FIRMWARE:append:mx27 = " firmware-imx-vpu-imx27"
> > > +MACHINE_FIRMWARE:append:mx7d = " linux-firmware-imx-sdma-imx7d
> > > firmware-imx-epdc"
> > > +MACHINE_FIRMWARE:append:mx6 = " linux-firmware-imx-sdma-imx6q"
> > > +MACHINE_FIRMWARE:append:mx6q = " firmware-imx-vpu-imx6q"
> > > +MACHINE_FIRMWARE:append:mx6dl = " firmware-imx-vpu-imx6d firmware-
> > > imx-epdc"
> > > +MACHINE_FIRMWARE:append:mx6sl = " firmware-imx-epdc"
> > > +MACHINE_FIRMWARE:append:mx6sll = " firmware-imx-epdc"
> > > +MACHINE_FIRMWARE:append:mx6ull = " firmware-imx-epdc"
> > > +MACHINE_FIRMWARE:append:mx53 = " firmware-imx-vpu-imx53 firmware-
> > > imx-sdma-imx53"
> > > +MACHINE_FIRMWARE:append:mx51 = " firmware-imx-vpu-imx51 firmware-
> > > imx-sdma-imx51"
> > > +MACHINE_FIRMWARE:append:mx8mm = " linux-firmware-imx-sdma-imx7d"
> > > +MACHINE_FIRMWARE:append:mx8mn = " linux-firmware-imx-sdma-imx7d"
> > > +MACHINE_FIRMWARE:append:mx8mp = " linux-firmware-imx-sdma-imx7d
> > > firmware-imx-easrc-imx8mn firmware-imx-xcvr-imx8mp firmware-sof-imx"
> > > +MACHINE_FIRMWARE:append:mx8mq = " linux-firmware-imx-sdma-imx7d"
> > > +MACHINE_FIRMWARE:append:mx8qm = " firmware-imx-vpu-imx8"
> > > +MACHINE_FIRMWARE:append:mx8qxp = " firmware-imx-vpu-imx8"
> > > +MACHINE_FIRMWARE:append:use-mainline-bsp = " linux-firmware-imx-
> > > sdma-imx6q linux-firmware-imx-sdma-imx7d firmware-imx-vpu-imx6q
> > > firmware-imx-vpu-imx6d"
> > >
> > > MACHINE_EXTRA_RRECOMMENDS += "${MACHINE_FIRMWARE}"
> > >
> > > # Extra audio support
> > > IMX_ALSA_EXTRA = ""
> > > -IMX_ALSA_EXTRA_use-nxp-bsp = "imx-alsa-plugins"
> > > -MACHINE_EXTRA_RRECOMMENDS_append_mx6 = "
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > > '', d)}"
> > > -MACHINE_EXTRA_RRECOMMENDS_append_mx7 = "
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > > '', d)}"
> > > -MACHINE_EXTRA_RRECOMMENDS_append_mx8 = "
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > > '', d)}"
> > > +IMX_ALSA_EXTRA:use-nxp-bsp = "imx-alsa-plugins"
> > > +MACHINE_EXTRA_RRECOMMENDS:append:mx6 = "
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > > '', d)}"
> > > +MACHINE_EXTRA_RRECOMMENDS:append:mx7 = "
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > > '', d)}"
> > > +MACHINE_EXTRA_RRECOMMENDS:append:mx8 = "
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'alsa', '${IMX_ALSA_EXTRA}',
> > > '', d)}"
> > >
> > > # Extra Cypress Wi-Fi and BTW firmware (Murata)
> > > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
> > > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
> > > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
> > > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
> > > -MACHINE_FIRMWARE_append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
> > > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm4339', 'linux-firmware-bcm4339', '', d)}"
> > > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm43430', 'linux-firmware-bcm43430', '', d)}"
> > > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm43455', 'linux-firmware-bcm43455', '', d)}"
> > > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm4356', 'linux-firmware-bcm4356-pcie', '', d)}"
> > > +MACHINE_FIRMWARE:append = " ${@bb.utils.contains('MACHINE_FEATURES',
> > > 'bcm4359', 'linux-firmware-bcm4359-pcie', '', d)}"
> > >
> > > # Extra QCA Wi-Fi & BTE driver and firmware
> > > -MACHINE_EXTRA_RRECOMMENDS_append = "
> > > ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-
> > > fsl-qca6174', '', d)}"
> > > -MACHINE_EXTRA_RRECOMMENDS_append = "
> > > ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-
> > > fsl-qca9377', '', d)}"
> > > +MACHINE_EXTRA_RRECOMMENDS:append = "
> > > ${@bb.utils.contains('MACHINE_FEATURES', 'qca6174', 'packagegroup-
> > > fsl-qca6174', '', d)}"
> > > +MACHINE_EXTRA_RRECOMMENDS:append = "
> > > ${@bb.utils.contains('MACHINE_FEATURES', 'qca9377', 'packagegroup-
> > > fsl-qca9377', '', d)}"
> > >
> > > # Extra udev rules
> > > MACHINE_EXTRA_RRECOMMENDS += "udev-rules-imx"
> > > @@ -320,29 +320,29 @@ MACHINE_EXTRA_RRECOMMENDS += " \
> > >
> > > # GStreamer 1.0 plugins
> > > MACHINE_GSTREAMER_1_0_PLUGIN ?= ""
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6dl ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6q ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6sl ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6sx ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6ul ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx6ull ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx7d ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mm ?= "imx-gst1.0-plugin"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mn ?= "imx-gst1.0-plugin"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mp ?= "imx-gst1.0-plugin"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8mq ?= "imx-gst1.0-plugin"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8qm ?= "imx-gst1.0-plugin"
> > > -MACHINE_GSTREAMER_1_0_PLUGIN_mx8qxp ?= "imx-gst1.0-plugin"
> > > -
> > > -PREFERRED_VERSION_gstreamer1.0_mx8 ?= "1.16.2.imx"
> > > -PREFERRED_VERSION_gstreamer1.0-plugins-base_mx8 ?= "1.16.2.imx"
> > > -PREFERRED_VERSION_gstreamer1.0-plugins-good_mx8 ?= "1.16.3.imx"
> > > -PREFERRED_VERSION_gstreamer1.0-plugins-bad_mx8 ?= "1.16.3.imx"
> > > -PREFERRED_VERSION_gstreamer1.0-libav_mx8 ?= "1.16.0"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6dl ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6q ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6sl ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6sx ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6ul ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx6ull ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx7d ?= "gstreamer1.0-plugins-imx-
> > > meta"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mm ?= "imx-gst1.0-plugin"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mn ?= "imx-gst1.0-plugin"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mp ?= "imx-gst1.0-plugin"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8mq ?= "imx-gst1.0-plugin"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8qm ?= "imx-gst1.0-plugin"
> > > +MACHINE_GSTREAMER_1_0_PLUGIN:mx8qxp ?= "imx-gst1.0-plugin"
> > > +
> > > +PREFERRED_VERSION_gstreamer1.0:mx8 ?= "1.16.2.imx"
> > > +PREFERRED_VERSION_gstreamer1.0-plugins-base:mx8 ?= "1.16.2.imx"
> > > +PREFERRED_VERSION_gstreamer1.0-plugins-good:mx8 ?= "1.16.3.imx"
> > > +PREFERRED_VERSION_gstreamer1.0-plugins-bad:mx8 ?= "1.16.3.imx"
> > > +PREFERRED_VERSION_gstreamer1.0-libav:mx8 ?= "1.16.0"
> > >
> > > # Determines if the SoC has support for Vivante kernel driver
> > > SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT = "0"
> > > -SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT_imxgpu = "1"
> > > +SOC_HAS_VIVANTE_KERNEL_DRIVER_SUPPORT:imxgpu = "1"
> > >
> > > # Handle Vivante kernel driver setting:
> > > # 0 - machine does not have Vivante GPU driver support
> > > @@ -355,59 +355,59 @@ PREFERRED_PROVIDER_virtual/libgl ?= "mesa"
> > > PREFERRED_PROVIDER_virtual/libgles1 ?= "mesa"
> > > PREFERRED_PROVIDER_virtual/libgles2 ?= "mesa"
> > >
> > > -PREFERRED_PROVIDER_virtual/egl_imxgpu ?= "imx-gpu-viv"
> > > -PREFERRED_PROVIDER_virtual/libgl_imxgpu3d ?= "imx-gpu-viv"
> > > -PREFERRED_PROVIDER_virtual/libgles1_imxgpu3d ?= "imx-gpu-viv"
> > > -PREFERRED_PROVIDER_virtual/libgles2_imxgpu3d ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_virtual/egl:imxgpu ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_virtual/libgl:imxgpu3d ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_virtual/libgles1:imxgpu3d ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_virtual/libgles2:imxgpu3d ?= "imx-gpu-viv"
> > > PREFERRED_PROVIDER_virtual/libg2d ?= "imx-gpu-g2d"
> > > -PREFERRED_PROVIDER_virtual/libg2d_imxdpu ?= "imx-dpu-g2d"
> > > -PREFERRED_PROVIDER_opencl-clhpp_imxgpu ?= "imx-gpu-viv"
> > > -PREFERRED_PROVIDER_opencl-headers_imxgpu ?= "imx-gpu-viv"
> > > -PREFERRED_PROVIDER_opencl-icd-loader_imxgpu ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_virtual/libg2d:imxdpu ?= "imx-dpu-g2d"
> > > +PREFERRED_PROVIDER_opencl-clhpp:imxgpu ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_opencl-headers:imxgpu ?= "imx-gpu-viv"
> > > +PREFERRED_PROVIDER_opencl-icd-loader:imxgpu ?= "imx-gpu-viv"
> > >
> > > -PREFERRED_VERSION_weston_imx ?= "9.0.0.imx"
> > > -PREFERRED_VERSION_weston_use-mainline-bsp = ""
> > > +PREFERRED_VERSION_weston:imx ?= "9.0.0.imx"
> > > +PREFERRED_VERSION_weston:use-mainline-bsp = ""
> > >
> > > -PREFERRED_VERSION_wayland-protocols_mx6 ?= "1.20.imx"
> > > -PREFERRED_VERSION_wayland-protocols_mx7 ?= "1.20.imx"
> > > -PREFERRED_VERSION_wayland-protocols_mx8 ?= "1.20.imx"
> > > +PREFERRED_VERSION_wayland-protocols:mx6 ?= "1.20.imx"
> > > +PREFERRED_VERSION_wayland-protocols:mx7 ?= "1.20.imx"
> > > +PREFERRED_VERSION_wayland-protocols:mx8 ?= "1.20.imx"
> > >
> > > # Use i.MX libdrm Version
> > > -PREFERRED_VERSION_libdrm_mx6 ?= "2.4.102.imx"
> > > -PREFERRED_VERSION_libdrm_mx7 ?= "2.4.102.imx"
> > > -PREFERRED_VERSION_libdrm_mx8 ?= "2.4.102.imx"
> > > +PREFERRED_VERSION_libdrm:mx6 ?= "2.4.102.imx"
> > > +PREFERRED_VERSION_libdrm:mx7 ?= "2.4.102.imx"
> > > +PREFERRED_VERSION_libdrm:mx8 ?= "2.4.102.imx"
> > >
> > > # Use i.MX optee Version
> > > -PREFERRED_VERSION_optee-os_mx8 ?= "3.10.0.imx"
> > > -PREFERRED_VERSION_optee-client_mx8 ?= "3.10.0.imx"
> > > -PREFERRED_VERSION_optee-test_mx8 ?= "3.10.0.imx"
> > > +PREFERRED_VERSION_optee-os:mx8 ?= "3.10.0.imx"
> > > +PREFERRED_VERSION_optee-client:mx8 ?= "3.10.0.imx"
> > > +PREFERRED_VERSION_optee-test:mx8 ?= "3.10.0.imx"
> > >
> > > #Use i.MX opencv Version for mx8
> > > -PREFERRED_VERSION_opencv_mx8 ?= "4.5.2.imx"
> > > +PREFERRED_VERSION_opencv:mx8 ?= "4.5.2.imx"
> > >
> > > # Handle default kernel
> > > IMX_DEFAULT_KERNEL = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mxs = "linux-fslc"
> > > -IMX_DEFAULT_KERNEL_mx5 = "linux-fslc"
> > > -IMX_DEFAULT_KERNEL_mx6 = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mx7 = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mx8 = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mx7ulp = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mx6sll = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mx6ul = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_mx6ull = "linux-fslc-imx"
> > > -IMX_DEFAULT_KERNEL_use-mainline-bsp = "linux-fslc"
> > > +IMX_DEFAULT_KERNEL:mxs = "linux-fslc"
> > > +IMX_DEFAULT_KERNEL:mx5 = "linux-fslc"
> > > +IMX_DEFAULT_KERNEL:mx6 = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:mx7 = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:mx8 = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:mx7ulp = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:mx6sll = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:mx6ul = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:mx6ull = "linux-fslc-imx"
> > > +IMX_DEFAULT_KERNEL:use-mainline-bsp = "linux-fslc"
> > >
> > > PREFERRED_PROVIDER_virtual/kernel ??= "${IMX_DEFAULT_KERNEL}"
> > >
> > > SOC_DEFAULT_IMAGE_FSTYPES = "wic.bmap wic.gz"
> > > -SOC_DEFAULT_IMAGE_FSTYPES_mxs = "uboot-mxsboot-sdcard wic.bmap
> > > wic.gz"
> > > +SOC_DEFAULT_IMAGE_FSTYPES:mxs = "uboot-mxsboot-sdcard wic.bmap
> > > wic.gz"
> > >
> > > # Do not update fstab file when using wic images
> > > WIC_CREATE_EXTRA_ARGS ?= "--no-fstab-update"
> > >
> > > OPTEE_BOOT_IMAGE = "uTee"
> > > -OPTEE_BOOT_IMAGE_aarch64 = ""
> > > +OPTEE_BOOT_IMAGE:aarch64 = ""
> > >
> > > IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
> > >
> > > @@ -419,7 +419,7 @@ IMAGE_BOOT_FILES ?= " \
> > >
> > > ### wic default support
> > > OPTEE_WKS_FILE_DEPENDS = "optee-os"
> > > -OPTEE_WKS_FILE_DEPENDS_aarch64 = ""
> > > +OPTEE_WKS_FILE_DEPENDS:aarch64 = ""
> > >
> > > WKS_FILE_DEPENDS ?= " \
> > > virtual/bootloader \
> > > @@ -429,8 +429,8 @@ WKS_FILE_DEPENDS ?= " \
> > > ${@bb.utils.contains('MACHINE_FEATURES', 'optee',
> > > '${OPTEE_WKS_FILE_DEPENDS}', '', d)} \
> > > "
> > >
> > > -WKS_FILE_DEPENDS_append_mx8 = " imx-boot"
> > > -WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
> > > +WKS_FILE_DEPENDS:append:mx8 = " imx-boot"
> > > +WKS_FILE_DEPENDS:append:mx8m = " imx-boot"
> > >
> > > # We need to restrict the append so we don't add this for other i.MX
> > > SoC's.
> > > # Derivatives that are not yet adopted the usage of boot container
> > > provided
> > > @@ -444,15 +444,15 @@ WKS_FILE_DEPENDS_append_mx8m = " imx-boot"
> > > # deployment task extesion execution defined in imx-boot-container
> > > class.
> > > # For NXP BSP: rename is done in 'imx-boot' recipe at the execution
> > > of compile
> > > # task.
> > > -WKS_FILE_DEPENDS_append_use-mainline-bsp_aarch64 = " \
> > > +WKS_FILE_DEPENDS:append:use-mainline-bsp:aarch64 = " \
> > > ${@oe.utils.ifelse(d.getVar('UBOOT_PROVIDES_BOOT_CONTAINER') ==
> > > '0', 'imx-boot', '')} \
> > > "
> > >
> > > SOC_DEFAULT_WKS_FILE ?= "imx-uboot-bootpart.wks.in"
> > > -SOC_DEFAULT_WKS_FILE_mx8m ?= "imx-imx-boot-bootpart.wks.in"
> > > +SOC_DEFAULT_WKS_FILE:mx8m ?= "imx-imx-boot-bootpart.wks.in"
> > >
> > > -SOC_DEFAULT_WKS_FILE_mx8 ?= "imx-imx-boot-bootpart.wks.in"
> > > -SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-bootpart.wks.in"
> > > +SOC_DEFAULT_WKS_FILE:mx8 ?= "imx-imx-boot-bootpart.wks.in"
> > > +SOC_DEFAULT_WKS_FILE:mxs ?= "imx-uboot-mxs-bootpart.wks.in"
> > >
> > > # Boot container built as a part of mainline U-Boot uses different
> > > WKS
> > > # file as the entire mx8m series, as U-Boot versions later than
> > > 2021.04 are
> > > @@ -462,19 +462,19 @@ SOC_DEFAULT_WKS_FILE_mxs ?= "imx-uboot-mxs-
> > > bootpart.wks.in"
> > > # replacement of imx-boot from NXP.
> > > # Creation of those binary files is controlled by
> > > UBOOT_PROVIDES_BOOT_CONTAINER
> > > # variable defined above.
> > > -SOC_DEFAULT_WKS_FILE_imx-boot-container ?= "imx-boot-container-
> > > bootpart.wks.in"
> > > +SOC_DEFAULT_WKS_FILE:imx-boot-container ?= "imx-boot-container-
> > > bootpart.wks.in"
> > >
> > > WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
> > >
> > > SERIAL_CONSOLES = "115200;ttymxc0"
> > > -SERIAL_CONSOLES_mxs = "115200;ttyAMA0"
> > > +SERIAL_CONSOLES:mxs = "115200;ttyAMA0"
> > >
> > > KERNEL_IMAGETYPE = "zImage"
> > > -KERNEL_IMAGETYPE_aarch64 = "Image"
> > > +KERNEL_IMAGETYPE:aarch64 = "Image"
> > >
> > > MACHINE_FEATURES = "usbgadget usbhost vfat alsa touchscreen"
> > >
> > > -# Add the ability to specify _imx machines
> > > +# Add the ability to specify :imx machines
> > > MACHINEOVERRIDES =. "imx:"
> > >
> > > -HOSTTOOLS_NONFATAL_append_mx8 = " sha384sum"
> > > +HOSTTOOLS_NONFATAL:append:mx8 = " sha384sum"
> > > diff --git a/conf/machine/include/imx8dxl-evk.inc
> > > b/conf/machine/include/imx8dxl-evk.inc
> > > index 2868b4d6c1c3..4e75f8c4bbd3 100644
> > > --- a/conf/machine/include/imx8dxl-evk.inc
> > > +++ b/conf/machine/include/imx8dxl-evk.inc
> > > @@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
> > > IMX_DEFAULT_BSP = "nxp"
> > >
> > > MACHINE_FEATURES += "pci bcm43455 bcm4356"
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> > >
> > > # Don't include kernels in standard images
> > > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > > @@ -23,7 +23,7 @@ USE_VT = "0"
> > > KERNEL_DEVICETREE = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-rpmsg.dtb \
> > > "
> > >
> > > diff --git a/conf/machine/include/imx8mm-evk.inc
> > > b/conf/machine/include/imx8mm-evk.inc
> > > index f458c56de9b7..1295de1d8271 100644
> > > --- a/conf/machine/include/imx8mm-evk.inc
> > > +++ b/conf/machine/include/imx8mm-evk.inc
> > > @@ -11,19 +11,19 @@ MACHINE_FEATURES += "pci wifi bluetooth bcm43455
> > > bcm4356"
> > > # and pin it to NXP BSP only
> > > # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to
> > > have
> > > # a full support for it yet.
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359
> > > qca9377"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359
> > > qca9377"
> > >
> > > KERNEL_DEVICETREE = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-pcie-ep.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
> > > "
> > > UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
> > >
> > > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> > >
> > > UBOOT_SUFFIX = "bin"
> > >
> > > @@ -51,18 +51,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> > > # to be used to define the boot process.
> > > # We opt-in for Syslinux, since it is designated as a preferred
> > > # distro boot mode according to the U-Boot documentation.
> > > -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> > > -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> > > -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Mini EVK"
> > > +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> > > +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> > > +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Mini EVK"
> > >
> > > -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M
> > > Mini EVK"
> > > -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp =
> > > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > > -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp =
> > > "console=${console}"
> > > -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp =
> > > "root=/dev/mmcblk1p2"
> > > +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M
> > > Mini EVK"
> > > +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp =
> > > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > > +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp =
> > > "console=${console}"
> > > +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp =
> > > "root=/dev/mmcblk1p2"
> > >
> > > # Add extlinux.conf to the lis of files, which are deployed onto the
> > > # boot partition
> > > -IMAGE_BOOT_FILES_append_use-mainline-bsp = "
> > > extlinux.conf;extlinux/extlinux.conf"
> > > +IMAGE_BOOT_FILES:append:use-mainline-bsp = "
> > > extlinux.conf;extlinux/extlinux.conf"
> > >
> > > LOADADDR = ""
> > > UBOOT_SUFFIX = "bin"
> > > @@ -73,4 +73,4 @@ OPTEE_BIN_EXT = "8mm"
> > > TEE_LOAD_ADDR = "0xbe000000"
> > >
> > > # Add additional firmware
> > > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > > diff --git a/conf/machine/include/imx8mn-evk.inc
> > > b/conf/machine/include/imx8mn-evk.inc
> > > index a0e39857c770..411004000b66 100644
> > > --- a/conf/machine/include/imx8mn-evk.inc
> > > +++ b/conf/machine/include/imx8mn-evk.inc
> > > @@ -8,12 +8,12 @@ MACHINE_FEATURES += "wifi bluetooth bcm43455
> > > bcm4356"
> > > # NXP BSP can consume proprietary jailhouse and Broadcom drivers
> > > # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to
> > > have
> > > # a full support for it yet.
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse bcm4359"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse bcm4359"
> > >
> > > KERNEL_DEVICETREE = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-ak5558.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-inmate.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-rm67191.dtb \
> > > @@ -22,8 +22,8 @@ KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > "
> > > UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
> > >
> > > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> > >
> > > UBOOT_SUFFIX = "bin"
> > >
> > > @@ -52,18 +52,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> > > # to be used to define the boot process.
> > > # We opt-in for Syslinux, since it is designated as a preferred
> > > # distro boot mode according to the U-Boot documentation.
> > > -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> > > -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> > > -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Nano EVK"
> > > +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> > > +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> > > +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Nano EVK"
> > >
> > > -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M
> > > Nano EVK"
> > > -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp =
> > > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > > -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp =
> > > "console=${console}"
> > > -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp =
> > > "root=/dev/mmcblk1p2"
> > > +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M
> > > Nano EVK"
> > > +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp =
> > > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > > +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp =
> > > "console=${console}"
> > > +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp =
> > > "root=/dev/mmcblk1p2"
> > >
> > > # Add extlinux.conf to the lis of files, which are deployed onto the
> > > # boot partition
> > > -IMAGE_BOOT_FILES_append_use-mainline-bsp = "
> > > extlinux.conf;extlinux/extlinux.conf"
> > > +IMAGE_BOOT_FILES:append:use-mainline-bsp = "
> > > extlinux.conf;extlinux/extlinux.conf"
> > >
> > > BOOT_SPACE = "65536"
> > > LOADADDR = ""
> > > @@ -79,4 +79,4 @@ OPTEE_BIN_EXT = "8mn"
> > > TEE_LOAD_ADDR = "0x56000000"
> > >
> > > # Add additional firmware
> > > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > > diff --git a/conf/machine/include/imx8mp-evk.inc
> > > b/conf/machine/include/imx8mp-evk.inc
> > > index d070831ff3d3..bc2c038f0076 100644
> > > --- a/conf/machine/include/imx8mp-evk.inc
> > > +++ b/conf/machine/include/imx8mp-evk.inc
> > > @@ -8,7 +8,7 @@ MACHINE_FEATURES += "pci wifi bluetooth"
> > > # NXP BSP can consume proprietary jailhouse and Marvell drivers
> > > # OP-TEE is also applicable to NXP BSP, mainline BSP seems not to
> > > have
> > > # a full support for it yet.
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " optee jailhouse mrvl8997"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " optee jailhouse mrvl8997"
> > >
> > > # Mainline kernel contains only one DTB file for
> > > # imx8mpevk machine
> > > @@ -18,8 +18,8 @@ KERNEL_DEVICETREE = " \
> > >
> > > UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
> > >
> > > -IMX_DEFAULT_BOOTLOADER_use-nxp-bsp = "u-boot-imx"
> > > -IMX_DEFAULT_BOOTLOADER_use-mainline-bsp = "u-boot-fslc"
> > > +IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
> > > +IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
> > >
> > > UBOOT_SUFFIX = "bin"
> > >
> > > @@ -50,18 +50,18 @@ SERIAL_CONSOLES = "115200;ttymxc1"
> > > # to be used to define the boot process.
> > > # We opt-in for Syslinux, since it is designated as a preferred
> > > # distro boot mode according to the U-Boot documentation.
> > > -UBOOT_EXTLINUX_use-mainline-bsp = "1"
> > > -UBOOT_EXTLINUX_LABELS_use-mainline-bsp = "default"
> > > -UBOOT_EXTLINUX_DEFAULT_LABEL_use-mainline-bsp = "i.MX8M Plus EVK"
> > > +UBOOT_EXTLINUX:use-mainline-bsp = "1"
> > > +UBOOT_EXTLINUX_LABELS:use-mainline-bsp = "default"
> > > +UBOOT_EXTLINUX_DEFAULT_LABEL:use-mainline-bsp = "i.MX8M Plus EVK"
> > >
> > > -UBOOT_EXTLINUX_MENU_DESCRIPTION_default_use-mainline-bsp = "i.MX8M
> > > Plus EVK"
> > > -UBOOT_EXTLINUX_FDT_default_use-mainline-bsp =
> > > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > > -UBOOT_EXTLINUX_CONSOLE_default_use-mainline-bsp =
> > > "console=${console}"
> > > -UBOOT_EXTLINUX_ROOT_default_use-mainline-bsp =
> > > "root=/dev/mmcblk1p2"
> > > +UBOOT_EXTLINUX_MENU_DESCRIPTION_default:use-mainline-bsp = "i.MX8M
> > > Plus EVK"
> > > +UBOOT_EXTLINUX_FDT_default:use-mainline-bsp =
> > > "../${KERNEL_DEVICETREE_BASENAME}.dtb"
> > > +UBOOT_EXTLINUX_CONSOLE_default:use-mainline-bsp =
> > > "console=${console}"
> > > +UBOOT_EXTLINUX_ROOT_default:use-mainline-bsp =
> > > "root=/dev/mmcblk1p2"
> > >
> > > # Add extlinux.conf to the lis of files, which are deployed onto the
> > > # boot partition
> > > -IMAGE_BOOT_FILES_append_use-mainline-bsp = "
> > > extlinux.conf;extlinux/extlinux.conf"
> > > +IMAGE_BOOT_FILES:append:use-mainline-bsp = "
> > > extlinux.conf;extlinux/extlinux.conf"
> > >
> > > LOADADDR = ""
> > > UBOOT_SUFFIX = "bin"
> > > @@ -72,4 +72,4 @@ OPTEE_BIN_EXT = "8mp"
> > > TEE_LOAD_ADDR = "0x56000000"
> > >
> > > # Add additional firmware
> > > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > > diff --git a/conf/machine/include/imx8x-mek.inc
> > > b/conf/machine/include/imx8x-mek.inc
> > > index 55a28c877e60..0682fbc1be21 100644
> > > --- a/conf/machine/include/imx8x-mek.inc
> > > +++ b/conf/machine/include/imx8x-mek.inc
> > > @@ -6,7 +6,7 @@ require conf/machine/include/tune-cortexa35.inc
> > > IMX_DEFAULT_BSP = "nxp"
> > >
> > > MACHINE_FEATURES += "pci optee bcm43455 bcm4356"
> > > -MACHINE_FEATURES_append_use-nxp-bsp = " bcm4359"
> > > +MACHINE_FEATURES:append:use-nxp-bsp = " bcm4359"
> > >
> > > # Don't include kernels in standard images
> > > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > > @@ -23,7 +23,7 @@ USE_VT = "0"
> > > KERNEL_DEVICETREE = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}.dtb \
> > > "
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = " \
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = " \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-dsi-rm67191-rpmsg.dtb \
> > > freescale/${KERNEL_DEVICETREE_BASENAME}-dsp.dtb \
> > > @@ -71,4 +71,4 @@ IMXBOOT_TARGETS = \
> > > BOARD_TYPE = "mek"
> > >
> > > # Add additional firmware
> > > -MACHINE_FIRMWARE_append = " linux-firmware-ath10k"
> > > +MACHINE_FIRMWARE:append = " linux-firmware-ath10k"
> > > diff --git a/conf/machine/include/qoriq-base.inc
> > > b/conf/machine/include/qoriq-base.inc
> > > index 0a42160f0f30..9bc3ee76c756 100644
> > > --- a/conf/machine/include/qoriq-base.inc
> > > +++ b/conf/machine/include/qoriq-base.inc
> > > @@ -9,8 +9,8 @@ PREFERRED_PROVIDER_nativesdk-u-boot-mkimage ??=
> > > "nativesdk-u-boot-tools"
> > > PREFERRED_VERSION_testfloat = "2a"
> > >
> > > SOC_DEFAULT_IMAGE_FSTYPES = "tar.gz"
> > > -SOC_DEFAULT_IMAGE_FSTYPES_append_ls1043a = " wic.bz2"
> > > -SOC_DEFAULT_IMAGE_FSTYPES_append_ls1046a = " wic.bz2"
> > > +SOC_DEFAULT_IMAGE_FSTYPES:append:ls1043a = " wic.bz2"
> > > +SOC_DEFAULT_IMAGE_FSTYPES:append:ls1046a = " wic.bz2"
> > > IMAGE_FSTYPES ?= "${SOC_DEFAULT_IMAGE_FSTYPES}"
> > >
> > > # Composite Image Layout (in KBytes)
> > > @@ -31,8 +31,8 @@ IMAGE_BOOT_FILES ?= " \
> > > "
> > >
> > > SOC_DEFAULT_WKS_FILE ?= ""
> > > -SOC_DEFAULT_WKS_FILE_ls1043a ?= "ls104x-uboot-bootpart.wks.in"
> > > -SOC_DEFAULT_WKS_FILE_ls1046a ?= "ls104x-uboot-bootpart.wks.in"
> > > +SOC_DEFAULT_WKS_FILE:ls1043a ?= "ls104x-uboot-bootpart.wks.in"
> > > +SOC_DEFAULT_WKS_FILE:ls1046a ?= "ls104x-uboot-bootpart.wks.in"
> > >
> > > WKS_FILE ?= "${SOC_DEFAULT_WKS_FILE}"
> > >
> > > diff --git a/conf/machine/include/utilities.inc
> > > b/conf/machine/include/utilities.inc
> > > index f11b588bbe5d..34ce7abcb6d7 100644
> > > --- a/conf/machine/include/utilities.inc
> > > +++ b/conf/machine/include/utilities.inc
> > > @@ -23,6 +23,6 @@ def make_dtb_boot_files(d):
> > >
> > > def get_spl_binary(d):
> > > imx_default_bootloader = d.get('IMX_DEFAULT_BOOTLOADER')
> > > - spl_binary = d.getVar("SPL_BINARY_pn-%s" %
> > > imx_default_bootloader)
> > > + spl_binary = d.getVar("SPL_BINARY:pn-%s" %
> > > imx_default_bootloader)
> > >
> > > return spl_binary or ""
> > > diff --git a/conf/machine/ls1028ardb.conf
> > > b/conf/machine/ls1028ardb.conf
> > > index 63f3802f7959..d70a5a619f9b 100644
> > > --- a/conf/machine/ls1028ardb.conf
> > > +++ b/conf/machine/ls1028ardb.conf
> > > @@ -22,7 +22,7 @@ UBOOT_CONFIG[tfa-secure-boot] =
> > > "ls1028ardb_tfa_SECURE_BOOT_defconfig"
> > > UBOOT_CONFIG[tfa] = "ls1028ardb_tfa_defconfig"
> > >
> > > KERNEL_DEVICETREE ?= "freescale/fsl-ls1028a-rdb.dtb freescale/fsl-
> > > ls1028a-qds.dtb"
> > > -KERNEL_DEVICETREE_append_use-nxp-bsp = "\
> > > +KERNEL_DEVICETREE:append:use-nxp-bsp = "\
> > > freescale/fsl-ls1028a-rdb-dpdk.dtb \
> > > "
> > > KERNEL_DEFCONFIG ?= "defconfig"
> > > diff --git a/conf/machine/ls1043ardb.conf
> > > b/conf/machine/ls1043ardb.conf
> > > index fa8ab61566c7..4ff3c0acb913 100644
> > > --- a/conf/machine/ls1043ardb.conf
> > > +++ b/conf/machine/ls1043ardb.conf
> > > @@ -27,7 +27,7 @@ KERNEL_DEVICETREE ?= "\
> > > freescale/fsl-ls1043a-qds.dtb \
> > > "
> > > # usdpaa dtb is used for dpdk. TODO: rename in kernel
> > > -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> > > +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> > > freescale/fsl-ls1043a-rdb-sdk.dtb \
> > > freescale/fsl-ls1043a-rdb-usdpaa.dtb \
> > > freescale/fsl-ls1043a-qds-sdk.dtb \
> > > diff --git a/conf/machine/ls1046afrwy.conf
> > > b/conf/machine/ls1046afrwy.conf
> > > index e6eabc0f36df..eb3c0bb6f4a5 100644
> > > --- a/conf/machine/ls1046afrwy.conf
> > > +++ b/conf/machine/ls1046afrwy.conf
> > > @@ -25,7 +25,7 @@ KERNEL_DEVICETREE ?= "\
> > > freescale/fsl-ls1046a-frwy.dtb \
> > > "
> > > # usdpaa dtb is used for dpdk. TODO: rename in kernel
> > > -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> > > +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> > > freescale/fsl-ls1046a-frwy-sdk.dtb \
> > > freescale/fsl-ls1046a-frwy-usdpaa.dtb \
> > > "
> > > diff --git a/conf/machine/ls1046ardb.conf
> > > b/conf/machine/ls1046ardb.conf
> > > index 97fb1e29e36a..8e815295ad4c 100644
> > > --- a/conf/machine/ls1046ardb.conf
> > > +++ b/conf/machine/ls1046ardb.conf
> > > @@ -26,7 +26,7 @@ KERNEL_DEVICETREE ?= "\
> > > freescale/fsl-ls1046a-qds.dtb \
> > > "
> > > # usdpaa dtb is used for dpdk. TODO: rename in kernel
> > > -KERNEL_DEVICETREE_prepend_use-nxp-bsp = "\
> > > +KERNEL_DEVICETREE:prepend:use-nxp-bsp = "\
> > > freescale/fsl-ls1046a-rdb-sdk.dtb \
> > > freescale/fsl-ls1046a-rdb-usdpaa.dtb \
> > > freescale/fsl-ls1046a-qds-sdk.dtb \
> > > diff --git a/dynamic-layers/aglprofilegraphical/recipes-
> > > graphics/wayland/weston-init.bbappend b/dynamic-
> > > layers/aglprofilegraphical/recipes-graphics/wayland/weston-
> > > init.bbappend
> > > index 10b66c0e4adc..b7bf3298f6ff 100644
> > > --- a/dynamic-layers/aglprofilegraphical/recipes-
> > > graphics/wayland/weston-init.bbappend
> > > +++ b/dynamic-layers/aglprofilegraphical/recipes-
> > > graphics/wayland/weston-init.bbappend
> > > @@ -1,3 +1,3 @@
> > > -do_install_append() {
> > > +do_install:append() {
> > > rm -f ${D}${sysconfdir}/xdg/weston/weston.ini
> > > }
> > > diff --git a/dynamic-layers/chromium-browser-layer/recipes-
> > > browser/chromium/chromium-imx.inc b/dynamic-layers/chromium-browser-
> > > layer/recipes-browser/chromium/chromium-imx.inc
> > > index cdd0f08fde77..7d8065f9db46 100644
> > > --- a/dynamic-layers/chromium-browser-layer/recipes-
> > > browser/chromium/chromium-imx.inc
> > > +++ b/dynamic-layers/chromium-browser-layer/recipes-
> > > browser/chromium/chromium-imx.inc
> > > @@ -1,4 +1,4 @@
> > > -DEPENDS_append_imxvpu = " imx-vpuwrap"
> > > +DEPENDS:append:imxvpu = " imx-vpuwrap"
> > >
> > > # Additional imx code and patches are included in the chromium-imx
> > > git repository.
> > > # The code below fetches this repository, copies the extra source
> > > over to the main
> > > @@ -26,7 +26,7 @@ do_patch[prefuncs] =+ "add_chromium_imx_patches"
> > > # * Lost context problems are not known to happen with Vivante GPUs,
> > > # so it is safe to use ignore-lost-context
> > > # * Proprietary codecs need to be enabled for h.264 and MP4 support
> > > -PACKAGECONFIG_append = " ignore-lost-context proprietary-codecs"
> > > +PACKAGECONFIG:append = " ignore-lost-context proprietary-codecs"
> > >
> > > copy_chromium_imx_files() {
> > > # sources in src/ are already organized in a manner
> > > diff --git a/dynamic-layers/gnome-layer/recipes-
> > > graphics/clutter/clutter-1.0_%.bbappend b/dynamic-layers/gnome-
> > > layer/recipes-graphics/clutter/clutter-1.0_%.bbappend
> > > index 0b4c4861b6e3..fb90c73e1d1f 100644
> > > --- a/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-
> > > 1.0_%.bbappend
> > > +++ b/dynamic-layers/gnome-layer/recipes-graphics/clutter/clutter-
> > > 1.0_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -PACKAGECONFIG_imxgpu3d ??= " \
> > > +PACKAGECONFIG:imxgpu3d ??= " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland
> > > egl', \
> > > bb.utils.contains('DISTRO_FEATURES', 'x11', 'glx x11', \
> > > '', d), d)} \
> > > diff --git a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-
> > > 1.0_%.bbappend b/dynamic-layers/gnome-layer/recipes-
> > > graphics/cogl/cogl-1.0_%.bbappend
> > > index afbaee4323ad..e07d0d54235a 100644
> > > --- a/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-
> > > 1.0_%.bbappend
> > > +++ b/dynamic-layers/gnome-layer/recipes-graphics/cogl/cogl-
> > > 1.0_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -PACKAGECONFIG_imxgpu3d ??= " \
> > > +PACKAGECONFIG:imxgpu3d ??= " \
> > > cogl-pango gles2 \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'egl-
> > > wayland', \
> > > bb.utils.contains('DISTRO_FEATURES', 'x11', 'egl-x11', \
> > > diff --git a/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > > init.bbappend b/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > > init.bbappend
> > > index 72d991c7e590..4fc41d058011 100644
> > > --- a/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > > init.bbappend
> > > +++ b/dynamic-layers/ivi/recipes-graphics/wayland/weston-
> > > init.bbappend
> > > @@ -1 +1 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > > benchmark/glmark2/glmark2_%.bbappend b/dynamic-layers/openembedded-
> > > layer/recipes-benchmark/glmark2/glmark2_%.bbappend
> > > index 2e648ba34914..06661133569f 100644
> > > --- a/dynamic-layers/openembedded-layer/recipes-
> > > benchmark/glmark2/glmark2_%.bbappend
> > > +++ b/dynamic-layers/openembedded-layer/recipes-
> > > benchmark/glmark2/glmark2_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -# Only _mx8 machine do provide virtual/libgbm required for any drm*
> > > flavour
> > > -DRM-REMOVE_imxgpu = "drm-gl drm-gles2"
> > > -DRM-REMOVE_imxgpu_mx8 = ""
> > > -PACKAGECONFIG_remove = "${DRM-REMOVE}"
> > > +# Only :mx8 machine do provide virtual/libgbm required for any drm*
> > > flavour
> > > +DRM-REMOVE:imxgpu = "drm-gl drm-gles2"
> > > +DRM-REMOVE:imxgpu:mx8 = ""
> > > +PACKAGECONFIG:remove = "${DRM-REMOVE}"
> > > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > > devtools/luajit/luajit_%.bbappend b/dynamic-layers/openembedded-
> > > layer/recipes-devtools/luajit/luajit_%.bbappend
> > > index 8c6138c54aae..d07f8ae14d2c 100644
> > > --- a/dynamic-layers/openembedded-layer/recipes-
> > > devtools/luajit/luajit_%.bbappend
> > > +++ b/dynamic-layers/openembedded-layer/recipes-
> > > devtools/luajit/luajit_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > >
> > > -SRC_URI_append_qoriq-ppc = " file://ppc-fixplt.patch "
> > > +SRC_URI:append:qoriq-ppc = " file://ppc-fixplt.patch "
> > >
> > > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > > dpaa/fmc/fmc_git.bb b/dynamic-layers/openembedded-layer/recipes-
> > > dpaa/fmc/fmc_git.bb
> > > index 1793ec06fb4e..9c6be782d6d0 100644
> > > --- a/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> > > +++ b/dynamic-layers/openembedded-layer/recipes-dpaa/fmc/fmc_git.bb
> > > @@ -19,15 +19,15 @@ EXTRA_OEMAKE_virtclass-native = 'FMCHOSTMODE=1
> > > FMD_USPACE_HEADER_PATH="${STAGING
> > > TCLAP_HEADER_PATH="${STAGING_INCDIR}" '
> > >
> > > EXTRA_OEMAKE_PLATFORM ?= ""
> > > -EXTRA_OEMAKE_PLATFORM_ls1043a = "ls1043"
> > > -EXTRA_OEMAKE_PLATFORM_ls1046a = "ls1046"
> > > -EXTRA_OEMAKE_PLATFORM_ls1088a = "ls1088"
> > > -EXTRA_OEMAKE_PLATFORM_p1020 = "p4080ds"
> > > -EXTRA_OEMAKE_PLATFORM_p2020 = "p4080ds"
> > > -EXTRA_OEMAKE_PLATFORM_p2041 = "p4080ds"
> > > -EXTRA_OEMAKE_PLATFORM_p3041 = "p4080ds"
> > > -EXTRA_OEMAKE_PLATFORM_p4080 = "p4080ds"
> > > -EXTRA_OEMAKE_PLATFORM_p5040 = "p4080ds"
> > > +EXTRA_OEMAKE_PLATFORM:ls1043a = "ls1043"
> > > +EXTRA_OEMAKE_PLATFORM:ls1046a = "ls1046"
> > > +EXTRA_OEMAKE_PLATFORM:ls1088a = "ls1088"
> > > +EXTRA_OEMAKE_PLATFORM:p1020 = "p4080ds"
> > > +EXTRA_OEMAKE_PLATFORM:p2020 = "p4080ds"
> > > +EXTRA_OEMAKE_PLATFORM:p2041 = "p4080ds"
> > > +EXTRA_OEMAKE_PLATFORM:p3041 = "p4080ds"
> > > +EXTRA_OEMAKE_PLATFORM:p4080 = "p4080ds"
> > > +EXTRA_OEMAKE_PLATFORM:p5040 = "p4080ds"
> > >
> > >
> > > do_compile () {
> > > diff --git a/dynamic-layers/openembedded-layer/recipes-
> > > graphics/xserver-common/xserver-common_%.bbappend b/dynamic-
> > > layers/openembedded-layer/recipes-graphics/xserver-common/xserver-
> > > common_%.bbappend
> > > index f4f4350489cf..be6945744efa 100644
> > > --- a/dynamic-layers/openembedded-layer/recipes-graphics/xserver-
> > > common/xserver-common_%.bbappend
> > > +++ b/dynamic-layers/openembedded-layer/recipes-graphics/xserver-
> > > common/xserver-common_%.bbappend
> > > @@ -1,8 +1,8 @@
> > > # i.MX extra configuration
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > >
> > > -SRC_URI_append_imxgpu3d = " \
> > > +SRC_URI:append:imxgpu3d = " \
> > > file://0016-xserver-common-enable-iglx-module.patch \
> > > "
> > >
> > > -PACKAGE_ARCH_imxgpu3d = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:imxgpu3d = "${MACHINE_SOCARCH}"
> > > diff --git a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-
> > > support.inc b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-
> > > support.inc
> > > index 187681a8b123..8950c151bd77 100644
> > > --- a/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> > > +++ b/dynamic-layers/qt4-layer/recipes-qt4/qt4/qt4-imx-support.inc
> > > @@ -1,4 +1,4 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/qt4:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/qt4:"
> > >
> > > python __anonymous () {
> > > families = ['mx6']
> > > @@ -8,21 +8,21 @@ python __anonymous () {
> > > d.appendVarFlag('do_configure', 'depends', '
> > > virtual/kernel:do_shared_workdir')
> > > }
> > >
> > > -SRC_URI_append_imxgpu2d += " \
> > > +SRC_URI:append:imxgpu2d += " \
> > > file://0001-Add-support-for-i.MX-codecs-to-phonon.patch \
> > >
> > > file://0002-i.MX-video-renderer-Allow-v4l-device-from-environmen.patch
> > > \
> > > file://0003-i.MX6-force-egl-visual-ID-33.patch \
> > > "
> > >
> > > -DEPENDS_append_imxgpu2d = " virtual/kernel virtual/libgles2"
> > > -QT_GLFLAGS_imxgpu2d = "-opengl es2 -openvg"
> > > -QT_CONFIG_FLAGS_append_imxgpu2d = " -
> > > I${STAGING_KERNEL_DIR}/include/uapi \
> > > +DEPENDS:append:imxgpu2d = " virtual/kernel virtual/libgles2"
> > > +QT_GLFLAGS:imxgpu2d = "-opengl es2 -openvg"
> > > +QT_CONFIG_FLAGS:append:imxgpu2d = " -
> > > I${STAGING_KERNEL_DIR}/include/uapi \
> > > -I${STAGING_KERNEL_DIR}/include/ \
> > > -DLINUX=1 -DEGL_API_FB=1 \
> > > -DQT_QPA_EXPERIMENTAL_TOUCHEVENT=1"
> > >
> > > # The QT_CONFIG_FLAGS can pollute *.la files with -Dxxx
> > > -do_compile_append_mx6 () {
> > > +do_compile:append:mx6 () {
> > > find lib -name "*.la" | xargs -n1 sed -i 's/-D.*=1//g'
> > > }
> > >
> > > diff --git a/dynamic-layers/qt5-layer/recipes-
> > > qt/qt5/qtbase_%.bbappend b/dynamic-layers/qt5-layer/recipes-
> > > qt/qt5/qtbase_%.bbappend
> > > index bf3fb66eeb72..0d5897adc7f9 100644
> > > --- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> > > +++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtbase_%.bbappend
> > > @@ -3,35 +3,35 @@
> > > # Copyright (C) 2016, 2017 O.S. Systems Software LTDA.
> > > # Copyright (C) 2017-2018 NXP
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > >
> > > -SRC_URI_append_imxgpu = " \
> > > +SRC_URI:append:imxgpu = " \
> > > file://0014-Add-IMX-GPU-support.patch \
> > >
> > > file://0001-egl.prf-Fix-build-error-when-egl-headers-need-platfo.patch
> > > \
> > > "
> > >
> > > PACKAGECONFIG_GL_IMX_GPU = ""
> > > -PACKAGECONFIG_GL_IMX_GPU_mx8 = "gbm kms"
> > > +PACKAGECONFIG_GL_IMX_GPU:mx8 = "gbm kms"
> > >
> > > -PACKAGECONFIG_GL_imxpxp = "gles2"
> > > -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'x11', ' gl', '', d)} \
> > > +PACKAGECONFIG_GL:imxpxp = "gles2"
> > > +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'x11', ' gl', '', d)} \
> > > ${PACKAGECONFIG_GL_IMX_GPU}"
> > > -PACKAGECONFIG_GL_imxgpu3d = "gles2 \
> > > +PACKAGECONFIG_GL:imxgpu3d = "gles2 \
> > > ${PACKAGECONFIG_GL_IMX_GPU}"
> > > -PACKAGECONFIG_GL_use-mainline-bsp ?= "gles2 gbm kms"
> > > +PACKAGECONFIG_GL:use-mainline-bsp ?= "gles2 gbm kms"
> > >
> > > PACKAGECONFIG_PLATFORM = ""
> > > -PACKAGECONFIG_PLATFORM_imxgpu2d = "no-opengl linuxfb"
> > > -PACKAGECONFIG_PLATFORM_imxgpu3d = " \
> > > +PACKAGECONFIG_PLATFORM:imxgpu2d = "no-opengl linuxfb"
> > > +PACKAGECONFIG_PLATFORM:imxgpu3d = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', \
> > > bb.utils.contains('DISTRO_FEATURES', 'wayland', '', \
> > > 'eglfs', d),
> > > d)}"
> > > -PACKAGECONFIG_PLATFORM_use-mainline-bsp =
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
> > > +PACKAGECONFIG_PLATFORM:use-mainline-bsp =
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', 'eglfs', d)}"
> > > PACKAGECONFIG += "${PACKAGECONFIG_PLATFORM}"
> > >
> > > PACKAGECONFIG_VULKAN_IMX_GPU = ""
> > > -PACKAGECONFIG_VULKAN_IMX_GPU_mx8 = "vulkan"
> > > -PACKAGECONFIG_VULKAN_IMX_GPU_mx8mm = ""
> > > +PACKAGECONFIG_VULKAN_IMX_GPU:mx8 = "vulkan"
> > > +PACKAGECONFIG_VULKAN_IMX_GPU:mx8mm = ""
> > > PACKAGECONFIG_VULKAN = ""
> > > -PACKAGECONFIG_VULKAN_imxgpu =
> > > "${PACKAGECONFIG_VULKAN_IMX_GPU}"
> > > +PACKAGECONFIG_VULKAN:imxgpu =
> > > "${PACKAGECONFIG_VULKAN_IMX_GPU}"
> > > PACKAGECONFIG += "${@bb.utils.contains('DISTRO_FEATURES', 'vulkan',
> > > '${PACKAGECONFIG_VULKAN}', '', d)}"
> > > diff --git a/dynamic-layers/qt5-layer/recipes-
> > > qt/qt5/qtwayland_%.bbappend b/dynamic-layers/qt5-layer/recipes-
> > > qt/qt5/qtwayland_%.bbappend
> > > index 168db09548ab..c1594e0571b4 100644
> > > --- a/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> > > +++ b/dynamic-layers/qt5-layer/recipes-qt/qt5/qtwayland_%.bbappend
> > > @@ -1,8 +1,8 @@
> > > # etnaviv mesa does not have glx
> > > -PACKAGECONFIG_remove_use-mainline-bsp = "xcomposite-glx"
> > > +PACKAGECONFIG:remove:use-mainline-bsp = "xcomposite-glx"
> > >
> > > -PACKAGECONFIG_remove_mx6 = "xcomposite-egl xcomposite-glx"
> > > -PACKAGECONFIG_remove_mx7 = "xcomposite-egl xcomposite-glx"
> > > +PACKAGECONFIG:remove:mx6 = "xcomposite-egl xcomposite-glx"
> > > +PACKAGECONFIG:remove:mx7 = "xcomposite-egl xcomposite-glx"
> > >
> > > # i.MX8 does never provide native x11, so required dependencies are
> > > not met
> > > -PACKAGECONFIG_remove_mx8 = "xcomposite-egl xcomposite-glx"
> > > +PACKAGECONFIG:remove:mx8 = "xcomposite-egl xcomposite-glx"
> > > diff --git a/dynamic-layers/virtualization-layer/recipes-
> > > extended/libvirt/libvirt_%.bbappend b/dynamic-layers/virtualization-
> > > layer/recipes-extended/libvirt/libvirt_%.bbappend
> > > index c7e6d32e4213..7aecf1e466c6 100644
> > > --- a/dynamic-layers/virtualization-layer/recipes-
> > > extended/libvirt/libvirt_%.bbappend
> > > +++ b/dynamic-layers/virtualization-layer/recipes-
> > > extended/libvirt/libvirt_%.bbappend
> > > @@ -1,9 +1,9 @@
> > > PACKAGECONFIG_qoriq-ppc = "qemu yajl lxc test remote macvtap
> > > libvirtd netcf udev python"
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > > -SRC_URI_append_qoriq-ppc = " file://qemu.conf"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > > +SRC_URI:append:qoriq-ppc = " file://qemu.conf"
> > >
> > > -do_install_append_qoriq-ppc() {
> > > +do_install:append:qoriq-ppc() {
> > > install -m 0644 ${WORKDIR}/qemu.conf
> > > ${D}${sysconfdir}/libvirt/qemu.conf
> > > }
> > >
> > > diff --git a/recipes-bsp/alsa-state/alsa-state.bbappend b/recipes-
> > > bsp/alsa-state/alsa-state.bbappend
> > > index 3a398b2210fc..9433130725d5 100644
> > > --- a/recipes-bsp/alsa-state/alsa-state.bbappend
> > > +++ b/recipes-bsp/alsa-state/alsa-state.bbappend
> > > @@ -1,10 +1,10 @@
> > > # Append path for freescale layer to include alsa-state asound.conf
> > > -FILESEXTRAPATHS_prepend_mx6 := "${THISDIR}/${PN}/imx:"
> > > -FILESEXTRAPATHS_prepend_mx7 := "${THISDIR}/${PN}/imx:"
> > > -FILESEXTRAPATHS_prepend_mx8 := "${THISDIR}/${PN}/imx:"
> > > -FILESEXTRAPATHS_prepend_use-mainline-bsp := "${THISDIR}/${PN}/imx:"
> > > +FILESEXTRAPATHS:prepend:mx6 := "${THISDIR}/${PN}/imx:"
> > > +FILESEXTRAPATHS:prepend:mx7 := "${THISDIR}/${PN}/imx:"
> > > +FILESEXTRAPATHS:prepend:mx8 := "${THISDIR}/${PN}/imx:"
> > > +FILESEXTRAPATHS:prepend:use-mainline-bsp := "${THISDIR}/${PN}/imx:"
> > >
> > > -PACKAGE_ARCH_mx6 = "${MACHINE_ARCH}"
> > > -PACKAGE_ARCH_mx7 = "${MACHINE_ARCH}"
> > > -PACKAGE_ARCH_mx8 = "${MACHINE_ARCH}"
> > > -PACKAGE_ARCH_use-mainline-bsp = "${MACHINE_ARCH}"
> > > +PACKAGE_ARCH:mx6 = "${MACHINE_ARCH}"
> > > +PACKAGE_ARCH:mx7 = "${MACHINE_ARCH}"
> > > +PACKAGE_ARCH:mx8 = "${MACHINE_ARCH}"
> > > +PACKAGE_ARCH:use-mainline-bsp = "${MACHINE_ARCH}"
> > > diff --git a/recipes-bsp/atf/qoriq-atf_1.5.bb b/recipes-
> > > bsp/atf/qoriq-atf_1.5.bb
> > > index 192083348ea9..b03a6bcb95f5 100644
> > > --- a/recipes-bsp/atf/qoriq-atf_1.5.bb
> > > +++ b/recipes-bsp/atf/qoriq-atf_1.5.bb
> > > @@ -8,7 +8,7 @@ PV = "1.5+git${SRCPV}"
> > > inherit deploy
> > >
> > > DEPENDS += "u-boot-mkimage-native u-boot openssl openssl-native
> > > mbedtls rcw cst-native"
> > > -DEPENDS_append_lx2160a = " ddr-phy"
> > > +DEPENDS:append:lx2160a = " ddr-phy"
> > > do_compile[depends] += "u-boot:do_deploy rcw:do_deploy
> > > uefi:do_deploy"
> > >
> > > S = "${WORKDIR}/git"
> > > @@ -21,12 +21,12 @@ COMPATIBLE_MACHINE = "(qoriq)"
> > > PACKAGE_ARCH = "${MACHINE_ARCH}"
> > >
> > > PLATFORM = "${MACHINE}"
> > > -PLATFORM_ls1088ardb-pb = "ls1088ardb"
> > > +PLATFORM:ls1088ardb-pb = "ls1088ardb"
> > > PLATFORM_ADDITIONAL_TARGET ??= ""
> > > -PLATFORM_ADDITIONAL_TARGET_ls1012afrwy = "ls1012afrwy_512mb"
> > > +PLATFORM_ADDITIONAL_TARGET:ls1012afrwy = "ls1012afrwy_512mb"
> > >
> > > RCW_FOLDER ?= "${MACHINE}"
> > > -RCW_FOLDER_ls1088ardb-pb = "ls1088ardb"
> > > +RCW_FOLDER:ls1088ardb-pb = "ls1088ardb"
> > >
> > > # requires CROSS_COMPILE set by hand as there is no configure script
> > > export CROSS_COMPILE="${TARGET_PREFIX}"
> > > @@ -56,16 +56,16 @@ PACKAGECONFIG[optee] = ",,optee-os-qoriq"
> > > uboot_boot_sec ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa-secure-boot"
> > > uboot_boot ?= "${DEPLOY_DIR_IMAGE}/u-boot.bin-tfa"
> > > rcw ?= ""
> > > -rcw_ls1012a = "_default"
> > > +rcw:ls1012a = "_default"
> > > rcwsec ?= "_sben"
> > >
> > > chassistype ?= "ls2088_1088"
> > > -chassistype_ls1012a = "ls104x_1012"
> > > -chassistype_ls1043a = "ls104x_1012"
> > > -chassistype_ls1046a = "ls104x_1012"
> > > +chassistype:ls1012a = "ls104x_1012"
> > > +chassistype:ls1043a = "ls104x_1012"
> > > +chassistype:ls1046a = "ls104x_1012"
> > >
> > > ddrphyopt ?= ""
> > > -ddrphyopt_lx2160a = "fip_ddr_sec"
> > > +ddrphyopt:lx2160a = "fip_ddr_sec"
> > >
> > > do_configure[noexec] = "1"
> > >
> > > diff --git a/recipes-bsp/atf/qoriq-atf_2.3.bb b/recipes-
> > > bsp/atf/qoriq-atf_2.3.bb
> > > index aed32851bc42..2698bd32a99c 100644
> > > --- a/recipes-bsp/atf/qoriq-atf_2.3.bb
> > > +++ b/recipes-bsp/atf/qoriq-atf_2.3.bb
> > > @@ -47,7 +47,7 @@ do_compile() {
> > > if [ "${NXP_COT}" = "true" -a "${ARM_COT}" = "true" ]; then
> > > bbfatal " \
> > > Error!, Both ARM CoT and NXP CoT are enabled. Only one CoT
> > > is built in a yocto build, \
> > > - Don't add nxp-cot and arm-cot into DISTRO_FEATURES_append at
> > > the same time."
> > > + Don't add nxp-cot and arm-cot into DISTRO_FEATURES:append at
> > > the same time."
> > > fi
> > >
> > > if [ "${NXP_COT}" = "true" ]; then
> > > diff --git a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > > b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > > index 650c1cfded61..6ea16d5be67a 100644
> > > --- a/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > > +++ b/recipes-bsp/firmware-imx/firmware-imx-8_8.12.bb
> > > @@ -19,5 +19,5 @@ addtask deploy after do_install before do_build
> > > PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> > >
> > > COMPATIBLE_MACHINE = "(mx8)"
> > > -COMPATIBLE_MACHINE_mx8m = "(^$)"
> > > -COMPATIBLE_MACHINE_mx8x = "(^$)"
> > > +COMPATIBLE_MACHINE:mx8m = "(^$)"
> > > +COMPATIBLE_MACHINE:mx8x = "(^$)"
> > > diff --git a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb b/recipes-
> > > bsp/firmware-imx/firmware-imx_8.12.bb
> > > index 8ff4a3216060..34040b287de7 100644
> > > --- a/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> > > +++ b/recipes-bsp/firmware-imx/firmware-imx_8.12.bb
> > > @@ -65,7 +65,7 @@ do_install() {
> > > # as second one, and for every file match - it creates a separate
> > > package,
> > > # which contains only files that matches the pattern.
> > > #
> > > -python populate_packages_prepend() {
> > > +python populate_packages:prepend() {
> > > easrcdir =
> > > bb.data.expand('${nonarch_base_libdir}/firmware/imx/easrc', d)
> > > do_split_packages(d, easrcdir, '^easrc-([^_]*).*\.bin',
> > > output_pattern='firmware-imx-easrc-%s',
> > > diff --git a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb b/recipes-
> > > bsp/firmware-qca/qca-tools_3.0.2.bb
> > > index e996c62de957..fd0c2e742265 100644
> > > --- a/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> > > +++ b/recipes-bsp/firmware-qca/qca-tools_3.0.2.bb
> > > @@ -9,7 +9,7 @@ LICENSE = "Proprietary"
> > > DEPENDS = "libnl zlib"
> > >
> > > FCC_TOOLS_FOLDER ?= "qca9377_qca6174_arm32"
> > > -FCC_TOOLS_FOLDER_aarch64 = "qca9377_qca6174_arm64"
> > > +FCC_TOOLS_FOLDER:aarch64 = "qca9377_qca6174_arm64"
> > >
> > > do_install() {
> > > install -d ${D}${sbindir}/fcc_tools
> > > @@ -17,4 +17,4 @@ do_install() {
> > > }
> > >
> > > COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> > > -COMPATIBLE_HOST_libc-musl = 'null'
> > > +COMPATIBLE_HOST:libc-musl = 'null'
> > > diff --git a/recipes-bsp/formfactor/formfactor_%.bbappend b/recipes-
> > > bsp/formfactor/formfactor_%.bbappend
> > > index 15f8f4e8c2d4..83cce1310fbb 100644
> > > --- a/recipes-bsp/formfactor/formfactor_%.bbappend
> > > +++ b/recipes-bsp/formfactor/formfactor_%.bbappend
> > > @@ -1,2 +1,2 @@
> > > # Append path for i.MX custom matchconfig
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > > diff --git a/recipes-bsp/imx-atf/imx-atf_2.4.bb b/recipes-bsp/imx-
> > > atf/imx-atf_2.4.bb
> > > index f4db002be302..536a0a737cab 100644
> > > --- a/recipes-bsp/imx-atf/imx-atf_2.4.bb
> > > +++ b/recipes-bsp/imx-atf/imx-atf_2.4.bb
> > > @@ -27,7 +27,7 @@ EXTRA_OEMAKE += " \
> > >
> > > BUILD_OPTEE = "${@bb.utils.contains('MACHINE_FEATURES', 'optee',
> > > 'true', 'false', d)}"
> > >
> > > -CFLAGS_remove_mx8mq = "-O2"
> > > +CFLAGS:remove:mx8mq = "-O2"
> > >
> > > do_compile() {
> > > # Clear LDFLAGS to avoid the option -Wl recognize issue
> > > diff --git a/recipes-bsp/imx-lib/imx-lib_git.bb b/recipes-bsp/imx-
> > > lib/imx-lib_git.bb
> > > index c56190702be9..a296b185da94 100644
> > > --- a/recipes-bsp/imx-lib/imx-lib_git.bb
> > > +++ b/recipes-bsp/imx-lib/imx-lib_git.bb
> > > @@ -20,15 +20,15 @@ S = "${WORKDIR}/git"
> > >
> > > inherit use-imx-headers
> > >
> > > -PLATFORM_mx6q = "IMX6Q"
> > > -PLATFORM_mx6dl = "IMX6Q"
> > > -PLATFORM_mx6sl = "IMX6S"
> > > -PLATFORM_mx6sll = "IMX6UL"
> > > -PLATFORM_mx6sx = "IMX6S"
> > > -PLATFORM_mx6ul = "IMX6UL"
> > > -PLATFORM_mx6ull = "IMX6UL"
> > > -PLATFORM_mx7d = "IMX7"
> > > -PLATFORM_mx7ulp = "IMX7"
> > > +PLATFORM:mx6q = "IMX6Q"
> > > +PLATFORM:mx6dl = "IMX6Q"
> > > +PLATFORM:mx6sl = "IMX6S"
> > > +PLATFORM:mx6sll = "IMX6UL"
> > > +PLATFORM:mx6sx = "IMX6S"
> > > +PLATFORM:mx6ul = "IMX6UL"
> > > +PLATFORM:mx6ull = "IMX6UL"
> > > +PLATFORM:mx7d = "IMX7"
> > > +PLATFORM:mx7ulp = "IMX7"
> > >
> > > PARALLEL_MAKE="-j 1"
> > > EXTRA_OEMAKE = ""
> > > diff --git a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb b/recipes-
> > > bsp/imx-mkimage/imx-boot_1.0.bb
> > > index 422670bed322..484db354a75b 100644
> > > --- a/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> > > +++ b/recipes-bsp/imx-mkimage/imx-boot_1.0.bb
> > > @@ -10,8 +10,8 @@ SECTION = "BSP"
> > > inherit use-imx-security-controller-firmware
> > >
> > > IMX_EXTRA_FIRMWARE = "firmware-imx-8 imx-sc-firmware imx-seco"
> > > -IMX_EXTRA_FIRMWARE_mx8m = "firmware-imx-8m"
> > > -IMX_EXTRA_FIRMWARE_mx8x = "imx-sc-firmware imx-seco"
> > > +IMX_EXTRA_FIRMWARE:mx8m = "firmware-imx-8m"
> > > +IMX_EXTRA_FIRMWARE:mx8x = "imx-sc-firmware imx-seco"
> > > DEPENDS += " \
> > > u-boot \
> > > ${IMX_EXTRA_FIRMWARE} \
> > > @@ -20,7 +20,7 @@ DEPENDS += " \
> > > "
> > > # xxd is a dependency of fspi_packer.sh
> > > DEPENDS += "xxd-native"
> > > -DEPENDS_append_mx8m = " u-boot-mkimage-native dtc-native"
> > > +DEPENDS:append:mx8m = " u-boot-mkimage-native dtc-native"
> > > BOOT_NAME = "imx-boot"
> > > PROVIDES = "${BOOT_NAME}"
> > >
> > > @@ -41,7 +41,7 @@ do_compile[depends] += " \
> > > SC_FIRMWARE_NAME ?= "scfw_tcm.bin"
> > >
> > > ATF_MACHINE_NAME ?= "bl31-${ATF_PLATFORM}.bin"
> > > -ATF_MACHINE_NAME_append = "${@bb.utils.contains('MACHINE_FEATURES',
> > > 'optee', '-optee', '', d)}"
> > > +ATF_MACHINE_NAME:append = "${@bb.utils.contains('MACHINE_FEATURES',
> > > 'optee', '-optee', '', d)}"
> > >
> > > UBOOT_NAME = "u-boot-${MACHINE}.bin-${UBOOT_CONFIG}"
> > > BOOT_CONFIG_MACHINE = "${BOOT_NAME}-${MACHINE}-${UBOOT_CONFIG}.bin"
> > > @@ -58,20 +58,20 @@ IMXBOOT_TARGETS ?= \
> > > 'flash_multi_cores
> > > flash_dcd', d), d)}"
> > >
> > > BOOT_STAGING = "${S}/${IMX_BOOT_SOC_TARGET}"
> > > -BOOT_STAGING_mx8m = "${S}/iMX8M"
> > > -BOOT_STAGING_mx8dx = "${S}/iMX8QX"
> > > +BOOT_STAGING:mx8m = "${S}/iMX8M"
> > > +BOOT_STAGING:mx8dx = "${S}/iMX8QX"
> > >
> > > SOC_FAMILY = "INVALID"
> > > -SOC_FAMILY_mx8 = "mx8"
> > > -SOC_FAMILY_mx8m = "mx8m"
> > > -SOC_FAMILY_mx8x = "mx8x"
> > > +SOC_FAMILY:mx8 = "mx8"
> > > +SOC_FAMILY:mx8m = "mx8m"
> > > +SOC_FAMILY:mx8x = "mx8x"
> > >
> > > REV_OPTION ?= ""
> > > -REV_OPTION_mx8qxp = \
> > > +REV_OPTION:mx8qxp = \
> > > "${@bb.utils.contains('MACHINE_FEATURES', 'soc-revb0', '', \
> > > 'REV=C0',
> > > d)}"
> > >
> > > -compile_mx8m() {
> > > +compile:mx8m() {
> > > bbnote 8MQ/8MM/8MN/8MP boot binary build
> > > for ddr_firmware in ${DDR_FIRMWARE_NAME}; do
> > > bbnote "Copy ddr_firmware: ${ddr_firmware} from
> > > ${DEPLOY_DIR_IMAGE} -> ${BOOT_STAGING} "
> > > @@ -88,7 +88,7 @@ compile_mx8m() {
> > > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME}
> > > ${BOOT_STAGING}/bl31.bin
> > > cp ${DEPLOY_DIR_IMAGE}/${UBOOT_NAME}
> > > ${BOOT_STAGING}/u-boot.bin
> > > }
> > > -compile_mx8() {
> > > +compile:mx8() {
> > > bbnote 8QM boot binary build
> > > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME}
> > > ${BOOT_STAGING}/scfw_tcm.bin
> > > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${ATF_MACHINE_NAME}
> > > ${BOOT_STAGING}/bl31.bin
> > > @@ -100,7 +100,7 @@ compile_mx8() {
> > > fi
> > > }
> > >
> > > -compile_mx8x() {
> > > +compile:mx8x() {
> > > bbnote 8QX boot binary build
> > > cp ${DEPLOY_DIR_IMAGE}/${SECO_FIRMWARE_NAME}
> > > ${BOOT_STAGING}
> > > cp ${DEPLOY_DIR_IMAGE}/${BOOT_TOOLS}/${SC_FIRMWARE_NAME}
> > > ${BOOT_STAGING}/scfw_tcm.bin
> > > @@ -140,7 +140,7 @@ do_install () {
> > > done
> > > }
> > >
> > > -deploy_mx8m() {
> > > +deploy:mx8m() {
> > > install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> > > install -m 0644 ${DEPLOY_DIR_IMAGE}/u-boot-spl.bin-${MACHINE}-
> > > ${UBOOT_CONFIG} \
> > >
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > @@ -153,7 +153,7 @@ deploy_mx8m() {
> > > install -m 0755 ${BOOT_STAGING}/mkimage_fit_atf.sh
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > install -m 0755 ${BOOT_STAGING}/mkimage_uboot
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > }
> > > -deploy_mx8() {
> > > +deploy:mx8() {
> > > install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> > > install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME}
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > install -m 0755 ${S}/${TOOLS_NAME}
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > @@ -162,7 +162,7 @@ deploy_mx8() {
> > >
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > fi
> > > }
> > > -deploy_mx8x() {
> > > +deploy:mx8x() {
> > > install -d ${DEPLOYDIR}/${BOOT_TOOLS}
> > > install -m 0644 ${BOOT_STAGING}/${SECO_FIRMWARE_NAME}
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > install -m 0755 ${S}/${TOOLS_NAME}
> > > ${DEPLOYDIR}/${BOOT_TOOLS}
> > > diff --git a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb b/recipes-
> > > bsp/imx-mkimage/imx-mkimage_git.bb
> > > index f9943342962e..90e3ebf13ce7 100644
> > > --- a/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> > > +++ b/recipes-bsp/imx-mkimage/imx-mkimage_git.bb
> > > @@ -16,12 +16,12 @@ do_compile () {
> > > cd ${S}
> > > oe_runmake clean
> > > oe_runmake bin
> > > - oe_runmake -C iMX8M -f soc.mak mkimage_imx8
> > > + oe_runmake -C iMX8M -f soc.mak mkimage:imx8
> > > }
> > >
> > > do_install () {
> > > cd ${S}
> > > install -d ${D}${bindir}
> > > - install -m 0755 iMX8M/mkimage_imx8 ${D}${bindir}/mkimage_imx8m
> > > - install -m 0755 mkimage_imx8 ${D}${bindir}/mkimage_imx8
> > > + install -m 0755 iMX8M/mkimage:imx8 ${D}${bindir}/mkimage_imx8m
> > > + install -m 0755 mkimage:imx8 ${D}${bindir}/mkimage_imx8
> > > }
> > > diff --git a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > > b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > > index b8c3d3c3cf4f..6eb65b811aa2 100644
> > > --- a/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > > +++ b/recipes-bsp/imx-sc-firmware/imx-sc-firmware_1.9.0.bb
> > > @@ -15,10 +15,10 @@ SRC_URI[sha256sum] =
> > > "df0fe17c93e4c2835542d6b1b2557524f034e378b643100cd838225e82
> > >
> > > BOARD_TYPE ?= "mek"
> > > SC_FIRMWARE_NAME ?= "INVALID"
> > > -SC_FIRMWARE_NAME_mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
> > > -SC_FIRMWARE_NAME_mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
> > > -SC_FIRMWARE_NAME_mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
> > > -SC_FIRMWARE_NAME_mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
> > > +SC_FIRMWARE_NAME:mx8qm = "mx8qm-${BOARD_TYPE}-scfw-tcm.bin"
> > > +SC_FIRMWARE_NAME:mx8qxp = "mx8qx-${BOARD_TYPE}-scfw-tcm.bin"
> > > +SC_FIRMWARE_NAME:mx8dxl = "mx8dxl-${BOARD_TYPE}-scfw-tcm.bin"
> > > +SC_FIRMWARE_NAME:mx8dx = "mx8dx-${BOARD_TYPE}-scfw-tcm.bin"
> > >
> > > symlink_name = "scfw_tcm.bin"
> > >
> > > diff --git a/recipes-bsp/imx-test/imx-test_git.bb b/recipes-bsp/imx-
> > > test/imx-test_git.bb
> > > index 118590d5a93b..ad072c5f4d71 100644
> > > --- a/recipes-bsp/imx-test/imx-test_git.bb
> > > +++ b/recipes-bsp/imx-test/imx-test_git.bb
> > > @@ -9,9 +9,9 @@ LICENSE = "GPLv2+"
> > > LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-
> > > licenses/GPL-2.0-or-later;md5=fed54355545ffd980b814dab4a3b312c"
> > >
> > > DEPENDS = "alsa-lib libdrm"
> > > -DEPENDS_append_mx6 = " imx-lib"
> > > -DEPENDS_append_mx7 = " imx-lib"
> > > -DEPENDS_append_imxvpu = " virtual/imxvpu"
> > > +DEPENDS:append:mx6 = " imx-lib"
> > > +DEPENDS:append:mx7 = " imx-lib"
> > > +DEPENDS:append:imxvpu = " virtual/imxvpu"
> > >
> > > PE = "1"
> > > PV = "7.0+${SRCPV}"
> > > @@ -29,22 +29,22 @@ inherit module-base use-imx-headers
> > > INHIBIT_PACKAGE_STRIP = "1"
> > > INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
> > >
> > > -PLATFORM_mx6q = "IMX6Q"
> > > -PLATFORM_mx6dl = "IMX6Q"
> > > -PLATFORM_mx6sl = "IMX6SL"
> > > -PLATFORM_mx6sll = "IMX6SL"
> > > -PLATFORM_mx6sx = "IMX6SX"
> > > -PLATFORM_mx6ul = "IMX6UL"
> > > -PLATFORM_mx7d = "IMX7D"
> > > -PLATFORM_mx7ulp = "IMX7D"
> > > -PLATFORM_mx8 = "IMX8"
> > > +PLATFORM:mx6q = "IMX6Q"
> > > +PLATFORM:mx6dl = "IMX6Q"
> > > +PLATFORM:mx6sl = "IMX6SL"
> > > +PLATFORM:mx6sll = "IMX6SL"
> > > +PLATFORM:mx6sx = "IMX6SX"
> > > +PLATFORM:mx6ul = "IMX6UL"
> > > +PLATFORM:mx7d = "IMX7D"
> > > +PLATFORM:mx7ulp = "IMX7D"
> > > +PLATFORM:mx8 = "IMX8"
> > >
> > > PARALLEL_MAKE = "-j 1"
> > > EXTRA_OEMAKE += "${PACKAGECONFIG_CONFARGS}"
> > >
> > > PACKAGECONFIG = "${@bb.utils.contains('DISTRO_FEATURES', 'x11',
> > > 'x11', '', d)}"
> > > -PACKAGECONFIG_append_imxvpu = " vpu"
> > > -PACKAGECONFIG_append_mx8m = " swpdm"
> > > +PACKAGECONFIG:append:imxvpu = " vpu"
> > > +PACKAGECONFIG:append:mx8m = " swpdm"
> > >
> > > PACKAGECONFIG[x11] = ",,libx11 libxdamage libxrender libxrandr"
> > > PACKAGECONFIG[vpu] = "HAS_VPU=true,HAS_VPU=false,virtual/imxvpu"
> > > diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-
> > > daemon_1.0.0.bb b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-
> > > daemon_1.0.0.bb
> > > index 88b9ee0ef218..d362fce3b83e 100644
> > > --- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> > > +++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro-daemon_1.0.0.bb
> > > @@ -4,7 +4,7 @@ LICENSE = "MIT"
> > > LIC_FILES_CHKSUM = "
> > > file://LICENSE.txt;md5=cd8bc2a79509c22fc9c1782a151210b1"
> > >
> > > DEPENDS = "imx-vpu-hantro"
> > > -DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
> > > +DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
> > >
> > > SRC_URI = " \
> > > ${FSL_MIRROR}/${BP}.tar.gz \
> > > @@ -13,9 +13,9 @@ SRC_URI = " \
> > > SRC_URI[md5sum] = "65417710ef22214523c37f50f34b6ab2"
> > > SRC_URI[sha256sum] =
> > > "897d174c4c0818f31012d8a60ed51fc83fdfc55fca2d2b0fc24a0db3e9f3b6e8"
> > >
> > > -PLATFORM_mx8mm = "IMX8MM"
> > > -PLATFORM_mx8mq = "IMX8MQ"
> > > -PLATFORM_mx8mp = "IMX8MP"
> > > +PLATFORM:mx8mm = "IMX8MM"
> > > +PLATFORM:mx8mq = "IMX8MQ"
> > > +PLATFORM:mx8mp = "IMX8MP"
> > >
> > > EXTRA_OEMAKE = " \
> > > CROSS_COMPILE="${HOST_PREFIX}" \
> > > diff --git a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > > b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > > index 20ac87c747db..d2fc8a1123ac 100644
> > > --- a/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > > +++ b/recipes-bsp/imx-vpu-hantro/imx-vpu-hantro_1.22.0.bb
> > > @@ -14,9 +14,9 @@ inherit fsl-eula-unpack use-imx-headers
> > >
> > > PARALLEL_MAKE="-j 1"
> > >
> > > -PLATFORM_mx8mm = "IMX8MM"
> > > -PLATFORM_mx8mq = "IMX8MQ"
> > > -PLATFORM_mx8mp = "IMX8MP"
> > > +PLATFORM:mx8mm = "IMX8MM"
> > > +PLATFORM:mx8mq = "IMX8MQ"
> > > +PLATFORM:mx8mp = "IMX8MP"
> > >
> > > EXTRA_OEMAKE = " \
> > > CROSS_COMPILE="${HOST_PREFIX}" \
> > > diff --git a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb b/recipes-
> > > bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> > > index ad44065ae576..36c3fee3a7a7 100644
> > > --- a/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> > > +++ b/recipes-bsp/isp-imx/isp-imx_4.2.2.13.0.bb
> > > @@ -42,7 +42,7 @@ EXTRA_OECMAKE += " \
> > > -Wno-dev \
> > > "
> > >
> > > -do_configure_prepend() {
> > > +do_configure:prepend() {
> > > export SDKTARGETSYSROOT=${STAGING_DIR_HOST}
> > > }
> > >
> > > diff --git a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > > b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > > index 726b1e16d84e..e57a4273bd36 100644
> > > --- a/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > > +++ b/recipes-bsp/libimxdmabuffer/libimxdmabuffer_1.0.1.bb
> > > @@ -26,15 +26,15 @@ EXTRA_OECONF = "--imx-linux-headers-
> > > path=${STAGING_INCDIR_IMX} \
> > > # libg2d. However, that implementation's g2d_alloc() function
> > > # is broken, so we cannot use it.
> > > LIBG2D_PACKAGECONFIG = "g2d"
> > > -LIBG2D_PACKAGECONFIG_imxdpu = ""
> > > +LIBG2D_PACKAGECONFIG:imxdpu = ""
> > >
> > > PACKAGECONFIG ?= " "
> > > -PACKAGECONFIG_append_imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
> > > -PACKAGECONFIG_append_imxipu = " ipu"
> > > -PACKAGECONFIG_append_imxpxp = " pxp"
> > > -PACKAGECONFIG_append_mx8m = " ion dwl"
> > > -PACKAGECONFIG_append_mx8qm = " ion"
> > > -PACKAGECONFIG_append_mx8qxp = " ion"
> > > +PACKAGECONFIG:append:imxgpu2d = " ${LIBG2D_PACKAGECONFIG}"
> > > +PACKAGECONFIG:append:imxipu = " ipu"
> > > +PACKAGECONFIG:append:imxpxp = " pxp"
> > > +PACKAGECONFIG:append:mx8m = " ion dwl"
> > > +PACKAGECONFIG:append:mx8qm = " ion"
> > > +PACKAGECONFIG:append:mx8qxp = " ion"
> > >
> > > HANTRO_CONF = "--hantro-headers-path=${STAGING_INCDIR}/hantro_dec --
> > > hantro-decoder-version=G2"
> > >
> > > diff --git a/recipes-bsp/mc-utils/mc-utils_git.bb b/recipes-bsp/mc-
> > > utils/mc-utils_git.bb
> > > index b3c79b99138e..a2f81fe0dc0a 100644
> > > --- a/recipes-bsp/mc-utils/mc-utils_git.bb
> > > +++ b/recipes-bsp/mc-utils/mc-utils_git.bb
> > > @@ -15,13 +15,13 @@ SRCREV =
> > > "8e0b863693fc2ccbc62a62c79b4e3db6da88c16e"
> > > S = "${WORKDIR}/git"
> > >
> > > MC_CFG ?= ""
> > > -MC_CFG_ls1088a = "ls1088a"
> > > -MC_CFG_ls2088a = "ls2088a"
> > > -MC_CFG_lx2160a = "lx2160a"
> > > -MC_CFG_lx2162aqds = "lx2162aqds"
> > > +MC_CFG:ls1088a = "ls1088a"
> > > +MC_CFG:ls2088a = "ls2088a"
> > > +MC_CFG:lx2160a = "lx2160a"
> > > +MC_CFG:lx2162aqds = "lx2162aqds"
> > >
> > > MC_FLAVOUR ?= "RDB"
> > > -MC_FLAVOUR_lx2162a = ""
> > > +MC_FLAVOUR:lx2162a = ""
> > >
> > > do_compile () {
> > > oe_runmake -C config
> > > diff --git a/recipes-bsp/rcw/rcw_git.bb b/recipes-bsp/rcw/rcw_git.bb
> > > index 693506157188..637035b2064c 100644
> > > --- a/recipes-bsp/rcw/rcw_git.bb
> > > +++ b/recipes-bsp/rcw/rcw_git.bb
> > > @@ -17,9 +17,9 @@ export PYTHON = "${USRBINPATH}/python3"
> > > M="${@d.getVar('MACHINE').replace('-64b','').replace('-
> > > 32b','').replace('-${SITEINFO_ENDIANNESS}','')}"
> > >
> > > BOARD_TARGETS="${M}"
> > > -BOARD_TARGETS_ls2088ardb="${M} ${M}_rev1.1"
> > > -BOARD_TARGETS_ls1088ardb-pb="ls1088ardb"
> > > -BOARD_TARGETS_lx2160ardb = "${M} ${M}_rev2"
> > > +BOARD_TARGETS:ls2088ardb="${M} ${M}_rev1.1"
> > > +BOARD_TARGETS:ls1088ardb-pb="ls1088ardb"
> > > +BOARD_TARGETS:lx2160ardb = "${M} ${M}_rev2"
> > >
> > > do_compile () {
> > > oe_runmake BOARDS="${BOARD_TARGETS}" DESTDIR=${D}/boot/rcw/
> > > diff --git a/recipes-bsp/u-boot/libubootenv_%.bbappend b/recipes-
> > > bsp/u-boot/libubootenv_%.bbappend
> > > index 2633c344739b..619b510e1e1c 100644
> > > --- a/recipes-bsp/u-boot/libubootenv_%.bbappend
> > > +++ b/recipes-bsp/u-boot/libubootenv_%.bbappend
> > > @@ -29,8 +29,8 @@ def fixup_uboot_config_dependency(d):
> > > # | Signed-off-by: Ming Liu <liu.ming50@gmail.com>
> > > # | Signed-off-by: Richard Purdie <
> > > richard.purdie@linuxfoundation.org>
> > > # `----
> > > - ubootmachine = d.getVar("UBOOT_MACHINE_pn-%s" %
> > > imx_default_bootloader)
> > > - ubootconfig = (d.getVar("UBOOT_CONFIG_pn-%s" %
> > > imx_default_bootloader) or "").split()
> > > + ubootmachine = d.getVar("UBOOT_MACHINE:pn-%s" %
> > > imx_default_bootloader)
> > > + ubootconfig = (d.getVar("UBOOT_CONFIG:pn-%s" %
> > > imx_default_bootloader) or "").split()
> > >
> > > d.setVar("UBOOT_CONFIG", ubootconfig)
> > > d.setVar("UBOOT_MACHINE", ubootmachine)
> > > diff --git a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > > b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > > index 7f02746b060f..2e79166b279a 100644
> > > --- a/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > > +++ b/recipes-bsp/u-boot/u-boot-fslc-mfgtool_2021.07.bb
> > > @@ -2,7 +2,7 @@
> > > # Copyright (C) 2014-2016 Freescale Semiconductor
> > > # Copyright 2017-2019 NXP
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-fslc:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-fslc:"
> > >
> > > require u-boot-fslc_${PV}.bb
> > > require u-boot-mfgtool.inc
> > > diff --git a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb b/recipes-
> > > bsp/u-boot/u-boot-fslc_2021.07.bb
> > > index 4f97c722dd6f..2e7bde3838f9 100644
> > > --- a/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> > > +++ b/recipes-bsp/u-boot/u-boot-fslc_2021.07.bb
> > > @@ -12,7 +12,7 @@ DEPENDS += "bc-native dtc-native python3-
> > > setuptools-native"
> > >
> > > # Location known to imx-boot component, where U-Boot artifacts
> > > # should be additionally deployed.
> > > -# See below note above do_deploy_append_mx8m for the purpose of
> > > +# See below note above do_deploy:append:mx8m for the purpose of
> > > # this delopyment location
> > > BOOT_TOOLS = "imx-boot-tools"
> > >
> > > @@ -48,7 +48,7 @@ EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC}
> > > ${BUILD_CPPFLAGS}" \
> > > # starts to use it - below append would not be necessary.
> > > # Once all mx8m derivatives are migrated to use the 'flash.bin' boot
> > > # container - this append can be dropped completely.
> > > -do_deploy_append_mx8m() {
> > > +do_deploy:append:mx8m() {
> > > # Deploy the mkimage, u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for
> > > mkimage to generate boot binary
> > > if [ -n "${UBOOT_CONFIG}" ]; then
> > > for config in ${UBOOT_MACHINE}; do
> > > diff --git a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > > b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > > index 2b296c192909..af5028896a34 100644
> > > --- a/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > > +++ b/recipes-bsp/u-boot/u-boot-imx-mfgtool_2021.04.bb
> > > @@ -2,7 +2,7 @@
> > > # Copyright (C) 2014-2016 Freescale Semiconductor
> > > # Copyright 2017-2019 NXP
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot-imx:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/u-boot-imx:"
> > >
> > > require u-boot-imx_${PV}.bb
> > > require u-boot-mfgtool.inc
> > > diff --git a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb b/recipes-
> > > bsp/u-boot/u-boot-imx_2021.04.bb
> > > index 6a279a12533d..bb5809e2a179 100644
> > > --- a/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> > > +++ b/recipes-bsp/u-boot/u-boot-imx_2021.04.bb
> > > @@ -7,7 +7,7 @@ require u-boot-imx-common_${PV}.inc
> > >
> > > PROVIDES += "u-boot"
> > >
> > > -do_deploy_append_mx8m() {
> > > +do_deploy:append:mx8m() {
> > > # Deploy u-boot-nodtb.bin and fsl-imx8m*-XX.dtb for mkimage to
> > > generate boot binary
> > > if [ -n "${UBOOT_CONFIG}" ]
> > > then
> > > diff --git a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb b/recipes-
> > > bsp/u-boot/u-boot-qoriq_2020.04.bb
> > > index 57f2780314c8..b6eee1d931a2 100644
> > > --- a/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> > > +++ b/recipes-bsp/u-boot/u-boot-qoriq_2020.04.bb
> > > @@ -19,14 +19,14 @@ SRCREV=
> > > "f46a944f715f284aff1d42c009680ffe0be4058f"
> > >
> > > S = "${WORKDIR}/git"
> > > B = "${WORKDIR}/build"
> > > -PV_append = "+fslgit"
> > > +PV:append = "+fslgit"
> > > LOCALVERSION = "+fsl"
> > >
> > > INHIBIT_DEFAULT_DEPS = "1"
> > > DEPENDS = "libgcc virtual/${TARGET_PREFIX}gcc bison-native bc-native
> > > swig-native python3-native"
> > > -DEPENDS_append_qoriq-arm64 = " dtc-native"
> > > -DEPENDS_append_qoriq-arm = " dtc-native"
> > > -DEPENDS_append_qoriq-ppc = " boot-format-native"
> > > +DEPENDS:append:qoriq-arm64 = " dtc-native"
> > > +DEPENDS:append:qoriq-arm = " dtc-native"
> > > +DEPENDS:append:qoriq-ppc = " boot-format-native"
> > >
> > > python () {
> > > if d.getVar("TCMODE") == "external-fsl":
> > > @@ -41,8 +41,8 @@ python () {
> > > sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib32-linux'
> > > sys_original = d.getVar('TARGET_VENDOR') + '-' +
> > > d.getVar('TARGET_OS')
> > > workdir = d.getVar('WORKDIR')
> > > - d.setVar('DEPENDS_append', ' lib32-gcc-cross-powerpc lib32-
> > > libgcc')
> > > - d.setVar('PATH_append', ':' +
> > > d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
> > > + d.setVar('DEPENDS:append', ' lib32-gcc-cross-powerpc lib32-
> > > libgcc')
> > > + d.setVar('PATH:append', ':' +
> > > d.getVar('STAGING_BINDIR_NATIVE') + '/powerpc' + sys_multilib)
> > > d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir +
> > > '/lib32-recipe-sysroot')
> > > d.setVar("WRAP_TARGET_PREFIX", 'powerpc' + sys_multilib + '-
> > > ')
> > > elif "fsl-lsch2-32b:" in arch:
> > > @@ -51,8 +51,8 @@ python () {
> > > sys_multilib = d.getVar('TARGET_VENDOR') + 'mllib64-linux'
> > > sys_original = d.getVar('TARGET_VENDOR') + '-' +
> > > d.getVar('TARGET_OS')
> > > workdir = d.getVar('WORKDIR')
> > > - d.setVar('DEPENDS_append', ' lib64-gcc-cross-aarch64 lib64-
> > > libgcc')
> > > - d.setVar('PATH_append', ':' +
> > > d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
> > > + d.setVar('DEPENDS:append', ' lib64-gcc-cross-aarch64 lib64-
> > > libgcc')
> > > + d.setVar('PATH:append', ':' +
> > > d.getVar('STAGING_BINDIR_NATIVE') + '/aarch64' + sys_multilib)
> > > d.setVar('TOOLCHAIN_OPTIONS', '--sysroot=' + workdir +
> > > '/lib64-recipe-sysroot')
> > > d.setVar("WRAP_TARGET_PREFIX", 'aarch64' + sys_multilib + '-
> > > ')
> > > }
> > > @@ -66,7 +66,7 @@ EXTRA_OEMAKE = 'CROSS_COMPILE=${WRAP_TARGET_PREFIX}
> > > CC="${WRAP_TARGET_PREFIX}gcc
> > > EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS}
> > > ${BUILD_LDFLAGS}"'
> > > EXTRA_OEMAKE += 'STAGING_INCDIR=${STAGING_INCDIR_NATIVE}
> > > STAGING_LIBDIR=${STAGING_LIBDIR_NATIVE}'
> > >
> > > -do_compile_append_qoriq() {
> > > +do_compile:append:qoriq() {
> > > unset i j k
> > > for config in ${UBOOT_MACHINE}; do
> > > i=`expr $i + 1`;
> > > diff --git a/recipes-connectivity/iproute2/iproute2_%.bbappend
> > > b/recipes-connectivity/iproute2/iproute2_%.bbappend
> > > index 4426eca57f1a..0f9b5a87defd 100644
> > > --- a/recipes-connectivity/iproute2/iproute2_%.bbappend
> > > +++ b/recipes-connectivity/iproute2/iproute2_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -do_install_append () {
> > > +do_install:append () {
> > > install -d ${D}/usr/include/tc
> > > cp -a ${B}/include ${D}/usr/include
> > > cp -a ${B}/tc/*.h ${D}/usr/include/tc
> > > diff --git a/recipes-connectivity/openssl/openssl_%.bbappend
> > > b/recipes-connectivity/openssl/openssl_%.bbappend
> > > index ce4ff276e633..e88de3618243 100644
> > > --- a/recipes-connectivity/openssl/openssl_%.bbappend
> > > +++ b/recipes-connectivity/openssl/openssl_%.bbappend
> > > @@ -1,8 +1,8 @@
> > > -FILESEXTRAPATHS_append := "${THISDIR}/${PN}-qoriq:"
> > > +FILESEXTRAPATHS:append := "${THISDIR}/${PN}-qoriq:"
> > >
> > > -SRC_URI_append_qoriq = " \
> > > +SRC_URI:append:qoriq = " \
> > >
> > > file://0001-eng_devcrypto-add-support-for-TLS-algorithms-offload.patch
> > > \
> > >
> > > file://0002-eng_devcrypto-add-support-for-TLS1.2-algorithms-offl.patch
> > > \
> > > "
> > >
> > > -PACKAGECONFIG_append_qoriq = " cryptodev-linux"
> > > +PACKAGECONFIG:append:qoriq = " cryptodev-linux"
> > > diff --git a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > > b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > > index 000578744ac2..46dfc1245600 100644
> > > --- a/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > > +++ b/recipes-core/init-ifupdown/init-ifupdown_%.bbappend
> > > @@ -1,2 +1,2 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > >
> > > diff --git a/recipes-core/udev/udev-rules-qoriq.bb b/recipes-
> > > core/udev/udev-rules-qoriq.bb
> > > index c328f4ccbd97..e39da44ce7f3 100644
> > > --- a/recipes-core/udev/udev-rules-qoriq.bb
> > > +++ b/recipes-core/udev/udev-rules-qoriq.bb
> > > @@ -18,11 +18,11 @@ RULE_t1024 = "72-fsl-dpaa-persistent-
> > > networking.rules"
> > > RULE_qoriq-arm64 = "73-fsl-dpaa-persistent-networking.rules \
> > > 73-fsl-enetc-networking.rules \
> > > "
> > > -RULE_ls1046a = "73-fsl-dpaa-persistent-networking.rules \
> > > +RULE:ls1046a = "73-fsl-dpaa-persistent-networking.rules \
> > > 74-ls1046a-xfi2-networking.rules \
> > > "
> > > -RULE_ls1012a = ""
> > > -RULE_ls2080a = ""
> > > +RULE:ls1012a = ""
> > > +RULE:ls2080a = ""
> > >
> > > do_install () {
> > > install -d ${D}${sysconfdir}/udev/rules.d/
> > > diff --git a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb b/recipes-
> > > devtools/qemu/qemu-qoriq_4.1.0.bb
> > > index dfd7fdcfcd20..fe43a5e1883e 100644
> > > --- a/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> > > +++ b/recipes-devtools/qemu/qemu-qoriq_4.1.0.bb
> > > @@ -32,11 +32,11 @@ python() {
> > >
> > > RDEPENDS_${PN}_class-target += "bash"
> > >
> > > -EXTRA_OECONF_append_class-target = "
> > > --target-list=${@get_qemu_target_list(d)}"
> > > -EXTRA_OECONF_append_class-target_mipsarcho32 = "
> > > ${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-
> > > capstone', '', d)}"
> > > -EXTRA_OECONF_append_class-nativesdk = "
> > > --target-list=${@get_qemu_target_list(d)}"
> > > +EXTRA_OECONF:append:class-target = "
> > > --target-list=${@get_qemu_target_list(d)}"
> > > +EXTRA_OECONF:append:class-target_mipsarcho32 = "
> > > ${@bb.utils.contains('BBEXTENDCURR', 'multilib', ' --disable-
> > > capstone', '', d)}"
> > > +EXTRA_OECONF:append:class-nativesdk = "
> > > --target-list=${@get_qemu_target_list(d)}"
> > >
> > > -do_install_append_class-nativesdk() {
> > > +do_install:append:class-nativesdk() {
> > > ${@bb.utils.contains('PACKAGECONFIG', 'gtk+',
> > > 'make_qemu_wrapper', '', d)}
> > > }
> > >
> > > diff --git a/recipes-devtools/qemu/qemu.inc b/recipes-
> > > devtools/qemu/qemu.inc
> > > index bf05da9a4c3a..77d067da7ab2 100644
> > > --- a/recipes-devtools/qemu/qemu.inc
> > > +++ b/recipes-devtools/qemu/qemu.inc
> > > @@ -52,7 +52,7 @@ COMPATIBLE_HOST_mipsarchn64 = "null"
> > > # upstream states qemu doesn't work without optimization
> > > DEBUG_BUILD = "0"
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > # Prevent QA warnings about installed ${localstatedir}/run
> > > if [ -d ${D}${localstatedir}/run ]; then rmdir
> > > ${D}${localstatedir}/run; fi
> > > }
> > > @@ -101,9 +101,9 @@ export LIBTOOL="${HOST_SYS}-libtool"
> > >
> > > B = "${WORKDIR}/build"
> > >
> > > -EXTRA_OECONF_append = " --python=${HOSTTOOLS_DIR}/python3"
> > > +EXTRA_OECONF:append = " --python=${HOSTTOOLS_DIR}/python3"
> > >
> > > -do_configure_prepend_class-native() {
> > > +do_configure:prepend:class-native() {
> > > # Append build host pkg-config paths for native target since
> > > the host may provide sdl
> > > BHOST_PKGCONFIG_PATH=$(PATH=/usr/bin:/bin pkg-config --
> > > variable pc_path pkg-config || echo "")
> > > if [ ! -z "$BHOST_PKGCONFIG_PATH" ]; then
> > > @@ -127,7 +127,7 @@ do_install () {
> > > # This will trigger a MMU access fault in the virtual CPU. With this
> > > change,
> > > # the qemu-mips works fine.
> > > # IMPORTANT: This piece needs to be removed once the root cause is
> > > fixed!
> > > -do_install_append() {
> > > +do_install:append() {
> > > if [ -e "${D}/${bindir}/qemu-mips" ]; then
> > > create_wrapper ${D}/${bindir}/qemu-mips \
> > > QEMU_RESERVED_VA=0x0
> > > @@ -147,8 +147,8 @@ make_qemu_wrapper() {
> > > }
> > >
> > > # Disable kvm/virgl/mesa on targets that do not support it
> > > -PACKAGECONFIG_remove_darwin = "kvm virglrenderer glx gtk+"
> > > -PACKAGECONFIG_remove_mingw32 = "kvm virglrenderer glx gtk+"
> > > +PACKAGECONFIG:remove:darwin = "kvm virglrenderer glx gtk+"
> > > +PACKAGECONFIG:remove:mingw32 = "kvm virglrenderer glx gtk+"
> > >
> > > PACKAGECONFIG[sdl] = "--enable-sdl,--disable-sdl,libsdl2"
> > > PACKAGECONFIG[virtfs] = "--enable-virtfs --enable-attr --enable-cap-
> > > ng,--disable-virtfs,libcap-ng attr,"
> > > diff --git a/recipes-dpaa/fm-ucode/fm-ucode_git.bb b/recipes-dpaa/fm-
> > > ucode/fm-ucode_git.bb
> > > index 39e4f9d0febb..319a56b33568 100644
> > > --- a/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> > > +++ b/recipes-dpaa/fm-ucode/fm-ucode_git.bb
> > > @@ -13,13 +13,13 @@ SRCREV =
> > > "c275e91392e2adab1ed22f3867b8269ca3c54014"
> > > S = "${WORKDIR}/git"
> > >
> > > REGLEX ?= "${MACHINE}"
> > > -REGLEX_t1023 = "t1024"
> > > -REGLEX_t1040 = "t1040"
> > > -REGLEX_t1042 = "t1040"
> > > -REGLEX_b4420 = "b4860"
> > > -REGLEX_t4160 = "t4240"
> > > -REGLEX_ls1043a = "ls1043"
> > > -REGLEX_ls1046a = "ls1046"
> > > +REGLEX:t1023 = "t1024"
> > > +REGLEX:t1040 = "t1040"
> > > +REGLEX:t1042 = "t1040"
> > > +REGLEX:b4420 = "b4860"
> > > +REGLEX:t4160 = "t4240"
> > > +REGLEX:ls1043a = "ls1043"
> > > +REGLEX:ls1046a = "ls1046"
> > >
> > > do_install () {
> > > UCODE=`echo ${REGLEX} | sed -e 's,-.*$,,' -e 's,[a-zA-Z]*$,,'`
> > > diff --git a/recipes-dpaa2/aiopsl/aiopsl_git.bb b/recipes-
> > > dpaa2/aiopsl/aiopsl_git.bb
> > > index a1b0028938e5..794d013c5c2b 100644
> > > --- a/recipes-dpaa2/aiopsl/aiopsl_git.bb
> > > +++ b/recipes-dpaa2/aiopsl/aiopsl_git.bb
> > > @@ -13,8 +13,8 @@ SRCREV = "87d83d8e99770325cc7ad9e10965c9959e7cb828"
> > > do_configure[noexec] = "1"
> > > do_compile[noexec] = "1"
> > >
> > > -DEMOS_PATH_ls2088a = "LS2088A"
> > > -DEMOS_PATH_ls1088a = "LS1088A"
> > > +DEMOS_PATH:ls2088a = "LS2088A"
> > > +DEMOS_PATH:ls1088a = "LS1088A"
> > >
> > > do_install () {
> > > install -d ${D}/usr/aiop/bin
> > > diff --git a/recipes-dpaa2/management-complex/management-
> > > complex_10.14.1.bb b/recipes-dpaa2/management-complex/management-
> > > complex_10.14.1.bb
> > > index ddb305c1a36c..69804e9fa68e 100644
> > > --- a/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> > > +++ b/recipes-dpaa2/management-complex/management-complex_10.14.1.bb
> > > @@ -11,10 +11,10 @@ SRCREV =
> > > "408110ee632f6291545b0b156cd74e7e3b4612cc"
> > >
> > > S = "${WORKDIR}/git"
> > >
> > > -REGLEX_ls2088a = "ls2088a"
> > > -REGLEX_ls2080a = "ls2080a"
> > > -REGLEX_ls1088a = "ls1088a"
> > > -REGLEX_lx2160a = "lx2160a"
> > > +REGLEX:ls2088a = "ls2088a"
> > > +REGLEX:ls2080a = "ls2080a"
> > > +REGLEX:ls1088a = "ls1088a"
> > > +REGLEX:lx2160a = "lx2160a"
> > >
> > > do_install () {
> > > install -d ${D}/boot
> > > diff --git a/recipes-dpaa2/management-complex/management-
> > > complex_10.20.4.bb b/recipes-dpaa2/management-complex/management-
> > > complex_10.20.4.bb
> > > index 3e14a26eabeb..7e0059703738 100644
> > > --- a/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> > > +++ b/recipes-dpaa2/management-complex/management-complex_10.20.4.bb
> > > @@ -11,10 +11,10 @@ SRCREV =
> > > "f73683596a7b72124d67b62e64f3dc2bb36b9321"
> > >
> > > S = "${WORKDIR}/git"
> > >
> > > -REGLEX_ls2088a = "ls2088a"
> > > -REGLEX_ls2080a = "ls2080a"
> > > -REGLEX_ls1088a = "ls1088a"
> > > -REGLEX_lx2160a = "lx2160a"
> > > +REGLEX:ls2088a = "ls2088a"
> > > +REGLEX:ls2080a = "ls2080a"
> > > +REGLEX:ls1088a = "ls1088a"
> > > +REGLEX:lx2160a = "lx2160a"
> > >
> > > do_install () {
> > > install -d ${D}/boot
> > > diff --git a/recipes-dpaa2/management-complex/management-
> > > complex_10.24.0.bb b/recipes-dpaa2/management-complex/management-
> > > complex_10.24.0.bb
> > > index 17049a15e7c8..12c1a4d89dff 100644
> > > --- a/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> > > +++ b/recipes-dpaa2/management-complex/management-complex_10.24.0.bb
> > > @@ -11,11 +11,11 @@ SRCREV =
> > > "324817697a4c89a9a940fb7dba1b18909913ee20"
> > >
> > > S = "${WORKDIR}/git"
> > >
> > > -REGLEX_ls2088a = "ls2088a"
> > > -REGLEX_ls2080a = "ls2080a"
> > > -REGLEX_ls1088a = "ls1088a"
> > > -REGLEX_lx2160a = "lx216xa"
> > > -REGLEX_lx2162a = "lx216xa"
> > > +REGLEX:ls2088a = "ls2088a"
> > > +REGLEX:ls2080a = "ls2080a"
> > > +REGLEX:ls1088a = "ls1088a"
> > > +REGLEX:lx2160a = "lx216xa"
> > > +REGLEX:lx2162a = "lx216xa"
> > >
> > > do_install () {
> > > install -d ${D}/boot
> > > diff --git a/recipes-extended/dpdk/dpdk.inc b/recipes-
> > > extended/dpdk/dpdk.inc
> > > index 61c02ae75f90..2d07187d14fd 100644
> > > --- a/recipes-extended/dpdk/dpdk.inc
> > > +++ b/recipes-extended/dpdk/dpdk.inc
> > > @@ -3,23 +3,23 @@ HOMEPAGE = "http://dpdk.org"
> > >
> > > RDEPENDS_${PN} += "python3-core"
> > > DEPENDS = "virtual/kernel openssl"
> > > -DEPENDS_append_x86-64 = " numactl"
> > > +DEPENDS:append:x86-64 = " numactl"
> > > do_configure[depends] += "virtual/kernel:do_shared_workdir"
> > >
> > > inherit module
> > >
> > > COMPATIBLE_HOST = '(aarch64|arm|i.86|x86_64).*-linux'
> > > -COMPATIBLE_HOST_libc-musl = 'null'
> > > -COMPATIBLE_HOST_armv4 = 'null'
> > > -COMPATIBLE_HOST_armv5 = 'null'
> > > -COMPATIBLE_HOST_armv6 = 'null'
> > > +COMPATIBLE_HOST:libc-musl = 'null'
> > > +COMPATIBLE_HOST:armv4 = 'null'
> > > +COMPATIBLE_HOST:armv5 = 'null'
> > > +COMPATIBLE_HOST:armv6 = 'null'
> > >
> > > COMPATIBLE_MACHINE = "(imx|qoriq)"
> > >
> > > -DPDK_RTE_TARGET_x86-64 = "x86_64-native-linuxapp-gcc"
> > > -DPDK_RTE_TARGET_x86 = "i686-native-linuxapp-gcc"
> > > -DPDK_RTE_TARGET_armv7a = "${ARCH}-armv7a-linuxapp-gcc"
> > > -DPDK_RTE_TARGET_armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
> > > +DPDK_RTE_TARGET:x86-64 = "x86_64-native-linuxapp-gcc"
> > > +DPDK_RTE_TARGET:x86 = "i686-native-linuxapp-gcc"
> > > +DPDK_RTE_TARGET:armv7a = "${ARCH}-armv7a-linuxapp-gcc"
> > > +DPDK_RTE_TARGET:armv7ve = "${ARCH}-armv7a-linuxapp-gcc"
> > > DPDK_RTE_TARGET ?= "${ARCH}-dpaa-linuxapp-gcc"
> > >
> > > export RTE_TARGET = "${DPDK_RTE_TARGET}"
> > > diff --git a/recipes-extended/dpdk/dpdk_19.11-20.12.bb b/recipes-
> > > extended/dpdk/dpdk_19.11-20.12.bb
> > > index 426713c2d1d7..37582124b021 100644
> > > --- a/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> > > +++ b/recipes-extended/dpdk/dpdk_19.11-20.12.bb
> > > @@ -13,7 +13,7 @@ SRCREV = "7071c27f6f5aefb57de1cffab3484707b1e82e2b"
> > >
> > > include dpdk.inc
> > >
> > > -do_install_append () {
> > > +do_install:append () {
> > > # Remove the unneeded dir
> > > rm -rf ${D}/${datadir}/${RTE_TARGET}/app
> > > }
> > > diff --git a/recipes-extended/jailhouse/jailhouse_0.12.bb b/recipes-
> > > extended/jailhouse/jailhouse_0.12.bb
> > > index c49d7f5b194e..a83592d24f1f 100644
> > > --- a/recipes-extended/jailhouse/jailhouse_0.12.bb
> > > +++ b/recipes-extended/jailhouse/jailhouse_0.12.bb
> > > @@ -39,9 +39,9 @@ CELLCONF_DIR ?= "${JH_DATADIR}/configs"
> > > INMATES_DIR ?= "${JH_DATADIR}/inmates"
> > >
> > > JH_CONFIG ?= "${S}/ci/jailhouse-config-x86.h"
> > > -JH_CONFIG_x86 ?= "${S}/ci/jailhouse-config-x86.h"
> > > -JH_CONFIG_x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
> > > -JH_CONFIG_arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
> > > +JH_CONFIG:x86 ?= "${S}/ci/jailhouse-config-x86.h"
> > > +JH_CONFIG:x86-64 ?= "${S}/ci/jailhouse-config-x86.h"
> > > +JH_CONFIG:arm ?= "${S}/ci/jailhouse-config-banana-pi.h"
> > >
> > > do_configure() {
> > > if [ -d ${STAGING_DIR_HOST}/${CELLCONF_DIR} ];
> > > diff --git a/recipes-extended/odp/odp-counters_git.bb b/recipes-
> > > extended/odp/odp-counters_git.bb
> > > index 860dd5faf450..9d88ea43edee 100644
> > > --- a/recipes-extended/odp/odp-counters_git.bb
> > > +++ b/recipes-extended/odp/odp-counters_git.bb
> > > @@ -2,7 +2,7 @@ require odp.inc
> > >
> > > inherit module
> > >
> > > -do_compile_prepend () {
> > > +do_compile:prepend () {
> > > export KERNEL_PATH="${STAGING_KERNEL_DIR}"
> > > export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
> > > cd ${S}/test/debug/perf_counters
> > > diff --git a/recipes-extended/odp/odp-module_git.bb b/recipes-
> > > extended/odp/odp-module_git.bb
> > > index 46b896547a91..8bcdcd81573d 100644
> > > --- a/recipes-extended/odp/odp-module_git.bb
> > > +++ b/recipes-extended/odp/odp-module_git.bb
> > > @@ -2,7 +2,7 @@ require odp.inc
> > >
> > > inherit module
> > >
> > > -do_compile_prepend () {
> > > +do_compile:prepend () {
> > > export KERNEL_PATH="${STAGING_KERNEL_DIR}"
> > > export KERNEL_CFG_PATH="${STAGING_KERNEL_BUILDDIR}"
> > > cd ${S}/kern
> > > diff --git a/recipes-extended/odp/odp.inc b/recipes-
> > > extended/odp/odp.inc
> > > index 129f77ae108b..d1e10b0f94d4 100644
> > > --- a/recipes-extended/odp/odp.inc
> > > +++ b/recipes-extended/odp/odp.inc
> > > @@ -6,7 +6,7 @@ SECTION = "console/network"
> > > LICENSE = "BSD-3-Clause"
> > > LIC_FILES_CHKSUM = "
> > > file://LICENSE;md5=ca6103dc75397fb6bec596187d6b7829"
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/odp:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/odp:"
> > >
> > > SRC_URI = " \
> > > git://source.codeaurora.org/external/qoriq/qoriq-
> > > components/odp;nobranch=1 \
> > > diff --git a/recipes-extended/odp/odp_git.bb b/recipes-
> > > extended/odp/odp_git.bb
> > > index 00575e24d5a8..bfe251ed6bda 100644
> > > --- a/recipes-extended/odp/odp_git.bb
> > > +++ b/recipes-extended/odp/odp_git.bb
> > > @@ -9,14 +9,14 @@ DEPENDS = "openssl cunit libxml2"
> > > RDEPENDS_${PN} = "bash libcrypto libssl odp-module odp-counters"
> > >
> > > ODP_SOC ?= ""
> > > -ODP_SOC_ls1043ardb = "LS1043"
> > > -ODP_SOC_ls1046ardb = "LS1046"
> > > +ODP_SOC:ls1043ardb = "LS1043"
> > > +ODP_SOC:ls1046ardb = "LS1046"
> > > ODP_PLATFORM ?= "linux-dpaa2"
> > > ODP_BUILD_TYPE ?= "ls2088"
> > > -ODP_BUILD_TYPE_ls1043ardb = "ls1043"
> > > -ODP_BUILD_TYPE_ls1046ardb = "ls1046"
> > > -ODP_BUILD_TYPE_ls2080ardb = "ls2080"
> > > -ODP_BUILD_TYPE_ls1088ardb = "ls1088"
> > > +ODP_BUILD_TYPE:ls1043ardb = "ls1043"
> > > +ODP_BUILD_TYPE:ls1046ardb = "ls1046"
> > > +ODP_BUILD_TYPE:ls2080ardb = "ls2080"
> > > +ODP_BUILD_TYPE:ls1088ardb = "ls1088"
> > >
> > > EXTRA_OECONF = "--with-platform=${ODP_PLATFORM} \
> > > --enable-test-vald \
> > > @@ -34,17 +34,17 @@ CFLAGS += "-Wno-format-truncation -Wno-maybe-
> > > uninitialized -Wno-implicit-fallthr
> > >
> > > PACKAGECONFIG[perf] = "--enable-test-perf,,,"
> > >
> > > -do_configure_prepend () {
> > > +do_configure:prepend () {
> > > export SOC=${ODP_SOC}
> > > ${S}/bootstrap
> > > }
> > >
> > > -do_compile_prepend () {
> > > +do_compile:prepend () {
> > > export SOC=${ODP_SOC}
> > > export ARCH=${TUNE_ARCH}
> > > }
> > >
> > > -do_install_append () {
> > > +do_install:append () {
> > > install -d ${D}${includedir}/odp/kni
> > > install -d ${D}${includedir}/odp/kern
> > > install -d ${D}${includedir}/odp/flib/mc
> > > diff --git a/recipes-extended/procps/procps_%.bbappend b/recipes-
> > > extended/procps/procps_%.bbappend
> > > index face0ccc0f61..43fb349b8de2 100644
> > > --- a/recipes-extended/procps/procps_%.bbappend
> > > +++ b/recipes-extended/procps/procps_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -do_install_append_qoriq-ppc() {
> > > +do_install:append:qoriq-ppc() {
> > > for keyword in \
> > > net.ipv4.conf.default.rp_filter \
> > > net.ipv4.conf.all.rp_filter \
> > > diff --git a/recipes-extended/testfloat/testfloat_2a.bb b/recipes-
> > > extended/testfloat/testfloat_2a.bb
> > > index 800cef3d172e..6777249f39e3 100644
> > > --- a/recipes-extended/testfloat/testfloat_2a.bb
> > > +++ b/recipes-extended/testfloat/testfloat_2a.bb
> > > @@ -6,7 +6,7 @@ LIC_FILES_CHKSUM = "
> > > file://testfloat/testfloat.txt;beginline=87;endline=95;md5=b
> > > SRC_URI = "
> > > http://www.jhauser.us/arithmetic/TestFloat-2a.tar.Z;name=TestFloat \
> > >
> > > http://www.jhauser.us/arithmetic/SoftFloat-2b.tar.Z;name=SoftFloat \
> > > "
> > > -SRC_URI_append_qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
> > > +SRC_URI:append:qoriq-ppc = " file://SoftFloat-powerpc-1.patch \
> > >
> > > file://TestFloat-powerpc-E500v2-SPE-1.patch \
> > >
> > > file://Yocto-replace-COMPILE_PREFIX-gcc.patch \
> > > "
> > > diff --git a/recipes-extended/tsntool/tsntool_git.bb b/recipes-
> > > extended/tsntool/tsntool_git.bb
> > > index 8ef79d27c8bd..ea452f7c82f3 100644
> > > --- a/recipes-extended/tsntool/tsntool_git.bb
> > > +++ b/recipes-extended/tsntool/tsntool_git.bb
> > > @@ -14,7 +14,7 @@ S = "${WORKDIR}/git"
> > >
> > > do_configure[depends] += "virtual/kernel:do_shared_workdir"
> > >
> > > -do_compile_prepend() {
> > > +do_compile:prepend() {
> > > mkdir -p ${S}/include/linux
> > > cp -r ${STAGING_KERNEL_DIR}/include/uapi/linux/tsn.h
> > > ${S}/include/linux
> > > }
> > > diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > > b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > > index 4ad257ee9364..9229e26683a6 100644
> > > --- a/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > > +++ b/recipes-fsl/packagegroups/packagegroup-fsl-isp.bb
> > > @@ -3,7 +3,7 @@ DESCRIPTION = "Add packages for ISP build"
> > > inherit packagegroup
> > >
> > > ISP_PKGS ?= ""
> > > -ISP_PKGS_mx8mp = " \
> > > +ISP_PKGS:mx8mp = " \
> > > isp-imx \
> > > basler-camera \
> > > basler-camera-dev \
> > > diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > > b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > > index aeba762386f3..acadd526bc61 100644
> > > --- a/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > > +++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca6174.bb
> > > @@ -10,4 +10,4 @@ RDEPENDS_${PN} = " \
> > > "
> > >
> > > COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> > > -COMPATIBLE_HOST_libc-musl = 'null'
> > > +COMPATIBLE_HOST:libc-musl = 'null'
> > > diff --git a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > > b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > > index 43df5a70e670..233e3d00fa92 100644
> > > --- a/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > > +++ b/recipes-fsl/packagegroups/packagegroup-fsl-qca9377.bb
> > > @@ -9,4 +9,4 @@ RDEPENDS_${PN} = " \
> > > firmware-qca9377 \
> > > "
> > > COMPATIBLE_HOST = '(aarch64|arm).*-linux'
> > > -COMPATIBLE_HOST_libc-musl = 'null'
> > > +COMPATIBLE_HOST:libc-musl = 'null'
> > > diff --git a/recipes-graphics/cairo/cairo_%.bbappend b/recipes-
> > > graphics/cairo/cairo_%.bbappend
> > > index 5b1562ab8b4d..2c73c7f32f25 100644
> > > --- a/recipes-graphics/cairo/cairo_%.bbappend
> > > +++ b/recipes-graphics/cairo/cairo_%.bbappend
> > > @@ -1,2 +1,2 @@
> > > -PACKAGECONFIG_append_imxgpu3d = " egl glesv2"
> > > -PACKAGECONFIG_remove_imxgpu3d = "opengl"
> > > +PACKAGECONFIG:append:imxgpu3d = " egl glesv2"
> > > +PACKAGECONFIG:remove:imxgpu3d = "opengl"
> > > diff --git a/recipes-graphics/drm/libdrm_2.4.102.imx.bb b/recipes-
> > > graphics/drm/libdrm_2.4.102.imx.bb
> > > index 6935b7822b63..371d2e1775d8 100644
> > > --- a/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> > > +++ b/recipes-graphics/drm/libdrm_2.4.102.imx.bb
> > > @@ -64,10 +64,10 @@ FILES_${PN}-etnaviv =
> > > "${libdir}/libdrm_etnaviv.so.*"
> > >
> > > BBCLASSEXTEND = "native nativesdk"
> > >
> > > -PACKAGES_prepend_imxgpu = "${PN}-vivante "
> > > -RRECOMMENDS_${PN}-drivers_append_imxgpu = " ${PN}-vivante"
> > > +PACKAGES:prepend:imxgpu = "${PN}-vivante "
> > > +RRECOMMENDS_${PN}-drivers:append:imxgpu = " ${PN}-vivante"
> > > FILES_${PN}-vivante = "${libdir}/libdrm_vivante.so.*"
> > > -PACKAGECONFIG_append_imxgpu = " vivante"
> > > +PACKAGECONFIG:append:imxgpu = " vivante"
> > > PACKAGECONFIG[vivante] = "-Dvivante=true,-Dvivante=false"
> > >
> > > PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> > > diff --git a/recipes-graphics/gtk+/gtk+3_%.bbappend b/recipes-
> > > graphics/gtk+/gtk+3_%.bbappend
> > > index be2bac75fbf8..2f108a274b0f 100644
> > > --- a/recipes-graphics/gtk+/gtk+3_%.bbappend
> > > +++ b/recipes-graphics/gtk+/gtk+3_%.bbappend
> > > @@ -1,5 +1,5 @@
> > > -DEPENDS_append_imxgpu2d = " virtual/egl"
> > > +DEPENDS:append:imxgpu2d = " virtual/egl"
> > >
> > > -PACKAGECONFIG_remove_imxgpu2d = " \
> > > +PACKAGECONFIG:remove:imxgpu2d = " \
> > > ${@bb.utils.contains("DISTRO_FEATURES", "wayland", "x11", "",
> > > d)} \
> > > "
> > > diff --git a/recipes-graphics/images/core-image-weston.bbappend
> > > b/recipes-graphics/images/core-image-weston.bbappend
> > > index 2a3cde69a8cd..77d2fe747801 100644
> > > --- a/recipes-graphics/images/core-image-weston.bbappend
> > > +++ b/recipes-graphics/images/core-image-weston.bbappend
> > > @@ -1,3 +1,3 @@
> > > # FIXME: i.MX6SL cannot use mesa for Graphics and it lacks GL
> > > support,
> > > # so for now we skip it.
> > > -CORE_IMAGE_BASE_INSTALL_remove_mx6sl = "clutter-1.0-examples"
> > > +CORE_IMAGE_BASE_INSTALL:remove:mx6sl = "clutter-1.0-examples"
> > > diff --git a/recipes-graphics/imx-gpu-apitrace/imx-gpu-
> > > apitrace_9.0.0.bb b/recipes-graphics/imx-gpu-apitrace/imx-gpu-
> > > apitrace_9.0.0.bb
> > > index 65ce9cd567b4..d0ac10bdb9a2 100644
> > > --- a/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> > > +++ b/recipes-graphics/imx-gpu-apitrace/imx-gpu-apitrace_9.0.0.bb
> > > @@ -11,16 +11,16 @@ S = "${WORKDIR}/git"
> > >
> > > inherit cmake pkgconfig perlnative python3native
> > >
> > > -PACKAGECONFIG_BACKEND_mx6 = " \
> > > +PACKAGECONFIG_BACKEND:mx6 = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'waffle', \
> > > bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', \
> > > '', d),
> > > d)} \
> > > "
> > > -PACKAGECONFIG_BACKEND_mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
> > > -PACKAGECONFIG_BACKEND_mx8 = "waffle"
> > > +PACKAGECONFIG_BACKEND:mx7 = "${PACKAGECONFIG_BACKEND_mx6}"
> > > +PACKAGECONFIG_BACKEND:mx8 = "waffle"
> > >
> > > PACKAGECONFIG_GPU2D = ""
> > > -PACKAGECONFIG_GPU2D_imxgpu2d = "vivante"
> > > +PACKAGECONFIG_GPU2D:imxgpu2d = "vivante"
> > >
> > > PACKAGECONFIG ??= " \
> > > egl \
> > > diff --git a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > > b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > > index 91a5542bd7a4..4c732ff2feb0 100644
> > > --- a/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > > +++ b/recipes-graphics/imx-gpu-viv/imx-gpu-viv-6.inc
> > > @@ -17,8 +17,8 @@ DEPENDS += " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'libxcb
> > > libxshmfence libxxf86vm', \
> > > '', d)} \
> > > "
> > > -DEPENDS_append_imxdrm = " libdrm wayland"
> > > -DEPENDS_append_mx8 = " patchelf-native"
> > > +DEPENDS:append:imxdrm = " libdrm wayland"
> > > +DEPENDS:append:mx8 = " patchelf-native"
> > >
> > > # imx-gpu-viv does not provide everything it needs to for
> > > virtual/libgl
> > > # on x11 backend or on Wayland backend with XWayland support.
> > > @@ -26,19 +26,19 @@ DEPENDS_append_mx8 = " patchelf-native"
> > > DEPENDS += "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'mesa',
> > > '', d)}"
> > >
> > > EXTRA_PROVIDES = ""
> > > -EXTRA_PROVIDES_append_imxgpu3d = " \
> > > +EXTRA_PROVIDES:append:imxgpu3d = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland',
> > > 'virtual/libgl', \
> > > bb.utils.contains('DISTRO_FEATURES', 'x11',
> > > 'virtual/libgl', \
> > > '', d), d)} \
> > > virtual/libgles1 \
> > > virtual/libgles2 \
> > > "
> > > -EXTRA_PROVIDES_append_mx8 = " \
> > > +EXTRA_PROVIDES:append:mx8 = " \
> > > virtual/libgbm \
> > > "
> > > PROVIDES_OPENVX = ""
> > > -PROVIDES_OPENVX_mx8 = "virtual/libopenvx"
> > > -PROVIDES_OPENVX_mx8mm = ""
> > > +PROVIDES_OPENVX:mx8 = "virtual/libopenvx"
> > > +PROVIDES_OPENVX:mx8mm = ""
> > > PROVIDES += " \
> > > imx-gpu-viv \
> > > libgal-imx \
> > > @@ -52,13 +52,13 @@ PROVIDES += " \
> > > ${EXTRA_PROVIDES} \
> > > "
> > >
> > > -RPROVIDES_${PN}_imxgpu3d += "imx-gpu-viv"
> > > +RPROVIDES_${PN}:imxgpu3d += "imx-gpu-viv"
> > >
> > > PE = "1"
> > >
> > > inherit fsl-eula-unpack features_check
> > >
> > > -REQUIRED_DISTRO_FEATURES_mx8 = "wayland"
> > > +REQUIRED_DISTRO_FEATURES:mx8 = "wayland"
> > >
> > > SRC_URI = "${FSL_MIRROR}/${BPN}-${PV}.bin;fsl-eula=true"
> > >
> > > @@ -69,7 +69,7 @@ PACKAGECONFIG[valgrind] = ""
> > >
> > > # Note : If you add a package here, to prevent a naming conflict see
> > > the python_anonymous() futher below
> > > IMX_PACKAGES_GBM = ""
> > > -IMX_PACKAGES_GBM_mx8 = "libgbm-imx libgbm-imx-dev"
> > > +IMX_PACKAGES_GBM:mx8 = "libgbm-imx libgbm-imx-dev"
> > > PACKAGES =+ "libclc-imx libclc-imx-dev \
> > > libgl-imx libgl-imx-dev \
> > > libgles1-imx libgles1-imx-dev \
> > > @@ -140,21 +140,21 @@ python __anonymous() {
> > > }
> > >
> > > IS_MX6SL = "0"
> > > -IS_MX6SL_mx6sl = "1"
> > > +IS_MX6SL:mx6sl = "1"
> > >
> > > IS_MX8 = "0"
> > > -IS_MX8_mx8 = "1"
> > > +IS_MX8:mx8 = "1"
> > >
> > > PACKAGE_FP_TYPE = "hardfp"
> > >
> > > HAS_GBM = "false"
> > > -HAS_GBM_mx8 = "true"
> > > +HAS_GBM:mx8 = "true"
> > >
> > > GLES3_HEADER_REMOVALS = "gl31.h gl32.h"
> > > -GLES3_HEADER_REMOVALS_mx8m = "gl32.h"
> > > -GLES3_HEADER_REMOVALS_mx8mm = "gl31.h gl32.h"
> > > -GLES3_HEADER_REMOVALS_mx8qxp = ""
> > > -GLES3_HEADER_REMOVALS_mx8qm = ""
> > > +GLES3_HEADER_REMOVALS:mx8m = "gl32.h"
> > > +GLES3_HEADER_REMOVALS:mx8mm = "gl31.h gl32.h"
> > > +GLES3_HEADER_REMOVALS:mx8qxp = ""
> > > +GLES3_HEADER_REMOVALS:mx8qm = ""
> > >
> > > do_install () {
> > > install -d ${D}${libdir}
> > > @@ -291,9 +291,9 @@ INSANE_SKIP_libgal-imx += "build-deps"
> > >
> > > FILES_libvsc-imx = "${libdir}/libVSC${SOLIBS}"
> > >
> > > -FILES_libgbm-imx_mx8 = "${libdir}/libgbm*${REALSOLIBS}
> > > ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
> > > -FILES_libgbm-imx-dev_mx8 = "${libdir}/pkgconfig/gbm.pc
> > > ${includedir}/gbm.h"
> > > -RDEPENDS_libgbm-imx_append_mx8 = " libdrm"
> > > +FILES_libgbm-imx:mx8 = "${libdir}/libgbm*${REALSOLIBS}
> > > ${libdir}/libgbm${SOLIBSDEV} ${libdir}/libgbm_viv${SOLIBSDEV}"
> > > +FILES_libgbm-imx-dev:mx8 = "${libdir}/pkgconfig/gbm.pc
> > > ${includedir}/gbm.h"
> > > +RDEPENDS_libgbm-imx:append:mx8 = " libdrm"
> > > INSANE_SKIP_libgbm-imx += "dev-so"
> > >
> > > FILES_libvulkan-imx = "${libdir}/libvulkan_VSI${REALSOLIBS}
> > > ${libdir}/libSPIRV_viv${SOLIBS}"
> > > @@ -358,10 +358,10 @@ INSANE_SKIP_libgc-wayland-protocol-imx += "dev-
> > > so"
> > > FILES_libgc-wayland-protocol-imx =
> > > "${libdir}/libgc_wayland_protocol${REALSOLIBS}
> > > ${libdir}/libgc_wayland_protocol${SOLIBS}"
> > > FILES_libgc-wayland-protocol-imx-dev =
> > > "${libdir}/libgc_wayland_protocol${SOLIBSDEV}
> > > ${libdir}/pkgconfig/gc_wayland_protocol.pc"
> > >
> > > -FILES_imx-gpu-viv-tools = "${bindir}/gmem_info"
> > > +FILES:imx-gpu-viv-tools = "${bindir}/gmem_info"
> > >
> > > -FILES_imx-gpu-viv-demos = "/opt"
> > > -INSANE_SKIP_imx-gpu-viv-demos += "rpaths dev-deps"
> > > +FILES:imx-gpu-viv-demos = "/opt"
> > > +INSANE_SKIP:imx-gpu-viv-demos += "rpaths dev-deps"
> > >
> > > FILES_libnn-imx = "${libdir}/libNN*${SOLIBS}
> > > ${libdir}/libnn*${SOLIBS} ${libdir}/libneuralnetworks${SOLIBS}"
> > > FILES_libnn-imx-dev = "${includedir}/nnrt"
> > > diff --git a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > > b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > > index 5b82b3f4639b..71baa53d82ef 100644
> > > --- a/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > > +++ b/recipes-graphics/libepoxy/libepoxy_1.5.%.bbappend
> > > @@ -1,5 +1,5 @@
> > > # Append EGL_CFLAGS to CFLAGS
> > > -CFLAGS_append_imxgpu = " \
> > > +CFLAGS:append:imxgpu = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-
> > > DEGL_API_FB', d)} \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-
> > > DWL_EGL_PLATFORM', '', d)} \
> > > "
> > > diff --git a/recipes-graphics/libsdl2/libsdl2_%.bbappend b/recipes-
> > > graphics/libsdl2/libsdl2_%.bbappend
> > > index 303ea63a7cf2..af9c97bb6e97 100644
> > > --- a/recipes-graphics/libsdl2/libsdl2_%.bbappend
> > > +++ b/recipes-graphics/libsdl2/libsdl2_%.bbappend
> > > @@ -1,8 +1,8 @@
> > > # what vivante driver does libsdl2 mean? Anyway it fails with
> > > missing functions as
> > > # VIVANTE_Create VIVANTE_GLES_GetProcAddress
> > > VIVANTE_GLES_UnloadLibrary ...
> > > -EXTRA_OECONF_append_imxgpu2d = " --disable-video-vivante"
> > > +EXTRA_OECONF:append:imxgpu2d = " --disable-video-vivante"
> > >
> > > -CFLAGS_append_imxgpu = " -DLINUX \
> > > +CFLAGS:append:imxgpu = " -DLINUX \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', '', '-
> > > DEGL_API_FB', d)} \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', '-
> > > DWL_EGL_PLATFORM', '', d)} \
> > > "
> > > diff --git a/recipes-graphics/mesa/mesa-demos_%.bbappend b/recipes-
> > > graphics/mesa/mesa-demos_%.bbappend
> > > index 301f1b59f125..4b518185119b 100644
> > > --- a/recipes-graphics/mesa/mesa-demos_%.bbappend
> > > +++ b/recipes-graphics/mesa/mesa-demos_%.bbappend
> > > @@ -1,26 +1,26 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > >
> > > -SRC_URI_append_imxgpu = "
> > > file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
> > > +SRC_URI:append:imxgpu = "
> > > file://Replace-glWindowPos2iARB-calls-with-glWindowPos2i.patch \
> > > file://fix-clear-build-break.patch \
> > >
> > > file://Add-OpenVG-demos-to-support-wayland.patch"
> > >
> > > PACKAGECONFIG_REMOVE_IF_2D_ONLY = ""
> > > -PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu2d = "gles1 gles2"
> > > -PACKAGECONFIG_REMOVE_IF_2D_ONLY_imxgpu3d = ""
> > > +PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu2d = "gles1 gles2"
> > > +PACKAGECONFIG_REMOVE_IF_2D_ONLY:imxgpu3d = ""
> > > PACKAGECONFIG_REMOVE_IF_GPU = ""
> > > -PACKAGECONFIG_REMOVE_IF_GPU_imxgpu = " \
> > > +PACKAGECONFIG_REMOVE_IF_GPU:imxgpu = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'glu x11',
> > > '', d)} \
> > > "
> > > -PACKAGECONFIG_remove = " \
> > > +PACKAGECONFIG:remove = " \
> > > ${PACKAGECONFIG_REMOVE_IF_2D_ONLY} \
> > > ${PACKAGECONFIG_REMOVE_IF_GPU} \
> > > "
> > >
> > > PACKAGECONFIG_APPEND_IF_GPU = ""
> > > -PACKAGECONFIG_APPEND_IF_GPU_imxgpu = " \
> > > +PACKAGECONFIG_APPEND_IF_GPU:imxgpu = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland vg',
> > > '', d)} \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glut',
> > > '', d)} \
> > > "
> > > -PACKAGECONFIG_append = " \
> > > +PACKAGECONFIG:append = " \
> > > ${PACKAGECONFIG_APPEND_IF_GPU} \
> > > "
> > > diff --git a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb b/recipes-
> > > graphics/mesa/mesa-etnaviv-env_0.1.bb
> > > index 2a32c448f436..c58c2cf30dc9 100644
> > > --- a/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> > > +++ b/recipes-graphics/mesa/mesa-etnaviv-env_0.1.bb
> > > @@ -12,7 +12,7 @@ SRC_URI = "\
> > > do_configure[noexec] = "1"
> > > do_compile[noexec] = "1"
> > >
> > > -do_install_use-mainline-bsp() {
> > > +do_install:use-mainline-bsp() {
> > > # MESA global envirronment variables
> > >
> > > # systemd
> > > diff --git a/recipes-graphics/mesa/mesa-gl_%.bbappend b/recipes-
> > > graphics/mesa/mesa-gl_%.bbappend
> > > index ca1c8f46d680..dafd27f0a68e 100644
> > > --- a/recipes-graphics/mesa/mesa-gl_%.bbappend
> > > +++ b/recipes-graphics/mesa/mesa-gl_%.bbappend
> > > @@ -1 +1 @@
> > > -COMPATIBLE_MACHINE_imxgpu = "(-)"
> > > +COMPATIBLE_MACHINE:imxgpu = "(-)"
> > > diff --git a/recipes-graphics/mesa/mesa_%.bbappend b/recipes-
> > > graphics/mesa/mesa_%.bbappend
> > > index 423ee63ec638..d0b55cacea4b 100644
> > > --- a/recipes-graphics/mesa/mesa_%.bbappend
> > > +++ b/recipes-graphics/mesa/mesa_%.bbappend
> > > @@ -1,5 +1,5 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > > -SRC_URI_append_use-mainline-bsp = " \
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > > +SRC_URI:append:use-mainline-bsp = " \
> > > file://0001-dri-add-createImageWithModifiers2-interface.patch \
> > > file://0002-dri-add-loader_dri_create_image-helper.patch \
> > >
> > > file://0003-loader-dri3-convert-to-loader_dri_create_image.patch \
> > > @@ -11,11 +11,11 @@ SRC_URI_append_use-mainline-bsp = " \
> > >
> > > file://0009-etnaviv-flush-used-render-buffers-on-context-flush-w.patch
> > > \
> > > "
> > >
> > > -PROVIDES_remove_imxgpu = "virtual/egl"
> > > -PROVIDES_remove_imxgpu3d = "virtual/libgl virtual/libgles1
> > > virtual/libgles2"
> > > +PROVIDES:remove:imxgpu = "virtual/egl"
> > > +PROVIDES:remove:imxgpu3d = "virtual/libgl virtual/libgles1
> > > virtual/libgles2"
> > >
> > > -PACKAGECONFIG_remove_imxgpu = "egl gbm"
> > > -PACKAGECONFIG_remove_imxgpu3d = "gles"
> > > +PACKAGECONFIG:remove:imxgpu = "egl gbm"
> > > +PACKAGECONFIG:remove:imxgpu3d = "gles"
> > >
> > > # FIXME: mesa should support 'x11-no-tls' option
> > > python () {
> > > @@ -28,13 +28,13 @@ python () {
> > > }
> > >
> > > # Enable Etnaviv and Freedreno support
> > > -PACKAGECONFIG_append_use-mainline-bsp = " gallium etnaviv kmsro
> > > freedreno"
> > > +PACKAGECONFIG:append:use-mainline-bsp = " gallium etnaviv kmsro
> > > freedreno"
> > >
> > > # For NXP BSP, GPU drivers don't support dri
> > > -PACKAGECONFIG_remove_imxgpu_use-nxp-bsp = "dri"
> > > +PACKAGECONFIG:remove:imxgpu:use-nxp-bsp = "dri"
> > >
> > > # mainline/etnaviv:
> > > -RRECOMMENDS_${PN}-megadriver_append_use-mainline-bsp = " libdrm-
> > > etnaviv mesa-etnaviv-env"
> > > +RRECOMMENDS_${PN}-megadriver:append:use-mainline-bsp = " libdrm-
> > > etnaviv mesa-etnaviv-env"
> > >
> > > BACKEND = \
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', \
> > > @@ -42,7 +42,7 @@ BACKEND = \
> > > 'fb',
> > > d), d)}"
> > >
> > > # FIXME: Dirty hack to allow use of Vivante GPU libGL binary
> > > -do_install_append_imxgpu3d () {
> > > +do_install:append:imxgpu3d () {
> > > rm -f ${D}${libdir}/libGL.* \
> > > ${D}${includedir}/GL/gl.h \
> > > ${D}${includedir}/GL/glcorearb.h \
> > > @@ -54,6 +54,6 @@ do_install_append_imxgpu3d () {
> > > fi
> > > }
> > >
> > > -do_install_append_imxgpu () {
> > > +do_install:append:imxgpu () {
> > > rm -rf ${D}${includedir}/KHR
> > > }
> > > diff --git a/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > > b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > > index 28e1dc32fcce..1e4d181ce3e5 100644
> > > --- a/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > > +++ b/recipes-graphics/vulkan/vulkan-loader_%.bbappend
> > > @@ -1,3 +1,3 @@
> > > # The i.MX implementation is dynamically loaded, so it requires an
> > > # explicit runtime dependency.
> > > -RRECOMMENDS_${PN}_append_imxgpu = " libvulkan-imx"
> > > +RRECOMMENDS_${PN}:append:imxgpu = " libvulkan-imx"
> > > diff --git a/recipes-graphics/waffle/waffle_%.bbappend b/recipes-
> > > graphics/waffle/waffle_%.bbappend
> > > index 9d090bcfe2b0..380273a8c55c 100644
> > > --- a/recipes-graphics/waffle/waffle_%.bbappend
> > > +++ b/recipes-graphics/waffle/waffle_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > >
> > > SRC_URI += " \
> > > file://0001-meson-Add-missing-wayland-dependency-on-EGL.patch \
> > > @@ -6,11 +6,11 @@ SRC_URI += " \
> > > "
> > >
> > > PACKAGECONFIG_IMXGPU_X11 = ""
> > > -PACKAGECONFIG_IMXGPU_X11_imxgpu3d = "x11-egl glx"
> > > +PACKAGECONFIG_IMXGPU_X11:imxgpu3d = "x11-egl glx"
> > > PACKAGECONFIG_IMXGPU_GBM = "gbm"
> > > -PACKAGECONFIG_IMXGPU_GBM_mx6 = ""
> > > -PACKAGECONFIG_IMXGPU_GBM_mx7 = ""
> > > -PACKAGECONFIG_imxgpu = " \
> > > +PACKAGECONFIG_IMXGPU_GBM:mx6 = ""
> > > +PACKAGECONFIG_IMXGPU_GBM:mx7 = ""
> > > +PACKAGECONFIG:imxgpu = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES',
> > > 'wayland', 'wayland', \
> > > bb.utils.contains('DISTRO_FEATURES', 'x11',
> > > '${PACKAGECONFIG_IMXGPU_X11}', \
> > >
> > > '', d), d)} \
> > > diff --git a/recipes-graphics/wayland/weston-init.bbappend b/recipes-
> > > graphics/wayland/weston-init.bbappend
> > > index ebd982687b19..5710e9b5ecad 100644
> > > --- a/recipes-graphics/wayland/weston-init.bbappend
> > > +++ b/recipes-graphics/wayland/weston-init.bbappend
> > > @@ -1,24 +1,24 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > >
> > > # OpenGL is not required for parts with GPU support for 2D but not
> > > 3D
> > > IMX_REQUIRED_DISTRO_FEATURES_REMOVE = ""
> > > -IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu2d = "opengl"
> > > -IMX_REQUIRED_DISTRO_FEATURES_REMOVE_imxgpu3d = ""
> > > -REQUIRED_DISTRO_FEATURES_remove =
> > > "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
> > > +IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu2d = "opengl"
> > > +IMX_REQUIRED_DISTRO_FEATURES_REMOVE:imxgpu3d = ""
> > > +REQUIRED_DISTRO_FEATURES:remove =
> > > "${IMX_REQUIRED_DISTRO_FEATURES_REMOVE}"
> > >
> > > -SRC_URI_append_mx6sl = " file://weston.config"
> > > +SRC_URI:append:mx6sl = " file://weston.config"
> > >
> > > # To customize weston.ini, start by setting the desired assignment
> > > in weston.ini,
> > > # commented out. For example:
> > > # #xwayland=true
> > > # Then add the assignment to INI_UNCOMMENT_ASSIGNMENTS.
> > > -INI_UNCOMMENT_ASSIGNMENTS_append_imx = " \
> > > +INI_UNCOMMENT_ASSIGNMENTS:append:imx = " \
> > > ${@bb.utils.contains('DISTRO_FEATURES', 'x11 wayland',
> > > 'xwayland=true', '', d)} \
> > > "
> > > -INI_UNCOMMENT_ASSIGNMENTS_append_mx8 = " \
> > > +INI_UNCOMMENT_ASSIGNMENTS:append:mx8 = " \
> > > repaint-window=16 \
> > > "
> > > -INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
> > > +INI_UNCOMMENT_ASSIGNMENTS:append:mx8mq = " \
> > > gbm-format=argb8888 \
> > > \\[shell\\] \
> > > size=1920x1080 \
> > > @@ -27,10 +27,10 @@ INI_UNCOMMENT_ASSIGNMENTS_append_mx8mq = " \
> > > # FIXME: The 8QM and 8QXP SoCs have better performance without G2D
> > > so don't enable it
> > > # Ideally, this should be seamless and Vivante ought to handle it
> > > internally and take the fastest
> > > # rendering code.
> > > -INI_UNCOMMENT_USE_G2D_imxgpu2d ?= "use-g2d=1"
> > > -INI_UNCOMMENT_USE_G2D_mx8qm = ""
> > > -INI_UNCOMMENT_USE_G2D_mx8qxp = ""
> > > -INI_UNCOMMENT_ASSIGNMENTS_append_imxgpu2d = " \
> > > +INI_UNCOMMENT_USE_G2D:imxgpu2d ?= "use-g2d=1"
> > > +INI_UNCOMMENT_USE_G2D:mx8qm = ""
> > > +INI_UNCOMMENT_USE_G2D:mx8qxp = ""
> > > +INI_UNCOMMENT_ASSIGNMENTS:append:imxgpu2d = " \
> > > ${INI_UNCOMMENT_USE_G2D} \
> > > "
> > >
> > > @@ -41,7 +41,7 @@ uncomment() {
> > > sed -i -e 's,^#'"$1"','"$1"',g' $2
> > > }
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > if [ -f "${WORKDIR}/weston.config" ]; then
> > > install -Dm0755 ${WORKDIR}/weston.config
> > > ${D}${sysconfdir}/default/weston
> > > fi
> > > diff --git a/recipes-graphics/wayland/weston_9.0.0.imx.bb b/recipes-
> > > graphics/wayland/weston_9.0.0.imx.bb
> > > index 026f27cebe8b..16607a93c4d2 100644
> > > --- a/recipes-graphics/wayland/weston_9.0.0.imx.bb
> > > +++ b/recipes-graphics/wayland/weston_9.0.0.imx.bb
> > > @@ -20,7 +20,7 @@ SRC_URI = "
> > > https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \
> > >
> > > file://0001-tests-include-fcntl.h-for-open-O_RDWR-O_CLOEXEC-and-.patch
> > > \
> > > "
> > >
> > > -SRC_URI_append_libc-musl = " file://dont-use-plane-add-prop.patch "
> > > +SRC_URI:append:libc-musl = " file://dont-use-plane-add-prop.patch "
> > >
> > > SRC_URI[sha256sum] =
> > > "5cf5d6ce192e0eb15c1fc861a436bf21b5bb3b91dbdabbdebe83e1f83aa098fe"
> > >
> > > @@ -97,7 +97,7 @@ PACKAGECONFIG[shell-ivi] = "-Dshell-ivi=true,-
> > > Dshell-ivi=false"
> > > # JPEG image loading support
> > > PACKAGECONFIG[image-jpeg] = "-Dimage-jpeg=true,-Dimage-jpeg=false,
> > > jpeg"
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > # Weston doesn't need the .la files to load modules, so wipe
> > > them
> > > rm -f ${D}/${libdir}/libweston-${WESTON_MAJOR_VERSION}/*.la
> > >
> > > @@ -160,23 +160,23 @@ S = "${WORKDIR}/git"
> > >
> > > # Disable OpenGL for parts with GPU support for 2D but not 3D
> > > REQUIRED_DISTRO_FEATURES = "opengl"
> > > -REQUIRED_DISTRO_FEATURES_imxgpu2d = ""
> > > -REQUIRED_DISTRO_FEATURES_imxgpu3d = "opengl"
> > > +REQUIRED_DISTRO_FEATURES:imxgpu2d = ""
> > > +REQUIRED_DISTRO_FEATURES:imxgpu3d = "opengl"
> > > PACKAGECONFIG_OPENGL = "opengl"
> > > -PACKAGECONFIG_OPENGL_imxgpu2d = ""
> > > -PACKAGECONFIG_OPENGL_imxgpu3d = "opengl"
> > > +PACKAGECONFIG_OPENGL:imxgpu2d = ""
> > > +PACKAGECONFIG_OPENGL:imxgpu3d = "opengl"
> > >
> > > -PACKAGECONFIG_remove = "wayland x11"
> > > -PACKAGECONFIG_append = " ${@bb.utils.filter('DISTRO_FEATURES',
> > > '${PACKAGECONFIG_OPENGL}', d)}"
> > > +PACKAGECONFIG:remove = "wayland x11"
> > > +PACKAGECONFIG:append = " ${@bb.utils.filter('DISTRO_FEATURES',
> > > '${PACKAGECONFIG_OPENGL}', d)}"
> > >
> > > -PACKAGECONFIG_remove_imxfbdev = "kms"
> > > -PACKAGECONFIG_append_imxfbdev = " fbdev clients"
> > > -PACKAGECONFIG_append_imxgpu = " imxgpu"
> > > -PACKAGECONFIG_append_imxgpu2d = " imxg2d"
> > > +PACKAGECONFIG:remove:imxfbdev = "kms"
> > > +PACKAGECONFIG:append:imxfbdev = " fbdev clients"
> > > +PACKAGECONFIG:append:imxgpu = " imxgpu"
> > > +PACKAGECONFIG:append:imxgpu2d = " imxg2d"
> > >
> > > # Clients support
> > > SIMPLE_CLIENTS = "all"
> > > -SIMPLE_CLIENTS_imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
> > > +SIMPLE_CLIENTS:imxfbdev = "damage,im,egl,shm,touch,dmabuf-v4l"
> > > PACKAGECONFIG[xwayland] = "-Dxwayland=true,-
> > > Dxwayland=false,libxcursor"
> > > PACKAGECONFIG[clients] = "-Dsimple-clients=${SIMPLE_CLIENTS} -Ddemo-
> > > clients=true,-Dsimple-clients= -Ddemo-clients=false"
> > > # Weston with i.MX GPU support
> > > diff --git a/recipes-graphics/xinput-calibrator/pointercal-
> > > xinput_%.bbappend b/recipes-graphics/xinput-calibrator/pointercal-
> > > xinput_%.bbappend
> > > index a9c60f3ec4f9..d112b274a75d 100644
> > > --- a/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> > > +++ b/recipes-graphics/xinput-calibrator/pointercal-xinput_%.bbappend
> > > @@ -1,2 +1,2 @@
> > > # Append path for freescale layer to include bsp pointercal.xinput
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > > diff --git a/recipes-graphics/xorg-driver/xf86-video-imx-
> > > vivante_6.4.0.p0.0.bb b/recipes-graphics/xorg-driver/xf86-video-imx-
> > > vivante_6.4.0.p0.0.bb
> > > index 069008c04479..836a16ba08cc 100644
> > > --- a/recipes-graphics/xorg-driver/xf86-video-imx-
> > > vivante_6.4.0.p0.0.bb
> > > +++ b/recipes-graphics/xorg-driver/xf86-video-imx-
> > > vivante_6.4.0.p0.0.bb
> > > @@ -34,7 +34,7 @@ TARGET_CC_ARCH += "${LDFLAGS}"
> > >
> > > PACKAGES =+ "xserver-xorg-extension-viv-autohdmi"
> > >
> > > -do_install_append () {
> > > +do_install:append () {
> > > install -d ${D}${includedir}
> > > cp -axr ${S}/EXA/src/vivante_gal/vivante_priv.h
> > > ${D}${includedir}
> > > cp -axr ${S}/EXA/src/vivante_gal/vivante_gal.h ${D}${includedir}
> > > diff --git a/recipes-graphics/xorg-xserver/xserver-xf86-
> > > config_%.bbappend b/recipes-graphics/xorg-xserver/xserver-xf86-
> > > config_%.bbappend
> > > index ceb438e37115..3fe677b34770 100644
> > > --- a/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> > > +++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_%.bbappend
> > > @@ -1,2 +1,2 @@
> > > # Append path for freescale layer to include bsp xorg.conf
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > > diff --git a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > > b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > > index 22d950c796cc..34e2ed82377b 100644
> > > --- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > > +++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
> > > @@ -1,7 +1,7 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${BPN}:"
> > >
> > > -SRC_URI_append_use-mainline-bsp = "
> > > file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
> > > -SRC_URI_append_imxgpu = " \
> > > +SRC_URI:append:use-mainline-bsp = "
> > > file://0001-Allow-to-enable-atomic-in-modesetting-DDX.patch"
> > > +SRC_URI:append:imxgpu = " \
> > > file://0003-Remove-check-for-useSIGIO-option.patch \
> > >
> > > file://0001-MGS-5186-Per-Specification-EGL_NATIVE_PIXMAP_KHR-req.patch
> > > \
> > >
> > > file://0001-glamor-glamor_egl.c-EGL_NATIVE_PIXMAP_KHR-do-not-req.patch
> > > \
> > > @@ -10,7 +10,7 @@ SRC_URI_append_imxgpu = " \
> > > "
> > >
> > > IMX_OPENGL_PKGCONFIGS_REMOVE = ""
> > > -IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
> > > -OPENGL_PKGCONFIGS_remove_mx6 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > -OPENGL_PKGCONFIGS_remove_mx7 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > -OPENGL_PKGCONFIGS_remove_imxdrm = "dri glx"
> > > +IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
> > > +OPENGL_PKGCONFIGS:remove:mx6 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > +OPENGL_PKGCONFIGS:remove:mx7 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > +OPENGL_PKGCONFIGS:remove:imxdrm = "dri glx"
> > > diff --git a/recipes-graphics/xwayland/xwayland_%.bbappend b/recipes-
> > > graphics/xwayland/xwayland_%.bbappend
> > > index c26bb20d2caf..b3e79e09182f 100644
> > > --- a/recipes-graphics/xwayland/xwayland_%.bbappend
> > > +++ b/recipes-graphics/xwayland/xwayland_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > IMX_OPENGL_PKGCONFIGS_REMOVE = ""
> > > -IMX_OPENGL_PKGCONFIGS_REMOVE_imxgpu = "glamor"
> > > -OPENGL_PKGCONFIGS_remove_mx6 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > -OPENGL_PKGCONFIGS_remove_mx7 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > +IMX_OPENGL_PKGCONFIGS_REMOVE:imxgpu = "glamor"
> > > +OPENGL_PKGCONFIGS:remove:mx6 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > +OPENGL_PKGCONFIGS:remove:mx7 =
> > > "${IMX_OPENGL_PKGCONFIGS_REMOVE}"
> > > diff --git a/recipes-kernel/ceetm/ceetm_git.bb b/recipes-
> > > kernel/ceetm/ceetm_git.bb
> > > index 2e92ad49e5a4..45c3f19edc1a 100644
> > > --- a/recipes-kernel/ceetm/ceetm_git.bb
> > > +++ b/recipes-kernel/ceetm/ceetm_git.bb
> > > @@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "
> > > file://COPYING;md5=bac620b9883d38a84dfb73ca7122d915"
> > >
> > > SRC_URI = "git://source.codeaurora.org/external/qoriq/qoriq-
> > > components/ceetm;nobranch=1"
> > > SRCREV = "6a7f2ec2091df2f4380cb8d25a36c399aed5af1b"
> > > -SRC_URI_append = " file://0001-Makefile-update-CFLAGS.patch \
> > > +SRC_URI:append = " file://0001-Makefile-update-CFLAGS.patch \
> > > file://0001-use-new-api-tc_print_rate.patch \
> > > "
> > > DEPENDS = "iproute2"
> > > diff --git a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > > b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > > index feddc8faac80..36e2065db7c4 100644
> > > --- a/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > > +++ b/recipes-kernel/kernel-modules/kernel-module-ar_git.bb
> > > @@ -14,7 +14,7 @@ export KERNEL_PATH
> > >
> > > INHIBIT_PACKAGE_STRIP = "1"
> > >
> > > -do_compile_prepend() {
> > > +do_compile:prepend() {
> > > sed -i -e 's,EXTRA_CFLAGS += -I$(PWD),EXTRA_CFLAGS += -I${S},'
> > > ${S}/armodule/source/Makefile
> > > }
> > >
> > > diff --git a/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > > b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > > index 350ba186aeb2..903c53a48731 100644
> > > --- a/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > > +++ b/recipes-kernel/kernel-modules/kernel-module-ipc.inc
> > > @@ -11,7 +11,7 @@ SRCREV = "74d662707558290f070f9589177db730444bc435"
> > > S = "${WORKDIR}/git"
> > >
> > > do_configure[depends] += "virtual/kernel:do_shared_workdir"
> > > -do_compile_prepend () {
> > > +do_compile:prepend () {
> > > cd ${S}/kernel
> > > }
> > >
> > > diff --git a/recipes-kernel/kernel-modules/kernel-module-qcacld-
> > > lea.inc b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> > > index 0b23a47c04bb..a7b8a4e68ce7 100644
> > > --- a/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> > > +++ b/recipes-kernel/kernel-modules/kernel-module-qcacld-lea.inc
> > > @@ -20,4 +20,4 @@ EXTRA_OEMAKE += " \
> > > "
> > >
> > > COMPATIBLE_MACHINE = "(imx)"
> > > -COMPATIBLE_HOST_libc-musl = 'null'
> > > +COMPATIBLE_HOST:libc-musl = 'null'
> > > diff --git a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > > b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > > index 63527d1324cc..95dd72fb894c 100644
> > > --- a/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > > +++ b/recipes-kernel/linux/linux-fslc-lts-mfgtool_5.10.bb
> > > @@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by
> > > the Freescale Community \
> > > that produces a Manufacturing Tool compatible Linux Kernel to be
> > > used in updater \
> > > environment"
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
> > > require linux-fslc-lts_${PV}.bb
> > > require linux-mfgtool.inc
> > >
> > > diff --git a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > > b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > > index c155ebb969ed..09d35c9152ea 100644
> > > --- a/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > > +++ b/recipes-kernel/linux/linux-fslc-mfgtool_5.12.bb
> > > @@ -6,7 +6,7 @@ DESCRIPTION = "Linux Kernel provided and supported by
> > > the Freescale Community \
> > > that produces a Manufacturing Tool compatible Linux Kernel to be
> > > used in updater \
> > > environment"
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-fslc:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-fslc:"
> > > require linux-fslc_${PV}.bb
> > > require linux-mfgtool.inc
> > >
> > > diff --git a/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > > b/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > > index c656fa557e26..05e8b12c5bfe 100644
> > > --- a/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > > +++ b/recipes-kernel/linux/linux-imx-headers_5.10.bb
> > > @@ -75,4 +75,4 @@ PACKAGE_ARCH = "${MACHINE_SOCARCH}"
> > > # Restrict this recipe to NXP BSP only, this recipe is not
> > > compatible
> > > # with mainline BSP
> > > COMPATIBLE_HOST = '(null)'
> > > -COMPATIBLE_HOST_use-nxp-bsp = '.*'
> > > +COMPATIBLE_HOST:use-nxp-bsp = '.*'
> > > diff --git a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > > b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > > index 0a9f5259ed94..311245b19b6d 100644
> > > --- a/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > > +++ b/recipes-kernel/linux/linux-imx-mfgtool_5.10.bb
> > > @@ -5,7 +5,7 @@ SUMMARY = "Produces a Manufacturing Tool compatible
> > > Linux Kernel"
> > > DESCRIPTION = "Linux Kernel provided and supported by Freescale that
> > > produces a \
> > > Manufacturing Tool compatible Linux Kernel to be used in updater
> > > environment"
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/linux-imx:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/linux-imx:"
> > > require linux-imx_${PV}.bb
> > > require linux-mfgtool.inc
> > >
> > > diff --git a/recipes-kernel/linux/linux-qoriq.inc b/recipes-
> > > kernel/linux/linux-qoriq.inc
> > > index 4d134b476599..2333990fb79c 100644
> > > --- a/recipes-kernel/linux/linux-qoriq.inc
> > > +++ b/recipes-kernel/linux/linux-qoriq.inc
> > > @@ -7,12 +7,12 @@ LICENSE = "GPLv2"
> > >
> > > S = "${WORKDIR}/git"
> > >
> > > -DEPENDS_append = " libgcc"
> > > +DEPENDS:append = " libgcc"
> > > # not put Images into /boot of rootfs, install kernel-image if
> > > needed
> > > RDEPENDS_${KERNEL_PACKAGE_NAME}-base = ""
> > >
> > > -KERNEL_CC_append = " ${TOOLCHAIN_OPTIONS}"
> > > -KERNEL_LD_append = " ${TOOLCHAIN_OPTIONS}"
> > > +KERNEL_CC:append = " ${TOOLCHAIN_OPTIONS}"
> > > +KERNEL_LD:append = " ${TOOLCHAIN_OPTIONS}"
> > > KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
> > >
> > > ZIMAGE_BASE_NAME = "zImage-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-
> > > ${DATETIME}"
> > > @@ -24,9 +24,9 @@ PV = "${LINUX_VERSION}+git${SRCPV}"
> > > SCMVERSION ?= "y"
> > > LOCALVERSION = ""
> > > DELTA_KERNEL_DEFCONFIG ?= ""
> > > -DELTA_KERNEL_DEFCONFIG_prepend_qoriq-arm64 = "lsdk.config "
> > > -DELTA_KERNEL_DEFCONFIG_prepend_fsl-lsch2-32b = "multi_v7_lpae.config
> > > multi_v8.config lsdk.config "
> > > -DELTA_KERNEL_DEFCONFIG_prepend_ls102xa = "multi_v7_lpae.config
> > > lsdk.config "
> > > +DELTA_KERNEL_DEFCONFIG:prepend:qoriq-arm64 = "lsdk.config "
> > > +DELTA_KERNEL_DEFCONFIG:prepend:fsl-lsch2-32b = "multi_v7_lpae.config
> > > multi_v8.config lsdk.config "
> > > +DELTA_KERNEL_DEFCONFIG:prepend:ls102xa = "multi_v7_lpae.config
> > > lsdk.config "
> > >
> > > do_merge_delta_config[depends] +=
> > > "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot bison-
> > > native:do_populate_sysroot"
> > > do_merge_delta_config[dirs] = "${B}"
> > > @@ -56,11 +56,11 @@ do_merge_delta_config() {
> > > addtask merge_delta_config before do_kernel_localversion after
> > > do_patch
> > >
> > > # The link of dts folder is needed for 32b compile of aarch64
> > > targets(e.g. ls1043ardb-32b)
> > > -do_compile_prepend_fsl-lsch2-32b() {
> > > +do_compile:prepend:fsl-lsch2-32b() {
> > > ln -sfT ${STAGING_KERNEL_DIR}/arch/arm64/boot/dts/freescale
> > > ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
> > > }
> > >
> > > -do_install_prepend_fsl-lsch2-32b() {
> > > +do_install:prepend:fsl-lsch2-32b() {
> > > rm -f ${STAGING_KERNEL_DIR}/arch/arm/boot/dts/freescale
> > > }
> > >
> > > diff --git a/recipes-multimedia/alsa/alsa-lib_%.bbappend b/recipes-
> > > multimedia/alsa/alsa-lib_%.bbappend
> > > index 80c11f33204f..d76c45d1e162 100644
> > > --- a/recipes-multimedia/alsa/alsa-lib_%.bbappend
> > > +++ b/recipes-multimedia/alsa/alsa-lib_%.bbappend
> > > @@ -1,4 +1,4 @@
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
> > >
> > > IMX_PATCH = " \
> > > file://0001-add-conf-for-multichannel-support-in-imx.patch \
> > > @@ -6,6 +6,6 @@ IMX_PATCH = " \
> > > file://0005-add-ak4458-conf-for-multichannel-support.patch \
> > > file://0006-add-conf-for-iMX-XCVR-sound-card.patch \
> > > "
> > > -SRC_URI_append_imx = "${IMX_PATCH}"
> > > +SRC_URI:append:imx = "${IMX_PATCH}"
> > >
> > > -PACKAGE_ARCH_imx = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:imx = "${MACHINE_SOCARCH}"
> > > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-
> > > libav_1.16.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-
> > > libav_1.16.0.bb
> > > index 3f1ec99d9560..cf640e13779e 100644
> > > --- a/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> > > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-libav_1.16.0.bb
> > > @@ -50,8 +50,8 @@ LIBAV_EXTRA_CONFIGURE_COMMON_ARG = "--target-
> > > os=linux \
> > > --cross-prefix='${HOST_PREFIX}'"
> > >
> > > # Disable assembly optimizations for X32, as this libav lacks the
> > > support
> > > -PACKAGECONFIG_remove_linux-gnux32 = "yasm"
> > > -LIBAV_EXTRA_CONFIGURE_COMMON_ARG_append_linux-gnux32 = " --disable-
> > > asm"
> > > +PACKAGECONFIG:remove:linux-gnux32 = "yasm"
> > > +LIBAV_EXTRA_CONFIGURE_COMMON_ARG:append:linux-gnux32 = " --disable-
> > > asm"
> > >
> > > LIBAV_EXTRA_CONFIGURE_COMMON = \
> > > '${LIBAV_EXTRA_CONFIGURE}="${LIBAV_EXTRA_CONFIGURE_COMMON_ARG}"'
> > > @@ -63,8 +63,8 @@ FILES_${PN}-dev += "${libdir}/gstreamer-1.0/*.la"
> > > FILES_${PN}-staticdev += "${libdir}/gstreamer-1.0/*.a"
> > >
> > > # http://errors.yoctoproject.org/Errors/Details/20493/
> > > -ARM_INSTRUCTION_SET_armv4 = "arm"
> > > -ARM_INSTRUCTION_SET_armv5 = "arm"
> > > +ARM_INSTRUCTION_SET:armv4 = "arm"
> > > +ARM_INSTRUCTION_SET:armv5 = "arm"
> > >
> > > # ffmpeg/libav disables PIC on some platforms (e.g. x86-32)
> > > INSANE_SKIP_${PN} = "textrel"
> > > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > bad_1.16.3.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-
> > > plugins-bad_1.16.3.imx.bb
> > > index 6925611ac080..376764583179 100644
> > > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > bad_1.16.3.imx.bb
> > > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > bad_1.16.3.imx.bb
> > > @@ -1,14 +1,14 @@
> > > require recipes-multimedia/gstreamer/gstreamer1.0-plugins-common.inc
> > >
> > > -DEPENDS_append_imxgpu2d = " virtual/libg2d"
> > > -DEPENDS_append_mx8 = " libdrm"
> > > +DEPENDS:append:imxgpu2d = " virtual/libg2d"
> > > +DEPENDS:append:mx8 = " libdrm"
> > >
> > > -PACKAGECONFIG_append_mx8 = " kms"
> > > +PACKAGECONFIG:append:mx8 = " kms"
> > >
> > > DEFAULT_PREFERENCE = "-1"
> > >
> > > -PACKAGE_ARCH_imxpxp = "${MACHINE_SOCARCH}"
> > > -PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:imxpxp = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
> > >
> > > GST1.0-PLUGINS-BAD_SRC ?=
> > > "gitsm://source.codeaurora.org/external/imx/gst-plugins-
> > > bad.git;protocol=https"
> > > SRCBRANCH = "MM_04.05.07_2011_L5.4.70"
> > > @@ -37,7 +37,7 @@ DEPENDS += "gstreamer1.0-plugins-base"
> > > inherit gobject-introspection
> > >
> > > PACKAGECONFIG_GL ?= "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gl', '', d)}"
> > > -PACKAGECONFIG_GL_imxpxp = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gles2', '', d)}"
> > > +PACKAGECONFIG_GL:imxpxp = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gles2', '', d)}"
> > >
> > > PACKAGECONFIG ??= " \
> > > ${GSTREAMER_ORC} \
> > > @@ -163,8 +163,8 @@ EXTRA_OEMESON += " \
> > >
> > > export OPENCV_PREFIX = "${STAGING_DIR_TARGET}${prefix}"
> > >
> > > -ARM_INSTRUCTION_SET_armv4 = "arm"
> > > -ARM_INSTRUCTION_SET_armv5 = "arm"
> > > +ARM_INSTRUCTION_SET:armv4 = "arm"
> > > +ARM_INSTRUCTION_SET:armv5 = "arm"
> > >
> > > FILES_${PN}-freeverb += "${datadir}/gstreamer-
> > > 1.0/presets/GstFreeverb.prs"
> > > FILES_${PN}-opencv += "${datadir}/gst-plugins-bad/1.0/opencv*"
> > > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > base_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-
> > > plugins-base_1.16.%.bbappend
> > > index d92bdf3ca3c2..1c62f31dc227 100644
> > > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > base_1.16.%.bbappend
> > > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > base_1.16.%.bbappend
> > > @@ -1,5 +1,5 @@
> > > -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl x11', 'opengl', '', d)}"
> > > -PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gles2 egl', '', d)}"
> > > +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl x11', 'opengl', '', d)}"
> > > +PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gles2 egl', '', d)}"
> > >
> > > # For mainline BSP we need to enable 'gbm' Window system
> > > -PACKAGECONFIG_GL_use-mainline-bsp =
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm',
> > > '', d)}"
> > > +PACKAGECONFIG_GL:use-mainline-bsp =
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl gbm',
> > > '', d)}"
> > > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > base_1.16.2.imx.bb b/recipes-multimedia/gstreamer/gstreamer1.0-
> > > plugins-base_1.16.2.imx.bb
> > > index db0b740fa22b..01db6125d67d 100644
> > > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > base_1.16.2.imx.bb
> > > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > base_1.16.2.imx.bb
> > > @@ -20,7 +20,7 @@ SRC_URI = "${GST1.0-PLUGINS-
> > > BASE_SRC};branch=${SRCBRANCH} \
> > > S = "${WORKDIR}/git"
> > >
> > > DEPENDS += "iso-codes util-linux zlib"
> > > -DEPENDS_append_imxgpu2d = " virtual/libg2d"
> > > +DEPENDS:append:imxgpu2d = " virtual/libg2d"
> > >
> > > inherit use-imx-headers gobject-introspection gtk-doc
> > >
> > > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > good_1.16.%.bbappend b/recipes-multimedia/gstreamer/gstreamer1.0-
> > > plugins-good_1.16.%.bbappend
> > > index 8565c6a53377..7e72cdaa2273 100644
> > > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > good_1.16.%.bbappend
> > > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > good_1.16.%.bbappend
> > > @@ -1,3 +1,3 @@
> > > -PACKAGECONFIG_GL_imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl x11', 'opengl', '', d)}"
> > > -PACKAGECONFIG_GL_imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gles2 egl', '', d)}"
> > > -PACKAGECONFIG_GL_use-mainline-bsp =
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '',
> > > d)}"
> > > +PACKAGECONFIG_GL:imxgpu2d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl x11', 'opengl', '', d)}"
> > > +PACKAGECONFIG_GL:imxgpu3d = "${@bb.utils.contains('DISTRO_FEATURES',
> > > 'opengl', 'gles2 egl', '', d)}"
> > > +PACKAGECONFIG_GL:use-mainline-bsp =
> > > "${@bb.utils.contains('DISTRO_FEATURES', 'opengl', 'gles2 egl', '',
> > > d)}"
> > > diff --git a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > imx_2.0.0.bb b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-
> > > imx_2.0.0.bb
> > > index 7c6025dd900e..439c4430f407 100644
> > > --- a/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> > > +++ b/recipes-multimedia/gstreamer/gstreamer1.0-plugins-imx_2.0.0.bb
> > > @@ -28,22 +28,22 @@ inherit pkgconfig meson use-imx-headers
> > > # is needed to improve performance.
> > > LIBG2D_DPU_OPTION = "-Dg2d-based-on-dpu=false"
> > > LIBG2D_DEPENDENCIES = "virtual/libg2d"
> > > -LIBG2D_DPU_OPTION_imxdpu = "-Dg2d-based-on-dpu=true"
> > > -LIBG2D_DEPENDENCIES_imxdpu = "virtual/libg2d libdrm"
> > > +LIBG2D_DPU_OPTION:imxdpu = "-Dg2d-based-on-dpu=true"
> > > +LIBG2D_DEPENDENCIES:imxdpu = "virtual/libg2d libdrm"
> > >
> > > EXTRA_OEMESON += "-Dimx-headers-path=${STAGING_INCDIR_IMX}"
> > >
> > > PACKAGECONFIG ?= "uniaudiodec"
> > > -PACKAGECONFIG_append_imxgpu2d = " g2d"
> > > -PACKAGECONFIG_append_imxvpu = " vpu"
> > > -PACKAGECONFIG_append_imxipu = " ipu"
> > > -PACKAGECONFIG_append_imxpxp = " pxp"
> > > +PACKAGECONFIG:append:imxgpu2d = " g2d"
> > > +PACKAGECONFIG:append:imxvpu = " vpu"
> > > +PACKAGECONFIG:append:imxipu = " ipu"
> > > +PACKAGECONFIG:append:imxpxp = " pxp"
> > > # The custom imxv4l2 elements are only available on the i.MX6.
> > > # The 2D blitter sinks require an MXC framebuffer, which
> > > # is not available anymore on the i.MX8 (since these SoCs
> > > # now use KMS instead of the old Linux framebuffer).
> > > -PACKAGECONFIG_append_mx6 = " imx2dvideosink v4l2"
> > > -PACKAGECONFIG_append_mx7 = " imx2dvideosink"
> > > +PACKAGECONFIG:append:mx6 = " imx2dvideosink v4l2"
> > > +PACKAGECONFIG:append:mx7 = " imx2dvideosink"
> > >
> > > PACKAGECONFIG[g2d] = "-Dg2d=enabled ${LIBG2D_DPU_OPTION},-
> > > Dg2d=disabled,${LIBG2D_DEPENDENCIES}"
> > > PACKAGECONFIG[pxp] = "-Dpxp=enabled,-Dpxp=disabled,"
> > > diff --git a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > > b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > > index c8bb6cd8a45a..9f58aa64d5dc 100644
> > > --- a/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > > +++ b/recipes-multimedia/gstreamer/imx-gst1.0-plugin_4.5.7.bb
> > > @@ -8,9 +8,9 @@ LICENSE = "GPLv2 & LGPLv2 & LGPLv2.1"
> > > SECTION = "multimedia"
> > >
> > > DEPENDS = "imx-codec imx-parser gstreamer1.0 gstreamer1.0-plugins-
> > > base gstreamer1.0-plugins-bad"
> > > -DEPENDS_append_mx6 = " imx-lib"
> > > -DEPENDS_append_mx7 = " imx-lib"
> > > -DEPENDS_append_imxvpu = " imx-vpuwrap libdrm"
> > > +DEPENDS:append:mx6 = " imx-lib"
> > > +DEPENDS:append:mx7 = " imx-lib"
> > > +DEPENDS:append:imxvpu = " imx-vpuwrap libdrm"
> > >
> > > # For backwards compatibility
> > > RREPLACES_${PN} = "gst1.0-fsl-plugin"
> > > @@ -31,14 +31,14 @@ S = "${WORKDIR}/git"
> > >
> > > inherit autotools pkgconfig use-imx-headers
> > >
> > > -PLATFORM_mx6 = "MX6"
> > > -PLATFORM_mx6sl = "MX6SL"
> > > -PLATFORM_mx6sx = "MX6SX"
> > > -PLATFORM_mx6ul = "MX6UL"
> > > -PLATFORM_mx6sll = "MX6SLL"
> > > -PLATFORM_mx7= "MX7D"
> > > -PLATFORM_mx7ulp= "MX7ULP"
> > > -PLATFORM_mx8 = "MX8"
> > > +PLATFORM:mx6 = "MX6"
> > > +PLATFORM:mx6sl = "MX6SL"
> > > +PLATFORM:mx6sx = "MX6SX"
> > > +PLATFORM:mx6ul = "MX6UL"
> > > +PLATFORM:mx6sll = "MX6SLL"
> > > +PLATFORM:mx7= "MX7D"
> > > +PLATFORM:mx7ulp= "MX7ULP"
> > > +PLATFORM:mx8 = "MX8"
> > >
> > > # Todo add a mechanism to map possible build targets
> > > EXTRA_OECONF = "PLATFORM=${PLATFORM} \
> > > @@ -55,7 +55,7 @@ RDEPENDS_${PN} += "imx-parser ${BEEP_RDEPENDS}
> > > gstreamer1.0-plugins-good-id3demu
> > > # overlaysink rely on G2D,
> > > # cannot be supported on i.MX6SLL & i.MX6UL & i.MX6ULL & i.MX7D
> > > PACKAGECONFIG ?= ""
> > > -PACKAGECONFIG_imxgpu2d = "overlaysink"
> > > +PACKAGECONFIG:imxgpu2d = "overlaysink"
> > >
> > >
> > > # FIXME: Add all features
> > > diff --git a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > > b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > > index 76a52f26cb64..4bb76030ed62 100644
> > > --- a/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > > +++ b/recipes-multimedia/imx-codec/imx-codec_4.5.7.bb
> > > @@ -21,14 +21,14 @@ EXTRA_OECONF =
> > > "${@bb.utils.contains('TUNE_FEATURES', 'aarch64', '--enable-armv8
> > > bb.utils.contains('TUNE_FEATURES',
> > > 'callconvention-hard', '--enable-fhw', '', d), d)}"
> > >
> > > PACKAGECONFIG ?= ""
> > > -PACKAGECONFIG_imxvpu = "vpu"
> > > +PACKAGECONFIG:imxvpu = "vpu"
> > >
> > > # We need to ensure we don't have '-src' package overrided
> > > PACKAGE_DEBUG_SPLIT_STYLE = 'debug-without-src'
> > >
> > > PACKAGECONFIG[vpu] = "--enable-vpu,--disable-vpu,virtual/imxvpu"
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > # LTIB move the files around or gst-fsl-plugin won't find them
> > > for p in $(find ${D}${libdir}/imx-mm -mindepth 2 -maxdepth 2 -
> > > not -type d); do
> > > mv $p ${D}${libdir}
> > > @@ -85,7 +85,7 @@ python __set_metapkg_rdepends() {
> > > codec_pkgs = oe.utils.packages_filter_out_system(d)
> > > codec_pkgs = filter(lambda x: x not in ['imx-codec-test-bin',
> > > 'imx-codec-test-source'],
> > > codec_pkgs)
> > > - d.appendVar('RDEPENDS_imx-codec-meta', ' ' + '
> > > '.join(codec_pkgs))
> > > + d.appendVar('RDEPENDS:imx-codec-meta', ' ' + '
> > > '.join(codec_pkgs))
> > > }
> > >
> > > PACKAGESPLITFUNCS =+ "__split_libfslcodec_plugins
> > > __set_metapkg_rdepends"
> > > diff --git a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > > b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > > index 2b0282351840..f77e33f76d07 100644
> > > --- a/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > > +++ b/recipes-multimedia/imx-vpuwrap/imx-vpuwrap_4.5.7.bb
> > > @@ -8,7 +8,7 @@ SECTION = "multimedia"
> > > LIC_FILES_CHKSUM = "
> > > file://COPYING;md5=228c72f2a91452b8a03c4cab30f30ef9"
> > >
> > > DEPENDS = "virtual/imxvpu"
> > > -DEPENDS_append_mx8mp = " imx-vpu-hantro-vc"
> > > +DEPENDS:append:mx8mp = " imx-vpu-hantro-vc"
> > >
> > > SRC_URI = "git://github.com/NXP/imx-
> > > vpuwrap.git;protocol=https;branch=${SRCBRANCH}"
> > >
> > > @@ -19,7 +19,7 @@ S = "${WORKDIR}/git"
> > >
> > > inherit autotools pkgconfig
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > # FIXME: Drop examples for now
> > > rm -r ${D}${datadir}
> > > }
> > > diff --git a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > > b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > > index f66eff27568c..372d78dcb859 100644
> > > --- a/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > > +++ b/recipes-multimedia/libimxvpuapi/libimxvpuapi2_2.2.0.bb
> > > @@ -15,10 +15,10 @@ S = "${WORKDIR}/git"
> > >
> > > inherit waf pkgconfig use-imx-headers
> > >
> > > -IMX_PLATFORM_mx6 = "imx6"
> > > -IMX_PLATFORM_mx8mq = "imx8m"
> > > -IMX_PLATFORM_mx8mm = "imx8mm"
> > > -IMX_PLATFORM_mx8mp = "imx8mm"
> > > +IMX_PLATFORM:mx6 = "imx6"
> > > +IMX_PLATFORM:mx8mq = "imx8m"
> > > +IMX_PLATFORM:mx8mm = "imx8mm"
> > > +IMX_PLATFORM:mx8mp = "imx8mm"
> > >
> > > EXTRA_OECONF = "--imx-platform=${IMX_PLATFORM} --libdir=${libdir} --
> > > imx-headers=${STAGING_INCDIR_IMX} --sysroot-path=${RECIPE_SYSROOT}"
> > >
> > > diff --git a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > > b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > > index 78a17864724a..ae69be4c8601 100644
> > > --- a/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > > +++ b/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
> > > @@ -1,21 +1,21 @@
> > >
> > > -CACHED_CONFIGUREVARS_append_mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
> > > +CACHED_CONFIGUREVARS:append:mx6 = " ax_cv_PTHREAD_PRIO_INHERIT=no"
> > >
> > > -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/imx:"
> > > +FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}/imx:"
> > >
> > > -SRC_URI_append_mx6 = " file://daemon.conf file://default.pa"
> > > -SRC_URI_append_mx7 = " file://daemon.conf file://default.pa \
> > > +SRC_URI:append:mx6 = " file://daemon.conf file://default.pa"
> > > +SRC_URI:append:mx7 = " file://daemon.conf file://default.pa \
> > >
> > > file://pulseaudio-remove-the-control-for-speaker-headphone-widge.patch
> > > \
> > > "
> > > -SRC_URI_append_mx8 = " file://daemon.conf file://default.pa"
> > > +SRC_URI:append:mx8 = " file://daemon.conf file://default.pa"
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > if [ -e "${WORKDIR}/daemon.conf" ] && [ -e
> > > "${WORKDIR}/default.pa" ]; then
> > > install -m 0644 ${WORKDIR}/daemon.conf
> > > ${D}${sysconfdir}/pulse/daemon.conf
> > > install -m 0644 ${WORKDIR}/default.pa
> > > ${D}${sysconfdir}/pulse/default.pa
> > > fi
> > > }
> > >
> > > -PACKAGE_ARCH_mx6 = "${MACHINE_SOCARCH}"
> > > -PACKAGE_ARCH_mx7 = "${MACHINE_SOCARCH}"
> > > -PACKAGE_ARCH_mx8 = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:mx6 = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:mx7 = "${MACHINE_SOCARCH}"
> > > +PACKAGE_ARCH:mx8 = "${MACHINE_SOCARCH}"
> > > diff --git a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > > b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > > index 58b6b8a45b18..b2ac77483ef8 100644
> > > --- a/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > > +++ b/recipes-security/optee-imx/optee-client_3.10.0.imx.bb
> > > @@ -21,8 +21,8 @@ inherit python3native systemd
> > > SYSTEMD_SERVICE_${PN} = "tee-supplicant.service"
> > >
> > > OPTEE_ARCH ?= "arm32"
> > > -OPTEE_ARCH_armv7a = "arm32"
> > > -OPTEE_ARCH_aarch64 = "arm64"
> > > +OPTEE_ARCH:armv7a = "arm32"
> > > +OPTEE_ARCH:aarch64 = "arm64"
> > >
> > > EXTRA_OEMAKE = "ARCH=${OPTEE_ARCH} O=${B}"
> > >
> > > diff --git a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > > b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > > index 712b1aa69046..c0b3b7631269 100644
> > > --- a/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > > +++ b/recipes-security/optee-imx/optee-os_3.10.0.imx.bb
> > > @@ -22,23 +22,23 @@ inherit deploy python3native autotools
> > >
> > > # The platform flavor corresponds to the Yocto machine without the
> > > leading 'i'.
> > > PLATFORM_FLAVOR = "${@d.getVar('MACHINE')[1:]}"
> > > -PLATFORM_FLAVOR_imx6qpdlsolox = "mx6qsabresd"
> > > -PLATFORM_FLAVOR_imx6ul7d = "mx6ulevk"
> > > -PLATFORM_FLAVOR_imx6ull14x14evk = "mx6ullevk"
> > > -PLATFORM_FLAVOR_imx6ull9x9evk = "mx6ullevk"
> > > -PLATFORM_FLAVOR_imx6ulz-14x14-evk = "mx6ulzevk"
> > > -PLATFORM_FLAVOR_mx8mq = "mx8mqevk"
> > > -PLATFORM_FLAVOR_mx8mm = "mx8mmevk"
> > > -PLATFORM_FLAVOR_mx8mn = "mx8mnevk"
> > > -PLATFORM_FLAVOR_mx8mp = "mx8mpevk"
> > > -PLATFORM_FLAVOR_mx8qm = "mx8qmmek"
> > > -PLATFORM_FLAVOR_mx8qxp = "mx8qxpmek"
> > > -PLATFORM_FLAVOR_mx8dx = "mx8dxmek"
> > > -PLATFORM_FLAVOR_mx8dxl = "mx8dxlevk"
> > > +PLATFORM_FLAVOR:imx6qpdlsolox = "mx6qsabresd"
> > > +PLATFORM_FLAVOR:imx6ul7d = "mx6ulevk"
> > > +PLATFORM_FLAVOR:imx6ull14x14evk = "mx6ullevk"
> > > +PLATFORM_FLAVOR:imx6ull9x9evk = "mx6ullevk"
> > > +PLATFORM_FLAVOR:imx6ulz-14x14-evk = "mx6ulzevk"
> > > +PLATFORM_FLAVOR:mx8mq = "mx8mqevk"
> > > +PLATFORM_FLAVOR:mx8mm = "mx8mmevk"
> > > +PLATFORM_FLAVOR:mx8mn = "mx8mnevk"
> > > +PLATFORM_FLAVOR:mx8mp = "mx8mpevk"
> > > +PLATFORM_FLAVOR:mx8qm = "mx8qmmek"
> > > +PLATFORM_FLAVOR:mx8qxp = "mx8qxpmek"
> > > +PLATFORM_FLAVOR:mx8dx = "mx8dxmek"
> > > +PLATFORM_FLAVOR:mx8dxl = "mx8dxlevk"
> > >
> > > OPTEE_ARCH ?= "arm32"
> > > -OPTEE_ARCH_armv7a = "arm32"
> > > -OPTEE_ARCH_aarch64 = "arm64"
> > > +OPTEE_ARCH:armv7a = "arm32"
> > > +OPTEE_ARCH:aarch64 = "arm64"
> > >
> > > # Optee-os can be built for 32 bits and 64 bits at the same time
> > > # as long as the compilers are correctly defined.
> > > diff --git a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > > b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > > index a8a1b245e496..4a6aec56dd45 100644
> > > --- a/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > > +++ b/recipes-security/optee-imx/optee-test_3.10.0.imx.bb
> > > @@ -20,11 +20,11 @@ SRCREV =
> > > "0c998f42a3fb87b9f2929955cf4b0116cc515091"
> > > inherit python3native
> > >
> > > OPTEE_ARCH ?= "arm32"
> > > -OPTEE_ARCH_armv7a = "arm32"
> > > -OPTEE_ARCH_aarch64 = "arm64"
> > > +OPTEE_ARCH:armv7a = "arm32"
> > > +OPTEE_ARCH:aarch64 = "arm64"
> > >
> > > TA_DEV_KIT_DIR_arm = "${STAGING_INCDIR}/optee/export-user_ta_arm32/"
> > > -TA_DEV_KIT_DIR_aarch64 = "${STAGING_INCDIR}/optee/export-
> > > user_ta_arm64/"
> > > +TA_DEV_KIT_DIR:aarch64 = "${STAGING_INCDIR}/optee/export-
> > > user_ta_arm64/"
> > >
> > > CFLAGS += "--sysroot=${STAGING_DIR_HOST}"
> > > CXXFLAGS += "--sysroot=${STAGING_DIR_HOST}"
> > > diff --git a/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > > b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > > index b8d764ff5e12..556f13518d7e 100644
> > > --- a/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > > +++ b/recipes-security/optee/optee-os-qoriq_3.8.0.bb
> > > @@ -19,9 +19,9 @@ SRCREV = "0cb01f7f6aee552ead49990c06f69f73f459cc65"
> > > S = "${WORKDIR}/git"
> > >
> > > OPTEEMACHINE ?= "${MACHINE}"
> > > -OPTEEMACHINE_ls1088ardb-pb = "ls1088ardb"
> > > -OPTEEMACHINE_ls1046afrwy = "ls1046ardb"
> > > -OPTEEMACHINE_lx2162aqds = "lx2160aqds"
> > > +OPTEEMACHINE:ls1088ardb-pb = "ls1088ardb"
> > > +OPTEEMACHINE:ls1046afrwy = "ls1046ardb"
> > > +OPTEEMACHINE:lx2162aqds = "lx2160aqds"
> > >
> > > EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE} CFG_ARM64_core=y \
> > > ARCH=arm \
> > > @@ -31,10 +31,10 @@ EXTRA_OEMAKE = "PLATFORM=ls-${OPTEEMACHINE}
> > > CFG_ARM64_core=y \
> > > LDFLAGS= \
> > > LIBGCC_LOCATE_CFLAGS=--sysroot=${STAGING_DIR_HOST} \
> > > "
> > > -EXTRA_OEMAKE_append_lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-
> > > lx2160a-qds.dts CFG_EMBED_DT=y"
> > > +EXTRA_OEMAKE:append:lx2162aqds = " CFG_EMBED_DTB_SOURCE_FILE=fsl-
> > > lx2160a-qds.dts CFG_EMBED_DT=y"
> > >
> > > -OPTEE_ARCH_armv7a = "arm32"
> > > -OPTEE_ARCH_aarch64 = "arm64"
> > > +OPTEE_ARCH:armv7a = "arm32"
> > > +OPTEE_ARCH:aarch64 = "arm64"
> > >
> > > do_compile() {
> > > unset LDFLAGS
> > > diff --git a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-
> > > tinyxml2.cpp.patch b/recipes-support/opencv/opencv/0001-Use-Os-to-
> > > compile-tinyxml2.cpp.patch
> > > index c5a64387f525..7fdf1dd8a62b 100644
> > > --- a/recipes-support/opencv/opencv/0001-Use-Os-to-compile-
> > > tinyxml2.cpp.patch
> > > +++ b/recipes-support/opencv/opencv/0001-Use-Os-to-compile-
> > > tinyxml2.cpp.patch
> > > @@ -21,10 +21,10 @@ index 56ca9e310..99b7a33f6 100644
> > >
> > > set(filter_srcs
> > > "${CMAKE_CURRENT_LIST_DIR}/src/tinyxml2/tinyxml2.cpp")
> > > if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
> > > -- ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-
> > > suggest-override") # GCC
> > > -+ ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-
> > > suggest-override -Os") # GCC
> > > +- ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-
> > > suggest-override") # GCC
> > > ++ ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-
> > > suggest-override -Os") # GCC
> > > elseif(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
> > > - ocv_append_source_files_cxx_compiler_options(filter_srcs "-Wno-
> > > inconsistent-missing-override") # Clang
> > > + ocv:append:source_files_cxx_compiler_options(filter_srcs "-Wno-
> > > inconsistent-missing-override") # Clang
> > > endif()
> > > --
> > > 2.28.0
> > > diff --git a/recipes-support/opencv/opencv_4.5.2.imx.bb b/recipes-
> > > support/opencv/opencv_4.5.2.imx.bb
> > > index a86fd3ecb3da..402eab9bb52d 100644
> > > --- a/recipes-support/opencv/opencv_4.5.2.imx.bb
> > > +++ b/recipes-support/opencv/opencv_4.5.2.imx.bb
> > > @@ -11,8 +11,8 @@ SECTION = "libs"
> > > LICENSE = "Apache-2.0"
> > > LIC_FILES_CHKSUM = "
> > > file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
> > >
> > > -ARM_INSTRUCTION_SET_armv4 = "arm"
> > > -ARM_INSTRUCTION_SET_armv5 = "arm"
> > > +ARM_INSTRUCTION_SET:armv4 = "arm"
> > > +ARM_INSTRUCTION_SET:armv5 = "arm"
> > >
> > > DEPENDS = "libtool swig-native bzip2 zlib glib-2.0 libwebp"
> > >
> > > @@ -59,7 +59,7 @@ SRC_URI =
> > > "git://github.com/opencv/opencv.git;name=opencv \
> > > file://0001-Make-ts-module-external.patch \
> > >
> > > file://0001-sfm-link-with-Glog_LIBS.patch;patchdir=../contrib \
> > > "
> > > -SRC_URI_append_riscv64 = "
> > > file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
> > > +SRC_URI:append:riscv64 = "
> > > file://0001-Use-Os-to-compile-tinyxml2.cpp.patch;patchdir=../contrib"
> > >
> > > S = "${WORKDIR}/git"
> > >
> > > @@ -106,7 +106,7 @@ EXTRA_OECMAKE = "-
> > > DOPENCV_EXTRA_MODULES_PATH=${WORKDIR}/contrib/modules \
> > > ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.1", "-
> > > DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -
> > > DENABLE_SSE41=1", "", d)} \
> > > ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.2", "-
> > > DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -
> > > DENABLE_SSE41=1 -DENABLE_SSE42=1", "", d)} \
> > > "
> > > -EXTRA_OECMAKE_append_x86 = " -DX86=ON"
> > > +EXTRA_OECMAKE:append:x86 = " -DX86=ON"
> > >
> > > PACKAGECONFIG ??= "gapi python3 eigen jpeg png tiff v4l libv4l
> > > gstreamer samples tbb gphoto2 \
> > > ${@bb.utils.contains("DISTRO_FEATURES", "x11", "gtk", "", d)} \
> > > @@ -158,7 +158,7 @@ PACKAGES +=
> > > "${@bb.utils.contains('PACKAGECONFIG', 'samples', '${PN}-samples', '
> > > ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-
> > > ${BPN}', '', d)} \
> > > ${PN}-apps"
> > >
> > > -python populate_packages_prepend () {
> > > +python populate_packages:prepend () {
> > > cv_libdir = d.expand('${libdir}')
> > > do_split_packages(d, cv_libdir, '^lib(.*)\.so$', 'lib%s-dev',
> > > 'OpenCV %s development package', extra_depends='${PN}-dev',
> > > allow_links=True)
> > > do_split_packages(d, cv_libdir, '^lib(.*)\.la$', 'lib%s-dev',
> > > 'OpenCV %s development package', extra_depends='${PN}-dev')
> > > @@ -211,14 +211,14 @@ RDEPENDS_python3-opencv = "python3-core
> > > python3-numpy"
> > >
> > > RDEPENDS_${PN}-apps = "bash"
> > >
> > > -do_compile_prepend() {
> > > +do_compile:prepend() {
> > > # remove the build host info to improve reproducibility
> > > if [ -f ${WORKDIR}/build/modules/core/version_string.inc ]; then
> > > sed -i "s#${WORKDIR}#/workdir#g"
> > > ${WORKDIR}/build/modules/core/version_string.inc
> > > fi
> > > }
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > # Move Python files into correct library folder (for multilib
> > > build)
> > > if [ "$libdir" != "/usr/lib" -a -d ${D}/usr/lib ]; then
> > > mv ${D}/usr/lib/* ${D}/${libdir}/
> > > @@ -245,7 +245,7 @@ LIC_FILES_CHKSUM = "
> > > file://LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57"
> > > SRCREV_opencv = "5423d53ae0d116ee5bbe52f8b5503f0cd8586998"
> > > OPENCV_SRC ?= "git://source.codeaurora.org/external/imx/opencv-
> > > imx.git;protocol=https"
> > > SRCBRANCH = "4.5.2_imx"
> > > -SRC_URI_remove = "git://github.com/opencv/opencv.git;name=opencv"
> > > +SRC_URI:remove = "git://github.com/opencv/opencv.git;name=opencv"
> > > SRC_URI =+ "${OPENCV_SRC};branch=${SRCBRANCH};name=opencv"
> > >
> > > # Add opencv_extra
> > > @@ -254,7 +254,7 @@ SRC_URI += " \
> > >
> > > git://github.com/opencv/opencv_extra.git;destsuffix=extra;name=extra
> > > \
> > >
> > > file://0001-Add-smaller-version-of-download_models.py.patch;patchdir=../extra
> > > \
> > > "
> > > -SRCREV_FORMAT_append = "_extra"
> > > +SRCREV_FORMAT:append = "_extra"
> > >
> > > # Add tiny-dnn
> > > SRC_URI[tinydnn.md5sum] = "adb1c512e09ca2c7a6faef36f9c53e59"
> > > @@ -264,25 +264,25 @@ SRC_URI += " \
> > > file://OpenCV_DNN_examples.patch \
> > > "
> > >
> > > -PACKAGECONFIG_remove = "eigen"
> > > -PACKAGECONFIG_append_mx8 = " dnn text"
> > > +PACKAGECONFIG:remove = "eigen"
> > > +PACKAGECONFIG:append:mx8 = " dnn text"
> > > PACKAGECONFIG_OPENCL = ""
> > > -PACKAGECONFIG_OPENCL_mx8 = "opencl"
> > > -PACKAGECONFIG_OPENCL_mx8dxl = ""
> > > -PACKAGECONFIG_OPENCL_mx8mm = ""
> > > -PACKAGECONFIG_OPENCL_mx8mnlite = ""
> > > -PACKAGECONFIG_append = " ${PACKAGECONFIG_OPENCL}"
> > > +PACKAGECONFIG_OPENCL:mx8 = "opencl"
> > > +PACKAGECONFIG_OPENCL:mx8dxl = ""
> > > +PACKAGECONFIG_OPENCL:mx8mm = ""
> > > +PACKAGECONFIG_OPENCL:mx8mnlite = ""
> > > +PACKAGECONFIG:append = " ${PACKAGECONFIG_OPENCL}"
> > >
> > > PACKAGECONFIG[openvx] = "-DWITH_OPENVX=ON -
> > > DOPENVX_ROOT=${STAGING_LIBDIR} -
> > > DOPENVX_LIB_CANDIDATES='OpenVX;OpenVXU',-
> > > DWITH_OPENVX=OFF,virtual/libopenvx,"
> > > PACKAGECONFIG[qt5] = "-DWITH_QT=ON -
> > > DOE_QMAKE_PATH_EXTERNAL_HOST_BINS=${STAGING_BINDIR_NATIVE} -
> > > DCMAKE_PREFIX_PATH=${STAGING_BINDIR_NATIVE}/cmake,-
> > > DWITH_QT=OFF,qtbase qtbase-native,"
> > > PACKAGECONFIG[tests-imx] = "-DINSTALL_TESTS=ON -
> > > DOPENCV_TEST_DATA_PATH=${S}/../extra/testdata, -DINSTALL_TESTS=OFF,"
> > >
> > > -do_unpack_extra_append() {
> > > +do_unpack_extra:append() {
> > > mkdir -p ${S}/3rdparty/tinydnn/
> > > tar xzf ${WORKDIR}/v1.0.0a3.tar.gz -C ${S}/3rdparty/tinydnn/
> > > }
> > >
> > > -do_install_append() {
> > > +do_install:append() {
> > > ln -sf opencv4/opencv2 ${D}${includedir}/opencv2
> > > install -d ${D}${datadir}/OpenCV/samples/data
> > > cp -r ${S}/samples/data/* ${D}${datadir}/OpenCV/samples/data
> > > --
> > > 2.31.1
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
>
> --
> Thomas Perrot, Bootlin
> Embedded Linux and kernel engineering
> https://bootlin.com
>
>
>
>
--
Otavio Salvador O.S. Systems
http://www.ossystems.com.br http://code.ossystems.com.br
Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-08-10 18:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-07 7:07 [PATCH] meta-freescale: convert to new override syntax in honister Thomas Perrot
2021-08-07 11:33 ` [meta-freescale] " Otavio Salvador
2021-08-10 16:03 ` Thomas Perrot
2021-08-10 18:55 ` Otavio Salvador
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.