* [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
@ 2017-02-18 11:50 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 11:50 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Core ensures that there are no commands with cmd->data being set and
nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
because cmd_cfg was zero-initialized and this bit isn't set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- adjusted commit message because branch xfer_bytes == 0 is never reached
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 5a959783..07a7399c 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -516,14 +516,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
desc->cmd_cfg &= ~CMD_CFG_DATA_WR;
}
- if (xfer_bytes > 0) {
- desc->cmd_cfg &= ~CMD_CFG_DATA_NUM;
- desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
- } else {
- /* write data to data_addr */
- desc->cmd_cfg |= CMD_CFG_DATA_NUM;
- desc->cmd_data = 0;
- }
+ desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
cmd_cfg_timeout = 12;
} else {
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
@ 2017-02-18 11:50 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 11:50 UTC (permalink / raw)
To: linus-amlogic
Core ensures that there are no commands with cmd->data being set and
nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
because cmd_cfg was zero-initialized and this bit isn't set.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- adjusted commit message because branch xfer_bytes == 0 is never reached
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 9 +--------
1 file changed, 1 insertion(+), 8 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 5a959783..07a7399c 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -516,14 +516,7 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
desc->cmd_cfg &= ~CMD_CFG_DATA_WR;
}
- if (xfer_bytes > 0) {
- desc->cmd_cfg &= ~CMD_CFG_DATA_NUM;
- desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
- } else {
- /* write data to data_addr */
- desc->cmd_cfg |= CMD_CFG_DATA_NUM;
- desc->cmd_data = 0;
- }
+ desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
cmd_cfg_timeout = 12;
} else {
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 2/10] mmc: meson-gx: make two functions return void
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:06 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:06 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
The return value of meson_mmc_request_done and meson_mmc_read_resp
isn't used, so make both functions return void.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 07a7399c..b99461ff 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -426,7 +426,8 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
__func__, orig, val);
}
-static int meson_mmc_request_done(struct mmc_host *mmc, struct mmc_request *mrq)
+static void meson_mmc_request_done(struct mmc_host *mmc,
+ struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
@@ -435,8 +436,6 @@ static int meson_mmc_request_done(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = NULL;
host->cmd = NULL;
mmc_request_done(host->mmc, mrq);
-
- return 0;
}
static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
@@ -554,7 +553,7 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
meson_mmc_start_cmd(mmc, mrq->cmd);
}
-static int meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
+static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct meson_host *host = mmc_priv(mmc);
@@ -566,8 +565,6 @@ static int meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
} else if (cmd->flags & MMC_RSP_PRESENT) {
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
}
-
- return 0;
}
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 2/10] mmc: meson-gx: make two functions return void
@ 2017-02-18 13:06 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:06 UTC (permalink / raw)
To: linus-amlogic
The return value of meson_mmc_request_done and meson_mmc_read_resp
isn't used, so make both functions return void.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 07a7399c..b99461ff 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -426,7 +426,8 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
__func__, orig, val);
}
-static int meson_mmc_request_done(struct mmc_host *mmc, struct mmc_request *mrq)
+static void meson_mmc_request_done(struct mmc_host *mmc,
+ struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
@@ -435,8 +436,6 @@ static int meson_mmc_request_done(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = NULL;
host->cmd = NULL;
mmc_request_done(host->mmc, mrq);
-
- return 0;
}
static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
@@ -554,7 +553,7 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
meson_mmc_start_cmd(mmc, mrq->cmd);
}
-static int meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
+static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
{
struct meson_host *host = mmc_priv(mmc);
@@ -566,8 +565,6 @@ static int meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
} else if (cmd->flags & MMC_RSP_PRESENT) {
cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
}
-
- return 0;
}
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:07 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:07 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Member ocr_mask is never used and member irq we can replace with a
local variable in meson_mmc_probe. So let's remove both members.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index b99461ff..b9de3d47 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -127,8 +127,6 @@ struct meson_host {
spinlock_t lock;
void __iomem *regs;
- int irq;
- u32 ocr_mask;
struct clk *core_clk;
struct clk_mux mux;
struct clk *mux_clk;
@@ -712,7 +710,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
struct resource *res;
struct meson_host *host;
struct mmc_host *mmc;
- int ret;
+ int ret, irq;
mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
if (!mmc)
@@ -744,8 +742,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
goto free_host;
}
- host->irq = platform_get_irq(pdev, 0);
- if (host->irq == 0) {
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
dev_err(&pdev->dev, "failed to get interrupt resource.\n");
ret = -EINVAL;
goto free_host;
@@ -773,9 +771,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
- ret = devm_request_threaded_irq(&pdev->dev, host->irq,
- meson_mmc_irq, meson_mmc_irq_thread,
- IRQF_SHARED, DRIVER_NAME, host);
+ ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
+ meson_mmc_irq_thread, IRQF_SHARED,
+ DRIVER_NAME, host);
if (ret)
goto free_host;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host
@ 2017-02-18 13:07 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:07 UTC (permalink / raw)
To: linus-amlogic
Member ocr_mask is never used and member irq we can replace with a
local variable in meson_mmc_probe. So let's remove both members.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index b99461ff..b9de3d47 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -127,8 +127,6 @@ struct meson_host {
spinlock_t lock;
void __iomem *regs;
- int irq;
- u32 ocr_mask;
struct clk *core_clk;
struct clk_mux mux;
struct clk *mux_clk;
@@ -712,7 +710,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
struct resource *res;
struct meson_host *host;
struct mmc_host *mmc;
- int ret;
+ int ret, irq;
mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
if (!mmc)
@@ -744,8 +742,8 @@ static int meson_mmc_probe(struct platform_device *pdev)
goto free_host;
}
- host->irq = platform_get_irq(pdev, 0);
- if (host->irq == 0) {
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
dev_err(&pdev->dev, "failed to get interrupt resource.\n");
ret = -EINVAL;
goto free_host;
@@ -773,9 +771,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
- ret = devm_request_threaded_irq(&pdev->dev, host->irq,
- meson_mmc_irq, meson_mmc_irq_thread,
- IRQF_SHARED, DRIVER_NAME, host);
+ ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
+ meson_mmc_irq_thread, IRQF_SHARED,
+ DRIVER_NAME, host);
if (ret)
goto free_host;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:08 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:08 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Because the DT requires a fixed number of mux parent clocks,
variable mux_parent_count can be replaced with constant
MUX_CLK_NUM_PARENTS, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- adjusted commit message
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index b9de3d47..ea2db3ce 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -242,7 +242,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
char clk_name[32];
int i, ret = 0;
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
- unsigned int mux_parent_count = 0;
const char *clk_div_parents[1];
u32 clk_reg, cfg;
@@ -261,7 +260,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
}
mux_parent_names[i] = __clk_get_name(host->mux_parent[i]);
- mux_parent_count++;
}
/* create the mux */
@@ -270,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
- init.num_parents = mux_parent_count;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
host->mux.reg = host->regs + SD_EMMC_CLOCK;
host->mux.shift = CLK_SRC_SHIFT;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init
@ 2017-02-18 13:08 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:08 UTC (permalink / raw)
To: linus-amlogic
Because the DT requires a fixed number of mux parent clocks,
variable mux_parent_count can be replaced with constant
MUX_CLK_NUM_PARENTS, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- adjusted commit message
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index b9de3d47..ea2db3ce 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -242,7 +242,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
char clk_name[32];
int i, ret = 0;
const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
- unsigned int mux_parent_count = 0;
const char *clk_div_parents[1];
u32 clk_reg, cfg;
@@ -261,7 +260,6 @@ static int meson_mmc_clk_init(struct meson_host *host)
}
mux_parent_names[i] = __clk_get_name(host->mux_parent[i]);
- mux_parent_count++;
}
/* create the mux */
@@ -270,7 +268,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
init.ops = &clk_mux_ops;
init.flags = 0;
init.parent_names = mux_parent_names;
- init.num_parents = mux_parent_count;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
host->mux.reg = host->regs + SD_EMMC_CLOCK;
host->mux.shift = CLK_SRC_SHIFT;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:09 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:09 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Member mux_parent isn't used outside meson_mmc_clk_init. So remove it
and replace it with a local variable in meson_mmc_clk_init.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index ea2db3ce..68e76fa8 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -130,7 +130,6 @@ struct meson_host {
struct clk *core_clk;
struct clk_mux mux;
struct clk *mux_clk;
- struct clk *mux_parent[MUX_CLK_NUM_PARENTS];
unsigned long current_clock;
struct clk_divider cfg_div;
@@ -247,19 +246,18 @@ static int meson_mmc_clk_init(struct meson_host *host)
/* get the mux parents */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ struct clk *clk;
char name[16];
snprintf(name, sizeof(name), "clkin%d", i);
- host->mux_parent[i] = devm_clk_get(host->dev, name);
- if (IS_ERR(host->mux_parent[i])) {
- ret = PTR_ERR(host->mux_parent[i]);
- if (PTR_ERR(host->mux_parent[i]) != -EPROBE_DEFER)
+ clk = devm_clk_get(host->dev, name);
+ if (IS_ERR(clk)) {
+ if (clk != ERR_PTR(-EPROBE_DEFER))
dev_err(host->dev, "Missing clock %s\n", name);
- host->mux_parent[i] = NULL;
- return ret;
+ return PTR_ERR(clk);
}
- mux_parent_names[i] = __clk_get_name(host->mux_parent[i]);
+ mux_parent_names[i] = __clk_get_name(clk);
}
/* create the mux */
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host
@ 2017-02-18 13:09 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:09 UTC (permalink / raw)
To: linus-amlogic
Member mux_parent isn't used outside meson_mmc_clk_init. So remove it
and replace it with a local variable in meson_mmc_clk_init.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index ea2db3ce..68e76fa8 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -130,7 +130,6 @@ struct meson_host {
struct clk *core_clk;
struct clk_mux mux;
struct clk *mux_clk;
- struct clk *mux_parent[MUX_CLK_NUM_PARENTS];
unsigned long current_clock;
struct clk_divider cfg_div;
@@ -247,19 +246,18 @@ static int meson_mmc_clk_init(struct meson_host *host)
/* get the mux parents */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ struct clk *clk;
char name[16];
snprintf(name, sizeof(name), "clkin%d", i);
- host->mux_parent[i] = devm_clk_get(host->dev, name);
- if (IS_ERR(host->mux_parent[i])) {
- ret = PTR_ERR(host->mux_parent[i]);
- if (PTR_ERR(host->mux_parent[i]) != -EPROBE_DEFER)
+ clk = devm_clk_get(host->dev, name);
+ if (IS_ERR(clk)) {
+ if (clk != ERR_PTR(-EPROBE_DEFER))
dev_err(host->dev, "Missing clock %s\n", name);
- host->mux_parent[i] = NULL;
- return ret;
+ return PTR_ERR(clk);
}
- mux_parent_names[i] = __clk_get_name(host->mux_parent[i]);
+ mux_parent_names[i] = __clk_get_name(clk);
}
/* create the mux */
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:19 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:19 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic, Michał Zegan
The condition should be "if (ret)" as the disable/unprepare is
supposed to be executed if the previous command fails.
In addition adjust the error path in probe to properly deal
with the case that cfg_div_clk can be registered successfully
but enable/prepare fails.
In this case we shouldn't call clk_disable_unprepare.
Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- extended commit message
v3:
- adjust error path in probe
---
drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 68e76fa8..002e4aac 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
ret = meson_mmc_clk_set(host, host->mmc->f_min);
- if (!ret)
+ if (ret)
clk_disable_unprepare(host->cfg_div_clk);
return ret;
@@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
meson_mmc_irq_thread, IRQF_SHARED,
DRIVER_NAME, host);
if (ret)
- goto free_host;
+ goto err_div_clk;
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
@@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (host->bounce_buf == NULL) {
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
ret = -ENOMEM;
- goto free_host;
+ goto err_div_clk;
}
mmc->ops = &meson_mmc_ops;
@@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
return 0;
-free_host:
+err_div_clk:
clk_disable_unprepare(host->cfg_div_clk);
+free_host:
clk_disable_unprepare(host->core_clk);
mmc_free_host(mmc);
return ret;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
@ 2017-02-18 13:19 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:19 UTC (permalink / raw)
To: linus-amlogic
The condition should be "if (ret)" as the disable/unprepare is
supposed to be executed if the previous command fails.
In addition adjust the error path in probe to properly deal
with the case that cfg_div_clk can be registered successfully
but enable/prepare fails.
In this case we shouldn't call clk_disable_unprepare.
Reported-by: Micha? Zegan <webczat_200@poczta.onet.pl>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v2:
- extended commit message
v3:
- adjust error path in probe
---
drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 68e76fa8..002e4aac 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
ret = meson_mmc_clk_set(host, host->mmc->f_min);
- if (!ret)
+ if (ret)
clk_disable_unprepare(host->cfg_div_clk);
return ret;
@@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
meson_mmc_irq_thread, IRQF_SHARED,
DRIVER_NAME, host);
if (ret)
- goto free_host;
+ goto err_div_clk;
mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
@@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (host->bounce_buf == NULL) {
dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
ret = -ENOMEM;
- goto free_host;
+ goto err_div_clk;
}
mmc->ops = &meson_mmc_ops;
@@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
return 0;
-free_host:
+err_div_clk:
clk_disable_unprepare(host->cfg_div_clk);
+free_host:
clk_disable_unprepare(host->core_clk);
mmc_free_host(mmc);
return ret;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:20 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:20 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
CLK core does a deep copy of init.name, therefore it's fully ok to
provide a local variable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- fixed commit message
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 002e4aac..684cc088 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -281,7 +281,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
/* create the divider */
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
- init.name = devm_kstrdup(host->dev, clk_name, GFP_KERNEL);
+ init.name = clk_name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(host->mux_clk);
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init
@ 2017-02-18 13:20 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:20 UTC (permalink / raw)
To: linus-amlogic
CLK core does a deep copy of init.name, therefore it's fully ok to
provide a local variable.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- fixed commit message
- added acked-by
v3:
- no changes
---
drivers/mmc/host/meson-gx-mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 002e4aac..684cc088 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -281,7 +281,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
/* create the divider */
snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
- init.name = devm_kstrdup(host->dev, clk_name, GFP_KERNEL);
+ init.name = clk_name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
clk_div_parents[0] = __clk_get_name(host->mux_clk);
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 8/10] mmc: meson-gx: improve initial configuration
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:22 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:22 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.
In addition:
- write config register only if configuration changed
- Initialize clocks after other config registers have been initialized
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- rebased
---
drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 684cc088..e904b0a5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -394,15 +394,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
val |= bus_width << CFG_BUS_WIDTH_SHIFT;
- val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
- val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
-
- val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT);
- val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
-
- val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
- val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
-
val &= ~CFG_DDR;
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
ios->timing == MMC_TIMING_MMC_DDR52 ||
@@ -413,11 +404,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;
- writel(val, host->regs + SD_EMMC_CFG);
-
- if (val != orig)
+ if (val != orig) {
+ writel(val, host->regs + SD_EMMC_CFG);
dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
__func__, orig, val);
+ }
}
static void meson_mmc_request_done(struct mmc_host *mmc,
@@ -695,6 +686,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
return status;
}
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+ u32 cfg = 0;
+
+ cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
+
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
static const struct mmc_host_ops meson_mmc_ops = {
.request = meson_mmc_request,
.set_ios = meson_mmc_set_ios,
@@ -755,10 +757,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (ret)
goto free_host;
- ret = meson_mmc_clk_init(host);
- if (ret)
- goto free_host;
-
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
@@ -767,6 +765,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
+ /* set config to sane default */
+ meson_mmc_cfg_init(host);
+
+ ret = meson_mmc_clk_init(host);
+ if (ret)
+ goto free_host;
+
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
meson_mmc_irq_thread, IRQF_SHARED,
DRIVER_NAME, host);
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 8/10] mmc: meson-gx: improve initial configuration
@ 2017-02-18 13:22 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:22 UTC (permalink / raw)
To: linus-amlogic
Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.
In addition:
- write config register only if configuration changed
- Initialize clocks after other config registers have been initialized
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- added acked-by
v3:
- rebased
---
drivers/mmc/host/meson-gx-mmc.c | 37 +++++++++++++++++++++----------------
1 file changed, 21 insertions(+), 16 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 684cc088..e904b0a5 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -394,15 +394,6 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
val &= ~(CFG_BUS_WIDTH_MASK << CFG_BUS_WIDTH_SHIFT);
val |= bus_width << CFG_BUS_WIDTH_SHIFT;
- val &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT);
- val |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
-
- val &= ~(CFG_RESP_TIMEOUT_MASK << CFG_RESP_TIMEOUT_SHIFT);
- val |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
-
- val &= ~(CFG_RC_CC_MASK << CFG_RC_CC_SHIFT);
- val |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
-
val &= ~CFG_DDR;
if (ios->timing == MMC_TIMING_UHS_DDR50 ||
ios->timing == MMC_TIMING_MMC_DDR52 ||
@@ -413,11 +404,11 @@ static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
if (ios->timing == MMC_TIMING_MMC_HS400)
val |= CFG_CHK_DS;
- writel(val, host->regs + SD_EMMC_CFG);
-
- if (val != orig)
+ if (val != orig) {
+ writel(val, host->regs + SD_EMMC_CFG);
dev_dbg(host->dev, "%s: SD_EMMC_CFG: 0x%08x -> 0x%08x\n",
__func__, orig, val);
+ }
}
static void meson_mmc_request_done(struct mmc_host *mmc,
@@ -695,6 +686,17 @@ static int meson_mmc_get_cd(struct mmc_host *mmc)
return status;
}
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+ u32 cfg = 0;
+
+ cfg |= ilog2(SD_EMMC_CFG_RESP_TIMEOUT) << CFG_RESP_TIMEOUT_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_CMD_GAP) << CFG_RC_CC_SHIFT;
+ cfg |= ilog2(SD_EMMC_CFG_BLK_SIZE) << CFG_BLK_LEN_SHIFT;
+
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
static const struct mmc_host_ops meson_mmc_ops = {
.request = meson_mmc_request,
.set_ios = meson_mmc_set_ios,
@@ -755,10 +757,6 @@ static int meson_mmc_probe(struct platform_device *pdev)
if (ret)
goto free_host;
- ret = meson_mmc_clk_init(host);
- if (ret)
- goto free_host;
-
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
@@ -767,6 +765,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
+ /* set config to sane default */
+ meson_mmc_cfg_init(host);
+
+ ret = meson_mmc_clk_init(host);
+ if (ret)
+ goto free_host;
+
ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
meson_mmc_irq_thread, IRQF_SHARED,
DRIVER_NAME, host);
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 9/10] mmc: meson-gx: remove member mrq from struct meson_host
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:23 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:23 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Struct mmc_command includes a reference to the related mmc_request.
Therefore we don't have to store mrq separately in struct meson_host.
And we can remove some now unneeded WARN_ON's.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- extended commit message
- added acked-by
v3:
- rebased
---
drivers/mmc/host/meson-gx-mmc.c | 24 +++---------------------
1 file changed, 3 insertions(+), 21 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index e904b0a5..5281014e 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -122,7 +122,6 @@
struct meson_host {
struct device *dev;
struct mmc_host *mmc;
- struct mmc_request *mrq;
struct mmc_command *cmd;
spinlock_t lock;
@@ -416,9 +415,6 @@ static void meson_mmc_request_done(struct mmc_host *mmc,
{
struct meson_host *host = mmc_priv(mmc);
- WARN_ON(host->mrq != mrq);
-
- host->mrq = NULL;
host->cmd = NULL;
mmc_request_done(host->mmc, mrq);
}
@@ -525,13 +521,9 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
- WARN_ON(host->mrq != NULL);
-
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
- host->mrq = mrq;
-
if (mrq->sbc)
meson_mmc_start_cmd(mmc, mrq->sbc);
else
@@ -555,7 +547,6 @@ static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
- struct mmc_request *mrq;
struct mmc_command *cmd;
u32 irq_en, status, raw_status;
irqreturn_t ret = IRQ_HANDLED;
@@ -565,11 +556,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
cmd = host->cmd;
- mrq = host->mrq;
-
- if (WARN_ON(!mrq))
- return IRQ_NONE;
-
if (WARN_ON(!cmd))
return IRQ_NONE;
@@ -616,7 +602,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
else {
dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n",
status, cmd->opcode, cmd->arg,
- cmd->flags, mrq->stop ? 1 : 0);
+ cmd->flags, cmd->mrq->stop ? 1 : 0);
if (cmd->data) {
struct mmc_data *data = cmd->data;
@@ -643,14 +629,10 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
- struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd = host->cmd;
struct mmc_data *data;
unsigned int xfer_bytes;
- if (WARN_ON(!mrq))
- return IRQ_NONE;
-
if (WARN_ON(!cmd))
return IRQ_NONE;
@@ -664,8 +646,8 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
}
meson_mmc_read_resp(host->mmc, cmd);
- if (!data || !data->stop || mrq->sbc)
- meson_mmc_request_done(host->mmc, mrq);
+ if (!data || !data->stop || cmd->mrq->sbc)
+ meson_mmc_request_done(host->mmc, cmd->mrq);
else
meson_mmc_start_cmd(host->mmc, data->stop);
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 9/10] mmc: meson-gx: remove member mrq from struct meson_host
@ 2017-02-18 13:23 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:23 UTC (permalink / raw)
To: linus-amlogic
Struct mmc_command includes a reference to the related mmc_request.
Therefore we don't have to store mrq separately in struct meson_host.
And we can remove some now unneeded WARN_ON's.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
---
v2:
- extended commit message
- added acked-by
v3:
- rebased
---
drivers/mmc/host/meson-gx-mmc.c | 24 +++---------------------
1 file changed, 3 insertions(+), 21 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index e904b0a5..5281014e 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -122,7 +122,6 @@
struct meson_host {
struct device *dev;
struct mmc_host *mmc;
- struct mmc_request *mrq;
struct mmc_command *cmd;
spinlock_t lock;
@@ -416,9 +415,6 @@ static void meson_mmc_request_done(struct mmc_host *mmc,
{
struct meson_host *host = mmc_priv(mmc);
- WARN_ON(host->mrq != mrq);
-
- host->mrq = NULL;
host->cmd = NULL;
mmc_request_done(host->mmc, mrq);
}
@@ -525,13 +521,9 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct meson_host *host = mmc_priv(mmc);
- WARN_ON(host->mrq != NULL);
-
/* Stop execution */
writel(0, host->regs + SD_EMMC_START);
- host->mrq = mrq;
-
if (mrq->sbc)
meson_mmc_start_cmd(mmc, mrq->sbc);
else
@@ -555,7 +547,6 @@ static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
- struct mmc_request *mrq;
struct mmc_command *cmd;
u32 irq_en, status, raw_status;
irqreturn_t ret = IRQ_HANDLED;
@@ -565,11 +556,6 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
cmd = host->cmd;
- mrq = host->mrq;
-
- if (WARN_ON(!mrq))
- return IRQ_NONE;
-
if (WARN_ON(!cmd))
return IRQ_NONE;
@@ -616,7 +602,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
else {
dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n",
status, cmd->opcode, cmd->arg,
- cmd->flags, mrq->stop ? 1 : 0);
+ cmd->flags, cmd->mrq->stop ? 1 : 0);
if (cmd->data) {
struct mmc_data *data = cmd->data;
@@ -643,14 +629,10 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
{
struct meson_host *host = dev_id;
- struct mmc_request *mrq = host->mrq;
struct mmc_command *cmd = host->cmd;
struct mmc_data *data;
unsigned int xfer_bytes;
- if (WARN_ON(!mrq))
- return IRQ_NONE;
-
if (WARN_ON(!cmd))
return IRQ_NONE;
@@ -664,8 +646,8 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
}
meson_mmc_read_resp(host->mmc, cmd);
- if (!data || !data->stop || mrq->sbc)
- meson_mmc_request_done(host->mmc, mrq);
+ if (!data || !data->stop || cmd->mrq->sbc)
+ meson_mmc_request_done(host->mmc, cmd->mrq);
else
meson_mmc_start_cmd(host->mmc, data->stop);
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-02-18 13:26 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:26 UTC (permalink / raw)
To: Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Replace timeout magic numbers with proper constants.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v3:
- added to patch series
---
drivers/mmc/host/meson-gx-mmc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 5281014e..f244fcf9 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -116,6 +116,8 @@
#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
+#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
+#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
#define MUX_CLK_NUM_PARENTS 2
@@ -498,10 +500,10 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
- cmd_cfg_timeout = 12;
+ cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
} else {
desc->cmd_cfg &= ~CMD_CFG_DATA_IO;
- cmd_cfg_timeout = 10;
+ cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
}
desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
CMD_CFG_TIMEOUT_SHIFT;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants
@ 2017-02-18 13:26 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 13:26 UTC (permalink / raw)
To: linus-amlogic
Replace timeout magic numbers with proper constants.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
v3:
- added to patch series
---
drivers/mmc/host/meson-gx-mmc.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 5281014e..f244fcf9 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -116,6 +116,8 @@
#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
+#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
+#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
#define MUX_CLK_NUM_PARENTS 2
@@ -498,10 +500,10 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
- cmd_cfg_timeout = 12;
+ cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
} else {
desc->cmd_cfg &= ~CMD_CFG_DATA_IO;
- cmd_cfg_timeout = 10;
+ cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
}
desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
CMD_CFG_TIMEOUT_SHIFT;
--
2.11.1
^ permalink raw reply related [flat|nested] 36+ messages in thread
* Re: [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
2017-02-18 13:19 ` Heiner Kallweit
@ 2017-02-18 13:57 ` Michał Zegan
-1 siblings, 0 replies; 36+ messages in thread
From: Michał Zegan @ 2017-02-18 13:57 UTC (permalink / raw)
To: Heiner Kallweit, Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
[-- Attachment #1.1: Type: text/plain, Size: 2278 bytes --]
W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze:
> The condition should be "if (ret)" as the disable/unprepare is
> supposed to be executed if the previous command fails.
> In addition adjust the error path in probe to properly deal
> with the case that cfg_div_clk can be registered successfully
> but enable/prepare fails.
> In this case we shouldn't call clk_disable_unprepare.
>
> Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - extended commit message
> v3:
> - adjust error path in probe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 68e76fa8..002e4aac 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>
> ret = meson_mmc_clk_set(host, host->mmc->f_min);
> - if (!ret)
> + if (ret)
> clk_disable_unprepare(host->cfg_div_clk);
>
> return ret;
> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> meson_mmc_irq_thread, IRQF_SHARED,
> DRIVER_NAME, host);
> if (ret)
> - goto free_host;
> + goto err_div_clk;
>
> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> if (host->bounce_buf == NULL) {
> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> ret = -ENOMEM;
> - goto free_host;
> + goto err_div_clk;
> }
>
> mmc->ops = &meson_mmc_ops;
> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>
> return 0;
>
> -free_host:
> +err_div_clk:
> clk_disable_unprepare(host->cfg_div_clk);
> +free_host:
> clk_disable_unprepare(host->core_clk);
> mmc_free_host(mmc);
> return ret;
>
Doesn't the same problem exist with a core clock? It also could error
when being enabled, and it will be disabled even if not enabled before...
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 525 bytes --]
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
@ 2017-02-18 13:57 ` Michał Zegan
0 siblings, 0 replies; 36+ messages in thread
From: Michał Zegan @ 2017-02-18 13:57 UTC (permalink / raw)
To: linus-amlogic
W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze:
> The condition should be "if (ret)" as the disable/unprepare is
> supposed to be executed if the previous command fails.
> In addition adjust the error path in probe to properly deal
> with the case that cfg_div_clk can be registered successfully
> but enable/prepare fails.
> In this case we shouldn't call clk_disable_unprepare.
>
> Reported-by: Micha? Zegan <webczat_200@poczta.onet.pl>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> ---
> v2:
> - extended commit message
> v3:
> - adjust error path in probe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 68e76fa8..002e4aac 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>
> ret = meson_mmc_clk_set(host, host->mmc->f_min);
> - if (!ret)
> + if (ret)
> clk_disable_unprepare(host->cfg_div_clk);
>
> return ret;
> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> meson_mmc_irq_thread, IRQF_SHARED,
> DRIVER_NAME, host);
> if (ret)
> - goto free_host;
> + goto err_div_clk;
>
> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> if (host->bounce_buf == NULL) {
> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> ret = -ENOMEM;
> - goto free_host;
> + goto err_div_clk;
> }
>
> mmc->ops = &meson_mmc_ops;
> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>
> return 0;
>
> -free_host:
> +err_div_clk:
> clk_disable_unprepare(host->cfg_div_clk);
> +free_host:
> clk_disable_unprepare(host->core_clk);
> mmc_free_host(mmc);
> return ret;
>
Doesn't the same problem exist with a core clock? It also could error
when being enabled, and it will be disabled even if not enabled before...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 525 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20170218/7ebfe0b4/attachment.sig>
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
2017-02-18 13:57 ` Michał Zegan
@ 2017-02-18 15:22 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 15:22 UTC (permalink / raw)
To: Michał Zegan, Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
Am 18.02.2017 um 14:57 schrieb Michał Zegan:
>
>
> W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze:
>> The condition should be "if (ret)" as the disable/unprepare is
>> supposed to be executed if the previous command fails.
>> In addition adjust the error path in probe to properly deal
>> with the case that cfg_div_clk can be registered successfully
>> but enable/prepare fails.
>> In this case we shouldn't call clk_disable_unprepare.
>>
>> Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> v2:
>> - extended commit message
>> v3:
>> - adjust error path in probe
>> ---
>> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>> index 68e76fa8..002e4aac 100644
>> --- a/drivers/mmc/host/meson-gx-mmc.c
>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>>
>> ret = meson_mmc_clk_set(host, host->mmc->f_min);
>> - if (!ret)
>> + if (ret)
>> clk_disable_unprepare(host->cfg_div_clk);
>>
>> return ret;
>> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>> meson_mmc_irq_thread, IRQF_SHARED,
>> DRIVER_NAME, host);
>> if (ret)
>> - goto free_host;
>> + goto err_div_clk;
>>
>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
>> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
>> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>> if (host->bounce_buf == NULL) {
>> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>> ret = -ENOMEM;
>> - goto free_host;
>> + goto err_div_clk;
>> }
>>
>> mmc->ops = &meson_mmc_ops;
>> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>
>> return 0;
>>
>> -free_host:
>> +err_div_clk:
>> clk_disable_unprepare(host->cfg_div_clk);
>> +free_host:
>> clk_disable_unprepare(host->core_clk);
>> mmc_free_host(mmc);
>> return ret;
>>
> Doesn't the same problem exist with a core clock? It also could error
> when being enabled, and it will be disabled even if not enabled before...
>
Yes, there it's basically the same issue. Feel free to submit a patch.
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
@ 2017-02-18 15:22 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-02-18 15:22 UTC (permalink / raw)
To: linus-amlogic
Am 18.02.2017 um 14:57 schrieb Micha? Zegan:
>
>
> W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze:
>> The condition should be "if (ret)" as the disable/unprepare is
>> supposed to be executed if the previous command fails.
>> In addition adjust the error path in probe to properly deal
>> with the case that cfg_div_clk can be registered successfully
>> but enable/prepare fails.
>> In this case we shouldn't call clk_disable_unprepare.
>>
>> Reported-by: Micha? Zegan <webczat_200@poczta.onet.pl>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> ---
>> v2:
>> - extended commit message
>> v3:
>> - adjust error path in probe
>> ---
>> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>> index 68e76fa8..002e4aac 100644
>> --- a/drivers/mmc/host/meson-gx-mmc.c
>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>>
>> ret = meson_mmc_clk_set(host, host->mmc->f_min);
>> - if (!ret)
>> + if (ret)
>> clk_disable_unprepare(host->cfg_div_clk);
>>
>> return ret;
>> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>> meson_mmc_irq_thread, IRQF_SHARED,
>> DRIVER_NAME, host);
>> if (ret)
>> - goto free_host;
>> + goto err_div_clk;
>>
>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
>> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
>> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>> if (host->bounce_buf == NULL) {
>> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>> ret = -ENOMEM;
>> - goto free_host;
>> + goto err_div_clk;
>> }
>>
>> mmc->ops = &meson_mmc_ops;
>> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>
>> return 0;
>>
>> -free_host:
>> +err_div_clk:
>> clk_disable_unprepare(host->cfg_div_clk);
>> +free_host:
>> clk_disable_unprepare(host->core_clk);
>> mmc_free_host(mmc);
>> return ret;
>>
> Doesn't the same problem exist with a core clock? It also could error
> when being enabled, and it will be disabled even if not enabled before...
>
Yes, there it's basically the same issue. Feel free to submit a patch.
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
2017-02-18 15:22 ` Heiner Kallweit
@ 2017-02-18 15:30 ` Michał Zegan
-1 siblings, 0 replies; 36+ messages in thread
From: Michał Zegan @ 2017-02-18 15:30 UTC (permalink / raw)
To: Heiner Kallweit, Ulf Hansson, Kevin Hilman; +Cc: linux-mmc, linux-amlogic
[-- Attachment #1.1: Type: text/plain, Size: 2723 bytes --]
W dniu 18.02.2017 o 16:22, Heiner Kallweit pisze:
> Am 18.02.2017 um 14:57 schrieb Michał Zegan:
>>
>>
>> W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze:
>>> The condition should be "if (ret)" as the disable/unprepare is
>>> supposed to be executed if the previous command fails.
>>> In addition adjust the error path in probe to properly deal
>>> with the case that cfg_div_clk can be registered successfully
>>> but enable/prepare fails.
>>> In this case we shouldn't call clk_disable_unprepare.
>>>
>>> Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>> ---
>>> v2:
>>> - extended commit message
>>> v3:
>>> - adjust error path in probe
>>> ---
>>> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
>>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>>> index 68e76fa8..002e4aac 100644
>>> --- a/drivers/mmc/host/meson-gx-mmc.c
>>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>>> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>>>
>>> ret = meson_mmc_clk_set(host, host->mmc->f_min);
>>> - if (!ret)
>>> + if (ret)
>>> clk_disable_unprepare(host->cfg_div_clk);
>>>
>>> return ret;
>>> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>> meson_mmc_irq_thread, IRQF_SHARED,
>>> DRIVER_NAME, host);
>>> if (ret)
>>> - goto free_host;
>>> + goto err_div_clk;
>>>
>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
>>> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
>>> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>> if (host->bounce_buf == NULL) {
>>> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>>> ret = -ENOMEM;
>>> - goto free_host;
>>> + goto err_div_clk;
>>> }
>>>
>>> mmc->ops = &meson_mmc_ops;
>>> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>>
>>> return 0;
>>>
>>> -free_host:
>>> +err_div_clk:
>>> clk_disable_unprepare(host->cfg_div_clk);
>>> +free_host:
>>> clk_disable_unprepare(host->core_clk);
>>> mmc_free_host(mmc);
>>> return ret;
>>>
>> Doesn't the same problem exist with a core clock? It also could error
>> when being enabled, and it will be disabled even if not enabled before...
>>
> Yes, there it's basically the same issue. Feel free to submit a patch.
>
Okay, I will submit a patch based on this series to fix that too, thanks.
Reviewed-by: Michał Zegan <webczat@webczatnet.pl>
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 525 bytes --]
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
@ 2017-02-18 15:30 ` Michał Zegan
0 siblings, 0 replies; 36+ messages in thread
From: Michał Zegan @ 2017-02-18 15:30 UTC (permalink / raw)
To: linus-amlogic
W dniu 18.02.2017 o 16:22, Heiner Kallweit pisze:
> Am 18.02.2017 um 14:57 schrieb Micha? Zegan:
>>
>>
>> W dniu 18.02.2017 o 14:19, Heiner Kallweit pisze:
>>> The condition should be "if (ret)" as the disable/unprepare is
>>> supposed to be executed if the previous command fails.
>>> In addition adjust the error path in probe to properly deal
>>> with the case that cfg_div_clk can be registered successfully
>>> but enable/prepare fails.
>>> In this case we shouldn't call clk_disable_unprepare.
>>>
>>> Reported-by: Micha? Zegan <webczat_200@poczta.onet.pl>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>> ---
>>> v2:
>>> - extended commit message
>>> v3:
>>> - adjust error path in probe
>>> ---
>>> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
>>> 1 file changed, 5 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
>>> index 68e76fa8..002e4aac 100644
>>> --- a/drivers/mmc/host/meson-gx-mmc.c
>>> +++ b/drivers/mmc/host/meson-gx-mmc.c
>>> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>>> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>>>
>>> ret = meson_mmc_clk_set(host, host->mmc->f_min);
>>> - if (!ret)
>>> + if (ret)
>>> clk_disable_unprepare(host->cfg_div_clk);
>>>
>>> return ret;
>>> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>> meson_mmc_irq_thread, IRQF_SHARED,
>>> DRIVER_NAME, host);
>>> if (ret)
>>> - goto free_host;
>>> + goto err_div_clk;
>>>
>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
>>> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
>>> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>> if (host->bounce_buf == NULL) {
>>> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>>> ret = -ENOMEM;
>>> - goto free_host;
>>> + goto err_div_clk;
>>> }
>>>
>>> mmc->ops = &meson_mmc_ops;
>>> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>>>
>>> return 0;
>>>
>>> -free_host:
>>> +err_div_clk:
>>> clk_disable_unprepare(host->cfg_div_clk);
>>> +free_host:
>>> clk_disable_unprepare(host->core_clk);
>>> mmc_free_host(mmc);
>>> return ret;
>>>
>> Doesn't the same problem exist with a core clock? It also could error
>> when being enabled, and it will be disabled even if not enabled before...
>>
> Yes, there it's basically the same issue. Feel free to submit a patch.
>
Okay, I will submit a patch based on this series to fix that too, thanks.
Reviewed-by: Micha? Zegan <webczat@webczatnet.pl>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 525 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20170218/8d1750e3/attachment.sig>
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
2017-02-18 13:19 ` Heiner Kallweit
@ 2017-02-28 3:06 ` Kevin Hilman
-1 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-02-28 3:06 UTC (permalink / raw)
To: Heiner Kallweit; +Cc: Ulf Hansson, linux-mmc, linux-amlogic, Michał Zegan
Heiner Kallweit <hkallweit1@gmail.com> writes:
> The condition should be "if (ret)" as the disable/unprepare is
> supposed to be executed if the previous command fails.
> In addition adjust the error path in probe to properly deal
> with the case that cfg_div_clk can be registered successfully
> but enable/prepare fails.
> In this case we shouldn't call clk_disable_unprepare.
>
> Reported-by: Michał Zegan <webczat_200@poczta.onet.pl>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
> ---
> v2:
> - extended commit message
> v3:
> - adjust error path in probe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 68e76fa8..002e4aac 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>
> ret = meson_mmc_clk_set(host, host->mmc->f_min);
> - if (!ret)
> + if (ret)
> clk_disable_unprepare(host->cfg_div_clk);
>
> return ret;
> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> meson_mmc_irq_thread, IRQF_SHARED,
> DRIVER_NAME, host);
> if (ret)
> - goto free_host;
> + goto err_div_clk;
>
> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> if (host->bounce_buf == NULL) {
> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> ret = -ENOMEM;
> - goto free_host;
> + goto err_div_clk;
> }
>
> mmc->ops = &meson_mmc_ops;
> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>
> return 0;
>
> -free_host:
> +err_div_clk:
> clk_disable_unprepare(host->cfg_div_clk);
> +free_host:
> clk_disable_unprepare(host->core_clk);
> mmc_free_host(mmc);
> return ret;
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
@ 2017-02-28 3:06 ` Kevin Hilman
0 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-02-28 3:06 UTC (permalink / raw)
To: linus-amlogic
Heiner Kallweit <hkallweit1@gmail.com> writes:
> The condition should be "if (ret)" as the disable/unprepare is
> supposed to be executed if the previous command fails.
> In addition adjust the error path in probe to properly deal
> with the case that cfg_div_clk can be registered successfully
> but enable/prepare fails.
> In this case we shouldn't call clk_disable_unprepare.
>
> Reported-by: Micha? Zegan <webczat_200@poczta.onet.pl>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
> ---
> v2:
> - extended commit message
> v3:
> - adjust error path in probe
> ---
> drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 68e76fa8..002e4aac 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
> host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>
> ret = meson_mmc_clk_set(host, host->mmc->f_min);
> - if (!ret)
> + if (ret)
> clk_disable_unprepare(host->cfg_div_clk);
>
> return ret;
> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> meson_mmc_irq_thread, IRQF_SHARED,
> DRIVER_NAME, host);
> if (ret)
> - goto free_host;
> + goto err_div_clk;
>
> mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
> mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
> if (host->bounce_buf == NULL) {
> dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
> ret = -ENOMEM;
> - goto free_host;
> + goto err_div_clk;
> }
>
> mmc->ops = &meson_mmc_ops;
> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>
> return 0;
>
> -free_host:
> +err_div_clk:
> clk_disable_unprepare(host->cfg_div_clk);
> +free_host:
> clk_disable_unprepare(host->core_clk);
> mmc_free_host(mmc);
> return ret;
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants
2017-02-18 13:26 ` Heiner Kallweit
@ 2017-02-28 3:07 ` Kevin Hilman
-1 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-02-28 3:07 UTC (permalink / raw)
To: Heiner Kallweit; +Cc: Ulf Hansson, linux-mmc, linux-amlogic
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Replace timeout magic numbers with proper constants.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
> ---
> v3:
> - added to patch series
> ---
> drivers/mmc/host/meson-gx-mmc.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 5281014e..f244fcf9 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -116,6 +116,8 @@
>
> #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
> #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
> +#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
> +#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
> #define MUX_CLK_NUM_PARENTS 2
>
> @@ -498,10 +500,10 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>
> desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
>
> - cmd_cfg_timeout = 12;
> + cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
> } else {
> desc->cmd_cfg &= ~CMD_CFG_DATA_IO;
> - cmd_cfg_timeout = 10;
> + cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
> }
> desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
> CMD_CFG_TIMEOUT_SHIFT;
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants
@ 2017-02-28 3:07 ` Kevin Hilman
0 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-02-28 3:07 UTC (permalink / raw)
To: linus-amlogic
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Replace timeout magic numbers with proper constants.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
> ---
> v3:
> - added to patch series
> ---
> drivers/mmc/host/meson-gx-mmc.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 5281014e..f244fcf9 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -116,6 +116,8 @@
>
> #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
> #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
> +#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
> +#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
> #define MUX_CLK_NUM_PARENTS 2
>
> @@ -498,10 +500,10 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>
> desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
>
> - cmd_cfg_timeout = 12;
> + cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA);
> } else {
> desc->cmd_cfg &= ~CMD_CFG_DATA_IO;
> - cmd_cfg_timeout = 10;
> + cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT);
> }
> desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) <<
> CMD_CFG_TIMEOUT_SHIFT;
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
2017-02-18 11:50 ` Heiner Kallweit
@ 2017-03-01 18:09 ` Kevin Hilman
-1 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-03-01 18:09 UTC (permalink / raw)
To: Heiner Kallweit; +Cc: Ulf Hansson, linux-mmc, linux-amlogic
Hi Heinar,
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Core ensures that there are no commands with cmd->data being set and
> nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
> because cmd_cfg was zero-initialized and this bit isn't set.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> Acked-by: Kevin Hilman <khilman@baylibre.com>
Could you send this series one more time, collecting the remaining tags
and including the patches from Michał Zegan?
I think the MMC maintainers would appreciate one final batch with
everything collected together, and including a cover letter.
Thanks for all your great work on improving this driver,
Kevin
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
@ 2017-03-01 18:09 ` Kevin Hilman
0 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-03-01 18:09 UTC (permalink / raw)
To: linus-amlogic
Hi Heinar,
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Core ensures that there are no commands with cmd->data being set and
> nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
> because cmd_cfg was zero-initialized and this bit isn't set.
>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
> Acked-by: Kevin Hilman <khilman@baylibre.com>
Could you send this series one more time, collecting the remaining tags
and including the patches from Micha? Zegan?
I think the MMC maintainers would appreciate one final batch with
everything collected together, and including a cover letter.
Thanks for all your great work on improving this driver,
Kevin
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
2017-03-01 18:09 ` Kevin Hilman
@ 2017-03-01 20:20 ` Heiner Kallweit
-1 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-03-01 20:20 UTC (permalink / raw)
To: Kevin Hilman, Ulf Hansson; +Cc: linux-mmc, linux-amlogic
Am 01.03.2017 um 19:09 schrieb Kevin Hilman:
> Hi Heinar,
>
> Heiner Kallweit <hkallweit1@gmail.com> writes:
>
>> Core ensures that there are no commands with cmd->data being set and
>> nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
>> because cmd_cfg was zero-initialized and this bit isn't set.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> Acked-by: Kevin Hilman <khilman@baylibre.com>
>
> Could you send this series one more time, collecting the remaining tags
> and including the patches from Michał Zegan?
>
Patchwork tracks all the tags coming in for a patch, there it's visible
that you acked my 10 patches + the two from Michal.
So I would leave it up to Ulf whether he prefers to have the series
re-sent (with just the few remaining acks as changes).
Heiner
> I think the MMC maintainers would appreciate one final batch with
> everything collected together, and including a cover letter.
>
> Thanks for all your great work on improving this driver,
>
> Kevin
>
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
@ 2017-03-01 20:20 ` Heiner Kallweit
0 siblings, 0 replies; 36+ messages in thread
From: Heiner Kallweit @ 2017-03-01 20:20 UTC (permalink / raw)
To: linus-amlogic
Am 01.03.2017 um 19:09 schrieb Kevin Hilman:
> Hi Heinar,
>
> Heiner Kallweit <hkallweit1@gmail.com> writes:
>
>> Core ensures that there are no commands with cmd->data being set and
>> nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
>> because cmd_cfg was zero-initialized and this bit isn't set.
>>
>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>> Acked-by: Kevin Hilman <khilman@baylibre.com>
>
> Could you send this series one more time, collecting the remaining tags
> and including the patches from Micha? Zegan?
>
Patchwork tracks all the tags coming in for a patch, there it's visible
that you acked my 10 patches + the two from Michal.
So I would leave it up to Ulf whether he prefers to have the series
re-sent (with just the few remaining acks as changes).
Heiner
> I think the MMC maintainers would appreciate one final batch with
> everything collected together, and including a cover letter.
>
> Thanks for all your great work on improving this driver,
>
> Kevin
>
^ permalink raw reply [flat|nested] 36+ messages in thread
* Re: [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
2017-03-01 20:20 ` Heiner Kallweit
@ 2017-03-03 18:17 ` Kevin Hilman
-1 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-03-03 18:17 UTC (permalink / raw)
To: Heiner Kallweit; +Cc: Ulf Hansson, linux-mmc, linux-amlogic
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Am 01.03.2017 um 19:09 schrieb Kevin Hilman:
>> Hi Heinar,
>>
>> Heiner Kallweit <hkallweit1@gmail.com> writes:
>>
>>> Core ensures that there are no commands with cmd->data being set and
>>> nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
>>> because cmd_cfg was zero-initialized and this bit isn't set.
>>>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>> Acked-by: Kevin Hilman <khilman@baylibre.com>
>>
>> Could you send this series one more time, collecting the remaining tags
>> and including the patches from Michał Zegan?
>>
> Patchwork tracks all the tags coming in for a patch, there it's visible
> that you acked my 10 patches + the two from Michal.
Yes, I'm well aware of how patchwork works, yet my request still stands.
> So I would leave it up to Ulf whether he prefers to have the series
> re-sent (with just the few remaining acks as changes).
That's your choice, but some friendly advice from a kernel maintainer:
making things as easy as possible for maintainers/reviewers greatly
improves speed your code will get merged.
Kevin
^ permalink raw reply [flat|nested] 36+ messages in thread
* [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd
@ 2017-03-03 18:17 ` Kevin Hilman
0 siblings, 0 replies; 36+ messages in thread
From: Kevin Hilman @ 2017-03-03 18:17 UTC (permalink / raw)
To: linus-amlogic
Heiner Kallweit <hkallweit1@gmail.com> writes:
> Am 01.03.2017 um 19:09 schrieb Kevin Hilman:
>> Hi Heinar,
>>
>> Heiner Kallweit <hkallweit1@gmail.com> writes:
>>
>>> Core ensures that there are no commands with cmd->data being set and
>>> nothing to transfer. And we don't have to reset bit CMD_CFG_DATA_NUM
>>> because cmd_cfg was zero-initialized and this bit isn't set.
>>>
>>> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
>>> Acked-by: Kevin Hilman <khilman@baylibre.com>
>>
>> Could you send this series one more time, collecting the remaining tags
>> and including the patches from Micha? Zegan?
>>
> Patchwork tracks all the tags coming in for a patch, there it's visible
> that you acked my 10 patches + the two from Michal.
Yes, I'm well aware of how patchwork works, yet my request still stands.
> So I would leave it up to Ulf whether he prefers to have the series
> re-sent (with just the few remaining acks as changes).
That's your choice, but some friendly advice from a kernel maintainer:
making things as easy as possible for maintainers/reviewers greatly
improves speed your code will get merged.
Kevin
^ permalink raw reply [flat|nested] 36+ messages in thread
end of thread, other threads:[~2017-03-03 18:27 UTC | newest]
Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-02-18 11:50 [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Heiner Kallweit
2017-02-18 11:50 ` Heiner Kallweit
2017-02-18 13:06 ` [PATCH v3 2/10] mmc: meson-gx: make two functions return void Heiner Kallweit
2017-02-18 13:06 ` Heiner Kallweit
2017-02-18 13:07 ` [PATCH v3 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host Heiner Kallweit
2017-02-18 13:07 ` Heiner Kallweit
2017-02-18 13:08 ` [PATCH v3 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init Heiner Kallweit
2017-02-18 13:08 ` Heiner Kallweit
2017-02-18 13:09 ` [PATCH v3 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host Heiner Kallweit
2017-02-18 13:09 ` Heiner Kallweit
2017-02-18 13:19 ` [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe Heiner Kallweit
2017-02-18 13:19 ` Heiner Kallweit
2017-02-18 13:57 ` Michał Zegan
2017-02-18 13:57 ` Michał Zegan
2017-02-18 15:22 ` Heiner Kallweit
2017-02-18 15:22 ` Heiner Kallweit
2017-02-18 15:30 ` Michał Zegan
2017-02-18 15:30 ` Michał Zegan
2017-02-28 3:06 ` Kevin Hilman
2017-02-28 3:06 ` Kevin Hilman
2017-02-18 13:20 ` [PATCH v3 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init Heiner Kallweit
2017-02-18 13:20 ` Heiner Kallweit
2017-02-18 13:22 ` [PATCH v3 8/10] mmc: meson-gx: improve initial configuration Heiner Kallweit
2017-02-18 13:22 ` Heiner Kallweit
2017-02-18 13:23 ` [PATCH v3 9/10] mmc: meson-gx: remove member mrq from struct meson_host Heiner Kallweit
2017-02-18 13:23 ` Heiner Kallweit
2017-02-18 13:26 ` [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants Heiner Kallweit
2017-02-18 13:26 ` Heiner Kallweit
2017-02-28 3:07 ` Kevin Hilman
2017-02-28 3:07 ` Kevin Hilman
2017-03-01 18:09 ` [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Kevin Hilman
2017-03-01 18:09 ` Kevin Hilman
2017-03-01 20:20 ` Heiner Kallweit
2017-03-01 20:20 ` Heiner Kallweit
2017-03-03 18:17 ` Kevin Hilman
2017-03-03 18:17 ` Kevin Hilman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.