All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: <nsekhar@ti.com>, <linux-omap@vger.kernel.org>,
	<linux-mmc@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH 4/7] mmc: sdhci: Add quirk to indicate broken POWER_CONTROL
Date: Thu, 17 Aug 2017 11:02:29 +0530	[thread overview]
Message-ID: <c7712629-f462-b315-fd79-67882549ef83@ti.com> (raw)
In-Reply-To: <45762ded-3c42-fefc-e6bb-2542d75c9c67@intel.com>



On Tuesday 15 August 2017 01:11 PM, Adrian Hunter wrote:
> On 07/08/17 19:01, Kishon Vijay Abraham I wrote:
>> TI's implementation of sdhci controller used in DRA7 SoC's uses
>> POWER_CONTROL register for configuring IO voltage and not
>> for core voltage (vdd) which is it's intended use. Add a quirk
>> to indicate broken POWER_CONTROL register.
> 
> A quirk isn't needed for this.  Use the ->set_power() callback instead.

sure!

Thanks
Kishon
> 
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  drivers/mmc/host/sdhci.c | 6 ++++++
>>  drivers/mmc/host/sdhci.h | 2 ++
>>  2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index d5050ec42481..a7465a56e6b5 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -1419,6 +1419,9 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
>>  
>>  	mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>>  
>> +	if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
>> +		return;
>> +
>>  	if (mode != MMC_POWER_OFF)
>>  		sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
>>  	else
>> @@ -1430,6 +1433,9 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
>>  {
>>  	u8 pwr = 0;
>>  
>> +	if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
>> +		return;
>> +
>>  	if (mode != MMC_POWER_OFF) {
>>  		switch (1 << vdd) {
>>  		case MMC_VDD_165_195:
>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>> index 39c7a2723906..ba94cca7c892 100644
>> --- a/drivers/mmc/host/sdhci.h
>> +++ b/drivers/mmc/host/sdhci.h
>> @@ -439,6 +439,8 @@ struct sdhci_host {
>>  #define SDHCI_QUIRK2_NO_CRC_STRIPPING			(1<<16)
>>  /* Controller has bad caps bits, but really supports DMA */
>>  #define SDHCI_QUIRK2_FORCE_ADMA				(1<<17)
>> +/* Controller uses POWER_CONTROL for managing IO voltage and not core voltage */
>> +#define SDHCI_QUIRK2_BROKEN_POWER_CONTROL		(1<<18)
>>  
>>  	int irq;		/* Device IRQ */
>>  	void __iomem *ioaddr;	/* Mapped address */
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Adrian Hunter <adrian.hunter@intel.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: nsekhar@ti.com, linux-omap@vger.kernel.org,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [RFC PATCH 4/7] mmc: sdhci: Add quirk to indicate broken POWER_CONTROL
Date: Thu, 17 Aug 2017 11:02:29 +0530	[thread overview]
Message-ID: <c7712629-f462-b315-fd79-67882549ef83@ti.com> (raw)
In-Reply-To: <45762ded-3c42-fefc-e6bb-2542d75c9c67@intel.com>



On Tuesday 15 August 2017 01:11 PM, Adrian Hunter wrote:
> On 07/08/17 19:01, Kishon Vijay Abraham I wrote:
>> TI's implementation of sdhci controller used in DRA7 SoC's uses
>> POWER_CONTROL register for configuring IO voltage and not
>> for core voltage (vdd) which is it's intended use. Add a quirk
>> to indicate broken POWER_CONTROL register.
> 
> A quirk isn't needed for this.  Use the ->set_power() callback instead.

sure!

Thanks
Kishon
> 
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> ---
>>  drivers/mmc/host/sdhci.c | 6 ++++++
>>  drivers/mmc/host/sdhci.h | 2 ++
>>  2 files changed, 8 insertions(+)
>>
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index d5050ec42481..a7465a56e6b5 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -1419,6 +1419,9 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
>>  
>>  	mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>>  
>> +	if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
>> +		return;
>> +
>>  	if (mode != MMC_POWER_OFF)
>>  		sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
>>  	else
>> @@ -1430,6 +1433,9 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
>>  {
>>  	u8 pwr = 0;
>>  
>> +	if (host->quirks2 & SDHCI_QUIRK2_BROKEN_POWER_CONTROL)
>> +		return;
>> +
>>  	if (mode != MMC_POWER_OFF) {
>>  		switch (1 << vdd) {
>>  		case MMC_VDD_165_195:
>> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
>> index 39c7a2723906..ba94cca7c892 100644
>> --- a/drivers/mmc/host/sdhci.h
>> +++ b/drivers/mmc/host/sdhci.h
>> @@ -439,6 +439,8 @@ struct sdhci_host {
>>  #define SDHCI_QUIRK2_NO_CRC_STRIPPING			(1<<16)
>>  /* Controller has bad caps bits, but really supports DMA */
>>  #define SDHCI_QUIRK2_FORCE_ADMA				(1<<17)
>> +/* Controller uses POWER_CONTROL for managing IO voltage and not core voltage */
>> +#define SDHCI_QUIRK2_BROKEN_POWER_CONTROL		(1<<18)
>>  
>>  	int irq;		/* Device IRQ */
>>  	void __iomem *ioaddr;	/* Mapped address */
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  reply	other threads:[~2017-08-17  5:33 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-07 16:01 [RFC PATCH 0/7] mmc: Add OMAP SDHCI driver Kishon Vijay Abraham I
2017-08-07 16:01 ` Kishon Vijay Abraham I
2017-08-07 16:01 ` [RFC PATCH 1/7] mmc: sdhci: Add quirk to indicate no CRC stripping in MMC_RSP_136 Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I
2017-08-15  7:27   ` Adrian Hunter
2017-08-17  5:20     ` Kishon Vijay Abraham I
2017-08-17  5:20       ` Kishon Vijay Abraham I
2017-08-17  6:31       ` Adrian Hunter
2017-08-17  7:40         ` Kishon Vijay Abraham I
2017-08-17  7:40           ` Kishon Vijay Abraham I
2017-08-07 16:01 ` [RFC PATCH 2/7] mmc: sdhci: Add quirk to indicate controller supports ADMA2 Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I
2017-08-15  7:33   ` Adrian Hunter
2017-08-17  5:30     ` Kishon Vijay Abraham I
2017-08-17  5:30       ` Kishon Vijay Abraham I
2017-08-07 16:01 ` [RFC PATCH 3/7] mmc: sdhci: Add callback to set bus mode Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I
2017-08-15  7:38   ` Adrian Hunter
2017-08-17  5:31     ` Kishon Vijay Abraham I
2017-08-17  5:31       ` Kishon Vijay Abraham I
2017-08-07 16:01 ` [RFC PATCH 4/7] mmc: sdhci: Add quirk to indicate broken POWER_CONTROL Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I
2017-08-15  7:41   ` Adrian Hunter
2017-08-15  7:41     ` Adrian Hunter
2017-08-17  5:32     ` Kishon Vijay Abraham I [this message]
2017-08-17  5:32       ` Kishon Vijay Abraham I
2017-08-07 16:01 ` [RFC PATCH 5/7] dt-bindings: ti-omap-hsmmc: Document new compatible for sdhci omap Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I
2017-08-09 22:12   ` Tony Lindgren
2017-08-09 22:12     ` Tony Lindgren
2017-08-17  5:43     ` Kishon Vijay Abraham I
2017-08-17  5:43       ` Kishon Vijay Abraham I
2017-08-17 16:05       ` Tony Lindgren
2017-08-07 16:01 ` [RFC PATCH 6/7] mmc: sdhci-omap: Add OMAP SDHCI driver Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I
2017-08-15  8:22   ` Adrian Hunter
2017-08-15  8:22     ` Adrian Hunter
2017-08-17  5:57     ` Kishon Vijay Abraham I
2017-08-17  5:57       ` Kishon Vijay Abraham I
2017-08-17  6:43       ` Adrian Hunter
2017-08-17  7:59         ` Kishon Vijay Abraham I
2017-08-17  7:59           ` Kishon Vijay Abraham I
2017-08-17  8:23           ` Adrian Hunter
2017-08-20 11:03             ` Kishon Vijay Abraham I
2017-08-20 11:03               ` Kishon Vijay Abraham I
2017-08-07 16:01 ` [RFC PATCH 7/7] MAINTAINERS: Add TI OMAP SDHCI Maintainer Kishon Vijay Abraham I
2017-08-07 16:01   ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c7712629-f462-b315-fd79-67882549ef83@ti.com \
    --to=kishon@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nsekhar@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.