[PATCH v2 0/5] STM32 DSI HOST

[PATCH v2 0/5] STM32 DSI HOST

[Philippe CORNU]

Version 2:
- Add a generic Synopsys DesignWare MIPI DSI bridge driver following
  comments from Neil Armstrong & Archit Taneja.
- Use drm_of_find_panel_or_bridge() thanks to Eric Anholt comments
- Update dt-bindings thanks to Rob Herring comments

Version 1:
- Initial commit

The purpose of this set of patches is to add the mipi dsi host driver
to the stm32 family.

This mipi dsi host driver is based on the Rockchip version of the
Synopsys Designware mipi dsi driver (rockchip/dw-mipi-dsi.c)
modified for the stm32 family:
    - replace Rockchip digital & phy specific extensions with stm32's ones.
    - add a bridge

Philippe CORNU (5):
  drm/stm: ltdc: Add bridge support
  dt-bindings: display: Add Synopsys DW MIPI DSI DRM bridge driver
  drm/bridge/synopsys: Add MIPI DSI host controller bridge
  dt-bindings: display: Add STM32 DSI host driver
  drm/stm: Add STM32 DSI host driver

 .../bindings/display/bridge/dw_mipi_dsi.txt        |   36 +
 .../devicetree/bindings/display/st,stm32-ltdc.txt  |  102 +-
 drivers/gpu/drm/bridge/synopsys/Kconfig            |    9 +
 drivers/gpu/drm/bridge/synopsys/Makefile           |    2 +
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c      | 1024 ++++++++++++++++++++
 drivers/gpu/drm/stm/Kconfig                        |    8 +
 drivers/gpu/drm/stm/Makefile                       |    2 +
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c              |  328 +++++++
 drivers/gpu/drm/stm/ltdc.c                         |   74 +-
 drivers/gpu/drm/stm/ltdc.h                         |    1 +
 10 files changed, 1565 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
 create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
 create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 0/5] STM32 DSI HOST

[Philippe CORNU]

Version 2:
- Add a generic Synopsys DesignWare MIPI DSI bridge driver following
  comments from Neil Armstrong & Archit Taneja.
- Use drm_of_find_panel_or_bridge() thanks to Eric Anholt comments
- Update dt-bindings thanks to Rob Herring comments

Version 1:
- Initial commit

The purpose of this set of patches is to add the mipi dsi host driver
to the stm32 family.

This mipi dsi host driver is based on the Rockchip version of the
Synopsys Designware mipi dsi driver (rockchip/dw-mipi-dsi.c)
modified for the stm32 family:
    - replace Rockchip digital & phy specific extensions with stm32's ones.
    - add a bridge

Philippe CORNU (5):
  drm/stm: ltdc: Add bridge support
  dt-bindings: display: Add Synopsys DW MIPI DSI DRM bridge driver
  drm/bridge/synopsys: Add MIPI DSI host controller bridge
  dt-bindings: display: Add STM32 DSI host driver
  drm/stm: Add STM32 DSI host driver

 .../bindings/display/bridge/dw_mipi_dsi.txt        |   36 +
 .../devicetree/bindings/display/st,stm32-ltdc.txt  |  102 +-
 drivers/gpu/drm/bridge/synopsys/Kconfig            |    9 +
 drivers/gpu/drm/bridge/synopsys/Makefile           |    2 +
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c      | 1024 ++++++++++++++++++++
 drivers/gpu/drm/stm/Kconfig                        |    8 +
 drivers/gpu/drm/stm/Makefile                       |    2 +
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c              |  328 +++++++
 drivers/gpu/drm/stm/ltdc.c                         |   74 +-
 drivers/gpu/drm/stm/ltdc.h                         |    1 +
 10 files changed, 1565 insertions(+), 21 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
 create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
 create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c

-- 
1.9.1

[PATCH v2 1/5] drm/stm: ltdc: Add bridge support

[Philippe CORNU]

Add the bridge support, used by DSI host and HDMI/LVDS bridges.

Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
---
 drivers/gpu/drm/stm/ltdc.c | 74 ++++++++++++++++++++++++++++++++++------------
 drivers/gpu/drm/stm/ltdc.h |  1 +
 2 files changed, 56 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 7b2d63b..809e420 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -858,6 +858,43 @@ static struct drm_encoder *ltdc_rgb_encoder_create(struct drm_device *ddev)
 	return encoder;
 }
 
+static const struct drm_encoder_funcs bridge_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+struct drm_encoder *bridge_encoder_create(struct drm_device *ddev,
+					  struct drm_bridge *bridge)
+{
+	struct drm_encoder *encoder;
+	int ret;
+
+	encoder = devm_kzalloc(ddev->dev, sizeof(*encoder), GFP_KERNEL);
+	if (!encoder)
+		return NULL;
+
+	encoder->possible_crtcs = CRTC_MASK;
+	encoder->possible_clones = 0; /* No cloning support */
+
+	drm_encoder_init(ddev, encoder, &bridge_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS, NULL);
+
+	drm_encoder_helper_add(encoder, NULL);
+
+	/* Link drm_bridge to encoder */
+	bridge->encoder = encoder;
+	encoder->bridge = bridge;
+
+	ret = drm_bridge_attach(encoder, bridge, NULL);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return NULL;
+	}
+
+	DRM_DEBUG_DRIVER("Bridge encoder:%d created\n", encoder->base.id);
+
+	return encoder;
+}
+
 /*
  * DRM_CONNECTOR
  */
@@ -967,12 +1004,13 @@ static int ltdc_get_caps(struct drm_device *ddev)
 	return 0;
 }
 
-static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
+static int ltdc_parse_dt(struct drm_device *ddev)
 {
+	struct ltdc_device *ldev = ddev->dev_private;
 	struct device *dev = ddev->dev;
 	struct device_node *np = dev->of_node;
-	struct device_node *entity, *port = NULL;
-	struct drm_panel *panel = NULL;
+	struct device_node *entity;
+	int ret;
 
 	DRM_DEBUG_DRIVER("\n");
 
@@ -985,21 +1023,13 @@ static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
 		if (!of_device_is_available(entity))
 			continue;
 
-		port = of_graph_get_remote_port_parent(entity);
-		if (port) {
-			panel = of_drm_find_panel(port);
-			of_node_put(port);
-			if (panel) {
-				DRM_DEBUG_DRIVER("remote panel %s\n",
-						 port->full_name);
-			} else {
-				DRM_DEBUG_DRIVER("panel missing\n");
-				of_node_put(entity);
-			}
-		}
+		ret = drm_of_find_panel_or_bridge(np, 0, 0,
+						  &ldev->panel, &ldev->bridge);
+		if (ret)
+			return ret;
 	}
 
-	return panel;
+	return 0;
 }
 
 int ltdc_load(struct drm_device *ddev)
@@ -1017,9 +1047,9 @@ int ltdc_load(struct drm_device *ddev)
 
 	DRM_DEBUG_DRIVER("\n");
 
-	ldev->panel = ltdc_get_panel(ddev);
-	if (!ldev->panel)
-		return -EPROBE_DEFER;
+	ret = ltdc_parse_dt(ddev);
+	if (ret)
+		return ret;
 
 	rstc = of_reset_control_get(np, NULL);
 
@@ -1077,6 +1107,12 @@ int ltdc_load(struct drm_device *ddev)
 
 	DRM_INFO("ltdc hw version 0x%08x - ready\n", ldev->caps.hw_version);
 
+	if (ldev->bridge) {
+		encoder = bridge_encoder_create(ddev, ldev->bridge);
+		if (!encoder)
+			return -EINVAL;
+	}
+
 	if (ldev->panel) {
 		encoder = ltdc_rgb_encoder_create(ddev);
 		if (!encoder) {
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index 5427ef4..0083cad 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -25,6 +25,7 @@ struct ltdc_device {
 	void __iomem *regs;
 	struct clk *pixel_clk;	/* lcd pixel clock */
 	struct drm_panel *panel;
+	struct drm_bridge *bridge;
 	struct spinlock lock;	/* protecting irq status register */
 	struct ltdc_caps caps;
 	u32 clut[256];		/* color look up table */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 1/5] drm/stm: ltdc: Add bridge support

[Philippe CORNU]

Add the bridge support, used by DSI host and HDMI/LVDS bridges.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 drivers/gpu/drm/stm/ltdc.c | 74 ++++++++++++++++++++++++++++++++++------------
 drivers/gpu/drm/stm/ltdc.h |  1 +
 2 files changed, 56 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 7b2d63b..809e420 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -858,6 +858,43 @@ static struct drm_encoder *ltdc_rgb_encoder_create(struct drm_device *ddev)
 	return encoder;
 }
 
+static const struct drm_encoder_funcs bridge_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+struct drm_encoder *bridge_encoder_create(struct drm_device *ddev,
+					  struct drm_bridge *bridge)
+{
+	struct drm_encoder *encoder;
+	int ret;
+
+	encoder = devm_kzalloc(ddev->dev, sizeof(*encoder), GFP_KERNEL);
+	if (!encoder)
+		return NULL;
+
+	encoder->possible_crtcs = CRTC_MASK;
+	encoder->possible_clones = 0; /* No cloning support */
+
+	drm_encoder_init(ddev, encoder, &bridge_encoder_funcs,
+			 DRM_MODE_ENCODER_TMDS, NULL);
+
+	drm_encoder_helper_add(encoder, NULL);
+
+	/* Link drm_bridge to encoder */
+	bridge->encoder = encoder;
+	encoder->bridge = bridge;
+
+	ret = drm_bridge_attach(encoder, bridge, NULL);
+	if (ret) {
+		drm_encoder_cleanup(encoder);
+		return NULL;
+	}
+
+	DRM_DEBUG_DRIVER("Bridge encoder:%d created\n", encoder->base.id);
+
+	return encoder;
+}
+
 /*
  * DRM_CONNECTOR
  */
@@ -967,12 +1004,13 @@ static int ltdc_get_caps(struct drm_device *ddev)
 	return 0;
 }
 
-static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
+static int ltdc_parse_dt(struct drm_device *ddev)
 {
+	struct ltdc_device *ldev = ddev->dev_private;
 	struct device *dev = ddev->dev;
 	struct device_node *np = dev->of_node;
-	struct device_node *entity, *port = NULL;
-	struct drm_panel *panel = NULL;
+	struct device_node *entity;
+	int ret;
 
 	DRM_DEBUG_DRIVER("\n");
 
@@ -985,21 +1023,13 @@ static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
 		if (!of_device_is_available(entity))
 			continue;
 
-		port = of_graph_get_remote_port_parent(entity);
-		if (port) {
-			panel = of_drm_find_panel(port);
-			of_node_put(port);
-			if (panel) {
-				DRM_DEBUG_DRIVER("remote panel %s\n",
-						 port->full_name);
-			} else {
-				DRM_DEBUG_DRIVER("panel missing\n");
-				of_node_put(entity);
-			}
-		}
+		ret = drm_of_find_panel_or_bridge(np, 0, 0,
+						  &ldev->panel, &ldev->bridge);
+		if (ret)
+			return ret;
 	}
 
-	return panel;
+	return 0;
 }
 
 int ltdc_load(struct drm_device *ddev)
@@ -1017,9 +1047,9 @@ int ltdc_load(struct drm_device *ddev)
 
 	DRM_DEBUG_DRIVER("\n");
 
-	ldev->panel = ltdc_get_panel(ddev);
-	if (!ldev->panel)
-		return -EPROBE_DEFER;
+	ret = ltdc_parse_dt(ddev);
+	if (ret)
+		return ret;
 
 	rstc = of_reset_control_get(np, NULL);
 
@@ -1077,6 +1107,12 @@ int ltdc_load(struct drm_device *ddev)
 
 	DRM_INFO("ltdc hw version 0x%08x - ready\n", ldev->caps.hw_version);
 
+	if (ldev->bridge) {
+		encoder = bridge_encoder_create(ddev, ldev->bridge);
+		if (!encoder)
+			return -EINVAL;
+	}
+
 	if (ldev->panel) {
 		encoder = ltdc_rgb_encoder_create(ddev);
 		if (!encoder) {
diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
index 5427ef4..0083cad 100644
--- a/drivers/gpu/drm/stm/ltdc.h
+++ b/drivers/gpu/drm/stm/ltdc.h
@@ -25,6 +25,7 @@ struct ltdc_device {
 	void __iomem *regs;
 	struct clk *pixel_clk;	/* lcd pixel clock */
 	struct drm_panel *panel;
+	struct drm_bridge *bridge;
 	struct spinlock lock;	/* protecting irq status register */
 	struct ltdc_caps caps;
 	u32 clut[256];		/* color look up table */
-- 
1.9.1

[PATCH v2 2/5] dt-bindings: display: Add Synopsys DW MIPI DSI DRM bridge driver

[Philippe CORNU]

This patch adds documentation of device tree bindings for the
Synopsys DesignWare MIPI DSI host DRM bridge driver.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 .../bindings/display/bridge/dw_mipi_dsi.txt        | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..652c0f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,36 @@
+Synopsys DesignWare MIPI DSI host controller
+============================================
+
+This document defines device tree properties for the Synopsys DesignWare MIPI
+DSI host controller. It doesn't constitue a device tree binding specification
+by itself but is meant to be referenced by platform-specific device tree
+bindings.
+
+When referenced from platform device tree bindings the properties defined in
+this document are defined as follows. The platform device tree bindings are
+responsible for defining whether each property is required or optional.
+
+- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
+
+- clocks: References to all the clocks specified in the clock-names property
+  as specified in [1].
+
+- clock-names: The DWC MIPI DSI host uses the following clocks.
+
+  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
+  - "ref" is the pll reference clock (mandatory).
+
+- resets: References to all the resets specified in the reset-names property
+  as specified in [2]. (optional)
+
+- reset-names: string reset name, must be "apb" if used. (optional)
+
+- ports: The connectivity of the DWC MIPI DSI host controller
+  with the rest of the system is expressed in using ports as specified in the
+  device graph bindings in [3] & [4]. The numbering of the ports
+  is platform-specific.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/reset/reset.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/graph.txt
-- 
1.9.1

[PATCH v2 2/5] dt-bindings: display: Add Synopsys DW MIPI DSI DRM bridge driver

[Philippe CORNU]

This patch adds documentation of device tree bindings for the
Synopsys DesignWare MIPI DSI host DRM bridge driver.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 .../bindings/display/bridge/dw_mipi_dsi.txt        | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt

diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..652c0f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,36 @@
+Synopsys DesignWare MIPI DSI host controller
+============================================
+
+This document defines device tree properties for the Synopsys DesignWare MIPI
+DSI host controller. It doesn't constitue a device tree binding specification
+by itself but is meant to be referenced by platform-specific device tree
+bindings.
+
+When referenced from platform device tree bindings the properties defined in
+this document are defined as follows. The platform device tree bindings are
+responsible for defining whether each property is required or optional.
+
+- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
+
+- clocks: References to all the clocks specified in the clock-names property
+  as specified in [1].
+
+- clock-names: The DWC MIPI DSI host uses the following clocks.
+
+  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
+  - "ref" is the pll reference clock (mandatory).
+
+- resets: References to all the resets specified in the reset-names property
+  as specified in [2]. (optional)
+
+- reset-names: string reset name, must be "apb" if used. (optional)
+
+- ports: The connectivity of the DWC MIPI DSI host controller
+  with the rest of the system is expressed in using ports as specified in the
+  device graph bindings in [3] & [4]. The numbering of the ports
+  is platform-specific.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/reset/reset.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/graph.txt
-- 
1.9.1

[PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Philippe CORNU]

Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.

Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
---
 drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
 drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
 3 files changed, 1035 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c

diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
index 40d2827..d7fbdff 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
 	help
 	  Support the I2S Audio interface which is part of the Synopsys
 	  Designware HDMI block.
+
+config DRM_DW_MIPI_DSI
+	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	help
+	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
+	  controller bridge.
diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
index 17aa7a6..5f57d36 100644
--- a/drivers/gpu/drm/bridge/synopsys/Makefile
+++ b/drivers/gpu/drm/bridge/synopsys/Makefile
@@ -3,3 +3,5 @@
 obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
+
+obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
new file mode 100644
index 0000000..041f564
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -0,0 +1,1024 @@
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Modified by Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>
+ * This generic Synopsys Designware MIPI DSI host driver is based on the
+ * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <video/mipi_display.h>
+
+#define DSI_VERSION			0x00
+#define DSI_PWR_UP			0x04
+#define RESET				0
+#define POWERUP				BIT(0)
+
+#define DSI_CLKMGR_CFG			0x08
+#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
+
+#define DSI_DPI_VCID			0x0c
+#define DPI_VID(vid)			(((vid) & 0x3) << 0)
+
+#define DSI_DPI_COLOR_CODING		0x10
+#define EN18_LOOSELY			BIT(8)
+#define DPI_COLOR_CODING_16BIT_1	0x0
+#define DPI_COLOR_CODING_16BIT_2	0x1
+#define DPI_COLOR_CODING_16BIT_3	0x2
+#define DPI_COLOR_CODING_18BIT_1	0x3
+#define DPI_COLOR_CODING_18BIT_2	0x4
+#define DPI_COLOR_CODING_24BIT		0x5
+
+#define DSI_DPI_CFG_POL			0x14
+#define COLORM_ACTIVE_LOW		BIT(4)
+#define SHUTD_ACTIVE_LOW		BIT(3)
+#define HSYNC_ACTIVE_LOW		BIT(2)
+#define VSYNC_ACTIVE_LOW		BIT(1)
+#define DATAEN_ACTIVE_LOW		BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM		0x18
+#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
+
+#define DSI_DBI_CFG			0x20
+#define DSI_DBI_CMDSIZE			0x28
+
+#define DSI_PCKHDL_CFG			0x2c
+#define EN_CRC_RX			BIT(4)
+#define EN_ECC_RX			BIT(3)
+#define EN_BTA				BIT(2)
+#define EN_EOTP_RX			BIT(1)
+#define EN_EOTP_TX			BIT(0)
+
+#define DSI_MODE_CFG			0x34
+#define ENABLE_VIDEO_MODE		0
+#define ENABLE_CMD_MODE			BIT(0)
+
+#define DSI_VID_MODE_CFG		0x38
+#define FRAME_BTA_ACK			BIT(14)
+#define ENABLE_LOW_POWER		(0x3f << 8)
+#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
+#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
+#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
+#define VID_MODE_TYPE_BURST			0x2
+#define VID_MODE_TYPE_MASK			0x3
+
+#define DSI_VID_PKT_SIZE		0x3c
+#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
+#define VID_PKT_MAX_SIZE		0x3fff
+
+#define DSI_VID_HSA_TIME		0x48
+#define DSI_VID_HBP_TIME		0x4c
+#define DSI_VID_HLINE_TIME		0x50
+#define DSI_VID_VSA_LINES		0x54
+#define DSI_VID_VBP_LINES		0x58
+#define DSI_VID_VFP_LINES		0x5c
+#define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_CMD_MODE_CFG		0x68
+#define MAX_RD_PKT_SIZE_LP		BIT(24)
+#define DCS_LW_TX_LP			BIT(19)
+#define DCS_SR_0P_TX_LP			BIT(18)
+#define DCS_SW_1P_TX_LP			BIT(17)
+#define DCS_SW_0P_TX_LP			BIT(16)
+#define GEN_LW_TX_LP			BIT(14)
+#define GEN_SR_2P_TX_LP			BIT(13)
+#define GEN_SR_1P_TX_LP			BIT(12)
+#define GEN_SR_0P_TX_LP			BIT(11)
+#define GEN_SW_2P_TX_LP			BIT(10)
+#define GEN_SW_1P_TX_LP			BIT(9)
+#define GEN_SW_0P_TX_LP			BIT(8)
+#define EN_ACK_RQST			BIT(1)
+#define EN_TEAR_FX			BIT(0)
+
+#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
+					 DCS_LW_TX_LP | \
+					 DCS_SR_0P_TX_LP | \
+					 DCS_SW_1P_TX_LP | \
+					 DCS_SW_0P_TX_LP | \
+					 GEN_LW_TX_LP | \
+					 GEN_SR_2P_TX_LP | \
+					 GEN_SR_1P_TX_LP | \
+					 GEN_SR_0P_TX_LP | \
+					 GEN_SW_2P_TX_LP | \
+					 GEN_SW_1P_TX_LP | \
+					 GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR			0x6c
+#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
+#define GEN_HDATA_MASK			(0xffff << 8)
+#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
+#define GEN_HTYPE_MASK			0xff
+
+#define DSI_GEN_PLD_DATA		0x70
+
+#define DSI_CMD_PKT_STATUS		0x74
+#define GEN_CMD_EMPTY			BIT(0)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_RD_CMD_BUSY			BIT(6)
+
+#define DSI_TO_CNT_CFG			0x78
+#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p)			((p) & 0xffff)
+
+#define DSI_BTA_TO_CNT			0x8c
+#define DSI_LPCLK_CTRL			0x94
+#define AUTO_CLKLANE_CTRL		BIT(1)
+#define PHY_TXREQUESTCLKHS		BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG		0x98
+#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG			0x9c
+#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
+
+#define DSI_PHY_RSTZ			0xa0
+#define PHY_DISFORCEPLL			0
+#define PHY_ENFORCEPLL			BIT(3)
+#define PHY_DISABLECLK			0
+#define PHY_ENABLECLK			BIT(2)
+#define PHY_RSTZ			0
+#define PHY_UNRSTZ			BIT(1)
+#define PHY_SHUTDOWNZ			0
+#define PHY_UNSHUTDOWNZ			BIT(0)
+
+#define DSI_PHY_IF_CFG			0xa4
+#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
+#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+
+#define DSI_PHY_STATUS			0xb0
+#define LOCK				BIT(0)
+#define STOP_STATE_CLK_LANE		BIT(2)
+
+#define DSI_PHY_TST_CTRL0		0xb4
+#define PHY_TESTCLK			BIT(1)
+#define PHY_UNTESTCLK			0
+#define PHY_TESTCLR			BIT(0)
+#define PHY_UNTESTCLR			0
+
+#define DSI_PHY_TST_CTRL1		0xb8
+#define PHY_TESTEN			BIT(16)
+#define PHY_UNTESTEN			0
+#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
+#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
+
+#define DSI_INT_ST0			0xbc
+#define DSI_INT_ST1			0xc0
+#define DSI_INT_MSK0			0xc4
+#define DSI_INT_MSK1			0xc8
+
+#define PHY_STATUS_TIMEOUT_US		10000
+#define CMD_PKT_STATUS_TIMEOUT_US	20000
+
+struct dw_mipi_dsi {
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+	struct mipi_dsi_host dsi_host;
+	struct drm_panel *panel;
+	struct device *dev;
+	void __iomem *base;
+
+	struct clk *pllref_clk;
+	struct clk *pclk;
+
+	int dpms_mode;
+	unsigned int lane_mbps; /* per lane */
+	u32 channel;
+	u32 lanes;
+	u32 format;
+	unsigned long mode_flags;
+
+	const struct dw_mipi_dsi_plat_data *plat_data;
+};
+
+enum dw_mipi_dsi_mode {
+	DW_MIPI_DSI_CMD_MODE,
+	DW_MIPI_DSI_VID_MODE,
+};
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
+{
+	int refresh, two_frames;
+
+	refresh = drm_mode_vrefresh(mode);
+	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+	msleep(two_frames);
+}
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
+{
+	return container_of(con, struct dw_mipi_dsi, connector);
+}
+
+static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct dw_mipi_dsi, bridge);
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+	writel_relaxed(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+	return readl_relaxed(dsi->base + reg);
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	if (device->lanes > dsi->plat_data->max_data_lanes) {
+		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
+			device->lanes);
+		return -EINVAL;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->channel = device->channel;
+	dsi->format = device->format;
+	dsi->mode_flags = device->mode_flags;
+	dsi->panel = of_drm_find_panel(device->dev.of_node);
+	if (dsi->panel)
+		return drm_panel_attach(dsi->panel, &dsi->connector);
+
+	return -EINVAL;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	drm_panel_detach(dsi->panel);
+
+	return 0;
+}
+
+static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
+				   const struct mipi_dsi_msg *msg)
+{
+	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
+	u32 val = 0;
+
+	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
+		val |= EN_ACK_RQST;
+	if (lpm)
+		val |= CMD_MODE_ALL_LP;
+
+	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
+
+	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
+	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+
+	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL), 1000,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
+				       const struct mipi_dsi_msg *msg)
+{
+	const u8 *tx_buf = msg->tx_buf;
+	u16 data = 0;
+	u32 val;
+
+	if (msg->tx_len > 0)
+		data |= tx_buf[0];
+	if (msg->tx_len > 1)
+		data |= tx_buf[1] << 8;
+
+	if (msg->tx_len > 2) {
+		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
+			msg->tx_len);
+		return -EINVAL;
+	}
+
+	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
+				      const struct mipi_dsi_msg *msg)
+{
+	const u8 *tx_buf = msg->tx_buf;
+	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
+	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
+	u32 remainder;
+	u32 val;
+
+	if (msg->tx_len < 3) {
+		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
+			msg->tx_len);
+		return -EINVAL;
+	}
+
+	while (DIV_ROUND_UP(len, pld_data_bytes)) {
+		if (len < pld_data_bytes) {
+			remainder = 0;
+			memcpy(&remainder, tx_buf, len);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+			len = 0;
+		} else {
+			memcpy(&remainder, tx_buf, pld_data_bytes);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL), 1000,
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret < 0) {
+			dev_err(dsi->dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+					 const struct mipi_dsi_msg *msg)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	int ret;
+
+	/*
+	 * todo dw drv improvements
+	 * use mipi_dsi_create_packet() instead of all following
+	 * functions and code (no switch cases, no
+	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
+	 * and use packet.header...
+	 */
+	dw_mipi_message_config(dsi, msg);
+
+	switch (msg->type) {
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
+		break;
+	case MIPI_DSI_DCS_LONG_WRITE:
+		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
+		break;
+	default:
+		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
+			msg->type);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+	.attach = dw_mipi_dsi_host_attach,
+	.detach = dw_mipi_dsi_host_detach,
+	.transfer = dw_mipi_dsi_host_transfer,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+
+	/*
+	 * todo dw drv improvements
+	 * enabling low power is panel-dependent, we should use the
+	 * panel configuration here...
+	 */
+	val = ENABLE_LOW_POWER;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		val |= VID_MODE_TYPE_BURST;
+	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
+	else
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+				 enum dw_mipi_dsi_mode mode)
+{
+	if (mode == DW_MIPI_DSI_CMD_MODE) {
+		dsi_write(dsi, DSI_PWR_UP, RESET);
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+		dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	} else {
+		dsi_write(dsi, DSI_PWR_UP, RESET);
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+		dw_mipi_dsi_video_mode_config(dsi);
+		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+		dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	}
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * The maximum permitted escape clock is 20MHz and it is derived from
+	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
+	 *
+	 *     (lane_mbps >> 3) / esc_clk_division < 20
+	 * which is:
+	 *     (lane_mbps >> 3) / 20 > esc_clk_division
+	 */
+	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+		  | PHY_RSTZ | PHY_SHUTDOWNZ);
+	/*
+	 * todo dw drv improvements
+	 * timeout clock division should be computed with the
+	 * high speed transmission counter timeout and byte lane...
+	 */
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
+		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+				   struct drm_display_mode *mode)
+{
+	u32 val = 0, color = 0;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		color = DPI_COLOR_CODING_24BIT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		color = DPI_COLOR_CODING_18BIT_1;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		color = DPI_COLOR_CODING_16BIT_1;
+		break;
+	}
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= VSYNC_ACTIVE_LOW;
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= HSYNC_ACTIVE_LOW;
+
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
+	dsi_write(dsi, DSI_DPI_CFG_POL, val);
+	/*
+	 * todo dw drv improvements
+	 * largest packet sizes during hfp or during vsa/vpb/vfp
+	 * should be computed according to byte lane, lane number and only
+	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
+	 */
+	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+		  | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+					    struct drm_display_mode *mode)
+{
+	/*
+	 * todo dw drv improvements
+	 * only burst mode is supported here. For non-burst video modes,
+	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
+	 * DSI_VNPCR.NPSIZE... especially because this driver supports
+	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
+	 */
+	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * todo dw drv improvements
+	 * compute high speed transmission counter timeout according
+	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
+	 */
+	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+	/*
+	 * todo dw drv improvements
+	 * the Bus-Turn-Around Timeout Counter should be computed
+	 * according to byte lane...
+	 */
+	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+					   struct drm_display_mode *mode,
+					   u32 hcomponent)
+{
+	u32 frac, lbcc;
+
+	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	frac = lbcc % mode->clock;
+	lbcc = lbcc / mode->clock;
+	if (frac)
+		lbcc++;
+
+	return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
+					  struct drm_display_mode *mode)
+{
+	u32 htotal, hsa, hbp, lbcc;
+
+	htotal = mode->htotal;
+	hsa = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
+
+	/*
+	 * todo dw drv improvements
+	 * computations below may be improved...
+	 */
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
+	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
+	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
+	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
+					       struct drm_display_mode *mode)
+{
+	u32 vactive, vsa, vfp, vbp;
+
+	vactive = mode->vdisplay;
+	vsa = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * todo dw drv improvements
+	 * data & clock lane timers should be computed according to panel
+	 * blankings and to the automatic clock lane control mode...
+	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
+	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
+	 */
+	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
+		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+
+	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+		  | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * todo dw drv improvements
+	 * stop wait time should be the maximum between host dsi
+	 * and panel stop wait times
+	 */
+	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+		  N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+	dsi_read(dsi, DSI_INT_ST0);
+	dsi_read(dsi, DSI_INT_ST1);
+	dsi_write(dsi, DSI_INT_MSK0, 0);
+	dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
+		return;
+
+	if (clk_enable(dsi->pclk)) {
+		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
+		return;
+	}
+
+	drm_panel_disable(dsi->panel);
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	drm_panel_unprepare(dsi->panel);
+
+	dw_mipi_dsi_disable(dsi);
+	pm_runtime_put(dsi->dev);
+	clk_disable(dsi->pclk);
+	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
+}
+
+static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_encoder *encoder = bridge->encoder;
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+	void *priv_data = dsi->plat_data->priv_data;
+	int ret;
+
+	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
+		return;
+
+	if (clk_enable(dsi->pclk)) {
+		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
+		return;
+	}
+
+	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
+				     dsi->lanes, dsi->format, &dsi->lane_mbps);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
+
+	pm_runtime_get_sync(dsi->dev);
+	dw_mipi_dsi_init(dsi);
+	dw_mipi_dsi_dpi_config(dsi, mode);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, mode);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi, mode);
+	dw_mipi_dsi_vertical_timing_config(dsi, mode);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+	dw_mipi_dsi_clear_err(dsi);
+
+	/*
+	 * todo dw drv improvements
+	 * following command is inside dw_mipi_dsi_phy_init()
+	 * but this function is also required here. We way move it in the
+	 * phy but here we are using dsi regs...
+	 * maybe add the waiting loop here too...
+	 */
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
+				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+	ret = phy_ops->init(priv_data);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy init() failed\n");
+
+	dw_mipi_dsi_wait_for_two_frames(mode);
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	if (drm_panel_prepare(dsi->panel))
+		dev_err(dsi->dev, "failed to prepare panel\n");
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+	drm_panel_enable(dsi->panel);
+
+	clk_disable(dsi->pclk);
+
+	dsi->dpms_mode = DRM_MODE_DPMS_ON;
+}
+
+static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+	return drm_panel_get_modes(dsi->panel);
+}
+
+static enum drm_mode_status
+dw_mipi_dsi_mode_valid(struct drm_connector *connector,
+		       struct drm_display_mode *mode)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+	enum drm_mode_status mode_status = MODE_OK;
+
+	if (pdata->mode_valid)
+		mode_status = pdata->mode_valid(pdata->priv_data,
+						connector, mode);
+
+	return mode_status;
+}
+
+static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
+	.get_modes = dw_mipi_dsi_connector_get_modes,
+	.mode_valid = dw_mipi_dsi_mode_valid,
+};
+
+static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = dw_mipi_dsi_drm_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_connector *connector = &dsi->connector;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found\n");
+		return -ENODEV;
+	}
+
+	/* Set the encoder type as caller does not know it */
+	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(connector,
+				 &dw_mipi_dsi_connector_helper_funcs);
+
+	drm_connector_init(bridge->dev, connector,
+			   &dw_mipi_dsi_atomic_connector_funcs,
+			   DRM_MODE_CONNECTOR_DSI);
+
+	drm_mode_connector_attach_encoder(connector, bridge->encoder);
+
+	return 0;
+}
+
+static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+	.enable = dw_mipi_dsi_bridge_enable,
+	.disable = dw_mipi_dsi_bridge_disable,
+	.attach = dw_mipi_dsi_bridge_attach,
+};
+
+static struct dw_mipi_dsi *
+__dw_mipi_dsi_probe(struct platform_device *pdev,
+		    const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct device *dev = &pdev->dev;
+	struct reset_control *apb_rst;
+	struct dw_mipi_dsi *dsi;
+	struct resource *res;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return ERR_PTR(-ENOMEM);
+
+	dsi->dev = dev;
+	dsi->plat_data = plat_data;
+	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
+
+	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
+		DRM_ERROR("Phy not properly configured\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (!plat_data->base) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return ERR_PTR(-ENODEV);
+
+		dsi->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(dsi->base))
+			return ERR_PTR(-ENODEV);
+
+	} else {
+		dsi->base = plat_data->base;
+	}
+
+	dsi->pllref_clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(dsi->pllref_clk)) {
+		ret = PTR_ERR(dsi->pllref_clk);
+		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	dsi->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(dsi->pclk)) {
+		ret = PTR_ERR(dsi->pclk);
+		dev_err(dev, "Unable to get pclk: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/*
+	 * Note that the reset was not defined in the initial device tree, so
+	 * we have to be prepared for it not being found.
+	 */
+	apb_rst = devm_reset_control_get(dev, "apb");
+	if (IS_ERR(apb_rst)) {
+		ret = PTR_ERR(apb_rst);
+		if (ret == -ENOENT) {
+			apb_rst = NULL;
+		} else {
+			dev_err(dev, "Unable to get reset control: %d\n", ret);
+			return ERR_PTR(ret);
+		}
+	}
+
+	if (apb_rst) {
+		ret = clk_prepare_enable(dsi->pclk);
+		if (ret) {
+			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+			return ERR_PTR(ret);
+		}
+
+		reset_control_assert(apb_rst);
+		usleep_range(10, 20);
+		reset_control_deassert(apb_rst);
+
+		clk_disable(dsi->pclk);
+	}
+
+	ret = clk_prepare_enable(dsi->pllref_clk);
+	if (ret) {
+		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
+		return ERR_PTR(ret);
+	}
+
+	pm_runtime_enable(dev);
+
+	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+	dsi->dsi_host.dev = dev;
+	ret = mipi_dsi_host_register(&dsi->dsi_host);
+	if (ret) {
+		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+		goto err_cleanup;
+	}
+
+	dsi->bridge.driver_private = dsi;
+	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
+#ifdef CONFIG_OF
+	dsi->bridge.of_node = pdev->dev.of_node;
+#endif
+
+	clk_enable(dsi->pclk);
+
+	dev_set_drvdata(dev, dsi);
+
+	return dsi;
+
+err_cleanup:
+	clk_disable_unprepare(dsi->pllref_clk);
+
+	return ERR_PTR(ret);
+}
+
+static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
+{
+	pm_runtime_disable(dsi->dev);
+	clk_disable_unprepare(dsi->pllref_clk);
+}
+
+/*
+ * Probe/remove API, used from platforms based on the DRM bridge API.
+ */
+int dw_mipi_dsi_probe(struct platform_device *pdev,
+		      const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct dw_mipi_dsi *dsi;
+	int ret;
+
+	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
+	if (IS_ERR(dsi))
+		return PTR_ERR(dsi);
+
+	ret = drm_bridge_add(&dsi->bridge);
+	if (ret < 0) {
+		__dw_mipi_dsi_remove(dsi);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
+
+void dw_mipi_dsi_remove(struct platform_device *pdev)
+{
+	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
+
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+	drm_bridge_remove(&dsi->bridge);
+
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
+
+/*
+ * Bind/unbind API, used from platforms based on the component framework.
+ */
+int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
+		     const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct dw_mipi_dsi *dsi;
+	int ret;
+
+	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
+	if (IS_ERR(dsi))
+		return PTR_ERR(dsi);
+
+	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
+	if (ret) {
+		dw_mipi_dsi_remove(pdev);
+		DRM_ERROR("Failed to initialize bridge with drm\n");
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct device *dev)
+{
+	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
+
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_AUTHOR("Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>");
+MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dw-mipi-dsi");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Philippe CORNU]

Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
 drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
 3 files changed, 1035 insertions(+)
 create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c

diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
index 40d2827..d7fbdff 100644
--- a/drivers/gpu/drm/bridge/synopsys/Kconfig
+++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
@@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
 	help
 	  Support the I2S Audio interface which is part of the Synopsys
 	  Designware HDMI block.
+
+config DRM_DW_MIPI_DSI
+	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
+	select DRM_KMS_HELPER
+	select DRM_MIPI_DSI
+	select DRM_PANEL
+	help
+	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
+	  controller bridge.
diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
index 17aa7a6..5f57d36 100644
--- a/drivers/gpu/drm/bridge/synopsys/Makefile
+++ b/drivers/gpu/drm/bridge/synopsys/Makefile
@@ -3,3 +3,5 @@
 obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
 obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
 obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
+
+obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
new file mode 100644
index 0000000..041f564
--- /dev/null
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -0,0 +1,1024 @@
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Modified by Philippe Cornu <philippe.cornu@st.com>
+ * This generic Synopsys Designware MIPI DSI host driver is based on the
+ * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <video/mipi_display.h>
+
+#define DSI_VERSION			0x00
+#define DSI_PWR_UP			0x04
+#define RESET				0
+#define POWERUP				BIT(0)
+
+#define DSI_CLKMGR_CFG			0x08
+#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
+
+#define DSI_DPI_VCID			0x0c
+#define DPI_VID(vid)			(((vid) & 0x3) << 0)
+
+#define DSI_DPI_COLOR_CODING		0x10
+#define EN18_LOOSELY			BIT(8)
+#define DPI_COLOR_CODING_16BIT_1	0x0
+#define DPI_COLOR_CODING_16BIT_2	0x1
+#define DPI_COLOR_CODING_16BIT_3	0x2
+#define DPI_COLOR_CODING_18BIT_1	0x3
+#define DPI_COLOR_CODING_18BIT_2	0x4
+#define DPI_COLOR_CODING_24BIT		0x5
+
+#define DSI_DPI_CFG_POL			0x14
+#define COLORM_ACTIVE_LOW		BIT(4)
+#define SHUTD_ACTIVE_LOW		BIT(3)
+#define HSYNC_ACTIVE_LOW		BIT(2)
+#define VSYNC_ACTIVE_LOW		BIT(1)
+#define DATAEN_ACTIVE_LOW		BIT(0)
+
+#define DSI_DPI_LP_CMD_TIM		0x18
+#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
+#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
+
+#define DSI_DBI_CFG			0x20
+#define DSI_DBI_CMDSIZE			0x28
+
+#define DSI_PCKHDL_CFG			0x2c
+#define EN_CRC_RX			BIT(4)
+#define EN_ECC_RX			BIT(3)
+#define EN_BTA				BIT(2)
+#define EN_EOTP_RX			BIT(1)
+#define EN_EOTP_TX			BIT(0)
+
+#define DSI_MODE_CFG			0x34
+#define ENABLE_VIDEO_MODE		0
+#define ENABLE_CMD_MODE			BIT(0)
+
+#define DSI_VID_MODE_CFG		0x38
+#define FRAME_BTA_ACK			BIT(14)
+#define ENABLE_LOW_POWER		(0x3f << 8)
+#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
+#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
+#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
+#define VID_MODE_TYPE_BURST			0x2
+#define VID_MODE_TYPE_MASK			0x3
+
+#define DSI_VID_PKT_SIZE		0x3c
+#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
+#define VID_PKT_MAX_SIZE		0x3fff
+
+#define DSI_VID_HSA_TIME		0x48
+#define DSI_VID_HBP_TIME		0x4c
+#define DSI_VID_HLINE_TIME		0x50
+#define DSI_VID_VSA_LINES		0x54
+#define DSI_VID_VBP_LINES		0x58
+#define DSI_VID_VFP_LINES		0x5c
+#define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_CMD_MODE_CFG		0x68
+#define MAX_RD_PKT_SIZE_LP		BIT(24)
+#define DCS_LW_TX_LP			BIT(19)
+#define DCS_SR_0P_TX_LP			BIT(18)
+#define DCS_SW_1P_TX_LP			BIT(17)
+#define DCS_SW_0P_TX_LP			BIT(16)
+#define GEN_LW_TX_LP			BIT(14)
+#define GEN_SR_2P_TX_LP			BIT(13)
+#define GEN_SR_1P_TX_LP			BIT(12)
+#define GEN_SR_0P_TX_LP			BIT(11)
+#define GEN_SW_2P_TX_LP			BIT(10)
+#define GEN_SW_1P_TX_LP			BIT(9)
+#define GEN_SW_0P_TX_LP			BIT(8)
+#define EN_ACK_RQST			BIT(1)
+#define EN_TEAR_FX			BIT(0)
+
+#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
+					 DCS_LW_TX_LP | \
+					 DCS_SR_0P_TX_LP | \
+					 DCS_SW_1P_TX_LP | \
+					 DCS_SW_0P_TX_LP | \
+					 GEN_LW_TX_LP | \
+					 GEN_SR_2P_TX_LP | \
+					 GEN_SR_1P_TX_LP | \
+					 GEN_SR_0P_TX_LP | \
+					 GEN_SW_2P_TX_LP | \
+					 GEN_SW_1P_TX_LP | \
+					 GEN_SW_0P_TX_LP)
+
+#define DSI_GEN_HDR			0x6c
+#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
+#define GEN_HDATA_MASK			(0xffff << 8)
+#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
+#define GEN_HTYPE_MASK			0xff
+
+#define DSI_GEN_PLD_DATA		0x70
+
+#define DSI_CMD_PKT_STATUS		0x74
+#define GEN_CMD_EMPTY			BIT(0)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_RD_CMD_BUSY			BIT(6)
+
+#define DSI_TO_CNT_CFG			0x78
+#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
+#define LPRX_TO_CNT(p)			((p) & 0xffff)
+
+#define DSI_BTA_TO_CNT			0x8c
+#define DSI_LPCLK_CTRL			0x94
+#define AUTO_CLKLANE_CTRL		BIT(1)
+#define PHY_TXREQUESTCLKHS		BIT(0)
+
+#define DSI_PHY_TMR_LPCLK_CFG		0x98
+#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
+#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
+
+#define DSI_PHY_TMR_CFG			0x9c
+#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
+#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
+#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
+
+#define DSI_PHY_RSTZ			0xa0
+#define PHY_DISFORCEPLL			0
+#define PHY_ENFORCEPLL			BIT(3)
+#define PHY_DISABLECLK			0
+#define PHY_ENABLECLK			BIT(2)
+#define PHY_RSTZ			0
+#define PHY_UNRSTZ			BIT(1)
+#define PHY_SHUTDOWNZ			0
+#define PHY_UNSHUTDOWNZ			BIT(0)
+
+#define DSI_PHY_IF_CFG			0xa4
+#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
+#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+
+#define DSI_PHY_STATUS			0xb0
+#define LOCK				BIT(0)
+#define STOP_STATE_CLK_LANE		BIT(2)
+
+#define DSI_PHY_TST_CTRL0		0xb4
+#define PHY_TESTCLK			BIT(1)
+#define PHY_UNTESTCLK			0
+#define PHY_TESTCLR			BIT(0)
+#define PHY_UNTESTCLR			0
+
+#define DSI_PHY_TST_CTRL1		0xb8
+#define PHY_TESTEN			BIT(16)
+#define PHY_UNTESTEN			0
+#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
+#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
+
+#define DSI_INT_ST0			0xbc
+#define DSI_INT_ST1			0xc0
+#define DSI_INT_MSK0			0xc4
+#define DSI_INT_MSK1			0xc8
+
+#define PHY_STATUS_TIMEOUT_US		10000
+#define CMD_PKT_STATUS_TIMEOUT_US	20000
+
+struct dw_mipi_dsi {
+	struct drm_bridge bridge;
+	struct drm_connector connector;
+	struct mipi_dsi_host dsi_host;
+	struct drm_panel *panel;
+	struct device *dev;
+	void __iomem *base;
+
+	struct clk *pllref_clk;
+	struct clk *pclk;
+
+	int dpms_mode;
+	unsigned int lane_mbps; /* per lane */
+	u32 channel;
+	u32 lanes;
+	u32 format;
+	unsigned long mode_flags;
+
+	const struct dw_mipi_dsi_plat_data *plat_data;
+};
+
+enum dw_mipi_dsi_mode {
+	DW_MIPI_DSI_CMD_MODE,
+	DW_MIPI_DSI_VID_MODE,
+};
+
+/*
+ * The controller should generate 2 frames before
+ * preparing the peripheral.
+ */
+static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
+{
+	int refresh, two_frames;
+
+	refresh = drm_mode_vrefresh(mode);
+	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
+	msleep(two_frames);
+}
+
+static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
+{
+	return container_of(host, struct dw_mipi_dsi, dsi_host);
+}
+
+static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
+{
+	return container_of(con, struct dw_mipi_dsi, connector);
+}
+
+static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
+{
+	return container_of(bridge, struct dw_mipi_dsi, bridge);
+}
+
+static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
+{
+	writel_relaxed(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
+{
+	return readl_relaxed(dsi->base + reg);
+}
+
+static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	if (device->lanes > dsi->plat_data->max_data_lanes) {
+		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
+			device->lanes);
+		return -EINVAL;
+	}
+
+	dsi->lanes = device->lanes;
+	dsi->channel = device->channel;
+	dsi->format = device->format;
+	dsi->mode_flags = device->mode_flags;
+	dsi->panel = of_drm_find_panel(device->dev.of_node);
+	if (dsi->panel)
+		return drm_panel_attach(dsi->panel, &dsi->connector);
+
+	return -EINVAL;
+}
+
+static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
+				   struct mipi_dsi_device *device)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+
+	drm_panel_detach(dsi->panel);
+
+	return 0;
+}
+
+static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
+				   const struct mipi_dsi_msg *msg)
+{
+	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
+	u32 val = 0;
+
+	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
+		val |= EN_ACK_RQST;
+	if (lpm)
+		val |= CMD_MODE_ALL_LP;
+
+	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
+
+	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
+	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+
+	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+}
+
+static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
+{
+	int ret;
+	u32 val, mask;
+
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, !(val & GEN_CMD_FULL), 1000,
+				 CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		return ret;
+	}
+
+	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
+
+	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
+	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+				 val, (val & mask) == mask,
+				 1000, CMD_PKT_STATUS_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(dsi->dev, "failed to write command FIFO\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
+				       const struct mipi_dsi_msg *msg)
+{
+	const u8 *tx_buf = msg->tx_buf;
+	u16 data = 0;
+	u32 val;
+
+	if (msg->tx_len > 0)
+		data |= tx_buf[0];
+	if (msg->tx_len > 1)
+		data |= tx_buf[1] << 8;
+
+	if (msg->tx_len > 2) {
+		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
+			msg->tx_len);
+		return -EINVAL;
+	}
+
+	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
+}
+
+static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
+				      const struct mipi_dsi_msg *msg)
+{
+	const u8 *tx_buf = msg->tx_buf;
+	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
+	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
+	u32 remainder;
+	u32 val;
+
+	if (msg->tx_len < 3) {
+		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
+			msg->tx_len);
+		return -EINVAL;
+	}
+
+	while (DIV_ROUND_UP(len, pld_data_bytes)) {
+		if (len < pld_data_bytes) {
+			remainder = 0;
+			memcpy(&remainder, tx_buf, len);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+			len = 0;
+		} else {
+			memcpy(&remainder, tx_buf, pld_data_bytes);
+			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
+			tx_buf += pld_data_bytes;
+			len -= pld_data_bytes;
+		}
+
+		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
+					 val, !(val & GEN_PLD_W_FULL), 1000,
+					 CMD_PKT_STATUS_TIMEOUT_US);
+		if (ret < 0) {
+			dev_err(dsi->dev,
+				"failed to get available write payload FIFO\n");
+			return ret;
+		}
+	}
+
+	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
+}
+
+static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
+					 const struct mipi_dsi_msg *msg)
+{
+	struct dw_mipi_dsi *dsi = host_to_dsi(host);
+	int ret;
+
+	/*
+	 * todo dw drv improvements
+	 * use mipi_dsi_create_packet() instead of all following
+	 * functions and code (no switch cases, no
+	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
+	 * and use packet.header...
+	 */
+	dw_mipi_message_config(dsi, msg);
+
+	switch (msg->type) {
+	case MIPI_DSI_DCS_SHORT_WRITE:
+	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
+		break;
+	case MIPI_DSI_DCS_LONG_WRITE:
+		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
+		break;
+	default:
+		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
+			msg->type);
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
+	.attach = dw_mipi_dsi_host_attach,
+	.detach = dw_mipi_dsi_host_detach,
+	.transfer = dw_mipi_dsi_host_transfer,
+};
+
+static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
+{
+	u32 val;
+
+	/*
+	 * todo dw drv improvements
+	 * enabling low power is panel-dependent, we should use the
+	 * panel configuration here...
+	 */
+	val = ENABLE_LOW_POWER;
+
+	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
+		val |= VID_MODE_TYPE_BURST;
+	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
+	else
+		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, val);
+}
+
+static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
+				 enum dw_mipi_dsi_mode mode)
+{
+	if (mode == DW_MIPI_DSI_CMD_MODE) {
+		dsi_write(dsi, DSI_PWR_UP, RESET);
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+		dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	} else {
+		dsi_write(dsi, DSI_PWR_UP, RESET);
+		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
+		dw_mipi_dsi_video_mode_config(dsi);
+		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
+		dsi_write(dsi, DSI_PWR_UP, POWERUP);
+	}
+}
+
+static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
+}
+
+static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * The maximum permitted escape clock is 20MHz and it is derived from
+	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
+	 *
+	 *     (lane_mbps >> 3) / esc_clk_division < 20
+	 * which is:
+	 *     (lane_mbps >> 3) / 20 > esc_clk_division
+	 */
+	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
+
+	dsi_write(dsi, DSI_PWR_UP, RESET);
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
+		  | PHY_RSTZ | PHY_SHUTDOWNZ);
+	/*
+	 * todo dw drv improvements
+	 * timeout clock division should be computed with the
+	 * high speed transmission counter timeout and byte lane...
+	 */
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
+		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
+}
+
+static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
+				   struct drm_display_mode *mode)
+{
+	u32 val = 0, color = 0;
+
+	switch (dsi->format) {
+	case MIPI_DSI_FMT_RGB888:
+		color = DPI_COLOR_CODING_24BIT;
+		break;
+	case MIPI_DSI_FMT_RGB666:
+		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+		break;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		color = DPI_COLOR_CODING_18BIT_1;
+		break;
+	case MIPI_DSI_FMT_RGB565:
+		color = DPI_COLOR_CODING_16BIT_1;
+		break;
+	}
+
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		val |= VSYNC_ACTIVE_LOW;
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		val |= HSYNC_ACTIVE_LOW;
+
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
+	dsi_write(dsi, DSI_DPI_CFG_POL, val);
+	/*
+	 * todo dw drv improvements
+	 * largest packet sizes during hfp or during vsa/vpb/vfp
+	 * should be computed according to byte lane, lane number and only
+	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
+	 */
+	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
+		  | INVACT_LPCMD_TIME(4));
+}
+
+static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
+{
+	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+}
+
+static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
+					    struct drm_display_mode *mode)
+{
+	/*
+	 * todo dw drv improvements
+	 * only burst mode is supported here. For non-burst video modes,
+	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
+	 * DSI_VNPCR.NPSIZE... especially because this driver supports
+	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
+	 */
+	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
+}
+
+static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * todo dw drv improvements
+	 * compute high speed transmission counter timeout according
+	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
+	 */
+	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
+	/*
+	 * todo dw drv improvements
+	 * the Bus-Turn-Around Timeout Counter should be computed
+	 * according to byte lane...
+	 */
+	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
+	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
+}
+
+/* Get lane byte clock cycles. */
+static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+					   struct drm_display_mode *mode,
+					   u32 hcomponent)
+{
+	u32 frac, lbcc;
+
+	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
+
+	frac = lbcc % mode->clock;
+	lbcc = lbcc / mode->clock;
+	if (frac)
+		lbcc++;
+
+	return lbcc;
+}
+
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
+					  struct drm_display_mode *mode)
+{
+	u32 htotal, hsa, hbp, lbcc;
+
+	htotal = mode->htotal;
+	hsa = mode->hsync_end - mode->hsync_start;
+	hbp = mode->htotal - mode->hsync_end;
+
+	/*
+	 * todo dw drv improvements
+	 * computations below may be improved...
+	 */
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
+	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
+	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
+
+	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
+	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
+}
+
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
+					       struct drm_display_mode *mode)
+{
+	u32 vactive, vsa, vfp, vbp;
+
+	vactive = mode->vdisplay;
+	vsa = mode->vsync_end - mode->vsync_start;
+	vfp = mode->vsync_start - mode->vdisplay;
+	vbp = mode->vtotal - mode->vsync_end;
+
+	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
+	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
+	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
+	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
+}
+
+static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * todo dw drv improvements
+	 * data & clock lane timers should be computed according to panel
+	 * blankings and to the automatic clock lane control mode...
+	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
+	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
+	 */
+	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
+		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
+
+	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
+		  | PHY_CLKLP2HS_TIME(0x40));
+}
+
+static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
+{
+	/*
+	 * todo dw drv improvements
+	 * stop wait time should be the maximum between host dsi
+	 * and panel stop wait times
+	 */
+	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
+		  N_LANES(dsi->lanes));
+}
+
+static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
+{
+	dsi_read(dsi, DSI_INT_ST0);
+	dsi_read(dsi, DSI_INT_ST1);
+	dsi_write(dsi, DSI_INT_MSK0, 0);
+	dsi_write(dsi, DSI_INT_MSK1, 0);
+}
+
+static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+
+	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
+		return;
+
+	if (clk_enable(dsi->pclk)) {
+		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
+		return;
+	}
+
+	drm_panel_disable(dsi->panel);
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	drm_panel_unprepare(dsi->panel);
+
+	dw_mipi_dsi_disable(dsi);
+	pm_runtime_put(dsi->dev);
+	clk_disable(dsi->pclk);
+	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
+}
+
+static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_encoder *encoder = bridge->encoder;
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
+	void *priv_data = dsi->plat_data->priv_data;
+	int ret;
+
+	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
+		return;
+
+	if (clk_enable(dsi->pclk)) {
+		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
+		return;
+	}
+
+	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
+				     dsi->lanes, dsi->format, &dsi->lane_mbps);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
+
+	pm_runtime_get_sync(dsi->dev);
+	dw_mipi_dsi_init(dsi);
+	dw_mipi_dsi_dpi_config(dsi, mode);
+	dw_mipi_dsi_packet_handler_config(dsi);
+	dw_mipi_dsi_video_mode_config(dsi);
+	dw_mipi_dsi_video_packet_config(dsi, mode);
+	dw_mipi_dsi_command_mode_config(dsi);
+	dw_mipi_dsi_line_timer_config(dsi, mode);
+	dw_mipi_dsi_vertical_timing_config(dsi, mode);
+	dw_mipi_dsi_dphy_timing_config(dsi);
+	dw_mipi_dsi_dphy_interface_config(dsi);
+	dw_mipi_dsi_clear_err(dsi);
+
+	/*
+	 * todo dw drv improvements
+	 * following command is inside dw_mipi_dsi_phy_init()
+	 * but this function is also required here. We way move it in the
+	 * phy but here we are using dsi regs...
+	 * maybe add the waiting loop here too...
+	 */
+	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
+				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
+
+	ret = phy_ops->init(priv_data);
+	if (ret)
+		DRM_DEBUG_DRIVER("Phy init() failed\n");
+
+	dw_mipi_dsi_wait_for_two_frames(mode);
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
+	if (drm_panel_prepare(dsi->panel))
+		dev_err(dsi->dev, "failed to prepare panel\n");
+
+	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
+	drm_panel_enable(dsi->panel);
+
+	clk_disable(dsi->pclk);
+
+	dsi->dpms_mode = DRM_MODE_DPMS_ON;
+}
+
+static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+
+	return drm_panel_get_modes(dsi->panel);
+}
+
+static enum drm_mode_status
+dw_mipi_dsi_mode_valid(struct drm_connector *connector,
+		       struct drm_display_mode *mode)
+{
+	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
+	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
+	enum drm_mode_status mode_status = MODE_OK;
+
+	if (pdata->mode_valid)
+		mode_status = pdata->mode_valid(pdata->priv_data,
+						connector, mode);
+
+	return mode_status;
+}
+
+static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
+	.get_modes = dw_mipi_dsi_connector_get_modes,
+	.mode_valid = dw_mipi_dsi_mode_valid,
+};
+
+static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
+{
+	drm_connector_unregister(connector);
+	drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
+	.dpms = drm_atomic_helper_connector_dpms,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = dw_mipi_dsi_drm_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
+{
+	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
+	struct drm_connector *connector = &dsi->connector;
+
+	if (!bridge->encoder) {
+		DRM_ERROR("Parent encoder object not found\n");
+		return -ENODEV;
+	}
+
+	/* Set the encoder type as caller does not know it */
+	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
+
+	connector->polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(connector,
+				 &dw_mipi_dsi_connector_helper_funcs);
+
+	drm_connector_init(bridge->dev, connector,
+			   &dw_mipi_dsi_atomic_connector_funcs,
+			   DRM_MODE_CONNECTOR_DSI);
+
+	drm_mode_connector_attach_encoder(connector, bridge->encoder);
+
+	return 0;
+}
+
+static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
+	.enable = dw_mipi_dsi_bridge_enable,
+	.disable = dw_mipi_dsi_bridge_disable,
+	.attach = dw_mipi_dsi_bridge_attach,
+};
+
+static struct dw_mipi_dsi *
+__dw_mipi_dsi_probe(struct platform_device *pdev,
+		    const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct device *dev = &pdev->dev;
+	struct reset_control *apb_rst;
+	struct dw_mipi_dsi *dsi;
+	struct resource *res;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return ERR_PTR(-ENOMEM);
+
+	dsi->dev = dev;
+	dsi->plat_data = plat_data;
+	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
+
+	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
+		DRM_ERROR("Phy not properly configured\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	if (!plat_data->base) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return ERR_PTR(-ENODEV);
+
+		dsi->base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(dsi->base))
+			return ERR_PTR(-ENODEV);
+
+	} else {
+		dsi->base = plat_data->base;
+	}
+
+	dsi->pllref_clk = devm_clk_get(dev, "ref");
+	if (IS_ERR(dsi->pllref_clk)) {
+		ret = PTR_ERR(dsi->pllref_clk);
+		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	dsi->pclk = devm_clk_get(dev, "pclk");
+	if (IS_ERR(dsi->pclk)) {
+		ret = PTR_ERR(dsi->pclk);
+		dev_err(dev, "Unable to get pclk: %d\n", ret);
+		return ERR_PTR(ret);
+	}
+
+	/*
+	 * Note that the reset was not defined in the initial device tree, so
+	 * we have to be prepared for it not being found.
+	 */
+	apb_rst = devm_reset_control_get(dev, "apb");
+	if (IS_ERR(apb_rst)) {
+		ret = PTR_ERR(apb_rst);
+		if (ret == -ENOENT) {
+			apb_rst = NULL;
+		} else {
+			dev_err(dev, "Unable to get reset control: %d\n", ret);
+			return ERR_PTR(ret);
+		}
+	}
+
+	if (apb_rst) {
+		ret = clk_prepare_enable(dsi->pclk);
+		if (ret) {
+			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+			return ERR_PTR(ret);
+		}
+
+		reset_control_assert(apb_rst);
+		usleep_range(10, 20);
+		reset_control_deassert(apb_rst);
+
+		clk_disable(dsi->pclk);
+	}
+
+	ret = clk_prepare_enable(dsi->pllref_clk);
+	if (ret) {
+		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
+		return ERR_PTR(ret);
+	}
+
+	pm_runtime_enable(dev);
+
+	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
+	dsi->dsi_host.dev = dev;
+	ret = mipi_dsi_host_register(&dsi->dsi_host);
+	if (ret) {
+		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+		goto err_cleanup;
+	}
+
+	dsi->bridge.driver_private = dsi;
+	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
+#ifdef CONFIG_OF
+	dsi->bridge.of_node = pdev->dev.of_node;
+#endif
+
+	clk_enable(dsi->pclk);
+
+	dev_set_drvdata(dev, dsi);
+
+	return dsi;
+
+err_cleanup:
+	clk_disable_unprepare(dsi->pllref_clk);
+
+	return ERR_PTR(ret);
+}
+
+static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
+{
+	pm_runtime_disable(dsi->dev);
+	clk_disable_unprepare(dsi->pllref_clk);
+}
+
+/*
+ * Probe/remove API, used from platforms based on the DRM bridge API.
+ */
+int dw_mipi_dsi_probe(struct platform_device *pdev,
+		      const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct dw_mipi_dsi *dsi;
+	int ret;
+
+	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
+	if (IS_ERR(dsi))
+		return PTR_ERR(dsi);
+
+	ret = drm_bridge_add(&dsi->bridge);
+	if (ret < 0) {
+		__dw_mipi_dsi_remove(dsi);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
+
+void dw_mipi_dsi_remove(struct platform_device *pdev)
+{
+	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
+
+	mipi_dsi_host_unregister(&dsi->dsi_host);
+	drm_bridge_remove(&dsi->bridge);
+
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
+
+/*
+ * Bind/unbind API, used from platforms based on the component framework.
+ */
+int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
+		     const struct dw_mipi_dsi_plat_data *plat_data)
+{
+	struct dw_mipi_dsi *dsi;
+	int ret;
+
+	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
+	if (IS_ERR(dsi))
+		return PTR_ERR(dsi);
+
+	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
+	if (ret) {
+		dw_mipi_dsi_remove(pdev);
+		DRM_ERROR("Failed to initialize bridge with drm\n");
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
+
+void dw_mipi_dsi_unbind(struct device *dev)
+{
+	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
+
+	__dw_mipi_dsi_remove(dsi);
+}
+EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dw-mipi-dsi");
-- 
1.9.1

[PATCH v2 4/5] dt-bindings: display: Add STM32 DSI host driver

[Philippe CORNU]

This patch adds documentation of device tree bindings for the STM32
DSI host driver based on the Synopsys DW MIPI DSI driver from Rockchip.

Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
---
 .../devicetree/bindings/display/st,stm32-ltdc.txt  | 102 ++++++++++++++++++++-
 1 file changed, 100 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 8e14769..18a57a2 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -1,7 +1,6 @@
 * STMicroelectronics STM32 lcd-tft display controller
 
 - ltdc: lcd-tft display controller host
-  must be a sub-node of st-display-subsystem
   Required properties:
   - compatible: "st,stm32-ltdc"
   - reg: Physical base address of the IP registers and length of memory mapped region.
@@ -13,8 +12,37 @@
   Required nodes:
     - Video port for RGB output.
 
-Example:
+* STMicroelectronics STM32 specific extensions to Synopsys DesignWare MIPI DSI
 
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "st,stm32-dsi".
+- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
+- clocks: References to all the clocks specified in the clock-names property
+  as specified in [1].
+- clock-names: The DWC MIPI DSI host uses the following clocks.
+  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
+  - "ref" is the pll reference clock (mandatory).
+- resets: References to all the resets specified in the reset-names property
+  as specified in [2]. (optional)
+- reset-names: string reset name, must be "apb" if used. (optional)
+- ports: The connectivity of the DWC MIPI DSI host controller
+  with the rest of the system is expressed in using ports as specified in the
+  device graph bindings in [2].
+  - port@0 is the dsi input, connected to the ltdc output port.
+  - port@1 is the dsi output, connected to the dsi panel or bridge.
+
+Note: You can find more documentation related to the Synopsys DesignWare MIPI
+DSI host controller in [5].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/reset/reset.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/graph.txt
+[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+
+Example 1: RGB panel
 / {
 	...
 	soc {
@@ -34,3 +62,73 @@ Example:
 		};
 	};
 };
+
+Example 2: DSI panel
+
+/ {
+	...
+	soc {
+	...
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+
+			port {
+				ltdc_out_dsi: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+
+		dsi: dsi@40016C00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-dsi";
+			reg = <0x40016C00 0x800>;
+			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+			clock-names = "ref", "pclk";
+			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+			reset-names = "apb";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ltdc_out_dsi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out_panel: endpoint {
+						remote-endpoint = <&dsi_in_panel>;
+					};
+				};
+
+			};
+
+			panel-dsi@0 {
+				reg = <0>; /* dsi virtual channel (0..3) */
+				compatible = ...;
+				enable-gpios = ...;
+
+				port {
+					dsi_in_panel: endpoint {
+						remote-endpoint = <&dsi_out_panel>;
+					};
+				};
+
+			};
+
+		};
+
+	};
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/5] dt-bindings: display: Add STM32 DSI host driver

[Philippe CORNU]

This patch adds documentation of device tree bindings for the STM32
DSI host driver based on the Synopsys DW MIPI DSI driver from Rockchip.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 .../devicetree/bindings/display/st,stm32-ltdc.txt  | 102 ++++++++++++++++++++-
 1 file changed, 100 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 8e14769..18a57a2 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -1,7 +1,6 @@
 * STMicroelectronics STM32 lcd-tft display controller
 
 - ltdc: lcd-tft display controller host
-  must be a sub-node of st-display-subsystem
   Required properties:
   - compatible: "st,stm32-ltdc"
   - reg: Physical base address of the IP registers and length of memory mapped region.
@@ -13,8 +12,37 @@
   Required nodes:
     - Video port for RGB output.
 
-Example:
+* STMicroelectronics STM32 specific extensions to Synopsys DesignWare MIPI DSI
 
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "st,stm32-dsi".
+- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
+- clocks: References to all the clocks specified in the clock-names property
+  as specified in [1].
+- clock-names: The DWC MIPI DSI host uses the following clocks.
+  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
+  - "ref" is the pll reference clock (mandatory).
+- resets: References to all the resets specified in the reset-names property
+  as specified in [2]. (optional)
+- reset-names: string reset name, must be "apb" if used. (optional)
+- ports: The connectivity of the DWC MIPI DSI host controller
+  with the rest of the system is expressed in using ports as specified in the
+  device graph bindings in [2].
+  - port at 0 is the dsi input, connected to the ltdc output port.
+  - port at 1 is the dsi output, connected to the dsi panel or bridge.
+
+Note: You can find more documentation related to the Synopsys DesignWare MIPI
+DSI host controller in [5].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/reset/reset.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/graph.txt
+[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+
+Example 1: RGB panel
 / {
 	...
 	soc {
@@ -34,3 +62,73 @@ Example:
 		};
 	};
 };
+
+Example 2: DSI panel
+
+/ {
+	...
+	soc {
+	...
+		ltdc: display-controller at 40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+
+			port {
+				ltdc_out_dsi: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+
+		dsi: dsi at 40016C00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-dsi";
+			reg = <0x40016C00 0x800>;
+			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+			clock-names = "ref", "pclk";
+			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+			reset-names = "apb";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ltdc_out_dsi>;
+					};
+				};
+
+				port at 1 {
+					reg = <1>;
+					dsi_out_panel: endpoint {
+						remote-endpoint = <&dsi_in_panel>;
+					};
+				};
+
+			};
+
+			panel-dsi at 0 {
+				reg = <0>; /* dsi virtual channel (0..3) */
+				compatible = ...;
+				enable-gpios = ...;
+
+				port {
+					dsi_in_panel: endpoint {
+						remote-endpoint = <&dsi_out_panel>;
+					};
+				};
+
+			};
+
+		};
+
+	};
+};
-- 
1.9.1

[PATCH v2 5/5] drm/stm: Add STM32 DSI host driver

[Philippe CORNU]

Add the STM32 DSI host driver that uses the Synopsys DesignWare
MIPI DSI DRM bridge.

Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
---
 drivers/gpu/drm/stm/Kconfig           |   8 +
 drivers/gpu/drm/stm/Makefile          |   2 +
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 328 ++++++++++++++++++++++++++++++++++
 3 files changed, 338 insertions(+)
 create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c

diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig
index 2c4817f..cbda4df 100644
--- a/drivers/gpu/drm/stm/Kconfig
+++ b/drivers/gpu/drm/stm/Kconfig
@@ -14,3 +14,11 @@ config DRM_STM
 	  STMicroelectronics STM32 MCUs.
 	  To compile this driver as a module, choose M here: the module
 	  will be called stm-drm.
+
+config DRM_STM_DSI
+	tristate "STMicroelectronics specific extensions for Synopsys MIPI DSI"
+	depends on DRM_STM
+	select DRM_MIPI_DSI
+	select DRM_DW_MIPI_DSI
+	help
+	  Choose this option for MIPI DSI support on STMicroelectronics SoC.
diff --git a/drivers/gpu/drm/stm/Makefile b/drivers/gpu/drm/stm/Makefile
index e114d45..8730a59 100644
--- a/drivers/gpu/drm/stm/Makefile
+++ b/drivers/gpu/drm/stm/Makefile
@@ -4,4 +4,6 @@ stm-drm-y := \
 	drv.o \
 	ltdc.o
 
+obj-$(CONFIG_DRM_STM_DSI) += dw_mipi_dsi-stm.o
+
 obj-$(CONFIG_DRM_STM) += stm-drm.o
diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
new file mode 100644
index 0000000..914f203
--- /dev/null
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Authors: Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>
+ *          Yannick Fertre <yannick.fertre-qxv4g6HH51o@public.gmane.org>
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <video/mipi_display.h>
+
+/* DSI wrapper register & bit definitions */
+/* Note: registers are named as in the Reference Manual */
+#define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
+#define WCFGR_DSIM	BIT(0)		/* DSI Mode */
+#define WCFGR_COLMUX	GENMASK(3, 1)	/* COLor MUltipleXing */
+
+#define DSI_WCR		0x0404		/* Wrapper Control Reg */
+#define WCR_DSIEN	BIT(3)		/* DSI ENable */
+
+#define DSI_WISR	0x040C		/* Wrapper Interrupt and Status Reg */
+#define WISR_PLLLS	BIT(8)		/* PLL Lock Status */
+#define WISR_RRS	BIT(12)		/* Regulator Ready Status */
+
+#define DSI_WPCR0	0x0418		/* Wrapper Phy Conf Reg 0 */
+#define WPCR0_UIX4	GENMASK(5, 0)	/* Unit Interval X 4 */
+#define WPCR0_TDDL	BIT(16)		/* Turn Disable Data Lanes */
+
+#define DSI_WRPCR	0x0430		/* Wrapper Regulator & Pll Ctrl Reg */
+#define WRPCR_PLLEN	BIT(0)		/* PLL ENable */
+#define WRPCR_NDIV	GENMASK(8, 2)	/* pll loop DIVision Factor */
+#define WRPCR_IDF	GENMASK(14, 11)	/* pll Input Division Factor */
+#define WRPCR_ODF	GENMASK(17, 16)	/* pll Output Division Factor */
+#define WRPCR_REGEN	BIT(24)		/* REGulator ENable */
+#define WRPCR_BGREN	BIT(28)		/* BandGap Reference ENable */
+#define IDF_MIN		1
+#define IDF_MAX		7
+#define NDIV_MIN	10
+#define NDIV_MAX	125
+#define ODF_MIN		1
+#define ODF_MAX		8
+
+/* dsi color format coding according to the datasheet */
+enum dsi_color {
+	DSI_RGB565_CONF1, DSI_RGB565_CONF2, DSI_RGB565_CONF3,
+	DSI_RGB666_CONF1, DSI_RGB666_CONF2,
+	DSI_RGB888,
+};
+
+#define LANE_MIN_KBPS	31250
+#define LANE_MAX_KBPS	500000
+
+/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
+#define SLEEP_US	1000
+#define TIMEOUT_US	200000
+
+struct dw_mipi_dsi_stm {
+	void __iomem *base;
+};
+
+static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
+{
+	writel_relaxed(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
+{
+	return readl_relaxed(dsi->base + reg);
+}
+
+static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
+{
+	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
+}
+
+static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
+{
+	dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
+}
+
+static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
+				   u32 mask, u32 val)
+{
+	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
+}
+
+static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
+{
+	switch (fmt) {
+	case MIPI_DSI_FMT_RGB888:
+		return DSI_RGB888;
+	case MIPI_DSI_FMT_RGB666:
+		return DSI_RGB666_CONF2;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return DSI_RGB666_CONF1;
+	case MIPI_DSI_FMT_RGB565:
+		return DSI_RGB565_CONF1;
+	default:
+		DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
+	}
+	return DSI_RGB888;
+}
+
+static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
+{
+	/* prevent from division by 0 */
+	if (idf * odf)
+		return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf);
+	else
+		return 0;
+}
+
+static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
+			      int *idf, int *ndiv, int *odf)
+{
+	int i, o, n, n_min, n_max;
+	int fvco_min, fvco_max, delta, best_delta; /* all in khz */
+
+	/* Early checks preventing division by 0 & odd results */
+	if ((clkin_khz <= 0) || (clkout_khz <= 0))
+		return 0;
+
+	fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
+	fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
+
+	best_delta = 1000000; /* big started value (1000000khz) */
+
+	for (i = IDF_MIN; i <= IDF_MAX; i++) {
+		/* Compute ndiv range according to Fvco */
+		n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
+		n_max = (fvco_max * i) / (2 * clkin_khz);
+
+		/* No need to continue idf loop if we reach ndiv max */
+		if (n_min >= NDIV_MAX)
+			break;
+
+		/* Clamp ndiv to valid values */
+		if (n_min < NDIV_MIN)
+			n_min = NDIV_MIN;
+		if (n_max > NDIV_MAX)
+			n_max = NDIV_MAX;
+
+		for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
+			n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
+			/* Check ndiv according to vco range */
+			if ((n < n_min) || (n > n_max))
+				continue;
+			/* Check if new delta is better & saves parameters */
+			delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
+				clkout_khz;
+			if (delta < 0)
+				delta = -delta;
+			if (delta < best_delta) {
+				*idf = i;
+				*ndiv = n;
+				*odf = o;
+				best_delta = delta;
+			}
+			/* fast return in case of "perfect result" */
+			if (!delta)
+				return 1;
+		}
+	}
+
+	return 1;
+}
+
+static int dw_mipi_dsi_phy_init(void *priv_data)
+{
+	struct dw_mipi_dsi_stm *dsi = priv_data;
+	u32 val;
+	int ret;
+
+	/* Enable the regulator */
+	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
+	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
+				 SLEEP_US, TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
+
+	/* Enable the DSI PLL & wait for its lock */
+	dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
+	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
+				 SLEEP_US, TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
+
+	/* Enable the DSI wrapper */
+	dsi_set(dsi, DSI_WCR, WCR_DSIEN);
+
+	return 0;
+}
+
+static int
+dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
+			  struct clk *input_clk, u32 lanes, u32 format,
+			  unsigned int *lane_mbps)
+{
+	struct dw_mipi_dsi_stm *dsi = priv_data;
+	unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
+	int bpp;
+	u32 val;
+
+	pll_in_khz = (unsigned int)(clk_get_rate(input_clk) / 1000);
+
+	/* Compute requested pll out */
+	bpp = mipi_dsi_pixel_format_to_bpp(format);
+	pll_out_khz = mode->clock * bpp / lanes;
+	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
+	pll_out_khz = (pll_out_khz * 12) / 10;
+	if (pll_out_khz > LANE_MAX_KBPS) {
+		pll_out_khz = LANE_MAX_KBPS;
+		DRM_DEBUG_DRIVER("Warning max phy mbps is used\n");
+	} else if (pll_out_khz < LANE_MIN_KBPS) {
+		pll_out_khz = LANE_MIN_KBPS;
+		DRM_DEBUG_DRIVER("Warning min phy mbps is used\n");
+	}
+
+	/* Compute best pll parameters */
+	dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
+
+	/* Get the adjusted pll out value */
+	pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
+
+	/* Set the PLL division factors */
+	dsi_update_bits(dsi, DSI_WRPCR,	WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
+			(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
+
+	/* Compute uix4 & set the bit period in high-speed mode */
+	val = 4000000 / pll_out_khz;
+	dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
+
+	/* Select video mode by resetting DSIM bit */
+	dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
+
+	/* Select the color coding */
+	dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
+			dsi_color_from_mipi(format) << 1);
+
+	*lane_mbps = pll_out_khz / 1000;
+
+	DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
+			 pll_in_khz, pll_out_khz, *lane_mbps);
+
+	return 0;
+}
+
+static struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
+	.init = dw_mipi_dsi_phy_init,
+	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
+};
+
+static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
+	.max_data_lanes = 2,
+	.phy_ops = &dw_mipi_dsi_stm_phy_ops,
+};
+
+static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
+	{
+	 .compatible = "st,stm32-dsi",
+	 .data = &dw_mipi_dsi_stm_plat_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
+
+static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_mipi_dsi_stm *dsi;
+	struct resource *res;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		DRM_ERROR("Unable to get resource\n");
+		return -ENODEV;
+	}
+
+	dsi->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(dsi->base)) {
+		DRM_ERROR("Unable to get dsi registers\n");
+		return PTR_ERR(dsi->base);
+	}
+
+	dw_mipi_dsi_stm_plat_data.base = dsi->base;
+	dw_mipi_dsi_stm_plat_data.priv_data = dsi;
+
+	ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
+	if (ret)
+		DRM_ERROR("Failed to initialize mipi dsi host\n");
+
+	return ret;
+}
+
+static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
+{
+	dw_mipi_dsi_remove(pdev);
+
+	return 0;
+}
+
+static struct platform_driver dw_mipi_dsi_stm_driver = {
+	.probe		= dw_mipi_dsi_stm_probe,
+	.remove		= dw_mipi_dsi_stm_remove,
+	.driver		= {
+		.of_match_table = dw_mipi_dsi_stm_dt_ids,
+		.name	= "dw_mipi_dsi-stm",
+	},
+};
+
+module_platform_driver(dw_mipi_dsi_stm_driver);
+
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre-qxv4g6HH51o@public.gmane.org>");
+MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 5/5] drm/stm: Add STM32 DSI host driver

[Philippe CORNU]

Add the STM32 DSI host driver that uses the Synopsys DesignWare
MIPI DSI DRM bridge.

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
---
 drivers/gpu/drm/stm/Kconfig           |   8 +
 drivers/gpu/drm/stm/Makefile          |   2 +
 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 328 ++++++++++++++++++++++++++++++++++
 3 files changed, 338 insertions(+)
 create mode 100644 drivers/gpu/drm/stm/dw_mipi_dsi-stm.c

diff --git a/drivers/gpu/drm/stm/Kconfig b/drivers/gpu/drm/stm/Kconfig
index 2c4817f..cbda4df 100644
--- a/drivers/gpu/drm/stm/Kconfig
+++ b/drivers/gpu/drm/stm/Kconfig
@@ -14,3 +14,11 @@ config DRM_STM
 	  STMicroelectronics STM32 MCUs.
 	  To compile this driver as a module, choose M here: the module
 	  will be called stm-drm.
+
+config DRM_STM_DSI
+	tristate "STMicroelectronics specific extensions for Synopsys MIPI DSI"
+	depends on DRM_STM
+	select DRM_MIPI_DSI
+	select DRM_DW_MIPI_DSI
+	help
+	  Choose this option for MIPI DSI support on STMicroelectronics SoC.
diff --git a/drivers/gpu/drm/stm/Makefile b/drivers/gpu/drm/stm/Makefile
index e114d45..8730a59 100644
--- a/drivers/gpu/drm/stm/Makefile
+++ b/drivers/gpu/drm/stm/Makefile
@@ -4,4 +4,6 @@ stm-drm-y := \
 	drv.o \
 	ltdc.o
 
+obj-$(CONFIG_DRM_STM_DSI) += dw_mipi_dsi-stm.o
+
 obj-$(CONFIG_DRM_STM) += stm-drm.o
diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
new file mode 100644
index 0000000..914f203
--- /dev/null
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Authors: Philippe Cornu <philippe.cornu@st.com>
+ *          Yannick Fertre <yannick.fertre@st.com>
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/bridge/dw_mipi_dsi.h>
+#include <video/mipi_display.h>
+
+/* DSI wrapper register & bit definitions */
+/* Note: registers are named as in the Reference Manual */
+#define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
+#define WCFGR_DSIM	BIT(0)		/* DSI Mode */
+#define WCFGR_COLMUX	GENMASK(3, 1)	/* COLor MUltipleXing */
+
+#define DSI_WCR		0x0404		/* Wrapper Control Reg */
+#define WCR_DSIEN	BIT(3)		/* DSI ENable */
+
+#define DSI_WISR	0x040C		/* Wrapper Interrupt and Status Reg */
+#define WISR_PLLLS	BIT(8)		/* PLL Lock Status */
+#define WISR_RRS	BIT(12)		/* Regulator Ready Status */
+
+#define DSI_WPCR0	0x0418		/* Wrapper Phy Conf Reg 0 */
+#define WPCR0_UIX4	GENMASK(5, 0)	/* Unit Interval X 4 */
+#define WPCR0_TDDL	BIT(16)		/* Turn Disable Data Lanes */
+
+#define DSI_WRPCR	0x0430		/* Wrapper Regulator & Pll Ctrl Reg */
+#define WRPCR_PLLEN	BIT(0)		/* PLL ENable */
+#define WRPCR_NDIV	GENMASK(8, 2)	/* pll loop DIVision Factor */
+#define WRPCR_IDF	GENMASK(14, 11)	/* pll Input Division Factor */
+#define WRPCR_ODF	GENMASK(17, 16)	/* pll Output Division Factor */
+#define WRPCR_REGEN	BIT(24)		/* REGulator ENable */
+#define WRPCR_BGREN	BIT(28)		/* BandGap Reference ENable */
+#define IDF_MIN		1
+#define IDF_MAX		7
+#define NDIV_MIN	10
+#define NDIV_MAX	125
+#define ODF_MIN		1
+#define ODF_MAX		8
+
+/* dsi color format coding according to the datasheet */
+enum dsi_color {
+	DSI_RGB565_CONF1, DSI_RGB565_CONF2, DSI_RGB565_CONF3,
+	DSI_RGB666_CONF1, DSI_RGB666_CONF2,
+	DSI_RGB888,
+};
+
+#define LANE_MIN_KBPS	31250
+#define LANE_MAX_KBPS	500000
+
+/* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
+#define SLEEP_US	1000
+#define TIMEOUT_US	200000
+
+struct dw_mipi_dsi_stm {
+	void __iomem *base;
+};
+
+static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
+{
+	writel_relaxed(val, dsi->base + reg);
+}
+
+static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
+{
+	return readl_relaxed(dsi->base + reg);
+}
+
+static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
+{
+	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
+}
+
+static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
+{
+	dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
+}
+
+static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
+				   u32 mask, u32 val)
+{
+	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
+}
+
+static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
+{
+	switch (fmt) {
+	case MIPI_DSI_FMT_RGB888:
+		return DSI_RGB888;
+	case MIPI_DSI_FMT_RGB666:
+		return DSI_RGB666_CONF2;
+	case MIPI_DSI_FMT_RGB666_PACKED:
+		return DSI_RGB666_CONF1;
+	case MIPI_DSI_FMT_RGB565:
+		return DSI_RGB565_CONF1;
+	default:
+		DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
+	}
+	return DSI_RGB888;
+}
+
+static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
+{
+	/* prevent from division by 0 */
+	if (idf * odf)
+		return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf);
+	else
+		return 0;
+}
+
+static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
+			      int *idf, int *ndiv, int *odf)
+{
+	int i, o, n, n_min, n_max;
+	int fvco_min, fvco_max, delta, best_delta; /* all in khz */
+
+	/* Early checks preventing division by 0 & odd results */
+	if ((clkin_khz <= 0) || (clkout_khz <= 0))
+		return 0;
+
+	fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
+	fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
+
+	best_delta = 1000000; /* big started value (1000000khz) */
+
+	for (i = IDF_MIN; i <= IDF_MAX; i++) {
+		/* Compute ndiv range according to Fvco */
+		n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
+		n_max = (fvco_max * i) / (2 * clkin_khz);
+
+		/* No need to continue idf loop if we reach ndiv max */
+		if (n_min >= NDIV_MAX)
+			break;
+
+		/* Clamp ndiv to valid values */
+		if (n_min < NDIV_MIN)
+			n_min = NDIV_MIN;
+		if (n_max > NDIV_MAX)
+			n_max = NDIV_MAX;
+
+		for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
+			n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
+			/* Check ndiv according to vco range */
+			if ((n < n_min) || (n > n_max))
+				continue;
+			/* Check if new delta is better & saves parameters */
+			delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
+				clkout_khz;
+			if (delta < 0)
+				delta = -delta;
+			if (delta < best_delta) {
+				*idf = i;
+				*ndiv = n;
+				*odf = o;
+				best_delta = delta;
+			}
+			/* fast return in case of "perfect result" */
+			if (!delta)
+				return 1;
+		}
+	}
+
+	return 1;
+}
+
+static int dw_mipi_dsi_phy_init(void *priv_data)
+{
+	struct dw_mipi_dsi_stm *dsi = priv_data;
+	u32 val;
+	int ret;
+
+	/* Enable the regulator */
+	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
+	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
+				 SLEEP_US, TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
+
+	/* Enable the DSI PLL & wait for its lock */
+	dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
+	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
+				 SLEEP_US, TIMEOUT_US);
+	if (ret)
+		DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
+
+	/* Enable the DSI wrapper */
+	dsi_set(dsi, DSI_WCR, WCR_DSIEN);
+
+	return 0;
+}
+
+static int
+dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
+			  struct clk *input_clk, u32 lanes, u32 format,
+			  unsigned int *lane_mbps)
+{
+	struct dw_mipi_dsi_stm *dsi = priv_data;
+	unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
+	int bpp;
+	u32 val;
+
+	pll_in_khz = (unsigned int)(clk_get_rate(input_clk) / 1000);
+
+	/* Compute requested pll out */
+	bpp = mipi_dsi_pixel_format_to_bpp(format);
+	pll_out_khz = mode->clock * bpp / lanes;
+	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
+	pll_out_khz = (pll_out_khz * 12) / 10;
+	if (pll_out_khz > LANE_MAX_KBPS) {
+		pll_out_khz = LANE_MAX_KBPS;
+		DRM_DEBUG_DRIVER("Warning max phy mbps is used\n");
+	} else if (pll_out_khz < LANE_MIN_KBPS) {
+		pll_out_khz = LANE_MIN_KBPS;
+		DRM_DEBUG_DRIVER("Warning min phy mbps is used\n");
+	}
+
+	/* Compute best pll parameters */
+	dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
+
+	/* Get the adjusted pll out value */
+	pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
+
+	/* Set the PLL division factors */
+	dsi_update_bits(dsi, DSI_WRPCR,	WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
+			(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
+
+	/* Compute uix4 & set the bit period in high-speed mode */
+	val = 4000000 / pll_out_khz;
+	dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
+
+	/* Select video mode by resetting DSIM bit */
+	dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
+
+	/* Select the color coding */
+	dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
+			dsi_color_from_mipi(format) << 1);
+
+	*lane_mbps = pll_out_khz / 1000;
+
+	DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
+			 pll_in_khz, pll_out_khz, *lane_mbps);
+
+	return 0;
+}
+
+static struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
+	.init = dw_mipi_dsi_phy_init,
+	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
+};
+
+static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
+	.max_data_lanes = 2,
+	.phy_ops = &dw_mipi_dsi_stm_phy_ops,
+};
+
+static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
+	{
+	 .compatible = "st,stm32-dsi",
+	 .data = &dw_mipi_dsi_stm_plat_data,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
+
+static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dw_mipi_dsi_stm *dsi;
+	struct resource *res;
+	int ret;
+
+	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+	if (!dsi)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		DRM_ERROR("Unable to get resource\n");
+		return -ENODEV;
+	}
+
+	dsi->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(dsi->base)) {
+		DRM_ERROR("Unable to get dsi registers\n");
+		return PTR_ERR(dsi->base);
+	}
+
+	dw_mipi_dsi_stm_plat_data.base = dsi->base;
+	dw_mipi_dsi_stm_plat_data.priv_data = dsi;
+
+	ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
+	if (ret)
+		DRM_ERROR("Failed to initialize mipi dsi host\n");
+
+	return ret;
+}
+
+static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
+{
+	dw_mipi_dsi_remove(pdev);
+
+	return 0;
+}
+
+static struct platform_driver dw_mipi_dsi_stm_driver = {
+	.probe		= dw_mipi_dsi_stm_probe,
+	.remove		= dw_mipi_dsi_stm_remove,
+	.driver		= {
+		.of_match_table = dw_mipi_dsi_stm_dt_ids,
+		.name	= "dw_mipi_dsi-stm",
+	},
+};
+
+module_platform_driver(dw_mipi_dsi_stm_driver);
+
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

Re: [PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Neil Armstrong]

On 05/19/2017 05:20 PM, Philippe CORNU wrote:
> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
> ---
>  drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>  drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>  drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>  3 files changed, 1035 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
> index 40d2827..d7fbdff 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>  	help
>  	  Support the I2S Audio interface which is part of the Synopsys
>  	  Designware HDMI block.
> +
> +config DRM_DW_MIPI_DSI
> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
> +	select DRM_KMS_HELPER
> +	select DRM_MIPI_DSI
> +	select DRM_PANEL
> +	help
> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
> +	  controller bridge.
> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
> index 17aa7a6..5f57d36 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
> @@ -3,3 +3,5 @@
>  obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>  obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>  obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
> +
> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> new file mode 100644
> index 0000000..041f564
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -0,0 +1,1024 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Modified by Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>
> + * This generic Synopsys Designware MIPI DSI host driver is based on the
> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <video/mipi_display.h>
> +
> +#define DSI_VERSION			0x00
> +#define DSI_PWR_UP			0x04
> +#define RESET				0
> +#define POWERUP				BIT(0)
> +
> +#define DSI_CLKMGR_CFG			0x08
> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
> +
> +#define DSI_DPI_VCID			0x0c
> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
> +
> +#define DSI_DPI_COLOR_CODING		0x10
> +#define EN18_LOOSELY			BIT(8)
> +#define DPI_COLOR_CODING_16BIT_1	0x0
> +#define DPI_COLOR_CODING_16BIT_2	0x1
> +#define DPI_COLOR_CODING_16BIT_3	0x2
> +#define DPI_COLOR_CODING_18BIT_1	0x3
> +#define DPI_COLOR_CODING_18BIT_2	0x4
> +#define DPI_COLOR_CODING_24BIT		0x5
> +
> +#define DSI_DPI_CFG_POL			0x14
> +#define COLORM_ACTIVE_LOW		BIT(4)
> +#define SHUTD_ACTIVE_LOW		BIT(3)
> +#define HSYNC_ACTIVE_LOW		BIT(2)
> +#define VSYNC_ACTIVE_LOW		BIT(1)
> +#define DATAEN_ACTIVE_LOW		BIT(0)
> +
> +#define DSI_DPI_LP_CMD_TIM		0x18
> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
> +
> +#define DSI_DBI_CFG			0x20
> +#define DSI_DBI_CMDSIZE			0x28
> +
> +#define DSI_PCKHDL_CFG			0x2c
> +#define EN_CRC_RX			BIT(4)
> +#define EN_ECC_RX			BIT(3)
> +#define EN_BTA				BIT(2)
> +#define EN_EOTP_RX			BIT(1)
> +#define EN_EOTP_TX			BIT(0)
> +
> +#define DSI_MODE_CFG			0x34
> +#define ENABLE_VIDEO_MODE		0
> +#define ENABLE_CMD_MODE			BIT(0)
> +
> +#define DSI_VID_MODE_CFG		0x38
> +#define FRAME_BTA_ACK			BIT(14)
> +#define ENABLE_LOW_POWER		(0x3f << 8)
> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
> +#define VID_MODE_TYPE_BURST			0x2
> +#define VID_MODE_TYPE_MASK			0x3
> +
> +#define DSI_VID_PKT_SIZE		0x3c
> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
> +#define VID_PKT_MAX_SIZE		0x3fff
> +
> +#define DSI_VID_HSA_TIME		0x48
> +#define DSI_VID_HBP_TIME		0x4c
> +#define DSI_VID_HLINE_TIME		0x50
> +#define DSI_VID_VSA_LINES		0x54
> +#define DSI_VID_VBP_LINES		0x58
> +#define DSI_VID_VFP_LINES		0x5c
> +#define DSI_VID_VACTIVE_LINES		0x60
> +#define DSI_CMD_MODE_CFG		0x68
> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
> +#define DCS_LW_TX_LP			BIT(19)
> +#define DCS_SR_0P_TX_LP			BIT(18)
> +#define DCS_SW_1P_TX_LP			BIT(17)
> +#define DCS_SW_0P_TX_LP			BIT(16)
> +#define GEN_LW_TX_LP			BIT(14)
> +#define GEN_SR_2P_TX_LP			BIT(13)
> +#define GEN_SR_1P_TX_LP			BIT(12)
> +#define GEN_SR_0P_TX_LP			BIT(11)
> +#define GEN_SW_2P_TX_LP			BIT(10)
> +#define GEN_SW_1P_TX_LP			BIT(9)
> +#define GEN_SW_0P_TX_LP			BIT(8)
> +#define EN_ACK_RQST			BIT(1)
> +#define EN_TEAR_FX			BIT(0)
> +
> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
> +					 DCS_LW_TX_LP | \
> +					 DCS_SR_0P_TX_LP | \
> +					 DCS_SW_1P_TX_LP | \
> +					 DCS_SW_0P_TX_LP | \
> +					 GEN_LW_TX_LP | \
> +					 GEN_SR_2P_TX_LP | \
> +					 GEN_SR_1P_TX_LP | \
> +					 GEN_SR_0P_TX_LP | \
> +					 GEN_SW_2P_TX_LP | \
> +					 GEN_SW_1P_TX_LP | \
> +					 GEN_SW_0P_TX_LP)
> +
> +#define DSI_GEN_HDR			0x6c
> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
> +#define GEN_HDATA_MASK			(0xffff << 8)
> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
> +#define GEN_HTYPE_MASK			0xff
> +
> +#define DSI_GEN_PLD_DATA		0x70
> +
> +#define DSI_CMD_PKT_STATUS		0x74
> +#define GEN_CMD_EMPTY			BIT(0)
> +#define GEN_CMD_FULL			BIT(1)
> +#define GEN_PLD_W_EMPTY			BIT(2)
> +#define GEN_PLD_W_FULL			BIT(3)
> +#define GEN_PLD_R_EMPTY			BIT(4)
> +#define GEN_PLD_R_FULL			BIT(5)
> +#define GEN_RD_CMD_BUSY			BIT(6)
> +
> +#define DSI_TO_CNT_CFG			0x78
> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
> +
> +#define DSI_BTA_TO_CNT			0x8c
> +#define DSI_LPCLK_CTRL			0x94
> +#define AUTO_CLKLANE_CTRL		BIT(1)
> +#define PHY_TXREQUESTCLKHS		BIT(0)
> +
> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
> +
> +#define DSI_PHY_TMR_CFG			0x9c
> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
> +
> +#define DSI_PHY_RSTZ			0xa0
> +#define PHY_DISFORCEPLL			0
> +#define PHY_ENFORCEPLL			BIT(3)
> +#define PHY_DISABLECLK			0
> +#define PHY_ENABLECLK			BIT(2)
> +#define PHY_RSTZ			0
> +#define PHY_UNRSTZ			BIT(1)
> +#define PHY_SHUTDOWNZ			0
> +#define PHY_UNSHUTDOWNZ			BIT(0)
> +
> +#define DSI_PHY_IF_CFG			0xa4
> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
> +
> +#define DSI_PHY_STATUS			0xb0
> +#define LOCK				BIT(0)
> +#define STOP_STATE_CLK_LANE		BIT(2)
> +
> +#define DSI_PHY_TST_CTRL0		0xb4
> +#define PHY_TESTCLK			BIT(1)
> +#define PHY_UNTESTCLK			0
> +#define PHY_TESTCLR			BIT(0)
> +#define PHY_UNTESTCLR			0
> +
> +#define DSI_PHY_TST_CTRL1		0xb8
> +#define PHY_TESTEN			BIT(16)
> +#define PHY_UNTESTEN			0
> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
> +
> +#define DSI_INT_ST0			0xbc
> +#define DSI_INT_ST1			0xc0
> +#define DSI_INT_MSK0			0xc4
> +#define DSI_INT_MSK1			0xc8
> +
> +#define PHY_STATUS_TIMEOUT_US		10000
> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
> +
> +struct dw_mipi_dsi {
> +	struct drm_bridge bridge;
> +	struct drm_connector connector;
> +	struct mipi_dsi_host dsi_host;
> +	struct drm_panel *panel;
> +	struct device *dev;
> +	void __iomem *base;
> +
> +	struct clk *pllref_clk;
> +	struct clk *pclk;
> +
> +	int dpms_mode;
> +	unsigned int lane_mbps; /* per lane */
> +	u32 channel;
> +	u32 lanes;
> +	u32 format;
> +	unsigned long mode_flags;
> +
> +	const struct dw_mipi_dsi_plat_data *plat_data;
> +};
> +
> +enum dw_mipi_dsi_mode {
> +	DW_MIPI_DSI_CMD_MODE,
> +	DW_MIPI_DSI_VID_MODE,
> +};
> +
> +/*
> + * The controller should generate 2 frames before
> + * preparing the peripheral.
> + */
> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
> +{
> +	int refresh, two_frames;
> +
> +	refresh = drm_mode_vrefresh(mode);
> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> +	msleep(two_frames);
> +}
> +
> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
> +{
> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
> +}
> +
> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
> +{
> +	return container_of(con, struct dw_mipi_dsi, connector);
> +}
> +
> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
> +}
> +
> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> +{
> +	return readl_relaxed(dsi->base + reg);
> +}
> +
> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
> +			device->lanes);
> +		return -EINVAL;
> +	}
> +
> +	dsi->lanes = device->lanes;
> +	dsi->channel = device->channel;
> +	dsi->format = device->format;
> +	dsi->mode_flags = device->mode_flags;
> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
> +	if (dsi->panel)
> +		return drm_panel_attach(dsi->panel, &dsi->connector);
> +
> +	return -EINVAL;
> +}
> +
> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	drm_panel_detach(dsi->panel);
> +
> +	return 0;
> +}
> +
> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> +				   const struct mipi_dsi_msg *msg)
> +{
> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> +	u32 val = 0;
> +
> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> +		val |= EN_ACK_RQST;
> +	if (lpm)
> +		val |= CMD_MODE_ALL_LP;
> +
> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> +
> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +
> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> +}
> +
> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
> +{
> +	int ret;
> +	u32 val, mask;
> +
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, !(val & GEN_CMD_FULL), 1000,
> +				 CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
> +		return ret;
> +	}
> +
> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
> +
> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, (val & mask) == mask,
> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to write command FIFO\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> +				       const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	u16 data = 0;
> +	u32 val;
> +
> +	if (msg->tx_len > 0)
> +		data |= tx_buf[0];
> +	if (msg->tx_len > 1)
> +		data |= tx_buf[1] << 8;
> +
> +	if (msg->tx_len > 2) {
> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> +}
> +
> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> +				      const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> +	u32 remainder;
> +	u32 val;
> +
> +	if (msg->tx_len < 3) {
> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
> +		if (len < pld_data_bytes) {
> +			remainder = 0;
> +			memcpy(&remainder, tx_buf, len);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			len = 0;
> +		} else {
> +			memcpy(&remainder, tx_buf, pld_data_bytes);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			tx_buf += pld_data_bytes;
> +			len -= pld_data_bytes;
> +		}
> +
> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +					 val, !(val & GEN_PLD_W_FULL), 1000,
> +					 CMD_PKT_STATUS_TIMEOUT_US);
> +		if (ret < 0) {
> +			dev_err(dsi->dev,
> +				"failed to get available write payload FIFO\n");
> +			return ret;
> +		}
> +	}
> +
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
> +}
> +
> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
> +					 const struct mipi_dsi_msg *msg)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +	int ret;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * use mipi_dsi_create_packet() instead of all following
> +	 * functions and code (no switch cases, no
> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
> +	 * and use packet.header...
> +	 */
> +	dw_mipi_message_config(dsi, msg);
> +
> +	switch (msg->type) {
> +	case MIPI_DSI_DCS_SHORT_WRITE:
> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
> +		break;
> +	case MIPI_DSI_DCS_LONG_WRITE:
> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
> +		break;
> +	default:
> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
> +			msg->type);
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
> +	.attach = dw_mipi_dsi_host_attach,
> +	.detach = dw_mipi_dsi_host_detach,
> +	.transfer = dw_mipi_dsi_host_transfer,
> +};
> +
> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	u32 val;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * enabling low power is panel-dependent, we should use the
> +	 * panel configuration here...
> +	 */
> +	val = ENABLE_LOW_POWER;
> +
> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> +		val |= VID_MODE_TYPE_BURST;
> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
> +	else
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
> +
> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
> +}
> +
> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> +				 enum dw_mipi_dsi_mode mode)
> +{
> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	} else {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> +		dw_mipi_dsi_video_mode_config(dsi);
> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	}
> +}
> +
> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
> +}
> +
> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * The maximum permitted escape clock is 20MHz and it is derived from
> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
> +	 *
> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
> +	 * which is:
> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
> +	 */
> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
> +
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
> +	/*
> +	 * todo dw drv improvements
> +	 * timeout clock division should be computed with the
> +	 * high speed transmission counter timeout and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
> +}
> +
> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> +				   struct drm_display_mode *mode)
> +{
> +	u32 val = 0, color = 0;
> +
> +	switch (dsi->format) {
> +	case MIPI_DSI_FMT_RGB888:
> +		color = DPI_COLOR_CODING_24BIT;
> +		break;
> +	case MIPI_DSI_FMT_RGB666:
> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
> +		break;
> +	case MIPI_DSI_FMT_RGB666_PACKED:
> +		color = DPI_COLOR_CODING_18BIT_1;
> +		break;
> +	case MIPI_DSI_FMT_RGB565:
> +		color = DPI_COLOR_CODING_16BIT_1;
> +		break;
> +	}
> +
> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +		val |= VSYNC_ACTIVE_LOW;
> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +		val |= HSYNC_ACTIVE_LOW;
> +
> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
> +	/*
> +	 * todo dw drv improvements
> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
> +	 * should be computed according to byte lane, lane number and only
> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
> +	 */
> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
> +		  | INVACT_LPCMD_TIME(4));
> +}
> +
> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
> +}
> +
> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
> +					    struct drm_display_mode *mode)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * only burst mode is supported here. For non-burst video modes,
> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
> +	 */
> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
> +}
> +
> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * compute high speed transmission counter timeout according
> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
> +	/*
> +	 * todo dw drv improvements
> +	 * the Bus-Turn-Around Timeout Counter should be computed
> +	 * according to byte lane...
> +	 */
> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +}
> +
> +/* Get lane byte clock cycles. */
> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
> +					   struct drm_display_mode *mode,
> +					   u32 hcomponent)
> +{
> +	u32 frac, lbcc;
> +
> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
> +
> +	frac = lbcc % mode->clock;
> +	lbcc = lbcc / mode->clock;
> +	if (frac)
> +		lbcc++;
> +
> +	return lbcc;
> +}
> +
> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
> +					  struct drm_display_mode *mode)
> +{
> +	u32 htotal, hsa, hbp, lbcc;
> +
> +	htotal = mode->htotal;
> +	hsa = mode->hsync_end - mode->hsync_start;
> +	hbp = mode->htotal - mode->hsync_end;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * computations below may be improved...
> +	 */
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
> +}
> +
> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
> +					       struct drm_display_mode *mode)
> +{
> +	u32 vactive, vsa, vfp, vbp;
> +
> +	vactive = mode->vdisplay;
> +	vsa = mode->vsync_end - mode->vsync_start;
> +	vfp = mode->vsync_start - mode->vdisplay;
> +	vbp = mode->vtotal - mode->vsync_end;
> +
> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
> +}
> +
> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * data & clock lane timers should be computed according to panel
> +	 * blankings and to the automatic clock lane control mode...
> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
> +	 */
> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
> +
> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
> +		  | PHY_CLKLP2HS_TIME(0x40));
> +}
> +
> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * stop wait time should be the maximum between host dsi
> +	 * and panel stop wait times
> +	 */
> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
> +		  N_LANES(dsi->lanes));
> +}
> +
> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_read(dsi, DSI_INT_ST0);
> +	dsi_read(dsi, DSI_INT_ST1);
> +	dsi_write(dsi, DSI_INT_MSK0, 0);
> +	dsi_write(dsi, DSI_INT_MSK1, 0);
> +}
> +
> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +
> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	drm_panel_disable(dsi->panel);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	drm_panel_unprepare(dsi->panel);
> +
> +	dw_mipi_dsi_disable(dsi);
> +	pm_runtime_put(dsi->dev);
> +	clk_disable(dsi->pclk);
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +}
> +
> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_encoder *encoder = bridge->encoder;
> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
> +	void *priv_data = dsi->plat_data->priv_data;
> +	int ret;
> +
> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
> +
> +	pm_runtime_get_sync(dsi->dev);
> +	dw_mipi_dsi_init(dsi);
> +	dw_mipi_dsi_dpi_config(dsi, mode);
> +	dw_mipi_dsi_packet_handler_config(dsi);
> +	dw_mipi_dsi_video_mode_config(dsi);
> +	dw_mipi_dsi_video_packet_config(dsi, mode);
> +	dw_mipi_dsi_command_mode_config(dsi);
> +	dw_mipi_dsi_line_timer_config(dsi, mode);
> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
> +	dw_mipi_dsi_dphy_timing_config(dsi);
> +	dw_mipi_dsi_dphy_interface_config(dsi);
> +	dw_mipi_dsi_clear_err(dsi);
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * following command is inside dw_mipi_dsi_phy_init()
> +	 * but this function is also required here. We way move it in the
> +	 * phy but here we are using dsi regs...
> +	 * maybe add the waiting loop here too...
> +	 */
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> +
> +	ret = phy_ops->init(priv_data);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
> +
> +	dw_mipi_dsi_wait_for_two_frames(mode);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	if (drm_panel_prepare(dsi->panel))
> +		dev_err(dsi->dev, "failed to prepare panel\n");
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +	drm_panel_enable(dsi->panel);
> +
> +	clk_disable(dsi->pclk);
> +
> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
> +}
> +
> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +
> +	return drm_panel_get_modes(dsi->panel);
> +}
> +
> +static enum drm_mode_status
> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
> +		       struct drm_display_mode *mode)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
> +	enum drm_mode_status mode_status = MODE_OK;
> +
> +	if (pdata->mode_valid)
> +		mode_status = pdata->mode_valid(pdata->priv_data,
> +						connector, mode);
> +
> +	return mode_status;
> +}
> +
> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
> +	.get_modes = dw_mipi_dsi_connector_get_modes,
> +	.mode_valid = dw_mipi_dsi_mode_valid,
> +};
> +
> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_connector *connector = &dsi->connector;
> +
> +	if (!bridge->encoder) {
> +		DRM_ERROR("Parent encoder object not found\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Set the encoder type as caller does not know it */
> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
> +
> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_helper_add(connector,
> +				 &dw_mipi_dsi_connector_helper_funcs);
> +
> +	drm_connector_init(bridge->dev, connector,
> +			   &dw_mipi_dsi_atomic_connector_funcs,
> +			   DRM_MODE_CONNECTOR_DSI);
> +
> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
> +
> +	return 0;
> +}
> +
> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
> +	.enable = dw_mipi_dsi_bridge_enable,
> +	.disable = dw_mipi_dsi_bridge_disable,
> +	.attach = dw_mipi_dsi_bridge_attach,
> +};
> +
> +static struct dw_mipi_dsi *
> +__dw_mipi_dsi_probe(struct platform_device *pdev,
> +		    const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct reset_control *apb_rst;
> +	struct dw_mipi_dsi *dsi;
> +	struct resource *res;
> +	int ret;
> +
> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return ERR_PTR(-ENOMEM);
> +
> +	dsi->dev = dev;
> +	dsi->plat_data = plat_data;
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +
> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
> +		DRM_ERROR("Phy not properly configured\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	if (!plat_data->base) {
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +		if (!res)
> +			return ERR_PTR(-ENODEV);
> +
> +		dsi->base = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(dsi->base))
> +			return ERR_PTR(-ENODEV);
> +
> +	} else {
> +		dsi->base = plat_data->base;
> +	}
> +
> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> +	if (IS_ERR(dsi->pllref_clk)) {
> +		ret = PTR_ERR(dsi->pllref_clk);
> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	dsi->pclk = devm_clk_get(dev, "pclk");
> +	if (IS_ERR(dsi->pclk)) {
> +		ret = PTR_ERR(dsi->pclk);
> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	/*
> +	 * Note that the reset was not defined in the initial device tree, so
> +	 * we have to be prepared for it not being found.
> +	 */
> +	apb_rst = devm_reset_control_get(dev, "apb");
> +	if (IS_ERR(apb_rst)) {
> +		ret = PTR_ERR(apb_rst);
> +		if (ret == -ENOENT) {
> +			apb_rst = NULL;
> +		} else {
> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
> +			return ERR_PTR(ret);
> +		}
> +	}
> +
> +	if (apb_rst) {
> +		ret = clk_prepare_enable(dsi->pclk);
> +		if (ret) {
> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
> +			return ERR_PTR(ret);
> +		}
> +
> +		reset_control_assert(apb_rst);
> +		usleep_range(10, 20);
> +		reset_control_deassert(apb_rst);
> +
> +		clk_disable(dsi->pclk);
> +	}
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		return ERR_PTR(ret);
> +	}
> +
> +	pm_runtime_enable(dev);
> +
> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> +	dsi->dsi_host.dev = dev;
> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
> +	if (ret) {
> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> +		goto err_cleanup;
> +	}
> +
> +	dsi->bridge.driver_private = dsi;
> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
> +#ifdef CONFIG_OF
> +	dsi->bridge.of_node = pdev->dev.of_node;
> +#endif
> +
> +	clk_enable(dsi->pclk);
> +
> +	dev_set_drvdata(dev, dsi);
> +
> +	return dsi;
> +
> +err_cleanup:
> +	clk_disable_unprepare(dsi->pllref_clk);
> +
> +	return ERR_PTR(ret);
> +}
> +
> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
> +{
> +	pm_runtime_disable(dsi->dev);
> +	clk_disable_unprepare(dsi->pllref_clk);
> +}
> +
> +/*
> + * Probe/remove API, used from platforms based on the DRM bridge API.
> + */
> +int dw_mipi_dsi_probe(struct platform_device *pdev,
> +		      const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_add(&dsi->bridge);
> +	if (ret < 0) {
> +		__dw_mipi_dsi_remove(dsi);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
> +
> +void dw_mipi_dsi_remove(struct platform_device *pdev)
> +{
> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
> +
> +	mipi_dsi_host_unregister(&dsi->dsi_host);
> +	drm_bridge_remove(&dsi->bridge);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
> +
> +/*
> + * Bind/unbind API, used from platforms based on the component framework.
> + */
> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
> +		     const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
> +	if (ret) {
> +		dw_mipi_dsi_remove(pdev);
> +		DRM_ERROR("Failed to initialize bridge with drm\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
> +
> +void dw_mipi_dsi_unbind(struct device *dev)
> +{
> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
> +
> +MODULE_AUTHOR("Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>");
> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:dw-mipi-dsi");
> 
Hi Philippe,

Great, thanks. I did not look in detail, but it seems you forgot to add the dw_mipi_dsi.h file.

Neil
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Neil Armstrong]

On 05/19/2017 05:20 PM, Philippe CORNU wrote:
> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>  drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>  drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>  3 files changed, 1035 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
> index 40d2827..d7fbdff 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>  	help
>  	  Support the I2S Audio interface which is part of the Synopsys
>  	  Designware HDMI block.
> +
> +config DRM_DW_MIPI_DSI
> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
> +	select DRM_KMS_HELPER
> +	select DRM_MIPI_DSI
> +	select DRM_PANEL
> +	help
> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
> +	  controller bridge.
> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
> index 17aa7a6..5f57d36 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
> @@ -3,3 +3,5 @@
>  obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>  obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>  obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
> +
> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> new file mode 100644
> index 0000000..041f564
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -0,0 +1,1024 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Modified by Philippe Cornu <philippe.cornu@st.com>
> + * This generic Synopsys Designware MIPI DSI host driver is based on the
> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <video/mipi_display.h>
> +
> +#define DSI_VERSION			0x00
> +#define DSI_PWR_UP			0x04
> +#define RESET				0
> +#define POWERUP				BIT(0)
> +
> +#define DSI_CLKMGR_CFG			0x08
> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
> +
> +#define DSI_DPI_VCID			0x0c
> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
> +
> +#define DSI_DPI_COLOR_CODING		0x10
> +#define EN18_LOOSELY			BIT(8)
> +#define DPI_COLOR_CODING_16BIT_1	0x0
> +#define DPI_COLOR_CODING_16BIT_2	0x1
> +#define DPI_COLOR_CODING_16BIT_3	0x2
> +#define DPI_COLOR_CODING_18BIT_1	0x3
> +#define DPI_COLOR_CODING_18BIT_2	0x4
> +#define DPI_COLOR_CODING_24BIT		0x5
> +
> +#define DSI_DPI_CFG_POL			0x14
> +#define COLORM_ACTIVE_LOW		BIT(4)
> +#define SHUTD_ACTIVE_LOW		BIT(3)
> +#define HSYNC_ACTIVE_LOW		BIT(2)
> +#define VSYNC_ACTIVE_LOW		BIT(1)
> +#define DATAEN_ACTIVE_LOW		BIT(0)
> +
> +#define DSI_DPI_LP_CMD_TIM		0x18
> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
> +
> +#define DSI_DBI_CFG			0x20
> +#define DSI_DBI_CMDSIZE			0x28
> +
> +#define DSI_PCKHDL_CFG			0x2c
> +#define EN_CRC_RX			BIT(4)
> +#define EN_ECC_RX			BIT(3)
> +#define EN_BTA				BIT(2)
> +#define EN_EOTP_RX			BIT(1)
> +#define EN_EOTP_TX			BIT(0)
> +
> +#define DSI_MODE_CFG			0x34
> +#define ENABLE_VIDEO_MODE		0
> +#define ENABLE_CMD_MODE			BIT(0)
> +
> +#define DSI_VID_MODE_CFG		0x38
> +#define FRAME_BTA_ACK			BIT(14)
> +#define ENABLE_LOW_POWER		(0x3f << 8)
> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
> +#define VID_MODE_TYPE_BURST			0x2
> +#define VID_MODE_TYPE_MASK			0x3
> +
> +#define DSI_VID_PKT_SIZE		0x3c
> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
> +#define VID_PKT_MAX_SIZE		0x3fff
> +
> +#define DSI_VID_HSA_TIME		0x48
> +#define DSI_VID_HBP_TIME		0x4c
> +#define DSI_VID_HLINE_TIME		0x50
> +#define DSI_VID_VSA_LINES		0x54
> +#define DSI_VID_VBP_LINES		0x58
> +#define DSI_VID_VFP_LINES		0x5c
> +#define DSI_VID_VACTIVE_LINES		0x60
> +#define DSI_CMD_MODE_CFG		0x68
> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
> +#define DCS_LW_TX_LP			BIT(19)
> +#define DCS_SR_0P_TX_LP			BIT(18)
> +#define DCS_SW_1P_TX_LP			BIT(17)
> +#define DCS_SW_0P_TX_LP			BIT(16)
> +#define GEN_LW_TX_LP			BIT(14)
> +#define GEN_SR_2P_TX_LP			BIT(13)
> +#define GEN_SR_1P_TX_LP			BIT(12)
> +#define GEN_SR_0P_TX_LP			BIT(11)
> +#define GEN_SW_2P_TX_LP			BIT(10)
> +#define GEN_SW_1P_TX_LP			BIT(9)
> +#define GEN_SW_0P_TX_LP			BIT(8)
> +#define EN_ACK_RQST			BIT(1)
> +#define EN_TEAR_FX			BIT(0)
> +
> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
> +					 DCS_LW_TX_LP | \
> +					 DCS_SR_0P_TX_LP | \
> +					 DCS_SW_1P_TX_LP | \
> +					 DCS_SW_0P_TX_LP | \
> +					 GEN_LW_TX_LP | \
> +					 GEN_SR_2P_TX_LP | \
> +					 GEN_SR_1P_TX_LP | \
> +					 GEN_SR_0P_TX_LP | \
> +					 GEN_SW_2P_TX_LP | \
> +					 GEN_SW_1P_TX_LP | \
> +					 GEN_SW_0P_TX_LP)
> +
> +#define DSI_GEN_HDR			0x6c
> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
> +#define GEN_HDATA_MASK			(0xffff << 8)
> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
> +#define GEN_HTYPE_MASK			0xff
> +
> +#define DSI_GEN_PLD_DATA		0x70
> +
> +#define DSI_CMD_PKT_STATUS		0x74
> +#define GEN_CMD_EMPTY			BIT(0)
> +#define GEN_CMD_FULL			BIT(1)
> +#define GEN_PLD_W_EMPTY			BIT(2)
> +#define GEN_PLD_W_FULL			BIT(3)
> +#define GEN_PLD_R_EMPTY			BIT(4)
> +#define GEN_PLD_R_FULL			BIT(5)
> +#define GEN_RD_CMD_BUSY			BIT(6)
> +
> +#define DSI_TO_CNT_CFG			0x78
> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
> +
> +#define DSI_BTA_TO_CNT			0x8c
> +#define DSI_LPCLK_CTRL			0x94
> +#define AUTO_CLKLANE_CTRL		BIT(1)
> +#define PHY_TXREQUESTCLKHS		BIT(0)
> +
> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
> +
> +#define DSI_PHY_TMR_CFG			0x9c
> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
> +
> +#define DSI_PHY_RSTZ			0xa0
> +#define PHY_DISFORCEPLL			0
> +#define PHY_ENFORCEPLL			BIT(3)
> +#define PHY_DISABLECLK			0
> +#define PHY_ENABLECLK			BIT(2)
> +#define PHY_RSTZ			0
> +#define PHY_UNRSTZ			BIT(1)
> +#define PHY_SHUTDOWNZ			0
> +#define PHY_UNSHUTDOWNZ			BIT(0)
> +
> +#define DSI_PHY_IF_CFG			0xa4
> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
> +
> +#define DSI_PHY_STATUS			0xb0
> +#define LOCK				BIT(0)
> +#define STOP_STATE_CLK_LANE		BIT(2)
> +
> +#define DSI_PHY_TST_CTRL0		0xb4
> +#define PHY_TESTCLK			BIT(1)
> +#define PHY_UNTESTCLK			0
> +#define PHY_TESTCLR			BIT(0)
> +#define PHY_UNTESTCLR			0
> +
> +#define DSI_PHY_TST_CTRL1		0xb8
> +#define PHY_TESTEN			BIT(16)
> +#define PHY_UNTESTEN			0
> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
> +
> +#define DSI_INT_ST0			0xbc
> +#define DSI_INT_ST1			0xc0
> +#define DSI_INT_MSK0			0xc4
> +#define DSI_INT_MSK1			0xc8
> +
> +#define PHY_STATUS_TIMEOUT_US		10000
> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
> +
> +struct dw_mipi_dsi {
> +	struct drm_bridge bridge;
> +	struct drm_connector connector;
> +	struct mipi_dsi_host dsi_host;
> +	struct drm_panel *panel;
> +	struct device *dev;
> +	void __iomem *base;
> +
> +	struct clk *pllref_clk;
> +	struct clk *pclk;
> +
> +	int dpms_mode;
> +	unsigned int lane_mbps; /* per lane */
> +	u32 channel;
> +	u32 lanes;
> +	u32 format;
> +	unsigned long mode_flags;
> +
> +	const struct dw_mipi_dsi_plat_data *plat_data;
> +};
> +
> +enum dw_mipi_dsi_mode {
> +	DW_MIPI_DSI_CMD_MODE,
> +	DW_MIPI_DSI_VID_MODE,
> +};
> +
> +/*
> + * The controller should generate 2 frames before
> + * preparing the peripheral.
> + */
> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
> +{
> +	int refresh, two_frames;
> +
> +	refresh = drm_mode_vrefresh(mode);
> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> +	msleep(two_frames);
> +}
> +
> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
> +{
> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
> +}
> +
> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
> +{
> +	return container_of(con, struct dw_mipi_dsi, connector);
> +}
> +
> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
> +}
> +
> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> +{
> +	return readl_relaxed(dsi->base + reg);
> +}
> +
> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
> +			device->lanes);
> +		return -EINVAL;
> +	}
> +
> +	dsi->lanes = device->lanes;
> +	dsi->channel = device->channel;
> +	dsi->format = device->format;
> +	dsi->mode_flags = device->mode_flags;
> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
> +	if (dsi->panel)
> +		return drm_panel_attach(dsi->panel, &dsi->connector);
> +
> +	return -EINVAL;
> +}
> +
> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	drm_panel_detach(dsi->panel);
> +
> +	return 0;
> +}
> +
> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> +				   const struct mipi_dsi_msg *msg)
> +{
> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> +	u32 val = 0;
> +
> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> +		val |= EN_ACK_RQST;
> +	if (lpm)
> +		val |= CMD_MODE_ALL_LP;
> +
> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> +
> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +
> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> +}
> +
> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
> +{
> +	int ret;
> +	u32 val, mask;
> +
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, !(val & GEN_CMD_FULL), 1000,
> +				 CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
> +		return ret;
> +	}
> +
> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
> +
> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, (val & mask) == mask,
> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to write command FIFO\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> +				       const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	u16 data = 0;
> +	u32 val;
> +
> +	if (msg->tx_len > 0)
> +		data |= tx_buf[0];
> +	if (msg->tx_len > 1)
> +		data |= tx_buf[1] << 8;
> +
> +	if (msg->tx_len > 2) {
> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> +}
> +
> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> +				      const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> +	u32 remainder;
> +	u32 val;
> +
> +	if (msg->tx_len < 3) {
> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
> +		if (len < pld_data_bytes) {
> +			remainder = 0;
> +			memcpy(&remainder, tx_buf, len);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			len = 0;
> +		} else {
> +			memcpy(&remainder, tx_buf, pld_data_bytes);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			tx_buf += pld_data_bytes;
> +			len -= pld_data_bytes;
> +		}
> +
> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +					 val, !(val & GEN_PLD_W_FULL), 1000,
> +					 CMD_PKT_STATUS_TIMEOUT_US);
> +		if (ret < 0) {
> +			dev_err(dsi->dev,
> +				"failed to get available write payload FIFO\n");
> +			return ret;
> +		}
> +	}
> +
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
> +}
> +
> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
> +					 const struct mipi_dsi_msg *msg)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +	int ret;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * use mipi_dsi_create_packet() instead of all following
> +	 * functions and code (no switch cases, no
> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
> +	 * and use packet.header...
> +	 */
> +	dw_mipi_message_config(dsi, msg);
> +
> +	switch (msg->type) {
> +	case MIPI_DSI_DCS_SHORT_WRITE:
> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
> +		break;
> +	case MIPI_DSI_DCS_LONG_WRITE:
> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
> +		break;
> +	default:
> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
> +			msg->type);
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
> +	.attach = dw_mipi_dsi_host_attach,
> +	.detach = dw_mipi_dsi_host_detach,
> +	.transfer = dw_mipi_dsi_host_transfer,
> +};
> +
> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	u32 val;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * enabling low power is panel-dependent, we should use the
> +	 * panel configuration here...
> +	 */
> +	val = ENABLE_LOW_POWER;
> +
> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> +		val |= VID_MODE_TYPE_BURST;
> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
> +	else
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
> +
> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
> +}
> +
> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> +				 enum dw_mipi_dsi_mode mode)
> +{
> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	} else {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> +		dw_mipi_dsi_video_mode_config(dsi);
> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	}
> +}
> +
> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
> +}
> +
> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * The maximum permitted escape clock is 20MHz and it is derived from
> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
> +	 *
> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
> +	 * which is:
> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
> +	 */
> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
> +
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
> +	/*
> +	 * todo dw drv improvements
> +	 * timeout clock division should be computed with the
> +	 * high speed transmission counter timeout and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
> +}
> +
> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> +				   struct drm_display_mode *mode)
> +{
> +	u32 val = 0, color = 0;
> +
> +	switch (dsi->format) {
> +	case MIPI_DSI_FMT_RGB888:
> +		color = DPI_COLOR_CODING_24BIT;
> +		break;
> +	case MIPI_DSI_FMT_RGB666:
> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
> +		break;
> +	case MIPI_DSI_FMT_RGB666_PACKED:
> +		color = DPI_COLOR_CODING_18BIT_1;
> +		break;
> +	case MIPI_DSI_FMT_RGB565:
> +		color = DPI_COLOR_CODING_16BIT_1;
> +		break;
> +	}
> +
> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +		val |= VSYNC_ACTIVE_LOW;
> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +		val |= HSYNC_ACTIVE_LOW;
> +
> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
> +	/*
> +	 * todo dw drv improvements
> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
> +	 * should be computed according to byte lane, lane number and only
> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
> +	 */
> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
> +		  | INVACT_LPCMD_TIME(4));
> +}
> +
> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
> +}
> +
> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
> +					    struct drm_display_mode *mode)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * only burst mode is supported here. For non-burst video modes,
> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
> +	 */
> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
> +}
> +
> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * compute high speed transmission counter timeout according
> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
> +	/*
> +	 * todo dw drv improvements
> +	 * the Bus-Turn-Around Timeout Counter should be computed
> +	 * according to byte lane...
> +	 */
> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +}
> +
> +/* Get lane byte clock cycles. */
> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
> +					   struct drm_display_mode *mode,
> +					   u32 hcomponent)
> +{
> +	u32 frac, lbcc;
> +
> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
> +
> +	frac = lbcc % mode->clock;
> +	lbcc = lbcc / mode->clock;
> +	if (frac)
> +		lbcc++;
> +
> +	return lbcc;
> +}
> +
> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
> +					  struct drm_display_mode *mode)
> +{
> +	u32 htotal, hsa, hbp, lbcc;
> +
> +	htotal = mode->htotal;
> +	hsa = mode->hsync_end - mode->hsync_start;
> +	hbp = mode->htotal - mode->hsync_end;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * computations below may be improved...
> +	 */
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
> +}
> +
> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
> +					       struct drm_display_mode *mode)
> +{
> +	u32 vactive, vsa, vfp, vbp;
> +
> +	vactive = mode->vdisplay;
> +	vsa = mode->vsync_end - mode->vsync_start;
> +	vfp = mode->vsync_start - mode->vdisplay;
> +	vbp = mode->vtotal - mode->vsync_end;
> +
> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
> +}
> +
> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * data & clock lane timers should be computed according to panel
> +	 * blankings and to the automatic clock lane control mode...
> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
> +	 */
> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
> +
> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
> +		  | PHY_CLKLP2HS_TIME(0x40));
> +}
> +
> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * stop wait time should be the maximum between host dsi
> +	 * and panel stop wait times
> +	 */
> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
> +		  N_LANES(dsi->lanes));
> +}
> +
> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_read(dsi, DSI_INT_ST0);
> +	dsi_read(dsi, DSI_INT_ST1);
> +	dsi_write(dsi, DSI_INT_MSK0, 0);
> +	dsi_write(dsi, DSI_INT_MSK1, 0);
> +}
> +
> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +
> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	drm_panel_disable(dsi->panel);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	drm_panel_unprepare(dsi->panel);
> +
> +	dw_mipi_dsi_disable(dsi);
> +	pm_runtime_put(dsi->dev);
> +	clk_disable(dsi->pclk);
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +}
> +
> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_encoder *encoder = bridge->encoder;
> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
> +	void *priv_data = dsi->plat_data->priv_data;
> +	int ret;
> +
> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
> +
> +	pm_runtime_get_sync(dsi->dev);
> +	dw_mipi_dsi_init(dsi);
> +	dw_mipi_dsi_dpi_config(dsi, mode);
> +	dw_mipi_dsi_packet_handler_config(dsi);
> +	dw_mipi_dsi_video_mode_config(dsi);
> +	dw_mipi_dsi_video_packet_config(dsi, mode);
> +	dw_mipi_dsi_command_mode_config(dsi);
> +	dw_mipi_dsi_line_timer_config(dsi, mode);
> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
> +	dw_mipi_dsi_dphy_timing_config(dsi);
> +	dw_mipi_dsi_dphy_interface_config(dsi);
> +	dw_mipi_dsi_clear_err(dsi);
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * following command is inside dw_mipi_dsi_phy_init()
> +	 * but this function is also required here. We way move it in the
> +	 * phy but here we are using dsi regs...
> +	 * maybe add the waiting loop here too...
> +	 */
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> +
> +	ret = phy_ops->init(priv_data);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
> +
> +	dw_mipi_dsi_wait_for_two_frames(mode);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	if (drm_panel_prepare(dsi->panel))
> +		dev_err(dsi->dev, "failed to prepare panel\n");
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +	drm_panel_enable(dsi->panel);
> +
> +	clk_disable(dsi->pclk);
> +
> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
> +}
> +
> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +
> +	return drm_panel_get_modes(dsi->panel);
> +}
> +
> +static enum drm_mode_status
> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
> +		       struct drm_display_mode *mode)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
> +	enum drm_mode_status mode_status = MODE_OK;
> +
> +	if (pdata->mode_valid)
> +		mode_status = pdata->mode_valid(pdata->priv_data,
> +						connector, mode);
> +
> +	return mode_status;
> +}
> +
> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
> +	.get_modes = dw_mipi_dsi_connector_get_modes,
> +	.mode_valid = dw_mipi_dsi_mode_valid,
> +};
> +
> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_connector *connector = &dsi->connector;
> +
> +	if (!bridge->encoder) {
> +		DRM_ERROR("Parent encoder object not found\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Set the encoder type as caller does not know it */
> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
> +
> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_helper_add(connector,
> +				 &dw_mipi_dsi_connector_helper_funcs);
> +
> +	drm_connector_init(bridge->dev, connector,
> +			   &dw_mipi_dsi_atomic_connector_funcs,
> +			   DRM_MODE_CONNECTOR_DSI);
> +
> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
> +
> +	return 0;
> +}
> +
> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
> +	.enable = dw_mipi_dsi_bridge_enable,
> +	.disable = dw_mipi_dsi_bridge_disable,
> +	.attach = dw_mipi_dsi_bridge_attach,
> +};
> +
> +static struct dw_mipi_dsi *
> +__dw_mipi_dsi_probe(struct platform_device *pdev,
> +		    const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct reset_control *apb_rst;
> +	struct dw_mipi_dsi *dsi;
> +	struct resource *res;
> +	int ret;
> +
> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return ERR_PTR(-ENOMEM);
> +
> +	dsi->dev = dev;
> +	dsi->plat_data = plat_data;
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +
> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
> +		DRM_ERROR("Phy not properly configured\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	if (!plat_data->base) {
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +		if (!res)
> +			return ERR_PTR(-ENODEV);
> +
> +		dsi->base = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(dsi->base))
> +			return ERR_PTR(-ENODEV);
> +
> +	} else {
> +		dsi->base = plat_data->base;
> +	}
> +
> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> +	if (IS_ERR(dsi->pllref_clk)) {
> +		ret = PTR_ERR(dsi->pllref_clk);
> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	dsi->pclk = devm_clk_get(dev, "pclk");
> +	if (IS_ERR(dsi->pclk)) {
> +		ret = PTR_ERR(dsi->pclk);
> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	/*
> +	 * Note that the reset was not defined in the initial device tree, so
> +	 * we have to be prepared for it not being found.
> +	 */
> +	apb_rst = devm_reset_control_get(dev, "apb");
> +	if (IS_ERR(apb_rst)) {
> +		ret = PTR_ERR(apb_rst);
> +		if (ret == -ENOENT) {
> +			apb_rst = NULL;
> +		} else {
> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
> +			return ERR_PTR(ret);
> +		}
> +	}
> +
> +	if (apb_rst) {
> +		ret = clk_prepare_enable(dsi->pclk);
> +		if (ret) {
> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
> +			return ERR_PTR(ret);
> +		}
> +
> +		reset_control_assert(apb_rst);
> +		usleep_range(10, 20);
> +		reset_control_deassert(apb_rst);
> +
> +		clk_disable(dsi->pclk);
> +	}
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		return ERR_PTR(ret);
> +	}
> +
> +	pm_runtime_enable(dev);
> +
> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> +	dsi->dsi_host.dev = dev;
> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
> +	if (ret) {
> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> +		goto err_cleanup;
> +	}
> +
> +	dsi->bridge.driver_private = dsi;
> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
> +#ifdef CONFIG_OF
> +	dsi->bridge.of_node = pdev->dev.of_node;
> +#endif
> +
> +	clk_enable(dsi->pclk);
> +
> +	dev_set_drvdata(dev, dsi);
> +
> +	return dsi;
> +
> +err_cleanup:
> +	clk_disable_unprepare(dsi->pllref_clk);
> +
> +	return ERR_PTR(ret);
> +}
> +
> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
> +{
> +	pm_runtime_disable(dsi->dev);
> +	clk_disable_unprepare(dsi->pllref_clk);
> +}
> +
> +/*
> + * Probe/remove API, used from platforms based on the DRM bridge API.
> + */
> +int dw_mipi_dsi_probe(struct platform_device *pdev,
> +		      const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_add(&dsi->bridge);
> +	if (ret < 0) {
> +		__dw_mipi_dsi_remove(dsi);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
> +
> +void dw_mipi_dsi_remove(struct platform_device *pdev)
> +{
> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
> +
> +	mipi_dsi_host_unregister(&dsi->dsi_host);
> +	drm_bridge_remove(&dsi->bridge);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
> +
> +/*
> + * Bind/unbind API, used from platforms based on the component framework.
> + */
> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
> +		     const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
> +	if (ret) {
> +		dw_mipi_dsi_remove(pdev);
> +		DRM_ERROR("Failed to initialize bridge with drm\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
> +
> +void dw_mipi_dsi_unbind(struct device *dev)
> +{
> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
> +
> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:dw-mipi-dsi");
> 
Hi Philippe,

Great, thanks. I did not look in detail, but it seems you forgot to add the dw_mipi_dsi.h file.

Neil

Re: [PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Philippe CORNU]

On 05/19/2017 05:33 PM, Neil Armstrong wrote:
> On 05/19/2017 05:20 PM, Philippe CORNU wrote:
>> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
>> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>>
>> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
>> ---
>>   drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>>   drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>>   drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>>   3 files changed, 1035 insertions(+)
>>   create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> index 40d2827..d7fbdff 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>>   	help
>>   	  Support the I2S Audio interface which is part of the Synopsys
>>   	  Designware HDMI block.
>> +
>> +config DRM_DW_MIPI_DSI
>> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
>> +	select DRM_KMS_HELPER
>> +	select DRM_MIPI_DSI
>> +	select DRM_PANEL
>> +	help
>> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
>> +	  controller bridge.
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
>> index 17aa7a6..5f57d36 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
>> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
>> @@ -3,3 +3,5 @@
>>   obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>>   obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>>   obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
>> +
>> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> new file mode 100644
>> index 0000000..041f564
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> @@ -0,0 +1,1024 @@
>> +/*
>> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * Modified by Philippe Cornu <philippe.cornu@st.com>
>> + * This generic Synopsys Designware MIPI DSI host driver is based on the
>> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/bridge/dw_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define DSI_VERSION			0x00
>> +#define DSI_PWR_UP			0x04
>> +#define RESET				0
>> +#define POWERUP				BIT(0)
>> +
>> +#define DSI_CLKMGR_CFG			0x08
>> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
>> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
>> +
>> +#define DSI_DPI_VCID			0x0c
>> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
>> +
>> +#define DSI_DPI_COLOR_CODING		0x10
>> +#define EN18_LOOSELY			BIT(8)
>> +#define DPI_COLOR_CODING_16BIT_1	0x0
>> +#define DPI_COLOR_CODING_16BIT_2	0x1
>> +#define DPI_COLOR_CODING_16BIT_3	0x2
>> +#define DPI_COLOR_CODING_18BIT_1	0x3
>> +#define DPI_COLOR_CODING_18BIT_2	0x4
>> +#define DPI_COLOR_CODING_24BIT		0x5
>> +
>> +#define DSI_DPI_CFG_POL			0x14
>> +#define COLORM_ACTIVE_LOW		BIT(4)
>> +#define SHUTD_ACTIVE_LOW		BIT(3)
>> +#define HSYNC_ACTIVE_LOW		BIT(2)
>> +#define VSYNC_ACTIVE_LOW		BIT(1)
>> +#define DATAEN_ACTIVE_LOW		BIT(0)
>> +
>> +#define DSI_DPI_LP_CMD_TIM		0x18
>> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
>> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
>> +
>> +#define DSI_DBI_CFG			0x20
>> +#define DSI_DBI_CMDSIZE			0x28
>> +
>> +#define DSI_PCKHDL_CFG			0x2c
>> +#define EN_CRC_RX			BIT(4)
>> +#define EN_ECC_RX			BIT(3)
>> +#define EN_BTA				BIT(2)
>> +#define EN_EOTP_RX			BIT(1)
>> +#define EN_EOTP_TX			BIT(0)
>> +
>> +#define DSI_MODE_CFG			0x34
>> +#define ENABLE_VIDEO_MODE		0
>> +#define ENABLE_CMD_MODE			BIT(0)
>> +
>> +#define DSI_VID_MODE_CFG		0x38
>> +#define FRAME_BTA_ACK			BIT(14)
>> +#define ENABLE_LOW_POWER		(0x3f << 8)
>> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
>> +#define VID_MODE_TYPE_BURST			0x2
>> +#define VID_MODE_TYPE_MASK			0x3
>> +
>> +#define DSI_VID_PKT_SIZE		0x3c
>> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
>> +#define VID_PKT_MAX_SIZE		0x3fff
>> +
>> +#define DSI_VID_HSA_TIME		0x48
>> +#define DSI_VID_HBP_TIME		0x4c
>> +#define DSI_VID_HLINE_TIME		0x50
>> +#define DSI_VID_VSA_LINES		0x54
>> +#define DSI_VID_VBP_LINES		0x58
>> +#define DSI_VID_VFP_LINES		0x5c
>> +#define DSI_VID_VACTIVE_LINES		0x60
>> +#define DSI_CMD_MODE_CFG		0x68
>> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
>> +#define DCS_LW_TX_LP			BIT(19)
>> +#define DCS_SR_0P_TX_LP			BIT(18)
>> +#define DCS_SW_1P_TX_LP			BIT(17)
>> +#define DCS_SW_0P_TX_LP			BIT(16)
>> +#define GEN_LW_TX_LP			BIT(14)
>> +#define GEN_SR_2P_TX_LP			BIT(13)
>> +#define GEN_SR_1P_TX_LP			BIT(12)
>> +#define GEN_SR_0P_TX_LP			BIT(11)
>> +#define GEN_SW_2P_TX_LP			BIT(10)
>> +#define GEN_SW_1P_TX_LP			BIT(9)
>> +#define GEN_SW_0P_TX_LP			BIT(8)
>> +#define EN_ACK_RQST			BIT(1)
>> +#define EN_TEAR_FX			BIT(0)
>> +
>> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
>> +					 DCS_LW_TX_LP | \
>> +					 DCS_SR_0P_TX_LP | \
>> +					 DCS_SW_1P_TX_LP | \
>> +					 DCS_SW_0P_TX_LP | \
>> +					 GEN_LW_TX_LP | \
>> +					 GEN_SR_2P_TX_LP | \
>> +					 GEN_SR_1P_TX_LP | \
>> +					 GEN_SR_0P_TX_LP | \
>> +					 GEN_SW_2P_TX_LP | \
>> +					 GEN_SW_1P_TX_LP | \
>> +					 GEN_SW_0P_TX_LP)
>> +
>> +#define DSI_GEN_HDR			0x6c
>> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
>> +#define GEN_HDATA_MASK			(0xffff << 8)
>> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
>> +#define GEN_HTYPE_MASK			0xff
>> +
>> +#define DSI_GEN_PLD_DATA		0x70
>> +
>> +#define DSI_CMD_PKT_STATUS		0x74
>> +#define GEN_CMD_EMPTY			BIT(0)
>> +#define GEN_CMD_FULL			BIT(1)
>> +#define GEN_PLD_W_EMPTY			BIT(2)
>> +#define GEN_PLD_W_FULL			BIT(3)
>> +#define GEN_PLD_R_EMPTY			BIT(4)
>> +#define GEN_PLD_R_FULL			BIT(5)
>> +#define GEN_RD_CMD_BUSY			BIT(6)
>> +
>> +#define DSI_TO_CNT_CFG			0x78
>> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
>> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
>> +
>> +#define DSI_BTA_TO_CNT			0x8c
>> +#define DSI_LPCLK_CTRL			0x94
>> +#define AUTO_CLKLANE_CTRL		BIT(1)
>> +#define PHY_TXREQUESTCLKHS		BIT(0)
>> +
>> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
>> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
>> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
>> +
>> +#define DSI_PHY_TMR_CFG			0x9c
>> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
>> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
>> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
>> +
>> +#define DSI_PHY_RSTZ			0xa0
>> +#define PHY_DISFORCEPLL			0
>> +#define PHY_ENFORCEPLL			BIT(3)
>> +#define PHY_DISABLECLK			0
>> +#define PHY_ENABLECLK			BIT(2)
>> +#define PHY_RSTZ			0
>> +#define PHY_UNRSTZ			BIT(1)
>> +#define PHY_SHUTDOWNZ			0
>> +#define PHY_UNSHUTDOWNZ			BIT(0)
>> +
>> +#define DSI_PHY_IF_CFG			0xa4
>> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
>> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
>> +
>> +#define DSI_PHY_STATUS			0xb0
>> +#define LOCK				BIT(0)
>> +#define STOP_STATE_CLK_LANE		BIT(2)
>> +
>> +#define DSI_PHY_TST_CTRL0		0xb4
>> +#define PHY_TESTCLK			BIT(1)
>> +#define PHY_UNTESTCLK			0
>> +#define PHY_TESTCLR			BIT(0)
>> +#define PHY_UNTESTCLR			0
>> +
>> +#define DSI_PHY_TST_CTRL1		0xb8
>> +#define PHY_TESTEN			BIT(16)
>> +#define PHY_UNTESTEN			0
>> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
>> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
>> +
>> +#define DSI_INT_ST0			0xbc
>> +#define DSI_INT_ST1			0xc0
>> +#define DSI_INT_MSK0			0xc4
>> +#define DSI_INT_MSK1			0xc8
>> +
>> +#define PHY_STATUS_TIMEOUT_US		10000
>> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
>> +
>> +struct dw_mipi_dsi {
>> +	struct drm_bridge bridge;
>> +	struct drm_connector connector;
>> +	struct mipi_dsi_host dsi_host;
>> +	struct drm_panel *panel;
>> +	struct device *dev;
>> +	void __iomem *base;
>> +
>> +	struct clk *pllref_clk;
>> +	struct clk *pclk;
>> +
>> +	int dpms_mode;
>> +	unsigned int lane_mbps; /* per lane */
>> +	u32 channel;
>> +	u32 lanes;
>> +	u32 format;
>> +	unsigned long mode_flags;
>> +
>> +	const struct dw_mipi_dsi_plat_data *plat_data;
>> +};
>> +
>> +enum dw_mipi_dsi_mode {
>> +	DW_MIPI_DSI_CMD_MODE,
>> +	DW_MIPI_DSI_VID_MODE,
>> +};
>> +
>> +/*
>> + * The controller should generate 2 frames before
>> + * preparing the peripheral.
>> + */
>> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
>> +{
>> +	int refresh, two_frames;
>> +
>> +	refresh = drm_mode_vrefresh(mode);
>> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
>> +	msleep(two_frames);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
>> +{
>> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
>> +{
>> +	return container_of(con, struct dw_mipi_dsi, connector);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
>> +{
>> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
>> +}
>> +
>> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
>> +{
>> +	writel_relaxed(val, dsi->base + reg);
>> +}
>> +
>> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
>> +{
>> +	return readl_relaxed(dsi->base + reg);
>> +}
>> +
>> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
>> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
>> +			device->lanes);
>> +		return -EINVAL;
>> +	}
>> +
>> +	dsi->lanes = device->lanes;
>> +	dsi->channel = device->channel;
>> +	dsi->format = device->format;
>> +	dsi->mode_flags = device->mode_flags;
>> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
>> +	if (dsi->panel)
>> +		return drm_panel_attach(dsi->panel, &dsi->connector);
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	drm_panel_detach(dsi->panel);
>> +
>> +	return 0;
>> +}
>> +
>> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>> +				   const struct mipi_dsi_msg *msg)
>> +{
>> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
>> +	u32 val = 0;
>> +
>> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
>> +		val |= EN_ACK_RQST;
>> +	if (lpm)
>> +		val |= CMD_MODE_ALL_LP;
>> +
>> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
>> +
>> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
>> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +
>> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
>> +}
>> +
>> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
>> +{
>> +	int ret;
>> +	u32 val, mask;
>> +
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, !(val & GEN_CMD_FULL), 1000,
>> +				 CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
>> +
>> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, (val & mask) == mask,
>> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to write command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
>> +				       const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	u16 data = 0;
>> +	u32 val;
>> +
>> +	if (msg->tx_len > 0)
>> +		data |= tx_buf[0];
>> +	if (msg->tx_len > 1)
>> +		data |= tx_buf[1] << 8;
>> +
>> +	if (msg->tx_len > 2) {
>> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
>> +				      const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
>> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
>> +	u32 remainder;
>> +	u32 val;
>> +
>> +	if (msg->tx_len < 3) {
>> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
>> +		if (len < pld_data_bytes) {
>> +			remainder = 0;
>> +			memcpy(&remainder, tx_buf, len);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			len = 0;
>> +		} else {
>> +			memcpy(&remainder, tx_buf, pld_data_bytes);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			tx_buf += pld_data_bytes;
>> +			len -= pld_data_bytes;
>> +		}
>> +
>> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +					 val, !(val & GEN_PLD_W_FULL), 1000,
>> +					 CMD_PKT_STATUS_TIMEOUT_US);
>> +		if (ret < 0) {
>> +			dev_err(dsi->dev,
>> +				"failed to get available write payload FIFO\n");
>> +			return ret;
>> +		}
>> +	}
>> +
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
>> +}
>> +
>> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
>> +					 const struct mipi_dsi_msg *msg)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +	int ret;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * use mipi_dsi_create_packet() instead of all following
>> +	 * functions and code (no switch cases, no
>> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
>> +	 * and use packet.header...
>> +	 */
>> +	dw_mipi_message_config(dsi, msg);
>> +
>> +	switch (msg->type) {
>> +	case MIPI_DSI_DCS_SHORT_WRITE:
>> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
>> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
>> +		break;
>> +	case MIPI_DSI_DCS_LONG_WRITE:
>> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
>> +		break;
>> +	default:
>> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
>> +			msg->type);
>> +		ret = -EINVAL;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
>> +	.attach = dw_mipi_dsi_host_attach,
>> +	.detach = dw_mipi_dsi_host_detach,
>> +	.transfer = dw_mipi_dsi_host_transfer,
>> +};
>> +
>> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	u32 val;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * enabling low power is panel-dependent, we should use the
>> +	 * panel configuration here...
>> +	 */
>> +	val = ENABLE_LOW_POWER;
>> +
>> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
>> +		val |= VID_MODE_TYPE_BURST;
>> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
>> +	else
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>> +
>> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> +}
>> +
>> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
>> +				 enum dw_mipi_dsi_mode mode)
>> +{
>> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	} else {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
>> +		dw_mipi_dsi_video_mode_config(dsi);
>> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	}
>> +}
>> +
>> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
>> +}
>> +
>> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * The maximum permitted escape clock is 20MHz and it is derived from
>> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
>> +	 *
>> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
>> +	 * which is:
>> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
>> +	 */
>> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
>> +
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
>> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * timeout clock division should be computed with the
>> +	 * high speed transmission counter timeout and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
>> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
>> +}
>> +
>> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
>> +				   struct drm_display_mode *mode)
>> +{
>> +	u32 val = 0, color = 0;
>> +
>> +	switch (dsi->format) {
>> +	case MIPI_DSI_FMT_RGB888:
>> +		color = DPI_COLOR_CODING_24BIT;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666:
>> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666_PACKED:
>> +		color = DPI_COLOR_CODING_18BIT_1;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB565:
>> +		color = DPI_COLOR_CODING_16BIT_1;
>> +		break;
>> +	}
>> +
>> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> +		val |= VSYNC_ACTIVE_LOW;
>> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> +		val |= HSYNC_ACTIVE_LOW;
>> +
>> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
>> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
>> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
>> +	 * should be computed according to byte lane, lane number and only
>> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
>> +	 */
>> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
>> +		  | INVACT_LPCMD_TIME(4));
>> +}
>> +
>> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
>> +}
>> +
>> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
>> +					    struct drm_display_mode *mode)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * only burst mode is supported here. For non-burst video modes,
>> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
>> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
>> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
>> +	 */
>> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
>> +}
>> +
>> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * compute high speed transmission counter timeout according
>> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * the Bus-Turn-Around Timeout Counter should be computed
>> +	 * according to byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
>> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +}
>> +
>> +/* Get lane byte clock cycles. */
>> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
>> +					   struct drm_display_mode *mode,
>> +					   u32 hcomponent)
>> +{
>> +	u32 frac, lbcc;
>> +
>> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
>> +
>> +	frac = lbcc % mode->clock;
>> +	lbcc = lbcc / mode->clock;
>> +	if (frac)
>> +		lbcc++;
>> +
>> +	return lbcc;
>> +}
>> +
>> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
>> +					  struct drm_display_mode *mode)
>> +{
>> +	u32 htotal, hsa, hbp, lbcc;
>> +
>> +	htotal = mode->htotal;
>> +	hsa = mode->hsync_end - mode->hsync_start;
>> +	hbp = mode->htotal - mode->hsync_end;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * computations below may be improved...
>> +	 */
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
>> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
>> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
>> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
>> +}
>> +
>> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
>> +					       struct drm_display_mode *mode)
>> +{
>> +	u32 vactive, vsa, vfp, vbp;
>> +
>> +	vactive = mode->vdisplay;
>> +	vsa = mode->vsync_end - mode->vsync_start;
>> +	vfp = mode->vsync_start - mode->vdisplay;
>> +	vbp = mode->vtotal - mode->vsync_end;
>> +
>> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
>> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
>> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
>> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * data & clock lane timers should be computed according to panel
>> +	 * blankings and to the automatic clock lane control mode...
>> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
>> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
>> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
>> +
>> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
>> +		  | PHY_CLKLP2HS_TIME(0x40));
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * stop wait time should be the maximum between host dsi
>> +	 * and panel stop wait times
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
>> +		  N_LANES(dsi->lanes));
>> +}
>> +
>> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_read(dsi, DSI_INT_ST0);
>> +	dsi_read(dsi, DSI_INT_ST1);
>> +	dsi_write(dsi, DSI_INT_MSK0, 0);
>> +	dsi_write(dsi, DSI_INT_MSK1, 0);
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +
>> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	drm_panel_disable(dsi->panel);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	drm_panel_unprepare(dsi->panel);
>> +
>> +	dw_mipi_dsi_disable(dsi);
>> +	pm_runtime_put(dsi->dev);
>> +	clk_disable(dsi->pclk);
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_encoder *encoder = bridge->encoder;
>> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>> +	void *priv_data = dsi->plat_data->priv_data;
>> +	int ret;
>> +
>> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
>> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>> +
>> +	pm_runtime_get_sync(dsi->dev);
>> +	dw_mipi_dsi_init(dsi);
>> +	dw_mipi_dsi_dpi_config(dsi, mode);
>> +	dw_mipi_dsi_packet_handler_config(dsi);
>> +	dw_mipi_dsi_video_mode_config(dsi);
>> +	dw_mipi_dsi_video_packet_config(dsi, mode);
>> +	dw_mipi_dsi_command_mode_config(dsi);
>> +	dw_mipi_dsi_line_timer_config(dsi, mode);
>> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
>> +	dw_mipi_dsi_dphy_timing_config(dsi);
>> +	dw_mipi_dsi_dphy_interface_config(dsi);
>> +	dw_mipi_dsi_clear_err(dsi);
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * following command is inside dw_mipi_dsi_phy_init()
>> +	 * but this function is also required here. We way move it in the
>> +	 * phy but here we are using dsi regs...
>> +	 * maybe add the waiting loop here too...
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
>> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
>> +
>> +	ret = phy_ops->init(priv_data);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
>> +
>> +	dw_mipi_dsi_wait_for_two_frames(mode);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	if (drm_panel_prepare(dsi->panel))
>> +		dev_err(dsi->dev, "failed to prepare panel\n");
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
>> +	drm_panel_enable(dsi->panel);
>> +
>> +	clk_disable(dsi->pclk);
>> +
>> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
>> +}
>> +
>> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +
>> +	return drm_panel_get_modes(dsi->panel);
>> +}
>> +
>> +static enum drm_mode_status
>> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
>> +		       struct drm_display_mode *mode)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
>> +	enum drm_mode_status mode_status = MODE_OK;
>> +
>> +	if (pdata->mode_valid)
>> +		mode_status = pdata->mode_valid(pdata->priv_data,
>> +						connector, mode);
>> +
>> +	return mode_status;
>> +}
>> +
>> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
>> +	.get_modes = dw_mipi_dsi_connector_get_modes,
>> +	.mode_valid = dw_mipi_dsi_mode_valid,
>> +};
>> +
>> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
>> +{
>> +	drm_connector_unregister(connector);
>> +	drm_connector_cleanup(connector);
>> +}
>> +
>> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
>> +	.dpms = drm_atomic_helper_connector_dpms,
>> +	.fill_modes = drm_helper_probe_single_connector_modes,
>> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
>> +	.reset = drm_atomic_helper_connector_reset,
>> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_connector *connector = &dsi->connector;
>> +
>> +	if (!bridge->encoder) {
>> +		DRM_ERROR("Parent encoder object not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	/* Set the encoder type as caller does not know it */
>> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
>> +
>> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> +	drm_connector_helper_add(connector,
>> +				 &dw_mipi_dsi_connector_helper_funcs);
>> +
>> +	drm_connector_init(bridge->dev, connector,
>> +			   &dw_mipi_dsi_atomic_connector_funcs,
>> +			   DRM_MODE_CONNECTOR_DSI);
>> +
>> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>> +	.enable = dw_mipi_dsi_bridge_enable,
>> +	.disable = dw_mipi_dsi_bridge_disable,
>> +	.attach = dw_mipi_dsi_bridge_attach,
>> +};
>> +
>> +static struct dw_mipi_dsi *
>> +__dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		    const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct reset_control *apb_rst;
>> +	struct dw_mipi_dsi *dsi;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>> +	if (!dsi)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	dsi->dev = dev;
>> +	dsi->plat_data = plat_data;
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +
>> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
>> +		DRM_ERROR("Phy not properly configured\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	if (!plat_data->base) {
>> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +		if (!res)
>> +			return ERR_PTR(-ENODEV);
>> +
>> +		dsi->base = devm_ioremap_resource(dev, res);
>> +		if (IS_ERR(dsi->base))
>> +			return ERR_PTR(-ENODEV);
>> +
>> +	} else {
>> +		dsi->base = plat_data->base;
>> +	}
>> +
>> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
>> +	if (IS_ERR(dsi->pllref_clk)) {
>> +		ret = PTR_ERR(dsi->pllref_clk);
>> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	dsi->pclk = devm_clk_get(dev, "pclk");
>> +	if (IS_ERR(dsi->pclk)) {
>> +		ret = PTR_ERR(dsi->pclk);
>> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	/*
>> +	 * Note that the reset was not defined in the initial device tree, so
>> +	 * we have to be prepared for it not being found.
>> +	 */
>> +	apb_rst = devm_reset_control_get(dev, "apb");
>> +	if (IS_ERR(apb_rst)) {
>> +		ret = PTR_ERR(apb_rst);
>> +		if (ret == -ENOENT) {
>> +			apb_rst = NULL;
>> +		} else {
>> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
>> +			return ERR_PTR(ret);
>> +		}
>> +	}
>> +
>> +	if (apb_rst) {
>> +		ret = clk_prepare_enable(dsi->pclk);
>> +		if (ret) {
>> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
>> +			return ERR_PTR(ret);
>> +		}
>> +
>> +		reset_control_assert(apb_rst);
>> +		usleep_range(10, 20);
>> +		reset_control_deassert(apb_rst);
>> +
>> +		clk_disable(dsi->pclk);
>> +	}
>> +
>> +	ret = clk_prepare_enable(dsi->pllref_clk);
>> +	if (ret) {
>> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	pm_runtime_enable(dev);
>> +
>> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
>> +	dsi->dsi_host.dev = dev;
>> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
>> +		goto err_cleanup;
>> +	}
>> +
>> +	dsi->bridge.driver_private = dsi;
>> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
>> +#ifdef CONFIG_OF
>> +	dsi->bridge.of_node = pdev->dev.of_node;
>> +#endif
>> +
>> +	clk_enable(dsi->pclk);
>> +
>> +	dev_set_drvdata(dev, dsi);
>> +
>> +	return dsi;
>> +
>> +err_cleanup:
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +
>> +	return ERR_PTR(ret);
>> +}
>> +
>> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
>> +{
>> +	pm_runtime_disable(dsi->dev);
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +}
>> +
>> +/*
>> + * Probe/remove API, used from platforms based on the DRM bridge API.
>> + */
>> +int dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		      const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_add(&dsi->bridge);
>> +	if (ret < 0) {
>> +		__dw_mipi_dsi_remove(dsi);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
>> +
>> +void dw_mipi_dsi_remove(struct platform_device *pdev)
>> +{
>> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
>> +
>> +	mipi_dsi_host_unregister(&dsi->dsi_host);
>> +	drm_bridge_remove(&dsi->bridge);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
>> +
>> +/*
>> + * Bind/unbind API, used from platforms based on the component framework.
>> + */
>> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
>> +		     const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
>> +	if (ret) {
>> +		dw_mipi_dsi_remove(pdev);
>> +		DRM_ERROR("Failed to initialize bridge with drm\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
>> +
>> +void dw_mipi_dsi_unbind(struct device *dev)
>> +{
>> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
>> +
>> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
>> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
>> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:dw-mipi-dsi");
>>
> Hi Philippe,
> 
> Great, thanks. I did not look in detail, but it seems you forgot to add the dw_mipi_dsi.h file.
> 
> Neil
> 
Hi Neil,
Here below the content of the file include/drm/bridge/dw_mipi_dsi.h
(I will add it in v3 after integrating more comments).
Many thanks
Philippe

/*
  * Copyright (C) STMicroelectronics SA 2017
  *
  * Authors: Philippe Cornu <philippe.cornu@st.com>
  *          Yannick Fertre <yannick.fertre@st.com>
  *
  * License terms:  GNU General Public License (GPL), version 2
  */

#ifndef __DW_MIPI_DSI__
#define __DW_MIPI_DSI__

#include <drm/drmP.h>

struct dw_mipi_dsi_phy_ops {
	int (*init)(void *priv_data);
	int (*get_lane_mbps)(void *priv_data, struct drm_display_mode *mode,
			     struct clk *input_clk, u32 lanes, u32 format,
			     unsigned int *lane_mbps);
};

struct dw_mipi_dsi_plat_data {
	void __iomem *base;
	unsigned int max_data_lanes;

	enum drm_mode_status (*mode_valid)(void *priv_data,
					   struct drm_connector *connector,
					   struct drm_display_mode *mode);

	const struct dw_mipi_dsi_phy_ops *phy_ops;

	void *priv_data;
};

int dw_mipi_dsi_probe(struct platform_device *pdev,
		      const struct dw_mipi_dsi_plat_data *plat_data);
void dw_mipi_dsi_remove(struct platform_device *pdev);
int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder 
*encoder,
		     const struct dw_mipi_dsi_plat_data *plat_data);
void dw_mipi_dsi_unbind(struct device *dev);

#endif /* __DW_MIPI_DSI__ */

[PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Philippe CORNU]

On 05/19/2017 05:33 PM, Neil Armstrong wrote:
> On 05/19/2017 05:20 PM, Philippe CORNU wrote:
>> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
>> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>>
>> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
>> ---
>>   drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>>   drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>>   drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>>   3 files changed, 1035 insertions(+)
>>   create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> index 40d2827..d7fbdff 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>>   	help
>>   	  Support the I2S Audio interface which is part of the Synopsys
>>   	  Designware HDMI block.
>> +
>> +config DRM_DW_MIPI_DSI
>> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
>> +	select DRM_KMS_HELPER
>> +	select DRM_MIPI_DSI
>> +	select DRM_PANEL
>> +	help
>> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
>> +	  controller bridge.
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
>> index 17aa7a6..5f57d36 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
>> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
>> @@ -3,3 +3,5 @@
>>   obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>>   obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>>   obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
>> +
>> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> new file mode 100644
>> index 0000000..041f564
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> @@ -0,0 +1,1024 @@
>> +/*
>> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * Modified by Philippe Cornu <philippe.cornu@st.com>
>> + * This generic Synopsys Designware MIPI DSI host driver is based on the
>> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/bridge/dw_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define DSI_VERSION			0x00
>> +#define DSI_PWR_UP			0x04
>> +#define RESET				0
>> +#define POWERUP				BIT(0)
>> +
>> +#define DSI_CLKMGR_CFG			0x08
>> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
>> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
>> +
>> +#define DSI_DPI_VCID			0x0c
>> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
>> +
>> +#define DSI_DPI_COLOR_CODING		0x10
>> +#define EN18_LOOSELY			BIT(8)
>> +#define DPI_COLOR_CODING_16BIT_1	0x0
>> +#define DPI_COLOR_CODING_16BIT_2	0x1
>> +#define DPI_COLOR_CODING_16BIT_3	0x2
>> +#define DPI_COLOR_CODING_18BIT_1	0x3
>> +#define DPI_COLOR_CODING_18BIT_2	0x4
>> +#define DPI_COLOR_CODING_24BIT		0x5
>> +
>> +#define DSI_DPI_CFG_POL			0x14
>> +#define COLORM_ACTIVE_LOW		BIT(4)
>> +#define SHUTD_ACTIVE_LOW		BIT(3)
>> +#define HSYNC_ACTIVE_LOW		BIT(2)
>> +#define VSYNC_ACTIVE_LOW		BIT(1)
>> +#define DATAEN_ACTIVE_LOW		BIT(0)
>> +
>> +#define DSI_DPI_LP_CMD_TIM		0x18
>> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
>> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
>> +
>> +#define DSI_DBI_CFG			0x20
>> +#define DSI_DBI_CMDSIZE			0x28
>> +
>> +#define DSI_PCKHDL_CFG			0x2c
>> +#define EN_CRC_RX			BIT(4)
>> +#define EN_ECC_RX			BIT(3)
>> +#define EN_BTA				BIT(2)
>> +#define EN_EOTP_RX			BIT(1)
>> +#define EN_EOTP_TX			BIT(0)
>> +
>> +#define DSI_MODE_CFG			0x34
>> +#define ENABLE_VIDEO_MODE		0
>> +#define ENABLE_CMD_MODE			BIT(0)
>> +
>> +#define DSI_VID_MODE_CFG		0x38
>> +#define FRAME_BTA_ACK			BIT(14)
>> +#define ENABLE_LOW_POWER		(0x3f << 8)
>> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
>> +#define VID_MODE_TYPE_BURST			0x2
>> +#define VID_MODE_TYPE_MASK			0x3
>> +
>> +#define DSI_VID_PKT_SIZE		0x3c
>> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
>> +#define VID_PKT_MAX_SIZE		0x3fff
>> +
>> +#define DSI_VID_HSA_TIME		0x48
>> +#define DSI_VID_HBP_TIME		0x4c
>> +#define DSI_VID_HLINE_TIME		0x50
>> +#define DSI_VID_VSA_LINES		0x54
>> +#define DSI_VID_VBP_LINES		0x58
>> +#define DSI_VID_VFP_LINES		0x5c
>> +#define DSI_VID_VACTIVE_LINES		0x60
>> +#define DSI_CMD_MODE_CFG		0x68
>> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
>> +#define DCS_LW_TX_LP			BIT(19)
>> +#define DCS_SR_0P_TX_LP			BIT(18)
>> +#define DCS_SW_1P_TX_LP			BIT(17)
>> +#define DCS_SW_0P_TX_LP			BIT(16)
>> +#define GEN_LW_TX_LP			BIT(14)
>> +#define GEN_SR_2P_TX_LP			BIT(13)
>> +#define GEN_SR_1P_TX_LP			BIT(12)
>> +#define GEN_SR_0P_TX_LP			BIT(11)
>> +#define GEN_SW_2P_TX_LP			BIT(10)
>> +#define GEN_SW_1P_TX_LP			BIT(9)
>> +#define GEN_SW_0P_TX_LP			BIT(8)
>> +#define EN_ACK_RQST			BIT(1)
>> +#define EN_TEAR_FX			BIT(0)
>> +
>> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
>> +					 DCS_LW_TX_LP | \
>> +					 DCS_SR_0P_TX_LP | \
>> +					 DCS_SW_1P_TX_LP | \
>> +					 DCS_SW_0P_TX_LP | \
>> +					 GEN_LW_TX_LP | \
>> +					 GEN_SR_2P_TX_LP | \
>> +					 GEN_SR_1P_TX_LP | \
>> +					 GEN_SR_0P_TX_LP | \
>> +					 GEN_SW_2P_TX_LP | \
>> +					 GEN_SW_1P_TX_LP | \
>> +					 GEN_SW_0P_TX_LP)
>> +
>> +#define DSI_GEN_HDR			0x6c
>> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
>> +#define GEN_HDATA_MASK			(0xffff << 8)
>> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
>> +#define GEN_HTYPE_MASK			0xff
>> +
>> +#define DSI_GEN_PLD_DATA		0x70
>> +
>> +#define DSI_CMD_PKT_STATUS		0x74
>> +#define GEN_CMD_EMPTY			BIT(0)
>> +#define GEN_CMD_FULL			BIT(1)
>> +#define GEN_PLD_W_EMPTY			BIT(2)
>> +#define GEN_PLD_W_FULL			BIT(3)
>> +#define GEN_PLD_R_EMPTY			BIT(4)
>> +#define GEN_PLD_R_FULL			BIT(5)
>> +#define GEN_RD_CMD_BUSY			BIT(6)
>> +
>> +#define DSI_TO_CNT_CFG			0x78
>> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
>> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
>> +
>> +#define DSI_BTA_TO_CNT			0x8c
>> +#define DSI_LPCLK_CTRL			0x94
>> +#define AUTO_CLKLANE_CTRL		BIT(1)
>> +#define PHY_TXREQUESTCLKHS		BIT(0)
>> +
>> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
>> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
>> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
>> +
>> +#define DSI_PHY_TMR_CFG			0x9c
>> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
>> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
>> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
>> +
>> +#define DSI_PHY_RSTZ			0xa0
>> +#define PHY_DISFORCEPLL			0
>> +#define PHY_ENFORCEPLL			BIT(3)
>> +#define PHY_DISABLECLK			0
>> +#define PHY_ENABLECLK			BIT(2)
>> +#define PHY_RSTZ			0
>> +#define PHY_UNRSTZ			BIT(1)
>> +#define PHY_SHUTDOWNZ			0
>> +#define PHY_UNSHUTDOWNZ			BIT(0)
>> +
>> +#define DSI_PHY_IF_CFG			0xa4
>> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
>> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
>> +
>> +#define DSI_PHY_STATUS			0xb0
>> +#define LOCK				BIT(0)
>> +#define STOP_STATE_CLK_LANE		BIT(2)
>> +
>> +#define DSI_PHY_TST_CTRL0		0xb4
>> +#define PHY_TESTCLK			BIT(1)
>> +#define PHY_UNTESTCLK			0
>> +#define PHY_TESTCLR			BIT(0)
>> +#define PHY_UNTESTCLR			0
>> +
>> +#define DSI_PHY_TST_CTRL1		0xb8
>> +#define PHY_TESTEN			BIT(16)
>> +#define PHY_UNTESTEN			0
>> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
>> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
>> +
>> +#define DSI_INT_ST0			0xbc
>> +#define DSI_INT_ST1			0xc0
>> +#define DSI_INT_MSK0			0xc4
>> +#define DSI_INT_MSK1			0xc8
>> +
>> +#define PHY_STATUS_TIMEOUT_US		10000
>> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
>> +
>> +struct dw_mipi_dsi {
>> +	struct drm_bridge bridge;
>> +	struct drm_connector connector;
>> +	struct mipi_dsi_host dsi_host;
>> +	struct drm_panel *panel;
>> +	struct device *dev;
>> +	void __iomem *base;
>> +
>> +	struct clk *pllref_clk;
>> +	struct clk *pclk;
>> +
>> +	int dpms_mode;
>> +	unsigned int lane_mbps; /* per lane */
>> +	u32 channel;
>> +	u32 lanes;
>> +	u32 format;
>> +	unsigned long mode_flags;
>> +
>> +	const struct dw_mipi_dsi_plat_data *plat_data;
>> +};
>> +
>> +enum dw_mipi_dsi_mode {
>> +	DW_MIPI_DSI_CMD_MODE,
>> +	DW_MIPI_DSI_VID_MODE,
>> +};
>> +
>> +/*
>> + * The controller should generate 2 frames before
>> + * preparing the peripheral.
>> + */
>> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
>> +{
>> +	int refresh, two_frames;
>> +
>> +	refresh = drm_mode_vrefresh(mode);
>> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
>> +	msleep(two_frames);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
>> +{
>> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
>> +{
>> +	return container_of(con, struct dw_mipi_dsi, connector);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
>> +{
>> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
>> +}
>> +
>> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
>> +{
>> +	writel_relaxed(val, dsi->base + reg);
>> +}
>> +
>> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
>> +{
>> +	return readl_relaxed(dsi->base + reg);
>> +}
>> +
>> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
>> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
>> +			device->lanes);
>> +		return -EINVAL;
>> +	}
>> +
>> +	dsi->lanes = device->lanes;
>> +	dsi->channel = device->channel;
>> +	dsi->format = device->format;
>> +	dsi->mode_flags = device->mode_flags;
>> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
>> +	if (dsi->panel)
>> +		return drm_panel_attach(dsi->panel, &dsi->connector);
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	drm_panel_detach(dsi->panel);
>> +
>> +	return 0;
>> +}
>> +
>> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>> +				   const struct mipi_dsi_msg *msg)
>> +{
>> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
>> +	u32 val = 0;
>> +
>> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
>> +		val |= EN_ACK_RQST;
>> +	if (lpm)
>> +		val |= CMD_MODE_ALL_LP;
>> +
>> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
>> +
>> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
>> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +
>> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
>> +}
>> +
>> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
>> +{
>> +	int ret;
>> +	u32 val, mask;
>> +
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, !(val & GEN_CMD_FULL), 1000,
>> +				 CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
>> +
>> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, (val & mask) == mask,
>> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to write command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
>> +				       const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	u16 data = 0;
>> +	u32 val;
>> +
>> +	if (msg->tx_len > 0)
>> +		data |= tx_buf[0];
>> +	if (msg->tx_len > 1)
>> +		data |= tx_buf[1] << 8;
>> +
>> +	if (msg->tx_len > 2) {
>> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
>> +				      const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
>> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
>> +	u32 remainder;
>> +	u32 val;
>> +
>> +	if (msg->tx_len < 3) {
>> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
>> +		if (len < pld_data_bytes) {
>> +			remainder = 0;
>> +			memcpy(&remainder, tx_buf, len);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			len = 0;
>> +		} else {
>> +			memcpy(&remainder, tx_buf, pld_data_bytes);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			tx_buf += pld_data_bytes;
>> +			len -= pld_data_bytes;
>> +		}
>> +
>> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +					 val, !(val & GEN_PLD_W_FULL), 1000,
>> +					 CMD_PKT_STATUS_TIMEOUT_US);
>> +		if (ret < 0) {
>> +			dev_err(dsi->dev,
>> +				"failed to get available write payload FIFO\n");
>> +			return ret;
>> +		}
>> +	}
>> +
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
>> +}
>> +
>> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
>> +					 const struct mipi_dsi_msg *msg)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +	int ret;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * use mipi_dsi_create_packet() instead of all following
>> +	 * functions and code (no switch cases, no
>> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
>> +	 * and use packet.header...
>> +	 */
>> +	dw_mipi_message_config(dsi, msg);
>> +
>> +	switch (msg->type) {
>> +	case MIPI_DSI_DCS_SHORT_WRITE:
>> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
>> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
>> +		break;
>> +	case MIPI_DSI_DCS_LONG_WRITE:
>> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
>> +		break;
>> +	default:
>> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
>> +			msg->type);
>> +		ret = -EINVAL;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
>> +	.attach = dw_mipi_dsi_host_attach,
>> +	.detach = dw_mipi_dsi_host_detach,
>> +	.transfer = dw_mipi_dsi_host_transfer,
>> +};
>> +
>> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	u32 val;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * enabling low power is panel-dependent, we should use the
>> +	 * panel configuration here...
>> +	 */
>> +	val = ENABLE_LOW_POWER;
>> +
>> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
>> +		val |= VID_MODE_TYPE_BURST;
>> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
>> +	else
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>> +
>> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> +}
>> +
>> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
>> +				 enum dw_mipi_dsi_mode mode)
>> +{
>> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	} else {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
>> +		dw_mipi_dsi_video_mode_config(dsi);
>> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	}
>> +}
>> +
>> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
>> +}
>> +
>> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * The maximum permitted escape clock is 20MHz and it is derived from
>> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
>> +	 *
>> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
>> +	 * which is:
>> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
>> +	 */
>> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
>> +
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
>> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * timeout clock division should be computed with the
>> +	 * high speed transmission counter timeout and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
>> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
>> +}
>> +
>> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
>> +				   struct drm_display_mode *mode)
>> +{
>> +	u32 val = 0, color = 0;
>> +
>> +	switch (dsi->format) {
>> +	case MIPI_DSI_FMT_RGB888:
>> +		color = DPI_COLOR_CODING_24BIT;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666:
>> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666_PACKED:
>> +		color = DPI_COLOR_CODING_18BIT_1;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB565:
>> +		color = DPI_COLOR_CODING_16BIT_1;
>> +		break;
>> +	}
>> +
>> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> +		val |= VSYNC_ACTIVE_LOW;
>> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> +		val |= HSYNC_ACTIVE_LOW;
>> +
>> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
>> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
>> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
>> +	 * should be computed according to byte lane, lane number and only
>> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
>> +	 */
>> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
>> +		  | INVACT_LPCMD_TIME(4));
>> +}
>> +
>> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
>> +}
>> +
>> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
>> +					    struct drm_display_mode *mode)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * only burst mode is supported here. For non-burst video modes,
>> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
>> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
>> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
>> +	 */
>> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
>> +}
>> +
>> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * compute high speed transmission counter timeout according
>> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * the Bus-Turn-Around Timeout Counter should be computed
>> +	 * according to byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
>> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +}
>> +
>> +/* Get lane byte clock cycles. */
>> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
>> +					   struct drm_display_mode *mode,
>> +					   u32 hcomponent)
>> +{
>> +	u32 frac, lbcc;
>> +
>> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
>> +
>> +	frac = lbcc % mode->clock;
>> +	lbcc = lbcc / mode->clock;
>> +	if (frac)
>> +		lbcc++;
>> +
>> +	return lbcc;
>> +}
>> +
>> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
>> +					  struct drm_display_mode *mode)
>> +{
>> +	u32 htotal, hsa, hbp, lbcc;
>> +
>> +	htotal = mode->htotal;
>> +	hsa = mode->hsync_end - mode->hsync_start;
>> +	hbp = mode->htotal - mode->hsync_end;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * computations below may be improved...
>> +	 */
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
>> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
>> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
>> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
>> +}
>> +
>> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
>> +					       struct drm_display_mode *mode)
>> +{
>> +	u32 vactive, vsa, vfp, vbp;
>> +
>> +	vactive = mode->vdisplay;
>> +	vsa = mode->vsync_end - mode->vsync_start;
>> +	vfp = mode->vsync_start - mode->vdisplay;
>> +	vbp = mode->vtotal - mode->vsync_end;
>> +
>> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
>> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
>> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
>> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * data & clock lane timers should be computed according to panel
>> +	 * blankings and to the automatic clock lane control mode...
>> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
>> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
>> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
>> +
>> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
>> +		  | PHY_CLKLP2HS_TIME(0x40));
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * stop wait time should be the maximum between host dsi
>> +	 * and panel stop wait times
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
>> +		  N_LANES(dsi->lanes));
>> +}
>> +
>> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_read(dsi, DSI_INT_ST0);
>> +	dsi_read(dsi, DSI_INT_ST1);
>> +	dsi_write(dsi, DSI_INT_MSK0, 0);
>> +	dsi_write(dsi, DSI_INT_MSK1, 0);
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +
>> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	drm_panel_disable(dsi->panel);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	drm_panel_unprepare(dsi->panel);
>> +
>> +	dw_mipi_dsi_disable(dsi);
>> +	pm_runtime_put(dsi->dev);
>> +	clk_disable(dsi->pclk);
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_encoder *encoder = bridge->encoder;
>> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>> +	void *priv_data = dsi->plat_data->priv_data;
>> +	int ret;
>> +
>> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
>> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>> +
>> +	pm_runtime_get_sync(dsi->dev);
>> +	dw_mipi_dsi_init(dsi);
>> +	dw_mipi_dsi_dpi_config(dsi, mode);
>> +	dw_mipi_dsi_packet_handler_config(dsi);
>> +	dw_mipi_dsi_video_mode_config(dsi);
>> +	dw_mipi_dsi_video_packet_config(dsi, mode);
>> +	dw_mipi_dsi_command_mode_config(dsi);
>> +	dw_mipi_dsi_line_timer_config(dsi, mode);
>> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
>> +	dw_mipi_dsi_dphy_timing_config(dsi);
>> +	dw_mipi_dsi_dphy_interface_config(dsi);
>> +	dw_mipi_dsi_clear_err(dsi);
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * following command is inside dw_mipi_dsi_phy_init()
>> +	 * but this function is also required here. We way move it in the
>> +	 * phy but here we are using dsi regs...
>> +	 * maybe add the waiting loop here too...
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
>> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
>> +
>> +	ret = phy_ops->init(priv_data);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
>> +
>> +	dw_mipi_dsi_wait_for_two_frames(mode);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	if (drm_panel_prepare(dsi->panel))
>> +		dev_err(dsi->dev, "failed to prepare panel\n");
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
>> +	drm_panel_enable(dsi->panel);
>> +
>> +	clk_disable(dsi->pclk);
>> +
>> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
>> +}
>> +
>> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +
>> +	return drm_panel_get_modes(dsi->panel);
>> +}
>> +
>> +static enum drm_mode_status
>> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
>> +		       struct drm_display_mode *mode)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
>> +	enum drm_mode_status mode_status = MODE_OK;
>> +
>> +	if (pdata->mode_valid)
>> +		mode_status = pdata->mode_valid(pdata->priv_data,
>> +						connector, mode);
>> +
>> +	return mode_status;
>> +}
>> +
>> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
>> +	.get_modes = dw_mipi_dsi_connector_get_modes,
>> +	.mode_valid = dw_mipi_dsi_mode_valid,
>> +};
>> +
>> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
>> +{
>> +	drm_connector_unregister(connector);
>> +	drm_connector_cleanup(connector);
>> +}
>> +
>> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
>> +	.dpms = drm_atomic_helper_connector_dpms,
>> +	.fill_modes = drm_helper_probe_single_connector_modes,
>> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
>> +	.reset = drm_atomic_helper_connector_reset,
>> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_connector *connector = &dsi->connector;
>> +
>> +	if (!bridge->encoder) {
>> +		DRM_ERROR("Parent encoder object not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	/* Set the encoder type as caller does not know it */
>> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
>> +
>> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> +	drm_connector_helper_add(connector,
>> +				 &dw_mipi_dsi_connector_helper_funcs);
>> +
>> +	drm_connector_init(bridge->dev, connector,
>> +			   &dw_mipi_dsi_atomic_connector_funcs,
>> +			   DRM_MODE_CONNECTOR_DSI);
>> +
>> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>> +	.enable = dw_mipi_dsi_bridge_enable,
>> +	.disable = dw_mipi_dsi_bridge_disable,
>> +	.attach = dw_mipi_dsi_bridge_attach,
>> +};
>> +
>> +static struct dw_mipi_dsi *
>> +__dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		    const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct reset_control *apb_rst;
>> +	struct dw_mipi_dsi *dsi;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>> +	if (!dsi)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	dsi->dev = dev;
>> +	dsi->plat_data = plat_data;
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +
>> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
>> +		DRM_ERROR("Phy not properly configured\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	if (!plat_data->base) {
>> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +		if (!res)
>> +			return ERR_PTR(-ENODEV);
>> +
>> +		dsi->base = devm_ioremap_resource(dev, res);
>> +		if (IS_ERR(dsi->base))
>> +			return ERR_PTR(-ENODEV);
>> +
>> +	} else {
>> +		dsi->base = plat_data->base;
>> +	}
>> +
>> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
>> +	if (IS_ERR(dsi->pllref_clk)) {
>> +		ret = PTR_ERR(dsi->pllref_clk);
>> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	dsi->pclk = devm_clk_get(dev, "pclk");
>> +	if (IS_ERR(dsi->pclk)) {
>> +		ret = PTR_ERR(dsi->pclk);
>> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	/*
>> +	 * Note that the reset was not defined in the initial device tree, so
>> +	 * we have to be prepared for it not being found.
>> +	 */
>> +	apb_rst = devm_reset_control_get(dev, "apb");
>> +	if (IS_ERR(apb_rst)) {
>> +		ret = PTR_ERR(apb_rst);
>> +		if (ret == -ENOENT) {
>> +			apb_rst = NULL;
>> +		} else {
>> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
>> +			return ERR_PTR(ret);
>> +		}
>> +	}
>> +
>> +	if (apb_rst) {
>> +		ret = clk_prepare_enable(dsi->pclk);
>> +		if (ret) {
>> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
>> +			return ERR_PTR(ret);
>> +		}
>> +
>> +		reset_control_assert(apb_rst);
>> +		usleep_range(10, 20);
>> +		reset_control_deassert(apb_rst);
>> +
>> +		clk_disable(dsi->pclk);
>> +	}
>> +
>> +	ret = clk_prepare_enable(dsi->pllref_clk);
>> +	if (ret) {
>> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	pm_runtime_enable(dev);
>> +
>> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
>> +	dsi->dsi_host.dev = dev;
>> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
>> +		goto err_cleanup;
>> +	}
>> +
>> +	dsi->bridge.driver_private = dsi;
>> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
>> +#ifdef CONFIG_OF
>> +	dsi->bridge.of_node = pdev->dev.of_node;
>> +#endif
>> +
>> +	clk_enable(dsi->pclk);
>> +
>> +	dev_set_drvdata(dev, dsi);
>> +
>> +	return dsi;
>> +
>> +err_cleanup:
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +
>> +	return ERR_PTR(ret);
>> +}
>> +
>> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
>> +{
>> +	pm_runtime_disable(dsi->dev);
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +}
>> +
>> +/*
>> + * Probe/remove API, used from platforms based on the DRM bridge API.
>> + */
>> +int dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		      const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_add(&dsi->bridge);
>> +	if (ret < 0) {
>> +		__dw_mipi_dsi_remove(dsi);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
>> +
>> +void dw_mipi_dsi_remove(struct platform_device *pdev)
>> +{
>> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
>> +
>> +	mipi_dsi_host_unregister(&dsi->dsi_host);
>> +	drm_bridge_remove(&dsi->bridge);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
>> +
>> +/*
>> + * Bind/unbind API, used from platforms based on the component framework.
>> + */
>> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
>> +		     const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
>> +	if (ret) {
>> +		dw_mipi_dsi_remove(pdev);
>> +		DRM_ERROR("Failed to initialize bridge with drm\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
>> +
>> +void dw_mipi_dsi_unbind(struct device *dev)
>> +{
>> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
>> +
>> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
>> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
>> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:dw-mipi-dsi");
>>
> Hi Philippe,
> 
> Great, thanks. I did not look in detail, but it seems you forgot to add the dw_mipi_dsi.h file.
> 
> Neil
> 
Hi Neil,
Here below the content of the file include/drm/bridge/dw_mipi_dsi.h
(I will add it in v3 after integrating more comments).
Many thanks
Philippe

/*
  * Copyright (C) STMicroelectronics SA 2017
  *
  * Authors: Philippe Cornu <philippe.cornu@st.com>
  *          Yannick Fertre <yannick.fertre@st.com>
  *
  * License terms:  GNU General Public License (GPL), version 2
  */

#ifndef __DW_MIPI_DSI__
#define __DW_MIPI_DSI__

#include <drm/drmP.h>

struct dw_mipi_dsi_phy_ops {
	int (*init)(void *priv_data);
	int (*get_lane_mbps)(void *priv_data, struct drm_display_mode *mode,
			     struct clk *input_clk, u32 lanes, u32 format,
			     unsigned int *lane_mbps);
};

struct dw_mipi_dsi_plat_data {
	void __iomem *base;
	unsigned int max_data_lanes;

	enum drm_mode_status (*mode_valid)(void *priv_data,
					   struct drm_connector *connector,
					   struct drm_display_mode *mode);

	const struct dw_mipi_dsi_phy_ops *phy_ops;

	void *priv_data;
};

int dw_mipi_dsi_probe(struct platform_device *pdev,
		      const struct dw_mipi_dsi_plat_data *plat_data);
void dw_mipi_dsi_remove(struct platform_device *pdev);
int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder 
*encoder,
		     const struct dw_mipi_dsi_plat_data *plat_data);
void dw_mipi_dsi_unbind(struct device *dev);

#endif /* __DW_MIPI_DSI__ */

Re: [PATCH v2 1/5] drm/stm: ltdc: Add bridge support

[Eric Anholt]

[-- Attachment #1: Type: text/plain, Size: 660 bytes --]

Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org> writes:

> Add the bridge support, used by DSI host and HDMI/LVDS bridges.
>
> Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>

The DW DSI host is bridging from MIPI DPI to MIPI DSI, right?  I think
you could just have ltdc always set up a DPI encoder (the
ltdc_rgb_encoder_create() function), and then depending on whether
drm_of_find_panel_or_bridge() finds you a panel or a bridge, you
drm_panel_attach() or drm_bridge_attach().

You wouldn't even need to wrap the drm_panel_prepare() and related calls
with a check for the panel, because the inlines already do that.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 832 bytes --]

[PATCH v2 1/5] drm/stm: ltdc: Add bridge support

[Eric Anholt]

Philippe CORNU <philippe.cornu@st.com> writes:

> Add the bridge support, used by DSI host and HDMI/LVDS bridges.
>
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>

The DW DSI host is bridging from MIPI DPI to MIPI DSI, right?  I think
you could just have ltdc always set up a DPI encoder (the
ltdc_rgb_encoder_create() function), and then depending on whether
drm_of_find_panel_or_bridge() finds you a panel or a bridge, you
drm_panel_attach() or drm_bridge_attach().

You wouldn't even need to wrap the drm_panel_prepare() and related calls
with a check for the panel, because the inlines already do that.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170519/5b2ecd02/attachment.sig>

Re: [PATCH v2 1/5] drm/stm: ltdc: Add bridge support

[Andrzej Hajda]

Hi Philippe,

W dniu 2017-05-20 o 00:20, Philippe CORNU pisze:
> Add the bridge support, used by DSI host and HDMI/LVDS bridges.
>
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>   drivers/gpu/drm/stm/ltdc.c | 74 ++++++++++++++++++++++++++++++++++------------
>   drivers/gpu/drm/stm/ltdc.h |  1 +
>   2 files changed, 56 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index 7b2d63b..809e420 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -858,6 +858,43 @@ static struct drm_encoder *ltdc_rgb_encoder_create(struct drm_device *ddev)
>   	return encoder;
>   }
>   
> +static const struct drm_encoder_funcs bridge_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
> +struct drm_encoder *bridge_encoder_create(struct drm_device *ddev,
> +					  struct drm_bridge *bridge)
> +{
> +	struct drm_encoder *encoder;
> +	int ret;
> +
> +	encoder = devm_kzalloc(ddev->dev, sizeof(*encoder), GFP_KERNEL);
> +	if (!encoder)
> +		return NULL;
> +
> +	encoder->possible_crtcs = CRTC_MASK;
> +	encoder->possible_clones = 0; /* No cloning support */
> +
> +	drm_encoder_init(ddev, encoder, &bridge_encoder_funcs,
> +			 DRM_MODE_ENCODER_TMDS, NULL);
> +
> +	drm_encoder_helper_add(encoder, NULL);
> +
> +	/* Link drm_bridge to encoder */
> +	bridge->encoder = encoder;
> +	encoder->bridge = bridge;

I think the above two lines are redundant, drm_bridge_attach should do that.

> +
> +	ret = drm_bridge_attach(encoder, bridge, NULL);
> +	if (ret) {
> +		drm_encoder_cleanup(encoder);
> +		return NULL;
> +	}
> +
> +	DRM_DEBUG_DRIVER("Bridge encoder:%d created\n", encoder->base.id);
> +
> +	return encoder;
> +}
> +
>   /*
>    * DRM_CONNECTOR
>    */
> @@ -967,12 +1004,13 @@ static int ltdc_get_caps(struct drm_device *ddev)
>   	return 0;
>   }
>   
> -static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
> +static int ltdc_parse_dt(struct drm_device *ddev)
>   {
> +	struct ltdc_device *ldev = ddev->dev_private;
>   	struct device *dev = ddev->dev;
>   	struct device_node *np = dev->of_node;
> -	struct device_node *entity, *port = NULL;
> -	struct drm_panel *panel = NULL;
> +	struct device_node *entity;
> +	int ret;
>   
>   	DRM_DEBUG_DRIVER("\n");
>   
> @@ -985,21 +1023,13 @@ static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
>   		if (!of_device_is_available(entity))
>   			continue;
>   
> -		port = of_graph_get_remote_port_parent(entity);
> -		if (port) {
> -			panel = of_drm_find_panel(port);
> -			of_node_put(port);
> -			if (panel) {
> -				DRM_DEBUG_DRIVER("remote panel %s\n",
> -						 port->full_name);
> -			} else {
> -				DRM_DEBUG_DRIVER("panel missing\n");
> -				of_node_put(entity);
> -			}
> -		}
> +		ret = drm_of_find_panel_or_bridge(np, 0, 0,
> +						  &ldev->panel, &ldev->bridge);
> +		if (ret)
> +			return ret;
>   	}
>   
> -	return panel;
> +	return 0;
>   }
>   
>   int ltdc_load(struct drm_device *ddev)
> @@ -1017,9 +1047,9 @@ int ltdc_load(struct drm_device *ddev)
>   
>   	DRM_DEBUG_DRIVER("\n");
>   
> -	ldev->panel = ltdc_get_panel(ddev);
> -	if (!ldev->panel)
> -		return -EPROBE_DEFER;
> +	ret = ltdc_parse_dt(ddev);
> +	if (ret)
> +		return ret;
>   
>   	rstc = of_reset_control_get(np, NULL);
>   
> @@ -1077,6 +1107,12 @@ int ltdc_load(struct drm_device *ddev)
>   
>   	DRM_INFO("ltdc hw version 0x%08x - ready\n", ldev->caps.hw_version);
>   
> +	if (ldev->bridge) {
> +		encoder = bridge_encoder_create(ddev, ldev->bridge);
> +		if (!encoder)
> +			return -EINVAL;
> +	}
> +

I guess you could add 'else' clause after closing bracket - ldev->bridge 
and ldev->panel are mutually exclusive, but it is up to you.

Beside this:
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Regards
Andrzej

>   	if (ldev->panel) {
>   		encoder = ltdc_rgb_encoder_create(ddev);
>   		if (!encoder) {
> diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
> index 5427ef4..0083cad 100644
> --- a/drivers/gpu/drm/stm/ltdc.h
> +++ b/drivers/gpu/drm/stm/ltdc.h
> @@ -25,6 +25,7 @@ struct ltdc_device {
>   	void __iomem *regs;
>   	struct clk *pixel_clk;	/* lcd pixel clock */
>   	struct drm_panel *panel;
> +	struct drm_bridge *bridge;
>   	struct spinlock lock;	/* protecting irq status register */
>   	struct ltdc_caps caps;
>   	u32 clut[256];		/* color look up table */

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v2 1/5] drm/stm: ltdc: Add bridge support

[Andrzej Hajda]

Hi Philippe,

W dniu 2017-05-20 o 00:20, Philippe CORNU pisze:
> Add the bridge support, used by DSI host and HDMI/LVDS bridges.
>
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>   drivers/gpu/drm/stm/ltdc.c | 74 ++++++++++++++++++++++++++++++++++------------
>   drivers/gpu/drm/stm/ltdc.h |  1 +
>   2 files changed, 56 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> index 7b2d63b..809e420 100644
> --- a/drivers/gpu/drm/stm/ltdc.c
> +++ b/drivers/gpu/drm/stm/ltdc.c
> @@ -858,6 +858,43 @@ static struct drm_encoder *ltdc_rgb_encoder_create(struct drm_device *ddev)
>   	return encoder;
>   }
>   
> +static const struct drm_encoder_funcs bridge_encoder_funcs = {
> +	.destroy = drm_encoder_cleanup,
> +};
> +
> +struct drm_encoder *bridge_encoder_create(struct drm_device *ddev,
> +					  struct drm_bridge *bridge)
> +{
> +	struct drm_encoder *encoder;
> +	int ret;
> +
> +	encoder = devm_kzalloc(ddev->dev, sizeof(*encoder), GFP_KERNEL);
> +	if (!encoder)
> +		return NULL;
> +
> +	encoder->possible_crtcs = CRTC_MASK;
> +	encoder->possible_clones = 0; /* No cloning support */
> +
> +	drm_encoder_init(ddev, encoder, &bridge_encoder_funcs,
> +			 DRM_MODE_ENCODER_TMDS, NULL);
> +
> +	drm_encoder_helper_add(encoder, NULL);
> +
> +	/* Link drm_bridge to encoder */
> +	bridge->encoder = encoder;
> +	encoder->bridge = bridge;

I think the above two lines are redundant, drm_bridge_attach should do that.

> +
> +	ret = drm_bridge_attach(encoder, bridge, NULL);
> +	if (ret) {
> +		drm_encoder_cleanup(encoder);
> +		return NULL;
> +	}
> +
> +	DRM_DEBUG_DRIVER("Bridge encoder:%d created\n", encoder->base.id);
> +
> +	return encoder;
> +}
> +
>   /*
>    * DRM_CONNECTOR
>    */
> @@ -967,12 +1004,13 @@ static int ltdc_get_caps(struct drm_device *ddev)
>   	return 0;
>   }
>   
> -static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
> +static int ltdc_parse_dt(struct drm_device *ddev)
>   {
> +	struct ltdc_device *ldev = ddev->dev_private;
>   	struct device *dev = ddev->dev;
>   	struct device_node *np = dev->of_node;
> -	struct device_node *entity, *port = NULL;
> -	struct drm_panel *panel = NULL;
> +	struct device_node *entity;
> +	int ret;
>   
>   	DRM_DEBUG_DRIVER("\n");
>   
> @@ -985,21 +1023,13 @@ static struct drm_panel *ltdc_get_panel(struct drm_device *ddev)
>   		if (!of_device_is_available(entity))
>   			continue;
>   
> -		port = of_graph_get_remote_port_parent(entity);
> -		if (port) {
> -			panel = of_drm_find_panel(port);
> -			of_node_put(port);
> -			if (panel) {
> -				DRM_DEBUG_DRIVER("remote panel %s\n",
> -						 port->full_name);
> -			} else {
> -				DRM_DEBUG_DRIVER("panel missing\n");
> -				of_node_put(entity);
> -			}
> -		}
> +		ret = drm_of_find_panel_or_bridge(np, 0, 0,
> +						  &ldev->panel, &ldev->bridge);
> +		if (ret)
> +			return ret;
>   	}
>   
> -	return panel;
> +	return 0;
>   }
>   
>   int ltdc_load(struct drm_device *ddev)
> @@ -1017,9 +1047,9 @@ int ltdc_load(struct drm_device *ddev)
>   
>   	DRM_DEBUG_DRIVER("\n");
>   
> -	ldev->panel = ltdc_get_panel(ddev);
> -	if (!ldev->panel)
> -		return -EPROBE_DEFER;
> +	ret = ltdc_parse_dt(ddev);
> +	if (ret)
> +		return ret;
>   
>   	rstc = of_reset_control_get(np, NULL);
>   
> @@ -1077,6 +1107,12 @@ int ltdc_load(struct drm_device *ddev)
>   
>   	DRM_INFO("ltdc hw version 0x%08x - ready\n", ldev->caps.hw_version);
>   
> +	if (ldev->bridge) {
> +		encoder = bridge_encoder_create(ddev, ldev->bridge);
> +		if (!encoder)
> +			return -EINVAL;
> +	}
> +

I guess you could add 'else' clause after closing bracket - ldev->bridge 
and ldev->panel are mutually exclusive, but it is up to you.

Beside this:
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Regards
Andrzej

>   	if (ldev->panel) {
>   		encoder = ltdc_rgb_encoder_create(ddev);
>   		if (!encoder) {
> diff --git a/drivers/gpu/drm/stm/ltdc.h b/drivers/gpu/drm/stm/ltdc.h
> index 5427ef4..0083cad 100644
> --- a/drivers/gpu/drm/stm/ltdc.h
> +++ b/drivers/gpu/drm/stm/ltdc.h
> @@ -25,6 +25,7 @@ struct ltdc_device {
>   	void __iomem *regs;
>   	struct clk *pixel_clk;	/* lcd pixel clock */
>   	struct drm_panel *panel;
> +	struct drm_bridge *bridge;
>   	struct spinlock lock;	/* protecting irq status register */
>   	struct ltdc_caps caps;
>   	u32 clut[256];		/* color look up table */

Re: [PATCH v2 2/5] dt-bindings: display: Add Synopsys DW MIPI DSI DRM bridge driver

[Rob Herring]

On Fri, May 19, 2017 at 05:20:15PM +0200, Philippe CORNU wrote:
> This patch adds documentation of device tree bindings for the
> Synopsys DesignWare MIPI DSI host DRM bridge driver.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
> ---
>  .../bindings/display/bridge/dw_mipi_dsi.txt        | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> new file mode 100644
> index 0000000..652c0f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> @@ -0,0 +1,36 @@
> +Synopsys DesignWare MIPI DSI host controller
> +============================================
> +
> +This document defines device tree properties for the Synopsys DesignWare MIPI
> +DSI host controller. It doesn't constitue a device tree binding specification
> +by itself but is meant to be referenced by platform-specific device tree
> +bindings.
> +
> +When referenced from platform device tree bindings the properties defined in
> +this document are defined as follows. The platform device tree bindings are
> +responsible for defining whether each property is required or optional.
> +
> +- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
> +
> +- clocks: References to all the clocks specified in the clock-names property
> +  as specified in [1].
> +
> +- clock-names: The DWC MIPI DSI host uses the following clocks.
> +
> +  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
> +  - "ref" is the pll reference clock (mandatory).
> +
> +- resets: References to all the resets specified in the reset-names property
> +  as specified in [2]. (optional)
> +
> +- reset-names: string reset name, must be "apb" if used. (optional)
> +
> +- ports: The connectivity of the DWC MIPI DSI host controller
> +  with the rest of the system is expressed in using ports as specified in the
> +  device graph bindings in [3] & [4]. The numbering of the ports
> +  is platform-specific.

Why is numbering platform specific? Are there differing numbers of 
independent channels? I'm fine if platforms can override, but can we 
define what is the default or common case?

> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/reset/reset.txt
> +[3] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[4] Documentation/devicetree/bindings/graph.txt
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 2/5] dt-bindings: display: Add Synopsys DW MIPI DSI DRM bridge driver

[Rob Herring]

On Fri, May 19, 2017 at 05:20:15PM +0200, Philippe CORNU wrote:
> This patch adds documentation of device tree bindings for the
> Synopsys DesignWare MIPI DSI host DRM bridge driver.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>  .../bindings/display/bridge/dw_mipi_dsi.txt        | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> new file mode 100644
> index 0000000..652c0f5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> @@ -0,0 +1,36 @@
> +Synopsys DesignWare MIPI DSI host controller
> +============================================
> +
> +This document defines device tree properties for the Synopsys DesignWare MIPI
> +DSI host controller. It doesn't constitue a device tree binding specification
> +by itself but is meant to be referenced by platform-specific device tree
> +bindings.
> +
> +When referenced from platform device tree bindings the properties defined in
> +this document are defined as follows. The platform device tree bindings are
> +responsible for defining whether each property is required or optional.
> +
> +- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
> +
> +- clocks: References to all the clocks specified in the clock-names property
> +  as specified in [1].
> +
> +- clock-names: The DWC MIPI DSI host uses the following clocks.
> +
> +  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
> +  - "ref" is the pll reference clock (mandatory).
> +
> +- resets: References to all the resets specified in the reset-names property
> +  as specified in [2]. (optional)
> +
> +- reset-names: string reset name, must be "apb" if used. (optional)
> +
> +- ports: The connectivity of the DWC MIPI DSI host controller
> +  with the rest of the system is expressed in using ports as specified in the
> +  device graph bindings in [3] & [4]. The numbering of the ports
> +  is platform-specific.

Why is numbering platform specific? Are there differing numbers of 
independent channels? I'm fine if platforms can override, but can we 
define what is the default or common case?

> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/reset/reset.txt
> +[3] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[4] Documentation/devicetree/bindings/graph.txt
> -- 
> 1.9.1
> 

Re: [PATCH v2 4/5] dt-bindings: display: Add STM32 DSI host driver

[Rob Herring]

On Fri, May 19, 2017 at 05:20:17PM +0200, Philippe CORNU wrote:
> This patch adds documentation of device tree bindings for the STM32
> DSI host driver based on the Synopsys DW MIPI DSI driver from Rockchip.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
> ---
>  .../devicetree/bindings/display/st,stm32-ltdc.txt  | 102 ++++++++++++++++++++-
>  1 file changed, 100 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> index 8e14769..18a57a2 100644
> --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> @@ -1,7 +1,6 @@
>  * STMicroelectronics STM32 lcd-tft display controller
>  
>  - ltdc: lcd-tft display controller host
> -  must be a sub-node of st-display-subsystem
>    Required properties:
>    - compatible: "st,stm32-ltdc"
>    - reg: Physical base address of the IP registers and length of memory mapped region.
> @@ -13,8 +12,37 @@
>    Required nodes:
>      - Video port for RGB output.
>  
> -Example:
> +* STMicroelectronics STM32 specific extensions to Synopsys DesignWare MIPI DSI
>  
> +Required properties:
> +- #address-cells: Should be <1>.
> +- #size-cells: Should be <0>.
> +- compatible: "st,stm32-dsi".
> +- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
> +- clocks: References to all the clocks specified in the clock-names property
> +  as specified in [1].
> +- clock-names: The DWC MIPI DSI host uses the following clocks.
> +  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
> +  - "ref" is the pll reference clock (mandatory).

Just "See [5]" is enough description here.

> +- resets: References to all the resets specified in the reset-names property
> +  as specified in [2]. (optional)
> +- reset-names: string reset name, must be "apb" if used. (optional)
> +- ports: The connectivity of the DWC MIPI DSI host controller
> +  with the rest of the system is expressed in using ports as specified in the
> +  device graph bindings in [2].
> +  - port@0 is the dsi input, connected to the ltdc output port.
> +  - port@1 is the dsi output, connected to the dsi panel or bridge.
> +
> +Note: You can find more documentation related to the Synopsys DesignWare MIPI
> +DSI host controller in [5].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/reset/reset.txt
> +[3] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[4] Documentation/devicetree/bindings/graph.txt
> +[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> +
> +Example 1: RGB panel
>  / {
>  	...
>  	soc {
> @@ -34,3 +62,73 @@ Example:
>  		};
>  	};
>  };
> +
> +Example 2: DSI panel
> +
> +/ {
> +	...
> +	soc {
> +	...
> +		ltdc: display-controller@40016800 {
> +			compatible = "st,stm32-ltdc";
> +			reg = <0x40016800 0x200>;
> +			interrupts = <88>, <89>;
> +			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
> +			clocks = <&rcc 1 CLK_LCD>;
> +			clock-names = "lcd";
> +
> +			port {
> +				ltdc_out_dsi: endpoint {
> +					remote-endpoint = <&dsi_in>;
> +				};
> +			};
> +		};
> +
> +
> +		dsi: dsi@40016C00 {

nit: lowercase hex

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "st,stm32-dsi";
> +			reg = <0x40016C00 0x800>;

here too.

> +			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
> +			clock-names = "ref", "pclk";
> +			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
> +			reset-names = "apb";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port@0 {
> +					reg = <0>;
> +					dsi_in: endpoint {
> +						remote-endpoint = <&ltdc_out_dsi>;
> +					};
> +				};
> +
> +				port@1 {
> +					reg = <1>;
> +					dsi_out_panel: endpoint {
> +						remote-endpoint = <&dsi_in_panel>;
> +					};
> +				};
> +
> +			};
> +
> +			panel-dsi@0 {
> +				reg = <0>; /* dsi virtual channel (0..3) */
> +				compatible = ...;
> +				enable-gpios = ...;
> +
> +				port {
> +					dsi_in_panel: endpoint {
> +						remote-endpoint = <&dsi_out_panel>;
> +					};
> +				};
> +
> +			};
> +
> +		};
> +
> +	};
> +};
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 4/5] dt-bindings: display: Add STM32 DSI host driver

[Rob Herring]

On Fri, May 19, 2017 at 05:20:17PM +0200, Philippe CORNU wrote:
> This patch adds documentation of device tree bindings for the STM32
> DSI host driver based on the Synopsys DW MIPI DSI driver from Rockchip.
> 
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>  .../devicetree/bindings/display/st,stm32-ltdc.txt  | 102 ++++++++++++++++++++-
>  1 file changed, 100 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> index 8e14769..18a57a2 100644
> --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
> @@ -1,7 +1,6 @@
>  * STMicroelectronics STM32 lcd-tft display controller
>  
>  - ltdc: lcd-tft display controller host
> -  must be a sub-node of st-display-subsystem
>    Required properties:
>    - compatible: "st,stm32-ltdc"
>    - reg: Physical base address of the IP registers and length of memory mapped region.
> @@ -13,8 +12,37 @@
>    Required nodes:
>      - Video port for RGB output.
>  
> -Example:
> +* STMicroelectronics STM32 specific extensions to Synopsys DesignWare MIPI DSI
>  
> +Required properties:
> +- #address-cells: Should be <1>.
> +- #size-cells: Should be <0>.
> +- compatible: "st,stm32-dsi".
> +- reg: Memory mapped base address and length of the DWC MIPI DSI registers.
> +- clocks: References to all the clocks specified in the clock-names property
> +  as specified in [1].
> +- clock-names: The DWC MIPI DSI host uses the following clocks.
> +  - "pclk" is the peripheral clock for either AHB and APB (mandatory).
> +  - "ref" is the pll reference clock (mandatory).

Just "See [5]" is enough description here.

> +- resets: References to all the resets specified in the reset-names property
> +  as specified in [2]. (optional)
> +- reset-names: string reset name, must be "apb" if used. (optional)
> +- ports: The connectivity of the DWC MIPI DSI host controller
> +  with the rest of the system is expressed in using ports as specified in the
> +  device graph bindings in [2].
> +  - port at 0 is the dsi input, connected to the ltdc output port.
> +  - port at 1 is the dsi output, connected to the dsi panel or bridge.
> +
> +Note: You can find more documentation related to the Synopsys DesignWare MIPI
> +DSI host controller in [5].
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/reset/reset.txt
> +[3] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[4] Documentation/devicetree/bindings/graph.txt
> +[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> +
> +Example 1: RGB panel
>  / {
>  	...
>  	soc {
> @@ -34,3 +62,73 @@ Example:
>  		};
>  	};
>  };
> +
> +Example 2: DSI panel
> +
> +/ {
> +	...
> +	soc {
> +	...
> +		ltdc: display-controller at 40016800 {
> +			compatible = "st,stm32-ltdc";
> +			reg = <0x40016800 0x200>;
> +			interrupts = <88>, <89>;
> +			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
> +			clocks = <&rcc 1 CLK_LCD>;
> +			clock-names = "lcd";
> +
> +			port {
> +				ltdc_out_dsi: endpoint {
> +					remote-endpoint = <&dsi_in>;
> +				};
> +			};
> +		};
> +
> +
> +		dsi: dsi at 40016C00 {

nit: lowercase hex

> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "st,stm32-dsi";
> +			reg = <0x40016C00 0x800>;

here too.

> +			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
> +			clock-names = "ref", "pclk";
> +			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
> +			reset-names = "apb";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					dsi_in: endpoint {
> +						remote-endpoint = <&ltdc_out_dsi>;
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					dsi_out_panel: endpoint {
> +						remote-endpoint = <&dsi_in_panel>;
> +					};
> +				};
> +
> +			};
> +
> +			panel-dsi at 0 {
> +				reg = <0>; /* dsi virtual channel (0..3) */
> +				compatible = ...;
> +				enable-gpios = ...;
> +
> +				port {
> +					dsi_in_panel: endpoint {
> +						remote-endpoint = <&dsi_out_panel>;
> +					};
> +				};
> +
> +			};
> +
> +		};
> +
> +	};
> +};
> -- 
> 1.9.1
> 

Re: [PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Archit Taneja]

Hi Philippe,

Thanks a lot for creating a bridge driver for this.

Copying some Hisilicon and Rockchip folks so that they can consider adapting to this.

Some comments below.

On 05/19/2017 08:50 PM, Philippe CORNU wrote:
> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>
> Signed-off-by: Philippe CORNU <philippe.cornu-qxv4g6HH51o@public.gmane.org>
> ---
>  drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>  drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>  drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>  3 files changed, 1035 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
> index 40d2827..d7fbdff 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>  	help
>  	  Support the I2S Audio interface which is part of the Synopsys
>  	  Designware HDMI block.
> +
> +config DRM_DW_MIPI_DSI
> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
> +	select DRM_KMS_HELPER
> +	select DRM_MIPI_DSI
> +	select DRM_PANEL
> +	help
> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
> +	  controller bridge.
> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
> index 17aa7a6..5f57d36 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
> @@ -3,3 +3,5 @@
>  obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>  obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>  obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
> +
> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> new file mode 100644
> index 0000000..041f564
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -0,0 +1,1024 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Modified by Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>
> + * This generic Synopsys Designware MIPI DSI host driver is based on the
> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <video/mipi_display.h>
> +
> +#define DSI_VERSION			0x00
> +#define DSI_PWR_UP			0x04
> +#define RESET				0
> +#define POWERUP				BIT(0)
> +
> +#define DSI_CLKMGR_CFG			0x08
> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
> +
> +#define DSI_DPI_VCID			0x0c
> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
> +
> +#define DSI_DPI_COLOR_CODING		0x10
> +#define EN18_LOOSELY			BIT(8)
> +#define DPI_COLOR_CODING_16BIT_1	0x0
> +#define DPI_COLOR_CODING_16BIT_2	0x1
> +#define DPI_COLOR_CODING_16BIT_3	0x2
> +#define DPI_COLOR_CODING_18BIT_1	0x3
> +#define DPI_COLOR_CODING_18BIT_2	0x4
> +#define DPI_COLOR_CODING_24BIT		0x5
> +
> +#define DSI_DPI_CFG_POL			0x14
> +#define COLORM_ACTIVE_LOW		BIT(4)
> +#define SHUTD_ACTIVE_LOW		BIT(3)
> +#define HSYNC_ACTIVE_LOW		BIT(2)
> +#define VSYNC_ACTIVE_LOW		BIT(1)
> +#define DATAEN_ACTIVE_LOW		BIT(0)
> +
> +#define DSI_DPI_LP_CMD_TIM		0x18
> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
> +
> +#define DSI_DBI_CFG			0x20
> +#define DSI_DBI_CMDSIZE			0x28
> +
> +#define DSI_PCKHDL_CFG			0x2c
> +#define EN_CRC_RX			BIT(4)
> +#define EN_ECC_RX			BIT(3)
> +#define EN_BTA				BIT(2)
> +#define EN_EOTP_RX			BIT(1)
> +#define EN_EOTP_TX			BIT(0)
> +
> +#define DSI_MODE_CFG			0x34
> +#define ENABLE_VIDEO_MODE		0
> +#define ENABLE_CMD_MODE			BIT(0)
> +
> +#define DSI_VID_MODE_CFG		0x38
> +#define FRAME_BTA_ACK			BIT(14)
> +#define ENABLE_LOW_POWER		(0x3f << 8)
> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
> +#define VID_MODE_TYPE_BURST			0x2
> +#define VID_MODE_TYPE_MASK			0x3
> +
> +#define DSI_VID_PKT_SIZE		0x3c
> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
> +#define VID_PKT_MAX_SIZE		0x3fff
> +
> +#define DSI_VID_HSA_TIME		0x48
> +#define DSI_VID_HBP_TIME		0x4c
> +#define DSI_VID_HLINE_TIME		0x50
> +#define DSI_VID_VSA_LINES		0x54
> +#define DSI_VID_VBP_LINES		0x58
> +#define DSI_VID_VFP_LINES		0x5c
> +#define DSI_VID_VACTIVE_LINES		0x60
> +#define DSI_CMD_MODE_CFG		0x68
> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
> +#define DCS_LW_TX_LP			BIT(19)
> +#define DCS_SR_0P_TX_LP			BIT(18)
> +#define DCS_SW_1P_TX_LP			BIT(17)
> +#define DCS_SW_0P_TX_LP			BIT(16)
> +#define GEN_LW_TX_LP			BIT(14)
> +#define GEN_SR_2P_TX_LP			BIT(13)
> +#define GEN_SR_1P_TX_LP			BIT(12)
> +#define GEN_SR_0P_TX_LP			BIT(11)
> +#define GEN_SW_2P_TX_LP			BIT(10)
> +#define GEN_SW_1P_TX_LP			BIT(9)
> +#define GEN_SW_0P_TX_LP			BIT(8)
> +#define EN_ACK_RQST			BIT(1)
> +#define EN_TEAR_FX			BIT(0)
> +
> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
> +					 DCS_LW_TX_LP | \
> +					 DCS_SR_0P_TX_LP | \
> +					 DCS_SW_1P_TX_LP | \
> +					 DCS_SW_0P_TX_LP | \
> +					 GEN_LW_TX_LP | \
> +					 GEN_SR_2P_TX_LP | \
> +					 GEN_SR_1P_TX_LP | \
> +					 GEN_SR_0P_TX_LP | \
> +					 GEN_SW_2P_TX_LP | \
> +					 GEN_SW_1P_TX_LP | \
> +					 GEN_SW_0P_TX_LP)
> +
> +#define DSI_GEN_HDR			0x6c
> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
> +#define GEN_HDATA_MASK			(0xffff << 8)
> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
> +#define GEN_HTYPE_MASK			0xff
> +
> +#define DSI_GEN_PLD_DATA		0x70
> +
> +#define DSI_CMD_PKT_STATUS		0x74
> +#define GEN_CMD_EMPTY			BIT(0)
> +#define GEN_CMD_FULL			BIT(1)
> +#define GEN_PLD_W_EMPTY			BIT(2)
> +#define GEN_PLD_W_FULL			BIT(3)
> +#define GEN_PLD_R_EMPTY			BIT(4)
> +#define GEN_PLD_R_FULL			BIT(5)
> +#define GEN_RD_CMD_BUSY			BIT(6)
> +
> +#define DSI_TO_CNT_CFG			0x78
> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
> +
> +#define DSI_BTA_TO_CNT			0x8c
> +#define DSI_LPCLK_CTRL			0x94
> +#define AUTO_CLKLANE_CTRL		BIT(1)
> +#define PHY_TXREQUESTCLKHS		BIT(0)
> +
> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
> +
> +#define DSI_PHY_TMR_CFG			0x9c
> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
> +
> +#define DSI_PHY_RSTZ			0xa0
> +#define PHY_DISFORCEPLL			0
> +#define PHY_ENFORCEPLL			BIT(3)
> +#define PHY_DISABLECLK			0
> +#define PHY_ENABLECLK			BIT(2)
> +#define PHY_RSTZ			0
> +#define PHY_UNRSTZ			BIT(1)
> +#define PHY_SHUTDOWNZ			0
> +#define PHY_UNSHUTDOWNZ			BIT(0)
> +
> +#define DSI_PHY_IF_CFG			0xa4
> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
> +
> +#define DSI_PHY_STATUS			0xb0
> +#define LOCK				BIT(0)
> +#define STOP_STATE_CLK_LANE		BIT(2)
> +
> +#define DSI_PHY_TST_CTRL0		0xb4
> +#define PHY_TESTCLK			BIT(1)
> +#define PHY_UNTESTCLK			0
> +#define PHY_TESTCLR			BIT(0)
> +#define PHY_UNTESTCLR			0
> +
> +#define DSI_PHY_TST_CTRL1		0xb8
> +#define PHY_TESTEN			BIT(16)
> +#define PHY_UNTESTEN			0
> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
> +
> +#define DSI_INT_ST0			0xbc
> +#define DSI_INT_ST1			0xc0
> +#define DSI_INT_MSK0			0xc4
> +#define DSI_INT_MSK1			0xc8
> +
> +#define PHY_STATUS_TIMEOUT_US		10000
> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
> +
> +struct dw_mipi_dsi {
> +	struct drm_bridge bridge;
> +	struct drm_connector connector;
> +	struct mipi_dsi_host dsi_host;
> +	struct drm_panel *panel;
> +	struct device *dev;
> +	void __iomem *base;
> +
> +	struct clk *pllref_clk;
> +	struct clk *pclk;
> +
> +	int dpms_mode;
> +	unsigned int lane_mbps; /* per lane */
> +	u32 channel;
> +	u32 lanes;
> +	u32 format;
> +	unsigned long mode_flags;
> +
> +	const struct dw_mipi_dsi_plat_data *plat_data;
> +};
> +
> +enum dw_mipi_dsi_mode {
> +	DW_MIPI_DSI_CMD_MODE,
> +	DW_MIPI_DSI_VID_MODE,
> +};

This seems a bit unnecessary, we already have this info in the DSI device's
mode_flags field.

> +
> +/*
> + * The controller should generate 2 frames before
> + * preparing the peripheral.
> + */
> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
> +{
> +	int refresh, two_frames;
> +
> +	refresh = drm_mode_vrefresh(mode);
> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> +	msleep(two_frames);
> +}
> +
> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
> +{
> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
> +}
> +
> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
> +{
> +	return container_of(con, struct dw_mipi_dsi, connector);
> +}
> +
> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
> +}
> +
> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> +{
> +	return readl_relaxed(dsi->base + reg);
> +}
> +
> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
> +			device->lanes);
> +		return -EINVAL;
> +	}
> +
> +	dsi->lanes = device->lanes;
> +	dsi->channel = device->channel;
> +	dsi->format = device->format;
> +	dsi->mode_flags = device->mode_flags;
> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
> +	if (dsi->panel)
> +		return drm_panel_attach(dsi->panel, &dsi->connector);
> +
> +	return -EINVAL;
> +}
> +
> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	drm_panel_detach(dsi->panel);
> +
> +	return 0;
> +}
> +
> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> +				   const struct mipi_dsi_msg *msg)
> +{
> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> +	u32 val = 0;
> +
> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> +		val |= EN_ACK_RQST;
> +	if (lpm)
> +		val |= CMD_MODE_ALL_LP;
> +
> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> +
> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */

Will this break rockchip driver if they adapt to it?

If so, can you make this part of dw_mipi_dsi_plat_data, and mention it as
a quirk for STM?

> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +
> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> +}
> +
> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
> +{
> +	int ret;
> +	u32 val, mask;
> +
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, !(val & GEN_CMD_FULL), 1000,
> +				 CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
> +		return ret;
> +	}
> +
> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
> +
> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, (val & mask) == mask,
> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to write command FIFO\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> +				       const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	u16 data = 0;
> +	u32 val;
> +
> +	if (msg->tx_len > 0)
> +		data |= tx_buf[0];
> +	if (msg->tx_len > 1)
> +		data |= tx_buf[1] << 8;
> +
> +	if (msg->tx_len > 2) {
> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> +}
> +
> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> +				      const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> +	u32 remainder;
> +	u32 val;
> +
> +	if (msg->tx_len < 3) {
> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
> +		if (len < pld_data_bytes) {
> +			remainder = 0;
> +			memcpy(&remainder, tx_buf, len);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			len = 0;
> +		} else {
> +			memcpy(&remainder, tx_buf, pld_data_bytes);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			tx_buf += pld_data_bytes;
> +			len -= pld_data_bytes;
> +		}
> +
> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +					 val, !(val & GEN_PLD_W_FULL), 1000,
> +					 CMD_PKT_STATUS_TIMEOUT_US);
> +		if (ret < 0) {
> +			dev_err(dsi->dev,
> +				"failed to get available write payload FIFO\n");
> +			return ret;
> +		}
> +	}
> +
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
> +}
> +
> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
> +					 const struct mipi_dsi_msg *msg)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +	int ret;
> +
> +	/*
> +	 * todo dw drv improvements

could you write the TODOs in caps so that we don't miss them?

> +	 * use mipi_dsi_create_packet() instead of all following
> +	 * functions and code (no switch cases, no
> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
> +	 * and use packet.header...

Is there something missing in the mipi_dsi helpers to do this now? Or we're
just leaving this for later?

> +	 */
> +	dw_mipi_message_config(dsi, msg);
> +
> +	switch (msg->type) {
> +	case MIPI_DSI_DCS_SHORT_WRITE:
> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
> +		break;
> +	case MIPI_DSI_DCS_LONG_WRITE:
> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
> +		break;
> +	default:
> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
> +			msg->type);
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
> +	.attach = dw_mipi_dsi_host_attach,
> +	.detach = dw_mipi_dsi_host_detach,
> +	.transfer = dw_mipi_dsi_host_transfer,
> +};
> +
> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	u32 val;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * enabling low power is panel-dependent, we should use the
> +	 * panel configuration here...
> +	 */
> +	val = ENABLE_LOW_POWER;
> +
> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> +		val |= VID_MODE_TYPE_BURST;
> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
> +	else
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
> +
> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
> +}
> +
> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> +				 enum dw_mipi_dsi_mode mode)
> +{
> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	} else {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> +		dw_mipi_dsi_video_mode_config(dsi);
> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	}
> +}
> +
> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
> +}
> +
> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * The maximum permitted escape clock is 20MHz and it is derived from
> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
> +	 *
> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
> +	 * which is:
> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
> +	 */
> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
> +
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
> +	/*
> +	 * todo dw drv improvements
> +	 * timeout clock division should be computed with the
> +	 * high speed transmission counter timeout and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
> +}
> +
> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> +				   struct drm_display_mode *mode)
> +{
> +	u32 val = 0, color = 0;
> +
> +	switch (dsi->format) {
> +	case MIPI_DSI_FMT_RGB888:
> +		color = DPI_COLOR_CODING_24BIT;
> +		break;
> +	case MIPI_DSI_FMT_RGB666:
> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
> +		break;
> +	case MIPI_DSI_FMT_RGB666_PACKED:
> +		color = DPI_COLOR_CODING_18BIT_1;
> +		break;
> +	case MIPI_DSI_FMT_RGB565:
> +		color = DPI_COLOR_CODING_16BIT_1;
> +		break;
> +	}
> +
> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +		val |= VSYNC_ACTIVE_LOW;
> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +		val |= HSYNC_ACTIVE_LOW;
> +
> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
> +	/*
> +	 * todo dw drv improvements
> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
> +	 * should be computed according to byte lane, lane number and only
> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
> +	 */
> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
> +		  | INVACT_LPCMD_TIME(4));
> +}
> +
> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
> +}
> +
> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
> +					    struct drm_display_mode *mode)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * only burst mode is supported here. For non-burst video modes,
> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
> +	 */
> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
> +}
> +
> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * compute high speed transmission counter timeout according
> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
> +	/*
> +	 * todo dw drv improvements
> +	 * the Bus-Turn-Around Timeout Counter should be computed
> +	 * according to byte lane...
> +	 */
> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +}
> +
> +/* Get lane byte clock cycles. */
> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
> +					   struct drm_display_mode *mode,
> +					   u32 hcomponent)
> +{
> +	u32 frac, lbcc;
> +
> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
> +
> +	frac = lbcc % mode->clock;
> +	lbcc = lbcc / mode->clock;
> +	if (frac)
> +		lbcc++;
> +
> +	return lbcc;
> +}
> +
> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
> +					  struct drm_display_mode *mode)
> +{
> +	u32 htotal, hsa, hbp, lbcc;
> +
> +	htotal = mode->htotal;
> +	hsa = mode->hsync_end - mode->hsync_start;
> +	hbp = mode->htotal - mode->hsync_end;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * computations below may be improved...
> +	 */
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
> +}
> +
> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
> +					       struct drm_display_mode *mode)
> +{
> +	u32 vactive, vsa, vfp, vbp;
> +
> +	vactive = mode->vdisplay;
> +	vsa = mode->vsync_end - mode->vsync_start;
> +	vfp = mode->vsync_start - mode->vdisplay;
> +	vbp = mode->vtotal - mode->vsync_end;
> +
> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
> +}
> +
> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * data & clock lane timers should be computed according to panel
> +	 * blankings and to the automatic clock lane control mode...
> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
> +	 */
> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
> +
> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
> +		  | PHY_CLKLP2HS_TIME(0x40));
> +}
> +
> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * stop wait time should be the maximum between host dsi
> +	 * and panel stop wait times
> +	 */
> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
> +		  N_LANES(dsi->lanes));
> +}
> +
> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_read(dsi, DSI_INT_ST0);
> +	dsi_read(dsi, DSI_INT_ST1);
> +	dsi_write(dsi, DSI_INT_MSK0, 0);
> +	dsi_write(dsi, DSI_INT_MSK1, 0);
> +}
> +
> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +
> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	drm_panel_disable(dsi->panel);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	drm_panel_unprepare(dsi->panel);
> +
> +	dw_mipi_dsi_disable(dsi);
> +	pm_runtime_put(dsi->dev);
> +	clk_disable(dsi->pclk);
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +}
> +
> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_encoder *encoder = bridge->encoder;
> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
> +	void *priv_data = dsi->plat_data->priv_data;
> +	int ret;
> +
> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
> +
> +	pm_runtime_get_sync(dsi->dev);
> +	dw_mipi_dsi_init(dsi);
> +	dw_mipi_dsi_dpi_config(dsi, mode);
> +	dw_mipi_dsi_packet_handler_config(dsi);
> +	dw_mipi_dsi_video_mode_config(dsi);
> +	dw_mipi_dsi_video_packet_config(dsi, mode);
> +	dw_mipi_dsi_command_mode_config(dsi);
> +	dw_mipi_dsi_line_timer_config(dsi, mode);
> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
> +	dw_mipi_dsi_dphy_timing_config(dsi);
> +	dw_mipi_dsi_dphy_interface_config(dsi);
> +	dw_mipi_dsi_clear_err(dsi);
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * following command is inside dw_mipi_dsi_phy_init()

You mean in the dw_mipi_dsi_phy_init() implementation of the rockchip
driver?

The rockchip driver also calls:

	/* Start by clearing PHY state */
	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);

These registers also look like a part of the DW DSI block.

Also, the rockhip driver does something to configure grf_clks.
Can you mention a comment that they need to add a pdata quirk
here.

> +	 * but this function is also required here. We way move it in the
s/way/may
> +	 * phy but here we are using dsi regs...
> +	 * maybe add the waiting loop here too...
> +	 */
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> +
> +	ret = phy_ops->init(priv_data);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
> +
> +	dw_mipi_dsi_wait_for_two_frames(mode);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	if (drm_panel_prepare(dsi->panel))
> +		dev_err(dsi->dev, "failed to prepare panel\n");
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +	drm_panel_enable(dsi->panel);
> +
> +	clk_disable(dsi->pclk);
> +
> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
> +}
> +
> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +
> +	return drm_panel_get_modes(dsi->panel);
> +}
> +
> +static enum drm_mode_status
> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
> +		       struct drm_display_mode *mode)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
> +	enum drm_mode_status mode_status = MODE_OK;
> +
> +	if (pdata->mode_valid)
> +		mode_status = pdata->mode_valid(pdata->priv_data,
> +						connector, mode);
> +
> +	return mode_status;
> +}
> +
> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
> +	.get_modes = dw_mipi_dsi_connector_get_modes,
> +	.mode_valid = dw_mipi_dsi_mode_valid,
> +};
> +
> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_connector *connector = &dsi->connector;
> +
> +	if (!bridge->encoder) {
> +		DRM_ERROR("Parent encoder object not found\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Set the encoder type as caller does not know it */
> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
> +
> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_helper_add(connector,
> +				 &dw_mipi_dsi_connector_helper_funcs);
> +
> +	drm_connector_init(bridge->dev, connector,
> +			   &dw_mipi_dsi_atomic_connector_funcs,
> +			   DRM_MODE_CONNECTOR_DSI);
> +
> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
> +
> +	return 0;
> +}
> +
> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
> +	.enable = dw_mipi_dsi_bridge_enable,
> +	.disable = dw_mipi_dsi_bridge_disable,
> +	.attach = dw_mipi_dsi_bridge_attach,
> +};
> +
> +static struct dw_mipi_dsi *
> +__dw_mipi_dsi_probe(struct platform_device *pdev,
> +		    const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct reset_control *apb_rst;
> +	struct dw_mipi_dsi *dsi;
> +	struct resource *res;
> +	int ret;
> +
> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return ERR_PTR(-ENOMEM);
> +
> +	dsi->dev = dev;
> +	dsi->plat_data = plat_data;
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +
> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
> +		DRM_ERROR("Phy not properly configured\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	if (!plat_data->base) {
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +		if (!res)
> +			return ERR_PTR(-ENODEV);
> +
> +		dsi->base = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(dsi->base))
> +			return ERR_PTR(-ENODEV);
> +
> +	} else {
> +		dsi->base = plat_data->base;
> +	}
> +
> +	dsi->pllref_clk = devm_clk_get(dev, "ref");

The hisil implementation doesn't seem to have a pllref_clk. Can you make
this either optional as you've done for apb_rst, or make it a part of pdata?

Thanks,
Archit

> +	if (IS_ERR(dsi->pllref_clk)) {
> +		ret = PTR_ERR(dsi->pllref_clk);
> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	dsi->pclk = devm_clk_get(dev, "pclk");
> +	if (IS_ERR(dsi->pclk)) {
> +		ret = PTR_ERR(dsi->pclk);
> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	/*
> +	 * Note that the reset was not defined in the initial device tree, so
> +	 * we have to be prepared for it not being found.
> +	 */
> +	apb_rst = devm_reset_control_get(dev, "apb");
> +	if (IS_ERR(apb_rst)) {
> +		ret = PTR_ERR(apb_rst);
> +		if (ret == -ENOENT) {
> +			apb_rst = NULL;
> +		} else {
> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
> +			return ERR_PTR(ret);
> +		}
> +	}
> +
> +	if (apb_rst) {
> +		ret = clk_prepare_enable(dsi->pclk);
> +		if (ret) {
> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
> +			return ERR_PTR(ret);
> +		}
> +
> +		reset_control_assert(apb_rst);
> +		usleep_range(10, 20);
> +		reset_control_deassert(apb_rst);
> +
> +		clk_disable(dsi->pclk);
> +	}
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		return ERR_PTR(ret);
> +	}
> +
> +	pm_runtime_enable(dev);
> +
> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> +	dsi->dsi_host.dev = dev;
> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
> +	if (ret) {
> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> +		goto err_cleanup;
> +	}
> +
> +	dsi->bridge.driver_private = dsi;
> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
> +#ifdef CONFIG_OF
> +	dsi->bridge.of_node = pdev->dev.of_node;
> +#endif
> +
> +	clk_enable(dsi->pclk);
> +
> +	dev_set_drvdata(dev, dsi);
> +
> +	return dsi;
> +
> +err_cleanup:
> +	clk_disable_unprepare(dsi->pllref_clk);
> +
> +	return ERR_PTR(ret);
> +}
> +
> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
> +{
> +	pm_runtime_disable(dsi->dev);
> +	clk_disable_unprepare(dsi->pllref_clk);
> +}
> +
> +/*
> + * Probe/remove API, used from platforms based on the DRM bridge API.
> + */
> +int dw_mipi_dsi_probe(struct platform_device *pdev,
> +		      const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_add(&dsi->bridge);
> +	if (ret < 0) {
> +		__dw_mipi_dsi_remove(dsi);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
> +
> +void dw_mipi_dsi_remove(struct platform_device *pdev)
> +{
> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
> +
> +	mipi_dsi_host_unregister(&dsi->dsi_host);
> +	drm_bridge_remove(&dsi->bridge);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
> +
> +/*
> + * Bind/unbind API, used from platforms based on the component framework.
> + */
> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
> +		     const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
> +	if (ret) {
> +		dw_mipi_dsi_remove(pdev);
> +		DRM_ERROR("Failed to initialize bridge with drm\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
> +
> +void dw_mipi_dsi_unbind(struct device *dev)
> +{
> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
> +
> +MODULE_AUTHOR("Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu-qxv4g6HH51o@public.gmane.org>");
> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:dw-mipi-dsi");
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Archit Taneja]

Hi Philippe,

Thanks a lot for creating a bridge driver for this.

Copying some Hisilicon and Rockchip folks so that they can consider adapting to this.

Some comments below.

On 05/19/2017 08:50 PM, Philippe CORNU wrote:
> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>
> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>  drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>  drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>  3 files changed, 1035 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
> index 40d2827..d7fbdff 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>  	help
>  	  Support the I2S Audio interface which is part of the Synopsys
>  	  Designware HDMI block.
> +
> +config DRM_DW_MIPI_DSI
> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
> +	select DRM_KMS_HELPER
> +	select DRM_MIPI_DSI
> +	select DRM_PANEL
> +	help
> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
> +	  controller bridge.
> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
> index 17aa7a6..5f57d36 100644
> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
> @@ -3,3 +3,5 @@
>  obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>  obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>  obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
> +
> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> new file mode 100644
> index 0000000..041f564
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -0,0 +1,1024 @@
> +/*
> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Modified by Philippe Cornu <philippe.cornu@st.com>
> + * This generic Synopsys Designware MIPI DSI host driver is based on the
> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/bridge/dw_mipi_dsi.h>
> +#include <video/mipi_display.h>
> +
> +#define DSI_VERSION			0x00
> +#define DSI_PWR_UP			0x04
> +#define RESET				0
> +#define POWERUP				BIT(0)
> +
> +#define DSI_CLKMGR_CFG			0x08
> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
> +
> +#define DSI_DPI_VCID			0x0c
> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
> +
> +#define DSI_DPI_COLOR_CODING		0x10
> +#define EN18_LOOSELY			BIT(8)
> +#define DPI_COLOR_CODING_16BIT_1	0x0
> +#define DPI_COLOR_CODING_16BIT_2	0x1
> +#define DPI_COLOR_CODING_16BIT_3	0x2
> +#define DPI_COLOR_CODING_18BIT_1	0x3
> +#define DPI_COLOR_CODING_18BIT_2	0x4
> +#define DPI_COLOR_CODING_24BIT		0x5
> +
> +#define DSI_DPI_CFG_POL			0x14
> +#define COLORM_ACTIVE_LOW		BIT(4)
> +#define SHUTD_ACTIVE_LOW		BIT(3)
> +#define HSYNC_ACTIVE_LOW		BIT(2)
> +#define VSYNC_ACTIVE_LOW		BIT(1)
> +#define DATAEN_ACTIVE_LOW		BIT(0)
> +
> +#define DSI_DPI_LP_CMD_TIM		0x18
> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
> +
> +#define DSI_DBI_CFG			0x20
> +#define DSI_DBI_CMDSIZE			0x28
> +
> +#define DSI_PCKHDL_CFG			0x2c
> +#define EN_CRC_RX			BIT(4)
> +#define EN_ECC_RX			BIT(3)
> +#define EN_BTA				BIT(2)
> +#define EN_EOTP_RX			BIT(1)
> +#define EN_EOTP_TX			BIT(0)
> +
> +#define DSI_MODE_CFG			0x34
> +#define ENABLE_VIDEO_MODE		0
> +#define ENABLE_CMD_MODE			BIT(0)
> +
> +#define DSI_VID_MODE_CFG		0x38
> +#define FRAME_BTA_ACK			BIT(14)
> +#define ENABLE_LOW_POWER		(0x3f << 8)
> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
> +#define VID_MODE_TYPE_BURST			0x2
> +#define VID_MODE_TYPE_MASK			0x3
> +
> +#define DSI_VID_PKT_SIZE		0x3c
> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
> +#define VID_PKT_MAX_SIZE		0x3fff
> +
> +#define DSI_VID_HSA_TIME		0x48
> +#define DSI_VID_HBP_TIME		0x4c
> +#define DSI_VID_HLINE_TIME		0x50
> +#define DSI_VID_VSA_LINES		0x54
> +#define DSI_VID_VBP_LINES		0x58
> +#define DSI_VID_VFP_LINES		0x5c
> +#define DSI_VID_VACTIVE_LINES		0x60
> +#define DSI_CMD_MODE_CFG		0x68
> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
> +#define DCS_LW_TX_LP			BIT(19)
> +#define DCS_SR_0P_TX_LP			BIT(18)
> +#define DCS_SW_1P_TX_LP			BIT(17)
> +#define DCS_SW_0P_TX_LP			BIT(16)
> +#define GEN_LW_TX_LP			BIT(14)
> +#define GEN_SR_2P_TX_LP			BIT(13)
> +#define GEN_SR_1P_TX_LP			BIT(12)
> +#define GEN_SR_0P_TX_LP			BIT(11)
> +#define GEN_SW_2P_TX_LP			BIT(10)
> +#define GEN_SW_1P_TX_LP			BIT(9)
> +#define GEN_SW_0P_TX_LP			BIT(8)
> +#define EN_ACK_RQST			BIT(1)
> +#define EN_TEAR_FX			BIT(0)
> +
> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
> +					 DCS_LW_TX_LP | \
> +					 DCS_SR_0P_TX_LP | \
> +					 DCS_SW_1P_TX_LP | \
> +					 DCS_SW_0P_TX_LP | \
> +					 GEN_LW_TX_LP | \
> +					 GEN_SR_2P_TX_LP | \
> +					 GEN_SR_1P_TX_LP | \
> +					 GEN_SR_0P_TX_LP | \
> +					 GEN_SW_2P_TX_LP | \
> +					 GEN_SW_1P_TX_LP | \
> +					 GEN_SW_0P_TX_LP)
> +
> +#define DSI_GEN_HDR			0x6c
> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
> +#define GEN_HDATA_MASK			(0xffff << 8)
> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
> +#define GEN_HTYPE_MASK			0xff
> +
> +#define DSI_GEN_PLD_DATA		0x70
> +
> +#define DSI_CMD_PKT_STATUS		0x74
> +#define GEN_CMD_EMPTY			BIT(0)
> +#define GEN_CMD_FULL			BIT(1)
> +#define GEN_PLD_W_EMPTY			BIT(2)
> +#define GEN_PLD_W_FULL			BIT(3)
> +#define GEN_PLD_R_EMPTY			BIT(4)
> +#define GEN_PLD_R_FULL			BIT(5)
> +#define GEN_RD_CMD_BUSY			BIT(6)
> +
> +#define DSI_TO_CNT_CFG			0x78
> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
> +
> +#define DSI_BTA_TO_CNT			0x8c
> +#define DSI_LPCLK_CTRL			0x94
> +#define AUTO_CLKLANE_CTRL		BIT(1)
> +#define PHY_TXREQUESTCLKHS		BIT(0)
> +
> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
> +
> +#define DSI_PHY_TMR_CFG			0x9c
> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
> +
> +#define DSI_PHY_RSTZ			0xa0
> +#define PHY_DISFORCEPLL			0
> +#define PHY_ENFORCEPLL			BIT(3)
> +#define PHY_DISABLECLK			0
> +#define PHY_ENABLECLK			BIT(2)
> +#define PHY_RSTZ			0
> +#define PHY_UNRSTZ			BIT(1)
> +#define PHY_SHUTDOWNZ			0
> +#define PHY_UNSHUTDOWNZ			BIT(0)
> +
> +#define DSI_PHY_IF_CFG			0xa4
> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
> +
> +#define DSI_PHY_STATUS			0xb0
> +#define LOCK				BIT(0)
> +#define STOP_STATE_CLK_LANE		BIT(2)
> +
> +#define DSI_PHY_TST_CTRL0		0xb4
> +#define PHY_TESTCLK			BIT(1)
> +#define PHY_UNTESTCLK			0
> +#define PHY_TESTCLR			BIT(0)
> +#define PHY_UNTESTCLR			0
> +
> +#define DSI_PHY_TST_CTRL1		0xb8
> +#define PHY_TESTEN			BIT(16)
> +#define PHY_UNTESTEN			0
> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
> +
> +#define DSI_INT_ST0			0xbc
> +#define DSI_INT_ST1			0xc0
> +#define DSI_INT_MSK0			0xc4
> +#define DSI_INT_MSK1			0xc8
> +
> +#define PHY_STATUS_TIMEOUT_US		10000
> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
> +
> +struct dw_mipi_dsi {
> +	struct drm_bridge bridge;
> +	struct drm_connector connector;
> +	struct mipi_dsi_host dsi_host;
> +	struct drm_panel *panel;
> +	struct device *dev;
> +	void __iomem *base;
> +
> +	struct clk *pllref_clk;
> +	struct clk *pclk;
> +
> +	int dpms_mode;
> +	unsigned int lane_mbps; /* per lane */
> +	u32 channel;
> +	u32 lanes;
> +	u32 format;
> +	unsigned long mode_flags;
> +
> +	const struct dw_mipi_dsi_plat_data *plat_data;
> +};
> +
> +enum dw_mipi_dsi_mode {
> +	DW_MIPI_DSI_CMD_MODE,
> +	DW_MIPI_DSI_VID_MODE,
> +};

This seems a bit unnecessary, we already have this info in the DSI device's
mode_flags field.

> +
> +/*
> + * The controller should generate 2 frames before
> + * preparing the peripheral.
> + */
> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
> +{
> +	int refresh, two_frames;
> +
> +	refresh = drm_mode_vrefresh(mode);
> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
> +	msleep(two_frames);
> +}
> +
> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
> +{
> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
> +}
> +
> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
> +{
> +	return container_of(con, struct dw_mipi_dsi, connector);
> +}
> +
> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
> +}
> +
> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
> +{
> +	writel_relaxed(val, dsi->base + reg);
> +}
> +
> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
> +{
> +	return readl_relaxed(dsi->base + reg);
> +}
> +
> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
> +			device->lanes);
> +		return -EINVAL;
> +	}
> +
> +	dsi->lanes = device->lanes;
> +	dsi->channel = device->channel;
> +	dsi->format = device->format;
> +	dsi->mode_flags = device->mode_flags;
> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
> +	if (dsi->panel)
> +		return drm_panel_attach(dsi->panel, &dsi->connector);
> +
> +	return -EINVAL;
> +}
> +
> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
> +				   struct mipi_dsi_device *device)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +
> +	drm_panel_detach(dsi->panel);
> +
> +	return 0;
> +}
> +
> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
> +				   const struct mipi_dsi_msg *msg)
> +{
> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
> +	u32 val = 0;
> +
> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
> +		val |= EN_ACK_RQST;
> +	if (lpm)
> +		val |= CMD_MODE_ALL_LP;
> +
> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> +
> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */

Will this break rockchip driver if they adapt to it?

If so, can you make this part of dw_mipi_dsi_plat_data, and mention it as
a quirk for STM?

> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +
> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> +}
> +
> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
> +{
> +	int ret;
> +	u32 val, mask;
> +
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, !(val & GEN_CMD_FULL), 1000,
> +				 CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
> +		return ret;
> +	}
> +
> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
> +
> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +				 val, (val & mask) == mask,
> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
> +	if (ret < 0) {
> +		dev_err(dsi->dev, "failed to write command FIFO\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
> +				       const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	u16 data = 0;
> +	u32 val;
> +
> +	if (msg->tx_len > 0)
> +		data |= tx_buf[0];
> +	if (msg->tx_len > 1)
> +		data |= tx_buf[1] << 8;
> +
> +	if (msg->tx_len > 2) {
> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
> +}
> +
> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
> +				      const struct mipi_dsi_msg *msg)
> +{
> +	const u8 *tx_buf = msg->tx_buf;
> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
> +	u32 remainder;
> +	u32 val;
> +
> +	if (msg->tx_len < 3) {
> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
> +			msg->tx_len);
> +		return -EINVAL;
> +	}
> +
> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
> +		if (len < pld_data_bytes) {
> +			remainder = 0;
> +			memcpy(&remainder, tx_buf, len);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			len = 0;
> +		} else {
> +			memcpy(&remainder, tx_buf, pld_data_bytes);
> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
> +			tx_buf += pld_data_bytes;
> +			len -= pld_data_bytes;
> +		}
> +
> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
> +					 val, !(val & GEN_PLD_W_FULL), 1000,
> +					 CMD_PKT_STATUS_TIMEOUT_US);
> +		if (ret < 0) {
> +			dev_err(dsi->dev,
> +				"failed to get available write payload FIFO\n");
> +			return ret;
> +		}
> +	}
> +
> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
> +}
> +
> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
> +					 const struct mipi_dsi_msg *msg)
> +{
> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
> +	int ret;
> +
> +	/*
> +	 * todo dw drv improvements

could you write the TODOs in caps so that we don't miss them?

> +	 * use mipi_dsi_create_packet() instead of all following
> +	 * functions and code (no switch cases, no
> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
> +	 * and use packet.header...

Is there something missing in the mipi_dsi helpers to do this now? Or we're
just leaving this for later?

> +	 */
> +	dw_mipi_message_config(dsi, msg);
> +
> +	switch (msg->type) {
> +	case MIPI_DSI_DCS_SHORT_WRITE:
> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
> +		break;
> +	case MIPI_DSI_DCS_LONG_WRITE:
> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
> +		break;
> +	default:
> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
> +			msg->type);
> +		ret = -EINVAL;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
> +	.attach = dw_mipi_dsi_host_attach,
> +	.detach = dw_mipi_dsi_host_detach,
> +	.transfer = dw_mipi_dsi_host_transfer,
> +};
> +
> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	u32 val;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * enabling low power is panel-dependent, we should use the
> +	 * panel configuration here...
> +	 */
> +	val = ENABLE_LOW_POWER;
> +
> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
> +		val |= VID_MODE_TYPE_BURST;
> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
> +	else
> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
> +
> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
> +}
> +
> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
> +				 enum dw_mipi_dsi_mode mode)
> +{
> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	} else {
> +		dsi_write(dsi, DSI_PWR_UP, RESET);
> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
> +		dw_mipi_dsi_video_mode_config(dsi);
> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
> +	}
> +}
> +
> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
> +}
> +
> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * The maximum permitted escape clock is 20MHz and it is derived from
> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
> +	 *
> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
> +	 * which is:
> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
> +	 */
> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
> +
> +	dsi_write(dsi, DSI_PWR_UP, RESET);
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
> +	/*
> +	 * todo dw drv improvements
> +	 * timeout clock division should be computed with the
> +	 * high speed transmission counter timeout and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
> +}
> +
> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
> +				   struct drm_display_mode *mode)
> +{
> +	u32 val = 0, color = 0;
> +
> +	switch (dsi->format) {
> +	case MIPI_DSI_FMT_RGB888:
> +		color = DPI_COLOR_CODING_24BIT;
> +		break;
> +	case MIPI_DSI_FMT_RGB666:
> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
> +		break;
> +	case MIPI_DSI_FMT_RGB666_PACKED:
> +		color = DPI_COLOR_CODING_18BIT_1;
> +		break;
> +	case MIPI_DSI_FMT_RGB565:
> +		color = DPI_COLOR_CODING_16BIT_1;
> +		break;
> +	}
> +
> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> +		val |= VSYNC_ACTIVE_LOW;
> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> +		val |= HSYNC_ACTIVE_LOW;
> +
> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
> +	/*
> +	 * todo dw drv improvements
> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
> +	 * should be computed according to byte lane, lane number and only
> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
> +	 */
> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
> +		  | INVACT_LPCMD_TIME(4));
> +}
> +
> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
> +}
> +
> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
> +					    struct drm_display_mode *mode)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * only burst mode is supported here. For non-burst video modes,
> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
> +	 */
> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
> +}
> +
> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * compute high speed transmission counter timeout according
> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
> +	 */
> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
> +	/*
> +	 * todo dw drv improvements
> +	 * the Bus-Turn-Around Timeout Counter should be computed
> +	 * according to byte lane...
> +	 */
> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
> +}
> +
> +/* Get lane byte clock cycles. */
> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
> +					   struct drm_display_mode *mode,
> +					   u32 hcomponent)
> +{
> +	u32 frac, lbcc;
> +
> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
> +
> +	frac = lbcc % mode->clock;
> +	lbcc = lbcc / mode->clock;
> +	if (frac)
> +		lbcc++;
> +
> +	return lbcc;
> +}
> +
> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
> +					  struct drm_display_mode *mode)
> +{
> +	u32 htotal, hsa, hbp, lbcc;
> +
> +	htotal = mode->htotal;
> +	hsa = mode->hsync_end - mode->hsync_start;
> +	hbp = mode->htotal - mode->hsync_end;
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * computations below may be improved...
> +	 */
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
> +
> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
> +}
> +
> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
> +					       struct drm_display_mode *mode)
> +{
> +	u32 vactive, vsa, vfp, vbp;
> +
> +	vactive = mode->vdisplay;
> +	vsa = mode->vsync_end - mode->vsync_start;
> +	vfp = mode->vsync_start - mode->vdisplay;
> +	vbp = mode->vtotal - mode->vsync_end;
> +
> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
> +}
> +
> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * data & clock lane timers should be computed according to panel
> +	 * blankings and to the automatic clock lane control mode...
> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
> +	 */
> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
> +
> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
> +		  | PHY_CLKLP2HS_TIME(0x40));
> +}
> +
> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
> +{
> +	/*
> +	 * todo dw drv improvements
> +	 * stop wait time should be the maximum between host dsi
> +	 * and panel stop wait times
> +	 */
> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
> +		  N_LANES(dsi->lanes));
> +}
> +
> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
> +{
> +	dsi_read(dsi, DSI_INT_ST0);
> +	dsi_read(dsi, DSI_INT_ST1);
> +	dsi_write(dsi, DSI_INT_MSK0, 0);
> +	dsi_write(dsi, DSI_INT_MSK1, 0);
> +}
> +
> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +
> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	drm_panel_disable(dsi->panel);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	drm_panel_unprepare(dsi->panel);
> +
> +	dw_mipi_dsi_disable(dsi);
> +	pm_runtime_put(dsi->dev);
> +	clk_disable(dsi->pclk);
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +}
> +
> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_encoder *encoder = bridge->encoder;
> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
> +	void *priv_data = dsi->plat_data->priv_data;
> +	int ret;
> +
> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
> +		return;
> +
> +	if (clk_enable(dsi->pclk)) {
> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
> +		return;
> +	}
> +
> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
> +
> +	pm_runtime_get_sync(dsi->dev);
> +	dw_mipi_dsi_init(dsi);
> +	dw_mipi_dsi_dpi_config(dsi, mode);
> +	dw_mipi_dsi_packet_handler_config(dsi);
> +	dw_mipi_dsi_video_mode_config(dsi);
> +	dw_mipi_dsi_video_packet_config(dsi, mode);
> +	dw_mipi_dsi_command_mode_config(dsi);
> +	dw_mipi_dsi_line_timer_config(dsi, mode);
> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
> +	dw_mipi_dsi_dphy_timing_config(dsi);
> +	dw_mipi_dsi_dphy_interface_config(dsi);
> +	dw_mipi_dsi_clear_err(dsi);
> +
> +	/*
> +	 * todo dw drv improvements
> +	 * following command is inside dw_mipi_dsi_phy_init()

You mean in the dw_mipi_dsi_phy_init() implementation of the rockchip
driver?

The rockchip driver also calls:

	/* Start by clearing PHY state */
	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);

These registers also look like a part of the DW DSI block.

Also, the rockhip driver does something to configure grf_clks.
Can you mention a comment that they need to add a pdata quirk
here.

> +	 * but this function is also required here. We way move it in the
s/way/may
> +	 * phy but here we are using dsi regs...
> +	 * maybe add the waiting loop here too...
> +	 */
> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
> +
> +	ret = phy_ops->init(priv_data);
> +	if (ret)
> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
> +
> +	dw_mipi_dsi_wait_for_two_frames(mode);
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> +	if (drm_panel_prepare(dsi->panel))
> +		dev_err(dsi->dev, "failed to prepare panel\n");
> +
> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> +	drm_panel_enable(dsi->panel);
> +
> +	clk_disable(dsi->pclk);
> +
> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
> +}
> +
> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +
> +	return drm_panel_get_modes(dsi->panel);
> +}
> +
> +static enum drm_mode_status
> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
> +		       struct drm_display_mode *mode)
> +{
> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
> +	enum drm_mode_status mode_status = MODE_OK;
> +
> +	if (pdata->mode_valid)
> +		mode_status = pdata->mode_valid(pdata->priv_data,
> +						connector, mode);
> +
> +	return mode_status;
> +}
> +
> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
> +	.get_modes = dw_mipi_dsi_connector_get_modes,
> +	.mode_valid = dw_mipi_dsi_mode_valid,
> +};
> +
> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
> +{
> +	drm_connector_unregister(connector);
> +	drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
> +	.dpms = drm_atomic_helper_connector_dpms,
> +	.fill_modes = drm_helper_probe_single_connector_modes,
> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
> +	.reset = drm_atomic_helper_connector_reset,
> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
> +{
> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
> +	struct drm_connector *connector = &dsi->connector;
> +
> +	if (!bridge->encoder) {
> +		DRM_ERROR("Parent encoder object not found\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Set the encoder type as caller does not know it */
> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
> +
> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
> +
> +	drm_connector_helper_add(connector,
> +				 &dw_mipi_dsi_connector_helper_funcs);
> +
> +	drm_connector_init(bridge->dev, connector,
> +			   &dw_mipi_dsi_atomic_connector_funcs,
> +			   DRM_MODE_CONNECTOR_DSI);
> +
> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
> +
> +	return 0;
> +}
> +
> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
> +	.enable = dw_mipi_dsi_bridge_enable,
> +	.disable = dw_mipi_dsi_bridge_disable,
> +	.attach = dw_mipi_dsi_bridge_attach,
> +};
> +
> +static struct dw_mipi_dsi *
> +__dw_mipi_dsi_probe(struct platform_device *pdev,
> +		    const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct reset_control *apb_rst;
> +	struct dw_mipi_dsi *dsi;
> +	struct resource *res;
> +	int ret;
> +
> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
> +	if (!dsi)
> +		return ERR_PTR(-ENOMEM);
> +
> +	dsi->dev = dev;
> +	dsi->plat_data = plat_data;
> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
> +
> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
> +		DRM_ERROR("Phy not properly configured\n");
> +		return ERR_PTR(-ENODEV);
> +	}
> +
> +	if (!plat_data->base) {
> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +		if (!res)
> +			return ERR_PTR(-ENODEV);
> +
> +		dsi->base = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(dsi->base))
> +			return ERR_PTR(-ENODEV);
> +
> +	} else {
> +		dsi->base = plat_data->base;
> +	}
> +
> +	dsi->pllref_clk = devm_clk_get(dev, "ref");

The hisil implementation doesn't seem to have a pllref_clk. Can you make
this either optional as you've done for apb_rst, or make it a part of pdata?

Thanks,
Archit

> +	if (IS_ERR(dsi->pllref_clk)) {
> +		ret = PTR_ERR(dsi->pllref_clk);
> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	dsi->pclk = devm_clk_get(dev, "pclk");
> +	if (IS_ERR(dsi->pclk)) {
> +		ret = PTR_ERR(dsi->pclk);
> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
> +		return ERR_PTR(ret);
> +	}
> +
> +	/*
> +	 * Note that the reset was not defined in the initial device tree, so
> +	 * we have to be prepared for it not being found.
> +	 */
> +	apb_rst = devm_reset_control_get(dev, "apb");
> +	if (IS_ERR(apb_rst)) {
> +		ret = PTR_ERR(apb_rst);
> +		if (ret == -ENOENT) {
> +			apb_rst = NULL;
> +		} else {
> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
> +			return ERR_PTR(ret);
> +		}
> +	}
> +
> +	if (apb_rst) {
> +		ret = clk_prepare_enable(dsi->pclk);
> +		if (ret) {
> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
> +			return ERR_PTR(ret);
> +		}
> +
> +		reset_control_assert(apb_rst);
> +		usleep_range(10, 20);
> +		reset_control_deassert(apb_rst);
> +
> +		clk_disable(dsi->pclk);
> +	}
> +
> +	ret = clk_prepare_enable(dsi->pllref_clk);
> +	if (ret) {
> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
> +		return ERR_PTR(ret);
> +	}
> +
> +	pm_runtime_enable(dev);
> +
> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
> +	dsi->dsi_host.dev = dev;
> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
> +	if (ret) {
> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
> +		goto err_cleanup;
> +	}
> +
> +	dsi->bridge.driver_private = dsi;
> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
> +#ifdef CONFIG_OF
> +	dsi->bridge.of_node = pdev->dev.of_node;
> +#endif
> +
> +	clk_enable(dsi->pclk);
> +
> +	dev_set_drvdata(dev, dsi);
> +
> +	return dsi;
> +
> +err_cleanup:
> +	clk_disable_unprepare(dsi->pllref_clk);
> +
> +	return ERR_PTR(ret);
> +}
> +
> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
> +{
> +	pm_runtime_disable(dsi->dev);
> +	clk_disable_unprepare(dsi->pllref_clk);
> +}
> +
> +/*
> + * Probe/remove API, used from platforms based on the DRM bridge API.
> + */
> +int dw_mipi_dsi_probe(struct platform_device *pdev,
> +		      const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_add(&dsi->bridge);
> +	if (ret < 0) {
> +		__dw_mipi_dsi_remove(dsi);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
> +
> +void dw_mipi_dsi_remove(struct platform_device *pdev)
> +{
> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
> +
> +	mipi_dsi_host_unregister(&dsi->dsi_host);
> +	drm_bridge_remove(&dsi->bridge);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
> +
> +/*
> + * Bind/unbind API, used from platforms based on the component framework.
> + */
> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
> +		     const struct dw_mipi_dsi_plat_data *plat_data)
> +{
> +	struct dw_mipi_dsi *dsi;
> +	int ret;
> +
> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
> +	if (IS_ERR(dsi))
> +		return PTR_ERR(dsi);
> +
> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
> +	if (ret) {
> +		dw_mipi_dsi_remove(pdev);
> +		DRM_ERROR("Failed to initialize bridge with drm\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
> +
> +void dw_mipi_dsi_unbind(struct device *dev)
> +{
> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
> +
> +	__dw_mipi_dsi_remove(dsi);
> +}
> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
> +
> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:dw-mipi-dsi");
>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Philippe CORNU]

On 05/25/2017 01:23 PM, Archit Taneja wrote:
> Hi Philippe,
> 
> Thanks a lot for creating a bridge driver for this.
> 
> Copying some Hisilicon and Rockchip folks so that they can consider adapting to this.
> 
> Some comments below.
Hi Archit,
and many thanks for your great comments.

> 
> On 05/19/2017 08:50 PM, Philippe CORNU wrote:
>> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
>> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>>
>> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
>> ---
>>   drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>>   drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>>   drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>>   3 files changed, 1035 insertions(+)
>>   create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> index 40d2827..d7fbdff 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>>   	help
>>   	  Support the I2S Audio interface which is part of the Synopsys
>>   	  Designware HDMI block.
>> +
>> +config DRM_DW_MIPI_DSI
>> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
>> +	select DRM_KMS_HELPER
>> +	select DRM_MIPI_DSI
>> +	select DRM_PANEL
>> +	help
>> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
>> +	  controller bridge.
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
>> index 17aa7a6..5f57d36 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
>> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
>> @@ -3,3 +3,5 @@
>>   obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>>   obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>>   obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
>> +
>> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> new file mode 100644
>> index 0000000..041f564
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> @@ -0,0 +1,1024 @@
>> +/*
>> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * Modified by Philippe Cornu <philippe.cornu@st.com>
>> + * This generic Synopsys Designware MIPI DSI host driver is based on the
>> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/bridge/dw_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define DSI_VERSION			0x00
>> +#define DSI_PWR_UP			0x04
>> +#define RESET				0
>> +#define POWERUP				BIT(0)
>> +
>> +#define DSI_CLKMGR_CFG			0x08
>> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
>> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
>> +
>> +#define DSI_DPI_VCID			0x0c
>> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
>> +
>> +#define DSI_DPI_COLOR_CODING		0x10
>> +#define EN18_LOOSELY			BIT(8)
>> +#define DPI_COLOR_CODING_16BIT_1	0x0
>> +#define DPI_COLOR_CODING_16BIT_2	0x1
>> +#define DPI_COLOR_CODING_16BIT_3	0x2
>> +#define DPI_COLOR_CODING_18BIT_1	0x3
>> +#define DPI_COLOR_CODING_18BIT_2	0x4
>> +#define DPI_COLOR_CODING_24BIT		0x5
>> +
>> +#define DSI_DPI_CFG_POL			0x14
>> +#define COLORM_ACTIVE_LOW		BIT(4)
>> +#define SHUTD_ACTIVE_LOW		BIT(3)
>> +#define HSYNC_ACTIVE_LOW		BIT(2)
>> +#define VSYNC_ACTIVE_LOW		BIT(1)
>> +#define DATAEN_ACTIVE_LOW		BIT(0)
>> +
>> +#define DSI_DPI_LP_CMD_TIM		0x18
>> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
>> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
>> +
>> +#define DSI_DBI_CFG			0x20
>> +#define DSI_DBI_CMDSIZE			0x28
>> +
>> +#define DSI_PCKHDL_CFG			0x2c
>> +#define EN_CRC_RX			BIT(4)
>> +#define EN_ECC_RX			BIT(3)
>> +#define EN_BTA				BIT(2)
>> +#define EN_EOTP_RX			BIT(1)
>> +#define EN_EOTP_TX			BIT(0)
>> +
>> +#define DSI_MODE_CFG			0x34
>> +#define ENABLE_VIDEO_MODE		0
>> +#define ENABLE_CMD_MODE			BIT(0)
>> +
>> +#define DSI_VID_MODE_CFG		0x38
>> +#define FRAME_BTA_ACK			BIT(14)
>> +#define ENABLE_LOW_POWER		(0x3f << 8)
>> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
>> +#define VID_MODE_TYPE_BURST			0x2
>> +#define VID_MODE_TYPE_MASK			0x3
>> +
>> +#define DSI_VID_PKT_SIZE		0x3c
>> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
>> +#define VID_PKT_MAX_SIZE		0x3fff
>> +
>> +#define DSI_VID_HSA_TIME		0x48
>> +#define DSI_VID_HBP_TIME		0x4c
>> +#define DSI_VID_HLINE_TIME		0x50
>> +#define DSI_VID_VSA_LINES		0x54
>> +#define DSI_VID_VBP_LINES		0x58
>> +#define DSI_VID_VFP_LINES		0x5c
>> +#define DSI_VID_VACTIVE_LINES		0x60
>> +#define DSI_CMD_MODE_CFG		0x68
>> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
>> +#define DCS_LW_TX_LP			BIT(19)
>> +#define DCS_SR_0P_TX_LP			BIT(18)
>> +#define DCS_SW_1P_TX_LP			BIT(17)
>> +#define DCS_SW_0P_TX_LP			BIT(16)
>> +#define GEN_LW_TX_LP			BIT(14)
>> +#define GEN_SR_2P_TX_LP			BIT(13)
>> +#define GEN_SR_1P_TX_LP			BIT(12)
>> +#define GEN_SR_0P_TX_LP			BIT(11)
>> +#define GEN_SW_2P_TX_LP			BIT(10)
>> +#define GEN_SW_1P_TX_LP			BIT(9)
>> +#define GEN_SW_0P_TX_LP			BIT(8)
>> +#define EN_ACK_RQST			BIT(1)
>> +#define EN_TEAR_FX			BIT(0)
>> +
>> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
>> +					 DCS_LW_TX_LP | \
>> +					 DCS_SR_0P_TX_LP | \
>> +					 DCS_SW_1P_TX_LP | \
>> +					 DCS_SW_0P_TX_LP | \
>> +					 GEN_LW_TX_LP | \
>> +					 GEN_SR_2P_TX_LP | \
>> +					 GEN_SR_1P_TX_LP | \
>> +					 GEN_SR_0P_TX_LP | \
>> +					 GEN_SW_2P_TX_LP | \
>> +					 GEN_SW_1P_TX_LP | \
>> +					 GEN_SW_0P_TX_LP)
>> +
>> +#define DSI_GEN_HDR			0x6c
>> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
>> +#define GEN_HDATA_MASK			(0xffff << 8)
>> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
>> +#define GEN_HTYPE_MASK			0xff
>> +
>> +#define DSI_GEN_PLD_DATA		0x70
>> +
>> +#define DSI_CMD_PKT_STATUS		0x74
>> +#define GEN_CMD_EMPTY			BIT(0)
>> +#define GEN_CMD_FULL			BIT(1)
>> +#define GEN_PLD_W_EMPTY			BIT(2)
>> +#define GEN_PLD_W_FULL			BIT(3)
>> +#define GEN_PLD_R_EMPTY			BIT(4)
>> +#define GEN_PLD_R_FULL			BIT(5)
>> +#define GEN_RD_CMD_BUSY			BIT(6)
>> +
>> +#define DSI_TO_CNT_CFG			0x78
>> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
>> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
>> +
>> +#define DSI_BTA_TO_CNT			0x8c
>> +#define DSI_LPCLK_CTRL			0x94
>> +#define AUTO_CLKLANE_CTRL		BIT(1)
>> +#define PHY_TXREQUESTCLKHS		BIT(0)
>> +
>> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
>> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
>> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
>> +
>> +#define DSI_PHY_TMR_CFG			0x9c
>> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
>> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
>> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
>> +
>> +#define DSI_PHY_RSTZ			0xa0
>> +#define PHY_DISFORCEPLL			0
>> +#define PHY_ENFORCEPLL			BIT(3)
>> +#define PHY_DISABLECLK			0
>> +#define PHY_ENABLECLK			BIT(2)
>> +#define PHY_RSTZ			0
>> +#define PHY_UNRSTZ			BIT(1)
>> +#define PHY_SHUTDOWNZ			0
>> +#define PHY_UNSHUTDOWNZ			BIT(0)
>> +
>> +#define DSI_PHY_IF_CFG			0xa4
>> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
>> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
>> +
>> +#define DSI_PHY_STATUS			0xb0
>> +#define LOCK				BIT(0)
>> +#define STOP_STATE_CLK_LANE		BIT(2)
>> +
>> +#define DSI_PHY_TST_CTRL0		0xb4
>> +#define PHY_TESTCLK			BIT(1)
>> +#define PHY_UNTESTCLK			0
>> +#define PHY_TESTCLR			BIT(0)
>> +#define PHY_UNTESTCLR			0
>> +
>> +#define DSI_PHY_TST_CTRL1		0xb8
>> +#define PHY_TESTEN			BIT(16)
>> +#define PHY_UNTESTEN			0
>> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
>> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
>> +
>> +#define DSI_INT_ST0			0xbc
>> +#define DSI_INT_ST1			0xc0
>> +#define DSI_INT_MSK0			0xc4
>> +#define DSI_INT_MSK1			0xc8
>> +
>> +#define PHY_STATUS_TIMEOUT_US		10000
>> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
>> +
>> +struct dw_mipi_dsi {
>> +	struct drm_bridge bridge;
>> +	struct drm_connector connector;
>> +	struct mipi_dsi_host dsi_host;
>> +	struct drm_panel *panel;
>> +	struct device *dev;
>> +	void __iomem *base;
>> +
>> +	struct clk *pllref_clk;
>> +	struct clk *pclk;
>> +
>> +	int dpms_mode;
>> +	unsigned int lane_mbps; /* per lane */
>> +	u32 channel;
>> +	u32 lanes;
>> +	u32 format;
>> +	unsigned long mode_flags;
>> +
>> +	const struct dw_mipi_dsi_plat_data *plat_data;
>> +};
>> +
>> +enum dw_mipi_dsi_mode {
>> +	DW_MIPI_DSI_CMD_MODE,
>> +	DW_MIPI_DSI_VID_MODE,
>> +};
> 
> This seems a bit unnecessary, we already have this info in the DSI device's
> mode_flags field.
> 
removed in v3, thanks.

>> +
>> +/*
>> + * The controller should generate 2 frames before
>> + * preparing the peripheral.
>> + */
>> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
>> +{
>> +	int refresh, two_frames;
>> +
>> +	refresh = drm_mode_vrefresh(mode);
>> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
>> +	msleep(two_frames);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
>> +{
>> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
>> +{
>> +	return container_of(con, struct dw_mipi_dsi, connector);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
>> +{
>> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
>> +}
>> +
>> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
>> +{
>> +	writel_relaxed(val, dsi->base + reg);
>> +}
>> +
>> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
>> +{
>> +	return readl_relaxed(dsi->base + reg);
>> +}
>> +
>> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
>> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
>> +			device->lanes);
>> +		return -EINVAL;
>> +	}
>> +
>> +	dsi->lanes = device->lanes;
>> +	dsi->channel = device->channel;
>> +	dsi->format = device->format;
>> +	dsi->mode_flags = device->mode_flags;
>> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
>> +	if (dsi->panel)
>> +		return drm_panel_attach(dsi->panel, &dsi->connector);
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	drm_panel_detach(dsi->panel);
>> +
>> +	return 0;
>> +}
>> +
>> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>> +				   const struct mipi_dsi_msg *msg)
>> +{
>> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
>> +	u32 val = 0;
>> +
>> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
>> +		val |= EN_ACK_RQST;
>> +	if (lpm)
>> +		val |= CMD_MODE_ALL_LP;
>> +
>> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
>> +
>> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
> 
> Will this break rockchip driver if they adapt to it?
> 
> If so, can you make this part of dw_mipi_dsi_plat_data, and mention it as
> a quirk for STM?
> 
This dirty fix has been removed in v3.

>> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +
>> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
>> +}
>> +
>> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
>> +{
>> +	int ret;
>> +	u32 val, mask;
>> +
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, !(val & GEN_CMD_FULL), 1000,
>> +				 CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
>> +
>> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, (val & mask) == mask,
>> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to write command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
>> +				       const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	u16 data = 0;
>> +	u32 val;
>> +
>> +	if (msg->tx_len > 0)
>> +		data |= tx_buf[0];
>> +	if (msg->tx_len > 1)
>> +		data |= tx_buf[1] << 8;
>> +
>> +	if (msg->tx_len > 2) {
>> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
>> +				      const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
>> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
>> +	u32 remainder;
>> +	u32 val;
>> +
>> +	if (msg->tx_len < 3) {
>> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
>> +		if (len < pld_data_bytes) {
>> +			remainder = 0;
>> +			memcpy(&remainder, tx_buf, len);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			len = 0;
>> +		} else {
>> +			memcpy(&remainder, tx_buf, pld_data_bytes);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			tx_buf += pld_data_bytes;
>> +			len -= pld_data_bytes;
>> +		}
>> +
>> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +					 val, !(val & GEN_PLD_W_FULL), 1000,
>> +					 CMD_PKT_STATUS_TIMEOUT_US);
>> +		if (ret < 0) {
>> +			dev_err(dsi->dev,
>> +				"failed to get available write payload FIFO\n");
>> +			return ret;
>> +		}
>> +	}
>> +
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
>> +}
>> +
>> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
>> +					 const struct mipi_dsi_msg *msg)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +	int ret;
>> +
>> +	/*
>> +	 * todo dw drv improvements
> 
> could you write the TODOs in caps so that we don't miss them?
> 
Done in v3.

>> +	 * use mipi_dsi_create_packet() instead of all following
>> +	 * functions and code (no switch cases, no
>> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
>> +	 * and use packet.header...
> 
> Is there something missing in the mipi_dsi helpers to do this now? Or we're
> just leaving this for later?
> 
Nothing is missing in mipi_dsi helpers, I will do my best to improve 
this part in v4.

>> +	 */
>> +	dw_mipi_message_config(dsi, msg);
>> +
>> +	switch (msg->type) {
>> +	case MIPI_DSI_DCS_SHORT_WRITE:
>> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
>> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
>> +		break;
>> +	case MIPI_DSI_DCS_LONG_WRITE:
>> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
>> +		break;
>> +	default:
>> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
>> +			msg->type);
>> +		ret = -EINVAL;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
>> +	.attach = dw_mipi_dsi_host_attach,
>> +	.detach = dw_mipi_dsi_host_detach,
>> +	.transfer = dw_mipi_dsi_host_transfer,
>> +};
>> +
>> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	u32 val;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * enabling low power is panel-dependent, we should use the
>> +	 * panel configuration here...
>> +	 */
>> +	val = ENABLE_LOW_POWER;
>> +
>> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
>> +		val |= VID_MODE_TYPE_BURST;
>> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
>> +	else
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>> +
>> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> +}
>> +
>> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
>> +				 enum dw_mipi_dsi_mode mode)
>> +{
>> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	} else {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
>> +		dw_mipi_dsi_video_mode_config(dsi);
>> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	}
>> +}
>> +
>> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
>> +}
>> +
>> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * The maximum permitted escape clock is 20MHz and it is derived from
>> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
>> +	 *
>> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
>> +	 * which is:
>> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
>> +	 */
>> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
>> +
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
>> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * timeout clock division should be computed with the
>> +	 * high speed transmission counter timeout and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
>> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
>> +}
>> +
>> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
>> +				   struct drm_display_mode *mode)
>> +{
>> +	u32 val = 0, color = 0;
>> +
>> +	switch (dsi->format) {
>> +	case MIPI_DSI_FMT_RGB888:
>> +		color = DPI_COLOR_CODING_24BIT;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666:
>> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666_PACKED:
>> +		color = DPI_COLOR_CODING_18BIT_1;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB565:
>> +		color = DPI_COLOR_CODING_16BIT_1;
>> +		break;
>> +	}
>> +
>> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> +		val |= VSYNC_ACTIVE_LOW;
>> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> +		val |= HSYNC_ACTIVE_LOW;
>> +
>> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
>> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
>> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
>> +	 * should be computed according to byte lane, lane number and only
>> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
>> +	 */
>> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
>> +		  | INVACT_LPCMD_TIME(4));
>> +}
>> +
>> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
>> +}
>> +
>> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
>> +					    struct drm_display_mode *mode)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * only burst mode is supported here. For non-burst video modes,
>> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
>> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
>> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
>> +	 */
>> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
>> +}
>> +
>> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * compute high speed transmission counter timeout according
>> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * the Bus-Turn-Around Timeout Counter should be computed
>> +	 * according to byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
>> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +}
>> +
>> +/* Get lane byte clock cycles. */
>> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
>> +					   struct drm_display_mode *mode,
>> +					   u32 hcomponent)
>> +{
>> +	u32 frac, lbcc;
>> +
>> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
>> +
>> +	frac = lbcc % mode->clock;
>> +	lbcc = lbcc / mode->clock;
>> +	if (frac)
>> +		lbcc++;
>> +
>> +	return lbcc;
>> +}
>> +
>> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
>> +					  struct drm_display_mode *mode)
>> +{
>> +	u32 htotal, hsa, hbp, lbcc;
>> +
>> +	htotal = mode->htotal;
>> +	hsa = mode->hsync_end - mode->hsync_start;
>> +	hbp = mode->htotal - mode->hsync_end;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * computations below may be improved...
>> +	 */
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
>> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
>> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
>> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
>> +}
>> +
>> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
>> +					       struct drm_display_mode *mode)
>> +{
>> +	u32 vactive, vsa, vfp, vbp;
>> +
>> +	vactive = mode->vdisplay;
>> +	vsa = mode->vsync_end - mode->vsync_start;
>> +	vfp = mode->vsync_start - mode->vdisplay;
>> +	vbp = mode->vtotal - mode->vsync_end;
>> +
>> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
>> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
>> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
>> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * data & clock lane timers should be computed according to panel
>> +	 * blankings and to the automatic clock lane control mode...
>> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
>> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
>> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
>> +
>> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
>> +		  | PHY_CLKLP2HS_TIME(0x40));
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * stop wait time should be the maximum between host dsi
>> +	 * and panel stop wait times
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
>> +		  N_LANES(dsi->lanes));
>> +}
>> +
>> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_read(dsi, DSI_INT_ST0);
>> +	dsi_read(dsi, DSI_INT_ST1);
>> +	dsi_write(dsi, DSI_INT_MSK0, 0);
>> +	dsi_write(dsi, DSI_INT_MSK1, 0);
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +
>> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	drm_panel_disable(dsi->panel);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	drm_panel_unprepare(dsi->panel);
>> +
>> +	dw_mipi_dsi_disable(dsi);
>> +	pm_runtime_put(dsi->dev);
>> +	clk_disable(dsi->pclk);
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_encoder *encoder = bridge->encoder;
>> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>> +	void *priv_data = dsi->plat_data->priv_data;
>> +	int ret;
>> +
>> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
>> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>> +
>> +	pm_runtime_get_sync(dsi->dev);
>> +	dw_mipi_dsi_init(dsi);
>> +	dw_mipi_dsi_dpi_config(dsi, mode);
>> +	dw_mipi_dsi_packet_handler_config(dsi);
>> +	dw_mipi_dsi_video_mode_config(dsi);
>> +	dw_mipi_dsi_video_packet_config(dsi, mode);
>> +	dw_mipi_dsi_command_mode_config(dsi);
>> +	dw_mipi_dsi_line_timer_config(dsi, mode);
>> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
>> +	dw_mipi_dsi_dphy_timing_config(dsi);
>> +	dw_mipi_dsi_dphy_interface_config(dsi);
>> +	dw_mipi_dsi_clear_err(dsi);
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * following command is inside dw_mipi_dsi_phy_init()
> 
> You mean in the dw_mipi_dsi_phy_init() implementation of the rockchip
> driver?
> 
> The rockchip driver also calls:
> 
> 	/* Start by clearing PHY state */
> 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
> 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> 
> These registers also look like a part of the DW DSI block.
> 
I added two more functions in v3 that do these reg writes : )

> Also, the rockhip driver does something to configure grf_clks.
> Can you mention a comment that they need to add a pdata quirk
> here.
> 
Difficult to say without knowing that much on grf_clks. I think it could 
be done in the vendor phy... I put more people from Rockchip in cc so 
they may help me to improve this part : )

>> +	 * but this function is also required here. We way move it in the
> s/way/may
>> +	 * phy but here we are using dsi regs...
>> +	 * maybe add the waiting loop here too...
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
>> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
>> +
>> +	ret = phy_ops->init(priv_data);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
>> +
>> +	dw_mipi_dsi_wait_for_two_frames(mode);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	if (drm_panel_prepare(dsi->panel))
>> +		dev_err(dsi->dev, "failed to prepare panel\n");
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
>> +	drm_panel_enable(dsi->panel);
>> +
>> +	clk_disable(dsi->pclk);
>> +
>> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
>> +}
>> +
>> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +
>> +	return drm_panel_get_modes(dsi->panel);
>> +}
>> +
>> +static enum drm_mode_status
>> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
>> +		       struct drm_display_mode *mode)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
>> +	enum drm_mode_status mode_status = MODE_OK;
>> +
>> +	if (pdata->mode_valid)
>> +		mode_status = pdata->mode_valid(pdata->priv_data,
>> +						connector, mode);
>> +
>> +	return mode_status;
>> +}
>> +
>> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
>> +	.get_modes = dw_mipi_dsi_connector_get_modes,
>> +	.mode_valid = dw_mipi_dsi_mode_valid,
>> +};
>> +
>> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
>> +{
>> +	drm_connector_unregister(connector);
>> +	drm_connector_cleanup(connector);
>> +}
>> +
>> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
>> +	.dpms = drm_atomic_helper_connector_dpms,
>> +	.fill_modes = drm_helper_probe_single_connector_modes,
>> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
>> +	.reset = drm_atomic_helper_connector_reset,
>> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_connector *connector = &dsi->connector;
>> +
>> +	if (!bridge->encoder) {
>> +		DRM_ERROR("Parent encoder object not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	/* Set the encoder type as caller does not know it */
>> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
>> +
>> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> +	drm_connector_helper_add(connector,
>> +				 &dw_mipi_dsi_connector_helper_funcs);
>> +
>> +	drm_connector_init(bridge->dev, connector,
>> +			   &dw_mipi_dsi_atomic_connector_funcs,
>> +			   DRM_MODE_CONNECTOR_DSI);
>> +
>> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>> +	.enable = dw_mipi_dsi_bridge_enable,
>> +	.disable = dw_mipi_dsi_bridge_disable,
>> +	.attach = dw_mipi_dsi_bridge_attach,
>> +};
>> +
>> +static struct dw_mipi_dsi *
>> +__dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		    const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct reset_control *apb_rst;
>> +	struct dw_mipi_dsi *dsi;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>> +	if (!dsi)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	dsi->dev = dev;
>> +	dsi->plat_data = plat_data;
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +
>> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
>> +		DRM_ERROR("Phy not properly configured\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	if (!plat_data->base) {
>> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +		if (!res)
>> +			return ERR_PTR(-ENODEV);
>> +
>> +		dsi->base = devm_ioremap_resource(dev, res);
>> +		if (IS_ERR(dsi->base))
>> +			return ERR_PTR(-ENODEV);
>> +
>> +	} else {
>> +		dsi->base = plat_data->base;
>> +	}
>> +
>> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> 
> The hisil implementation doesn't seem to have a pllref_clk. Can you make
> this either optional as you've done for apb_rst, or make it a part of pdata?
> 
> Thanks,
> Archit
> 
In v3, I removed pllref_clk from there, only in stm vendor phy now : )

Note: I will try to add the bridge support in v4 as Hisilicon dsi code 
uses only bridges (no panel support). I may try to use the new 
panel-bridge interface but not sure it will be possible due to mode_valid...

Many thanks,
Philippe

>> +	if (IS_ERR(dsi->pllref_clk)) {
>> +		ret = PTR_ERR(dsi->pllref_clk);
>> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	dsi->pclk = devm_clk_get(dev, "pclk");
>> +	if (IS_ERR(dsi->pclk)) {
>> +		ret = PTR_ERR(dsi->pclk);
>> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	/*
>> +	 * Note that the reset was not defined in the initial device tree, so
>> +	 * we have to be prepared for it not being found.
>> +	 */
>> +	apb_rst = devm_reset_control_get(dev, "apb");
>> +	if (IS_ERR(apb_rst)) {
>> +		ret = PTR_ERR(apb_rst);
>> +		if (ret == -ENOENT) {
>> +			apb_rst = NULL;
>> +		} else {
>> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
>> +			return ERR_PTR(ret);
>> +		}
>> +	}
>> +
>> +	if (apb_rst) {
>> +		ret = clk_prepare_enable(dsi->pclk);
>> +		if (ret) {
>> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
>> +			return ERR_PTR(ret);
>> +		}
>> +
>> +		reset_control_assert(apb_rst);
>> +		usleep_range(10, 20);
>> +		reset_control_deassert(apb_rst);
>> +
>> +		clk_disable(dsi->pclk);
>> +	}
>> +
>> +	ret = clk_prepare_enable(dsi->pllref_clk);
>> +	if (ret) {
>> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	pm_runtime_enable(dev);
>> +
>> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
>> +	dsi->dsi_host.dev = dev;
>> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
>> +		goto err_cleanup;
>> +	}
>> +
>> +	dsi->bridge.driver_private = dsi;
>> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
>> +#ifdef CONFIG_OF
>> +	dsi->bridge.of_node = pdev->dev.of_node;
>> +#endif
>> +
>> +	clk_enable(dsi->pclk);
>> +
>> +	dev_set_drvdata(dev, dsi);
>> +
>> +	return dsi;
>> +
>> +err_cleanup:
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +
>> +	return ERR_PTR(ret);
>> +}
>> +
>> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
>> +{
>> +	pm_runtime_disable(dsi->dev);
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +}
>> +
>> +/*
>> + * Probe/remove API, used from platforms based on the DRM bridge API.
>> + */
>> +int dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		      const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_add(&dsi->bridge);
>> +	if (ret < 0) {
>> +		__dw_mipi_dsi_remove(dsi);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
>> +
>> +void dw_mipi_dsi_remove(struct platform_device *pdev)
>> +{
>> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
>> +
>> +	mipi_dsi_host_unregister(&dsi->dsi_host);
>> +	drm_bridge_remove(&dsi->bridge);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
>> +
>> +/*
>> + * Bind/unbind API, used from platforms based on the component framework.
>> + */
>> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
>> +		     const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
>> +	if (ret) {
>> +		dw_mipi_dsi_remove(pdev);
>> +		DRM_ERROR("Failed to initialize bridge with drm\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
>> +
>> +void dw_mipi_dsi_unbind(struct device *dev)
>> +{
>> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
>> +
>> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
>> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
>> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:dw-mipi-dsi");
>>
> 

[PATCH v2 3/5] drm/bridge/synopsys: Add MIPI DSI host controller bridge

[Philippe CORNU]

On 05/25/2017 01:23 PM, Archit Taneja wrote:
> Hi Philippe,
> 
> Thanks a lot for creating a bridge driver for this.
> 
> Copying some Hisilicon and Rockchip folks so that they can consider adapting to this.
> 
> Some comments below.
Hi Archit,
and many thanks for your great comments.

> 
> On 05/19/2017 08:50 PM, Philippe CORNU wrote:
>> Add a Synopsys Designware MIPI DSI host DRM bridge driver, based on the
>> Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>>
>> Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
>> ---
>>   drivers/gpu/drm/bridge/synopsys/Kconfig       |    9 +
>>   drivers/gpu/drm/bridge/synopsys/Makefile      |    2 +
>>   drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 1024 +++++++++++++++++++++++++
>>   3 files changed, 1035 insertions(+)
>>   create mode 100644 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Kconfig b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> index 40d2827..d7fbdff 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Kconfig
>> +++ b/drivers/gpu/drm/bridge/synopsys/Kconfig
>> @@ -21,3 +21,12 @@ config DRM_DW_HDMI_I2S_AUDIO
>>   	help
>>   	  Support the I2S Audio interface which is part of the Synopsys
>>   	  Designware HDMI block.
>> +
>> +config DRM_DW_MIPI_DSI
>> +	tristate "Synopsys DesignWare MIPI DSI host controller bridge"
>> +	select DRM_KMS_HELPER
>> +	select DRM_MIPI_DSI
>> +	select DRM_PANEL
>> +	help
>> +	  Choose this if you want to use the Synopsys DesignWare MIPI DSI host
>> +	  controller bridge.
>> diff --git a/drivers/gpu/drm/bridge/synopsys/Makefile b/drivers/gpu/drm/bridge/synopsys/Makefile
>> index 17aa7a6..5f57d36 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/Makefile
>> +++ b/drivers/gpu/drm/bridge/synopsys/Makefile
>> @@ -3,3 +3,5 @@
>>   obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
>>   obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
>>   obj-$(CONFIG_DRM_DW_HDMI_I2S_AUDIO) += dw-hdmi-i2s-audio.o
>> +
>> +obj-$(CONFIG_DRM_DW_MIPI_DSI) += dw-mipi-dsi.o
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> new file mode 100644
>> index 0000000..041f564
>> --- /dev/null
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
>> @@ -0,0 +1,1024 @@
>> +/*
>> + * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * Modified by Philippe Cornu <philippe.cornu@st.com>
>> + * This generic Synopsys Designware MIPI DSI host driver is based on the
>> + * Rockchip version from rockchip/dw-mipi-dsi.c with phy & bridge APIs.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/component.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <drm/drmP.h>
>> +#include <drm/drm_atomic_helper.h>
>> +#include <drm/drm_crtc.h>
>> +#include <drm/drm_crtc_helper.h>
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/bridge/dw_mipi_dsi.h>
>> +#include <video/mipi_display.h>
>> +
>> +#define DSI_VERSION			0x00
>> +#define DSI_PWR_UP			0x04
>> +#define RESET				0
>> +#define POWERUP				BIT(0)
>> +
>> +#define DSI_CLKMGR_CFG			0x08
>> +#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
>> +#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
>> +
>> +#define DSI_DPI_VCID			0x0c
>> +#define DPI_VID(vid)			(((vid) & 0x3) << 0)
>> +
>> +#define DSI_DPI_COLOR_CODING		0x10
>> +#define EN18_LOOSELY			BIT(8)
>> +#define DPI_COLOR_CODING_16BIT_1	0x0
>> +#define DPI_COLOR_CODING_16BIT_2	0x1
>> +#define DPI_COLOR_CODING_16BIT_3	0x2
>> +#define DPI_COLOR_CODING_18BIT_1	0x3
>> +#define DPI_COLOR_CODING_18BIT_2	0x4
>> +#define DPI_COLOR_CODING_24BIT		0x5
>> +
>> +#define DSI_DPI_CFG_POL			0x14
>> +#define COLORM_ACTIVE_LOW		BIT(4)
>> +#define SHUTD_ACTIVE_LOW		BIT(3)
>> +#define HSYNC_ACTIVE_LOW		BIT(2)
>> +#define VSYNC_ACTIVE_LOW		BIT(1)
>> +#define DATAEN_ACTIVE_LOW		BIT(0)
>> +
>> +#define DSI_DPI_LP_CMD_TIM		0x18
>> +#define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
>> +#define INVACT_LPCMD_TIME(p)		((p) & 0xff)
>> +
>> +#define DSI_DBI_CFG			0x20
>> +#define DSI_DBI_CMDSIZE			0x28
>> +
>> +#define DSI_PCKHDL_CFG			0x2c
>> +#define EN_CRC_RX			BIT(4)
>> +#define EN_ECC_RX			BIT(3)
>> +#define EN_BTA				BIT(2)
>> +#define EN_EOTP_RX			BIT(1)
>> +#define EN_EOTP_TX			BIT(0)
>> +
>> +#define DSI_MODE_CFG			0x34
>> +#define ENABLE_VIDEO_MODE		0
>> +#define ENABLE_CMD_MODE			BIT(0)
>> +
>> +#define DSI_VID_MODE_CFG		0x38
>> +#define FRAME_BTA_ACK			BIT(14)
>> +#define ENABLE_LOW_POWER		(0x3f << 8)
>> +#define ENABLE_LOW_POWER_MASK		(0x3f << 8)
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
>> +#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS	0x1
>> +#define VID_MODE_TYPE_BURST			0x2
>> +#define VID_MODE_TYPE_MASK			0x3
>> +
>> +#define DSI_VID_PKT_SIZE		0x3c
>> +#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
>> +#define VID_PKT_MAX_SIZE		0x3fff
>> +
>> +#define DSI_VID_HSA_TIME		0x48
>> +#define DSI_VID_HBP_TIME		0x4c
>> +#define DSI_VID_HLINE_TIME		0x50
>> +#define DSI_VID_VSA_LINES		0x54
>> +#define DSI_VID_VBP_LINES		0x58
>> +#define DSI_VID_VFP_LINES		0x5c
>> +#define DSI_VID_VACTIVE_LINES		0x60
>> +#define DSI_CMD_MODE_CFG		0x68
>> +#define MAX_RD_PKT_SIZE_LP		BIT(24)
>> +#define DCS_LW_TX_LP			BIT(19)
>> +#define DCS_SR_0P_TX_LP			BIT(18)
>> +#define DCS_SW_1P_TX_LP			BIT(17)
>> +#define DCS_SW_0P_TX_LP			BIT(16)
>> +#define GEN_LW_TX_LP			BIT(14)
>> +#define GEN_SR_2P_TX_LP			BIT(13)
>> +#define GEN_SR_1P_TX_LP			BIT(12)
>> +#define GEN_SR_0P_TX_LP			BIT(11)
>> +#define GEN_SW_2P_TX_LP			BIT(10)
>> +#define GEN_SW_1P_TX_LP			BIT(9)
>> +#define GEN_SW_0P_TX_LP			BIT(8)
>> +#define EN_ACK_RQST			BIT(1)
>> +#define EN_TEAR_FX			BIT(0)
>> +
>> +#define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
>> +					 DCS_LW_TX_LP | \
>> +					 DCS_SR_0P_TX_LP | \
>> +					 DCS_SW_1P_TX_LP | \
>> +					 DCS_SW_0P_TX_LP | \
>> +					 GEN_LW_TX_LP | \
>> +					 GEN_SR_2P_TX_LP | \
>> +					 GEN_SR_1P_TX_LP | \
>> +					 GEN_SR_0P_TX_LP | \
>> +					 GEN_SW_2P_TX_LP | \
>> +					 GEN_SW_1P_TX_LP | \
>> +					 GEN_SW_0P_TX_LP)
>> +
>> +#define DSI_GEN_HDR			0x6c
>> +#define GEN_HDATA(data)			(((data) & 0xffff) << 8)
>> +#define GEN_HDATA_MASK			(0xffff << 8)
>> +#define GEN_HTYPE(type)			(((type) & 0xff) << 0)
>> +#define GEN_HTYPE_MASK			0xff
>> +
>> +#define DSI_GEN_PLD_DATA		0x70
>> +
>> +#define DSI_CMD_PKT_STATUS		0x74
>> +#define GEN_CMD_EMPTY			BIT(0)
>> +#define GEN_CMD_FULL			BIT(1)
>> +#define GEN_PLD_W_EMPTY			BIT(2)
>> +#define GEN_PLD_W_FULL			BIT(3)
>> +#define GEN_PLD_R_EMPTY			BIT(4)
>> +#define GEN_PLD_R_FULL			BIT(5)
>> +#define GEN_RD_CMD_BUSY			BIT(6)
>> +
>> +#define DSI_TO_CNT_CFG			0x78
>> +#define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
>> +#define LPRX_TO_CNT(p)			((p) & 0xffff)
>> +
>> +#define DSI_BTA_TO_CNT			0x8c
>> +#define DSI_LPCLK_CTRL			0x94
>> +#define AUTO_CLKLANE_CTRL		BIT(1)
>> +#define PHY_TXREQUESTCLKHS		BIT(0)
>> +
>> +#define DSI_PHY_TMR_LPCLK_CFG		0x98
>> +#define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
>> +#define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
>> +
>> +#define DSI_PHY_TMR_CFG			0x9c
>> +#define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
>> +#define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
>> +#define MAX_RD_TIME(lbcc)		((lbcc) & 0x7fff)
>> +
>> +#define DSI_PHY_RSTZ			0xa0
>> +#define PHY_DISFORCEPLL			0
>> +#define PHY_ENFORCEPLL			BIT(3)
>> +#define PHY_DISABLECLK			0
>> +#define PHY_ENABLECLK			BIT(2)
>> +#define PHY_RSTZ			0
>> +#define PHY_UNRSTZ			BIT(1)
>> +#define PHY_SHUTDOWNZ			0
>> +#define PHY_UNSHUTDOWNZ			BIT(0)
>> +
>> +#define DSI_PHY_IF_CFG			0xa4
>> +#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
>> +#define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
>> +
>> +#define DSI_PHY_STATUS			0xb0
>> +#define LOCK				BIT(0)
>> +#define STOP_STATE_CLK_LANE		BIT(2)
>> +
>> +#define DSI_PHY_TST_CTRL0		0xb4
>> +#define PHY_TESTCLK			BIT(1)
>> +#define PHY_UNTESTCLK			0
>> +#define PHY_TESTCLR			BIT(0)
>> +#define PHY_UNTESTCLR			0
>> +
>> +#define DSI_PHY_TST_CTRL1		0xb8
>> +#define PHY_TESTEN			BIT(16)
>> +#define PHY_UNTESTEN			0
>> +#define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
>> +#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
>> +
>> +#define DSI_INT_ST0			0xbc
>> +#define DSI_INT_ST1			0xc0
>> +#define DSI_INT_MSK0			0xc4
>> +#define DSI_INT_MSK1			0xc8
>> +
>> +#define PHY_STATUS_TIMEOUT_US		10000
>> +#define CMD_PKT_STATUS_TIMEOUT_US	20000
>> +
>> +struct dw_mipi_dsi {
>> +	struct drm_bridge bridge;
>> +	struct drm_connector connector;
>> +	struct mipi_dsi_host dsi_host;
>> +	struct drm_panel *panel;
>> +	struct device *dev;
>> +	void __iomem *base;
>> +
>> +	struct clk *pllref_clk;
>> +	struct clk *pclk;
>> +
>> +	int dpms_mode;
>> +	unsigned int lane_mbps; /* per lane */
>> +	u32 channel;
>> +	u32 lanes;
>> +	u32 format;
>> +	unsigned long mode_flags;
>> +
>> +	const struct dw_mipi_dsi_plat_data *plat_data;
>> +};
>> +
>> +enum dw_mipi_dsi_mode {
>> +	DW_MIPI_DSI_CMD_MODE,
>> +	DW_MIPI_DSI_VID_MODE,
>> +};
> 
> This seems a bit unnecessary, we already have this info in the DSI device's
> mode_flags field.
> 
removed in v3, thanks.

>> +
>> +/*
>> + * The controller should generate 2 frames before
>> + * preparing the peripheral.
>> + */
>> +static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
>> +{
>> +	int refresh, two_frames;
>> +
>> +	refresh = drm_mode_vrefresh(mode);
>> +	two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
>> +	msleep(two_frames);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *host_to_dsi(struct mipi_dsi_host *host)
>> +{
>> +	return container_of(host, struct dw_mipi_dsi, dsi_host);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *con_to_dsi(struct drm_connector *con)
>> +{
>> +	return container_of(con, struct dw_mipi_dsi, connector);
>> +}
>> +
>> +static inline struct dw_mipi_dsi *bridge_to_dsi(struct drm_bridge *bridge)
>> +{
>> +	return container_of(bridge, struct dw_mipi_dsi, bridge);
>> +}
>> +
>> +static inline void dsi_write(struct dw_mipi_dsi *dsi, u32 reg, u32 val)
>> +{
>> +	writel_relaxed(val, dsi->base + reg);
>> +}
>> +
>> +static inline u32 dsi_read(struct dw_mipi_dsi *dsi, u32 reg)
>> +{
>> +	return readl_relaxed(dsi->base + reg);
>> +}
>> +
>> +static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	if (device->lanes > dsi->plat_data->max_data_lanes) {
>> +		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
>> +			device->lanes);
>> +		return -EINVAL;
>> +	}
>> +
>> +	dsi->lanes = device->lanes;
>> +	dsi->channel = device->channel;
>> +	dsi->format = device->format;
>> +	dsi->mode_flags = device->mode_flags;
>> +	dsi->panel = of_drm_find_panel(device->dev.of_node);
>> +	if (dsi->panel)
>> +		return drm_panel_attach(dsi->panel, &dsi->connector);
>> +
>> +	return -EINVAL;
>> +}
>> +
>> +static int dw_mipi_dsi_host_detach(struct mipi_dsi_host *host,
>> +				   struct mipi_dsi_device *device)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +
>> +	drm_panel_detach(dsi->panel);
>> +
>> +	return 0;
>> +}
>> +
>> +static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>> +				   const struct mipi_dsi_msg *msg)
>> +{
>> +	bool lpm = msg->flags & MIPI_DSI_MSG_USE_LPM;
>> +	u32 val = 0;
>> +
>> +	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
>> +		val |= EN_ACK_RQST;
>> +	if (lpm)
>> +		val |= CMD_MODE_ALL_LP;
>> +
>> +	dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
>> +
>> +	/* todo debug force the PHY_TXREQUESTCLKHS, to be improved... */
> 
> Will this break rockchip driver if they adapt to it?
> 
> If so, can you make this part of dw_mipi_dsi_plat_data, and mention it as
> a quirk for STM?
> 
This dirty fix has been removed in v3.

>> +	dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +
>> +	dsi_write(dsi, DSI_CMD_MODE_CFG, val);
>> +}
>> +
>> +static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
>> +{
>> +	int ret;
>> +	u32 val, mask;
>> +
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, !(val & GEN_CMD_FULL), 1000,
>> +				 CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to get available command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	dsi_write(dsi, DSI_GEN_HDR, hdr_val);
>> +
>> +	mask = GEN_CMD_EMPTY | GEN_PLD_W_EMPTY;
>> +	ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +				 val, (val & mask) == mask,
>> +				 1000, CMD_PKT_STATUS_TIMEOUT_US);
>> +	if (ret < 0) {
>> +		dev_err(dsi->dev, "failed to write command FIFO\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
>> +				       const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	u16 data = 0;
>> +	u32 val;
>> +
>> +	if (msg->tx_len > 0)
>> +		data |= tx_buf[0];
>> +	if (msg->tx_len > 1)
>> +		data |= tx_buf[1] << 8;
>> +
>> +	if (msg->tx_len > 2) {
>> +		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	val = GEN_HDATA(data) | GEN_HTYPE(msg->type);
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, val);
>> +}
>> +
>> +static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
>> +				      const struct mipi_dsi_msg *msg)
>> +{
>> +	const u8 *tx_buf = msg->tx_buf;
>> +	int len = msg->tx_len, pld_data_bytes = sizeof(u32), ret;
>> +	u32 hdr_val = GEN_HDATA(msg->tx_len) | GEN_HTYPE(msg->type);
>> +	u32 remainder;
>> +	u32 val;
>> +
>> +	if (msg->tx_len < 3) {
>> +		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
>> +			msg->tx_len);
>> +		return -EINVAL;
>> +	}
>> +
>> +	while (DIV_ROUND_UP(len, pld_data_bytes)) {
>> +		if (len < pld_data_bytes) {
>> +			remainder = 0;
>> +			memcpy(&remainder, tx_buf, len);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			len = 0;
>> +		} else {
>> +			memcpy(&remainder, tx_buf, pld_data_bytes);
>> +			dsi_write(dsi, DSI_GEN_PLD_DATA, remainder);
>> +			tx_buf += pld_data_bytes;
>> +			len -= pld_data_bytes;
>> +		}
>> +
>> +		ret = readl_poll_timeout(dsi->base + DSI_CMD_PKT_STATUS,
>> +					 val, !(val & GEN_PLD_W_FULL), 1000,
>> +					 CMD_PKT_STATUS_TIMEOUT_US);
>> +		if (ret < 0) {
>> +			dev_err(dsi->dev,
>> +				"failed to get available write payload FIFO\n");
>> +			return ret;
>> +		}
>> +	}
>> +
>> +	return dw_mipi_dsi_gen_pkt_hdr_write(dsi, hdr_val);
>> +}
>> +
>> +static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
>> +					 const struct mipi_dsi_msg *msg)
>> +{
>> +	struct dw_mipi_dsi *dsi = host_to_dsi(host);
>> +	int ret;
>> +
>> +	/*
>> +	 * todo dw drv improvements
> 
> could you write the TODOs in caps so that we don't miss them?
> 
Done in v3.

>> +	 * use mipi_dsi_create_packet() instead of all following
>> +	 * functions and code (no switch cases, no
>> +	 * dw_mipi_dsi_dcs_short_write(), only the loop in long_write...)
>> +	 * and use packet.header...
> 
> Is there something missing in the mipi_dsi helpers to do this now? Or we're
> just leaving this for later?
> 
Nothing is missing in mipi_dsi helpers, I will do my best to improve 
this part in v4.

>> +	 */
>> +	dw_mipi_message_config(dsi, msg);
>> +
>> +	switch (msg->type) {
>> +	case MIPI_DSI_DCS_SHORT_WRITE:
>> +	case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
>> +	case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
>> +		ret = dw_mipi_dsi_dcs_short_write(dsi, msg);
>> +		break;
>> +	case MIPI_DSI_DCS_LONG_WRITE:
>> +		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
>> +		break;
>> +	default:
>> +		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
>> +			msg->type);
>> +		ret = -EINVAL;
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static const struct mipi_dsi_host_ops dw_mipi_dsi_host_ops = {
>> +	.attach = dw_mipi_dsi_host_attach,
>> +	.detach = dw_mipi_dsi_host_detach,
>> +	.transfer = dw_mipi_dsi_host_transfer,
>> +};
>> +
>> +static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	u32 val;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * enabling low power is panel-dependent, we should use the
>> +	 * panel configuration here...
>> +	 */
>> +	val = ENABLE_LOW_POWER;
>> +
>> +	if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
>> +		val |= VID_MODE_TYPE_BURST;
>> +	else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_PULSES;
>> +	else
>> +		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>> +
>> +	dsi_write(dsi, DSI_VID_MODE_CFG, val);
>> +}
>> +
>> +static void dw_mipi_dsi_set_mode(struct dw_mipi_dsi *dsi,
>> +				 enum dw_mipi_dsi_mode mode)
>> +{
>> +	if (mode == DW_MIPI_DSI_CMD_MODE) {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	} else {
>> +		dsi_write(dsi, DSI_PWR_UP, RESET);
>> +		dsi_write(dsi, DSI_MODE_CFG, ENABLE_VIDEO_MODE);
>> +		dw_mipi_dsi_video_mode_config(dsi);
>> +		dsi_write(dsi, DSI_LPCLK_CTRL, PHY_TXREQUESTCLKHS);
>> +		dsi_write(dsi, DSI_PWR_UP, POWERUP);
>> +	}
>> +}
>> +
>> +static void dw_mipi_dsi_disable(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_RSTZ);
>> +}
>> +
>> +static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * The maximum permitted escape clock is 20MHz and it is derived from
>> +	 * lanebyteclk, which is running at "lane_mbps / 8".  Thus we want:
>> +	 *
>> +	 *     (lane_mbps >> 3) / esc_clk_division < 20
>> +	 * which is:
>> +	 *     (lane_mbps >> 3) / 20 > esc_clk_division
>> +	 */
>> +	u32 esc_clk_division = (dsi->lane_mbps >> 3) / 20 + 1;
>> +
>> +	dsi_write(dsi, DSI_PWR_UP, RESET);
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_DISFORCEPLL | PHY_DISABLECLK
>> +		  | PHY_RSTZ | PHY_SHUTDOWNZ);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * timeout clock division should be computed with the
>> +	 * high speed transmission counter timeout and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
>> +		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
>> +}
>> +
>> +static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
>> +				   struct drm_display_mode *mode)
>> +{
>> +	u32 val = 0, color = 0;
>> +
>> +	switch (dsi->format) {
>> +	case MIPI_DSI_FMT_RGB888:
>> +		color = DPI_COLOR_CODING_24BIT;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666:
>> +		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB666_PACKED:
>> +		color = DPI_COLOR_CODING_18BIT_1;
>> +		break;
>> +	case MIPI_DSI_FMT_RGB565:
>> +		color = DPI_COLOR_CODING_16BIT_1;
>> +		break;
>> +	}
>> +
>> +	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
>> +		val |= VSYNC_ACTIVE_LOW;
>> +	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>> +		val |= HSYNC_ACTIVE_LOW;
>> +
>> +	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
>> +	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
>> +	dsi_write(dsi, DSI_DPI_CFG_POL, val);
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * largest packet sizes during hfp or during vsa/vpb/vfp
>> +	 * should be computed according to byte lane, lane number and only
>> +	 * if sending lp cmds in high speed is enable (PHY_TXREQUESTCLKHS)
>> +	 */
>> +	dsi_write(dsi, DSI_DPI_LP_CMD_TIM, OUTVACT_LPCMD_TIME(4)
>> +		  | INVACT_LPCMD_TIME(4));
>> +}
>> +
>> +static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
>> +}
>> +
>> +static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
>> +					    struct drm_display_mode *mode)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * only burst mode is supported here. For non-burst video modes,
>> +	 * we should compute DSI_VID_PKT_SIZE, DSI_VCCR.NUMC &
>> +	 * DSI_VNPCR.NPSIZE... especially because this driver supports
>> +	 * non-burst video modes, see dw_mipi_dsi_video_mode_config()...
>> +	 */
>> +	dsi_write(dsi, DSI_VID_PKT_SIZE, VID_PKT_SIZE(mode->hdisplay));
>> +}
>> +
>> +static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * compute high speed transmission counter timeout according
>> +	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * the Bus-Turn-Around Timeout Counter should be computed
>> +	 * according to byte lane...
>> +	 */
>> +	dsi_write(dsi, DSI_BTA_TO_CNT, 0xd00);
>> +	dsi_write(dsi, DSI_MODE_CFG, ENABLE_CMD_MODE);
>> +}
>> +
>> +/* Get lane byte clock cycles. */
>> +static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
>> +					   struct drm_display_mode *mode,
>> +					   u32 hcomponent)
>> +{
>> +	u32 frac, lbcc;
>> +
>> +	lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
>> +
>> +	frac = lbcc % mode->clock;
>> +	lbcc = lbcc / mode->clock;
>> +	if (frac)
>> +		lbcc++;
>> +
>> +	return lbcc;
>> +}
>> +
>> +static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
>> +					  struct drm_display_mode *mode)
>> +{
>> +	u32 htotal, hsa, hbp, lbcc;
>> +
>> +	htotal = mode->htotal;
>> +	hsa = mode->hsync_end - mode->hsync_start;
>> +	hbp = mode->htotal - mode->hsync_end;
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * computations below may be improved...
>> +	 */
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
>> +	dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
>> +	dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
>> +
>> +	lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
>> +	dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
>> +}
>> +
>> +static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
>> +					       struct drm_display_mode *mode)
>> +{
>> +	u32 vactive, vsa, vfp, vbp;
>> +
>> +	vactive = mode->vdisplay;
>> +	vsa = mode->vsync_end - mode->vsync_start;
>> +	vfp = mode->vsync_start - mode->vdisplay;
>> +	vbp = mode->vtotal - mode->vsync_end;
>> +
>> +	dsi_write(dsi, DSI_VID_VACTIVE_LINES, vactive);
>> +	dsi_write(dsi, DSI_VID_VSA_LINES, vsa);
>> +	dsi_write(dsi, DSI_VID_VFP_LINES, vfp);
>> +	dsi_write(dsi, DSI_VID_VBP_LINES, vbp);
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_timing_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * data & clock lane timers should be computed according to panel
>> +	 * blankings and to the automatic clock lane control mode...
>> +	 * note: DSI_PHY_TMR_CFG.MAX_RD_TIME should be in line with
>> +	 * DSI_CMD_MODE_CFG.MAX_RD_PKT_SIZE_LP (see CMD_MODE_ALL_LP)
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_TMR_CFG, PHY_HS2LP_TIME(0x40)
>> +		  | PHY_LP2HS_TIME(0x40) | MAX_RD_TIME(10000));
>> +
>> +	dsi_write(dsi, DSI_PHY_TMR_LPCLK_CFG, PHY_CLKHS2LP_TIME(0x40)
>> +		  | PHY_CLKLP2HS_TIME(0x40));
>> +}
>> +
>> +static void dw_mipi_dsi_dphy_interface_config(struct dw_mipi_dsi *dsi)
>> +{
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * stop wait time should be the maximum between host dsi
>> +	 * and panel stop wait times
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_IF_CFG, PHY_STOP_WAIT_TIME(0x20) |
>> +		  N_LANES(dsi->lanes));
>> +}
>> +
>> +static void dw_mipi_dsi_clear_err(struct dw_mipi_dsi *dsi)
>> +{
>> +	dsi_read(dsi, DSI_INT_ST0);
>> +	dsi_read(dsi, DSI_INT_ST1);
>> +	dsi_write(dsi, DSI_INT_MSK0, 0);
>> +	dsi_write(dsi, DSI_INT_MSK1, 0);
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_disable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +
>> +	if (dsi->dpms_mode != DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	drm_panel_disable(dsi->panel);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	drm_panel_unprepare(dsi->panel);
>> +
>> +	dw_mipi_dsi_disable(dsi);
>> +	pm_runtime_put(dsi->dev);
>> +	clk_disable(dsi->pclk);
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +}
>> +
>> +static void dw_mipi_dsi_bridge_enable(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_encoder *encoder = bridge->encoder;
>> +	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
>> +	const struct dw_mipi_dsi_phy_ops *phy_ops = dsi->plat_data->phy_ops;
>> +	void *priv_data = dsi->plat_data->priv_data;
>> +	int ret;
>> +
>> +	if (dsi->dpms_mode == DRM_MODE_DPMS_ON)
>> +		return;
>> +
>> +	if (clk_enable(dsi->pclk)) {
>> +		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
>> +		return;
>> +	}
>> +
>> +	ret = phy_ops->get_lane_mbps(priv_data, mode, dsi->pllref_clk,
>> +				     dsi->lanes, dsi->format, &dsi->lane_mbps);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy get_lane_mbps() failed\n");
>> +
>> +	pm_runtime_get_sync(dsi->dev);
>> +	dw_mipi_dsi_init(dsi);
>> +	dw_mipi_dsi_dpi_config(dsi, mode);
>> +	dw_mipi_dsi_packet_handler_config(dsi);
>> +	dw_mipi_dsi_video_mode_config(dsi);
>> +	dw_mipi_dsi_video_packet_config(dsi, mode);
>> +	dw_mipi_dsi_command_mode_config(dsi);
>> +	dw_mipi_dsi_line_timer_config(dsi, mode);
>> +	dw_mipi_dsi_vertical_timing_config(dsi, mode);
>> +	dw_mipi_dsi_dphy_timing_config(dsi);
>> +	dw_mipi_dsi_dphy_interface_config(dsi);
>> +	dw_mipi_dsi_clear_err(dsi);
>> +
>> +	/*
>> +	 * todo dw drv improvements
>> +	 * following command is inside dw_mipi_dsi_phy_init()
> 
> You mean in the dw_mipi_dsi_phy_init() implementation of the rockchip
> driver?
> 
> The rockchip driver also calls:
> 
> 	/* Start by clearing PHY state */
> 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_TESTCLR);
> 	dsi_write(dsi, DSI_PHY_TST_CTRL0, PHY_UNTESTCLR);
> 
> These registers also look like a part of the DW DSI block.
> 
I added two more functions in v3 that do these reg writes : )

> Also, the rockhip driver does something to configure grf_clks.
> Can you mention a comment that they need to add a pdata quirk
> here.
> 
Difficult to say without knowing that much on grf_clks. I think it could 
be done in the vendor phy... I put more people from Rockchip in cc so 
they may help me to improve this part : )

>> +	 * but this function is also required here. We way move it in the
> s/way/may
>> +	 * phy but here we are using dsi regs...
>> +	 * maybe add the waiting loop here too...
>> +	 */
>> +	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
>> +				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
>> +
>> +	ret = phy_ops->init(priv_data);
>> +	if (ret)
>> +		DRM_DEBUG_DRIVER("Phy init() failed\n");
>> +
>> +	dw_mipi_dsi_wait_for_two_frames(mode);
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
>> +	if (drm_panel_prepare(dsi->panel))
>> +		dev_err(dsi->dev, "failed to prepare panel\n");
>> +
>> +	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
>> +	drm_panel_enable(dsi->panel);
>> +
>> +	clk_disable(dsi->pclk);
>> +
>> +	dsi->dpms_mode = DRM_MODE_DPMS_ON;
>> +}
>> +
>> +static int dw_mipi_dsi_connector_get_modes(struct drm_connector *connector)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +
>> +	return drm_panel_get_modes(dsi->panel);
>> +}
>> +
>> +static enum drm_mode_status
>> +dw_mipi_dsi_mode_valid(struct drm_connector *connector,
>> +		       struct drm_display_mode *mode)
>> +{
>> +	struct dw_mipi_dsi *dsi = con_to_dsi(connector);
>> +	const struct dw_mipi_dsi_plat_data *pdata = dsi->plat_data;
>> +	enum drm_mode_status mode_status = MODE_OK;
>> +
>> +	if (pdata->mode_valid)
>> +		mode_status = pdata->mode_valid(pdata->priv_data,
>> +						connector, mode);
>> +
>> +	return mode_status;
>> +}
>> +
>> +static struct drm_connector_helper_funcs dw_mipi_dsi_connector_helper_funcs = {
>> +	.get_modes = dw_mipi_dsi_connector_get_modes,
>> +	.mode_valid = dw_mipi_dsi_mode_valid,
>> +};
>> +
>> +static void dw_mipi_dsi_drm_connector_destroy(struct drm_connector *connector)
>> +{
>> +	drm_connector_unregister(connector);
>> +	drm_connector_cleanup(connector);
>> +}
>> +
>> +static const struct drm_connector_funcs dw_mipi_dsi_atomic_connector_funcs = {
>> +	.dpms = drm_atomic_helper_connector_dpms,
>> +	.fill_modes = drm_helper_probe_single_connector_modes,
>> +	.destroy = dw_mipi_dsi_drm_connector_destroy,
>> +	.reset = drm_atomic_helper_connector_reset,
>> +	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
>> +	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
>> +};
>> +
>> +static int dw_mipi_dsi_bridge_attach(struct drm_bridge *bridge)
>> +{
>> +	struct dw_mipi_dsi *dsi = bridge_to_dsi(bridge);
>> +	struct drm_connector *connector = &dsi->connector;
>> +
>> +	if (!bridge->encoder) {
>> +		DRM_ERROR("Parent encoder object not found\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	/* Set the encoder type as caller does not know it */
>> +	bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
>> +
>> +	connector->polled = DRM_CONNECTOR_POLL_HPD;
>> +
>> +	drm_connector_helper_add(connector,
>> +				 &dw_mipi_dsi_connector_helper_funcs);
>> +
>> +	drm_connector_init(bridge->dev, connector,
>> +			   &dw_mipi_dsi_atomic_connector_funcs,
>> +			   DRM_MODE_CONNECTOR_DSI);
>> +
>> +	drm_mode_connector_attach_encoder(connector, bridge->encoder);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>> +	.enable = dw_mipi_dsi_bridge_enable,
>> +	.disable = dw_mipi_dsi_bridge_disable,
>> +	.attach = dw_mipi_dsi_bridge_attach,
>> +};
>> +
>> +static struct dw_mipi_dsi *
>> +__dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		    const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct reset_control *apb_rst;
>> +	struct dw_mipi_dsi *dsi;
>> +	struct resource *res;
>> +	int ret;
>> +
>> +	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
>> +	if (!dsi)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	dsi->dev = dev;
>> +	dsi->plat_data = plat_data;
>> +	dsi->dpms_mode = DRM_MODE_DPMS_OFF;
>> +
>> +	if (!plat_data->phy_ops->init || !plat_data->phy_ops->get_lane_mbps) {
>> +		DRM_ERROR("Phy not properly configured\n");
>> +		return ERR_PTR(-ENODEV);
>> +	}
>> +
>> +	if (!plat_data->base) {
>> +		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +		if (!res)
>> +			return ERR_PTR(-ENODEV);
>> +
>> +		dsi->base = devm_ioremap_resource(dev, res);
>> +		if (IS_ERR(dsi->base))
>> +			return ERR_PTR(-ENODEV);
>> +
>> +	} else {
>> +		dsi->base = plat_data->base;
>> +	}
>> +
>> +	dsi->pllref_clk = devm_clk_get(dev, "ref");
> 
> The hisil implementation doesn't seem to have a pllref_clk. Can you make
> this either optional as you've done for apb_rst, or make it a part of pdata?
> 
> Thanks,
> Archit
> 
In v3, I removed pllref_clk from there, only in stm vendor phy now : )

Note: I will try to add the bridge support in v4 as Hisilicon dsi code 
uses only bridges (no panel support). I may try to use the new 
panel-bridge interface but not sure it will be possible due to mode_valid...

Many thanks,
Philippe

>> +	if (IS_ERR(dsi->pllref_clk)) {
>> +		ret = PTR_ERR(dsi->pllref_clk);
>> +		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	dsi->pclk = devm_clk_get(dev, "pclk");
>> +	if (IS_ERR(dsi->pclk)) {
>> +		ret = PTR_ERR(dsi->pclk);
>> +		dev_err(dev, "Unable to get pclk: %d\n", ret);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	/*
>> +	 * Note that the reset was not defined in the initial device tree, so
>> +	 * we have to be prepared for it not being found.
>> +	 */
>> +	apb_rst = devm_reset_control_get(dev, "apb");
>> +	if (IS_ERR(apb_rst)) {
>> +		ret = PTR_ERR(apb_rst);
>> +		if (ret == -ENOENT) {
>> +			apb_rst = NULL;
>> +		} else {
>> +			dev_err(dev, "Unable to get reset control: %d\n", ret);
>> +			return ERR_PTR(ret);
>> +		}
>> +	}
>> +
>> +	if (apb_rst) {
>> +		ret = clk_prepare_enable(dsi->pclk);
>> +		if (ret) {
>> +			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
>> +			return ERR_PTR(ret);
>> +		}
>> +
>> +		reset_control_assert(apb_rst);
>> +		usleep_range(10, 20);
>> +		reset_control_deassert(apb_rst);
>> +
>> +		clk_disable(dsi->pclk);
>> +	}
>> +
>> +	ret = clk_prepare_enable(dsi->pllref_clk);
>> +	if (ret) {
>> +		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
>> +		return ERR_PTR(ret);
>> +	}
>> +
>> +	pm_runtime_enable(dev);
>> +
>> +	dsi->dsi_host.ops = &dw_mipi_dsi_host_ops;
>> +	dsi->dsi_host.dev = dev;
>> +	ret = mipi_dsi_host_register(&dsi->dsi_host);
>> +	if (ret) {
>> +		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
>> +		goto err_cleanup;
>> +	}
>> +
>> +	dsi->bridge.driver_private = dsi;
>> +	dsi->bridge.funcs = &dw_mipi_dsi_bridge_funcs;
>> +#ifdef CONFIG_OF
>> +	dsi->bridge.of_node = pdev->dev.of_node;
>> +#endif
>> +
>> +	clk_enable(dsi->pclk);
>> +
>> +	dev_set_drvdata(dev, dsi);
>> +
>> +	return dsi;
>> +
>> +err_cleanup:
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +
>> +	return ERR_PTR(ret);
>> +}
>> +
>> +static void __dw_mipi_dsi_remove(struct dw_mipi_dsi *dsi)
>> +{
>> +	pm_runtime_disable(dsi->dev);
>> +	clk_disable_unprepare(dsi->pllref_clk);
>> +}
>> +
>> +/*
>> + * Probe/remove API, used from platforms based on the DRM bridge API.
>> + */
>> +int dw_mipi_dsi_probe(struct platform_device *pdev,
>> +		      const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_add(&dsi->bridge);
>> +	if (ret < 0) {
>> +		__dw_mipi_dsi_remove(dsi);
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_probe);
>> +
>> +void dw_mipi_dsi_remove(struct platform_device *pdev)
>> +{
>> +	struct dw_mipi_dsi *dsi = platform_get_drvdata(pdev);
>> +
>> +	mipi_dsi_host_unregister(&dsi->dsi_host);
>> +	drm_bridge_remove(&dsi->bridge);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_remove);
>> +
>> +/*
>> + * Bind/unbind API, used from platforms based on the component framework.
>> + */
>> +int dw_mipi_dsi_bind(struct platform_device *pdev, struct drm_encoder *encoder,
>> +		     const struct dw_mipi_dsi_plat_data *plat_data)
>> +{
>> +	struct dw_mipi_dsi *dsi;
>> +	int ret;
>> +
>> +	dsi = __dw_mipi_dsi_probe(pdev, plat_data);
>> +	if (IS_ERR(dsi))
>> +		return PTR_ERR(dsi);
>> +
>> +	ret = drm_bridge_attach(encoder, &dsi->bridge, NULL);
>> +	if (ret) {
>> +		dw_mipi_dsi_remove(pdev);
>> +		DRM_ERROR("Failed to initialize bridge with drm\n");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_bind);
>> +
>> +void dw_mipi_dsi_unbind(struct device *dev)
>> +{
>> +	struct dw_mipi_dsi *dsi = dev_get_drvdata(dev);
>> +
>> +	__dw_mipi_dsi_remove(dsi);
>> +}
>> +EXPORT_SYMBOL_GPL(dw_mipi_dsi_unbind);
>> +
>> +MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
>> +MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
>> +MODULE_DESCRIPTION("DW MIPI DSI host controller driver");
>> +MODULE_LICENSE("GPL");
>> +MODULE_ALIAS("platform:dw-mipi-dsi");
>>
>