[PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Baolin Wang]

In some scenarios, we should set some pins as input/output/pullup/pulldown
when the specified system goes into deep sleep mode, then when the system
goes into deep sleep mode, these pins will be set automatically by hardware.

That means some pins are not controlled by any specific driver in the OS, but
need to be controlled when entering sleep mode. Thus we introduce one sleep
state config into pinconf-generic for users to configure.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
---
Changes since v4:
 - Add sleep-hardware-state config to indicate sleep related configs.
---
 .../bindings/pinctrl/pinctrl-bindings.txt          |    2 ++
 drivers/pinctrl/pinconf-generic.c                  |    2 ++
 include/linux/pinctrl/pinconf-generic.h            |    2 ++
 3 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index bf3f7b0..2365a21 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -236,6 +236,8 @@ low-power-enable	- enable low power mode
 low-power-disable	- disable low power mode
 output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
+sleep-hardware-state	- indicate this is sleep related state which will be programmed
+			  into the registers for the sleep state.
 slew-rate		- set the slew rate
 
 For example:
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index ce3335a..9a7f168 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -46,6 +46,7 @@
 	PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
 	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
+	PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
 	PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
 };
 
@@ -175,6 +176,7 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 	{ "output-high", PIN_CONFIG_OUTPUT, 1, },
 	{ "output-low", PIN_CONFIG_OUTPUT, 0, },
 	{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
+	{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
 	{ "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
 };
 
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 7620eb1..a5d0fb4 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -80,6 +80,7 @@
  * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
  *	supplies, the argument to this parameter (on a custom format) tells
  *	the driver which alternative power source to use.
+ * @PIN_CONFIG_SLEEP_HARDWARE_STATE: indicate this is sleep related state.
  * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
  *	this parameter (on a custom format) tells the driver which alternative
  *	slew rate to use.
@@ -107,6 +108,7 @@ enum pin_config_param {
 	PIN_CONFIG_LOW_POWER_MODE,
 	PIN_CONFIG_OUTPUT,
 	PIN_CONFIG_POWER_SOURCE,
+	PIN_CONFIG_SLEEP_HARDWARE_STATE,
 	PIN_CONFIG_SLEW_RATE,
 	PIN_CONFIG_END = 0x7F,
 	PIN_CONFIG_MAX = 0xFF,
-- 
1.7.9.5

[PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Baolin Wang]

In some scenarios, we should set some pins as input/output/pullup/pulldown
when the specified system goes into deep sleep mode, then when the system
goes into deep sleep mode, these pins will be set automatically by hardware.

That means some pins are not controlled by any specific driver in the OS, but
need to be controlled when entering sleep mode. Thus we introduce one sleep
state config into pinconf-generic for users to configure.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
---
Changes since v4:
 - Add sleep-hardware-state config to indicate sleep related configs.
---
 .../bindings/pinctrl/pinctrl-bindings.txt          |    2 ++
 drivers/pinctrl/pinconf-generic.c                  |    2 ++
 include/linux/pinctrl/pinconf-generic.h            |    2 ++
 3 files changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index bf3f7b0..2365a21 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -236,6 +236,8 @@ low-power-enable	- enable low power mode
 low-power-disable	- disable low power mode
 output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
+sleep-hardware-state	- indicate this is sleep related state which will be programmed
+			  into the registers for the sleep state.
 slew-rate		- set the slew rate
 
 For example:
diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
index ce3335a..9a7f168 100644
--- a/drivers/pinctrl/pinconf-generic.c
+++ b/drivers/pinctrl/pinconf-generic.c
@@ -46,6 +46,7 @@
 	PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
 	PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
 	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
+	PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
 	PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
 };
 
@@ -175,6 +176,7 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
 	{ "output-high", PIN_CONFIG_OUTPUT, 1, },
 	{ "output-low", PIN_CONFIG_OUTPUT, 0, },
 	{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
+	{ "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
 	{ "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
 };
 
diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 7620eb1..a5d0fb4 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -80,6 +80,7 @@
  * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
  *	supplies, the argument to this parameter (on a custom format) tells
  *	the driver which alternative power source to use.
+ * @PIN_CONFIG_SLEEP_HARDWARE_STATE: indicate this is sleep related state.
  * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
  *	this parameter (on a custom format) tells the driver which alternative
  *	slew rate to use.
@@ -107,6 +108,7 @@ enum pin_config_param {
 	PIN_CONFIG_LOW_POWER_MODE,
 	PIN_CONFIG_OUTPUT,
 	PIN_CONFIG_POWER_SOURCE,
+	PIN_CONFIG_SLEEP_HARDWARE_STATE,
 	PIN_CONFIG_SLEW_RATE,
 	PIN_CONFIG_END = 0x7F,
 	PIN_CONFIG_MAX = 0xFF,
-- 
1.7.9.5

[PATCH v5 2/3] dt-bindings: pinctrl: Add Spreadtrum SC9860 pin controller

[Baolin Wang]

This patch adds the binding documentation for Spreadtrum SC9860 pin
controller device.

Signed-off-by: Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
---
Changes since v4:
 - Remove these sleep related configs and only introduce one sleep
   state config to indicate this is sleep state.

Changes since v3:
 - Use generic "bias-pull-up" instead of "sprd,pull-up".
 - Change subject name.
 - Use generic sleep related config.
 - Add more explanation for sleep related configuration and sleep mode.

Changes since v2:
 - No updates.

Changes since v1:
 - Remove magic numbers and get to use the standard bindings.
 - Fix some typos.
---
 .../devicetree/bindings/pinctrl/sprd,pinctrl.txt   |   83 ++++++++++++++++++++
 .../bindings/pinctrl/sprd,sc9860-pinctrl.txt       |   70 +++++++++++++++++
 2 files changed, 153 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
new file mode 100644
index 0000000..b1cea7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
@@ -0,0 +1,83 @@
+* Spreadtrum Pin Controller
+
+The Spreadtrum pin controller are organized in 3 blocks (types).
+
+The first block comprises some global control registers, and each
+register contains several bit fields with one bit or several bits
+to configure for some global common configuration, such as domain
+pad driving level, system control select and so on ("domain pad
+driving level": One pin can output 3.0v or 1.8v, depending on the
+related domain pad driving selection, if the related domain pad
+slect 3.0v, then the pin can output 3.0v. "system control" is used
+to choose one function (like: UART0) for which system, since we
+have several systems (AP/CP/CM4) on one SoC.).
+
+There are too much various configuration that we can not list all
+of them, so we can not make every Spreadtrum-special configuration
+as one generic configuration, and maybe it will add more strange
+global configuration in future. Then we add one "sprd,control" to
+set these various global control configuration, and we need use
+magic number for this property.
+
+Moreover we recognise every fields comprising one bit or several
+bits in one global control register as one pin, thus we should
+record every pin's bit offset, bit width and register offset to
+configure this field (pin).
+
+The second block comprises some common registers which have unified
+register definition, and each register described one pin is used
+to configure the pin sleep mode, function select and sleep related
+configuration.
+
+Now we have 4 systems for sleep mode on SC9860 SoC: AP system,
+PUBCP system, TGLDSP system and AGDSP system. And the pin sleep
+related configuration are:
+- input-enable
+- input-disable
+- output-high
+- output-low
+- bias-pull-up
+- bias-pull-down
+
+In some situation we need set the pin sleep mode and pin sleep related
+configuration, to set the pin sleep related configuration automatically
+by hardware when the system specified by sleep mode goes into deep
+sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP
+and set the pin sleep related configuration as "input-enable", which
+means when PUBCP system goes into deep sleep mode, this pin will be set
+input enable automatically.
+
+Moreover we can not use the "sleep" state, since some systems (like:
+PUBCP system) do not run linux kernel OS (only AP system run linux
+kernel on SC9860 platform), then we can not select "sleep" state
+when the PUBCP system goes into deep sleep mode. Thus we introduce
+"sprd,sleep-mode" property to set pin sleep mode.
+
+The last block comprises some misc registers which also have unified
+register definition, and each register described one pin is used to
+configure drive strength, pull up/down and so on. Especially for pull
+up, we have two kind pull up resistor: 20K and 4.7K.
+
+Required properties for Spreadtrum pin controller:
+- compatible: "sprd,<soc>-pinctrl"
+  Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs.
+- reg: The register address of pin controller device.
+- pins : An array of pin names.
+
+Optional properties:
+- function: Specified the function name.
+- drive-strength: Drive strength in mA.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Sleep mode selection.
+
+Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values.
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
new file mode 100644
index 0000000..745845c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
@@ -0,0 +1,70 @@
+* Spreadtrum SC9860 Pin Controller
+
+Please refer to sprd,pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: Must be "sprd,sc9860-pinctrl".
+- reg: The register address of pin controller device.
+- pins : An array of strings, each string containing the name of a pin.
+
+Optional properties:
+- function: A string containing the name of the function, values must be
+  one of: "func1", "func2", "func3" and "func4".
+- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
+  12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor
+  is 20K and 4700 for pull-up resistor is 4.7K.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Choose the pin sleep mode, and supported values are:
+  AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP.
+
+Pin sleep mode definition:
+enum pin_sleep_mode {
+	AP_SLEEP = BIT(0),
+	PUBCP_SLEEP = BIT(1),
+	TGLDSP_SLEEP = BIT(2),
+	AGDSP_SLEEP = BIT(3),
+};
+
+Example:
+pin_controller: pinctrl@402a0000 {
+	compatible = "sprd,sc9860-pinctrl";
+	reg = <0x402a0000 0x10000>;
+
+	grp1: sd0 {
+		pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE";
+		sprd,control = <0x1>;
+	};
+
+	grp2: rfctl_33 {
+		pins = "SC9860_RFCTL33";
+		function = "func2";
+		sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>;
+		grp2_sleep_mode: rfctl_33_sleep {
+			pins = "SC9860_RFCTL33";
+			sleep-hardware-state;
+			output-low;
+		}
+	};
+
+	grp3: rfctl_misc_20 {
+		pins = "SC9860_RFCTL20_MISC";
+		drive-strength = <10>;
+		bias-pull-up = <4700>;
+		grp3_sleep_mode: rfctl_misc_sleep {
+			pins = "SC9860_RFCTL20_MISC";
+			sleep-hardware-state;
+			bias-pull-up;
+		}
+	};
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v5 2/3] dt-bindings: pinctrl: Add Spreadtrum SC9860 pin controller

[Baolin Wang]

This patch adds the binding documentation for Spreadtrum SC9860 pin
controller device.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
---
Changes since v4:
 - Remove these sleep related configs and only introduce one sleep
   state config to indicate this is sleep state.

Changes since v3:
 - Use generic "bias-pull-up" instead of "sprd,pull-up".
 - Change subject name.
 - Use generic sleep related config.
 - Add more explanation for sleep related configuration and sleep mode.

Changes since v2:
 - No updates.

Changes since v1:
 - Remove magic numbers and get to use the standard bindings.
 - Fix some typos.
---
 .../devicetree/bindings/pinctrl/sprd,pinctrl.txt   |   83 ++++++++++++++++++++
 .../bindings/pinctrl/sprd,sc9860-pinctrl.txt       |   70 +++++++++++++++++
 2 files changed, 153 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
new file mode 100644
index 0000000..b1cea7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,pinctrl.txt
@@ -0,0 +1,83 @@
+* Spreadtrum Pin Controller
+
+The Spreadtrum pin controller are organized in 3 blocks (types).
+
+The first block comprises some global control registers, and each
+register contains several bit fields with one bit or several bits
+to configure for some global common configuration, such as domain
+pad driving level, system control select and so on ("domain pad
+driving level": One pin can output 3.0v or 1.8v, depending on the
+related domain pad driving selection, if the related domain pad
+slect 3.0v, then the pin can output 3.0v. "system control" is used
+to choose one function (like: UART0) for which system, since we
+have several systems (AP/CP/CM4) on one SoC.).
+
+There are too much various configuration that we can not list all
+of them, so we can not make every Spreadtrum-special configuration
+as one generic configuration, and maybe it will add more strange
+global configuration in future. Then we add one "sprd,control" to
+set these various global control configuration, and we need use
+magic number for this property.
+
+Moreover we recognise every fields comprising one bit or several
+bits in one global control register as one pin, thus we should
+record every pin's bit offset, bit width and register offset to
+configure this field (pin).
+
+The second block comprises some common registers which have unified
+register definition, and each register described one pin is used
+to configure the pin sleep mode, function select and sleep related
+configuration.
+
+Now we have 4 systems for sleep mode on SC9860 SoC: AP system,
+PUBCP system, TGLDSP system and AGDSP system. And the pin sleep
+related configuration are:
+- input-enable
+- input-disable
+- output-high
+- output-low
+- bias-pull-up
+- bias-pull-down
+
+In some situation we need set the pin sleep mode and pin sleep related
+configuration, to set the pin sleep related configuration automatically
+by hardware when the system specified by sleep mode goes into deep
+sleep mode. For example, if we set the pin sleep mode as PUBCP_SLEEP
+and set the pin sleep related configuration as "input-enable", which
+means when PUBCP system goes into deep sleep mode, this pin will be set
+input enable automatically.
+
+Moreover we can not use the "sleep" state, since some systems (like:
+PUBCP system) do not run linux kernel OS (only AP system run linux
+kernel on SC9860 platform), then we can not select "sleep" state
+when the PUBCP system goes into deep sleep mode. Thus we introduce
+"sprd,sleep-mode" property to set pin sleep mode.
+
+The last block comprises some misc registers which also have unified
+register definition, and each register described one pin is used to
+configure drive strength, pull up/down and so on. Especially for pull
+up, we have two kind pull up resistor: 20K and 4.7K.
+
+Required properties for Spreadtrum pin controller:
+- compatible: "sprd,<soc>-pinctrl"
+  Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported SoCs.
+- reg: The register address of pin controller device.
+- pins : An array of pin names.
+
+Optional properties:
+- function: Specified the function name.
+- drive-strength: Drive strength in mA.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Sleep mode selection.
+
+Please refer to each sprd,<soc>-pinctrl.txt binding doc for supported values.
diff --git a/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
new file mode 100644
index 0000000..745845c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/sprd,sc9860-pinctrl.txt
@@ -0,0 +1,70 @@
+* Spreadtrum SC9860 Pin Controller
+
+Please refer to sprd,pinctrl.txt in this directory for common binding part
+and usage.
+
+Required properties:
+- compatible: Must be "sprd,sc9860-pinctrl".
+- reg: The register address of pin controller device.
+- pins : An array of strings, each string containing the name of a pin.
+
+Optional properties:
+- function: A string containing the name of the function, values must be
+  one of: "func1", "func2", "func3" and "func4".
+- drive-strength: Drive strength in mA. Supported values: 2, 4, 6, 8, 10,
+  12, 14, 16, 20, 21, 24, 25, 27, 29, 31 and 33.
+- input-schmitt-disable: Enable schmitt-trigger mode.
+- input-schmitt-enable: Disable schmitt-trigger mode.
+- bias-disable: Disable pin bias.
+- bias-pull-down: Pull down on pin.
+- bias-pull-up: Pull up on pin. Supported values: 20000 for pull-up resistor
+  is 20K and 4700 for pull-up resistor is 4.7K.
+- input-enable: Enable pin input.
+- input-disable: Enable pin output.
+- output-high: Set the pin as an output level high.
+- output-low: Set the pin as an output level low.
+- sleep-hardware-state: Indicate these configs in this state are sleep related.
+- sprd,control: Control values referring to databook for global control pins.
+- sprd,sleep-mode: Choose the pin sleep mode, and supported values are:
+  AP_SLEEP, PUBCP_SLEEP, TGLDSP_SLEEP and AGDSP_SLEEP.
+
+Pin sleep mode definition:
+enum pin_sleep_mode {
+	AP_SLEEP = BIT(0),
+	PUBCP_SLEEP = BIT(1),
+	TGLDSP_SLEEP = BIT(2),
+	AGDSP_SLEEP = BIT(3),
+};
+
+Example:
+pin_controller: pinctrl@402a0000 {
+	compatible = "sprd,sc9860-pinctrl";
+	reg = <0x402a0000 0x10000>;
+
+	grp1: sd0 {
+		pins = "SC9860_VIO_SD2_IRTE", "SC9860_VIO_SD0_IRTE";
+		sprd,control = <0x1>;
+	};
+
+	grp2: rfctl_33 {
+		pins = "SC9860_RFCTL33";
+		function = "func2";
+		sprd,sleep-mode = <AP_SLEEP | PUBCP_SLEEP>;
+		grp2_sleep_mode: rfctl_33_sleep {
+			pins = "SC9860_RFCTL33";
+			sleep-hardware-state;
+			output-low;
+		}
+	};
+
+	grp3: rfctl_misc_20 {
+		pins = "SC9860_RFCTL20_MISC";
+		drive-strength = <10>;
+		bias-pull-up = <4700>;
+		grp3_sleep_mode: rfctl_misc_sleep {
+			pins = "SC9860_RFCTL20_MISC";
+			sleep-hardware-state;
+			bias-pull-up;
+		}
+	};
+};
-- 
1.7.9.5

[PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[Baolin Wang]

This patch adds the pin control driver for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
---
Changes since v4:
 - Remove sleep configs.
 - Use one standard sleep hardware state config to indicate sleep configs.

Changes since v3:
 - Use the generic "bia-pull-up" config.
 - Use some generic sleep related config.

Changes since v2:
 - Fix some compile warnings.
 - Reimplement the pin_config_get() callback and add debug function.

Changes since v1:
 - Remove magic numbers and use generic pin control bindings.
---
 drivers/pinctrl/Kconfig                    |    1 +
 drivers/pinctrl/Makefile                   |    1 +
 drivers/pinctrl/sprd/Kconfig               |   17 +
 drivers/pinctrl/sprd/Makefile              |    2 +
 drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c |  972 ++++++++++++++++++++++++
 drivers/pinctrl/sprd/pinctrl-sprd.c        | 1113 ++++++++++++++++++++++++++++
 drivers/pinctrl/sprd/pinctrl-sprd.h        |   67 ++
 7 files changed, 2173 insertions(+)
 create mode 100644 drivers/pinctrl/sprd/Kconfig
 create mode 100644 drivers/pinctrl/sprd/Makefile
 create mode 100644 drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
 create mode 100644 drivers/pinctrl/sprd/pinctrl-sprd.c
 create mode 100644 drivers/pinctrl/sprd/pinctrl-sprd.h

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8f8c2af..681e593 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -304,6 +304,7 @@ source "drivers/pinctrl/ti/Kconfig"
 source "drivers/pinctrl/uniphier/Kconfig"
 source "drivers/pinctrl/vt8500/Kconfig"
 source "drivers/pinctrl/mediatek/Kconfig"
+source "drivers/pinctrl/sprd/Kconfig"
 
 config PINCTRL_XWAY
 	bool
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index a251f43..006e352 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -57,3 +57,4 @@ obj-y				+= ti/
 obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
 obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
 obj-$(CONFIG_PINCTRL_MTK)	+= mediatek/
+obj-y				+= sprd/
diff --git a/drivers/pinctrl/sprd/Kconfig b/drivers/pinctrl/sprd/Kconfig
new file mode 100644
index 0000000..6f4a7f9
--- /dev/null
+++ b/drivers/pinctrl/sprd/Kconfig
@@ -0,0 +1,17 @@
+#
+# Spreadtrum pin control drivers
+#
+
+config PINCTRL_SPRD
+	bool "Spreadtrum pinctrl driver"
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GENERIC_PINMUX_FUNCTIONS
+	help
+	  Say Y here to enable Spreadtrum pinctrl driver
+
+config PINCTRL_SPRD_SC9860
+	bool "Spreadtrum SC9860 pinctrl driver"
+	help
+	  Say Y here to enable Spreadtrum SC9860 pinctrl driver
diff --git a/drivers/pinctrl/sprd/Makefile b/drivers/pinctrl/sprd/Makefile
new file mode 100644
index 0000000..b6caa8c
--- /dev/null
+++ b/drivers/pinctrl/sprd/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PINCTRL_SPRD)		+= pinctrl-sprd.o
+obj-$(CONFIG_PINCTRL_SPRD_SC9860)	+= pinctrl-sprd-sc9860.o
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
new file mode 100644
index 0000000..3cdad8b
--- /dev/null
+++ b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
@@ -0,0 +1,972 @@
+/*
+ * Spreadtrum pin controller driver
+ * Copyright (C) 2017 Spreadtrum  - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-sprd.h"
+
+enum sprd_sc9860_pins {
+	/* pin global control register 0 */
+	SC9860_VIO28_0_IRTE = SPRD_PIN_INFO(0, GLOBAL_CTRL_PIN, 11, 1, 0),
+	SC9860_VIO_SD2_IRTE = SPRD_PIN_INFO(1, GLOBAL_CTRL_PIN, 10, 1, 0),
+	SC9860_VIO_SD0_IRTE = SPRD_PIN_INFO(2, GLOBAL_CTRL_PIN, 9, 1, 0),
+	SC9860_VIO_SIM2_IRTE = SPRD_PIN_INFO(3, GLOBAL_CTRL_PIN, 8, 1, 0),
+	SC9860_VIO_SIM1_IRTE = SPRD_PIN_INFO(4, GLOBAL_CTRL_PIN, 7, 1, 0),
+	SC9860_VIO_SIM0_IRTE = SPRD_PIN_INFO(5, GLOBAL_CTRL_PIN, 6, 1, 0),
+	SC9860_VIO28_0_MS = SPRD_PIN_INFO(6, GLOBAL_CTRL_PIN, 5, 1, 0),
+	SC9860_VIO_SD2_MS = SPRD_PIN_INFO(7, GLOBAL_CTRL_PIN, 4, 1, 0),
+	SC9860_VIO_SD0_MS = SPRD_PIN_INFO(8, GLOBAL_CTRL_PIN, 3, 1, 0),
+	SC9860_VIO_SIM2_MS = SPRD_PIN_INFO(9, GLOBAL_CTRL_PIN, 2, 1, 0),
+	SC9860_VIO_SIM1_MS = SPRD_PIN_INFO(10, GLOBAL_CTRL_PIN, 1, 1, 0),
+	SC9860_VIO_SIM0_MS = SPRD_PIN_INFO(11, GLOBAL_CTRL_PIN, 0, 1, 0),
+
+	/* pin global control register 2 */
+	SC9860_SPSPI_PIN_IN_SEL = SPRD_PIN_INFO(12, GLOBAL_CTRL_PIN, 31, 1, 2),
+	SC9860_UART1_USB30_PHY_SEL = SPRD_PIN_INFO(13, GLOBAL_CTRL_PIN, 30, 1, 2),
+	SC9860_USB30_PHY_DM_OE = SPRD_PIN_INFO(14, GLOBAL_CTRL_PIN, 29, 1, 2),
+	SC9860_USB30_PHY_DP_OE = SPRD_PIN_INFO(15, GLOBAL_CTRL_PIN, 28, 1, 2),
+	SC9860_UART5_SYS_SEL = SPRD_PIN_INFO(16, GLOBAL_CTRL_PIN, 25, 3, 2),
+	SC9860_ORP_URXD_PIN_IN_SEL = SPRD_PIN_INFO(17, GLOBAL_CTRL_PIN, 24, 1, 2),
+	SC9860_SIM2_SYS_SEL = SPRD_PIN_INFO(18, GLOBAL_CTRL_PIN, 23, 1, 2),
+	SC9860_SIM1_SYS_SEL = SPRD_PIN_INFO(19, GLOBAL_CTRL_PIN, 22, 1, 2),
+	SC9860_SIM0_SYS_SEL = SPRD_PIN_INFO(20, GLOBAL_CTRL_PIN, 21, 1, 2),
+	SC9860_CLK26MHZ_BUF_OUT_SEL = SPRD_PIN_INFO(21, GLOBAL_CTRL_PIN, 20, 1, 2),
+	SC9860_UART4_SYS_SEL = SPRD_PIN_INFO(22, GLOBAL_CTRL_PIN, 16, 3, 2),
+	SC9860_UART3_SYS_SEL = SPRD_PIN_INFO(23, GLOBAL_CTRL_PIN, 13, 3, 2),
+	SC9860_UART2_SYS_SEL = SPRD_PIN_INFO(24, GLOBAL_CTRL_PIN, 10, 3, 2),
+	SC9860_UART1_SYS_SEL = SPRD_PIN_INFO(25, GLOBAL_CTRL_PIN, 7, 3, 2),
+	SC9860_UART0_SYS_SEL = SPRD_PIN_INFO(26, GLOBAL_CTRL_PIN, 4, 3, 2),
+	SC9860_UART24_LOOP_SEL = SPRD_PIN_INFO(27, GLOBAL_CTRL_PIN, 3, 1, 2),
+	SC9860_UART23_LOOP_SEL = SPRD_PIN_INFO(28, GLOBAL_CTRL_PIN, 2, 1, 2),
+	SC9860_UART14_LOOP_SEL = SPRD_PIN_INFO(29, GLOBAL_CTRL_PIN, 1, 1, 2),
+	SC9860_UART13_LOOP_SEL = SPRD_PIN_INFO(30, GLOBAL_CTRL_PIN, 0, 1, 2),
+
+	/* pin global control register 3 */
+	SC9860_IIS3_SYS_SEL = SPRD_PIN_INFO(31, GLOBAL_CTRL_PIN, 18, 4, 3),
+	SC9860_IIS2_SYS_SEL = SPRD_PIN_INFO(32, GLOBAL_CTRL_PIN, 14, 4, 3),
+	SC9860_IIS1_SYS_SEL = SPRD_PIN_INFO(33, GLOBAL_CTRL_PIN, 10, 4, 3),
+	SC9860_IIS0_SYS_SEL = SPRD_PIN_INFO(34, GLOBAL_CTRL_PIN, 6, 4, 3),
+	SC9860_IIS23_LOOP_SEL = SPRD_PIN_INFO(35, GLOBAL_CTRL_PIN, 5, 1, 3),
+	SC9860_IIS13_LOOP_SEL = SPRD_PIN_INFO(36, GLOBAL_CTRL_PIN, 4, 1, 3),
+	SC9860_IIS12_LOOP_SEL = SPRD_PIN_INFO(37, GLOBAL_CTRL_PIN, 3, 1, 3),
+	SC9860_IIS03_LOOP_SEL = SPRD_PIN_INFO(38, GLOBAL_CTRL_PIN, 2, 1, 3),
+	SC9860_IIS02_LOOP_SEL = SPRD_PIN_INFO(39, GLOBAL_CTRL_PIN, 1, 1, 3),
+	SC9860_IIS01_LOOP_SEL = SPRD_PIN_INFO(40, GLOBAL_CTRL_PIN, 0, 1, 3),
+
+	/* pin global control register 4 */
+	SC9860_IIS6_SYS_SEL = SPRD_PIN_INFO(41, GLOBAL_CTRL_PIN, 27, 4, 4),
+	SC9860_IIS5_SYS_SEL = SPRD_PIN_INFO(42, GLOBAL_CTRL_PIN, 23, 4, 4),
+	SC9860_IIS4_SYS_SEL = SPRD_PIN_INFO(43, GLOBAL_CTRL_PIN, 19, 4, 4),
+	SC9860_I2C_INF6_SYS_SEL = SPRD_PIN_INFO(44, GLOBAL_CTRL_PIN, 8, 2, 4),
+	SC9860_I2C_INF4_SYS_SEL = SPRD_PIN_INFO(45, GLOBAL_CTRL_PIN, 6, 2, 4),
+	SC9860_I2C_INF2_SYS_SEL = SPRD_PIN_INFO(46, GLOBAL_CTRL_PIN, 4, 2, 4),
+	SC9860_I2C_INF1_SYS_SEL = SPRD_PIN_INFO(47, GLOBAL_CTRL_PIN, 2, 2, 4),
+	SC9860_I2C_INF0_SYS_SEL = SPRD_PIN_INFO(48, GLOBAL_CTRL_PIN, 0, 2, 4),
+
+	/* pin global control register 5 */
+	SC9860_GPIO_INF7_SYS_SEL = SPRD_PIN_INFO(49, GLOBAL_CTRL_PIN, 27, 1, 5),
+	SC9860_GPIO_INF6_SYS_SEL = SPRD_PIN_INFO(50, GLOBAL_CTRL_PIN, 26, 1, 5),
+	SC9860_GPIO_INF5_SYS_SEL = SPRD_PIN_INFO(51, GLOBAL_CTRL_PIN, 25, 1, 5),
+	SC9860_GPIO_INF4_SYS_SEL = SPRD_PIN_INFO(52, GLOBAL_CTRL_PIN, 24, 1, 5),
+	SC9860_GPIO_INF3_SYS_SEL = SPRD_PIN_INFO(53, GLOBAL_CTRL_PIN, 23, 1, 5),
+	SC9860_GPIO_INF2_SYS_SEL = SPRD_PIN_INFO(54, GLOBAL_CTRL_PIN, 22, 1, 5),
+	SC9860_GPIO_INF1_SYS_SEL = SPRD_PIN_INFO(55, GLOBAL_CTRL_PIN, 21, 1, 5),
+	SC9860_GPIO_INF0_SYS_SEL = SPRD_PIN_INFO(56, GLOBAL_CTRL_PIN, 20, 1, 5),
+	SC9860_WDRST_OUT_SEL = SPRD_PIN_INFO(57, GLOBAL_CTRL_PIN, 16, 3, 5),
+	SC9860_ADI_SYNC_PIN_OUT_SEL = SPRD_PIN_INFO(58, GLOBAL_CTRL_PIN, 14, 1, 5),
+	SC9860_CMRST_SEL = SPRD_PIN_INFO(59, GLOBAL_CTRL_PIN, 13, 1, 5),
+	SC9860_CMPD_SEL = SPRD_PIN_INFO(60, GLOBAL_CTRL_PIN, 12, 1, 5),
+	SC9860_TEST_DBG_MODE11 = SPRD_PIN_INFO(61, GLOBAL_CTRL_PIN, 11, 1, 5),
+	SC9860_TEST_DBG_MODE10 = SPRD_PIN_INFO(62, GLOBAL_CTRL_PIN, 10, 1, 5),
+	SC9860_TEST_DBG_MODE9 = SPRD_PIN_INFO(63, GLOBAL_CTRL_PIN, 9, 1, 5),
+	SC9860_TEST_DBG_MODE8 = SPRD_PIN_INFO(64, GLOBAL_CTRL_PIN, 8, 1, 5),
+	SC9860_TEST_DBG_MODE7 = SPRD_PIN_INFO(65, GLOBAL_CTRL_PIN, 7, 1, 5),
+	SC9860_TEST_DBG_MODE6 = SPRD_PIN_INFO(66, GLOBAL_CTRL_PIN, 6, 1, 5),
+	SC9860_TEST_DBG_MODE5 = SPRD_PIN_INFO(67, GLOBAL_CTRL_PIN, 5, 1, 5),
+	SC9860_TEST_DBG_MODE4 = SPRD_PIN_INFO(68, GLOBAL_CTRL_PIN, 4, 1, 5),
+	SC9860_TEST_DBG_MODE3 = SPRD_PIN_INFO(69, GLOBAL_CTRL_PIN, 3, 1, 5),
+	SC9860_TEST_DBG_MODE2 = SPRD_PIN_INFO(70, GLOBAL_CTRL_PIN, 2, 1, 5),
+	SC9860_TEST_DBG_MODE1 = SPRD_PIN_INFO(71, GLOBAL_CTRL_PIN, 1, 1, 5),
+	SC9860_TEST_DBG_MODE0 = SPRD_PIN_INFO(72, GLOBAL_CTRL_PIN, 0, 1, 5),
+
+	/* pin global control register 6 */
+	SC9860_SP_EIC_DPAD3_SEL = SPRD_PIN_INFO(73, GLOBAL_CTRL_PIN, 24, 8, 6),
+	SC9860_SP_EIC_DPAD2_SEL = SPRD_PIN_INFO(74, GLOBAL_CTRL_PIN, 16, 8, 6),
+	SC9860_SP_EIC_DPAD1_SEL = SPRD_PIN_INFO(75, GLOBAL_CTRL_PIN, 8, 8, 6),
+	SC9860_SP_EIC_DPAD0_SEL = SPRD_PIN_INFO(76, GLOBAL_CTRL_PIN, 0, 8, 6),
+
+	/* pin global control register 7 */
+	SC9860_SP_EIC_DPAD7_SEL = SPRD_PIN_INFO(77, GLOBAL_CTRL_PIN, 24, 8, 7),
+	SC9860_SP_EIC_DPAD6_SEL = SPRD_PIN_INFO(78, GLOBAL_CTRL_PIN, 16, 8, 7),
+	SC9860_SP_EIC_DPAD5_SEL = SPRD_PIN_INFO(79, GLOBAL_CTRL_PIN, 8, 8, 7),
+	SC9860_SP_EIC_DPAD4_SEL = SPRD_PIN_INFO(80, GLOBAL_CTRL_PIN, 0, 8, 7),
+
+	/* common pin registers definitions */
+	SC9860_RFCTL20 = SPRD_PIN_INFO(81, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL21 = SPRD_PIN_INFO(83, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL30 = SPRD_PIN_INFO(85, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL31 = SPRD_PIN_INFO(87, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL32 = SPRD_PIN_INFO(89, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL33 = SPRD_PIN_INFO(91, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL34 = SPRD_PIN_INFO(93, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL35 = SPRD_PIN_INFO(95, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL36 = SPRD_PIN_INFO(97, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL37 = SPRD_PIN_INFO(99, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL22 = SPRD_PIN_INFO(101, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL23 = SPRD_PIN_INFO(103, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL24 = SPRD_PIN_INFO(105, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL25 = SPRD_PIN_INFO(107, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL26 = SPRD_PIN_INFO(109, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL27 = SPRD_PIN_INFO(111, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL28 = SPRD_PIN_INFO(113, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL29 = SPRD_PIN_INFO(115, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL2 = SPRD_PIN_INFO(117, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA2 = SPRD_PIN_INFO(119, COMMON_PIN, 0, 0, 0),
+	SC9860_MTCK_ARM = SPRD_PIN_INFO(121, COMMON_PIN, 0, 0, 0),
+	SC9860_MTMS_ARM = SPRD_PIN_INFO(123, COMMON_PIN, 0, 0, 0),
+	SC9860_XTL_EN0 = SPRD_PIN_INFO(125, COMMON_PIN, 0, 0, 0),
+	SC9860_PTEST = SPRD_PIN_INFO(127, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_DAD1 = SPRD_PIN_INFO(129, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_ADD0 = SPRD_PIN_INFO(131, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_ADSYNC = SPRD_PIN_INFO(133, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_SCLK = SPRD_PIN_INFO(135, COMMON_PIN, 0, 0, 0),
+	SC9860_CHIP_SLEEP = SPRD_PIN_INFO(137, COMMON_PIN, 0, 0, 0),
+	SC9860_CLK_32K = SPRD_PIN_INFO(139, COMMON_PIN, 0, 0, 0),
+	SC9860_DCDC_ARM_EN = SPRD_PIN_INFO(141, COMMON_PIN, 0, 0, 0),
+	SC9860_EXT_RST_B = SPRD_PIN_INFO(143, COMMON_PIN, 0, 0, 0),
+	SC9860_ADI_D = SPRD_PIN_INFO(145, COMMON_PIN, 0, 0, 0),
+	SC9860_ADI_SCLK = SPRD_PIN_INFO(147, COMMON_PIN, 0, 0, 0),
+	SC9860_XTL_EN1 = SPRD_PIN_INFO(149, COMMON_PIN, 0, 0, 0),
+	SC9860_ANA_INT = SPRD_PIN_INFO(151, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_DAD0 = SPRD_PIN_INFO(153, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_DASYNC = SPRD_PIN_INFO(155, COMMON_PIN, 0, 0, 0),
+	SC9860_LCM_RSTN = SPRD_PIN_INFO(157, COMMON_PIN, 0, 0, 0),
+	SC9860_DSI_TE = SPRD_PIN_INFO(159, COMMON_PIN, 0, 0, 0),
+	SC9860_PWMA = SPRD_PIN_INFO(161, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT0 = SPRD_PIN_INFO(163, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT1 = SPRD_PIN_INFO(165, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA1 = SPRD_PIN_INFO(167, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL1 = SPRD_PIN_INFO(169, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMCLK2 = SPRD_PIN_INFO(171, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMDA2 = SPRD_PIN_INFO(173, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMRST2 = SPRD_PIN_INFO(175, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMCLK1 = SPRD_PIN_INFO(177, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMDA1 = SPRD_PIN_INFO(179, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMRST1 = SPRD_PIN_INFO(181, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMCLK0 = SPRD_PIN_INFO(183, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMDA0 = SPRD_PIN_INFO(185, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMRST0 = SPRD_PIN_INFO(187, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_CMD = SPRD_PIN_INFO(189, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D0 = SPRD_PIN_INFO(191, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D1 = SPRD_PIN_INFO(193, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_CLK = SPRD_PIN_INFO(195, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D2 = SPRD_PIN_INFO(197, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D3 = SPRD_PIN_INFO(199, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D3 = SPRD_PIN_INFO(201, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D2 = SPRD_PIN_INFO(203, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_CMD = SPRD_PIN_INFO(205, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D0 = SPRD_PIN_INFO(207, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D1 = SPRD_PIN_INFO(209, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_CLK = SPRD_PIN_INFO(211, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD_reserved = SPRD_PIN_INFO(213, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD = SPRD_PIN_INFO(215, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D6 = SPRD_PIN_INFO(217, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D7 = SPRD_PIN_INFO(219, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_CLK = SPRD_PIN_INFO(221, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D5 = SPRD_PIN_INFO(223, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D4 = SPRD_PIN_INFO(225, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_DS = SPRD_PIN_INFO(227, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D3_reserved = SPRD_PIN_INFO(229, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D3 = SPRD_PIN_INFO(231, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_RST = SPRD_PIN_INFO(233, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D1 = SPRD_PIN_INFO(235, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D2 = SPRD_PIN_INFO(237, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D0 = SPRD_PIN_INFO(239, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0DI = SPRD_PIN_INFO(241, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0DO = SPRD_PIN_INFO(243, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0CLK = SPRD_PIN_INFO(245, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0LRCK = SPRD_PIN_INFO(247, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_CLK = SPRD_PIN_INFO(249, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_CMD = SPRD_PIN_INFO(251, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D0 = SPRD_PIN_INFO(253, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D1 = SPRD_PIN_INFO(255, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D2 = SPRD_PIN_INFO(257, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D3 = SPRD_PIN_INFO(259, COMMON_PIN, 0, 0, 0),
+	SC9860_CLK_AUX0 = SPRD_PIN_INFO(261, COMMON_PIN, 0, 0, 0),
+	SC9860_WIFI_COEXIST = SPRD_PIN_INFO(263, COMMON_PIN, 0, 0, 0),
+	SC9860_BEIDOU_COEXIST = SPRD_PIN_INFO(265, COMMON_PIN, 0, 0, 0),
+	SC9860_U3TXD = SPRD_PIN_INFO(267, COMMON_PIN, 0, 0, 0),
+	SC9860_U3RXD = SPRD_PIN_INFO(269, COMMON_PIN, 0, 0, 0),
+	SC9860_U3CTS = SPRD_PIN_INFO(271, COMMON_PIN, 0, 0, 0),
+	SC9860_U3RTS = SPRD_PIN_INFO(273, COMMON_PIN, 0, 0, 0),
+	SC9860_U0TXD = SPRD_PIN_INFO(275, COMMON_PIN, 0, 0, 0),
+	SC9860_U0RXD = SPRD_PIN_INFO(277, COMMON_PIN, 0, 0, 0),
+	SC9860_U0CTS = SPRD_PIN_INFO(279, COMMON_PIN, 0, 0, 0),
+	SC9860_U0RTS = SPRD_PIN_INFO(281, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1DI = SPRD_PIN_INFO(283, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1DO = SPRD_PIN_INFO(285, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1CLK = SPRD_PIN_INFO(287, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1LRCK = SPRD_PIN_INFO(289, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_CSN = SPRD_PIN_INFO(291, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_DO = SPRD_PIN_INFO(293, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_DI = SPRD_PIN_INFO(295, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_CLK = SPRD_PIN_INFO(297, COMMON_PIN, 0, 0, 0),
+	SC9860_U2TXD = SPRD_PIN_INFO(299, COMMON_PIN, 0, 0, 0),
+	SC9860_U2RXD = SPRD_PIN_INFO(301, COMMON_PIN, 0, 0, 0),
+	SC9860_U4TXD = SPRD_PIN_INFO(303, COMMON_PIN, 0, 0, 0),
+	SC9860_U4RXD = SPRD_PIN_INFO(305, COMMON_PIN, 0, 0, 0),
+	SC9860_CMMCLK1 = SPRD_PIN_INFO(307, COMMON_PIN, 0, 0, 0),
+	SC9860_CMRST1 = SPRD_PIN_INFO(309, COMMON_PIN, 0, 0, 0),
+	SC9860_CMMCLK0 = SPRD_PIN_INFO(311, COMMON_PIN, 0, 0, 0),
+	SC9860_CMRST0 = SPRD_PIN_INFO(313, COMMON_PIN, 0, 0, 0),
+	SC9860_CMPD0 = SPRD_PIN_INFO(315, COMMON_PIN, 0, 0, 0),
+	SC9860_CMPD1 = SPRD_PIN_INFO(317, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL0 = SPRD_PIN_INFO(319, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA0 = SPRD_PIN_INFO(321, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA6 = SPRD_PIN_INFO(323, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL6 = SPRD_PIN_INFO(325, COMMON_PIN, 0, 0, 0),
+	SC9860_U1TXD = SPRD_PIN_INFO(327, COMMON_PIN, 0, 0, 0),
+	SC9860_U1RXD = SPRD_PIN_INFO(329, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYOUT0 = SPRD_PIN_INFO(331, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYOUT1 = SPRD_PIN_INFO(333, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYOUT2 = SPRD_PIN_INFO(335, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYIN0 = SPRD_PIN_INFO(337, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYIN1 = SPRD_PIN_INFO(339, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYIN2 = SPRD_PIN_INFO(341, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3DI = SPRD_PIN_INFO(343, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3DO = SPRD_PIN_INFO(345, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3CLK = SPRD_PIN_INFO(347, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3LRCK = SPRD_PIN_INFO(349, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL0 = SPRD_PIN_INFO(351, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL1 = SPRD_PIN_INFO(353, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL10 = SPRD_PIN_INFO(355, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL11 = SPRD_PIN_INFO(357, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL12 = SPRD_PIN_INFO(359, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL13 = SPRD_PIN_INFO(361, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL14 = SPRD_PIN_INFO(363, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL15 = SPRD_PIN_INFO(365, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL16 = SPRD_PIN_INFO(367, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL17 = SPRD_PIN_INFO(369, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL18 = SPRD_PIN_INFO(371, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL19 = SPRD_PIN_INFO(373, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL2 = SPRD_PIN_INFO(375, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT5 = SPRD_PIN_INFO(377, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT6 = SPRD_PIN_INFO(379, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT7 = SPRD_PIN_INFO(381, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO30 = SPRD_PIN_INFO(383, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO31 = SPRD_PIN_INFO(385, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO32 = SPRD_PIN_INFO(387, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO33 = SPRD_PIN_INFO(389, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO34 = SPRD_PIN_INFO(391, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL3 = SPRD_PIN_INFO(393, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL4 = SPRD_PIN_INFO(395, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL5 = SPRD_PIN_INFO(397, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL6 = SPRD_PIN_INFO(399, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL7 = SPRD_PIN_INFO(401, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL8 = SPRD_PIN_INFO(403, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL9 = SPRD_PIN_INFO(405, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE0_SCK0 = SPRD_PIN_INFO(407, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO38 = SPRD_PIN_INFO(409, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE0_SDA0 = SPRD_PIN_INFO(411, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO39 = SPRD_PIN_INFO(413, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE1_SCK0 = SPRD_PIN_INFO(415, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO181 = SPRD_PIN_INFO(417, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE1_SDA0 = SPRD_PIN_INFO(419, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO182 = SPRD_PIN_INFO(421, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_ADC_ON = SPRD_PIN_INFO(423, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_DAC_ON = SPRD_PIN_INFO(425, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSCK0 = SPRD_PIN_INFO(427, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSDA0 = SPRD_PIN_INFO(429, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSEN0 = SPRD_PIN_INFO(431, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_ADC_ON = SPRD_PIN_INFO(433, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_DAC_ON = SPRD_PIN_INFO(435, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSCK1 = SPRD_PIN_INFO(437, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSDA1 = SPRD_PIN_INFO(439, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSEN1 = SPRD_PIN_INFO(441, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL38 = SPRD_PIN_INFO(443, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL39 = SPRD_PIN_INFO(445, COMMON_PIN, 0, 0, 0),
+
+	/* MSIC pin registers definitions */
+	SC9860_RFCTL20_MISC = SPRD_PIN_INFO(82, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL21_MISC = SPRD_PIN_INFO(84, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL30_MISC = SPRD_PIN_INFO(86, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL31_MISC = SPRD_PIN_INFO(88, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL32_MISC = SPRD_PIN_INFO(90, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL33_MISC = SPRD_PIN_INFO(92, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL34_MISC = SPRD_PIN_INFO(94, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL35_MISC = SPRD_PIN_INFO(96, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL36_MISC = SPRD_PIN_INFO(98, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL37_MISC = SPRD_PIN_INFO(100, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL22_MISC = SPRD_PIN_INFO(102, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL23_MISC = SPRD_PIN_INFO(104, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL24_MISC = SPRD_PIN_INFO(106, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL25_MISC = SPRD_PIN_INFO(108, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL26_MISC = SPRD_PIN_INFO(110, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL27_MISC = SPRD_PIN_INFO(112, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL28_MISC = SPRD_PIN_INFO(114, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL29_MISC = SPRD_PIN_INFO(116, MISC_PIN, 0, 0, 0),
+	SC9860_SCL2_MISC = SPRD_PIN_INFO(118, MISC_PIN, 0, 0, 0),
+	SC9860_SDA2_MISC = SPRD_PIN_INFO(120, MISC_PIN, 0, 0, 0),
+	SC9860_MTCK_ARM_MISC = SPRD_PIN_INFO(122, MISC_PIN, 0, 0, 0),
+	SC9860_MTMS_ARM_MISC = SPRD_PIN_INFO(124, MISC_PIN, 0, 0, 0),
+	SC9860_XTL_EN0_MISC = SPRD_PIN_INFO(126, MISC_PIN, 0, 0, 0),
+	SC9860_PTEST_MISC = SPRD_PIN_INFO(128, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_DAD1_MISC = SPRD_PIN_INFO(130, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_ADD0_MISC = SPRD_PIN_INFO(132, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_ADSYNC_MISC = SPRD_PIN_INFO(134, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_SCLK_MISC = SPRD_PIN_INFO(136, MISC_PIN, 0, 0, 0),
+	SC9860_CHIP_SLEEP_MISC = SPRD_PIN_INFO(138, MISC_PIN, 0, 0, 0),
+	SC9860_CLK_32K_MISC = SPRD_PIN_INFO(140, MISC_PIN, 0, 0, 0),
+	SC9860_DCDC_ARM_EN_MISC = SPRD_PIN_INFO(142, MISC_PIN, 0, 0, 0),
+	SC9860_EXT_RST_B_MISC = SPRD_PIN_INFO(144, MISC_PIN, 0, 0, 0),
+	SC9860_ADI_D_MISC = SPRD_PIN_INFO(146, MISC_PIN, 0, 0, 0),
+	SC9860_ADI_SCLK_MISC = SPRD_PIN_INFO(148, MISC_PIN, 0, 0, 0),
+	SC9860_XTL_EN1_MISC = SPRD_PIN_INFO(150, MISC_PIN, 0, 0, 0),
+	SC9860_ANA_INT_MISC = SPRD_PIN_INFO(152, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_DAD0_MISC = SPRD_PIN_INFO(154, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_DASYNC_MISC = SPRD_PIN_INFO(156, MISC_PIN, 0, 0, 0),
+	SC9860_LCM_RSTN_MISC = SPRD_PIN_INFO(158, MISC_PIN, 0, 0, 0),
+	SC9860_DSI_TE_MISC = SPRD_PIN_INFO(160, MISC_PIN, 0, 0, 0),
+	SC9860_PWMA_MISC = SPRD_PIN_INFO(162, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT0_MISC = SPRD_PIN_INFO(164, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT1_MISC = SPRD_PIN_INFO(166, MISC_PIN, 0, 0, 0),
+	SC9860_SDA1_MISC = SPRD_PIN_INFO(168, MISC_PIN, 0, 0, 0),
+	SC9860_SCL1_MISC = SPRD_PIN_INFO(170, MISC_PIN, 0, 0, 0),
+	SC9860_SIMCLK2_MISC = SPRD_PIN_INFO(172, MISC_PIN, 0, 0, 0),
+	SC9860_SIMDA2_MISC = SPRD_PIN_INFO(174, MISC_PIN, 0, 0, 0),
+	SC9860_SIMRST2_MISC = SPRD_PIN_INFO(176, MISC_PIN, 0, 0, 0),
+	SC9860_SIMCLK1_MISC = SPRD_PIN_INFO(178, MISC_PIN, 0, 0, 0),
+	SC9860_SIMDA1_MISC = SPRD_PIN_INFO(180, MISC_PIN, 0, 0, 0),
+	SC9860_SIMRST1_MISC = SPRD_PIN_INFO(182, MISC_PIN, 0, 0, 0),
+	SC9860_SIMCLK0_MISC = SPRD_PIN_INFO(184, MISC_PIN, 0, 0, 0),
+	SC9860_SIMDA0_MISC = SPRD_PIN_INFO(186, MISC_PIN, 0, 0, 0),
+	SC9860_SIMRST0_MISC = SPRD_PIN_INFO(188, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_CMD_MISC = SPRD_PIN_INFO(190, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D0_MISC = SPRD_PIN_INFO(192, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D1_MISC = SPRD_PIN_INFO(194, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_CLK_MISC = SPRD_PIN_INFO(196, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D2_MISC = SPRD_PIN_INFO(198, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D3_MISC = SPRD_PIN_INFO(200, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D3_MISC = SPRD_PIN_INFO(202, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D2_MISC = SPRD_PIN_INFO(204, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_CMD_MISC = SPRD_PIN_INFO(206, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D0_MISC = SPRD_PIN_INFO(208, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D1_MISC = SPRD_PIN_INFO(210, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_CLK_MISC = SPRD_PIN_INFO(212, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD_reserved_MISC = SPRD_PIN_INFO(214, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD_MISC = SPRD_PIN_INFO(216, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D6_MISC = SPRD_PIN_INFO(218, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D7_MISC = SPRD_PIN_INFO(220, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_CLK_MISC = SPRD_PIN_INFO(222, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D5_MISC = SPRD_PIN_INFO(224, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D4_MISC = SPRD_PIN_INFO(226, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_DS_MISC = SPRD_PIN_INFO(228, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D3_reserved_MISC = SPRD_PIN_INFO(230, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D3_MISC = SPRD_PIN_INFO(232, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_RST_MISC = SPRD_PIN_INFO(234, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D1_MISC = SPRD_PIN_INFO(236, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D2_MISC = SPRD_PIN_INFO(238, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D0_MISC = SPRD_PIN_INFO(240, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0DI_MISC = SPRD_PIN_INFO(242, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0DO_MISC = SPRD_PIN_INFO(244, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0CLK_MISC = SPRD_PIN_INFO(246, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0LRCK_MISC = SPRD_PIN_INFO(248, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_CLK_MISC = SPRD_PIN_INFO(250, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_CMD_MISC = SPRD_PIN_INFO(252, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D0_MISC = SPRD_PIN_INFO(254, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D1_MISC = SPRD_PIN_INFO(256, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D2_MISC = SPRD_PIN_INFO(258, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D3_MISC = SPRD_PIN_INFO(260, MISC_PIN, 0, 0, 0),
+	SC9860_CLK_AUX0_MISC = SPRD_PIN_INFO(262, MISC_PIN, 0, 0, 0),
+	SC9860_WIFI_COEXIST_MISC = SPRD_PIN_INFO(264, MISC_PIN, 0, 0, 0),
+	SC9860_BEIDOU_COEXIST_MISC = SPRD_PIN_INFO(266, MISC_PIN, 0, 0, 0),
+	SC9860_U3TXD_MISC = SPRD_PIN_INFO(268, MISC_PIN, 0, 0, 0),
+	SC9860_U3RXD_MISC = SPRD_PIN_INFO(270, MISC_PIN, 0, 0, 0),
+	SC9860_U3CTS_MISC = SPRD_PIN_INFO(272, MISC_PIN, 0, 0, 0),
+	SC9860_U3RTS_MISC = SPRD_PIN_INFO(274, MISC_PIN, 0, 0, 0),
+	SC9860_U0TXD_MISC = SPRD_PIN_INFO(276, MISC_PIN, 0, 0, 0),
+	SC9860_U0RXD_MISC = SPRD_PIN_INFO(278, MISC_PIN, 0, 0, 0),
+	SC9860_U0CTS_MISC = SPRD_PIN_INFO(280, MISC_PIN, 0, 0, 0),
+	SC9860_U0RTS_MISC = SPRD_PIN_INFO(282, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1DI_MISC = SPRD_PIN_INFO(284, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1DO_MISC = SPRD_PIN_INFO(286, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1CLK_MISC = SPRD_PIN_INFO(288, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1LRCK_MISC = SPRD_PIN_INFO(290, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_CSN_MISC = SPRD_PIN_INFO(292, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_DO_MISC = SPRD_PIN_INFO(294, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_DI_MISC = SPRD_PIN_INFO(296, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_CLK_MISC = SPRD_PIN_INFO(298, MISC_PIN, 0, 0, 0),
+	SC9860_U2TXD_MISC = SPRD_PIN_INFO(300, MISC_PIN, 0, 0, 0),
+	SC9860_U2RXD_MISC = SPRD_PIN_INFO(302, MISC_PIN, 0, 0, 0),
+	SC9860_U4TXD_MISC = SPRD_PIN_INFO(304, MISC_PIN, 0, 0, 0),
+	SC9860_U4RXD_MISC = SPRD_PIN_INFO(306, MISC_PIN, 0, 0, 0),
+	SC9860_CMMCLK1_MISC = SPRD_PIN_INFO(308, MISC_PIN, 0, 0, 0),
+	SC9860_CMRST1_MISC = SPRD_PIN_INFO(310, MISC_PIN, 0, 0, 0),
+	SC9860_CMMCLK0_MISC = SPRD_PIN_INFO(312, MISC_PIN, 0, 0, 0),
+	SC9860_CMRST0_MISC = SPRD_PIN_INFO(314, MISC_PIN, 0, 0, 0),
+	SC9860_CMPD0_MISC = SPRD_PIN_INFO(316, MISC_PIN, 0, 0, 0),
+	SC9860_CMPD1_MISC = SPRD_PIN_INFO(318, MISC_PIN, 0, 0, 0),
+	SC9860_SCL0_MISC = SPRD_PIN_INFO(320, MISC_PIN, 0, 0, 0),
+	SC9860_SDA0_MISC = SPRD_PIN_INFO(322, MISC_PIN, 0, 0, 0),
+	SC9860_SDA6_MISC = SPRD_PIN_INFO(324, MISC_PIN, 0, 0, 0),
+	SC9860_SCL6_MISC = SPRD_PIN_INFO(326, MISC_PIN, 0, 0, 0),
+	SC9860_U1TXD_MISC = SPRD_PIN_INFO(328, MISC_PIN, 0, 0, 0),
+	SC9860_U1RXD_MISC = SPRD_PIN_INFO(330, MISC_PIN, 0, 0, 0),
+	SC9860_KEYOUT0_MISC = SPRD_PIN_INFO(332, MISC_PIN, 0, 0, 0),
+	SC9860_KEYOUT1_MISC = SPRD_PIN_INFO(334, MISC_PIN, 0, 0, 0),
+	SC9860_KEYOUT2_MISC = SPRD_PIN_INFO(336, MISC_PIN, 0, 0, 0),
+	SC9860_KEYIN0_MISC = SPRD_PIN_INFO(338, MISC_PIN, 0, 0, 0),
+	SC9860_KEYIN1_MISC = SPRD_PIN_INFO(340, MISC_PIN, 0, 0, 0),
+	SC9860_KEYIN2_MISC = SPRD_PIN_INFO(342, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3DI_MISC = SPRD_PIN_INFO(344, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3DO_MISC = SPRD_PIN_INFO(346, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3CLK_MISC = SPRD_PIN_INFO(348, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3LRCK_MISC = SPRD_PIN_INFO(350, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL0_MISC = SPRD_PIN_INFO(352, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL1_MISC = SPRD_PIN_INFO(354, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL10_MISC = SPRD_PIN_INFO(356, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL11_MISC = SPRD_PIN_INFO(358, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL12_MISC = SPRD_PIN_INFO(360, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL13_MISC = SPRD_PIN_INFO(362, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL14_MISC = SPRD_PIN_INFO(364, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL15_MISC = SPRD_PIN_INFO(366, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL16_MISC = SPRD_PIN_INFO(368, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL17_MISC = SPRD_PIN_INFO(370, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL18_MISC = SPRD_PIN_INFO(372, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL19_MISC = SPRD_PIN_INFO(374, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL2_MISC = SPRD_PIN_INFO(376, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT5_MISC = SPRD_PIN_INFO(378, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT6_MISC = SPRD_PIN_INFO(380, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT7_MISC = SPRD_PIN_INFO(382, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO30_MISC = SPRD_PIN_INFO(384, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO31_MISC = SPRD_PIN_INFO(386, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO32_MISC = SPRD_PIN_INFO(388, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO33_MISC = SPRD_PIN_INFO(390, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO34_MISC = SPRD_PIN_INFO(392, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL3_MISC = SPRD_PIN_INFO(394, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL4_MISC = SPRD_PIN_INFO(396, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL5_MISC = SPRD_PIN_INFO(398, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL6_MISC = SPRD_PIN_INFO(400, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL7_MISC = SPRD_PIN_INFO(402, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL8_MISC = SPRD_PIN_INFO(404, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL9_MISC = SPRD_PIN_INFO(406, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE0_SCK0_MISC = SPRD_PIN_INFO(408, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO38_MISC = SPRD_PIN_INFO(410, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE0_SDA0_MISC = SPRD_PIN_INFO(412, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO39_MISC = SPRD_PIN_INFO(414, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE1_SCK0_MISC = SPRD_PIN_INFO(416, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO181_MISC = SPRD_PIN_INFO(418, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE1_SDA0_MISC = SPRD_PIN_INFO(420, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO182_MISC = SPRD_PIN_INFO(422, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_ADC_ON_MISC = SPRD_PIN_INFO(424, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_DAC_ON_MISC = SPRD_PIN_INFO(426, MISC_PIN, 0, 0, 0),
+	SC9860_RFSCK0_MISC = SPRD_PIN_INFO(428, MISC_PIN, 0, 0, 0),
+	SC9860_RFSDA0_MISC = SPRD_PIN_INFO(430, MISC_PIN, 0, 0, 0),
+	SC9860_RFSEN0_MISC = SPRD_PIN_INFO(432, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_ADC_ON_MISC = SPRD_PIN_INFO(434, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_DAC_ON_MISC = SPRD_PIN_INFO(436, MISC_PIN, 0, 0, 0),
+	SC9860_RFSCK1_MISC = SPRD_PIN_INFO(438, MISC_PIN, 0, 0, 0),
+	SC9860_RFSDA1_MISC = SPRD_PIN_INFO(440, MISC_PIN, 0, 0, 0),
+	SC9860_RFSEN1_MISC = SPRD_PIN_INFO(442, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL38_MISC = SPRD_PIN_INFO(444, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL39_MISC = SPRD_PIN_INFO(446, MISC_PIN, 0, 0, 0),
+};
+
+static struct sprd_pins_info sprd_sc9860_pins_info[] = {
+	SPRD_PINCTRL_PIN(SC9860_VIO28_0_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD2_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD0_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM2_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM1_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM0_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO28_0_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD2_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD0_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM2_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM1_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM0_MS),
+	SPRD_PINCTRL_PIN(SC9860_SPSPI_PIN_IN_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART1_USB30_PHY_SEL),
+	SPRD_PINCTRL_PIN(SC9860_USB30_PHY_DM_OE),
+	SPRD_PINCTRL_PIN(SC9860_USB30_PHY_DP_OE),
+	SPRD_PINCTRL_PIN(SC9860_UART5_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_ORP_URXD_PIN_IN_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SIM2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SIM1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SIM0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_CLK26MHZ_BUF_OUT_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART3_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART24_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART23_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART14_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART13_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS3_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS23_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS13_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS12_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS03_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS02_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS01_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS6_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS5_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF6_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF7_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF6_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF5_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF3_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_WDRST_OUT_SEL),
+	SPRD_PINCTRL_PIN(SC9860_ADI_SYNC_PIN_OUT_SEL),
+	SPRD_PINCTRL_PIN(SC9860_CMRST_SEL),
+	SPRD_PINCTRL_PIN(SC9860_CMPD_SEL),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE11),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE10),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE9),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE8),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE7),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE6),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE5),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE4),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE3),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE2),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE1),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE0),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD3_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD2_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD1_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD0_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD7_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD6_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD5_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD4_SEL),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL20),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL21),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL30),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL31),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL32),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL33),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL34),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL35),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL36),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL37),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL22),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL23),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL24),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL25),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL26),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL27),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL28),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL29),
+	SPRD_PINCTRL_PIN(SC9860_SCL2),
+	SPRD_PINCTRL_PIN(SC9860_SDA2),
+	SPRD_PINCTRL_PIN(SC9860_MTCK_ARM),
+	SPRD_PINCTRL_PIN(SC9860_MTMS_ARM),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN0),
+	SPRD_PINCTRL_PIN(SC9860_PTEST),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD1),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADD0),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADSYNC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_SCLK),
+	SPRD_PINCTRL_PIN(SC9860_CHIP_SLEEP),
+	SPRD_PINCTRL_PIN(SC9860_CLK_32K),
+	SPRD_PINCTRL_PIN(SC9860_DCDC_ARM_EN),
+	SPRD_PINCTRL_PIN(SC9860_EXT_RST_B),
+	SPRD_PINCTRL_PIN(SC9860_ADI_D),
+	SPRD_PINCTRL_PIN(SC9860_ADI_SCLK),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN1),
+	SPRD_PINCTRL_PIN(SC9860_ANA_INT),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD0),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DASYNC),
+	SPRD_PINCTRL_PIN(SC9860_LCM_RSTN),
+	SPRD_PINCTRL_PIN(SC9860_DSI_TE),
+	SPRD_PINCTRL_PIN(SC9860_PWMA),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT0),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT1),
+	SPRD_PINCTRL_PIN(SC9860_SDA1),
+	SPRD_PINCTRL_PIN(SC9860_SCL1),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK2),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA2),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST2),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK1),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA1),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST1),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK0),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA0),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST0),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CMD),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D0),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D1),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CLK),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D2),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D3),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D3),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D2),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CMD),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D0),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D1),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CLK),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CMD),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D6),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D7),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CLK),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D5),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D4),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_DS),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D3),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_RST),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D1),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D2),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D0),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DI),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DO),
+	SPRD_PINCTRL_PIN(SC9860_IIS0CLK),
+	SPRD_PINCTRL_PIN(SC9860_IIS0LRCK),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CLK),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CMD),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D0),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D1),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D2),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D3),
+	SPRD_PINCTRL_PIN(SC9860_CLK_AUX0),
+	SPRD_PINCTRL_PIN(SC9860_WIFI_COEXIST),
+	SPRD_PINCTRL_PIN(SC9860_BEIDOU_COEXIST),
+	SPRD_PINCTRL_PIN(SC9860_U3TXD),
+	SPRD_PINCTRL_PIN(SC9860_U3RXD),
+	SPRD_PINCTRL_PIN(SC9860_U3CTS),
+	SPRD_PINCTRL_PIN(SC9860_U3RTS),
+	SPRD_PINCTRL_PIN(SC9860_U0TXD),
+	SPRD_PINCTRL_PIN(SC9860_U0RXD),
+	SPRD_PINCTRL_PIN(SC9860_U0CTS),
+	SPRD_PINCTRL_PIN(SC9860_U0RTS),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DI),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DO),
+	SPRD_PINCTRL_PIN(SC9860_IIS1CLK),
+	SPRD_PINCTRL_PIN(SC9860_IIS1LRCK),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CSN),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DO),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DI),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CLK),
+	SPRD_PINCTRL_PIN(SC9860_U2TXD),
+	SPRD_PINCTRL_PIN(SC9860_U2RXD),
+	SPRD_PINCTRL_PIN(SC9860_U4TXD),
+	SPRD_PINCTRL_PIN(SC9860_U4RXD),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK1),
+	SPRD_PINCTRL_PIN(SC9860_CMRST1),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK0),
+	SPRD_PINCTRL_PIN(SC9860_CMRST0),
+	SPRD_PINCTRL_PIN(SC9860_CMPD0),
+	SPRD_PINCTRL_PIN(SC9860_CMPD1),
+	SPRD_PINCTRL_PIN(SC9860_SCL0),
+	SPRD_PINCTRL_PIN(SC9860_SDA0),
+	SPRD_PINCTRL_PIN(SC9860_SDA6),
+	SPRD_PINCTRL_PIN(SC9860_SCL6),
+	SPRD_PINCTRL_PIN(SC9860_U1TXD),
+	SPRD_PINCTRL_PIN(SC9860_U1RXD),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT0),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT1),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT2),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN0),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN1),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN2),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DI),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DO),
+	SPRD_PINCTRL_PIN(SC9860_IIS3CLK),
+	SPRD_PINCTRL_PIN(SC9860_IIS3LRCK),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL0),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL1),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL10),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL11),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL12),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL13),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL14),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL15),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL16),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL17),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL18),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL19),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL2),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT5),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT6),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT7),
+	SPRD_PINCTRL_PIN(SC9860_GPIO30),
+	SPRD_PINCTRL_PIN(SC9860_GPIO31),
+	SPRD_PINCTRL_PIN(SC9860_GPIO32),
+	SPRD_PINCTRL_PIN(SC9860_GPIO33),
+	SPRD_PINCTRL_PIN(SC9860_GPIO34),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL3),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL4),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL5),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL6),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL7),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL8),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL9),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SCK0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO38),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SDA0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO39),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SCK0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO181),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SDA0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO182),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_ADC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_DAC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK0),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA0),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN0),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_ADC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_DAC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK1),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA1),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN1),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL38),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL39),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL20_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL21_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL30_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL31_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL32_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL33_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL34_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL35_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL36_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL37_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL22_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL23_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL24_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL25_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL26_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL27_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL28_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL29_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_MTCK_ARM_MISC),
+	SPRD_PINCTRL_PIN(SC9860_MTMS_ARM_MISC),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_PTEST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADD0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADSYNC_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_SCLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CHIP_SLEEP_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CLK_32K_MISC),
+	SPRD_PINCTRL_PIN(SC9860_DCDC_ARM_EN_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXT_RST_B_MISC),
+	SPRD_PINCTRL_PIN(SC9860_ADI_D_MISC),
+	SPRD_PINCTRL_PIN(SC9860_ADI_SCLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_ANA_INT_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DASYNC_MISC),
+	SPRD_PINCTRL_PIN(SC9860_LCM_RSTN_MISC),
+	SPRD_PINCTRL_PIN(SC9860_DSI_TE_MISC),
+	SPRD_PINCTRL_PIN(SC9860_PWMA_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D7_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D5_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D4_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_DS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_RST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0LRCK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CLK_AUX0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_WIFI_COEXIST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_BEIDOU_COEXIST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3CTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3RTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0CTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0RTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1LRCK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CSN_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U2TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U2RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U4TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U4RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMRST1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMRST0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMPD0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMPD1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U1TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U1RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3LRCK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL10_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL11_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL12_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL13_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL14_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL15_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL16_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL17_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL18_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL19_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT5_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT7_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO30_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO31_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO32_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO33_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO34_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL4_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL5_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL7_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL8_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL9_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SCK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO38_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO39_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SCK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO181_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO182_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_ADC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_DAC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_ADC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_DAC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL38_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL39_MISC),
+};
+
+static int sprd_pinctrl_probe(struct platform_device *pdev)
+{
+	return sprd_pinctrl_core_probe(pdev, sprd_sc9860_pins_info,
+				       ARRAY_SIZE(sprd_sc9860_pins_info));
+}
+
+static const struct of_device_id sprd_pinctrl_of_match[] = {
+	{
+		.compatible = "sprd,sc9860-pinctrl",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sprd_pinctrl_of_match);
+
+static struct platform_driver sprd_pinctrl_driver = {
+	.driver = {
+		.name = "sprd-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = sprd_pinctrl_of_match,
+	},
+	.probe = sprd_pinctrl_probe,
+	.remove = sprd_pinctrl_remove,
+	.shutdown = sprd_pinctrl_shutdown,
+};
+
+static int sprd_pinctrl_init(void)
+{
+	return platform_driver_register(&sprd_pinctrl_driver);
+}
+module_init(sprd_pinctrl_init);
+
+static void sprd_pinctrl_exit(void)
+{
+	platform_driver_unregister(&sprd_pinctrl_driver);
+}
+module_exit(sprd_pinctrl_exit);
+
+MODULE_DESCRIPTION("SPREADTRUM Pin Controller Driver");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
new file mode 100644
index 0000000..7e7b9ac
--- /dev/null
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -0,0 +1,1113 @@
+/*
+ * Spreadtrum pin controller driver
+ * Copyright (C) 2017 Spreadtrum  - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/slab.h>
+
+#include "../core.h"
+#include "../pinmux.h"
+#include "../pinconf.h"
+#include "../pinctrl-utils.h"
+#include "pinctrl-sprd.h"
+
+#define PINCTRL_BIT_MASK(width)		(~(~0UL << (width)))
+#define PINCTRL_REG_OFFSET		0x20
+#define PINCTRL_REG_MISC_OFFSET		0x4020
+#define PINCTRL_REG_LEN			0x4
+
+#define PIN_FUNC_MASK			(BIT(4) | BIT(5))
+#define PIN_FUNC_SEL_1			~PIN_FUNC_MASK
+#define PIN_FUNC_SEL_2			BIT(4)
+#define PIN_FUNC_SEL_3			BIT(5)
+#define PIN_FUNC_SEL_4			PIN_FUNC_MASK
+
+#define AP_SLEEP_MODE			BIT(13)
+#define PUBCP_SLEEP_MODE		BIT(14)
+#define TGLDSP_SLEEP_MODE		BIT(15)
+#define AGDSP_SLEEP_MODE		BIT(16)
+#define SLEEP_MODE_MASK			GENMASK(3, 0)
+#define SLEEP_MODE_SHIFT		13
+
+#define SLEEP_INPUT			BIT(1)
+#define SLEEP_INPUT_MASK		0x1
+#define SLEEP_INPUT_SHIFT		1
+
+#define SLEEP_OUTPUT			BIT(0)
+#define SLEEP_OUTPUT_MASK		0x1
+#define SLEEP_OUTPUT_SHIFT		0
+
+#define DRIVE_STRENGTH_MASK		GENMASK(3, 0)
+#define DRIVE_STRENGTH_SHIFT		19
+
+#define SLEEP_PULL_DOWN			BIT(2)
+#define SLEEP_PULL_DOWN_MASK		0x1
+#define SLEEP_PULL_DOWN_SHIFT		2
+
+#define PULL_DOWN			BIT(6)
+#define PULL_DOWN_MASK			0x1
+#define PULL_DOWN_SHIFT			6
+
+#define SLEEP_PULL_UP			BIT(3)
+#define SLEEP_PULL_UP_MASK		0x1
+#define SLEEP_PULL_UP_SHIFT		3
+
+#define PULL_UP_20K			(BIT(12) | BIT(7))
+#define PULL_UP_4_7K			BIT(12)
+#define PULL_UP_MASK			0x21
+#define PULL_UP_SHIFT			7
+
+#define INPUT_SCHMITT			BIT(11)
+#define INPUT_SCHMITT_MASK		0x1
+#define INPUT_SCHMITT_SHIFT		11
+
+enum pin_sleep_mode {
+	AP_SLEEP = BIT(0),
+	PUBCP_SLEEP = BIT(1),
+	TGLDSP_SLEEP = BIT(2),
+	AGDSP_SLEEP = BIT(3),
+};
+
+enum pin_func_sel {
+	PIN_FUNC_1,
+	PIN_FUNC_2,
+	PIN_FUNC_3,
+	PIN_FUNC_4,
+	PIN_FUNC_MAX,
+};
+
+/**
+ * struct sprd_pin: represent one pin's description
+ * @name: pin name
+ * @number: pin number
+ * @type: pin type, can be GLOBAL_CTRL_PIN/COMMON_PIN/MISC_PIN
+ * @reg: pin register address
+ * @bit_offset: bit offset in pin register
+ * @bit_width: bit width in pin register
+ */
+struct sprd_pin {
+	const char *name;
+	unsigned int number;
+	enum pin_type type;
+	unsigned long reg;
+	unsigned long bit_offset;
+	unsigned long bit_width;
+};
+
+/**
+ * struct sprd_pin_group: represent one group's description
+ * @name: group name
+ * @npins: pin numbers of this group
+ * @pins: pointer to pins array
+ */
+struct sprd_pin_group {
+	const char *name;
+	unsigned int npins;
+	unsigned int *pins;
+};
+
+/**
+ * struct sprd_pinctrl_soc_info: represent the SoC's pins description
+ * @groups: pointer to groups of pins
+ * @ngroups: group numbers of the whole SoC
+ * @pins: pointer to pins description
+ * @npins: pin numbers of the whole SoC
+ * @grp_names: pointer to group names array
+ */
+struct sprd_pinctrl_soc_info {
+	struct sprd_pin_group *groups;
+	unsigned int ngroups;
+	struct sprd_pin *pins;
+	unsigned int npins;
+	const char **grp_names;
+};
+
+/**
+ * struct sprd_pinctrl: represent the pin controller device
+ * @dev: pointer to the device structure
+ * @pctl: pointer to the pinctrl handle
+ * @base: base address of the controller
+ * @info: pointer to SoC's pins description information
+ */
+struct sprd_pinctrl {
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+	void __iomem *base;
+	struct sprd_pinctrl_soc_info *info;
+};
+
+enum sprd_pinconf_params {
+	SPRD_PIN_CONFIG_CONTROL = PIN_CONFIG_END + 1,
+	SPRD_PIN_CONFIG_SLEEP_MODE = PIN_CONFIG_END + 2,
+};
+
+static int sprd_pinctrl_get_id_by_name(struct sprd_pinctrl *sprd_pctl,
+				       const char *name)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	int i;
+
+	for (i = 0; i < info->npins; i++) {
+		if (!strcmp(info->pins[i].name, name))
+			return info->pins[i].number;
+	}
+
+	return -ENODEV;
+}
+
+static struct sprd_pin *
+sprd_pinctrl_get_pin_by_id(struct sprd_pinctrl *sprd_pctl, unsigned int id)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	struct sprd_pin *pin = NULL;
+	int i;
+
+	for (i = 0; i < info->npins; i++) {
+		if (info->pins[i].number == id) {
+			pin = &info->pins[i];
+			break;
+		}
+	}
+
+	return pin;
+}
+
+static const struct sprd_pin_group *
+sprd_pinctrl_find_group_by_name(struct sprd_pinctrl *sprd_pctl,
+				const char *name)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	const struct sprd_pin_group *grp = NULL;
+	int i;
+
+	for (i = 0; i < info->ngroups; i++) {
+		if (!strcmp(info->groups[i].name, name)) {
+			grp = &info->groups[i];
+			break;
+		}
+	}
+
+	return grp;
+}
+
+static int sprd_pctrl_group_count(struct pinctrl_dev *pctldev)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	return info->ngroups;
+}
+
+static const char *sprd_pctrl_group_name(struct pinctrl_dev *pctldev,
+					 unsigned int selector)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	return info->groups[selector].name;
+}
+
+static int sprd_pctrl_group_pins(struct pinctrl_dev *pctldev,
+				 unsigned int selector,
+				 const unsigned int **pins,
+				 unsigned int *npins)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	if (selector >= info->ngroups)
+		return -EINVAL;
+
+	*pins = info->groups[selector].pins;
+	*npins = info->groups[selector].npins;
+
+	return 0;
+}
+
+static int sprd_dt_node_to_map(struct pinctrl_dev *pctldev,
+			       struct device_node *np,
+			       struct pinctrl_map **map,
+			       unsigned int *num_maps)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	const struct sprd_pin_group *grp;
+	unsigned long *configs = NULL;
+	unsigned int num_configs = 0;
+	unsigned int reserved_maps = 0;
+	unsigned int reserve = 0;
+	const char *function;
+	enum pinctrl_map_type type;
+	int ret;
+
+	grp = sprd_pinctrl_find_group_by_name(pctl, np->name);
+	if (!grp) {
+		dev_err(pctl->dev, "unable to find group for node %s\n",
+			of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	ret = of_property_count_strings(np, "pins");
+	if (ret < 0)
+		return ret;
+
+	if (ret == 1)
+		type = PIN_MAP_TYPE_CONFIGS_PIN;
+	else
+		type = PIN_MAP_TYPE_CONFIGS_GROUP;
+
+	ret = of_property_read_string(np, "function", &function);
+	if (ret < 0) {
+		if (ret != -EINVAL)
+			dev_err(pctl->dev,
+				"%s: could not parse property function\n",
+				of_node_full_name(np));
+		function = NULL;
+	}
+
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
+	if (ret < 0) {
+		dev_err(pctl->dev, "%s: could not parse node property\n",
+			of_node_full_name(np));
+		return ret;
+	}
+
+	*map = NULL;
+	*num_maps = 0;
+
+	if (function != NULL)
+		reserve++;
+	if (num_configs)
+		reserve++;
+
+	ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps,
+					num_maps, reserve);
+	if (ret < 0)
+		goto out;
+
+	if (function) {
+		ret = pinctrl_utils_add_map_mux(pctldev, map,
+						&reserved_maps, num_maps,
+						grp->name, function);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (num_configs) {
+		const char *group_or_pin;
+		unsigned int pin_id;
+
+		if (type == PIN_MAP_TYPE_CONFIGS_PIN) {
+			pin_id = grp->pins[0];
+			group_or_pin = pin_get_name(pctldev, pin_id);
+		} else {
+			group_or_pin = grp->name;
+		}
+
+		ret = pinctrl_utils_add_map_configs(pctldev, map,
+						    &reserved_maps, num_maps,
+						    group_or_pin, configs,
+						    num_configs, type);
+	}
+
+out:
+	kfree(configs);
+	return ret;
+}
+
+static void sprd_pctrl_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+				unsigned int offset)
+{
+	seq_printf(s, "%s", dev_name(pctldev->dev));
+}
+
+static const struct pinctrl_ops sprd_pctrl_ops = {
+	.get_groups_count = sprd_pctrl_group_count,
+	.get_group_name = sprd_pctrl_group_name,
+	.get_group_pins = sprd_pctrl_group_pins,
+	.pin_dbg_show = sprd_pctrl_dbg_show,
+	.dt_node_to_map = sprd_dt_node_to_map,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+int sprd_pmx_get_function_count(struct pinctrl_dev *pctldev)
+{
+	return PIN_FUNC_MAX;
+}
+
+const char *sprd_pmx_get_function_name(struct pinctrl_dev *pctldev,
+				       unsigned int selector)
+{
+	switch (selector) {
+	case PIN_FUNC_1:
+		return "func1";
+	case PIN_FUNC_2:
+		return "func2";
+	case PIN_FUNC_3:
+		return "func3";
+	case PIN_FUNC_4:
+		return "func4";
+	default:
+		return "null";
+	}
+}
+
+int sprd_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+				 unsigned int selector,
+				 const char * const **groups,
+				 unsigned int * const num_groups)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	*groups = info->grp_names;
+	*num_groups = info->ngroups;
+
+	return 0;
+}
+
+static int sprd_pmx_set_mux(struct pinctrl_dev *pctldev,
+			    unsigned int func_selector,
+			    unsigned int group_selector)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp = &info->groups[group_selector];
+	unsigned int i, grp_pins = grp->npins;
+	unsigned long reg;
+	unsigned int val = 0;
+
+	if (group_selector > info->ngroups)
+		return -EINVAL;
+
+	switch (func_selector) {
+	case PIN_FUNC_1:
+		val &= PIN_FUNC_SEL_1;
+		break;
+	case PIN_FUNC_2:
+		val |= PIN_FUNC_SEL_2;
+		break;
+	case PIN_FUNC_3:
+		val |= PIN_FUNC_SEL_3;
+		break;
+	case PIN_FUNC_4:
+		val |= PIN_FUNC_SEL_4;
+		break;
+	default:
+		break;
+	}
+
+	for (i = 0; i < grp_pins; i++) {
+		unsigned int pin_id = grp->pins[i];
+		struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+
+		if (!pin || pin->type != COMMON_PIN)
+			continue;
+
+		reg = readl((void __iomem *)pin->reg);
+		reg &= ~PIN_FUNC_MASK;
+		reg |= val;
+		writel(reg, (void __iomem *)pin->reg);
+	}
+
+	return 0;
+}
+
+static const struct pinmux_ops sprd_pmx_ops = {
+	.get_functions_count = sprd_pmx_get_function_count,
+	.get_function_name = sprd_pmx_get_function_name,
+	.get_function_groups = sprd_pmx_get_function_groups,
+	.set_mux = sprd_pmx_set_mux,
+};
+
+static int sprd_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin_id,
+			    unsigned long *config)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+	unsigned int param = pinconf_to_config_param(*config);
+	unsigned int reg, arg;
+
+	if (!pin)
+		return -EINVAL;
+
+	if (pin->type == GLOBAL_CTRL_PIN) {
+		reg = (readl((void __iomem *)pin->reg) >>
+			   pin->bit_offset) & PINCTRL_BIT_MASK(pin->bit_width);
+	} else {
+		reg = readl((void __iomem *)pin->reg);
+	}
+
+	if (pin->type == GLOBAL_CTRL_PIN &&
+	    param == SPRD_PIN_CONFIG_CONTROL) {
+		arg = reg;
+	} else if (pin->type == COMMON_PIN) {
+		switch (param) {
+		case SPRD_PIN_CONFIG_SLEEP_MODE:
+			arg = (reg >> SLEEP_MODE_SHIFT) & SLEEP_MODE_MASK;
+			break;
+		case PIN_CONFIG_INPUT_ENABLE:
+			arg = (reg >> SLEEP_INPUT_SHIFT) & SLEEP_INPUT_MASK;
+			break;
+		case PIN_CONFIG_OUTPUT:
+			arg = reg & SLEEP_OUTPUT_MASK;
+			break;
+		case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+			arg = 0;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	} else if (pin->type == MISC_PIN) {
+		switch (param) {
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			arg = (reg >> DRIVE_STRENGTH_SHIFT) &
+				DRIVE_STRENGTH_MASK;
+			break;
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			/* combine sleep pull down and pull down config */
+			arg = ((reg >> SLEEP_PULL_DOWN_SHIFT) &
+			       SLEEP_PULL_DOWN_MASK) << 16;
+			arg |= (reg >> PULL_DOWN_SHIFT) & PULL_DOWN_MASK;
+			break;
+		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+			arg = (reg >> INPUT_SCHMITT_SHIFT) & INPUT_SCHMITT_MASK;
+			break;
+		case PIN_CONFIG_BIAS_PULL_UP:
+			/* combine sleep pull up and pull up config */
+			arg = ((reg >> SLEEP_PULL_UP_SHIFT) &
+			       SLEEP_PULL_UP_MASK) << 16;
+			arg |= (reg >> PULL_UP_SHIFT) & PULL_UP_MASK;
+			break;
+		case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+			arg = 0;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	} else {
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+	return 0;
+}
+
+static unsigned int sprd_pinconf_drive(unsigned int mA)
+{
+	unsigned int val = 0;
+
+	switch (mA) {
+	case 2:
+		break;
+	case 4:
+		val |= BIT(19);
+		break;
+	case 6:
+		val |= BIT(20);
+		break;
+	case 8:
+		val |= BIT(19) | BIT(20);
+		break;
+	case 10:
+		val |= BIT(21);
+		break;
+	case 12:
+		val |= BIT(21) | BIT(19);
+		break;
+	case 14:
+		val |= BIT(21) | BIT(20);
+		break;
+	case 16:
+		val |= BIT(19) | BIT(20) | BIT(21);
+		break;
+	case 20:
+		val |= BIT(22);
+		break;
+	case 21:
+		val |= BIT(22) | BIT(19);
+		break;
+	case 24:
+		val |= BIT(22) | BIT(20);
+		break;
+	case 25:
+		val |= BIT(22) | BIT(20) | BIT(19);
+		break;
+	case 27:
+		val |= BIT(22) | BIT(21);
+		break;
+	case 29:
+		val |= BIT(22) | BIT(21) | BIT(19);
+		break;
+	case 31:
+		val |= BIT(22) | BIT(21) | BIT(20);
+		break;
+	case 33:
+		val |= BIT(22) | BIT(21) | BIT(20) | BIT(19);
+		break;
+	default:
+		break;
+	}
+
+	return val;
+}
+
+static bool sprd_pinctrl_check_sleep_config(unsigned long *configs,
+					    unsigned int num_configs)
+{
+	unsigned int param;
+	int i;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		if (param == PIN_CONFIG_SLEEP_HARDWARE_STATE)
+			return true;
+	}
+
+	return false;
+}
+
+static int sprd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin_id,
+			    unsigned long *configs, unsigned int num_configs)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+	bool is_sleep_config;
+	unsigned long reg;
+	int i;
+
+	if (!pin)
+		return -EINVAL;
+
+	is_sleep_config = sprd_pinctrl_check_sleep_config(configs, num_configs);
+
+	for (i = 0; i < num_configs; i++) {
+		unsigned int param, arg, shift, mask, val;
+
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		val = 0;
+		shift = 0;
+		mask = 0;
+		if (pin->type == GLOBAL_CTRL_PIN &&
+		    param == SPRD_PIN_CONFIG_CONTROL) {
+			val = arg;
+		} else if (pin->type == COMMON_PIN) {
+			switch (param) {
+			case SPRD_PIN_CONFIG_SLEEP_MODE:
+				if (arg & AP_SLEEP)
+					val |= AP_SLEEP_MODE;
+				if (arg & PUBCP_SLEEP)
+					val |= PUBCP_SLEEP_MODE;
+				if (arg & TGLDSP_SLEEP)
+					val |= TGLDSP_SLEEP_MODE;
+				if (arg & AGDSP_SLEEP)
+					val |= AGDSP_SLEEP_MODE;
+
+				mask = SLEEP_MODE_MASK;
+				shift = SLEEP_MODE_SHIFT;
+				break;
+			case PIN_CONFIG_INPUT_ENABLE:
+				if (is_sleep_config == true) {
+					if (arg > 0)
+						val |= SLEEP_INPUT;
+					else
+						val &= ~SLEEP_INPUT;
+
+					mask = SLEEP_INPUT_MASK;
+					shift = SLEEP_INPUT_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_OUTPUT:
+				if (is_sleep_config == true) {
+					val |= SLEEP_OUTPUT;
+					mask = SLEEP_OUTPUT_MASK;
+					shift = SLEEP_OUTPUT_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+				continue;
+			default:
+				return -ENOTSUPP;
+			}
+		} else if (pin->type == MISC_PIN) {
+			switch (param) {
+			case PIN_CONFIG_DRIVE_STRENGTH:
+				if (arg < 2 || arg > 60)
+					return -EINVAL;
+
+				val = sprd_pinconf_drive(arg);
+				mask = DRIVE_STRENGTH_MASK;
+				shift = DRIVE_STRENGTH_SHIFT;
+				break;
+			case PIN_CONFIG_BIAS_PULL_DOWN:
+				if (is_sleep_config == true) {
+					val |= SLEEP_PULL_DOWN;
+					mask = SLEEP_PULL_DOWN_MASK;
+					shift = SLEEP_PULL_DOWN_SHIFT;
+				} else {
+					val |= PULL_DOWN;
+					mask = PULL_DOWN_MASK;
+					shift = PULL_DOWN_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+				if (arg > 0)
+					val |= INPUT_SCHMITT;
+				else
+					val &= ~INPUT_SCHMITT;
+
+				mask = INPUT_SCHMITT_MASK;
+				shift = INPUT_SCHMITT_SHIFT;
+				break;
+			case PIN_CONFIG_BIAS_PULL_UP:
+				if (is_sleep_config == true) {
+					val |= SLEEP_PULL_UP;
+					mask = SLEEP_PULL_UP_MASK;
+					shift = SLEEP_PULL_UP_SHIFT;
+				} else {
+					if (arg == 20000)
+						val |= PULL_UP_20K;
+					else if (arg == 4700)
+						val |= PULL_UP_4_7K;
+
+					mask = PULL_UP_MASK;
+					shift = PULL_UP_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+				continue;
+			default:
+				return -ENOTSUPP;
+			}
+		} else {
+			return -ENOTSUPP;
+		}
+
+		if (pin->type == GLOBAL_CTRL_PIN) {
+			reg = readl((void __iomem *)pin->reg);
+			reg &= ~(PINCTRL_BIT_MASK(pin->bit_width)
+				<< pin->bit_offset);
+			reg |= (val & PINCTRL_BIT_MASK(pin->bit_width))
+				<< pin->bit_offset;
+			writel(reg, (void __iomem *)pin->reg);
+		} else {
+			reg = readl((void __iomem *)pin->reg);
+			reg &= ~(mask << shift);
+			reg |= val;
+			writel(reg, (void __iomem *)pin->reg);
+		}
+	}
+
+	return 0;
+}
+
+static int sprd_pinconf_group_get(struct pinctrl_dev *pctldev,
+				  unsigned int selector, unsigned long *config)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp;
+	unsigned int pin_id;
+
+	if (selector > info->ngroups)
+		return -EINVAL;
+
+	grp = &info->groups[selector];
+	pin_id = grp->pins[0];
+
+	return sprd_pinconf_get(pctldev, pin_id, config);
+}
+
+static int sprd_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned int selector,
+				  unsigned long *configs,
+				  unsigned int num_configs)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp;
+	int ret, i;
+
+	if (selector > info->ngroups)
+		return -EINVAL;
+
+	grp = &info->groups[selector];
+
+	for (i = 0; i < grp->npins; i++) {
+		unsigned int pin_id = grp->pins[i];
+
+		ret = sprd_pinconf_set(pctldev, pin_id, configs, num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sprd_pinconf_get_config(struct pinctrl_dev *pctldev,
+				   unsigned int pin_id,
+				   unsigned long *config)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+
+	if (!pin)
+		return -EINVAL;
+
+	if (pin->type == GLOBAL_CTRL_PIN) {
+		*config = (readl((void __iomem *)pin->reg) >>
+			   pin->bit_offset) & PINCTRL_BIT_MASK(pin->bit_width);
+	} else {
+		*config = readl((void __iomem *)pin->reg);
+	}
+
+	return 0;
+}
+
+static void sprd_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				  struct seq_file *s, unsigned int pin_id)
+{
+	unsigned long config;
+	int ret;
+
+	ret = sprd_pinconf_get_config(pctldev, pin_id, &config);
+	if (ret)
+		return;
+
+	seq_printf(s, "0x%lx", config);
+}
+
+static void sprd_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s,
+					unsigned int selector)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp;
+	unsigned long config;
+	const char *name;
+	int i, ret;
+
+	if (selector > info->ngroups)
+		return;
+
+	grp = &info->groups[selector];
+
+	seq_printf(s, "\n");
+	for (i = 0; i < grp->npins; i++, config++) {
+		unsigned int pin_id = grp->pins[i];
+
+		name = pin_get_name(pctldev, pin_id);
+		ret = sprd_pinconf_get_config(pctldev, pin_id, &config);
+		if (ret)
+			return;
+
+		seq_printf(s, "%s: 0x%lx ", name, config);
+	}
+}
+
+static const struct pinconf_ops sprd_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = sprd_pinconf_get,
+	.pin_config_set = sprd_pinconf_set,
+	.pin_config_group_get = sprd_pinconf_group_get,
+	.pin_config_group_set = sprd_pinconf_group_set,
+	.pin_config_dbg_show = sprd_pinconf_dbg_show,
+	.pin_config_group_dbg_show = sprd_pinconf_group_dbg_show,
+};
+
+static const struct pinconf_generic_params sprd_dt_params[] = {
+	{"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0},
+	{"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0},
+};
+
+#ifdef CONFIG_DEBUG_FS
+static const struct pin_config_item sprd_conf_items[] = {
+	PCONFDUMP(SPRD_PIN_CONFIG_CONTROL, "global control", NULL, true),
+	PCONFDUMP(SPRD_PIN_CONFIG_SLEEP_MODE, "sleep mode", NULL, true),
+};
+#endif
+
+static struct pinctrl_desc sprd_pinctrl_desc = {
+	.pctlops = &sprd_pctrl_ops,
+	.pmxops = &sprd_pmx_ops,
+	.confops = &sprd_pinconf_ops,
+	.num_custom_params = ARRAY_SIZE(sprd_dt_params),
+	.custom_params = sprd_dt_params,
+#ifdef CONFIG_DEBUG_FS
+	.custom_conf_items = sprd_conf_items,
+#endif
+	.owner = THIS_MODULE,
+};
+
+static int sprd_pinctrl_parse_groups(struct device_node *np,
+				     struct sprd_pinctrl *sprd_pctl,
+				     struct sprd_pin_group *grp)
+{
+	struct property *prop;
+	const char *pin_name;
+	int ret, i = 0;
+
+	ret = of_property_count_strings(np, "pins");
+	if (ret < 0)
+		return ret;
+
+	grp->name = np->name;
+	grp->npins = ret;
+	grp->pins = devm_kzalloc(sprd_pctl->dev, grp->npins *
+				 sizeof(unsigned int), GFP_KERNEL);
+	if (!grp->pins)
+		return -ENOMEM;
+
+	of_property_for_each_string(np, "pins", prop, pin_name) {
+		ret = sprd_pinctrl_get_id_by_name(sprd_pctl, pin_name);
+		if (ret >= 0)
+			grp->pins[i++] = ret;
+	}
+
+	for (i = 0; i < grp->npins; i++) {
+		dev_dbg(sprd_pctl->dev,
+			"Group[%s] contains [%d] pins: id = %d\n",
+			grp->name, grp->npins, grp->pins[i]);
+	}
+
+	return 0;
+}
+
+static unsigned int sprd_pinctrl_get_groups(struct device_node *np)
+{
+	struct device_node *child;
+	unsigned int group_cnt, cnt;
+
+	group_cnt = of_get_child_count(np);
+
+	for_each_child_of_node(np, child) {
+		cnt = of_get_child_count(child);
+		if (cnt > 0)
+			group_cnt += cnt;
+	}
+
+	return group_cnt;
+}
+
+static int sprd_pinctrl_parse_dt(struct sprd_pinctrl *sprd_pctl)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	struct device_node *np = sprd_pctl->dev->of_node;
+	struct device_node *child, *sub_child;
+	struct sprd_pin_group *grp;
+	const char **temp;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	info->ngroups = sprd_pinctrl_get_groups(np);
+	if (!info->ngroups)
+		return 0;
+
+	info->groups = devm_kzalloc(sprd_pctl->dev, info->ngroups *
+				    sizeof(struct sprd_pin_group),
+				    GFP_KERNEL);
+	if (!info->groups)
+		return -ENOMEM;
+
+	info->grp_names = devm_kzalloc(sprd_pctl->dev,
+				       info->ngroups * sizeof(char *),
+				       GFP_KERNEL);
+	if (!info->grp_names)
+		return -ENOMEM;
+
+	temp = info->grp_names;
+	grp = info->groups;
+
+	for_each_child_of_node(np, child) {
+		ret = sprd_pinctrl_parse_groups(child, sprd_pctl, grp);
+		if (ret)
+			return ret;
+
+		*temp++ = grp->name;
+		grp++;
+
+		if (of_get_child_count(child) > 0) {
+			for_each_child_of_node(child, sub_child) {
+				ret = sprd_pinctrl_parse_groups(sub_child,
+								sprd_pctl, grp);
+				if (ret)
+					return ret;
+
+				*temp++ = grp->name;
+				grp++;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int sprd_pinctrl_add_pins(struct sprd_pinctrl *sprd_pctl,
+				 struct sprd_pins_info *sprd_soc_pin_info,
+				 int pins_cnt)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	unsigned int ctrl_pin = 0, com_pin = 0;
+	struct sprd_pin *pin;
+	int i;
+
+	info->npins = pins_cnt;
+	info->pins = devm_kzalloc(sprd_pctl->dev,
+				  info->npins * sizeof(struct sprd_pin),
+				  GFP_KERNEL);
+	if (!info->pins)
+		return -ENOMEM;
+
+	for (i = 0, pin = info->pins; i < info->npins; i++, pin++) {
+		unsigned int reg;
+
+		pin->name = sprd_soc_pin_info[i].name;
+		pin->type = sprd_soc_pin_info[i].type;
+		pin->number = sprd_soc_pin_info[i].num;
+		reg = sprd_soc_pin_info[i].reg;
+		if (pin->type == GLOBAL_CTRL_PIN) {
+			pin->reg = (unsigned long)sprd_pctl->base +
+				PINCTRL_REG_LEN * reg;
+			pin->bit_offset = sprd_soc_pin_info[i].bit_offset;
+			pin->bit_width = sprd_soc_pin_info[i].bit_width;
+			ctrl_pin++;
+		} else if (pin->type == COMMON_PIN) {
+			pin->reg = (unsigned long)sprd_pctl->base +
+				PINCTRL_REG_OFFSET + PINCTRL_REG_LEN *
+				(i - ctrl_pin);
+			com_pin++;
+		} else if (pin->type == MISC_PIN) {
+			pin->reg = (unsigned long)sprd_pctl->base +
+				PINCTRL_REG_MISC_OFFSET + PINCTRL_REG_LEN *
+				(i - ctrl_pin - com_pin);
+		}
+	}
+
+	for (i = 0, pin = info->pins; i < info->npins; pin++, i++) {
+		dev_dbg(sprd_pctl->dev, "pin name[%s-%d], type = %d, "
+			"bit offset = %ld, bit width = %ld, reg = 0x%lx\n",
+			pin->name, pin->number, pin->type,
+			pin->bit_offset, pin->bit_width, pin->reg);
+	}
+
+	return 0;
+}
+
+int sprd_pinctrl_core_probe(struct platform_device *pdev,
+			    struct sprd_pins_info *sprd_soc_pin_info,
+			    int pins_cnt)
+{
+	struct sprd_pinctrl *sprd_pctl;
+	struct sprd_pinctrl_soc_info *pinctrl_info;
+	struct pinctrl_pin_desc *pin_desc;
+	struct resource *res;
+	int ret, i;
+
+	sprd_pctl = devm_kzalloc(&pdev->dev, sizeof(struct sprd_pinctrl),
+				 GFP_KERNEL);
+	if (!sprd_pctl)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sprd_pctl->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sprd_pctl->base))
+		return PTR_ERR(sprd_pctl->base);
+
+	pinctrl_info = devm_kzalloc(&pdev->dev,
+				    sizeof(struct sprd_pinctrl_soc_info),
+				    GFP_KERNEL);
+	if (!pinctrl_info)
+		return -ENOMEM;
+
+	sprd_pctl->info = pinctrl_info;
+	sprd_pctl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, sprd_pctl);
+
+	ret = sprd_pinctrl_add_pins(sprd_pctl, sprd_soc_pin_info, pins_cnt);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to add pins information\n");
+		return ret;
+	}
+
+	pin_desc = devm_kzalloc(&pdev->dev, pinctrl_info->npins *
+				sizeof(struct pinctrl_pin_desc),
+				GFP_KERNEL);
+	if (!pin_desc)
+		return -ENOMEM;
+
+	for (i = 0; i < pinctrl_info->npins; i++) {
+		pin_desc[i].number = pinctrl_info->pins[i].number;
+		pin_desc[i].name = pinctrl_info->pins[i].name;
+		pin_desc[i].drv_data = pinctrl_info;
+	}
+
+	sprd_pinctrl_desc.pins = pin_desc;
+	sprd_pinctrl_desc.name = dev_name(&pdev->dev);
+	sprd_pinctrl_desc.npins = pinctrl_info->npins;
+
+	sprd_pctl->pctl = pinctrl_register(&sprd_pinctrl_desc,
+					   &pdev->dev, (void *)sprd_pctl);
+	if (IS_ERR(sprd_pctl->pctl)) {
+		dev_err(&pdev->dev, "could not register pinctrl driver\n");
+		return PTR_ERR(sprd_pctl->pctl);
+	}
+
+	ret = sprd_pinctrl_parse_dt(sprd_pctl);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to parse dt properties\n");
+		pinctrl_unregister(sprd_pctl->pctl);
+		return ret;
+	}
+
+	return 0;
+}
+
+int sprd_pinctrl_remove(struct platform_device *pdev)
+{
+	struct sprd_pinctrl *sprd_pctl = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(sprd_pctl->pctl);
+	return 0;
+}
+
+void sprd_pinctrl_shutdown(struct platform_device *pdev)
+{
+	struct pinctrl *pinctl = devm_pinctrl_get(&pdev->dev);
+	struct pinctrl_state *state;
+
+	state = pinctrl_lookup_state(pinctl, "shutdown");
+	if (!IS_ERR(state))
+		pinctrl_select_state(pinctl, state);
+}
+
+MODULE_DESCRIPTION("SPREADTRUM Pin Controller Driver");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.h b/drivers/pinctrl/sprd/pinctrl-sprd.h
new file mode 100644
index 0000000..31a43fe
--- /dev/null
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.h
@@ -0,0 +1,67 @@
+/*
+ * Driver header file for pin controller driver
+ * Copyright (C) 2017 Spreadtrum  - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __PINCTRL_SPRD_H__
+#define __PINCTRL_SPRD_H__
+
+struct platform_device;
+
+#define NUM_OFFSET	(20)
+#define TYPE_OFFSET	(16)
+#define BIT_OFFSET	(8)
+#define WIDTH_OFFSET	(4)
+
+#define SPRD_PIN_INFO(num, type, offset, width, reg)	\
+		(((num) & 0xFFF) << NUM_OFFSET |	\
+		 ((type) & 0xF) << TYPE_OFFSET |	\
+		 ((offset) & 0xFF) << BIT_OFFSET |	\
+		 ((width) & 0xF) << WIDTH_OFFSET |	\
+		 ((reg) & 0xF))
+
+#define SPRD_PINCTRL_PIN(pin)	SPRD_PINCTRL_PIN_DATA(pin, #pin)
+
+#define SPRD_PINCTRL_PIN_DATA(a, b)				\
+	{							\
+		.name = b,					\
+		.num = (((a) >> NUM_OFFSET) & 0xfff),		\
+		.type = (((a) >> TYPE_OFFSET) & 0xf),		\
+		.bit_offset = (((a) >> BIT_OFFSET) & 0xff),	\
+		.bit_width = ((a) >> WIDTH_OFFSET & 0xf),	\
+		.reg = ((a) & 0xf)				\
+	}
+
+enum pin_type {
+	GLOBAL_CTRL_PIN,
+	COMMON_PIN,
+	MISC_PIN,
+};
+
+struct sprd_pins_info {
+	const char *name;
+	unsigned int num;
+	enum pin_type type;
+
+	/* for global control pins configuration */
+	unsigned long bit_offset;
+	unsigned long bit_width;
+	unsigned int reg;
+};
+
+int sprd_pinctrl_core_probe(struct platform_device *pdev,
+			    struct sprd_pins_info *sprd_soc_pin_info,
+			    int pins_cnt);
+int sprd_pinctrl_remove(struct platform_device *pdev);
+void sprd_pinctrl_shutdown(struct platform_device *pdev);
+
+#endif /* __PINCTRL_SPRD_H__ */
-- 
1.7.9.5

[PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[Baolin Wang]

This patch adds the pin control driver for Spreadtrum SC9860 platform.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
---
Changes since v4:
 - Remove sleep configs.
 - Use one standard sleep hardware state config to indicate sleep configs.

Changes since v3:
 - Use the generic "bia-pull-up" config.
 - Use some generic sleep related config.

Changes since v2:
 - Fix some compile warnings.
 - Reimplement the pin_config_get() callback and add debug function.

Changes since v1:
 - Remove magic numbers and use generic pin control bindings.
---
 drivers/pinctrl/Kconfig                    |    1 +
 drivers/pinctrl/Makefile                   |    1 +
 drivers/pinctrl/sprd/Kconfig               |   17 +
 drivers/pinctrl/sprd/Makefile              |    2 +
 drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c |  972 ++++++++++++++++++++++++
 drivers/pinctrl/sprd/pinctrl-sprd.c        | 1113 ++++++++++++++++++++++++++++
 drivers/pinctrl/sprd/pinctrl-sprd.h        |   67 ++
 7 files changed, 2173 insertions(+)
 create mode 100644 drivers/pinctrl/sprd/Kconfig
 create mode 100644 drivers/pinctrl/sprd/Makefile
 create mode 100644 drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
 create mode 100644 drivers/pinctrl/sprd/pinctrl-sprd.c
 create mode 100644 drivers/pinctrl/sprd/pinctrl-sprd.h

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 8f8c2af..681e593 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -304,6 +304,7 @@ source "drivers/pinctrl/ti/Kconfig"
 source "drivers/pinctrl/uniphier/Kconfig"
 source "drivers/pinctrl/vt8500/Kconfig"
 source "drivers/pinctrl/mediatek/Kconfig"
+source "drivers/pinctrl/sprd/Kconfig"
 
 config PINCTRL_XWAY
 	bool
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index a251f43..006e352 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -57,3 +57,4 @@ obj-y				+= ti/
 obj-$(CONFIG_PINCTRL_UNIPHIER)	+= uniphier/
 obj-$(CONFIG_ARCH_VT8500)	+= vt8500/
 obj-$(CONFIG_PINCTRL_MTK)	+= mediatek/
+obj-y				+= sprd/
diff --git a/drivers/pinctrl/sprd/Kconfig b/drivers/pinctrl/sprd/Kconfig
new file mode 100644
index 0000000..6f4a7f9
--- /dev/null
+++ b/drivers/pinctrl/sprd/Kconfig
@@ -0,0 +1,17 @@
+#
+# Spreadtrum pin control drivers
+#
+
+config PINCTRL_SPRD
+	bool "Spreadtrum pinctrl driver"
+	select PINMUX
+	select PINCONF
+	select GENERIC_PINCONF
+	select GENERIC_PINMUX_FUNCTIONS
+	help
+	  Say Y here to enable Spreadtrum pinctrl driver
+
+config PINCTRL_SPRD_SC9860
+	bool "Spreadtrum SC9860 pinctrl driver"
+	help
+	  Say Y here to enable Spreadtrum SC9860 pinctrl driver
diff --git a/drivers/pinctrl/sprd/Makefile b/drivers/pinctrl/sprd/Makefile
new file mode 100644
index 0000000..b6caa8c
--- /dev/null
+++ b/drivers/pinctrl/sprd/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_PINCTRL_SPRD)		+= pinctrl-sprd.o
+obj-$(CONFIG_PINCTRL_SPRD_SC9860)	+= pinctrl-sprd-sc9860.o
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
new file mode 100644
index 0000000..3cdad8b
--- /dev/null
+++ b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
@@ -0,0 +1,972 @@
+/*
+ * Spreadtrum pin controller driver
+ * Copyright (C) 2017 Spreadtrum  - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-sprd.h"
+
+enum sprd_sc9860_pins {
+	/* pin global control register 0 */
+	SC9860_VIO28_0_IRTE = SPRD_PIN_INFO(0, GLOBAL_CTRL_PIN, 11, 1, 0),
+	SC9860_VIO_SD2_IRTE = SPRD_PIN_INFO(1, GLOBAL_CTRL_PIN, 10, 1, 0),
+	SC9860_VIO_SD0_IRTE = SPRD_PIN_INFO(2, GLOBAL_CTRL_PIN, 9, 1, 0),
+	SC9860_VIO_SIM2_IRTE = SPRD_PIN_INFO(3, GLOBAL_CTRL_PIN, 8, 1, 0),
+	SC9860_VIO_SIM1_IRTE = SPRD_PIN_INFO(4, GLOBAL_CTRL_PIN, 7, 1, 0),
+	SC9860_VIO_SIM0_IRTE = SPRD_PIN_INFO(5, GLOBAL_CTRL_PIN, 6, 1, 0),
+	SC9860_VIO28_0_MS = SPRD_PIN_INFO(6, GLOBAL_CTRL_PIN, 5, 1, 0),
+	SC9860_VIO_SD2_MS = SPRD_PIN_INFO(7, GLOBAL_CTRL_PIN, 4, 1, 0),
+	SC9860_VIO_SD0_MS = SPRD_PIN_INFO(8, GLOBAL_CTRL_PIN, 3, 1, 0),
+	SC9860_VIO_SIM2_MS = SPRD_PIN_INFO(9, GLOBAL_CTRL_PIN, 2, 1, 0),
+	SC9860_VIO_SIM1_MS = SPRD_PIN_INFO(10, GLOBAL_CTRL_PIN, 1, 1, 0),
+	SC9860_VIO_SIM0_MS = SPRD_PIN_INFO(11, GLOBAL_CTRL_PIN, 0, 1, 0),
+
+	/* pin global control register 2 */
+	SC9860_SPSPI_PIN_IN_SEL = SPRD_PIN_INFO(12, GLOBAL_CTRL_PIN, 31, 1, 2),
+	SC9860_UART1_USB30_PHY_SEL = SPRD_PIN_INFO(13, GLOBAL_CTRL_PIN, 30, 1, 2),
+	SC9860_USB30_PHY_DM_OE = SPRD_PIN_INFO(14, GLOBAL_CTRL_PIN, 29, 1, 2),
+	SC9860_USB30_PHY_DP_OE = SPRD_PIN_INFO(15, GLOBAL_CTRL_PIN, 28, 1, 2),
+	SC9860_UART5_SYS_SEL = SPRD_PIN_INFO(16, GLOBAL_CTRL_PIN, 25, 3, 2),
+	SC9860_ORP_URXD_PIN_IN_SEL = SPRD_PIN_INFO(17, GLOBAL_CTRL_PIN, 24, 1, 2),
+	SC9860_SIM2_SYS_SEL = SPRD_PIN_INFO(18, GLOBAL_CTRL_PIN, 23, 1, 2),
+	SC9860_SIM1_SYS_SEL = SPRD_PIN_INFO(19, GLOBAL_CTRL_PIN, 22, 1, 2),
+	SC9860_SIM0_SYS_SEL = SPRD_PIN_INFO(20, GLOBAL_CTRL_PIN, 21, 1, 2),
+	SC9860_CLK26MHZ_BUF_OUT_SEL = SPRD_PIN_INFO(21, GLOBAL_CTRL_PIN, 20, 1, 2),
+	SC9860_UART4_SYS_SEL = SPRD_PIN_INFO(22, GLOBAL_CTRL_PIN, 16, 3, 2),
+	SC9860_UART3_SYS_SEL = SPRD_PIN_INFO(23, GLOBAL_CTRL_PIN, 13, 3, 2),
+	SC9860_UART2_SYS_SEL = SPRD_PIN_INFO(24, GLOBAL_CTRL_PIN, 10, 3, 2),
+	SC9860_UART1_SYS_SEL = SPRD_PIN_INFO(25, GLOBAL_CTRL_PIN, 7, 3, 2),
+	SC9860_UART0_SYS_SEL = SPRD_PIN_INFO(26, GLOBAL_CTRL_PIN, 4, 3, 2),
+	SC9860_UART24_LOOP_SEL = SPRD_PIN_INFO(27, GLOBAL_CTRL_PIN, 3, 1, 2),
+	SC9860_UART23_LOOP_SEL = SPRD_PIN_INFO(28, GLOBAL_CTRL_PIN, 2, 1, 2),
+	SC9860_UART14_LOOP_SEL = SPRD_PIN_INFO(29, GLOBAL_CTRL_PIN, 1, 1, 2),
+	SC9860_UART13_LOOP_SEL = SPRD_PIN_INFO(30, GLOBAL_CTRL_PIN, 0, 1, 2),
+
+	/* pin global control register 3 */
+	SC9860_IIS3_SYS_SEL = SPRD_PIN_INFO(31, GLOBAL_CTRL_PIN, 18, 4, 3),
+	SC9860_IIS2_SYS_SEL = SPRD_PIN_INFO(32, GLOBAL_CTRL_PIN, 14, 4, 3),
+	SC9860_IIS1_SYS_SEL = SPRD_PIN_INFO(33, GLOBAL_CTRL_PIN, 10, 4, 3),
+	SC9860_IIS0_SYS_SEL = SPRD_PIN_INFO(34, GLOBAL_CTRL_PIN, 6, 4, 3),
+	SC9860_IIS23_LOOP_SEL = SPRD_PIN_INFO(35, GLOBAL_CTRL_PIN, 5, 1, 3),
+	SC9860_IIS13_LOOP_SEL = SPRD_PIN_INFO(36, GLOBAL_CTRL_PIN, 4, 1, 3),
+	SC9860_IIS12_LOOP_SEL = SPRD_PIN_INFO(37, GLOBAL_CTRL_PIN, 3, 1, 3),
+	SC9860_IIS03_LOOP_SEL = SPRD_PIN_INFO(38, GLOBAL_CTRL_PIN, 2, 1, 3),
+	SC9860_IIS02_LOOP_SEL = SPRD_PIN_INFO(39, GLOBAL_CTRL_PIN, 1, 1, 3),
+	SC9860_IIS01_LOOP_SEL = SPRD_PIN_INFO(40, GLOBAL_CTRL_PIN, 0, 1, 3),
+
+	/* pin global control register 4 */
+	SC9860_IIS6_SYS_SEL = SPRD_PIN_INFO(41, GLOBAL_CTRL_PIN, 27, 4, 4),
+	SC9860_IIS5_SYS_SEL = SPRD_PIN_INFO(42, GLOBAL_CTRL_PIN, 23, 4, 4),
+	SC9860_IIS4_SYS_SEL = SPRD_PIN_INFO(43, GLOBAL_CTRL_PIN, 19, 4, 4),
+	SC9860_I2C_INF6_SYS_SEL = SPRD_PIN_INFO(44, GLOBAL_CTRL_PIN, 8, 2, 4),
+	SC9860_I2C_INF4_SYS_SEL = SPRD_PIN_INFO(45, GLOBAL_CTRL_PIN, 6, 2, 4),
+	SC9860_I2C_INF2_SYS_SEL = SPRD_PIN_INFO(46, GLOBAL_CTRL_PIN, 4, 2, 4),
+	SC9860_I2C_INF1_SYS_SEL = SPRD_PIN_INFO(47, GLOBAL_CTRL_PIN, 2, 2, 4),
+	SC9860_I2C_INF0_SYS_SEL = SPRD_PIN_INFO(48, GLOBAL_CTRL_PIN, 0, 2, 4),
+
+	/* pin global control register 5 */
+	SC9860_GPIO_INF7_SYS_SEL = SPRD_PIN_INFO(49, GLOBAL_CTRL_PIN, 27, 1, 5),
+	SC9860_GPIO_INF6_SYS_SEL = SPRD_PIN_INFO(50, GLOBAL_CTRL_PIN, 26, 1, 5),
+	SC9860_GPIO_INF5_SYS_SEL = SPRD_PIN_INFO(51, GLOBAL_CTRL_PIN, 25, 1, 5),
+	SC9860_GPIO_INF4_SYS_SEL = SPRD_PIN_INFO(52, GLOBAL_CTRL_PIN, 24, 1, 5),
+	SC9860_GPIO_INF3_SYS_SEL = SPRD_PIN_INFO(53, GLOBAL_CTRL_PIN, 23, 1, 5),
+	SC9860_GPIO_INF2_SYS_SEL = SPRD_PIN_INFO(54, GLOBAL_CTRL_PIN, 22, 1, 5),
+	SC9860_GPIO_INF1_SYS_SEL = SPRD_PIN_INFO(55, GLOBAL_CTRL_PIN, 21, 1, 5),
+	SC9860_GPIO_INF0_SYS_SEL = SPRD_PIN_INFO(56, GLOBAL_CTRL_PIN, 20, 1, 5),
+	SC9860_WDRST_OUT_SEL = SPRD_PIN_INFO(57, GLOBAL_CTRL_PIN, 16, 3, 5),
+	SC9860_ADI_SYNC_PIN_OUT_SEL = SPRD_PIN_INFO(58, GLOBAL_CTRL_PIN, 14, 1, 5),
+	SC9860_CMRST_SEL = SPRD_PIN_INFO(59, GLOBAL_CTRL_PIN, 13, 1, 5),
+	SC9860_CMPD_SEL = SPRD_PIN_INFO(60, GLOBAL_CTRL_PIN, 12, 1, 5),
+	SC9860_TEST_DBG_MODE11 = SPRD_PIN_INFO(61, GLOBAL_CTRL_PIN, 11, 1, 5),
+	SC9860_TEST_DBG_MODE10 = SPRD_PIN_INFO(62, GLOBAL_CTRL_PIN, 10, 1, 5),
+	SC9860_TEST_DBG_MODE9 = SPRD_PIN_INFO(63, GLOBAL_CTRL_PIN, 9, 1, 5),
+	SC9860_TEST_DBG_MODE8 = SPRD_PIN_INFO(64, GLOBAL_CTRL_PIN, 8, 1, 5),
+	SC9860_TEST_DBG_MODE7 = SPRD_PIN_INFO(65, GLOBAL_CTRL_PIN, 7, 1, 5),
+	SC9860_TEST_DBG_MODE6 = SPRD_PIN_INFO(66, GLOBAL_CTRL_PIN, 6, 1, 5),
+	SC9860_TEST_DBG_MODE5 = SPRD_PIN_INFO(67, GLOBAL_CTRL_PIN, 5, 1, 5),
+	SC9860_TEST_DBG_MODE4 = SPRD_PIN_INFO(68, GLOBAL_CTRL_PIN, 4, 1, 5),
+	SC9860_TEST_DBG_MODE3 = SPRD_PIN_INFO(69, GLOBAL_CTRL_PIN, 3, 1, 5),
+	SC9860_TEST_DBG_MODE2 = SPRD_PIN_INFO(70, GLOBAL_CTRL_PIN, 2, 1, 5),
+	SC9860_TEST_DBG_MODE1 = SPRD_PIN_INFO(71, GLOBAL_CTRL_PIN, 1, 1, 5),
+	SC9860_TEST_DBG_MODE0 = SPRD_PIN_INFO(72, GLOBAL_CTRL_PIN, 0, 1, 5),
+
+	/* pin global control register 6 */
+	SC9860_SP_EIC_DPAD3_SEL = SPRD_PIN_INFO(73, GLOBAL_CTRL_PIN, 24, 8, 6),
+	SC9860_SP_EIC_DPAD2_SEL = SPRD_PIN_INFO(74, GLOBAL_CTRL_PIN, 16, 8, 6),
+	SC9860_SP_EIC_DPAD1_SEL = SPRD_PIN_INFO(75, GLOBAL_CTRL_PIN, 8, 8, 6),
+	SC9860_SP_EIC_DPAD0_SEL = SPRD_PIN_INFO(76, GLOBAL_CTRL_PIN, 0, 8, 6),
+
+	/* pin global control register 7 */
+	SC9860_SP_EIC_DPAD7_SEL = SPRD_PIN_INFO(77, GLOBAL_CTRL_PIN, 24, 8, 7),
+	SC9860_SP_EIC_DPAD6_SEL = SPRD_PIN_INFO(78, GLOBAL_CTRL_PIN, 16, 8, 7),
+	SC9860_SP_EIC_DPAD5_SEL = SPRD_PIN_INFO(79, GLOBAL_CTRL_PIN, 8, 8, 7),
+	SC9860_SP_EIC_DPAD4_SEL = SPRD_PIN_INFO(80, GLOBAL_CTRL_PIN, 0, 8, 7),
+
+	/* common pin registers definitions */
+	SC9860_RFCTL20 = SPRD_PIN_INFO(81, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL21 = SPRD_PIN_INFO(83, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL30 = SPRD_PIN_INFO(85, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL31 = SPRD_PIN_INFO(87, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL32 = SPRD_PIN_INFO(89, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL33 = SPRD_PIN_INFO(91, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL34 = SPRD_PIN_INFO(93, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL35 = SPRD_PIN_INFO(95, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL36 = SPRD_PIN_INFO(97, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL37 = SPRD_PIN_INFO(99, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL22 = SPRD_PIN_INFO(101, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL23 = SPRD_PIN_INFO(103, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL24 = SPRD_PIN_INFO(105, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL25 = SPRD_PIN_INFO(107, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL26 = SPRD_PIN_INFO(109, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL27 = SPRD_PIN_INFO(111, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL28 = SPRD_PIN_INFO(113, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL29 = SPRD_PIN_INFO(115, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL2 = SPRD_PIN_INFO(117, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA2 = SPRD_PIN_INFO(119, COMMON_PIN, 0, 0, 0),
+	SC9860_MTCK_ARM = SPRD_PIN_INFO(121, COMMON_PIN, 0, 0, 0),
+	SC9860_MTMS_ARM = SPRD_PIN_INFO(123, COMMON_PIN, 0, 0, 0),
+	SC9860_XTL_EN0 = SPRD_PIN_INFO(125, COMMON_PIN, 0, 0, 0),
+	SC9860_PTEST = SPRD_PIN_INFO(127, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_DAD1 = SPRD_PIN_INFO(129, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_ADD0 = SPRD_PIN_INFO(131, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_ADSYNC = SPRD_PIN_INFO(133, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_SCLK = SPRD_PIN_INFO(135, COMMON_PIN, 0, 0, 0),
+	SC9860_CHIP_SLEEP = SPRD_PIN_INFO(137, COMMON_PIN, 0, 0, 0),
+	SC9860_CLK_32K = SPRD_PIN_INFO(139, COMMON_PIN, 0, 0, 0),
+	SC9860_DCDC_ARM_EN = SPRD_PIN_INFO(141, COMMON_PIN, 0, 0, 0),
+	SC9860_EXT_RST_B = SPRD_PIN_INFO(143, COMMON_PIN, 0, 0, 0),
+	SC9860_ADI_D = SPRD_PIN_INFO(145, COMMON_PIN, 0, 0, 0),
+	SC9860_ADI_SCLK = SPRD_PIN_INFO(147, COMMON_PIN, 0, 0, 0),
+	SC9860_XTL_EN1 = SPRD_PIN_INFO(149, COMMON_PIN, 0, 0, 0),
+	SC9860_ANA_INT = SPRD_PIN_INFO(151, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_DAD0 = SPRD_PIN_INFO(153, COMMON_PIN, 0, 0, 0),
+	SC9860_AUD_DASYNC = SPRD_PIN_INFO(155, COMMON_PIN, 0, 0, 0),
+	SC9860_LCM_RSTN = SPRD_PIN_INFO(157, COMMON_PIN, 0, 0, 0),
+	SC9860_DSI_TE = SPRD_PIN_INFO(159, COMMON_PIN, 0, 0, 0),
+	SC9860_PWMA = SPRD_PIN_INFO(161, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT0 = SPRD_PIN_INFO(163, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT1 = SPRD_PIN_INFO(165, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA1 = SPRD_PIN_INFO(167, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL1 = SPRD_PIN_INFO(169, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMCLK2 = SPRD_PIN_INFO(171, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMDA2 = SPRD_PIN_INFO(173, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMRST2 = SPRD_PIN_INFO(175, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMCLK1 = SPRD_PIN_INFO(177, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMDA1 = SPRD_PIN_INFO(179, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMRST1 = SPRD_PIN_INFO(181, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMCLK0 = SPRD_PIN_INFO(183, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMDA0 = SPRD_PIN_INFO(185, COMMON_PIN, 0, 0, 0),
+	SC9860_SIMRST0 = SPRD_PIN_INFO(187, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_CMD = SPRD_PIN_INFO(189, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D0 = SPRD_PIN_INFO(191, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D1 = SPRD_PIN_INFO(193, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_CLK = SPRD_PIN_INFO(195, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D2 = SPRD_PIN_INFO(197, COMMON_PIN, 0, 0, 0),
+	SC9860_SD2_D3 = SPRD_PIN_INFO(199, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D3 = SPRD_PIN_INFO(201, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D2 = SPRD_PIN_INFO(203, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_CMD = SPRD_PIN_INFO(205, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D0 = SPRD_PIN_INFO(207, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_D1 = SPRD_PIN_INFO(209, COMMON_PIN, 0, 0, 0),
+	SC9860_SD0_CLK = SPRD_PIN_INFO(211, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD_reserved = SPRD_PIN_INFO(213, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD = SPRD_PIN_INFO(215, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D6 = SPRD_PIN_INFO(217, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D7 = SPRD_PIN_INFO(219, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_CLK = SPRD_PIN_INFO(221, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D5 = SPRD_PIN_INFO(223, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D4 = SPRD_PIN_INFO(225, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_DS = SPRD_PIN_INFO(227, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D3_reserved = SPRD_PIN_INFO(229, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D3 = SPRD_PIN_INFO(231, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_RST = SPRD_PIN_INFO(233, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D1 = SPRD_PIN_INFO(235, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D2 = SPRD_PIN_INFO(237, COMMON_PIN, 0, 0, 0),
+	SC9860_EMMC_D0 = SPRD_PIN_INFO(239, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0DI = SPRD_PIN_INFO(241, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0DO = SPRD_PIN_INFO(243, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0CLK = SPRD_PIN_INFO(245, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS0LRCK = SPRD_PIN_INFO(247, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_CLK = SPRD_PIN_INFO(249, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_CMD = SPRD_PIN_INFO(251, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D0 = SPRD_PIN_INFO(253, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D1 = SPRD_PIN_INFO(255, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D2 = SPRD_PIN_INFO(257, COMMON_PIN, 0, 0, 0),
+	SC9860_SD1_D3 = SPRD_PIN_INFO(259, COMMON_PIN, 0, 0, 0),
+	SC9860_CLK_AUX0 = SPRD_PIN_INFO(261, COMMON_PIN, 0, 0, 0),
+	SC9860_WIFI_COEXIST = SPRD_PIN_INFO(263, COMMON_PIN, 0, 0, 0),
+	SC9860_BEIDOU_COEXIST = SPRD_PIN_INFO(265, COMMON_PIN, 0, 0, 0),
+	SC9860_U3TXD = SPRD_PIN_INFO(267, COMMON_PIN, 0, 0, 0),
+	SC9860_U3RXD = SPRD_PIN_INFO(269, COMMON_PIN, 0, 0, 0),
+	SC9860_U3CTS = SPRD_PIN_INFO(271, COMMON_PIN, 0, 0, 0),
+	SC9860_U3RTS = SPRD_PIN_INFO(273, COMMON_PIN, 0, 0, 0),
+	SC9860_U0TXD = SPRD_PIN_INFO(275, COMMON_PIN, 0, 0, 0),
+	SC9860_U0RXD = SPRD_PIN_INFO(277, COMMON_PIN, 0, 0, 0),
+	SC9860_U0CTS = SPRD_PIN_INFO(279, COMMON_PIN, 0, 0, 0),
+	SC9860_U0RTS = SPRD_PIN_INFO(281, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1DI = SPRD_PIN_INFO(283, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1DO = SPRD_PIN_INFO(285, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1CLK = SPRD_PIN_INFO(287, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS1LRCK = SPRD_PIN_INFO(289, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_CSN = SPRD_PIN_INFO(291, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_DO = SPRD_PIN_INFO(293, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_DI = SPRD_PIN_INFO(295, COMMON_PIN, 0, 0, 0),
+	SC9860_SPI0_CLK = SPRD_PIN_INFO(297, COMMON_PIN, 0, 0, 0),
+	SC9860_U2TXD = SPRD_PIN_INFO(299, COMMON_PIN, 0, 0, 0),
+	SC9860_U2RXD = SPRD_PIN_INFO(301, COMMON_PIN, 0, 0, 0),
+	SC9860_U4TXD = SPRD_PIN_INFO(303, COMMON_PIN, 0, 0, 0),
+	SC9860_U4RXD = SPRD_PIN_INFO(305, COMMON_PIN, 0, 0, 0),
+	SC9860_CMMCLK1 = SPRD_PIN_INFO(307, COMMON_PIN, 0, 0, 0),
+	SC9860_CMRST1 = SPRD_PIN_INFO(309, COMMON_PIN, 0, 0, 0),
+	SC9860_CMMCLK0 = SPRD_PIN_INFO(311, COMMON_PIN, 0, 0, 0),
+	SC9860_CMRST0 = SPRD_PIN_INFO(313, COMMON_PIN, 0, 0, 0),
+	SC9860_CMPD0 = SPRD_PIN_INFO(315, COMMON_PIN, 0, 0, 0),
+	SC9860_CMPD1 = SPRD_PIN_INFO(317, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL0 = SPRD_PIN_INFO(319, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA0 = SPRD_PIN_INFO(321, COMMON_PIN, 0, 0, 0),
+	SC9860_SDA6 = SPRD_PIN_INFO(323, COMMON_PIN, 0, 0, 0),
+	SC9860_SCL6 = SPRD_PIN_INFO(325, COMMON_PIN, 0, 0, 0),
+	SC9860_U1TXD = SPRD_PIN_INFO(327, COMMON_PIN, 0, 0, 0),
+	SC9860_U1RXD = SPRD_PIN_INFO(329, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYOUT0 = SPRD_PIN_INFO(331, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYOUT1 = SPRD_PIN_INFO(333, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYOUT2 = SPRD_PIN_INFO(335, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYIN0 = SPRD_PIN_INFO(337, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYIN1 = SPRD_PIN_INFO(339, COMMON_PIN, 0, 0, 0),
+	SC9860_KEYIN2 = SPRD_PIN_INFO(341, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3DI = SPRD_PIN_INFO(343, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3DO = SPRD_PIN_INFO(345, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3CLK = SPRD_PIN_INFO(347, COMMON_PIN, 0, 0, 0),
+	SC9860_IIS3LRCK = SPRD_PIN_INFO(349, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL0 = SPRD_PIN_INFO(351, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL1 = SPRD_PIN_INFO(353, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL10 = SPRD_PIN_INFO(355, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL11 = SPRD_PIN_INFO(357, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL12 = SPRD_PIN_INFO(359, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL13 = SPRD_PIN_INFO(361, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL14 = SPRD_PIN_INFO(363, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL15 = SPRD_PIN_INFO(365, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL16 = SPRD_PIN_INFO(367, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL17 = SPRD_PIN_INFO(369, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL18 = SPRD_PIN_INFO(371, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL19 = SPRD_PIN_INFO(373, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL2 = SPRD_PIN_INFO(375, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT5 = SPRD_PIN_INFO(377, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT6 = SPRD_PIN_INFO(379, COMMON_PIN, 0, 0, 0),
+	SC9860_EXTINT7 = SPRD_PIN_INFO(381, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO30 = SPRD_PIN_INFO(383, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO31 = SPRD_PIN_INFO(385, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO32 = SPRD_PIN_INFO(387, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO33 = SPRD_PIN_INFO(389, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO34 = SPRD_PIN_INFO(391, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL3 = SPRD_PIN_INFO(393, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL4 = SPRD_PIN_INFO(395, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL5 = SPRD_PIN_INFO(397, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL6 = SPRD_PIN_INFO(399, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL7 = SPRD_PIN_INFO(401, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL8 = SPRD_PIN_INFO(403, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL9 = SPRD_PIN_INFO(405, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE0_SCK0 = SPRD_PIN_INFO(407, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO38 = SPRD_PIN_INFO(409, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE0_SDA0 = SPRD_PIN_INFO(411, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO39 = SPRD_PIN_INFO(413, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE1_SCK0 = SPRD_PIN_INFO(415, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO181 = SPRD_PIN_INFO(417, COMMON_PIN, 0, 0, 0),
+	SC9860_RFFE1_SDA0 = SPRD_PIN_INFO(419, COMMON_PIN, 0, 0, 0),
+	SC9860_GPIO182 = SPRD_PIN_INFO(421, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_ADC_ON = SPRD_PIN_INFO(423, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_DAC_ON = SPRD_PIN_INFO(425, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSCK0 = SPRD_PIN_INFO(427, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSDA0 = SPRD_PIN_INFO(429, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSEN0 = SPRD_PIN_INFO(431, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_ADC_ON = SPRD_PIN_INFO(433, COMMON_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_DAC_ON = SPRD_PIN_INFO(435, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSCK1 = SPRD_PIN_INFO(437, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSDA1 = SPRD_PIN_INFO(439, COMMON_PIN, 0, 0, 0),
+	SC9860_RFSEN1 = SPRD_PIN_INFO(441, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL38 = SPRD_PIN_INFO(443, COMMON_PIN, 0, 0, 0),
+	SC9860_RFCTL39 = SPRD_PIN_INFO(445, COMMON_PIN, 0, 0, 0),
+
+	/* MSIC pin registers definitions */
+	SC9860_RFCTL20_MISC = SPRD_PIN_INFO(82, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL21_MISC = SPRD_PIN_INFO(84, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL30_MISC = SPRD_PIN_INFO(86, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL31_MISC = SPRD_PIN_INFO(88, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL32_MISC = SPRD_PIN_INFO(90, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL33_MISC = SPRD_PIN_INFO(92, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL34_MISC = SPRD_PIN_INFO(94, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL35_MISC = SPRD_PIN_INFO(96, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL36_MISC = SPRD_PIN_INFO(98, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL37_MISC = SPRD_PIN_INFO(100, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL22_MISC = SPRD_PIN_INFO(102, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL23_MISC = SPRD_PIN_INFO(104, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL24_MISC = SPRD_PIN_INFO(106, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL25_MISC = SPRD_PIN_INFO(108, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL26_MISC = SPRD_PIN_INFO(110, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL27_MISC = SPRD_PIN_INFO(112, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL28_MISC = SPRD_PIN_INFO(114, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL29_MISC = SPRD_PIN_INFO(116, MISC_PIN, 0, 0, 0),
+	SC9860_SCL2_MISC = SPRD_PIN_INFO(118, MISC_PIN, 0, 0, 0),
+	SC9860_SDA2_MISC = SPRD_PIN_INFO(120, MISC_PIN, 0, 0, 0),
+	SC9860_MTCK_ARM_MISC = SPRD_PIN_INFO(122, MISC_PIN, 0, 0, 0),
+	SC9860_MTMS_ARM_MISC = SPRD_PIN_INFO(124, MISC_PIN, 0, 0, 0),
+	SC9860_XTL_EN0_MISC = SPRD_PIN_INFO(126, MISC_PIN, 0, 0, 0),
+	SC9860_PTEST_MISC = SPRD_PIN_INFO(128, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_DAD1_MISC = SPRD_PIN_INFO(130, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_ADD0_MISC = SPRD_PIN_INFO(132, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_ADSYNC_MISC = SPRD_PIN_INFO(134, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_SCLK_MISC = SPRD_PIN_INFO(136, MISC_PIN, 0, 0, 0),
+	SC9860_CHIP_SLEEP_MISC = SPRD_PIN_INFO(138, MISC_PIN, 0, 0, 0),
+	SC9860_CLK_32K_MISC = SPRD_PIN_INFO(140, MISC_PIN, 0, 0, 0),
+	SC9860_DCDC_ARM_EN_MISC = SPRD_PIN_INFO(142, MISC_PIN, 0, 0, 0),
+	SC9860_EXT_RST_B_MISC = SPRD_PIN_INFO(144, MISC_PIN, 0, 0, 0),
+	SC9860_ADI_D_MISC = SPRD_PIN_INFO(146, MISC_PIN, 0, 0, 0),
+	SC9860_ADI_SCLK_MISC = SPRD_PIN_INFO(148, MISC_PIN, 0, 0, 0),
+	SC9860_XTL_EN1_MISC = SPRD_PIN_INFO(150, MISC_PIN, 0, 0, 0),
+	SC9860_ANA_INT_MISC = SPRD_PIN_INFO(152, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_DAD0_MISC = SPRD_PIN_INFO(154, MISC_PIN, 0, 0, 0),
+	SC9860_AUD_DASYNC_MISC = SPRD_PIN_INFO(156, MISC_PIN, 0, 0, 0),
+	SC9860_LCM_RSTN_MISC = SPRD_PIN_INFO(158, MISC_PIN, 0, 0, 0),
+	SC9860_DSI_TE_MISC = SPRD_PIN_INFO(160, MISC_PIN, 0, 0, 0),
+	SC9860_PWMA_MISC = SPRD_PIN_INFO(162, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT0_MISC = SPRD_PIN_INFO(164, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT1_MISC = SPRD_PIN_INFO(166, MISC_PIN, 0, 0, 0),
+	SC9860_SDA1_MISC = SPRD_PIN_INFO(168, MISC_PIN, 0, 0, 0),
+	SC9860_SCL1_MISC = SPRD_PIN_INFO(170, MISC_PIN, 0, 0, 0),
+	SC9860_SIMCLK2_MISC = SPRD_PIN_INFO(172, MISC_PIN, 0, 0, 0),
+	SC9860_SIMDA2_MISC = SPRD_PIN_INFO(174, MISC_PIN, 0, 0, 0),
+	SC9860_SIMRST2_MISC = SPRD_PIN_INFO(176, MISC_PIN, 0, 0, 0),
+	SC9860_SIMCLK1_MISC = SPRD_PIN_INFO(178, MISC_PIN, 0, 0, 0),
+	SC9860_SIMDA1_MISC = SPRD_PIN_INFO(180, MISC_PIN, 0, 0, 0),
+	SC9860_SIMRST1_MISC = SPRD_PIN_INFO(182, MISC_PIN, 0, 0, 0),
+	SC9860_SIMCLK0_MISC = SPRD_PIN_INFO(184, MISC_PIN, 0, 0, 0),
+	SC9860_SIMDA0_MISC = SPRD_PIN_INFO(186, MISC_PIN, 0, 0, 0),
+	SC9860_SIMRST0_MISC = SPRD_PIN_INFO(188, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_CMD_MISC = SPRD_PIN_INFO(190, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D0_MISC = SPRD_PIN_INFO(192, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D1_MISC = SPRD_PIN_INFO(194, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_CLK_MISC = SPRD_PIN_INFO(196, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D2_MISC = SPRD_PIN_INFO(198, MISC_PIN, 0, 0, 0),
+	SC9860_SD2_D3_MISC = SPRD_PIN_INFO(200, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D3_MISC = SPRD_PIN_INFO(202, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D2_MISC = SPRD_PIN_INFO(204, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_CMD_MISC = SPRD_PIN_INFO(206, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D0_MISC = SPRD_PIN_INFO(208, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_D1_MISC = SPRD_PIN_INFO(210, MISC_PIN, 0, 0, 0),
+	SC9860_SD0_CLK_MISC = SPRD_PIN_INFO(212, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD_reserved_MISC = SPRD_PIN_INFO(214, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_CMD_MISC = SPRD_PIN_INFO(216, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D6_MISC = SPRD_PIN_INFO(218, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D7_MISC = SPRD_PIN_INFO(220, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_CLK_MISC = SPRD_PIN_INFO(222, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D5_MISC = SPRD_PIN_INFO(224, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D4_MISC = SPRD_PIN_INFO(226, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_DS_MISC = SPRD_PIN_INFO(228, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D3_reserved_MISC = SPRD_PIN_INFO(230, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D3_MISC = SPRD_PIN_INFO(232, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_RST_MISC = SPRD_PIN_INFO(234, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D1_MISC = SPRD_PIN_INFO(236, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D2_MISC = SPRD_PIN_INFO(238, MISC_PIN, 0, 0, 0),
+	SC9860_EMMC_D0_MISC = SPRD_PIN_INFO(240, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0DI_MISC = SPRD_PIN_INFO(242, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0DO_MISC = SPRD_PIN_INFO(244, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0CLK_MISC = SPRD_PIN_INFO(246, MISC_PIN, 0, 0, 0),
+	SC9860_IIS0LRCK_MISC = SPRD_PIN_INFO(248, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_CLK_MISC = SPRD_PIN_INFO(250, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_CMD_MISC = SPRD_PIN_INFO(252, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D0_MISC = SPRD_PIN_INFO(254, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D1_MISC = SPRD_PIN_INFO(256, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D2_MISC = SPRD_PIN_INFO(258, MISC_PIN, 0, 0, 0),
+	SC9860_SD1_D3_MISC = SPRD_PIN_INFO(260, MISC_PIN, 0, 0, 0),
+	SC9860_CLK_AUX0_MISC = SPRD_PIN_INFO(262, MISC_PIN, 0, 0, 0),
+	SC9860_WIFI_COEXIST_MISC = SPRD_PIN_INFO(264, MISC_PIN, 0, 0, 0),
+	SC9860_BEIDOU_COEXIST_MISC = SPRD_PIN_INFO(266, MISC_PIN, 0, 0, 0),
+	SC9860_U3TXD_MISC = SPRD_PIN_INFO(268, MISC_PIN, 0, 0, 0),
+	SC9860_U3RXD_MISC = SPRD_PIN_INFO(270, MISC_PIN, 0, 0, 0),
+	SC9860_U3CTS_MISC = SPRD_PIN_INFO(272, MISC_PIN, 0, 0, 0),
+	SC9860_U3RTS_MISC = SPRD_PIN_INFO(274, MISC_PIN, 0, 0, 0),
+	SC9860_U0TXD_MISC = SPRD_PIN_INFO(276, MISC_PIN, 0, 0, 0),
+	SC9860_U0RXD_MISC = SPRD_PIN_INFO(278, MISC_PIN, 0, 0, 0),
+	SC9860_U0CTS_MISC = SPRD_PIN_INFO(280, MISC_PIN, 0, 0, 0),
+	SC9860_U0RTS_MISC = SPRD_PIN_INFO(282, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1DI_MISC = SPRD_PIN_INFO(284, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1DO_MISC = SPRD_PIN_INFO(286, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1CLK_MISC = SPRD_PIN_INFO(288, MISC_PIN, 0, 0, 0),
+	SC9860_IIS1LRCK_MISC = SPRD_PIN_INFO(290, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_CSN_MISC = SPRD_PIN_INFO(292, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_DO_MISC = SPRD_PIN_INFO(294, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_DI_MISC = SPRD_PIN_INFO(296, MISC_PIN, 0, 0, 0),
+	SC9860_SPI0_CLK_MISC = SPRD_PIN_INFO(298, MISC_PIN, 0, 0, 0),
+	SC9860_U2TXD_MISC = SPRD_PIN_INFO(300, MISC_PIN, 0, 0, 0),
+	SC9860_U2RXD_MISC = SPRD_PIN_INFO(302, MISC_PIN, 0, 0, 0),
+	SC9860_U4TXD_MISC = SPRD_PIN_INFO(304, MISC_PIN, 0, 0, 0),
+	SC9860_U4RXD_MISC = SPRD_PIN_INFO(306, MISC_PIN, 0, 0, 0),
+	SC9860_CMMCLK1_MISC = SPRD_PIN_INFO(308, MISC_PIN, 0, 0, 0),
+	SC9860_CMRST1_MISC = SPRD_PIN_INFO(310, MISC_PIN, 0, 0, 0),
+	SC9860_CMMCLK0_MISC = SPRD_PIN_INFO(312, MISC_PIN, 0, 0, 0),
+	SC9860_CMRST0_MISC = SPRD_PIN_INFO(314, MISC_PIN, 0, 0, 0),
+	SC9860_CMPD0_MISC = SPRD_PIN_INFO(316, MISC_PIN, 0, 0, 0),
+	SC9860_CMPD1_MISC = SPRD_PIN_INFO(318, MISC_PIN, 0, 0, 0),
+	SC9860_SCL0_MISC = SPRD_PIN_INFO(320, MISC_PIN, 0, 0, 0),
+	SC9860_SDA0_MISC = SPRD_PIN_INFO(322, MISC_PIN, 0, 0, 0),
+	SC9860_SDA6_MISC = SPRD_PIN_INFO(324, MISC_PIN, 0, 0, 0),
+	SC9860_SCL6_MISC = SPRD_PIN_INFO(326, MISC_PIN, 0, 0, 0),
+	SC9860_U1TXD_MISC = SPRD_PIN_INFO(328, MISC_PIN, 0, 0, 0),
+	SC9860_U1RXD_MISC = SPRD_PIN_INFO(330, MISC_PIN, 0, 0, 0),
+	SC9860_KEYOUT0_MISC = SPRD_PIN_INFO(332, MISC_PIN, 0, 0, 0),
+	SC9860_KEYOUT1_MISC = SPRD_PIN_INFO(334, MISC_PIN, 0, 0, 0),
+	SC9860_KEYOUT2_MISC = SPRD_PIN_INFO(336, MISC_PIN, 0, 0, 0),
+	SC9860_KEYIN0_MISC = SPRD_PIN_INFO(338, MISC_PIN, 0, 0, 0),
+	SC9860_KEYIN1_MISC = SPRD_PIN_INFO(340, MISC_PIN, 0, 0, 0),
+	SC9860_KEYIN2_MISC = SPRD_PIN_INFO(342, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3DI_MISC = SPRD_PIN_INFO(344, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3DO_MISC = SPRD_PIN_INFO(346, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3CLK_MISC = SPRD_PIN_INFO(348, MISC_PIN, 0, 0, 0),
+	SC9860_IIS3LRCK_MISC = SPRD_PIN_INFO(350, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL0_MISC = SPRD_PIN_INFO(352, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL1_MISC = SPRD_PIN_INFO(354, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL10_MISC = SPRD_PIN_INFO(356, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL11_MISC = SPRD_PIN_INFO(358, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL12_MISC = SPRD_PIN_INFO(360, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL13_MISC = SPRD_PIN_INFO(362, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL14_MISC = SPRD_PIN_INFO(364, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL15_MISC = SPRD_PIN_INFO(366, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL16_MISC = SPRD_PIN_INFO(368, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL17_MISC = SPRD_PIN_INFO(370, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL18_MISC = SPRD_PIN_INFO(372, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL19_MISC = SPRD_PIN_INFO(374, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL2_MISC = SPRD_PIN_INFO(376, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT5_MISC = SPRD_PIN_INFO(378, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT6_MISC = SPRD_PIN_INFO(380, MISC_PIN, 0, 0, 0),
+	SC9860_EXTINT7_MISC = SPRD_PIN_INFO(382, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO30_MISC = SPRD_PIN_INFO(384, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO31_MISC = SPRD_PIN_INFO(386, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO32_MISC = SPRD_PIN_INFO(388, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO33_MISC = SPRD_PIN_INFO(390, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO34_MISC = SPRD_PIN_INFO(392, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL3_MISC = SPRD_PIN_INFO(394, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL4_MISC = SPRD_PIN_INFO(396, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL5_MISC = SPRD_PIN_INFO(398, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL6_MISC = SPRD_PIN_INFO(400, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL7_MISC = SPRD_PIN_INFO(402, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL8_MISC = SPRD_PIN_INFO(404, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL9_MISC = SPRD_PIN_INFO(406, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE0_SCK0_MISC = SPRD_PIN_INFO(408, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO38_MISC = SPRD_PIN_INFO(410, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE0_SDA0_MISC = SPRD_PIN_INFO(412, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO39_MISC = SPRD_PIN_INFO(414, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE1_SCK0_MISC = SPRD_PIN_INFO(416, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO181_MISC = SPRD_PIN_INFO(418, MISC_PIN, 0, 0, 0),
+	SC9860_RFFE1_SDA0_MISC = SPRD_PIN_INFO(420, MISC_PIN, 0, 0, 0),
+	SC9860_GPIO182_MISC = SPRD_PIN_INFO(422, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_ADC_ON_MISC = SPRD_PIN_INFO(424, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS0_DAC_ON_MISC = SPRD_PIN_INFO(426, MISC_PIN, 0, 0, 0),
+	SC9860_RFSCK0_MISC = SPRD_PIN_INFO(428, MISC_PIN, 0, 0, 0),
+	SC9860_RFSDA0_MISC = SPRD_PIN_INFO(430, MISC_PIN, 0, 0, 0),
+	SC9860_RFSEN0_MISC = SPRD_PIN_INFO(432, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_ADC_ON_MISC = SPRD_PIN_INFO(434, MISC_PIN, 0, 0, 0),
+	SC9860_RF_LVDS1_DAC_ON_MISC = SPRD_PIN_INFO(436, MISC_PIN, 0, 0, 0),
+	SC9860_RFSCK1_MISC = SPRD_PIN_INFO(438, MISC_PIN, 0, 0, 0),
+	SC9860_RFSDA1_MISC = SPRD_PIN_INFO(440, MISC_PIN, 0, 0, 0),
+	SC9860_RFSEN1_MISC = SPRD_PIN_INFO(442, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL38_MISC = SPRD_PIN_INFO(444, MISC_PIN, 0, 0, 0),
+	SC9860_RFCTL39_MISC = SPRD_PIN_INFO(446, MISC_PIN, 0, 0, 0),
+};
+
+static struct sprd_pins_info sprd_sc9860_pins_info[] = {
+	SPRD_PINCTRL_PIN(SC9860_VIO28_0_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD2_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD0_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM2_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM1_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM0_IRTE),
+	SPRD_PINCTRL_PIN(SC9860_VIO28_0_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD2_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SD0_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM2_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM1_MS),
+	SPRD_PINCTRL_PIN(SC9860_VIO_SIM0_MS),
+	SPRD_PINCTRL_PIN(SC9860_SPSPI_PIN_IN_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART1_USB30_PHY_SEL),
+	SPRD_PINCTRL_PIN(SC9860_USB30_PHY_DM_OE),
+	SPRD_PINCTRL_PIN(SC9860_USB30_PHY_DP_OE),
+	SPRD_PINCTRL_PIN(SC9860_UART5_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_ORP_URXD_PIN_IN_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SIM2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SIM1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SIM0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_CLK26MHZ_BUF_OUT_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART3_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART24_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART23_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART14_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_UART13_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS3_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS23_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS13_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS12_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS03_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS02_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS01_LOOP_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS6_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS5_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_IIS4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF6_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_I2C_INF0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF7_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF6_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF5_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF4_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF3_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF2_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF1_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_GPIO_INF0_SYS_SEL),
+	SPRD_PINCTRL_PIN(SC9860_WDRST_OUT_SEL),
+	SPRD_PINCTRL_PIN(SC9860_ADI_SYNC_PIN_OUT_SEL),
+	SPRD_PINCTRL_PIN(SC9860_CMRST_SEL),
+	SPRD_PINCTRL_PIN(SC9860_CMPD_SEL),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE11),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE10),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE9),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE8),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE7),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE6),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE5),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE4),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE3),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE2),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE1),
+	SPRD_PINCTRL_PIN(SC9860_TEST_DBG_MODE0),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD3_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD2_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD1_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD0_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD7_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD6_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD5_SEL),
+	SPRD_PINCTRL_PIN(SC9860_SP_EIC_DPAD4_SEL),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL20),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL21),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL30),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL31),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL32),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL33),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL34),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL35),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL36),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL37),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL22),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL23),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL24),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL25),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL26),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL27),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL28),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL29),
+	SPRD_PINCTRL_PIN(SC9860_SCL2),
+	SPRD_PINCTRL_PIN(SC9860_SDA2),
+	SPRD_PINCTRL_PIN(SC9860_MTCK_ARM),
+	SPRD_PINCTRL_PIN(SC9860_MTMS_ARM),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN0),
+	SPRD_PINCTRL_PIN(SC9860_PTEST),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD1),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADD0),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADSYNC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_SCLK),
+	SPRD_PINCTRL_PIN(SC9860_CHIP_SLEEP),
+	SPRD_PINCTRL_PIN(SC9860_CLK_32K),
+	SPRD_PINCTRL_PIN(SC9860_DCDC_ARM_EN),
+	SPRD_PINCTRL_PIN(SC9860_EXT_RST_B),
+	SPRD_PINCTRL_PIN(SC9860_ADI_D),
+	SPRD_PINCTRL_PIN(SC9860_ADI_SCLK),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN1),
+	SPRD_PINCTRL_PIN(SC9860_ANA_INT),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD0),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DASYNC),
+	SPRD_PINCTRL_PIN(SC9860_LCM_RSTN),
+	SPRD_PINCTRL_PIN(SC9860_DSI_TE),
+	SPRD_PINCTRL_PIN(SC9860_PWMA),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT0),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT1),
+	SPRD_PINCTRL_PIN(SC9860_SDA1),
+	SPRD_PINCTRL_PIN(SC9860_SCL1),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK2),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA2),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST2),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK1),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA1),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST1),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK0),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA0),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST0),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CMD),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D0),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D1),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CLK),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D2),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D3),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D3),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D2),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CMD),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D0),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D1),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CLK),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CMD),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D6),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D7),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CLK),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D5),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D4),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_DS),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D3),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_RST),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D1),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D2),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D0),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DI),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DO),
+	SPRD_PINCTRL_PIN(SC9860_IIS0CLK),
+	SPRD_PINCTRL_PIN(SC9860_IIS0LRCK),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CLK),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CMD),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D0),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D1),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D2),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D3),
+	SPRD_PINCTRL_PIN(SC9860_CLK_AUX0),
+	SPRD_PINCTRL_PIN(SC9860_WIFI_COEXIST),
+	SPRD_PINCTRL_PIN(SC9860_BEIDOU_COEXIST),
+	SPRD_PINCTRL_PIN(SC9860_U3TXD),
+	SPRD_PINCTRL_PIN(SC9860_U3RXD),
+	SPRD_PINCTRL_PIN(SC9860_U3CTS),
+	SPRD_PINCTRL_PIN(SC9860_U3RTS),
+	SPRD_PINCTRL_PIN(SC9860_U0TXD),
+	SPRD_PINCTRL_PIN(SC9860_U0RXD),
+	SPRD_PINCTRL_PIN(SC9860_U0CTS),
+	SPRD_PINCTRL_PIN(SC9860_U0RTS),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DI),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DO),
+	SPRD_PINCTRL_PIN(SC9860_IIS1CLK),
+	SPRD_PINCTRL_PIN(SC9860_IIS1LRCK),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CSN),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DO),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DI),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CLK),
+	SPRD_PINCTRL_PIN(SC9860_U2TXD),
+	SPRD_PINCTRL_PIN(SC9860_U2RXD),
+	SPRD_PINCTRL_PIN(SC9860_U4TXD),
+	SPRD_PINCTRL_PIN(SC9860_U4RXD),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK1),
+	SPRD_PINCTRL_PIN(SC9860_CMRST1),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK0),
+	SPRD_PINCTRL_PIN(SC9860_CMRST0),
+	SPRD_PINCTRL_PIN(SC9860_CMPD0),
+	SPRD_PINCTRL_PIN(SC9860_CMPD1),
+	SPRD_PINCTRL_PIN(SC9860_SCL0),
+	SPRD_PINCTRL_PIN(SC9860_SDA0),
+	SPRD_PINCTRL_PIN(SC9860_SDA6),
+	SPRD_PINCTRL_PIN(SC9860_SCL6),
+	SPRD_PINCTRL_PIN(SC9860_U1TXD),
+	SPRD_PINCTRL_PIN(SC9860_U1RXD),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT0),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT1),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT2),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN0),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN1),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN2),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DI),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DO),
+	SPRD_PINCTRL_PIN(SC9860_IIS3CLK),
+	SPRD_PINCTRL_PIN(SC9860_IIS3LRCK),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL0),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL1),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL10),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL11),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL12),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL13),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL14),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL15),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL16),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL17),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL18),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL19),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL2),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT5),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT6),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT7),
+	SPRD_PINCTRL_PIN(SC9860_GPIO30),
+	SPRD_PINCTRL_PIN(SC9860_GPIO31),
+	SPRD_PINCTRL_PIN(SC9860_GPIO32),
+	SPRD_PINCTRL_PIN(SC9860_GPIO33),
+	SPRD_PINCTRL_PIN(SC9860_GPIO34),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL3),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL4),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL5),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL6),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL7),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL8),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL9),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SCK0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO38),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SDA0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO39),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SCK0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO181),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SDA0),
+	SPRD_PINCTRL_PIN(SC9860_GPIO182),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_ADC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_DAC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK0),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA0),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN0),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_ADC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_DAC_ON),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK1),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA1),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN1),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL38),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL39),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL20_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL21_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL30_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL31_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL32_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL33_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL34_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL35_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL36_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL37_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL22_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL23_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL24_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL25_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL26_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL27_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL28_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL29_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_MTCK_ARM_MISC),
+	SPRD_PINCTRL_PIN(SC9860_MTMS_ARM_MISC),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_PTEST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADD0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_ADSYNC_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_SCLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CHIP_SLEEP_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CLK_32K_MISC),
+	SPRD_PINCTRL_PIN(SC9860_DCDC_ARM_EN_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXT_RST_B_MISC),
+	SPRD_PINCTRL_PIN(SC9860_ADI_D_MISC),
+	SPRD_PINCTRL_PIN(SC9860_ADI_SCLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_XTL_EN1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_ANA_INT_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DAD0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_AUD_DASYNC_MISC),
+	SPRD_PINCTRL_PIN(SC9860_LCM_RSTN_MISC),
+	SPRD_PINCTRL_PIN(SC9860_DSI_TE_MISC),
+	SPRD_PINCTRL_PIN(SC9860_PWMA_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMCLK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SIMRST0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD2_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD0_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D7_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D5_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D4_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_DS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_RST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EMMC_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS0LRCK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_CMD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SD1_D3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CLK_AUX0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_WIFI_COEXIST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_BEIDOU_COEXIST_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3CTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U3RTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0CTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U0RTS_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS1LRCK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CSN_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SPI0_CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U2TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U2RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U4TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U4RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMRST1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMMCLK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMRST0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMPD0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_CMPD1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SDA6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_SCL6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U1TXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_U1RXD_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYOUT2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_KEYIN2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DI_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3DO_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3CLK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_IIS3LRCK_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL10_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL11_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL12_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL13_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL14_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL15_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL16_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL17_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL18_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL19_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL2_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT5_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_EXTINT7_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO30_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO31_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO32_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO33_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO34_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL3_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL4_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL5_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL6_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL7_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL8_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL9_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SCK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO38_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE0_SDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO39_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SCK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO181_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFFE1_SDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_GPIO182_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_ADC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS0_DAC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN0_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_ADC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RF_LVDS1_DAC_ON_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSCK1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSDA1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFSEN1_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL38_MISC),
+	SPRD_PINCTRL_PIN(SC9860_RFCTL39_MISC),
+};
+
+static int sprd_pinctrl_probe(struct platform_device *pdev)
+{
+	return sprd_pinctrl_core_probe(pdev, sprd_sc9860_pins_info,
+				       ARRAY_SIZE(sprd_sc9860_pins_info));
+}
+
+static const struct of_device_id sprd_pinctrl_of_match[] = {
+	{
+		.compatible = "sprd,sc9860-pinctrl",
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sprd_pinctrl_of_match);
+
+static struct platform_driver sprd_pinctrl_driver = {
+	.driver = {
+		.name = "sprd-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = sprd_pinctrl_of_match,
+	},
+	.probe = sprd_pinctrl_probe,
+	.remove = sprd_pinctrl_remove,
+	.shutdown = sprd_pinctrl_shutdown,
+};
+
+static int sprd_pinctrl_init(void)
+{
+	return platform_driver_register(&sprd_pinctrl_driver);
+}
+module_init(sprd_pinctrl_init);
+
+static void sprd_pinctrl_exit(void)
+{
+	platform_driver_unregister(&sprd_pinctrl_driver);
+}
+module_exit(sprd_pinctrl_exit);
+
+MODULE_DESCRIPTION("SPREADTRUM Pin Controller Driver");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.c b/drivers/pinctrl/sprd/pinctrl-sprd.c
new file mode 100644
index 0000000..7e7b9ac
--- /dev/null
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.c
@@ -0,0 +1,1113 @@
+/*
+ * Spreadtrum pin controller driver
+ * Copyright (C) 2017 Spreadtrum  - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/slab.h>
+
+#include "../core.h"
+#include "../pinmux.h"
+#include "../pinconf.h"
+#include "../pinctrl-utils.h"
+#include "pinctrl-sprd.h"
+
+#define PINCTRL_BIT_MASK(width)		(~(~0UL << (width)))
+#define PINCTRL_REG_OFFSET		0x20
+#define PINCTRL_REG_MISC_OFFSET		0x4020
+#define PINCTRL_REG_LEN			0x4
+
+#define PIN_FUNC_MASK			(BIT(4) | BIT(5))
+#define PIN_FUNC_SEL_1			~PIN_FUNC_MASK
+#define PIN_FUNC_SEL_2			BIT(4)
+#define PIN_FUNC_SEL_3			BIT(5)
+#define PIN_FUNC_SEL_4			PIN_FUNC_MASK
+
+#define AP_SLEEP_MODE			BIT(13)
+#define PUBCP_SLEEP_MODE		BIT(14)
+#define TGLDSP_SLEEP_MODE		BIT(15)
+#define AGDSP_SLEEP_MODE		BIT(16)
+#define SLEEP_MODE_MASK			GENMASK(3, 0)
+#define SLEEP_MODE_SHIFT		13
+
+#define SLEEP_INPUT			BIT(1)
+#define SLEEP_INPUT_MASK		0x1
+#define SLEEP_INPUT_SHIFT		1
+
+#define SLEEP_OUTPUT			BIT(0)
+#define SLEEP_OUTPUT_MASK		0x1
+#define SLEEP_OUTPUT_SHIFT		0
+
+#define DRIVE_STRENGTH_MASK		GENMASK(3, 0)
+#define DRIVE_STRENGTH_SHIFT		19
+
+#define SLEEP_PULL_DOWN			BIT(2)
+#define SLEEP_PULL_DOWN_MASK		0x1
+#define SLEEP_PULL_DOWN_SHIFT		2
+
+#define PULL_DOWN			BIT(6)
+#define PULL_DOWN_MASK			0x1
+#define PULL_DOWN_SHIFT			6
+
+#define SLEEP_PULL_UP			BIT(3)
+#define SLEEP_PULL_UP_MASK		0x1
+#define SLEEP_PULL_UP_SHIFT		3
+
+#define PULL_UP_20K			(BIT(12) | BIT(7))
+#define PULL_UP_4_7K			BIT(12)
+#define PULL_UP_MASK			0x21
+#define PULL_UP_SHIFT			7
+
+#define INPUT_SCHMITT			BIT(11)
+#define INPUT_SCHMITT_MASK		0x1
+#define INPUT_SCHMITT_SHIFT		11
+
+enum pin_sleep_mode {
+	AP_SLEEP = BIT(0),
+	PUBCP_SLEEP = BIT(1),
+	TGLDSP_SLEEP = BIT(2),
+	AGDSP_SLEEP = BIT(3),
+};
+
+enum pin_func_sel {
+	PIN_FUNC_1,
+	PIN_FUNC_2,
+	PIN_FUNC_3,
+	PIN_FUNC_4,
+	PIN_FUNC_MAX,
+};
+
+/**
+ * struct sprd_pin: represent one pin's description
+ * @name: pin name
+ * @number: pin number
+ * @type: pin type, can be GLOBAL_CTRL_PIN/COMMON_PIN/MISC_PIN
+ * @reg: pin register address
+ * @bit_offset: bit offset in pin register
+ * @bit_width: bit width in pin register
+ */
+struct sprd_pin {
+	const char *name;
+	unsigned int number;
+	enum pin_type type;
+	unsigned long reg;
+	unsigned long bit_offset;
+	unsigned long bit_width;
+};
+
+/**
+ * struct sprd_pin_group: represent one group's description
+ * @name: group name
+ * @npins: pin numbers of this group
+ * @pins: pointer to pins array
+ */
+struct sprd_pin_group {
+	const char *name;
+	unsigned int npins;
+	unsigned int *pins;
+};
+
+/**
+ * struct sprd_pinctrl_soc_info: represent the SoC's pins description
+ * @groups: pointer to groups of pins
+ * @ngroups: group numbers of the whole SoC
+ * @pins: pointer to pins description
+ * @npins: pin numbers of the whole SoC
+ * @grp_names: pointer to group names array
+ */
+struct sprd_pinctrl_soc_info {
+	struct sprd_pin_group *groups;
+	unsigned int ngroups;
+	struct sprd_pin *pins;
+	unsigned int npins;
+	const char **grp_names;
+};
+
+/**
+ * struct sprd_pinctrl: represent the pin controller device
+ * @dev: pointer to the device structure
+ * @pctl: pointer to the pinctrl handle
+ * @base: base address of the controller
+ * @info: pointer to SoC's pins description information
+ */
+struct sprd_pinctrl {
+	struct device *dev;
+	struct pinctrl_dev *pctl;
+	void __iomem *base;
+	struct sprd_pinctrl_soc_info *info;
+};
+
+enum sprd_pinconf_params {
+	SPRD_PIN_CONFIG_CONTROL = PIN_CONFIG_END + 1,
+	SPRD_PIN_CONFIG_SLEEP_MODE = PIN_CONFIG_END + 2,
+};
+
+static int sprd_pinctrl_get_id_by_name(struct sprd_pinctrl *sprd_pctl,
+				       const char *name)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	int i;
+
+	for (i = 0; i < info->npins; i++) {
+		if (!strcmp(info->pins[i].name, name))
+			return info->pins[i].number;
+	}
+
+	return -ENODEV;
+}
+
+static struct sprd_pin *
+sprd_pinctrl_get_pin_by_id(struct sprd_pinctrl *sprd_pctl, unsigned int id)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	struct sprd_pin *pin = NULL;
+	int i;
+
+	for (i = 0; i < info->npins; i++) {
+		if (info->pins[i].number == id) {
+			pin = &info->pins[i];
+			break;
+		}
+	}
+
+	return pin;
+}
+
+static const struct sprd_pin_group *
+sprd_pinctrl_find_group_by_name(struct sprd_pinctrl *sprd_pctl,
+				const char *name)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	const struct sprd_pin_group *grp = NULL;
+	int i;
+
+	for (i = 0; i < info->ngroups; i++) {
+		if (!strcmp(info->groups[i].name, name)) {
+			grp = &info->groups[i];
+			break;
+		}
+	}
+
+	return grp;
+}
+
+static int sprd_pctrl_group_count(struct pinctrl_dev *pctldev)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	return info->ngroups;
+}
+
+static const char *sprd_pctrl_group_name(struct pinctrl_dev *pctldev,
+					 unsigned int selector)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	return info->groups[selector].name;
+}
+
+static int sprd_pctrl_group_pins(struct pinctrl_dev *pctldev,
+				 unsigned int selector,
+				 const unsigned int **pins,
+				 unsigned int *npins)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	if (selector >= info->ngroups)
+		return -EINVAL;
+
+	*pins = info->groups[selector].pins;
+	*npins = info->groups[selector].npins;
+
+	return 0;
+}
+
+static int sprd_dt_node_to_map(struct pinctrl_dev *pctldev,
+			       struct device_node *np,
+			       struct pinctrl_map **map,
+			       unsigned int *num_maps)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	const struct sprd_pin_group *grp;
+	unsigned long *configs = NULL;
+	unsigned int num_configs = 0;
+	unsigned int reserved_maps = 0;
+	unsigned int reserve = 0;
+	const char *function;
+	enum pinctrl_map_type type;
+	int ret;
+
+	grp = sprd_pinctrl_find_group_by_name(pctl, np->name);
+	if (!grp) {
+		dev_err(pctl->dev, "unable to find group for node %s\n",
+			of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	ret = of_property_count_strings(np, "pins");
+	if (ret < 0)
+		return ret;
+
+	if (ret == 1)
+		type = PIN_MAP_TYPE_CONFIGS_PIN;
+	else
+		type = PIN_MAP_TYPE_CONFIGS_GROUP;
+
+	ret = of_property_read_string(np, "function", &function);
+	if (ret < 0) {
+		if (ret != -EINVAL)
+			dev_err(pctl->dev,
+				"%s: could not parse property function\n",
+				of_node_full_name(np));
+		function = NULL;
+	}
+
+	ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
+					      &num_configs);
+	if (ret < 0) {
+		dev_err(pctl->dev, "%s: could not parse node property\n",
+			of_node_full_name(np));
+		return ret;
+	}
+
+	*map = NULL;
+	*num_maps = 0;
+
+	if (function != NULL)
+		reserve++;
+	if (num_configs)
+		reserve++;
+
+	ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps,
+					num_maps, reserve);
+	if (ret < 0)
+		goto out;
+
+	if (function) {
+		ret = pinctrl_utils_add_map_mux(pctldev, map,
+						&reserved_maps, num_maps,
+						grp->name, function);
+		if (ret < 0)
+			goto out;
+	}
+
+	if (num_configs) {
+		const char *group_or_pin;
+		unsigned int pin_id;
+
+		if (type == PIN_MAP_TYPE_CONFIGS_PIN) {
+			pin_id = grp->pins[0];
+			group_or_pin = pin_get_name(pctldev, pin_id);
+		} else {
+			group_or_pin = grp->name;
+		}
+
+		ret = pinctrl_utils_add_map_configs(pctldev, map,
+						    &reserved_maps, num_maps,
+						    group_or_pin, configs,
+						    num_configs, type);
+	}
+
+out:
+	kfree(configs);
+	return ret;
+}
+
+static void sprd_pctrl_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
+				unsigned int offset)
+{
+	seq_printf(s, "%s", dev_name(pctldev->dev));
+}
+
+static const struct pinctrl_ops sprd_pctrl_ops = {
+	.get_groups_count = sprd_pctrl_group_count,
+	.get_group_name = sprd_pctrl_group_name,
+	.get_group_pins = sprd_pctrl_group_pins,
+	.pin_dbg_show = sprd_pctrl_dbg_show,
+	.dt_node_to_map = sprd_dt_node_to_map,
+	.dt_free_map = pinctrl_utils_free_map,
+};
+
+int sprd_pmx_get_function_count(struct pinctrl_dev *pctldev)
+{
+	return PIN_FUNC_MAX;
+}
+
+const char *sprd_pmx_get_function_name(struct pinctrl_dev *pctldev,
+				       unsigned int selector)
+{
+	switch (selector) {
+	case PIN_FUNC_1:
+		return "func1";
+	case PIN_FUNC_2:
+		return "func2";
+	case PIN_FUNC_3:
+		return "func3";
+	case PIN_FUNC_4:
+		return "func4";
+	default:
+		return "null";
+	}
+}
+
+int sprd_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+				 unsigned int selector,
+				 const char * const **groups,
+				 unsigned int * const num_groups)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+
+	*groups = info->grp_names;
+	*num_groups = info->ngroups;
+
+	return 0;
+}
+
+static int sprd_pmx_set_mux(struct pinctrl_dev *pctldev,
+			    unsigned int func_selector,
+			    unsigned int group_selector)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp = &info->groups[group_selector];
+	unsigned int i, grp_pins = grp->npins;
+	unsigned long reg;
+	unsigned int val = 0;
+
+	if (group_selector > info->ngroups)
+		return -EINVAL;
+
+	switch (func_selector) {
+	case PIN_FUNC_1:
+		val &= PIN_FUNC_SEL_1;
+		break;
+	case PIN_FUNC_2:
+		val |= PIN_FUNC_SEL_2;
+		break;
+	case PIN_FUNC_3:
+		val |= PIN_FUNC_SEL_3;
+		break;
+	case PIN_FUNC_4:
+		val |= PIN_FUNC_SEL_4;
+		break;
+	default:
+		break;
+	}
+
+	for (i = 0; i < grp_pins; i++) {
+		unsigned int pin_id = grp->pins[i];
+		struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+
+		if (!pin || pin->type != COMMON_PIN)
+			continue;
+
+		reg = readl((void __iomem *)pin->reg);
+		reg &= ~PIN_FUNC_MASK;
+		reg |= val;
+		writel(reg, (void __iomem *)pin->reg);
+	}
+
+	return 0;
+}
+
+static const struct pinmux_ops sprd_pmx_ops = {
+	.get_functions_count = sprd_pmx_get_function_count,
+	.get_function_name = sprd_pmx_get_function_name,
+	.get_function_groups = sprd_pmx_get_function_groups,
+	.set_mux = sprd_pmx_set_mux,
+};
+
+static int sprd_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin_id,
+			    unsigned long *config)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+	unsigned int param = pinconf_to_config_param(*config);
+	unsigned int reg, arg;
+
+	if (!pin)
+		return -EINVAL;
+
+	if (pin->type == GLOBAL_CTRL_PIN) {
+		reg = (readl((void __iomem *)pin->reg) >>
+			   pin->bit_offset) & PINCTRL_BIT_MASK(pin->bit_width);
+	} else {
+		reg = readl((void __iomem *)pin->reg);
+	}
+
+	if (pin->type == GLOBAL_CTRL_PIN &&
+	    param == SPRD_PIN_CONFIG_CONTROL) {
+		arg = reg;
+	} else if (pin->type == COMMON_PIN) {
+		switch (param) {
+		case SPRD_PIN_CONFIG_SLEEP_MODE:
+			arg = (reg >> SLEEP_MODE_SHIFT) & SLEEP_MODE_MASK;
+			break;
+		case PIN_CONFIG_INPUT_ENABLE:
+			arg = (reg >> SLEEP_INPUT_SHIFT) & SLEEP_INPUT_MASK;
+			break;
+		case PIN_CONFIG_OUTPUT:
+			arg = reg & SLEEP_OUTPUT_MASK;
+			break;
+		case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+			arg = 0;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	} else if (pin->type == MISC_PIN) {
+		switch (param) {
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			arg = (reg >> DRIVE_STRENGTH_SHIFT) &
+				DRIVE_STRENGTH_MASK;
+			break;
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			/* combine sleep pull down and pull down config */
+			arg = ((reg >> SLEEP_PULL_DOWN_SHIFT) &
+			       SLEEP_PULL_DOWN_MASK) << 16;
+			arg |= (reg >> PULL_DOWN_SHIFT) & PULL_DOWN_MASK;
+			break;
+		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+			arg = (reg >> INPUT_SCHMITT_SHIFT) & INPUT_SCHMITT_MASK;
+			break;
+		case PIN_CONFIG_BIAS_PULL_UP:
+			/* combine sleep pull up and pull up config */
+			arg = ((reg >> SLEEP_PULL_UP_SHIFT) &
+			       SLEEP_PULL_UP_MASK) << 16;
+			arg |= (reg >> PULL_UP_SHIFT) & PULL_UP_MASK;
+			break;
+		case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+			arg = 0;
+			break;
+		default:
+			return -ENOTSUPP;
+		}
+	} else {
+		return -ENOTSUPP;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+	return 0;
+}
+
+static unsigned int sprd_pinconf_drive(unsigned int mA)
+{
+	unsigned int val = 0;
+
+	switch (mA) {
+	case 2:
+		break;
+	case 4:
+		val |= BIT(19);
+		break;
+	case 6:
+		val |= BIT(20);
+		break;
+	case 8:
+		val |= BIT(19) | BIT(20);
+		break;
+	case 10:
+		val |= BIT(21);
+		break;
+	case 12:
+		val |= BIT(21) | BIT(19);
+		break;
+	case 14:
+		val |= BIT(21) | BIT(20);
+		break;
+	case 16:
+		val |= BIT(19) | BIT(20) | BIT(21);
+		break;
+	case 20:
+		val |= BIT(22);
+		break;
+	case 21:
+		val |= BIT(22) | BIT(19);
+		break;
+	case 24:
+		val |= BIT(22) | BIT(20);
+		break;
+	case 25:
+		val |= BIT(22) | BIT(20) | BIT(19);
+		break;
+	case 27:
+		val |= BIT(22) | BIT(21);
+		break;
+	case 29:
+		val |= BIT(22) | BIT(21) | BIT(19);
+		break;
+	case 31:
+		val |= BIT(22) | BIT(21) | BIT(20);
+		break;
+	case 33:
+		val |= BIT(22) | BIT(21) | BIT(20) | BIT(19);
+		break;
+	default:
+		break;
+	}
+
+	return val;
+}
+
+static bool sprd_pinctrl_check_sleep_config(unsigned long *configs,
+					    unsigned int num_configs)
+{
+	unsigned int param;
+	int i;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		if (param == PIN_CONFIG_SLEEP_HARDWARE_STATE)
+			return true;
+	}
+
+	return false;
+}
+
+static int sprd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin_id,
+			    unsigned long *configs, unsigned int num_configs)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+	bool is_sleep_config;
+	unsigned long reg;
+	int i;
+
+	if (!pin)
+		return -EINVAL;
+
+	is_sleep_config = sprd_pinctrl_check_sleep_config(configs, num_configs);
+
+	for (i = 0; i < num_configs; i++) {
+		unsigned int param, arg, shift, mask, val;
+
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		val = 0;
+		shift = 0;
+		mask = 0;
+		if (pin->type == GLOBAL_CTRL_PIN &&
+		    param == SPRD_PIN_CONFIG_CONTROL) {
+			val = arg;
+		} else if (pin->type == COMMON_PIN) {
+			switch (param) {
+			case SPRD_PIN_CONFIG_SLEEP_MODE:
+				if (arg & AP_SLEEP)
+					val |= AP_SLEEP_MODE;
+				if (arg & PUBCP_SLEEP)
+					val |= PUBCP_SLEEP_MODE;
+				if (arg & TGLDSP_SLEEP)
+					val |= TGLDSP_SLEEP_MODE;
+				if (arg & AGDSP_SLEEP)
+					val |= AGDSP_SLEEP_MODE;
+
+				mask = SLEEP_MODE_MASK;
+				shift = SLEEP_MODE_SHIFT;
+				break;
+			case PIN_CONFIG_INPUT_ENABLE:
+				if (is_sleep_config == true) {
+					if (arg > 0)
+						val |= SLEEP_INPUT;
+					else
+						val &= ~SLEEP_INPUT;
+
+					mask = SLEEP_INPUT_MASK;
+					shift = SLEEP_INPUT_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_OUTPUT:
+				if (is_sleep_config == true) {
+					val |= SLEEP_OUTPUT;
+					mask = SLEEP_OUTPUT_MASK;
+					shift = SLEEP_OUTPUT_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+				continue;
+			default:
+				return -ENOTSUPP;
+			}
+		} else if (pin->type == MISC_PIN) {
+			switch (param) {
+			case PIN_CONFIG_DRIVE_STRENGTH:
+				if (arg < 2 || arg > 60)
+					return -EINVAL;
+
+				val = sprd_pinconf_drive(arg);
+				mask = DRIVE_STRENGTH_MASK;
+				shift = DRIVE_STRENGTH_SHIFT;
+				break;
+			case PIN_CONFIG_BIAS_PULL_DOWN:
+				if (is_sleep_config == true) {
+					val |= SLEEP_PULL_DOWN;
+					mask = SLEEP_PULL_DOWN_MASK;
+					shift = SLEEP_PULL_DOWN_SHIFT;
+				} else {
+					val |= PULL_DOWN;
+					mask = PULL_DOWN_MASK;
+					shift = PULL_DOWN_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+				if (arg > 0)
+					val |= INPUT_SCHMITT;
+				else
+					val &= ~INPUT_SCHMITT;
+
+				mask = INPUT_SCHMITT_MASK;
+				shift = INPUT_SCHMITT_SHIFT;
+				break;
+			case PIN_CONFIG_BIAS_PULL_UP:
+				if (is_sleep_config == true) {
+					val |= SLEEP_PULL_UP;
+					mask = SLEEP_PULL_UP_MASK;
+					shift = SLEEP_PULL_UP_SHIFT;
+				} else {
+					if (arg == 20000)
+						val |= PULL_UP_20K;
+					else if (arg == 4700)
+						val |= PULL_UP_4_7K;
+
+					mask = PULL_UP_MASK;
+					shift = PULL_UP_SHIFT;
+				}
+				break;
+			case PIN_CONFIG_SLEEP_HARDWARE_STATE:
+				continue;
+			default:
+				return -ENOTSUPP;
+			}
+		} else {
+			return -ENOTSUPP;
+		}
+
+		if (pin->type == GLOBAL_CTRL_PIN) {
+			reg = readl((void __iomem *)pin->reg);
+			reg &= ~(PINCTRL_BIT_MASK(pin->bit_width)
+				<< pin->bit_offset);
+			reg |= (val & PINCTRL_BIT_MASK(pin->bit_width))
+				<< pin->bit_offset;
+			writel(reg, (void __iomem *)pin->reg);
+		} else {
+			reg = readl((void __iomem *)pin->reg);
+			reg &= ~(mask << shift);
+			reg |= val;
+			writel(reg, (void __iomem *)pin->reg);
+		}
+	}
+
+	return 0;
+}
+
+static int sprd_pinconf_group_get(struct pinctrl_dev *pctldev,
+				  unsigned int selector, unsigned long *config)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp;
+	unsigned int pin_id;
+
+	if (selector > info->ngroups)
+		return -EINVAL;
+
+	grp = &info->groups[selector];
+	pin_id = grp->pins[0];
+
+	return sprd_pinconf_get(pctldev, pin_id, config);
+}
+
+static int sprd_pinconf_group_set(struct pinctrl_dev *pctldev,
+				  unsigned int selector,
+				  unsigned long *configs,
+				  unsigned int num_configs)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp;
+	int ret, i;
+
+	if (selector > info->ngroups)
+		return -EINVAL;
+
+	grp = &info->groups[selector];
+
+	for (i = 0; i < grp->npins; i++) {
+		unsigned int pin_id = grp->pins[i];
+
+		ret = sprd_pinconf_set(pctldev, pin_id, configs, num_configs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int sprd_pinconf_get_config(struct pinctrl_dev *pctldev,
+				   unsigned int pin_id,
+				   unsigned long *config)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pin *pin = sprd_pinctrl_get_pin_by_id(pctl, pin_id);
+
+	if (!pin)
+		return -EINVAL;
+
+	if (pin->type == GLOBAL_CTRL_PIN) {
+		*config = (readl((void __iomem *)pin->reg) >>
+			   pin->bit_offset) & PINCTRL_BIT_MASK(pin->bit_width);
+	} else {
+		*config = readl((void __iomem *)pin->reg);
+	}
+
+	return 0;
+}
+
+static void sprd_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				  struct seq_file *s, unsigned int pin_id)
+{
+	unsigned long config;
+	int ret;
+
+	ret = sprd_pinconf_get_config(pctldev, pin_id, &config);
+	if (ret)
+		return;
+
+	seq_printf(s, "0x%lx", config);
+}
+
+static void sprd_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
+					struct seq_file *s,
+					unsigned int selector)
+{
+	struct sprd_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
+	struct sprd_pinctrl_soc_info *info = pctl->info;
+	struct sprd_pin_group *grp;
+	unsigned long config;
+	const char *name;
+	int i, ret;
+
+	if (selector > info->ngroups)
+		return;
+
+	grp = &info->groups[selector];
+
+	seq_printf(s, "\n");
+	for (i = 0; i < grp->npins; i++, config++) {
+		unsigned int pin_id = grp->pins[i];
+
+		name = pin_get_name(pctldev, pin_id);
+		ret = sprd_pinconf_get_config(pctldev, pin_id, &config);
+		if (ret)
+			return;
+
+		seq_printf(s, "%s: 0x%lx ", name, config);
+	}
+}
+
+static const struct pinconf_ops sprd_pinconf_ops = {
+	.is_generic = true,
+	.pin_config_get = sprd_pinconf_get,
+	.pin_config_set = sprd_pinconf_set,
+	.pin_config_group_get = sprd_pinconf_group_get,
+	.pin_config_group_set = sprd_pinconf_group_set,
+	.pin_config_dbg_show = sprd_pinconf_dbg_show,
+	.pin_config_group_dbg_show = sprd_pinconf_group_dbg_show,
+};
+
+static const struct pinconf_generic_params sprd_dt_params[] = {
+	{"sprd,control", SPRD_PIN_CONFIG_CONTROL, 0},
+	{"sprd,sleep-mode", SPRD_PIN_CONFIG_SLEEP_MODE, 0},
+};
+
+#ifdef CONFIG_DEBUG_FS
+static const struct pin_config_item sprd_conf_items[] = {
+	PCONFDUMP(SPRD_PIN_CONFIG_CONTROL, "global control", NULL, true),
+	PCONFDUMP(SPRD_PIN_CONFIG_SLEEP_MODE, "sleep mode", NULL, true),
+};
+#endif
+
+static struct pinctrl_desc sprd_pinctrl_desc = {
+	.pctlops = &sprd_pctrl_ops,
+	.pmxops = &sprd_pmx_ops,
+	.confops = &sprd_pinconf_ops,
+	.num_custom_params = ARRAY_SIZE(sprd_dt_params),
+	.custom_params = sprd_dt_params,
+#ifdef CONFIG_DEBUG_FS
+	.custom_conf_items = sprd_conf_items,
+#endif
+	.owner = THIS_MODULE,
+};
+
+static int sprd_pinctrl_parse_groups(struct device_node *np,
+				     struct sprd_pinctrl *sprd_pctl,
+				     struct sprd_pin_group *grp)
+{
+	struct property *prop;
+	const char *pin_name;
+	int ret, i = 0;
+
+	ret = of_property_count_strings(np, "pins");
+	if (ret < 0)
+		return ret;
+
+	grp->name = np->name;
+	grp->npins = ret;
+	grp->pins = devm_kzalloc(sprd_pctl->dev, grp->npins *
+				 sizeof(unsigned int), GFP_KERNEL);
+	if (!grp->pins)
+		return -ENOMEM;
+
+	of_property_for_each_string(np, "pins", prop, pin_name) {
+		ret = sprd_pinctrl_get_id_by_name(sprd_pctl, pin_name);
+		if (ret >= 0)
+			grp->pins[i++] = ret;
+	}
+
+	for (i = 0; i < grp->npins; i++) {
+		dev_dbg(sprd_pctl->dev,
+			"Group[%s] contains [%d] pins: id = %d\n",
+			grp->name, grp->npins, grp->pins[i]);
+	}
+
+	return 0;
+}
+
+static unsigned int sprd_pinctrl_get_groups(struct device_node *np)
+{
+	struct device_node *child;
+	unsigned int group_cnt, cnt;
+
+	group_cnt = of_get_child_count(np);
+
+	for_each_child_of_node(np, child) {
+		cnt = of_get_child_count(child);
+		if (cnt > 0)
+			group_cnt += cnt;
+	}
+
+	return group_cnt;
+}
+
+static int sprd_pinctrl_parse_dt(struct sprd_pinctrl *sprd_pctl)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	struct device_node *np = sprd_pctl->dev->of_node;
+	struct device_node *child, *sub_child;
+	struct sprd_pin_group *grp;
+	const char **temp;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	info->ngroups = sprd_pinctrl_get_groups(np);
+	if (!info->ngroups)
+		return 0;
+
+	info->groups = devm_kzalloc(sprd_pctl->dev, info->ngroups *
+				    sizeof(struct sprd_pin_group),
+				    GFP_KERNEL);
+	if (!info->groups)
+		return -ENOMEM;
+
+	info->grp_names = devm_kzalloc(sprd_pctl->dev,
+				       info->ngroups * sizeof(char *),
+				       GFP_KERNEL);
+	if (!info->grp_names)
+		return -ENOMEM;
+
+	temp = info->grp_names;
+	grp = info->groups;
+
+	for_each_child_of_node(np, child) {
+		ret = sprd_pinctrl_parse_groups(child, sprd_pctl, grp);
+		if (ret)
+			return ret;
+
+		*temp++ = grp->name;
+		grp++;
+
+		if (of_get_child_count(child) > 0) {
+			for_each_child_of_node(child, sub_child) {
+				ret = sprd_pinctrl_parse_groups(sub_child,
+								sprd_pctl, grp);
+				if (ret)
+					return ret;
+
+				*temp++ = grp->name;
+				grp++;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int sprd_pinctrl_add_pins(struct sprd_pinctrl *sprd_pctl,
+				 struct sprd_pins_info *sprd_soc_pin_info,
+				 int pins_cnt)
+{
+	struct sprd_pinctrl_soc_info *info = sprd_pctl->info;
+	unsigned int ctrl_pin = 0, com_pin = 0;
+	struct sprd_pin *pin;
+	int i;
+
+	info->npins = pins_cnt;
+	info->pins = devm_kzalloc(sprd_pctl->dev,
+				  info->npins * sizeof(struct sprd_pin),
+				  GFP_KERNEL);
+	if (!info->pins)
+		return -ENOMEM;
+
+	for (i = 0, pin = info->pins; i < info->npins; i++, pin++) {
+		unsigned int reg;
+
+		pin->name = sprd_soc_pin_info[i].name;
+		pin->type = sprd_soc_pin_info[i].type;
+		pin->number = sprd_soc_pin_info[i].num;
+		reg = sprd_soc_pin_info[i].reg;
+		if (pin->type == GLOBAL_CTRL_PIN) {
+			pin->reg = (unsigned long)sprd_pctl->base +
+				PINCTRL_REG_LEN * reg;
+			pin->bit_offset = sprd_soc_pin_info[i].bit_offset;
+			pin->bit_width = sprd_soc_pin_info[i].bit_width;
+			ctrl_pin++;
+		} else if (pin->type == COMMON_PIN) {
+			pin->reg = (unsigned long)sprd_pctl->base +
+				PINCTRL_REG_OFFSET + PINCTRL_REG_LEN *
+				(i - ctrl_pin);
+			com_pin++;
+		} else if (pin->type == MISC_PIN) {
+			pin->reg = (unsigned long)sprd_pctl->base +
+				PINCTRL_REG_MISC_OFFSET + PINCTRL_REG_LEN *
+				(i - ctrl_pin - com_pin);
+		}
+	}
+
+	for (i = 0, pin = info->pins; i < info->npins; pin++, i++) {
+		dev_dbg(sprd_pctl->dev, "pin name[%s-%d], type = %d, "
+			"bit offset = %ld, bit width = %ld, reg = 0x%lx\n",
+			pin->name, pin->number, pin->type,
+			pin->bit_offset, pin->bit_width, pin->reg);
+	}
+
+	return 0;
+}
+
+int sprd_pinctrl_core_probe(struct platform_device *pdev,
+			    struct sprd_pins_info *sprd_soc_pin_info,
+			    int pins_cnt)
+{
+	struct sprd_pinctrl *sprd_pctl;
+	struct sprd_pinctrl_soc_info *pinctrl_info;
+	struct pinctrl_pin_desc *pin_desc;
+	struct resource *res;
+	int ret, i;
+
+	sprd_pctl = devm_kzalloc(&pdev->dev, sizeof(struct sprd_pinctrl),
+				 GFP_KERNEL);
+	if (!sprd_pctl)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sprd_pctl->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sprd_pctl->base))
+		return PTR_ERR(sprd_pctl->base);
+
+	pinctrl_info = devm_kzalloc(&pdev->dev,
+				    sizeof(struct sprd_pinctrl_soc_info),
+				    GFP_KERNEL);
+	if (!pinctrl_info)
+		return -ENOMEM;
+
+	sprd_pctl->info = pinctrl_info;
+	sprd_pctl->dev = &pdev->dev;
+	platform_set_drvdata(pdev, sprd_pctl);
+
+	ret = sprd_pinctrl_add_pins(sprd_pctl, sprd_soc_pin_info, pins_cnt);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to add pins information\n");
+		return ret;
+	}
+
+	pin_desc = devm_kzalloc(&pdev->dev, pinctrl_info->npins *
+				sizeof(struct pinctrl_pin_desc),
+				GFP_KERNEL);
+	if (!pin_desc)
+		return -ENOMEM;
+
+	for (i = 0; i < pinctrl_info->npins; i++) {
+		pin_desc[i].number = pinctrl_info->pins[i].number;
+		pin_desc[i].name = pinctrl_info->pins[i].name;
+		pin_desc[i].drv_data = pinctrl_info;
+	}
+
+	sprd_pinctrl_desc.pins = pin_desc;
+	sprd_pinctrl_desc.name = dev_name(&pdev->dev);
+	sprd_pinctrl_desc.npins = pinctrl_info->npins;
+
+	sprd_pctl->pctl = pinctrl_register(&sprd_pinctrl_desc,
+					   &pdev->dev, (void *)sprd_pctl);
+	if (IS_ERR(sprd_pctl->pctl)) {
+		dev_err(&pdev->dev, "could not register pinctrl driver\n");
+		return PTR_ERR(sprd_pctl->pctl);
+	}
+
+	ret = sprd_pinctrl_parse_dt(sprd_pctl);
+	if (ret) {
+		dev_err(&pdev->dev, "fail to parse dt properties\n");
+		pinctrl_unregister(sprd_pctl->pctl);
+		return ret;
+	}
+
+	return 0;
+}
+
+int sprd_pinctrl_remove(struct platform_device *pdev)
+{
+	struct sprd_pinctrl *sprd_pctl = platform_get_drvdata(pdev);
+
+	pinctrl_unregister(sprd_pctl->pctl);
+	return 0;
+}
+
+void sprd_pinctrl_shutdown(struct platform_device *pdev)
+{
+	struct pinctrl *pinctl = devm_pinctrl_get(&pdev->dev);
+	struct pinctrl_state *state;
+
+	state = pinctrl_lookup_state(pinctl, "shutdown");
+	if (!IS_ERR(state))
+		pinctrl_select_state(pinctl, state);
+}
+
+MODULE_DESCRIPTION("SPREADTRUM Pin Controller Driver");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/sprd/pinctrl-sprd.h b/drivers/pinctrl/sprd/pinctrl-sprd.h
new file mode 100644
index 0000000..31a43fe
--- /dev/null
+++ b/drivers/pinctrl/sprd/pinctrl-sprd.h
@@ -0,0 +1,67 @@
+/*
+ * Driver header file for pin controller driver
+ * Copyright (C) 2017 Spreadtrum  - http://www.spreadtrum.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __PINCTRL_SPRD_H__
+#define __PINCTRL_SPRD_H__
+
+struct platform_device;
+
+#define NUM_OFFSET	(20)
+#define TYPE_OFFSET	(16)
+#define BIT_OFFSET	(8)
+#define WIDTH_OFFSET	(4)
+
+#define SPRD_PIN_INFO(num, type, offset, width, reg)	\
+		(((num) & 0xFFF) << NUM_OFFSET |	\
+		 ((type) & 0xF) << TYPE_OFFSET |	\
+		 ((offset) & 0xFF) << BIT_OFFSET |	\
+		 ((width) & 0xF) << WIDTH_OFFSET |	\
+		 ((reg) & 0xF))
+
+#define SPRD_PINCTRL_PIN(pin)	SPRD_PINCTRL_PIN_DATA(pin, #pin)
+
+#define SPRD_PINCTRL_PIN_DATA(a, b)				\
+	{							\
+		.name = b,					\
+		.num = (((a) >> NUM_OFFSET) & 0xfff),		\
+		.type = (((a) >> TYPE_OFFSET) & 0xf),		\
+		.bit_offset = (((a) >> BIT_OFFSET) & 0xff),	\
+		.bit_width = ((a) >> WIDTH_OFFSET & 0xf),	\
+		.reg = ((a) & 0xf)				\
+	}
+
+enum pin_type {
+	GLOBAL_CTRL_PIN,
+	COMMON_PIN,
+	MISC_PIN,
+};
+
+struct sprd_pins_info {
+	const char *name;
+	unsigned int num;
+	enum pin_type type;
+
+	/* for global control pins configuration */
+	unsigned long bit_offset;
+	unsigned long bit_width;
+	unsigned int reg;
+};
+
+int sprd_pinctrl_core_probe(struct platform_device *pdev,
+			    struct sprd_pins_info *sprd_soc_pin_info,
+			    int pins_cnt);
+int sprd_pinctrl_remove(struct platform_device *pdev);
+void sprd_pinctrl_shutdown(struct platform_device *pdev);
+
+#endif /* __PINCTRL_SPRD_H__ */
-- 
1.7.9.5

Re: [PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[kbuild test robot]

Hi Baolin,

[auto build test WARNING on v4.12]
[cannot apply to pinctrl/devel robh/for-next next-20170714]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/pinctrl-Add-sleep-related-state-to-indicate-sleep-related-configs/20170715-021507


coccinelle warnings: (new ones prefixed by >>)

>> drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c:950:3-8: No need to set .owner here. The core will do it.

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] pinctrl: sprd: fix platform_no_drv_owner.cocci warnings

[kbuild test robot]

drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c:950:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: c4e438f44054 ("pinctrl: sprd: Add Spreadtrum pin control driver")
CC: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 pinctrl-sprd-sc9860.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
@@ -947,7 +947,6 @@ MODULE_DEVICE_TABLE(of, sprd_pinctrl_of_
 static struct platform_driver sprd_pinctrl_driver = {
 	.driver = {
 		.name = "sprd-pinctrl",
-		.owner = THIS_MODULE,
 		.of_match_table = sprd_pinctrl_of_match,
 	},
 	.probe = sprd_pinctrl_probe,

Re: [PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[kbuild test robot]

Hi Baolin,

[auto build test WARNING on v4.12]
[cannot apply to pinctrl/devel robh/for-next next-20170714]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Baolin-Wang/pinctrl-Add-sleep-related-state-to-indicate-sleep-related-configs/20170715-021507


coccinelle warnings: (new ones prefixed by >>)

>> drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c:950:3-8: No need to set .owner here. The core will do it.

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[PATCH] pinctrl: sprd: fix platform_no_drv_owner.cocci warnings

[kbuild test robot]

drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c:950:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: c4e438f44054 ("pinctrl: sprd: Add Spreadtrum pin control driver")
CC: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 pinctrl-sprd-sc9860.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
+++ b/drivers/pinctrl/sprd/pinctrl-sprd-sc9860.c
@@ -947,7 +947,6 @@ MODULE_DEVICE_TABLE(of, sprd_pinctrl_of_
 static struct platform_driver sprd_pinctrl_driver = {
 	.driver = {
 		.name = "sprd-pinctrl",
-		.owner = THIS_MODULE,
 		.of_match_table = sprd_pinctrl_of_match,
 	},
 	.probe = sprd_pinctrl_probe,

Re: [PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Baolin Wang]

Hi LinusW and Rob,

On 14 July 2017 at 16:08, Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:
> In some scenarios, we should set some pins as input/output/pullup/pulldown
> when the specified system goes into deep sleep mode, then when the system
> goes into deep sleep mode, these pins will be set automatically by hardware.
>
> That means some pins are not controlled by any specific driver in the OS, but
> need to be controlled when entering sleep mode. Thus we introduce one sleep
> state config into pinconf-generic for users to configure.
>
> Signed-off-by: Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> ---
> Changes since v4:
>  - Add sleep-hardware-state config to indicate sleep related configs.
> ---

Do you have any comments about this patch set? Thanks.

>  .../bindings/pinctrl/pinctrl-bindings.txt          |    2 ++
>  drivers/pinctrl/pinconf-generic.c                  |    2 ++
>  include/linux/pinctrl/pinconf-generic.h            |    2 ++
>  3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> index bf3f7b0..2365a21 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> @@ -236,6 +236,8 @@ low-power-enable    - enable low power mode
>  low-power-disable      - disable low power mode
>  output-low             - set the pin to output mode with low level
>  output-high            - set the pin to output mode with high level
> +sleep-hardware-state   - indicate this is sleep related state which will be programmed
> +                         into the registers for the sleep state.
>  slew-rate              - set the slew rate
>
>  For example:
> diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
> index ce3335a..9a7f168 100644
> --- a/drivers/pinctrl/pinconf-generic.c
> +++ b/drivers/pinctrl/pinconf-generic.c
> @@ -46,6 +46,7 @@
>         PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
>         PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
>         PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
> +       PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
>         PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
>  };
>
> @@ -175,6 +176,7 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
>         { "output-high", PIN_CONFIG_OUTPUT, 1, },
>         { "output-low", PIN_CONFIG_OUTPUT, 0, },
>         { "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
> +       { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
>         { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
>  };
>
> diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
> index 7620eb1..a5d0fb4 100644
> --- a/include/linux/pinctrl/pinconf-generic.h
> +++ b/include/linux/pinctrl/pinconf-generic.h
> @@ -80,6 +80,7 @@
>   * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
>   *     supplies, the argument to this parameter (on a custom format) tells
>   *     the driver which alternative power source to use.
> + * @PIN_CONFIG_SLEEP_HARDWARE_STATE: indicate this is sleep related state.
>   * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
>   *     this parameter (on a custom format) tells the driver which alternative
>   *     slew rate to use.
> @@ -107,6 +108,7 @@ enum pin_config_param {
>         PIN_CONFIG_LOW_POWER_MODE,
>         PIN_CONFIG_OUTPUT,
>         PIN_CONFIG_POWER_SOURCE,
> +       PIN_CONFIG_SLEEP_HARDWARE_STATE,
>         PIN_CONFIG_SLEW_RATE,
>         PIN_CONFIG_END = 0x7F,
>         PIN_CONFIG_MAX = 0xFF,
> --
> 1.7.9.5
>



-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Baolin Wang]

Hi LinusW and Rob,

On 14 July 2017 at 16:08, Baolin Wang <baolin.wang@spreadtrum.com> wrote:
> In some scenarios, we should set some pins as input/output/pullup/pulldown
> when the specified system goes into deep sleep mode, then when the system
> goes into deep sleep mode, these pins will be set automatically by hardware.
>
> That means some pins are not controlled by any specific driver in the OS, but
> need to be controlled when entering sleep mode. Thus we introduce one sleep
> state config into pinconf-generic for users to configure.
>
> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
> ---
> Changes since v4:
>  - Add sleep-hardware-state config to indicate sleep related configs.
> ---

Do you have any comments about this patch set? Thanks.

>  .../bindings/pinctrl/pinctrl-bindings.txt          |    2 ++
>  drivers/pinctrl/pinconf-generic.c                  |    2 ++
>  include/linux/pinctrl/pinconf-generic.h            |    2 ++
>  3 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> index bf3f7b0..2365a21 100644
> --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> @@ -236,6 +236,8 @@ low-power-enable    - enable low power mode
>  low-power-disable      - disable low power mode
>  output-low             - set the pin to output mode with low level
>  output-high            - set the pin to output mode with high level
> +sleep-hardware-state   - indicate this is sleep related state which will be programmed
> +                         into the registers for the sleep state.
>  slew-rate              - set the slew rate
>
>  For example:
> diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
> index ce3335a..9a7f168 100644
> --- a/drivers/pinctrl/pinconf-generic.c
> +++ b/drivers/pinctrl/pinconf-generic.c
> @@ -46,6 +46,7 @@
>         PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode", true),
>         PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level", true),
>         PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector", true),
> +       PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state", NULL, false),
>         PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL, true),
>  };
>
> @@ -175,6 +176,7 @@ void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
>         { "output-high", PIN_CONFIG_OUTPUT, 1, },
>         { "output-low", PIN_CONFIG_OUTPUT, 0, },
>         { "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
> +       { "sleep-hardware-state", PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
>         { "slew-rate", PIN_CONFIG_SLEW_RATE, 0 },
>  };
>
> diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
> index 7620eb1..a5d0fb4 100644
> --- a/include/linux/pinctrl/pinconf-generic.h
> +++ b/include/linux/pinctrl/pinconf-generic.h
> @@ -80,6 +80,7 @@
>   * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power
>   *     supplies, the argument to this parameter (on a custom format) tells
>   *     the driver which alternative power source to use.
> + * @PIN_CONFIG_SLEEP_HARDWARE_STATE: indicate this is sleep related state.
>   * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to
>   *     this parameter (on a custom format) tells the driver which alternative
>   *     slew rate to use.
> @@ -107,6 +108,7 @@ enum pin_config_param {
>         PIN_CONFIG_LOW_POWER_MODE,
>         PIN_CONFIG_OUTPUT,
>         PIN_CONFIG_POWER_SOURCE,
> +       PIN_CONFIG_SLEEP_HARDWARE_STATE,
>         PIN_CONFIG_SLEW_RATE,
>         PIN_CONFIG_END = 0x7F,
>         PIN_CONFIG_MAX = 0xFF,
> --
> 1.7.9.5
>



-- 
Baolin.wang
Best Regards

Re: [RESEND PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Linus Walleij]

On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:

> In some scenarios, we should set some pins as input/output/pullup/pulldown
> when the specified system goes into deep sleep mode, then when the system
> goes into deep sleep mode, these pins will be set automatically by hardware.
>
> That means some pins are not controlled by any specific driver in the OS, but
> need to be controlled when entering sleep mode. Thus we introduce one sleep
> state config into pinconf-generic for users to configure.
>
> Signed-off-by: Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> ---
> Changes since v4:
>  - Add sleep-hardware-state config to indicate sleep related configs.

No reactions and I can certainly not think of anything better (I even
suggested this) so patch applied.

Sorry for taking so long to look at this, I've been choked :/

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Linus Walleij]

On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang@spreadtrum.com> wrote:

> In some scenarios, we should set some pins as input/output/pullup/pulldown
> when the specified system goes into deep sleep mode, then when the system
> goes into deep sleep mode, these pins will be set automatically by hardware.
>
> That means some pins are not controlled by any specific driver in the OS, but
> need to be controlled when entering sleep mode. Thus we introduce one sleep
> state config into pinconf-generic for users to configure.
>
> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
> ---
> Changes since v4:
>  - Add sleep-hardware-state config to indicate sleep related configs.

No reactions and I can certainly not think of anything better (I even
suggested this) so patch applied.

Sorry for taking so long to look at this, I've been choked :/

Yours,
Linus Walleij

Re: [RESEND PATCH v5 2/3] dt-bindings: pinctrl: Add Spreadtrum SC9860 pin controller

[Linus Walleij]

On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang@spreadtrum.com> wrote:

> This patch adds the binding documentation for Spreadtrum SC9860 pin
> controller device.
>
> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
> ---
> Changes since v4:
>  - Remove these sleep related configs and only introduce one sleep
>    state config to indicate this is sleep state.

Looks good to me and noone is saying anything, so patch applied.

Yours,
Linus Walleij

Re: [RESEND PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[Linus Walleij]

On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:

> This patch adds the pin control driver for Spreadtrum SC9860 platform.
>
> Signed-off-by: Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
> ---
> Changes since v4:
>  - Remove sleep configs.
>  - Use one standard sleep hardware state config to indicate sleep configs.

Patch applied.

AFAICT this is a fine driver and you did a good job.

Thanks for standing out to my slowness.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[Linus Walleij]

On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang@spreadtrum.com> wrote:

> This patch adds the pin control driver for Spreadtrum SC9860 platform.
>
> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
> ---
> Changes since v4:
>  - Remove sleep configs.
>  - Use one standard sleep hardware state config to indicate sleep configs.

Patch applied.

AFAICT this is a fine driver and you did a good job.

Thanks for standing out to my slowness.

Yours,
Linus Walleij

Re: [RESEND PATCH v5 1/3] pinctrl: Add sleep related state to indicate sleep related configs

[Baolin Wang]

Hi,

On 31 August 2017 at 15:16, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang@spreadtrum.com> wrote:
>
>> In some scenarios, we should set some pins as input/output/pullup/pulldown
>> when the specified system goes into deep sleep mode, then when the system
>> goes into deep sleep mode, these pins will be set automatically by hardware.
>>
>> That means some pins are not controlled by any specific driver in the OS, but
>> need to be controlled when entering sleep mode. Thus we introduce one sleep
>> state config into pinconf-generic for users to configure.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
>> ---
>> Changes since v4:
>>  - Add sleep-hardware-state config to indicate sleep related configs.
>
> No reactions and I can certainly not think of anything better (I even
> suggested this) so patch applied.
>
> Sorry for taking so long to look at this, I've been choked :/

I can understand you are so busy :), thanks for your help.

-- 
Baolin.wang
Best Regards

Re: [RESEND PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[Baolin Wang]

Hi Linusw,

On 31 August 2017 at 15:25, Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org> wrote:
>
>> This patch adds the pin control driver for Spreadtrum SC9860 platform.
>>
>> Signed-off-by: Baolin Wang <baolin.wang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
>> ---
>> Changes since v4:
>>  - Remove sleep configs.
>>  - Use one standard sleep hardware state config to indicate sleep configs.
>
> Patch applied.
>
> AFAICT this is a fine driver and you did a good job.
>
> Thanks for standing out to my slowness.

Thanks.

-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RESEND PATCH v5 3/3] pinctrl: sprd: Add Spreadtrum pin control driver

[Baolin Wang]

Hi Linusw,

On 31 August 2017 at 15:25, Linus Walleij <linus.walleij@linaro.org> wrote:
> On Thu, Aug 17, 2017 at 8:50 AM, Baolin Wang <baolin.wang@spreadtrum.com> wrote:
>
>> This patch adds the pin control driver for Spreadtrum SC9860 platform.
>>
>> Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
>> ---
>> Changes since v4:
>>  - Remove sleep configs.
>>  - Use one standard sleep hardware state config to indicate sleep configs.
>
> Patch applied.
>
> AFAICT this is a fine driver and you did a good job.
>
> Thanks for standing out to my slowness.

Thanks.

-- 
Baolin.wang
Best Regards