* [PATCH v2 01/13] mm/munlock: delete page_mlock() and all its works
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
@ 2022-02-15 2:20 ` Hugh Dickins
2022-02-15 2:21 ` [PATCH v2 02/13] mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE Hugh Dickins
` (12 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:20 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
We have recommended some applications to mlock their userspace, but that
turns out to be counter-productive: when many processes mlock the same
file, contention on rmap's i_mmap_rwsem can become intolerable at exit: it
is needed for write, to remove any vma mapping that file from rmap's tree;
but hogged for read by those with mlocks calling page_mlock() (formerly
known as try_to_munlock()) on *each* page mapped from the file (the
purpose being to find out whether another process has the page mlocked,
so therefore it should not be unmlocked yet).
Several optimizations have been made in the past: one is to skip
page_mlock() when mapcount tells that nothing else has this page
mapped; but that doesn't help at all when others do have it mapped.
This time around, I initially intended to add a preliminary search
of the rmap tree for overlapping VM_LOCKED ranges; but that gets
messy with locking order, when in doubt whether a page is actually
present; and risks adding even more contention on the i_mmap_rwsem.
A solution would be much easier, if only there were space in struct page
for an mlock_count... but actually, most of the time, there is space for
it - an mlocked page spends most of its life on an unevictable LRU, but
since 3.18 removed the scan_unevictable_pages sysctl, that "LRU" has
been redundant. Let's try to reuse its page->lru.
But leave that until a later patch: in this patch, clear the ground by
removing page_mlock(), and all the infrastructure that has gathered
around it - which mostly hinders understanding, and will make reviewing
new additions harder. Don't mind those old comments about THPs, they
date from before 4.5's refcounting rework: splitting is not a risk here.
Just keep a minimal version of munlock_vma_page(), as reminder of what it
should attend to (in particular, the odd way PGSTRANDED is counted out of
PGMUNLOCKED), and likewise a stub for munlock_vma_pages_range(). Move
unchanged __mlock_posix_error_return() out of the way, down to above its
caller: this series then makes no further change after mlock_fixup().
After this and each following commit, the kernel builds, boots and runs;
but with deficiencies which may show up in testing of mlock and munlock.
The system calls succeed or fail as before, and mlock remains effective
in preventing page reclaim; but meminfo's Unevictable and Mlocked amounts
may be shown too low after mlock, grow, then stay too high after munlock:
with previously mlocked pages remaining unevictable for too long, until
finally unmapped and freed and counts corrected. Normal service will be
resumed in "mm/munlock: mlock_pte_range() when mlocking or munlocking".
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: Restore munlock_vma_pages_range() VM_LOCKED_CLEAR_MASK, per Vlastimil.
Add paragraph to changelog on what does not work yet, per Vlastimil.
These v2 replacement patches based on 5.17-rc2 like v1.
include/linux/rmap.h | 6 -
mm/internal.h | 2 +-
mm/mlock.c | 375 +++----------------------------------------
mm/rmap.c | 80 ---------
4 files changed, 25 insertions(+), 438 deletions(-)
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index e704b1a4c06c..dc48aa8c2c94 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -237,12 +237,6 @@ unsigned long page_address_in_vma(struct page *, struct vm_area_struct *);
*/
int folio_mkclean(struct folio *);
-/*
- * called in munlock()/munmap() path to check for other vmas holding
- * the page mlocked.
- */
-void page_mlock(struct page *page);
-
void remove_migration_ptes(struct page *old, struct page *new, bool locked);
/*
diff --git a/mm/internal.h b/mm/internal.h
index d80300392a19..e48c486d5ddf 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -409,7 +409,7 @@ static inline void munlock_vma_pages_all(struct vm_area_struct *vma)
* must be called with vma's mmap_lock held for read or write, and page locked.
*/
extern void mlock_vma_page(struct page *page);
-extern unsigned int munlock_vma_page(struct page *page);
+extern void munlock_vma_page(struct page *page);
extern int mlock_future_check(struct mm_struct *mm, unsigned long flags,
unsigned long len);
diff --git a/mm/mlock.c b/mm/mlock.c
index 8f584eddd305..aec4ce7919da 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -46,12 +46,6 @@ EXPORT_SYMBOL(can_do_mlock);
* be placed on the LRU "unevictable" list, rather than the [in]active lists.
* The unevictable list is an LRU sibling list to the [in]active lists.
* PageUnevictable is set to indicate the unevictable state.
- *
- * When lazy mlocking via vmscan, it is important to ensure that the
- * vma's VM_LOCKED status is not concurrently being modified, otherwise we
- * may have mlocked a page that is being munlocked. So lazy mlock must take
- * the mmap_lock for read, and verify that the vma really is locked
- * (see mm/rmap.c).
*/
/*
@@ -106,299 +100,28 @@ void mlock_vma_page(struct page *page)
}
}
-/*
- * Finish munlock after successful page isolation
- *
- * Page must be locked. This is a wrapper for page_mlock()
- * and putback_lru_page() with munlock accounting.
- */
-static void __munlock_isolated_page(struct page *page)
-{
- /*
- * Optimization: if the page was mapped just once, that's our mapping
- * and we don't need to check all the other vmas.
- */
- if (page_mapcount(page) > 1)
- page_mlock(page);
-
- /* Did try_to_unlock() succeed or punt? */
- if (!PageMlocked(page))
- count_vm_events(UNEVICTABLE_PGMUNLOCKED, thp_nr_pages(page));
-
- putback_lru_page(page);
-}
-
-/*
- * Accounting for page isolation fail during munlock
- *
- * Performs accounting when page isolation fails in munlock. There is nothing
- * else to do because it means some other task has already removed the page
- * from the LRU. putback_lru_page() will take care of removing the page from
- * the unevictable list, if necessary. vmscan [page_referenced()] will move
- * the page back to the unevictable list if some other vma has it mlocked.
- */
-static void __munlock_isolation_failed(struct page *page)
-{
- int nr_pages = thp_nr_pages(page);
-
- if (PageUnevictable(page))
- __count_vm_events(UNEVICTABLE_PGSTRANDED, nr_pages);
- else
- __count_vm_events(UNEVICTABLE_PGMUNLOCKED, nr_pages);
-}
-
/**
* munlock_vma_page - munlock a vma page
* @page: page to be unlocked, either a normal page or THP page head
- *
- * returns the size of the page as a page mask (0 for normal page,
- * HPAGE_PMD_NR - 1 for THP head page)
- *
- * called from munlock()/munmap() path with page supposedly on the LRU.
- * When we munlock a page, because the vma where we found the page is being
- * munlock()ed or munmap()ed, we want to check whether other vmas hold the
- * page locked so that we can leave it on the unevictable lru list and not
- * bother vmscan with it. However, to walk the page's rmap list in
- * page_mlock() we must isolate the page from the LRU. If some other
- * task has removed the page from the LRU, we won't be able to do that.
- * So we clear the PageMlocked as we might not get another chance. If we
- * can't isolate the page, we leave it for putback_lru_page() and vmscan
- * [page_referenced()/try_to_unmap()] to deal with.
*/
-unsigned int munlock_vma_page(struct page *page)
+void munlock_vma_page(struct page *page)
{
- int nr_pages;
-
- /* For page_mlock() and to serialize with page migration */
+ /* Serialize with page migration */
BUG_ON(!PageLocked(page));
- VM_BUG_ON_PAGE(PageTail(page), page);
-
- if (!TestClearPageMlocked(page)) {
- /* Potentially, PTE-mapped THP: do not skip the rest PTEs */
- return 0;
- }
-
- nr_pages = thp_nr_pages(page);
- mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
-
- if (!isolate_lru_page(page))
- __munlock_isolated_page(page);
- else
- __munlock_isolation_failed(page);
-
- return nr_pages - 1;
-}
-
-/*
- * convert get_user_pages() return value to posix mlock() error
- */
-static int __mlock_posix_error_return(long retval)
-{
- if (retval == -EFAULT)
- retval = -ENOMEM;
- else if (retval == -ENOMEM)
- retval = -EAGAIN;
- return retval;
-}
-
-/*
- * Prepare page for fast batched LRU putback via putback_lru_evictable_pagevec()
- *
- * The fast path is available only for evictable pages with single mapping.
- * Then we can bypass the per-cpu pvec and get better performance.
- * when mapcount > 1 we need page_mlock() which can fail.
- * when !page_evictable(), we need the full redo logic of putback_lru_page to
- * avoid leaving evictable page in unevictable list.
- *
- * In case of success, @page is added to @pvec and @pgrescued is incremented
- * in case that the page was previously unevictable. @page is also unlocked.
- */
-static bool __putback_lru_fast_prepare(struct page *page, struct pagevec *pvec,
- int *pgrescued)
-{
- VM_BUG_ON_PAGE(PageLRU(page), page);
- VM_BUG_ON_PAGE(!PageLocked(page), page);
-
- if (page_mapcount(page) <= 1 && page_evictable(page)) {
- pagevec_add(pvec, page);
- if (TestClearPageUnevictable(page))
- (*pgrescued)++;
- unlock_page(page);
- return true;
- }
-
- return false;
-}
-/*
- * Putback multiple evictable pages to the LRU
- *
- * Batched putback of evictable pages that bypasses the per-cpu pvec. Some of
- * the pages might have meanwhile become unevictable but that is OK.
- */
-static void __putback_lru_fast(struct pagevec *pvec, int pgrescued)
-{
- count_vm_events(UNEVICTABLE_PGMUNLOCKED, pagevec_count(pvec));
- /*
- *__pagevec_lru_add() calls release_pages() so we don't call
- * put_page() explicitly
- */
- __pagevec_lru_add(pvec);
- count_vm_events(UNEVICTABLE_PGRESCUED, pgrescued);
-}
-
-/*
- * Munlock a batch of pages from the same zone
- *
- * The work is split to two main phases. First phase clears the Mlocked flag
- * and attempts to isolate the pages, all under a single zone lru lock.
- * The second phase finishes the munlock only for pages where isolation
- * succeeded.
- *
- * Note that the pagevec may be modified during the process.
- */
-static void __munlock_pagevec(struct pagevec *pvec, struct zone *zone)
-{
- int i;
- int nr = pagevec_count(pvec);
- int delta_munlocked = -nr;
- struct pagevec pvec_putback;
- struct lruvec *lruvec = NULL;
- int pgrescued = 0;
-
- pagevec_init(&pvec_putback);
-
- /* Phase 1: page isolation */
- for (i = 0; i < nr; i++) {
- struct page *page = pvec->pages[i];
- struct folio *folio = page_folio(page);
-
- if (TestClearPageMlocked(page)) {
- /*
- * We already have pin from follow_page_mask()
- * so we can spare the get_page() here.
- */
- if (TestClearPageLRU(page)) {
- lruvec = folio_lruvec_relock_irq(folio, lruvec);
- del_page_from_lru_list(page, lruvec);
- continue;
- } else
- __munlock_isolation_failed(page);
- } else {
- delta_munlocked++;
- }
+ VM_BUG_ON_PAGE(PageTail(page), page);
- /*
- * We won't be munlocking this page in the next phase
- * but we still need to release the follow_page_mask()
- * pin. We cannot do it under lru_lock however. If it's
- * the last pin, __page_cache_release() would deadlock.
- */
- pagevec_add(&pvec_putback, pvec->pages[i]);
- pvec->pages[i] = NULL;
- }
- if (lruvec) {
- __mod_zone_page_state(zone, NR_MLOCK, delta_munlocked);
- unlock_page_lruvec_irq(lruvec);
- } else if (delta_munlocked) {
- mod_zone_page_state(zone, NR_MLOCK, delta_munlocked);
- }
+ if (TestClearPageMlocked(page)) {
+ int nr_pages = thp_nr_pages(page);
- /* Now we can release pins of pages that we are not munlocking */
- pagevec_release(&pvec_putback);
-
- /* Phase 2: page munlock */
- for (i = 0; i < nr; i++) {
- struct page *page = pvec->pages[i];
-
- if (page) {
- lock_page(page);
- if (!__putback_lru_fast_prepare(page, &pvec_putback,
- &pgrescued)) {
- /*
- * Slow path. We don't want to lose the last
- * pin before unlock_page()
- */
- get_page(page); /* for putback_lru_page() */
- __munlock_isolated_page(page);
- unlock_page(page);
- put_page(page); /* from follow_page_mask() */
- }
+ mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
+ if (!isolate_lru_page(page)) {
+ putback_lru_page(page);
+ count_vm_events(UNEVICTABLE_PGMUNLOCKED, nr_pages);
+ } else if (PageUnevictable(page)) {
+ count_vm_events(UNEVICTABLE_PGSTRANDED, nr_pages);
}
}
-
- /*
- * Phase 3: page putback for pages that qualified for the fast path
- * This will also call put_page() to return pin from follow_page_mask()
- */
- if (pagevec_count(&pvec_putback))
- __putback_lru_fast(&pvec_putback, pgrescued);
-}
-
-/*
- * Fill up pagevec for __munlock_pagevec using pte walk
- *
- * The function expects that the struct page corresponding to @start address is
- * a non-TPH page already pinned and in the @pvec, and that it belongs to @zone.
- *
- * The rest of @pvec is filled by subsequent pages within the same pmd and same
- * zone, as long as the pte's are present and vm_normal_page() succeeds. These
- * pages also get pinned.
- *
- * Returns the address of the next page that should be scanned. This equals
- * @start + PAGE_SIZE when no page could be added by the pte walk.
- */
-static unsigned long __munlock_pagevec_fill(struct pagevec *pvec,
- struct vm_area_struct *vma, struct zone *zone,
- unsigned long start, unsigned long end)
-{
- pte_t *pte;
- spinlock_t *ptl;
-
- /*
- * Initialize pte walk starting at the already pinned page where we
- * are sure that there is a pte, as it was pinned under the same
- * mmap_lock write op.
- */
- pte = get_locked_pte(vma->vm_mm, start, &ptl);
- /* Make sure we do not cross the page table boundary */
- end = pgd_addr_end(start, end);
- end = p4d_addr_end(start, end);
- end = pud_addr_end(start, end);
- end = pmd_addr_end(start, end);
-
- /* The page next to the pinned page is the first we will try to get */
- start += PAGE_SIZE;
- while (start < end) {
- struct page *page = NULL;
- pte++;
- if (pte_present(*pte))
- page = vm_normal_page(vma, start, *pte);
- /*
- * Break if page could not be obtained or the page's node+zone does not
- * match
- */
- if (!page || page_zone(page) != zone)
- break;
-
- /*
- * Do not use pagevec for PTE-mapped THP,
- * munlock_vma_pages_range() will handle them.
- */
- if (PageTransCompound(page))
- break;
-
- get_page(page);
- /*
- * Increase the address that will be returned *before* the
- * eventual break due to pvec becoming full by adding the page
- */
- start += PAGE_SIZE;
- if (pagevec_add(pvec, page) == 0)
- break;
- }
- pte_unmap_unlock(pte, ptl);
- return start;
}
/*
@@ -413,75 +136,13 @@ static unsigned long __munlock_pagevec_fill(struct pagevec *pvec,
*
* Returns with VM_LOCKED cleared. Callers must be prepared to
* deal with this.
- *
- * We don't save and restore VM_LOCKED here because pages are
- * still on lru. In unmap path, pages might be scanned by reclaim
- * and re-mlocked by page_mlock/try_to_unmap before we unmap and
- * free them. This will result in freeing mlocked pages.
*/
void munlock_vma_pages_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
vma->vm_flags &= VM_LOCKED_CLEAR_MASK;
- while (start < end) {
- struct page *page;
- unsigned int page_mask = 0;
- unsigned long page_increm;
- struct pagevec pvec;
- struct zone *zone;
-
- pagevec_init(&pvec);
- /*
- * Although FOLL_DUMP is intended for get_dump_page(),
- * it just so happens that its special treatment of the
- * ZERO_PAGE (returning an error instead of doing get_page)
- * suits munlock very well (and if somehow an abnormal page
- * has sneaked into the range, we won't oops here: great).
- */
- page = follow_page(vma, start, FOLL_GET | FOLL_DUMP);
-
- if (page && !IS_ERR(page)) {
- if (PageTransTail(page)) {
- VM_BUG_ON_PAGE(PageMlocked(page), page);
- put_page(page); /* follow_page_mask() */
- } else if (PageTransHuge(page)) {
- lock_page(page);
- /*
- * Any THP page found by follow_page_mask() may
- * have gotten split before reaching
- * munlock_vma_page(), so we need to compute
- * the page_mask here instead.
- */
- page_mask = munlock_vma_page(page);
- unlock_page(page);
- put_page(page); /* follow_page_mask() */
- } else {
- /*
- * Non-huge pages are handled in batches via
- * pagevec. The pin from follow_page_mask()
- * prevents them from collapsing by THP.
- */
- pagevec_add(&pvec, page);
- zone = page_zone(page);
-
- /*
- * Try to fill the rest of pagevec using fast
- * pte walk. This will also update start to
- * the next page to process. Then munlock the
- * pagevec.
- */
- start = __munlock_pagevec_fill(&pvec, vma,
- zone, start, end);
- __munlock_pagevec(&pvec, zone);
- goto next;
- }
- }
- page_increm = 1 + page_mask;
- start += page_increm * PAGE_SIZE;
-next:
- cond_resched();
- }
+ /* Reimplementation to follow in later commit */
}
/*
@@ -645,6 +306,18 @@ static unsigned long count_mm_mlocked_page_nr(struct mm_struct *mm,
return count >> PAGE_SHIFT;
}
+/*
+ * convert get_user_pages() return value to posix mlock() error
+ */
+static int __mlock_posix_error_return(long retval)
+{
+ if (retval == -EFAULT)
+ retval = -ENOMEM;
+ else if (retval == -ENOMEM)
+ retval = -EAGAIN;
+ return retval;
+}
+
static __must_check int do_mlock(unsigned long start, size_t len, vm_flags_t flags)
{
unsigned long locked;
diff --git a/mm/rmap.c b/mm/rmap.c
index 6a1e8c7f6213..7ce7f1946cff 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1996,76 +1996,6 @@ void try_to_migrate(struct page *page, enum ttu_flags flags)
rmap_walk(page, &rwc);
}
-/*
- * Walks the vma's mapping a page and mlocks the page if any locked vma's are
- * found. Once one is found the page is locked and the scan can be terminated.
- */
-static bool page_mlock_one(struct page *page, struct vm_area_struct *vma,
- unsigned long address, void *unused)
-{
- struct page_vma_mapped_walk pvmw = {
- .page = page,
- .vma = vma,
- .address = address,
- };
-
- /* An un-locked vma doesn't have any pages to lock, continue the scan */
- if (!(vma->vm_flags & VM_LOCKED))
- return true;
-
- while (page_vma_mapped_walk(&pvmw)) {
- /*
- * Need to recheck under the ptl to serialise with
- * __munlock_pagevec_fill() after VM_LOCKED is cleared in
- * munlock_vma_pages_range().
- */
- if (vma->vm_flags & VM_LOCKED) {
- /*
- * PTE-mapped THP are never marked as mlocked; but
- * this function is never called on a DoubleMap THP,
- * nor on an Anon THP (which may still be PTE-mapped
- * after DoubleMap was cleared).
- */
- mlock_vma_page(page);
- /*
- * No need to scan further once the page is marked
- * as mlocked.
- */
- page_vma_mapped_walk_done(&pvmw);
- return false;
- }
- }
-
- return true;
-}
-
-/**
- * page_mlock - try to mlock a page
- * @page: the page to be mlocked
- *
- * Called from munlock code. Checks all of the VMAs mapping the page and mlocks
- * the page if any are found. The page will be returned with PG_mlocked cleared
- * if it is not mapped by any locked vmas.
- */
-void page_mlock(struct page *page)
-{
- struct rmap_walk_control rwc = {
- .rmap_one = page_mlock_one,
- .done = page_not_mapped,
- .anon_lock = page_lock_anon_vma_read,
-
- };
-
- VM_BUG_ON_PAGE(!PageLocked(page) || PageLRU(page), page);
- VM_BUG_ON_PAGE(PageCompound(page) && PageDoubleMap(page), page);
-
- /* Anon THP are only marked as mlocked when singly mapped */
- if (PageTransCompound(page) && PageAnon(page))
- return;
-
- rmap_walk(page, &rwc);
-}
-
#ifdef CONFIG_DEVICE_PRIVATE
struct make_exclusive_args {
struct mm_struct *mm;
@@ -2291,11 +2221,6 @@ static struct anon_vma *rmap_walk_anon_lock(struct page *page,
*
* Find all the mappings of a page using the mapping pointer and the vma chains
* contained in the anon_vma struct it points to.
- *
- * When called from page_mlock(), the mmap_lock of the mm containing the vma
- * where the page was found will be held for write. So, we won't recheck
- * vm_flags for that VMA. That should be OK, because that vma shouldn't be
- * LOCKED.
*/
static void rmap_walk_anon(struct page *page, struct rmap_walk_control *rwc,
bool locked)
@@ -2344,11 +2269,6 @@ static void rmap_walk_anon(struct page *page, struct rmap_walk_control *rwc,
*
* Find all the mappings of a page using the mapping pointer and the vma chains
* contained in the address_space struct it points to.
- *
- * When called from page_mlock(), the mmap_lock of the mm containing the vma
- * where the page was found will be held for write. So, we won't recheck
- * vm_flags for that VMA. That should be OK, because that vma shouldn't be
- * LOCKED.
*/
static void rmap_walk_file(struct page *page, struct rmap_walk_control *rwc,
bool locked)
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 02/13] mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
2022-02-15 2:20 ` [PATCH v2 01/13] mm/munlock: delete page_mlock() and all its works Hugh Dickins
@ 2022-02-15 2:21 ` Hugh Dickins
2022-02-15 2:23 ` [PATCH v2 03/13] mm/munlock: delete munlock_vma_pages_all(), allow oomreap Hugh Dickins
` (11 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:21 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
If counting page mlocks, we must not double-count: follow_page_pte() can
tell if a page has already been Mlocked or not, but cannot tell if a pte
has already been counted or not: that will have to be done when the pte
is mapped in (which lru_cache_add_inactive_or_unevictable() already tracks
for new anon pages, but there's no such tracking yet for others).
Delete all the FOLL_MLOCK code - faulting in the missing pages will do
all that is necessary, without special mlock_vma_page() calls from here.
But then FOLL_POPULATE turns out to serve no purpose - it was there so
that its absence would tell faultin_page() not to faultin page when
setting up VM_LOCKONFAULT areas; but if there's no special work needed
here for mlock, then there's no work at all here for VM_LOCKONFAULT.
Have I got that right? I've not looked into the history, but see that
FOLL_POPULATE goes back before VM_LOCKONFAULT: did it serve a different
purpose before? Ah, yes, it was used to skip the old stack guard page.
And is it intentional that COW is not broken on existing pages when
setting up a VM_LOCKONFAULT area? I can see that being argued either
way, and have no reason to disagree with current behaviour.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: same as v1.
include/linux/mm.h | 2 --
mm/gup.c | 43 ++++++++-----------------------------------
mm/huge_memory.c | 33 ---------------------------------
3 files changed, 8 insertions(+), 70 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 213cc569b192..74ee50c2033b 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2925,13 +2925,11 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address,
#define FOLL_FORCE 0x10 /* get_user_pages read/write w/o permission */
#define FOLL_NOWAIT 0x20 /* if a disk transfer is needed, start the IO
* and return without waiting upon it */
-#define FOLL_POPULATE 0x40 /* fault in pages (with FOLL_MLOCK) */
#define FOLL_NOFAULT 0x80 /* do not fault in pages */
#define FOLL_HWPOISON 0x100 /* check page is hwpoisoned */
#define FOLL_NUMA 0x200 /* force NUMA hinting page fault */
#define FOLL_MIGRATION 0x400 /* wait for page to replace migration entry */
#define FOLL_TRIED 0x800 /* a retry, previous pass started an IO */
-#define FOLL_MLOCK 0x1000 /* lock present pages */
#define FOLL_REMOTE 0x2000 /* we are working on non-current tsk/mm */
#define FOLL_COW 0x4000 /* internal GUP flag */
#define FOLL_ANON 0x8000 /* don't do file mappings */
diff --git a/mm/gup.c b/mm/gup.c
index f0af462ac1e2..2076902344d8 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -572,32 +572,6 @@ static struct page *follow_page_pte(struct vm_area_struct *vma,
*/
mark_page_accessed(page);
}
- if ((flags & FOLL_MLOCK) && (vma->vm_flags & VM_LOCKED)) {
- /* Do not mlock pte-mapped THP */
- if (PageTransCompound(page))
- goto out;
-
- /*
- * The preliminary mapping check is mainly to avoid the
- * pointless overhead of lock_page on the ZERO_PAGE
- * which might bounce very badly if there is contention.
- *
- * If the page is already locked, we don't need to
- * handle it now - vmscan will handle it later if and
- * when it attempts to reclaim the page.
- */
- if (page->mapping && trylock_page(page)) {
- lru_add_drain(); /* push cached pages to LRU */
- /*
- * Because we lock page here, and migration is
- * blocked by the pte's page reference, and we
- * know the page is still mapped, we don't even
- * need to check for file-cache page truncation.
- */
- mlock_vma_page(page);
- unlock_page(page);
- }
- }
out:
pte_unmap_unlock(ptep, ptl);
return page;
@@ -920,9 +894,6 @@ static int faultin_page(struct vm_area_struct *vma,
unsigned int fault_flags = 0;
vm_fault_t ret;
- /* mlock all present pages, but do not fault in new pages */
- if ((*flags & (FOLL_POPULATE | FOLL_MLOCK)) == FOLL_MLOCK)
- return -ENOENT;
if (*flags & FOLL_NOFAULT)
return -EFAULT;
if (*flags & FOLL_WRITE)
@@ -1173,8 +1144,6 @@ static long __get_user_pages(struct mm_struct *mm,
case -ENOMEM:
case -EHWPOISON:
goto out;
- case -ENOENT:
- goto next_page;
}
BUG();
} else if (PTR_ERR(page) == -EEXIST) {
@@ -1472,9 +1441,14 @@ long populate_vma_page_range(struct vm_area_struct *vma,
VM_BUG_ON_VMA(end > vma->vm_end, vma);
mmap_assert_locked(mm);
- gup_flags = FOLL_TOUCH | FOLL_POPULATE | FOLL_MLOCK;
+ /*
+ * Rightly or wrongly, the VM_LOCKONFAULT case has never used
+ * faultin_page() to break COW, so it has no work to do here.
+ */
if (vma->vm_flags & VM_LOCKONFAULT)
- gup_flags &= ~FOLL_POPULATE;
+ return nr_pages;
+
+ gup_flags = FOLL_TOUCH;
/*
* We want to touch writable mappings with a write fault in order
* to break COW, except for shared mappings because these don't COW
@@ -1541,10 +1515,9 @@ long faultin_vma_page_range(struct vm_area_struct *vma, unsigned long start,
* in the page table.
* FOLL_HWPOISON: Return -EHWPOISON instead of -EFAULT when we hit
* a poisoned page.
- * FOLL_POPULATE: Always populate memory with VM_LOCKONFAULT.
* !FOLL_FORCE: Require proper access permissions.
*/
- gup_flags = FOLL_TOUCH | FOLL_POPULATE | FOLL_MLOCK | FOLL_HWPOISON;
+ gup_flags = FOLL_TOUCH | FOLL_HWPOISON;
if (write)
gup_flags |= FOLL_WRITE;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 406a3c28c026..9a34b85ebcf8 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1380,39 +1380,6 @@ struct page *follow_trans_huge_pmd(struct vm_area_struct *vma,
if (flags & FOLL_TOUCH)
touch_pmd(vma, addr, pmd, flags);
- if ((flags & FOLL_MLOCK) && (vma->vm_flags & VM_LOCKED)) {
- /*
- * We don't mlock() pte-mapped THPs. This way we can avoid
- * leaking mlocked pages into non-VM_LOCKED VMAs.
- *
- * For anon THP:
- *
- * In most cases the pmd is the only mapping of the page as we
- * break COW for the mlock() -- see gup_flags |= FOLL_WRITE for
- * writable private mappings in populate_vma_page_range().
- *
- * The only scenario when we have the page shared here is if we
- * mlocking read-only mapping shared over fork(). We skip
- * mlocking such pages.
- *
- * For file THP:
- *
- * We can expect PageDoubleMap() to be stable under page lock:
- * for file pages we set it in page_add_file_rmap(), which
- * requires page to be locked.
- */
-
- if (PageAnon(page) && compound_mapcount(page) != 1)
- goto skip_mlock;
- if (PageDoubleMap(page) || !page->mapping)
- goto skip_mlock;
- if (!trylock_page(page))
- goto skip_mlock;
- if (page->mapping && !PageDoubleMap(page))
- mlock_vma_page(page);
- unlock_page(page);
- }
-skip_mlock:
page += (addr & ~HPAGE_PMD_MASK) >> PAGE_SHIFT;
VM_BUG_ON_PAGE(!PageCompound(page) && !is_zone_device_page(page), page);
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 03/13] mm/munlock: delete munlock_vma_pages_all(), allow oomreap
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
2022-02-15 2:20 ` [PATCH v2 01/13] mm/munlock: delete page_mlock() and all its works Hugh Dickins
2022-02-15 2:21 ` [PATCH v2 02/13] mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE Hugh Dickins
@ 2022-02-15 2:23 ` Hugh Dickins
2022-02-15 2:26 ` [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Hugh Dickins
` (10 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:23 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
munlock_vma_pages_range() will still be required, when munlocking but
not munmapping a set of pages; but when unmapping a pte, the mlock count
will be maintained in much the same way as it will be maintained when
mapping in the pte. Which removes the need for munlock_vma_pages_all()
on mlocked vmas when munmapping or exiting: eliminating the catastrophic
contention on i_mmap_rwsem, and the need for page lock on the pages.
There is still a need to update locked_vm accounting according to the
munmapped vmas when munmapping: do that in detach_vmas_to_be_unmapped().
exit_mmap() does not need locked_vm updates, so delete unlock_range().
And wasn't I the one who forbade the OOM reaper to attack mlocked vmas,
because of the uncertainty in blocking on all those page locks?
No fear of that now, so permit the OOM reaper on mlocked vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: same as v1.
mm/internal.h | 16 ++--------------
mm/madvise.c | 5 +++++
mm/mlock.c | 4 ++--
mm/mmap.c | 32 ++------------------------------
mm/oom_kill.c | 2 +-
5 files changed, 12 insertions(+), 47 deletions(-)
diff --git a/mm/internal.h b/mm/internal.h
index e48c486d5ddf..f235aa92e564 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -71,11 +71,6 @@ void free_pgtables(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
unsigned long floor, unsigned long ceiling);
void pmd_install(struct mm_struct *mm, pmd_t *pmd, pgtable_t *pte);
-static inline bool can_madv_lru_vma(struct vm_area_struct *vma)
-{
- return !(vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_PFNMAP));
-}
-
struct zap_details;
void unmap_page_range(struct mmu_gather *tlb,
struct vm_area_struct *vma,
@@ -398,12 +393,8 @@ extern long populate_vma_page_range(struct vm_area_struct *vma,
extern long faultin_vma_page_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end,
bool write, int *locked);
-extern void munlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
-static inline void munlock_vma_pages_all(struct vm_area_struct *vma)
-{
- munlock_vma_pages_range(vma, vma->vm_start, vma->vm_end);
-}
+extern int mlock_future_check(struct mm_struct *mm, unsigned long flags,
+ unsigned long len);
/*
* must be called with vma's mmap_lock held for read or write, and page locked.
@@ -411,9 +402,6 @@ static inline void munlock_vma_pages_all(struct vm_area_struct *vma)
extern void mlock_vma_page(struct page *page);
extern void munlock_vma_page(struct page *page);
-extern int mlock_future_check(struct mm_struct *mm, unsigned long flags,
- unsigned long len);
-
/*
* Clear the page's PageMlocked(). This can be useful in a situation where
* we want to unconditionally remove a page from the pagecache -- e.g.,
diff --git a/mm/madvise.c b/mm/madvise.c
index 5604064df464..ae35d72627ef 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -530,6 +530,11 @@ static void madvise_cold_page_range(struct mmu_gather *tlb,
tlb_end_vma(tlb, vma);
}
+static inline bool can_madv_lru_vma(struct vm_area_struct *vma)
+{
+ return !(vma->vm_flags & (VM_LOCKED|VM_HUGETLB|VM_PFNMAP));
+}
+
static long madvise_cold(struct vm_area_struct *vma,
struct vm_area_struct **prev,
unsigned long start_addr, unsigned long end_addr)
diff --git a/mm/mlock.c b/mm/mlock.c
index aec4ce7919da..5d7ced8303be 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -137,8 +137,8 @@ void munlock_vma_page(struct page *page)
* Returns with VM_LOCKED cleared. Callers must be prepared to
* deal with this.
*/
-void munlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+static void munlock_vma_pages_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
{
vma->vm_flags &= VM_LOCKED_CLEAR_MASK;
diff --git a/mm/mmap.c b/mm/mmap.c
index 1e8fdb0b51ed..64b5985b5295 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2674,6 +2674,8 @@ detach_vmas_to_be_unmapped(struct mm_struct *mm, struct vm_area_struct *vma,
vma->vm_prev = NULL;
do {
vma_rb_erase(vma, &mm->mm_rb);
+ if (vma->vm_flags & VM_LOCKED)
+ mm->locked_vm -= vma_pages(vma);
mm->map_count--;
tail_vma = vma;
vma = vma->vm_next;
@@ -2778,22 +2780,6 @@ int split_vma(struct mm_struct *mm, struct vm_area_struct *vma,
return __split_vma(mm, vma, addr, new_below);
}
-static inline void
-unlock_range(struct vm_area_struct *start, unsigned long limit)
-{
- struct mm_struct *mm = start->vm_mm;
- struct vm_area_struct *tmp = start;
-
- while (tmp && tmp->vm_start < limit) {
- if (tmp->vm_flags & VM_LOCKED) {
- mm->locked_vm -= vma_pages(tmp);
- munlock_vma_pages_all(tmp);
- }
-
- tmp = tmp->vm_next;
- }
-}
-
/* Munmap is split into 2 main parts -- this part which finds
* what needs doing, and the areas themselves, which do the
* work. This now handles partial unmappings.
@@ -2874,12 +2860,6 @@ int __do_munmap(struct mm_struct *mm, unsigned long start, size_t len,
return error;
}
- /*
- * unlock any mlock()ed ranges before detaching vmas
- */
- if (mm->locked_vm)
- unlock_range(vma, end);
-
/* Detach vmas from rbtree */
if (!detach_vmas_to_be_unmapped(mm, vma, prev, end))
downgrade = false;
@@ -3147,20 +3127,12 @@ void exit_mmap(struct mm_struct *mm)
* Nothing can be holding mm->mmap_lock here and the above call
* to mmu_notifier_release(mm) ensures mmu notifier callbacks in
* __oom_reap_task_mm() will not block.
- *
- * This needs to be done before calling unlock_range(),
- * which clears VM_LOCKED, otherwise the oom reaper cannot
- * reliably test it.
*/
(void)__oom_reap_task_mm(mm);
-
set_bit(MMF_OOM_SKIP, &mm->flags);
}
mmap_write_lock(mm);
- if (mm->locked_vm)
- unlock_range(mm->mmap, ULONG_MAX);
-
arch_exit_mmap(mm);
vma = mm->mmap;
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 832fb330376e..6b875acabd1e 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -526,7 +526,7 @@ bool __oom_reap_task_mm(struct mm_struct *mm)
set_bit(MMF_UNSTABLE, &mm->flags);
for (vma = mm->mmap ; vma; vma = vma->vm_next) {
- if (!can_madv_lru_vma(vma))
+ if (vma->vm_flags & (VM_HUGETLB|VM_PFNMAP))
continue;
/*
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (2 preceding siblings ...)
2022-02-15 2:23 ` [PATCH v2 03/13] mm/munlock: delete munlock_vma_pages_all(), allow oomreap Hugh Dickins
@ 2022-02-15 2:26 ` Hugh Dickins
2022-02-15 15:22 ` Matthew Wilcox
2022-02-15 2:28 ` [PATCH v2 05/13] mm/munlock: replace clear_page_mlock() by final clearance Hugh Dickins
` (9 subsequent siblings)
13 siblings, 1 reply; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:26 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, Yang Li, linux-kernel, linux-mm
Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
inline functions which check (vma->vm_flags & VM_LOCKED) before calling
mlock_page() and munlock_page() in mm/mlock.c.
Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
because we have understandable difficulty in accounting pte maps of THPs,
and if passed a PageHead page, mlock_page() and munlock_page() cannot
tell whether it's a pmd map to be counted or a pte map to be ignored.
Add vma arg to page_add_file_rmap() and page_remove_rmap(), like the
others, and use that to call mlock_vma_page() at the end of the page
adds, and munlock_vma_page() at the end of page_remove_rmap() (end or
beginning? unimportant, but end was easier for assertions in testing).
No page lock is required (although almost all adds happen to hold it):
delete the "Serialize with page migration" BUG_ON(!PageLocked(page))s.
Certainly page lock did serialize with page migration, but I'm having
difficulty explaining why that was ever important.
Mlock accounting on THPs has been hard to define, differed between anon
and file, involved PageDoubleMap in some places and not others, required
clear_page_mlock() at some points. Keep it simple now: just count the
pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
page_add_new_anon_rmap() callers unchanged: they have long been calling
lru_cache_add_inactive_or_unevictable(), which does its own VM_LOCKED
handling (it also checks for not VM_SPECIAL: I think that's overcautious,
and inconsistent with other checks, that mmap_region() already prevents
VM_LOCKED on VM_SPECIAL; but haven't quite convinced myself to change it).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: Fix kerneldoc on mlock_page() to use colon, per Yang Li.
mmotm will require minor fixup in mm/huge_memory.c like v1.
include/linux/rmap.h | 17 +++++++------
kernel/events/uprobes.c | 7 ++----
mm/huge_memory.c | 17 ++++++-------
mm/hugetlb.c | 4 +--
mm/internal.h | 36 ++++++++++++++++++++++----
mm/khugepaged.c | 4 +--
mm/ksm.c | 12 +--------
mm/memory.c | 45 +++++++++++----------------------
mm/migrate.c | 9 ++-----
mm/mlock.c | 21 ++++++----------
mm/rmap.c | 56 +++++++++++++++++++----------------------
mm/userfaultfd.c | 14 ++++++-----
12 files changed, 113 insertions(+), 129 deletions(-)
diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index dc48aa8c2c94..ac29b076082b 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -167,18 +167,19 @@ struct anon_vma *page_get_anon_vma(struct page *page);
*/
void page_move_anon_rmap(struct page *, struct vm_area_struct *);
void page_add_anon_rmap(struct page *, struct vm_area_struct *,
- unsigned long, bool);
+ unsigned long address, bool compound);
void do_page_add_anon_rmap(struct page *, struct vm_area_struct *,
- unsigned long, int);
+ unsigned long address, int flags);
void page_add_new_anon_rmap(struct page *, struct vm_area_struct *,
- unsigned long, bool);
-void page_add_file_rmap(struct page *, bool);
-void page_remove_rmap(struct page *, bool);
-
+ unsigned long address, bool compound);
+void page_add_file_rmap(struct page *, struct vm_area_struct *,
+ bool compound);
+void page_remove_rmap(struct page *, struct vm_area_struct *,
+ bool compound);
void hugepage_add_anon_rmap(struct page *, struct vm_area_struct *,
- unsigned long);
+ unsigned long address);
void hugepage_add_new_anon_rmap(struct page *, struct vm_area_struct *,
- unsigned long);
+ unsigned long address);
static inline void page_dup_rmap(struct page *page, bool compound)
{
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 6357c3580d07..eed2f7437d96 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -173,7 +173,7 @@ static int __replace_page(struct vm_area_struct *vma, unsigned long addr,
return err;
}
- /* For try_to_free_swap() and munlock_vma_page() below */
+ /* For try_to_free_swap() below */
lock_page(old_page);
mmu_notifier_invalidate_range_start(&range);
@@ -201,13 +201,10 @@ static int __replace_page(struct vm_area_struct *vma, unsigned long addr,
set_pte_at_notify(mm, addr, pvmw.pte,
mk_pte(new_page, vma->vm_page_prot));
- page_remove_rmap(old_page, false);
+ page_remove_rmap(old_page, vma, false);
if (!page_mapped(old_page))
try_to_free_swap(old_page);
page_vma_mapped_walk_done(&pvmw);
-
- if ((vma->vm_flags & VM_LOCKED) && !PageCompound(old_page))
- munlock_vma_page(old_page);
put_page(old_page);
err = 0;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 9a34b85ebcf8..d6477f48a27e 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1577,7 +1577,7 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
if (pmd_present(orig_pmd)) {
page = pmd_page(orig_pmd);
- page_remove_rmap(page, true);
+ page_remove_rmap(page, vma, true);
VM_BUG_ON_PAGE(page_mapcount(page) < 0, page);
VM_BUG_ON_PAGE(!PageHead(page), page);
} else if (thp_migration_supported()) {
@@ -1962,7 +1962,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
set_page_dirty(page);
if (!PageReferenced(page) && pmd_young(old_pmd))
SetPageReferenced(page);
- page_remove_rmap(page, true);
+ page_remove_rmap(page, vma, true);
put_page(page);
}
add_mm_counter(mm, mm_counter_file(page), -HPAGE_PMD_NR);
@@ -2096,6 +2096,9 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
}
}
unlock_page_memcg(page);
+
+ /* Above is effectively page_remove_rmap(page, vma, true) */
+ munlock_vma_page(page, vma, true);
}
smp_wmb(); /* make pte visible before pmd */
@@ -2103,7 +2106,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
if (freeze) {
for (i = 0; i < HPAGE_PMD_NR; i++) {
- page_remove_rmap(page + i, false);
+ page_remove_rmap(page + i, vma, false);
put_page(page + i);
}
}
@@ -2163,8 +2166,6 @@ void __split_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
do_unlock_page = true;
}
}
- if (PageMlocked(page))
- clear_page_mlock(page);
} else if (!(pmd_devmap(*pmd) || is_pmd_migration_entry(*pmd)))
goto out;
__split_huge_pmd_locked(vma, pmd, range.start, freeze);
@@ -3138,7 +3139,7 @@ void set_pmd_migration_entry(struct page_vma_mapped_walk *pvmw,
if (pmd_soft_dirty(pmdval))
pmdswp = pmd_swp_mksoft_dirty(pmdswp);
set_pmd_at(mm, address, pvmw->pmd, pmdswp);
- page_remove_rmap(page, true);
+ page_remove_rmap(page, vma, true);
put_page(page);
}
@@ -3168,10 +3169,8 @@ void remove_migration_pmd(struct page_vma_mapped_walk *pvmw, struct page *new)
if (PageAnon(new))
page_add_anon_rmap(new, vma, mmun_start, true);
else
- page_add_file_rmap(new, true);
+ page_add_file_rmap(new, vma, true);
set_pmd_at(mm, mmun_start, pvmw->pmd, pmde);
- if ((vma->vm_flags & VM_LOCKED) && !PageDoubleMap(new))
- mlock_vma_page(new);
update_mmu_cache_pmd(vma, address, pvmw->pmd);
}
#endif
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 61895cc01d09..43fb3155298e 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -5014,7 +5014,7 @@ static void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct
set_page_dirty(page);
hugetlb_count_sub(pages_per_huge_page(h), mm);
- page_remove_rmap(page, true);
+ page_remove_rmap(page, vma, true);
spin_unlock(ptl);
tlb_remove_page_size(tlb, page, huge_page_size(h));
@@ -5259,7 +5259,7 @@ static vm_fault_t hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
/* Break COW */
huge_ptep_clear_flush(vma, haddr, ptep);
mmu_notifier_invalidate_range(mm, range.start, range.end);
- page_remove_rmap(old_page, true);
+ page_remove_rmap(old_page, vma, true);
hugepage_add_new_anon_rmap(new_page, vma, haddr);
set_huge_pte_at(mm, haddr, ptep,
make_huge_pte(vma, new_page, 1));
diff --git a/mm/internal.h b/mm/internal.h
index f235aa92e564..3d7dfc8bc471 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -395,12 +395,35 @@ extern long faultin_vma_page_range(struct vm_area_struct *vma,
bool write, int *locked);
extern int mlock_future_check(struct mm_struct *mm, unsigned long flags,
unsigned long len);
-
/*
- * must be called with vma's mmap_lock held for read or write, and page locked.
+ * mlock_vma_page() and munlock_vma_page():
+ * should be called with vma's mmap_lock held for read or write,
+ * under page table lock for the pte/pmd being added or removed.
+ *
+ * mlock is usually called at the end of page_add_*_rmap(),
+ * munlock at the end of page_remove_rmap(); but new anon
+ * pages are managed in lru_cache_add_inactive_or_unevictable().
+ *
+ * @compound is used to include pmd mappings of THPs, but filter out
+ * pte mappings of THPs, which cannot be consistently counted: a pte
+ * mapping of the THP head cannot be distinguished by the page alone.
*/
-extern void mlock_vma_page(struct page *page);
-extern void munlock_vma_page(struct page *page);
+void mlock_page(struct page *page);
+static inline void mlock_vma_page(struct page *page,
+ struct vm_area_struct *vma, bool compound)
+{
+ if (unlikely(vma->vm_flags & VM_LOCKED) &&
+ (compound || !PageTransCompound(page)))
+ mlock_page(page);
+}
+void munlock_page(struct page *page);
+static inline void munlock_vma_page(struct page *page,
+ struct vm_area_struct *vma, bool compound)
+{
+ if (unlikely(vma->vm_flags & VM_LOCKED) &&
+ (compound || !PageTransCompound(page)))
+ munlock_page(page);
+}
/*
* Clear the page's PageMlocked(). This can be useful in a situation where
@@ -487,7 +510,10 @@ static inline struct file *maybe_unlock_mmap_for_io(struct vm_fault *vmf,
#else /* !CONFIG_MMU */
static inline void unmap_mapping_folio(struct folio *folio) { }
static inline void clear_page_mlock(struct page *page) { }
-static inline void mlock_vma_page(struct page *page) { }
+static inline void mlock_vma_page(struct page *page,
+ struct vm_area_struct *vma, bool compound) { }
+static inline void munlock_vma_page(struct page *page,
+ struct vm_area_struct *vma, bool compound) { }
static inline void vunmap_range_noflush(unsigned long start, unsigned long end)
{
}
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 35f14d0a00a6..d5e387c58bde 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -773,7 +773,7 @@ static void __collapse_huge_page_copy(pte_t *pte, struct page *page,
*/
spin_lock(ptl);
ptep_clear(vma->vm_mm, address, _pte);
- page_remove_rmap(src_page, false);
+ page_remove_rmap(src_page, vma, false);
spin_unlock(ptl);
free_page_and_swap_cache(src_page);
}
@@ -1497,7 +1497,7 @@ void collapse_pte_mapped_thp(struct mm_struct *mm, unsigned long addr)
if (pte_none(*pte))
continue;
page = vm_normal_page(vma, addr, *pte);
- page_remove_rmap(page, false);
+ page_remove_rmap(page, vma, false);
}
pte_unmap_unlock(start_pte, ptl);
diff --git a/mm/ksm.c b/mm/ksm.c
index c20bd4d9a0d9..c5a4403b5dc9 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1177,7 +1177,7 @@ static int replace_page(struct vm_area_struct *vma, struct page *page,
ptep_clear_flush(vma, addr, ptep);
set_pte_at_notify(mm, addr, ptep, newpte);
- page_remove_rmap(page, false);
+ page_remove_rmap(page, vma, false);
if (!page_mapped(page))
try_to_free_swap(page);
put_page(page);
@@ -1252,16 +1252,6 @@ static int try_to_merge_one_page(struct vm_area_struct *vma,
err = replace_page(vma, page, kpage, orig_pte);
}
- if ((vma->vm_flags & VM_LOCKED) && kpage && !err) {
- munlock_vma_page(page);
- if (!PageMlocked(kpage)) {
- unlock_page(page);
- lock_page(kpage);
- mlock_vma_page(kpage);
- page = kpage; /* for final unlock */
- }
- }
-
out_unlock:
unlock_page(page);
out:
diff --git a/mm/memory.c b/mm/memory.c
index c125c4969913..53bd9e5f2e33 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -735,9 +735,6 @@ static void restore_exclusive_pte(struct vm_area_struct *vma,
set_pte_at(vma->vm_mm, address, ptep, pte);
- if (vma->vm_flags & VM_LOCKED)
- mlock_vma_page(page);
-
/*
* No need to invalidate - it was non-present before. However
* secondary CPUs may have mappings that need invalidating.
@@ -1377,7 +1374,7 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb,
mark_page_accessed(page);
}
rss[mm_counter(page)]--;
- page_remove_rmap(page, false);
+ page_remove_rmap(page, vma, false);
if (unlikely(page_mapcount(page) < 0))
print_bad_pte(vma, addr, ptent, page);
if (unlikely(__tlb_remove_page(tlb, page))) {
@@ -1397,10 +1394,8 @@ static unsigned long zap_pte_range(struct mmu_gather *tlb,
continue;
pte_clear_not_present_full(mm, addr, pte, tlb->fullmm);
rss[mm_counter(page)]--;
-
if (is_device_private_entry(entry))
- page_remove_rmap(page, false);
-
+ page_remove_rmap(page, vma, false);
put_page(page);
continue;
}
@@ -1753,16 +1748,16 @@ static int validate_page_before_insert(struct page *page)
return 0;
}
-static int insert_page_into_pte_locked(struct mm_struct *mm, pte_t *pte,
+static int insert_page_into_pte_locked(struct vm_area_struct *vma, pte_t *pte,
unsigned long addr, struct page *page, pgprot_t prot)
{
if (!pte_none(*pte))
return -EBUSY;
/* Ok, finally just insert the thing.. */
get_page(page);
- inc_mm_counter_fast(mm, mm_counter_file(page));
- page_add_file_rmap(page, false);
- set_pte_at(mm, addr, pte, mk_pte(page, prot));
+ inc_mm_counter_fast(vma->vm_mm, mm_counter_file(page));
+ page_add_file_rmap(page, vma, false);
+ set_pte_at(vma->vm_mm, addr, pte, mk_pte(page, prot));
return 0;
}
@@ -1776,7 +1771,6 @@ static int insert_page_into_pte_locked(struct mm_struct *mm, pte_t *pte,
static int insert_page(struct vm_area_struct *vma, unsigned long addr,
struct page *page, pgprot_t prot)
{
- struct mm_struct *mm = vma->vm_mm;
int retval;
pte_t *pte;
spinlock_t *ptl;
@@ -1785,17 +1779,17 @@ static int insert_page(struct vm_area_struct *vma, unsigned long addr,
if (retval)
goto out;
retval = -ENOMEM;
- pte = get_locked_pte(mm, addr, &ptl);
+ pte = get_locked_pte(vma->vm_mm, addr, &ptl);
if (!pte)
goto out;
- retval = insert_page_into_pte_locked(mm, pte, addr, page, prot);
+ retval = insert_page_into_pte_locked(vma, pte, addr, page, prot);
pte_unmap_unlock(pte, ptl);
out:
return retval;
}
#ifdef pte_index
-static int insert_page_in_batch_locked(struct mm_struct *mm, pte_t *pte,
+static int insert_page_in_batch_locked(struct vm_area_struct *vma, pte_t *pte,
unsigned long addr, struct page *page, pgprot_t prot)
{
int err;
@@ -1805,7 +1799,7 @@ static int insert_page_in_batch_locked(struct mm_struct *mm, pte_t *pte,
err = validate_page_before_insert(page);
if (err)
return err;
- return insert_page_into_pte_locked(mm, pte, addr, page, prot);
+ return insert_page_into_pte_locked(vma, pte, addr, page, prot);
}
/* insert_pages() amortizes the cost of spinlock operations
@@ -1842,7 +1836,7 @@ static int insert_pages(struct vm_area_struct *vma, unsigned long addr,
start_pte = pte_offset_map_lock(mm, pmd, addr, &pte_lock);
for (pte = start_pte; pte_idx < batch_size; ++pte, ++pte_idx) {
- int err = insert_page_in_batch_locked(mm, pte,
+ int err = insert_page_in_batch_locked(vma, pte,
addr, pages[curr_page_idx], prot);
if (unlikely(err)) {
pte_unmap_unlock(start_pte, pte_lock);
@@ -3098,7 +3092,7 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf)
* mapcount is visible. So transitively, TLBs to
* old page will be flushed before it can be reused.
*/
- page_remove_rmap(old_page, false);
+ page_remove_rmap(old_page, vma, false);
}
/* Free the old page.. */
@@ -3118,16 +3112,6 @@ static vm_fault_t wp_page_copy(struct vm_fault *vmf)
*/
mmu_notifier_invalidate_range_only_end(&range);
if (old_page) {
- /*
- * Don't let another task, with possibly unlocked vma,
- * keep the mlocked page.
- */
- if (page_copied && (vma->vm_flags & VM_LOCKED)) {
- lock_page(old_page); /* LRU manipulation */
- if (PageMlocked(old_page))
- munlock_vma_page(old_page);
- unlock_page(old_page);
- }
if (page_copied)
free_swap_cache(old_page);
put_page(old_page);
@@ -3947,7 +3931,8 @@ vm_fault_t do_set_pmd(struct vm_fault *vmf, struct page *page)
entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
add_mm_counter(vma->vm_mm, mm_counter_file(page), HPAGE_PMD_NR);
- page_add_file_rmap(page, true);
+ page_add_file_rmap(page, vma, true);
+
/*
* deposit and withdraw with pmd lock held
*/
@@ -3996,7 +3981,7 @@ void do_set_pte(struct vm_fault *vmf, struct page *page, unsigned long addr)
lru_cache_add_inactive_or_unevictable(page, vma);
} else {
inc_mm_counter_fast(vma->vm_mm, mm_counter_file(page));
- page_add_file_rmap(page, false);
+ page_add_file_rmap(page, vma, false);
}
set_pte_at(vma->vm_mm, addr, vmf->pte, entry);
}
diff --git a/mm/migrate.c b/mm/migrate.c
index c7da064b4781..7c4223ce2500 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -248,14 +248,9 @@ static bool remove_migration_pte(struct page *page, struct vm_area_struct *vma,
if (PageAnon(new))
page_add_anon_rmap(new, vma, pvmw.address, false);
else
- page_add_file_rmap(new, false);
+ page_add_file_rmap(new, vma, false);
set_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
}
- if (vma->vm_flags & VM_LOCKED && !PageTransCompound(new))
- mlock_vma_page(new);
-
- if (PageTransHuge(page) && PageMlocked(page))
- clear_page_mlock(page);
/* No need to invalidate - it was non-present before */
update_mmu_cache(vma, pvmw.address, pvmw.pte);
@@ -2331,7 +2326,7 @@ static int migrate_vma_collect_pmd(pmd_t *pmdp,
* drop page refcount. Page won't be freed, as we took
* a reference just above.
*/
- page_remove_rmap(page, false);
+ page_remove_rmap(page, vma, false);
put_page(page);
if (pte_present(pte))
diff --git a/mm/mlock.c b/mm/mlock.c
index 5d7ced8303be..92f28258b4ae 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -78,17 +78,13 @@ void clear_page_mlock(struct page *page)
}
}
-/*
- * Mark page as mlocked if not already.
- * If page on LRU, isolate and putback to move to unevictable list.
+/**
+ * mlock_page - mlock a page
+ * @page: page to be mlocked, either a normal page or a THP head.
*/
-void mlock_vma_page(struct page *page)
+void mlock_page(struct page *page)
{
- /* Serialize with page migration */
- BUG_ON(!PageLocked(page));
-
VM_BUG_ON_PAGE(PageTail(page), page);
- VM_BUG_ON_PAGE(PageCompound(page) && PageDoubleMap(page), page);
if (!TestSetPageMlocked(page)) {
int nr_pages = thp_nr_pages(page);
@@ -101,14 +97,11 @@ void mlock_vma_page(struct page *page)
}
/**
- * munlock_vma_page - munlock a vma page
- * @page: page to be unlocked, either a normal page or THP page head
+ * munlock_page - munlock a page
+ * @page: page to be munlocked, either a normal page or a THP head.
*/
-void munlock_vma_page(struct page *page)
+void munlock_page(struct page *page)
{
- /* Serialize with page migration */
- BUG_ON(!PageLocked(page));
-
VM_BUG_ON_PAGE(PageTail(page), page);
if (TestClearPageMlocked(page)) {
diff --git a/mm/rmap.c b/mm/rmap.c
index 7ce7f1946cff..6cc8bf129f18 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1181,17 +1181,17 @@ void do_page_add_anon_rmap(struct page *page,
__mod_lruvec_page_state(page, NR_ANON_MAPPED, nr);
}
- if (unlikely(PageKsm(page))) {
+ if (unlikely(PageKsm(page)))
unlock_page_memcg(page);
- return;
- }
/* address might be in next vma when migration races vma_adjust */
- if (first)
+ else if (first)
__page_set_anon_rmap(page, vma, address,
flags & RMAP_EXCLUSIVE);
else
__page_check_anon_rmap(page, vma, address);
+
+ mlock_vma_page(page, vma, compound);
}
/**
@@ -1232,12 +1232,14 @@ void page_add_new_anon_rmap(struct page *page,
/**
* page_add_file_rmap - add pte mapping to a file page
- * @page: the page to add the mapping to
- * @compound: charge the page as compound or small page
+ * @page: the page to add the mapping to
+ * @vma: the vm area in which the mapping is added
+ * @compound: charge the page as compound or small page
*
* The caller needs to hold the pte lock.
*/
-void page_add_file_rmap(struct page *page, bool compound)
+void page_add_file_rmap(struct page *page,
+ struct vm_area_struct *vma, bool compound)
{
int i, nr = 1;
@@ -1260,13 +1262,8 @@ void page_add_file_rmap(struct page *page, bool compound)
nr_pages);
} else {
if (PageTransCompound(page) && page_mapping(page)) {
- struct page *head = compound_head(page);
-
VM_WARN_ON_ONCE(!PageLocked(page));
-
- SetPageDoubleMap(head);
- if (PageMlocked(page))
- clear_page_mlock(head);
+ SetPageDoubleMap(compound_head(page));
}
if (!atomic_inc_and_test(&page->_mapcount))
goto out;
@@ -1274,6 +1271,8 @@ void page_add_file_rmap(struct page *page, bool compound)
__mod_lruvec_page_state(page, NR_FILE_MAPPED, nr);
out:
unlock_page_memcg(page);
+
+ mlock_vma_page(page, vma, compound);
}
static void page_remove_file_rmap(struct page *page, bool compound)
@@ -1368,11 +1367,13 @@ static void page_remove_anon_compound_rmap(struct page *page)
/**
* page_remove_rmap - take down pte mapping from a page
* @page: page to remove mapping from
+ * @vma: the vm area from which the mapping is removed
* @compound: uncharge the page as compound or small page
*
* The caller needs to hold the pte lock.
*/
-void page_remove_rmap(struct page *page, bool compound)
+void page_remove_rmap(struct page *page,
+ struct vm_area_struct *vma, bool compound)
{
lock_page_memcg(page);
@@ -1414,6 +1415,8 @@ void page_remove_rmap(struct page *page, bool compound)
*/
out:
unlock_page_memcg(page);
+
+ munlock_vma_page(page, vma, compound);
}
/*
@@ -1469,28 +1472,21 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
mmu_notifier_invalidate_range_start(&range);
while (page_vma_mapped_walk(&pvmw)) {
+ /* Unexpected PMD-mapped THP? */
+ VM_BUG_ON_PAGE(!pvmw.pte, page);
+
/*
- * If the page is mlock()d, we cannot swap it out.
+ * If the page is in an mlock()d vma, we must not swap it out.
*/
if (!(flags & TTU_IGNORE_MLOCK) &&
(vma->vm_flags & VM_LOCKED)) {
- /*
- * PTE-mapped THP are never marked as mlocked: so do
- * not set it on a DoubleMap THP, nor on an Anon THP
- * (which may still be PTE-mapped after DoubleMap was
- * cleared). But stop unmapping even in those cases.
- */
- if (!PageTransCompound(page) || (PageHead(page) &&
- !PageDoubleMap(page) && !PageAnon(page)))
- mlock_vma_page(page);
+ /* Restore the mlock which got missed */
+ mlock_vma_page(page, vma, false);
page_vma_mapped_walk_done(&pvmw);
ret = false;
break;
}
- /* Unexpected PMD-mapped THP? */
- VM_BUG_ON_PAGE(!pvmw.pte, page);
-
subpage = page - page_to_pfn(page) + pte_pfn(*pvmw.pte);
address = pvmw.address;
@@ -1668,7 +1664,7 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
*
* See Documentation/vm/mmu_notifier.rst
*/
- page_remove_rmap(subpage, PageHuge(page));
+ page_remove_rmap(subpage, vma, PageHuge(page));
put_page(page);
}
@@ -1942,7 +1938,7 @@ static bool try_to_migrate_one(struct page *page, struct vm_area_struct *vma,
*
* See Documentation/vm/mmu_notifier.rst
*/
- page_remove_rmap(subpage, PageHuge(page));
+ page_remove_rmap(subpage, vma, PageHuge(page));
put_page(page);
}
@@ -2078,7 +2074,7 @@ static bool page_make_device_exclusive_one(struct page *page,
* There is a reference on the page for the swap entry which has
* been removed, so shouldn't take another.
*/
- page_remove_rmap(subpage, false);
+ page_remove_rmap(subpage, vma, false);
}
mmu_notifier_invalidate_range_end(&range);
diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
index 0780c2a57ff1..15d3e97a6e04 100644
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -95,10 +95,15 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
if (!pte_none(*dst_pte))
goto out_unlock;
- if (page_in_cache)
- page_add_file_rmap(page, false);
- else
+ if (page_in_cache) {
+ /* Usually, cache pages are already added to LRU */
+ if (newly_allocated)
+ lru_cache_add(page);
+ page_add_file_rmap(page, dst_vma, false);
+ } else {
page_add_new_anon_rmap(page, dst_vma, dst_addr, false);
+ lru_cache_add_inactive_or_unevictable(page, dst_vma);
+ }
/*
* Must happen after rmap, as mm_counter() checks mapping (via
@@ -106,9 +111,6 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
*/
inc_mm_counter(dst_mm, mm_counter(page));
- if (newly_allocated)
- lru_cache_add_inactive_or_unevictable(page, dst_vma);
-
set_pte_at(dst_mm, dst_addr, dst_pte, _dst_pte);
/* No need to invalidate - it was non-present before */
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
2022-02-15 2:26 ` [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Hugh Dickins
@ 2022-02-15 15:22 ` Matthew Wilcox
2022-02-15 21:38 ` Hugh Dickins
0 siblings, 1 reply; 29+ messages in thread
From: Matthew Wilcox @ 2022-02-15 15:22 UTC (permalink / raw)
To: Hugh Dickins
Cc: Andrew Morton, Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, Yang Li, linux-kernel, linux-mm
On Mon, Feb 14, 2022 at 06:26:39PM -0800, Hugh Dickins wrote:
> Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
> inline functions which check (vma->vm_flags & VM_LOCKED) before calling
> mlock_page() and munlock_page() in mm/mlock.c.
>
> Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
> because we have understandable difficulty in accounting pte maps of THPs,
> and if passed a PageHead page, mlock_page() and munlock_page() cannot
> tell whether it's a pmd map to be counted or a pte map to be ignored.
>
[...]
>
> Mlock accounting on THPs has been hard to define, differed between anon
> and file, involved PageDoubleMap in some places and not others, required
> clear_page_mlock() at some points. Keep it simple now: just count the
> pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
How would you suggest we handle the accounting for folios which are
intermediate in size between PMDs and PTEs? eg, an order-4 page?
Would it make sense to increment mlock_count by HUGE_PMD_NR for
each PMD mapping and by 1 for each PTE mapping?
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
2022-02-15 15:22 ` Matthew Wilcox
@ 2022-02-15 21:38 ` Hugh Dickins
2022-02-15 23:21 ` Matthew Wilcox
0 siblings, 1 reply; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 21:38 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Hugh Dickins, Andrew Morton, Michal Hocko, Vlastimil Babka,
Kirill A. Shutemov, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, Yang Li, linux-kernel, linux-mm
On Tue, 15 Feb 2022, Matthew Wilcox wrote:
> On Mon, Feb 14, 2022 at 06:26:39PM -0800, Hugh Dickins wrote:
> > Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
> > inline functions which check (vma->vm_flags & VM_LOCKED) before calling
> > mlock_page() and munlock_page() in mm/mlock.c.
> >
> > Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
> > because we have understandable difficulty in accounting pte maps of THPs,
> > and if passed a PageHead page, mlock_page() and munlock_page() cannot
> > tell whether it's a pmd map to be counted or a pte map to be ignored.
> >
> [...]
> >
> > Mlock accounting on THPs has been hard to define, differed between anon
> > and file, involved PageDoubleMap in some places and not others, required
> > clear_page_mlock() at some points. Keep it simple now: just count the
> > pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
>
> How would you suggest we handle the accounting for folios which are
> intermediate in size between PMDs and PTEs? eg, an order-4 page?
> Would it make sense to increment mlock_count by HUGE_PMD_NR for
> each PMD mapping and by 1 for each PTE mapping?
I think you're asking the wrong question here, but perhaps you've
already decided there's only one satisfactory answer to the right question.
To answer what you've asked: it doesn't matter at all how you count them
in mlock_count, just so long as they are counted up and down consistently.
Since it's simplest just to count 1 in mlock_count for each pmd or pte,
I prefer that (as I did with THPs); but if you prefer to count pmds up
and down by HUGE_PMD_NR, that works too.
Though, reading again, you're asking about a PMD mapping of an order-4
page? I don't understand how that could be allowed (except on some
non-x86 architecture where the page table fits only 16 pages).
The question I thought you should be asking is about how to count them
in Mlocked. That's tough; but I take it for granted that you would not
want per-subpage flags and counts involved (or not unless forced to do
so by some regression that turns out to matter). And I think the only
satisfactory answer is to count the whole compound_nr() as Mlocked
when any part of it (a single pte, a series of ptes, a pmd) is mlocked;
and (try to) move folio to Unevictable whenever any part of it is mlocked.
That differs from what Kirill decided for THPs (which I cannot
confidently describe, but something like count pmd as Mlocked, don't count
ptes as Mlocked, but uncount pmd if any ptes), and what I simplified it to
in the mm/munlock series (count pmd as Mlocked, ignore ptes), and will
tend to show larger numbers for Mlocked than before; but alternatives
seem unworkable to me.
Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread
* Re: [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
2022-02-15 21:38 ` Hugh Dickins
@ 2022-02-15 23:21 ` Matthew Wilcox
0 siblings, 0 replies; 29+ messages in thread
From: Matthew Wilcox @ 2022-02-15 23:21 UTC (permalink / raw)
To: Hugh Dickins
Cc: Andrew Morton, Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, Yang Li, linux-kernel, linux-mm
On Tue, Feb 15, 2022 at 01:38:20PM -0800, Hugh Dickins wrote:
> On Tue, 15 Feb 2022, Matthew Wilcox wrote:
> > On Mon, Feb 14, 2022 at 06:26:39PM -0800, Hugh Dickins wrote:
> > > Add vma argument to mlock_vma_page() and munlock_vma_page(), make them
> > > inline functions which check (vma->vm_flags & VM_LOCKED) before calling
> > > mlock_page() and munlock_page() in mm/mlock.c.
> > >
> > > Add bool compound to mlock_vma_page() and munlock_vma_page(): this is
> > > because we have understandable difficulty in accounting pte maps of THPs,
> > > and if passed a PageHead page, mlock_page() and munlock_page() cannot
> > > tell whether it's a pmd map to be counted or a pte map to be ignored.
> > >
> > [...]
> > >
> > > Mlock accounting on THPs has been hard to define, differed between anon
> > > and file, involved PageDoubleMap in some places and not others, required
> > > clear_page_mlock() at some points. Keep it simple now: just count the
> > > pmds and ignore the ptes, there is no reason for ptes to undo pmd mlocks.
> >
> > How would you suggest we handle the accounting for folios which are
> > intermediate in size between PMDs and PTEs? eg, an order-4 page?
> > Would it make sense to increment mlock_count by HUGE_PMD_NR for
> > each PMD mapping and by 1 for each PTE mapping?
>
> I think you're asking the wrong question here, but perhaps you've
> already decided there's only one satisfactory answer to the right question.
Or I've gravely misunderstood the situation. Or explained my concern
badly. The possibilities are endless!
My concern is that a filesystem may create an order-4 folio, an
application mmaps the folio and then calls mlock() (either over a portion
or the entirety of the folio). As far as I can tell, we then do not
move the folio onto the unevictable list because it is of order >0 and
is only mapped by PTEs. This presumably then has performance problems
(or we wouldn't need to have an unevictable list in the first place).
> The question I thought you should be asking is about how to count them
> in Mlocked. That's tough; but I take it for granted that you would not
> want per-subpage flags and counts involved (or not unless forced to do
> so by some regression that turns out to matter). And I think the only
> satisfactory answer is to count the whole compound_nr() as Mlocked
> when any part of it (a single pte, a series of ptes, a pmd) is mlocked;
> and (try to) move folio to Unevictable whenever any part of it is mlocked.
I think that makes sense. As with so many other things, we choose to
manage memory in >PAGE_SIZE chunks. If you mlock() a part of a folio,
we lock the whole folio in memory, and it all counts as being locked.
^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH v2 05/13] mm/munlock: replace clear_page_mlock() by final clearance
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (3 preceding siblings ...)
2022-02-15 2:26 ` [PATCH v2 04/13] mm/munlock: rmap call mlock_vma_page() munlock_vma_page() Hugh Dickins
@ 2022-02-15 2:28 ` Hugh Dickins
2022-02-15 2:29 ` [PATCH v2 06/13] mm/munlock: maintain page->mlock_count while unevictable Hugh Dickins
` (8 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:28 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
Placing munlock_vma_page() at the end of page_remove_rmap() shifts most
of the munlocking to clear_page_mlock(), since PageMlocked is typically
still set when mapcount has fallen to 0. That is not what we want: we
want /proc/vmstat's unevictable_pgs_cleared to remain as a useful check
on the integrity of of the mlock/munlock protocol - small numbers are
not surprising, but big numbers mean the protocol is not working.
That could be easily fixed by placing munlock_vma_page() at the start of
page_remove_rmap(); but later in the series we shall want to batch the
munlocking, and that too would tend to leave PageMlocked still set at
the point when it is checked.
So delete clear_page_mlock() now: leave it instead to release_pages()
(and __page_cache_release()) to do this backstop clearing of Mlocked,
when page refcount has fallen to 0. If a pinned page occasionally gets
counted as Mlocked and Unevictable until it is unpinned, that's okay.
A slightly regrettable side-effect of this change is that, since
release_pages() and __page_cache_release() may be called at interrupt
time, those places which update NR_MLOCK with interrupts enabled
had better use mod_zone_page_state() than __mod_zone_page_state()
(but holding the lruvec lock always has interrupts disabled).
This change, forcing Mlocked off when refcount 0 instead of earlier
when mapcount 0, is not fundamental: it can be reversed if performance
or something else is found to suffer; but this is the easiest way to
separate the stats - let's not complicate that without good reason.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: same as v1.
mm/internal.h | 12 ------------
mm/mlock.c | 30 ------------------------------
mm/rmap.c | 9 ---------
mm/swap.c | 32 ++++++++++++++++++++++++--------
4 files changed, 24 insertions(+), 59 deletions(-)
diff --git a/mm/internal.h b/mm/internal.h
index 3d7dfc8bc471..a43d79335c16 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -425,17 +425,6 @@ static inline void munlock_vma_page(struct page *page,
munlock_page(page);
}
-/*
- * Clear the page's PageMlocked(). This can be useful in a situation where
- * we want to unconditionally remove a page from the pagecache -- e.g.,
- * on truncation or freeing.
- *
- * It is legal to call this function for any page, mlocked or not.
- * If called for a page that is still mapped by mlocked vmas, all we do
- * is revert to lazy LRU behaviour -- semantics are not broken.
- */
-extern void clear_page_mlock(struct page *page);
-
extern pmd_t maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma);
/*
@@ -509,7 +498,6 @@ static inline struct file *maybe_unlock_mmap_for_io(struct vm_fault *vmf,
}
#else /* !CONFIG_MMU */
static inline void unmap_mapping_folio(struct folio *folio) { }
-static inline void clear_page_mlock(struct page *page) { }
static inline void mlock_vma_page(struct page *page,
struct vm_area_struct *vma, bool compound) { }
static inline void munlock_vma_page(struct page *page,
diff --git a/mm/mlock.c b/mm/mlock.c
index 92f28258b4ae..3c26473050a3 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -48,36 +48,6 @@ EXPORT_SYMBOL(can_do_mlock);
* PageUnevictable is set to indicate the unevictable state.
*/
-/*
- * LRU accounting for clear_page_mlock()
- */
-void clear_page_mlock(struct page *page)
-{
- int nr_pages;
-
- if (!TestClearPageMlocked(page))
- return;
-
- nr_pages = thp_nr_pages(page);
- mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
- count_vm_events(UNEVICTABLE_PGCLEARED, nr_pages);
- /*
- * The previous TestClearPageMlocked() corresponds to the smp_mb()
- * in __pagevec_lru_add_fn().
- *
- * See __pagevec_lru_add_fn for more explanation.
- */
- if (!isolate_lru_page(page)) {
- putback_lru_page(page);
- } else {
- /*
- * We lost the race. the page already moved to evictable list.
- */
- if (PageUnevictable(page))
- count_vm_events(UNEVICTABLE_PGSTRANDED, nr_pages);
- }
-}
-
/**
* mlock_page - mlock a page
* @page: page to be mlocked, either a normal page or a THP head.
diff --git a/mm/rmap.c b/mm/rmap.c
index 6cc8bf129f18..5442a5c97a85 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1315,9 +1315,6 @@ static void page_remove_file_rmap(struct page *page, bool compound)
* pte lock(a spinlock) is held, which implies preemption disabled.
*/
__mod_lruvec_page_state(page, NR_FILE_MAPPED, -nr);
-
- if (unlikely(PageMlocked(page)))
- clear_page_mlock(page);
}
static void page_remove_anon_compound_rmap(struct page *page)
@@ -1357,9 +1354,6 @@ static void page_remove_anon_compound_rmap(struct page *page)
nr = thp_nr_pages(page);
}
- if (unlikely(PageMlocked(page)))
- clear_page_mlock(page);
-
if (nr)
__mod_lruvec_page_state(page, NR_ANON_MAPPED, -nr);
}
@@ -1398,9 +1392,6 @@ void page_remove_rmap(struct page *page,
*/
__dec_lruvec_page_state(page, NR_ANON_MAPPED);
- if (unlikely(PageMlocked(page)))
- clear_page_mlock(page);
-
if (PageTransCompound(page))
deferred_split_huge_page(compound_head(page));
diff --git a/mm/swap.c b/mm/swap.c
index bcf3ac288b56..ff4810e4a4bc 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -74,8 +74,8 @@ static DEFINE_PER_CPU(struct lru_pvecs, lru_pvecs) = {
};
/*
- * This path almost never happens for VM activity - pages are normally
- * freed via pagevecs. But it gets used by networking.
+ * This path almost never happens for VM activity - pages are normally freed
+ * via pagevecs. But it gets used by networking - and for compound pages.
*/
static void __page_cache_release(struct page *page)
{
@@ -89,6 +89,14 @@ static void __page_cache_release(struct page *page)
__clear_page_lru_flags(page);
unlock_page_lruvec_irqrestore(lruvec, flags);
}
+ /* See comment on PageMlocked in release_pages() */
+ if (unlikely(PageMlocked(page))) {
+ int nr_pages = thp_nr_pages(page);
+
+ __ClearPageMlocked(page);
+ mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
+ count_vm_events(UNEVICTABLE_PGCLEARED, nr_pages);
+ }
__ClearPageWaiters(page);
}
@@ -489,12 +497,8 @@ void lru_cache_add_inactive_or_unevictable(struct page *page,
unevictable = (vma->vm_flags & (VM_LOCKED | VM_SPECIAL)) == VM_LOCKED;
if (unlikely(unevictable) && !TestSetPageMlocked(page)) {
int nr_pages = thp_nr_pages(page);
- /*
- * We use the irq-unsafe __mod_zone_page_state because this
- * counter is not modified from interrupt context, and the pte
- * lock is held(spinlock), which implies preemption disabled.
- */
- __mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
+
+ mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
}
lru_cache_add(page);
@@ -969,6 +973,18 @@ void release_pages(struct page **pages, int nr)
__clear_page_lru_flags(page);
}
+ /*
+ * In rare cases, when truncation or holepunching raced with
+ * munlock after VM_LOCKED was cleared, Mlocked may still be
+ * found set here. This does not indicate a problem, unless
+ * "unevictable_pgs_cleared" appears worryingly large.
+ */
+ if (unlikely(PageMlocked(page))) {
+ __ClearPageMlocked(page);
+ dec_zone_page_state(page, NR_MLOCK);
+ count_vm_event(UNEVICTABLE_PGCLEARED);
+ }
+
__ClearPageWaiters(page);
list_add(&page->lru, &pages_to_free);
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 06/13] mm/munlock: maintain page->mlock_count while unevictable
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (4 preceding siblings ...)
2022-02-15 2:28 ` [PATCH v2 05/13] mm/munlock: replace clear_page_mlock() by final clearance Hugh Dickins
@ 2022-02-15 2:29 ` Hugh Dickins
2022-02-15 2:31 ` [PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking Hugh Dickins
` (7 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:29 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
Previous patches have been preparatory: now implement page->mlock_count.
The ordering of the "Unevictable LRU" is of no significance, and there is
no point holding unevictable pages on a list: place page->mlock_count to
overlay page->lru.prev (since page->lru.next is overlaid by compound_head,
which needs to be even so as not to satisfy PageTail - though 2 could be
added instead of 1 for each mlock, if that's ever an improvement).
But it's only safe to rely on or modify page->mlock_count while lruvec
lock is held and page is on unevictable "LRU" - we can save lots of edits
by continuing to pretend that there's an imaginary LRU here (there is an
unevictable count which still needs to be maintained, but not a list).
The mlock_count technique suffers from an unreliability much like with
page_mlock(): while someone else has the page off LRU, not much can
be done. As before, err on the safe side (behave as if mlock_count 0),
and let try_to_unlock_one() move the page to unevictable if reclaim finds
out later on - a few misplaced pages don't matter, what we want to avoid
is imbalancing reclaim by flooding evictable lists with unevictable pages.
I am not a fan of "if (!isolate_lru_page(page)) putback_lru_page(page);":
if we have taken lruvec lock to get the page off its present list, then
we save everyone trouble (and however many extra atomic ops) by putting
it on its destination list immediately.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: same as v1.
include/linux/mm_inline.h | 11 +++++--
include/linux/mm_types.h | 19 +++++++++--
mm/huge_memory.c | 5 ++-
mm/memcontrol.c | 3 +-
mm/mlock.c | 68 +++++++++++++++++++++++++++++++--------
mm/mmzone.c | 7 ++++
mm/swap.c | 1 +
7 files changed, 92 insertions(+), 22 deletions(-)
diff --git a/include/linux/mm_inline.h b/include/linux/mm_inline.h
index b725839dfe71..884d6f6af05b 100644
--- a/include/linux/mm_inline.h
+++ b/include/linux/mm_inline.h
@@ -99,7 +99,8 @@ void lruvec_add_folio(struct lruvec *lruvec, struct folio *folio)
update_lru_size(lruvec, lru, folio_zonenum(folio),
folio_nr_pages(folio));
- list_add(&folio->lru, &lruvec->lists[lru]);
+ if (lru != LRU_UNEVICTABLE)
+ list_add(&folio->lru, &lruvec->lists[lru]);
}
static __always_inline void add_page_to_lru_list(struct page *page,
@@ -115,6 +116,7 @@ void lruvec_add_folio_tail(struct lruvec *lruvec, struct folio *folio)
update_lru_size(lruvec, lru, folio_zonenum(folio),
folio_nr_pages(folio));
+ /* This is not expected to be used on LRU_UNEVICTABLE */
list_add_tail(&folio->lru, &lruvec->lists[lru]);
}
@@ -127,8 +129,11 @@ static __always_inline void add_page_to_lru_list_tail(struct page *page,
static __always_inline
void lruvec_del_folio(struct lruvec *lruvec, struct folio *folio)
{
- list_del(&folio->lru);
- update_lru_size(lruvec, folio_lru_list(folio), folio_zonenum(folio),
+ enum lru_list lru = folio_lru_list(folio);
+
+ if (lru != LRU_UNEVICTABLE)
+ list_del(&folio->lru);
+ update_lru_size(lruvec, lru, folio_zonenum(folio),
-folio_nr_pages(folio));
}
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 5140e5feb486..475bdb282769 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -85,7 +85,16 @@ struct page {
* lruvec->lru_lock. Sometimes used as a generic list
* by the page owner.
*/
- struct list_head lru;
+ union {
+ struct list_head lru;
+ /* Or, for the Unevictable "LRU list" slot */
+ struct {
+ /* Always even, to negate PageTail */
+ void *__filler;
+ /* Count page's or folio's mlocks */
+ unsigned int mlock_count;
+ };
+ };
/* See page-flags.h for PAGE_MAPPING_FLAGS */
struct address_space *mapping;
pgoff_t index; /* Our offset within mapping. */
@@ -241,7 +250,13 @@ struct folio {
struct {
/* public: */
unsigned long flags;
- struct list_head lru;
+ union {
+ struct list_head lru;
+ struct {
+ void *__filler;
+ unsigned int mlock_count;
+ };
+ };
struct address_space *mapping;
pgoff_t index;
void *private;
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index d6477f48a27e..9afca0122723 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2300,8 +2300,11 @@ static void lru_add_page_tail(struct page *head, struct page *tail,
} else {
/* head is still on lru (and we have it frozen) */
VM_WARN_ON(!PageLRU(head));
+ if (PageUnevictable(tail))
+ tail->mlock_count = 0;
+ else
+ list_add_tail(&tail->lru, &head->lru);
SetPageLRU(tail);
- list_add_tail(&tail->lru, &head->lru);
}
}
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 09d342c7cbd0..b10590926177 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1257,8 +1257,7 @@ struct lruvec *folio_lruvec_lock_irqsave(struct folio *folio,
* @nr_pages: positive when adding or negative when removing
*
* This function must be called under lru_lock, just before a page is added
- * to or just after a page is removed from an lru list (that ordering being
- * so as to allow it to check that lru_size 0 is consistent with list_empty).
+ * to or just after a page is removed from an lru list.
*/
void mem_cgroup_update_lru_size(struct lruvec *lruvec, enum lru_list lru,
int zid, int nr_pages)
diff --git a/mm/mlock.c b/mm/mlock.c
index 3c26473050a3..f8a3a54687dd 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -54,16 +54,35 @@ EXPORT_SYMBOL(can_do_mlock);
*/
void mlock_page(struct page *page)
{
+ struct lruvec *lruvec;
+ int nr_pages = thp_nr_pages(page);
+
VM_BUG_ON_PAGE(PageTail(page), page);
if (!TestSetPageMlocked(page)) {
- int nr_pages = thp_nr_pages(page);
-
mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
- count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
- if (!isolate_lru_page(page))
- putback_lru_page(page);
+ __count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
+ }
+
+ /* There is nothing more we can do while it's off LRU */
+ if (!TestClearPageLRU(page))
+ return;
+
+ lruvec = folio_lruvec_lock_irq(page_folio(page));
+ if (PageUnevictable(page)) {
+ page->mlock_count++;
+ goto out;
}
+
+ del_page_from_lru_list(page, lruvec);
+ ClearPageActive(page);
+ SetPageUnevictable(page);
+ page->mlock_count = 1;
+ add_page_to_lru_list(page, lruvec);
+ __count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
+out:
+ SetPageLRU(page);
+ unlock_page_lruvec_irq(lruvec);
}
/**
@@ -72,19 +91,40 @@ void mlock_page(struct page *page)
*/
void munlock_page(struct page *page)
{
+ struct lruvec *lruvec;
+ int nr_pages = thp_nr_pages(page);
+
VM_BUG_ON_PAGE(PageTail(page), page);
+ lock_page_memcg(page);
+ lruvec = folio_lruvec_lock_irq(page_folio(page));
+ if (PageLRU(page) && PageUnevictable(page)) {
+ /* Then mlock_count is maintained, but might undercount */
+ if (page->mlock_count)
+ page->mlock_count--;
+ if (page->mlock_count)
+ goto out;
+ }
+ /* else assume that was the last mlock: reclaim will fix it if not */
+
if (TestClearPageMlocked(page)) {
- int nr_pages = thp_nr_pages(page);
-
- mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
- if (!isolate_lru_page(page)) {
- putback_lru_page(page);
- count_vm_events(UNEVICTABLE_PGMUNLOCKED, nr_pages);
- } else if (PageUnevictable(page)) {
- count_vm_events(UNEVICTABLE_PGSTRANDED, nr_pages);
- }
+ __mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
+ if (PageLRU(page) || !PageUnevictable(page))
+ __count_vm_events(UNEVICTABLE_PGMUNLOCKED, nr_pages);
+ else
+ __count_vm_events(UNEVICTABLE_PGSTRANDED, nr_pages);
+ }
+
+ /* page_evictable() has to be checked *after* clearing Mlocked */
+ if (PageLRU(page) && PageUnevictable(page) && page_evictable(page)) {
+ del_page_from_lru_list(page, lruvec);
+ ClearPageUnevictable(page);
+ add_page_to_lru_list(page, lruvec);
+ __count_vm_events(UNEVICTABLE_PGRESCUED, nr_pages);
}
+out:
+ unlock_page_lruvec_irq(lruvec);
+ unlock_page_memcg(page);
}
/*
diff --git a/mm/mmzone.c b/mm/mmzone.c
index eb89d6e018e2..40e1d9428300 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -81,6 +81,13 @@ void lruvec_init(struct lruvec *lruvec)
for_each_lru(lru)
INIT_LIST_HEAD(&lruvec->lists[lru]);
+ /*
+ * The "Unevictable LRU" is imaginary: though its size is maintained,
+ * it is never scanned, and unevictable pages are not threaded on it
+ * (so that their lru fields can be reused to hold mlock_count).
+ * Poison its list head, so that any operations on it would crash.
+ */
+ list_del(&lruvec->lists[LRU_UNEVICTABLE]);
}
#if defined(CONFIG_NUMA_BALANCING) && !defined(LAST_CPUPID_NOT_IN_PAGE_FLAGS)
diff --git a/mm/swap.c b/mm/swap.c
index ff4810e4a4bc..682a03301a2c 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -1062,6 +1062,7 @@ static void __pagevec_lru_add_fn(struct folio *folio, struct lruvec *lruvec)
} else {
folio_clear_active(folio);
folio_set_unevictable(folio);
+ folio->mlock_count = !!folio_test_mlocked(folio);
if (!was_unevictable)
__count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (5 preceding siblings ...)
2022-02-15 2:29 ` [PATCH v2 06/13] mm/munlock: maintain page->mlock_count while unevictable Hugh Dickins
@ 2022-02-15 2:31 ` Hugh Dickins
2022-02-18 6:35 ` kernel test robot
2022-02-15 2:33 ` [PATCH v2 08/13] mm/migrate: __unmap_and_move() push good newpage to LRU Hugh Dickins
` (6 subsequent siblings)
13 siblings, 1 reply; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:31 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, Hillf Danton, linux-kernel, linux-mm
Fill in missing pieces: reimplementation of munlock_vma_pages_range(),
required to lower the mlock_counts when munlocking without munmapping;
and its complement, implementation of mlock_vma_pages_range(), required
to raise the mlock_counts on pages already there when a range is mlocked.
Combine them into just the one function mlock_vma_pages_range(), using
walk_page_range() to run mlock_pte_range(). This approach fixes the
"Very slow unlockall()" of unpopulated PROT_NONE areas, reported in
https://lore.kernel.org/linux-mm/70885d37-62b7-748b-29df-9e94f3291736@gmail.com/
Munlock clears VM_LOCKED at the start, under exclusive mmap_lock; but if
a racing truncate or holepunch (depending on i_mmap_rwsem) gets to the
pte first, it will not try to munlock the page: leaving release_pages()
to correct it when the last reference to the page is gone - that's okay,
a page is not evictable anyway while it is held by an extra reference.
Mlock sets VM_LOCKED at the start, under exclusive mmap_lock; but if
a racing remove_migration_pte() or try_to_unmap_one() (depending on
i_mmap_rwsem) gets to the pte first, it will try to mlock the page,
then mlock_pte_range() mlock it a second time. This is harder to
reproduce, but a more serious race because it could leave the page
unevictable indefinitely though the area is munlocked afterwards.
Guard against it by setting the (inappropriate) VM_IO flag,
and modifying mlock_vma_page() to decline such vmas.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: Delete reintroduced VM_LOCKED_CLEAR_MASKing here, per Vlastimil.
Use oldflags instead of vma->vm_flags in mlock_fixup(), per Vlastimil.
Make clearer comment on mmap_lock and WRITE_ONCE, per Hillf.
mm/internal.h | 3 +-
mm/mlock.c | 111 ++++++++++++++++++++++++++++++++++++++++----------
2 files changed, 91 insertions(+), 23 deletions(-)
diff --git a/mm/internal.h b/mm/internal.h
index a43d79335c16..b3f0dd3ffba2 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -412,7 +412,8 @@ void mlock_page(struct page *page);
static inline void mlock_vma_page(struct page *page,
struct vm_area_struct *vma, bool compound)
{
- if (unlikely(vma->vm_flags & VM_LOCKED) &&
+ /* VM_IO check prevents migration from double-counting during mlock */
+ if (unlikely((vma->vm_flags & (VM_LOCKED|VM_IO)) == VM_LOCKED) &&
(compound || !PageTransCompound(page)))
mlock_page(page);
}
diff --git a/mm/mlock.c b/mm/mlock.c
index f8a3a54687dd..581ea8bf1b83 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -14,6 +14,7 @@
#include <linux/swapops.h>
#include <linux/pagemap.h>
#include <linux/pagevec.h>
+#include <linux/pagewalk.h>
#include <linux/mempolicy.h>
#include <linux/syscalls.h>
#include <linux/sched.h>
@@ -127,25 +128,91 @@ void munlock_page(struct page *page)
unlock_page_memcg(page);
}
+static int mlock_pte_range(pmd_t *pmd, unsigned long addr,
+ unsigned long end, struct mm_walk *walk)
+
+{
+ struct vm_area_struct *vma = walk->vma;
+ spinlock_t *ptl;
+ pte_t *start_pte, *pte;
+ struct page *page;
+
+ ptl = pmd_trans_huge_lock(pmd, vma);
+ if (ptl) {
+ if (!pmd_present(*pmd))
+ goto out;
+ if (is_huge_zero_pmd(*pmd))
+ goto out;
+ page = pmd_page(*pmd);
+ if (vma->vm_flags & VM_LOCKED)
+ mlock_page(page);
+ else
+ munlock_page(page);
+ goto out;
+ }
+
+ start_pte = pte_offset_map_lock(vma->vm_mm, pmd, addr, &ptl);
+ for (pte = start_pte; addr != end; pte++, addr += PAGE_SIZE) {
+ if (!pte_present(*pte))
+ continue;
+ page = vm_normal_page(vma, addr, *pte);
+ if (!page)
+ continue;
+ if (PageTransCompound(page))
+ continue;
+ if (vma->vm_flags & VM_LOCKED)
+ mlock_page(page);
+ else
+ munlock_page(page);
+ }
+ pte_unmap(start_pte);
+out:
+ spin_unlock(ptl);
+ cond_resched();
+ return 0;
+}
+
/*
- * munlock_vma_pages_range() - munlock all pages in the vma range.'
- * @vma - vma containing range to be munlock()ed.
+ * mlock_vma_pages_range() - mlock any pages already in the range,
+ * or munlock all pages in the range.
+ * @vma - vma containing range to be mlock()ed or munlock()ed
* @start - start address in @vma of the range
- * @end - end of range in @vma.
- *
- * For mremap(), munmap() and exit().
+ * @end - end of range in @vma
+ * @newflags - the new set of flags for @vma.
*
- * Called with @vma VM_LOCKED.
- *
- * Returns with VM_LOCKED cleared. Callers must be prepared to
- * deal with this.
+ * Called for mlock(), mlock2() and mlockall(), to set @vma VM_LOCKED;
+ * called for munlock() and munlockall(), to clear VM_LOCKED from @vma.
*/
-static void munlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+static void mlock_vma_pages_range(struct vm_area_struct *vma,
+ unsigned long start, unsigned long end, vm_flags_t newflags)
{
- vma->vm_flags &= VM_LOCKED_CLEAR_MASK;
+ static const struct mm_walk_ops mlock_walk_ops = {
+ .pmd_entry = mlock_pte_range,
+ };
- /* Reimplementation to follow in later commit */
+ /*
+ * There is a slight chance that concurrent page migration,
+ * or page reclaim finding a page of this now-VM_LOCKED vma,
+ * will call mlock_vma_page() and raise page's mlock_count:
+ * double counting, leaving the page unevictable indefinitely.
+ * Communicate this danger to mlock_vma_page() with VM_IO,
+ * which is a VM_SPECIAL flag not allowed on VM_LOCKED vmas.
+ * mmap_lock is held in write mode here, so this weird
+ * combination should not be visible to other mmap_lock users;
+ * but WRITE_ONCE so rmap walkers must see VM_IO if VM_LOCKED.
+ */
+ if (newflags & VM_LOCKED)
+ newflags |= VM_IO;
+ WRITE_ONCE(vma->vm_flags, newflags);
+
+ lru_add_drain();
+ walk_page_range(vma->vm_mm, start, end, &mlock_walk_ops, NULL);
+ lru_add_drain();
+
+ if (newflags & VM_IO) {
+ newflags &= ~VM_IO;
+ WRITE_ONCE(vma->vm_flags, newflags);
+ }
}
/*
@@ -164,10 +231,9 @@ static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev,
pgoff_t pgoff;
int nr_pages;
int ret = 0;
- int lock = !!(newflags & VM_LOCKED);
- vm_flags_t old_flags = vma->vm_flags;
+ vm_flags_t oldflags = vma->vm_flags;
- if (newflags == vma->vm_flags || (vma->vm_flags & VM_SPECIAL) ||
+ if (newflags == oldflags || (oldflags & VM_SPECIAL) ||
is_vm_hugetlb_page(vma) || vma == get_gate_vma(current->mm) ||
vma_is_dax(vma) || vma_is_secretmem(vma))
/* don't set VM_LOCKED or VM_LOCKONFAULT and don't count */
@@ -199,9 +265,9 @@ static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev,
* Keep track of amount of locked VM.
*/
nr_pages = (end - start) >> PAGE_SHIFT;
- if (!lock)
+ if (!(newflags & VM_LOCKED))
nr_pages = -nr_pages;
- else if (old_flags & VM_LOCKED)
+ else if (oldflags & VM_LOCKED)
nr_pages = 0;
mm->locked_vm += nr_pages;
@@ -211,11 +277,12 @@ static int mlock_fixup(struct vm_area_struct *vma, struct vm_area_struct **prev,
* set VM_LOCKED, populate_vma_page_range will bring it back.
*/
- if (lock)
+ if ((newflags & VM_LOCKED) && (oldflags & VM_LOCKED)) {
+ /* No work to do, and mlocking twice would be wrong */
vma->vm_flags = newflags;
- else
- munlock_vma_pages_range(vma, start, end);
-
+ } else {
+ mlock_vma_pages_range(vma, start, end, newflags);
+ }
out:
*prev = vma;
return ret;
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
2022-02-15 2:31 ` [PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking Hugh Dickins
@ 2022-02-18 6:35 ` kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-02-18 6:35 UTC (permalink / raw)
To: Hugh Dickins
Cc: 0day robot, Vlastimil Babka, LKML, lkp, ying.huang, feng.tang,
zhengjun.xing, fengwei.yin, Andrew Morton, Michal Hocko,
Kirill A. Shutemov, Matthew Wilcox, David Hildenbrand,
Alistair Popple, Johannes Weiner, Rik van Riel,
Suren Baghdasaryan, Yu Zhao, Greg Thelen, Shakeel Butt,
Hillf Danton, linux-mm
[-- Attachment #1: Type: text/plain, Size: 24611 bytes --]
Greeting,
FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb@google.com
in testcase: stress-ng
on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
with following parameters:
nr_threads: 100%
testtime: 60s
class: memory
test: remap
cpufreq_governor: performance
ucode: 0xd000280
If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>
Details are as below:
-------------------------------------------------------------------------------------------------->
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
sudo bin/lkp install job.yaml # job file is attached in this email
bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
sudo bin/lkp run generated-yaml-file
# if come across any failure that blocks the test,
# please remove ~/.lkp and /lkp dir to run from a clean state.
=========================================================================================
class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
commit:
c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
c479426e09c8088d 237b4454014d3759acc6459eb32
---------------- ---------------------------
%stddev %change %stddev
\ | \
109459 -62.5% 41003 ± 2% stress-ng.remap.ops
1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
0.48 -0.2 0.26 ± 2% mpstat.cpu.all.usr%
439776 +35.9% 597819 meminfo.Inactive
439776 +35.9% 597819 meminfo.Inactive(anon)
157638 -99.8% 247.00 meminfo.Mlocked
289539 ± 17% +30.0% 376365 ± 5% numa-meminfo.node0.Inactive
289539 ± 17% +30.0% 376365 ± 5% numa-meminfo.node0.Inactive(anon)
77981 -99.8% 126.50 numa-meminfo.node0.Mlocked
79990 ± 2% -99.9% 119.50 numa-meminfo.node1.Mlocked
72605 ± 17% +29.8% 94255 ± 5% numa-vmstat.node0.nr_inactive_anon
19407 -99.8% 31.50 ± 2% numa-vmstat.node0.nr_mlock
72603 ± 17% +29.8% 94255 ± 5% numa-vmstat.node0.nr_zone_inactive_anon
20066 ± 2% -99.9% 29.50 numa-vmstat.node1.nr_mlock
110126 +35.6% 149376 proc-vmstat.nr_inactive_anon
61898 +1.2% 62642 proc-vmstat.nr_mapped
39411 -99.8% 61.33 proc-vmstat.nr_mlock
661395 -5.9% 622058 proc-vmstat.nr_unevictable
110126 +35.6% 149376 proc-vmstat.nr_zone_inactive_anon
661395 -5.9% 622058 proc-vmstat.nr_zone_unevictable
1039724 -17.6% 856602 proc-vmstat.numa_hit
928057 -20.2% 740906 proc-vmstat.numa_local
1039735 -17.7% 855482 proc-vmstat.pgalloc_normal
2.247e+08 -62.4% 84468472 ± 2% proc-vmstat.pgfault
802397 ± 4% -26.1% 593350 ± 7% proc-vmstat.pgfree
55865 ± 38% -100.0% 0.00 proc-vmstat.unevictable_pgs_cleared
1.121e+08 +49.8% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_culled
1.121e+08 +49.8% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_mlocked
1.12e+08 +49.9% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_munlocked
1.12e+08 +49.9% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_rescued
3.06 ± 11% +33.6% 4.09 ± 9% perf-stat.i.MPKI
1.555e+10 -29.1% 1.102e+10 perf-stat.i.branch-instructions
0.63 ± 3% -0.2 0.47 ± 4% perf-stat.i.branch-miss-rate%
86979814 -49.4% 44006612 ± 2% perf-stat.i.branch-misses
5.57 +45.0% 8.08 perf-stat.i.cpi
0.03 ± 8% -0.0 0.02 ± 12% perf-stat.i.dTLB-load-miss-rate%
4465030 -50.5% 2211973 ± 3% perf-stat.i.dTLB-load-misses
1.882e+10 -32.8% 1.265e+10 perf-stat.i.dTLB-loads
6.515e+09 -52.5% 3.095e+09 ± 2% perf-stat.i.dTLB-stores
7.012e+10 -30.9% 4.842e+10 perf-stat.i.instructions
0.20 ± 2% -26.4% 0.15 ± 2% perf-stat.i.ipc
321.02 -34.4% 210.63 perf-stat.i.metric.M/sec
2061534 -57.3% 879696 ± 2% perf-stat.i.node-loads
531446 ± 7% -31.1% 366181 ± 21% perf-stat.i.node-stores
2.89 ± 9% +37.5% 3.97 ± 10% perf-stat.overall.MPKI
0.56 -0.2 0.40 ± 2% perf-stat.overall.branch-miss-rate%
5.71 +45.1% 8.28 perf-stat.overall.cpi
0.02 -0.0 0.02 ± 2% perf-stat.overall.dTLB-load-miss-rate%
0.00 ± 11% +0.0 0.00 ± 11% perf-stat.overall.dTLB-store-miss-rate%
0.18 -31.1% 0.12 perf-stat.overall.ipc
1.532e+10 -29.1% 1.086e+10 perf-stat.ps.branch-instructions
85628106 -49.4% 43291977 ± 2% perf-stat.ps.branch-misses
4429976 -49.9% 2220756 ± 3% perf-stat.ps.dTLB-load-misses
1.854e+10 -32.8% 1.246e+10 perf-stat.ps.dTLB-loads
6.417e+09 -52.5% 3.049e+09 ± 2% perf-stat.ps.dTLB-stores
6.906e+10 -31.0% 4.769e+10 perf-stat.ps.instructions
2037560 -57.2% 872256 ± 2% perf-stat.ps.node-loads
522322 ± 7% -31.0% 360168 ± 21% perf-stat.ps.node-stores
4.39e+12 -31.2% 3.021e+12 perf-stat.total.instructions
98.28 -47.8 50.50 perf-profile.calltrace.cycles-pp.remap_file_pages
98.14 -47.7 50.44 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.remap_file_pages
98.07 -47.6 50.42 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
98.03 -47.6 50.40 perf-profile.calltrace.cycles-pp.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
50.17 -24.4 25.79 perf-profile.calltrace.cycles-pp.do_mmap.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
50.01 -24.3 25.72 perf-profile.calltrace.cycles-pp.mmap_region.do_mmap.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe
48.46 -23.3 25.16 perf-profile.calltrace.cycles-pp.__do_munmap.mmap_region.do_mmap.__x64_sys_remap_file_pages.do_syscall_64
47.70 -23.1 24.56 perf-profile.calltrace.cycles-pp.__mm_populate.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
47.52 -23.0 24.49 perf-profile.calltrace.cycles-pp.populate_vma_page_range.__mm_populate.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe
47.50 -23.0 24.49 perf-profile.calltrace.cycles-pp.__get_user_pages.populate_vma_page_range.__mm_populate.__x64_sys_remap_file_pages.do_syscall_64
47.80 -22.9 24.92 perf-profile.calltrace.cycles-pp.unmap_region.__do_munmap.mmap_region.do_mmap.__x64_sys_remap_file_pages
47.14 -22.8 24.36 perf-profile.calltrace.cycles-pp.handle_mm_fault.__get_user_pages.populate_vma_page_range.__mm_populate.__x64_sys_remap_file_pages
47.06 -22.7 24.33 perf-profile.calltrace.cycles-pp.__handle_mm_fault.handle_mm_fault.__get_user_pages.populate_vma_page_range.__mm_populate
46.97 -22.7 24.30 perf-profile.calltrace.cycles-pp.do_fault.__handle_mm_fault.handle_mm_fault.__get_user_pages.populate_vma_page_range
46.94 -22.7 24.29 perf-profile.calltrace.cycles-pp.filemap_map_pages.do_fault.__handle_mm_fault.handle_mm_fault.__get_user_pages
46.56 -22.4 24.12 perf-profile.calltrace.cycles-pp.do_set_pte.filemap_map_pages.do_fault.__handle_mm_fault.handle_mm_fault
46.91 -22.3 24.58 perf-profile.calltrace.cycles-pp.unmap_vmas.unmap_region.__do_munmap.mmap_region.do_mmap
46.38 -22.3 24.06 perf-profile.calltrace.cycles-pp.mlock_page.do_set_pte.filemap_map_pages.do_fault.__handle_mm_fault
46.84 -22.3 24.55 perf-profile.calltrace.cycles-pp.unmap_page_range.unmap_vmas.unmap_region.__do_munmap.mmap_region
46.72 -22.2 24.51 perf-profile.calltrace.cycles-pp.zap_pte_range.unmap_page_range.unmap_vmas.unmap_region.__do_munmap
45.95 -22.1 23.82 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.mlock_page.do_set_pte.filemap_map_pages.do_fault
45.82 -22.0 23.78 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.do_set_pte.filemap_map_pages
45.64 -21.9 23.72 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.do_set_pte
46.18 -21.9 24.32 perf-profile.calltrace.cycles-pp.munlock_page.zap_pte_range.unmap_page_range.unmap_vmas.unmap_region
45.70 -21.7 24.00 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.munlock_page.zap_pte_range.unmap_page_range.unmap_vmas
45.61 -21.6 23.97 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.zap_pte_range.unmap_page_range
45.42 -21.5 23.91 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.zap_pte_range
1.05 ± 2% +23.7 24.78 perf-profile.calltrace.cycles-pp.mlock
0.93 ± 2% +23.8 24.74 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.mlock
0.91 ± 2% +23.8 24.73 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.mlock
0.88 ± 2% +23.8 24.72 perf-profile.calltrace.cycles-pp.__x64_sys_mlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.mlock
0.87 ± 2% +23.8 24.71 perf-profile.calltrace.cycles-pp.do_mlock.__x64_sys_mlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.mlock
0.00 +23.9 23.86 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.mlock_pte_range
0.00 +23.9 23.87 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.mlock_pte_range
0.00 +23.9 23.92 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.mlock_pte_range.walk_p4d_range
0.00 +23.9 23.92 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.mlock_pte_range.walk_p4d_range
0.00 +24.0 23.96 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.munlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range
0.00 +24.0 23.97 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.mlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range
0.54 +24.1 24.63 perf-profile.calltrace.cycles-pp.munlock
0.00 +24.2 24.22 perf-profile.calltrace.cycles-pp.mlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range.walk_page_range
0.00 +24.3 24.28 perf-profile.calltrace.cycles-pp.munlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range.walk_page_range
0.00 +24.3 24.33 perf-profile.calltrace.cycles-pp.__walk_page_range.walk_page_range.mlock_fixup.apply_vma_lock_flags.do_mlock
0.00 +24.3 24.35 perf-profile.calltrace.cycles-pp.walk_page_range.mlock_fixup.apply_vma_lock_flags.do_mlock.__x64_sys_mlock
0.00 +24.4 24.36 perf-profile.calltrace.cycles-pp.__walk_page_range.walk_page_range.mlock_fixup.apply_vma_lock_flags.__x64_sys_munlock
0.00 +24.4 24.38 perf-profile.calltrace.cycles-pp.walk_page_range.mlock_fixup.apply_vma_lock_flags.__x64_sys_munlock.do_syscall_64
0.00 +24.5 24.48 perf-profile.calltrace.cycles-pp.mlock_fixup.apply_vma_lock_flags.__x64_sys_munlock.do_syscall_64.entry_SYSCALL_64_after_hwframe
0.00 +24.5 24.48 perf-profile.calltrace.cycles-pp.mlock_fixup.apply_vma_lock_flags.do_mlock.__x64_sys_mlock.do_syscall_64
0.00 +24.5 24.50 perf-profile.calltrace.cycles-pp.apply_vma_lock_flags.__x64_sys_munlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.munlock
0.00 +24.5 24.53 perf-profile.calltrace.cycles-pp.apply_vma_lock_flags.do_mlock.__x64_sys_mlock.do_syscall_64.entry_SYSCALL_64_after_hwframe
0.00 +24.6 24.56 perf-profile.calltrace.cycles-pp.__x64_sys_munlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.munlock
0.00 +24.6 24.58 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.munlock
0.00 +24.6 24.58 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.munlock
0.00 +48.6 48.62 perf-profile.calltrace.cycles-pp.mlock_pte_range.walk_p4d_range.__walk_page_range.walk_page_range.mlock_fixup
0.00 +48.7 48.68 perf-profile.calltrace.cycles-pp.walk_p4d_range.__walk_page_range.walk_page_range.mlock_fixup.apply_vma_lock_flags
98.34 -47.8 50.51 perf-profile.children.cycles-pp.remap_file_pages
98.04 -47.6 50.41 perf-profile.children.cycles-pp.__x64_sys_remap_file_pages
50.18 -24.4 25.79 perf-profile.children.cycles-pp.do_mmap
50.03 -24.3 25.73 perf-profile.children.cycles-pp.mmap_region
48.04 -23.4 24.68 perf-profile.children.cycles-pp.__mm_populate
48.47 -23.3 25.17 perf-profile.children.cycles-pp.__do_munmap
47.76 -23.2 24.58 perf-profile.children.cycles-pp.populate_vma_page_range
47.74 -23.2 24.57 perf-profile.children.cycles-pp.__get_user_pages
47.81 -22.9 24.93 perf-profile.children.cycles-pp.unmap_region
47.14 -22.8 24.36 perf-profile.children.cycles-pp.handle_mm_fault
47.06 -22.7 24.34 perf-profile.children.cycles-pp.__handle_mm_fault
46.98 -22.7 24.31 perf-profile.children.cycles-pp.do_fault
46.96 -22.7 24.30 perf-profile.children.cycles-pp.filemap_map_pages
46.57 -22.4 24.13 perf-profile.children.cycles-pp.do_set_pte
46.92 -22.3 24.58 perf-profile.children.cycles-pp.unmap_vmas
46.85 -22.3 24.56 perf-profile.children.cycles-pp.unmap_page_range
46.74 -22.2 24.52 perf-profile.children.cycles-pp.zap_pte_range
0.60 -0.4 0.23 ± 4% perf-profile.children.cycles-pp.tlb_finish_mmu
0.57 -0.3 0.22 ± 4% perf-profile.children.cycles-pp.tlb_flush_mmu
0.45 ± 2% -0.3 0.16 ± 5% perf-profile.children.cycles-pp.perf_event_mmap
0.38 ± 2% -0.2 0.14 ± 6% perf-profile.children.cycles-pp.vma_link
0.38 ± 2% -0.2 0.14 ± 4% perf-profile.children.cycles-pp.flush_tlb_mm_range
0.37 -0.2 0.16 ± 4% perf-profile.children.cycles-pp.find_vma
0.31 ± 3% -0.2 0.11 ± 3% perf-profile.children.cycles-pp.__vma_adjust
0.29 ± 2% -0.2 0.10 ± 3% perf-profile.children.cycles-pp.__split_vma
0.30 ± 2% -0.2 0.11 ± 6% perf-profile.children.cycles-pp.flush_tlb_func
0.28 ± 2% -0.2 0.10 ± 4% perf-profile.children.cycles-pp.kmem_cache_alloc
0.28 ± 2% -0.2 0.10 ± 5% perf-profile.children.cycles-pp.remove_vma
0.26 ± 2% -0.2 0.10 ± 6% perf-profile.children.cycles-pp.native_flush_tlb_one_user
0.25 -0.2 0.09 ± 5% perf-profile.children.cycles-pp.vm_area_alloc
0.22 -0.1 0.08 ± 4% perf-profile.children.cycles-pp.vma_merge
0.20 ± 2% -0.1 0.06 perf-profile.children.cycles-pp.__mod_lruvec_page_state
0.22 ± 3% -0.1 0.08 ± 4% perf-profile.children.cycles-pp.vma_interval_tree_insert
0.19 ± 2% -0.1 0.06 perf-profile.children.cycles-pp.follow_page_pte
0.18 ± 4% -0.1 0.05 perf-profile.children.cycles-pp.page_remove_rmap
0.19 ± 2% -0.1 0.07 ± 6% perf-profile.children.cycles-pp.free_pgtables
0.18 ± 3% -0.1 0.07 ± 7% perf-profile.children.cycles-pp.syscall_return_via_sysret
0.21 ± 3% -0.1 0.10 ± 5% perf-profile.children.cycles-pp.__might_resched
0.17 ± 3% -0.1 0.06 ± 9% perf-profile.children.cycles-pp.kmem_cache_free
0.18 ± 2% -0.1 0.07 ± 5% perf-profile.children.cycles-pp.sync_mm_rss
0.17 ± 2% -0.1 0.06 perf-profile.children.cycles-pp.__entry_text_start
0.15 ± 3% -0.1 0.04 ± 44% perf-profile.children.cycles-pp.page_add_file_rmap
0.16 ± 3% -0.1 0.06 perf-profile.children.cycles-pp.__cond_resched
0.12 -0.1 0.02 ± 99% perf-profile.children.cycles-pp.follow_page_mask
0.15 ± 2% -0.1 0.06 ± 8% perf-profile.children.cycles-pp.unlink_file_vma
0.14 ± 3% -0.1 0.05 ± 7% perf-profile.children.cycles-pp.perf_iterate_sb
0.14 ± 3% -0.1 0.05 perf-profile.children.cycles-pp.down_write_killable
0.12 ± 3% -0.1 0.05 perf-profile.children.cycles-pp.folio_unlock
0.12 ± 3% -0.1 0.06 ± 9% perf-profile.children.cycles-pp.vmacache_find
0.12 ± 3% -0.1 0.06 perf-profile.children.cycles-pp._raw_spin_lock
0.12 ± 3% -0.0 0.07 ± 5% perf-profile.children.cycles-pp.next_uptodate_page
0.14 -0.0 0.12 ± 9% perf-profile.children.cycles-pp.sysvec_apic_timer_interrupt
0.12 ± 4% -0.0 0.11 ± 10% perf-profile.children.cycles-pp.__sysvec_apic_timer_interrupt
0.12 ± 4% -0.0 0.11 ± 10% perf-profile.children.cycles-pp.hrtimer_interrupt
0.07 ± 5% -0.0 0.05 ± 7% perf-profile.children.cycles-pp.__mod_lruvec_state
0.12 ± 3% -0.0 0.10 ± 3% perf-profile.children.cycles-pp.up_write
0.07 +0.0 0.10 ± 4% perf-profile.children.cycles-pp.__list_add_valid
0.14 ± 4% +0.1 0.20 ± 7% perf-profile.children.cycles-pp.mem_cgroup_update_lru_size
0.00 +0.1 0.10 ± 5% perf-profile.children.cycles-pp.__list_del_entry_valid
99.53 +0.3 99.81 perf-profile.children.cycles-pp.entry_SYSCALL_64_after_hwframe
99.44 +0.3 99.78 perf-profile.children.cycles-pp.do_syscall_64
46.40 +1.9 48.30 perf-profile.children.cycles-pp.mlock_page
46.21 +2.4 48.62 perf-profile.children.cycles-pp.munlock_page
91.65 +4.1 95.75 perf-profile.children.cycles-pp.folio_lruvec_lock_irq
91.44 +4.2 95.60 perf-profile.children.cycles-pp._raw_spin_lock_irq
91.09 +4.3 95.38 perf-profile.children.cycles-pp.native_queued_spin_lock_slowpath
1.09 ± 2% +23.7 24.80 perf-profile.children.cycles-pp.mlock
0.88 ± 2% +23.8 24.71 perf-profile.children.cycles-pp.do_mlock
0.88 ± 2% +23.8 24.72 perf-profile.children.cycles-pp.__x64_sys_mlock
0.58 ± 2% +24.1 24.64 perf-profile.children.cycles-pp.munlock
0.36 ± 2% +24.2 24.56 perf-profile.children.cycles-pp.__x64_sys_munlock
0.74 ± 2% +48.3 49.04 perf-profile.children.cycles-pp.apply_vma_lock_flags
0.59 ± 2% +48.4 48.98 perf-profile.children.cycles-pp.mlock_fixup
0.00 +48.6 48.62 perf-profile.children.cycles-pp.mlock_pte_range
0.00 +48.7 48.68 perf-profile.children.cycles-pp.walk_p4d_range
0.00 +48.7 48.70 perf-profile.children.cycles-pp.__walk_page_range
0.00 +48.7 48.74 perf-profile.children.cycles-pp.walk_page_range
0.32 ± 2% -0.2 0.12 ± 5% perf-profile.self.cycles-pp.mmap_region
0.26 ± 2% -0.2 0.10 ± 8% perf-profile.self.cycles-pp.native_flush_tlb_one_user
0.24 ± 2% -0.1 0.10 ± 6% perf-profile.self.cycles-pp.find_vma
0.21 ± 3% -0.1 0.08 ± 4% perf-profile.self.cycles-pp.vma_interval_tree_insert
0.37 ± 2% -0.1 0.24 ± 6% perf-profile.self.cycles-pp._raw_spin_lock_irq
0.18 ± 2% -0.1 0.07 ± 7% perf-profile.self.cycles-pp.syscall_return_via_sysret
0.18 ± 3% -0.1 0.07 ± 5% perf-profile.self.cycles-pp.sync_mm_rss
0.19 ± 3% -0.1 0.09 ± 5% perf-profile.self.cycles-pp.__might_resched
0.12 ± 4% -0.1 0.02 ± 99% perf-profile.self.cycles-pp.__do_munmap
0.12 ± 3% -0.1 0.05 perf-profile.self.cycles-pp.folio_unlock
0.10 ± 3% -0.1 0.03 ± 70% perf-profile.self.cycles-pp.vmacache_find
0.22 ± 4% -0.1 0.15 ± 2% perf-profile.self.cycles-pp.folio_lruvec_lock_irq
0.11 ± 3% -0.1 0.06 ± 6% perf-profile.self.cycles-pp._raw_spin_lock
0.12 ± 3% -0.1 0.07 ± 7% perf-profile.self.cycles-pp.next_uptodate_page
0.24 ± 3% -0.0 0.21 ± 5% perf-profile.self.cycles-pp.mlock_page
0.07 +0.0 0.10 ± 4% perf-profile.self.cycles-pp.__list_add_valid
0.00 +0.1 0.05 perf-profile.self.cycles-pp.walk_p4d_range
0.00 +0.1 0.05 ± 8% perf-profile.self.cycles-pp.mlock_pte_range
0.19 ± 2% +0.1 0.25 ± 6% perf-profile.self.cycles-pp.munlock_page
0.14 ± 4% +0.1 0.20 ± 7% perf-profile.self.cycles-pp.mem_cgroup_update_lru_size
0.00 +0.1 0.10 ± 7% perf-profile.self.cycles-pp.__list_del_entry_valid
91.08 +4.3 95.38 perf-profile.self.cycles-pp.native_queued_spin_lock_slowpath
Disclaimer:
Results have been estimated based on internal Intel analysis and are provided
for informational purposes only. Any difference in system hardware or software
design or configuration may affect actual performance.
---
0DAY/LKP+ Test Infrastructure Open Source Technology Center
https://lists.01.org/hyperkitty/list/lkp@lists.01.org Intel Corporation
Thanks,
Oliver Sang
[-- Attachment #2: config-5.17.0-rc2-00015-g237b4454014d --]
[-- Type: text/plain, Size: 174672 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.17.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-22) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23502
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23502
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_PERF_EVENTS_AMD_UNCORE=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_PRMT=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_XEN is not set
CONFIG_KVM_MMU_AUDIT=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_FC_APPID is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_MTKSDIO is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_INTEL_MEI_PXP is not set
CONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_HYPERV_STORAGE=m
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
CONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_MICROSOFT_MANA is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_PRESTERA is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWLMEI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not set
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=m
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_WMI_EC is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
CONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_IR_TOY is not set
#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# end of Video4Linux options
#
# Media controller options
#
# CONFIG_MEDIA_CONTROLLER_DVB is not set
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set
#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5693 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# end of Camera sensor devices
#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices
#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
# end of SPI helper chips
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_CXD2880=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_MXL692=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
# CONFIG_DRM_I915_GVT_KVMGT is not set
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_HYPERV is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_PRIVACY_SCREEN=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_STUSB160X is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
# CONFIG_AMD_PMC is not set
# CONFIG_ADV_SWBUTTON is not set
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_MERAKI_MX100 is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
# CONFIG_WIRELESS_HOTKEY is not set
CONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_SAR_INT1092 is not set
CONFIG_INTEL_PMC_CORE=m
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_WMI=y
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_INTEL_ISHTP_ECLITE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# CONFIG_INTEL_VSEC is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not set
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
# CONFIG_VIRTIO_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_DWC is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_DTPM is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4=m
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM4=m
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# end of Library routines
CONFIG_ASN1_ENCODER=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
[-- Attachment #3: job-script --]
[-- Type: text/plain, Size: 8191 bytes --]
#!/bin/sh
export_top_env()
{
export suite='stress-ng'
export testcase='stress-ng'
export category='benchmark'
export nr_threads=128
export testtime=60
export job_origin='stress-ng-class-memory.yaml'
export queue_cmdline_keys='branch
commit'
export queue='validate'
export testbox='lkp-icl-2sp6'
export tbox_group='lkp-icl-2sp6'
export kconfig='x86_64-rhel-8.3'
export submit_id='620e7d088eb8ae50a8db9695'
export job_file='/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220218-20648-cts3pb-5.yaml'
export id='b77cd01d9fd42ed946f29ebc423f1989b8a91865'
export queuer_version='/lkp-src'
export model='Ice Lake'
export nr_node=2
export nr_cpu=128
export memory='128G'
export nr_ssd_partitions=3
export nr_hdd_partitions=6
export hdd_partitions='/dev/disk/by-id/ata-WDC_WD20SPZX-08UA7_WD-WXE2EA06X8DA-part*'
export ssd_partitions='/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204002V800RGN-part*'
export rootfs_partition='/dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV634503K8400NGN-part1'
export kernel_cmdline_hw='acpi_rsdp=0x69ffd014'
export brand='Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz'
export need_kconfig=
export commit='237b4454014d3759acc6459eb329c5e3d55113ed'
export ucode='0xd000280'
export bisect_dmesg=true
export enqueue_time='2022-02-18 00:51:21 +0800'
export _id='620e7d228eb8ae50a8db9697'
export _rt='/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed'
export user='lkp'
export compiler='gcc-9'
export LKP_SERVER='internal-lkp-server'
export head_commit='4e080c03d517d19fc72f886e65be8bbcbf0eed7b'
export base_commit='754e0b0e35608ed5206d6a67a791563c631cec07'
export branch='linux-review/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421'
export rootfs='debian-10.4-x86_64-20200603.cgz'
export result_root='/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/3'
export scheduler_version='/lkp/lkp/.src-20220217-223842'
export arch='x86_64'
export max_uptime=2100
export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/3
BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d
branch=linux-review/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
job=/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220218-20648-cts3pb-5.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-rhel-8.3
commit=237b4454014d3759acc6459eb329c5e3d55113ed
acpi_rsdp=0x69ffd014
max_uptime=2100
LKP_SERVER=internal-lkp-server
nokaslr
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
export modules_initrd='/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/modules.cgz'
export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20220105.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/stress-ng_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/stress-ng-x86_64-0.11-06_20220214.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/mpstat_20200714.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/turbostat_20200721.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/turbostat-x86_64-3.7-4_20200721.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/perf_20220212.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/perf-x86_64-754e0b0e3560-1_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/sar-x86_64-34c92ae-1_20200702.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz'
export ucode_initrd='/osimage/ucode/intel-ucode-20210222.cgz'
export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export last_kernel='5.17.0-rc4'
export repeat_to=6
export schedule_notify_address=
export kernel='/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d'
export dequeue_time='2022-02-18 00:57:20 +0800'
export job_state='downgrade_ucode'
export job_initrd='/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220218-20648-cts3pb-5.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_setup $LKP_SRC/setup/cpufreq_governor 'performance'
run_monitor ignored=1 $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
run_monitor $LKP_SRC/monitors/wrapper uptime
run_monitor $LKP_SRC/monitors/wrapper iostat
run_monitor $LKP_SRC/monitors/wrapper heartbeat
run_monitor $LKP_SRC/monitors/wrapper vmstat
run_monitor $LKP_SRC/monitors/wrapper numa-numastat
run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
run_monitor $LKP_SRC/monitors/wrapper proc-stat
run_monitor $LKP_SRC/monitors/wrapper meminfo
run_monitor $LKP_SRC/monitors/wrapper slabinfo
run_monitor $LKP_SRC/monitors/wrapper interrupts
run_monitor $LKP_SRC/monitors/wrapper lock_stat
run_monitor lite_mode=1 $LKP_SRC/monitors/wrapper perf-sched
run_monitor $LKP_SRC/monitors/wrapper softirqs
run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
run_monitor $LKP_SRC/monitors/wrapper diskstats
run_monitor $LKP_SRC/monitors/wrapper nfsstat
run_monitor $LKP_SRC/monitors/wrapper cpuidle
run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
run_monitor $LKP_SRC/monitors/wrapper turbostat
run_monitor $LKP_SRC/monitors/wrapper sched_debug
run_monitor $LKP_SRC/monitors/wrapper perf-stat
run_monitor $LKP_SRC/monitors/wrapper mpstat
run_monitor debug_mode=0 $LKP_SRC/monitors/no-stdout/wrapper perf-profile
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test class='memory' test='remap' $LKP_SRC/tests/wrapper stress-ng
}
extract_stats()
{
export stats_part_begin=
export stats_part_end=
env class='memory' test='remap' $LKP_SRC/stats/wrapper stress-ng
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper boot-time
$LKP_SRC/stats/wrapper uptime
$LKP_SRC/stats/wrapper iostat
$LKP_SRC/stats/wrapper vmstat
$LKP_SRC/stats/wrapper numa-numastat
$LKP_SRC/stats/wrapper numa-vmstat
$LKP_SRC/stats/wrapper numa-meminfo
$LKP_SRC/stats/wrapper proc-vmstat
$LKP_SRC/stats/wrapper meminfo
$LKP_SRC/stats/wrapper slabinfo
$LKP_SRC/stats/wrapper interrupts
$LKP_SRC/stats/wrapper lock_stat
env lite_mode=1 $LKP_SRC/stats/wrapper perf-sched
$LKP_SRC/stats/wrapper softirqs
$LKP_SRC/stats/wrapper diskstats
$LKP_SRC/stats/wrapper nfsstat
$LKP_SRC/stats/wrapper cpuidle
$LKP_SRC/stats/wrapper turbostat
$LKP_SRC/stats/wrapper sched_debug
$LKP_SRC/stats/wrapper perf-stat
$LKP_SRC/stats/wrapper mpstat
env debug_mode=0 $LKP_SRC/stats/wrapper perf-profile
$LKP_SRC/stats/wrapper time stress-ng.time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper last_state
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper time
}
"$@"
[-- Attachment #4: job.yaml --]
[-- Type: text/plain, Size: 5504 bytes --]
---
:#! jobs/stress-ng-class-memory.yaml:
suite: stress-ng
testcase: stress-ng
category: benchmark
nr_threads: 100%
testtime: 60s
oom-killer:
ignored: 1
stress-ng:
class: memory
test: remap
job_origin: stress-ng-class-memory.yaml
:#! queue options:
queue_cmdline_keys:
- branch
- commit
queue: bisect
testbox: lkp-icl-2sp6
tbox_group: lkp-icl-2sp6
kconfig: x86_64-rhel-8.3
submit_id: 620e35e68eb8ae2756b1c0e4
job_file: "/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220217-10070-15jk18c-2.yaml"
id: 51b4c9866b2eaa9835471bf94377a7ebf565c17c
queuer_version: "/lkp-src"
:#! hosts/lkp-icl-2sp6:
model: Ice Lake
nr_node: 2
nr_cpu: 128
memory: 128G
nr_ssd_partitions: 3
nr_hdd_partitions: 6
hdd_partitions: "/dev/disk/by-id/ata-WDC_WD20SPZX-08UA7_WD-WXE2EA06X8DA-part*"
ssd_partitions: "/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204002V800RGN-part*"
rootfs_partition: "/dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV634503K8400NGN-part1"
kernel_cmdline_hw: acpi_rsdp=0x69ffd014
brand: Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz
:#! include/category/benchmark:
kmsg:
boot-time:
uptime:
iostat:
heartbeat:
vmstat:
numa-numastat:
numa-vmstat:
numa-meminfo:
proc-vmstat:
proc-stat:
meminfo:
slabinfo:
interrupts:
lock_stat:
perf-sched:
lite_mode: 1
softirqs:
bdi_dev_mapping:
diskstats:
nfsstat:
cpuidle:
cpufreq-stats:
turbostat:
sched_debug:
perf-stat:
mpstat:
perf-profile:
debug_mode: 0
:#! include/category/ALL:
cpufreq_governor: performance
:#! include/stress-ng:
need_kconfig:
:#! include/queue/cyclic:
commit: 237b4454014d3759acc6459eb329c5e3d55113ed
:#! include/testbox/lkp-icl-2sp6:
ucode: '0xd000280'
bisect_dmesg: true
enqueue_time: 2022-02-17 19:47:50.818356313 +08:00
_id: 620e3b6c8eb8ae2756b1c0e6
_rt: "/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed"
:#! schedule options:
user: lkp
compiler: gcc-9
LKP_SERVER: internal-lkp-server
head_commit: 4e080c03d517d19fc72f886e65be8bbcbf0eed7b
base_commit: 754e0b0e35608ed5206d6a67a791563c631cec07
branch: linux-devel/devel-hourly-20220215-215339
rootfs: debian-10.4-x86_64-20200603.cgz
result_root: "/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/0"
scheduler_version: "/lkp/lkp/.src-20220217-171907"
arch: x86_64
max_uptime: 2100
initrd: "/osimage/debian/debian-10.4-x86_64-20200603.cgz"
bootloader_append:
- root=/dev/ram0
- RESULT_ROOT=/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/0
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d
- branch=linux-devel/devel-hourly-20220215-215339
- job=/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220217-10070-15jk18c-2.yaml
- user=lkp
- ARCH=x86_64
- kconfig=x86_64-rhel-8.3
- commit=237b4454014d3759acc6459eb329c5e3d55113ed
- acpi_rsdp=0x69ffd014
- max_uptime=2100
- LKP_SERVER=internal-lkp-server
- nokaslr
- selinux=0
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- console=tty0
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- vga=normal
- rw
modules_initrd: "/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/modules.cgz"
bm_initrd: "/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20220105.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/stress-ng_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/stress-ng-x86_64-0.11-06_20220214.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/mpstat_20200714.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/turbostat_20200721.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/turbostat-x86_64-3.7-4_20200721.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/perf_20220212.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/perf-x86_64-754e0b0e3560-1_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/sar-x86_64-34c92ae-1_20200702.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz"
ucode_initrd: "/osimage/ucode/intel-ucode-20210222.cgz"
lkp_initrd: "/osimage/user/lkp/lkp-x86_64.cgz"
site: inn
:#! /cephfs/db/releases/20220214184054/lkp-src/include/site/inn:
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
watchdog:
:#! runtime status:
last_kernel: 5.9.0-2-amd64
repeat_to: 3
schedule_notify_address:
:#! user overrides:
kernel: "/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d"
dequeue_time: 2022-02-17 20:16:56.271187361 +08:00
:#! /cephfs/db/releases/20220217171601/lkp-src/include/site/inn:
job_state: finished
loadavg: 51.42 22.96 8.54 1/1158 9664
start_time: '1645100299'
end_time: '1645100361'
version: "/lkp/lkp/.src-20220217-171949:848a26a9:499352d36"
[-- Attachment #5: reproduce --]
[-- Type: text/plain, Size: 338 bytes --]
for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
online_file="$cpu_dir"/online
[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue
file="$cpu_dir"/cpufreq/scaling_governor
[ -f "$file" ] && echo "performance" > "$file"
done
"stress-ng" "--timeout" "60" "--times" "--verify" "--metrics-brief" "--remap" "128"
^ permalink raw reply [flat|nested] 29+ messages in thread* [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
@ 2022-02-18 6:35 ` kernel test robot
0 siblings, 0 replies; 29+ messages in thread
From: kernel test robot @ 2022-02-18 6:35 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 25069 bytes --]
Greeting,
FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb(a)google.com
in testcase: stress-ng
on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
with following parameters:
nr_threads: 100%
testtime: 60s
class: memory
test: remap
cpufreq_governor: performance
ucode: 0xd000280
If you fix the issue, kindly add following tag
Reported-by: kernel test robot <oliver.sang@intel.com>
Details are as below:
-------------------------------------------------------------------------------------------------->
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
sudo bin/lkp install job.yaml # job file is attached in this email
bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
sudo bin/lkp run generated-yaml-file
# if come across any failure that blocks the test,
# please remove ~/.lkp and /lkp dir to run from a clean state.
=========================================================================================
class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
commit:
c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
c479426e09c8088d 237b4454014d3759acc6459eb32
---------------- ---------------------------
%stddev %change %stddev
\ | \
109459 -62.5% 41003 ± 2% stress-ng.remap.ops
1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
0.48 -0.2 0.26 ± 2% mpstat.cpu.all.usr%
439776 +35.9% 597819 meminfo.Inactive
439776 +35.9% 597819 meminfo.Inactive(anon)
157638 -99.8% 247.00 meminfo.Mlocked
289539 ± 17% +30.0% 376365 ± 5% numa-meminfo.node0.Inactive
289539 ± 17% +30.0% 376365 ± 5% numa-meminfo.node0.Inactive(anon)
77981 -99.8% 126.50 numa-meminfo.node0.Mlocked
79990 ± 2% -99.9% 119.50 numa-meminfo.node1.Mlocked
72605 ± 17% +29.8% 94255 ± 5% numa-vmstat.node0.nr_inactive_anon
19407 -99.8% 31.50 ± 2% numa-vmstat.node0.nr_mlock
72603 ± 17% +29.8% 94255 ± 5% numa-vmstat.node0.nr_zone_inactive_anon
20066 ± 2% -99.9% 29.50 numa-vmstat.node1.nr_mlock
110126 +35.6% 149376 proc-vmstat.nr_inactive_anon
61898 +1.2% 62642 proc-vmstat.nr_mapped
39411 -99.8% 61.33 proc-vmstat.nr_mlock
661395 -5.9% 622058 proc-vmstat.nr_unevictable
110126 +35.6% 149376 proc-vmstat.nr_zone_inactive_anon
661395 -5.9% 622058 proc-vmstat.nr_zone_unevictable
1039724 -17.6% 856602 proc-vmstat.numa_hit
928057 -20.2% 740906 proc-vmstat.numa_local
1039735 -17.7% 855482 proc-vmstat.pgalloc_normal
2.247e+08 -62.4% 84468472 ± 2% proc-vmstat.pgfault
802397 ± 4% -26.1% 593350 ± 7% proc-vmstat.pgfree
55865 ± 38% -100.0% 0.00 proc-vmstat.unevictable_pgs_cleared
1.121e+08 +49.8% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_culled
1.121e+08 +49.8% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_mlocked
1.12e+08 +49.9% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_munlocked
1.12e+08 +49.9% 1.678e+08 ± 2% proc-vmstat.unevictable_pgs_rescued
3.06 ± 11% +33.6% 4.09 ± 9% perf-stat.i.MPKI
1.555e+10 -29.1% 1.102e+10 perf-stat.i.branch-instructions
0.63 ± 3% -0.2 0.47 ± 4% perf-stat.i.branch-miss-rate%
86979814 -49.4% 44006612 ± 2% perf-stat.i.branch-misses
5.57 +45.0% 8.08 perf-stat.i.cpi
0.03 ± 8% -0.0 0.02 ± 12% perf-stat.i.dTLB-load-miss-rate%
4465030 -50.5% 2211973 ± 3% perf-stat.i.dTLB-load-misses
1.882e+10 -32.8% 1.265e+10 perf-stat.i.dTLB-loads
6.515e+09 -52.5% 3.095e+09 ± 2% perf-stat.i.dTLB-stores
7.012e+10 -30.9% 4.842e+10 perf-stat.i.instructions
0.20 ± 2% -26.4% 0.15 ± 2% perf-stat.i.ipc
321.02 -34.4% 210.63 perf-stat.i.metric.M/sec
2061534 -57.3% 879696 ± 2% perf-stat.i.node-loads
531446 ± 7% -31.1% 366181 ± 21% perf-stat.i.node-stores
2.89 ± 9% +37.5% 3.97 ± 10% perf-stat.overall.MPKI
0.56 -0.2 0.40 ± 2% perf-stat.overall.branch-miss-rate%
5.71 +45.1% 8.28 perf-stat.overall.cpi
0.02 -0.0 0.02 ± 2% perf-stat.overall.dTLB-load-miss-rate%
0.00 ± 11% +0.0 0.00 ± 11% perf-stat.overall.dTLB-store-miss-rate%
0.18 -31.1% 0.12 perf-stat.overall.ipc
1.532e+10 -29.1% 1.086e+10 perf-stat.ps.branch-instructions
85628106 -49.4% 43291977 ± 2% perf-stat.ps.branch-misses
4429976 -49.9% 2220756 ± 3% perf-stat.ps.dTLB-load-misses
1.854e+10 -32.8% 1.246e+10 perf-stat.ps.dTLB-loads
6.417e+09 -52.5% 3.049e+09 ± 2% perf-stat.ps.dTLB-stores
6.906e+10 -31.0% 4.769e+10 perf-stat.ps.instructions
2037560 -57.2% 872256 ± 2% perf-stat.ps.node-loads
522322 ± 7% -31.0% 360168 ± 21% perf-stat.ps.node-stores
4.39e+12 -31.2% 3.021e+12 perf-stat.total.instructions
98.28 -47.8 50.50 perf-profile.calltrace.cycles-pp.remap_file_pages
98.14 -47.7 50.44 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.remap_file_pages
98.07 -47.6 50.42 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
98.03 -47.6 50.40 perf-profile.calltrace.cycles-pp.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
50.17 -24.4 25.79 perf-profile.calltrace.cycles-pp.do_mmap.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
50.01 -24.3 25.72 perf-profile.calltrace.cycles-pp.mmap_region.do_mmap.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe
48.46 -23.3 25.16 perf-profile.calltrace.cycles-pp.__do_munmap.mmap_region.do_mmap.__x64_sys_remap_file_pages.do_syscall_64
47.70 -23.1 24.56 perf-profile.calltrace.cycles-pp.__mm_populate.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe.remap_file_pages
47.52 -23.0 24.49 perf-profile.calltrace.cycles-pp.populate_vma_page_range.__mm_populate.__x64_sys_remap_file_pages.do_syscall_64.entry_SYSCALL_64_after_hwframe
47.50 -23.0 24.49 perf-profile.calltrace.cycles-pp.__get_user_pages.populate_vma_page_range.__mm_populate.__x64_sys_remap_file_pages.do_syscall_64
47.80 -22.9 24.92 perf-profile.calltrace.cycles-pp.unmap_region.__do_munmap.mmap_region.do_mmap.__x64_sys_remap_file_pages
47.14 -22.8 24.36 perf-profile.calltrace.cycles-pp.handle_mm_fault.__get_user_pages.populate_vma_page_range.__mm_populate.__x64_sys_remap_file_pages
47.06 -22.7 24.33 perf-profile.calltrace.cycles-pp.__handle_mm_fault.handle_mm_fault.__get_user_pages.populate_vma_page_range.__mm_populate
46.97 -22.7 24.30 perf-profile.calltrace.cycles-pp.do_fault.__handle_mm_fault.handle_mm_fault.__get_user_pages.populate_vma_page_range
46.94 -22.7 24.29 perf-profile.calltrace.cycles-pp.filemap_map_pages.do_fault.__handle_mm_fault.handle_mm_fault.__get_user_pages
46.56 -22.4 24.12 perf-profile.calltrace.cycles-pp.do_set_pte.filemap_map_pages.do_fault.__handle_mm_fault.handle_mm_fault
46.91 -22.3 24.58 perf-profile.calltrace.cycles-pp.unmap_vmas.unmap_region.__do_munmap.mmap_region.do_mmap
46.38 -22.3 24.06 perf-profile.calltrace.cycles-pp.mlock_page.do_set_pte.filemap_map_pages.do_fault.__handle_mm_fault
46.84 -22.3 24.55 perf-profile.calltrace.cycles-pp.unmap_page_range.unmap_vmas.unmap_region.__do_munmap.mmap_region
46.72 -22.2 24.51 perf-profile.calltrace.cycles-pp.zap_pte_range.unmap_page_range.unmap_vmas.unmap_region.__do_munmap
45.95 -22.1 23.82 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.mlock_page.do_set_pte.filemap_map_pages.do_fault
45.82 -22.0 23.78 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.do_set_pte.filemap_map_pages
45.64 -21.9 23.72 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.do_set_pte
46.18 -21.9 24.32 perf-profile.calltrace.cycles-pp.munlock_page.zap_pte_range.unmap_page_range.unmap_vmas.unmap_region
45.70 -21.7 24.00 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.munlock_page.zap_pte_range.unmap_page_range.unmap_vmas
45.61 -21.6 23.97 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.zap_pte_range.unmap_page_range
45.42 -21.5 23.91 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.zap_pte_range
1.05 ± 2% +23.7 24.78 perf-profile.calltrace.cycles-pp.mlock
0.93 ± 2% +23.8 24.74 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.mlock
0.91 ± 2% +23.8 24.73 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.mlock
0.88 ± 2% +23.8 24.72 perf-profile.calltrace.cycles-pp.__x64_sys_mlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.mlock
0.87 ± 2% +23.8 24.71 perf-profile.calltrace.cycles-pp.do_mlock.__x64_sys_mlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.mlock
0.00 +23.9 23.86 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.mlock_pte_range
0.00 +23.9 23.87 perf-profile.calltrace.cycles-pp.native_queued_spin_lock_slowpath._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.mlock_pte_range
0.00 +23.9 23.92 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.munlock_page.mlock_pte_range.walk_p4d_range
0.00 +23.9 23.92 perf-profile.calltrace.cycles-pp._raw_spin_lock_irq.folio_lruvec_lock_irq.mlock_page.mlock_pte_range.walk_p4d_range
0.00 +24.0 23.96 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.munlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range
0.00 +24.0 23.97 perf-profile.calltrace.cycles-pp.folio_lruvec_lock_irq.mlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range
0.54 +24.1 24.63 perf-profile.calltrace.cycles-pp.munlock
0.00 +24.2 24.22 perf-profile.calltrace.cycles-pp.mlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range.walk_page_range
0.00 +24.3 24.28 perf-profile.calltrace.cycles-pp.munlock_page.mlock_pte_range.walk_p4d_range.__walk_page_range.walk_page_range
0.00 +24.3 24.33 perf-profile.calltrace.cycles-pp.__walk_page_range.walk_page_range.mlock_fixup.apply_vma_lock_flags.do_mlock
0.00 +24.3 24.35 perf-profile.calltrace.cycles-pp.walk_page_range.mlock_fixup.apply_vma_lock_flags.do_mlock.__x64_sys_mlock
0.00 +24.4 24.36 perf-profile.calltrace.cycles-pp.__walk_page_range.walk_page_range.mlock_fixup.apply_vma_lock_flags.__x64_sys_munlock
0.00 +24.4 24.38 perf-profile.calltrace.cycles-pp.walk_page_range.mlock_fixup.apply_vma_lock_flags.__x64_sys_munlock.do_syscall_64
0.00 +24.5 24.48 perf-profile.calltrace.cycles-pp.mlock_fixup.apply_vma_lock_flags.__x64_sys_munlock.do_syscall_64.entry_SYSCALL_64_after_hwframe
0.00 +24.5 24.48 perf-profile.calltrace.cycles-pp.mlock_fixup.apply_vma_lock_flags.do_mlock.__x64_sys_mlock.do_syscall_64
0.00 +24.5 24.50 perf-profile.calltrace.cycles-pp.apply_vma_lock_flags.__x64_sys_munlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.munlock
0.00 +24.5 24.53 perf-profile.calltrace.cycles-pp.apply_vma_lock_flags.do_mlock.__x64_sys_mlock.do_syscall_64.entry_SYSCALL_64_after_hwframe
0.00 +24.6 24.56 perf-profile.calltrace.cycles-pp.__x64_sys_munlock.do_syscall_64.entry_SYSCALL_64_after_hwframe.munlock
0.00 +24.6 24.58 perf-profile.calltrace.cycles-pp.do_syscall_64.entry_SYSCALL_64_after_hwframe.munlock
0.00 +24.6 24.58 perf-profile.calltrace.cycles-pp.entry_SYSCALL_64_after_hwframe.munlock
0.00 +48.6 48.62 perf-profile.calltrace.cycles-pp.mlock_pte_range.walk_p4d_range.__walk_page_range.walk_page_range.mlock_fixup
0.00 +48.7 48.68 perf-profile.calltrace.cycles-pp.walk_p4d_range.__walk_page_range.walk_page_range.mlock_fixup.apply_vma_lock_flags
98.34 -47.8 50.51 perf-profile.children.cycles-pp.remap_file_pages
98.04 -47.6 50.41 perf-profile.children.cycles-pp.__x64_sys_remap_file_pages
50.18 -24.4 25.79 perf-profile.children.cycles-pp.do_mmap
50.03 -24.3 25.73 perf-profile.children.cycles-pp.mmap_region
48.04 -23.4 24.68 perf-profile.children.cycles-pp.__mm_populate
48.47 -23.3 25.17 perf-profile.children.cycles-pp.__do_munmap
47.76 -23.2 24.58 perf-profile.children.cycles-pp.populate_vma_page_range
47.74 -23.2 24.57 perf-profile.children.cycles-pp.__get_user_pages
47.81 -22.9 24.93 perf-profile.children.cycles-pp.unmap_region
47.14 -22.8 24.36 perf-profile.children.cycles-pp.handle_mm_fault
47.06 -22.7 24.34 perf-profile.children.cycles-pp.__handle_mm_fault
46.98 -22.7 24.31 perf-profile.children.cycles-pp.do_fault
46.96 -22.7 24.30 perf-profile.children.cycles-pp.filemap_map_pages
46.57 -22.4 24.13 perf-profile.children.cycles-pp.do_set_pte
46.92 -22.3 24.58 perf-profile.children.cycles-pp.unmap_vmas
46.85 -22.3 24.56 perf-profile.children.cycles-pp.unmap_page_range
46.74 -22.2 24.52 perf-profile.children.cycles-pp.zap_pte_range
0.60 -0.4 0.23 ± 4% perf-profile.children.cycles-pp.tlb_finish_mmu
0.57 -0.3 0.22 ± 4% perf-profile.children.cycles-pp.tlb_flush_mmu
0.45 ± 2% -0.3 0.16 ± 5% perf-profile.children.cycles-pp.perf_event_mmap
0.38 ± 2% -0.2 0.14 ± 6% perf-profile.children.cycles-pp.vma_link
0.38 ± 2% -0.2 0.14 ± 4% perf-profile.children.cycles-pp.flush_tlb_mm_range
0.37 -0.2 0.16 ± 4% perf-profile.children.cycles-pp.find_vma
0.31 ± 3% -0.2 0.11 ± 3% perf-profile.children.cycles-pp.__vma_adjust
0.29 ± 2% -0.2 0.10 ± 3% perf-profile.children.cycles-pp.__split_vma
0.30 ± 2% -0.2 0.11 ± 6% perf-profile.children.cycles-pp.flush_tlb_func
0.28 ± 2% -0.2 0.10 ± 4% perf-profile.children.cycles-pp.kmem_cache_alloc
0.28 ± 2% -0.2 0.10 ± 5% perf-profile.children.cycles-pp.remove_vma
0.26 ± 2% -0.2 0.10 ± 6% perf-profile.children.cycles-pp.native_flush_tlb_one_user
0.25 -0.2 0.09 ± 5% perf-profile.children.cycles-pp.vm_area_alloc
0.22 -0.1 0.08 ± 4% perf-profile.children.cycles-pp.vma_merge
0.20 ± 2% -0.1 0.06 perf-profile.children.cycles-pp.__mod_lruvec_page_state
0.22 ± 3% -0.1 0.08 ± 4% perf-profile.children.cycles-pp.vma_interval_tree_insert
0.19 ± 2% -0.1 0.06 perf-profile.children.cycles-pp.follow_page_pte
0.18 ± 4% -0.1 0.05 perf-profile.children.cycles-pp.page_remove_rmap
0.19 ± 2% -0.1 0.07 ± 6% perf-profile.children.cycles-pp.free_pgtables
0.18 ± 3% -0.1 0.07 ± 7% perf-profile.children.cycles-pp.syscall_return_via_sysret
0.21 ± 3% -0.1 0.10 ± 5% perf-profile.children.cycles-pp.__might_resched
0.17 ± 3% -0.1 0.06 ± 9% perf-profile.children.cycles-pp.kmem_cache_free
0.18 ± 2% -0.1 0.07 ± 5% perf-profile.children.cycles-pp.sync_mm_rss
0.17 ± 2% -0.1 0.06 perf-profile.children.cycles-pp.__entry_text_start
0.15 ± 3% -0.1 0.04 ± 44% perf-profile.children.cycles-pp.page_add_file_rmap
0.16 ± 3% -0.1 0.06 perf-profile.children.cycles-pp.__cond_resched
0.12 -0.1 0.02 ± 99% perf-profile.children.cycles-pp.follow_page_mask
0.15 ± 2% -0.1 0.06 ± 8% perf-profile.children.cycles-pp.unlink_file_vma
0.14 ± 3% -0.1 0.05 ± 7% perf-profile.children.cycles-pp.perf_iterate_sb
0.14 ± 3% -0.1 0.05 perf-profile.children.cycles-pp.down_write_killable
0.12 ± 3% -0.1 0.05 perf-profile.children.cycles-pp.folio_unlock
0.12 ± 3% -0.1 0.06 ± 9% perf-profile.children.cycles-pp.vmacache_find
0.12 ± 3% -0.1 0.06 perf-profile.children.cycles-pp._raw_spin_lock
0.12 ± 3% -0.0 0.07 ± 5% perf-profile.children.cycles-pp.next_uptodate_page
0.14 -0.0 0.12 ± 9% perf-profile.children.cycles-pp.sysvec_apic_timer_interrupt
0.12 ± 4% -0.0 0.11 ± 10% perf-profile.children.cycles-pp.__sysvec_apic_timer_interrupt
0.12 ± 4% -0.0 0.11 ± 10% perf-profile.children.cycles-pp.hrtimer_interrupt
0.07 ± 5% -0.0 0.05 ± 7% perf-profile.children.cycles-pp.__mod_lruvec_state
0.12 ± 3% -0.0 0.10 ± 3% perf-profile.children.cycles-pp.up_write
0.07 +0.0 0.10 ± 4% perf-profile.children.cycles-pp.__list_add_valid
0.14 ± 4% +0.1 0.20 ± 7% perf-profile.children.cycles-pp.mem_cgroup_update_lru_size
0.00 +0.1 0.10 ± 5% perf-profile.children.cycles-pp.__list_del_entry_valid
99.53 +0.3 99.81 perf-profile.children.cycles-pp.entry_SYSCALL_64_after_hwframe
99.44 +0.3 99.78 perf-profile.children.cycles-pp.do_syscall_64
46.40 +1.9 48.30 perf-profile.children.cycles-pp.mlock_page
46.21 +2.4 48.62 perf-profile.children.cycles-pp.munlock_page
91.65 +4.1 95.75 perf-profile.children.cycles-pp.folio_lruvec_lock_irq
91.44 +4.2 95.60 perf-profile.children.cycles-pp._raw_spin_lock_irq
91.09 +4.3 95.38 perf-profile.children.cycles-pp.native_queued_spin_lock_slowpath
1.09 ± 2% +23.7 24.80 perf-profile.children.cycles-pp.mlock
0.88 ± 2% +23.8 24.71 perf-profile.children.cycles-pp.do_mlock
0.88 ± 2% +23.8 24.72 perf-profile.children.cycles-pp.__x64_sys_mlock
0.58 ± 2% +24.1 24.64 perf-profile.children.cycles-pp.munlock
0.36 ± 2% +24.2 24.56 perf-profile.children.cycles-pp.__x64_sys_munlock
0.74 ± 2% +48.3 49.04 perf-profile.children.cycles-pp.apply_vma_lock_flags
0.59 ± 2% +48.4 48.98 perf-profile.children.cycles-pp.mlock_fixup
0.00 +48.6 48.62 perf-profile.children.cycles-pp.mlock_pte_range
0.00 +48.7 48.68 perf-profile.children.cycles-pp.walk_p4d_range
0.00 +48.7 48.70 perf-profile.children.cycles-pp.__walk_page_range
0.00 +48.7 48.74 perf-profile.children.cycles-pp.walk_page_range
0.32 ± 2% -0.2 0.12 ± 5% perf-profile.self.cycles-pp.mmap_region
0.26 ± 2% -0.2 0.10 ± 8% perf-profile.self.cycles-pp.native_flush_tlb_one_user
0.24 ± 2% -0.1 0.10 ± 6% perf-profile.self.cycles-pp.find_vma
0.21 ± 3% -0.1 0.08 ± 4% perf-profile.self.cycles-pp.vma_interval_tree_insert
0.37 ± 2% -0.1 0.24 ± 6% perf-profile.self.cycles-pp._raw_spin_lock_irq
0.18 ± 2% -0.1 0.07 ± 7% perf-profile.self.cycles-pp.syscall_return_via_sysret
0.18 ± 3% -0.1 0.07 ± 5% perf-profile.self.cycles-pp.sync_mm_rss
0.19 ± 3% -0.1 0.09 ± 5% perf-profile.self.cycles-pp.__might_resched
0.12 ± 4% -0.1 0.02 ± 99% perf-profile.self.cycles-pp.__do_munmap
0.12 ± 3% -0.1 0.05 perf-profile.self.cycles-pp.folio_unlock
0.10 ± 3% -0.1 0.03 ± 70% perf-profile.self.cycles-pp.vmacache_find
0.22 ± 4% -0.1 0.15 ± 2% perf-profile.self.cycles-pp.folio_lruvec_lock_irq
0.11 ± 3% -0.1 0.06 ± 6% perf-profile.self.cycles-pp._raw_spin_lock
0.12 ± 3% -0.1 0.07 ± 7% perf-profile.self.cycles-pp.next_uptodate_page
0.24 ± 3% -0.0 0.21 ± 5% perf-profile.self.cycles-pp.mlock_page
0.07 +0.0 0.10 ± 4% perf-profile.self.cycles-pp.__list_add_valid
0.00 +0.1 0.05 perf-profile.self.cycles-pp.walk_p4d_range
0.00 +0.1 0.05 ± 8% perf-profile.self.cycles-pp.mlock_pte_range
0.19 ± 2% +0.1 0.25 ± 6% perf-profile.self.cycles-pp.munlock_page
0.14 ± 4% +0.1 0.20 ± 7% perf-profile.self.cycles-pp.mem_cgroup_update_lru_size
0.00 +0.1 0.10 ± 7% perf-profile.self.cycles-pp.__list_del_entry_valid
91.08 +4.3 95.38 perf-profile.self.cycles-pp.native_queued_spin_lock_slowpath
Disclaimer:
Results have been estimated based on internal Intel analysis and are provided
for informational purposes only. Any difference in system hardware or software
design or configuration may affect actual performance.
---
0DAY/LKP+ Test Infrastructure Open Source Technology Center
https://lists.01.org/hyperkitty/list/lkp(a)lists.01.org Intel Corporation
Thanks,
Oliver Sang
[-- Attachment #2: config-5.17.0-rc2-00015-g237b4454014d --]
[-- Type: text/plain, Size: 174672 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 5.17.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-9 (Debian 9.3.0-22) 9.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23502
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23502
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
CONFIG_CONTEXT_TRACKING=y
# CONFIG_CONTEXT_TRACKING_FORCE is not set
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# CONFIG_BPF_LSM is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_SCHED_AVG_IRQ=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_RUDE_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_NOCB_CPU=y
# end of RCU Subsystem
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#
# Scheduler features
#
# CONFIG_UCLAMP_TASK is not set
# end of Scheduler features
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_RD_ZSTD=y
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_USERFAULTFD=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_GUEST_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
CONFIG_SLAB_FREELIST_RANDOM=y
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# end of General setup
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_NR_GPIO=1024
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_AUDIT_ARCH=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_NUMACHIP is not set
# CONFIG_X86_VSMP is not set
CONFIG_X86_UV=y
# CONFIG_X86_GOLDFISH is not set
# CONFIG_X86_INTEL_MID is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_X86_HV_CALLBACK_VECTOR=y
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
CONFIG_ARCH_CPUIDLE_HALTPOLL=y
# CONFIG_PVH is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_JAILHOUSE_GUEST is not set
# CONFIG_ACRN_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_MAXSMP=y
CONFIG_NR_CPUS_RANGE_BEGIN=8192
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=8192
CONFIG_NR_CPUS=8192
CONFIG_SCHED_CLUSTER=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCELOG_LEGACY=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=m
#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=m
CONFIG_PERF_EVENTS_INTEL_RAPL=m
CONFIG_PERF_EVENTS_INTEL_CSTATE=m
# CONFIG_PERF_EVENTS_AMD_POWER is not set
CONFIG_PERF_EVENTS_AMD_UNCORE=y
# end of Performance monitoring
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_I8K=m
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_5LEVEL=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=m
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_X86_UMIP=y
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_X86_SGX is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
CONFIG_EFI_MIXED=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
# CONFIG_KEXEC_SIG is not set
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa
CONFIG_HOTPLUG_CPU=y
CONFIG_BOOTPARAM_HOTPLUG_CPU0=y
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
# end of Processor type and features
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_HIBERNATION_SNAPSHOT_DEV=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
# CONFIG_ACPI_FPDT is not set
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_ACPI_EC_DEBUGFS=m
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_TAD=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_CPPC_LIB=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_PLATFORM_PROFILE=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_NFIT=m
# CONFIG_NFIT_SECURITY_DEBUG is not set
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_HMAT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
CONFIG_ACPI_APEI_MEMORY_FAILURE=y
CONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_ACPI_DPTF is not set
CONFIG_ACPI_WATCHDOG=y
CONFIG_ACPI_EXTLOG=m
CONFIG_ACPI_ADXL=y
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
CONFIG_ACPI_PCC=y
CONFIG_PMIC_OPREGION=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_PRMT=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not set
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
CONFIG_X86_POWERNOW_K8=m
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
# end of CPU Frequency scaling
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set
CONFIG_HALTPOLL_CPUIDLE=y
# end of CPU Idle
CONFIG_INTEL_IDLE=y
# end of Power management and ACPI options
#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_MMCONF_FAM10H=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)
#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
# end of Binary Emulations
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_PFNCACHE=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_DIRTY_RING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_KVM_COMPAT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_HAVE_KVM_NO_POLL=y
CONFIG_KVM_XFER_TO_GUEST_WORK=y
CONFIG_HAVE_KVM_PM_NOTIFIER=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_XEN is not set
CONFIG_KVM_MMU_AUDIT=y
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_KPROBES_ON_FTRACE=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
CONFIG_MODULE_SIG_SHA256=y
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha256"
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=m
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_FC_APPID is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_HAVE_BOOTMEM_INFO_NODE=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_MHP_MEMMAP_ON_MEMORY=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=m
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_ZSWAP=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
# CONFIG_ZSWAP_DEFAULT_ON is not set
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_ZONE_DEVICE=y
CONFIG_DEV_PAGEMAP_OPS=y
CONFIG_DEVICE_PRIVATE=y
CONFIG_VMAP_PFN=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_XDP_SOCKETS=y
# CONFIG_XDP_SOCKETS_DIAG is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_ESP_OFFLOAD=m
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
CONFIG_INET_RAW_DIAG=m
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_NV=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_CONG_DCTCP=m
# CONFIG_TCP_CONG_CDG is not set
CONFIG_TCP_CONG_BBR=m
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_ESP_OFFLOAD=m
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
# CONFIG_IPV6_ILA is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
CONFIG_NETLABEL=y
# CONFIG_MPTCP is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=m
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_INGRESS=y
CONFIG_NETFILTER_EGRESS=y
CONFIG_NETFILTER_SKIP_EGRESS=y
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
# CONFIG_NETFILTER_NETLINK_HOOK is not set
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_NETLINK_OSF=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_LOG_SYSLOG=m
CONFIG_NETFILTER_CONNCOUNT=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
CONFIG_NF_CONNTRACK_LABELS=y
CONFIG_NF_CT_PROTO_DCCP=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_SNMP=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NF_CT_NETLINK_TIMEOUT=m
CONFIG_NF_CT_NETLINK_HELPER=m
CONFIG_NETFILTER_NETLINK_GLUE_CT=y
CONFIG_NF_NAT=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_SIP=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_REDIRECT=y
CONFIG_NF_NAT_MASQUERADE=y
CONFIG_NETFILTER_SYNPROXY=m
CONFIG_NF_TABLES=m
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_NUMGEN=m
CONFIG_NFT_CT=m
CONFIG_NFT_CONNLIMIT=m
CONFIG_NFT_LOG=m
CONFIG_NFT_LIMIT=m
CONFIG_NFT_MASQ=m
CONFIG_NFT_REDIR=m
CONFIG_NFT_NAT=m
# CONFIG_NFT_TUNNEL is not set
CONFIG_NFT_OBJREF=m
CONFIG_NFT_QUEUE=m
CONFIG_NFT_QUOTA=m
CONFIG_NFT_REJECT=m
CONFIG_NFT_REJECT_INET=m
CONFIG_NFT_COMPAT=m
CONFIG_NFT_HASH=m
CONFIG_NFT_FIB=m
CONFIG_NFT_FIB_INET=m
# CONFIG_NFT_XFRM is not set
CONFIG_NFT_SOCKET=m
# CONFIG_NFT_OSF is not set
# CONFIG_NFT_TPROXY is not set
# CONFIG_NFT_SYNPROXY is not set
CONFIG_NF_DUP_NETDEV=m
CONFIG_NFT_DUP_NETDEV=m
CONFIG_NFT_FWD_NETDEV=m
CONFIG_NFT_FIB_NETDEV=m
# CONFIG_NFT_REJECT_NETDEV is not set
# CONFIG_NF_FLOW_TABLE is not set
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XTABLES_COMPAT=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
CONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=m
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_CT=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_HMARK=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_LOG=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_NAT=m
CONFIG_NETFILTER_XT_TARGET_NETMAP=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
CONFIG_NETFILTER_XT_MATCH_BPF=m
CONFIG_NETFILTER_XT_MATCH_CGROUP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_CPU=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# end of Core Netfilter Configuration
CONFIG_IP_SET=m
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=m
CONFIG_IP_SET_BITMAP_IPMAC=m
CONFIG_IP_SET_BITMAP_PORT=m
CONFIG_IP_SET_HASH_IP=m
CONFIG_IP_SET_HASH_IPMARK=m
CONFIG_IP_SET_HASH_IPPORT=m
CONFIG_IP_SET_HASH_IPPORTIP=m
CONFIG_IP_SET_HASH_IPPORTNET=m
CONFIG_IP_SET_HASH_IPMAC=m
CONFIG_IP_SET_HASH_MAC=m
CONFIG_IP_SET_HASH_NETPORTNET=m
CONFIG_IP_SET_HASH_NET=m
CONFIG_IP_SET_HASH_NETNET=m
CONFIG_IP_SET_HASH_NETPORT=m
CONFIG_IP_SET_HASH_NETIFACE=m
CONFIG_IP_SET_LIST_SET=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_FO=m
CONFIG_IP_VS_OVF=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
# CONFIG_IP_VS_MH is not set
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
# CONFIG_IP_VS_TWOS is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS MH scheduler
#
CONFIG_IP_VS_MH_TAB_INDEX=12
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_SOCKET_IPV4=m
CONFIG_NF_TPROXY_IPV4=m
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_REJECT_IPV4=m
CONFIG_NFT_DUP_IPV4=m
CONFIG_NFT_FIB_IPV4=m
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=m
CONFIG_NF_LOG_ARP=m
CONFIG_NF_LOG_IPV4=m
CONFIG_NF_REJECT_IPV4=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_RPFILTER=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_SYNPROXY=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# end of IP: Netfilter Configuration
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV6=m
CONFIG_NF_TPROXY_IPV6=m
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_REJECT_IPV6=m
CONFIG_NFT_DUP_IPV6=m
CONFIG_NFT_FIB_IPV6=m
CONFIG_NF_DUP_IPV6=m
CONFIG_NF_REJECT_IPV6=m
CONFIG_NF_LOG_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RPFILTER=m
CONFIG_IP6_NF_MATCH_RT=m
# CONFIG_IP6_NF_MATCH_SRH is not set
# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_TARGET_SYNPROXY=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_IP6_NF_NAT=m
CONFIG_IP6_NF_TARGET_MASQUERADE=m
CONFIG_IP6_NF_TARGET_NPT=m
# end of IPv6: Netfilter Configuration
CONFIG_NF_DEFRAG_IPV6=m
CONFIG_NF_TABLES_BRIDGE=m
# CONFIG_NFT_BRIDGE_META is not set
CONFIG_NFT_BRIDGE_REJECT=m
# CONFIG_NF_CONNTRACK_BRIDGE is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_BPFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_TFRC_LIB=y
# end of DCCP CCIDs Configuration
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# end of DCCP Kernel Hacking
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
# CONFIG_RDS is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_CRYPTO=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
CONFIG_6LOWPAN=m
# CONFIG_6LOWPAN_DEBUGFS is not set
# CONFIG_6LOWPAN_NHC is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_IEEE802154_6LOWPAN=m
CONFIG_MAC802154=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
# CONFIG_NET_SCH_FQ_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
# CONFIG_DEFAULT_FQ is not set
# CONFIG_DEFAULT_CODEL is not set
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_SFQ is not set
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
CONFIG_NET_CLS_FLOWER=m
CONFIG_NET_CLS_MATCHALL=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_EMATCH_CANID is not set
CONFIG_NET_EMATCH_IPSET=m
# CONFIG_NET_EMATCH_IPT is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_SAMPLE=m
# CONFIG_NET_ACT_IPT is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_MPLS is not set
CONFIG_NET_ACT_VLAN=m
CONFIG_NET_ACT_BPF=m
# CONFIG_NET_ACT_CONNMARK is not set
# CONFIG_NET_ACT_CTINFO is not set
CONFIG_NET_ACT_SKBMOD=m
# CONFIG_NET_ACT_IFE is not set
CONFIG_NET_ACT_TUNNEL_KEY=m
# CONFIG_NET_ACT_GATE is not set
# CONFIG_NET_TC_SKB_EXT is not set
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
CONFIG_VSOCKETS_LOOPBACK=m
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=m
CONFIG_HYPERV_VSOCKETS=m
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=m
CONFIG_MPLS_IPTUNNEL=m
CONFIG_NET_NSH=y
# CONFIG_HSR is not set
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=y
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
CONFIG_CAN=m
CONFIG_CAN_RAW=m
CONFIG_CAN_BCM=m
CONFIG_CAN_GW=m
# CONFIG_CAN_J1939 is not set
# CONFIG_CAN_ISOTP is not set
#
# CAN Device Drivers
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_VXCAN is not set
CONFIG_CAN_SLCAN=m
CONFIG_CAN_DEV=m
CONFIG_CAN_CALC_BITTIMING=y
# CONFIG_CAN_KVASER_PCIEFD is not set
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
CONFIG_CAN_C_CAN_PCI=m
CONFIG_CAN_CC770=m
# CONFIG_CAN_CC770_ISA is not set
CONFIG_CAN_CC770_PLATFORM=m
# CONFIG_CAN_IFI_CANFD is not set
# CONFIG_CAN_M_CAN is not set
# CONFIG_CAN_PEAK_PCIEFD is not set
CONFIG_CAN_SJA1000=m
CONFIG_CAN_EMS_PCI=m
# CONFIG_CAN_F81601 is not set
CONFIG_CAN_KVASER_PCI=m
CONFIG_CAN_PEAK_PCI=m
CONFIG_CAN_PEAK_PCIEC=y
CONFIG_CAN_PLX_PCI=m
# CONFIG_CAN_SJA1000_ISA is not set
CONFIG_CAN_SJA1000_PLATFORM=m
CONFIG_CAN_SOFTING=m
#
# CAN SPI interfaces
#
# CONFIG_CAN_HI311X is not set
# CONFIG_CAN_MCP251X is not set
# CONFIG_CAN_MCP251XFD is not set
# end of CAN SPI interfaces
#
# CAN USB interfaces
#
# CONFIG_CAN_8DEV_USB is not set
# CONFIG_CAN_EMS_USB is not set
# CONFIG_CAN_ESD_USB2 is not set
# CONFIG_CAN_ETAS_ES58X is not set
# CONFIG_CAN_GS_USB is not set
# CONFIG_CAN_KVASER_USB is not set
# CONFIG_CAN_MCBA_USB is not set
# CONFIG_CAN_PEAK_USB is not set
# CONFIG_CAN_UCAN is not set
# end of CAN USB interfaces
# CONFIG_CAN_DEBUG_DEVICES is not set
# end of CAN Device Drivers
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
# CONFIG_BT_6LOWPAN is not set
# CONFIG_BT_LEDS is not set
# CONFIG_BT_MSFTEXT is not set
# CONFIG_BT_AOSPEXT is not set
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_INTEL is not set
# CONFIG_BT_HCIUART_AG6XX is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
# CONFIG_BT_MRVL_SDIO is not set
# CONFIG_BT_MTKSDIO is not set
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SELFTESTS=y
CONFIG_NET_SOCK_MSG=y
CONFIG_FAILOVER=m
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIE_ECRC=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_PCIE_DPC=y
# CONFIG_PCIE_PTM is not set
# CONFIG_PCIE_EDR is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_PF_STUB=m
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_P2PDMA is not set
CONFIG_PCI_LABEL=y
CONFIG_PCI_HYPERV=m
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
#
# PCI controller drivers
#
CONFIG_VMD=y
CONFIG_PCI_HYPERV_INTERFACE=m
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
CONFIG_AUXILIARY_BUS=y
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_REGMAP_SPI=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT is not set
CONFIG_FW_CFG_SYSFS=y
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
CONFIG_SYSFB=y
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=y
CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
CONFIG_APPLE_PROPERTIES=y
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# end of EFI (Extensible Firmware Interface) Support
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_DEV_PATH_PARSER=y
CONFIG_EFI_EARLYCON=y
CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_FD is not set
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=m
CONFIG_BLK_DEV_RBD=m
#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
CONFIG_NVME_MULTIPATH=y
# CONFIG_NVME_HWMON is not set
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_TCP is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
CONFIG_NVME_TARGET_LOOP=m
CONFIG_NVME_TARGET_FC=m
CONFIG_NVME_TARGET_FCLOOP=m
# CONFIG_NVME_TARGET_TCP is not set
# end of NVME Support
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
CONFIG_VMWARE_BALLOON=m
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
CONFIG_MISC_RTSX=m
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_INTEL_MEI_HDCP is not set
# CONFIG_INTEL_MEI_PXP is not set
CONFIG_VMWARE_VMCI=m
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
CONFIG_MISC_RTSX_PCI=m
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
# CONFIG_UACCE is not set
CONFIG_PVPANIC=y
# CONFIG_PVPANIC_MMIO is not set
# CONFIG_PVPANIC_PCI is not set
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_MPT3SAS=m
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_HYPERV_STORAGE=m
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
CONFIG_SCSI_ISCI=m
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_EFCT is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
CONFIG_SCSI_DH_HP_SW=y
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
# end of SCSI device support
CONFIG_ATA=m
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_FORCE=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_FAULTY=m
CONFIG_MD_CLUSTER=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
CONFIG_DM_ERA=m
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_MULTIPATH_HST is not set
# CONFIG_DM_MULTIPATH_IOA is not set
CONFIG_DM_DELAY=m
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
CONFIG_DM_LOG_WRITES=m
CONFIG_DM_INTEGRITY=m
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
CONFIG_TCM_USER2=m
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
# CONFIG_SBP_TARGET is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_AMT is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=m
# CONFIG_NLMON is not set
# CONFIG_NET_VRF is not set
# CONFIG_VSOCKMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_ENGLEDER=y
# CONFIG_TSNEP is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_GOOGLE=y
# CONFIG_GVE is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
CONFIG_IXGBE_IPSEC=y
# CONFIG_IXGBEVF is not set
CONFIG_I40E=y
# CONFIG_I40E_DCB is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_IGC=y
CONFIG_NET_VENDOR_MICROSOFT=y
# CONFIG_MICROSOFT_MANA is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_PRESTERA is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_PENSANDO=y
# CONFIG_IONIC is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
# CONFIG_ROCKER is not set
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_PHY_SEL is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VERTEXCOM=y
# CONFIG_MSE102X is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_XILINX_AXI_EMAC is not set
# CONFIG_XILINX_LL_TEMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y
CONFIG_SWPHY=y
# CONFIG_LED_TRIGGER_PHY is not set
CONFIG_FIXED_PHY=y
#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM54140_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_INTEL_XWAY_PHY is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MARVELL_10G_PHY is not set
# CONFIG_MARVELL_88X2222_PHY is not set
# CONFIG_MAXLINEAR_GPHY is not set
# CONFIG_MEDIATEK_GE_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_NXP_C45_TJA11XX_PHY is not set
# CONFIG_NXP_TJA11XX_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_TERANETICS_PHY is not set
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83869_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_BUS=y
CONFIG_FWNODE_MDIO=y
CONFIG_ACPI_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_THUNDER is not set
#
# MDIO Multiplexers
#
#
# PCS device drivers
#
# CONFIG_PCS_XPCS is not set
# end of PCS device drivers
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_USB_NET_DRIVERS=y
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_RTL8152=y
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_AX88179_178A=y
# CONFIG_USB_NET_CDCETHER is not set
# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_CDC_NCM is not set
# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
# CONFIG_USB_NET_CDC_MBIM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SR9700 is not set
# CONFIG_USB_NET_SR9800 is not set
# CONFIG_USB_NET_SMSC75XX is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_NET_CX82310_ETH is not set
# CONFIG_USB_NET_KALMIA is not set
# CONFIG_USB_NET_QMI_WWAN is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_USB_IPHETH is not set
# CONFIG_USB_SIERRA_NET is not set
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_AR5523 is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
# CONFIG_ATH11K is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWLMEI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
CONFIG_WLAN_VENDOR_MICROCHIP=y
# CONFIG_WILC1000_SDIO is not set
# CONFIG_WILC1000_SPI is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_RTL8XXXU is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
# CONFIG_USB_ZD1201 is not set
# CONFIG_ZD1211RW is not set
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PCIE is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ATUSB is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_IEEE802154_HWSIM is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_HYPERV_NET is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_SPARSEKMAP=m
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
# CONFIG_KEYBOARD_APPLESPI is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1050 is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_SAMSUNG is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_CYPRESS_SF is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_VMMOUSE=y
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=m
CONFIG_RMI4_I2C=m
CONFIG_RMI4_SPI=m
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=m
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
# CONFIG_RMI4_F54 is not set
CONFIG_RMI4_F55=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_NR_UARTS=64
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DWLIB=y
CONFIG_SERIAL_8250_DW=y
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
CONFIG_SERIAL_8250_PERICOM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_ARC=m
CONFIG_SERIAL_ARC_NR_PORTS=1
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers
CONFIG_SERIAL_MCTRL_GPIO=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
CONFIG_NOZOMI=m
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_SERIAL_DEV_BUS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=y
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=y
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HPET_MMAP_DEFAULT is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_UV_MMTIMER=m
CONFIG_TCG_TPM=y
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=y
CONFIG_TCG_TIS=y
# CONFIG_TCG_TIS_SPI is not set
# CONFIG_TCG_TIS_I2C_CR50 is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TCG_CRB=y
# CONFIG_TCG_VTPM_PROXY is not set
CONFIG_TCG_TIS_ST33ZP24=m
CONFIG_TCG_TIS_ST33ZP24_I2C=m
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_AMD_MP2 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PLATFORM=m
CONFIG_I2C_DESIGNWARE_BAYTRAIL=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=m
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_LM70_LLP is not set
# CONFIG_SPI_LANTIQ_SSC is not set
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set
# CONFIG_SPI_AMD is not set
#
# SPI Multiplexer support
#
# CONFIG_SPI_MUX is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPI_DYNAMIC=y
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
CONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_INES is not set
CONFIG_PTP_1588_CLOCK_KVM=m
# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
# CONFIG_PTP_1588_CLOCK_IDTCM is not set
# CONFIG_PTP_1588_CLOCK_VMW is not set
# end of PTP clock support
CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_PINCTRL_AMD=m
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
#
# Intel pinctrl drivers
#
CONFIG_PINCTRL_BAYTRAIL=y
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_LYNXPOINT is not set
CONFIG_PINCTRL_INTEL=y
# CONFIG_PINCTRL_ALDERLAKE is not set
CONFIG_PINCTRL_BROXTON=m
CONFIG_PINCTRL_CANNONLAKE=m
CONFIG_PINCTRL_CEDARFORK=m
CONFIG_PINCTRL_DENVERTON=m
# CONFIG_PINCTRL_ELKHARTLAKE is not set
# CONFIG_PINCTRL_EMMITSBURG is not set
CONFIG_PINCTRL_GEMINILAKE=m
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_JASPERLAKE is not set
# CONFIG_PINCTRL_LAKEFIELD is not set
CONFIG_PINCTRL_LEWISBURG=m
CONFIG_PINCTRL_SUNRISEPOINT=m
# CONFIG_PINCTRL_TIGERLAKE is not set
# end of Intel pinctrl drivers
#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_GENERIC=m
#
# Memory mapped GPIO drivers
#
CONFIG_GPIO_AMDPT=m
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
CONFIG_GPIO_ICH=m
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set
# end of Memory mapped GPIO drivers
#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set
# end of Port-mapped I/O GPIO drivers
#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set
# end of I2C GPIO expanders
#
# MFD GPIO expanders
#
# end of MFD GPIO expanders
#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set
# end of PCI GPIO expanders
#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set
# end of SPI GPIO expanders
#
# USB GPIO expanders
#
# end of USB GPIO expanders
#
# Virtual GPIO drivers
#
# CONFIG_GPIO_AGGREGATOR is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VIRTIO is not set
# CONFIG_GPIO_SIM is not set
# end of Virtual GPIO drivers
# CONFIG_W1 is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_RESET_RESTART is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_POWER_SUPPLY_HWMON=y
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LT3651 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ2515X is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_BQ25980 is not set
# CONFIG_CHARGER_BQ256XX is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_BD99954 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
# CONFIG_SENSORS_ADM1177 is not set
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7X10=m
# CONFIG_SENSORS_ADT7310 is not set
CONFIG_SENSORS_ADT7410=m
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
CONFIG_SENSORS_ASC7621=m
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
# CONFIG_SENSORS_DRIVETEMP is not set
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_I5500=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2947_SPI is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2992 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX127 is not set
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_MAX6697=m
# CONFIG_SENSORS_MAX31790 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MLXREG_FAN is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_ADCXX is not set
CONFIG_SENSORS_LM63=m
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_LM95234=m
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_PMBUS=m
CONFIG_SENSORS_PMBUS=m
# CONFIG_SENSORS_ADM1266 is not set
CONFIG_SENSORS_ADM1275=m
# CONFIG_SENSORS_BEL_PFE is not set
# CONFIG_SENSORS_BPA_RS600 is not set
# CONFIG_SENSORS_DELTA_AHE50DC_FAN is not set
# CONFIG_SENSORS_FSP_3Y is not set
# CONFIG_SENSORS_IBM_CFFPS is not set
# CONFIG_SENSORS_DPS920AB is not set
# CONFIG_SENSORS_INSPUR_IPSPS is not set
# CONFIG_SENSORS_IR35221 is not set
# CONFIG_SENSORS_IR36021 is not set
# CONFIG_SENSORS_IR38064 is not set
# CONFIG_SENSORS_IRPS5401 is not set
# CONFIG_SENSORS_ISL68137 is not set
CONFIG_SENSORS_LM25066=m
CONFIG_SENSORS_LTC2978=m
# CONFIG_SENSORS_LTC3815 is not set
# CONFIG_SENSORS_MAX15301 is not set
CONFIG_SENSORS_MAX16064=m
# CONFIG_SENSORS_MAX16601 is not set
# CONFIG_SENSORS_MAX20730 is not set
# CONFIG_SENSORS_MAX20751 is not set
# CONFIG_SENSORS_MAX31785 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
# CONFIG_SENSORS_MP2888 is not set
# CONFIG_SENSORS_MP2975 is not set
# CONFIG_SENSORS_MP5023 is not set
# CONFIG_SENSORS_PIM4328 is not set
# CONFIG_SENSORS_PM6764TR is not set
# CONFIG_SENSORS_PXE1610 is not set
# CONFIG_SENSORS_Q54SJ108A2 is not set
# CONFIG_SENSORS_STPDDC60 is not set
# CONFIG_SENSORS_TPS40422 is not set
# CONFIG_SENSORS_TPS53679 is not set
CONFIG_SENSORS_UCD9000=m
CONFIG_SENSORS_UCD9200=m
# CONFIG_SENSORS_XDPE122 is not set
CONFIG_SENSORS_ZL6100=m
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
# CONFIG_SENSORS_EMC2103 is not set
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS7828=m
# CONFIG_SENSORS_ADS7871 is not set
CONFIG_SENSORS_AMC6821=m
CONFIG_SENSORS_INA209=m
CONFIG_SENSORS_INA2XX=m
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
# CONFIG_SENSORS_TMP513 is not set
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_WMI_EC is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_NETLINK is not set
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set
#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers
CONFIG_INTEL_PCH_THERMAL=m
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# end of Intel thermal drivers
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
CONFIG_WATCHDOG_SYSFS=y
# CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDAT_WDT=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MLX_WDT is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
# CONFIG_SP5100_TCO is not set
CONFIG_SBC_FITPC2_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=m
# CONFIG_60XX_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_SMSC_SCH311X_WDT=m
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
CONFIG_INTEL_MEI_WDT=m
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
CONFIG_BCMA=m
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
CONFIG_BCMA_DRIVER_PCI=y
CONFIG_BCMA_DRIVER_GMAC_CMN=y
CONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=m
CONFIG_MFD_INTEL_LPSS=y
CONFIG_MFD_INTEL_LPSS_ACPI=y
CONFIG_MFD_INTEL_LPSS_PCI=y
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
CONFIG_MFD_SM501=m
CONFIG_MFD_SM501_GPIO=y
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
CONFIG_MFD_VX855=m
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_INTEL_M10_BMC is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
CONFIG_RC_CORE=m
CONFIG_RC_MAP=m
CONFIG_LIRC=y
CONFIG_RC_DECODERS=y
CONFIG_IR_NEC_DECODER=m
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_JVC_DECODER=m
CONFIG_IR_SONY_DECODER=m
CONFIG_IR_SANYO_DECODER=m
# CONFIG_IR_SHARP_DECODER is not set
CONFIG_IR_MCE_KBD_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_RCMM_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_RC_ATI_REMOTE is not set
CONFIG_IR_ENE=m
# CONFIG_IR_IMON is not set
# CONFIG_IR_IMON_RAW is not set
# CONFIG_IR_MCEUSB is not set
CONFIG_IR_ITE_CIR=m
CONFIG_IR_FINTEK=m
CONFIG_IR_NUVOTON=m
# CONFIG_IR_REDRAT3 is not set
# CONFIG_IR_STREAMZAP is not set
CONFIG_IR_WINBOND_CIR=m
# CONFIG_IR_IGORPLUGUSB is not set
# CONFIG_IR_IGUANA is not set
# CONFIG_IR_TTUSBIR is not set
# CONFIG_RC_LOOPBACK is not set
CONFIG_IR_SERIAL=m
CONFIG_IR_SERIAL_TRANSMITTER=y
# CONFIG_RC_XBOX_DVD is not set
# CONFIG_IR_TOY is not set
#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
# CONFIG_CEC_SECO is not set
# CONFIG_USB_PULSE8_CEC is not set
# CONFIG_USB_RAINSHADOW_CEC is not set
# end of CEC support
CONFIG_MEDIA_SUPPORT=m
# CONFIG_MEDIA_SUPPORT_FILTER is not set
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
#
# Media device types
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
CONFIG_MEDIA_RADIO_SUPPORT=y
CONFIG_MEDIA_SDR_SUPPORT=y
CONFIG_MEDIA_PLATFORM_SUPPORT=y
CONFIG_MEDIA_TEST_SUPPORT=y
# end of Media device types
#
# Media core support
#
CONFIG_VIDEO_DEV=m
CONFIG_MEDIA_CONTROLLER=y
CONFIG_DVB_CORE=m
# end of Media core support
#
# Video4Linux options
#
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L2_I2C=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# end of Video4Linux options
#
# Media controller options
#
# CONFIG_MEDIA_CONTROLLER_DVB is not set
# end of Media controller options
#
# Digital TV options
#
# CONFIG_DVB_MMAP is not set
CONFIG_DVB_NET=y
CONFIG_DVB_MAX_ADAPTERS=16
CONFIG_DVB_DYNAMIC_MINORS=y
# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set
# CONFIG_DVB_ULE_DEBUG is not set
# end of Digital TV options
#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_SI470X is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_MR800 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_SHARK is not set
# CONFIG_RADIO_SHARK2 is not set
# CONFIG_USB_KEENE is not set
# CONFIG_USB_RAREMONO is not set
# CONFIG_USB_MA901 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_SAA7706H is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_RADIO_WL1273 is not set
CONFIG_VIDEOBUF2_CORE=m
CONFIG_VIDEOBUF2_V4L2=m
CONFIG_VIDEOBUF2_MEMOPS=m
CONFIG_VIDEOBUF2_VMALLOC=m
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_DVB_PLATFORM_DRIVERS is not set
# CONFIG_SDR_PLATFORM_DRIVERS is not set
#
# MMC/SDIO DVB adapters
#
# CONFIG_SMS_SDIO_DRV is not set
# CONFIG_V4L_TEST_DRIVERS is not set
# CONFIG_DVB_TEST_DRIVERS is not set
#
# FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
# end of Media drivers
#
# Media ancillary drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS3308 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_UDA1342 is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set
# CONFIG_VIDEO_SONY_BTF_MPX is not set
# end of Audio decoders, processors and mixers
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
# end of RDS decoders
#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_ADV7604 is not set
# CONFIG_VIDEO_ADV7842 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_ML86V7667 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_TC358743 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_TW2804 is not set
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_TW9910 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set
# end of Video decoders
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_ADV7511 is not set
# CONFIG_VIDEO_AD9389B is not set
# CONFIG_VIDEO_AK881X is not set
# CONFIG_VIDEO_THS8200 is not set
# end of Video encoders
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# end of Video improvement chips
#
# Audio/Video compression chips
#
# CONFIG_VIDEO_SAA6752HS is not set
# end of Audio/Video compression chips
#
# SDR tuner chips
#
# CONFIG_SDR_MAX2175 is not set
# end of SDR tuner chips
#
# Miscellaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set
# CONFIG_VIDEO_I2C is not set
# CONFIG_VIDEO_ST_MIPID02 is not set
# end of Miscellaneous helper chips
#
# Camera sensor devices
#
# CONFIG_VIDEO_HI556 is not set
# CONFIG_VIDEO_HI846 is not set
# CONFIG_VIDEO_IMX208 is not set
# CONFIG_VIDEO_IMX214 is not set
# CONFIG_VIDEO_IMX219 is not set
# CONFIG_VIDEO_IMX258 is not set
# CONFIG_VIDEO_IMX274 is not set
# CONFIG_VIDEO_IMX290 is not set
# CONFIG_VIDEO_IMX319 is not set
# CONFIG_VIDEO_IMX355 is not set
# CONFIG_VIDEO_OV02A10 is not set
# CONFIG_VIDEO_OV2640 is not set
# CONFIG_VIDEO_OV2659 is not set
# CONFIG_VIDEO_OV2680 is not set
# CONFIG_VIDEO_OV2685 is not set
# CONFIG_VIDEO_OV2740 is not set
# CONFIG_VIDEO_OV5647 is not set
# CONFIG_VIDEO_OV5648 is not set
# CONFIG_VIDEO_OV6650 is not set
# CONFIG_VIDEO_OV5670 is not set
# CONFIG_VIDEO_OV5675 is not set
# CONFIG_VIDEO_OV5693 is not set
# CONFIG_VIDEO_OV5695 is not set
# CONFIG_VIDEO_OV7251 is not set
# CONFIG_VIDEO_OV772X is not set
# CONFIG_VIDEO_OV7640 is not set
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_OV7740 is not set
# CONFIG_VIDEO_OV8856 is not set
# CONFIG_VIDEO_OV8865 is not set
# CONFIG_VIDEO_OV9640 is not set
# CONFIG_VIDEO_OV9650 is not set
# CONFIG_VIDEO_OV9734 is not set
# CONFIG_VIDEO_OV13858 is not set
# CONFIG_VIDEO_OV13B10 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9M001 is not set
# CONFIG_VIDEO_MT9M032 is not set
# CONFIG_VIDEO_MT9M111 is not set
# CONFIG_VIDEO_MT9P031 is not set
# CONFIG_VIDEO_MT9T001 is not set
# CONFIG_VIDEO_MT9T112 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_MT9V032 is not set
# CONFIG_VIDEO_MT9V111 is not set
# CONFIG_VIDEO_SR030PC30 is not set
# CONFIG_VIDEO_NOON010PC30 is not set
# CONFIG_VIDEO_M5MOLS is not set
# CONFIG_VIDEO_RDACM20 is not set
# CONFIG_VIDEO_RDACM21 is not set
# CONFIG_VIDEO_RJ54N1 is not set
# CONFIG_VIDEO_S5K6AA is not set
# CONFIG_VIDEO_S5K6A3 is not set
# CONFIG_VIDEO_S5K4ECGX is not set
# CONFIG_VIDEO_S5K5BAF is not set
# CONFIG_VIDEO_CCS is not set
# CONFIG_VIDEO_ET8EK8 is not set
# CONFIG_VIDEO_S5C73M3 is not set
# end of Camera sensor devices
#
# Lens drivers
#
# CONFIG_VIDEO_AD5820 is not set
# CONFIG_VIDEO_AK7375 is not set
# CONFIG_VIDEO_DW9714 is not set
# CONFIG_VIDEO_DW9768 is not set
# CONFIG_VIDEO_DW9807_VCM is not set
# end of Lens drivers
#
# Flash devices
#
# CONFIG_VIDEO_ADP1653 is not set
# CONFIG_VIDEO_LM3560 is not set
# CONFIG_VIDEO_LM3646 is not set
# end of Flash devices
#
# SPI helper chips
#
# CONFIG_VIDEO_GS1662 is not set
# end of SPI helper chips
#
# Media SPI Adapters
#
CONFIG_CXD2880_SPI_DRV=m
# end of Media SPI Adapters
CONFIG_MEDIA_TUNER=m
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA18250=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MSI001=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_MT2063=m
CONFIG_MEDIA_TUNER_MT2266=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_QT1010=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_XC4000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_MEDIA_TUNER_MAX2165=m
CONFIG_MEDIA_TUNER_TDA18218=m
CONFIG_MEDIA_TUNER_FC0011=m
CONFIG_MEDIA_TUNER_FC0012=m
CONFIG_MEDIA_TUNER_FC0013=m
CONFIG_MEDIA_TUNER_TDA18212=m
CONFIG_MEDIA_TUNER_E4000=m
CONFIG_MEDIA_TUNER_FC2580=m
CONFIG_MEDIA_TUNER_M88RS6000T=m
CONFIG_MEDIA_TUNER_TUA9001=m
CONFIG_MEDIA_TUNER_SI2157=m
CONFIG_MEDIA_TUNER_IT913X=m
CONFIG_MEDIA_TUNER_R820T=m
CONFIG_MEDIA_TUNER_MXL301RF=m
CONFIG_MEDIA_TUNER_QM1D1C0042=m
CONFIG_MEDIA_TUNER_QM1D1B0004=m
# end of Customize TV tuners
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=m
CONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV0910=m
CONFIG_DVB_STV6110x=m
CONFIG_DVB_STV6111=m
CONFIG_DVB_MXL5XX=m
CONFIG_DVB_M88DS3103=m
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=m
CONFIG_DVB_TDA18271C2DD=m
CONFIG_DVB_SI2165=m
CONFIG_DVB_MN88472=m
CONFIG_DVB_MN88473=m
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_ZL10036=m
CONFIG_DVB_ZL10039=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_STV0288=m
CONFIG_DVB_STB6000=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_STV6110=m
CONFIG_DVB_STV0900=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_TDA8261=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TUNER_CX24113=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
CONFIG_DVB_CX24116=m
CONFIG_DVB_CX24117=m
CONFIG_DVB_CX24120=m
CONFIG_DVB_SI21XX=m
CONFIG_DVB_TS2020=m
CONFIG_DVB_DS3000=m
CONFIG_DVB_MB86A16=m
CONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_S5H1432=m
CONFIG_DVB_DRXD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_DIB9000=m
CONFIG_DVB_TDA10048=m
CONFIG_DVB_AF9013=m
CONFIG_DVB_EC100=m
CONFIG_DVB_STV0367=m
CONFIG_DVB_CXD2820R=m
CONFIG_DVB_CXD2841ER=m
CONFIG_DVB_RTL2830=m
CONFIG_DVB_RTL2832=m
CONFIG_DVB_RTL2832_SDR=m
CONFIG_DVB_SI2168=m
CONFIG_DVB_ZD1301_DEMOD=m
CONFIG_DVB_CXD2880=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_LGDT3305=m
CONFIG_DVB_LGDT3306A=m
CONFIG_DVB_LG2160=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_AU8522_DTV=m
CONFIG_DVB_AU8522_V4L=m
CONFIG_DVB_S5H1411=m
CONFIG_DVB_MXL692=m
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=m
CONFIG_DVB_DIB8000=m
CONFIG_DVB_MB86A20S=m
#
# ISDB-S (satellite) & ISDB-T (terrestrial) frontends
#
CONFIG_DVB_TC90522=m
CONFIG_DVB_MN88443X=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
CONFIG_DVB_TUNER_DIB0090=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_DRX39XYJ=m
CONFIG_DVB_LNBH25=m
CONFIG_DVB_LNBH29=m
CONFIG_DVB_LNBP21=m
CONFIG_DVB_LNBP22=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_ISL6423=m
CONFIG_DVB_A8293=m
CONFIG_DVB_LGS8GL5=m
CONFIG_DVB_LGS8GXX=m
CONFIG_DVB_ATBM8830=m
CONFIG_DVB_TDA665x=m
CONFIG_DVB_IX2505V=m
CONFIG_DVB_M88RS2000=m
CONFIG_DVB_AF9033=m
CONFIG_DVB_HORUS3A=m
CONFIG_DVB_ASCOT2E=m
CONFIG_DVB_HELENE=m
#
# Common Interface (EN50221) controller drivers
#
CONFIG_DVB_CXD2099=m
CONFIG_DVB_SP2=m
# end of Customise DVB Frontends
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# end of Media ancillary drivers
#
# Graphics support
#
# CONFIG_AGP is not set
CONFIG_INTEL_GTT=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=64
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
CONFIG_DRM_MIPI_DSI=y
CONFIG_DRM_DP_AUX_CHARDEV=y
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_FORCE_PROBE=""
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
CONFIG_DRM_I915_GVT=y
# CONFIG_DRM_I915_GVT_KVMGT is not set
CONFIG_DRM_I915_REQUEST_TIMEOUT=20000
CONFIG_DRM_I915_FENCE_TIMEOUT=10000
CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250
CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500
CONFIG_DRM_I915_PREEMPT_TIMEOUT=640
CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000
CONFIG_DRM_I915_STOP_TIMEOUT=100
CONFIG_DRM_I915_TIMESLICE_DURATION=1
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_UDL is not set
CONFIG_DRM_AST=m
CONFIG_DRM_MGAG200=m
CONFIG_DRM_QXL=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
# CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
CONFIG_DRM_BOCHS=m
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_TINYDRM_HX8357D is not set
# CONFIG_TINYDRM_ILI9163 is not set
# CONFIG_TINYDRM_ILI9225 is not set
# CONFIG_TINYDRM_ILI9341 is not set
# CONFIG_TINYDRM_ILI9486 is not set
# CONFIG_TINYDRM_MI0283QT is not set
# CONFIG_TINYDRM_REPAPER is not set
# CONFIG_TINYDRM_ST7586 is not set
# CONFIG_TINYDRM_ST7735R is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_HYPERV is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
CONFIG_DRM_PRIVACY_SCREEN=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SM501 is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_HYPERV=m
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SSD1307 is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_L4F00242T03 is not set
# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_LCD_VGG2432A4 is not set
CONFIG_LCD_PLATFORM=m
# CONFIG_LCD_AMS369FG06 is not set
# CONFIG_LCD_LMS501KF03 is not set
# CONFIG_LCD_HX8357 is not set
# CONFIG_LCD_OTM3225A is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_KTD253 is not set
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630A is not set
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=m
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_APPLEIR is not set
CONFIG_HID_ASUS=m
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
CONFIG_HID_CMEDIA=m
# CONFIG_HID_CP2112 is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=m
# CONFIG_HID_FT260 is not set
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=m
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
# CONFIG_HID_UCLOGIC is not set
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
CONFIG_HID_ITE=m
CONFIG_HID_JABRA=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
CONFIG_HID_LENOVO=m
# CONFIG_HID_LETSKETCH is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=m
# CONFIG_HID_NTRIG is not set
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LCD=y
CONFIG_HID_PICOLCD_LEDS=y
CONFIG_HID_PICOLCD_CIR=y
CONFIG_HID_PLANTRONICS=m
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
# CONFIG_HID_ROCCAT is not set
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SONY is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_RMI=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=y
CONFIG_HID_SENSOR_CUSTOM_SENSOR=m
CONFIG_HID_ALPS=m
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_ACPI is not set
# end of I2C HID support
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=m
# CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER is not set
# end of Intel ISH HID support
#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support
# end of HID support
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_USB_CONN_GPIO is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
CONFIG_USB_LEDS_TRIGGER_USBPORT=y
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=y
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_BCMA is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ATM is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
CONFIG_TYPEC=y
# CONFIG_TYPEC_TCPM is not set
CONFIG_TYPEC_UCSI=y
# CONFIG_UCSI_CCG is not set
CONFIG_UCSI_ACPI=y
# CONFIG_TYPEC_TPS6598X is not set
# CONFIG_TYPEC_STUSB160X is not set
#
# USB Type-C Multiplexer/DeMultiplexer Switch support
#
# CONFIG_TYPEC_MUX_PI3USB30532 is not set
# end of USB Type-C Multiplexer/DeMultiplexer Switch support
#
# USB Type-C Alternate Mode drivers
#
# CONFIG_TYPEC_DP_ALTMODE is not set
# end of USB Type-C Alternate Mode drivers
# CONFIG_USB_ROLE_SWITCH is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
CONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MMC_VUB300 is not set
# CONFIG_MMC_USHC is not set
# CONFIG_MMC_USDHI6ROL0 is not set
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_HSQ is not set
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
#
# LED drivers
#
# CONFIG_LEDS_APU is not set
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP50XX is not set
CONFIG_LEDS_CLEVO_MAIL=m
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_PWM is not set
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXCPLD=m
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
# CONFIG_LEDS_TRIGGER_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
CONFIG_EDAC_GHES=y
CONFIG_EDAC_AMD64=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
CONFIG_EDAC_IE31200=m
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_EDAC_SBRIDGE=m
CONFIG_EDAC_SKX=m
# CONFIG_EDAC_I10NM is not set
CONFIG_EDAC_PND2=m
# CONFIG_EDAC_IGEN6 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_SYSTOHC is not set
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1307_CENTURY is not set
CONFIG_RTC_DRV_DS1374=m
# CONFIG_RTC_DRV_DS1374_WDT is not set
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_ISL12022=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8523=m
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_BQ32K=m
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8010 is not set
CONFIG_RTC_DRV_RX8581=m
CONFIG_RTC_DRV_RX8025=m
CONFIG_RTC_DRV_EM3027=m
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RX4581=m
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
CONFIG_RTC_DRV_DS3232=m
CONFIG_RTC_DRV_DS3232_HWMON=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_RV3029C2=m
# CONFIG_RTC_DRV_RV3029_HWMON is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_DS2404=m
CONFIG_RTC_DRV_STK17TA8=m
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_MSM6242=m
CONFIG_RTC_DRV_BQ4802=m
CONFIG_RTC_DRV_RP5C01=m
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
CONFIG_INTEL_IDMA64=m
# CONFIG_INTEL_IDXD is not set
# CONFIG_INTEL_IDXD_COMPAT is not set
CONFIG_INTEL_IOATDMA=m
# CONFIG_PLX_DMA is not set
# CONFIG_AMD_PTDMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=m
CONFIG_DW_DMAC_PCI=y
# CONFIG_DW_EDMA is not set
# CONFIG_DW_EDMA_PCIE is not set
CONFIG_HSU_DMA=y
# CONFIG_SF_PDMA is not set
# CONFIG_INTEL_LDMA is not set
#
# DMA Clients
#
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
# CONFIG_DMABUF_HEAPS is not set
# CONFIG_DMABUF_SYSFS_STATS is not set
# end of DMABUF options
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV_GENIRQ=m
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
# CONFIG_UIO_NETX is not set
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
CONFIG_UIO_HV_GENERIC=m
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO_NOIOMMU=y
CONFIG_VFIO_PCI_CORE=m
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
# CONFIG_VFIO_PCI_IGD is not set
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_PMEM is not set
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MEM=m
CONFIG_VIRTIO_INPUT=m
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
CONFIG_VHOST_VSOCK=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_TIMER=y
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_HUAWEI_WMI is not set
# CONFIG_UV_SYSFS is not set
CONFIG_MXM_WMI=m
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not set
CONFIG_ACERHDF=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACER_WMI=m
# CONFIG_AMD_PMC is not set
# CONFIG_ADV_SWBUTTON is not set
CONFIG_APPLE_GMUX=m
CONFIG_ASUS_LAPTOP=m
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
# CONFIG_ASUS_TF103C_DOCK is not set
# CONFIG_MERAKI_MX100 is not set
CONFIG_EEEPC_LAPTOP=m
CONFIG_EEEPC_WMI=m
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
CONFIG_AMILO_RFKILL=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
# CONFIG_GPD_POCKET_FAN is not set
CONFIG_HP_ACCEL=m
# CONFIG_WIRELESS_HOTKEY is not set
CONFIG_HP_WMI=m
# CONFIG_IBM_RTL is not set
CONFIG_IDEAPAD_LAPTOP=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_INTEL_SAR_INT1092 is not set
CONFIG_INTEL_PMC_CORE=m
#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support
CONFIG_INTEL_WMI=y
# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
CONFIG_INTEL_WMI_THUNDERBOLT=m
CONFIG_INTEL_HID_EVENT=m
CONFIG_INTEL_VBTN=m
# CONFIG_INTEL_INT0002_VGPIO is not set
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_INTEL_ISHTP_ECLITE is not set
# CONFIG_INTEL_PUNIT_IPC is not set
CONFIG_INTEL_RST=m
# CONFIG_INTEL_SMARTCONNECT is not set
CONFIG_INTEL_TURBO_MAX_3=y
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# CONFIG_INTEL_VSEC is not set
CONFIG_MSI_LAPTOP=m
CONFIG_MSI_WMI=m
# CONFIG_PCENGINES_APU2 is not set
# CONFIG_BARCO_P50_GPIO is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_SAMSUNG_Q10=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
CONFIG_COMPAL_LAPTOP=m
# CONFIG_LG_LAPTOP is not set
CONFIG_PANASONIC_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
# CONFIG_SYSTEM76_ACPI is not set
CONFIG_TOPSTAR_LAPTOP=m
# CONFIG_I2C_MULTI_INSTANTIATE is not set
CONFIG_MLX_PLATFORM=m
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_MELLANOX_PLATFORM=y
CONFIG_MLXREG_HOTPLUG=m
# CONFIG_MLXREG_IO is not set
# CONFIG_MLXREG_LC is not set
CONFIG_SURFACE_PLATFORMS=y
# CONFIG_SURFACE3_WMI is not set
# CONFIG_SURFACE_3_POWER_OPREGION is not set
# CONFIG_SURFACE_GPE is not set
# CONFIG_SURFACE_HOTPLUG is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_LMK04832 is not set
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_LAN966X is not set
# CONFIG_COMMON_CLK_PWM is not set
# CONFIG_XILINX_VCU is not set
CONFIG_HWSPINLOCK=y
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOASID=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y
CONFIG_IRQ_REMAP=y
CONFIG_HYPERV_IOMMU=y
# CONFIG_VIRTIO_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
CONFIG_NTB=m
# CONFIG_NTB_MSI is not set
# CONFIG_NTB_AMD is not set
# CONFIG_NTB_IDT is not set
# CONFIG_NTB_INTEL is not set
# CONFIG_NTB_EPF is not set
# CONFIG_NTB_SWITCHTEC is not set
# CONFIG_NTB_PINGPONG is not set
# CONFIG_NTB_TOOL is not set
# CONFIG_NTB_PERF is not set
# CONFIG_NTB_TRANSPORT is not set
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_DEBUG is not set
# CONFIG_PWM_DWC is not set
CONFIG_PWM_LPSS=m
CONFIG_PWM_LPSS_PCI=m
CONFIG_PWM_LPSS_PLATFORM=m
# CONFIG_PWM_PCA9685 is not set
#
# IRQ chip support
#
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL_CORE=m
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_DTPM is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID is not set
# end of Android
CONFIG_LIBNVDIMM=m
CONFIG_BLK_DEV_PMEM=m
CONFIG_ND_BLK=m
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=m
CONFIG_BTT=y
CONFIG_ND_PFN=m
CONFIG_NVDIMM_PFN=y
CONFIG_NVDIMM_DAX=y
CONFIG_NVDIMM_KEYS=y
CONFIG_DAX=y
CONFIG_DEV_DAX=m
CONFIG_DEV_DAX_PMEM=m
CONFIG_DEV_DAX_KMEM=m
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
CONFIG_STM=m
# CONFIG_STM_PROTO_BASIC is not set
# CONFIG_STM_PROTO_SYS_T is not set
CONFIG_STM_DUMMY=m
CONFIG_STM_SOURCE_CONSOLE=m
CONFIG_STM_SOURCE_HEARTBEAT=m
CONFIG_STM_SOURCE_FTRACE=m
CONFIG_INTEL_TH=m
CONFIG_INTEL_TH_PCI=m
CONFIG_INTEL_TH_ACPI=m
CONFIG_INTEL_TH_GTH=m
CONFIG_INTEL_TH_STH=m
CONFIG_INTEL_TH_MSU=m
CONFIG_INTEL_TH_PTI=m
# CONFIG_INTEL_TH_DEBUG is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_UNISYS_VISORBUS is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# end of Device Drivers
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
CONFIG_XFS_SUPPORT_V4=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_ONLINE_SCRUB=y
# CONFIG_XFS_ONLINE_REPAIR is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_F2FS_FS_COMPRESSION is not set
CONFIG_F2FS_IOSTAT=y
CONFIG_FS_DAX=y
CONFIG_FS_DAX_PMD=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FS_ENCRYPTION_ALGS=y
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=m
CONFIG_NETFS_STATS=y
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_ERROR_INJECTION is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_VMCORE_DEVICE_DUMP=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_HUGETLB_PAGE_FREE_VMEMMAP=y
# CONFIG_HUGETLB_PAGE_FREE_VMEMMAP_DEFAULT_ON is not set
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_EFIVAR_FS=y
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_FTRACE is not set
CONFIG_PSTORE_RAM=m
# CONFIG_PSTORE_BLK is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V2 is not set
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
# CONFIG_NFSD_V4_2_INTER_SSC is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set
CONFIG_SUNRPC_DEBUG=y
CONFIG_CEPH_FS=m
# CONFIG_CEPH_FSCACHE is not set
CONFIG_CEPH_FS_POSIX_ACL=y
# CONFIG_CEPH_FS_SECURITY_LABEL is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SWN_UPCALL is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_REQUEST_CACHE is not set
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
CONFIG_INTEL_TXT=y
CONFIG_LSM_MMAP_MIN_ADDR=65535
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9
CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
# CONFIG_INTEGRITY_PLATFORM_KEYRING is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
# CONFIG_IMA_READ_POLICY is not set
CONFIG_IMA_APPRAISE=y
# CONFIG_IMA_ARCH_POLICY is not set
# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set
CONFIG_IMA_APPRAISE_BOOTPARAM=y
# CONFIG_IMA_APPRAISE_MODSIG is not set
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
# CONFIG_IMA_DISABLE_HTABLE is not set
CONFIG_EVM=y
CONFIG_EVM_ATTR_FSUUID=y
# CONFIG_EVM_ADD_XATTRS is not set
# CONFIG_EVM_LOAD_X509 is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# end of Memory initialization
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=y
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# CONFIG_CRYPTO_CURVE25519_X86 is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_ESSIV=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_XXHASH=m
CONFIG_CRYPTO_BLAKE2B=m
# CONFIG_CRYPTO_BLAKE2S is not set
# CONFIG_CRYPTO_BLAKE2S_X86 is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_BLOWFISH_X86_64=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAMELLIA_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST5_AVX_X86_64=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_CAST6_AVX_X86_64=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CHACHA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX_X86_64=m
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m
CONFIG_CRYPTO_SM4=m
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=y
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=y
CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y
# CONFIG_CRYPTO_STATS is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
CONFIG_CRYPTO_DEV_SP_PSP=y
# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set
CONFIG_CRYPTO_DEV_QAT=m
CONFIG_CRYPTO_DEV_QAT_DH895xCC=m
CONFIG_CRYPTO_DEV_QAT_C3XXX=m
CONFIG_CRYPTO_DEV_QAT_C62X=m
# CONFIG_CRYPTO_DEV_QAT_4XXX is not set
CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m
CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m
CONFIG_CRYPTO_DEV_QAT_C62XVF=m
CONFIG_CRYPTO_DEV_NITROX=m
CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m
# CONFIG_CRYPTO_DEV_VIRTIO is not set
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
# CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE is not set
CONFIG_X509_CERTIFICATE_PARSER=y
# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
CONFIG_MODULE_SIG_KEY_TYPE_RSA=y
# CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
# CONFIG_SYSTEM_REVOCATION_LIST is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_CORDIC=m
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LIB_SM4=m
# end of Crypto library routines
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_DECOMPRESS_ZSTD=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# end of Library routines
CONFIG_ASN1_ENCODER=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
CONFIG_DEBUG_INFO_DWARF4=y
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_STACK_VALIDATION=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
# end of Generic Kernel Debugging Instruments
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# end of Networking Debugging
#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=480
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_BOOTTIME_TRACING is not set
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_STACK_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
CONFIG_SCHED_TRACER=y
CONFIG_HWLAT_TRACER=y
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_MMIOTRACE is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_BPF_KPROBE_OVERRIDE is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
CONFIG_FTRACE_MCOUNT_USE_CC=y
CONFIG_TRACING_MAP=y
CONFIG_SYNTH_EVENTS=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACE_EVENT_INJECT is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
# CONFIG_TRACE_EVAL_MAP_FILE is not set
# CONFIG_FTRACE_RECORD_RECURSION is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_FTRACE_SORT_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SYNTH_EVENT_GEN_TEST is not set
# CONFIG_KPROBE_EVENT_GEN_TEST is not set
# CONFIG_HIST_TRIGGERS_DEBUG is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
# CONFIG_IO_STRICT_DEVMEM is not set
#
# x86 Debugging
#
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_EARLY_PRINTK_USB=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_EARLY_PRINTK_USB_XDBC=y
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_X86_DECODER_SELFTEST=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_LKDTM is not set
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_LIVEPATCH is not set
# CONFIG_TEST_STACKINIT is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_HMM is not set
# CONFIG_TEST_FREE_PAGES is not set
# CONFIG_TEST_FPU is not set
# CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# CONFIG_HYPERV_TESTING is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking
[-- Attachment #3: job-script.ksh --]
[-- Type: text/plain, Size: 8191 bytes --]
#!/bin/sh
export_top_env()
{
export suite='stress-ng'
export testcase='stress-ng'
export category='benchmark'
export nr_threads=128
export testtime=60
export job_origin='stress-ng-class-memory.yaml'
export queue_cmdline_keys='branch
commit'
export queue='validate'
export testbox='lkp-icl-2sp6'
export tbox_group='lkp-icl-2sp6'
export kconfig='x86_64-rhel-8.3'
export submit_id='620e7d088eb8ae50a8db9695'
export job_file='/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220218-20648-cts3pb-5.yaml'
export id='b77cd01d9fd42ed946f29ebc423f1989b8a91865'
export queuer_version='/lkp-src'
export model='Ice Lake'
export nr_node=2
export nr_cpu=128
export memory='128G'
export nr_ssd_partitions=3
export nr_hdd_partitions=6
export hdd_partitions='/dev/disk/by-id/ata-WDC_WD20SPZX-08UA7_WD-WXE2EA06X8DA-part*'
export ssd_partitions='/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204002V800RGN-part*'
export rootfs_partition='/dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV634503K8400NGN-part1'
export kernel_cmdline_hw='acpi_rsdp=0x69ffd014'
export brand='Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz'
export need_kconfig=
export commit='237b4454014d3759acc6459eb329c5e3d55113ed'
export ucode='0xd000280'
export bisect_dmesg=true
export enqueue_time='2022-02-18 00:51:21 +0800'
export _id='620e7d228eb8ae50a8db9697'
export _rt='/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed'
export user='lkp'
export compiler='gcc-9'
export LKP_SERVER='internal-lkp-server'
export head_commit='4e080c03d517d19fc72f886e65be8bbcbf0eed7b'
export base_commit='754e0b0e35608ed5206d6a67a791563c631cec07'
export branch='linux-review/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421'
export rootfs='debian-10.4-x86_64-20200603.cgz'
export result_root='/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/3'
export scheduler_version='/lkp/lkp/.src-20220217-223842'
export arch='x86_64'
export max_uptime=2100
export initrd='/osimage/debian/debian-10.4-x86_64-20200603.cgz'
export bootloader_append='root=/dev/ram0
RESULT_ROOT=/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/3
BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d
branch=linux-review/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
job=/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220218-20648-cts3pb-5.yaml
user=lkp
ARCH=x86_64
kconfig=x86_64-rhel-8.3
commit=237b4454014d3759acc6459eb329c5e3d55113ed
acpi_rsdp=0x69ffd014
max_uptime=2100
LKP_SERVER=internal-lkp-server
nokaslr
selinux=0
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw'
export modules_initrd='/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/modules.cgz'
export bm_initrd='/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20220105.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/stress-ng_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/stress-ng-x86_64-0.11-06_20220214.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/mpstat_20200714.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/turbostat_20200721.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/turbostat-x86_64-3.7-4_20200721.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/perf_20220212.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/perf-x86_64-754e0b0e3560-1_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/sar-x86_64-34c92ae-1_20200702.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz'
export ucode_initrd='/osimage/ucode/intel-ucode-20210222.cgz'
export lkp_initrd='/osimage/user/lkp/lkp-x86_64.cgz'
export site='inn'
export LKP_CGI_PORT=80
export LKP_CIFS_PORT=139
export last_kernel='5.17.0-rc4'
export repeat_to=6
export schedule_notify_address=
export kernel='/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d'
export dequeue_time='2022-02-18 00:57:20 +0800'
export job_state='downgrade_ucode'
export job_initrd='/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220218-20648-cts3pb-5.cgz'
[ -n "$LKP_SRC" ] ||
export LKP_SRC=/lkp/${user:-lkp}/src
}
run_job()
{
echo $$ > $TMP/run-job.pid
. $LKP_SRC/lib/http.sh
. $LKP_SRC/lib/job.sh
. $LKP_SRC/lib/env.sh
export_top_env
run_setup $LKP_SRC/setup/cpufreq_governor 'performance'
run_monitor ignored=1 $LKP_SRC/monitors/wrapper oom-killer
run_monitor $LKP_SRC/monitors/wrapper kmsg
run_monitor $LKP_SRC/monitors/no-stdout/wrapper boot-time
run_monitor $LKP_SRC/monitors/wrapper uptime
run_monitor $LKP_SRC/monitors/wrapper iostat
run_monitor $LKP_SRC/monitors/wrapper heartbeat
run_monitor $LKP_SRC/monitors/wrapper vmstat
run_monitor $LKP_SRC/monitors/wrapper numa-numastat
run_monitor $LKP_SRC/monitors/wrapper numa-vmstat
run_monitor $LKP_SRC/monitors/wrapper numa-meminfo
run_monitor $LKP_SRC/monitors/wrapper proc-vmstat
run_monitor $LKP_SRC/monitors/wrapper proc-stat
run_monitor $LKP_SRC/monitors/wrapper meminfo
run_monitor $LKP_SRC/monitors/wrapper slabinfo
run_monitor $LKP_SRC/monitors/wrapper interrupts
run_monitor $LKP_SRC/monitors/wrapper lock_stat
run_monitor lite_mode=1 $LKP_SRC/monitors/wrapper perf-sched
run_monitor $LKP_SRC/monitors/wrapper softirqs
run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping
run_monitor $LKP_SRC/monitors/wrapper diskstats
run_monitor $LKP_SRC/monitors/wrapper nfsstat
run_monitor $LKP_SRC/monitors/wrapper cpuidle
run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats
run_monitor $LKP_SRC/monitors/wrapper turbostat
run_monitor $LKP_SRC/monitors/wrapper sched_debug
run_monitor $LKP_SRC/monitors/wrapper perf-stat
run_monitor $LKP_SRC/monitors/wrapper mpstat
run_monitor debug_mode=0 $LKP_SRC/monitors/no-stdout/wrapper perf-profile
run_monitor $LKP_SRC/monitors/plain/watchdog
run_test class='memory' test='remap' $LKP_SRC/tests/wrapper stress-ng
}
extract_stats()
{
export stats_part_begin=
export stats_part_end=
env class='memory' test='remap' $LKP_SRC/stats/wrapper stress-ng
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper boot-time
$LKP_SRC/stats/wrapper uptime
$LKP_SRC/stats/wrapper iostat
$LKP_SRC/stats/wrapper vmstat
$LKP_SRC/stats/wrapper numa-numastat
$LKP_SRC/stats/wrapper numa-vmstat
$LKP_SRC/stats/wrapper numa-meminfo
$LKP_SRC/stats/wrapper proc-vmstat
$LKP_SRC/stats/wrapper meminfo
$LKP_SRC/stats/wrapper slabinfo
$LKP_SRC/stats/wrapper interrupts
$LKP_SRC/stats/wrapper lock_stat
env lite_mode=1 $LKP_SRC/stats/wrapper perf-sched
$LKP_SRC/stats/wrapper softirqs
$LKP_SRC/stats/wrapper diskstats
$LKP_SRC/stats/wrapper nfsstat
$LKP_SRC/stats/wrapper cpuidle
$LKP_SRC/stats/wrapper turbostat
$LKP_SRC/stats/wrapper sched_debug
$LKP_SRC/stats/wrapper perf-stat
$LKP_SRC/stats/wrapper mpstat
env debug_mode=0 $LKP_SRC/stats/wrapper perf-profile
$LKP_SRC/stats/wrapper time stress-ng.time
$LKP_SRC/stats/wrapper dmesg
$LKP_SRC/stats/wrapper kmsg
$LKP_SRC/stats/wrapper last_state
$LKP_SRC/stats/wrapper stderr
$LKP_SRC/stats/wrapper time
}
"$@"
[-- Attachment #4: job.yaml --]
[-- Type: text/plain, Size: 5504 bytes --]
---
:#! jobs/stress-ng-class-memory.yaml:
suite: stress-ng
testcase: stress-ng
category: benchmark
nr_threads: 100%
testtime: 60s
oom-killer:
ignored: 1
stress-ng:
class: memory
test: remap
job_origin: stress-ng-class-memory.yaml
:#! queue options:
queue_cmdline_keys:
- branch
- commit
queue: bisect
testbox: lkp-icl-2sp6
tbox_group: lkp-icl-2sp6
kconfig: x86_64-rhel-8.3
submit_id: 620e35e68eb8ae2756b1c0e4
job_file: "/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220217-10070-15jk18c-2.yaml"
id: 51b4c9866b2eaa9835471bf94377a7ebf565c17c
queuer_version: "/lkp-src"
:#! hosts/lkp-icl-2sp6:
model: Ice Lake
nr_node: 2
nr_cpu: 128
memory: 128G
nr_ssd_partitions: 3
nr_hdd_partitions: 6
hdd_partitions: "/dev/disk/by-id/ata-WDC_WD20SPZX-08UA7_WD-WXE2EA06X8DA-part*"
ssd_partitions: "/dev/disk/by-id/ata-INTEL_SSDSC2BB800G4_PHWL4204002V800RGN-part*"
rootfs_partition: "/dev/disk/by-id/ata-INTEL_SSDSC2BA400G4_BTHV634503K8400NGN-part1"
kernel_cmdline_hw: acpi_rsdp=0x69ffd014
brand: Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz
:#! include/category/benchmark:
kmsg:
boot-time:
uptime:
iostat:
heartbeat:
vmstat:
numa-numastat:
numa-vmstat:
numa-meminfo:
proc-vmstat:
proc-stat:
meminfo:
slabinfo:
interrupts:
lock_stat:
perf-sched:
lite_mode: 1
softirqs:
bdi_dev_mapping:
diskstats:
nfsstat:
cpuidle:
cpufreq-stats:
turbostat:
sched_debug:
perf-stat:
mpstat:
perf-profile:
debug_mode: 0
:#! include/category/ALL:
cpufreq_governor: performance
:#! include/stress-ng:
need_kconfig:
:#! include/queue/cyclic:
commit: 237b4454014d3759acc6459eb329c5e3d55113ed
:#! include/testbox/lkp-icl-2sp6:
ucode: '0xd000280'
bisect_dmesg: true
enqueue_time: 2022-02-17 19:47:50.818356313 +08:00
_id: 620e3b6c8eb8ae2756b1c0e6
_rt: "/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed"
:#! schedule options:
user: lkp
compiler: gcc-9
LKP_SERVER: internal-lkp-server
head_commit: 4e080c03d517d19fc72f886e65be8bbcbf0eed7b
base_commit: 754e0b0e35608ed5206d6a67a791563c631cec07
branch: linux-devel/devel-hourly-20220215-215339
rootfs: debian-10.4-x86_64-20200603.cgz
result_root: "/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/0"
scheduler_version: "/lkp/lkp/.src-20220217-171907"
arch: x86_64
max_uptime: 2100
initrd: "/osimage/debian/debian-10.4-x86_64-20200603.cgz"
bootloader_append:
- root=/dev/ram0
- RESULT_ROOT=/result/stress-ng/memory-performance-100%-remap-60s-ucode=0xd000280/lkp-icl-2sp6/debian-10.4-x86_64-20200603.cgz/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/0
- BOOT_IMAGE=/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d
- branch=linux-devel/devel-hourly-20220215-215339
- job=/lkp/jobs/scheduled/lkp-icl-2sp6/stress-ng-memory-performance-100%-remap-60s-ucode=0xd000280-debian-10.4-x86_64-20200603.cgz-237b4454014d3759acc6459eb329c5e3d551-20220217-10070-15jk18c-2.yaml
- user=lkp
- ARCH=x86_64
- kconfig=x86_64-rhel-8.3
- commit=237b4454014d3759acc6459eb329c5e3d55113ed
- acpi_rsdp=0x69ffd014
- max_uptime=2100
- LKP_SERVER=internal-lkp-server
- nokaslr
- selinux=0
- debug
- apic=debug
- sysrq_always_enabled
- rcupdate.rcu_cpu_stall_timeout=100
- net.ifnames=0
- printk.devkmsg=on
- panic=-1
- softlockup_panic=1
- nmi_watchdog=panic
- oops=panic
- load_ramdisk=2
- prompt_ramdisk=0
- drbd.minor_count=8
- systemd.log_level=err
- ignore_loglevel
- console=tty0
- earlyprintk=ttyS0,115200
- console=ttyS0,115200
- vga=normal
- rw
modules_initrd: "/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/modules.cgz"
bm_initrd: "/osimage/deps/debian-10.4-x86_64-20200603.cgz/run-ipconfig_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/lkp_20220105.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/rsync-rootfs_20200608.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/stress-ng_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/stress-ng-x86_64-0.11-06_20220214.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/mpstat_20200714.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/turbostat_20200721.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/turbostat-x86_64-3.7-4_20200721.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/perf_20220212.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/perf-x86_64-754e0b0e3560-1_20220214.cgz,/osimage/pkg/debian-10.4-x86_64-20200603.cgz/sar-x86_64-34c92ae-1_20200702.cgz,/osimage/deps/debian-10.4-x86_64-20200603.cgz/hw_20200715.cgz"
ucode_initrd: "/osimage/ucode/intel-ucode-20210222.cgz"
lkp_initrd: "/osimage/user/lkp/lkp-x86_64.cgz"
site: inn
:#! /cephfs/db/releases/20220214184054/lkp-src/include/site/inn:
LKP_CGI_PORT: 80
LKP_CIFS_PORT: 139
watchdog:
:#! runtime status:
last_kernel: 5.9.0-2-amd64
repeat_to: 3
schedule_notify_address:
:#! user overrides:
kernel: "/pkg/linux/x86_64-rhel-8.3/gcc-9/237b4454014d3759acc6459eb329c5e3d55113ed/vmlinuz-5.17.0-rc2-00015-g237b4454014d"
dequeue_time: 2022-02-17 20:16:56.271187361 +08:00
:#! /cephfs/db/releases/20220217171601/lkp-src/include/site/inn:
job_state: finished
loadavg: 51.42 22.96 8.54 1/1158 9664
start_time: '1645100299'
end_time: '1645100361'
version: "/lkp/lkp/.src-20220217-171949:848a26a9:499352d36"
[-- Attachment #5: reproduce.ksh --]
[-- Type: text/plain, Size: 338 bytes --]
for cpu_dir in /sys/devices/system/cpu/cpu[0-9]*
do
online_file="$cpu_dir"/online
[ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue
file="$cpu_dir"/cpufreq/scaling_governor
[ -f "$file" ] && echo "performance" > "$file"
done
"stress-ng" "--timeout" "60" "--times" "--verify" "--metrics-brief" "--remap" "128"
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
2022-02-18 6:35 ` kernel test robot
@ 2022-02-18 8:49 ` Hugh Dickins
-1 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-18 8:49 UTC (permalink / raw)
To: kernel test robot
Cc: Hugh Dickins, 0day robot, Vlastimil Babka, LKML, lkp, ying.huang,
feng.tang, zhengjun.xing, fengwei.yin, Andrew Morton,
Michal Hocko, Kirill A. Shutemov, Matthew Wilcox,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, Hillf Danton, linux-mm
[-- Attachment #1: Type: text/plain, Size: 3716 bytes --]
On Fri, 18 Feb 2022, kernel test robot wrote:
>
>
> Greeting,
>
> FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
>
>
> commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
> url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
> base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
> patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb@google.com
>
> in testcase: stress-ng
> on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
> with following parameters:
>
> nr_threads: 100%
> testtime: 60s
> class: memory
> test: remap
> cpufreq_governor: performance
> ucode: 0xd000280
>
>
>
>
> If you fix the issue, kindly add following tag
> Reported-by: kernel test robot <oliver.sang@intel.com>
>
>
> Details are as below:
> -------------------------------------------------------------------------------------------------->
>
>
> To reproduce:
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> sudo bin/lkp install job.yaml # job file is attached in this email
> bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
> sudo bin/lkp run generated-yaml-file
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
> =========================================================================================
> class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
> memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
>
> commit:
> c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
> 237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
>
> c479426e09c8088d 237b4454014d3759acc6459eb32
> ---------------- ---------------------------
> %stddev %change %stddev
> \ | \
> 109459 -62.5% 41003 ± 2% stress-ng.remap.ops
> 1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
> 2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
> 30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
Thanks a lot for trying it out, I did hope that you would find something.
However, IIUC, this by itself is not very interesting:
the comparison is between c479426e09 (06/13) as base and 237b445401?
237b445401 is 07/13, "Fill in missing pieces", where the series gets
to be correct again, after dropping the old implementation and piecing
together the rest of the new implementation. It's not a surprise that
those tests which need what's added back in 07/13 will get much slower
at this stage. And later 10/13 brings in a pagevec to speed it up.
What would be much more interesting is to treat the series of 13 as one,
and compare the baseline before any of it against the end of the series:
is that something that the 0day robot can easily do?
But I'll look more closely at the numbers you've provided later today,
numbers that I've snipped off here: there may still be useful things to
learn from them; and maybe I'll try following the instructions you've
supplied, though I probably won't do a good job of following them.
Thanks,
Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
@ 2022-02-18 8:49 ` Hugh Dickins
0 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-18 8:49 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 3725 bytes --]
On Fri, 18 Feb 2022, kernel test robot wrote:
>
>
> Greeting,
>
> FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
>
>
> commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
> url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
> base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
> patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb(a)google.com
>
> in testcase: stress-ng
> on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
> with following parameters:
>
> nr_threads: 100%
> testtime: 60s
> class: memory
> test: remap
> cpufreq_governor: performance
> ucode: 0xd000280
>
>
>
>
> If you fix the issue, kindly add following tag
> Reported-by: kernel test robot <oliver.sang@intel.com>
>
>
> Details are as below:
> -------------------------------------------------------------------------------------------------->
>
>
> To reproduce:
>
> git clone https://github.com/intel/lkp-tests.git
> cd lkp-tests
> sudo bin/lkp install job.yaml # job file is attached in this email
> bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
> sudo bin/lkp run generated-yaml-file
>
> # if come across any failure that blocks the test,
> # please remove ~/.lkp and /lkp dir to run from a clean state.
>
> =========================================================================================
> class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
> memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
>
> commit:
> c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
> 237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
>
> c479426e09c8088d 237b4454014d3759acc6459eb32
> ---------------- ---------------------------
> %stddev %change %stddev
> \ | \
> 109459 -62.5% 41003 ± 2% stress-ng.remap.ops
> 1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
> 2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
> 30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
Thanks a lot for trying it out, I did hope that you would find something.
However, IIUC, this by itself is not very interesting:
the comparison is between c479426e09 (06/13) as base and 237b445401?
237b445401 is 07/13, "Fill in missing pieces", where the series gets
to be correct again, after dropping the old implementation and piecing
together the rest of the new implementation. It's not a surprise that
those tests which need what's added back in 07/13 will get much slower
at this stage. And later 10/13 brings in a pagevec to speed it up.
What would be much more interesting is to treat the series of 13 as one,
and compare the baseline before any of it against the end of the series:
is that something that the 0day robot can easily do?
But I'll look more closely at the numbers you've provided later today,
numbers that I've snipped off here: there may still be useful things to
learn from them; and maybe I'll try following the instructions you've
supplied, though I probably won't do a good job of following them.
Thanks,
Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
2022-02-18 8:49 ` Hugh Dickins
@ 2022-02-21 6:32 ` Hugh Dickins
-1 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-21 6:32 UTC (permalink / raw)
To: kernel test robot
Cc: Hugh Dickins, 0day robot, Vlastimil Babka, LKML, lkp, ying.huang,
feng.tang, zhengjun.xing, fengwei.yin, Andrew Morton,
Michal Hocko, Kirill A. Shutemov, Matthew Wilcox,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, Hillf Danton, linux-mm
[-- Attachment #1: Type: text/plain, Size: 6314 bytes --]
On Fri, 18 Feb 2022, Hugh Dickins wrote:
> On Fri, 18 Feb 2022, kernel test robot wrote:
> >
> > Greeting,
> >
> > FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
> >
> >
> > commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
> > url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
> > base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
> > patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb@google.com
> >
> > in testcase: stress-ng
> > on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
> > with following parameters:
> >
> > nr_threads: 100%
> > testtime: 60s
> > class: memory
> > test: remap
> > cpufreq_governor: performance
> > ucode: 0xd000280
> >
> >
> >
> >
> > If you fix the issue, kindly add following tag
> > Reported-by: kernel test robot <oliver.sang@intel.com>
> >
> >
> > Details are as below:
> > -------------------------------------------------------------------------------------------------->
> >
> >
> > To reproduce:
> >
> > git clone https://github.com/intel/lkp-tests.git
> > cd lkp-tests
> > sudo bin/lkp install job.yaml # job file is attached in this email
> > bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
> > sudo bin/lkp run generated-yaml-file
> >
> > # if come across any failure that blocks the test,
> > # please remove ~/.lkp and /lkp dir to run from a clean state.
> >
> > =========================================================================================
> > class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
> > memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
> >
> > commit:
> > c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
> > 237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
> >
> > c479426e09c8088d 237b4454014d3759acc6459eb32
> > ---------------- ---------------------------
> > %stddev %change %stddev
> > \ | \
> > 109459 -62.5% 41003 ± 2% stress-ng.remap.ops
> > 1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
> > 2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
> > 30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
>
> Thanks a lot for trying it out, I did hope that you would find something.
>
> However, IIUC, this by itself is not very interesting:
> the comparison is between c479426e09 (06/13) as base and 237b445401?
> 237b445401 is 07/13, "Fill in missing pieces", where the series gets
> to be correct again, after dropping the old implementation and piecing
> together the rest of the new implementation. It's not a surprise that
> those tests which need what's added back in 07/13 will get much slower
> at this stage. And later 10/13 brings in a pagevec to speed it up.
I probably did not understand correctly: I expect you did try the whole
series at first, found a regression, and then bisected to that commit.
>
> What would be much more interesting is to treat the series of 13 as one,
> and compare the baseline before any of it against the end of the series:
> is that something that the 0day robot can easily do?
That would still be more interesting to me - though probably not
actionable (see below), so not worth you going to any effort. But
I hope the bad result on this test did not curtail further testing.
>
> But I'll look more closely at the numbers you've provided later today,
> numbers that I've snipped off here: there may still be useful things to
> learn from them; and maybe I'll try following the instructions you've
> supplied, though I probably won't do a good job of following them.
I did look more closely, didn't try lkp itself, but did observe
stress-ng --timeout 60 --times --verify --metrics-brief --remap 128
in the reproduce file, and followed that up (but with 8 not 128).
In my config, the series managed about half the ops as the baseline.
Comparison of unevictable_pgs in /proc/vmstat was instructive.
Baseline 5.17-rc: With mm/munlock series applied:
unevictable_pgs_culled 17 53097984
unevictable_pgs_rescued 17 53097984
unevictable_pgs_mlocked 97251331 53097984
unevictable_pgs_munlocked 97251331 53097984
I was very surprised by those low culled/rescued baseline numbers,
but a look at stress-remap-file-pages.c shows that each thread is
repetitively doing mlock of one page, remap_file_pages on that address
(with implicit munlock of old page and mlock of new), munlock of new.
Whereas usually, we don't munlock a range immediately after mlocking it.
The baseline's "if (!isolate_lru_page(page)) putback_lru_page(page);"
technique works very much in its favour on this test: the munlocking
isolates fail because mlock puts the page back on a pagevec, nothing
reaches the unevictable list; whereas the mm/munlock series under test
fastidiously moves each page to unevictable before bringing it back.
This certainly modifies my view of the role of the pagevec, and I
think it indicates that we *may* find a regression in some realistic
workload which demands a smarter approach. I have experimented with
munlock_page() "cancelling" an mlock found earlier on its pagevec;
but I very much doubt that the experimental code is correct yet, it
worked well but not as well as hoped (there are various lru_add_drain()s
which are limiting it), and it's just not a complication I'd like to get
into: unless pushed to do so by a realistic workload.
stress-ng --remap is not that realistic workload (and does
not pretend to be). I'm glad that it has highlighted the issue,
thanks to you, but I don't intend to propose any "fix" for this yet.
Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
@ 2022-02-21 6:32 ` Hugh Dickins
0 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-21 6:32 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 6323 bytes --]
On Fri, 18 Feb 2022, Hugh Dickins wrote:
> On Fri, 18 Feb 2022, kernel test robot wrote:
> >
> > Greeting,
> >
> > FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
> >
> >
> > commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
> > url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
> > base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
> > patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb(a)google.com
> >
> > in testcase: stress-ng
> > on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
> > with following parameters:
> >
> > nr_threads: 100%
> > testtime: 60s
> > class: memory
> > test: remap
> > cpufreq_governor: performance
> > ucode: 0xd000280
> >
> >
> >
> >
> > If you fix the issue, kindly add following tag
> > Reported-by: kernel test robot <oliver.sang@intel.com>
> >
> >
> > Details are as below:
> > -------------------------------------------------------------------------------------------------->
> >
> >
> > To reproduce:
> >
> > git clone https://github.com/intel/lkp-tests.git
> > cd lkp-tests
> > sudo bin/lkp install job.yaml # job file is attached in this email
> > bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
> > sudo bin/lkp run generated-yaml-file
> >
> > # if come across any failure that blocks the test,
> > # please remove ~/.lkp and /lkp dir to run from a clean state.
> >
> > =========================================================================================
> > class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
> > memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
> >
> > commit:
> > c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
> > 237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
> >
> > c479426e09c8088d 237b4454014d3759acc6459eb32
> > ---------------- ---------------------------
> > %stddev %change %stddev
> > \ | \
> > 109459 -62.5% 41003 ± 2% stress-ng.remap.ops
> > 1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
> > 2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
> > 30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
>
> Thanks a lot for trying it out, I did hope that you would find something.
>
> However, IIUC, this by itself is not very interesting:
> the comparison is between c479426e09 (06/13) as base and 237b445401?
> 237b445401 is 07/13, "Fill in missing pieces", where the series gets
> to be correct again, after dropping the old implementation and piecing
> together the rest of the new implementation. It's not a surprise that
> those tests which need what's added back in 07/13 will get much slower
> at this stage. And later 10/13 brings in a pagevec to speed it up.
I probably did not understand correctly: I expect you did try the whole
series at first, found a regression, and then bisected to that commit.
>
> What would be much more interesting is to treat the series of 13 as one,
> and compare the baseline before any of it against the end of the series:
> is that something that the 0day robot can easily do?
That would still be more interesting to me - though probably not
actionable (see below), so not worth you going to any effort. But
I hope the bad result on this test did not curtail further testing.
>
> But I'll look more closely at the numbers you've provided later today,
> numbers that I've snipped off here: there may still be useful things to
> learn from them; and maybe I'll try following the instructions you've
> supplied, though I probably won't do a good job of following them.
I did look more closely, didn't try lkp itself, but did observe
stress-ng --timeout 60 --times --verify --metrics-brief --remap 128
in the reproduce file, and followed that up (but with 8 not 128).
In my config, the series managed about half the ops as the baseline.
Comparison of unevictable_pgs in /proc/vmstat was instructive.
Baseline 5.17-rc: With mm/munlock series applied:
unevictable_pgs_culled 17 53097984
unevictable_pgs_rescued 17 53097984
unevictable_pgs_mlocked 97251331 53097984
unevictable_pgs_munlocked 97251331 53097984
I was very surprised by those low culled/rescued baseline numbers,
but a look at stress-remap-file-pages.c shows that each thread is
repetitively doing mlock of one page, remap_file_pages on that address
(with implicit munlock of old page and mlock of new), munlock of new.
Whereas usually, we don't munlock a range immediately after mlocking it.
The baseline's "if (!isolate_lru_page(page)) putback_lru_page(page);"
technique works very much in its favour on this test: the munlocking
isolates fail because mlock puts the page back on a pagevec, nothing
reaches the unevictable list; whereas the mm/munlock series under test
fastidiously moves each page to unevictable before bringing it back.
This certainly modifies my view of the role of the pagevec, and I
think it indicates that we *may* find a regression in some realistic
workload which demands a smarter approach. I have experimented with
munlock_page() "cancelling" an mlock found earlier on its pagevec;
but I very much doubt that the experimental code is correct yet, it
worked well but not as well as hoped (there are various lru_add_drain()s
which are limiting it), and it's just not a complication I'd like to get
into: unless pushed to do so by a realistic workload.
stress-ng --remap is not that realistic workload (and does
not pretend to be). I'm glad that it has highlighted the issue,
thanks to you, but I don't intend to propose any "fix" for this yet.
Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
2022-02-21 6:32 ` Hugh Dickins
@ 2022-02-24 8:37 ` Oliver Sang
-1 siblings, 0 replies; 29+ messages in thread
From: Oliver Sang @ 2022-02-24 8:37 UTC (permalink / raw)
To: Hugh Dickins
Cc: 0day robot, Vlastimil Babka, LKML, lkp, ying.huang, feng.tang,
zhengjun.xing, fengwei.yin, Andrew Morton, Michal Hocko,
Kirill A. Shutemov, Matthew Wilcox, David Hildenbrand,
Alistair Popple, Johannes Weiner, Rik van Riel,
Suren Baghdasaryan, Yu Zhao, Greg Thelen, Shakeel Butt,
Hillf Danton, linux-mm
hi Hugh,
On Sun, Feb 20, 2022 at 10:32:28PM -0800, Hugh Dickins wrote:
> On Fri, 18 Feb 2022, Hugh Dickins wrote:
> > On Fri, 18 Feb 2022, kernel test robot wrote:
> > >
> > > Greeting,
> > >
> > > FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
> > >
> > >
> > > commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
> > > url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
> > > base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
> > > patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb@google.com
> > >
> > > in testcase: stress-ng
> > > on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
> > > with following parameters:
> > >
> > > nr_threads: 100%
> > > testtime: 60s
> > > class: memory
> > > test: remap
> > > cpufreq_governor: performance
> > > ucode: 0xd000280
> > >
> > >
> > >
> > >
> > > If you fix the issue, kindly add following tag
> > > Reported-by: kernel test robot <oliver.sang@intel.com>
> > >
> > >
> > > Details are as below:
> > > -------------------------------------------------------------------------------------------------->
> > >
> > >
> > > To reproduce:
> > >
> > > git clone https://github.com/intel/lkp-tests.git
> > > cd lkp-tests
> > > sudo bin/lkp install job.yaml # job file is attached in this email
> > > bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
> > > sudo bin/lkp run generated-yaml-file
> > >
> > > # if come across any failure that blocks the test,
> > > # please remove ~/.lkp and /lkp dir to run from a clean state.
> > >
> > > =========================================================================================
> > > class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
> > > memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
> > >
> > > commit:
> > > c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
> > > 237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
> > >
> > > c479426e09c8088d 237b4454014d3759acc6459eb32
> > > ---------------- ---------------------------
> > > %stddev %change %stddev
> > > \ | \
> > > 109459 -62.5% 41003 ± 2% stress-ng.remap.ops
> > > 1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
> > > 2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
> > > 30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
> >
> > Thanks a lot for trying it out, I did hope that you would find something.
> >
> > However, IIUC, this by itself is not very interesting:
> > the comparison is between c479426e09 (06/13) as base and 237b445401?
> > 237b445401 is 07/13, "Fill in missing pieces", where the series gets
> > to be correct again, after dropping the old implementation and piecing
> > together the rest of the new implementation. It's not a surprise that
> > those tests which need what's added back in 07/13 will get much slower
> > at this stage. And later 10/13 brings in a pagevec to speed it up.
>
> I probably did not understand correctly: I expect you did try the whole
> series at first, found a regression, and then bisected to that commit.
yes, that is kind of what we did. we applied your patch series as a new branch:
* 173fe0fca5b75 (linux-review/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421) mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP
* b98339dee777f mm/thp: collapse_file() do try_to_unmap(TTU_BATCH_FLUSH)
* cfe816e96f7fe mm/munlock: page migration needs mlock pagevec drained
* 9e15831f5ebd1 mm/munlock: mlock_page() munlock_page() batch by pagevec
* 351471e7c8eaa mm/munlock: delete smp_mb() from __pagevec_lru_add_fn()
* 84b82ccebbb3c mm/migrate: __unmap_and_move() push good newpage to LRU
* 237b4454014d3 mm/munlock: mlock_pte_range() when mlocking or munlocking
* c479426e09c80 mm/munlock: maintain page->mlock_count while unevictable
* 4165ea7156fc5 mm/munlock: replace clear_page_mlock() by final clearance
* 9208010d4509e mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
* 9886e4a451624 mm/munlock: delete munlock_vma_pages_all(), allow oomreap
* 963d7e1d5ec62 mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE
* b99933d467204 mm/munlock: delete page_mlock() and all its works
* ee28855a54493 perf/x86/intel: Increase max number of the fixed counters
* 0144ba0c5bd31 KVM: x86: use the KVM side max supported fixed counter
* 2145e77fecfb3 perf/x86/intel: Enable PEBS format 5
* 58b2ff2c18b1e perf/core: Allow kernel address filter when not filtering the kernel
* e5524bf1047eb perf/x86/intel/pt: Fix address filter config for 32-bit kernel
* d680ff24e9e14 perf/core: Fix address filter parser for multiple filters
* 1fb85d06ad675 x86: Share definition of __is_canonical_address()
* c243cecb58e39 perf/x86/intel/pt: Relax address filter validation
* 26291c54e111f (tag: v5.17-rc2,
but we actually don't test upon the HEAD of this branch directly. we have some
hourly kernel which contains this branch, then we found regression, and the
bisection finally pointed to 237b4454014d3.
below is some results on this branch:
173fe0fca5b75 mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP 545.56 547.77 562.23 528.83 547.67 550.75
237b4454014d3 mm/munlock: mlock_pte_range() when mlocking or munlocking 681.04 685.94 704.17 647.75 684.73 691.63
c479426e09c80 mm/munlock: maintain page->mlock_count while unevictable 1842.83 1819.69 1875.71 1811.48 1818.57 1772.87
4165ea7156fc5 mm/munlock: replace clear_page_mlock() by final clearance 1324.93 1303.7 1303.47
9208010d4509e mm/munlock: rmap call mlock_vma_page() munlock_vma_page() 1272.6 1301.53 1354.12
963d7e1d5ec62 mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE 16323.56 15509.96 16488.65
26291c54e111f Linux 5.17-rc2 874.04 890.31 849.84
our auto-bisect would check branch HEAD, and in this case, it's still low,
so we made out the report.
>
> >
> > What would be much more interesting is to treat the series of 13 as one,
> > and compare the baseline before any of it against the end of the series:
> > is that something that the 0day robot can easily do?
>
> That would still be more interesting to me - though probably not
> actionable (see below), so not worth you going to any effort. But
> I hope the bad result on this test did not curtail further testing.
it it kind of difficult for us to treat series as one, but we're considering
how to fulfill this. Thanks a lot for suggestions!
and the bad result is not a problem for us :)
>
> >
> > But I'll look more closely at the numbers you've provided later today,
> > numbers that I've snipped off here: there may still be useful things to
> > learn from them; and maybe I'll try following the instructions you've
> > supplied, though I probably won't do a good job of following them.
>
> I did look more closely, didn't try lkp itself, but did observe
> stress-ng --timeout 60 --times --verify --metrics-brief --remap 128
> in the reproduce file, and followed that up (but with 8 not 128).
> In my config, the series managed about half the ops as the baseline.
>
> Comparison of unevictable_pgs in /proc/vmstat was instructive.
> Baseline 5.17-rc: With mm/munlock series applied:
> unevictable_pgs_culled 17 53097984
> unevictable_pgs_rescued 17 53097984
> unevictable_pgs_mlocked 97251331 53097984
> unevictable_pgs_munlocked 97251331 53097984
>
> I was very surprised by those low culled/rescued baseline numbers,
> but a look at stress-remap-file-pages.c shows that each thread is
> repetitively doing mlock of one page, remap_file_pages on that address
> (with implicit munlock of old page and mlock of new), munlock of new.
> Whereas usually, we don't munlock a range immediately after mlocking it.
>
> The baseline's "if (!isolate_lru_page(page)) putback_lru_page(page);"
> technique works very much in its favour on this test: the munlocking
> isolates fail because mlock puts the page back on a pagevec, nothing
> reaches the unevictable list; whereas the mm/munlock series under test
> fastidiously moves each page to unevictable before bringing it back.
>
> This certainly modifies my view of the role of the pagevec, and I
> think it indicates that we *may* find a regression in some realistic
> workload which demands a smarter approach. I have experimented with
> munlock_page() "cancelling" an mlock found earlier on its pagevec;
> but I very much doubt that the experimental code is correct yet, it
> worked well but not as well as hoped (there are various lru_add_drain()s
> which are limiting it), and it's just not a complication I'd like to get
> into: unless pushed to do so by a realistic workload.
>
> stress-ng --remap is not that realistic workload (and does
> not pretend to be). I'm glad that it has highlighted the issue,
> thanks to you, but I don't intend to propose any "fix" for this yet.
Thanks a lot for these details!
not sure if above data on that branch any help?
>
> Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [mm/munlock] 237b445401: stress-ng.remap.ops_per_sec -62.6% regression
@ 2022-02-24 8:37 ` Oliver Sang
0 siblings, 0 replies; 29+ messages in thread
From: Oliver Sang @ 2022-02-24 8:37 UTC (permalink / raw)
To: lkp
[-- Attachment #1: Type: text/plain, Size: 9712 bytes --]
hi Hugh,
On Sun, Feb 20, 2022 at 10:32:28PM -0800, Hugh Dickins wrote:
> On Fri, 18 Feb 2022, Hugh Dickins wrote:
> > On Fri, 18 Feb 2022, kernel test robot wrote:
> > >
> > > Greeting,
> > >
> > > FYI, we noticed a -62.6% regression of stress-ng.remap.ops_per_sec due to commit:
> > >
> > >
> > > commit: 237b4454014d3759acc6459eb329c5e3d55113ed ("[PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking")
> > > url: https://github.com/0day-ci/linux/commits/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421
> > > base: https://git.kernel.org/cgit/linux/kernel/git/tip/tip.git ee28855a54493ce83bc2a3fbe30210be61b57bc7
> > > patch link: https://lore.kernel.org/lkml/d39f6e4d-aa4f-731a-68ee-e77cdbf1d7bb(a)google.com
> > >
> > > in testcase: stress-ng
> > > on test machine: 128 threads 2 sockets Intel(R) Xeon(R) Platinum 8358 CPU @ 2.60GHz with 128G memory
> > > with following parameters:
> > >
> > > nr_threads: 100%
> > > testtime: 60s
> > > class: memory
> > > test: remap
> > > cpufreq_governor: performance
> > > ucode: 0xd000280
> > >
> > >
> > >
> > >
> > > If you fix the issue, kindly add following tag
> > > Reported-by: kernel test robot <oliver.sang@intel.com>
> > >
> > >
> > > Details are as below:
> > > -------------------------------------------------------------------------------------------------->
> > >
> > >
> > > To reproduce:
> > >
> > > git clone https://github.com/intel/lkp-tests.git
> > > cd lkp-tests
> > > sudo bin/lkp install job.yaml # job file is attached in this email
> > > bin/lkp split-job --compatible job.yaml # generate the yaml file for lkp run
> > > sudo bin/lkp run generated-yaml-file
> > >
> > > # if come across any failure that blocks the test,
> > > # please remove ~/.lkp and /lkp dir to run from a clean state.
> > >
> > > =========================================================================================
> > > class/compiler/cpufreq_governor/kconfig/nr_threads/rootfs/tbox_group/test/testcase/testtime/ucode:
> > > memory/gcc-9/performance/x86_64-rhel-8.3/100%/debian-10.4-x86_64-20200603.cgz/lkp-icl-2sp6/remap/stress-ng/60s/0xd000280
> > >
> > > commit:
> > > c479426e09 ("mm/munlock: maintain page->mlock_count while unevictable")
> > > 237b445401 ("mm/munlock: mlock_pte_range() when mlocking or munlocking")
> > >
> > > c479426e09c8088d 237b4454014d3759acc6459eb32
> > > ---------------- ---------------------------
> > > %stddev %change %stddev
> > > \ | \
> > > 109459 -62.5% 41003 ± 2% stress-ng.remap.ops
> > > 1823 -62.6% 682.54 ± 2% stress-ng.remap.ops_per_sec
> > > 2.242e+08 -62.5% 83989157 ± 2% stress-ng.time.minor_page_faults
> > > 30.00 ± 2% -61.2% 11.65 ± 4% stress-ng.time.user_time
> >
> > Thanks a lot for trying it out, I did hope that you would find something.
> >
> > However, IIUC, this by itself is not very interesting:
> > the comparison is between c479426e09 (06/13) as base and 237b445401?
> > 237b445401 is 07/13, "Fill in missing pieces", where the series gets
> > to be correct again, after dropping the old implementation and piecing
> > together the rest of the new implementation. It's not a surprise that
> > those tests which need what's added back in 07/13 will get much slower
> > at this stage. And later 10/13 brings in a pagevec to speed it up.
>
> I probably did not understand correctly: I expect you did try the whole
> series at first, found a regression, and then bisected to that commit.
yes, that is kind of what we did. we applied your patch series as a new branch:
* 173fe0fca5b75 (linux-review/Hugh-Dickins/mm-munlock-rework-of-mlock-munlock-page-handling/20220215-104421) mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP
* b98339dee777f mm/thp: collapse_file() do try_to_unmap(TTU_BATCH_FLUSH)
* cfe816e96f7fe mm/munlock: page migration needs mlock pagevec drained
* 9e15831f5ebd1 mm/munlock: mlock_page() munlock_page() batch by pagevec
* 351471e7c8eaa mm/munlock: delete smp_mb() from __pagevec_lru_add_fn()
* 84b82ccebbb3c mm/migrate: __unmap_and_move() push good newpage to LRU
* 237b4454014d3 mm/munlock: mlock_pte_range() when mlocking or munlocking
* c479426e09c80 mm/munlock: maintain page->mlock_count while unevictable
* 4165ea7156fc5 mm/munlock: replace clear_page_mlock() by final clearance
* 9208010d4509e mm/munlock: rmap call mlock_vma_page() munlock_vma_page()
* 9886e4a451624 mm/munlock: delete munlock_vma_pages_all(), allow oomreap
* 963d7e1d5ec62 mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE
* b99933d467204 mm/munlock: delete page_mlock() and all its works
* ee28855a54493 perf/x86/intel: Increase max number of the fixed counters
* 0144ba0c5bd31 KVM: x86: use the KVM side max supported fixed counter
* 2145e77fecfb3 perf/x86/intel: Enable PEBS format 5
* 58b2ff2c18b1e perf/core: Allow kernel address filter when not filtering the kernel
* e5524bf1047eb perf/x86/intel/pt: Fix address filter config for 32-bit kernel
* d680ff24e9e14 perf/core: Fix address filter parser for multiple filters
* 1fb85d06ad675 x86: Share definition of __is_canonical_address()
* c243cecb58e39 perf/x86/intel/pt: Relax address filter validation
* 26291c54e111f (tag: v5.17-rc2,
but we actually don't test upon the HEAD of this branch directly. we have some
hourly kernel which contains this branch, then we found regression, and the
bisection finally pointed to 237b4454014d3.
below is some results on this branch:
173fe0fca5b75 mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP 545.56 547.77 562.23 528.83 547.67 550.75
237b4454014d3 mm/munlock: mlock_pte_range() when mlocking or munlocking 681.04 685.94 704.17 647.75 684.73 691.63
c479426e09c80 mm/munlock: maintain page->mlock_count while unevictable 1842.83 1819.69 1875.71 1811.48 1818.57 1772.87
4165ea7156fc5 mm/munlock: replace clear_page_mlock() by final clearance 1324.93 1303.7 1303.47
9208010d4509e mm/munlock: rmap call mlock_vma_page() munlock_vma_page() 1272.6 1301.53 1354.12
963d7e1d5ec62 mm/munlock: delete FOLL_MLOCK and FOLL_POPULATE 16323.56 15509.96 16488.65
26291c54e111f Linux 5.17-rc2 874.04 890.31 849.84
our auto-bisect would check branch HEAD, and in this case, it's still low,
so we made out the report.
>
> >
> > What would be much more interesting is to treat the series of 13 as one,
> > and compare the baseline before any of it against the end of the series:
> > is that something that the 0day robot can easily do?
>
> That would still be more interesting to me - though probably not
> actionable (see below), so not worth you going to any effort. But
> I hope the bad result on this test did not curtail further testing.
it it kind of difficult for us to treat series as one, but we're considering
how to fulfill this. Thanks a lot for suggestions!
and the bad result is not a problem for us :)
>
> >
> > But I'll look more closely at the numbers you've provided later today,
> > numbers that I've snipped off here: there may still be useful things to
> > learn from them; and maybe I'll try following the instructions you've
> > supplied, though I probably won't do a good job of following them.
>
> I did look more closely, didn't try lkp itself, but did observe
> stress-ng --timeout 60 --times --verify --metrics-brief --remap 128
> in the reproduce file, and followed that up (but with 8 not 128).
> In my config, the series managed about half the ops as the baseline.
>
> Comparison of unevictable_pgs in /proc/vmstat was instructive.
> Baseline 5.17-rc: With mm/munlock series applied:
> unevictable_pgs_culled 17 53097984
> unevictable_pgs_rescued 17 53097984
> unevictable_pgs_mlocked 97251331 53097984
> unevictable_pgs_munlocked 97251331 53097984
>
> I was very surprised by those low culled/rescued baseline numbers,
> but a look at stress-remap-file-pages.c shows that each thread is
> repetitively doing mlock of one page, remap_file_pages on that address
> (with implicit munlock of old page and mlock of new), munlock of new.
> Whereas usually, we don't munlock a range immediately after mlocking it.
>
> The baseline's "if (!isolate_lru_page(page)) putback_lru_page(page);"
> technique works very much in its favour on this test: the munlocking
> isolates fail because mlock puts the page back on a pagevec, nothing
> reaches the unevictable list; whereas the mm/munlock series under test
> fastidiously moves each page to unevictable before bringing it back.
>
> This certainly modifies my view of the role of the pagevec, and I
> think it indicates that we *may* find a regression in some realistic
> workload which demands a smarter approach. I have experimented with
> munlock_page() "cancelling" an mlock found earlier on its pagevec;
> but I very much doubt that the experimental code is correct yet, it
> worked well but not as well as hoped (there are various lru_add_drain()s
> which are limiting it), and it's just not a complication I'd like to get
> into: unless pushed to do so by a realistic workload.
>
> stress-ng --remap is not that realistic workload (and does
> not pretend to be). I'm glad that it has highlighted the issue,
> thanks to you, but I don't intend to propose any "fix" for this yet.
Thanks a lot for these details!
not sure if above data on that branch any help?
>
> Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH v2 08/13] mm/migrate: __unmap_and_move() push good newpage to LRU
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (6 preceding siblings ...)
2022-02-15 2:31 ` [PATCH v2 07/13] mm/munlock: mlock_pte_range() when mlocking or munlocking Hugh Dickins
@ 2022-02-15 2:33 ` Hugh Dickins
2022-02-15 2:34 ` [PATCH v2 09/13] mm/munlock: delete smp_mb() from __pagevec_lru_add_fn() Hugh Dickins
` (5 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:33 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
Compaction, NUMA page movement, THP collapse/split, and memory failure
do isolate unevictable pages from their "LRU", losing the record of
mlock_count in doing so (isolators are likely to use page->lru for their
own private lists, so mlock_count has to be presumed lost).
That's unfortunate, and we should put in some work to correct that: one
can imagine a function to build up the mlock_count again - but it would
require i_mmap_rwsem for read, so be careful where it's called. Or
page_referenced_one() and try_to_unmap_one() might do that extra work.
But one place that can very easily be improved is page migration's
__unmap_and_move(): a small adjustment to where the successful new page
is put back on LRU, and its mlock_count (if any) is built back up by
remove_migration_ptes().
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: same as v1.
mm/migrate.c | 31 +++++++++++++++++++------------
1 file changed, 19 insertions(+), 12 deletions(-)
diff --git a/mm/migrate.c b/mm/migrate.c
index 7c4223ce2500..f4bcf1541b62 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1032,6 +1032,21 @@ static int __unmap_and_move(struct page *page, struct page *newpage,
if (!page_mapped(page))
rc = move_to_new_page(newpage, page, mode);
+ /*
+ * When successful, push newpage to LRU immediately: so that if it
+ * turns out to be an mlocked page, remove_migration_ptes() will
+ * automatically build up the correct newpage->mlock_count for it.
+ *
+ * We would like to do something similar for the old page, when
+ * unsuccessful, and other cases when a page has been temporarily
+ * isolated from the unevictable LRU: but this case is the easiest.
+ */
+ if (rc == MIGRATEPAGE_SUCCESS) {
+ lru_cache_add(newpage);
+ if (page_was_mapped)
+ lru_add_drain();
+ }
+
if (page_was_mapped)
remove_migration_ptes(page,
rc == MIGRATEPAGE_SUCCESS ? newpage : page, false);
@@ -1045,20 +1060,12 @@ static int __unmap_and_move(struct page *page, struct page *newpage,
unlock_page(page);
out:
/*
- * If migration is successful, decrease refcount of the newpage
+ * If migration is successful, decrease refcount of the newpage,
* which will not free the page because new page owner increased
- * refcounter. As well, if it is LRU page, add the page to LRU
- * list in here. Use the old state of the isolated source page to
- * determine if we migrated a LRU page. newpage was already unlocked
- * and possibly modified by its owner - don't rely on the page
- * state.
+ * refcounter.
*/
- if (rc == MIGRATEPAGE_SUCCESS) {
- if (unlikely(!is_lru))
- put_page(newpage);
- else
- putback_lru_page(newpage);
- }
+ if (rc == MIGRATEPAGE_SUCCESS)
+ put_page(newpage);
return rc;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 09/13] mm/munlock: delete smp_mb() from __pagevec_lru_add_fn()
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (7 preceding siblings ...)
2022-02-15 2:33 ` [PATCH v2 08/13] mm/migrate: __unmap_and_move() push good newpage to LRU Hugh Dickins
@ 2022-02-15 2:34 ` Hugh Dickins
2022-02-15 2:37 ` [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec Hugh Dickins
` (4 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:34 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
My reading of comment on smp_mb__after_atomic() in __pagevec_lru_add_fn()
says that it can now be deleted; and that remains so when the next patch
is added.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: same as v1.
mm/swap.c | 37 +++++++++----------------------------
1 file changed, 9 insertions(+), 28 deletions(-)
diff --git a/mm/swap.c b/mm/swap.c
index 682a03301a2c..3f770b1ea2c1 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -1025,37 +1025,18 @@ static void __pagevec_lru_add_fn(struct folio *folio, struct lruvec *lruvec)
VM_BUG_ON_FOLIO(folio_test_lru(folio), folio);
+ folio_set_lru(folio);
/*
- * A folio becomes evictable in two ways:
- * 1) Within LRU lock [munlock_vma_page() and __munlock_pagevec()].
- * 2) Before acquiring LRU lock to put the folio on the correct LRU
- * and then
- * a) do PageLRU check with lock [check_move_unevictable_pages]
- * b) do PageLRU check before lock [clear_page_mlock]
- *
- * (1) & (2a) are ok as LRU lock will serialize them. For (2b), we need
- * following strict ordering:
- *
- * #0: __pagevec_lru_add_fn #1: clear_page_mlock
- *
- * folio_set_lru() folio_test_clear_mlocked()
- * smp_mb() // explicit ordering // above provides strict
- * // ordering
- * folio_test_mlocked() folio_test_lru()
+ * Is an smp_mb__after_atomic() still required here, before
+ * folio_evictable() tests PageMlocked, to rule out the possibility
+ * of stranding an evictable folio on an unevictable LRU? I think
+ * not, because munlock_page() only clears PageMlocked while the LRU
+ * lock is held.
*
- *
- * if '#1' does not observe setting of PG_lru by '#0' and
- * fails isolation, the explicit barrier will make sure that
- * folio_evictable check will put the folio on the correct
- * LRU. Without smp_mb(), folio_set_lru() can be reordered
- * after folio_test_mlocked() check and can make '#1' fail the
- * isolation of the folio whose mlocked bit is cleared (#0 is
- * also looking at the same folio) and the evictable folio will
- * be stranded on an unevictable LRU.
+ * (That is not true of __page_cache_release(), and not necessarily
+ * true of release_pages(): but those only clear PageMlocked after
+ * put_page_testzero() has excluded any other users of the page.)
*/
- folio_set_lru(folio);
- smp_mb__after_atomic();
-
if (folio_evictable(folio)) {
if (was_unevictable)
__count_vm_events(UNEVICTABLE_PGRESCUED, nr_pages);
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (8 preceding siblings ...)
2022-02-15 2:34 ` [PATCH v2 09/13] mm/munlock: delete smp_mb() from __pagevec_lru_add_fn() Hugh Dickins
@ 2022-02-15 2:37 ` Hugh Dickins
2022-02-15 16:40 ` Matthew Wilcox
2022-02-15 2:38 ` [PATCH v2 11/13] mm/munlock: page migration needs mlock pagevec drained Hugh Dickins
` (3 subsequent siblings)
13 siblings, 1 reply; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:37 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, Yang Li, SeongJae Park,
Geert Uytterhoeven, linux-kernel, linux-mm
A weakness of the page->mlock_count approach is the need for lruvec lock
while holding page table lock. That is not an overhead we would allow on
normal pages, but I think acceptable just for pages in an mlocked area.
But let's try to amortize the extra cost by gathering on per-cpu pagevec
before acquiring the lruvec lock.
I have an unverified conjecture that the mlock pagevec might work out
well for delaying the mlock processing of new file pages until they have
got off lru_cache_add()'s pagevec and on to LRU.
The initialization of page->mlock_count is subject to races and awkward:
0 or !!PageMlocked or 1? Was it wrong even in the implementation before
this commit, which just widens the window? I haven't gone back to think
it through. Maybe someone can point out a better way to initialize it.
Bringing lru_cache_add_inactive_or_unevictable()'s mlock initialization
into mm/mlock.c has helped: mlock_new_page(), using the mlock pagevec,
rather than lru_cache_add()'s pagevec.
Experimented with various orderings: the right thing seems to be for
mlock_page() and mlock_new_page() to TestSetPageMlocked before adding to
pagevec, but munlock_page() to leave TestClearPageMlocked to the later
pagevec processing.
Dropped the VM_BUG_ON_PAGE(PageTail)s this time around: they have made
their point, and the thp_nr_page()s already contain a VM_BUG_ON_PGFLAGS()
for that.
This still leaves acquiring lruvec locks under page table lock each time
the pagevec fills (or a THP is added): which I suppose is rather silly,
since they sit on pagevec waiting to be processed long after page table
lock has been dropped; but I'm disinclined to uglify the calling sequence
until some load shows an actual problem with it (nothing wrong with
taking lruvec lock under page table lock, just "nicer" to do it less).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: Fix kerneldoc on mlock_page() and two more functions, per Yang Li.
Fix build without CONFIG_MMU, per SeongJae, Geert, Naresh, lkp.
mm/internal.h | 9 ++-
mm/mlock.c | 212 ++++++++++++++++++++++++++++++++++++++++++--------
mm/swap.c | 27 ++++---
3 files changed, 201 insertions(+), 47 deletions(-)
diff --git a/mm/internal.h b/mm/internal.h
index b3f0dd3ffba2..18af980bb1b8 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -402,7 +402,8 @@ extern int mlock_future_check(struct mm_struct *mm, unsigned long flags,
*
* mlock is usually called at the end of page_add_*_rmap(),
* munlock at the end of page_remove_rmap(); but new anon
- * pages are managed in lru_cache_add_inactive_or_unevictable().
+ * pages are managed by lru_cache_add_inactive_or_unevictable()
+ * calling mlock_new_page().
*
* @compound is used to include pmd mappings of THPs, but filter out
* pte mappings of THPs, which cannot be consistently counted: a pte
@@ -425,6 +426,9 @@ static inline void munlock_vma_page(struct page *page,
(compound || !PageTransCompound(page)))
munlock_page(page);
}
+void mlock_new_page(struct page *page);
+bool need_mlock_page_drain(int cpu);
+void mlock_page_drain(int cpu);
extern pmd_t maybe_pmd_mkwrite(pmd_t pmd, struct vm_area_struct *vma);
@@ -503,6 +507,9 @@ static inline void mlock_vma_page(struct page *page,
struct vm_area_struct *vma, bool compound) { }
static inline void munlock_vma_page(struct page *page,
struct vm_area_struct *vma, bool compound) { }
+static inline void mlock_new_page(struct page *page) { }
+static inline bool need_mlock_page_drain(int cpu) { return false; }
+static inline void mlock_page_drain(int cpu) { }
static inline void vunmap_range_noflush(unsigned long start, unsigned long end)
{
}
diff --git a/mm/mlock.c b/mm/mlock.c
index 581ea8bf1b83..93d616ba3e22 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -28,6 +28,8 @@
#include "internal.h"
+static DEFINE_PER_CPU(struct pagevec, mlock_pvec);
+
bool can_do_mlock(void)
{
if (rlimit(RLIMIT_MEMLOCK) != 0)
@@ -49,57 +51,79 @@ EXPORT_SYMBOL(can_do_mlock);
* PageUnevictable is set to indicate the unevictable state.
*/
-/**
- * mlock_page - mlock a page
- * @page: page to be mlocked, either a normal page or a THP head.
- */
-void mlock_page(struct page *page)
+static struct lruvec *__mlock_page(struct page *page, struct lruvec *lruvec)
{
- struct lruvec *lruvec;
- int nr_pages = thp_nr_pages(page);
+ /* There is nothing more we can do while it's off LRU */
+ if (!TestClearPageLRU(page))
+ return lruvec;
- VM_BUG_ON_PAGE(PageTail(page), page);
+ lruvec = folio_lruvec_relock_irq(page_folio(page), lruvec);
- if (!TestSetPageMlocked(page)) {
- mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
- __count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
+ if (unlikely(page_evictable(page))) {
+ /*
+ * This is a little surprising, but quite possible:
+ * PageMlocked must have got cleared already by another CPU.
+ * Could this page be on the Unevictable LRU? I'm not sure,
+ * but move it now if so.
+ */
+ if (PageUnevictable(page)) {
+ del_page_from_lru_list(page, lruvec);
+ ClearPageUnevictable(page);
+ add_page_to_lru_list(page, lruvec);
+ __count_vm_events(UNEVICTABLE_PGRESCUED,
+ thp_nr_pages(page));
+ }
+ goto out;
}
- /* There is nothing more we can do while it's off LRU */
- if (!TestClearPageLRU(page))
- return;
-
- lruvec = folio_lruvec_lock_irq(page_folio(page));
if (PageUnevictable(page)) {
- page->mlock_count++;
+ if (PageMlocked(page))
+ page->mlock_count++;
goto out;
}
del_page_from_lru_list(page, lruvec);
ClearPageActive(page);
SetPageUnevictable(page);
- page->mlock_count = 1;
+ page->mlock_count = !!PageMlocked(page);
add_page_to_lru_list(page, lruvec);
- __count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
+ __count_vm_events(UNEVICTABLE_PGCULLED, thp_nr_pages(page));
out:
SetPageLRU(page);
- unlock_page_lruvec_irq(lruvec);
+ return lruvec;
}
-/**
- * munlock_page - munlock a page
- * @page: page to be munlocked, either a normal page or a THP head.
- */
-void munlock_page(struct page *page)
+static struct lruvec *__mlock_new_page(struct page *page, struct lruvec *lruvec)
+{
+ VM_BUG_ON_PAGE(PageLRU(page), page);
+
+ lruvec = folio_lruvec_relock_irq(page_folio(page), lruvec);
+
+ /* As above, this is a little surprising, but possible */
+ if (unlikely(page_evictable(page)))
+ goto out;
+
+ SetPageUnevictable(page);
+ page->mlock_count = !!PageMlocked(page);
+ __count_vm_events(UNEVICTABLE_PGCULLED, thp_nr_pages(page));
+out:
+ add_page_to_lru_list(page, lruvec);
+ SetPageLRU(page);
+ return lruvec;
+}
+
+static struct lruvec *__munlock_page(struct page *page, struct lruvec *lruvec)
{
- struct lruvec *lruvec;
int nr_pages = thp_nr_pages(page);
+ bool isolated = false;
- VM_BUG_ON_PAGE(PageTail(page), page);
+ if (!TestClearPageLRU(page))
+ goto munlock;
- lock_page_memcg(page);
- lruvec = folio_lruvec_lock_irq(page_folio(page));
- if (PageLRU(page) && PageUnevictable(page)) {
+ isolated = true;
+ lruvec = folio_lruvec_relock_irq(page_folio(page), lruvec);
+
+ if (PageUnevictable(page)) {
/* Then mlock_count is maintained, but might undercount */
if (page->mlock_count)
page->mlock_count--;
@@ -108,24 +132,144 @@ void munlock_page(struct page *page)
}
/* else assume that was the last mlock: reclaim will fix it if not */
+munlock:
if (TestClearPageMlocked(page)) {
__mod_zone_page_state(page_zone(page), NR_MLOCK, -nr_pages);
- if (PageLRU(page) || !PageUnevictable(page))
+ if (isolated || !PageUnevictable(page))
__count_vm_events(UNEVICTABLE_PGMUNLOCKED, nr_pages);
else
__count_vm_events(UNEVICTABLE_PGSTRANDED, nr_pages);
}
/* page_evictable() has to be checked *after* clearing Mlocked */
- if (PageLRU(page) && PageUnevictable(page) && page_evictable(page)) {
+ if (isolated && PageUnevictable(page) && page_evictable(page)) {
del_page_from_lru_list(page, lruvec);
ClearPageUnevictable(page);
add_page_to_lru_list(page, lruvec);
__count_vm_events(UNEVICTABLE_PGRESCUED, nr_pages);
}
out:
- unlock_page_lruvec_irq(lruvec);
- unlock_page_memcg(page);
+ if (isolated)
+ SetPageLRU(page);
+ return lruvec;
+}
+
+/*
+ * Flags held in the low bits of a struct page pointer on the mlock_pvec.
+ */
+#define LRU_PAGE 0x1
+#define NEW_PAGE 0x2
+#define mlock_lru(page) ((struct page *)((unsigned long)page + LRU_PAGE))
+#define mlock_new(page) ((struct page *)((unsigned long)page + NEW_PAGE))
+
+/*
+ * mlock_pagevec() is derived from pagevec_lru_move_fn():
+ * perhaps that can make use of such page pointer flags in future,
+ * but for now just keep it for mlock. We could use three separate
+ * pagevecs instead, but one feels better (munlocking a full pagevec
+ * does not need to drain mlocking pagevecs first).
+ */
+static void mlock_pagevec(struct pagevec *pvec)
+{
+ struct lruvec *lruvec = NULL;
+ unsigned long mlock;
+ struct page *page;
+ int i;
+
+ for (i = 0; i < pagevec_count(pvec); i++) {
+ page = pvec->pages[i];
+ mlock = (unsigned long)page & (LRU_PAGE | NEW_PAGE);
+ page = (struct page *)((unsigned long)page - mlock);
+ pvec->pages[i] = page;
+
+ if (mlock & LRU_PAGE)
+ lruvec = __mlock_page(page, lruvec);
+ else if (mlock & NEW_PAGE)
+ lruvec = __mlock_new_page(page, lruvec);
+ else
+ lruvec = __munlock_page(page, lruvec);
+ }
+
+ if (lruvec)
+ unlock_page_lruvec_irq(lruvec);
+ release_pages(pvec->pages, pvec->nr);
+ pagevec_reinit(pvec);
+}
+
+void mlock_page_drain(int cpu)
+{
+ struct pagevec *pvec;
+
+ pvec = &per_cpu(mlock_pvec, cpu);
+ if (pagevec_count(pvec))
+ mlock_pagevec(pvec);
+}
+
+bool need_mlock_page_drain(int cpu)
+{
+ return pagevec_count(&per_cpu(mlock_pvec, cpu));
+}
+
+/**
+ * mlock_page - mlock a page already on (or temporarily off) LRU
+ * @page: page to be mlocked, either a normal page or a THP head.
+ */
+void mlock_page(struct page *page)
+{
+ struct pagevec *pvec = &get_cpu_var(mlock_pvec);
+
+ if (!TestSetPageMlocked(page)) {
+ int nr_pages = thp_nr_pages(page);
+
+ mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
+ __count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
+ }
+
+ get_page(page);
+ if (!pagevec_add(pvec, mlock_lru(page)) ||
+ PageHead(page) || lru_cache_disabled())
+ mlock_pagevec(pvec);
+ put_cpu_var(mlock_pvec);
+}
+
+/**
+ * mlock_new_page - mlock a newly allocated page not yet on LRU
+ * @page: page to be mlocked, either a normal page or a THP head.
+ */
+void mlock_new_page(struct page *page)
+{
+ struct pagevec *pvec = &get_cpu_var(mlock_pvec);
+ int nr_pages = thp_nr_pages(page);
+
+ SetPageMlocked(page);
+ mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
+ __count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
+
+ get_page(page);
+ if (!pagevec_add(pvec, mlock_new(page)) ||
+ PageHead(page) || lru_cache_disabled())
+ mlock_pagevec(pvec);
+ put_cpu_var(mlock_pvec);
+}
+
+/**
+ * munlock_page - munlock a page
+ * @page: page to be munlocked, either a normal page or a THP head.
+ */
+void munlock_page(struct page *page)
+{
+ struct pagevec *pvec = &get_cpu_var(mlock_pvec);
+
+ /*
+ * TestClearPageMlocked(page) must be left to __munlock_page(),
+ * which will check whether the page is multiply mlocked.
+ */
+
+ get_page(page);
+ if (!pagevec_add(pvec, page) ||
+ PageHead(page) || lru_cache_disabled())
+ mlock_pagevec(pvec);
+ put_cpu_var(mlock_pvec);
}
static int mlock_pte_range(pmd_t *pmd, unsigned long addr,
diff --git a/mm/swap.c b/mm/swap.c
index 3f770b1ea2c1..842d5cd92cf6 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -490,18 +490,12 @@ EXPORT_SYMBOL(folio_add_lru);
void lru_cache_add_inactive_or_unevictable(struct page *page,
struct vm_area_struct *vma)
{
- bool unevictable;
-
VM_BUG_ON_PAGE(PageLRU(page), page);
- unevictable = (vma->vm_flags & (VM_LOCKED | VM_SPECIAL)) == VM_LOCKED;
- if (unlikely(unevictable) && !TestSetPageMlocked(page)) {
- int nr_pages = thp_nr_pages(page);
-
- mod_zone_page_state(page_zone(page), NR_MLOCK, nr_pages);
- count_vm_events(UNEVICTABLE_PGMLOCKED, nr_pages);
- }
- lru_cache_add(page);
+ if (unlikely((vma->vm_flags & (VM_LOCKED | VM_SPECIAL)) == VM_LOCKED))
+ mlock_new_page(page);
+ else
+ lru_cache_add(page);
}
/*
@@ -640,6 +634,7 @@ void lru_add_drain_cpu(int cpu)
pagevec_lru_move_fn(pvec, lru_lazyfree_fn);
activate_page_drain(cpu);
+ mlock_page_drain(cpu);
}
/**
@@ -842,6 +837,7 @@ inline void __lru_add_drain_all(bool force_all_cpus)
pagevec_count(&per_cpu(lru_pvecs.lru_deactivate, cpu)) ||
pagevec_count(&per_cpu(lru_pvecs.lru_lazyfree, cpu)) ||
need_activate_page_drain(cpu) ||
+ need_mlock_page_drain(cpu) ||
has_bh_in_lru(cpu, NULL)) {
INIT_WORK(work, lru_add_drain_per_cpu);
queue_work_on(cpu, mm_percpu_wq, work);
@@ -1030,7 +1026,7 @@ static void __pagevec_lru_add_fn(struct folio *folio, struct lruvec *lruvec)
* Is an smp_mb__after_atomic() still required here, before
* folio_evictable() tests PageMlocked, to rule out the possibility
* of stranding an evictable folio on an unevictable LRU? I think
- * not, because munlock_page() only clears PageMlocked while the LRU
+ * not, because __munlock_page() only clears PageMlocked while the LRU
* lock is held.
*
* (That is not true of __page_cache_release(), and not necessarily
@@ -1043,7 +1039,14 @@ static void __pagevec_lru_add_fn(struct folio *folio, struct lruvec *lruvec)
} else {
folio_clear_active(folio);
folio_set_unevictable(folio);
- folio->mlock_count = !!folio_test_mlocked(folio);
+ /*
+ * folio->mlock_count = !!folio_test_mlocked(folio)?
+ * But that leaves __mlock_page() in doubt whether another
+ * actor has already counted the mlock or not. Err on the
+ * safe side, underestimate, let page reclaim fix it, rather
+ * than leaving a page on the unevictable LRU indefinitely.
+ */
+ folio->mlock_count = 0;
if (!was_unevictable)
__count_vm_events(UNEVICTABLE_PGCULLED, nr_pages);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec
2022-02-15 2:37 ` [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec Hugh Dickins
@ 2022-02-15 16:40 ` Matthew Wilcox
2022-02-15 21:02 ` Hugh Dickins
0 siblings, 1 reply; 29+ messages in thread
From: Matthew Wilcox @ 2022-02-15 16:40 UTC (permalink / raw)
To: Hugh Dickins
Cc: Andrew Morton, Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, Yang Li, SeongJae Park, Geert Uytterhoeven,
linux-kernel, linux-mm
On Mon, Feb 14, 2022 at 06:37:29PM -0800, Hugh Dickins wrote:
> +/*
> + * Flags held in the low bits of a struct page pointer on the mlock_pvec.
> + */
> +#define LRU_PAGE 0x1
> +#define NEW_PAGE 0x2
> +#define mlock_lru(page) ((struct page *)((unsigned long)page + LRU_PAGE))
> +#define mlock_new(page) ((struct page *)((unsigned long)page + NEW_PAGE))
You've tripped over one of the weirdnesses in the C preprocessor here.
If the variable passed is not _named_ page, it gets cast to a pointer
to a struct of the same name as the variable. There's no way to tell
cpp that that 'page' after 'struct' is literal and not to be replaced
by the 'page' argument.
I'm going to change this to:
static inline struct page *mlock_lru(struct page *page)
{
return (struct page *)((unsigned long)page + LRU_PAGE);
}
(mutatis mutandi for mlock_new)
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec
2022-02-15 16:40 ` Matthew Wilcox
@ 2022-02-15 21:02 ` Hugh Dickins
2022-02-15 22:56 ` Matthew Wilcox
0 siblings, 1 reply; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 21:02 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Hugh Dickins, Andrew Morton, Michal Hocko, Vlastimil Babka,
Kirill A. Shutemov, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, Yang Li, SeongJae Park,
Geert Uytterhoeven, linux-kernel, linux-mm
On Tue, 15 Feb 2022, Matthew Wilcox wrote:
> On Mon, Feb 14, 2022 at 06:37:29PM -0800, Hugh Dickins wrote:
> > +/*
> > + * Flags held in the low bits of a struct page pointer on the mlock_pvec.
> > + */
> > +#define LRU_PAGE 0x1
> > +#define NEW_PAGE 0x2
> > +#define mlock_lru(page) ((struct page *)((unsigned long)page + LRU_PAGE))
> > +#define mlock_new(page) ((struct page *)((unsigned long)page + NEW_PAGE))
>
> You've tripped over one of the weirdnesses in the C preprocessor here.
> If the variable passed is not _named_ page, it gets cast to a pointer
> to a struct of the same name as the variable. There's no way to tell
> cpp that that 'page' after 'struct' is literal and not to be replaced
> by the 'page' argument.
>
> I'm going to change this to:
>
> static inline struct page *mlock_lru(struct page *page)
> {
> return (struct page *)((unsigned long)page + LRU_PAGE);
> }
>
> (mutatis mutandi for mlock_new)
Okay, thanks. (You're not naming your folio "page" :-?)
Hugh
^ permalink raw reply [flat|nested] 29+ messages in thread* Re: [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec
2022-02-15 21:02 ` Hugh Dickins
@ 2022-02-15 22:56 ` Matthew Wilcox
0 siblings, 0 replies; 29+ messages in thread
From: Matthew Wilcox @ 2022-02-15 22:56 UTC (permalink / raw)
To: Hugh Dickins
Cc: Andrew Morton, Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, Yang Li, SeongJae Park, Geert Uytterhoeven,
linux-kernel, linux-mm
On Tue, Feb 15, 2022 at 01:02:30PM -0800, Hugh Dickins wrote:
> On Tue, 15 Feb 2022, Matthew Wilcox wrote:
> > > +#define mlock_new(page) ((struct page *)((unsigned long)page + NEW_PAGE))
> >
> > I'm going to change this to:
> >
> > static inline struct page *mlock_lru(struct page *page)
> > {
> > return (struct page *)((unsigned long)page + LRU_PAGE);
> > }
> >
> > (mutatis mutandi for mlock_new)
>
> Okay, thanks. (You're not naming your folio "page" :-?)
Worse, I tried passing it '&folio->page'. That produced some ...
interesting compiler error messages.
^ permalink raw reply [flat|nested] 29+ messages in thread
* [PATCH v2 11/13] mm/munlock: page migration needs mlock pagevec drained
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (9 preceding siblings ...)
2022-02-15 2:37 ` [PATCH v2 10/13] mm/munlock: mlock_page() munlock_page() batch by pagevec Hugh Dickins
@ 2022-02-15 2:38 ` Hugh Dickins
2022-02-15 2:40 ` [PATCH v2 12/13] mm/thp: collapse_file() do try_to_unmap(TTU_BATCH_FLUSH) Hugh Dickins
` (2 subsequent siblings)
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:38 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
Page migration of a VM_LOCKED page tends to fail, because when the old
page is unmapped, it is put on the mlock pagevec with raised refcount,
which then fails the freeze.
At first I thought this would be fixed by a local mlock_page_drain() at
the upper rmap_walk() level - which would have nicely batched all the
munlocks of that page; but tests show that the task can too easily move
to another cpu, leaving pagevec residue behind which fails the migration.
So try_to_migrate_one() drain the local pagevec after page_remove_rmap()
from a VM_LOCKED vma; and do the same in try_to_unmap_one(), whose
TTU_IGNORE_MLOCK users would want the same treatment; and do the same
in remove_migration_pte() - not important when successfully inserting
a new page, but necessary when hoping to retry after failure.
Any new pagevec runs the risk of adding a new way of stranding, and we
might discover other corners where mlock_page_drain() or lru_add_drain()
would now help.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
---
v2: Delete suggestion of sysctl from changelog, per Vlastimil.
mm/migrate.c | 2 ++
mm/rmap.c | 4 ++++
2 files changed, 6 insertions(+)
diff --git a/mm/migrate.c b/mm/migrate.c
index f4bcf1541b62..e7d0b68d5dcb 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -251,6 +251,8 @@ static bool remove_migration_pte(struct page *page, struct vm_area_struct *vma,
page_add_file_rmap(new, vma, false);
set_pte_at(vma->vm_mm, pvmw.address, pvmw.pte, pte);
}
+ if (vma->vm_flags & VM_LOCKED)
+ mlock_page_drain(smp_processor_id());
/* No need to invalidate - it was non-present before */
update_mmu_cache(vma, pvmw.address, pvmw.pte);
diff --git a/mm/rmap.c b/mm/rmap.c
index 5442a5c97a85..714bfdc72c7b 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1656,6 +1656,8 @@ static bool try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
* See Documentation/vm/mmu_notifier.rst
*/
page_remove_rmap(subpage, vma, PageHuge(page));
+ if (vma->vm_flags & VM_LOCKED)
+ mlock_page_drain(smp_processor_id());
put_page(page);
}
@@ -1930,6 +1932,8 @@ static bool try_to_migrate_one(struct page *page, struct vm_area_struct *vma,
* See Documentation/vm/mmu_notifier.rst
*/
page_remove_rmap(subpage, vma, PageHuge(page));
+ if (vma->vm_flags & VM_LOCKED)
+ mlock_page_drain(smp_processor_id());
put_page(page);
}
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 12/13] mm/thp: collapse_file() do try_to_unmap(TTU_BATCH_FLUSH)
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (10 preceding siblings ...)
2022-02-15 2:38 ` [PATCH v2 11/13] mm/munlock: page migration needs mlock pagevec drained Hugh Dickins
@ 2022-02-15 2:40 ` Hugh Dickins
2022-02-15 2:42 ` [PATCH v2 13/13] mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP Hugh Dickins
2022-02-15 19:35 ` [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Matthew Wilcox
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:40 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
collapse_file() is using unmap_mapping_pages(1) on each small page found
mapped, unlike others (reclaim, migration, splitting, memory-failure) who
use try_to_unmap(). There are four advantages to try_to_unmap(): first,
its TTU_IGNORE_MLOCK option now avoids leaving mlocked page in pagevec;
second, its vma lookup uses i_mmap_lock_read() not i_mmap_lock_write();
third, it breaks out early if page is not mapped everywhere it might be;
fourth, its TTU_BATCH_FLUSH option can be used, as in page reclaim, to
save up all the TLB flushing until all of the pages have been unmapped.
Wild guess: perhaps it was originally written to use try_to_unmap(),
but hit the VM_BUG_ON_PAGE(page_mapped) after unmapping, because without
TTU_SYNC it may skip page table locks; but unmap_mapping_pages() never
skips them, so fixed the issue. I did once hit that VM_BUG_ON_PAGE()
since making this change: we could pass TTU_SYNC here, but I think just
delete the check - the race is very rare, this is an ordinary small page
so we don't need to be so paranoid about mapcount surprises, and the
page_ref_freeze() just below already handles the case adequately.
Signed-off-by: Hugh Dickins <hughd@google.com>
---
v2: same as v1.
mm/khugepaged.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index d5e387c58bde..e0883a33efd6 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1829,13 +1829,12 @@ static void collapse_file(struct mm_struct *mm,
}
if (page_mapped(page))
- unmap_mapping_pages(mapping, index, 1, false);
+ try_to_unmap(page, TTU_IGNORE_MLOCK | TTU_BATCH_FLUSH);
xas_lock_irq(&xas);
xas_set(&xas, index);
VM_BUG_ON_PAGE(page != xas_load(&xas), page);
- VM_BUG_ON_PAGE(page_mapped(page), page);
/*
* The page is expected to have page_count() == 3:
@@ -1899,6 +1898,13 @@ static void collapse_file(struct mm_struct *mm,
xas_unlock_irq(&xas);
xa_unlocked:
+ /*
+ * If collapse is successful, flush must be done now before copying.
+ * If collapse is unsuccessful, does flush actually need to be done?
+ * Do it anyway, to clear the state.
+ */
+ try_to_unmap_flush();
+
if (result == SCAN_SUCCEED) {
struct page *page, *tmp;
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* [PATCH v2 13/13] mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (11 preceding siblings ...)
2022-02-15 2:40 ` [PATCH v2 12/13] mm/thp: collapse_file() do try_to_unmap(TTU_BATCH_FLUSH) Hugh Dickins
@ 2022-02-15 2:42 ` Hugh Dickins
2022-02-15 19:35 ` [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Matthew Wilcox
13 siblings, 0 replies; 29+ messages in thread
From: Hugh Dickins @ 2022-02-15 2:42 UTC (permalink / raw)
To: Andrew Morton
Cc: Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
Matthew Wilcox, David Hildenbrand, Alistair Popple,
Johannes Weiner, Rik van Riel, Suren Baghdasaryan, Yu Zhao,
Greg Thelen, Shakeel Butt, linux-kernel, linux-mm
4.8 commit 7751b2da6be0 ("vmscan: split file huge pages before paging
them out") inserted a split_huge_page_to_list() into shrink_page_list()
without considering the mlock case: no problem if the page has already
been marked as Mlocked (the !page_evictable check much higher up will
have skipped all this), but it has always been the case that races or
omissions in setting Mlocked can rely on page reclaim to detect this
and correct it before actually reclaiming - and that remains so, but
what a shame if a hugepage is needlessly split before discovering it.
It is surprising that page_check_references() returns PAGEREF_RECLAIM
when VM_LOCKED, but there was a good reason for that: try_to_unmap_one()
is where the condition is detected and corrected; and until now it could
not be done in page_referenced_one(), because that does not always have
the page locked. Now that mlock's requirement for page lock has gone,
copy try_to_unmap_one()'s mlock restoration into page_referenced_one(),
and let page_check_references() return PAGEREF_ACTIVATE in this case.
But page_referenced_one() may find a pte mapping one part of a hugepage:
what hold should a pte mapped in a VM_LOCKED area exert over the entire
huge page? That's debatable. The approach taken here is to treat that
pte mapping in page_referenced_one() as if not VM_LOCKED, and if no
VM_LOCKED pmd mapping is found later in the walk, and lack of reference
permits, then PAGEREF_RECLAIM take it to attempted splitting as before.
Signed-off-by: Hugh Dickins <hughd@google.com>
---
v2: same as v1.
mm/rmap.c | 7 +++++--
mm/vmscan.c | 6 +++---
2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/mm/rmap.c b/mm/rmap.c
index 714bfdc72c7b..c7921c102bc0 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -812,7 +812,10 @@ static bool page_referenced_one(struct page *page, struct vm_area_struct *vma,
while (page_vma_mapped_walk(&pvmw)) {
address = pvmw.address;
- if (vma->vm_flags & VM_LOCKED) {
+ if ((vma->vm_flags & VM_LOCKED) &&
+ (!PageTransCompound(page) || !pvmw.pte)) {
+ /* Restore the mlock which got missed */
+ mlock_vma_page(page, vma, !pvmw.pte);
page_vma_mapped_walk_done(&pvmw);
pra->vm_flags |= VM_LOCKED;
return false; /* To break the loop */
@@ -851,7 +854,7 @@ static bool page_referenced_one(struct page *page, struct vm_area_struct *vma,
if (referenced) {
pra->referenced++;
- pra->vm_flags |= vma->vm_flags;
+ pra->vm_flags |= vma->vm_flags & ~VM_LOCKED;
}
if (!pra->mapcount)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 090bfb605ecf..a160efba3c73 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1386,11 +1386,11 @@ static enum page_references page_check_references(struct page *page,
referenced_page = TestClearPageReferenced(page);
/*
- * Mlock lost the isolation race with us. Let try_to_unmap()
- * move the page to the unevictable list.
+ * The supposedly reclaimable page was found to be in a VM_LOCKED vma.
+ * Let the page, now marked Mlocked, be moved to the unevictable list.
*/
if (vm_flags & VM_LOCKED)
- return PAGEREF_RECLAIM;
+ return PAGEREF_ACTIVATE;
if (referenced_ptes) {
/*
--
2.34.1
^ permalink raw reply related [flat|nested] 29+ messages in thread* Re: [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling
2022-02-15 2:18 [PATCH v2 00/13] mm/munlock: rework of mlock+munlock page handling Hugh Dickins
` (12 preceding siblings ...)
2022-02-15 2:42 ` [PATCH v2 13/13] mm/thp: shrink_page_list() avoid splitting VM_LOCKED THP Hugh Dickins
@ 2022-02-15 19:35 ` Matthew Wilcox
13 siblings, 0 replies; 29+ messages in thread
From: Matthew Wilcox @ 2022-02-15 19:35 UTC (permalink / raw)
To: Hugh Dickins
Cc: Andrew Morton, Michal Hocko, Vlastimil Babka, Kirill A. Shutemov,
David Hildenbrand, Alistair Popple, Johannes Weiner,
Rik van Riel, Suren Baghdasaryan, Yu Zhao, Greg Thelen,
Shakeel Butt, linux-kernel, linux-mm
On Mon, Feb 14, 2022 at 06:18:34PM -0800, Hugh Dickins wrote:
> Andrew, many thanks for including v1 and fixes in mmotm: please now replace
>
> mm-munlock-delete-page_mlock-and-all-its-works.patch
> mm-munlock-delete-foll_mlock-and-foll_populate.patch
> mm-munlock-delete-munlock_vma_pages_all-allow-oomreap.patch
> mm-munlock-rmap-call-mlock_vma_page-munlock_vma_page.patch
> mm-munlock-replace-clear_page_mlock-by-final-clearance.patch
> mm-munlock-maintain-page-mlock_count-while-unevictable.patch
> mm-munlock-mlock_pte_range-when-mlocking-or-munlocking.patch
> mm-migrate-__unmap_and_move-push-good-newpage-to-lru.patch
> mm-munlock-delete-smp_mb-from-__pagevec_lru_add_fn.patch
> mm-munlock-mlock_page-munlock_page-batch-by-pagevec.patch
> mm-munlock-mlock_page-munlock_page-batch-by-pagevec-fix.patch
> mm-munlock-mlock_page-munlock_page-batch-by-pagevec-fix-2.patch
> mm-munlock-page-migration-needs-mlock-pagevec-drained.patch
> mm-thp-collapse_file-do-try_to_unmapttu_batch_flush.patch
> mm-thp-shrink_page_list-avoid-splitting-vm_locked-thp.patch
>
> by the following thirteen of v2. As before, some easy fixups will be
> needed to apply in mm/huge_memory.c, but otherwise expected to be clean.
>
> Many thanks to Vlastimil Babka for his review of 01 through 11, and
> to Matthew Wilcox for graciously volunteering to rebase his over these.
I have now pushed these 13 patches to my for-next branch:
git://git.infradead.org/users/willy/pagecache.git for-next
and rebased my folio patches on top. Mostly that involved dropping
my mlock-related patches, although there were a few other adjustments
that needed to be made. That should make Stephen's merge resolution
much easier once Andrew drops v1 of these patches from his tree.
^ permalink raw reply [flat|nested] 29+ messages in thread