All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH BlueZ 1/4] client: Add discoverable-timeout command
@ 2018-07-25 10:20 Luiz Augusto von Dentz
  2018-07-25 10:20 ` [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout Luiz Augusto von Dentz
                   ` (3 more replies)
  0 siblings, 4 replies; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-25 10:20 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds discoverable-timeout command which can be used to get/set
DiscoverableTimeout property:

[bluetooth]# discoverable-timeout 180
Changing discoverable-timeout 180 succeeded
---
 client/main.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/client/main.c b/client/main.c
index 87323d8f7..59820c6d9 100644
--- a/client/main.c
+++ b/client/main.c
@@ -1061,6 +1061,47 @@ static void cmd_discoverable(int argc, char *argv[])
 	return bt_shell_noninteractive_quit(EXIT_FAILURE);
 }
 
+static void cmd_discoverable_timeout(int argc, char *argv[])
+{
+	uint32_t value;
+	char *endptr = NULL;
+	char *str;
+
+	if (argc < 2) {
+		DBusMessageIter iter;
+
+		if (!g_dbus_proxy_get_property(default_ctrl->proxy,
+					"DiscoverableTimeout", &iter)) {
+			bt_shell_printf("Unable to get DiscoverableTimeout\n");
+			return bt_shell_noninteractive_quit(EXIT_FAILURE);
+		}
+
+		dbus_message_iter_get_basic(&iter, &value);
+
+		bt_shell_printf("DiscoverableTimeout: %d seconds\n", value);
+
+		return;
+	}
+
+	value = strtol(argv[1], &endptr, 0);
+	if (!endptr || *endptr != '\0' || value > UINT32_MAX) {
+		bt_shell_printf("Invalid argument\n");
+		return bt_shell_noninteractive_quit(EXIT_FAILURE);
+	}
+
+	str = g_strdup_printf("discoverable-timeout %d", value);
+
+	if (g_dbus_proxy_set_property_basic(default_ctrl->proxy,
+					"DiscoverableTimeout",
+					DBUS_TYPE_UINT32, &value,
+					generic_callback, str, g_free))
+		return;
+
+	g_free(str);
+
+	return bt_shell_noninteractive_quit(EXIT_FAILURE);
+}
+
 static void cmd_agent(int argc, char *argv[])
 {
 	dbus_bool_t enable;
@@ -2549,6 +2590,8 @@ static const struct bt_shell_menu main_menu = {
 	{ "discoverable", "<on/off>", cmd_discoverable,
 					"Set controller discoverable mode",
 							NULL },
+	{ "discoverable-timeout", "[value]", cmd_discoverable_timeout,
+					"Set discoverable timeout", NULL },
 	{ "agent",        "<on/off/capability>", cmd_agent,
 				"Enable/disable agent with given capability",
 							capability_generator},
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout
  2018-07-25 10:20 [PATCH BlueZ 1/4] client: Add discoverable-timeout command Luiz Augusto von Dentz
@ 2018-07-25 10:20 ` Luiz Augusto von Dentz
  2018-07-26 12:43   ` Bastien Nocera
  2018-07-25 10:20 ` [PATCH BlueZ 3/4] adapter: Track pending settings Luiz Augusto von Dentz
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-25 10:20 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Controller XX:XX:XX:XX:XX:XX (public)
	Name: Vudentz's T460s
	Alias: Intel-1
	Class: 0x004c010c
	Powered: yes
	Discoverable: no
	DiscoverableTimeout: 0x00000000
	Pairable: yes
	UUID: Headset AG                (00001112-0000-1000-8000-00805f9b34fb)
	UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
	UUID: SIM Access                (0000112d-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
	UUID: Audio Source              (0000110a-0000-1000-8000-00805f9b34fb)
	UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
	UUID: Headset                   (00001108-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v1D6Bp0246d0532
	Discovering: no
---
 client/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/client/main.c b/client/main.c
index 59820c6d9..6f472d050 100644
--- a/client/main.c
+++ b/client/main.c
@@ -877,6 +877,7 @@ static void cmd_show(int argc, char *argv[])
 	print_property(proxy, "Class");
 	print_property(proxy, "Powered");
 	print_property(proxy, "Discoverable");
+	print_property(proxy, "DiscoverableTimeout");
 	print_property(proxy, "Pairable");
 	print_uuids(proxy);
 	print_property(proxy, "Modalias");
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH BlueZ 3/4] adapter: Track pending settings
  2018-07-25 10:20 [PATCH BlueZ 1/4] client: Add discoverable-timeout command Luiz Augusto von Dentz
  2018-07-25 10:20 ` [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout Luiz Augusto von Dentz
@ 2018-07-25 10:20 ` Luiz Augusto von Dentz
  2018-07-26 12:43   ` Bastien Nocera
  2018-07-25 10:20 ` [PATCH BlueZ 4/4] adapter: Check pending when setting DiscoverableTimeout Luiz Augusto von Dentz
  2018-07-26 12:43 ` [PATCH BlueZ 1/4] client: Add discoverable-timeout command Bastien Nocera
  3 siblings, 1 reply; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-25 10:20 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This tracks settings being changed and in case the settings is already
pending considered it to be done.
---
 src/adapter.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/src/adapter.c b/src/adapter.c
index af340fd6e..20c20f9e9 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -196,6 +196,7 @@ struct btd_adapter {
 	char *name;			/* controller device name */
 	char *short_name;		/* controller short name */
 	uint32_t supported_settings;	/* controller supported settings */
+	uint32_t pending_settings;	/* pending controller settings */
 	uint32_t current_settings;	/* current controller settings */
 
 	char *path;			/* adapter object path */
@@ -509,8 +510,10 @@ static void settings_changed(struct btd_adapter *adapter, uint32_t settings)
 	changed_mask = adapter->current_settings ^ settings;
 
 	adapter->current_settings = settings;
+	adapter->pending_settings &= ~changed_mask;
 
 	DBG("Changed settings: 0x%08x", changed_mask);
+	DBG("Pending settings: 0x%08x", adapter->pending_settings);
 
 	if (changed_mask & MGMT_SETTING_POWERED) {
 	        g_dbus_emit_property_changed(dbus_conn, adapter->path,
@@ -596,10 +599,31 @@ static bool set_mode(struct btd_adapter *adapter, uint16_t opcode,
 							uint8_t mode)
 {
 	struct mgmt_mode cp;
+	uint32_t setting = 0;
 
 	memset(&cp, 0, sizeof(cp));
 	cp.val = mode;
 
+	switch (mode) {
+	case MGMT_OP_SET_POWERED:
+		setting = MGMT_SETTING_POWERED;
+		break;
+	case MGMT_OP_SET_CONNECTABLE:
+		setting = MGMT_SETTING_CONNECTABLE;
+		break;
+	case MGMT_OP_SET_FAST_CONNECTABLE:
+		setting = MGMT_SETTING_FAST_CONNECTABLE;
+		break;
+	case MGMT_OP_SET_DISCOVERABLE:
+		setting = MGMT_SETTING_DISCOVERABLE;
+		break;
+	case MGMT_OP_SET_BONDABLE:
+		setting = MGMT_SETTING_DISCOVERABLE;
+		break;
+	}
+
+	adapter->pending_settings |= setting;
+
 	DBG("sending set mode command for index %u", adapter->dev_id);
 
 	if (mgmt_send(adapter->mgmt, opcode,
@@ -2739,13 +2763,15 @@ static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
 	else
 		current_enable = FALSE;
 
-	if (enable == current_enable) {
+	if (enable == current_enable || adapter->pending_settings & setting) {
 		g_dbus_pending_property_success(id);
 		return;
 	}
 
 	mode = (enable == TRUE) ? 0x01 : 0x00;
 
+	adapter->pending_settings |= setting;
+
 	switch (setting) {
 	case MGMT_SETTING_POWERED:
 		opcode = MGMT_OP_SET_POWERED;
@@ -2798,7 +2824,7 @@ static void property_set_mode(struct btd_adapter *adapter, uint32_t setting,
 	data->id = id;
 
 	if (mgmt_send(adapter->mgmt, opcode, adapter->dev_id, len, param,
-				property_set_mode_complete, data, g_free) > 0)
+			property_set_mode_complete, data, g_free) > 0)
 		return;
 
 	g_free(data);
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* [PATCH BlueZ 4/4] adapter: Check pending when setting DiscoverableTimeout
  2018-07-25 10:20 [PATCH BlueZ 1/4] client: Add discoverable-timeout command Luiz Augusto von Dentz
  2018-07-25 10:20 ` [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout Luiz Augusto von Dentz
  2018-07-25 10:20 ` [PATCH BlueZ 3/4] adapter: Track pending settings Luiz Augusto von Dentz
@ 2018-07-25 10:20 ` Luiz Augusto von Dentz
  2018-07-26 12:43 ` [PATCH BlueZ 1/4] client: Add discoverable-timeout command Bastien Nocera
  3 siblings, 0 replies; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-25 10:20 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This makes DiscoverableTimeout check if discoverable is already pending
and don't attempt to set it once again which may cause discoverable to
be re-enabled when in fact the application just want to set the timeout
alone.
---
 src/adapter.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/src/adapter.c b/src/adapter.c
index 20c20f9e9..f92c897c7 100644
--- a/src/adapter.c
+++ b/src/adapter.c
@@ -2901,6 +2901,7 @@ static void property_set_discoverable_timeout(
 				GDBusPendingPropertySet id, void *user_data)
 {
 	struct btd_adapter *adapter = user_data;
+	bool enabled;
 	dbus_uint32_t value;
 
 	dbus_message_iter_get_basic(iter, &value);
@@ -2914,8 +2915,19 @@ static void property_set_discoverable_timeout(
 	g_dbus_emit_property_changed(dbus_conn, adapter->path,
 				ADAPTER_INTERFACE, "DiscoverableTimeout");
 
+	if (adapter->pending_settings & MGMT_SETTING_DISCOVERABLE) {
+		if (adapter->current_settings & MGMT_SETTING_DISCOVERABLE)
+			enabled = false;
+		else
+			enabled = true;
+	} else {
+		if (adapter->current_settings & MGMT_SETTING_DISCOVERABLE)
+			enabled = true;
+		else
+			enabled = false;
+	}
 
-	if (adapter->current_settings & MGMT_SETTING_DISCOVERABLE)
+	if (enabled)
 		set_discoverable(adapter, 0x01, adapter->discoverable_timeout);
 }
 
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

* Re: [PATCH BlueZ 1/4] client: Add discoverable-timeout command
  2018-07-25 10:20 [PATCH BlueZ 1/4] client: Add discoverable-timeout command Luiz Augusto von Dentz
                   ` (2 preceding siblings ...)
  2018-07-25 10:20 ` [PATCH BlueZ 4/4] adapter: Check pending when setting DiscoverableTimeout Luiz Augusto von Dentz
@ 2018-07-26 12:43 ` Bastien Nocera
  2018-07-30  6:54   ` Luiz Augusto von Dentz
  3 siblings, 1 reply; 11+ messages in thread
From: Bastien Nocera @ 2018-07-26 12:43 UTC (permalink / raw)
  To: Luiz Augusto von Dentz, linux-bluetooth

On Wed, 2018-07-25 at 13:20 +0300, Luiz Augusto von Dentz wrote:
> From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
> 
> This adds discoverable-timeout command which can be used to get/set
> DiscoverableTimeout property:
> 
> [bluetooth]# discoverable-timeout 180
> Changing discoverable-timeout 180 succeeded

Tested ok here.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout
  2018-07-25 10:20 ` [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout Luiz Augusto von Dentz
@ 2018-07-26 12:43   ` Bastien Nocera
  0 siblings, 0 replies; 11+ messages in thread
From: Bastien Nocera @ 2018-07-26 12:43 UTC (permalink / raw)
  To: Luiz Augusto von Dentz, linux-bluetooth

On Wed, 2018-07-25 at 13:20 +0300, Luiz Augusto von Dentz wrote:
>         DiscoverableTimeout: 0x00000000

That seems to work, but an hex number is pretty useless here. Could you
special case DiscoverableTimeout in print_property to show a base-10
integer instead?

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH BlueZ 3/4] adapter: Track pending settings
  2018-07-25 10:20 ` [PATCH BlueZ 3/4] adapter: Track pending settings Luiz Augusto von Dentz
@ 2018-07-26 12:43   ` Bastien Nocera
  2018-07-26 14:19     ` Luiz Augusto von Dentz
  0 siblings, 1 reply; 11+ messages in thread
From: Bastien Nocera @ 2018-07-26 12:43 UTC (permalink / raw)
  To: Luiz Augusto von Dentz, linux-bluetooth

On Wed, 2018-07-25 at 13:20 +0300, Luiz Augusto von Dentz wrote:
> -                               property_set_mode_complete, data, g_free) > 0)
> +                       property_set_mode_complete, data, g_free) > 0)

White space change is probably not needed here.

This patch and 4/4 don't work as expected though. I use this set of 2
commands to replicate what gnome-bluetooth did:

dbus-send  --system --dest=org.bluez /org/bluez/hci0
org.freedesktop.DBus.Properties.Set string:org.bluez.Adapter1
string:Discoverable variant:boolean:false ; dbus-send  --system --
dest=org.bluez /org/bluez/hci0 org.freedesktop.DBus.Properties.Set
string:org.bluez.Adapter1 string:DiscoverableTimeout variant:uint32:0

You can add a "print-reply" which will wait for the caller to return.
In my case, without the --print-reply, property_set_mode will never be
called.

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH BlueZ 3/4] adapter: Track pending settings
  2018-07-26 12:43   ` Bastien Nocera
@ 2018-07-26 14:19     ` Luiz Augusto von Dentz
  2018-07-26 14:28       ` Bastien Nocera
  0 siblings, 1 reply; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-26 14:19 UTC (permalink / raw)
  To: Bastien Nocera; +Cc: linux-bluetooth

Hi,

On Thu, Jul 26, 2018 at 3:43 PM, Bastien Nocera <hadess@hadess.net> wrote:
> On Wed, 2018-07-25 at 13:20 +0300, Luiz Augusto von Dentz wrote:
>> -                               property_set_mode_complete, data, g_free) > 0)
>> +                       property_set_mode_complete, data, g_free) > 0)
>
> White space change is probably not needed here.
>
> This patch and 4/4 don't work as expected though. I use this set of 2
> commands to replicate what gnome-bluetooth did:
>
> dbus-send  --system --dest=org.bluez /org/bluez/hci0
> org.freedesktop.DBus.Properties.Set string:org.bluez.Adapter1
> string:Discoverable variant:boolean:false ; dbus-send  --system --
> dest=org.bluez /org/bluez/hci0 org.freedesktop.DBus.Properties.Set
> string:org.bluez.Adapter1 string:DiscoverableTimeout variant:uint32:0
>
> You can add a "print-reply" which will wait for the caller to return.
> In my case, without the --print-reply, property_set_mode will never be
> called.

It looks like dbus-send cannot be used since it exits immediately,
anyway I tried by modifying bluetoothctl and it seems to be working
properly:

https://gist.github.com/Vudentz/69737e4cc236f24d33404fffc5e51ff4


-- 
Luiz Augusto von Dentz

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH BlueZ 3/4] adapter: Track pending settings
  2018-07-26 14:19     ` Luiz Augusto von Dentz
@ 2018-07-26 14:28       ` Bastien Nocera
  0 siblings, 0 replies; 11+ messages in thread
From: Bastien Nocera @ 2018-07-26 14:28 UTC (permalink / raw)
  To: Luiz Augusto von Dentz; +Cc: linux-bluetooth

On Thu, 2018-07-26 at 17:19 +0300, Luiz Augusto von Dentz wrote:
> Hi,
> 
> On Thu, Jul 26, 2018 at 3:43 PM, Bastien Nocera <hadess@hadess.net>
> wrote:
> > On Wed, 2018-07-25 at 13:20 +0300, Luiz Augusto von Dentz wrote:
> > > -                               property_set_mode_complete, data,
> > > g_free) > 0)
> > > +                       property_set_mode_complete, data, g_free)
> > > > 0)
> > 
> > White space change is probably not needed here.
> > 
> > This patch and 4/4 don't work as expected though. I use this set of
> > 2
> > commands to replicate what gnome-bluetooth did:
> > 
> > dbus-send  --system --dest=org.bluez /org/bluez/hci0
> > org.freedesktop.DBus.Properties.Set string:org.bluez.Adapter1
> > string:Discoverable variant:boolean:false ; dbus-send  --system --
> > dest=org.bluez /org/bluez/hci0 org.freedesktop.DBus.Properties.Set
> > string:org.bluez.Adapter1 string:DiscoverableTimeout
> > variant:uint32:0
> > 
> > You can add a "print-reply" which will wait for the caller to
> > return.
> > In my case, without the --print-reply, property_set_mode will never
> > be
> > called.
> 
> It looks like dbus-send cannot be used since it exits immediately,
> anyway I tried by modifying bluetoothctl and it seems to be working
> properly:
> 
> https://gist.github.com/Vudentz/69737e4cc236f24d33404fffc5e51ff4

I think it's a bug in bluetoothd that it would drop property change
requests when the caller goes away, but as you said, it works as
expected when both properties are called from a single, long-running,
client.

Looks good

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH BlueZ 1/4] client: Add discoverable-timeout command
  2018-07-26 12:43 ` [PATCH BlueZ 1/4] client: Add discoverable-timeout command Bastien Nocera
@ 2018-07-30  6:54   ` Luiz Augusto von Dentz
  0 siblings, 0 replies; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-30  6:54 UTC (permalink / raw)
  To: Bastien Nocera; +Cc: linux-bluetooth

Hi,

On Thu, Jul 26, 2018 at 3:43 PM, Bastien Nocera <hadess@hadess.net> wrote:
> On Wed, 2018-07-25 at 13:20 +0300, Luiz Augusto von Dentz wrote:
>> From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
>>
>> This adds discoverable-timeout command which can be used to get/set
>> DiscoverableTimeout property:
>>
>> [bluetooth]# discoverable-timeout 180
>> Changing discoverable-timeout 180 succeeded
>
> Tested ok here.

Applied.

-- 
Luiz Augusto von Dentz

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH BlueZ 1/4] client: Add discoverable-timeout command
@ 2018-07-25 10:20 Luiz Augusto von Dentz
  0 siblings, 0 replies; 11+ messages in thread
From: Luiz Augusto von Dentz @ 2018-07-25 10:20 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This adds discoverable-timeout command which can be used to get/set
DiscoverableTimeout property:

[bluetooth]# discoverable-timeout 180
Changing discoverable-timeout 180 succeeded
---
 client/main.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/client/main.c b/client/main.c
index 87323d8f7..59820c6d9 100644
--- a/client/main.c
+++ b/client/main.c
@@ -1061,6 +1061,47 @@ static void cmd_discoverable(int argc, char *argv[])
 	return bt_shell_noninteractive_quit(EXIT_FAILURE);
 }
 
+static void cmd_discoverable_timeout(int argc, char *argv[])
+{
+	uint32_t value;
+	char *endptr = NULL;
+	char *str;
+
+	if (argc < 2) {
+		DBusMessageIter iter;
+
+		if (!g_dbus_proxy_get_property(default_ctrl->proxy,
+					"DiscoverableTimeout", &iter)) {
+			bt_shell_printf("Unable to get DiscoverableTimeout\n");
+			return bt_shell_noninteractive_quit(EXIT_FAILURE);
+		}
+
+		dbus_message_iter_get_basic(&iter, &value);
+
+		bt_shell_printf("DiscoverableTimeout: %d seconds\n", value);
+
+		return;
+	}
+
+	value = strtol(argv[1], &endptr, 0);
+	if (!endptr || *endptr != '\0' || value > UINT32_MAX) {
+		bt_shell_printf("Invalid argument\n");
+		return bt_shell_noninteractive_quit(EXIT_FAILURE);
+	}
+
+	str = g_strdup_printf("discoverable-timeout %d", value);
+
+	if (g_dbus_proxy_set_property_basic(default_ctrl->proxy,
+					"DiscoverableTimeout",
+					DBUS_TYPE_UINT32, &value,
+					generic_callback, str, g_free))
+		return;
+
+	g_free(str);
+
+	return bt_shell_noninteractive_quit(EXIT_FAILURE);
+}
+
 static void cmd_agent(int argc, char *argv[])
 {
 	dbus_bool_t enable;
@@ -2549,6 +2590,8 @@ static const struct bt_shell_menu main_menu = {
 	{ "discoverable", "<on/off>", cmd_discoverable,
 					"Set controller discoverable mode",
 							NULL },
+	{ "discoverable-timeout", "[value]", cmd_discoverable_timeout,
+					"Set discoverable timeout", NULL },
 	{ "agent",        "<on/off/capability>", cmd_agent,
 				"Enable/disable agent with given capability",
 							capability_generator},
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2018-07-30  6:54 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-25 10:20 [PATCH BlueZ 1/4] client: Add discoverable-timeout command Luiz Augusto von Dentz
2018-07-25 10:20 ` [PATCH BlueZ 2/4] client: Make show command print DiscoverableTimeout Luiz Augusto von Dentz
2018-07-26 12:43   ` Bastien Nocera
2018-07-25 10:20 ` [PATCH BlueZ 3/4] adapter: Track pending settings Luiz Augusto von Dentz
2018-07-26 12:43   ` Bastien Nocera
2018-07-26 14:19     ` Luiz Augusto von Dentz
2018-07-26 14:28       ` Bastien Nocera
2018-07-25 10:20 ` [PATCH BlueZ 4/4] adapter: Check pending when setting DiscoverableTimeout Luiz Augusto von Dentz
2018-07-26 12:43 ` [PATCH BlueZ 1/4] client: Add discoverable-timeout command Bastien Nocera
2018-07-30  6:54   ` Luiz Augusto von Dentz
  -- strict thread matches above, loose matches on Subject: below --
2018-07-25 10:20 Luiz Augusto von Dentz

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.