* [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
@ 2017-03-01 10:16 ` David Wu
0 siblings, 0 replies; 8+ messages in thread
From: David Wu @ 2017-03-01 10:16 UTC (permalink / raw)
To: boris.brezillon, briannorris, heiko, thierry.reding
Cc: dianders, b.galvani, caesar.wang, huangtao, linux-rockchip,
linux-pwm, linux-arm-kernel, linux-kernel, stable, david.wu
From: "david.wu" <david.wu@rock-chips.com>
If the pwm was not enabled at uboot loader, pwm could not work for clock
always disabled at pwm driver. The pwm clock is enabled at beginning of
pwm_apply(), but disabled at end of pwm_apply().
If the pwm was enabled at uboot loader, pwm clock is always enabled unless
closed by ATF. The pwm-backlight might turn off the power at early suspend,
should disable pwm clock for saving power consume.
It is important to provide opportunity to enable/disable clock at pwm driver,
the pwm consumer should ensure correct order to call pwm enable/disable, and
pwm driver ensure state of pwm clock synchronized with pwm enabled state.
Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
Cc: stable@vger.kernel.org
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index ef89df1..dbee3c3 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return 0;
}
+static int rk_pwm_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ bool enable,
+ enum pwm_polarity polarity)
+{
+ struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+ int ret;
+
+ if (enable) {
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+ }
+
+ pc->data->set_enable(chip, pwm, enable, polarity);
+
+ if (!enable)
+ clk_disable(pc->clk);
+
+ return 0;
+}
+
static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
@@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return ret;
if (state->polarity != curstate.polarity && enabled) {
- pc->data->set_enable(chip, pwm, false, state->polarity);
+ ret = rk_pwm_enable(chip, pwm, false, state->polarity);
+ if (ret)
+ goto out;
enabled = false;
}
ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
if (ret) {
if (enabled != curstate.enabled)
- pc->data->set_enable(chip, pwm, !enabled,
- state->polarity);
-
+ rk_pwm_enable(chip, pwm, !enabled,
+ state->polarity);
goto out;
}
- if (state->enabled != enabled)
- pc->data->set_enable(chip, pwm, state->enabled,
- state->polarity);
+ if (state->enabled != enabled) {
+ ret = rk_pwm_enable(chip, pwm, state->enabled,
+ state->polarity);
+ if (ret)
+ goto out;
+ }
/*
* Update the state with the real hardware, which can differ a bit
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
@ 2017-03-01 10:16 ` David Wu
0 siblings, 0 replies; 8+ messages in thread
From: David Wu @ 2017-03-01 10:16 UTC (permalink / raw)
To: boris.brezillon, briannorris, heiko, thierry.reding
Cc: huangtao, linux-pwm, dianders, stable, linux-kernel, b.galvani,
linux-rockchip, caesar.wang, david.wu, linux-arm-kernel
From: "david.wu" <david.wu@rock-chips.com>
If the pwm was not enabled at uboot loader, pwm could not work for clock
always disabled at pwm driver. The pwm clock is enabled at beginning of
pwm_apply(), but disabled at end of pwm_apply().
If the pwm was enabled at uboot loader, pwm clock is always enabled unless
closed by ATF. The pwm-backlight might turn off the power at early suspend,
should disable pwm clock for saving power consume.
It is important to provide opportunity to enable/disable clock at pwm driver,
the pwm consumer should ensure correct order to call pwm enable/disable, and
pwm driver ensure state of pwm clock synchronized with pwm enabled state.
Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
Cc: stable@vger.kernel.org
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index ef89df1..dbee3c3 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return 0;
}
+static int rk_pwm_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ bool enable,
+ enum pwm_polarity polarity)
+{
+ struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+ int ret;
+
+ if (enable) {
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+ }
+
+ pc->data->set_enable(chip, pwm, enable, polarity);
+
+ if (!enable)
+ clk_disable(pc->clk);
+
+ return 0;
+}
+
static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
@@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return ret;
if (state->polarity != curstate.polarity && enabled) {
- pc->data->set_enable(chip, pwm, false, state->polarity);
+ ret = rk_pwm_enable(chip, pwm, false, state->polarity);
+ if (ret)
+ goto out;
enabled = false;
}
ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
if (ret) {
if (enabled != curstate.enabled)
- pc->data->set_enable(chip, pwm, !enabled,
- state->polarity);
-
+ rk_pwm_enable(chip, pwm, !enabled,
+ state->polarity);
goto out;
}
- if (state->enabled != enabled)
- pc->data->set_enable(chip, pwm, state->enabled,
- state->polarity);
+ if (state->enabled != enabled) {
+ ret = rk_pwm_enable(chip, pwm, state->enabled,
+ state->polarity);
+ if (ret)
+ goto out;
+ }
/*
* Update the state with the real hardware, which can differ a bit
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
@ 2017-03-01 10:16 ` David Wu
0 siblings, 0 replies; 8+ messages in thread
From: David Wu @ 2017-03-01 10:16 UTC (permalink / raw)
To: linux-arm-kernel
From: "david.wu" <david.wu@rock-chips.com>
If the pwm was not enabled at uboot loader, pwm could not work for clock
always disabled at pwm driver. The pwm clock is enabled at beginning of
pwm_apply(), but disabled at end of pwm_apply().
If the pwm was enabled at uboot loader, pwm clock is always enabled unless
closed by ATF. The pwm-backlight might turn off the power at early suspend,
should disable pwm clock for saving power consume.
It is important to provide opportunity to enable/disable clock at pwm driver,
the pwm consumer should ensure correct order to call pwm enable/disable, and
pwm driver ensure state of pwm clock synchronized with pwm enabled state.
Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
Cc: stable at vger.kernel.org
Signed-off-by: David Wu <david.wu@rock-chips.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
---
drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index ef89df1..dbee3c3 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
return 0;
}
+static int rk_pwm_enable(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ bool enable,
+ enum pwm_polarity polarity)
+{
+ struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+ int ret;
+
+ if (enable) {
+ ret = clk_enable(pc->clk);
+ if (ret)
+ return ret;
+ }
+
+ pc->data->set_enable(chip, pwm, enable, polarity);
+
+ if (!enable)
+ clk_disable(pc->clk);
+
+ return 0;
+}
+
static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
struct pwm_state *state)
{
@@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
return ret;
if (state->polarity != curstate.polarity && enabled) {
- pc->data->set_enable(chip, pwm, false, state->polarity);
+ ret = rk_pwm_enable(chip, pwm, false, state->polarity);
+ if (ret)
+ goto out;
enabled = false;
}
ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
if (ret) {
if (enabled != curstate.enabled)
- pc->data->set_enable(chip, pwm, !enabled,
- state->polarity);
-
+ rk_pwm_enable(chip, pwm, !enabled,
+ state->polarity);
goto out;
}
- if (state->enabled != enabled)
- pc->data->set_enable(chip, pwm, state->enabled,
- state->polarity);
+ if (state->enabled != enabled) {
+ ret = rk_pwm_enable(chip, pwm, state->enabled,
+ state->polarity);
+ if (ret)
+ goto out;
+ }
/*
* Update the state with the real hardware, which can differ a bit
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
2017-03-01 10:16 ` David Wu
@ 2017-03-01 10:19 ` Boris Brezillon
-1 siblings, 0 replies; 8+ messages in thread
From: Boris Brezillon @ 2017-03-01 10:19 UTC (permalink / raw)
To: David Wu
Cc: briannorris, heiko, thierry.reding, dianders, b.galvani,
caesar.wang, huangtao, linux-rockchip, linux-pwm,
linux-arm-kernel, linux-kernel, stable
On Wed, 1 Mar 2017 18:16:02 +0800
David Wu <david.wu@rock-chips.com> wrote:
> From: "david.wu" <david.wu@rock-chips.com>
>
> If the pwm was not enabled at uboot loader, pwm could not work for clock
> always disabled at pwm driver. The pwm clock is enabled at beginning of
> pwm_apply(), but disabled at end of pwm_apply().
>
> If the pwm was enabled at uboot loader, pwm clock is always enabled unless
> closed by ATF. The pwm-backlight might turn off the power at early suspend,
> should disable pwm clock for saving power consume.
>
> It is important to provide opportunity to enable/disable clock at pwm driver,
> the pwm consumer should ensure correct order to call pwm enable/disable, and
> pwm driver ensure state of pwm clock synchronized with pwm enabled state.
>
> Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
> Cc: stable@vger.kernel.org
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
> 1 file changed, 33 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
> index ef89df1..dbee3c3 100644
> --- a/drivers/pwm/pwm-rockchip.c
> +++ b/drivers/pwm/pwm-rockchip.c
> @@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> return 0;
> }
>
> +static int rk_pwm_enable(struct pwm_chip *chip,
> + struct pwm_device *pwm,
> + bool enable,
> + enum pwm_polarity polarity)
You didn't change the function name:
s/rk_pwm_enable/rockchip_pwm_enable/
> +{
> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> + int ret;
> +
> + if (enable) {
> + ret = clk_enable(pc->clk);
> + if (ret)
> + return ret;
> + }
> +
> + pc->data->set_enable(chip, pwm, enable, polarity);
> +
> + if (!enable)
> + clk_disable(pc->clk);
> +
> + return 0;
> +}
> +
> static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> struct pwm_state *state)
> {
> @@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> return ret;
>
> if (state->polarity != curstate.polarity && enabled) {
> - pc->data->set_enable(chip, pwm, false, state->polarity);
> + ret = rk_pwm_enable(chip, pwm, false, state->polarity);
> + if (ret)
> + goto out;
> enabled = false;
> }
>
> ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
> if (ret) {
> if (enabled != curstate.enabled)
> - pc->data->set_enable(chip, pwm, !enabled,
> - state->polarity);
> -
> + rk_pwm_enable(chip, pwm, !enabled,
> + state->polarity);
> goto out;
> }
>
> - if (state->enabled != enabled)
> - pc->data->set_enable(chip, pwm, state->enabled,
> - state->polarity);
> + if (state->enabled != enabled) {
> + ret = rk_pwm_enable(chip, pwm, state->enabled,
> + state->polarity);
> + if (ret)
> + goto out;
> + }
>
> /*
> * Update the state with the real hardware, which can differ a bit
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
@ 2017-03-01 10:19 ` Boris Brezillon
0 siblings, 0 replies; 8+ messages in thread
From: Boris Brezillon @ 2017-03-01 10:19 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 1 Mar 2017 18:16:02 +0800
David Wu <david.wu@rock-chips.com> wrote:
> From: "david.wu" <david.wu@rock-chips.com>
>
> If the pwm was not enabled at uboot loader, pwm could not work for clock
> always disabled at pwm driver. The pwm clock is enabled at beginning of
> pwm_apply(), but disabled at end of pwm_apply().
>
> If the pwm was enabled at uboot loader, pwm clock is always enabled unless
> closed by ATF. The pwm-backlight might turn off the power at early suspend,
> should disable pwm clock for saving power consume.
>
> It is important to provide opportunity to enable/disable clock at pwm driver,
> the pwm consumer should ensure correct order to call pwm enable/disable, and
> pwm driver ensure state of pwm clock synchronized with pwm enabled state.
>
> Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
> Cc: stable at vger.kernel.org
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> ---
> drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
> 1 file changed, 33 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
> index ef89df1..dbee3c3 100644
> --- a/drivers/pwm/pwm-rockchip.c
> +++ b/drivers/pwm/pwm-rockchip.c
> @@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
> return 0;
> }
>
> +static int rk_pwm_enable(struct pwm_chip *chip,
> + struct pwm_device *pwm,
> + bool enable,
> + enum pwm_polarity polarity)
You didn't change the function name:
s/rk_pwm_enable/rockchip_pwm_enable/
> +{
> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> + int ret;
> +
> + if (enable) {
> + ret = clk_enable(pc->clk);
> + if (ret)
> + return ret;
> + }
> +
> + pc->data->set_enable(chip, pwm, enable, polarity);
> +
> + if (!enable)
> + clk_disable(pc->clk);
> +
> + return 0;
> +}
> +
> static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> struct pwm_state *state)
> {
> @@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> return ret;
>
> if (state->polarity != curstate.polarity && enabled) {
> - pc->data->set_enable(chip, pwm, false, state->polarity);
> + ret = rk_pwm_enable(chip, pwm, false, state->polarity);
> + if (ret)
> + goto out;
> enabled = false;
> }
>
> ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
> if (ret) {
> if (enabled != curstate.enabled)
> - pc->data->set_enable(chip, pwm, !enabled,
> - state->polarity);
> -
> + rk_pwm_enable(chip, pwm, !enabled,
> + state->polarity);
> goto out;
> }
>
> - if (state->enabled != enabled)
> - pc->data->set_enable(chip, pwm, state->enabled,
> - state->polarity);
> + if (state->enabled != enabled) {
> + ret = rk_pwm_enable(chip, pwm, state->enabled,
> + state->polarity);
> + if (ret)
> + goto out;
> + }
>
> /*
> * Update the state with the real hardware, which can differ a bit
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
2017-03-01 10:19 ` Boris Brezillon
(?)
@ 2017-03-01 11:00 ` David.Wu
-1 siblings, 0 replies; 8+ messages in thread
From: David.Wu @ 2017-03-01 11:00 UTC (permalink / raw)
To: Boris Brezillon
Cc: briannorris, heiko, thierry.reding, dianders, b.galvani,
caesar.wang, huangtao, linux-rockchip, linux-pwm,
linux-arm-kernel, linux-kernel, stable
Hi Boris,
在 2017/3/1 18:19, Boris Brezillon 写道:
> On Wed, 1 Mar 2017 18:16:02 +0800
> David Wu <david.wu@rock-chips.com> wrote:
>
>> From: "david.wu" <david.wu@rock-chips.com>
>>
>> If the pwm was not enabled at uboot loader, pwm could not work for clock
>> always disabled at pwm driver. The pwm clock is enabled at beginning of
>> pwm_apply(), but disabled at end of pwm_apply().
>>
>> If the pwm was enabled at uboot loader, pwm clock is always enabled unless
>> closed by ATF. The pwm-backlight might turn off the power at early suspend,
>> should disable pwm clock for saving power consume.
>>
>> It is important to provide opportunity to enable/disable clock at pwm driver,
>> the pwm consumer should ensure correct order to call pwm enable/disable, and
>> pwm driver ensure state of pwm clock synchronized with pwm enabled state.
>>
>> Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: David Wu <david.wu@rock-chips.com>
>> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>> ---
>> drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
>> 1 file changed, 33 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
>> index ef89df1..dbee3c3 100644
>> --- a/drivers/pwm/pwm-rockchip.c
>> +++ b/drivers/pwm/pwm-rockchip.c
>> @@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>> return 0;
>> }
>>
>> +static int rk_pwm_enable(struct pwm_chip *chip,
>> + struct pwm_device *pwm,
>> + bool enable,
>> + enum pwm_polarity polarity)
>
> You didn't change the function name:
>
> s/rk_pwm_enable/rockchip_pwm_enable/
Sorry, it is a pity not to fix in in v2.
>
>> +{
>> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
>> + int ret;
>> +
>> + if (enable) {
>> + ret = clk_enable(pc->clk);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + pc->data->set_enable(chip, pwm, enable, polarity);
>> +
>> + if (!enable)
>> + clk_disable(pc->clk);
>> +
>> + return 0;
>> +}
>> +
>> static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> struct pwm_state *state)
>> {
>> @@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> return ret;
>>
>> if (state->polarity != curstate.polarity && enabled) {
>> - pc->data->set_enable(chip, pwm, false, state->polarity);
>> + ret = rk_pwm_enable(chip, pwm, false, state->polarity);
>> + if (ret)
>> + goto out;
>> enabled = false;
>> }
>>
>> ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
>> if (ret) {
>> if (enabled != curstate.enabled)
>> - pc->data->set_enable(chip, pwm, !enabled,
>> - state->polarity);
>> -
>> + rk_pwm_enable(chip, pwm, !enabled,
>> + state->polarity);
>> goto out;
>> }
>>
>> - if (state->enabled != enabled)
>> - pc->data->set_enable(chip, pwm, state->enabled,
>> - state->polarity);
>> + if (state->enabled != enabled) {
>> + ret = rk_pwm_enable(chip, pwm, state->enabled,
>> + state->polarity);
>> + if (ret)
>> + goto out;
>> + }
>>
>> /*
>> * Update the state with the real hardware, which can differ a bit
>
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
@ 2017-03-01 11:00 ` David.Wu
0 siblings, 0 replies; 8+ messages in thread
From: David.Wu @ 2017-03-01 11:00 UTC (permalink / raw)
To: Boris Brezillon
Cc: huangtao, linux-pwm, heiko, briannorris, dianders, stable,
linux-kernel, b.galvani, linux-rockchip, thierry.reding,
caesar.wang, linux-arm-kernel
Hi Boris,
在 2017/3/1 18:19, Boris Brezillon 写道:
> On Wed, 1 Mar 2017 18:16:02 +0800
> David Wu <david.wu@rock-chips.com> wrote:
>
>> From: "david.wu" <david.wu@rock-chips.com>
>>
>> If the pwm was not enabled at uboot loader, pwm could not work for clock
>> always disabled at pwm driver. The pwm clock is enabled at beginning of
>> pwm_apply(), but disabled at end of pwm_apply().
>>
>> If the pwm was enabled at uboot loader, pwm clock is always enabled unless
>> closed by ATF. The pwm-backlight might turn off the power at early suspend,
>> should disable pwm clock for saving power consume.
>>
>> It is important to provide opportunity to enable/disable clock at pwm driver,
>> the pwm consumer should ensure correct order to call pwm enable/disable, and
>> pwm driver ensure state of pwm clock synchronized with pwm enabled state.
>>
>> Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: David Wu <david.wu@rock-chips.com>
>> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>> ---
>> drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
>> 1 file changed, 33 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
>> index ef89df1..dbee3c3 100644
>> --- a/drivers/pwm/pwm-rockchip.c
>> +++ b/drivers/pwm/pwm-rockchip.c
>> @@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>> return 0;
>> }
>>
>> +static int rk_pwm_enable(struct pwm_chip *chip,
>> + struct pwm_device *pwm,
>> + bool enable,
>> + enum pwm_polarity polarity)
>
> You didn't change the function name:
>
> s/rk_pwm_enable/rockchip_pwm_enable/
Sorry, it is a pity not to fix in in v2.
>
>> +{
>> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
>> + int ret;
>> +
>> + if (enable) {
>> + ret = clk_enable(pc->clk);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + pc->data->set_enable(chip, pwm, enable, polarity);
>> +
>> + if (!enable)
>> + clk_disable(pc->clk);
>> +
>> + return 0;
>> +}
>> +
>> static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> struct pwm_state *state)
>> {
>> @@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> return ret;
>>
>> if (state->polarity != curstate.polarity && enabled) {
>> - pc->data->set_enable(chip, pwm, false, state->polarity);
>> + ret = rk_pwm_enable(chip, pwm, false, state->polarity);
>> + if (ret)
>> + goto out;
>> enabled = false;
>> }
>>
>> ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
>> if (ret) {
>> if (enabled != curstate.enabled)
>> - pc->data->set_enable(chip, pwm, !enabled,
>> - state->polarity);
>> -
>> + rk_pwm_enable(chip, pwm, !enabled,
>> + state->polarity);
>> goto out;
>> }
>>
>> - if (state->enabled != enabled)
>> - pc->data->set_enable(chip, pwm, state->enabled,
>> - state->polarity);
>> + if (state->enabled != enabled) {
>> + ret = rk_pwm_enable(chip, pwm, state->enabled,
>> + state->polarity);
>> + if (ret)
>> + goto out;
>> + }
>>
>> /*
>> * Update the state with the real hardware, which can differ a bit
>
>
>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state
@ 2017-03-01 11:00 ` David.Wu
0 siblings, 0 replies; 8+ messages in thread
From: David.Wu @ 2017-03-01 11:00 UTC (permalink / raw)
To: linux-arm-kernel
Hi Boris?
? 2017/3/1 18:19, Boris Brezillon ??:
> On Wed, 1 Mar 2017 18:16:02 +0800
> David Wu <david.wu@rock-chips.com> wrote:
>
>> From: "david.wu" <david.wu@rock-chips.com>
>>
>> If the pwm was not enabled at uboot loader, pwm could not work for clock
>> always disabled at pwm driver. The pwm clock is enabled at beginning of
>> pwm_apply(), but disabled at end of pwm_apply().
>>
>> If the pwm was enabled at uboot loader, pwm clock is always enabled unless
>> closed by ATF. The pwm-backlight might turn off the power at early suspend,
>> should disable pwm clock for saving power consume.
>>
>> It is important to provide opportunity to enable/disable clock at pwm driver,
>> the pwm consumer should ensure correct order to call pwm enable/disable, and
>> pwm driver ensure state of pwm clock synchronized with pwm enabled state.
>>
>> Fixes: 2bf1c98aa5a4 ("pwm: rockchip: Add support for atomic update")
>> Cc: stable at vger.kernel.org
>> Signed-off-by: David Wu <david.wu@rock-chips.com>
>> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
>> ---
>> drivers/pwm/pwm-rockchip.c | 40 +++++++++++++++++++++++++++++++++-------
>> 1 file changed, 33 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
>> index ef89df1..dbee3c3 100644
>> --- a/drivers/pwm/pwm-rockchip.c
>> +++ b/drivers/pwm/pwm-rockchip.c
>> @@ -191,6 +191,28 @@ static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
>> return 0;
>> }
>>
>> +static int rk_pwm_enable(struct pwm_chip *chip,
>> + struct pwm_device *pwm,
>> + bool enable,
>> + enum pwm_polarity polarity)
>
> You didn't change the function name:
>
> s/rk_pwm_enable/rockchip_pwm_enable/
Sorry, it is a pity not to fix in in v2.
>
>> +{
>> + struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
>> + int ret;
>> +
>> + if (enable) {
>> + ret = clk_enable(pc->clk);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + pc->data->set_enable(chip, pwm, enable, polarity);
>> +
>> + if (!enable)
>> + clk_disable(pc->clk);
>> +
>> + return 0;
>> +}
>> +
>> static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> struct pwm_state *state)
>> {
>> @@ -207,22 +229,26 @@ static int rockchip_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>> return ret;
>>
>> if (state->polarity != curstate.polarity && enabled) {
>> - pc->data->set_enable(chip, pwm, false, state->polarity);
>> + ret = rk_pwm_enable(chip, pwm, false, state->polarity);
>> + if (ret)
>> + goto out;
>> enabled = false;
>> }
>>
>> ret = rockchip_pwm_config(chip, pwm, state->duty_cycle, state->period);
>> if (ret) {
>> if (enabled != curstate.enabled)
>> - pc->data->set_enable(chip, pwm, !enabled,
>> - state->polarity);
>> -
>> + rk_pwm_enable(chip, pwm, !enabled,
>> + state->polarity);
>> goto out;
>> }
>>
>> - if (state->enabled != enabled)
>> - pc->data->set_enable(chip, pwm, state->enabled,
>> - state->polarity);
>> + if (state->enabled != enabled) {
>> + ret = rk_pwm_enable(chip, pwm, state->enabled,
>> + state->polarity);
>> + if (ret)
>> + goto out;
>> + }
>>
>> /*
>> * Update the state with the real hardware, which can differ a bit
>
>
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-03-01 11:11 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-01 10:16 [PATCH v2] pwm: rockchip: State of pwm clock should synchronize with pwm enabled state David Wu
2017-03-01 10:16 ` David Wu
2017-03-01 10:16 ` David Wu
2017-03-01 10:19 ` Boris Brezillon
2017-03-01 10:19 ` Boris Brezillon
2017-03-01 11:00 ` David.Wu
2017-03-01 11:00 ` David.Wu
2017-03-01 11:00 ` David.Wu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.