[PATCH V1 0/3] refine clock tree for esai in imx6q

[PATCH V1 0/3] refine clock tree for esai in imx6q

[Shengjiu Wang]

This patch series refine the clock tree for esai in imx6q

Shengjiu Wang (3):
  ARM: clk-imx6q: refine clock tree for ESAI
  ARM: clk-imx6q: Add missing lvds2 clock to the clock tree
  ARM: imx6q: Add the clock route from external OSC to ESAI clock

 arch/arm/mach-imx/clk-imx6q.c             |   21 +++++++++++++++++----
 arch/arm/mach-imx/mach-imx6q.c            |   28 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/imx6qdl-clock.h |   12 +++++++++---
 3 files changed, 54 insertions(+), 7 deletions(-)

-- 
1.7.9.5

[PATCH V1 0/3] refine clock tree for esai in imx6q

[Shengjiu Wang]

This patch series refine the clock tree for esai in imx6q

Shengjiu Wang (3):
  ARM: clk-imx6q: refine clock tree for ESAI
  ARM: clk-imx6q: Add missing lvds2 clock to the clock tree
  ARM: imx6q: Add the clock route from external OSC to ESAI clock

 arch/arm/mach-imx/clk-imx6q.c             |   21 +++++++++++++++++----
 arch/arm/mach-imx/mach-imx6q.c            |   28 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/imx6qdl-clock.h |   12 +++++++++---
 3 files changed, 54 insertions(+), 7 deletions(-)

-- 
1.7.9.5

[PATCH V1 1/3] ARM: clk-imx6q: refine clock tree for ESAI

[Shengjiu Wang]

There are three clock for ESAI, esai_extal, esai_ipg, esai_mem. Rename
'esai' to 'esai_extal', 'esai_ahb' to 'esai_mem', and add 'esai_ipg'.
Make the clock for ESAI more clear and align them with imx6sx.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c             |    7 ++++---
 include/dt-bindings/clock/imx6qdl-clock.h |    7 ++++---
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 6cceb77..1d6dd59 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -64,7 +64,7 @@ static const char *cko2_sels[] = {
 	"ipu2", "vdo_axi", "osc", "gpu2d_core",
 	"gpu3d_core", "usdhc2", "ssi1", "ssi2",
 	"ssi3", "gpu3d_shader", "vpu_axi", "can_root",
-	"ldb_di0", "ldb_di1", "esai", "eim_slow",
+	"ldb_di0", "ldb_di1", "esai_extal", "eim_slow",
 	"uart_serial", "spdif", "asrc", "hsi_tx",
 };
 static const char *cko_sels[] = { "cko1", "cko2", };
@@ -325,8 +325,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	else
 		clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
 	clk[IMX6QDL_CLK_ENET]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
-	clk[IMX6QDL_CLK_ESAI]         = imx_clk_gate2_shared("esai",   "esai_podf",         base + 0x6c, 16, &share_count_esai);
-	clk[IMX6QDL_CLK_ESAI_AHB]     = imx_clk_gate2_shared("esai_ahb", "ahb",             base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_EXTAL]   = imx_clk_gate2_shared("esai_extal",   "esai_podf",   base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_IPG]     = imx_clk_gate2_shared("esai_ipg",   "ipg",           base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_MEM]     = imx_clk_gate2_shared("esai_mem", "ahb",             base + 0x6c, 16, &share_count_esai);
 	clk[IMX6QDL_CLK_GPT_IPG]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
 	clk[IMX6QDL_CLK_GPT_IPG_PER]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
 	if (cpu_is_imx6dl())
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 654151e..323e865 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -128,7 +128,7 @@
 #define IMX6Q_CLK_ECSPI5			116
 #define IMX6DL_CLK_I2C4				116
 #define IMX6QDL_CLK_ENET			117
-#define IMX6QDL_CLK_ESAI			118
+#define IMX6QDL_CLK_ESAI_EXTAL			118
 #define IMX6QDL_CLK_GPT_IPG			119
 #define IMX6QDL_CLK_GPT_IPG_PER			120
 #define IMX6QDL_CLK_GPU2D_CORE			121
@@ -218,7 +218,8 @@
 #define IMX6QDL_CLK_LVDS2_SEL			205
 #define IMX6QDL_CLK_LVDS1_GATE			206
 #define IMX6QDL_CLK_LVDS2_GATE			207
-#define IMX6QDL_CLK_ESAI_AHB			208
-#define IMX6QDL_CLK_END				209
+#define IMX6QDL_CLK_ESAI_IPG			208
+#define IMX6QDL_CLK_ESAI_MEM			209
+#define IMX6QDL_CLK_END				210
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
-- 
1.7.9.5

[PATCH V1 1/3] ARM: clk-imx6q: refine clock tree for ESAI

[Shengjiu Wang]

There are three clock for ESAI, esai_extal, esai_ipg, esai_mem. Rename
'esai' to 'esai_extal', 'esai_ahb' to 'esai_mem', and add 'esai_ipg'.
Make the clock for ESAI more clear and align them with imx6sx.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c             |    7 ++++---
 include/dt-bindings/clock/imx6qdl-clock.h |    7 ++++---
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 6cceb77..1d6dd59 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -64,7 +64,7 @@ static const char *cko2_sels[] = {
 	"ipu2", "vdo_axi", "osc", "gpu2d_core",
 	"gpu3d_core", "usdhc2", "ssi1", "ssi2",
 	"ssi3", "gpu3d_shader", "vpu_axi", "can_root",
-	"ldb_di0", "ldb_di1", "esai", "eim_slow",
+	"ldb_di0", "ldb_di1", "esai_extal", "eim_slow",
 	"uart_serial", "spdif", "asrc", "hsi_tx",
 };
 static const char *cko_sels[] = { "cko1", "cko2", };
@@ -325,8 +325,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	else
 		clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5",        "ecspi_root",        base + 0x6c, 8);
 	clk[IMX6QDL_CLK_ENET]         = imx_clk_gate2("enet",          "ipg",               base + 0x6c, 10);
-	clk[IMX6QDL_CLK_ESAI]         = imx_clk_gate2_shared("esai",   "esai_podf",         base + 0x6c, 16, &share_count_esai);
-	clk[IMX6QDL_CLK_ESAI_AHB]     = imx_clk_gate2_shared("esai_ahb", "ahb",             base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_EXTAL]   = imx_clk_gate2_shared("esai_extal",   "esai_podf",   base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_IPG]     = imx_clk_gate2_shared("esai_ipg",   "ipg",           base + 0x6c, 16, &share_count_esai);
+	clk[IMX6QDL_CLK_ESAI_MEM]     = imx_clk_gate2_shared("esai_mem", "ahb",             base + 0x6c, 16, &share_count_esai);
 	clk[IMX6QDL_CLK_GPT_IPG]      = imx_clk_gate2("gpt_ipg",       "ipg",               base + 0x6c, 20);
 	clk[IMX6QDL_CLK_GPT_IPG_PER]  = imx_clk_gate2("gpt_ipg_per",   "ipg_per",           base + 0x6c, 22);
 	if (cpu_is_imx6dl())
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 654151e..323e865 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -128,7 +128,7 @@
 #define IMX6Q_CLK_ECSPI5			116
 #define IMX6DL_CLK_I2C4				116
 #define IMX6QDL_CLK_ENET			117
-#define IMX6QDL_CLK_ESAI			118
+#define IMX6QDL_CLK_ESAI_EXTAL			118
 #define IMX6QDL_CLK_GPT_IPG			119
 #define IMX6QDL_CLK_GPT_IPG_PER			120
 #define IMX6QDL_CLK_GPU2D_CORE			121
@@ -218,7 +218,8 @@
 #define IMX6QDL_CLK_LVDS2_SEL			205
 #define IMX6QDL_CLK_LVDS1_GATE			206
 #define IMX6QDL_CLK_LVDS2_GATE			207
-#define IMX6QDL_CLK_ESAI_AHB			208
-#define IMX6QDL_CLK_END				209
+#define IMX6QDL_CLK_ESAI_IPG			208
+#define IMX6QDL_CLK_ESAI_MEM			209
+#define IMX6QDL_CLK_END				210
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
-- 
1.7.9.5

[PATCH V1 2/3] ARM: clk-imx6q: Add missing lvds2 clock to the clock tree

[Shengjiu Wang]

We actually have lvds2 (analog clock2), an I/O clock like lvds1, in the SoC.
And this lvds2, along with lvds1, can be used to provide external clock source
to the internal pll, such as pll4_audio and pll5_video.

So This patch mainly adds the lvds2 to the clock tree and fix its relationship
with pll4 accordingly.

[ To reduce the risk from code changing. This patch only takes care of pll4
  related part. We might later need to add the relationship with pll5 too. ]

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c             |    9 ++++++++-
 include/dt-bindings/clock/imx6qdl-clock.h |    7 ++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 1d6dd59..927a062 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -73,6 +73,7 @@ static const char *lvds_sels[] = {
 	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
 	"pcie_ref_125m", "sata_ref_100m",
 };
+static const char *pll_av_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
 
 static struct clk *clk[IMX6QDL_CLK_END];
 static struct clk_onecell_data clk_data;
@@ -119,6 +120,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
 	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
 	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+	/* Clock source from external clock via ANACLK1/2 PADs */
+	clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+	clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	base = of_iomap(np, 0);
@@ -136,7 +140,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
 	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
 	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
-	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
+	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"pll4_sel", base + 0x70, 0x7f);
 	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
 	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
 	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
@@ -169,6 +173,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
 	clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[IMX6QDL_CLK_PLL4_SEL]  = imx_clk_mux("pll4_sel",  base + 0x70, 14, 2, pll_av_sels, ARRAY_SIZE(pll_av_sels));
 
 	/*
 	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
@@ -178,6 +183,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 */
 	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
 	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+	clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate("lvds1_in", "anaclk1", base + 0x160, 12);
+	clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate("lvds2_in", "anaclk2", base + 0x160, 13);
 
 	/*                                            name              parent_name        reg       idx */
 	clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 323e865..9530de8 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -220,6 +220,11 @@
 #define IMX6QDL_CLK_LVDS2_GATE			207
 #define IMX6QDL_CLK_ESAI_IPG			208
 #define IMX6QDL_CLK_ESAI_MEM			209
-#define IMX6QDL_CLK_END				210
+#define IMX6QDL_CLK_LVDS1_IN			210
+#define IMX6QDL_CLK_LVDS2_IN			211
+#define IMX6QDL_CLK_ANACLK1			212
+#define IMX6QDL_CLK_ANACLK2			213
+#define IMX6QDL_CLK_PLL4_SEL			214
+#define IMX6QDL_CLK_END				215
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
-- 
1.7.9.5

[PATCH V1 2/3] ARM: clk-imx6q: Add missing lvds2 clock to the clock tree

[Shengjiu Wang]

We actually have lvds2 (analog clock2), an I/O clock like lvds1, in the SoC.
And this lvds2, along with lvds1, can be used to provide external clock source
to the internal pll, such as pll4_audio and pll5_video.

So This patch mainly adds the lvds2 to the clock tree and fix its relationship
with pll4 accordingly.

[ To reduce the risk from code changing. This patch only takes care of pll4
  related part. We might later need to add the relationship with pll5 too. ]

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c             |    9 ++++++++-
 include/dt-bindings/clock/imx6qdl-clock.h |    7 ++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 1d6dd59..927a062 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -73,6 +73,7 @@ static const char *lvds_sels[] = {
 	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
 	"pcie_ref_125m", "sata_ref_100m",
 };
+static const char *pll_av_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
 
 static struct clk *clk[IMX6QDL_CLK_END];
 static struct clk_onecell_data clk_data;
@@ -119,6 +120,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
 	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
 	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
+	/* Clock source from external clock via ANACLK1/2 PADs */
+	clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
+	clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
 	base = of_iomap(np, 0);
@@ -136,7 +140,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
 	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
 	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
-	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
+	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"pll4_sel", base + 0x70, 0x7f);
 	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
 	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
 	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
@@ -169,6 +173,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
 	clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
+	clk[IMX6QDL_CLK_PLL4_SEL]  = imx_clk_mux("pll4_sel",  base + 0x70, 14, 2, pll_av_sels, ARRAY_SIZE(pll_av_sels));
 
 	/*
 	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
@@ -178,6 +183,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 */
 	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
 	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
+	clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate("lvds1_in", "anaclk1", base + 0x160, 12);
+	clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate("lvds2_in", "anaclk2", base + 0x160, 13);
 
 	/*                                            name              parent_name        reg       idx */
 	clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
index 323e865..9530de8 100644
--- a/include/dt-bindings/clock/imx6qdl-clock.h
+++ b/include/dt-bindings/clock/imx6qdl-clock.h
@@ -220,6 +220,11 @@
 #define IMX6QDL_CLK_LVDS2_GATE			207
 #define IMX6QDL_CLK_ESAI_IPG			208
 #define IMX6QDL_CLK_ESAI_MEM			209
-#define IMX6QDL_CLK_END				210
+#define IMX6QDL_CLK_LVDS1_IN			210
+#define IMX6QDL_CLK_LVDS2_IN			211
+#define IMX6QDL_CLK_ANACLK1			212
+#define IMX6QDL_CLK_ANACLK2			213
+#define IMX6QDL_CLK_PLL4_SEL			214
+#define IMX6QDL_CLK_END				215
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
-- 
1.7.9.5

[PATCH V1 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock

[Shengjiu Wang]

This patch mainly adds the clock route from external 24.576MHz OSC to internal
ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an
entirely synchronous clock source against CS42888.

[ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
  we would get noise during the audio playback via ESAI->CS42888 even though
  this generated clock's rate is equal to the external one statistically. It
  might be resulted from the tiny difference between two clock source, which
  might be crucial to the sensitive CODEC we use -- CS42888. So we here apply
  the old 3.0.35 way to feed ESAI the same clock source as CS42888.

  2, Ideally, we should use bypass mode for pll4 since we only need to get
  the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
  entirely supported: The clock rate would be fixed to 24.0MHz if setting to
  bypass, which would cause child clock get an incorrect rate and the driver
  who uses the child clock fail to derive a needed clock rate, and it might
  be dangerous to involve the clk-pllv3.c driver to this fix. Thus we here
  apply 3.0.35 way provisionally. ]

  Expected result:

  anaclk2                 0           1            24576000
   lvds2_in               0           1            24576000
    pll4_sel              0           1            24576000
     pll4_audio           0           1            786432000
      pll4_post_div       0           1            786432000
       pll4_audio_div     0           1            786432000
        esai_sel          0           1            786432000
         esai_pred        0           1            98304000
          esai_podf       0           1            24576000
           esai           0           1            24576000

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c  |    5 +++++
 arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 927a062..2d3634f 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -413,6 +413,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
 	clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL);
 
 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {
@@ -456,6 +460,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	/* Audio-related clocks configuration */
 	clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
+	clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
 
 	/* All existing boards with PCIe use LVDS1 */
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d51c6e9..ea24a96 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -362,6 +362,28 @@ put_node:
 	of_node_put(np);
 }
 
+#define ESAI_AUDIO_MCLK 24576000
+
+static void __init imx6q_audio_lvds2_init(void)
+{
+        struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal;
+
+        pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
+        pll4_sel = clk_get_sys(NULL, "pll4_sel");
+        lvds2_in = clk_get_sys(NULL, "lvds2_in");
+        esai_extal = clk_get_sys(NULL, "esai_extal");
+        if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
+            IS_ERR(lvds2_in) || IS_ERR(esai_extal))
+                return;
+
+        if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
+                return;
+
+        clk_set_parent(pll4_sel, lvds2_in);
+        clk_set_rate(pll4_audio_div, 786432000);
+        clk_set_rate(esai_extal, ESAI_AUDIO_MCLK);
+}
+
 static struct platform_device imx6q_cpufreq_pdev = {
 	.name = "imx6q-cpufreq",
 };
@@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
 		imx6q_opp_init();
 		platform_device_register(&imx6q_cpufreq_pdev);
 	}
+
+	if (of_machine_is_compatible("fsl,imx6q-sabreauto")
+		|| of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
+		imx6q_audio_lvds2_init();
+	}
+
 }
 
 static void __init imx6q_map_io(void)
-- 
1.7.9.5

[PATCH V1 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock

[Shengjiu Wang]

This patch mainly adds the clock route from external 24.576MHz OSC to internal
ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an
entirely synchronous clock source against CS42888.

[ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
  we would get noise during the audio playback via ESAI->CS42888 even though
  this generated clock's rate is equal to the external one statistically. It
  might be resulted from the tiny difference between two clock source, which
  might be crucial to the sensitive CODEC we use -- CS42888. So we here apply
  the old 3.0.35 way to feed ESAI the same clock source as CS42888.

  2, Ideally, we should use bypass mode for pll4 since we only need to get
  the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
  entirely supported: The clock rate would be fixed to 24.0MHz if setting to
  bypass, which would cause child clock get an incorrect rate and the driver
  who uses the child clock fail to derive a needed clock rate, and it might
  be dangerous to involve the clk-pllv3.c driver to this fix. Thus we here
  apply 3.0.35 way provisionally. ]

  Expected result:

  anaclk2                 0           1            24576000
   lvds2_in               0           1            24576000
    pll4_sel              0           1            24576000
     pll4_audio           0           1            786432000
      pll4_post_div       0           1            786432000
       pll4_audio_div     0           1            786432000
        esai_sel          0           1            786432000
         esai_pred        0           1            98304000
          esai_podf       0           1            24576000
           esai           0           1            24576000

Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 arch/arm/mach-imx/clk-imx6q.c  |    5 +++++
 arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 927a062..2d3634f 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -413,6 +413,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
 
 	clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
+	clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL);
 
 	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
 	    cpu_is_imx6dl()) {
@@ -456,6 +460,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 
 	/* Audio-related clocks configuration */
 	clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
+	clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
 
 	/* All existing boards with PCIe use LVDS1 */
 	if (IS_ENABLED(CONFIG_PCI_IMX6))
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index d51c6e9..ea24a96 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -362,6 +362,28 @@ put_node:
 	of_node_put(np);
 }
 
+#define ESAI_AUDIO_MCLK 24576000
+
+static void __init imx6q_audio_lvds2_init(void)
+{
+        struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal;
+
+        pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
+        pll4_sel = clk_get_sys(NULL, "pll4_sel");
+        lvds2_in = clk_get_sys(NULL, "lvds2_in");
+        esai_extal = clk_get_sys(NULL, "esai_extal");
+        if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
+            IS_ERR(lvds2_in) || IS_ERR(esai_extal))
+                return;
+
+        if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
+                return;
+
+        clk_set_parent(pll4_sel, lvds2_in);
+        clk_set_rate(pll4_audio_div, 786432000);
+        clk_set_rate(esai_extal, ESAI_AUDIO_MCLK);
+}
+
 static struct platform_device imx6q_cpufreq_pdev = {
 	.name = "imx6q-cpufreq",
 };
@@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
 		imx6q_opp_init();
 		platform_device_register(&imx6q_cpufreq_pdev);
 	}
+
+	if (of_machine_is_compatible("fsl,imx6q-sabreauto")
+		|| of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
+		imx6q_audio_lvds2_init();
+	}
+
 }
 
 static void __init imx6q_map_io(void)
-- 
1.7.9.5

Re: [PATCH V1 2/3] ARM: clk-imx6q: Add missing lvds2 clock to the clock tree

[Shawn Guo]

On Mon, Aug 04, 2014 at 07:11:14PM +0800, Shengjiu Wang wrote:
> We actually have lvds2 (analog clock2), an I/O clock like lvds1, in the SoC.
> And this lvds2, along with lvds1, can be used to provide external clock source
> to the internal pll, such as pll4_audio and pll5_video.
> 
> So This patch mainly adds the lvds2 to the clock tree and fix its relationship
> with pll4 accordingly.

The patch subject and commit log are slightly different from what code
does.  The code adds both lvds/anaclk clocks as input to SoC.

> 
> [ To reduce the risk from code changing. This patch only takes care of pll4
>   related part. We might later need to add the relationship with pll5 too. ]

I prefer to handles pll5 in the same patch, as they are logically the
same thing.

Shawn

> 
> Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c             |    9 ++++++++-
>  include/dt-bindings/clock/imx6qdl-clock.h |    7 ++++++-
>  2 files changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 1d6dd59..927a062 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -73,6 +73,7 @@ static const char *lvds_sels[] = {
>  	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
>  	"pcie_ref_125m", "sata_ref_100m",
>  };
> +static const char *pll_av_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
>  
>  static struct clk *clk[IMX6QDL_CLK_END];
>  static struct clk_onecell_data clk_data;
> @@ -119,6 +120,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
>  	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
>  	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
> +	/* Clock source from external clock via ANACLK1/2 PADs */
> +	clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
> +	clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
>  
>  	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
>  	base = of_iomap(np, 0);
> @@ -136,7 +140,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
>  	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
>  	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
> -	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
> +	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"pll4_sel", base + 0x70, 0x7f);
>  	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
>  	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
>  	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
> @@ -169,6 +173,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  
>  	clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
>  	clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
> +	clk[IMX6QDL_CLK_PLL4_SEL]  = imx_clk_mux("pll4_sel",  base + 0x70, 14, 2, pll_av_sels, ARRAY_SIZE(pll_av_sels));
>  
>  	/*
>  	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
> @@ -178,6 +183,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	 */
>  	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
>  	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
> +	clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate("lvds1_in", "anaclk1", base + 0x160, 12);
> +	clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate("lvds2_in", "anaclk2", base + 0x160, 13);
>  
>  	/*                                            name              parent_name        reg       idx */
>  	clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
> diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
> index 323e865..9530de8 100644
> --- a/include/dt-bindings/clock/imx6qdl-clock.h
> +++ b/include/dt-bindings/clock/imx6qdl-clock.h
> @@ -220,6 +220,11 @@
>  #define IMX6QDL_CLK_LVDS2_GATE			207
>  #define IMX6QDL_CLK_ESAI_IPG			208
>  #define IMX6QDL_CLK_ESAI_MEM			209
> -#define IMX6QDL_CLK_END				210
> +#define IMX6QDL_CLK_LVDS1_IN			210
> +#define IMX6QDL_CLK_LVDS2_IN			211
> +#define IMX6QDL_CLK_ANACLK1			212
> +#define IMX6QDL_CLK_ANACLK2			213
> +#define IMX6QDL_CLK_PLL4_SEL			214
> +#define IMX6QDL_CLK_END				215
>  
>  #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
> -- 
> 1.7.9.5
> 

[PATCH V1 2/3] ARM: clk-imx6q: Add missing lvds2 clock to the clock tree

[Shawn Guo]

On Mon, Aug 04, 2014 at 07:11:14PM +0800, Shengjiu Wang wrote:
> We actually have lvds2 (analog clock2), an I/O clock like lvds1, in the SoC.
> And this lvds2, along with lvds1, can be used to provide external clock source
> to the internal pll, such as pll4_audio and pll5_video.
> 
> So This patch mainly adds the lvds2 to the clock tree and fix its relationship
> with pll4 accordingly.

The patch subject and commit log are slightly different from what code
does.  The code adds both lvds/anaclk clocks as input to SoC.

> 
> [ To reduce the risk from code changing. This patch only takes care of pll4
>   related part. We might later need to add the relationship with pll5 too. ]

I prefer to handles pll5 in the same patch, as they are logically the
same thing.

Shawn

> 
> Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c             |    9 ++++++++-
>  include/dt-bindings/clock/imx6qdl-clock.h |    7 ++++++-
>  2 files changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 1d6dd59..927a062 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -73,6 +73,7 @@ static const char *lvds_sels[] = {
>  	"pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
>  	"pcie_ref_125m", "sata_ref_100m",
>  };
> +static const char *pll_av_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", };
>  
>  static struct clk *clk[IMX6QDL_CLK_END];
>  static struct clk_onecell_data clk_data;
> @@ -119,6 +120,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0);
>  	clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0);
>  	clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0);
> +	/* Clock source from external clock via ANACLK1/2 PADs */
> +	clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0);
> +	clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0);
>  
>  	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
>  	base = of_iomap(np, 0);
> @@ -136,7 +140,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	clk[IMX6QDL_CLK_PLL1_SYS]      = imx_clk_pllv3(IMX_PLLV3_SYS,	"pll1_sys",	"osc", base,        0x7f);
>  	clk[IMX6QDL_CLK_PLL2_BUS]      = imx_clk_pllv3(IMX_PLLV3_GENERIC,	"pll2_bus",	"osc", base + 0x30, 0x1);
>  	clk[IMX6QDL_CLK_PLL3_USB_OTG]  = imx_clk_pllv3(IMX_PLLV3_USB,	"pll3_usb_otg",	"osc", base + 0x10, 0x3);
> -	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"osc", base + 0x70, 0x7f);
> +	clk[IMX6QDL_CLK_PLL4_AUDIO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll4_audio",	"pll4_sel", base + 0x70, 0x7f);
>  	clk[IMX6QDL_CLK_PLL5_VIDEO]    = imx_clk_pllv3(IMX_PLLV3_AV,	"pll5_video",	"osc", base + 0xa0, 0x7f);
>  	clk[IMX6QDL_CLK_PLL6_ENET]     = imx_clk_pllv3(IMX_PLLV3_ENET,	"pll6_enet",	"osc", base + 0xe0, 0x3);
>  	clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
> @@ -169,6 +173,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  
>  	clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
>  	clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
> +	clk[IMX6QDL_CLK_PLL4_SEL]  = imx_clk_mux("pll4_sel",  base + 0x70, 14, 2, pll_av_sels, ARRAY_SIZE(pll_av_sels));
>  
>  	/*
>  	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
> @@ -178,6 +183,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	 */
>  	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10);
>  	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11);
> +	clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate("lvds1_in", "anaclk1", base + 0x160, 12);
> +	clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate("lvds2_in", "anaclk2", base + 0x160, 13);
>  
>  	/*                                            name              parent_name        reg       idx */
>  	clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus",     base + 0x100, 0);
> diff --git a/include/dt-bindings/clock/imx6qdl-clock.h b/include/dt-bindings/clock/imx6qdl-clock.h
> index 323e865..9530de8 100644
> --- a/include/dt-bindings/clock/imx6qdl-clock.h
> +++ b/include/dt-bindings/clock/imx6qdl-clock.h
> @@ -220,6 +220,11 @@
>  #define IMX6QDL_CLK_LVDS2_GATE			207
>  #define IMX6QDL_CLK_ESAI_IPG			208
>  #define IMX6QDL_CLK_ESAI_MEM			209
> -#define IMX6QDL_CLK_END				210
> +#define IMX6QDL_CLK_LVDS1_IN			210
> +#define IMX6QDL_CLK_LVDS2_IN			211
> +#define IMX6QDL_CLK_ANACLK1			212
> +#define IMX6QDL_CLK_ANACLK2			213
> +#define IMX6QDL_CLK_PLL4_SEL			214
> +#define IMX6QDL_CLK_END				215
>  
>  #endif /* __DT_BINDINGS_CLOCK_IMX6QDL_H */
> -- 
> 1.7.9.5
> 

Re: [PATCH V1 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock

[Shawn Guo]

On Mon, Aug 04, 2014 at 07:11:15PM +0800, Shengjiu Wang wrote:
> This patch mainly adds the clock route from external 24.576MHz OSC to internal
> ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an
> entirely synchronous clock source against CS42888.
> 
> [ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
>   we would get noise during the audio playback via ESAI->CS42888 even though
>   this generated clock's rate is equal to the external one statistically. It
>   might be resulted from the tiny difference between two clock source, which
>   might be crucial to the sensitive CODEC we use -- CS42888. So we here apply
>   the old 3.0.35 way to feed ESAI the same clock source as CS42888.
> 
>   2, Ideally, we should use bypass mode for pll4 since we only need to get
>   the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
>   entirely supported: The clock rate would be fixed to 24.0MHz if setting to
>   bypass, which would cause child clock get an incorrect rate and the driver
>   who uses the child clock fail to derive a needed clock rate, and it might
>   be dangerous to involve the clk-pllv3.c driver to this fix. Thus we here
>   apply 3.0.35 way provisionally. ]

Instead of hacking it around, I consider it's time to properly implement
PLL bypass mode.  It's essentially just another multiplexer.

Shawn

> 
>   Expected result:
> 
>   anaclk2                 0           1            24576000
>    lvds2_in               0           1            24576000
>     pll4_sel              0           1            24576000
>      pll4_audio           0           1            786432000
>       pll4_post_div       0           1            786432000
>        pll4_audio_div     0           1            786432000
>         esai_sel          0           1            786432000
>          esai_pred        0           1            98304000
>           esai_podf       0           1            24576000
>            esai           0           1            24576000
> 
> Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c  |    5 +++++
>  arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 927a062..2d3634f 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -413,6 +413,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
>  
>  	clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL);
>  
>  	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
>  	    cpu_is_imx6dl()) {
> @@ -456,6 +460,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  
>  	/* Audio-related clocks configuration */
>  	clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
> +	clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
>  
>  	/* All existing boards with PCIe use LVDS1 */
>  	if (IS_ENABLED(CONFIG_PCI_IMX6))
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index d51c6e9..ea24a96 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -362,6 +362,28 @@ put_node:
>  	of_node_put(np);
>  }
>  
> +#define ESAI_AUDIO_MCLK 24576000
> +
> +static void __init imx6q_audio_lvds2_init(void)
> +{
> +        struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal;
> +
> +        pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
> +        pll4_sel = clk_get_sys(NULL, "pll4_sel");
> +        lvds2_in = clk_get_sys(NULL, "lvds2_in");
> +        esai_extal = clk_get_sys(NULL, "esai_extal");
> +        if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
> +            IS_ERR(lvds2_in) || IS_ERR(esai_extal))
> +                return;
> +
> +        if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
> +                return;
> +
> +        clk_set_parent(pll4_sel, lvds2_in);
> +        clk_set_rate(pll4_audio_div, 786432000);
> +        clk_set_rate(esai_extal, ESAI_AUDIO_MCLK);
> +}
> +
>  static struct platform_device imx6q_cpufreq_pdev = {
>  	.name = "imx6q-cpufreq",
>  };
> @@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
>  		imx6q_opp_init();
>  		platform_device_register(&imx6q_cpufreq_pdev);
>  	}
> +
> +	if (of_machine_is_compatible("fsl,imx6q-sabreauto")
> +		|| of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
> +		imx6q_audio_lvds2_init();
> +	}
> +
>  }
>  
>  static void __init imx6q_map_io(void)
> -- 
> 1.7.9.5
> 

[PATCH V1 3/3] ARM: imx6q: Add the clock route from external OSC to ESAI clock

[Shawn Guo]

On Mon, Aug 04, 2014 at 07:11:15PM +0800, Shengjiu Wang wrote:
> This patch mainly adds the clock route from external 24.576MHz OSC to internal
> ESAI clock via analog clock2 PADs on the SoC and pll4 so that ESAI can get an
> entirely synchronous clock source against CS42888.
> 
> [ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
>   we would get noise during the audio playback via ESAI->CS42888 even though
>   this generated clock's rate is equal to the external one statistically. It
>   might be resulted from the tiny difference between two clock source, which
>   might be crucial to the sensitive CODEC we use -- CS42888. So we here apply
>   the old 3.0.35 way to feed ESAI the same clock source as CS42888.
> 
>   2, Ideally, we should use bypass mode for pll4 since we only need to get
>   the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
>   entirely supported: The clock rate would be fixed to 24.0MHz if setting to
>   bypass, which would cause child clock get an incorrect rate and the driver
>   who uses the child clock fail to derive a needed clock rate, and it might
>   be dangerous to involve the clk-pllv3.c driver to this fix. Thus we here
>   apply 3.0.35 way provisionally. ]

Instead of hacking it around, I consider it's time to properly implement
PLL bypass mode.  It's essentially just another multiplexer.

Shawn

> 
>   Expected result:
> 
>   anaclk2                 0           1            24576000
>    lvds2_in               0           1            24576000
>     pll4_sel              0           1            24576000
>      pll4_audio           0           1            786432000
>       pll4_post_div       0           1            786432000
>        pll4_audio_div     0           1            786432000
>         esai_sel          0           1            786432000
>          esai_pred        0           1            98304000
>           esai_podf       0           1            24576000
>            esai           0           1            24576000
> 
> Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  arch/arm/mach-imx/clk-imx6q.c  |    5 +++++
>  arch/arm/mach-imx/mach-imx6q.c |   28 ++++++++++++++++++++++++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
> index 927a062..2d3634f 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -413,6 +413,10 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
>  
>  	clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
> +	clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal", NULL);
>  
>  	if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
>  	    cpu_is_imx6dl()) {
> @@ -456,6 +460,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
>  
>  	/* Audio-related clocks configuration */
>  	clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
> +	clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL], clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
>  
>  	/* All existing boards with PCIe use LVDS1 */
>  	if (IS_ENABLED(CONFIG_PCI_IMX6))
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index d51c6e9..ea24a96 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -362,6 +362,28 @@ put_node:
>  	of_node_put(np);
>  }
>  
> +#define ESAI_AUDIO_MCLK 24576000
> +
> +static void __init imx6q_audio_lvds2_init(void)
> +{
> +        struct clk *pll4_sel, *lvds2_in, *pll4_audio_div, *esai_extal;
> +
> +        pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
> +        pll4_sel = clk_get_sys(NULL, "pll4_sel");
> +        lvds2_in = clk_get_sys(NULL, "lvds2_in");
> +        esai_extal = clk_get_sys(NULL, "esai_extal");
> +        if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
> +            IS_ERR(lvds2_in) || IS_ERR(esai_extal))
> +                return;
> +
> +        if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
> +                return;
> +
> +        clk_set_parent(pll4_sel, lvds2_in);
> +        clk_set_rate(pll4_audio_div, 786432000);
> +        clk_set_rate(esai_extal, ESAI_AUDIO_MCLK);
> +}
> +
>  static struct platform_device imx6q_cpufreq_pdev = {
>  	.name = "imx6q-cpufreq",
>  };
> @@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
>  		imx6q_opp_init();
>  		platform_device_register(&imx6q_cpufreq_pdev);
>  	}
> +
> +	if (of_machine_is_compatible("fsl,imx6q-sabreauto")
> +		|| of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
> +		imx6q_audio_lvds2_init();
> +	}
> +
>  }
>  
>  static void __init imx6q_map_io(void)
> -- 
> 1.7.9.5
>