From: Jean-Francois Moine <moinejf-GANU6spQydw@public.gmane.org> To: Dave Airlie <airlied-cv59FeDIM0c@public.gmane.org>, Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>, Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Subject: [PATCH v6 3/5] ARM: dts: sun8i-h3: add HDMI video nodes Date: Sun, 20 Nov 2016 12:20:21 +0100 [thread overview] Message-ID: <cdf50b8433e2d9a053e35f8788bfcd5d41504312.1479641523.git.moinejf@free.fr> (raw) In-Reply-To: <cover.1479641523.git.moinejf-GANU6spQydw@public.gmane.org> Signed-off-by: Jean-Francois Moine <moinejf-GANU6spQydw@public.gmane.org> --- arch/arm/boot/dts/sun8i-h3.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 416b825..7c6b1d5 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -140,6 +140,16 @@ #size-cells = <1>; ranges; + de: de-controller@01000000 { + compatible = "allwinner,sun8i-h3-display-engine"; + reg = <0x01000000 0x400000>; + clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; + clock-names = "bus", "clock"; + resets = <&ccu RST_BUS_DE>; + ports = <&lcd0_p>; + status = "disabled"; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; @@ -149,6 +159,23 @@ #dma-cells = <1>; }; + lcd0: lcd-controller@01c0c000 { + compatible = "allwinner,sun8i-a83t-tcon"; + reg = <0x01c0c000 0x400>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "bus", "clock"; + resets = <&ccu RST_BUS_TCON0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + lcd0_p: port { + lcd0_hdmi: endpoint { + remote-endpoint = <&hdmi_lcd0>; + }; + }; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -314,6 +341,11 @@ clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; + + assigned-clocks = <&ccu CLK_PLL_DE>, + <&ccu CLK_DE>; + assigned-clock-rates = <864000000>, + <432000000>; }; pio: pinctrl@01c20800 { @@ -564,6 +596,25 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + hdmi: hdmi@01ee0000 { + compatible = "allwinner,sun8i-h3-hdmi"; + reg = <0x01ee0000 0x20000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>; + clock-names = "bus", "clock", "ddc-clock"; + resets = <&ccu RST_BUS_HDMI0>, <&ccu RST_BUS_HDMI1>; + reset-names = "hdmi0", "hdmi1"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { /* video */ + reg = <0>; + hdmi_lcd0: endpoint { + remote-endpoint = <&lcd0_hdmi>; + }; + }; + }; + rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; -- 2.10.2
WARNING: multiple messages have this Message-ID (diff)
From: moinejf@free.fr (Jean-Francois Moine) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 3/5] ARM: dts: sun8i-h3: add HDMI video nodes Date: Sun, 20 Nov 2016 12:20:21 +0100 [thread overview] Message-ID: <cdf50b8433e2d9a053e35f8788bfcd5d41504312.1479641523.git.moinejf@free.fr> (raw) In-Reply-To: <cover.1479641523.git.moinejf@free.fr> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> --- arch/arm/boot/dts/sun8i-h3.dtsi | 51 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 416b825..7c6b1d5 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -140,6 +140,16 @@ #size-cells = <1>; ranges; + de: de-controller at 01000000 { + compatible = "allwinner,sun8i-h3-display-engine"; + reg = <0x01000000 0x400000>; + clocks = <&ccu CLK_BUS_DE>, <&ccu CLK_DE>; + clock-names = "bus", "clock"; + resets = <&ccu RST_BUS_DE>; + ports = <&lcd0_p>; + status = "disabled"; + }; + dma: dma-controller at 01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; @@ -149,6 +159,23 @@ #dma-cells = <1>; }; + lcd0: lcd-controller at 01c0c000 { + compatible = "allwinner,sun8i-a83t-tcon"; + reg = <0x01c0c000 0x400>; + clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>; + clock-names = "bus", "clock"; + resets = <&ccu RST_BUS_TCON0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + lcd0_p: port { + lcd0_hdmi: endpoint { + remote-endpoint = <&hdmi_lcd0>; + }; + }; + }; + mmc0: mmc at 01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -314,6 +341,11 @@ clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; + + assigned-clocks = <&ccu CLK_PLL_DE>, + <&ccu CLK_DE>; + assigned-clock-rates = <864000000>, + <432000000>; }; pio: pinctrl at 01c20800 { @@ -564,6 +596,25 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + hdmi: hdmi at 01ee0000 { + compatible = "allwinner,sun8i-h3-hdmi"; + reg = <0x01ee0000 0x20000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI>, + <&ccu CLK_HDMI_DDC>; + clock-names = "bus", "clock", "ddc-clock"; + resets = <&ccu RST_BUS_HDMI0>, <&ccu RST_BUS_HDMI1>; + reset-names = "hdmi0", "hdmi1"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port at 0 { /* video */ + reg = <0>; + hdmi_lcd0: endpoint { + remote-endpoint = <&lcd0_hdmi>; + }; + }; + }; + rtc: rtc at 01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; -- 2.10.2
next prev parent reply other threads:[~2016-11-20 11:20 UTC|newest] Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-20 11:32 [PATCH v6 0/5] drm: sun8i: Add DE2 HDMI video support Jean-Francois Moine 2016-11-20 11:32 ` Jean-Francois Moine [not found] ` <cover.1479641523.git.moinejf-GANU6spQydw@public.gmane.org> 2016-11-20 9:53 ` [PATCH v6 1/5] drm: sun8i: Add a basic DRM driver for Allwinner DE2 Jean-Francois Moine 2016-11-20 9:53 ` Jean-Francois Moine 2016-11-21 16:59 ` Rob Herring 2016-11-21 16:59 ` Rob Herring 2016-11-20 9:56 ` [PATCH v6 2/5] drm: sun8i: add HDMI video support to A83T and H3 Jean-Francois Moine 2016-11-20 9:56 ` Jean-Francois Moine [not found] ` <cea6a5397664213c6a917028ec2e429d25972490.1479641523.git.moinejf-GANU6spQydw@public.gmane.org> 2016-11-21 17:09 ` Rob Herring 2016-11-21 17:09 ` Rob Herring 2016-11-20 11:20 ` Jean-Francois Moine [this message] 2016-11-20 11:20 ` [PATCH v6 3/5] ARM: dts: sun8i-h3: add HDMI video nodes Jean-Francois Moine [not found] ` <cdf50b8433e2d9a053e35f8788bfcd5d41504312.1479641523.git.moinejf-GANU6spQydw@public.gmane.org> 2016-11-25 5:27 ` Icenowy Zheng 2016-11-25 5:27 ` [linux-sunxi] " Icenowy Zheng [not found] ` <6896101480051640-ddF1QkQ5CrZxpj1cXAZ9Bg@public.gmane.org> 2016-11-25 6:57 ` Jean-François Moine 2016-11-25 6:57 ` [linux-sunxi] " Jean-François Moine 2016-11-25 9:41 ` Icenowy Zheng 2016-11-25 9:41 ` Icenowy Zheng [not found] ` <3188681480066911-UANfZzvcKe1uio3avFS2gg@public.gmane.org> 2016-11-25 10:22 ` Jean-Francois Moine 2016-11-25 10:22 ` Jean-Francois Moine [not found] ` <20161125112213.83420594eb435b6bb1a4d164-GANU6spQydw@public.gmane.org> 2016-11-25 10:32 ` Icenowy Zheng 2016-11-25 10:32 ` Icenowy Zheng 2016-11-29 21:57 ` Maxime Ripard 2016-11-29 21:57 ` Maxime Ripard 2016-11-29 22:15 ` Jernej Skrabec 2016-11-20 11:23 ` [PATCH v6 4/5] ARM: dts: sun8i-h3: Add HDMI video to the Banana Pi M2+ Jean-Francois Moine 2016-11-20 11:23 ` Jean-Francois Moine 2016-11-20 11:26 ` [PATCH v6 5/5] ARM: dts: sun8i-h3: Add HDMI video to the Orange PI 2 Jean-Francois Moine 2016-11-20 11:26 ` Jean-Francois Moine 2016-11-21 0:54 ` [PATCH v6 0/5] drm: sun8i: Add DE2 HDMI video support Ondřej Jirman 2016-11-21 0:54 ` [linux-sunxi] " Ondřej Jirman [not found] ` <1c9a02ff-ce6c-7ad7-36fa-8a2ea0b7675e-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org> 2016-11-21 18:14 ` Jean-Francois Moine 2016-11-21 18:14 ` [linux-sunxi] " Jean-Francois Moine [not found] ` <20161121191416.706b80c25d476fa002a001b1-GANU6spQydw@public.gmane.org> 2016-11-21 18:42 ` Ondřej Jirman 2016-11-21 18:42 ` [linux-sunxi] " Ondřej Jirman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=cdf50b8433e2d9a053e35f8788bfcd5d41504312.1479641523.git.moinejf@free.fr \ --to=moinejf-ganu6spqydw@public.gmane.org \ --cc=airlied-cv59FeDIM0c@public.gmane.org \ --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \ --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \ --cc=moinejf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.